Page MenuHome GnuPG
Files F19741759

No OneTemporary
Actions

View Options

diff --git a/NEWS b/NEWS
index 3eaca193..82d49144 100644
--- a/NEWS
+++ b/NEWS
@@ -1,1483 +1,1489 @@
-Noteworthy changes in version 1.5.0 (unreleased)
-------------------------------------------------
+Noteworthy changes in version 1.5.0 (2014-05-21) [C23/A12/R0]
+-------------------------------------------------------------
* On Unices the engine file names are not not anymore hardwired but
- located via the envvar PATH. All configuration options to set the
- name of the engines for configure run are removed.
+ located via the envvar PATH. All options to set the name of the
+ engines for the configure run are removed.
* If GPGME finds the gpgconf binary it defaults to using gpg2 or
whatever gpgconf tells as name for the OpenPGP engine. If gpgconf
is not found, GPGME looks for an engine named "gpg".
- * Add feature to use the gpgme I/O subsystem to run arbitrary
+ * New feature to use the gpgme I/O subsystem to run arbitrary
commands.
- * Add flag to force encryption without the default compression step.
+ * New flag to use encryption without the default compression step.
+
+ * New function to access "gpg-conf --list-dirs"
+
+ * New configure option --enable-fixed-path for use by Android.
+
+ * Support ECC algorithms.
* Interface changes relative to the 1.4.3 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_get_dirinfo NEW.
gpgme_op_spawn_start NEW.
gpgme_op_spawn NEW.
GPGME_PROTOCOL_SPAWN NEW.
GPGME_SPAWN_DETACHED NEW.
GPGME_SPAWN_ALLOW_SET_FG NEW.
GPGME_ENCRYPT_NO_COMPRESS NEW.
GPGME_PK_ECC NEW.
GPGME_MD_SHA224 NEW.
gpgme_subkey_t EXTENDED: New field curve.
GPGME_STATUS_PLAINTEXT_LENGTH NEW.
GPGME_STATUS_MOUNTPOINT NEW.
GPGME_STATUS_PINENTRY_LAUNCHED NEW.
GPGME_STATUS_ATTRIBUTE NEW.
GPGME_STATUS_BEGIN_SIGNING NEW.
GPGME_STATUS_KEY_NOT_CREATED NEW.
-Noteworthy changes in version 1.4.3 (2013-08-12)
-------------------------------------------------
+Noteworthy changes in version 1.4.3 (2013-08-12) [C22/A11/R0]
+-------------------------------------------------------------
* The default engine names are now taken from the output of gpgconf.
If gpgconf is not found the use of gpg 1 is assumed.
* Under Windows the default engines names are first searched in the
installation directory of the gpgme DLL.
* New function gpgme_data_identify to detect the type of a message.
* Interface changes relative to the 1.4.2 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_signers_count NEW.
gpgme_data_type_t NEW.
gpgme_data_identify NEW.
-Noteworthy changes in version 1.4.2 (2013-05-28)
-------------------------------------------------
+Noteworthy changes in version 1.4.2 (2013-05-28) [C21/A10/R0]
+-------------------------------------------------------------
* Allow symmetric encryption with gpgme_op_encrypt_sign.
* Fixed mismatching off_t definitions on Windows.
* Interface changes relative to the 1.4.1 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_off_t NEW.
gpgme_size_t NEW.
GPGME_PROTOCOL_OPENPGP NEW alias.
-Noteworthy changes in version 1.4.1 (2013-05-01)
-------------------------------------------------
+Noteworthy changes in version 1.4.1 (2013-05-01) [C20/A9/R1]
+------------------------------------------------------------
* Fixed reading of gpg.conf files with excessive use of the group
option.
* Fixed building with the i686-w64-mingw32 toolchain.
* Disabled FD passing by default for Apple.
-Noteworthy changes in version 1.4.0 (2013-02-26)
-------------------------------------------------
+Noteworthy changes in version 1.4.0 (2013-02-26) [C20/A9/R0]
+------------------------------------------------------------
* New function gpgme_set_global_flag to help debugging on Android.
* New function gpgme_io_writen as a convenience wrapper around
gpgme_io_write.
* New functions to support the pinentry mode feature of GnuPG 2.1.
* New macro GPGME_VERSION_NUMBER to allow supporting different API
versions without the need for a configure test.
* Several improvements for gpgme-tool.
* Better logging of the common "invalid engine" error code.
* Support for FD passing is now enabled by default. The configure
option --disable-fd-passing may be used to disable this.
* Interface changes relative to the 1.3.1 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GPGME_VERSION_NUMBER NEW.
gpgme_io_writen NEW.
gpgme_set_global_flag NEW.
gpgme_set_pinentry_mode NEW.
gpgme_get_pinentry_mode NEW.
gpgme_pinentry_mode_t NEW.
GPGME_PINENTRY_MODE_DEFAULT NEW.
GPGME_PINENTRY_MODE_ASK NEW.
GPGME_PINENTRY_MODE_CANCEL NEW.
GPGME_PINENTRY_MODE_ERROR NEW.
GPGME_PINENTRY_MODE_LOOPBACK NEW.
Noteworthy changes in version 1.3.2 (2012-05-02)
------------------------------------------------
* Remove support for libgpgme-pth. As far as we know, this was never used,
and GnuPG is going to use our own npth in the future.
* Fix signature summary information for a missing X.509 key.
* Fix parsing of dates >= year 2038.
Noteworthy changes in version 1.3.1 (2011-06-16)
------------------------------------------------
* Ported to Windows CE.
* Detect GPG versions not supporting ---passwd.
* Interface changes relative to the 1.3.0 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GPGME_EXPORT_MODE_MINIMAL NEW
GPGME_STATUS_SUCCESS NEW
gpgme_err_code_from_syserror NEW
gpgme_err_set_errno NEW
gpgme_error_from_errno CHANGED: Return gpgme_error_t (compatible type).
gpgme_error_from_syserror NEW
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 1.3.0 (2010-01-11)
------------------------------------------------
* GPGME does not come with an internal libassuan version anymore.
The external libassuan 1.1.0 release or later is required. For
application programmers on systems that can resolve inter-library
dependencies at runtime, this is a transparent change.
* New engine GPGME_PROTOCOL_G13 to support the new g13 tool.
* New engine GPGME_PROTOCOL_UISERVER to support UI Servers.
* New API to change the passphrase of a key.
* Interface changes relative to the 1.2.0 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GPGME_STATUS_INV_SGNR NEW.
GPGME_STATUS_NO_SGNR NEW.
GPGME_PROTOCOL_G13 NEW.
gpgme_op_g13_mount NEW.
gpgme_g13_result_t NEW.
GPGME_PK_ECDSA NEW.
GPGME_PK_ECDH NEW.
gpgme_op_passwd_start NEW.
gpgme_op_passwd NEW.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 1.2.0 (2009-06-18)
------------------------------------------------
* New encryption flag GPGME_ENCRYPT_NO_ENCRYPT_TO to disable default
recipients.
* gpgme_new will fail if gpgme_check_version was not called, or a
selftest failed (for example, if -mms-bitfields was not used on
MingW32 targets).
* New functions gpgme_io_read and gpgme_io_write for use with
gpgme_passphrase_cb_t and gpgme_edit_cb_t functions.
* New functions gpgme_result_ref and gpgme_result_unref to detach
result structures from a context.
* New functions gpgme_op_export_keys_start and gpgme_op_export_keys
that allow to specify exported keys through gpgme_key_t objects
instead of patterns.
* New mode of operation gpgme_export_mode_t that allows exporting
external keys.
* Interface changes relative to the 1.1.7 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GPGME_KEYLIST_MODE_EPHEMERAL NEW.
GPGME_PROTOCOL_ASSUAN NEW.
gpgme_assuan_data_cb_t NEW.
gpgme_assuan_inquire_cb_t NEW.
gpgme_assuan_status_cb_t NEW.
gpgme_op_assuan_transact_start NEW.
gpgme_op_assuan_transact NEW.
gpgme_op_assuan_result NEW.
gpgme_op_import_keys NEW.
gpgme_op_import_keys_start NEW.
gpgme_subkey_t EXTENDED: New fields is_cardkey, card_number.
GPGME_ENCRYPT_NO_ENCRYPT_TO NEW.
gpgme_check_version CHANGED: Is now a macro.
gpgme_new EXTENDED: More failure codes.
gpgme_io_read NEW.
gpgme_io_write NEW.
gpgme_result_ref NEW.
gpgme_result_unref NEW.
gpgme_export_mode_t NEW.
gpgme_export_ext_start EXTENDED: Arg RESERVED is now a MODE flag.
gpgme_op_export EXTENDED: Arg RESERVED is now a MODE flag.
gpgme_op_export_ext_start EXTENDED: Arg RESERVED is now a MODE flag.
gpgme_op_export_ext EXTENDED: Arg RESERVED is now a MODE flag.
gpgme_op_export_keys_start NEW.
gpgme_op_export_keys NEW.
GPGME_DATA_ENCODING_URL NEW.
GPGME_DATA_ENCODING_URL0 NEW.
GPGME_DATA_ENCODING_URLESC NEW.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 1.1.8 (2008-12-08)
------------------------------------------------
* SIGPIPE is now again ignored as described in the manual. Fixes
regresion introduced with 1.1.6.
Noteworthy changes in version 1.1.7 (2008-10-17)
------------------------------------------------
* Using GPGME_KEYLIST_MODE_LOCAL combined with
GPGME_KEYLIST_MODE_EXTERN is now supported; it uses the
--locate-keys feature of gpg (>= 2.0.10).
* The encoding of gpgme_data_t objects can affect the output encoding
of export, sign and encrypt operations now (the same operations
that are also affected by the ASCII mode switch). We believe this
change in the ABI is innocent enough not to break existing
applications (it only affects the S/MIME backend on certain
operations).
* The reference manual now includes the specification of "The GnuPG
UI Server protocol".
* A new function gpgme_cancel_async can be used to asynchronously
cancel any pending operation at any time, from any thread.
* Interface changes relative to the 1.1.6 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_op_encrypt CHANGED: Output encoding can affect result.
gpgme_op_encrypt_start CHANGED: Output encoding can affect result.
gpgme_op_encrypt_sign CHANGED: Output encoding can affect result.
gpgme_op_encrypt_sign_start CHANGED: Output encoding can affect result.
gpgme_op_sign CHANGED: Output encoding can affect result.
gpgme_op_sign_start CHANGED: Output encoding can affect result.
gpgme_op_export CHANGED: Output encoding can affect result.
gpgme_op_export_start CHANGED: Output encoding can affect result.
gpgme_op_export_ext CHANGED: Output encoding can affect result.
gpgme_op_export_ext_start CHANGED: Output encoding can affect result.
gpgme_cancel_async NEW
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 1.1.6 (2008-01-04)
------------------------------------------------
* Bug fixes for for W32.
* A new, experimental (and thus undocumented and potentially
unstable) interface for accessing gpg-conf through GPGME has been
added.
* Interface changes relative to the 1.1.1 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_signature_t EXTENDED: New field chain_model.
gpgme_op_getauditlog_start NEW.
gpgme_op_getauditlog NEW.
GPGME_AUDITLOG_HTML NEW.
GPGME_AUDITLOG_WITH_HELP NEW.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 1.1.5 (2007-07-09)
------------------------------------------------
* Bug and portability fixes (mainly for W32).
Noteworthy changes in version 1.1.4 (2007-03-05)
------------------------------------------------
* Detect and bail out on double plaintext messages. This is required
so that applications can properly detect the signed parts of a
message. Actual there is now a double protection as GnuPG 1.4.7
will detect this case too.
Noteworthy changes in version 1.1.3 (2007-01-29)
------------------------------------------------
* Fixed a memory leak in gpgme_data_release_and_get_mem.
* Fixed a bug in Windows command line quoting.
Noteworthy changes in version 1.1.2 (2006-03-02)
------------------------------------------------
* Fixed a bug in the W32 glib backend.
Noteworthy changes in version 1.1.1 (2006-02-23)
------------------------------------------------
* Fixed a bug in that the fingerprints of subkeys are not available.
* Clarified usage of the SECRET flag in key listings. It is now
reset for stub keys.
* Reading signature notations and policy URLs on key signatures is
supported. They can be found in the new field notations of the
gpgme_key_sig_t structure. This has to be enabled with the keylist
mode flag GPGME_KEYLIST_MODE_SIG_NOTATIONS.
* A new gpgme_free() function solves the problem of using different
allocators in a single program. This function should now be used
instead calling free() to release the buffer returned by
gpgme_data_release_and_get_mem. It is recommended that you always
do this, but it is only necessary on certain platforms, so backwards
compatibility is provided. In other words: If free() worked for
you before, it will keep working.
* New status codes GPGME_PKA_TRUST_GOOD and GPGME_PKA_TRUST_BAD.
They are analyzed by the verify handlers and made available in the
new PKA_TRUST and PKA_ADDRESS fields of the signature result structure.
* Interface changes relative to the 1.1.0 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_key_sig_t EXTENDED: New field notations.
GPGME_KEYLIST_MODE_SIG_NOTATIONS NEW
gpgme_free NEW
GPGME_STATUS_PKA_TRUST_BAD NEW
GPGME_STATUS_PKA_TRUST_GOOD NEW
gpgme_signature_t EXTENDED: New field pka_trust.
gpgme_signature_t EXTENDED: New field pka_address.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 1.1.0 (2005-10-01)
------------------------------------------------
* You can now configure the backend engine file name and home
directory to be used, as default and per context.
* Information about the recipients of an encrypted text is now
available at decryption time.
* New status GPGME_STATUS_PLAINTEXT. This is analyzed by the decrypt
and verify handlers, the information about the plaintext filename,
if available is made available in the new field file_name of the
respective result structure.
* The code for "automagically detecting the thread library" has been
removed from libgpgme. It is deprecated since version 0.4.3.
Since then, you had to link against libgpgme-pthread for
applications using pthread and libgpgme-pth for applications using
GNU Pth.
The code was removed because it caused compilation problems on
systems where the pthread.h header from GNU Pth is available in
addition to the system header (FreeBSD 6 and later for example).
* "./autogen.sh --build-w32" does now build gpgme.dll.
* [W32] The environment variable GPGME_DEBUG now uses a semicolon as
delimiter. The standard install directory is used when locating
gpg or gpgsm before finally falling back to the hardwired name.
* There is a new flag for keys and subkeys, is_qualified, which
indicates if a key can be used for qualified signatures according
to local government regulations.
* You can associate a filename with a data object using the new
function gpgme_data_set_file_name(). This filename will be stored
in the output when encrypting or signing the data and will be
returned when decrypting or verifying the output data.
* You can now set notation data at signature creation with the new
function gpgme_sig_notation_add().
* Interface changes relative to the 1.0.3 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_set_engine_info NEW
gpgme_ctx_get_engine_info NEW
gpgme_ctx_set_engine_info NEW
gpgme_recipient_t NEW
gpgme_decrypt_result_t EXTENDED: New field recipients.
gpgme_verify_result_t EXTENDED: New fields pubkey_algo, hash_algo.
gpgme_decrypt_result_t EXTENDED: New field plaintext_filename.
gpgme_verify_result_t EXTENDED: New field plaintext_filename.
GPGME_STATUS_PLAINTEXT NEW
gpgme_key_t EXTENDED: New field is_qualified.
gpgme_subkey_t EXTENDED: New field is_qualified.
gpgme_data_get_file_name NEW
gpgme_data_set_file_name NEW
gpgme_sig_notation_flags_t NEW
GPGME_SIG_NOTATION_HUMAN_READABLE NEW
GPGME_SIG_NOTATAION_CRITICAL NEW
gpgme_sig_notation_clear NEW
gpgme_sig_notation_add NEW
gpgme_sig_notation_get NEW
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 1.0.3 (2005-06-20)
------------------------------------------------
* Previousy, GPGME would use a default "include certs" of 1. This
has been changed. Now GPGME will use the crypto backend engines
default unless you set the value with gpgme_set_include_certs()
explicitely. A new macro GPGME_INCLUDE_CERTS_DEFAULT can be used
as a value to explicitely request the new default behaviour.
Because the default changes, this is a slight change of the API
semantics. We consider it to be a bug fix.
* A bug which made GPGME hang has been fixed. If you have
experienced hanging before, please try out this version and let me
know if you still experience hanging problems.
* Interface changes relative to the 0.9.0 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_set_include_certs CHANGED DEFAULT
GPGME_INCLUDE_CERTS_DEFAULT NEW
GPGME_STATUS_SIG_SUBPACKET NEW
GPGME_STATUS_NEED_PASSPHRASE_PIN NEW
GPGME_STATUS_SC_OP_FAILURE NEW
GPGME_STATUS_SC_OP_SUCCESS NEW
GPGME_STATUS_CARDCTRL NEW
GPGME_STATUS_BACKUP_KEY_CREATED NEW
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 1.0.2 (2004-12-28)
------------------------------------------------
* Changed the license of the library to the GNU Lesser General Public
License (LGPL), version 2.1 or later.
Noteworthy changes in version 1.0.1 (2004-10-22)
------------------------------------------------
* Only bug fixes.
Noteworthy changes in version 1.0.0 (2004-09-30)
------------------------------------------------
* Version 1.0.0! We are proud to present you with a thoroughly
tested and stable version of the GPGME library. A big Thank You!
to all the people who made this possible.
The development will be branched into a stable 1.x.y series and the
head.
* The gpgme.m4 macro supports checking the API version. Just prepend
it to the required version string, separated by a colon. For
example, this release has the version "1:1.0.0". The last release
to which this version is (mostly) ABI compatible is "1:0.4.2",
which is the default required version.
Noteworthy changes in version 0.9.0 (2004-06-08)
------------------------------------------------
* The type gpgme_key_t has now a new field keylist_mode that contains
the keylist mode that was active at the time the key was retrieved.
* The type gpgme_decrypt_result_t has a new field "wrong_key_usage"
that contains a flag indicating that the key should not have been
used for encryption.
* Verifying a signature of a revoked key gives the correct result now
(GPG_ERR_CERT_REVOKED error code).
* Clarified that the error code GPG_ERR_NO_DATA from the decrypt &
verify operations still allows you to look at the signature
verification result.
* Clarified that patterns in keylisting operations have an upper
limit, and thus are not suited to list many keys at once by their
fingerprint. Also improve the error message if the pattern is too
long for the CMS protocol to handle.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_key_t EXTENDED: New field keylist_mode.
gpgme_decrypt_result_t EXTENDED: New field wrong_key_usage.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.4.7 (2004-04-29)
------------------------------------------------
* Correctly initialize the fields expired, revoked, invalid, and
disabled in the gpgme_key_t structures.
* A bug fix: The flag wrong_key_usage of gpgme_signature_t was
accidently of type int instead unsigned int.
* Interface changes relative to the 0.4.5 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_signature_t CHANGED: wrong_key_usage is unsigned int now.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.4.6 (2004-04-06)
------------------------------------------------
* Bug fixes
Noteworthy changes in version 0.4.5 (2004-03-07)
------------------------------------------------
* GPGME is now compiled with LFS (large file support) by default.
This means that _all_ programs using GPGME must be compiled with
LFS support enabled by default. You can do this easily with
autoconf, by using the AC_SYS_LARGEFILE macro. Or you can do this
without autoconf by defining the preprocessor symbol
_FILE_OFFSET_BITS to 64 (by passing the -D_FILE_OFFSET_BITS=64 to
the C compiler command line, or by defining this preprocessor
symbol before including any system header files). For more
details, read the section on LFS in the manual.
Up to now, it was undocumented that GPGME was not using LFS.
But the public interfaces use off_t, and file descriptors are
exchanged between the application and GPGME. This was an oversight,
and bound to cause troubles in the future.
Writing GPGME as a dual mode library that seamlessly supports LFS
while keeping backwards compatibility is possible, but does not
solve the problem: Many applications already expect GPGME to have
LFS (they are compiled with off_t being a 64bit value). This is true
in particular for the popular Gtk+ and Qt programs.
So, although this is an ABI (but not an API) break, we will not
change the library version to reflect that. Because the interfaces
affected are probably not used yet in any GPGME 0.4 based
application, we don't expect any real failures from this change.
In fact, applications already using LFS will have some subtle bugs
fixed.
However, if you encounter an application using GPGME 0.4.x that
does _not_ use LFS by default (off_t is a 32bit value), _and_
uses at least one of the functions gpgme_data_seek,
gpgme_data_new_from_filepart, or a gpgme_data_seek_cb_t with
gpgme_data_new_from_cbs, then indeed this library will be ABI
incompatible with the program. As said above, we don't believe
such a program exists. If we are in error, then you have two
options: As a quick hack, you can configure GPGME with the
--disable-largefile option. This will revert the change, and GPGME
will not use LFS. However, GPGME will be incompatible with
programs that expect GPGME to use LFS. All applications are
required to use LFS when using GPGME, so this is only good as a
temporary local work-around.
The other option is to change the versioning of the library and
recompile all applications. We have reserved a special version of
the library for that, so you can do that without expecting a
version clash in the future. Furthermore, everyone who does this
will agree on the version to use (this is important for
distribution makers). Read the comment in configure.ac (before
LIBGPGME_LT_AGE) if you want to do this. Please don't do this
blindly: As stated above, we think it is unlikely this measure is
needed. Still, it is there if necessary. If in doubt, contact us
and we will give our advise for your specific situation.
* New key listing mode GPGME_KEYLIST_MODE_VALIDATE for validation of
the listed keys.
* New interface gpgme_cancel() that can be used to cancel
asynchronous operations.
* Interface changes relative to the 0.4.4 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_data_seek_cb_t CHANGED: off_t is now a largefile type.
gpgme_data_seek CHANGED: off_t is now a largefile type.
gpgme_data_new_from_filepart CHANGED: off_t is now a largefile type.
GPGME_KEYLIST_MODE_VALIDATE NEW
gpgme_cancel NEW
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.4.4 (2004-01-12)
------------------------------------------------
* The member "class" in gpgme_key_sig_t and gpgme_new_signature_t has
been renamed to "sig_class", to avoid clash with C++ compilers. In
the C API, the old name "class" has been preserved for backwards
compatibility, but is deprecated.
* Interface changes relative to the 0.4.3 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_key_sig_t CHANGED: class deprecated, use new sig_class.
gpgme_new_signature_t CHANGED: class deprecated, use new sig_class.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.4.3 (2003-10-06)
------------------------------------------------
* libgpgme should not be used for threaded programs anymore. This
never worked reliably in all cases, because you had to
be careful about the linking order and libtool wouldn't do that for
you automatically. Instead, now you have to link against
libgpgme-pthread for applications using pthread and libgpgme-pth for
applications using GNU Pth.
The old code for automagically detecting the thread library is
still part of libgpgme, but it is DEPRECATED.
* There are new automake macros AM_PATH_GPGME_PTH and
AM_PATH_GPGME_PTHREAD, which support checking for thread-enabled
versions of GPGME. They define GPGME_PTH_CFLAGS, GPGME_PTH_LIBS,
GPGME_PTHREAD_CFLAGS and GPGME_PTHREAD_LIBS respectively. These
variables of course also include the configuration for the thread
package itself. Alternatively, use libtool.
* gpgme_strerror_r as a thread safe variant of gpgme_strerror was
added.
* gpgme-config doesn't support setting the prefix or exec prefix
anymore. I don't think it ever worked correctly, and it seems to
be pointless.
* gpgme_get_key fails with GPG_ERR_AMBIGUOUS_NAME if the key ID
provided was not unique, instead returning the first matching key.
* gpgme_key_t and gpgme_subkey_t have a new field, can_authenticate,
that indicates if the key can be used for authentication.
* gpgme_signature_t's status field is now correctly set to an error
with error code GPG_ERR_NO_PUBKEY if public key is not found.
* gpgme_new_signature_t's class field is now an unsigned int, rather
than an unsigned long (the old class field is preserved for
backwards compatibility).
* A new function gpgme_set_locale() is provided to allow configuring
the locale for the crypto backend. This is necessary for text
terminals so that programs like the pinentry can be started with
the right locale settings for the terminal the application is running
on, in case the terminal has different settings than the system
default (for example, if it is a remote terminal). You are highly
recommended to call the following functions directly after
gpgme_check_version:
#include <locale.h>
setlocale (LC_ALL, "");
gpgme_set_locale (NULL, LC_CTYPE, setlocale (LC_CTYPE, NULL));
gpgme_set_locale (NULL, LC_MESSAGES, setlocale (LC_MESSAGES, NULL));
GPGME can not do this for you, as setlocale is not thread safe, and
there is no alternative.
* The signal action for SIGPIPE is now set to SIG_IGN by
gpgme_check_version, instead the first time a crypto engine is
started (which is not well defined).
* In the output of gpgme_hash_algo_name, change RMD160 to RIPEMD160,
TIGER to TIGER192, CRC32-RFC1510 to CRC32RFC1510, and CRC24-RFC2440
to CRC24RFC2440. For now, these strings can be used as the MIC
parameter for PGP/MIME (if appropriately modified).
* Interface changes relative to the 0.4.2 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_strerror_t NEW
gpgme_get_key CHANGED: Fails correctly if key ID not unique.
gpgme_key_t EXTENDED: New field can_authenticate.
gpgme_subkey_t EXTENDED: New field can_authenticate.
gpgme_new_signature_t CHANGED: New type for class field.
gpgme_set_locale NEW
gpgme_hash_algo_name CHANGED: Slight adjustment of algo names.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.4.2 (2003-07-30)
------------------------------------------------
* Allow gpg-error to be in non-standard place when linking the test suite.
* Configure will fail now if gpg-error can not be found.
* Fixed initialized memory backed data objects for writing, which
caused the test program to crash (but only on Mac OS, surprisingly).
* Eliminate use of C99 constructs.
* Small improvements to the manual.
Noteworthy changes in version 0.4.1 (2003-06-06)
------------------------------------------------
This is the release that 0.4.0 should have been. There are many
interface changes, please see below for the details. The changes are
sometimes the result of new functionality, but more often express a
paradigm shift. Others are an overdue cleanup to get GPGME in line
with the GNU coding standards and to make the interface more
self-consistent. Here is an overview on the changes:
All types have been renamed to conform to the GNU coding standards,
most of the time by keeping the whole name in lowercase and inserting
underscores between words.
All operations consistently only accept input parameters in their
invocation function, and return only an error code directly. Further
information about the result of the operation has to be retrieved
afterwards by calling one of the result functions. This unifies the
synchronous and the asynchronous interface.
The error values have been completely replaced by a more
sophisticated model that allows GPGME to transparently and accurately
report all errors from the other GnuPG components, irregardless of
process boundaries. This is achieved by using the library
libgpg-errors, which is shared by all GnuPG components. This library
is now required for GPGME.
The results of all operations are now provided by pointers to C
structs rather than by XML structs or in other ways.
Objects which used to be opaque (for example a key) are now pointers
to accessible structs, so no accessor functions are necessary.
Backward compatibility is provided where it was possible without too
much effort and did not collide with the overall sanitization effort.
However, this is only for ease of transition. NO DEPRECATED FUNCTION
OR DATA TYPE IS CONSIDERED A PART OF THE API OR ABI AND WILL BE
DROPPED IN THE FUTURE WITHOUT CHANGING THE SONAME OF THE LIBRARY.
Recommendations how to replace deprecated or removed functionality
can be found within the description of each change.
What follows are all changes to the interface and behaviour of GPGME
in detail.
* If gpgme.h is included in sources compiled by GCC 3.1 or later,
deprecated attributes will warn about use of obsolete functions and
type definitions. You can suppress these warnings by passing
-Wno-deprecated-declarations to the gcc command.
* The following types have been renamed. The old types are still
available as aliases, but they are deprecated now:
Old name: New name:
GpgmeCtx gpgme_ctx_t
GpgmeData gpgme_data_t
GpgmeError gpgme_error_t
GpgmeDataEncoding gpgme_data_encoding_t
GpgmeSigStat gpgme_sig_stat_t
GpgmeSigMode gpgme_sig_mode_t
GpgmeAttr gpgme_attr_t
GpgmeValidity gpgme_validity_t
GpgmeProtocol gpgme_protocol_t
GpgmeKey gpgme_key_t
GpgmePassphraseCb gpgme_passphrase_cb_t
GpgmeProgressCb gpgme_progress_cb_t
GpgmeIOCb gpgme_io_cb_t
GpgmeRegisterIOCb gpgme_register_io_cb_t
GpgmeRemoveIOCb gpgme_remove_io_cb_t
GpgmeEventIO gpgme_event_io_t
GpgmeEventIOCb gpgme_event_io_cb_t
GpgmeIOCbs gpgme_io_cbs
GpgmeDataReadCb gpgme_data_read_cb_t
GpgmeDataWriteCb gpgme_data_write_cb_t
GpgmeDataSeekCb gpgme_data_seek_cb_t
GpgmeDataReleaseCb gpgme_data_release_cb_t
GpgmeDataCbs gpgme_data_cbs_t
GpgmeTrustItem gpgme_trust_item_t
GpgmeStatusCode gpgme_status_code_t
* gpgme_error_t is now identical to gpg_error_t, the error type
provided by libgpg-error. More about using libgpg-error with GPGME
can be found in the manual. All error symbols have been removed!
* All functions and types in libgpg-error have been wrapped in GPGME.
The new types are gpgme_err_code_t and gpgme_err_source_t. The new
functions are gpgme_err_code, gpgme_err_source, gpgme_error,
gpgme_err_make, gpgme_error_from_errno, gpgme_err_make_from_errno,
gpgme_err_code_from_errno, gpgme_err_code_to_errno,
gpgme_strsource.
* GPGME_ATTR_IS_SECRET is not anymore representable as a string.
* GnuPG 1.2.2 is required. The progress callback is now also invoked
for encrypt, sign, encrypt-sign, decrypt, verify, and
decrypt-verify operations. For verify operations on detached
signatures, the progress callback is invoked for both the detached
signature and the plaintext message, though.
* gpgme_passphrase_cb_t has been changed to not provide a complete
description, but the UID hint, passphrase info and a flag
indicating if this is a repeated attempt individually, so the user
can compose his own description from this information.
The passphrase is not returned as a C string, but must be written
to a file descriptor directly. This allows for secure passphrase
entries.
The return type has been changed to gpgme_error_t value. This
allowed to remove the gpgme_cancel function; just return
the error code GPG_ERR_CANCELED in the passphrase callback directly.
* gpgme_edit_cb_t has been changed to take a file descriptor argument.
The user is expected to write the response to the file descriptor,
followed by a newline.
* The recipients interface has been removed. Instead, you use
NULL-terminated lists of keys for specifying the recipients of an
encryption operation. Use the new encryption flag
GPGME_ENCRYPT_ALWAYS_TRUST if you want to override the validity of
the keys (but note that in general this is not a good idea).
This change has been made to the prototypes of gpgme_op_encrypt,
gpgme_op_encrypt_start, gpgme_op_encrypt_sign and
gpgme_op_encrypt_sign_start.
The export interface has been changed to use pattern strings like
the keylist interface. Thus, new functions gpgme_op_export_ext and
gpgme_op_export_ext_start have been added as well. Now the
prototypes of gpgme_op_export_start and gpgme_op_export finally
make sense.
* gpgme_op_verify and gpgme_op_decrypt_verify don't return a status
summary anymore. Use gpgme_get_sig_status to retrieve the individual
stati.
* gpgme_io_cb_t changed from a void function to a function returning
a gpgme_error_t value. However, it will always return 0, so you
can safely ignore the return value.
* A new I/O callback event GPGME_EVENT_START has been added. The new
requirement is that you must wait until this event until you are
allowed to call the I/O callback handlers previously registered for
this context operation. Calling I/O callback functions for this
context operation before the start event happened is unsafe because
it can lead to race conditions in a multi-threaded environment.
* The idle function feature has been removed. It was not precisely
defined in a multi-threaded environment and is obsoleted by the
user I/O callback functions. If you still need a simple way to
call something while waiting on one or multiple asynchronous
operations to complete, don't set the HANG flag in gpgme_wait (note
that this will return to your program more often than the idle
function did).
* gpgme_wait can return NULL even if hang is true, if an error
occurs. In that case *status contains the error code.
* gpgme_get_engine_info was radically changed. Instead an XML
string, an info structure of the new type gpgme_engine_info_t is
returned. This makes it easier and more robust to evaluate the
information in an application.
* The new function gpgme_get_protocol_name can be used to convert a
gpgme_protocol_t value into a string.
* The status of a context operation is not checked anymore. Starting
a new operation will silently cancel the previous one. Calling a
function that requires you to have started an operation before without
doing so is undefined.
* The FPR argument to gpgme_op_genkey was removed. Instead, use the
gpgme_op_genkey_result function to retrieve a gpgme_genkey_result_t
pointer to a structure which contains the fingerprint. This also
works with gpgme_op_genkey_start. The structure also provides
other information about the generated keys.
So, instead:
char *fpr;
err = gpgme_op_genkey (ctx, NULL, NULL, &fpr);
if (!err && fpr)
printf ("%s\n", fpr);
you should now do:
gpgme_genkey_result_t result;
err = gpgme_op_genkey (ctx, NULL, NULL);
if (!err)
{
result = gpgme_op_genkey_result (ctx);
if (result->fpr)
printf ("%s\n", result->fpr);
}
* The new gpgme_op_import_result function provides detailed
information about the result of an import operation in
gpgme_import_result_t and gpgme_import_status_t objects.
Thus, the gpgme_op_import_ext variant is deprecated.
* The new gpgme_op_sign_result function provides detailed information
about the result of a signing operation in gpgme_sign_result_t,
gpgme_invalid_key_t and gpgme_new_signature_t objects.
* The new gpgme_op_encrypt_result function provides detailed
information about the result of an encryption operation in
a GpgmeEncryptResult object.
* The new gpgme_op_decrypt_result function provides detailed
information about the result of a decryption operation in
a GpgmeDecryptResult object.
* The new gpgme_op_verify_result function provides detailed
information about the result of an verify operation in
a GpgmeVerifyResult object. Because of this, the GPGME_SIG_STAT_*
values, gpgme_get_sig_status, gpgme_get_sig_ulong_attr,
gpgme_get_sig_string_attr and gpgme_get_sig_key are now deprecated,
and gpgme_get_notation is removed.
* GpgmeTrustItem objects have now directly accessible data, so the
gpgme_trust_item_get_string_attr and gpgme_trust_item_get_ulong_attr
accessor functions are deprecated. Also, reference counting is
available through gpgme_trust_item_ref and gpgme_trust_item_unref
(the gpgme_trust_item_release alias for the latter is deprecated).
* Keys are not cached internally anymore, so the force_update argument
to gpgme_get_key has been removed.
* GpgmeKey objects have now directly accessible data so the
gpgme_key_get_string_attr, gpgme_key_get_ulong_attr,
gpgme_key_sig_get_string_attr and gpgme_key_sig_get_ulong_attr
functions are deprecated. Also, gpgme_key_release is now
deprecated. The gpgme_key_get_as_xml function has been dropped.
* Because all interfaces using attributes are deprecated, the
GpgmeAttr data type is also deprecated.
* The new gpgme_op_keylist_result function provides detailed
information about the result of a key listing operation in
a GpgmeKeyListResult object.
* Now that each function comes with its own result retrieval
interface, the generic gpgme_get_op_info interface is not useful
anymore and dropped.
* The type and mode of data objects is not available anymore.
* Interface changes relative to the 0.4.0 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GpgmeCtx DEPRECATED: Use gpgme_ctx_t.
GpgmeData DEPRECATED: Use gpgme_data_t.
GpgmeError DEPRECATED: Use gpgme_error_t.
GpgmeDataEncoding DEPRECATED: Use gpgme_data_encoding_t.
GpgmeSigStat DEPRECATED: Use gpgme_sig_stat_t.
GpgmeSigMode DEPRECATED: Use gpgme_sig_mode_t.
GpgmeAttr DEPRECATED: Use gpgme_attr_t.
GpgmeValidity DEPRECATED: Use gpgme_validity_t.
GpgmeProtocol DEPRECATED: Use gpgme_protocol_t.
GpgmeKey DEPRECATED: Use gpgme_key_t.
GpgmePassphraseCb DEPRECATED: Use gpgme_passphrase_cb_t.
GpgmeProgressCb DEPRECATED: Use gpgme_progress_cb_t.
GpgmeIOCb DEPRECATED: Use gpgme_io_cb_t.
GpgmeRegisterIOCb DEPRECATED: Use gpgme_register_io_cb_t.
GpgmeRemoveIOCb DEPRECATED: Use gpgme_remove_io_cb_t.
GpgmeEventIO DEPRECATED: Use gpgme_event_io_t.
GpgmeEventIOCb DEPRECATED: Use gpgme_event_io_cb_t.
GpgmeIOCbs DEPRECATED: Use gpgme_io_cbs.
GpgmeDataReadCb DEPRECATED: Use gpgme_data_read_cb_t.
GpgmeDataWriteCb DEPRECATED: Use gpgme_data_write_cb_t.
GpgmeDataSeekCb DEPRECATED: Use gpgme_data_seek_cb_t.
GpgmeDataReleaseCb DEPRECATED: Use gpgme_data_release_cb_t.
GpgmeDataCbs DEPRECATED: Use gpgme_data_cbs_t.
GpgmeTrustItem DEPRECATED: Use gpgme_trust_item_t.
GpgmeStatusCode DEPRECATED: Use gpgme_status_code_t.
gpgme_ctx_t NEW
gpgme_data_t NEW
gpgme_recipients_t NEW
gpgme_error_t NEW
gpgme_data_encoding_t NEW
gpgme_sig_stat_t NEW
gpgme_sig_mode_t NEW
gpgme_attr_t NEW
gpgme_validity_t NEW
gpgme_protocol_t NEW
gpgme_key_t NEW
gpgme_passphrase_cb_t NEW
gpgme_progress_cb_t NEW
gpgme_io_cb_t NEW
gpgme_register_io_cb_t NEW
gpgme_remove_io_cb_t NEW
gpgme_event_io_t NEW
gpgme_event_io_cb_t NEW
gpgme_io_cbs NEW
gpgme_data_read_cb_t NEW
gpgme_data_write_cb_t NEW
gpgme_data_seek_cb_t NEW
gpgme_data_release_cb_t NEW
gpgme_data_cbs_t NEW
gpgme_trust_item_t NEW
gpgme_status_code_t NEW
GPGME_{some error code} REMOVED! Use GPG_ERR_* from libgpg-error.
gpgme_err_code_t NEW
gpgme_err_source_t NEW
gpgme_err_code NEW
gpgme_err_source NEW
gpgme_error NEW
gpgme_err_make NEW
gpgme_error_from_errno NEW
gpgme_err_make_from_errno NEW
gpgme_err_code_from_errno NEW
gpgme_err_code_to_errno NEW
gpgme_strsource NEW
gpgme_io_cb_t CHANGED: Return type from void to GpgmeError.
gpgme_event_io_t CHANGED: New event type (all numbers changed).
gpgme_passphrase_cb_t CHANGED: Desc decomposed, write directly to FD.
gpgme_edit_cb_t CHANGED: Write directly to FD.
gpgme_key_get_string_attr CHANGED: Don't handle GPGME_ATTR_IS_SECRET.
gpgme_op_verify CHANGED: Drop R_STAT argument.
gpgme_op_decrypt_verify CHANGED: Drop R_STAT argument.
gpgme_wait CHANGED: Can return NULL even if hang is true.
GpgmeIdleFunc REMOVED
gpgme_register_idle REMOVED
GpgmeRecipients REMOVED
gpgme_recipients_new REMOVED
gpgme_recipients_release REMOVED
gpgme_recipients_add_name REMOVED
gpgme_recipients_add_name_with_validity REMOVED
gpgme_recipients_count REMOVED
gpgme_recipients_enum_open REMOVED
gpgme_recipients_enum_read REMOVED
gpgme_recipients_enum_close REMOVED
gpgme_encrypt_flags_t NEW
GPGME_ENCRYPT_ALWAYS_TRUST NEW
gpgme_op_encrypt CHANGED: Recipients passed as gpgme_key_t[].
gpgme_op_encrypt_start CHANGED: Recipients passed as gpgme_key_t[].
gpgme_op_encrypt_sign CHANGED: Recipients passed as gpgme_key_t[].
gpgme_op_encrypt_sign_start CHANGED: Recipients passed as gpgme_key_t[].
gpgme_op_export_start CHANGED: User IDs passed as patterns.
gpgme_op_export CHANGED: User IDs passed as patterns.
gpgme_op_export_ext_start NEW
gpgme_op_export_ext NEW
gpgme_keylist_mode_t NEW
gpgme_sigsum_t NEW
gpgme_engine_info_t NEW
gpgme_get_engine_info CHANGED: Return info structure instead XML.
gpgme_get_protocol_name NEW
gpgme_cancel REMOVED: Return error in callback directly.
gpgme_op_genkey CHANGED: FPR argument dropped.
gpgme_op_genkey_result NEW
gpgme_genkey_result_t NEW
gpgme_op_import_ext DEPRECATED: Use gpgme_op_import_result.
gpgme_op_import_result NEW
gpgme_import_status_t NEW
gpgme_import_result_t NEW
gpgme_pubkey_algo_t NEW
gpgme_hash_algo_t NEW
gpgme_invalid_key_t NEW
gpgme_new_signature_t NEW
gpgme_sign_result_t NEW
gpgme_op_sign_result NEW
gpgme_pubkey_algo_name NEW
gpgme_hash_algo_name NEW
gpgme_encrypt_result_t NEW
gpgme_op_encrypt_result NEW
gpgme_decrypt_result_t NEW
gpgme_op_decrypt_result NEW
gpgme_verify_result_t NEW
gpgme_op_verify_result NEW
gpgme_get_notation REMOVED: Access verify result directly instead.
gpgme_get_sig_key DEPRECATED: Use gpgme_get_key with fingerprint.
gpgme_get_sig_ulong_attr DEPRECATED: Use verify result directly.
gpgme_get_sig_string_attr DEPRECATED: Use verify result directly.
GPGME_SIG_STAT_* DEPRECATED: Use error value in sig status.
gpgme_get_sig_status DEPRECATED: Use verify result directly.
gpgme_trust_item_t CHANGED: Now has user accessible data members.
gpgme_trust_item_ref NEW
gpgme_trust_item_unref NEW
gpgme_trust_item_release DEPRECATED: Use gpgme_trust_item_unref.
gpgme_trust_item_get_string_attr DEPRECATED
gpgme_trust_item_get_ulong_attr DEPRECATED
gpgme_get_key CHANGED: Removed force_update argument.
gpgme_subkey_t NEW
gpgme_key_sig_t NEW
gpgme_user_id_t NEW
gpgme_key_t CHANGED: Now has user accessible data members.
gpgme_key_get_string_attr DEPRECATED
gpgme_key_get_ulong_attr DEPRECATED
gpgme_key_sig_get_string_attr DEPRECATED
gpgme_key_sig_get_ulong_attr DEPRECATED
gpgme_key_get_as_xml REMOVED
gpgme_key_list_result_t NEW
gpgme_op_keylist_result NEW
gpgme_get_op_info REMOVED
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.4.0 (2002-12-23)
------------------------------------------------
* Key generation returns the fingerprint of the generated key.
* New convenience function gpgme_get_key.
* Supports signatures of user IDs in keys via the new
GPGME_KEYLIST_MODE_SIGS keylist mode and the
gpgme_key_sig_get_string_attr and gpgme_key_sig_get_ulong_attr
interfaces. The XML info about a key also includes the signatures
if available.
* New data object interface, which is more flexible and transparent.
* Interface changes relative to the 0.3.9 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GpgmeDataReadCb NEW
GpgmeDataWriteCb NEW
GpgmeDataSeekCb NEW
GpgmeDataReleaseCb NEW
GpgmeDataCbs NEW
gpgme_data_read CHANGED: Match read() closely.
gpgme_data_write CHANGED: Match write() closely.
gpgme_data_seek NEW
gpgme_data_new_from_fd NEW
gpgme_data_new_from_stream NEW
gpgme_data_new_from_cbs NEW
gpgme_data_rewind DEPRECATED: Replaced by gpgme_data_seek().
gpgme_data_new_from_read_cb DEPRECATED: Replaced by gpgme_data_from_cbs().
gpgme_data_get_type REMOVED: No replacement.
gpgme_op_verify CHANGED: Take different data objects for
signed text and plain text.
gpgme_op_verify_start CHANGED: See gpgme_op_verify.
gpgme_check_engine REMOVED: Deprecated since 0.3.0.
gpgme_op_genkey CHANGED: New parameter FPR.
GPGME_KEYLIST_MODE_SIGS NEW
gpgme_key_sig_get_string_attr NEW
gpgme_key_sig_get_ulong_attr NEW
gpgme_get_key NEW
GPGME_ATTR_SIG_CLASS NEW
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.3.16 (2003-11-19)
-------------------------------------------------
* Compatibility fixes for GnuPG 1.9.x
Noteworthy changes in version 0.3.15 (2003-02-18)
-------------------------------------------------
* The progress status is sent via the progress callbacks in
gpgme_op_edit.
* Bug fix for signing operations with explicit signer settings for
the CMS protocol.
Noteworthy changes in version 0.3.14 (2002-12-04)
-------------------------------------------------
* GPGME-Plug is now in its own package "cryptplug".
* Workaround for a setlocale problem. Fixed a segv related to not
correctly as closed marked file descriptors.
Noteworthy changes in version 0.3.13 (2002-11-20)
-------------------------------------------------
* Release due to changes in gpgmeplug.
Noteworthy changes in version 0.3.12 (2002-10-15)
-------------------------------------------------
* Fixed some bux with key listings.
* The development has been branched to clean up some API issues.
This 0.3 series will be kept for compatibility reasons; so do don't
expect new features.
Noteworthy changes in version 0.3.11 (2002-09-20)
-------------------------------------------------
* Bug fixes.
Noteworthy changes in version 0.3.10 (2002-09-02)
-------------------------------------------------
* Setting the signing keys for the CMS protocol does now work.
* The signers setting is honoured by gpgme_op_edit.
Noteworthy changes in version 0.3.9 (2002-08-21)
------------------------------------------------
* A spec file for creating RPMs has been added.
* An experimental interface to GnuPG's --edit-key functionality is
introduced, see gpgme_op_edit.
* The new gpgme_import_ext function provides a convenient access to
the number of processed keys.
* Interface changes relative to the 0.3.8 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GpgmeStatusCode NEW
GpgmeEditCb NEW
gpgme_op_edit_start NEW
gpgme_op_edit NEW
gpgme_op_import_ext NEW
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.3.8 (2002-06-25)
------------------------------------------------
* It is possible to use an outside event loop for the I/O to the
crypto engine by setting the I/O callbacks with gpgme_set_io_cbs.
* Interface changes relative to the 0.3.6 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GpgmeIOCb NEW
GpgmeRegisterIOCb NEW
GpgmeRemoveIOCb NEW
GpgmeEventIO NEW
GpgmeEventIOCb NEW
struct GpgmeIOCbs NEW
gpgme_set_io_cbs NEW
gpgme_get_io_cbs NEW
GPGME_ATTR_ERRTOK NEW
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.3.7 (2002-06-04)
------------------------------------------------
* GPGME_ATTR_OTRUST is implemented now.
* A first step toward thread safeness has been achieved, see the
documentation for details. Supported thread libraries are pthread
and Pth.
Noteworthy changes in version 0.3.6 (2002-05-03)
------------------------------------------------
* All error output of the gpgsm backend is send to the bit bucket.
* The signature verification functions are extended. Instead of
always returning GPGME_SIG_STATUS_GOOD, the functions new codes for
expired signatures. 2 new functions may be used to retrieve more
detailed information like the signature expiration time and a
validity information of the key without an extra key looking.
* The current passphrase callback and progress meter callback can be
retrieved with the new functions gpgme_get_passphrase_cb and
gpgme_get_progress_cb respectively.
* Interface changes relative to the 0.3.5 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_get_passphrase_cb NEW
gpgme_get_progress_cb NEW
GpgmeDataEncoding NEW
gpgme_data_set_encoding NEW
gpgme_data_get_encoding NEW
GPGME_SIG_STAT_GOOD_EXP NEW
GPGME_SIG_STAT_GOOD_EXPKEY NEW
gpgme_op_verify CHANGED: Returns more status codes.
GPGME_ATTR_SIG_STATUS NEW
gpgme_get_sig_string_attr NEW
gpgme_get_sig_ulong_attr NEW
gpgme_get_protocol NEW
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.3.5 (2002-04-01)
------------------------------------------------
* gpgme_op_encrypt can be called with RECIPIENTS being 0. In this
case, symmetric encryption is performed. Note that this requires a
passphrase from the user.
* More information is returned for X.509 certificates.
* Interface changes relative to the 0.3.4 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_op_encrypt EXTENDED: Symmetric encryption possible
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.3.4 (2002-03-04)
------------------------------------------------
* gpgme_op_encrypt does now fail with GPGME_Invalid_Recipients if
some recipients have been invalid, whereas earlier versions
succeeded in this case. The plaintext is still encrypted for all valid
recipients, so the application might take this error as a hint that
the ciphertext is not usable for all requested recipients.
Information about invalid recipients is available with gpgme_get_op_info.
* gpgme_op_verify now allows to pass an uninitialized data object as
its plaintext argument to check for normal and cleartext
signatures. The plaintext is then returned in the data object.
* New interfaces gpgme_set_include_certs and gpgme_get_include_certs
to set and get the number of certifications to include in S/MIME
signed messages.
* New interfaces gpgme_op_encrypt_sign and gpgme_op_encrypt_sign_start
to encrypt and sign a message in a combined operation.
* New interface gpgme_op_keylist_ext_start to search for multiple patterns.
* gpgme_key_get_ulong_attr supports the GPGME_ATTR_EXPIRE attribute.
* Interface changes relative to the 0.3.3 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_op_encrypt CHANGED: Can fail with GPGME_Invalid_Recipients
gpgme_op_verify EXTENDED: Accepts uninitialized text argument
gpgme_key_get_ulong_attr EXTENDED: Supports GPGME_ATTR_EXPIRE
gpgme_set_include_certs NEW
gpgme_get_include_certs NEW
gpgme_op_encrypt_sign NEW
gpgme_op_encrypt_sign_start NEW
gpgme_op_keylist_ext_start NEW
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.3.3 (2002-02-12)
------------------------------------------------
* Fix the Makefile in jnlib.
* Fix the test suite (hopefully). It should clean up all its state
with `make check' now.
Noteworthy changes in version 0.3.2 (2002-02-10)
------------------------------------------------
* Remove erroneous dependency on libgcrypt in jnlib.
Noteworthy changes in version 0.3.1 (2002-02-09)
------------------------------------------------
* There is a Texinfo manual documenting the API.
* The gpgme_set_keylist_mode function returns an error, and changed
its meaning. It is no longer usable to select between normal and
fast mode (newer versions of GnuPG will always be fast), but
selects between local keyring, remote keyserver, or both.
For this, two new macros are defined, GPGME_KEYLIST_MODE_LOCAL
and GPGME_KEYLIST_MODE_EXTERN. To make it possible to modify the
current setting, a fucntion gpgme_get_keylist_mode was added to
retrieve the current mode.
* gpgme_wait accepts a new argument STATUS to return the error status
of the operation on the context. Its definition is closer to
waitpid() now than before.
* The LENGTH argument to gpgme_data_new_from_filepart changed its
type from off_t to the unsigned size_t.
* The R_HD argument to the GpgmePassphraseCb type changed its type
from void* to void**.
* New interface gpgme_op_trustlist_end() to match
gpgme_op_keylist_end().
* The CryptPlug modules have been renamed to gpgme-openpgp and
gpgme-smime, and they are installed in pkglibdir by `make install'.
* An idle function can be registered with gpgme_register_idle().
* The GpgSM backend supports key generation with gpgme_op_genkey().
* Interface changes relative to the 0.3.0 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_data_new_from_filepart CHANGED: Type of LENGTH is size_t.
GpgmePassphraseCb CHANGED: Type of R_HD is void **.
gpgme_wait CHANGED: New argument STATUS.
gpgme_set_keylist_mode CHANGED: Type of return value is GpgmeError.
The function has a new meaning!
gpgme_get_keylist_mode NEW
GPGME_KEYLIST_MODE_LOCAL NEW
GPGME_KEYLIST_MODE_EXTERN NEW
gpgme_op_trustlist_next NEW
GpgmeIdleFunc NEW
gpgme_register_idle NEW
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.3.0 (2001-12-19)
------------------------------------------------
* New interface gpgme_set_protocol() to set the protocol and thus the
crypto engine to be used by the context. Currently, the OpenPGP
and the CMS protocols are supported. They are specified by the new
preprocessor symbols GPGME_PROTOCOL_OpenPGP and GPGME_PROTOCOL_CMS.
A new context uses the OpenPGP engine by default.
* gpgme_get_engine_info() returns information for all crypto engines
compiled into the library. The XML format has changed. To
reliably get the version of a crypto engine, the <version> tag
after the appropriate <protocol> tag has to be looked for.
* New interface gpgme_engine_check_version(), obsoleting
gpgme_check_engine(). Check the version of all engines you are
supporting in your software.
* GpgmeKey lists the user ids in the order as they are returned by
GnuPG, first the primary key with index 0, then the sub-user ids.
* New operation gpgme_op_decrypt_verify() to decrypt and verify
signatures simultaneously.
* The new interface gpgme_op_keylist_end() terminates a pending
keylist operation. A keylist operation is also terminated when
gpgme_op_keylist_next() returns GPGME_EOF.
* GPGME can be compiled without GnuPG being installed (`--with-gpg=PATH'),
cross-compiled, or even compiled without support for GnuPG
(`--without-gpg').
* GPGME can be compiled with support for GpgSM (GnuPG for S/MIME,
`--with-gpgsm=PATH'). It is enabled by default if the `gpgsm' is found
in the path, but it can also be compiled without support for GpgSM
(`--without-gpgsm').
* CryptPlug modules for GPGME are included and can be enabled at
configure time (`--enable-gpgmeplug'). There is one module which
uses the GnuPG engine (`gpgmeplug') and one module which uses the
GpgSM engine (`gpgsmplug').
* Interface changes relative to the latest 0.2.x release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme_key_get_as_xml CHANGED: Sub-user ids reversed in order.
gpgme_key_get_string_attr CHANGED: User ids reversed in order.
gpgme_key_get_ulong_attr CHANGED: User ids reversed in order.
gpgme_get_engine_info CHANGED: New format, extended content.
gpgme_engine_check_version NEW
gpgme_decrypt_verify_start NEW
gpgme_decrypt_verify NEW
gpgme_op_keylist_next NEW
gpgme_set_protocol NEW
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Noteworthy changes in version 0.2.3 (2001-09-17)
------------------------------------------------
* New function gpgme_get_op_info which can be used to get the micalg
parameter needed for MOSS.
* New functions gpgme_get_armor and gpgme_get_textmode.
* The usual bug fixes and some minor functionality improvements.
* Added a simple encryption component for MS-Windows; however the
build procedure might have some problems.
Noteworthy changes in version 0.2.2 (2001-06-12)
------------------------------------------------
* Implemented a key cache.
* Fixed a race condition under W32 and some other bug fixes.
Noteworthy changes in version 0.2.1 (2001-04-02)
------------------------------------------------
* Changed debug output and GPGME_DEBUG variable (gpgme/debug.c)
* Handle GnuPG's new key capabilities output and support revocation
et al. attributes
* Made the W32 support more robust.
Copyright 2001, 2002, 2003, 2004, 2005, 2007, 2008, 2009,
2010 g10 Code GmbH
This file is free software; as a special exception the author gives
unlimited permission to copy and/or distribute it, with or without
modifications, as long as this notice is preserved.
This file is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
diff --git a/README b/README
index 3b39215f..a16a0669 100644
--- a/README
+++ b/README
@@ -1,113 +1,109 @@
GPGME - GnuPG Made Easy
---------------------------
- Copyright 2004, 2006, 2010, 2012, 2013 g10 Code GmbH
+ Copyright 2004, 2006, 2010, 2012, 2013, 2014 g10 Code GmbH
This file is free software; as a special exception the author gives
unlimited permission to copy and/or distribute it, with or without
modifications, as long as this notice is preserved.
This file is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.
Introduction
--------------
GnuPG Made Easy (GPGME) is a C language library that allows to add
support for cryptography to a program. It is designed to make access
to public key crypto engines like GnuPG or GpgSM easier for
applications. GPGME provides a high-level crypto API for encryption,
decryption, signing, signature verification and key management.
GPGME uses GnuPG and GpgSM as its backends to support OpenPGP and the
Cryptographic Message Syntax (CMS).
GPGME runs best on GNU/Linux or *BSD systems. Other Unices may
require small portability fixes, please send us your patches.
See the files COPYING, COPYING.LESSER, and each file for copyright and
warranty information. The file AUTHORS has a list of authors and
useful web and mail addresses.
Installation
--------------
See the file INSTALL for generic installation instructions.
Check that you have unmodified sources. See below on how to do this.
Don't skip it - this is an important step!
To build GPGME, you need to install libgpg-error (>= 1.11) and
Libassuan (>= 2.0.2).
For support of the OpenPGP protocol (default), you should use the
latest version of GnuPG (>= 1.4) , available at:
-ftp://ftp.gnupg.org/gcrypt/gnupg/
-For support of the CMS (Cryptographic Message Syntax) protocol, you
+ftp://ftp.gnupg.org/gcrypt/gnupg/. For support of the CMS
+(Cryptographic Message Syntax) protocol and lot of other features, you
need a GnuPG version >= 2.0.
-On some platforms GPGME based applications might hang at certain
-operations when using GPGME_PROTOCOL_CMS. A workaround for this
-problem is to build with the configure option --disable-fd-passing.
-
For building the GIT version of GPGME please see the file README.GIT
for more information.
How to Verify the Source
--------------------------
In order to check that the version of GPGME which you are going to
install is an original and unmodified one, you can do it in one of the
following ways:
a) If you have a trusted Version of GnuPG installed, you can simply check
the supplied signature:
$ gpg --verify gpgme-x.y.z.tar.gz.sig
This checks that the detached signature gpgme-x.y.z.tar.gz.sig is
indeed a a signature of gpgme-x.y.z.tar.gz. The key used to create
this signature is either of:
"pub 2048R/4F25E3B6 2011-01-12 Werner Koch (dist sig)"
"pub 1024D/87978569 1999-05-13
Marcus Brinkmann <Marcus.Brinkmann@ruhr-uni-bochum.de>
Marcus Brinkmann <mb@g10code.com>"
If you do not have this key, you can get it from any keyserver. You
have to make sure that this is really the key and not a faked one.
You can do this by comparing the output of:
$ gpg --fingerprint 0x4F25E3B6
with the fingerprint published elsewhere.
b) If you don't have any of the above programs, you have to verify
the SHA1 checksum:
$ sha1sum gpgme-x.y.z.tar.gz
This should yield an output _similar_ to this:
fd9351b26b3189c1d577f0970f9dcadc3412def1 gpgme-x.y.z.tar.gz
Now check that this checksum is _exactly_ the same as the one
published via the announcement list and probably via Usenet.
Documentation
---------------
For information how to use the library you can read the info manual,
which is also a reference book, in the doc/ directory. The programs
in the tests/gpg/ directory may also prove useful.
Please subscribe to the gnupg-devel@gnupg.org mailing list if you want
to do serious work.
For hacking on GPGME, please have a look at doc/HACKING.
diff --git a/configure.ac b/configure.ac
index 11118492..f3d3195a 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,638 +1,638 @@
# configure.ac for GPGME
# Copyright (C) 2000 Werner Koch (dd9jn)
# Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
# 2009, 2010, 2011, 2012, 2013 g10 Code GmbH
#
# This file is part of GPGME.
#
# GPGME is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as
# published by the Free Software Foundation; either version 2.1 of the
# License, or (at your option) any later version.
#
# GPGME is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General
# Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see <http://www.gnu.org/licenses/>.
# (Process this file with autoconf to produce a configure script.)
AC_PREREQ(2.59)
min_automake_version="1.11"
# To build a release you need to create a tag with the version number
# (git tag -s gpgme-n.m.k) and run "./autogen.sh --force". Please
# bump the version number immediately after the release and do another
# commit and push so that the git magic is able to work. See below
# for the LT versions.
m4_define(mym4_version_major, [1])
m4_define(mym4_version_minor, [5])
m4_define(mym4_version_micro, [0])
# Below is m4 magic to extract and compute the revision number, the
# decimalized short revision number, a beta version string, and a flag
# indicating a development version (mym4_isgit). Note that the m4
# processing is done by autoconf and not during the configure run.
m4_define(mym4_version,
[mym4_version_major.mym4_version_minor.mym4_version_micro])
m4_define([mym4_revision],
m4_esyscmd([git rev-parse --short HEAD | tr -d '\n\r']))
m4_define([mym4_revision_dec],
m4_esyscmd_s([echo $((0x$(echo ]mym4_revision[|head -c 4)))]))
m4_define([mym4_betastring],
m4_esyscmd_s([git describe --match 'gpgme-[0-9].*[0-9]' --long|\
awk -F- '$3!=0{print"-beta"$3}']))
m4_define([mym4_isgit],m4_if(mym4_betastring,[],[no],[yes]))
m4_define([mym4_full_version],[mym4_version[]mym4_betastring])
AC_INIT([gpgme],[mym4_full_version],[http://bugs.gnupg.org])
# LT Version numbers, remember to change them just *before* a release.
# (Code changed: REVISION++)
# (Interfaces added/removed/changed: CURRENT++, REVISION=0)
# (Interfaces added: AGE++)
# (Interfaces removed/changed: AGE=0)
#
-LIBGPGME_LT_CURRENT=22
+LIBGPGME_LT_CURRENT=23
# Subtract 2 from this value if you want to make the LFS transition an
# ABI break. [Note to self: Remove this comment with the next regular break.]
-LIBGPGME_LT_AGE=11
+LIBGPGME_LT_AGE=12
LIBGPGME_LT_REVISION=0
# If the API is changed in an incompatible way: increment the next counter.
GPGME_CONFIG_API_VERSION=1
##############################################
NEED_GPG_ERROR_VERSION=1.11
NEED_LIBASSUAN_API=2
NEED_LIBASSUAN_VERSION=2.0.2
PACKAGE=$PACKAGE_NAME
VERSION=$PACKAGE_VERSION
AC_CONFIG_AUX_DIR([build-aux])
AC_CONFIG_MACRO_DIR([m4])
AC_CONFIG_SRCDIR(src/gpgme.h.in)
AC_CONFIG_HEADER(config.h)
# Note: For automake 1.13 add the option
# serial-tests
AM_INIT_AUTOMAKE
AM_MAINTAINER_MODE
AC_CANONICAL_HOST
AM_SILENT_RULES
# Enable GNU extensions on systems that have them.
AC_GNU_SOURCE
AH_VERBATIM([_REENTRANT],
[/* To allow the use of GPGME in multithreaded programs we have to use
special features from the library.
IMPORTANT: gpgme is not yet fully reentrant and you should use it
only from one thread. */
#ifndef _REENTRANT
# define _REENTRANT 1
#endif])
AC_PROG_CC
AC_PROG_CXX
# Note: A suitable gitlog-to-changelog script can be found in GnuPG master.
AC_CHECK_PROGS(GITLOG_TO_CHANGELOG, gitlog-to-changelog, [gitlog-to-changelog])
AC_SUBST(LIBGPGME_LT_CURRENT)
AC_SUBST(LIBGPGME_LT_AGE)
AC_SUBST(LIBGPGME_LT_REVISION)
AC_SUBST(PACKAGE)
AC_SUBST(VERSION)
AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of this package])
AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version of this package])
VERSION_NUMBER=m4_esyscmd(printf "0x%02x%02x%02x" mym4_version_major \
mym4_version_minor mym4_version_micro)
AC_SUBST(VERSION_NUMBER)
# Don't default to build static libs.
LT_PREREQ([2.2.6])
LT_INIT([win32-dll disable-static])
LT_LANG([Windows Resource])
# For now we hardcode the use of version scripts. It would be better
# to write a test for this or even implement this within libtool.
have_ld_version_script=no
case "${host}" in
*-*-linux*)
have_ld_version_script=yes
;;
*-*-gnu*)
have_ld_version_script=yes
;;
*-apple-darwin*)
AC_DEFINE(_XOPEN_SOURCE, 500, Activate POSIX interface on MacOS X)
;;
esac
AM_CONDITIONAL(HAVE_LD_VERSION_SCRIPT, test "$have_ld_version_script" = "yes")
GPG_DEFAULT=no
GPGSM_DEFAULT=no
GPGCONF_DEFAULT=no
G13_DEFAULT=no
component_system=None
have_dosish_system=no
have_android_system=no
have_w32_system=no
have_w64_system=no
build_w32_glib=no
build_w32_qt=no
case "${host}" in
x86_64-*mingw32*)
have_w64_system=yes
;;
*-mingw32ce*)
have_w32ce_system=yes
;;
*-linux-androideabi)
have_android_system=yes
;;
esac
case "${host}" in
*-mingw32ce*|*-mingw32*)
have_dosish_system=yes
have_w32_system=yes
GPG_DEFAULT='c:\\gnupg\\gpg.exe'
GPGSM_DEFAULT='c:\\gnupg\\gpgsm.exe'
GPGCONF_DEFAULT='c:\\gnupg\\gpgconf.exe'
G13_DEFAULT='c:\\gnupg\\g13.exe'
#component_system='COM+'
AM_PATH_GLIB_2_0
AC_ARG_ENABLE(w32-glib,
AC_HELP_STRING([--enable-w32-glib], [build GPGME Glib for W32]),
build_w32_glib=$enableval)
# Check disabled, because the qt-dev packages in gpg4win do
# not provide any support for cross compilation.
# PKG_CHECK_MODULES(QT4_CORE, QtCore)
# Use it like this:
# ./configure --enable-w32-qt QT4_CORE_CFLAGS="..." QT4_CORE_LIBS="..."
AC_SUBST(QT4_CORE_CFLAGS)
AC_SUBST(QT4_CORE_LIBS)
AC_ARG_ENABLE(w32-qt,
AC_HELP_STRING([--enable-w32-qt], [build GPGME Qt for W32]),
build_w32_qt=$enableval)
;;
*)
AC_CHECK_LIB(pthread,pthread_create,have_pthread=yes)
if test "$have_pthread" = yes; then
AC_DEFINE(HAVE_PTHREAD, ,[Define if we have pthread.])
fi
# XXX: Probably use exec-prefix here?
# GPG_DEFAULT='/usr/bin/gpg'
# GPGSM_DEFAULT='/usr/bin/gpgsm'
# GPGCONF_DEFAULT='/usr/bin/gpgconf'
# G13_DEFAULT='/usr/bin/g13'
;;
esac
if test "$have_dosish_system" = yes; then
AC_DEFINE(HAVE_DOSISH_SYSTEM,1,
[Defined if we run on some of the PCDOS like systems
(DOS, Windoze. OS/2) with special properties like
no file modes])
fi
AM_CONDITIONAL(HAVE_DOSISH_SYSTEM, test "$have_dosish_system" = yes)
if test "$have_w32_system" = yes; then
AC_DEFINE(HAVE_W32_SYSTEM,1,
[Defined if we run on any kind of W32 API based system])
fi
AM_CONDITIONAL(HAVE_W32_SYSTEM, test "$have_w32_system" = yes)
if test "$have_w64_system" = yes; then
AC_DEFINE(HAVE_W64_SYSTEM,1,
[Defined if we run on a 64 bit W32 API based system])
fi
AM_CONDITIONAL(HAVE_W64_SYSTEM, test "$have_w64_system" = yes)
if test "$have_w32ce_system" = yes; then
AC_DEFINE(HAVE_W32CE_SYSTEM,1,
[Defined if we run on a W32 CE API based system])
fi
AM_CONDITIONAL(HAVE_W32CE_SYSTEM, test "$have_w32ce_system" = yes)
if test "$have_android_system" = yes; then
AC_DEFINE(HAVE_ANDROID_SYSTEM,1, [Defined if we build for an Android system])
fi
AM_CONDITIONAL(HAVE_ANDROID_SYSTEM, test "$have_android_system" = yes)
AM_CONDITIONAL(BUILD_W32_GLIB, test "$build_w32_glib" = yes)
AM_CONDITIONAL(BUILD_W32_QT, test "$build_w32_qt" = yes)
AM_CONDITIONAL(HAVE_PTHREAD, test "$have_pthread" = "yes")
AC_ARG_ENABLE([fixed-path],
AC_HELP_STRING([--enable-fixed-path=PATH],
[locate binaries only via this PATH]),
[fixed_search_path="$enableval"],
[fixed_search_path=""])
if test x$fixed_search_path != x ; then
AC_DEFINE_UNQUOTED(FIXED_SEARCH_PATH, "$fixed_search_path",
[Locate binaries only via this PATH])
fi
#
# Provide information about the build.
#
BUILD_REVISION="mym4_revision"
AC_SUBST(BUILD_REVISION)
AC_DEFINE_UNQUOTED(BUILD_REVISION, "$BUILD_REVISION",
[GIT commit id revision used to build this package])
changequote(,)dnl
BUILD_FILEVERSION=`echo "$PACKAGE_VERSION"|sed 's/\([0-9.]*\).*/\1./;s/\./,/g'`
changequote([,])dnl
BUILD_FILEVERSION="${BUILD_FILEVERSION}mym4_revision_dec"
AC_SUBST(BUILD_FILEVERSION)
BUILD_TIMESTAMP=`date -u +%Y-%m-%dT%H:%M+0000 2>/dev/null || date`
AC_SUBST(BUILD_TIMESTAMP)
AC_DEFINE_UNQUOTED(BUILD_TIMESTAMP, "$BUILD_TIMESTAMP",
[The time this package was configured for a build])
#
# Options to disable some regression tests
#
run_gpgconf_test="yes"
AC_ARG_ENABLE(gpgconf-test,
AC_HELP_STRING([--disable-gpgconf-test], [disable GPGCONF regression test]),
run_gpgconf_test=$enableval)
AM_CONDITIONAL(RUN_GPGCONF_TESTS, test "$run_gpgconf_test" = "yes")
run_gpg_test="yes"
AC_ARG_ENABLE(gpg-test,
AC_HELP_STRING([--disable-gpg-test], [disable GPG regression test]),
run_gpg_test=$enableval)
AM_CONDITIONAL(RUN_GPG_TESTS, test "$run_gpg_test" = "yes")
run_gpgsm_test="yes"
AC_ARG_ENABLE(gpgsm-test,
AC_HELP_STRING([--disable-gpgsm-test], [disable GPGSM regression test]),
run_gpgsm_test=$enableval)
AM_CONDITIONAL(RUN_GPGSM_TESTS, test "$run_gpgsm_test" = "yes")
run_g13_test="yes"
AC_ARG_ENABLE(g13-test,
AC_HELP_STRING([--disable-g13-test], [disable G13 regression test]),
run_g13_test=$enableval)
AM_CONDITIONAL(RUN_G13_TESTS, test "$run_g13_test" = "yes")
# Checks for header files.
AC_CHECK_HEADERS_ONCE([locale.h sys/select.h sys/uio.h argp.h
unistd.h sys/time.h sys/types.h sys/stat.h])
# Type checks.
AC_C_INLINE
AC_CHECK_SIZEOF(unsigned int)
AC_SYS_LARGEFILE
AC_TYPE_OFF_T
AC_TYPE_UINTPTR_T
# A simple compile time check in gpgme.h for GNU/Linux systems that
# prevents a file offset bits mismatch between gpgme and the application.
NEED__FILE_OFFSET_BITS=0
if test "$have_w32_system" != yes; then
case "$ac_cv_sys_file_offset_bits" in
"" | no | unknown) ;;
*)
NEED__FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits
;;
esac
fi
AC_SUBST(NEED__FILE_OFFSET_BITS)
# Figure out platform dependent typedefs for gpgme.h
if test "$have_w32_system" = yes; then
INSERT__TYPEDEFS_FOR_GPGME_H="
#ifdef _WIN64
# include <stdint.h>
typedef int64_t gpgme_off_t;
typedef int64_t gpgme_ssize_t;
#else /* _WIN32 */
typedef long gpgme_off_t;
typedef long gpgme_ssize_t;
#endif /* _WIN32 */"
API__OFF_T="gpgme_off_t"
API__SSIZE_T="gpgme_ssize_t"
else
INSERT__TYPEDEFS_FOR_GPGME_H="
#include <sys/types.h>
typedef off_t gpgme_off_t;
typedef ssize_t gpgme_ssize_t;"
API__OFF_T="off_t"
API__SSIZE_T="ssize_t"
fi
AC_SUBST(INSERT__TYPEDEFS_FOR_GPGME_H)
AM_SUBST_NOTMAKE(INSERT__TYPEDEFS_FOR_GPGME_H)
AC_SUBST(API__OFF_T)
AM_SUBST_NOTMAKE(API__OFF_T)
AC_SUBST(API__SSIZE_T)
AM_SUBST_NOTMAKE(API__SSIZE_T)
# Checks for compiler features.
if test "$GCC" = yes; then
CFLAGS="$CFLAGS -Wall -Wcast-align -Wshadow -Wstrict-prototypes"
if test "$have_w32_system" = yes; then
CFLAGS="$CFLAGS -mms-bitfields"
fi
fi
# Only used for debugging, so no serious test needed (for actual
# functionality you have to test libc as well, this only tests the
# compiler).
AC_CACHE_CHECK([for __thread],[gpgme_cv_tls_works],
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([__thread int foo;])],
gpgme_cv_tls_works=yes,gpgme_cv_tls_works=no))
if test "$gpgme_cv_tls_works" = yes; then
AC_DEFINE(HAVE_TLS, [1], [Define if __thread is supported])
fi
# Checks for library functions.
AC_MSG_NOTICE([checking for libraries])
AC_FUNC_FSEEKO
AC_REPLACE_FUNCS(vasprintf)
if test "$ac_cv_func_vasprintf" != yes; then
GNUPG_CHECK_VA_COPY
fi
# Try to find a thread-safe version of ttyname().
gnupg_REPLACE_TTYNAME_R
if test "$ac_cv_func_ttyname_r" != yes; then
AC_MSG_WARN([
***
*** ttyname() is not thread-safe and ttyname_r() does not exist
***])
fi
# Try to find a thread-safe version of getenv().
have_thread_safe_getenv=no
jm_GLIBC21
if test $GLIBC21 = yes; then
have_thread_safe_getenv=yes
fi
if test $have_thread_safe_getenv = yes; then
AC_DEFINE(HAVE_THREAD_SAFE_GETENV, [1], [Define if getenv() is thread-safe])
fi
have_getenv_r=no
AC_CHECK_FUNCS(getenv_r, have_getenv_r=yes)
if test $have_getenv_r = no && test $have_thread_safe_getenv = no; then
AC_MSG_WARN([
***
*** getenv() is not thread-safe and getenv_r() does not exist
***])
fi
# For converting time strings to seconds since Epoch, we need the timegm
# function.
AC_CHECK_FUNCS(timegm)
if test "$ac_cv_func_timegm" != yes; then
AC_MSG_WARN([
***
*** timegm() not available - a non-thread-safe kludge will be used
*** and the TZ variable might be changed at runtime.
***])
fi
AC_CHECK_FUNCS(setlocale)
# Checking for libgpg-error.
have_gpg_error=no
AM_PATH_GPG_ERROR("$NEED_GPG_ERROR_VERSION",
have_gpg_error=yes, have_gpg_error=no)
AC_DEFINE(GPG_ERR_SOURCE_DEFAULT, GPG_ERR_SOURCE_GPGME,
[The default error source for GPGME.])
# And for libassuan.
have_libassuan=no
AM_PATH_LIBASSUAN("$NEED_LIBASSUAN_API:$NEED_LIBASSUAN_VERSION",
have_libassuan=yes, have_libassuan=no)
if test "$have_libassuan" = "yes"; then
AC_DEFINE_UNQUOTED(GPGME_LIBASSUAN_VERSION, "$libassuan_version",
[version of the libassuan library])
fi
#
# Other checks
#
# Check for funopen
AC_CHECK_FUNCS(funopen)
if test $ac_cv_func_funopen != yes; then
# No funopen but we can implement that in terms of fopencookie.
AC_CHECK_FUNCS(fopencookie)
if test $ac_cv_func_fopencookie = yes; then
AC_REPLACE_FUNCS(funopen)
else
AC_MSG_WARN([
***
*** No implementation of fopencookie or funopen available
***])
fi
fi
# Check for getgid etc
AC_CHECK_FUNCS(getgid getegid)
# Replacement functions.
AC_REPLACE_FUNCS(stpcpy)
AC_REPLACE_FUNCS(setenv)
# Assuan check for descriptor passing.
AC_CHECK_MEMBER(struct cmsghdr.cmsg_len,
[supports_descriptor_passing=yes],
[supports_descriptor_passing=no
AC_MSG_WARN([
***
*** Data structure for sending ancillary data missing.
*** Descriptor passing won't work.
***])],[
#include <stdlib.h>
#include <stddef.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <sys/un.h>
#if HAVE_SYS_UIO_H
#include <sys/uio.h>
#endif
#include <unistd.h>
])
dnl There seems to be a problem with Apple and decriptor passing.
dnl Until we found a solution we change the default to no.
dnl See bug 1483.
case "${host}" in
*-apple-darwin*)
use_descriptor_passing=no
;;
*)
use_descriptor_passing=yes
;;
esac
AC_ARG_ENABLE(fd-passing,
AC_HELP_STRING([--disable-fd-passing], [do not use FD passing]),
use_descriptor_passing=$enableval)
if test "$supports_descriptor_passing" != "yes"; then
use_descriptor_passing=no
fi
if test "$use_descriptor_passing" = "yes"; then
AC_DEFINE(USE_DESCRIPTOR_PASSING,1,
[Defined if descriptor passing is enabled and supported])
fi
AM_CONDITIONAL(USE_DESCRIPTOR_PASSING, test "$use_descriptor_passing" = "yes")
uiserver=no
if test "$use_descriptor_passing" = "yes" && test "$have_libassuan" = "yes"; then
uiserver=yes
fi
if test "$uiserver" != "no"; then
AC_DEFINE(ENABLE_UISERVER, 1,
[Defined if we are building with uiserver support.])
fi
AM_CONDITIONAL(HAVE_UISERVER, test "$uiserver" != "no")
# Add a few constants to help porting to W32
AH_VERBATIM([SEPCONSTANTS],
[
/* Separators as used in $PATH and file name. */
#ifdef HAVE_DOSISH_SYSTEM
#define PATHSEP_C ';'
#define DIRSEP_C '\\'
#define DIRSEP_S "\\"
#else
#define PATHSEP_C ':'
#define DIRSEP_C '/'
#define DIRSEP_S "/"
#endif
])
AH_BOTTOM([
/* Definition of GCC specific attributes. */
#if __GNUC__ > 2
# define GPGME_GCC_A_PURE __attribute__ ((__pure__))
#else
# define GPGME_GCC_A_PURE
#endif
/* Under WindowsCE we need gpg-error's strerror macro. */
#define GPG_ERR_ENABLE_ERRNO_MACROS 1
#define CRIGHTBLURB "Copyright (C) 2000 Werner Koch\n" \
"Copyright (C) 2001--2013 g10 Code GmbH\n"
])
# Substitution used for gpgme-config
GPGME_CONFIG_LIBS="-lgpgme"
GPGME_CONFIG_CFLAGS=""
GPGME_CONFIG_HOST="$host"
AC_SUBST(GPGME_CONFIG_API_VERSION)
AC_SUBST(GPGME_CONFIG_LIBS)
AC_SUBST(GPGME_CONFIG_CFLAGS)
AC_SUBST(GPGME_CONFIG_HOST)
# Frob'da Variables
LTLIBOBJS=`echo "$LIB@&t@OBJS" |
sed 's,\.[[^.]]* ,.lo ,g;s,\.[[^.]]*$,.lo,'`
AC_SUBST(LTLIBOBJS)
# Some checks for gpgme-tool
# Done at top: AC_CHECK_HEADER([argp.h])
AC_CHECK_TYPES([error_t], [],
[AC_DEFINE([error_t], [int],
[Define to a type to use for `error_t' if it is not otherwise available.])],
[#include <errno.h>])
# A substitution to set generated files in a Emacs buffer to read-only.
AC_SUBST(emacs_local_vars_begin, [['Local][ ][Variables:']])
AC_SUBST(emacs_local_vars_read_only, ['buffer-read-only: t'])
AC_SUBST(emacs_local_vars_end, ['End:'])
# Last check.
die=no
if test "$have_gpg_error" = "no"; then
die=yes
AC_MSG_NOTICE([[
***
*** You need libgpg-error to build this program.
** This library is for example available at
*** ftp://ftp.gnupg.org/gcrypt/libgpg-error
*** (at least version $NEED_GPG_ERROR_VERSION is required.)
***]])
fi
if test "$have_libassuan" = "no"; then
die=yes
AC_MSG_NOTICE([[
***
*** You need libassuan to build this program.
*** This library is for example available at
*** ftp://ftp.gnupg.org/gcrypt/libassuan/
*** (at least version $NEED_LIBASSUAN_VERSION (API $NEED_LIBASSUAN_API) is required).
***]])
fi
if test "$die" = "yes"; then
AC_MSG_ERROR([[
***
*** Required libraries not found. Please consult the above messages
*** and install them before running configure again.
***]])
fi
#
# Create config files
AC_CONFIG_FILES(Makefile src/Makefile
tests/Makefile
tests/gpg/Makefile
tests/gpgsm/Makefile
tests/opassuan/Makefile
doc/Makefile
src/versioninfo.rc
src/gpgme.h)
AC_CONFIG_FILES(src/gpgme-config, chmod +x src/gpgme-config)
AC_CONFIG_FILES([lang/Makefile lang/cl/Makefile lang/cl/gpgme.asd])
AC_OUTPUT
echo "
GPGME v${VERSION} has been configured as follows:
Revision: mym4_revision (mym4_revision_dec)
Platform: $host
UI Server: $uiserver
FD Passing: $use_descriptor_passing
GPGME Pthread: $have_pthread
"

File Metadata

Mime Type
text/x-diff
Expires
Sat, Feb 1, 9:11 AM (1 d, 4 h)
Storage Engine
local-disk
Storage Format
Raw Data
Storage Handle
73/b1/0d57c867a9aebd21f85d58267b66

Event Timeline