Page MenuHome GnuPG
Files F34123409

No OneTemporary
Actions

View Options

diff --git a/scd/ccid-driver.c b/scd/ccid-driver.c
index ad1e16a12..7319ada41 100644
--- a/scd/ccid-driver.c
+++ b/scd/ccid-driver.c
@@ -1,4110 +1,4124 @@
/* ccid-driver.c - USB ChipCardInterfaceDevices driver
* Copyright (C) 2003, 2004, 2005, 2006, 2007
* 2008, 2009, 2013 Free Software Foundation, Inc.
* Written by Werner Koch.
*
* This file is part of GnuPG.
*
* GnuPG is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* GnuPG is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <https://www.gnu.org/licenses/>.
*
* ALTERNATIVELY, this file may be distributed under the terms of the
* following license, in which case the provisions of this license are
* required INSTEAD OF the GNU General Public License. If you wish to
* allow use of your version of this file only under the terms of the
* GNU General Public License, and not to allow others to use your
* version of this file under the terms of the following license,
* indicate your decision by deleting this paragraph and the license
* below.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, and the entire permission notice in its entirety,
* including the disclaimer of warranties.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* CCID (ChipCardInterfaceDevices) is a specification for accessing
smartcard via a reader connected to the USB.
This is a limited driver allowing to use some CCID drivers directly
without any other specila drivers. This is a fallback driver to be
used when nothing else works or the system should be kept minimal
for security reasons. It makes use of the libusb library to gain
portable access to USB.
This driver has been tested with the SCM SCR335 and SPR532
smartcard readers and requires that a reader implements APDU or
TPDU level exchange and does fully automatic initialization.
*/
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
#if defined(HAVE_LIBUSB) || defined(TEST)
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <time.h>
#include <unistd.h>
#ifdef HAVE_NPTH
# include <npth.h>
#endif /*HAVE_NPTH*/
#include <libusb.h>
#include "scdaemon.h"
#include "iso7816.h"
#define CCID_DRIVER_INCLUDE_USB_IDS 1
#include "ccid-driver.h"
#define DRVNAME "ccid-driver: "
/* Max length of buffer with out CCID message header of 10-byte
Sending: 547 for RSA-4096 key import
APDU size = 540 (24+4+256+256)
command + lc + le = 4 + 3 + 0
Sending: write data object of cardholder certificate
APDU size = 2048
command + lc + le = 4 + 3 + 0
Receiving: 2048 for cardholder certificate
*/
#define CCID_MAX_BUF (2048+7+10)
/* CCID command timeout. */
#define CCID_CMD_TIMEOUT (5*1000)
/* Number of supported devices. See MAX_READER in apdu.c. */
#define CCID_MAX_DEVICE 16
/* Depending on how this source is used we either define our error
* output to go to stderr or to the GnuPG based logging functions. We
* use the latter when GNUPG_MAJOR_VERSION is defined. */
#if defined(GNUPG_MAJOR_VERSION)
# include "scdaemon.h"
# define DEBUGOUT(t) do { if (debug_level) \
log_debug (DRVNAME t); } while (0)
# define DEBUGOUT_1(t,a) do { if (debug_level) \
log_debug (DRVNAME t,(a)); } while (0)
# define DEBUGOUT_2(t,a,b) do { if (debug_level) \
log_debug (DRVNAME t,(a),(b)); } while (0)
# define DEBUGOUT_3(t,a,b,c) do { if (debug_level) \
log_debug (DRVNAME t,(a),(b),(c));} while (0)
# define DEBUGOUT_4(t,a,b,c,d) do { if (debug_level) \
log_debug (DRVNAME t,(a),(b),(c),(d));} while (0)
# define DEBUGOUT_CONT(t) do { if (debug_level) \
log_printf (t); } while (0)
# define DEBUGOUT_CONT_1(t,a) do { if (debug_level) \
log_printf (t,(a)); } while (0)
# define DEBUGOUT_CONT_2(t,a,b) do { if (debug_level) \
log_printf (t,(a),(b)); } while (0)
# define DEBUGOUT_CONT_3(t,a,b,c) do { if (debug_level) \
log_printf (t,(a),(b),(c)); } while (0)
# define DEBUGOUT_LF() do { if (debug_level) \
log_printf ("\n"); } while (0)
#else /* Other usage of this source - don't use gnupg specifics. */
# define DEBUGOUT(t) do { if (debug_level) \
fprintf (stderr, DRVNAME t); } while (0)
# define DEBUGOUT_1(t,a) do { if (debug_level) \
fprintf (stderr, DRVNAME t, (a)); } while (0)
# define DEBUGOUT_2(t,a,b) do { if (debug_level) \
fprintf (stderr, DRVNAME t, (a), (b)); } while (0)
# define DEBUGOUT_3(t,a,b,c) do { if (debug_level) \
fprintf (stderr, DRVNAME t, (a), (b), (c)); } while (0)
# define DEBUGOUT_4(t,a,b,c,d) do { if (debug_level) \
fprintf (stderr, DRVNAME t, (a), (b), (c), (d));} while(0)
# define DEBUGOUT_CONT(t) do { if (debug_level) \
fprintf (stderr, t); } while (0)
# define DEBUGOUT_CONT_1(t,a) do { if (debug_level) \
fprintf (stderr, t, (a)); } while (0)
# define DEBUGOUT_CONT_2(t,a,b) do { if (debug_level) \
fprintf (stderr, t, (a), (b)); } while (0)
# define DEBUGOUT_CONT_3(t,a,b,c) do { if (debug_level) \
fprintf (stderr, t, (a), (b), (c)); } while (0)
# define DEBUGOUT_LF() do { if (debug_level) \
putc ('\n', stderr); } while (0)
#endif /* This source is not used by scdaemon. */
#undef USE_LIBUSB_DEBUG_CB
#if LIBUSB_API_VERSION >= 0x01000107
# define USE_LIBUSB_DEBUG_CB 1
#endif
#ifndef EAGAIN
#define EAGAIN EWOULDBLOCK
#endif
enum {
RDR_to_PC_NotifySlotChange= 0x50,
RDR_to_PC_HardwareError = 0x51,
PC_to_RDR_SetParameters = 0x61,
PC_to_RDR_IccPowerOn = 0x62,
PC_to_RDR_IccPowerOff = 0x63,
PC_to_RDR_GetSlotStatus = 0x65,
PC_to_RDR_Secure = 0x69,
PC_to_RDR_T0APDU = 0x6a,
PC_to_RDR_Escape = 0x6b,
PC_to_RDR_GetParameters = 0x6c,
PC_to_RDR_ResetParameters = 0x6d,
PC_to_RDR_IccClock = 0x6e,
PC_to_RDR_XfrBlock = 0x6f,
PC_to_RDR_Mechanical = 0x71,
PC_to_RDR_Abort = 0x72,
PC_to_RDR_SetDataRate = 0x73,
RDR_to_PC_DataBlock = 0x80,
RDR_to_PC_SlotStatus = 0x81,
RDR_to_PC_Parameters = 0x82,
RDR_to_PC_Escape = 0x83,
RDR_to_PC_DataRate = 0x84
};
/* Two macro to detect whether a CCID command has failed and to get
the error code. These macros assume that we can access the
mandatory first 10 bytes of a CCID message in BUF. */
#define CCID_COMMAND_FAILED(buf) ((buf)[7] & 0x40)
#define CCID_ERROR_CODE(buf) (((unsigned char *)(buf))[8])
/* Store information on the driver's state. A pointer to such a
structure is used as handle for most functions. */
struct ccid_driver_s
{
libusb_device_handle *idev;
unsigned int bai;
unsigned short id_vendor;
unsigned short id_product;
int ifc_no;
int ep_bulk_out;
int ep_bulk_in;
int ep_intr;
int seqno;
unsigned char t1_ns;
unsigned char t1_nr;
unsigned char nonnull_nad;
int max_ifsd;
int max_ccid_msglen;
int ifsc;
unsigned char apdu_level:2; /* Reader supports short APDU level
exchange. With a value of 2 short
and extended level is supported.*/
unsigned int auto_voltage:1;
unsigned int auto_param:1;
unsigned int auto_pps:1;
unsigned int auto_ifsd:1;
unsigned int has_pinpad:2;
unsigned int enodev_seen:1;
int powered_off;
time_t last_progress; /* Last time we sent progress line. */
/* The progress callback and its first arg as supplied to
ccid_set_progress_cb. */
void (*progress_cb)(void *, const char *, int, int, int);
void *progress_cb_arg;
void (*prompt_cb)(void *, int);
void *prompt_cb_arg;
unsigned char intr_buf[64];
struct libusb_transfer *transfer;
};
/* Object to keep infos about found ccid devices. */
struct ccid_dev_table {
int n; /* Index to ccid_usb_dev_list */
int interface_number;
int setting_number;
unsigned char *ifcdesc_extra;
int ep_bulk_out;
int ep_bulk_in;
int ep_intr;
size_t ifcdesc_extra_len;
};
static int initialized_usb; /* Tracks whether USB has been initialized. */
static int debug_level; /* Flag to control the debug output.
0 = No debugging
1 = USB I/O info
2 = Level 1 + T=1 protocol tracing
3 = Level 2 + USB/I/O tracing of SlotStatus.
*/
static int ccid_usb_thread_is_alive;
static libusb_device **ccid_usb_dev_list;
static struct ccid_dev_table ccid_dev_table[CCID_MAX_DEVICE];
static unsigned int compute_edc (const unsigned char *data, size_t datalen,
int use_crc);
static int bulk_out (ccid_driver_t handle, unsigned char *msg, size_t msglen,
int no_debug);
static int bulk_in (ccid_driver_t handle, unsigned char *buffer, size_t length,
size_t *nread, int expected_type, int seqno, int timeout,
int no_debug);
static int abort_cmd (ccid_driver_t handle, int seqno, int init);
static int send_escape_cmd (ccid_driver_t handle, const unsigned char *data,
size_t datalen, unsigned char *result,
size_t resultmax, size_t *resultlen);
static int
map_libusb_error (int usberr)
{
switch (usberr)
{
case 0: return 0;
case LIBUSB_ERROR_IO: return CCID_DRIVER_ERR_USB_IO;
case LIBUSB_ERROR_ACCESS: return CCID_DRIVER_ERR_USB_ACCESS;
case LIBUSB_ERROR_NO_DEVICE:return CCID_DRIVER_ERR_USB_NO_DEVICE;
case LIBUSB_ERROR_BUSY: return CCID_DRIVER_ERR_USB_BUSY;
case LIBUSB_ERROR_TIMEOUT: return CCID_DRIVER_ERR_USB_TIMEOUT;
case LIBUSB_ERROR_OVERFLOW: return CCID_DRIVER_ERR_USB_OVERFLOW;
}
return CCID_DRIVER_ERR_USB_OTHER;
}
/* Convert a little endian stored 4 byte value into an unsigned
integer. */
static unsigned int
convert_le_u32 (const unsigned char *buf)
{
return buf[0] | (buf[1] << 8) | (buf[2] << 16) | ((unsigned int)buf[3] << 24);
}
/* Convert a little endian stored 2 byte value into an unsigned
integer. */
static unsigned int
convert_le_u16 (const unsigned char *buf)
{
return buf[0] | (buf[1] << 8);
}
static void
set_msg_len (unsigned char *msg, unsigned int length)
{
msg[1] = length;
msg[2] = length >> 8;
msg[3] = length >> 16;
msg[4] = length >> 24;
}
static void
print_progress (ccid_driver_t handle)
{
time_t ct = time (NULL);
/* We don't want to print progress lines too often. */
if (ct == handle->last_progress)
return;
if (handle->progress_cb)
handle->progress_cb (handle->progress_cb_arg, "card_busy", 'w', 0, 0);
handle->last_progress = ct;
}
/* Pint an error message for a failed CCID command including a textual
error code. MSG shall be the CCID message at a minimum of 10 bytes. */
static void
print_command_failed (const unsigned char *msg)
{
const char *t;
char buffer[100];
int ec;
if (!debug_level)
return;
ec = CCID_ERROR_CODE (msg);
switch (ec)
{
case 0x00: t = "Command not supported"; break;
case 0xE0: t = "Slot busy"; break;
case 0xEF: t = "PIN cancelled"; break;
case 0xF0: t = "PIN timeout"; break;
case 0xF2: t = "Automatic sequence ongoing"; break;
case 0xF3: t = "Deactivated Protocol"; break;
case 0xF4: t = "Procedure byte conflict"; break;
case 0xF5: t = "ICC class not supported"; break;
case 0xF6: t = "ICC protocol not supported"; break;
case 0xF7: t = "Bad checksum in ATR"; break;
case 0xF8: t = "Bad TS in ATR"; break;
case 0xFB: t = "An all inclusive hardware error occurred"; break;
case 0xFC: t = "Overrun error while talking to the ICC"; break;
case 0xFD: t = "Parity error while talking to the ICC"; break;
case 0xFE: t = "CCID timed out while talking to the ICC"; break;
case 0xFF: t = "Host aborted the current activity"; break;
default:
if (ec > 0 && ec < 128)
sprintf (buffer, "Parameter error at offset %d", ec);
else
sprintf (buffer, "Error code %02X", ec);
t = buffer;
break;
}
DEBUGOUT_1 ("CCID command failed: %s\n", t);
}
static void
print_pr_data (const unsigned char *data, size_t datalen, size_t off)
{
int any = 0;
for (; off < datalen; off++)
{
if (!any || !(off % 16))
{
if (any)
DEBUGOUT_LF ();
DEBUGOUT_1 (" [%04lu] ", (unsigned long) off);
}
DEBUGOUT_CONT_1 (" %02X", data[off]);
any = 1;
}
if (any && (off % 16))
DEBUGOUT_LF ();
}
static void
print_p2r_header (const char *name, const unsigned char *msg, size_t msglen)
{
DEBUGOUT_1 ("%s:\n", name);
if (msglen < 7)
return;
DEBUGOUT_1 (" dwLength ..........: %u\n", convert_le_u32 (msg+1));
DEBUGOUT_1 (" bSlot .............: %u\n", msg[5]);
DEBUGOUT_1 (" bSeq ..............: %u\n", msg[6]);
}
static void
print_p2r_iccpoweron (const unsigned char *msg, size_t msglen)
{
print_p2r_header ("PC_to_RDR_IccPowerOn", msg, msglen);
if (msglen < 10)
return;
DEBUGOUT_2 (" bPowerSelect ......: 0x%02x (%s)\n", msg[7],
msg[7] == 0? "auto":
msg[7] == 1? "5.0 V":
msg[7] == 2? "3.0 V":
msg[7] == 3? "1.8 V":"");
print_pr_data (msg, msglen, 8);
}
static void
print_p2r_iccpoweroff (const unsigned char *msg, size_t msglen)
{
print_p2r_header ("PC_to_RDR_IccPowerOff", msg, msglen);
print_pr_data (msg, msglen, 7);
}
static void
print_p2r_getslotstatus (const unsigned char *msg, size_t msglen)
{
print_p2r_header ("PC_to_RDR_GetSlotStatus", msg, msglen);
print_pr_data (msg, msglen, 7);
}
static void
print_p2r_xfrblock (const unsigned char *msg, size_t msglen)
{
unsigned int val;
print_p2r_header ("PC_to_RDR_XfrBlock", msg, msglen);
if (msglen < 10)
return;
DEBUGOUT_1 (" bBWI ..............: 0x%02x\n", msg[7]);
val = convert_le_u16 (msg+8);
DEBUGOUT_2 (" wLevelParameter ...: 0x%04x%s\n", val,
val == 1? " (continued)":
val == 2? " (continues+ends)":
val == 3? " (continues+continued)":
val == 16? " (DataBlock-expected)":"");
print_pr_data (msg, msglen, 10);
}
static void
print_p2r_getparameters (const unsigned char *msg, size_t msglen)
{
print_p2r_header ("PC_to_RDR_GetParameters", msg, msglen);
print_pr_data (msg, msglen, 7);
}
static void
print_p2r_resetparameters (const unsigned char *msg, size_t msglen)
{
print_p2r_header ("PC_to_RDR_ResetParameters", msg, msglen);
print_pr_data (msg, msglen, 7);
}
static void
print_p2r_setparameters (const unsigned char *msg, size_t msglen)
{
print_p2r_header ("PC_to_RDR_SetParameters", msg, msglen);
if (msglen < 10)
return;
DEBUGOUT_1 (" bProtocolNum ......: 0x%02x\n", msg[7]);
print_pr_data (msg, msglen, 8);
}
static void
print_p2r_escape (const unsigned char *msg, size_t msglen)
{
print_p2r_header ("PC_to_RDR_Escape", msg, msglen);
print_pr_data (msg, msglen, 7);
}
static void
print_p2r_iccclock (const unsigned char *msg, size_t msglen)
{
print_p2r_header ("PC_to_RDR_IccClock", msg, msglen);
if (msglen < 10)
return;
DEBUGOUT_1 (" bClockCommand .....: 0x%02x\n", msg[7]);
print_pr_data (msg, msglen, 8);
}
static void
print_p2r_to0apdu (const unsigned char *msg, size_t msglen)
{
print_p2r_header ("PC_to_RDR_T0APDU", msg, msglen);
if (msglen < 10)
return;
DEBUGOUT_1 (" bmChanges .........: 0x%02x\n", msg[7]);
DEBUGOUT_1 (" bClassGetResponse .: 0x%02x\n", msg[8]);
DEBUGOUT_1 (" bClassEnvelope ....: 0x%02x\n", msg[9]);
print_pr_data (msg, msglen, 10);
}
static void
print_p2r_secure (const unsigned char *msg, size_t msglen)
{
unsigned int val;
print_p2r_header ("PC_to_RDR_Secure", msg, msglen);
if (msglen < 10)
return;
DEBUGOUT_1 (" bBMI ..............: 0x%02x\n", msg[7]);
val = convert_le_u16 (msg+8);
DEBUGOUT_2 (" wLevelParameter ...: 0x%04x%s\n", val,
val == 1? " (continued)":
val == 2? " (continues+ends)":
val == 3? " (continues+continued)":
val == 16? " (DataBlock-expected)":"");
print_pr_data (msg, msglen, 10);
}
static void
print_p2r_mechanical (const unsigned char *msg, size_t msglen)
{
print_p2r_header ("PC_to_RDR_Mechanical", msg, msglen);
if (msglen < 10)
return;
DEBUGOUT_1 (" bFunction .........: 0x%02x\n", msg[7]);
print_pr_data (msg, msglen, 8);
}
static void
print_p2r_abort (const unsigned char *msg, size_t msglen)
{
print_p2r_header ("PC_to_RDR_Abort", msg, msglen);
print_pr_data (msg, msglen, 7);
}
static void
print_p2r_setdatarate (const unsigned char *msg, size_t msglen)
{
print_p2r_header ("PC_to_RDR_SetDataRate", msg, msglen);
if (msglen < 10)
return;
print_pr_data (msg, msglen, 7);
}
static void
print_p2r_unknown (const unsigned char *msg, size_t msglen)
{
print_p2r_header ("Unknown PC_to_RDR command", msg, msglen);
if (msglen < 10)
return;
print_pr_data (msg, msglen, 0);
}
static void
print_r2p_header (const char *name, const unsigned char *msg, size_t msglen)
{
DEBUGOUT_1 ("%s:\n", name);
if (msglen < 9)
return;
DEBUGOUT_1 (" dwLength ..........: %u\n", convert_le_u32 (msg+1));
DEBUGOUT_1 (" bSlot .............: %u\n", msg[5]);
DEBUGOUT_1 (" bSeq ..............: %u\n", msg[6]);
DEBUGOUT_1 (" bStatus ...........: %u\n", msg[7]);
if (msg[8])
DEBUGOUT_1 (" bError ............: %u\n", msg[8]);
}
static void
print_r2p_datablock (const unsigned char *msg, size_t msglen)
{
print_r2p_header ("RDR_to_PC_DataBlock", msg, msglen);
if (msglen < 10)
return;
if (msg[9])
DEBUGOUT_2 (" bChainParameter ...: 0x%02x%s\n", msg[9],
msg[9] == 1? " (continued)":
msg[9] == 2? " (continues+ends)":
msg[9] == 3? " (continues+continued)":
msg[9] == 16? " (XferBlock-expected)":"");
print_pr_data (msg, msglen, 10);
}
static void
print_r2p_slotstatus (const unsigned char *msg, size_t msglen)
{
print_r2p_header ("RDR_to_PC_SlotStatus", msg, msglen);
if (msglen < 10)
return;
DEBUGOUT_2 (" bClockStatus ......: 0x%02x%s\n", msg[9],
msg[9] == 0? " (running)":
msg[9] == 1? " (stopped-L)":
msg[9] == 2? " (stopped-H)":
msg[9] == 3? " (stopped)":"");
print_pr_data (msg, msglen, 10);
}
static void
print_r2p_parameters (const unsigned char *msg, size_t msglen)
{
print_r2p_header ("RDR_to_PC_Parameters", msg, msglen);
if (msglen < 10)
return;
DEBUGOUT_1 (" protocol ..........: T=%d\n", msg[9]);
if (msglen == 17 && msg[9] == 1)
{
/* Protocol T=1. */
DEBUGOUT_1 (" bmFindexDindex ....: %02X\n", msg[10]);
DEBUGOUT_1 (" bmTCCKST1 .........: %02X\n", msg[11]);
DEBUGOUT_1 (" bGuardTimeT1 ......: %02X\n", msg[12]);
DEBUGOUT_1 (" bmWaitingIntegersT1: %02X\n", msg[13]);
DEBUGOUT_1 (" bClockStop ........: %02X\n", msg[14]);
DEBUGOUT_1 (" bIFSC .............: %d\n", msg[15]);
DEBUGOUT_1 (" bNadValue .........: %d\n", msg[16]);
}
else
print_pr_data (msg, msglen, 10);
}
static void
print_r2p_escape (const unsigned char *msg, size_t msglen)
{
print_r2p_header ("RDR_to_PC_Escape", msg, msglen);
if (msglen < 10)
return;
DEBUGOUT_1 (" buffer[9] .........: %02X\n", msg[9]);
print_pr_data (msg, msglen, 10);
}
static void
print_r2p_datarate (const unsigned char *msg, size_t msglen)
{
print_r2p_header ("RDR_to_PC_DataRate", msg, msglen);
if (msglen < 10)
return;
if (msglen >= 18)
{
DEBUGOUT_1 (" dwClockFrequency ..: %u\n", convert_le_u32 (msg+10));
DEBUGOUT_1 (" dwDataRate ..... ..: %u\n", convert_le_u32 (msg+14));
print_pr_data (msg, msglen, 18);
}
else
print_pr_data (msg, msglen, 10);
}
static void
print_r2p_unknown (const unsigned char *msg, size_t msglen)
{
print_r2p_header ("Unknown RDR_to_PC command", msg, msglen);
if (msglen < 10)
return;
DEBUGOUT_1 (" bMessageType ......: %02X\n", msg[0]);
DEBUGOUT_1 (" buffer[9] .........: %02X\n", msg[9]);
print_pr_data (msg, msglen, 10);
}
/* Parse a CCID descriptor, optionally print all available features
and test whether this reader is usable by this driver. Returns 0
if it is usable.
Note, that this code is based on the one in lsusb.c of the
usb-utils package, I wrote on 2003-09-01. -wk. */
static int
parse_ccid_descriptor (ccid_driver_t handle, unsigned short bcd_device,
const unsigned char *buf, size_t buflen)
{
unsigned int i;
unsigned int us;
int have_t1 = 0, have_tpdu=0;
handle->nonnull_nad = 0;
handle->auto_ifsd = 0;
handle->max_ifsd = 32;
handle->has_pinpad = 0;
handle->apdu_level = 0;
handle->auto_voltage = 0;
handle->auto_param = 0;
handle->auto_pps = 0;
DEBUGOUT_3 ("idVendor: %04X idProduct: %04X bcdDevice: %04X\n",
handle->id_vendor, handle->id_product, bcd_device);
if (buflen < 54 || buf[0] < 54)
{
DEBUGOUT ("CCID device descriptor is too short\n");
return -1;
}
DEBUGOUT ("ChipCard Interface Descriptor:\n");
DEBUGOUT_1 (" bLength %5u\n", buf[0]);
DEBUGOUT_1 (" bDescriptorType %5u\n", buf[1]);
DEBUGOUT_2 (" bcdCCID %2x.%02x", buf[3], buf[2]);
if (buf[3] != 1 || buf[2] != 0)
DEBUGOUT_CONT(" (Warning: Only accurate for version 1.0)");
DEBUGOUT_LF ();
DEBUGOUT_1 (" nMaxSlotIndex %5u\n", buf[4]);
DEBUGOUT_2 (" bVoltageSupport %5u %s\n",
buf[5], (buf[5] == 1? "5.0V" : buf[5] == 2? "3.0V"
: buf[5] == 3? "1.8V":"?"));
us = convert_le_u32 (buf+6);
DEBUGOUT_1 (" dwProtocols %5u ", us);
if ((us & 1))
DEBUGOUT_CONT (" T=0");
if ((us & 2))
{
DEBUGOUT_CONT (" T=1");
have_t1 = 1;
}
if ((us & ~3))
DEBUGOUT_CONT (" (Invalid values detected)");
DEBUGOUT_LF ();
us = convert_le_u32(buf+10);
DEBUGOUT_1 (" dwDefaultClock %5u\n", us);
us = convert_le_u32(buf+14);
DEBUGOUT_1 (" dwMaxiumumClock %5u\n", us);
DEBUGOUT_1 (" bNumClockSupported %5u\n", buf[18]);
us = convert_le_u32(buf+19);
DEBUGOUT_1 (" dwDataRate %7u bps\n", us);
us = convert_le_u32(buf+23);
DEBUGOUT_1 (" dwMaxDataRate %7u bps\n", us);
DEBUGOUT_1 (" bNumDataRatesSupp. %5u\n", buf[27]);
us = convert_le_u32(buf+28);
DEBUGOUT_1 (" dwMaxIFSD %5u\n", us);
handle->max_ifsd = us;
us = convert_le_u32(buf+32);
DEBUGOUT_1 (" dwSyncProtocols %08X ", us);
if ((us&1))
DEBUGOUT_CONT ( " 2-wire");
if ((us&2))
DEBUGOUT_CONT ( " 3-wire");
if ((us&4))
DEBUGOUT_CONT ( " I2C");
DEBUGOUT_LF ();
us = convert_le_u32(buf+36);
DEBUGOUT_1 (" dwMechanical %08X ", us);
if ((us & 1))
DEBUGOUT_CONT (" accept");
if ((us & 2))
DEBUGOUT_CONT (" eject");
if ((us & 4))
DEBUGOUT_CONT (" capture");
if ((us & 8))
DEBUGOUT_CONT (" lock");
DEBUGOUT_LF ();
us = convert_le_u32(buf+40);
DEBUGOUT_1 (" dwFeatures %08X\n", us);
if ((us & 0x0002))
{
DEBUGOUT (" Auto configuration based on ATR (assumes auto voltage)\n");
handle->auto_voltage = 1;
}
if ((us & 0x0004))
DEBUGOUT (" Auto activation on insert\n");
if ((us & 0x0008))
{
DEBUGOUT (" Auto voltage selection\n");
handle->auto_voltage = 1;
}
if ((us & 0x0010))
DEBUGOUT (" Auto clock change\n");
if ((us & 0x0020))
DEBUGOUT (" Auto baud rate change\n");
if ((us & 0x0040))
{
DEBUGOUT (" Auto parameter negotiation made by CCID\n");
handle->auto_param = 1;
}
else if ((us & 0x0080))
{
DEBUGOUT (" Auto PPS made by CCID\n");
handle->auto_pps = 1;
}
if ((us & (0x0040 | 0x0080)) == (0x0040 | 0x0080))
DEBUGOUT (" WARNING: conflicting negotiation features\n");
if ((us & 0x0100))
DEBUGOUT (" CCID can set ICC in clock stop mode\n");
if ((us & 0x0200))
{
DEBUGOUT (" NAD value other than 0x00 accepted\n");
handle->nonnull_nad = 1;
}
if ((us & 0x0400))
{
DEBUGOUT (" Auto IFSD exchange\n");
handle->auto_ifsd = 1;
}
if ((us & 0x00010000))
{
DEBUGOUT (" TPDU level exchange\n");
have_tpdu = 1;
}
else if ((us & 0x00020000))
{
DEBUGOUT (" Short APDU level exchange\n");
handle->apdu_level = 1;
}
else if ((us & 0x00040000))
{
DEBUGOUT (" Short and extended APDU level exchange\n");
handle->apdu_level = 2;
}
else if ((us & 0x00070000))
DEBUGOUT (" WARNING: conflicting exchange levels\n");
us = convert_le_u32(buf+44);
DEBUGOUT_1 (" dwMaxCCIDMsgLen %5u\n", us);
handle->max_ccid_msglen = us;
DEBUGOUT ( " bClassGetResponse ");
if (buf[48] == 0xff)
DEBUGOUT_CONT ("echo\n");
else
DEBUGOUT_CONT_1 (" %02X\n", buf[48]);
DEBUGOUT ( " bClassEnvelope ");
if (buf[49] == 0xff)
DEBUGOUT_CONT ("echo\n");
else
DEBUGOUT_CONT_1 (" %02X\n", buf[48]);
DEBUGOUT ( " wlcdLayout ");
if (!buf[50] && !buf[51])
DEBUGOUT_CONT ("none\n");
else
DEBUGOUT_CONT_2 ("%u cols %u lines\n", buf[50], buf[51]);
DEBUGOUT_1 (" bPINSupport %5u ", buf[52]);
if ((buf[52] & 1))
{
DEBUGOUT_CONT ( " verification");
handle->has_pinpad |= 1;
}
if ((buf[52] & 2))
{
DEBUGOUT_CONT ( " modification");
handle->has_pinpad |= 2;
}
DEBUGOUT_LF ();
DEBUGOUT_1 (" bMaxCCIDBusySlots %5u\n", buf[53]);
if (buf[0] > 54)
{
DEBUGOUT (" junk ");
for (i=54; i < buf[0]-54; i++)
DEBUGOUT_CONT_1 (" %02X", buf[i]);
DEBUGOUT_LF ();
}
if (!have_t1 || !(have_tpdu || handle->apdu_level))
{
DEBUGOUT ("this drivers requires that the reader supports T=1, "
"TPDU or APDU level exchange - this is not available\n");
return -1;
}
/* SCM drivers get stuck in their internal USB stack if they try to
send a frame of n*wMaxPacketSize back to us. Given that
wMaxPacketSize is 64 for these readers we set the IFSD to a value
lower than that:
64 - 10 CCID header - 4 T1frame - 2 reserved = 48
Product Ids:
0xe001 - SCR 331
0x5111 - SCR 331-DI
0x5115 - SCR 335
0xe003 - SPR 532
The
0x5117 - SCR 3320 USB ID-000 reader
seems to be very slow but enabling this workaround boosts the
performance to a more or less acceptable level (tested by David).
*/
if (handle->id_vendor == VENDOR_SCM
&& handle->max_ifsd > 48
&& ( (handle->id_product == SCM_SCR331 && bcd_device < 0x0516)
||(handle->id_product == SCM_SCR331DI && bcd_device < 0x0620)
||(handle->id_product == SCM_SCR335 && bcd_device < 0x0514)
||(handle->id_product == SCM_SPR532 && bcd_device < 0x0504)
||(handle->id_product == SCM_SCR3320 && bcd_device < 0x0522)
))
{
DEBUGOUT ("enabling workaround for buggy SCM readers\n");
handle->max_ifsd = 48;
}
if (handle->id_vendor == VENDOR_GEMPC)
{
DEBUGOUT ("enabling product quirk: disable non-null NAD\n");
handle->nonnull_nad = 0;
}
return 0;
}
static char *
get_escaped_usb_string (libusb_device_handle *idev, int idx,
const char *prefix, const char *suffix)
{
int rc;
unsigned char buf[280];
unsigned char *s;
unsigned int langid;
size_t i, n, len;
char *result;
if (!idx)
return NULL;
/* Fixme: The next line is for the current Valgrid without support
for USB IOCTLs. */
memset (buf, 0, sizeof buf);
/* First get the list of supported languages and use the first one.
If we do don't find it we try to use English. Note that this is
all in a 2 bute Unicode encoding using little endian. */
#ifdef USE_NPTH
npth_unprotect ();
#endif
rc = libusb_control_transfer (idev, LIBUSB_ENDPOINT_IN,
LIBUSB_REQUEST_GET_DESCRIPTOR,
(LIBUSB_DT_STRING << 8), 0,
buf, sizeof buf, 1000 /* ms timeout */);
#ifdef USE_NPTH
npth_protect ();
#endif
if (rc < 4)
langid = 0x0409; /* English. */
else
langid = (buf[3] << 8) | buf[2];
#ifdef USE_NPTH
npth_unprotect ();
#endif
rc = libusb_control_transfer (idev, LIBUSB_ENDPOINT_IN,
LIBUSB_REQUEST_GET_DESCRIPTOR,
(LIBUSB_DT_STRING << 8) + idx, langid,
buf, sizeof buf, 1000 /* ms timeout */);
#ifdef USE_NPTH
npth_protect ();
#endif
if (rc < 2 || buf[1] != LIBUSB_DT_STRING)
return NULL; /* Error or not a string. */
len = buf[0];
if (len > rc)
return NULL; /* Larger than our buffer. */
for (s=buf+2, i=2, n=0; i+1 < len; i += 2, s += 2)
{
if (s[1])
n++; /* High byte set. */
else if (*s <= 0x20 || *s >= 0x7f || *s == '%' || *s == ':')
n += 3 ;
else
n++;
}
result = malloc (strlen (prefix) + n + strlen (suffix) + 1);
if (!result)
return NULL;
strcpy (result, prefix);
n = strlen (prefix);
for (s=buf+2, i=2; i+1 < len; i += 2, s += 2)
{
if (s[1])
result[n++] = '\xff'; /* High byte set. */
else if (*s <= 0x20 || *s >= 0x7f || *s == '%' || *s == ':')
{
sprintf (result+n, "%%%02X", *s);
n += 3;
}
else
result[n++] = *s;
}
strcpy (result+n, suffix);
return result;
}
/* This function creates an reader id to be used to find the same
physical reader after a reset. It returns an allocated and possibly
percent escaped string or NULL if not enough memory is available. */
static char *
make_reader_id (libusb_device_handle *idev,
unsigned int vendor, unsigned int product,
unsigned char serialno_index)
{
char *rid;
char prefix[20];
sprintf (prefix, "%04X:%04X:", (vendor & 0xffff), (product & 0xffff));
rid = get_escaped_usb_string (idev, serialno_index, prefix, ":0");
if (!rid)
{
rid = malloc (strlen (prefix) + 3 + 1);
if (!rid)
return NULL;
strcpy (rid, prefix);
strcat (rid, "X:0");
}
return rid;
}
/* Helper to find the endpoint from an interface descriptor. */
static int
find_endpoint (const struct libusb_interface_descriptor *ifcdesc, int mode)
{
int no;
int want_bulk_in = 0;
if (mode == 1)
want_bulk_in = 0x80;
for (no=0; no < ifcdesc->bNumEndpoints; no++)
{
const struct libusb_endpoint_descriptor *ep = ifcdesc->endpoint + no;
if (ep->bDescriptorType != LIBUSB_DT_ENDPOINT)
;
else if (mode == 2
&& ((ep->bmAttributes & LIBUSB_TRANSFER_TYPE_MASK)
== LIBUSB_TRANSFER_TYPE_INTERRUPT)
&& (ep->bEndpointAddress & 0x80))
return ep->bEndpointAddress;
else if ((mode == 0 || mode == 1)
&& ((ep->bmAttributes & LIBUSB_TRANSFER_TYPE_MASK)
== LIBUSB_TRANSFER_TYPE_BULK)
&& (ep->bEndpointAddress & 0x80) == want_bulk_in)
return ep->bEndpointAddress;
}
return -1;
}
/* Helper for scan_devices. This function returns true if a
requested device has been found or the caller should stop scanning
for other reasons. */
static void
scan_usb_device (int *count, char **rid_list, struct libusb_device *dev)
{
int ifc_no;
int set_no;
const struct libusb_interface_descriptor *ifcdesc;
char *rid;
libusb_device_handle *idev = NULL;
int err;
struct libusb_config_descriptor *config;
struct libusb_device_descriptor desc;
char *p;
err = libusb_get_device_descriptor (dev, &desc);
if (err)
return;
err = libusb_get_active_config_descriptor (dev, &config);
if (err)
return;
for (ifc_no=0; ifc_no < config->bNumInterfaces; ifc_no++)
for (set_no=0; set_no < config->interface[ifc_no].num_altsetting; set_no++)
{
ifcdesc = (config->interface[ifc_no].altsetting + set_no);
/* The second condition is for older SCM SPR 532 who did
not know about the assigned CCID class. The third
condition does the same for a Cherry SmartTerminal
ST-2000. Instead of trying to interpret the strings
we simply check the product ID. */
if (ifcdesc && ifcdesc->extra
&& ((ifcdesc->bInterfaceClass == 11
&& ifcdesc->bInterfaceSubClass == 0
&& ifcdesc->bInterfaceProtocol == 0)
|| (ifcdesc->bInterfaceClass == 255
&& desc.idVendor == VENDOR_SCM
&& desc.idProduct == SCM_SPR532)
|| (ifcdesc->bInterfaceClass == 255
&& desc.idVendor == VENDOR_CHERRY
&& desc.idProduct == CHERRY_ST2000)))
{
++*count;
err = libusb_open (dev, &idev);
if (err)
{
DEBUGOUT_1 ("usb_open failed: %s\n", libusb_error_name (err));
continue; /* with next setting. */
}
rid = make_reader_id (idev, desc.idVendor, desc.idProduct,
desc.iSerialNumber);
if (!rid)
{
libusb_free_config_descriptor (config);
return;
}
/* We are collecting infos about all available CCID
readers. Store them and continue. */
DEBUGOUT_2 ("found CCID reader %d (ID=%s)\n", *count, rid);
p = malloc ((*rid_list? strlen (*rid_list):0) + 1
+ strlen (rid) + 1);
if (p)
{
*p = 0;
if (*rid_list)
{
strcat (p, *rid_list);
free (*rid_list);
}
strcat (p, rid);
strcat (p, "\n");
*rid_list = p;
}
else /* Out of memory. */
{
libusb_free_config_descriptor (config);
free (rid);
return;
}
free (rid);
libusb_close (idev);
idev = NULL;
}
}
libusb_free_config_descriptor (config);
}
/* Scan all CCID devices.
The function returns 0 if a reader has been found or when a scan
returned without error.
R_RID should be the address where to store the list of reader_ids
we found. If on return this list is empty, no CCID device has been
found; otherwise it points to an allocated linked list of reader
IDs.
*/
static int
scan_devices (char **r_rid)
{
char *rid_list = NULL;
int count = 0;
libusb_device **dev_list = NULL;
libusb_device *dev;
int i;
ssize_t n;
/* Set return values to a default. */
if (r_rid)
*r_rid = NULL;
n = libusb_get_device_list (NULL, &dev_list);
for (i = 0; i < n; i++)
{
dev = dev_list[i];
scan_usb_device (&count, &rid_list, dev);
}
libusb_free_device_list (dev_list, 1);
*r_rid = rid_list;
return 0;
}
#ifdef USE_LIBUSB_DEBUG_CB
static void
debug_libusb_cb (libusb_context *ctx, enum libusb_log_level level,
const char *str)
{
int n = str? strlen (str):0;
(void)ctx;
/* Strip the LF so that our logging filter does not escape it. */
if (n && str[n-1] == '\n')
n--;
log_debug ("libusb{%d}: %.*s\n", level, n, str);
}
#endif /* USE_LIBUSB_DEBUG_CB */
/* Set the level of debugging to LEVEL and return the old level. -1
just returns the old level. A level of 0 disables debugging, 1
enables debugging, 2 enables additional tracing of the T=1
protocol, 3 additionally enables debugging for GetSlotStatus, other
values are not yet defined.
Note that libusb may provide its own debugging feature which is
enabled by setting the envvar USB_DEBUG. */
int
ccid_set_debug_level (int level)
{
int old = debug_level;
if (level != -1)
debug_level = level;
#ifdef USE_LIBUSB_DEBUG_CB
if (level > 4)
{
log_debug ("libusb: Enable logging\n");
libusb_set_log_cb (NULL, debug_libusb_cb, LIBUSB_LOG_CB_GLOBAL);
libusb_set_option (NULL, LIBUSB_OPTION_LOG_LEVEL, LIBUSB_LOG_LEVEL_DEBUG);
}
else
libusb_set_log_cb (NULL, NULL, LIBUSB_LOG_CB_GLOBAL);
#endif /* USE_LIBUSB_DEBUG_CB */
return old;
}
char *
ccid_get_reader_list (void)
{
char *reader_list;
if (!initialized_usb)
{
int rc;
if ((rc = libusb_init (NULL)))
{
DEBUGOUT_1 ("usb_init failed: %s.\n", libusb_error_name (rc));
return NULL;
}
initialized_usb = 1;
}
if (scan_devices (&reader_list))
return NULL; /* Error. */
return reader_list;
}
/* Vendor specific custom initialization. */
static int
ccid_vendor_specific_init (ccid_driver_t handle)
{
int r = 0;
if (handle->id_vendor == VENDOR_VEGA && handle->id_product == VEGA_ALPHA)
{
/*
* Vega alpha has a feature to show retry counter on the pinpad
* display. But it assumes that the card returns the value of
* retry counter by VERIFY with empty data (return code of
* 63Cx). Unfortunately, existing OpenPGP cards don't support
* VERIFY command with empty data. This vendor specific command
* sequence is to disable the feature.
*/
const unsigned char cmd[] = { '\xb5', '\x01', '\x00', '\x03', '\x00' };
r = send_escape_cmd (handle, cmd, sizeof (cmd), NULL, 0, NULL);
}
else if (handle->id_vendor == VENDOR_SCM && handle->id_product == SCM_SPR532)
{
/*
* It seems that SEQ may be out of sync between host and the card reader,
* and SET_INTERFACE doesn't reset it. Make sure it works at the init.
*/
abort_cmd (handle, 0, 1);
}
if (r != 0 && r != CCID_DRIVER_ERR_CARD_INACTIVE
&& r != CCID_DRIVER_ERR_NO_CARD)
return r;
else
return 0;
}
static int
ccid_vendor_specific_setup (ccid_driver_t handle)
{
if (handle->id_vendor == VENDOR_SCM && handle->id_product == SCM_SPR532)
{
#ifdef USE_NPTH
npth_unprotect ();
#endif
libusb_clear_halt (handle->idev, handle->ep_intr);
#ifdef USE_NPTH
npth_protect ();
#endif
}
return 0;
}
static int
ccid_vendor_specific_pinpad_setup (ccid_driver_t handle)
{
if (handle->id_vendor == VENDOR_SCM && handle->id_product == SCM_SPR532)
{
DEBUGOUT ("sending escape sequence to switch to a case 1 APDU\n");
send_escape_cmd (handle, (const unsigned char*)"\x80\x02\x00", 3,
NULL, 0, NULL);
}
return 0;
}
gpg_error_t
ccid_dev_scan (int *idx_max_p, void **t_p)
{
ssize_t n;
libusb_device *dev;
int i;
int ifc_no;
int set_no;
int idx = 0;
int err = 0;
*idx_max_p = 0;
*t_p = NULL;
if (!initialized_usb)
{
int rc;
if ((rc = libusb_init (NULL)))
{
DEBUGOUT_1 ("usb_init failed: %s.\n", libusb_error_name (rc));
return gpg_error (GPG_ERR_ENODEV);
}
initialized_usb = 1;
}
n = libusb_get_device_list (NULL, &ccid_usb_dev_list);
for (i = 0; i < n; i++)
{
struct libusb_config_descriptor *config;
struct libusb_device_descriptor desc;
dev = ccid_usb_dev_list[i];
if (libusb_get_device_descriptor (dev, &desc))
continue;
if (libusb_get_active_config_descriptor (dev, &config))
continue;
for (ifc_no=0; ifc_no < config->bNumInterfaces; ifc_no++)
for (set_no=0; set_no < config->interface[ifc_no].num_altsetting;
set_no++)
{
const struct libusb_interface_descriptor *ifcdesc;
ifcdesc = &config->interface[ifc_no].altsetting[set_no];
/* The second condition is for older SCM SPR 532 who did
not know about the assigned CCID class. The third
condition does the same for a Cherry SmartTerminal
ST-2000. Instead of trying to interpret the strings
we simply check the product ID. */
if (ifcdesc && ifcdesc->extra
&& ((ifcdesc->bInterfaceClass == 11
&& ifcdesc->bInterfaceSubClass == 0
&& ifcdesc->bInterfaceProtocol == 0)
|| (ifcdesc->bInterfaceClass == 255
&& desc.idVendor == VENDOR_SCM
&& desc.idProduct == SCM_SPR532)
|| (ifcdesc->bInterfaceClass == 255
&& desc.idVendor == VENDOR_CHERRY
&& desc.idProduct == CHERRY_ST2000)))
{
/* Found a reader. */
unsigned char *ifcdesc_extra;
ifcdesc_extra = malloc (ifcdesc->extra_length);
if (!ifcdesc_extra)
{
err = gpg_error_from_syserror ();
libusb_free_config_descriptor (config);
goto scan_finish;
}
memcpy (ifcdesc_extra, ifcdesc->extra, ifcdesc->extra_length);
ccid_dev_table[idx].n = i;
ccid_dev_table[idx].interface_number = ifc_no;
ccid_dev_table[idx].setting_number = set_no;
ccid_dev_table[idx].ifcdesc_extra = ifcdesc_extra;
ccid_dev_table[idx].ifcdesc_extra_len = ifcdesc->extra_length;
ccid_dev_table[idx].ep_bulk_out = find_endpoint (ifcdesc, 0);
ccid_dev_table[idx].ep_bulk_in = find_endpoint (ifcdesc, 1);
ccid_dev_table[idx].ep_intr = find_endpoint (ifcdesc, 2);
idx++;
if (idx >= CCID_MAX_DEVICE)
{
libusb_free_config_descriptor (config);
err = 0;
goto scan_finish;
}
}
}
libusb_free_config_descriptor (config);
}
scan_finish:
if (err)
{
for (i = 0; i < idx; i++)
{
free (ccid_dev_table[i].ifcdesc_extra);
ccid_dev_table[i].n = 0;
ccid_dev_table[i].interface_number = 0;
ccid_dev_table[i].setting_number = 0;
ccid_dev_table[i].ifcdesc_extra = NULL;
ccid_dev_table[i].ifcdesc_extra_len = 0;
ccid_dev_table[i].ep_bulk_out = 0;
ccid_dev_table[i].ep_bulk_in = 0;
ccid_dev_table[i].ep_intr = 0;
}
libusb_free_device_list (ccid_usb_dev_list, 1);
ccid_usb_dev_list = NULL;
}
else
{
*idx_max_p = idx;
if (idx)
*t_p = ccid_dev_table;
else
*t_p = NULL;
}
return err;
}
void
ccid_dev_scan_finish (void *tbl0, int max)
{
int i;
struct ccid_dev_table *tbl = tbl0;
for (i = 0; i < max; i++)
{
free (tbl[i].ifcdesc_extra);
tbl[i].n = 0;
tbl[i].interface_number = 0;
tbl[i].setting_number = 0;
tbl[i].ifcdesc_extra = NULL;
tbl[i].ifcdesc_extra_len = 0;
tbl[i].ep_bulk_out = 0;
tbl[i].ep_bulk_in = 0;
tbl[i].ep_intr = 0;
}
libusb_free_device_list (ccid_usb_dev_list, 1);
ccid_usb_dev_list = NULL;
}
unsigned int
ccid_get_BAI (int idx, void *tbl0)
{
int n;
int bus, addr, intf;
unsigned int bai;
libusb_device *dev;
struct ccid_dev_table *tbl = tbl0;
n = tbl[idx].n;
dev = ccid_usb_dev_list[n];
bus = libusb_get_bus_number (dev);
addr = libusb_get_device_address (dev);
intf = tbl[idx].interface_number;
bai = (bus << 16) | (addr << 8) | intf;
return bai;
}
int
ccid_compare_BAI (ccid_driver_t handle, unsigned int bai)
{
return handle->bai == bai;
}
static void
intr_cb (struct libusb_transfer *transfer)
{
ccid_driver_t handle = transfer->user_data;
DEBUGOUT_2 ("CCID: interrupt callback %d (%d)\n",
transfer->status, transfer->actual_length);
if (transfer->status == LIBUSB_TRANSFER_TIMED_OUT)
{
int err;
submit_again:
/* Submit the URB again to keep watching the INTERRUPT transfer. */
err = libusb_submit_transfer (transfer);
if (err == LIBUSB_ERROR_NO_DEVICE)
goto device_removed;
DEBUGOUT_1 ("CCID submit transfer again %d\n", err);
}
else if (transfer->status == LIBUSB_TRANSFER_COMPLETED)
{
size_t len = transfer->actual_length;
unsigned char *p = transfer->buffer;
int card_removed = 0;
while (len)
{
if (*p == RDR_to_PC_NotifySlotChange)
{
if (len < 2)
break;
DEBUGOUT_1 ("CCID: NotifySlotChange: %02x\n", p[1]);
if ((p[1] & 1))
card_removed = 0;
else
card_removed = 1;
p += 2;
len -= 2;
}
else if (*p == RDR_to_PC_HardwareError)
{
if (len < 4)
break;
DEBUGOUT_1 ("CCID: hardware error detected: %02x\n", p[3]);
p += 4;
len -= 4;
}
else
{
DEBUGOUT_1 ("CCID: unknown intr: %02x\n", p[0]);
break;
}
}
if (card_removed)
{
DEBUGOUT ("CCID: card removed\n");
handle->powered_off = 1;
#if defined(GNUPG_MAJOR_VERSION)
scd_kick_the_loop ();
#endif
}
else
{
/* Event other than card removal. */
goto submit_again;
}
}
else if (transfer->status == LIBUSB_TRANSFER_CANCELLED)
handle->powered_off = 1;
else if (transfer->status == LIBUSB_TRANSFER_OVERFLOW)
{
/* Something goes wrong. Ignore. */
DEBUGOUT ("CCID: interrupt transfer overflow\n");
}
else
{
device_removed:
DEBUGOUT ("CCID: device removed\n");
handle->powered_off = 1;
#if defined(GNUPG_MAJOR_VERSION)
scd_kick_the_loop ();
#endif
}
}
static void
ccid_setup_intr (ccid_driver_t handle)
{
struct libusb_transfer *transfer;
int err;
transfer = libusb_alloc_transfer (0);
handle->transfer = transfer;
libusb_fill_interrupt_transfer (transfer, handle->idev, handle->ep_intr,
handle->intr_buf, sizeof (handle->intr_buf),
intr_cb, handle, 0);
err = libusb_submit_transfer (transfer);
DEBUGOUT_2 ("CCID submit transfer (%x): %d", handle->ep_intr, err);
}
static void *
ccid_usb_thread (void *arg)
{
libusb_context *ctx = arg;
while (ccid_usb_thread_is_alive)
{
#ifdef USE_NPTH
npth_unprotect ();
#endif
libusb_handle_events_completed (ctx, NULL);
#ifdef USE_NPTH
npth_protect ();
#endif
}
return NULL;
}
static int
ccid_open_usb_reader (const char *spec_reader_name,
int idx, void *ccid_table0,
ccid_driver_t *handle, char **rdrname_p)
{
libusb_device *dev;
libusb_device_handle *idev = NULL;
char *rid = NULL;
int rc = 0;
int ifc_no, set_no;
struct libusb_device_descriptor desc;
int n;
int bus, addr;
unsigned int bai;
struct ccid_dev_table *ccid_table = ccid_table0;
n = ccid_table[idx].n;
ifc_no = ccid_table[idx].interface_number;
set_no = ccid_table[idx].setting_number;
dev = ccid_usb_dev_list[n];
bus = libusb_get_bus_number (dev);
addr = libusb_get_device_address (dev);
bai = (bus << 16) | (addr << 8) | ifc_no;
rc = libusb_open (dev, &idev);
if (rc)
{
DEBUGOUT_1 ("usb_open failed: %s\n", libusb_error_name (rc));
free (*handle);
*handle = NULL;
return map_libusb_error (rc);
}
if (ccid_usb_thread_is_alive++ == 0)
{
npth_t thread;
npth_attr_t tattr;
int err;
err = npth_attr_init (&tattr);
if (err)
{
DEBUGOUT_1 ("npth_attr_init failed: %s\n", strerror (err));
free (*handle);
*handle = NULL;
return err;
}
npth_attr_setdetachstate (&tattr, NPTH_CREATE_DETACHED);
err = npth_create (&thread, &tattr, ccid_usb_thread, NULL);
if (err)
{
DEBUGOUT_1 ("npth_create failed: %s\n", strerror (err));
free (*handle);
*handle = NULL;
return err;
}
npth_setname_np (thread, "ccid_usb_thread");
npth_attr_destroy (&tattr);
}
rc = libusb_get_device_descriptor (dev, &desc);
if (rc)
{
DEBUGOUT ("get_device_descripor failed\n");
rc = map_libusb_error (rc);
goto leave;
}
rid = make_reader_id (idev, desc.idVendor, desc.idProduct,
desc.iSerialNumber);
/* Check to see if reader name matches the spec. */
if (spec_reader_name
&& strncmp (rid, spec_reader_name, strlen (spec_reader_name)))
{
DEBUGOUT ("device not matched\n");
rc = CCID_DRIVER_ERR_NO_READER;
goto leave;
}
(*handle)->id_vendor = desc.idVendor;
(*handle)->id_product = desc.idProduct;
(*handle)->idev = idev;
(*handle)->bai = bai;
(*handle)->ifc_no = ifc_no;
(*handle)->ep_bulk_out = ccid_table[idx].ep_bulk_out;
(*handle)->ep_bulk_in = ccid_table[idx].ep_bulk_in;
(*handle)->ep_intr = ccid_table[idx].ep_intr;
DEBUGOUT_2 ("using CCID reader %d (ID=%s)\n", idx, rid);
if (parse_ccid_descriptor (*handle, desc.bcdDevice,
ccid_table[idx].ifcdesc_extra,
ccid_table[idx].ifcdesc_extra_len))
{
DEBUGOUT ("device not supported\n");
rc = CCID_DRIVER_ERR_NO_READER;
goto leave;
}
#ifdef USE_NPTH
npth_unprotect ();
#endif
+ if (!(opt.compat_flags & COMPAT_CCID_NO_AUTO_DETACH))
+ {
+ rc = libusb_set_auto_detach_kernel_driver (idev, 1);
+ if (rc)
+ {
+#ifdef USE_NPTH
+ npth_protect ();
+#endif
+ DEBUGOUT_1 ("note: set_auto_detach_kernel_driver failed: %d\n", rc);
+#ifdef USE_NPTH
+ npth_unprotect ();
+#endif
+ }
+ }
rc = libusb_claim_interface (idev, ifc_no);
if (rc)
{
#ifdef USE_NPTH
npth_protect ();
#endif
DEBUGOUT_1 ("usb_claim_interface failed: %d\n", rc);
rc = map_libusb_error (rc);
goto leave;
}
/* Submit SET_INTERFACE control transfer which can reset the device. */
rc = libusb_set_interface_alt_setting (idev, ifc_no, set_no);
if (rc)
{
#ifdef USE_NPTH
npth_protect ();
#endif
DEBUGOUT_1 ("usb_set_interface_alt_setting failed: %d\n", rc);
rc = map_libusb_error (rc);
goto leave;
}
#ifdef USE_NPTH
npth_protect ();
#endif
rc = ccid_vendor_specific_init (*handle);
leave:
if (rc)
{
--ccid_usb_thread_is_alive;
free (rid);
libusb_release_interface (idev, ifc_no);
libusb_close (idev);
free (*handle);
*handle = NULL;
}
else
{
if (rdrname_p)
*rdrname_p = rid;
else
free (rid);
}
return rc;
}
/* Open the reader with the internal number READERNO and return a
pointer to be used as handle in HANDLE. Returns 0 on success. */
int
ccid_open_reader (const char *spec_reader_name, int idx,
void *ccid_table0,
ccid_driver_t *handle, char **rdrname_p)
{
struct ccid_dev_table *ccid_table = ccid_table0;
*handle = calloc (1, sizeof **handle);
if (!*handle)
{
DEBUGOUT ("out of memory\n");
return CCID_DRIVER_ERR_OUT_OF_CORE;
}
return ccid_open_usb_reader (spec_reader_name, idx, ccid_table,
handle, rdrname_p);
}
int
ccid_require_get_status (ccid_driver_t handle)
{
/* When a card reader supports interrupt transfer to check the
status of card, it is possible to submit only an interrupt
transfer, and no check is required by application layer. USB can
detect removal of a card and can detect removal of a reader.
*/
if (handle->ep_intr >= 0)
{
if (handle->id_vendor != VENDOR_SCM)
return 0;
/*
* For card reader with interrupt transfer support, ideally,
* removal is detected by intr_cb, but some card reader
* (e.g. SPR532) has a possible case of missing report to
* intr_cb, and another case of valid report to intr_cb.
*
* For such a reader, the removal should be able to be detected
* by PC_to_RDR_GetSlotStatus, too. Thus, calls to
* ccid_slot_status should go on wire even if "on_wire" is not
* requested.
*
*/
if (handle->transfer == NULL)
return 0;
}
/* Libusb actually detects the removal of USB device in use.
However, there is no good API to handle the removal (yet),
cleanly and with good portability.
There is libusb_set_pollfd_notifiers function, but it doesn't
offer libusb_device_handle* data to its callback. So, when it
watches multiple devices, there is no way to know which device is
removed.
Once, we will have a good programming interface of libusb, we can
list tokens (with no interrupt transfer support, but always with
card inserted) here to return 0, so that scdaemon can submit
minimum packet on wire.
*/
return 1;
}
static int
send_power_off (ccid_driver_t handle)
{
int rc;
unsigned char msg[100];
size_t msglen;
unsigned char seqno;
msg[0] = PC_to_RDR_IccPowerOff;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
msg[7] = 0; /* RFU */
msg[8] = 0; /* RFU */
msg[9] = 0; /* RFU */
set_msg_len (msg, 0);
msglen = 10;
rc = bulk_out (handle, msg, msglen, 0);
if (!rc)
bulk_in (handle, msg, sizeof msg, &msglen, RDR_to_PC_SlotStatus,
seqno, 2000, 0);
return rc;
}
static void
do_close_reader (ccid_driver_t handle)
{
int rc;
if (!handle->powered_off)
send_power_off (handle);
if (handle->transfer)
{
if (!handle->powered_off)
{
DEBUGOUT ("libusb_cancel_transfer\n");
rc = libusb_cancel_transfer (handle->transfer);
if (rc != LIBUSB_ERROR_NOT_FOUND)
while (!handle->powered_off)
{
DEBUGOUT ("libusb_handle_events_completed\n");
#ifdef USE_NPTH
npth_unprotect ();
#endif
libusb_handle_events_completed (NULL, &handle->powered_off);
#ifdef USE_NPTH
npth_protect ();
#endif
}
}
libusb_free_transfer (handle->transfer);
handle->transfer = NULL;
}
DEBUGOUT ("libusb_release_interface and libusb_close\n");
libusb_release_interface (handle->idev, handle->ifc_no);
--ccid_usb_thread_is_alive;
libusb_close (handle->idev);
handle->idev = NULL;
}
int
ccid_set_progress_cb (ccid_driver_t handle,
void (*cb)(void *, const char *, int, int, int),
void *cb_arg)
{
if (!handle)
return CCID_DRIVER_ERR_INV_VALUE;
handle->progress_cb = cb;
handle->progress_cb_arg = cb_arg;
return 0;
}
int
ccid_set_prompt_cb (ccid_driver_t handle,
void (*cb)(void *, int), void *cb_arg)
{
if (!handle)
return CCID_DRIVER_ERR_INV_VALUE;
handle->prompt_cb = cb;
handle->prompt_cb_arg = cb_arg;
return 0;
}
/* Close the reader HANDLE. */
int
ccid_close_reader (ccid_driver_t handle)
{
if (!handle)
return 0;
do_close_reader (handle);
free (handle);
return 0;
}
/* Return False if a card is present and powered. */
int
ccid_check_card_presence (ccid_driver_t handle)
{
(void)handle; /* Not yet implemented. */
return -1;
}
/* Write a MSG of length MSGLEN to the designated bulk out endpoint.
Returns 0 on success. */
static int
bulk_out (ccid_driver_t handle, unsigned char *msg, size_t msglen,
int no_debug)
{
int rc;
int transferred;
/* No need to continue and clutter the log with USB write error
messages after we got the first ENODEV. */
if (handle->enodev_seen)
return CCID_DRIVER_ERR_NO_READER;
if (debug_level && (!no_debug || debug_level >= 3))
{
switch (msglen? msg[0]:0)
{
case PC_to_RDR_IccPowerOn:
print_p2r_iccpoweron (msg, msglen);
break;
case PC_to_RDR_IccPowerOff:
print_p2r_iccpoweroff (msg, msglen);
break;
case PC_to_RDR_GetSlotStatus:
print_p2r_getslotstatus (msg, msglen);
break;
case PC_to_RDR_XfrBlock:
print_p2r_xfrblock (msg, msglen);
break;
case PC_to_RDR_GetParameters:
print_p2r_getparameters (msg, msglen);
break;
case PC_to_RDR_ResetParameters:
print_p2r_resetparameters (msg, msglen);
break;
case PC_to_RDR_SetParameters:
print_p2r_setparameters (msg, msglen);
break;
case PC_to_RDR_Escape:
print_p2r_escape (msg, msglen);
break;
case PC_to_RDR_IccClock:
print_p2r_iccclock (msg, msglen);
break;
case PC_to_RDR_T0APDU:
print_p2r_to0apdu (msg, msglen);
break;
case PC_to_RDR_Secure:
print_p2r_secure (msg, msglen);
break;
case PC_to_RDR_Mechanical:
print_p2r_mechanical (msg, msglen);
break;
case PC_to_RDR_Abort:
print_p2r_abort (msg, msglen);
break;
case PC_to_RDR_SetDataRate:
print_p2r_setdatarate (msg, msglen);
break;
default:
print_p2r_unknown (msg, msglen);
break;
}
}
#ifdef USE_NPTH
npth_unprotect ();
#endif
rc = libusb_bulk_transfer (handle->idev, handle->ep_bulk_out,
msg, msglen, &transferred,
5000 /* ms timeout */);
#ifdef USE_NPTH
npth_protect ();
#endif
if (rc == 0 && transferred == msglen)
return 0;
if (rc)
{
DEBUGOUT_1 ("usb_bulk_write error: %s\n", libusb_error_name (rc));
if (rc == LIBUSB_ERROR_NO_DEVICE)
{
handle->enodev_seen = 1;
return CCID_DRIVER_ERR_NO_READER;
}
}
return 0;
}
/* Read a maximum of LENGTH bytes from the bulk in endpoint into
BUFFER and return the actual read number if bytes in NREAD. SEQNO
is the sequence number used to send the request and EXPECTED_TYPE
the type of message we expect. Does checks on the ccid
header. TIMEOUT is the timeout value in ms. NO_DEBUG may be set to
avoid debug messages in case of no error; this can be overridden
with a glibal debug level of at least 3. Returns 0 on success. */
static int
bulk_in (ccid_driver_t handle, unsigned char *buffer, size_t length,
size_t *nread, int expected_type, int seqno, int timeout,
int no_debug)
{
int rc;
int msglen;
int notified = 0;
int bwi = 1;
/* Fixme: The next line for the current Valgrind without support
for USB IOCTLs. */
memset (buffer, 0, length);
retry:
#ifdef USE_NPTH
npth_unprotect ();
#endif
rc = libusb_bulk_transfer (handle->idev, handle->ep_bulk_in,
buffer, length, &msglen, bwi*timeout);
#ifdef USE_NPTH
npth_protect ();
#endif
if (rc)
{
DEBUGOUT_1 ("usb_bulk_read error: %s\n", libusb_error_name (rc));
if (rc == LIBUSB_ERROR_NO_DEVICE)
handle->enodev_seen = 1;
return map_libusb_error (rc);
}
if (msglen < 0)
return CCID_DRIVER_ERR_INV_VALUE; /* Faulty libusb. */
*nread = msglen;
if (msglen < 10)
{
DEBUGOUT_1 ("bulk-in msg too short (%u)\n", (unsigned int)msglen);
abort_cmd (handle, seqno, 0);
return CCID_DRIVER_ERR_INV_VALUE;
}
if (buffer[5] != 0)
{
DEBUGOUT_1 ("unexpected bulk-in slot (%d)\n", buffer[5]);
return CCID_DRIVER_ERR_INV_VALUE;
}
if (buffer[6] != seqno)
{
DEBUGOUT_2 ("bulk-in seqno does not match (%d/%d)\n",
seqno, buffer[6]);
/* Retry until we are synced again. */
goto retry;
}
/* We need to handle the time extension request before we check that
we got the expected message type. This is in particular required
for the Cherry keyboard which sends a time extension request for
each key hit. */
if (!(buffer[7] & 0x03) && (buffer[7] & 0xC0) == 0x80)
{
/* Card present and active, time extension requested. */
DEBUGOUT_2 ("time extension requested (%02X,%02X)\n",
buffer[7], buffer[8]);
bwi = 1;
if (buffer[8] != 0 && buffer[8] != 0xff)
bwi = buffer[8];
/* Gnuk enhancement to prompt user input by ack button */
if (buffer[8] == 0xff && !notified)
{
notified = 1;
handle->prompt_cb (handle->prompt_cb_arg, 1);
}
goto retry;
}
if (notified)
handle->prompt_cb (handle->prompt_cb_arg, 0);
if (buffer[0] != expected_type && buffer[0] != RDR_to_PC_SlotStatus)
{
DEBUGOUT_1 ("unexpected bulk-in msg type (%02x)\n", buffer[0]);
abort_cmd (handle, seqno, 0);
return CCID_DRIVER_ERR_INV_VALUE;
}
if (debug_level && (!no_debug || debug_level >= 3))
{
switch (buffer[0])
{
case RDR_to_PC_DataBlock:
print_r2p_datablock (buffer, msglen);
break;
case RDR_to_PC_SlotStatus:
print_r2p_slotstatus (buffer, msglen);
break;
case RDR_to_PC_Parameters:
print_r2p_parameters (buffer, msglen);
break;
case RDR_to_PC_Escape:
print_r2p_escape (buffer, msglen);
break;
case RDR_to_PC_DataRate:
print_r2p_datarate (buffer, msglen);
break;
default:
print_r2p_unknown (buffer, msglen);
break;
}
}
if (CCID_COMMAND_FAILED (buffer))
{
int ec;
ec = CCID_ERROR_CODE (buffer);
print_command_failed (buffer);
if (ec == 0xEF)
return CCID_DRIVER_ERR_UI_CANCELLED;
else if (ec == 0xF0)
return CCID_DRIVER_ERR_UI_TIMEOUT;
}
/* Check whether a card is at all available. Note: If you add new
error codes here, check whether they need to be ignored in
send_escape_cmd. */
switch ((buffer[7] & 0x03))
{
case 0: /* no error */ break;
case 1: rc = CCID_DRIVER_ERR_CARD_INACTIVE; break;
case 2: rc = CCID_DRIVER_ERR_NO_CARD; break;
case 3: /* RFU */ break;
}
if (rc)
{
/*
* Communication failure by device side.
* Possibly, it was forcibly suspended and resumed.
*/
if (handle->ep_intr < 0)
{
DEBUGOUT ("CCID: card inactive/removed\n");
handle->powered_off = 1;
}
#if defined(GNUPG_MAJOR_VERSION)
scd_kick_the_loop ();
#endif
}
return rc;
}
/* Send an abort sequence and wait until everything settled. */
static int
abort_cmd (ccid_driver_t handle, int seqno, int init)
{
int rc;
unsigned char dummybuf[8];
unsigned char msg[100];
int msglen;
seqno &= 0xff;
DEBUGOUT_1 ("sending abort sequence for seqno %d\n", seqno);
/* Send the abort command to the control pipe. Note that we don't
need to keep track of sent abort commands because there should
never be another thread using the same slot concurrently. */
#ifdef USE_NPTH
npth_unprotect ();
#endif
rc = libusb_control_transfer (handle->idev,
0x21,/* bmRequestType: host-to-device,
class specific, to interface. */
1, /* ABORT */
(seqno << 8 | 0 /* slot */),
handle->ifc_no,
dummybuf, 0,
1000 /* ms timeout */);
#ifdef USE_NPTH
npth_protect ();
#endif
if (rc)
{
DEBUGOUT_1 ("usb_control_msg error: %s\n", libusb_error_name (rc));
if (!init)
return map_libusb_error (rc);
}
/* Now send the abort command to the bulk out pipe using the same
SEQNO and SLOT. Do this in a loop to so that all seqno are
tried. */
seqno--; /* Adjust for next increment. */
do
{
int transferred;
seqno++;
msg[0] = PC_to_RDR_Abort;
msg[5] = 0; /* slot */
msg[6] = seqno;
msg[7] = 0; /* RFU */
msg[8] = 0; /* RFU */
msg[9] = 0; /* RFU */
msglen = 10;
set_msg_len (msg, 0);
#ifdef USE_NPTH
npth_unprotect ();
#endif
rc = libusb_bulk_transfer (handle->idev, handle->ep_bulk_out,
msg, msglen, &transferred,
init? 100: 5000 /* ms timeout */);
#ifdef USE_NPTH
npth_protect ();
#endif
if (rc == 0 && transferred == msglen)
rc = 0;
else if (rc)
DEBUGOUT_1 ("usb_bulk_write error in abort_cmd: %s\n",
libusb_error_name (rc));
if (rc)
return map_libusb_error (rc);
#ifdef USE_NPTH
npth_unprotect ();
#endif
rc = libusb_bulk_transfer (handle->idev, handle->ep_bulk_in,
msg, sizeof msg, &msglen,
init? 100: 5000 /*ms timeout*/);
#ifdef USE_NPTH
npth_protect ();
#endif
if (rc)
{
DEBUGOUT_1 ("usb_bulk_read error in abort_cmd: %s\n",
libusb_error_name (rc));
if (init && rc == LIBUSB_ERROR_TIMEOUT)
continue;
else
return map_libusb_error (rc);
}
if (msglen < 10)
{
DEBUGOUT_1 ("bulk-in msg in abort_cmd too short (%u)\n",
(unsigned int)msglen);
return CCID_DRIVER_ERR_INV_VALUE;
}
if (msg[5] != 0)
{
DEBUGOUT_1 ("unexpected bulk-in slot (%d) in abort_cmd\n", msg[5]);
return CCID_DRIVER_ERR_INV_VALUE;
}
DEBUGOUT_3 ("status: %02X error: %02X octet[9]: %02X\n",
msg[7], msg[8], msg[9]);
if (CCID_COMMAND_FAILED (msg))
print_command_failed (msg);
}
while (rc == LIBUSB_ERROR_TIMEOUT
|| (msg[0] != RDR_to_PC_SlotStatus && msg[5] != 0 && msg[6] != seqno));
handle->seqno = ((seqno + 1) & 0xff);
DEBUGOUT ("sending abort sequence succeeded\n");
return 0;
}
/* Note that this function won't return the error codes NO_CARD or
CARD_INACTIVE. IF RESULT is not NULL, the result from the
operation will get returned in RESULT and its length in RESULTLEN.
If the response is larger than RESULTMAX, an error is returned and
the required buffer length returned in RESULTLEN. */
static int
send_escape_cmd (ccid_driver_t handle,
const unsigned char *data, size_t datalen,
unsigned char *result, size_t resultmax, size_t *resultlen)
{
int rc;
unsigned char msg[100];
size_t msglen;
unsigned char seqno;
if (resultlen)
*resultlen = 0;
if (datalen > sizeof msg - 10)
return CCID_DRIVER_ERR_INV_VALUE; /* Escape data too large. */
msg[0] = PC_to_RDR_Escape;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
msg[7] = 0; /* RFU */
msg[8] = 0; /* RFU */
msg[9] = 0; /* RFU */
memcpy (msg+10, data, datalen);
msglen = 10 + datalen;
set_msg_len (msg, datalen);
rc = bulk_out (handle, msg, msglen, 0);
if (rc)
return rc;
rc = bulk_in (handle, msg, sizeof msg, &msglen, RDR_to_PC_Escape,
seqno, 5000, 0);
if (result)
switch (rc)
{
/* We need to ignore certain errorcode here. */
case 0:
case CCID_DRIVER_ERR_CARD_INACTIVE:
case CCID_DRIVER_ERR_NO_CARD:
{
if (msglen > resultmax)
rc = CCID_DRIVER_ERR_INV_VALUE; /* Response too large. */
else
{
memcpy (result, msg, msglen);
if (resultlen)
*resultlen = msglen;
rc = 0;
}
}
break;
default:
break;
}
return rc;
}
int
ccid_transceive_escape (ccid_driver_t handle,
const unsigned char *data, size_t datalen,
unsigned char *resp, size_t maxresplen, size_t *nresp)
{
return send_escape_cmd (handle, data, datalen, resp, maxresplen, nresp);
}
/* experimental */
int
ccid_poll (ccid_driver_t handle)
{
int rc;
unsigned char msg[10];
int msglen;
int i, j;
rc = libusb_interrupt_transfer (handle->idev, handle->ep_intr,
msg, sizeof msg, &msglen,
0 /* ms timeout */ );
if (rc == LIBUSB_ERROR_TIMEOUT)
return 0;
if (rc)
{
DEBUGOUT_1 ("usb_intr_read error: %s\n", libusb_error_name (rc));
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
if (msglen < 1)
{
DEBUGOUT ("intr-in msg too short\n");
return CCID_DRIVER_ERR_INV_VALUE;
}
if (msg[0] == RDR_to_PC_NotifySlotChange)
{
DEBUGOUT ("notify slot change:");
for (i=1; i < msglen; i++)
for (j=0; j < 4; j++)
DEBUGOUT_CONT_3 (" %d:%c%c",
(i-1)*4+j,
(msg[i] & (1<<(j*2)))? 'p':'-',
(msg[i] & (2<<(j*2)))? '*':' ');
DEBUGOUT_LF ();
}
else if (msg[0] == RDR_to_PC_HardwareError)
{
DEBUGOUT ("hardware error occurred\n");
}
else
{
DEBUGOUT_1 ("unknown intr-in msg of type %02X\n", msg[0]);
}
return 0;
}
/* Note that this function won't return the error codes NO_CARD or
CARD_INACTIVE */
int
ccid_slot_status (ccid_driver_t handle, int *statusbits, int on_wire)
{
int rc;
unsigned char msg[100];
size_t msglen;
unsigned char seqno;
int retries = 0;
if (handle->powered_off)
return CCID_DRIVER_ERR_NO_READER;
/* If the card (with its lower-level driver) doesn't require
GET_STATUS on wire (because it supports INTERRUPT transfer for
status change, or it's a token which has a card always inserted),
no need to send on wire. */
if (!on_wire && !ccid_require_get_status (handle))
{
/* Setup interrupt transfer at the initial call of slot_status
with ON_WIRE == 0 */
if (handle->transfer == NULL)
ccid_setup_intr (handle);
*statusbits = 0;
return 0;
}
retry:
msg[0] = PC_to_RDR_GetSlotStatus;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
msg[7] = 0; /* RFU */
msg[8] = 0; /* RFU */
msg[9] = 0; /* RFU */
set_msg_len (msg, 0);
rc = bulk_out (handle, msg, 10, 1);
if (rc)
return rc;
/* Note that we set the NO_DEBUG flag here, so that the logs won't
get cluttered up by a ticker function checking for the slot
status and debugging enabled. */
rc = bulk_in (handle, msg, sizeof msg, &msglen, RDR_to_PC_SlotStatus,
seqno, retries? 1000 : 200, 1);
if ((rc == CCID_DRIVER_ERR_CARD_IO_ERROR || rc == CCID_DRIVER_ERR_USB_TIMEOUT)
&& retries < 3)
{
if (!retries)
{
DEBUGOUT ("USB: CALLING USB_CLEAR_HALT\n");
#ifdef USE_NPTH
npth_unprotect ();
#endif
libusb_clear_halt (handle->idev, handle->ep_bulk_in);
libusb_clear_halt (handle->idev, handle->ep_bulk_out);
#ifdef USE_NPTH
npth_protect ();
#endif
}
else
DEBUGOUT ("USB: RETRYING bulk_in AGAIN\n");
retries++;
goto retry;
}
if (rc && rc != CCID_DRIVER_ERR_NO_CARD && rc != CCID_DRIVER_ERR_CARD_INACTIVE)
return rc;
*statusbits = (msg[7] & 3);
return 0;
}
/* Parse ATR string (of ATRLEN) and update parameters at PARAM.
Calling this routine, it should prepare default values at PARAM
beforehand. This routine assumes that card is accessed by T=1
protocol. It doesn't analyze historical bytes at all.
Returns < 0 value on error:
-1 for parse error or integrity check error
-2 for card doesn't support T=1 protocol
-3 for parameters are nod explicitly defined by ATR
-4 for this driver doesn't support CRC
Returns >= 0 on success:
0 for card is negotiable mode
1 for card is specific mode (and not negotiable)
*/
static int
update_param_by_atr (unsigned char *param, unsigned char *atr, size_t atrlen)
{
int i = -1;
int t, y, chk;
int historical_bytes_num, negotiable = 1;
#define NEXTBYTE() do { i++; if (atrlen <= i) return -1; } while (0)
NEXTBYTE ();
if (atr[i] == 0x3F)
param[1] |= 0x02; /* Convention is inverse. */
NEXTBYTE ();
y = (atr[i] >> 4);
historical_bytes_num = atr[i] & 0x0f;
NEXTBYTE ();
if ((y & 1))
{
param[0] = atr[i]; /* TA1 - Fi & Di */
NEXTBYTE ();
}
if ((y & 2))
NEXTBYTE (); /* TB1 - ignore */
if ((y & 4))
{
param[2] = atr[i]; /* TC1 - Guard Time */
NEXTBYTE ();
}
if ((y & 8))
{
y = (atr[i] >> 4); /* TD1 */
t = atr[i] & 0x0f;
NEXTBYTE ();
if ((y & 1))
{ /* TA2 - PPS mode */
if ((atr[i] & 0x0f) != 1)
return -2; /* Wrong card protocol (!= 1). */
if ((atr[i] & 0x10) != 0x10)
return -3; /* Transmission parameters are implicitly defined. */
negotiable = 0; /* TA2 means specific mode. */
NEXTBYTE ();
}
if ((y & 2))
NEXTBYTE (); /* TB2 - ignore */
if ((y & 4))
NEXTBYTE (); /* TC2 - ignore */
if ((y & 8))
{
y = (atr[i] >> 4); /* TD2 */
t = atr[i] & 0x0f;
NEXTBYTE ();
}
else
y = 0;
while (y)
{
if ((y & 1))
{ /* TAx */
if (t == 1)
param[5] = atr[i]; /* IFSC */
else if (t == 15)
/* XXX: check voltage? */
param[4] = (atr[i] >> 6); /* ClockStop */
NEXTBYTE ();
}
if ((y & 2))
{
if (t == 1)
param[3] = atr[i]; /* TBx - BWI & CWI */
NEXTBYTE ();
}
if ((y & 4))
{
if (t == 1)
param[1] |= (atr[i] & 0x01); /* TCx - LRC/CRC */
NEXTBYTE ();
if (param[1] & 0x01)
return -4; /* CRC not supported yet. */
}
if ((y & 8))
{
y = (atr[i] >> 4); /* TDx */
t = atr[i] & 0x0f;
NEXTBYTE ();
}
else
y = 0;
}
}
i += historical_bytes_num - 1;
NEXTBYTE ();
if (atrlen != i+1)
return -1;
#undef NEXTBYTE
chk = 0;
do
{
chk ^= atr[i];
i--;
}
while (i > 0);
if (chk != 0)
return -1;
return negotiable;
}
/* Return the ATR of the card. This is not a cached value and thus an
actual reset is done. */
int
ccid_get_atr (ccid_driver_t handle,
unsigned char *atr, size_t maxatrlen, size_t *atrlen)
{
int rc;
int statusbits;
unsigned char msg[100];
unsigned char *tpdu;
size_t msglen, tpdulen;
unsigned char seqno;
int use_crc = 0;
unsigned int edc;
int tried_iso = 0;
int got_param;
unsigned char param[7] = { /* For Protocol T=1 */
0x11, /* bmFindexDindex */
0x10, /* bmTCCKST1 */
0x00, /* bGuardTimeT1 */
0x4d, /* bmWaitingIntegersT1 */
0x00, /* bClockStop */
0x20, /* bIFSC */
0x00 /* bNadValue */
};
/* First check whether a card is available. */
rc = ccid_slot_status (handle, &statusbits, 1);
if (rc)
return rc;
if (statusbits == 2)
return CCID_DRIVER_ERR_NO_CARD;
/*
* In the first invocation of ccid_slot_status, card reader may
* return CCID_DRIVER_ERR_CARD_INACTIVE and handle->powered_off may
* become 1. Because inactive card is no problem (we are turning it
* ON here), clear the flag.
*/
handle->powered_off = 0;
/* For an inactive and also for an active card, issue the PowerOn
command to get the ATR. */
again:
msg[0] = PC_to_RDR_IccPowerOn;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
/* power select (0=auto, 1=5V, 2=3V, 3=1.8V) */
msg[7] = handle->auto_voltage ? 0 : 1;
msg[8] = 0; /* RFU */
msg[9] = 0; /* RFU */
set_msg_len (msg, 0);
msglen = 10;
rc = bulk_out (handle, msg, msglen, 0);
if (rc)
return rc;
rc = bulk_in (handle, msg, sizeof msg, &msglen, RDR_to_PC_DataBlock,
seqno, 5000, 0);
if (rc)
return rc;
if (!tried_iso && CCID_COMMAND_FAILED (msg) && CCID_ERROR_CODE (msg) == 0xbb
&& ((handle->id_vendor == VENDOR_CHERRY
&& handle->id_product == 0x0005)
|| (handle->id_vendor == VENDOR_GEMPC
&& handle->id_product == 0x4433)
))
{
tried_iso = 1;
/* Try switching to ISO mode. */
if (!send_escape_cmd (handle, (const unsigned char*)"\xF1\x01", 2,
NULL, 0, NULL))
goto again;
}
else if (statusbits == 0 && CCID_COMMAND_FAILED (msg))
{
/* Card was active already, and something went wrong with
PC_to_RDR_IccPowerOn command. It may be baud-rate mismatch
between the card and the reader. To recover from this state,
send PC_to_RDR_IccPowerOff command to reset the card and try
again.
*/
rc = send_power_off (handle);
if (rc)
return rc;
statusbits = 1;
goto again;
}
else if (CCID_COMMAND_FAILED (msg))
return CCID_DRIVER_ERR_CARD_IO_ERROR;
handle->powered_off = 0;
if (atr)
{
size_t n = msglen - 10;
if (n > maxatrlen)
n = maxatrlen;
memcpy (atr, msg+10, n);
*atrlen = n;
}
param[6] = handle->nonnull_nad? ((1 << 4) | 0): 0;
rc = update_param_by_atr (param, msg+10, msglen - 10);
if (rc < 0)
{
DEBUGOUT_1 ("update_param_by_atr failed: %d\n", rc);
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
got_param = 0;
if (handle->auto_param)
{
msg[0] = PC_to_RDR_GetParameters;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
msg[7] = 0; /* RFU */
msg[8] = 0; /* RFU */
msg[9] = 0; /* RFU */
set_msg_len (msg, 0);
msglen = 10;
rc = bulk_out (handle, msg, msglen, 0);
if (!rc)
rc = bulk_in (handle, msg, sizeof msg, &msglen, RDR_to_PC_Parameters,
seqno, 2000, 0);
if (rc)
DEBUGOUT ("GetParameters failed\n");
else if (msglen == 17 && msg[9] == 1)
got_param = 1;
}
else if (handle->auto_pps)
;
else if (rc == 1) /* It's negotiable, send PPS. */
{
msg[0] = PC_to_RDR_XfrBlock;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
msg[7] = 0;
msg[8] = 0;
msg[9] = 0;
msg[10] = 0xff; /* PPSS */
msg[11] = 0x11; /* PPS0: PPS1, Protocol T=1 */
msg[12] = param[0]; /* PPS1: Fi / Di */
msg[13] = 0xff ^ 0x11 ^ param[0]; /* PCK */
set_msg_len (msg, 4);
msglen = 10 + 4;
rc = bulk_out (handle, msg, msglen, 0);
if (rc)
return rc;
rc = bulk_in (handle, msg, sizeof msg, &msglen, RDR_to_PC_DataBlock,
seqno, 5000, 0);
if (rc)
return rc;
if (msglen != 10 + 4)
{
DEBUGOUT_1 ("Setting PPS failed: %zu\n", msglen);
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
if (msg[10] != 0xff || msg[11] != 0x11 || msg[12] != param[0])
{
DEBUGOUT_1 ("Setting PPS failed: 0x%02x\n", param[0]);
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
}
/* Setup parameters to select T=1. */
msg[0] = PC_to_RDR_SetParameters;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
msg[7] = 1; /* Select T=1. */
msg[8] = 0; /* RFU */
msg[9] = 0; /* RFU */
if (!got_param)
memcpy (&msg[10], param, 7);
set_msg_len (msg, 7);
msglen = 10 + 7;
rc = bulk_out (handle, msg, msglen, 0);
if (rc)
return rc;
rc = bulk_in (handle, msg, sizeof msg, &msglen, RDR_to_PC_Parameters,
seqno, 5000, 0);
if (rc)
DEBUGOUT ("SetParameters failed (ignored)\n");
if (!rc && msglen > 15 && msg[15] >= 16 && msg[15] <= 254 )
handle->ifsc = msg[15];
else
handle->ifsc = 128; /* Something went wrong, assume 128 bytes. */
if (handle->nonnull_nad && msglen > 16 && msg[16] == 0)
{
DEBUGOUT ("Use Null-NAD, clearing handle->nonnull_nad.\n");
handle->nonnull_nad = 0;
}
handle->t1_ns = 0;
handle->t1_nr = 0;
/* Send an S-Block with our maximum IFSD to the CCID. */
if (!handle->apdu_level && !handle->auto_ifsd)
{
tpdu = msg+10;
/* NAD: DAD=1, SAD=0 */
tpdu[0] = handle->nonnull_nad? ((1 << 4) | 0): 0;
tpdu[1] = (0xc0 | 0 | 1); /* S-block request: change IFSD */
tpdu[2] = 1;
tpdu[3] = handle->max_ifsd? handle->max_ifsd : 32;
tpdulen = 4;
edc = compute_edc (tpdu, tpdulen, use_crc);
if (use_crc)
tpdu[tpdulen++] = (edc >> 8);
tpdu[tpdulen++] = edc;
msg[0] = PC_to_RDR_XfrBlock;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
msg[7] = 0;
msg[8] = 0; /* RFU */
msg[9] = 0; /* RFU */
set_msg_len (msg, tpdulen);
msglen = 10 + tpdulen;
if (debug_level > 1)
DEBUGOUT_3 ("T=1: put %c-block seq=%d%s\n",
((msg[11] & 0xc0) == 0x80)? 'R' :
(msg[11] & 0x80)? 'S' : 'I',
((msg[11] & 0x80)? !!(msg[11]& 0x10)
: !!(msg[11] & 0x40)),
(!(msg[11] & 0x80) && (msg[11] & 0x20)? " [more]":""));
rc = bulk_out (handle, msg, msglen, 0);
if (rc)
return rc;
rc = bulk_in (handle, msg, sizeof msg, &msglen,
RDR_to_PC_DataBlock, seqno, 5000, 0);
if (rc)
return rc;
tpdu = msg + 10;
tpdulen = msglen - 10;
if (tpdulen < 4)
return CCID_DRIVER_ERR_ABORTED;
if (debug_level > 1)
DEBUGOUT_4 ("T=1: got %c-block seq=%d err=%d%s\n",
((msg[11] & 0xc0) == 0x80)? 'R' :
(msg[11] & 0x80)? 'S' : 'I',
((msg[11] & 0x80)? !!(msg[11]& 0x10)
: !!(msg[11] & 0x40)),
((msg[11] & 0xc0) == 0x80)? (msg[11] & 0x0f) : 0,
(!(msg[11] & 0x80) && (msg[11] & 0x20)? " [more]":""));
if ((tpdu[1] & 0xe0) != 0xe0 || tpdu[2] != 1)
{
DEBUGOUT ("invalid response for S-block (Change-IFSD)\n");
return -1;
}
DEBUGOUT_1 ("IFSD has been set to %d\n", tpdu[3]);
}
ccid_vendor_specific_setup (handle);
return 0;
}
static unsigned int
compute_edc (const unsigned char *data, size_t datalen, int use_crc)
{
if (use_crc)
{
return 0x42; /* Not yet implemented. */
}
else
{
unsigned char crc = 0;
for (; datalen; datalen--)
crc ^= *data++;
return crc;
}
}
/* Return true if APDU is an extended length one. */
static int
is_exlen_apdu (const unsigned char *apdu, size_t apdulen)
{
if (apdulen < 7 || apdu[4])
return 0; /* Too short or no Z byte. */
return 1;
}
/* Helper for ccid_transceive used for APDU level exchanges. */
static int
ccid_transceive_apdu_level (ccid_driver_t handle,
const unsigned char *apdu_buf, size_t apdu_len,
unsigned char *resp, size_t maxresplen,
size_t *nresp)
{
int rc;
unsigned char msg[CCID_MAX_BUF];
const unsigned char *apdu_p;
size_t apdu_part_len;
size_t msglen;
unsigned char seqno;
int bwi = 0;
unsigned char chain = 0;
if (apdu_len == 0 || apdu_len > sizeof (msg) - 10)
return CCID_DRIVER_ERR_INV_VALUE; /* Invalid length. */
apdu_p = apdu_buf;
while (1)
{
apdu_part_len = apdu_len;
if (apdu_part_len > handle->max_ccid_msglen - 10)
{
apdu_part_len = handle->max_ccid_msglen - 10;
chain |= 0x01;
}
msg[0] = PC_to_RDR_XfrBlock;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
msg[7] = bwi;
msg[8] = chain;
msg[9] = 0;
memcpy (msg+10, apdu_p, apdu_part_len);
set_msg_len (msg, apdu_part_len);
msglen = 10 + apdu_part_len;
rc = bulk_out (handle, msg, msglen, 0);
if (rc)
return rc;
apdu_p += apdu_part_len;
apdu_len -= apdu_part_len;
rc = bulk_in (handle, msg, sizeof msg, &msglen,
RDR_to_PC_DataBlock, seqno, CCID_CMD_TIMEOUT, 0);
if (rc)
return rc;
if (!(chain & 0x01))
break;
chain = 0x02;
}
apdu_len = 0;
while (1)
{
apdu_part_len = msglen - 10;
if (resp && apdu_len + apdu_part_len <= maxresplen)
memcpy (resp + apdu_len, msg+10, apdu_part_len);
apdu_len += apdu_part_len;
if (!(msg[9] & 0x01))
break;
msg[0] = PC_to_RDR_XfrBlock;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
msg[7] = bwi;
msg[8] = 0x10; /* Request next data block */
msg[9] = 0;
set_msg_len (msg, 0);
msglen = 10;
rc = bulk_out (handle, msg, msglen, 0);
if (rc)
return rc;
rc = bulk_in (handle, msg, sizeof msg, &msglen,
RDR_to_PC_DataBlock, seqno, CCID_CMD_TIMEOUT, 0);
if (rc)
return rc;
}
if (resp)
{
if (apdu_len > maxresplen)
{
DEBUGOUT_2 ("provided buffer too short for received data "
"(%u/%u)\n",
(unsigned int)apdu_len, (unsigned int)maxresplen);
return CCID_DRIVER_ERR_INV_VALUE;
}
*nresp = apdu_len;
}
return 0;
}
/*
Protocol T=1 overview
Block Structure:
Prologue Field:
1 byte Node Address (NAD)
1 byte Protocol Control Byte (PCB)
1 byte Length (LEN)
Information Field:
0-254 byte APDU or Control Information (INF)
Epilogue Field:
1 byte Error Detection Code (EDC)
NAD:
bit 7 unused
bit 4..6 Destination Node Address (DAD)
bit 3 unused
bit 2..0 Source Node Address (SAD)
If node addresses are not used, SAD and DAD should be set to 0 on
the first block sent to the card. If they are used they should
have different values (0 for one is okay); that first block sets up
the addresses of the nodes.
PCB:
Information Block (I-Block):
bit 7 0
bit 6 Sequence number (yep, that is modulo 2)
bit 5 Chaining flag
bit 4..0 reserved
Received-Ready Block (R-Block):
bit 7 1
bit 6 0
bit 5 0
bit 4 Sequence number
bit 3..0 0 = no error
1 = EDC or parity error
2 = other error
other values are reserved
Supervisory Block (S-Block):
bit 7 1
bit 6 1
bit 5 clear=request,set=response
bit 4..0 0 = resynchronization request
1 = information field size request
2 = abort request
3 = extension of BWT request
4 = VPP error
other values are reserved
*/
int
ccid_transceive (ccid_driver_t handle,
const unsigned char *apdu_buf, size_t apdu_buflen,
unsigned char *resp, size_t maxresplen, size_t *nresp)
{
int rc;
/* The size of the buffer used to be 10+259. For the via_escape
hack we need one extra byte, thus 11+259. */
unsigned char send_buffer[11+259], recv_buffer[11+259];
const unsigned char *apdu;
size_t apdulen;
unsigned char *msg, *tpdu, *p;
size_t msglen, tpdulen, last_tpdulen, n;
unsigned char seqno;
unsigned int edc;
int use_crc = 0;
int hdrlen, pcboff;
size_t dummy_nresp;
int via_escape = 0;
int next_chunk = 1;
int sending = 1;
int retries = 0;
int resyncing = 0;
int nad_byte;
int wait_more = 0;
if (!nresp)
nresp = &dummy_nresp;
*nresp = 0;
/* Smarter readers allow sending APDUs directly; divert here. */
if (handle->apdu_level)
{
/* We employ a hack for Omnikey readers which are able to send
TPDUs using an escape sequence. There is no documentation
but the Windows driver does it this way. Tested using a
CM6121. This method works also for the Cherry XX44
keyboards; however there are problems with the
ccid_transceive_secure which leads to a loss of sync on the
CCID level. If Cherry wants to make their keyboard work
again, they should hand over some docs. */
if ((handle->id_vendor == VENDOR_OMNIKEY)
&& handle->apdu_level < 2
&& is_exlen_apdu (apdu_buf, apdu_buflen))
via_escape = 1;
else
return ccid_transceive_apdu_level (handle, apdu_buf, apdu_buflen,
resp, maxresplen, nresp);
}
/* The other readers we support require sending TPDUs. */
tpdulen = 0; /* Avoid compiler warning about no initialization. */
msg = send_buffer;
hdrlen = via_escape? 11 : 10;
/* NAD: DAD=1, SAD=0 */
nad_byte = handle->nonnull_nad? ((1 << 4) | 0): 0;
if (via_escape)
nad_byte = 0;
last_tpdulen = 0; /* Avoid gcc warning (controlled by RESYNCING). */
for (;;)
{
if (next_chunk)
{
next_chunk = 0;
apdu = apdu_buf;
apdulen = apdu_buflen;
log_assert (apdulen);
/* Construct an I-Block. */
tpdu = msg + hdrlen;
tpdu[0] = nad_byte;
tpdu[1] = ((handle->t1_ns & 1) << 6); /* I-block */
if (apdulen > handle->ifsc )
{
apdulen = handle->ifsc;
apdu_buf += handle->ifsc;
apdu_buflen -= handle->ifsc;
tpdu[1] |= (1 << 5); /* Set more bit. */
}
tpdu[2] = apdulen;
memcpy (tpdu+3, apdu, apdulen);
tpdulen = 3 + apdulen;
edc = compute_edc (tpdu, tpdulen, use_crc);
if (use_crc)
tpdu[tpdulen++] = (edc >> 8);
tpdu[tpdulen++] = edc;
}
if (via_escape)
{
msg[0] = PC_to_RDR_Escape;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
msg[7] = 0; /* RFU */
msg[8] = 0; /* RFU */
msg[9] = 0; /* RFU */
msg[10] = 0x1a; /* Omnikey command to send a TPDU. */
set_msg_len (msg, 1 + tpdulen);
}
else
{
msg[0] = PC_to_RDR_XfrBlock;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
msg[7] = wait_more; /* bBWI */
msg[8] = 0; /* RFU */
msg[9] = 0; /* RFU */
set_msg_len (msg, tpdulen);
}
msglen = hdrlen + tpdulen;
if (!resyncing)
last_tpdulen = tpdulen;
pcboff = hdrlen+1;
if (debug_level > 1)
DEBUGOUT_3 ("T=1: put %c-block seq=%d%s\n",
((msg[pcboff] & 0xc0) == 0x80)? 'R' :
(msg[pcboff] & 0x80)? 'S' : 'I',
((msg[pcboff] & 0x80)? !!(msg[pcboff]& 0x10)
: !!(msg[pcboff] & 0x40)),
(!(msg[pcboff] & 0x80) && (msg[pcboff] & 0x20)?
" [more]":""));
rc = bulk_out (handle, msg, msglen, 0);
if (rc)
return rc;
msg = recv_buffer;
rc = bulk_in (handle, msg, sizeof recv_buffer, &msglen,
via_escape? RDR_to_PC_Escape : RDR_to_PC_DataBlock, seqno,
(wait_more ? wait_more : 1) * CCID_CMD_TIMEOUT, 0);
if (rc)
return rc;
tpdu = msg + hdrlen;
tpdulen = msglen - hdrlen;
resyncing = 0;
if (tpdulen < 4)
{
#ifdef USE_NPTH
npth_unprotect ();
#endif
libusb_clear_halt (handle->idev, handle->ep_bulk_in);
#ifdef USE_NPTH
npth_protect ();
#endif
return CCID_DRIVER_ERR_ABORTED;
}
if (debug_level > 1)
DEBUGOUT_4 ("T=1: got %c-block seq=%d err=%d%s\n",
((msg[pcboff] & 0xc0) == 0x80)? 'R' :
(msg[pcboff] & 0x80)? 'S' : 'I',
((msg[pcboff] & 0x80)? !!(msg[pcboff]& 0x10)
: !!(msg[pcboff] & 0x40)),
((msg[pcboff] & 0xc0) == 0x80)? (msg[pcboff] & 0x0f) : 0,
(!(msg[pcboff] & 0x80) && (msg[pcboff] & 0x20)?
" [more]":""));
wait_more = 0;
if (!(tpdu[1] & 0x80))
{ /* This is an I-block. */
retries = 0;
if (sending)
{ /* last block sent was successful. */
handle->t1_ns ^= 1;
sending = 0;
}
if (!!(tpdu[1] & 0x40) != handle->t1_nr)
{ /* Response does not match our sequence number. */
msg = send_buffer;
tpdu = msg + hdrlen;
tpdu[0] = nad_byte;
tpdu[1] = (0x80 | (handle->t1_nr & 1) << 4 | 2); /* R-block */
tpdu[2] = 0;
tpdulen = 3;
edc = compute_edc (tpdu, tpdulen, use_crc);
if (use_crc)
tpdu[tpdulen++] = (edc >> 8);
tpdu[tpdulen++] = edc;
continue;
}
handle->t1_nr ^= 1;
p = tpdu + 3; /* Skip the prologue field. */
n = tpdulen - 3 - 1; /* Strip the epilogue field. */
/* fixme: verify the checksum. */
if (resp)
{
if (n > maxresplen)
{
DEBUGOUT_2 ("provided buffer too short for received data "
"(%u/%u)\n",
(unsigned int)n, (unsigned int)maxresplen);
return CCID_DRIVER_ERR_INV_VALUE;
}
memcpy (resp, p, n);
resp += n;
*nresp += n;
maxresplen -= n;
}
if (!(tpdu[1] & 0x20))
return 0; /* No chaining requested - ready. */
msg = send_buffer;
tpdu = msg + hdrlen;
tpdu[0] = nad_byte;
tpdu[1] = (0x80 | (handle->t1_nr & 1) << 4); /* R-block */
tpdu[2] = 0;
tpdulen = 3;
edc = compute_edc (tpdu, tpdulen, use_crc);
if (use_crc)
tpdu[tpdulen++] = (edc >> 8);
tpdu[tpdulen++] = edc;
}
else if ((tpdu[1] & 0xc0) == 0x80)
{ /* This is a R-block. */
if ( (tpdu[1] & 0x0f))
{
retries++;
if (via_escape && retries == 1 && (msg[pcboff] & 0x0f))
{
/* Error probably due to switching to TPDU. Send a
resync request. We use the recv_buffer so that
we don't corrupt the send_buffer. */
msg = recv_buffer;
tpdu = msg + hdrlen;
tpdu[0] = nad_byte;
tpdu[1] = 0xc0; /* S-block resync request. */
tpdu[2] = 0;
tpdulen = 3;
edc = compute_edc (tpdu, tpdulen, use_crc);
if (use_crc)
tpdu[tpdulen++] = (edc >> 8);
tpdu[tpdulen++] = edc;
resyncing = 1;
DEBUGOUT ("T=1: requesting resync\n");
}
else if (retries > 3)
{
DEBUGOUT ("T=1: 3 failed retries\n");
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
else
{
/* Error: repeat last block */
msg = send_buffer;
tpdulen = last_tpdulen;
}
}
else if (sending && !!(tpdu[1] & 0x10) == handle->t1_ns)
{ /* Response does not match our sequence number. */
DEBUGOUT ("R-block with wrong seqno received on more bit\n");
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
else if (sending)
{ /* Send next chunk. */
retries = 0;
msg = send_buffer;
next_chunk = 1;
handle->t1_ns ^= 1;
}
else
{
DEBUGOUT ("unexpected ACK R-block received\n");
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
}
else
{ /* This is a S-block. */
retries = 0;
DEBUGOUT_2 ("T=1: S-block %s received cmd=%d\n",
(tpdu[1] & 0x20)? "response": "request",
(tpdu[1] & 0x1f));
if ( !(tpdu[1] & 0x20) && (tpdu[1] & 0x1f) == 1 && tpdu[2] == 1)
{
/* Information field size request. */
unsigned char ifsc = tpdu[3];
if (ifsc < 16 || ifsc > 254)
return CCID_DRIVER_ERR_CARD_IO_ERROR;
msg = send_buffer;
tpdu = msg + hdrlen;
tpdu[0] = nad_byte;
tpdu[1] = (0xc0 | 0x20 | 1); /* S-block response */
tpdu[2] = 1;
tpdu[3] = ifsc;
tpdulen = 4;
edc = compute_edc (tpdu, tpdulen, use_crc);
if (use_crc)
tpdu[tpdulen++] = (edc >> 8);
tpdu[tpdulen++] = edc;
DEBUGOUT_1 ("T=1: requesting an ifsc=%d\n", ifsc);
}
else if ( !(tpdu[1] & 0x20) && (tpdu[1] & 0x1f) == 3 && tpdu[2])
{
/* Wait time extension request. */
unsigned char bwi = tpdu[3];
wait_more = bwi;
msg = send_buffer;
tpdu = msg + hdrlen;
tpdu[0] = nad_byte;
tpdu[1] = (0xc0 | 0x20 | 3); /* S-block response */
tpdu[2] = 1;
tpdu[3] = bwi;
tpdulen = 4;
edc = compute_edc (tpdu, tpdulen, use_crc);
if (use_crc)
tpdu[tpdulen++] = (edc >> 8);
tpdu[tpdulen++] = edc;
DEBUGOUT_1 ("T=1: waittime extension of bwi=%d\n", bwi);
print_progress (handle);
}
else if ( (tpdu[1] & 0x20) && (tpdu[1] & 0x1f) == 0 && !tpdu[2])
{
DEBUGOUT ("T=1: resync ack from reader\n");
/* Repeat previous block. */
msg = send_buffer;
tpdulen = last_tpdulen;
}
else
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
} /* end T=1 protocol loop. */
return 0;
}
/* Send the CCID Secure command to the reader. APDU_BUF should
contain the APDU template. PIN_MODE defines how the pin gets
formatted:
1 := The PIN is ASCII encoded and of variable length. The
length of the PIN entered will be put into Lc by the reader.
The APDU should me made up of 4 bytes without Lc.
PINLEN_MIN and PINLEN_MAX define the limits for the pin length. 0
may be used t enable reasonable defaults.
When called with RESP and NRESP set to NULL, the function will
merely check whether the reader supports the secure command for the
given APDU and PIN_MODE. */
int
ccid_transceive_secure (ccid_driver_t handle,
const unsigned char *apdu_buf, size_t apdu_buflen,
pininfo_t *pininfo,
unsigned char *resp, size_t maxresplen, size_t *nresp)
{
int rc;
unsigned char send_buffer[10+259], recv_buffer[10+259];
unsigned char *msg, *tpdu, *p;
size_t msglen, tpdulen, n;
unsigned char seqno;
size_t dummy_nresp;
int testmode;
int cherry_mode = 0;
int add_zero = 0;
int enable_varlen = 0;
testmode = !resp && !nresp;
if (!nresp)
nresp = &dummy_nresp;
*nresp = 0;
if (apdu_buflen >= 4 && apdu_buf[1] == 0x20 && (handle->has_pinpad & 1))
;
else if (apdu_buflen >= 4 && apdu_buf[1] == 0x24 && (handle->has_pinpad & 2))
;
else
return CCID_DRIVER_ERR_NO_PINPAD;
if (!pininfo->minlen)
pininfo->minlen = 1;
if (!pininfo->maxlen)
pininfo->maxlen = 15;
/* Note that the 25 is the maximum value the SPR532 allows. */
if (pininfo->minlen < 1 || pininfo->minlen > 25
|| pininfo->maxlen < 1 || pininfo->maxlen > 25
|| pininfo->minlen > pininfo->maxlen)
return CCID_DRIVER_ERR_INV_VALUE;
/* We have only tested a few readers so better don't risk anything
and do not allow the use with other readers. */
switch (handle->id_vendor)
{
case VENDOR_SCM: /* Tested with SPR 532. */
case VENDOR_KAAN: /* Tested with KAAN Advanced (1.02). */
case VENDOR_FSIJ: /* Tested with Gnuk (0.21). */
pininfo->maxlen = 25;
enable_varlen = 1;
break;
case VENDOR_REINER:/* Tested with cyberJack go */
case VENDOR_VASCO: /* Tested with DIGIPASS 920 */
enable_varlen = 1;
break;
case VENDOR_CHERRY:
pininfo->maxlen = 15;
enable_varlen = 1;
/* The CHERRY XX44 keyboard echos an asterisk for each entered
character on the keyboard channel. We use a special variant
of PC_to_RDR_Secure which directs these characters to the
smart card's bulk-in channel. We also need to append a zero
Lc byte to the APDU. It seems that it will be replaced with
the actual length instead of being appended before the APDU
is send to the card. */
add_zero = 1;
if (handle->id_product != CHERRY_ST2000)
cherry_mode = 1;
break;
case VENDOR_NXP:
if (handle->id_product == CRYPTOUCAN)
{
pininfo->maxlen = 25;
enable_varlen = 1;
break;
}
return CCID_DRIVER_ERR_NOT_SUPPORTED;
case VENDOR_GEMPC:
if (handle->id_product == GEMPC_PINPAD)
{
enable_varlen = 0;
pininfo->minlen = 4;
pininfo->maxlen = 8;
break;
}
else if (handle->id_product == GEMPC_EZIO)
{
pininfo->maxlen = 25;
enable_varlen = 1;
break;
}
return CCID_DRIVER_ERR_NOT_SUPPORTED;
default:
if ((handle->id_vendor == VENDOR_VEGA &&
handle->id_product == VEGA_ALPHA))
{
enable_varlen = 0;
pininfo->minlen = 4;
pininfo->maxlen = 8;
break;
}
return CCID_DRIVER_ERR_NOT_SUPPORTED;
}
if (enable_varlen)
pininfo->fixedlen = 0;
if (testmode)
return 0; /* Success */
if (pininfo->fixedlen < 0 || pininfo->fixedlen >= 16)
return CCID_DRIVER_ERR_NOT_SUPPORTED;
ccid_vendor_specific_pinpad_setup (handle);
msg = send_buffer;
msg[0] = cherry_mode? 0x89 : PC_to_RDR_Secure;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
msg[7] = 0; /* bBWI */
msg[8] = 0; /* RFU */
msg[9] = 0; /* RFU */
msg[10] = apdu_buf[1] == 0x20 ? 0 : 1;
/* Perform PIN verification or PIN modification. */
msg[11] = 0; /* Timeout in seconds. */
msg[12] = 0x82; /* bmFormatString: Byte, pos=0, left, ASCII. */
if (handle->id_vendor == VENDOR_SCM)
{
/* For the SPR532 the next 2 bytes need to be zero. We do this
for all SCM products. Kudos to Martin Paljak for this
hint. */
msg[13] = msg[14] = 0;
}
else
{
msg[13] = pininfo->fixedlen; /* bmPINBlockString:
0 bits of pin length to insert.
PIN block size by fixedlen. */
msg[14] = 0x00; /* bmPINLengthFormat:
Units are bytes, position is 0. */
}
msglen = 15;
if (apdu_buf[1] == 0x24)
{
msg[msglen++] = 0; /* bInsertionOffsetOld */
msg[msglen++] = pininfo->fixedlen; /* bInsertionOffsetNew */
}
/* The following is a little endian word. */
msg[msglen++] = pininfo->maxlen; /* wPINMaxExtraDigit-Maximum. */
msg[msglen++] = pininfo->minlen; /* wPINMaxExtraDigit-Minimum. */
if (apdu_buf[1] == 0x24)
msg[msglen++] = apdu_buf[2] == 0 ? 0x03 : 0x01;
/* bConfirmPIN
* 0x00: new PIN once
* 0x01: new PIN twice (confirmation)
* 0x02: old PIN and new PIN once
* 0x03: old PIN and new PIN twice (confirmation)
*/
msg[msglen] = 0x02; /* bEntryValidationCondition:
Validation key pressed */
if (pininfo->minlen && pininfo->maxlen && pininfo->minlen == pininfo->maxlen)
msg[msglen] |= 0x01; /* Max size reached. */
msglen++;
if (apdu_buf[1] == 0x20)
msg[msglen++] = 0x01; /* bNumberMessage. */
else
msg[msglen++] = 0x03; /* bNumberMessage. */
msg[msglen++] = 0x09; /* wLangId-Low: English FIXME: use the first entry. */
msg[msglen++] = 0x04; /* wLangId-High. */
if (apdu_buf[1] == 0x20)
msg[msglen++] = 0; /* bMsgIndex. */
else
{
msg[msglen++] = 0; /* bMsgIndex1. */
msg[msglen++] = 1; /* bMsgIndex2. */
msg[msglen++] = 2; /* bMsgIndex3. */
}
/* Calculate Lc. */
n = pininfo->fixedlen;
if (apdu_buf[1] == 0x24)
n += pininfo->fixedlen;
/* bTeoProlog follows: */
msg[msglen++] = handle->nonnull_nad? ((1 << 4) | 0): 0;
msg[msglen++] = ((handle->t1_ns & 1) << 6); /* I-block */
if (n)
msg[msglen++] = n + 5; /* apdulen should be filled for fixed length. */
else
msg[msglen++] = 0; /* The apdulen will be filled in by the reader. */
/* APDU follows: */
msg[msglen++] = apdu_buf[0]; /* CLA */
msg[msglen++] = apdu_buf[1]; /* INS */
msg[msglen++] = apdu_buf[2]; /* P1 */
msg[msglen++] = apdu_buf[3]; /* P2 */
if (add_zero)
msg[msglen++] = 0;
else if (pininfo->fixedlen != 0)
{
msg[msglen++] = n;
memset (&msg[msglen], 0xff, n);
msglen += n;
}
/* An EDC is not required. */
set_msg_len (msg, msglen - 10);
rc = bulk_out (handle, msg, msglen, 0);
if (rc)
return rc;
msg = recv_buffer;
rc = bulk_in (handle, msg, sizeof recv_buffer, &msglen,
RDR_to_PC_DataBlock, seqno, 30000, 0);
if (rc)
return rc;
tpdu = msg + 10;
tpdulen = msglen - 10;
if (handle->apdu_level)
{
if (resp)
{
if (tpdulen > maxresplen)
{
DEBUGOUT_2 ("provided buffer too short for received data "
"(%u/%u)\n",
(unsigned int)tpdulen, (unsigned int)maxresplen);
return CCID_DRIVER_ERR_INV_VALUE;
}
memcpy (resp, tpdu, tpdulen);
*nresp = tpdulen;
}
return 0;
}
if (tpdulen < 4)
{
#ifdef USE_NPTH
npth_unprotect ();
#endif
libusb_clear_halt (handle->idev, handle->ep_bulk_in);
#ifdef USE_NPTH
npth_protect ();
#endif
return CCID_DRIVER_ERR_ABORTED;
}
if (debug_level > 1)
DEBUGOUT_4 ("T=1: got %c-block seq=%d err=%d%s\n",
((msg[11] & 0xc0) == 0x80)? 'R' :
(msg[11] & 0x80)? 'S' : 'I',
((msg[11] & 0x80)? !!(msg[11]& 0x10) : !!(msg[11] & 0x40)),
((msg[11] & 0xc0) == 0x80)? (msg[11] & 0x0f) : 0,
(!(msg[11] & 0x80) && (msg[11] & 0x20)? " [more]":""));
if (!(tpdu[1] & 0x80))
{ /* This is an I-block. */
/* Last block sent was successful. */
handle->t1_ns ^= 1;
if (!!(tpdu[1] & 0x40) != handle->t1_nr)
{ /* Response does not match our sequence number. */
DEBUGOUT ("I-block with wrong seqno received\n");
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
handle->t1_nr ^= 1;
p = tpdu + 3; /* Skip the prologue field. */
n = tpdulen - 3 - 1; /* Strip the epilogue field. */
/* fixme: verify the checksum. */
if (resp)
{
if (n > maxresplen)
{
DEBUGOUT_2 ("provided buffer too short for received data "
"(%u/%u)\n",
(unsigned int)n, (unsigned int)maxresplen);
return CCID_DRIVER_ERR_INV_VALUE;
}
memcpy (resp, p, n);
*nresp += n;
}
if (!(tpdu[1] & 0x20))
return 0; /* No chaining requested - ready. */
DEBUGOUT ("chaining requested but not supported for Secure operation\n");
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
else if ((tpdu[1] & 0xc0) == 0x80)
{ /* This is a R-block. */
if ( (tpdu[1] & 0x0f))
{ /* Error: repeat last block */
DEBUGOUT ("No retries supported for Secure operation\n");
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
else if (!!(tpdu[1] & 0x10) == handle->t1_ns)
{ /* Response does not match our sequence number. */
DEBUGOUT ("R-block with wrong seqno received on more bit\n");
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
else
{ /* Send next chunk. */
DEBUGOUT ("chaining not supported on Secure operation\n");
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
}
else
{ /* This is a S-block. */
DEBUGOUT_2 ("T=1: S-block %s received cmd=%d for Secure operation\n",
(tpdu[1] & 0x20)? "response": "request",
(tpdu[1] & 0x1f));
return CCID_DRIVER_ERR_CARD_IO_ERROR;
}
return 0;
}
#ifdef TEST
static void
print_error (int err)
{
const char *p;
char buf[50];
switch (err)
{
case 0: p = "success"; break;
case CCID_DRIVER_ERR_OUT_OF_CORE: p = "out of core"; break;
case CCID_DRIVER_ERR_INV_VALUE: p = "invalid value"; break;
case CCID_DRIVER_ERR_NO_DRIVER: p = "no driver"; break;
case CCID_DRIVER_ERR_NOT_SUPPORTED: p = "not supported"; break;
case CCID_DRIVER_ERR_LOCKING_FAILED: p = "locking failed"; break;
case CCID_DRIVER_ERR_BUSY: p = "busy"; break;
case CCID_DRIVER_ERR_NO_CARD: p = "no card"; break;
case CCID_DRIVER_ERR_CARD_INACTIVE: p = "card inactive"; break;
case CCID_DRIVER_ERR_CARD_IO_ERROR: p = "card I/O error"; break;
case CCID_DRIVER_ERR_GENERAL_ERROR: p = "general error"; break;
case CCID_DRIVER_ERR_NO_READER: p = "no reader"; break;
case CCID_DRIVER_ERR_ABORTED: p = "aborted"; break;
default: sprintf (buf, "0x%05x", err); p = buf; break;
}
fprintf (stderr, "operation failed: %s\n", p);
}
static void
print_data (const unsigned char *data, size_t length)
{
if (length >= 2)
{
fprintf (stderr, "operation status: %02X%02X\n",
data[length-2], data[length-1]);
length -= 2;
}
if (length)
{
fputs (" returned data:", stderr);
for (; length; length--, data++)
fprintf (stderr, " %02X", *data);
putc ('\n', stderr);
}
}
static void
print_result (int rc, const unsigned char *data, size_t length)
{
if (rc)
print_error (rc);
else if (data)
print_data (data, length);
}
int
main (int argc, char **argv)
{
gpg_error_t err;
ccid_driver_t ccid;
int slotstat;
unsigned char result[512];
size_t resultlen;
int no_pinpad = 0;
int verify_123456 = 0;
int did_verify = 0;
int no_poll = 0;
int idx_max;
struct ccid_dev_table *ccid_table;
if (argc)
{
argc--;
argv++;
}
while (argc)
{
if ( !strcmp (*argv, "--list"))
{
char *p;
p = ccid_get_reader_list ();
if (!p)
return 1;
fputs (p, stderr);
free (p);
return 0;
}
else if ( !strcmp (*argv, "--debug"))
{
ccid_set_debug_level (ccid_set_debug_level (-1)+1);
argc--; argv++;
}
else if ( !strcmp (*argv, "--no-poll"))
{
no_poll = 1;
argc--; argv++;
}
else if ( !strcmp (*argv, "--no-pinpad"))
{
no_pinpad = 1;
argc--; argv++;
}
else if ( !strcmp (*argv, "--verify-123456"))
{
verify_123456 = 1;
argc--; argv++;
}
else
break;
}
err = ccid_dev_scan (&idx_max, &ccid_table);
if (err)
return 1;
if (idx_max == 0)
return 1;
err = ccid_open_reader (argc? *argv:NULL, 0, ccid_table, &ccid, NULL);
if (err)
return 1;
ccid_dev_scan_finish (ccid_table, idx_max);
if (!no_poll)
ccid_poll (ccid);
fputs ("getting ATR ...\n", stderr);
err = ccid_get_atr (ccid, NULL, 0, NULL);
if (err)
{
print_error (err);
return 1;
}
if (!no_poll)
ccid_poll (ccid);
fputs ("getting slot status ...\n", stderr);
err = ccid_slot_status (ccid, &slotstat, 1);
if (err)
{
print_error (err);
return 1;
}
if (!no_poll)
ccid_poll (ccid);
fputs ("selecting application OpenPGP ....\n", stderr);
{
static unsigned char apdu[] = {
0, 0xA4, 4, 0, 6, 0xD2, 0x76, 0x00, 0x01, 0x24, 0x01};
err = ccid_transceive (ccid,
apdu, sizeof apdu,
result, sizeof result, &resultlen);
print_result (err, result, resultlen);
}
if (!no_poll)
ccid_poll (ccid);
fputs ("getting OpenPGP DO 0x65 ....\n", stderr);
{
static unsigned char apdu[] = { 0, 0xCA, 0, 0x65, 254 };
err = ccid_transceive (ccid, apdu, sizeof apdu,
result, sizeof result, &resultlen);
print_result (err, result, resultlen);
}
if (!no_pinpad)
{
}
if (!no_pinpad)
{
static unsigned char apdu[] = { 0, 0x20, 0, 0x81 };
pininfo_t pininfo = { 0, 0, 0 };
if (ccid_transceive_secure (ccid, apdu, sizeof apdu, &pininfo,
NULL, 0, NULL))
fputs ("can't verify using a PIN-Pad reader\n", stderr);
else
{
fputs ("verifying CHV1 using the PINPad ....\n", stderr);
err = ccid_transceive_secure (ccid, apdu, sizeof apdu, &pininfo,
result, sizeof result, &resultlen);
print_result (err, result, resultlen);
did_verify = 1;
}
}
if (verify_123456 && !did_verify)
{
fputs ("verifying that CHV1 is 123456....\n", stderr);
{
static unsigned char apdu[] = {0, 0x20, 0, 0x81,
6, '1','2','3','4','5','6'};
err = ccid_transceive (ccid, apdu, sizeof apdu,
result, sizeof result, &resultlen);
print_result (err, result, resultlen);
}
}
if (!err)
{
fputs ("getting OpenPGP DO 0x5E ....\n", stderr);
{
static unsigned char apdu[] = { 0, 0xCA, 0, 0x5E, 254 };
err = ccid_transceive (ccid, apdu, sizeof apdu,
result, sizeof result, &resultlen);
print_result (err, result, resultlen);
}
}
ccid_close_reader (ccid);
return 0;
}
/*
* Disabled Local Variables:
* compile-command: "gcc -DTEST -DGPGRT_ENABLE_ES_MACROS -DHAVE_NPTH -DUSE_NPTH -Wall -I/usr/include/libusb-1.0 -I/usr/local/include -lusb-1.0 -g ccid-driver.c -lnpth -lgpg-error"
* End:
*/
#endif /*TEST*/
#endif /*HAVE_LIBUSB*/
diff --git a/scd/scdaemon.c b/scd/scdaemon.c
index ed7fdc03a..1a8705b18 100644
--- a/scd/scdaemon.c
+++ b/scd/scdaemon.c
@@ -1,1459 +1,1478 @@
/* scdaemon.c - The GnuPG Smartcard Daemon
* Copyright (C) 2001-2002, 2004-2005, 2007-2020 Free Software Foundation, Inc.
* Copyright (C) 2001-2002, 2004-2005, 2007-2019 Werner Koch
* Copyright (C) 2020 g10 Code GmbH
*
* This file is part of GnuPG.
*
* GnuPG is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* GnuPG is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <https://www.gnu.org/licenses/>.
* SPDX-License-Identifier: GPL-3.0-or-later
*/
#include <config.h>
#include <stdio.h>
#include <stdlib.h>
#include <stddef.h>
#include <stdarg.h>
#include <string.h>
#include <errno.h>
#include <time.h>
#include <fcntl.h>
#ifndef HAVE_W32_SYSTEM
#include <sys/socket.h>
#include <sys/un.h>
#endif /*HAVE_W32_SYSTEM*/
#include <unistd.h>
#include <signal.h>
#include <npth.h>
#define INCLUDED_BY_MAIN_MODULE 1
#define GNUPG_COMMON_NEED_AFLOCAL
#include "scdaemon.h"
#include <ksba.h>
#include <gcrypt.h>
#include <assuan.h> /* malloc hooks */
#include "../common/i18n.h"
#include "../common/sysutils.h"
#include "iso7816.h"
#include "apdu.h"
#include "ccid-driver.h"
#include "../common/gc-opt-flags.h"
#include "../common/asshelp.h"
#include "../common/exechelp.h"
#include "../common/comopt.h"
#include "../common/init.h"
#ifndef ENAMETOOLONG
# define ENAMETOOLONG EINVAL
#endif
enum cmd_and_opt_values
{ aNull = 0,
oCsh = 'c',
oQuiet = 'q',
oSh = 's',
oVerbose = 'v',
oNoVerbose = 500,
aGPGConfList,
aGPGConfTest,
oOptions,
oDebug,
oDebugAll,
oDebugLevel,
oDebugWait,
oDebugAllowCoreDump,
oDebugCCIDDriver,
oDebugLogTid,
oDebugAllowPINLogging,
oDebugAssuanLogCats,
oNoGreeting,
oNoOptions,
oHomedir,
oNoDetach,
oNoGrab,
oLogFile,
oServer,
oMultiServer,
oDaemon,
oBatch,
oReaderPort,
oCardTimeout,
octapiDriver,
opcscDriver,
opcscShared,
oDisableCCID,
oDisableOpenSC,
oDisablePinpad,
oAllowAdmin,
oDenyAdmin,
oDisableApplication,
oApplicationPriority,
oEnablePinpadVarlen,
+ oCompatibilityFlags,
oListenBacklog
};
static gpgrt_opt_t opts[] = {
ARGPARSE_c (aGPGConfList, "gpgconf-list", "@"),
ARGPARSE_c (aGPGConfTest, "gpgconf-test", "@"),
ARGPARSE_header (NULL, N_("Options used for startup")),
ARGPARSE_s_n (oServer,"server", N_("run in server mode (foreground)")),
ARGPARSE_s_n (oMultiServer, "multi-server",
N_("run in multi server mode (foreground)")),
ARGPARSE_s_n (oDaemon, "daemon", N_("run in daemon mode (background)")),
ARGPARSE_s_n (oNoDetach, "no-detach", N_("do not detach from the console")),
ARGPARSE_s_n (oSh, "sh", N_("sh-style command output")),
ARGPARSE_s_n (oCsh, "csh", N_("csh-style command output")),
ARGPARSE_s_s (oHomedir, "homedir", "@"),
ARGPARSE_conffile (oOptions, "options", N_("|FILE|read options from FILE")),
ARGPARSE_noconffile (oNoOptions, "no-options", "@"),
ARGPARSE_header ("Monitor", N_("Options controlling the diagnostic output")),
ARGPARSE_s_n (oVerbose, "verbose", N_("verbose")),
ARGPARSE_s_n (oQuiet, "quiet", N_("be somewhat more quiet")),
ARGPARSE_s_s (oDebug, "debug", "@"),
ARGPARSE_s_n (oDebugAll, "debug-all", "@"),
ARGPARSE_s_s (oDebugLevel, "debug-level" ,
N_("|LEVEL|set the debugging level to LEVEL")),
ARGPARSE_s_i (oDebugWait, "debug-wait", "@"),
ARGPARSE_s_n (oDebugAllowCoreDump, "debug-allow-core-dump", "@"),
ARGPARSE_s_n (oDebugCCIDDriver, "debug-ccid-driver", "@"),
ARGPARSE_s_n (oDebugLogTid, "debug-log-tid", "@"),
ARGPARSE_s_n (oDebugAllowPINLogging, "debug-allow-pin-logging", "@"),
ARGPARSE_p_u (oDebugAssuanLogCats, "debug-assuan-log-cats", "@"),
ARGPARSE_s_s (oLogFile, "log-file", N_("|FILE|write a log to FILE")),
ARGPARSE_header ("Configuration",
N_("Options controlling the configuration")),
ARGPARSE_s_s (oReaderPort, "reader-port",
N_("|N|connect to reader at port N")),
ARGPARSE_s_s (octapiDriver, "ctapi-driver",
N_("|NAME|use NAME as ct-API driver")),
ARGPARSE_s_s (opcscDriver, "pcsc-driver",
N_("|NAME|use NAME as PC/SC driver")),
ARGPARSE_s_n (opcscShared, "pcsc-shared", "@"),
ARGPARSE_s_n (oDisableCCID, "disable-ccid",
#ifdef HAVE_LIBUSB
N_("do not use the internal CCID driver")
#else
"@"
#endif
/* end --disable-ccid */),
ARGPARSE_s_u (oCardTimeout, "card-timeout",
N_("|N|disconnect the card after N seconds of inactivity")),
ARGPARSE_s_n (oDisablePinpad, "disable-pinpad",
N_("do not use a reader's pinpad")),
ARGPARSE_ignore (300, "disable-keypad"),
ARGPARSE_s_n (oEnablePinpadVarlen, "enable-pinpad-varlen",
N_("use variable length input for pinpad")),
ARGPARSE_s_s (oDisableApplication, "disable-application", "@"),
ARGPARSE_s_s (oApplicationPriority, "application-priority",
N_("|LIST|change the application priority to LIST")),
+ ARGPARSE_s_s (oCompatibilityFlags, "compatibility-flags", "@"),
ARGPARSE_s_i (oListenBacklog, "listen-backlog", "@"),
ARGPARSE_header("Security", N_("Options controlling the security")),
ARGPARSE_s_n (oAllowAdmin, "allow-admin", "@"),
ARGPARSE_s_n (oDenyAdmin, "deny-admin",
N_("deny the use of admin card commands")),
ARGPARSE_end ()
};
/* The list of supported debug flags. */
static struct debug_flags_s debug_flags [] =
{
{ DBG_MPI_VALUE , "mpi" },
{ DBG_CRYPTO_VALUE , "crypto" },
{ DBG_MEMORY_VALUE , "memory" },
{ DBG_CACHE_VALUE , "cache" },
{ DBG_MEMSTAT_VALUE, "memstat" },
{ DBG_HASHING_VALUE, "hashing" },
{ DBG_IPC_VALUE , "ipc" },
{ DBG_CARD_VALUE , "card" },
{ DBG_CARD_IO_VALUE, "cardio" },
{ DBG_READER_VALUE , "reader" },
{ DBG_APP_VALUE , "app" },
{ 0, NULL }
};
+/* The list of compatibility flags. */
+static struct compatibility_flags_s compatibility_flags [] =
+ {
+ { COMPAT_CCID_NO_AUTO_DETACH, "ccid-no-auto-detach" },
+ { 0, NULL }
+ };
+
+
/* The card driver we use by default for PC/SC. */
#if defined(HAVE_W32_SYSTEM) || defined(__CYGWIN__)
#define DEFAULT_PCSC_DRIVER "winscard.dll"
#elif defined(__APPLE__)
#define DEFAULT_PCSC_DRIVER "/System/Library/Frameworks/PCSC.framework/PCSC"
#elif defined(__GLIBC__)
#define DEFAULT_PCSC_DRIVER "libpcsclite.so.1"
#else
#define DEFAULT_PCSC_DRIVER "libpcsclite.so"
#endif
/* The timer tick used to check card removal.
We poll every 500ms to let the user immediately know a status
change.
For a card reader with an interrupt endpoint, this timer is not
used with the internal CCID driver.
This is not too good for power saving but given that there is no
easy way to block on card status changes it is the best we can do.
For PC/SC we could in theory use an extra thread to wait for status
changes but that requires a native thread because there is no way
to make the underlying PC/SC card change function block using a Npth
mechanism. Given that a native thread could only be used under W32
we don't do that at all. */
#define TIMERTICK_INTERVAL_SEC (0)
#define TIMERTICK_INTERVAL_USEC (500000)
/* Flag to indicate that a shutdown was requested. */
static int shutdown_pending;
/* It is possible that we are currently running under setuid permissions */
static int maybe_setuid = 1;
/* Flag telling whether we are running as a pipe server. */
static int pipe_server;
/* Name of the communication socket */
static char *socket_name;
/* Name of the redirected socket or NULL. */
static char *redir_socket_name;
/* We need to keep track of the server's nonces (these are dummies for
POSIX systems). */
static assuan_sock_nonce_t socket_nonce;
/* Value for the listen() backlog argument. Change at runtime with
* --listen-backlog. */
static int listen_backlog = 64;
#ifdef HAVE_W32_SYSTEM
static HANDLE the_event;
#else
/* PID to notify update of usb devices. */
static pid_t main_thread_pid;
#endif
#ifdef HAVE_PSELECT_NO_EINTR
/* FD to notify changes. */
static int notify_fd;
#endif
static char *create_socket_name (char *standard_name);
static gnupg_fd_t create_server_socket (const char *name,
char **r_redir_name,
assuan_sock_nonce_t *nonce);
static void *start_connection_thread (void *arg);
static void handle_connections (gnupg_fd_t listen_fd);
/* Pth wrapper function definitions. */
ASSUAN_SYSTEM_NPTH_IMPL;
static int active_connections;
static char *
make_libversion (const char *libname, const char *(*getfnc)(const char*))
{
const char *s;
char *result;
if (maybe_setuid)
{
gcry_control (GCRYCTL_INIT_SECMEM, 0, 0); /* Drop setuid. */
maybe_setuid = 0;
}
s = getfnc (NULL);
result = xmalloc (strlen (libname) + 1 + strlen (s) + 1);
strcpy (stpcpy (stpcpy (result, libname), " "), s);
return result;
}
static const char *
my_strusage (int level)
{
static char *ver_gcry, *ver_ksba;
const char *p;
switch (level)
{
case 9: p = "GPL-3.0-or-later"; break;
case 11: p = "@SCDAEMON@ (@GNUPG@)";
break;
case 13: p = VERSION; break;
case 14: p = GNUPG_DEF_COPYRIGHT_LINE; break;
case 17: p = PRINTABLE_OS_NAME; break;
case 19: p = _("Please report bugs to <@EMAIL@>.\n"); break;
case 20:
if (!ver_gcry)
ver_gcry = make_libversion ("libgcrypt", gcry_check_version);
p = ver_gcry;
break;
case 21:
if (!ver_ksba)
ver_ksba = make_libversion ("libksba", ksba_check_version);
p = ver_ksba;
break;
case 1:
case 40: p = _("Usage: @SCDAEMON@ [options] (-h for help)");
break;
case 41: p = _("Syntax: scdaemon [options] [command [args]]\n"
"Smartcard daemon for @GNUPG@\n");
break;
default: p = NULL;
}
return p;
}
static int
tid_log_callback (unsigned long *rvalue)
{
int len = sizeof (*rvalue);
npth_t thread;
thread = npth_self ();
if (sizeof (thread) < len)
len = sizeof (thread);
memcpy (rvalue, &thread, len);
return 2; /* Use use hex representation. */
}
/* Setup the debugging. With a LEVEL of NULL only the active debug
flags are propagated to the subsystems. With LEVEL set, a specific
set of debug flags is set; thus overriding all flags already
set. */
static void
set_debug (const char *level)
{
int numok = (level && digitp (level));
int numlvl = numok? atoi (level) : 0;
if (!level)
;
else if (!strcmp (level, "none") || (numok && numlvl < 1))
opt.debug = 0;
else if (!strcmp (level, "basic") || (numok && numlvl <= 2))
opt.debug = DBG_IPC_VALUE;
else if (!strcmp (level, "advanced") || (numok && numlvl <= 5))
opt.debug = DBG_IPC_VALUE;
else if (!strcmp (level, "expert") || (numok && numlvl <= 8))
opt.debug = (DBG_IPC_VALUE|DBG_CACHE_VALUE|DBG_CARD_IO_VALUE);
else if (!strcmp (level, "guru") || numok)
{
opt.debug = ~0;
/* Unless the "guru" string has been used we don't want to allow
hashing debugging. The rationale is that people tend to
select the highest debug value and would then clutter their
disk with debug files which may reveal confidential data. */
if (numok)
opt.debug &= ~(DBG_HASHING_VALUE);
}
else
{
log_error (_("invalid debug-level '%s' given\n"), level);
scd_exit(2);
}
if (opt.debug && !opt.verbose)
opt.verbose = 1;
if (opt.debug && opt.quiet)
opt.quiet = 0;
if (opt.debug & DBG_MPI_VALUE)
gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 2);
if (opt.debug & DBG_CRYPTO_VALUE )
gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 1);
gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose);
if (opt.debug)
parse_debug_flag (NULL, &opt.debug, debug_flags);
}
static void
cleanup (void)
{
if (socket_name && *socket_name)
{
char *name;
name = redir_socket_name? redir_socket_name : socket_name;
gnupg_remove (name);
*socket_name = 0;
}
}
static void
setup_signal_mask (void)
{
#ifndef HAVE_W32_SYSTEM
npth_sigev_init ();
npth_sigev_add (SIGHUP);
npth_sigev_add (SIGUSR1);
npth_sigev_add (SIGUSR2);
npth_sigev_add (SIGINT);
npth_sigev_add (SIGCONT);
npth_sigev_add (SIGTERM);
npth_sigev_fini ();
main_thread_pid = getpid ();
#endif
}
int
main (int argc, char **argv )
{
gpgrt_argparse_t pargs;
int orig_argc;
char **orig_argv;
char *last_configname = NULL;
const char *configname = NULL;
const char *shell;
int debug_argparser = 0;
const char *debug_level = NULL;
int greeting = 0;
int nogreeting = 0;
int multi_server = 0;
int is_daemon = 0;
int nodetach = 0;
int csh_style = 0;
char *logfile = NULL;
int debug_wait = 0;
int gpgconf_list = 0;
char *config_filename = NULL;
int allow_coredump = 0;
struct assuan_malloc_hooks malloc_hooks;
int res;
npth_t pipecon_handler;
const char *application_priority = NULL;
early_system_init ();
gpgrt_set_strusage (my_strusage);
gcry_control (GCRYCTL_SUSPEND_SECMEM_WARN);
/* Please note that we may running SUID(ROOT), so be very CAREFUL
when adding any stuff between here and the call to INIT_SECMEM()
somewhere after the option parsing */
log_set_prefix ("scdaemon", GPGRT_LOG_WITH_PREFIX | GPGRT_LOG_WITH_PID);
/* Make sure that our subsystems are ready. */
i18n_init ();
init_common_subsystems (&argc, &argv);
ksba_set_malloc_hooks (gcry_malloc, gcry_realloc, gcry_free);
malloc_hooks.malloc = gcry_malloc;
malloc_hooks.realloc = gcry_realloc;
malloc_hooks.free = gcry_free;
assuan_set_malloc_hooks (&malloc_hooks);
assuan_set_gpg_err_source (GPG_ERR_SOURCE_DEFAULT);
assuan_set_system_hooks (ASSUAN_SYSTEM_NPTH);
assuan_sock_init ();
setup_libassuan_logging (&opt.debug, NULL);
setup_libgcrypt_logging ();
gcry_control (GCRYCTL_USE_SECURE_RNDPOOL);
disable_core_dumps ();
/* Set default options. */
opt.allow_admin = 1;
opt.pcsc_driver = DEFAULT_PCSC_DRIVER;
shell = getenv ("SHELL");
if (shell && strlen (shell) >= 3 && !strcmp (shell+strlen (shell)-3, "csh") )
csh_style = 1;
/* Check whether we have a config file on the commandline */
orig_argc = argc;
orig_argv = argv;
pargs.argc = &argc;
pargs.argv = &argv;
pargs.flags= (ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION);
while (gpgrt_argparse (NULL, &pargs, opts))
{
switch (pargs.r_opt)
{
case oDebug:
case oDebugAll:
debug_argparser++;
break;
case oHomedir:
gnupg_set_homedir (pargs.r.ret_str);
break;
}
}
/* Reset the flags. */
pargs.flags &= ~(ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION);
/* initialize the secure memory. */
gcry_control (GCRYCTL_INIT_SECMEM, 16384, 0);
maybe_setuid = 0;
/*
Now we are working under our real uid
*/
/* The configuraton directories for use by gpgrt_argparser. */
gpgrt_set_confdir (GPGRT_CONFDIR_SYS, gnupg_sysconfdir ());
gpgrt_set_confdir (GPGRT_CONFDIR_USER, gnupg_homedir ());
/* We are re-using the struct, thus the reset flag. We OR the
* flags so that the internal intialized flag won't be cleared. */
argc = orig_argc;
argv = orig_argv;
pargs.argc = &argc;
pargs.argv = &argv;
pargs.flags |= (ARGPARSE_FLAG_RESET
| ARGPARSE_FLAG_KEEP
| ARGPARSE_FLAG_SYS
| ARGPARSE_FLAG_USER);
while (gpgrt_argparser (&pargs, opts, SCDAEMON_NAME EXTSEP_S "conf"))
{
switch (pargs.r_opt)
{
case ARGPARSE_CONFFILE:
if (debug_argparser)
log_info (_("reading options from '%s'\n"),
pargs.r_type? pargs.r.ret_str: "[cmdline]");
if (pargs.r_type)
{
xfree (last_configname);
last_configname = xstrdup (pargs.r.ret_str);
configname = last_configname;
}
else
configname = NULL;
break;
case aGPGConfList: gpgconf_list = 1; break;
case aGPGConfTest: gpgconf_list = 2; break;
case oQuiet: opt.quiet = 1; break;
case oVerbose: opt.verbose++; break;
case oBatch: opt.batch=1; break;
case oDebug:
if (parse_debug_flag (pargs.r.ret_str, &opt.debug, debug_flags))
{
pargs.r_opt = ARGPARSE_INVALID_ARG;
pargs.err = ARGPARSE_PRINT_ERROR;
}
break;
case oDebugAll: opt.debug = ~0; break;
case oDebugLevel: debug_level = pargs.r.ret_str; break;
case oDebugWait: debug_wait = pargs.r.ret_int; break;
case oDebugAllowCoreDump:
enable_core_dumps ();
allow_coredump = 1;
break;
case oDebugCCIDDriver:
#ifdef HAVE_LIBUSB
ccid_set_debug_level (ccid_set_debug_level (-1)+1);
#endif /*HAVE_LIBUSB*/
break;
case oDebugLogTid:
log_set_pid_suffix_cb (tid_log_callback);
break;
case oDebugAllowPINLogging:
opt.debug_allow_pin_logging = 1;
break;
case oDebugAssuanLogCats:
set_libassuan_log_cats (pargs.r.ret_ulong);
break;
case oNoGreeting: nogreeting = 1; break;
case oNoVerbose: opt.verbose = 0; break;
case oHomedir: gnupg_set_homedir (pargs.r.ret_str); break;
case oNoDetach: nodetach = 1; break;
case oLogFile: logfile = pargs.r.ret_str; break;
case oCsh: csh_style = 1; break;
case oSh: csh_style = 0; break;
case oServer: pipe_server = 1; break;
case oMultiServer: pipe_server = 1; multi_server = 1; break;
case oDaemon: is_daemon = 1; break;
case oReaderPort: opt.reader_port = pargs.r.ret_str; break;
case octapiDriver: opt.ctapi_driver = pargs.r.ret_str; break;
case opcscDriver: opt.pcsc_driver = pargs.r.ret_str; break;
case opcscShared: opt.pcsc_shared = 1; break;
case oDisableCCID: opt.disable_ccid = 1; break;
case oDisableOpenSC: break;
case oDisablePinpad: opt.disable_pinpad = 1; break;
case oAllowAdmin: /* Dummy because allow is now the default. */
break;
case oDenyAdmin: opt.allow_admin = 0; break;
case oCardTimeout: opt.card_timeout = pargs.r.ret_ulong; break;
case oDisableApplication:
add_to_strlist (&opt.disabled_applications, pargs.r.ret_str);
break;
case oApplicationPriority:
application_priority = pargs.r.ret_str;
break;
case oEnablePinpadVarlen: opt.enable_pinpad_varlen = 1; break;
+ case oCompatibilityFlags:
+ if (parse_compatibility_flags (pargs.r.ret_str, &opt.compat_flags,
+ compatibility_flags))
+ {
+ pargs.r_opt = ARGPARSE_INVALID_ARG;
+ pargs.err = ARGPARSE_PRINT_WARNING;
+ }
+ break;
+
case oListenBacklog:
listen_backlog = pargs.r.ret_int;
break;
default:
if (configname)
pargs.err = ARGPARSE_PRINT_WARNING;
else
pargs.err = ARGPARSE_PRINT_ERROR;
break;
}
}
gpgrt_argparse (NULL, &pargs, NULL); /* Release internal state. */
if (!last_configname)
config_filename = gpgrt_fnameconcat (gnupg_homedir (),
SCDAEMON_NAME EXTSEP_S "conf",
NULL);
else
{
config_filename = last_configname;
last_configname = NULL;
}
if (log_get_errorcount(0))
exit(2);
/* Process common component options. */
if (parse_comopt (GNUPG_MODULE_NAME_SCDAEMON, debug_argparser))
exit(2);
if (!logfile)
{
logfile = comopt.logfile;
comopt.logfile = NULL;
}
if (nogreeting )
greeting = 0;
if (greeting)
{
es_fprintf (es_stderr, "%s %s; %s\n",
gpgrt_strusage (11),gpgrt_strusage (13),gpgrt_strusage (14));
es_fprintf (es_stderr, "%s\n", gpgrt_strusage (15));
}
#ifdef IS_DEVELOPMENT_VERSION
log_info ("NOTE: this is a development version!\n");
#endif
/* Print a warning if an argument looks like an option. */
if (!opt.quiet && !(pargs.flags & ARGPARSE_FLAG_STOP_SEEN))
{
int i;
for (i=0; i < argc; i++)
if (argv[i][0] == '-' && argv[i][1] == '-')
log_info (_("Note: '%s' is not considered an option\n"), argv[i]);
}
if (atexit (cleanup))
{
log_error ("atexit failed\n");
cleanup ();
exit (1);
}
set_debug (debug_level);
if (initialize_module_command ())
{
log_error ("initialization failed\n");
cleanup ();
exit (1);
}
if (gpgconf_list == 2)
scd_exit (0);
if (gpgconf_list)
{
/* List options and default values in the GPG Conf format. */
es_printf ("debug-level:%lu:\"none:\n", GC_OPT_FLAG_DEFAULT);
es_printf ("pcsc-driver:%lu:\"%s:\n",
GC_OPT_FLAG_DEFAULT, DEFAULT_PCSC_DRIVER );
es_printf ("card-timeout:%lu:%d:\n", GC_OPT_FLAG_DEFAULT, 0);
scd_exit (0);
}
/* Now start with logging to a file if this is desired. */
if (logfile)
{
log_set_file (logfile);
log_set_prefix (NULL, (GPGRT_LOG_WITH_PREFIX
| GPGRT_LOG_WITH_TIME
| GPGRT_LOG_WITH_PID));
}
if (debug_wait && pipe_server)
{
log_debug ("waiting for debugger - my pid is %u .....\n",
(unsigned int)getpid());
gnupg_sleep (debug_wait);
log_debug ("... okay\n");
}
if (application_priority)
app_update_priority_list (application_priority);
if (pipe_server)
{
/* This is the simple pipe based server */
ctrl_t ctrl;
npth_attr_t tattr;
gnupg_fd_t fd = GNUPG_INVALID_FD;
#ifndef HAVE_W32_SYSTEM
{
struct sigaction sa;
sa.sa_handler = SIG_IGN;
sigemptyset (&sa.sa_mask);
sa.sa_flags = 0;
sigaction (SIGPIPE, &sa, NULL);
}
#endif
npth_init ();
setup_signal_mask ();
gpgrt_set_syscall_clamp (npth_unprotect, npth_protect);
/* If --debug-allow-core-dump has been given we also need to
switch the working directory to a place where we can actually
write. */
if (allow_coredump)
{
if (chdir("/tmp"))
log_debug ("chdir to '/tmp' failed: %s\n", strerror (errno));
else
log_debug ("changed working directory to '/tmp'\n");
}
/* In multi server mode we need to listen on an additional
socket. Create that socket now before starting the handler
for the pipe connection. This allows that handler to send
back the name of that socket. */
if (multi_server)
{
socket_name = create_socket_name (SCDAEMON_SOCK_NAME);
fd = create_server_socket (socket_name,
&redir_socket_name, &socket_nonce);
}
res = npth_attr_init (&tattr);
if (res)
{
log_error ("error allocating thread attributes: %s\n",
strerror (res));
scd_exit (2);
}
npth_attr_setdetachstate (&tattr, NPTH_CREATE_DETACHED);
ctrl = xtrycalloc (1, sizeof *ctrl);
if ( !ctrl )
{
log_error ("error allocating connection control data: %s\n",
strerror (errno) );
scd_exit (2);
}
ctrl->thread_startup.fd = GNUPG_INVALID_FD;
res = npth_create (&pipecon_handler, &tattr, start_connection_thread, ctrl);
if (res)
{
log_error ("error spawning pipe connection handler: %s\n",
strerror (res) );
xfree (ctrl);
scd_exit (2);
}
npth_setname_np (pipecon_handler, "pipe-connection");
npth_attr_destroy (&tattr);
/* We run handle_connection to wait for the shutdown signal and
to run the ticker stuff. */
handle_connections (fd);
if (fd != GNUPG_INVALID_FD)
assuan_sock_close (fd);
}
else if (!is_daemon)
{
log_info (_("please use the option '--daemon'"
" to run the program in the background\n"));
}
else
{ /* Regular server mode */
gnupg_fd_t fd;
#ifndef HAVE_W32_SYSTEM
pid_t pid;
int i;
#endif
/* Create the socket. */
socket_name = create_socket_name (SCDAEMON_SOCK_NAME);
fd = create_server_socket (socket_name,
&redir_socket_name, &socket_nonce);
fflush (NULL);
#ifdef HAVE_W32_SYSTEM
(void)csh_style;
(void)nodetach;
#else
pid = fork ();
if (pid == (pid_t)-1)
{
log_fatal ("fork failed: %s\n", strerror (errno) );
exit (1);
}
else if (pid)
{ /* we are the parent */
char *infostr;
close (fd);
/* create the info string: <name>:<pid>:<protocol_version> */
if (gpgrt_asprintf (&infostr, "SCDAEMON_INFO=%s:%lu:1",
socket_name, (ulong) pid) < 0)
{
log_error ("out of core\n");
kill (pid, SIGTERM);
exit (1);
}
*socket_name = 0; /* don't let cleanup() remove the socket -
the child should do this from now on */
if (argc)
{ /* run the program given on the commandline */
if (putenv (infostr))
{
log_error ("failed to set environment: %s\n",
strerror (errno) );
kill (pid, SIGTERM );
exit (1);
}
execvp (argv[0], argv);
log_error ("failed to run the command: %s\n", strerror (errno));
kill (pid, SIGTERM);
exit (1);
}
else
{
/* Print the environment string, so that the caller can use
shell's eval to set it */
if (csh_style)
{
*strchr (infostr, '=') = ' ';
es_printf ( "setenv %s;\n", infostr);
}
else
{
es_printf ( "%s; export SCDAEMON_INFO;\n", infostr);
}
xfree (infostr);
exit (0);
}
/* NOTREACHED */
} /* end parent */
/* This is the child. */
npth_init ();
setup_signal_mask ();
gpgrt_set_syscall_clamp (npth_unprotect, npth_protect);
/* Detach from tty and put process into a new session. */
if (!nodetach )
{
/* Close stdin, stdout and stderr unless it is the log stream. */
for (i=0; i <= 2; i++)
{
if (!log_test_fd (i) && i != fd )
{
if ( !close (i)
&& open ("/dev/null", i? O_WRONLY : O_RDONLY) == -1)
{
log_error ("failed to open '%s': %s\n",
"/dev/null", strerror (errno));
cleanup ();
exit (1);
}
}
}
if (setsid() == -1)
{
log_error ("setsid() failed: %s\n", strerror(errno) );
cleanup ();
exit (1);
}
}
{
struct sigaction sa;
sa.sa_handler = SIG_IGN;
sigemptyset (&sa.sa_mask);
sa.sa_flags = 0;
sigaction (SIGPIPE, &sa, NULL);
}
#endif /*!HAVE_W32_SYSTEM*/
if (gnupg_chdir (gnupg_daemon_rootdir ()))
{
log_error ("chdir to '%s' failed: %s\n",
gnupg_daemon_rootdir (), strerror (errno));
exit (1);
}
handle_connections (fd);
assuan_sock_close (fd);
}
xfree (config_filename);
return 0;
}
void
scd_exit (int rc)
{
apdu_prepare_exit ();
#if 0
#warning no update_random_seed_file
update_random_seed_file();
#endif
#if 0
/* at this time a bit annoying */
if (opt.debug & DBG_MEMSTAT_VALUE)
{
gcry_control( GCRYCTL_DUMP_MEMORY_STATS );
gcry_control( GCRYCTL_DUMP_RANDOM_STATS );
}
if (opt.debug)
gcry_control (GCRYCTL_DUMP_SECMEM_STATS );
#endif
gcry_control (GCRYCTL_TERM_SECMEM );
rc = rc? rc : log_get_errorcount(0)? 2 : 0;
exit (rc);
}
static void
scd_init_default_ctrl (ctrl_t ctrl)
{
(void)ctrl;
}
static void
scd_deinit_default_ctrl (ctrl_t ctrl)
{
if (!ctrl)
return;
xfree (ctrl->in_data.value);
ctrl->in_data.value = NULL;
ctrl->in_data.valuelen = 0;
}
/* Return the name of the socket to be used to connect to this
process. If no socket is available, return NULL. */
const char *
scd_get_socket_name (void)
{
if (socket_name && *socket_name)
return socket_name;
return NULL;
}
#ifndef HAVE_W32_SYSTEM
static void
handle_signal (int signo)
{
switch (signo)
{
case SIGHUP:
log_info ("SIGHUP received - "
"re-reading configuration and resetting cards\n");
/* reread_configuration (); */
break;
case SIGUSR1:
log_info ("SIGUSR1 received - printing internal information:\n");
/* Fixme: We need to see how to integrate pth dumping into our
logging system. */
/* pth_ctrl (PTH_CTRL_DUMPSTATE, log_get_stream ()); */
app_dump_state ();
break;
case SIGUSR2:
log_info ("SIGUSR2 received - no action defined\n");
break;
case SIGCONT:
/* Nothing. */
log_debug ("SIGCONT received - breaking select\n");
break;
case SIGTERM:
if (!shutdown_pending)
log_info ("SIGTERM received - shutting down ...\n");
else
log_info ("SIGTERM received - still %i running threads\n",
active_connections);
shutdown_pending++;
if (shutdown_pending > 2)
{
log_info ("shutdown forced\n");
log_info ("%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13));
cleanup ();
scd_exit (0);
}
break;
case SIGINT:
log_info ("SIGINT received - immediate shutdown\n");
log_info( "%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13));
cleanup ();
scd_exit (0);
break;
default:
log_info ("signal %d received - no action defined\n", signo);
}
}
#endif /*!HAVE_W32_SYSTEM*/
/* Create a name for the socket. We check for valid characters as
well as against a maximum allowed length for a unix domain socket
is done. The function terminates the process in case of an error.
Returns: Pointer to an allocated string with the absolute name of
the socket used. */
static char *
create_socket_name (char *standard_name)
{
char *name;
name = make_filename (gnupg_socketdir (), standard_name, NULL);
if (strchr (name, PATHSEP_C))
{
log_error (("'%s' are not allowed in the socket name\n"), PATHSEP_S);
scd_exit (2);
}
return name;
}
/* Create a Unix domain socket with NAME. Returns the file descriptor
or terminates the process in case of an error. If the socket has
been redirected the name of the real socket is stored as a malloced
string at R_REDIR_NAME. */
static gnupg_fd_t
create_server_socket (const char *name, char **r_redir_name,
assuan_sock_nonce_t *nonce)
{
struct sockaddr *addr;
struct sockaddr_un *unaddr;
socklen_t len;
gnupg_fd_t fd;
int rc;
xfree (*r_redir_name);
*r_redir_name = NULL;
fd = assuan_sock_new (AF_UNIX, SOCK_STREAM, 0);
if (fd == GNUPG_INVALID_FD)
{
log_error (_("can't create socket: %s\n"), strerror (errno));
scd_exit (2);
}
unaddr = xmalloc (sizeof (*unaddr));
addr = (struct sockaddr*)unaddr;
{
int redirected;
if (assuan_sock_set_sockaddr_un (name, addr, &redirected))
{
if (errno == ENAMETOOLONG)
log_error (_("socket name '%s' is too long\n"), name);
else
log_error ("error preparing socket '%s': %s\n",
name, gpg_strerror (gpg_error_from_syserror ()));
scd_exit (2);
}
if (redirected)
{
*r_redir_name = xstrdup (unaddr->sun_path);
if (opt.verbose)
log_info ("redirecting socket '%s' to '%s'\n", name, *r_redir_name);
}
}
len = SUN_LEN (unaddr);
rc = assuan_sock_bind (fd, addr, len);
if (rc == -1 && errno == EADDRINUSE)
{
gnupg_remove (unaddr->sun_path);
rc = assuan_sock_bind (fd, addr, len);
}
if (rc != -1
&& (rc=assuan_sock_get_nonce (addr, len, nonce)))
log_error (_("error getting nonce for the socket\n"));
if (rc == -1)
{
log_error (_("error binding socket to '%s': %s\n"),
unaddr->sun_path,
gpg_strerror (gpg_error_from_syserror ()));
assuan_sock_close (fd);
scd_exit (2);
}
if (gnupg_chmod (unaddr->sun_path, "-rwx"))
log_error (_("can't set permissions of '%s': %s\n"),
unaddr->sun_path, strerror (errno));
if (listen (FD2INT(fd), listen_backlog) == -1)
{
log_error ("listen(fd, %d) failed: %s\n",
listen_backlog, gpg_strerror (gpg_error_from_syserror ()));
assuan_sock_close (fd);
scd_exit (2);
}
if (opt.verbose)
log_info (_("listening on socket '%s'\n"), unaddr->sun_path);
return fd;
}
/* This is the standard connection thread's main function. */
static void *
start_connection_thread (void *arg)
{
ctrl_t ctrl = arg;
if (ctrl->thread_startup.fd != GNUPG_INVALID_FD
&& assuan_sock_check_nonce (ctrl->thread_startup.fd, &socket_nonce))
{
log_info (_("error reading nonce on fd %d: %s\n"),
FD2INT(ctrl->thread_startup.fd), strerror (errno));
assuan_sock_close (ctrl->thread_startup.fd);
xfree (ctrl);
return NULL;
}
active_connections++;
scd_init_default_ctrl (ctrl);
if (opt.verbose)
log_info (_("handler for fd %d started\n"),
FD2INT(ctrl->thread_startup.fd));
/* If this is a pipe server, we request a shutdown if the command
handler asked for it. With the next ticker event and given that
no other connections are running the shutdown will then
happen. */
if (scd_command_handler (ctrl, ctrl->thread_startup.fd)
&& pipe_server)
shutdown_pending = 1;
if (opt.verbose)
log_info (_("handler for fd %d terminated\n"),
FD2INT (ctrl->thread_startup.fd));
scd_deinit_default_ctrl (ctrl);
xfree (ctrl);
if (--active_connections == 0)
scd_kick_the_loop ();
return NULL;
}
void
scd_kick_the_loop (void)
{
/* Kick the select loop. */
#ifdef HAVE_W32_SYSTEM
int ret = SetEvent (the_event);
if (ret == 0)
log_error ("SetEvent for scd_kick_the_loop failed: %s\n",
w32_strerror (-1));
#elif defined(HAVE_PSELECT_NO_EINTR)
write (notify_fd, "", 1);
#else
int ret = kill (main_thread_pid, SIGCONT);
if (ret < 0)
log_error ("sending signal for scd_kick_the_loop failed: %s\n",
gpg_strerror (gpg_error_from_syserror ()));
#endif
}
/* Connection handler loop. Wait for connection requests and spawn a
thread after accepting a connection. LISTEN_FD is allowed to be -1
in which case this code will only do regular timeouts and handle
signals. */
static void
handle_connections (gnupg_fd_t listen_fd)
{
npth_attr_t tattr;
struct sockaddr_un paddr;
socklen_t plen;
fd_set fdset, read_fdset;
int nfd;
int ret;
struct timespec timeout;
struct timespec *t;
int saved_errno;
#ifdef HAVE_W32_SYSTEM
HANDLE events[2];
unsigned int events_set;
#else
int signo;
#endif
#ifdef HAVE_PSELECT_NO_EINTR
int pipe_fd[2];
ret = gnupg_create_pipe (pipe_fd);
if (ret)
{
log_error ("pipe creation failed: %s\n", gpg_strerror (ret));
return;
}
notify_fd = pipe_fd[1];
#endif
ret = npth_attr_init(&tattr);
if (ret)
{
log_error ("npth_attr_init failed: %s\n", strerror (ret));
return;
}
npth_attr_setdetachstate (&tattr, NPTH_CREATE_DETACHED);
#ifdef HAVE_W32_SYSTEM
{
HANDLE h, h2;
SECURITY_ATTRIBUTES sa = { sizeof (SECURITY_ATTRIBUTES), NULL, TRUE};
events[0] = the_event = INVALID_HANDLE_VALUE;
events[1] = INVALID_HANDLE_VALUE;
/* Create event for manual reset, initially non-signaled. Make it
* waitable and inheritable. */
h = CreateEvent (&sa, TRUE, FALSE, NULL);
if (!h)
log_error ("can't create scd event: %s\n", w32_strerror (-1) );
else if (!DuplicateHandle (GetCurrentProcess(), h,
GetCurrentProcess(), &h2,
EVENT_MODIFY_STATE|SYNCHRONIZE, TRUE, 0))
{
log_error ("setting synchronize for scd_kick_the_loop failed: %s\n",
w32_strerror (-1) );
CloseHandle (h);
}
else
{
CloseHandle (h);
events[0] = the_event = h2;
}
}
#endif
FD_ZERO (&fdset);
nfd = 0;
if (listen_fd != GNUPG_INVALID_FD)
{
FD_SET (FD2INT (listen_fd), &fdset);
nfd = FD2INT (listen_fd);
}
for (;;)
{
int periodical_check;
int max_fd = nfd;
if (shutdown_pending)
{
if (active_connections == 0)
break; /* ready */
/* Do not accept anymore connections but wait for existing
connections to terminate. We do this by clearing out all
file descriptors to wait for, so that the select will be
used to just wait on a signal or timeout event. */
FD_ZERO (&fdset);
listen_fd = GNUPG_INVALID_FD;
}
periodical_check = scd_update_reader_status_file ();
timeout.tv_sec = TIMERTICK_INTERVAL_SEC;
timeout.tv_nsec = TIMERTICK_INTERVAL_USEC * 1000;
if (shutdown_pending || periodical_check)
t = &timeout;
else
t = NULL;
/* POSIX says that fd_set should be implemented as a structure,
thus a simple assignment is fine to copy the entire set. */
read_fdset = fdset;
#ifdef HAVE_PSELECT_NO_EINTR
FD_SET (pipe_fd[0], &read_fdset);
if (max_fd < pipe_fd[0])
max_fd = pipe_fd[0];
#else
(void)max_fd;
#endif
#ifndef HAVE_W32_SYSTEM
ret = npth_pselect (max_fd+1, &read_fdset, NULL, NULL, t,
npth_sigev_sigmask ());
saved_errno = errno;
while (npth_sigev_get_pending(&signo))
handle_signal (signo);
#else
ret = npth_eselect (nfd+1, &read_fdset, NULL, NULL, t,
events, &events_set);
saved_errno = errno;
if (events_set & 1)
continue;
#endif
if (ret == -1 && saved_errno != EINTR)
{
log_error (_("npth_pselect failed: %s - waiting 1s\n"),
strerror (saved_errno));
gnupg_sleep (1);
continue;
}
if (ret <= 0)
/* Timeout. Will be handled when calculating the next timeout. */
continue;
#ifdef HAVE_PSELECT_NO_EINTR
if (FD_ISSET (pipe_fd[0], &read_fdset))
{
char buf[256];
read (pipe_fd[0], buf, sizeof buf);
}
#endif
if (listen_fd != GNUPG_INVALID_FD
&& FD_ISSET (FD2INT (listen_fd), &read_fdset))
{
ctrl_t ctrl;
gnupg_fd_t fd;
plen = sizeof paddr;
fd = INT2FD (npth_accept (FD2INT (listen_fd),
(struct sockaddr *)&paddr, &plen));
if (fd == GNUPG_INVALID_FD)
{
log_error ("accept failed: %s\n", strerror (errno));
}
else if ( !(ctrl = xtrycalloc (1, sizeof *ctrl)) )
{
log_error ("error allocating connection control data: %s\n",
strerror (errno) );
assuan_sock_close (fd);
}
else
{
char threadname[50];
npth_t thread;
snprintf (threadname, sizeof threadname, "conn fd=%d",
FD2INT (fd));
ctrl->thread_startup.fd = fd;
ret = npth_create (&thread, &tattr, start_connection_thread, ctrl);
if (ret)
{
log_error ("error spawning connection handler: %s\n",
strerror (ret));
xfree (ctrl);
assuan_sock_close (fd);
}
else
npth_setname_np (thread, threadname);
}
}
}
#ifdef HAVE_W32_SYSTEM
if (the_event != INVALID_HANDLE_VALUE)
CloseHandle (the_event);
#endif
#ifdef HAVE_PSELECT_NO_EINTR
close (pipe_fd[0]);
close (pipe_fd[1]);
#endif
cleanup ();
log_info (_("%s %s stopped\n"), gpgrt_strusage(11), gpgrt_strusage(13));
npth_attr_destroy (&tattr);
}
/* Return the number of active connections. */
int
get_active_connection_count (void)
{
return active_connections;
}
diff --git a/scd/scdaemon.h b/scd/scdaemon.h
index 7b82d1b21..16873c54b 100644
--- a/scd/scdaemon.h
+++ b/scd/scdaemon.h
@@ -1,164 +1,172 @@
/* scdaemon.h - Global definitions for the SCdaemon
* Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
*
* This file is part of GnuPG.
*
* GnuPG is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* GnuPG is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <https://www.gnu.org/licenses/>.
*/
#ifndef SCDAEMON_H
#define SCDAEMON_H
#ifdef GPG_ERR_SOURCE_DEFAULT
#error GPG_ERR_SOURCE_DEFAULT already defined
#endif
#define GPG_ERR_SOURCE_DEFAULT GPG_ERR_SOURCE_SCD
#include <gpg-error.h>
#include <time.h>
#include <gcrypt.h>
#include "../common/util.h"
#include "../common/sysutils.h"
#include "app-common.h"
/* To convey some special hash algorithms we use algorithm numbers
reserved for application use. */
#ifndef GCRY_MODULE_ID_USER
#define GCRY_MODULE_ID_USER 1024
#endif
#define MD_USER_TLS_MD5SHA1 (GCRY_MODULE_ID_USER+1)
/* Maximum length of a digest. */
#define MAX_DIGEST_LEN 64
/* A large struct name "opt" to keep global flags. */
EXTERN_UNLESS_MAIN_MODULE
struct
{
unsigned int debug; /* Debug flags (DBG_foo_VALUE). */
int verbose; /* Verbosity level. */
int quiet; /* Be as quiet as possible. */
int dry_run; /* Don't change any persistent data. */
int batch; /* Batch mode. */
const char *ctapi_driver; /* Library to access the ctAPI. */
const char *pcsc_driver; /* Library to access the PC/SC system. */
const char *reader_port; /* NULL or reder port to use. */
int disable_ccid; /* Disable the use of the internal CCID driver. */
int disable_pinpad; /* Do not use a pinpad. */
int enable_pinpad_varlen; /* Use variable length input for pinpad. */
int allow_admin; /* Allow the use of admin commands for certain
cards. */
int pcsc_shared; /* Use shared PC/SC access. */
strlist_t disabled_applications; /* Card applications we do not
want to use. */
unsigned long card_timeout; /* Disconnect after N seconds of inactivity. */
int debug_allow_pin_logging; /* Allow PINs in debug output. */
+
+ /* Compatibility flags (COMPAT_FLAG_xxxx). */
+ unsigned int compat_flags;
} opt;
#define DBG_APP_VALUE 1 /* Debug app specific stuff. */
#define DBG_MPI_VALUE 2 /* debug mpi details */
#define DBG_CRYPTO_VALUE 4 /* debug low level crypto */
#define DBG_CARD_VALUE 16 /* debug card info */
#define DBG_MEMORY_VALUE 32 /* debug memory allocation stuff */
#define DBG_CACHE_VALUE 64 /* debug the caching */
#define DBG_MEMSTAT_VALUE 128 /* show memory statistics */
#define DBG_HASHING_VALUE 512 /* debug hashing operations */
#define DBG_IPC_VALUE 1024
#define DBG_CARD_IO_VALUE 2048 /* debug card I/O (e.g. APDUs). */
#define DBG_READER_VALUE 4096 /* Trace reader related functions. */
#define DBG_APP (opt.debug & DBG_APP_VALUE)
#define DBG_CRYPTO (opt.debug & DBG_CRYPTO_VALUE)
#define DBG_MEMORY (opt.debug & DBG_MEMORY_VALUE)
#define DBG_CACHE (opt.debug & DBG_CACHE_VALUE)
#define DBG_HASHING (opt.debug & DBG_HASHING_VALUE)
#define DBG_IPC (opt.debug & DBG_IPC_VALUE)
#define DBG_CARD (opt.debug & DBG_CARD_VALUE)
#define DBG_CARD_IO (opt.debug & DBG_CARD_IO_VALUE)
#define DBG_READER (opt.debug & DBG_READER_VALUE)
+
+#define COMPAT_CCID_NO_AUTO_DETACH 1
+
+
+
struct server_local_s;
struct card_ctx_s;
struct app_ctx_s;
struct server_control_s
{
/* Private data used to fire up the connection thread. We use this
structure do avoid an extra allocation for just a few bytes. */
struct {
gnupg_fd_t fd;
} thread_startup;
/* Local data of the server; used only in command.c. */
struct server_local_s *server_local;
/* The application context used with this connection or NULL if none
associated. Note that this is shared with the other connections:
All connections accessing the same reader are using the same
application context. */
struct card_ctx_s *card_ctx;
/* The currently active application for this context. We need to
* know this for cards which are able to switch on the fly between
* apps. */
apptype_t current_apptype;
/* Helper to store the value we are going to sign */
struct
{
unsigned char *value;
int valuelen;
} in_data;
};
/*-- scdaemon.c --*/
void scd_exit (int rc);
const char *scd_get_socket_name (void);
/*-- command.c --*/
gpg_error_t initialize_module_command (void);
int scd_command_handler (ctrl_t, gnupg_fd_t);
void send_status_info (ctrl_t ctrl, const char *keyword, ...)
GPGRT_ATTR_SENTINEL(1);
gpg_error_t send_status_direct (ctrl_t ctrl,
const char *keyword, const char *args);
gpg_error_t send_status_printf (ctrl_t ctrl, const char *keyword,
const char *format, ...) GPGRT_ATTR_PRINTF(3,4);
void send_keyinfo (ctrl_t ctrl, int data, const char *keygrip_str,
const char *serialno, const char *idstr,
const char *usage);
void pincache_put (ctrl_t ctrl, int slot, const char *appname,
const char *pinref, const char *pin, unsigned int pinlen);
gpg_error_t pincache_get (ctrl_t ctrl, int slot, const char *appname,
const char *pinref, char **r_pin);
void popup_prompt (void *opaque, int on);
/* Take care: this function assumes that CARD is locked. */
void send_client_notifications (card_t card, int removal);
void scd_kick_the_loop (void);
int get_active_connection_count (void);
/*-- app.c --*/
int scd_update_reader_status_file (void);
gpg_error_t app_send_devinfo (ctrl_t ctrl, int keep_looping);
#endif /*SCDAEMON_H*/

File Metadata

Mime Type
text/x-diff
Expires
Sat, Dec 6, 10:41 PM (1 d, 12 h)
Storage Engine
local-disk
Storage Format
Raw Data
Storage Handle
5a/bc/55f2b3e7c6df9816c8ca3141d09f

Event Timeline