diff --git a/agent/gpg-agent.c b/agent/gpg-agent.c index d5fe939db..5599dfd1f 100644 --- a/agent/gpg-agent.c +++ b/agent/gpg-agent.c @@ -1,3280 +1,3254 @@ /* gpg-agent.c - The GnuPG Agent - * Copyright (C) 2000-2007, 2009-2010 Free Software Foundation, Inc. - * Copyright (C) 2000-2016 Werner Koch + * Copyright (C) 2000-2020 Free Software Foundation, Inc. + * Copyright (C) 2000-2019 Werner Koch + * Copyright (C) 2015-2020 g10 Code GmbH * * This file is part of GnuPG. * * GnuPG is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * GnuPG is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . + * SPDX-License-Identifier: GPL-3.0-or-later */ #include -/* We don't want to have the macros from gpgrt here until we have - * completely replaced this module by the one from gpgrt. */ -#undef GPGRT_ENABLE_ARGPARSE_MACROS - #include #include #include #include #include #include #include #include #include #ifdef HAVE_W32_SYSTEM # ifndef WINVER # define WINVER 0x0500 /* Same as in common/sysutils.c */ # endif # ifdef HAVE_WINSOCK2_H # include # endif # include # include #else /*!HAVE_W32_SYSTEM*/ # include # include #endif /*!HAVE_W32_SYSTEM*/ #include #ifdef HAVE_SIGNAL_H # include #endif #include #define INCLUDED_BY_MAIN_MODULE 1 #define GNUPG_COMMON_NEED_AFLOCAL #include "agent.h" #include /* Malloc hooks and socket wrappers. */ -#include "../common/argparse.h" /* temporary hack. */ #include "../common/i18n.h" #include "../common/sysutils.h" #include "../common/gc-opt-flags.h" #include "../common/exechelp.h" #include "../common/asshelp.h" #include "../common/init.h" enum cmd_and_opt_values { aNull = 0, oCsh = 'c', oQuiet = 'q', oSh = 's', oVerbose = 'v', oNoVerbose = 500, aGPGConfList, aGPGConfTest, aUseStandardSocketP, oOptions, oDebug, oDebugAll, oDebugLevel, oDebugWait, oDebugQuickRandom, oDebugPinentry, oNoGreeting, oNoOptions, oHomedir, oNoDetach, oGrab, oNoGrab, oLogFile, oServer, oDaemon, oSupervised, oBatch, oPinentryProgram, oPinentryTouchFile, oPinentryInvisibleChar, oPinentryTimeout, oDisplay, oTTYname, oTTYtype, oLCctype, oLCmessages, oXauthority, oScdaemonProgram, oDefCacheTTL, oDefCacheTTLSSH, oMaxCacheTTL, oMaxCacheTTLSSH, oEnforcePassphraseConstraints, oMinPassphraseLen, oMinPassphraseNonalpha, oCheckPassphrasePattern, oMaxPassphraseDays, oEnablePassphraseHistory, oDisableExtendedKeyFormat, oEnableExtendedKeyFormat, oUseStandardSocket, oNoUseStandardSocket, oExtraSocket, oBrowserSocket, oFakedSystemTime, oIgnoreCacheForSigning, oAllowMarkTrusted, oNoAllowMarkTrusted, oAllowPresetPassphrase, oAllowLoopbackPinentry, oNoAllowLoopbackPinentry, oNoAllowExternalCache, oAllowEmacsPinentry, oKeepTTY, oKeepDISPLAY, oSSHSupport, oSSHFingerprintDigest, oPuttySupport, oDisableScdaemon, oDisableCheckOwnSocket, oS2KCount, oS2KCalibration, oAutoExpandSecmem, oListenBacklog, oWriteEnvFile, oNoop }; #ifndef ENAMETOOLONG # define ENAMETOOLONG EINVAL #endif -static ARGPARSE_OPTS opts[] = { +static gpgrt_opt_t opts[] = { ARGPARSE_c (aGPGConfList, "gpgconf-list", "@"), ARGPARSE_c (aGPGConfTest, "gpgconf-test", "@"), ARGPARSE_c (aUseStandardSocketP, "use-standard-socket-p", "@"), ARGPARSE_group (301, N_("@Options:\n ")), ARGPARSE_s_n (oDaemon, "daemon", N_("run in daemon mode (background)")), ARGPARSE_s_n (oServer, "server", N_("run in server mode (foreground)")), #ifndef HAVE_W32_SYSTEM ARGPARSE_s_n (oSupervised, "supervised", N_("run in supervised mode")), #endif ARGPARSE_s_n (oVerbose, "verbose", N_("verbose")), ARGPARSE_s_n (oQuiet, "quiet", N_("be somewhat more quiet")), ARGPARSE_s_n (oSh, "sh", N_("sh-style command output")), ARGPARSE_s_n (oCsh, "csh", N_("csh-style command output")), - ARGPARSE_s_s (oOptions, "options", N_("|FILE|read options from FILE")), + ARGPARSE_conffile (oOptions, "options", N_("|FILE|read options from FILE")), ARGPARSE_s_s (oDebug, "debug", "@"), ARGPARSE_s_n (oDebugAll, "debug-all", "@"), ARGPARSE_s_s (oDebugLevel, "debug-level", "@"), ARGPARSE_s_i (oDebugWait, "debug-wait", "@"), ARGPARSE_s_n (oDebugQuickRandom, "debug-quick-random", "@"), ARGPARSE_s_n (oDebugPinentry, "debug-pinentry", "@"), ARGPARSE_s_n (oNoDetach, "no-detach", N_("do not detach from the console")), - ARGPARSE_s_n (oGrab, "grab", "@"), - /* FIXME: Add the below string for 2.3 */ - /* N_("let PIN-Entry grab keyboard and mouse")), */ + ARGPARSE_s_n (oGrab, "grab", + /* */ N_("let PIN-Entry grab keyboard and mouse")), ARGPARSE_s_n (oNoGrab, "no-grab", "@"), ARGPARSE_s_s (oLogFile, "log-file", N_("use a log file for the server")), ARGPARSE_s_s (oPinentryProgram, "pinentry-program", /* */ N_("|PGM|use PGM as the PIN-Entry program")), ARGPARSE_s_s (oPinentryTouchFile, "pinentry-touch-file", "@"), ARGPARSE_s_s (oPinentryInvisibleChar, "pinentry-invisible-char", "@"), ARGPARSE_s_u (oPinentryTimeout, "pinentry-timeout", "@"), ARGPARSE_s_s (oScdaemonProgram, "scdaemon-program", /* */ N_("|PGM|use PGM as the SCdaemon program") ), ARGPARSE_s_n (oDisableScdaemon, "disable-scdaemon", /* */ N_("do not use the SCdaemon") ), ARGPARSE_s_n (oDisableCheckOwnSocket, "disable-check-own-socket", "@"), ARGPARSE_s_s (oExtraSocket, "extra-socket", /* */ N_("|NAME|accept some commands via NAME")), ARGPARSE_s_s (oBrowserSocket, "browser-socket", "@"), ARGPARSE_s_s (oFakedSystemTime, "faked-system-time", "@"), ARGPARSE_s_n (oBatch, "batch", "@"), ARGPARSE_s_s (oHomedir, "homedir", "@"), ARGPARSE_s_s (oDisplay, "display", "@"), ARGPARSE_s_s (oTTYname, "ttyname", "@"), ARGPARSE_s_s (oTTYtype, "ttytype", "@"), ARGPARSE_s_s (oLCctype, "lc-ctype", "@"), ARGPARSE_s_s (oLCmessages, "lc-messages", "@"), ARGPARSE_s_s (oXauthority, "xauthority", "@"), ARGPARSE_s_n (oKeepTTY, "keep-tty", /* */ N_("ignore requests to change the TTY")), ARGPARSE_s_n (oKeepDISPLAY, "keep-display", /* */ N_("ignore requests to change the X display")), ARGPARSE_s_u (oDefCacheTTL, "default-cache-ttl", N_("|N|expire cached PINs after N seconds")), ARGPARSE_s_u (oDefCacheTTLSSH, "default-cache-ttl-ssh", "@" ), ARGPARSE_s_u (oMaxCacheTTL, "max-cache-ttl", "@" ), ARGPARSE_s_u (oMaxCacheTTLSSH, "max-cache-ttl-ssh", "@" ), ARGPARSE_s_n (oEnforcePassphraseConstraints, "enforce-passphrase-constraints", /* */ "@"), ARGPARSE_s_u (oMinPassphraseLen, "min-passphrase-len", "@"), ARGPARSE_s_u (oMinPassphraseNonalpha, "min-passphrase-nonalpha", "@"), ARGPARSE_s_s (oCheckPassphrasePattern, "check-passphrase-pattern", "@"), ARGPARSE_s_u (oMaxPassphraseDays, "max-passphrase-days", "@"), ARGPARSE_s_n (oEnablePassphraseHistory, "enable-passphrase-history", "@"), ARGPARSE_s_n (oIgnoreCacheForSigning, "ignore-cache-for-signing", /* */ N_("do not use the PIN cache when signing")), ARGPARSE_s_n (oNoAllowExternalCache, "no-allow-external-cache", /* */ N_("disallow the use of an external password cache")), ARGPARSE_s_n (oNoAllowMarkTrusted, "no-allow-mark-trusted", /* */ N_("disallow clients to mark keys as \"trusted\"")), ARGPARSE_s_n (oAllowMarkTrusted, "allow-mark-trusted", "@"), ARGPARSE_s_n (oAllowPresetPassphrase, "allow-preset-passphrase", /* */ N_("allow presetting passphrase")), ARGPARSE_s_n (oNoAllowLoopbackPinentry, "no-allow-loopback-pinentry", N_("disallow caller to override the pinentry")), ARGPARSE_s_n (oAllowLoopbackPinentry, "allow-loopback-pinentry", "@"), ARGPARSE_s_n (oAllowEmacsPinentry, "allow-emacs-pinentry", /* */ N_("allow passphrase to be prompted through Emacs")), ARGPARSE_s_n (oSSHSupport, "enable-ssh-support", N_("enable ssh support")), ARGPARSE_s_s (oSSHFingerprintDigest, "ssh-fingerprint-digest", N_("|ALGO|use ALGO to show ssh fingerprints")), ARGPARSE_s_n (oPuttySupport, "enable-putty-support", #ifdef HAVE_W32_SYSTEM /* */ N_("enable putty support") #else /* */ "@" #endif ), ARGPARSE_s_n (oDisableExtendedKeyFormat, "disable-extended-key-format", "@"), ARGPARSE_s_n (oEnableExtendedKeyFormat, "enable-extended-key-format", "@"), ARGPARSE_s_u (oS2KCount, "s2k-count", "@"), ARGPARSE_s_u (oS2KCalibration, "s2k-calibration", "@"), ARGPARSE_op_u (oAutoExpandSecmem, "auto-expand-secmem", "@"), ARGPARSE_s_i (oListenBacklog, "listen-backlog", "@"), + ARGPARSE_noconffile (oNoOptions, "no-options", "@"), + /* Dummy options for backward compatibility. */ ARGPARSE_o_s (oWriteEnvFile, "write-env-file", "@"), ARGPARSE_s_n (oUseStandardSocket, "use-standard-socket", "@"), ARGPARSE_s_n (oNoUseStandardSocket, "no-use-standard-socket", "@"), /* Dummy options. */ ARGPARSE_end () /* End of list */ }; /* The list of supported debug flags. */ static struct debug_flags_s debug_flags [] = { { DBG_MPI_VALUE , "mpi" }, { DBG_CRYPTO_VALUE , "crypto" }, { DBG_MEMORY_VALUE , "memory" }, { DBG_CACHE_VALUE , "cache" }, { DBG_MEMSTAT_VALUE, "memstat" }, { DBG_HASHING_VALUE, "hashing" }, { DBG_IPC_VALUE , "ipc" }, { 77, NULL } /* 77 := Do not exit on "help" or "?". */ }; #define DEFAULT_CACHE_TTL (10*60) /* 10 minutes */ #define DEFAULT_CACHE_TTL_SSH (30*60) /* 30 minutes */ #define MAX_CACHE_TTL (120*60) /* 2 hours */ #define MAX_CACHE_TTL_SSH (120*60) /* 2 hours */ #define MIN_PASSPHRASE_LEN (8) #define MIN_PASSPHRASE_NONALPHA (1) #define MAX_PASSPHRASE_DAYS (0) /* The timer tick used for housekeeping stuff. Note that on Windows * we use a SetWaitableTimer seems to signal earlier than about 2 * seconds. Thus we use 4 seconds on all platforms except for * Windowsce. CHECK_OWN_SOCKET_INTERVAL defines how often we check * our own socket in standard socket mode. If that value is 0 we * don't check at all. All values are in seconds. */ #if defined(HAVE_W32CE_SYSTEM) # define TIMERTICK_INTERVAL (60) # define CHECK_OWN_SOCKET_INTERVAL (0) /* Never */ #else # define TIMERTICK_INTERVAL (4) # define CHECK_OWN_SOCKET_INTERVAL (60) #endif /* Flag indicating that the ssh-agent subsystem has been enabled. */ static int ssh_support; #ifdef HAVE_W32_SYSTEM /* Flag indicating that support for Putty has been enabled. */ static int putty_support; /* A magic value used with WM_COPYDATA. */ #define PUTTY_IPC_MAGIC 0x804e50ba /* To avoid surprises we limit the size of the mapped IPC file to this value. Putty currently (0.62) uses 8k, thus 16k should be enough for the foreseeable future. */ #define PUTTY_IPC_MAXLEN 16384 #endif /*HAVE_W32_SYSTEM*/ /* The list of open file descriptors at startup. Note that this list * has been allocated using the standard malloc. */ #ifndef HAVE_W32_SYSTEM static int *startup_fd_list; #endif /* The signal mask at startup and a flag telling whether it is valid. */ #ifdef HAVE_SIGPROCMASK static sigset_t startup_signal_mask; static int startup_signal_mask_valid; #endif /* Flag to indicate that a shutdown was requested. */ static int shutdown_pending; /* Counter for the currently running own socket checks. */ static int check_own_socket_running; /* Flags to indicate that check_own_socket shall not be called. */ static int disable_check_own_socket; /* Flag indicating that we are in supervised mode. */ static int is_supervised; /* Flag to inhibit socket removal in cleanup. */ static int inhibit_socket_removal; /* It is possible that we are currently running under setuid permissions */ static int maybe_setuid = 1; /* Name of the communication socket used for native gpg-agent requests. The second variable is either NULL or a malloced string with the real socket name in case it has been redirected. */ static char *socket_name; static char *redir_socket_name; /* Name of the optional extra socket used for native gpg-agent requests. */ static char *socket_name_extra; static char *redir_socket_name_extra; /* Name of the optional browser socket used for native gpg-agent requests. */ static char *socket_name_browser; static char *redir_socket_name_browser; /* Name of the communication socket used for ssh-agent protocol. */ static char *socket_name_ssh; static char *redir_socket_name_ssh; /* We need to keep track of the server's nonces (these are dummies for POSIX systems). */ static assuan_sock_nonce_t socket_nonce; static assuan_sock_nonce_t socket_nonce_extra; static assuan_sock_nonce_t socket_nonce_browser; static assuan_sock_nonce_t socket_nonce_ssh; /* Value for the listen() backlog argument. We use the same value for * all sockets - 64 is on current Linux half of the default maximum. * Let's try this as default. Change at runtime with --listen-backlog. */ static int listen_backlog = 64; /* Default values for options passed to the pinentry. */ static char *default_display; static char *default_ttyname; static char *default_ttytype; static char *default_lc_ctype; static char *default_lc_messages; static char *default_xauthority; -/* Name of a config file, which will be reread on a HUP if it is not NULL. */ +/* Name of a config file which was last read on startup or if missing + * the name of the standard config file. Any value here enabled the + * rereading of the standard config files on SIGHUP. */ static char *config_filename; /* Helper to implement --debug-level */ static const char *debug_level; /* Keep track of the current log file so that we can avoid updating the log file after a SIGHUP if it didn't changed. Malloced. */ static char *current_logfile; /* The handle_tick() function may test whether a parent is still * running. We record the PID of the parent here or -1 if it should * be watched. */ static pid_t parent_pid = (pid_t)(-1); /* This flag is true if the inotify mechanism for detecting the * removal of the homedir is active. This flag is used to disable the * alternative but portable stat based check. */ static int have_homedir_inotify; /* Depending on how gpg-agent was started, the homedir inotify watch * may not be reliable. This flag is set if we assume that inotify * works reliable. */ static int reliable_homedir_inotify; /* Number of active connections. */ static int active_connections; /* This object is used to dispatch progress messages from Libgcrypt to * the right thread. Given that we will have at max only a few dozen * connections at a time, using a linked list is the easiest way to * handle this. */ struct progress_dispatch_s { struct progress_dispatch_s *next; /* The control object of the connection. If this is NULL no * connection is associated with this item and it is free for reuse * by new connections. */ ctrl_t ctrl; /* The thread id of (npth_self) of the connection. */ npth_t tid; /* The callback set by the connection. This is similar to the * Libgcrypt callback but with the control object passed as the * first argument. */ void (*cb)(ctrl_t ctrl, const char *what, int printchar, int current, int total); }; struct progress_dispatch_s *progress_dispatch_list; /* Local prototypes. */ static char *create_socket_name (char *standard_name, int with_homedir); static gnupg_fd_t create_server_socket (char *name, int primary, int cygwin, char **r_redir_name, assuan_sock_nonce_t *nonce); static void create_directories (void); static void agent_libgcrypt_progress_cb (void *data, const char *what, int printchar, int current, int total); static void agent_init_default_ctrl (ctrl_t ctrl); static void agent_deinit_default_ctrl (ctrl_t ctrl); static void handle_connections (gnupg_fd_t listen_fd, gnupg_fd_t listen_fd_extra, gnupg_fd_t listen_fd_browser, gnupg_fd_t listen_fd_ssh); static void check_own_socket (void); static int check_for_running_agent (int silent); /* Pth wrapper function definitions. */ ASSUAN_SYSTEM_NPTH_IMPL; /* Functions. */ /* Allocate a string describing a library version by calling a GETFNC. This function is expected to be called only once. GETFNC is expected to have a semantic like gcry_check_version (). */ static char * make_libversion (const char *libname, const char *(*getfnc)(const char*)) { const char *s; char *result; if (maybe_setuid) { gcry_control (GCRYCTL_INIT_SECMEM, 0, 0); /* Drop setuid. */ maybe_setuid = 0; } s = getfnc (NULL); result = xmalloc (strlen (libname) + 1 + strlen (s) + 1); strcpy (stpcpy (stpcpy (result, libname), " "), s); return result; } /* Return strings describing this program. The case values are described in common/argparse.c:strusage. The values here override the default values given by strusage. */ static const char * my_strusage (int level) { static char *ver_gcry; const char *p; switch (level) { + case 9: p = "GPL-3.0-or-later"; break; case 11: p = "@GPG_AGENT@ (@GNUPG@)"; break; case 13: p = VERSION; break; + case 14: p = GNUPG_DEF_COPYRIGHT_LINE; break; case 17: p = PRINTABLE_OS_NAME; break; /* TRANSLATORS: @EMAIL@ will get replaced by the actual bug reporting address. This is so that we can change the reporting address without breaking the translations. */ case 19: p = _("Please report bugs to <@EMAIL@>.\n"); break; case 20: if (!ver_gcry) ver_gcry = make_libversion ("libgcrypt", gcry_check_version); p = ver_gcry; break; case 1: case 40: p = _("Usage: @GPG_AGENT@ [options] (-h for help)"); break; case 41: p = _("Syntax: @GPG_AGENT@ [options] [command [args]]\n" "Secret key management for @GNUPG@\n"); break; default: p = NULL; } return p; } /* Setup the debugging. With the global variable DEBUG_LEVEL set to NULL only the active debug flags are propagated to the subsystems. With DEBUG_LEVEL set, a specific set of debug flags is set; thus overriding all flags already set. Note that we don't fail here, because it is important to keep gpg-agent running even after re-reading the options due to a SIGHUP. */ static void set_debug (void) { int numok = (debug_level && digitp (debug_level)); int numlvl = numok? atoi (debug_level) : 0; if (!debug_level) ; else if (!strcmp (debug_level, "none") || (numok && numlvl < 1)) opt.debug = 0; else if (!strcmp (debug_level, "basic") || (numok && numlvl <= 2)) opt.debug = DBG_IPC_VALUE; else if (!strcmp (debug_level, "advanced") || (numok && numlvl <= 5)) opt.debug = DBG_IPC_VALUE; else if (!strcmp (debug_level, "expert") || (numok && numlvl <= 8)) opt.debug = (DBG_IPC_VALUE | DBG_CACHE_VALUE); else if (!strcmp (debug_level, "guru") || numok) { opt.debug = ~0; /* Unless the "guru" string has been used we don't want to allow hashing debugging. The rationale is that people tend to select the highest debug value and would then clutter their disk with debug files which may reveal confidential data. */ if (numok) opt.debug &= ~(DBG_HASHING_VALUE); } else { log_error (_("invalid debug-level '%s' given\n"), debug_level); opt.debug = 0; /* Reset debugging, so that prior debug statements won't have an undesired effect. */ } if (opt.debug && !opt.verbose) opt.verbose = 1; if (opt.debug && opt.quiet) opt.quiet = 0; if (opt.debug & DBG_MPI_VALUE) gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 2); if (opt.debug & DBG_CRYPTO_VALUE ) gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 1); gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose); if (opt.debug) parse_debug_flag (NULL, &opt.debug, debug_flags); } /* Helper for cleanup to remove one socket with NAME. REDIR_NAME is the corresponding real name if the socket has been redirected. */ static void remove_socket (char *name, char *redir_name) { if (name && *name) { if (redir_name) name = redir_name; gnupg_remove (name); *name = 0; } } /* Discover which inherited file descriptors correspond to which * services/sockets offered by gpg-agent, using the LISTEN_FDS and * LISTEN_FDNAMES convention. The understood labels are "ssh", * "extra", and "browser". "std" or other labels will be interpreted * as the standard socket. * * This function is designed to log errors when the expected file * descriptors don't make sense, but to do its best to continue to * work even in the face of minor misconfigurations. * * For more information on the LISTEN_FDS convention, see * sd_listen_fds(3) on certain Linux distributions. */ #ifndef HAVE_W32_SYSTEM static void map_supervised_sockets (gnupg_fd_t *r_fd, gnupg_fd_t *r_fd_extra, gnupg_fd_t *r_fd_browser, gnupg_fd_t *r_fd_ssh) { struct { const char *label; int **fdaddr; char **nameaddr; } tbl[] = { { "ssh", &r_fd_ssh, &socket_name_ssh }, { "browser", &r_fd_browser, &socket_name_browser }, { "extra", &r_fd_extra, &socket_name_extra }, { "std", &r_fd, &socket_name } /* (Must be the last item.) */ }; const char *envvar; char **fdnames; int nfdnames; int fd_count; *r_fd = *r_fd_extra = *r_fd_browser = *r_fd_ssh = -1; /* Print a warning if LISTEN_PID does not match outr pid. */ envvar = getenv ("LISTEN_PID"); if (!envvar) log_error ("no LISTEN_PID environment variable found in " "--supervised mode (ignoring)\n"); else if (strtoul (envvar, NULL, 10) != (unsigned long)getpid ()) log_error ("environment variable LISTEN_PID (%lu) does not match" " our pid (%lu) in --supervised mode (ignoring)\n", (unsigned long)strtoul (envvar, NULL, 10), (unsigned long)getpid ()); /* Parse LISTEN_FDNAMES into the array FDNAMES. */ envvar = getenv ("LISTEN_FDNAMES"); if (envvar) { fdnames = strtokenize (envvar, ":"); if (!fdnames) { log_error ("strtokenize failed: %s\n", gpg_strerror (gpg_error_from_syserror ())); agent_exit (1); } for (nfdnames=0; fdnames[nfdnames]; nfdnames++) ; } else { fdnames = NULL; nfdnames = 0; } /* Parse LISTEN_FDS into fd_count or provide a replacement. */ envvar = getenv ("LISTEN_FDS"); if (envvar) fd_count = atoi (envvar); else if (fdnames) { log_error ("no LISTEN_FDS environment variable found in --supervised" " mode (relying on LISTEN_FDNAMES instead)\n"); fd_count = nfdnames; } else { log_error ("no LISTEN_FDS or LISTEN_FDNAMES environment variables " "found in --supervised mode" " (assuming 1 active descriptor)\n"); fd_count = 1; } if (fd_count < 1) { log_error ("--supervised mode expects at least one file descriptor" " (was told %d, carrying on as though it were 1)\n", fd_count); fd_count = 1; } /* Assign the descriptors to the return values. */ if (!fdnames) { struct stat statbuf; if (fd_count != 1) log_error ("no LISTEN_FDNAMES and LISTEN_FDS (%d) != 1" " in --supervised mode." " (ignoring all sockets but the first one)\n", fd_count); if (fstat (3, &statbuf) == -1 && errno ==EBADF) log_fatal ("file descriptor 3 must be valid in --supervised mode" " if LISTEN_FDNAMES is not set\n"); *r_fd = 3; socket_name = gnupg_get_socket_name (3); } else if (fd_count != nfdnames) { log_fatal ("number of items in LISTEN_FDNAMES (%d) does not match " "LISTEN_FDS (%d) in --supervised mode\n", nfdnames, fd_count); } else { int i, j, fd; char *name; for (i = 0; i < nfdnames; i++) { for (j = 0; j < DIM (tbl); j++) { if (!strcmp (fdnames[i], tbl[j].label) || j == DIM(tbl)-1) { fd = 3 + i; if (**tbl[j].fdaddr == -1) { name = gnupg_get_socket_name (fd); if (name) { **tbl[j].fdaddr = fd; *tbl[j].nameaddr = name; log_info ("using fd %d for %s socket (%s)\n", fd, tbl[j].label, name); } else { log_error ("cannot listen on fd %d for %s socket\n", fd, tbl[j].label); close (fd); } } else { log_error ("cannot listen on more than one %s socket\n", tbl[j].label); close (fd); } break; } } } } xfree (fdnames); } #endif /*!HAVE_W32_SYSTEM*/ /* Cleanup code for this program. This is either called has an atexit handler or directly. */ static void cleanup (void) { static int done; if (done) return; done = 1; deinitialize_module_cache (); if (!is_supervised && !inhibit_socket_removal) { remove_socket (socket_name, redir_socket_name); if (opt.extra_socket > 1) remove_socket (socket_name_extra, redir_socket_name_extra); if (opt.browser_socket > 1) remove_socket (socket_name_browser, redir_socket_name_browser); remove_socket (socket_name_ssh, redir_socket_name_ssh); } } /* Handle options which are allowed to be reset after program start. Return true when the current option in PARGS could be handled and false if not. As a special feature, passing a value of NULL for PARGS, resets the options to the default. REREAD should be set true if it is not the initial option parsing. */ static int -parse_rereadable_options (ARGPARSE_ARGS *pargs, int reread) +parse_rereadable_options (gpgrt_argparse_t *pargs, int reread) { int i; if (!pargs) { /* reset mode */ opt.quiet = 0; opt.verbose = 0; opt.debug = 0; opt.no_grab = 1; opt.debug_pinentry = 0; opt.pinentry_program = NULL; opt.pinentry_touch_file = NULL; xfree (opt.pinentry_invisible_char); opt.pinentry_invisible_char = NULL; opt.pinentry_timeout = 0; opt.scdaemon_program = NULL; opt.def_cache_ttl = DEFAULT_CACHE_TTL; opt.def_cache_ttl_ssh = DEFAULT_CACHE_TTL_SSH; opt.max_cache_ttl = MAX_CACHE_TTL; opt.max_cache_ttl_ssh = MAX_CACHE_TTL_SSH; opt.enforce_passphrase_constraints = 0; opt.min_passphrase_len = MIN_PASSPHRASE_LEN; opt.min_passphrase_nonalpha = MIN_PASSPHRASE_NONALPHA; opt.check_passphrase_pattern = NULL; opt.max_passphrase_days = MAX_PASSPHRASE_DAYS; opt.enable_passphrase_history = 0; opt.enable_extended_key_format = 1; opt.ignore_cache_for_signing = 0; opt.allow_mark_trusted = 1; opt.allow_external_cache = 1; opt.allow_loopback_pinentry = 1; opt.allow_emacs_pinentry = 0; opt.disable_scdaemon = 0; disable_check_own_socket = 0; /* Note: When changing the next line, change also gpgconf_list. */ opt.ssh_fingerprint_digest = GCRY_MD_MD5; opt.s2k_count = 0; set_s2k_calibration_time (0); /* Set to default. */ return 1; } switch (pargs->r_opt) { case oQuiet: opt.quiet = 1; break; case oVerbose: opt.verbose++; break; case oDebug: parse_debug_flag (pargs->r.ret_str, &opt.debug, debug_flags); break; case oDebugAll: opt.debug = ~0; break; case oDebugLevel: debug_level = pargs->r.ret_str; break; case oDebugPinentry: opt.debug_pinentry = 1; break; case oLogFile: if (!reread) return 0; /* not handled */ if (!current_logfile || !pargs->r.ret_str || strcmp (current_logfile, pargs->r.ret_str)) { log_set_file (pargs->r.ret_str); xfree (current_logfile); current_logfile = xtrystrdup (pargs->r.ret_str); } break; case oNoGrab: opt.no_grab |= 1; break; case oGrab: opt.no_grab |= 2; break; case oPinentryProgram: opt.pinentry_program = pargs->r.ret_str; break; case oPinentryTouchFile: opt.pinentry_touch_file = pargs->r.ret_str; break; case oPinentryInvisibleChar: xfree (opt.pinentry_invisible_char); opt.pinentry_invisible_char = xtrystrdup (pargs->r.ret_str); break; break; case oPinentryTimeout: opt.pinentry_timeout = pargs->r.ret_ulong; break; case oScdaemonProgram: opt.scdaemon_program = pargs->r.ret_str; break; case oDisableScdaemon: opt.disable_scdaemon = 1; break; case oDisableCheckOwnSocket: disable_check_own_socket = 1; break; case oDefCacheTTL: opt.def_cache_ttl = pargs->r.ret_ulong; break; case oDefCacheTTLSSH: opt.def_cache_ttl_ssh = pargs->r.ret_ulong; break; case oMaxCacheTTL: opt.max_cache_ttl = pargs->r.ret_ulong; break; case oMaxCacheTTLSSH: opt.max_cache_ttl_ssh = pargs->r.ret_ulong; break; case oEnforcePassphraseConstraints: opt.enforce_passphrase_constraints=1; break; case oMinPassphraseLen: opt.min_passphrase_len = pargs->r.ret_ulong; break; case oMinPassphraseNonalpha: opt.min_passphrase_nonalpha = pargs->r.ret_ulong; break; case oCheckPassphrasePattern: opt.check_passphrase_pattern = pargs->r.ret_str; break; case oMaxPassphraseDays: opt.max_passphrase_days = pargs->r.ret_ulong; break; case oEnablePassphraseHistory: opt.enable_passphrase_history = 1; break; case oEnableExtendedKeyFormat: opt.enable_extended_key_format = 2; break; case oDisableExtendedKeyFormat: if (opt.enable_extended_key_format != 2) opt.enable_extended_key_format = 0; break; case oIgnoreCacheForSigning: opt.ignore_cache_for_signing = 1; break; case oAllowMarkTrusted: opt.allow_mark_trusted = 1; break; case oNoAllowMarkTrusted: opt.allow_mark_trusted = 0; break; case oAllowPresetPassphrase: opt.allow_preset_passphrase = 1; break; case oAllowLoopbackPinentry: opt.allow_loopback_pinentry = 1; break; case oNoAllowLoopbackPinentry: opt.allow_loopback_pinentry = 0; break; case oNoAllowExternalCache: opt.allow_external_cache = 0; break; case oAllowEmacsPinentry: opt.allow_emacs_pinentry = 1; break; case oSSHFingerprintDigest: i = gcry_md_map_name (pargs->r.ret_str); if (!i) log_error (_("selected digest algorithm is invalid\n")); else opt.ssh_fingerprint_digest = i; break; case oS2KCount: opt.s2k_count = pargs->r.ret_ulong; break; case oS2KCalibration: set_s2k_calibration_time (pargs->r.ret_ulong); break; case oNoop: break; default: return 0; /* not handled */ } return 1; /* handled */ } /* Fixup some options after all have been processed. */ static void finalize_rereadable_options (void) { /* Hack to allow --grab to override --no-grab. */ if ((opt.no_grab & 2)) opt.no_grab = 0; } static void thread_init_once (void) { static int npth_initialized = 0; if (!npth_initialized) { npth_initialized++; npth_init (); } gpgrt_set_syscall_clamp (npth_unprotect, npth_protect); /* Now that we have set the syscall clamp we need to tell Libgcrypt * that it should get them from libgpg-error. Note that Libgcrypt * has already been initialized but at that point nPth was not * initialized and thus Libgcrypt could not set its system call * clamp. */ #if GCRYPT_VERSION_NUMBER >= 0x010800 /* 1.8.0 */ gcry_control (GCRYCTL_REINIT_SYSCALL_CLAMP, 0, 0); #endif } static void initialize_modules (void) { thread_init_once (); assuan_set_system_hooks (ASSUAN_SYSTEM_NPTH); initialize_module_cache (); initialize_module_call_pinentry (); initialize_module_call_scd (); initialize_module_trustlist (); } /* The main entry point. */ int -main (int argc, char **argv ) +main (int argc, char **argv) { - ARGPARSE_ARGS pargs; + gpgrt_argparse_t pargs; int orig_argc; char **orig_argv; - FILE *configfp = NULL; - char *configname = NULL; + char *last_configname = NULL; + const char *configname = NULL; + int debug_argparser = 0; const char *shell; - unsigned configlineno; - int parse_debug = 0; - int default_config =1; int pipe_server = 0; int is_daemon = 0; int nodetach = 0; int csh_style = 0; char *logfile = NULL; int debug_wait = 0; int gpgconf_list = 0; gpg_error_t err; struct assuan_malloc_hooks malloc_hooks; early_system_init (); /* Before we do anything else we save the list of currently open file descriptors and the signal mask. This info is required to do the exec call properly. We don't need it on Windows. */ #ifndef HAVE_W32_SYSTEM startup_fd_list = get_all_open_fds (); #endif /*!HAVE_W32_SYSTEM*/ #ifdef HAVE_SIGPROCMASK if (!sigprocmask (SIG_UNBLOCK, NULL, &startup_signal_mask)) startup_signal_mask_valid = 1; #endif /*HAVE_SIGPROCMASK*/ /* Set program name etc. */ - set_strusage (my_strusage); + gpgrt_set_strusage (my_strusage); gcry_control (GCRYCTL_SUSPEND_SECMEM_WARN); /* Please note that we may running SUID(ROOT), so be very CAREFUL when adding any stuff between here and the call to INIT_SECMEM() somewhere after the option parsing */ log_set_prefix (GPG_AGENT_NAME, GPGRT_LOG_WITH_PREFIX|GPGRT_LOG_WITH_PID); /* Make sure that our subsystems are ready. */ i18n_init (); init_common_subsystems (&argc, &argv); malloc_hooks.malloc = gcry_malloc; malloc_hooks.realloc = gcry_realloc; malloc_hooks.free = gcry_free; assuan_set_malloc_hooks (&malloc_hooks); assuan_set_gpg_err_source (GPG_ERR_SOURCE_DEFAULT); assuan_sock_init (); assuan_sock_set_system_hooks (ASSUAN_SYSTEM_NPTH); setup_libassuan_logging (&opt.debug, NULL); setup_libgcrypt_logging (); gcry_control (GCRYCTL_USE_SECURE_RNDPOOL); gcry_set_progress_handler (agent_libgcrypt_progress_cb, NULL); disable_core_dumps (); /* Set default options. */ parse_rereadable_options (NULL, 0); /* Reset them to default values. */ shell = getenv ("SHELL"); if (shell && strlen (shell) >= 3 && !strcmp (shell+strlen (shell)-3, "csh") ) csh_style = 1; /* Record some of the original environment strings. */ { const char *s; int idx; static const char *names[] = { "DISPLAY", "TERM", "XAUTHORITY", "PINENTRY_USER_DATA", NULL }; err = 0; opt.startup_env = session_env_new (); if (!opt.startup_env) err = gpg_error_from_syserror (); for (idx=0; !err && names[idx]; idx++) { s = getenv (names[idx]); if (s) err = session_env_setenv (opt.startup_env, names[idx], s); } if (!err) { s = gnupg_ttyname (0); if (s) err = session_env_setenv (opt.startup_env, "GPG_TTY", s); } if (err) log_fatal ("error recording startup environment: %s\n", gpg_strerror (err)); /* Fixme: Better use the locale function here. */ opt.startup_lc_ctype = getenv ("LC_CTYPE"); if (opt.startup_lc_ctype) opt.startup_lc_ctype = xstrdup (opt.startup_lc_ctype); opt.startup_lc_messages = getenv ("LC_MESSAGES"); if (opt.startup_lc_messages) opt.startup_lc_messages = xstrdup (opt.startup_lc_messages); } /* Check whether we have a config file on the commandline */ orig_argc = argc; orig_argv = argv; pargs.argc = &argc; pargs.argv = &argv; - pargs.flags= 1|(1<<6); /* do not remove the args, ignore version */ - while (arg_parse( &pargs, opts)) - { - if (pargs.r_opt == oDebug || pargs.r_opt == oDebugAll) - parse_debug++; - else if (pargs.r_opt == oOptions) - { /* yes there is one, so we do not try the default one, but - read the option file when it is encountered at the - commandline */ - default_config = 0; - } - else if (pargs.r_opt == oNoOptions) - default_config = 0; /* --no-options */ - else if (pargs.r_opt == oHomedir) + pargs.flags= (ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); + while (gpgrt_argparse (NULL, &pargs, opts)) + { + switch (pargs.r_opt) + { + case oDebug: + case oDebugAll: + debug_argparser++; + break; + + case oHomedir: gnupg_set_homedir (pargs.r.ret_str); - else if (pargs.r_opt == oDebugQuickRandom) - { - gcry_control (GCRYCTL_ENABLE_QUICK_RANDOM, 0); - } + break; + case oDebugQuickRandom: + gcry_control (GCRYCTL_ENABLE_QUICK_RANDOM, 0); + break; + } } + /* Reset the flags. */ + pargs.flags &= ~(ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); /* Initialize the secure memory. */ gcry_control (GCRYCTL_INIT_SECMEM, SECMEM_BUFFER_SIZE, 0); maybe_setuid = 0; /* - Now we are now working under our real uid - */ + * Now we are now working under our real uid + */ - if (default_config) - configname = make_filename (gnupg_homedir (), - GPG_AGENT_NAME EXTSEP_S "conf", NULL); + /* The configuraton directories for use by gpgrt_argparser. */ + gpgrt_set_confdir (GPGRT_CONFDIR_SYS, gnupg_sysconfdir ()); + gpgrt_set_confdir (GPGRT_CONFDIR_USER, gnupg_homedir ()); argc = orig_argc; argv = orig_argv; pargs.argc = &argc; pargs.argv = &argv; - pargs.flags= 1; /* do not remove the args */ - next_pass: - if (configname) + /* We are re-using the struct, thus the reset flag. We OR the + * flags so that the internal intialized flag won't be cleared. */ + pargs.flags |= (ARGPARSE_FLAG_RESET + | ARGPARSE_FLAG_KEEP + | ARGPARSE_FLAG_SYS + | ARGPARSE_FLAG_USER); + + while (gpgrt_argparser (&pargs, opts, GPG_AGENT_NAME EXTSEP_S "conf")) { - configlineno = 0; - configfp = fopen (configname, "r"); - if (!configfp) + if (pargs.r_opt == ARGPARSE_CONFFILE) { - if (default_config) + if (debug_argparser) + log_info (_("reading options from '%s'\n"), + pargs.r_type? pargs.r.ret_str: "[cmdline]"); + if (pargs.r_type) { - if( parse_debug ) - log_info (_("Note: no default option file '%s'\n"), - configname ); - /* Save the default conf file name so that - reread_configuration is able to test whether the - config file has been created in the meantime. */ - xfree (config_filename); - config_filename = configname; - configname = NULL; - } + xfree (last_configname); + last_configname = xstrdup (pargs.r.ret_str); + configname = last_configname; + } else - { - log_error (_("option file '%s': %s\n"), - configname, strerror(errno) ); - exit(2); - } - xfree (configname); - configname = NULL; - } - if (parse_debug && configname ) - log_info (_("reading options from '%s'\n"), configname ); - default_config = 0; - } - - while (optfile_parse( configfp, configname, &configlineno, &pargs, opts) ) - { + configname = NULL; + continue; + } if (parse_rereadable_options (&pargs, 0)) continue; /* Already handled */ switch (pargs.r_opt) { case aGPGConfList: gpgconf_list = 1; break; case aGPGConfTest: gpgconf_list = 2; break; case aUseStandardSocketP: gpgconf_list = 3; break; case oBatch: opt.batch=1; break; case oDebugWait: debug_wait = pargs.r.ret_int; break; - case oOptions: - /* config files may not be nested (silently ignore them) */ - if (!configfp) - { - xfree(configname); - configname = xstrdup(pargs.r.ret_str); - goto next_pass; - } - break; case oNoGreeting: /* Dummy option. */ break; case oNoVerbose: opt.verbose = 0; break; - case oNoOptions: break; /* no-options */ case oHomedir: gnupg_set_homedir (pargs.r.ret_str); break; case oNoDetach: nodetach = 1; break; case oLogFile: logfile = pargs.r.ret_str; break; case oCsh: csh_style = 1; break; case oSh: csh_style = 0; break; case oServer: pipe_server = 1; break; case oDaemon: is_daemon = 1; break; case oSupervised: is_supervised = 1; break; case oDisplay: default_display = xstrdup (pargs.r.ret_str); break; case oTTYname: default_ttyname = xstrdup (pargs.r.ret_str); break; case oTTYtype: default_ttytype = xstrdup (pargs.r.ret_str); break; case oLCctype: default_lc_ctype = xstrdup (pargs.r.ret_str); break; case oLCmessages: default_lc_messages = xstrdup (pargs.r.ret_str); break; case oXauthority: default_xauthority = xstrdup (pargs.r.ret_str); break; case oUseStandardSocket: case oNoUseStandardSocket: - obsolete_option (configname, configlineno, "use-standard-socket"); + obsolete_option (configname, pargs.lineno, "use-standard-socket"); break; case oFakedSystemTime: { time_t faked_time = isotime2epoch (pargs.r.ret_str); if (faked_time == (time_t)(-1)) faked_time = (time_t)strtoul (pargs.r.ret_str, NULL, 10); gnupg_set_time (faked_time, 0); } break; case oKeepTTY: opt.keep_tty = 1; break; case oKeepDISPLAY: opt.keep_display = 1; break; case oSSHSupport: ssh_support = 1; break; case oPuttySupport: # ifdef HAVE_W32_SYSTEM putty_support = 1; # endif break; case oExtraSocket: opt.extra_socket = 1; /* (1 = points into argv) */ socket_name_extra = pargs.r.ret_str; break; case oBrowserSocket: opt.browser_socket = 1; /* (1 = points into argv) */ socket_name_browser = pargs.r.ret_str; break; case oAutoExpandSecmem: /* Try to enable this option. It will officially only be * supported by Libgcrypt 1.9 but 1.8.2 already supports it * on the quiet and thus we use the numeric value value. */ gcry_control (78 /*GCRYCTL_AUTO_EXPAND_SECMEM*/, (unsigned int)pargs.r.ret_ulong, 0); break; case oListenBacklog: listen_backlog = pargs.r.ret_int; break; case oDebugQuickRandom: /* Only used by the first stage command line parser. */ break; case oWriteEnvFile: - obsolete_option (configname, configlineno, "write-env-file"); + obsolete_option (configname, pargs.lineno, "write-env-file"); break; - default : pargs.err = configfp? 1:2; break; + default: + if (configname) + pargs.err = ARGPARSE_PRINT_WARNING; + else + pargs.err = ARGPARSE_PRINT_ERROR; + break; } } - if (configfp) + + gpgrt_argparse (NULL, &pargs, NULL); /* Release internal state. */ + + if (!last_configname) + config_filename = gpgrt_fnameconcat (gnupg_homedir (), + GPG_AGENT_NAME EXTSEP_S "conf", + NULL); + else { - fclose( configfp ); - configfp = NULL; - /* Keep a copy of the name so that it can be read on SIGHUP. */ - if (config_filename != configname) - { - xfree (config_filename); - config_filename = configname; - } - configname = NULL; - goto next_pass; + config_filename = last_configname; + last_configname = NULL; } - xfree (configname); - configname = NULL; if (log_get_errorcount(0)) exit(2); finalize_rereadable_options (); /* Print a warning if an argument looks like an option. */ if (!opt.quiet && !(pargs.flags & ARGPARSE_FLAG_STOP_SEEN)) { int i; for (i=0; i < argc; i++) if (argv[i][0] == '-' && argv[i][1] == '-') log_info (_("Note: '%s' is not considered an option\n"), argv[i]); } #ifdef ENABLE_NLS /* gpg-agent usually does not output any messages because it runs in the background. For log files it is acceptable to have messages always encoded in utf-8. We switch here to utf-8, so that commands like --help still give native messages. It is far easier to switch only once instead of for every message and it actually helps when more then one thread is active (avoids an extra copy step). */ bind_textdomain_codeset (PACKAGE_GT, "UTF-8"); #endif if (!pipe_server && !is_daemon && !gpgconf_list && !is_supervised) { /* We have been called without any command and thus we merely check whether an agent is already running. We do this right here so that we don't clobber a logfile with this check but print the status directly to stderr. */ opt.debug = 0; set_debug (); check_for_running_agent (0); agent_exit (0); } if (is_supervised) ; else if (!opt.extra_socket) opt.extra_socket = 1; else if (socket_name_extra && (!strcmp (socket_name_extra, "none") || !strcmp (socket_name_extra, "/dev/null"))) { /* User requested not to create this socket. */ opt.extra_socket = 0; socket_name_extra = NULL; } if (is_supervised) ; else if (!opt.browser_socket) opt.browser_socket = 1; else if (socket_name_browser && (!strcmp (socket_name_browser, "none") || !strcmp (socket_name_browser, "/dev/null"))) { /* User requested not to create this socket. */ opt.browser_socket = 0; socket_name_browser = NULL; } set_debug (); if (atexit (cleanup)) { log_error ("atexit failed\n"); cleanup (); exit (1); } /* Try to create missing directories. */ create_directories (); if (debug_wait && pipe_server) { thread_init_once (); log_debug ("waiting for debugger - my pid is %u .....\n", (unsigned int)getpid()); gnupg_sleep (debug_wait); log_debug ("... okay\n"); } if (gpgconf_list == 3) { /* We now use the standard socket always - return true for backward compatibility. */ agent_exit (0); } else if (gpgconf_list == 2) agent_exit (0); else if (gpgconf_list) { - char *filename; char *filename_esc; /* List options and default values in the GPG Conf format. */ - filename = make_filename (gnupg_homedir (), - GPG_AGENT_NAME EXTSEP_S "conf", NULL); - filename_esc = percent_escape (filename, NULL); + filename_esc = percent_escape (config_filename, NULL); es_printf ("%s-%s.conf:%lu:\"%s\n", GPGCONF_NAME, GPG_AGENT_NAME, GC_OPT_FLAG_DEFAULT, filename_esc); - xfree (filename); xfree (filename_esc); es_printf ("verbose:%lu:\n" "quiet:%lu:\n" "debug-level:%lu:\"none:\n" "log-file:%lu:\n", GC_OPT_FLAG_NONE|GC_OPT_FLAG_RUNTIME, GC_OPT_FLAG_NONE|GC_OPT_FLAG_RUNTIME, GC_OPT_FLAG_DEFAULT|GC_OPT_FLAG_RUNTIME, GC_OPT_FLAG_NONE|GC_OPT_FLAG_RUNTIME ); es_printf ("default-cache-ttl:%lu:%d:\n", GC_OPT_FLAG_DEFAULT|GC_OPT_FLAG_RUNTIME, DEFAULT_CACHE_TTL ); es_printf ("default-cache-ttl-ssh:%lu:%d:\n", GC_OPT_FLAG_DEFAULT|GC_OPT_FLAG_RUNTIME, DEFAULT_CACHE_TTL_SSH ); es_printf ("max-cache-ttl:%lu:%d:\n", GC_OPT_FLAG_DEFAULT|GC_OPT_FLAG_RUNTIME, MAX_CACHE_TTL ); es_printf ("max-cache-ttl-ssh:%lu:%d:\n", GC_OPT_FLAG_DEFAULT|GC_OPT_FLAG_RUNTIME, MAX_CACHE_TTL_SSH ); es_printf ("enforce-passphrase-constraints:%lu:\n", GC_OPT_FLAG_NONE|GC_OPT_FLAG_RUNTIME); es_printf ("min-passphrase-len:%lu:%d:\n", GC_OPT_FLAG_DEFAULT|GC_OPT_FLAG_RUNTIME, MIN_PASSPHRASE_LEN ); es_printf ("min-passphrase-nonalpha:%lu:%d:\n", GC_OPT_FLAG_DEFAULT|GC_OPT_FLAG_RUNTIME, MIN_PASSPHRASE_NONALPHA); es_printf ("check-passphrase-pattern:%lu:\n", GC_OPT_FLAG_DEFAULT|GC_OPT_FLAG_RUNTIME); es_printf ("max-passphrase-days:%lu:%d:\n", GC_OPT_FLAG_DEFAULT|GC_OPT_FLAG_RUNTIME, MAX_PASSPHRASE_DAYS); es_printf ("enable-passphrase-history:%lu:\n", GC_OPT_FLAG_NONE|GC_OPT_FLAG_RUNTIME); es_printf ("no-grab:%lu:\n", GC_OPT_FLAG_NONE|GC_OPT_FLAG_RUNTIME); es_printf ("ignore-cache-for-signing:%lu:\n", GC_OPT_FLAG_NONE|GC_OPT_FLAG_RUNTIME); es_printf ("no-allow-external-cache:%lu:\n", GC_OPT_FLAG_NONE|GC_OPT_FLAG_RUNTIME); es_printf ("no-allow-mark-trusted:%lu:\n", GC_OPT_FLAG_NONE|GC_OPT_FLAG_RUNTIME); es_printf ("disable-scdaemon:%lu:\n", GC_OPT_FLAG_NONE|GC_OPT_FLAG_RUNTIME); es_printf ("enable-ssh-support:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("ssh-fingerprint-digest:%lu:\"%s:\n", GC_OPT_FLAG_DEFAULT|GC_OPT_FLAG_RUNTIME, "md5"); #ifdef HAVE_W32_SYSTEM es_printf ("enable-putty-support:%lu:\n", GC_OPT_FLAG_NONE); #endif es_printf ("no-allow-loopback-pinentry:%lu:\n", GC_OPT_FLAG_NONE|GC_OPT_FLAG_RUNTIME); es_printf ("allow-emacs-pinentry:%lu:\n", GC_OPT_FLAG_NONE|GC_OPT_FLAG_RUNTIME); es_printf ("pinentry-timeout:%lu:0:\n", GC_OPT_FLAG_DEFAULT|GC_OPT_FLAG_RUNTIME); es_printf ("grab:%lu:\n", GC_OPT_FLAG_NONE|GC_OPT_FLAG_RUNTIME); agent_exit (0); } /* Now start with logging to a file if this is desired. */ if (logfile) { log_set_file (logfile); log_set_prefix (NULL, (GPGRT_LOG_WITH_PREFIX | GPGRT_LOG_WITH_TIME | GPGRT_LOG_WITH_PID)); current_logfile = xstrdup (logfile); } /* Make sure that we have a default ttyname. */ if (!default_ttyname && gnupg_ttyname (1)) default_ttyname = xstrdup (gnupg_ttyname (1)); if (!default_ttytype && getenv ("TERM")) default_ttytype = xstrdup (getenv ("TERM")); if (pipe_server) { /* This is the simple pipe based server */ ctrl_t ctrl; initialize_modules (); ctrl = xtrycalloc (1, sizeof *ctrl); if (!ctrl) { log_error ("error allocating connection control data: %s\n", strerror (errno) ); agent_exit (1); } ctrl->session_env = session_env_new (); if (!ctrl->session_env) { log_error ("error allocating session environment block: %s\n", strerror (errno) ); xfree (ctrl); agent_exit (1); } agent_init_default_ctrl (ctrl); start_command_handler (ctrl, GNUPG_INVALID_FD, GNUPG_INVALID_FD); agent_deinit_default_ctrl (ctrl); xfree (ctrl); } else if (is_supervised) { #ifndef HAVE_W32_SYSTEM gnupg_fd_t fd, fd_extra, fd_browser, fd_ssh; initialize_modules (); /* when supervised and sending logs to stderr, the process supervisor should handle log entry metadata (pid, name, timestamp) */ if (!logfile) log_set_prefix (NULL, 0); log_info ("%s %s starting in supervised mode.\n", - strusage(11), strusage(13) ); + gpgrt_strusage(11), gpgrt_strusage(13) ); /* See below in "regular server mode" on why we remove certain * envvars. */ if (!opt.keep_display) gnupg_unsetenv ("DISPLAY"); gnupg_unsetenv ("INSIDE_EMACS"); /* Virtually create the sockets. Note that we use -1 here * because the whole thing works only on Unix. */ map_supervised_sockets (&fd, &fd_extra, &fd_browser, &fd_ssh); if (fd == -1) log_fatal ("no standard socket provided\n"); #ifdef HAVE_SIGPROCMASK if (startup_signal_mask_valid) { if (sigprocmask (SIG_SETMASK, &startup_signal_mask, NULL)) log_error ("error restoring signal mask: %s\n", strerror (errno)); } else log_info ("no saved signal mask\n"); #endif /*HAVE_SIGPROCMASK*/ log_info ("listening on: std=%d extra=%d browser=%d ssh=%d\n", fd, fd_extra, fd_browser, fd_ssh); handle_connections (fd, fd_extra, fd_browser, fd_ssh); #endif /*!HAVE_W32_SYSTEM*/ } else if (!is_daemon) ; /* NOTREACHED */ else { /* Regular server mode */ gnupg_fd_t fd; gnupg_fd_t fd_extra = GNUPG_INVALID_FD; gnupg_fd_t fd_browser = GNUPG_INVALID_FD; gnupg_fd_t fd_ssh = GNUPG_INVALID_FD; #ifndef HAVE_W32_SYSTEM pid_t pid; #endif /* Remove the DISPLAY variable so that a pinentry does not default to a specific display. There is still a default display when gpg-agent was started using --display or a client requested this using an OPTION command. Note, that we don't do this when running in reverse daemon mode (i.e. when exec the program given as arguments). */ #ifndef HAVE_W32_SYSTEM if (!opt.keep_display && !argc) gnupg_unsetenv ("DISPLAY"); #endif /* Remove the INSIDE_EMACS variable so that a pinentry does not always try to interact with Emacs. The variable is set when a client requested this using an OPTION command. */ gnupg_unsetenv ("INSIDE_EMACS"); /* Create the sockets. */ socket_name = create_socket_name (GPG_AGENT_SOCK_NAME, 1); fd = create_server_socket (socket_name, 1, 0, &redir_socket_name, &socket_nonce); if (opt.extra_socket) { if (socket_name_extra) socket_name_extra = create_socket_name (socket_name_extra, 0); else socket_name_extra = create_socket_name /**/ (GPG_AGENT_EXTRA_SOCK_NAME, 1); opt.extra_socket = 2; /* Indicate that it has been malloced. */ fd_extra = create_server_socket (socket_name_extra, 0, 0, &redir_socket_name_extra, &socket_nonce_extra); } if (opt.browser_socket) { if (socket_name_browser) socket_name_browser = create_socket_name (socket_name_browser, 0); else socket_name_browser= create_socket_name /**/ (GPG_AGENT_BROWSER_SOCK_NAME, 1); opt.browser_socket = 2; /* Indicate that it has been malloced. */ fd_browser = create_server_socket (socket_name_browser, 0, 0, &redir_socket_name_browser, &socket_nonce_browser); } socket_name_ssh = create_socket_name (GPG_AGENT_SSH_SOCK_NAME, 1); fd_ssh = create_server_socket (socket_name_ssh, 0, 1, &redir_socket_name_ssh, &socket_nonce_ssh); /* If we are going to exec a program in the parent, we record the PID, so that the child may check whether the program is still alive. */ if (argc) parent_pid = getpid (); fflush (NULL); #ifdef HAVE_W32_SYSTEM (void)csh_style; (void)nodetach; initialize_modules (); #else /*!HAVE_W32_SYSTEM*/ pid = fork (); if (pid == (pid_t)-1) { log_fatal ("fork failed: %s\n", strerror (errno) ); exit (1); } else if (pid) { /* We are the parent */ char *infostr_ssh_sock, *infostr_ssh_valid; /* Close the socket FD. */ close (fd); /* The signal mask might not be correct right now and thus we restore it. That is not strictly necessary but some programs falsely assume a cleared signal mask. */ #ifdef HAVE_SIGPROCMASK if (startup_signal_mask_valid) { if (sigprocmask (SIG_SETMASK, &startup_signal_mask, NULL)) log_error ("error restoring signal mask: %s\n", strerror (errno)); } else log_info ("no saved signal mask\n"); #endif /*HAVE_SIGPROCMASK*/ /* Create the SSH info string if enabled. */ if (ssh_support) { if (asprintf (&infostr_ssh_sock, "SSH_AUTH_SOCK=%s", socket_name_ssh) < 0) { log_error ("out of core\n"); kill (pid, SIGTERM); exit (1); } if (asprintf (&infostr_ssh_valid, "gnupg_SSH_AUTH_SOCK_by=%lu", (unsigned long)getpid()) < 0) { log_error ("out of core\n"); kill (pid, SIGTERM); exit (1); } } *socket_name = 0; /* Don't let cleanup() remove the socket - the child should do this from now on */ if (opt.extra_socket) *socket_name_extra = 0; if (opt.browser_socket) *socket_name_browser = 0; *socket_name_ssh = 0; if (argc) { /* Run the program given on the commandline. */ if (ssh_support && (putenv (infostr_ssh_sock) || putenv (infostr_ssh_valid))) { log_error ("failed to set environment: %s\n", strerror (errno) ); kill (pid, SIGTERM ); exit (1); } /* Close all the file descriptors except the standard ones and those open at startup. We explicitly don't close 0,1,2 in case something went wrong collecting them at startup. */ close_all_fds (3, startup_fd_list); /* Run the command. */ execvp (argv[0], argv); log_error ("failed to run the command: %s\n", strerror (errno)); kill (pid, SIGTERM); exit (1); } else { /* Print the environment string, so that the caller can use shell's eval to set it */ if (csh_style) { if (ssh_support) { *strchr (infostr_ssh_sock, '=') = ' '; es_printf ("setenv %s;\n", infostr_ssh_sock); } } else { if (ssh_support) { es_printf ("%s; export SSH_AUTH_SOCK;\n", infostr_ssh_sock); } } if (ssh_support) { xfree (infostr_ssh_sock); xfree (infostr_ssh_valid); } exit (0); } /*NOTREACHED*/ } /* End parent */ /* This is the child */ initialize_modules (); /* Detach from tty and put process into a new session */ if (!nodetach ) { int i; unsigned int oldflags; /* Close stdin, stdout and stderr unless it is the log stream */ for (i=0; i <= 2; i++) { if (!log_test_fd (i) && i != fd ) { if ( ! close (i) && open ("/dev/null", i? O_WRONLY : O_RDONLY) == -1) { log_error ("failed to open '%s': %s\n", "/dev/null", strerror (errno)); cleanup (); exit (1); } } } if (setsid() == -1) { log_error ("setsid() failed: %s\n", strerror(errno) ); cleanup (); exit (1); } log_get_prefix (&oldflags); log_set_prefix (NULL, oldflags | GPGRT_LOG_RUN_DETACHED); opt.running_detached = 1; /* Unless we are running with a program given on the command * line we can assume that the inotify things works and thus * we can avoid the regular stat calls. */ if (!argc) reliable_homedir_inotify = 1; } { struct sigaction sa; sa.sa_handler = SIG_IGN; sigemptyset (&sa.sa_mask); sa.sa_flags = 0; sigaction (SIGPIPE, &sa, NULL); } #endif /*!HAVE_W32_SYSTEM*/ if (gnupg_chdir (gnupg_daemon_rootdir ())) { log_error ("chdir to '%s' failed: %s\n", gnupg_daemon_rootdir (), strerror (errno)); exit (1); } - log_info ("%s %s started\n", strusage(11), strusage(13) ); + log_info ("%s %s started\n", gpgrt_strusage(11), gpgrt_strusage(13) ); handle_connections (fd, fd_extra, fd_browser, fd_ssh); assuan_sock_close (fd); } return 0; } /* Exit entry point. This function should be called instead of a plain exit. */ void agent_exit (int rc) { /*FIXME: update_random_seed_file();*/ /* We run our cleanup handler because that may close cipher contexts stored in secure memory and thus this needs to be done before we explicitly terminate secure memory. */ cleanup (); #if 1 /* at this time a bit annoying */ if (opt.debug & DBG_MEMSTAT_VALUE) { gcry_control( GCRYCTL_DUMP_MEMORY_STATS ); gcry_control( GCRYCTL_DUMP_RANDOM_STATS ); } if (opt.debug) gcry_control (GCRYCTL_DUMP_SECMEM_STATS ); #endif gcry_control (GCRYCTL_TERM_SECMEM ); rc = rc? rc : log_get_errorcount(0)? 2 : 0; exit (rc); } /* This is our callback function for gcrypt progress messages. It is set once at startup and dispatches progress messages to the corresponding threads of the agent. */ static void agent_libgcrypt_progress_cb (void *data, const char *what, int printchar, int current, int total) { struct progress_dispatch_s *dispatch; npth_t mytid = npth_self (); (void)data; for (dispatch = progress_dispatch_list; dispatch; dispatch = dispatch->next) if (dispatch->ctrl && dispatch->tid == mytid) break; if (dispatch && dispatch->cb) dispatch->cb (dispatch->ctrl, what, printchar, current, total); /* Libgcrypt < 1.8 does not know about nPth and thus when it reads * from /dev/random this will block the process. To mitigate this * problem we yield the thread when Libgcrypt tells us that it needs * more entropy. This way other threads have chance to run. */ #if GCRYPT_VERSION_NUMBER < 0x010800 /* 1.8.0 */ if (what && !strcmp (what, "need_entropy")) { #if GPGRT_VERSION_NUMBER < 0x011900 /* 1.25 */ /* In older gpg-error versions gpgrt_yield is buggy for use with * nPth and thus we need to resort to a sleep call. */ npth_usleep (1000); /* 1ms */ #else gpgrt_yield (); #endif } #endif } /* If a progress dispatcher callback has been associated with the * current connection unregister it. */ static void unregister_progress_cb (void) { struct progress_dispatch_s *dispatch; npth_t mytid = npth_self (); for (dispatch = progress_dispatch_list; dispatch; dispatch = dispatch->next) if (dispatch->ctrl && dispatch->tid == mytid) break; if (dispatch) { dispatch->ctrl = NULL; dispatch->cb = NULL; } } /* Setup a progress callback CB for the current connection. Using a * CB of NULL disables the callback. */ void agent_set_progress_cb (void (*cb)(ctrl_t ctrl, const char *what, int printchar, int current, int total), ctrl_t ctrl) { struct progress_dispatch_s *dispatch, *firstfree; npth_t mytid = npth_self (); firstfree = NULL; for (dispatch = progress_dispatch_list; dispatch; dispatch = dispatch->next) { if (dispatch->ctrl && dispatch->tid == mytid) break; if (!dispatch->ctrl && !firstfree) firstfree = dispatch; } if (!dispatch) /* None allocated: Reuse or allocate a new one. */ { if (firstfree) { dispatch = firstfree; } else if ((dispatch = xtrycalloc (1, sizeof *dispatch))) { dispatch->next = progress_dispatch_list; progress_dispatch_list = dispatch; } else { log_error ("error allocating new progress dispatcher slot: %s\n", gpg_strerror (gpg_error_from_syserror ())); return; } dispatch->ctrl = ctrl; dispatch->tid = mytid; } dispatch->cb = cb; } /* Each thread has its own local variables conveyed by a control structure usually identified by an argument named CTRL. This function is called immediately after allocating the control structure. Its purpose is to setup the default values for that structure. Note that some values may have already been set. */ static void agent_init_default_ctrl (ctrl_t ctrl) { log_assert (ctrl->session_env); /* Note we ignore malloc errors because we can't do much about it and the request will fail anyway shortly after this initialization. */ session_env_setenv (ctrl->session_env, "DISPLAY", default_display); session_env_setenv (ctrl->session_env, "GPG_TTY", default_ttyname); session_env_setenv (ctrl->session_env, "TERM", default_ttytype); session_env_setenv (ctrl->session_env, "XAUTHORITY", default_xauthority); session_env_setenv (ctrl->session_env, "PINENTRY_USER_DATA", NULL); if (ctrl->lc_ctype) xfree (ctrl->lc_ctype); ctrl->lc_ctype = default_lc_ctype? xtrystrdup (default_lc_ctype) : NULL; if (ctrl->lc_messages) xfree (ctrl->lc_messages); ctrl->lc_messages = default_lc_messages? xtrystrdup (default_lc_messages) /**/ : NULL; ctrl->cache_ttl_opt_preset = CACHE_TTL_OPT_PRESET; } /* Release all resources allocated by default in the control structure. This is the counterpart to agent_init_default_ctrl. */ static void agent_deinit_default_ctrl (ctrl_t ctrl) { unregister_progress_cb (); session_env_release (ctrl->session_env); if (ctrl->lc_ctype) xfree (ctrl->lc_ctype); if (ctrl->lc_messages) xfree (ctrl->lc_messages); } /* Because the ssh protocol does not send us information about the current TTY setting, we use this function to use those from startup or those explicitly set. This is also used for the restricted mode where we ignore requests to change the environment. */ gpg_error_t agent_copy_startup_env (ctrl_t ctrl) { gpg_error_t err = 0; int iterator = 0; const char *name, *value; while (!err && (name = session_env_list_stdenvnames (&iterator, NULL))) { if ((value = session_env_getenv (opt.startup_env, name))) err = session_env_setenv (ctrl->session_env, name, value); } if (!err && !ctrl->lc_ctype && opt.startup_lc_ctype) if (!(ctrl->lc_ctype = xtrystrdup (opt.startup_lc_ctype))) err = gpg_error_from_syserror (); if (!err && !ctrl->lc_messages && opt.startup_lc_messages) if (!(ctrl->lc_messages = xtrystrdup (opt.startup_lc_messages))) err = gpg_error_from_syserror (); if (err) log_error ("error setting default session environment: %s\n", gpg_strerror (err)); return err; } /* Reread parts of the configuration. Note, that this function is obviously not thread-safe and should only be called from the PTH signal handler. Fixme: Due to the way the argument parsing works, we create a memory leak here for all string type arguments. There is currently no clean way to tell whether the memory for the argument has been allocated or points into the process's original arguments. Unless we have a mechanism to tell this, we need to live on with this. */ static void reread_configuration (void) { - ARGPARSE_ARGS pargs; - FILE *fp; - unsigned int configlineno = 0; + gpgrt_argparse_t pargs; int dummy; if (!config_filename) return; /* No config file. */ - fp = fopen (config_filename, "r"); - if (!fp) - { - log_info (_("option file '%s': %s\n"), - config_filename, strerror(errno) ); - return; - } - parse_rereadable_options (NULL, 1); /* Start from the default values. */ memset (&pargs, 0, sizeof pargs); dummy = 0; pargs.argc = &dummy; - pargs.flags = 1; /* do not remove the args */ - while (optfile_parse (fp, config_filename, &configlineno, &pargs, opts) ) + pargs.flags = (ARGPARSE_FLAG_KEEP + |ARGPARSE_FLAG_SYS + |ARGPARSE_FLAG_USER); + while (gpgrt_argparser (&pargs, opts, GPG_AGENT_NAME EXTSEP_S "conf") ) { - if (pargs.r_opt < -1) - pargs.err = 1; /* Print a warning. */ + if (pargs.r_opt == ARGPARSE_CONFFILE) + { + log_info (_("reading options from '%s'\n"), + pargs.r_type? pargs.r.ret_str: "[cmdline]"); + } + else if (pargs.r_opt < -1) + pargs.err = ARGPARSE_PRINT_WARNING; else /* Try to parse this option - ignore unchangeable ones. */ parse_rereadable_options (&pargs, 1); } - fclose (fp); + gpgrt_argparse (NULL, &pargs, NULL); /* Release internal state. */ + finalize_rereadable_options (); set_debug (); } /* Return the file name of the socket we are using for native requests. */ const char * get_agent_socket_name (void) { const char *s = socket_name; return (s && *s)? s : NULL; } /* Return the file name of the socket we are using for SSH requests. */ const char * get_agent_ssh_socket_name (void) { const char *s = socket_name_ssh; return (s && *s)? s : NULL; } /* Return the number of active connections. */ int get_agent_active_connection_count (void) { return active_connections; } /* Under W32, this function returns the handle of the scdaemon notification event. Calling it the first time creates that event. */ #if defined(HAVE_W32_SYSTEM) && !defined(HAVE_W32CE_SYSTEM) void * get_agent_scd_notify_event (void) { static HANDLE the_event = INVALID_HANDLE_VALUE; if (the_event == INVALID_HANDLE_VALUE) { HANDLE h, h2; SECURITY_ATTRIBUTES sa = { sizeof (SECURITY_ATTRIBUTES), NULL, TRUE}; /* We need to use a manual reset event object due to the way our w32-pth wait function works: If we would use an automatic reset event we are not able to figure out which handle has been signaled because at the time we single out the signaled handles using WFSO the event has already been reset due to the WFMO. */ h = CreateEvent (&sa, TRUE, FALSE, NULL); if (!h) log_error ("can't create scd notify event: %s\n", w32_strerror (-1) ); else if (!DuplicateHandle (GetCurrentProcess(), h, GetCurrentProcess(), &h2, EVENT_MODIFY_STATE|SYNCHRONIZE, TRUE, 0)) { log_error ("setting synchronize for scd notify event failed: %s\n", w32_strerror (-1) ); CloseHandle (h); } else { CloseHandle (h); the_event = h2; } } return the_event; } #endif /*HAVE_W32_SYSTEM && !HAVE_W32CE_SYSTEM*/ /* Create a name for the socket in the home directory as using STANDARD_NAME. We also check for valid characters as well as against a maximum allowed length for a unix domain socket is done. The function terminates the process in case of an error. Returns: Pointer to an allocated string with the absolute name of the socket used. */ static char * create_socket_name (char *standard_name, int with_homedir) { char *name; if (with_homedir) name = make_filename (gnupg_socketdir (), standard_name, NULL); else name = make_filename (standard_name, NULL); if (strchr (name, PATHSEP_C)) { log_error (("'%s' are not allowed in the socket name\n"), PATHSEP_S); agent_exit (2); } return name; } /* Create a Unix domain socket with NAME. Returns the file descriptor or terminates the process in case of an error. Note that this function needs to be used for the regular socket first (indicated by PRIMARY) and only then for the extra and the ssh sockets. If the socket has been redirected the name of the real socket is stored as a malloced string at R_REDIR_NAME. If CYGWIN is set a Cygwin compatible socket is created (Windows only). */ static gnupg_fd_t create_server_socket (char *name, int primary, int cygwin, char **r_redir_name, assuan_sock_nonce_t *nonce) { struct sockaddr *addr; struct sockaddr_un *unaddr; socklen_t len; gnupg_fd_t fd; int rc; xfree (*r_redir_name); *r_redir_name = NULL; fd = assuan_sock_new (AF_UNIX, SOCK_STREAM, 0); if (fd == ASSUAN_INVALID_FD) { log_error (_("can't create socket: %s\n"), strerror (errno)); *name = 0; /* Inhibit removal of the socket by cleanup(). */ agent_exit (2); } if (cygwin) assuan_sock_set_flag (fd, "cygwin", 1); unaddr = xmalloc (sizeof *unaddr); addr = (struct sockaddr*)unaddr; { int redirected; if (assuan_sock_set_sockaddr_un (name, addr, &redirected)) { if (errno == ENAMETOOLONG) log_error (_("socket name '%s' is too long\n"), name); else log_error ("error preparing socket '%s': %s\n", name, gpg_strerror (gpg_error_from_syserror ())); *name = 0; /* Inhibit removal of the socket by cleanup(). */ xfree (unaddr); agent_exit (2); } if (redirected) { *r_redir_name = xstrdup (unaddr->sun_path); if (opt.verbose) log_info ("redirecting socket '%s' to '%s'\n", name, *r_redir_name); } } len = SUN_LEN (unaddr); rc = assuan_sock_bind (fd, addr, len); /* Our error code mapping on W32CE returns EEXIST thus we also test for this. */ if (rc == -1 && (errno == EADDRINUSE #ifdef HAVE_W32_SYSTEM || errno == EEXIST #endif )) { /* Check whether a gpg-agent is already running. We do this test only if this is the primary socket. For secondary sockets we assume that a test for gpg-agent has already been done and reuse the requested socket. Testing the ssh-socket is not possible because at this point, though we know the new Assuan socket, the Assuan server and thus the ssh-agent server is not yet operational; this would lead to a hang. */ if (primary && !check_for_running_agent (1)) { log_set_prefix (NULL, GPGRT_LOG_WITH_PREFIX); log_set_file (NULL); log_error (_("a gpg-agent is already running - " "not starting a new one\n")); *name = 0; /* Inhibit removal of the socket by cleanup(). */ assuan_sock_close (fd); xfree (unaddr); agent_exit (2); } gnupg_remove (unaddr->sun_path); rc = assuan_sock_bind (fd, addr, len); } if (rc != -1 && (rc=assuan_sock_get_nonce (addr, len, nonce))) log_error (_("error getting nonce for the socket\n")); if (rc == -1) { /* We use gpg_strerror here because it allows us to get strings for some W32 socket error codes. */ log_error (_("error binding socket to '%s': %s\n"), unaddr->sun_path, gpg_strerror (gpg_error_from_syserror ())); assuan_sock_close (fd); *name = 0; /* Inhibit removal of the socket by cleanup(). */ xfree (unaddr); agent_exit (2); } if (gnupg_chmod (unaddr->sun_path, "-rwx")) log_error (_("can't set permissions of '%s': %s\n"), unaddr->sun_path, strerror (errno)); if (listen (FD2INT(fd), listen_backlog ) == -1) { log_error ("listen(fd,%d) failed: %s\n", listen_backlog, strerror (errno)); *name = 0; /* Inhibit removal of the socket by cleanup(). */ assuan_sock_close (fd); xfree (unaddr); agent_exit (2); } if (opt.verbose) log_info (_("listening on socket '%s'\n"), unaddr->sun_path); xfree (unaddr); return fd; } /* Check that the directory for storing the private keys exists and create it if not. This function won't fail as it is only a convenience function and not strictly necessary. */ static void create_private_keys_directory (const char *home) { char *fname; struct stat statbuf; fname = make_filename (home, GNUPG_PRIVATE_KEYS_DIR, NULL); if (stat (fname, &statbuf) && errno == ENOENT) { if (gnupg_mkdir (fname, "-rwx")) log_error (_("can't create directory '%s': %s\n"), fname, strerror (errno) ); else if (!opt.quiet) log_info (_("directory '%s' created\n"), fname); } if (gnupg_chmod (fname, "-rwx")) log_error (_("can't set permissions of '%s': %s\n"), fname, strerror (errno)); xfree (fname); } /* Create the directory only if the supplied directory name is the same as the default one. This way we avoid to create arbitrary directories when a non-default home directory is used. To cope with HOME, we compare only the suffix if we see that the default homedir does start with a tilde. We don't stop here in case of problems because other functions will throw an error anyway.*/ static void create_directories (void) { struct stat statbuf; const char *defhome = standard_homedir (); char *home; home = make_filename (gnupg_homedir (), NULL); if ( stat (home, &statbuf) ) { if (errno == ENOENT) { if ( #ifdef HAVE_W32_SYSTEM ( !compare_filenames (home, defhome) ) #else (*defhome == '~' && (strlen (home) >= strlen (defhome+1) && !strcmp (home + strlen(home) - strlen (defhome+1), defhome+1))) || (*defhome != '~' && !strcmp (home, defhome) ) #endif ) { if (gnupg_mkdir (home, "-rwx")) log_error (_("can't create directory '%s': %s\n"), home, strerror (errno) ); else { if (!opt.quiet) log_info (_("directory '%s' created\n"), home); create_private_keys_directory (home); } } } else log_error (_("stat() failed for '%s': %s\n"), home, strerror (errno)); } else if ( !S_ISDIR(statbuf.st_mode)) { log_error (_("can't use '%s' as home directory\n"), home); } else /* exists and is a directory. */ { create_private_keys_directory (home); } xfree (home); } /* This is the worker for the ticker. It is called every few seconds and may only do fast operations. */ static void handle_tick (void) { static time_t last_minute; struct stat statbuf; if (!last_minute) last_minute = time (NULL); /* If we are running as a child of another process, check whether the parent is still alive and shutdown if not. */ #ifndef HAVE_W32_SYSTEM if (parent_pid != (pid_t)(-1)) { if (kill (parent_pid, 0)) { shutdown_pending = 2; log_info ("parent process died - shutting down\n"); - log_info ("%s %s stopped\n", strusage(11), strusage(13) ); + log_info ("%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13)); cleanup (); agent_exit (0); } } #endif /*HAVE_W32_SYSTEM*/ /* Code to be run from time to time. */ #if CHECK_OWN_SOCKET_INTERVAL > 0 if (last_minute + CHECK_OWN_SOCKET_INTERVAL <= time (NULL)) { check_own_socket (); last_minute = time (NULL); } #endif /* Need to check for expired cache entries. */ agent_cache_housekeeping (); /* Check whether the homedir is still available. */ if (!shutdown_pending && (!have_homedir_inotify || !reliable_homedir_inotify) && stat (gnupg_homedir (), &statbuf) && errno == ENOENT) { shutdown_pending = 1; log_info ("homedir has been removed - shutting down\n"); } } /* A global function which allows us to call the reload stuff from other places too. This is only used when build for W32. */ void agent_sighup_action (void) { log_info ("SIGHUP received - " "re-reading configuration and flushing cache\n"); agent_flush_cache (0); reread_configuration (); agent_reload_trustlist (); /* We flush the module name cache so that after installing a "pinentry" binary that one can be used in case the "pinentry-basic" fallback was in use. */ gnupg_module_name_flush_some (); if (opt.disable_scdaemon) agent_card_killscd (); } /* A helper function to handle SIGUSR2. */ static void agent_sigusr2_action (void) { if (opt.verbose) log_info ("SIGUSR2 received - updating card event counter\n"); /* Nothing to check right now. We only increment a counter. */ bump_card_eventcounter (); } #ifndef HAVE_W32_SYSTEM /* The signal handler for this program. It is expected to be run in its own thread and not in the context of a signal handler. */ static void handle_signal (int signo) { switch (signo) { #ifndef HAVE_W32_SYSTEM case SIGHUP: agent_sighup_action (); break; case SIGUSR1: log_info ("SIGUSR1 received - printing internal information:\n"); /* Fixme: We need to see how to integrate pth dumping into our logging system. */ /* pth_ctrl (PTH_CTRL_DUMPSTATE, log_get_stream ()); */ agent_query_dump_state (); agent_scd_dump_state (); break; case SIGUSR2: agent_sigusr2_action (); break; case SIGTERM: if (!shutdown_pending) log_info ("SIGTERM received - shutting down ...\n"); else log_info ("SIGTERM received - still %i open connections\n", active_connections); shutdown_pending++; if (shutdown_pending > 2) { log_info ("shutdown forced\n"); - log_info ("%s %s stopped\n", strusage(11), strusage(13) ); + log_info ("%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13)); cleanup (); agent_exit (0); } break; case SIGINT: log_info ("SIGINT received - immediate shutdown\n"); - log_info( "%s %s stopped\n", strusage(11), strusage(13)); + log_info( "%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13)); cleanup (); agent_exit (0); break; #endif default: log_info ("signal %d received - no action defined\n", signo); } } #endif /* Check the nonce on a new connection. This is a NOP unless we are using our Unix domain socket emulation under Windows. */ static int check_nonce (ctrl_t ctrl, assuan_sock_nonce_t *nonce) { if (assuan_sock_check_nonce (ctrl->thread_startup.fd, nonce)) { log_info (_("error reading nonce on fd %d: %s\n"), FD2INT(ctrl->thread_startup.fd), strerror (errno)); assuan_sock_close (ctrl->thread_startup.fd); xfree (ctrl); return -1; } else return 0; } #ifdef HAVE_W32_SYSTEM /* The window message processing function for Putty. Warning: This code runs as a native Windows thread. Use of our own functions needs to be bracket with pth_leave/pth_enter. */ static LRESULT CALLBACK putty_message_proc (HWND hwnd, UINT msg, WPARAM wparam, LPARAM lparam) { int ret = 0; int w32rc; COPYDATASTRUCT *cds; const char *mapfile; HANDLE maphd; PSID mysid = NULL; PSID mapsid = NULL; void *data = NULL; PSECURITY_DESCRIPTOR psd = NULL; ctrl_t ctrl = NULL; if (msg != WM_COPYDATA) { return DefWindowProc (hwnd, msg, wparam, lparam); } cds = (COPYDATASTRUCT*)lparam; if (cds->dwData != PUTTY_IPC_MAGIC) return 0; /* Ignore data with the wrong magic. */ mapfile = cds->lpData; if (!cds->cbData || mapfile[cds->cbData - 1]) return 0; /* Ignore empty and non-properly terminated strings. */ if (DBG_IPC) { npth_protect (); log_debug ("ssh map file '%s'", mapfile); npth_unprotect (); } maphd = OpenFileMapping (FILE_MAP_ALL_ACCESS, FALSE, mapfile); if (DBG_IPC) { npth_protect (); log_debug ("ssh map handle %p\n", maphd); npth_unprotect (); } if (!maphd || maphd == INVALID_HANDLE_VALUE) return 0; npth_protect (); mysid = w32_get_user_sid (); if (!mysid) { log_error ("error getting my sid\n"); goto leave; } w32rc = GetSecurityInfo (maphd, SE_KERNEL_OBJECT, OWNER_SECURITY_INFORMATION, &mapsid, NULL, NULL, NULL, &psd); if (w32rc) { log_error ("error getting sid of ssh map file: rc=%d", w32rc); goto leave; } if (DBG_IPC) { char *sidstr; if (!ConvertSidToStringSid (mysid, &sidstr)) sidstr = NULL; log_debug (" my sid: '%s'", sidstr? sidstr: "[error]"); LocalFree (sidstr); if (!ConvertSidToStringSid (mapsid, &sidstr)) sidstr = NULL; log_debug ("ssh map file sid: '%s'", sidstr? sidstr: "[error]"); LocalFree (sidstr); } if (!EqualSid (mysid, mapsid)) { log_error ("ssh map file has a non-matching sid\n"); goto leave; } data = MapViewOfFile (maphd, FILE_MAP_ALL_ACCESS, 0, 0, 0); if (DBG_IPC) log_debug ("ssh IPC buffer at %p\n", data); if (!data) goto leave; /* log_printhex ("request:", data, 20); */ ctrl = xtrycalloc (1, sizeof *ctrl); if (!ctrl) { log_error ("error allocating connection control data: %s\n", strerror (errno) ); goto leave; } ctrl->session_env = session_env_new (); if (!ctrl->session_env) { log_error ("error allocating session environment block: %s\n", strerror (errno) ); goto leave; } agent_init_default_ctrl (ctrl); if (!serve_mmapped_ssh_request (ctrl, data, PUTTY_IPC_MAXLEN)) ret = 1; /* Valid ssh message has been constructed. */ agent_deinit_default_ctrl (ctrl); /* log_printhex (" reply:", data, 20); */ leave: xfree (ctrl); if (data) UnmapViewOfFile (data); xfree (mapsid); if (psd) LocalFree (psd); xfree (mysid); CloseHandle (maphd); npth_unprotect (); return ret; } #endif /*HAVE_W32_SYSTEM*/ #ifdef HAVE_W32_SYSTEM /* The thread handling Putty's IPC requests. */ static void * putty_message_thread (void *arg) { WNDCLASS wndwclass = {0, putty_message_proc, 0, 0, NULL, NULL, NULL, NULL, NULL, "Pageant"}; HWND hwnd; MSG msg; (void)arg; if (opt.verbose) log_info ("putty message loop thread started\n"); /* The message loop runs as thread independent from our nPth system. This also means that we need to make sure that we switch back to our system before calling any no-windows function. */ npth_unprotect (); /* First create a window to make sure that a message queue exists for this thread. */ if (!RegisterClass (&wndwclass)) { npth_protect (); log_error ("error registering Pageant window class"); return NULL; } hwnd = CreateWindowEx (0, "Pageant", "Pageant", 0, 0, 0, 0, 0, HWND_MESSAGE, /* hWndParent */ NULL, /* hWndMenu */ NULL, /* hInstance */ NULL); /* lpParm */ if (!hwnd) { npth_protect (); log_error ("error creating Pageant window"); return NULL; } while (GetMessage(&msg, NULL, 0, 0)) { TranslateMessage(&msg); DispatchMessage(&msg); } /* Back to nPth. */ npth_protect (); if (opt.verbose) log_info ("putty message loop thread stopped\n"); return NULL; } #endif /*HAVE_W32_SYSTEM*/ static void * do_start_connection_thread (ctrl_t ctrl) { active_connections++; agent_init_default_ctrl (ctrl); if (opt.verbose && !DBG_IPC) log_info (_("handler 0x%lx for fd %d started\n"), (unsigned long) npth_self(), FD2INT(ctrl->thread_startup.fd)); start_command_handler (ctrl, GNUPG_INVALID_FD, ctrl->thread_startup.fd); if (opt.verbose && !DBG_IPC) log_info (_("handler 0x%lx for fd %d terminated\n"), (unsigned long) npth_self(), FD2INT(ctrl->thread_startup.fd)); agent_deinit_default_ctrl (ctrl); xfree (ctrl); active_connections--; return NULL; } /* This is the standard connection thread's main function. */ static void * start_connection_thread_std (void *arg) { ctrl_t ctrl = arg; if (check_nonce (ctrl, &socket_nonce)) { log_error ("handler 0x%lx nonce check FAILED\n", (unsigned long) npth_self()); return NULL; } return do_start_connection_thread (ctrl); } /* This is the extra socket connection thread's main function. */ static void * start_connection_thread_extra (void *arg) { ctrl_t ctrl = arg; if (check_nonce (ctrl, &socket_nonce_extra)) { log_error ("handler 0x%lx nonce check FAILED\n", (unsigned long) npth_self()); return NULL; } ctrl->restricted = 1; return do_start_connection_thread (ctrl); } /* This is the browser socket connection thread's main function. */ static void * start_connection_thread_browser (void *arg) { ctrl_t ctrl = arg; if (check_nonce (ctrl, &socket_nonce_browser)) { log_error ("handler 0x%lx nonce check FAILED\n", (unsigned long) npth_self()); return NULL; } ctrl->restricted = 2; return do_start_connection_thread (ctrl); } /* This is the ssh connection thread's main function. */ static void * start_connection_thread_ssh (void *arg) { ctrl_t ctrl = arg; if (check_nonce (ctrl, &socket_nonce_ssh)) return NULL; active_connections++; agent_init_default_ctrl (ctrl); if (opt.verbose) log_info (_("ssh handler 0x%lx for fd %d started\n"), (unsigned long) npth_self(), FD2INT(ctrl->thread_startup.fd)); start_command_handler_ssh (ctrl, ctrl->thread_startup.fd); if (opt.verbose) log_info (_("ssh handler 0x%lx for fd %d terminated\n"), (unsigned long) npth_self(), FD2INT(ctrl->thread_startup.fd)); agent_deinit_default_ctrl (ctrl); xfree (ctrl); active_connections--; return NULL; } /* Connection handler loop. Wait for connection requests and spawn a thread after accepting a connection. */ static void handle_connections (gnupg_fd_t listen_fd, gnupg_fd_t listen_fd_extra, gnupg_fd_t listen_fd_browser, gnupg_fd_t listen_fd_ssh) { gpg_error_t err; npth_attr_t tattr; struct sockaddr_un paddr; socklen_t plen; fd_set fdset, read_fdset; int ret; gnupg_fd_t fd; int nfd; int saved_errno; struct timespec abstime; struct timespec curtime; struct timespec timeout; #ifdef HAVE_W32_SYSTEM HANDLE events[2]; unsigned int events_set; #endif int sock_inotify_fd = -1; int home_inotify_fd = -1; struct { const char *name; void *(*func) (void *arg); gnupg_fd_t l_fd; } listentbl[] = { { "std", start_connection_thread_std }, { "extra", start_connection_thread_extra }, { "browser", start_connection_thread_browser }, { "ssh", start_connection_thread_ssh } }; ret = npth_attr_init(&tattr); if (ret) log_fatal ("error allocating thread attributes: %s\n", strerror (ret)); npth_attr_setdetachstate (&tattr, NPTH_CREATE_DETACHED); #ifndef HAVE_W32_SYSTEM npth_sigev_init (); npth_sigev_add (SIGHUP); npth_sigev_add (SIGUSR1); npth_sigev_add (SIGUSR2); npth_sigev_add (SIGINT); npth_sigev_add (SIGTERM); npth_sigev_fini (); #else # ifdef HAVE_W32CE_SYSTEM /* Use a dummy event. */ sigs = 0; ev = pth_event (PTH_EVENT_SIGS, &sigs, &signo); # else events[0] = get_agent_scd_notify_event (); events[1] = INVALID_HANDLE_VALUE; # endif #endif if (disable_check_own_socket) sock_inotify_fd = -1; else if ((err = gnupg_inotify_watch_socket (&sock_inotify_fd, socket_name))) { if (gpg_err_code (err) != GPG_ERR_NOT_SUPPORTED) log_info ("error enabling daemon termination by socket removal: %s\n", gpg_strerror (err)); } if (disable_check_own_socket) home_inotify_fd = -1; else if ((err = gnupg_inotify_watch_delete_self (&home_inotify_fd, gnupg_homedir ()))) { if (gpg_err_code (err) != GPG_ERR_NOT_SUPPORTED) log_info ("error enabling daemon termination by homedir removal: %s\n", gpg_strerror (err)); } else have_homedir_inotify = 1; /* On Windows we need to fire up a separate thread to listen for requests from Putty (an SSH client), so we can replace Putty's Pageant (its ssh-agent implementation). */ #ifdef HAVE_W32_SYSTEM if (putty_support) { npth_t thread; ret = npth_create (&thread, &tattr, putty_message_thread, NULL); if (ret) { log_error ("error spawning putty message loop: %s\n", strerror (ret)); } } #endif /*HAVE_W32_SYSTEM*/ /* Set a flag to tell call-scd.c that it may enable event notifications. */ opt.sigusr2_enabled = 1; FD_ZERO (&fdset); FD_SET (FD2INT (listen_fd), &fdset); nfd = FD2INT (listen_fd); if (listen_fd_extra != GNUPG_INVALID_FD) { FD_SET ( FD2INT(listen_fd_extra), &fdset); if (FD2INT (listen_fd_extra) > nfd) nfd = FD2INT (listen_fd_extra); } if (listen_fd_browser != GNUPG_INVALID_FD) { FD_SET ( FD2INT(listen_fd_browser), &fdset); if (FD2INT (listen_fd_browser) > nfd) nfd = FD2INT (listen_fd_browser); } if (listen_fd_ssh != GNUPG_INVALID_FD) { FD_SET ( FD2INT(listen_fd_ssh), &fdset); if (FD2INT (listen_fd_ssh) > nfd) nfd = FD2INT (listen_fd_ssh); } if (sock_inotify_fd != -1) { FD_SET (sock_inotify_fd, &fdset); if (sock_inotify_fd > nfd) nfd = sock_inotify_fd; } if (home_inotify_fd != -1) { FD_SET (home_inotify_fd, &fdset); if (home_inotify_fd > nfd) nfd = home_inotify_fd; } listentbl[0].l_fd = listen_fd; listentbl[1].l_fd = listen_fd_extra; listentbl[2].l_fd = listen_fd_browser; listentbl[3].l_fd = listen_fd_ssh; npth_clock_gettime (&abstime); abstime.tv_sec += TIMERTICK_INTERVAL; for (;;) { /* Shutdown test. */ if (shutdown_pending) { if (active_connections == 0) break; /* ready */ /* Do not accept new connections but keep on running the * loop to cope with the timer events. * * Note that we do not close the listening socket because a * client trying to connect to that socket would instead * restart a new dirmngr instance - which is unlikely the * intention of a shutdown. */ FD_ZERO (&fdset); nfd = -1; if (sock_inotify_fd != -1) { FD_SET (sock_inotify_fd, &fdset); nfd = sock_inotify_fd; } if (home_inotify_fd != -1) { FD_SET (home_inotify_fd, &fdset); if (home_inotify_fd > nfd) nfd = home_inotify_fd; } } /* POSIX says that fd_set should be implemented as a structure, thus a simple assignment is fine to copy the entire set. */ read_fdset = fdset; npth_clock_gettime (&curtime); if (!(npth_timercmp (&curtime, &abstime, <))) { /* Timeout. */ handle_tick (); npth_clock_gettime (&abstime); abstime.tv_sec += TIMERTICK_INTERVAL; } npth_timersub (&abstime, &curtime, &timeout); #ifndef HAVE_W32_SYSTEM ret = npth_pselect (nfd+1, &read_fdset, NULL, NULL, &timeout, npth_sigev_sigmask ()); saved_errno = errno; { int signo; while (npth_sigev_get_pending (&signo)) handle_signal (signo); } #else ret = npth_eselect (nfd+1, &read_fdset, NULL, NULL, &timeout, events, &events_set); saved_errno = errno; /* This is valid even if npth_eselect returns an error. */ if (events_set & 1) agent_sigusr2_action (); #endif if (ret == -1 && saved_errno != EINTR) { log_error (_("npth_pselect failed: %s - waiting 1s\n"), strerror (saved_errno)); npth_sleep (1); continue; } if (ret <= 0) /* Interrupt or timeout. Will be handled when calculating the next timeout. */ continue; /* The inotify fds are set even when a shutdown is pending (see * above). So we must handle them in any case. To avoid that * they trigger a second time we close them immediately. */ if (sock_inotify_fd != -1 && FD_ISSET (sock_inotify_fd, &read_fdset) && gnupg_inotify_has_name (sock_inotify_fd, GPG_AGENT_SOCK_NAME)) { shutdown_pending = 1; close (sock_inotify_fd); sock_inotify_fd = -1; log_info ("socket file has been removed - shutting down\n"); } if (home_inotify_fd != -1 && FD_ISSET (home_inotify_fd, &read_fdset)) { shutdown_pending = 1; close (home_inotify_fd); home_inotify_fd = -1; log_info ("homedir has been removed - shutting down\n"); } if (!shutdown_pending) { int idx; ctrl_t ctrl; npth_t thread; for (idx=0; idx < DIM(listentbl); idx++) { if (listentbl[idx].l_fd == GNUPG_INVALID_FD) continue; if (!FD_ISSET (FD2INT (listentbl[idx].l_fd), &read_fdset)) continue; plen = sizeof paddr; fd = INT2FD (npth_accept (FD2INT(listentbl[idx].l_fd), (struct sockaddr *)&paddr, &plen)); if (fd == GNUPG_INVALID_FD) { log_error ("accept failed for %s: %s\n", listentbl[idx].name, strerror (errno)); } else if ( !(ctrl = xtrycalloc (1, sizeof *ctrl))) { log_error ("error allocating connection data for %s: %s\n", listentbl[idx].name, strerror (errno) ); assuan_sock_close (fd); } else if ( !(ctrl->session_env = session_env_new ())) { log_error ("error allocating session env block for %s: %s\n", listentbl[idx].name, strerror (errno) ); xfree (ctrl); assuan_sock_close (fd); } else { ctrl->thread_startup.fd = fd; ret = npth_create (&thread, &tattr, listentbl[idx].func, ctrl); if (ret) { log_error ("error spawning connection handler for %s:" " %s\n", listentbl[idx].name, strerror (ret)); assuan_sock_close (fd); xfree (ctrl); } } } } } if (sock_inotify_fd != -1) close (sock_inotify_fd); if (home_inotify_fd != -1) close (home_inotify_fd); cleanup (); - log_info (_("%s %s stopped\n"), strusage(11), strusage(13)); + log_info (_("%s %s stopped\n"), gpgrt_strusage(11), gpgrt_strusage(13)); npth_attr_destroy (&tattr); } /* Helper for check_own_socket. */ static gpg_error_t check_own_socket_pid_cb (void *opaque, const void *buffer, size_t length) { membuf_t *mb = opaque; put_membuf (mb, buffer, length); return 0; } /* The thread running the actual check. We need to run this in a separate thread so that check_own_thread can be called from the timer tick. */ static void * check_own_socket_thread (void *arg) { int rc; char *sockname = arg; assuan_context_t ctx = NULL; membuf_t mb; char *buffer; check_own_socket_running++; rc = assuan_new (&ctx); if (rc) { log_error ("can't allocate assuan context: %s\n", gpg_strerror (rc)); goto leave; } assuan_set_flag (ctx, ASSUAN_NO_LOGGING, 1); rc = assuan_socket_connect (ctx, sockname, (pid_t)(-1), 0); if (rc) { log_error ("can't connect my own socket: %s\n", gpg_strerror (rc)); goto leave; } init_membuf (&mb, 100); rc = assuan_transact (ctx, "GETINFO pid", check_own_socket_pid_cb, &mb, NULL, NULL, NULL, NULL); put_membuf (&mb, "", 1); buffer = get_membuf (&mb, NULL); if (rc || !buffer) { log_error ("sending command \"%s\" to my own socket failed: %s\n", "GETINFO pid", gpg_strerror (rc)); rc = 1; } else if ( (pid_t)strtoul (buffer, NULL, 10) != getpid ()) { log_error ("socket is now serviced by another server\n"); rc = 1; } else if (opt.verbose > 1) log_error ("socket is still served by this server\n"); xfree (buffer); leave: xfree (sockname); if (ctx) assuan_release (ctx); if (rc) { /* We may not remove the socket as it is now in use by another server. */ inhibit_socket_removal = 1; shutdown_pending = 2; log_info ("this process is useless - shutting down\n"); } check_own_socket_running--; return NULL; } /* Check whether we are still listening on our own socket. In case another gpg-agent process started after us has taken ownership of our socket, we would linger around without any real task. Thus we better check once in a while whether we are really needed. */ static void check_own_socket (void) { char *sockname; npth_t thread; npth_attr_t tattr; int err; if (disable_check_own_socket) return; if (check_own_socket_running || shutdown_pending) return; /* Still running or already shutting down. */ sockname = make_filename_try (gnupg_socketdir (), GPG_AGENT_SOCK_NAME, NULL); if (!sockname) return; /* Out of memory. */ err = npth_attr_init (&tattr); if (err) return; npth_attr_setdetachstate (&tattr, NPTH_CREATE_DETACHED); err = npth_create (&thread, &tattr, check_own_socket_thread, sockname); if (err) log_error ("error spawning check_own_socket_thread: %s\n", strerror (err)); npth_attr_destroy (&tattr); } /* Figure out whether an agent is available and running. Prints an error if not. If SILENT is true, no messages are printed. Returns 0 if the agent is running. */ static int check_for_running_agent (int silent) { gpg_error_t err; char *sockname; assuan_context_t ctx = NULL; sockname = make_filename_try (gnupg_socketdir (), GPG_AGENT_SOCK_NAME, NULL); if (!sockname) return gpg_error_from_syserror (); err = assuan_new (&ctx); if (!err) err = assuan_socket_connect (ctx, sockname, (pid_t)(-1), 0); xfree (sockname); if (err) { if (!silent) log_error (_("no gpg-agent running in this session\n")); if (ctx) assuan_release (ctx); return -1; } if (!opt.quiet && !silent) log_info ("gpg-agent running and available\n"); assuan_release (ctx); return 0; } diff --git a/g10/gpgv.c b/g10/gpgv.c index f2f14a676..5ddc2a67c 100644 --- a/g10/gpgv.c +++ b/g10/gpgv.c @@ -1,793 +1,796 @@ /* gpgv.c - The GnuPG signature verify utility - * Copyright (C) 1998, 1999, 2000, 2001, 2002, 2005, 2006, - * 2008, 2009, 2012 Free Software Foundation, Inc. + * Copyright (C) 1998-2020 Free Software Foundation, Inc. + * Copyright (C) 1997-2019 Werner Koch + * Copyright (C) 2015-2020 g10 Code GmbH * * This file is part of GnuPG. * * GnuPG is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * GnuPG is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . + * SPDX-License-Identifier: GPL-3.0-or-later */ #include -/* We don't want to have the macros from gpgrt here until we have - * completely replaced this module by the one from gpgrt. */ -#undef GPGRT_ENABLE_ARGPARSE_MACROS #include #include #include #include #include #include #ifdef HAVE_DOSISH_SYSTEM #include /* for setmode() */ #endif #ifdef HAVE_LIBREADLINE #define GNUPG_LIBREADLINE_H_INCLUDED #include #endif #define INCLUDED_BY_MAIN_MODULE 1 #include "gpg.h" #include "../common/util.h" -#include "../common/argparse.h" /* temporary hack. */ #include "packet.h" #include "../common/iobuf.h" #include "main.h" #include "options.h" #include "keydb.h" #include "trustdb.h" #include "filter.h" #include "../common/ttyio.h" #include "../common/i18n.h" #include "../common/sysutils.h" #include "../common/status.h" #include "call-agent.h" #include "../common/init.h" enum cmd_and_opt_values { aNull = 0, oQuiet = 'q', oVerbose = 'v', oOutput = 'o', oBatch = 500, oKeyring, oIgnoreTimeConflict, oStatusFD, oLoggerFD, oLoggerFile, oHomedir, oWeakDigest, oEnableSpecialFilenames, oDebug, aTest }; -static ARGPARSE_OPTS opts[] = { +static gpgrt_opt_t opts[] = { ARGPARSE_group (300, N_("@\nOptions:\n ")), ARGPARSE_s_n (oVerbose, "verbose", N_("verbose")), ARGPARSE_s_n (oQuiet, "quiet", N_("be somewhat more quiet")), ARGPARSE_s_s (oKeyring, "keyring", N_("|FILE|take the keys from the keyring FILE")), ARGPARSE_s_s (oOutput, "output", N_("|FILE|write output to FILE")), ARGPARSE_s_n (oIgnoreTimeConflict, "ignore-time-conflict", N_("make timestamp conflicts only a warning")), ARGPARSE_s_i (oStatusFD, "status-fd", N_("|FD|write status info to this FD")), ARGPARSE_s_i (oLoggerFD, "logger-fd", "@"), ARGPARSE_s_s (oLoggerFile, "log-file", "@"), ARGPARSE_s_s (oHomedir, "homedir", "@"), ARGPARSE_s_s (oWeakDigest, "weak-digest", N_("|ALGO|reject signatures made with ALGO")), ARGPARSE_s_n (oEnableSpecialFilenames, "enable-special-filenames", "@"), ARGPARSE_s_s (oDebug, "debug", "@"), ARGPARSE_end () }; /* The list of supported debug flags. */ static struct debug_flags_s debug_flags [] = { { DBG_PACKET_VALUE , "packet" }, { DBG_MPI_VALUE , "mpi" }, { DBG_CRYPTO_VALUE , "crypto" }, { DBG_FILTER_VALUE , "filter" }, { DBG_IOBUF_VALUE , "iobuf" }, { DBG_MEMORY_VALUE , "memory" }, { DBG_CACHE_VALUE , "cache" }, { DBG_MEMSTAT_VALUE, "memstat" }, { DBG_TRUST_VALUE , "trust" }, { DBG_HASHING_VALUE, "hashing" }, { DBG_IPC_VALUE , "ipc" }, { DBG_CLOCK_VALUE , "clock" }, { DBG_LOOKUP_VALUE , "lookup" }, { DBG_EXTPROG_VALUE, "extprog" }, { 0, NULL } }; int g10_errors_seen = 0; static char * make_libversion (const char *libname, const char *(*getfnc)(const char*)) { const char *s; char *result; s = getfnc (NULL); result = xmalloc (strlen (libname) + 1 + strlen (s) + 1); strcpy (stpcpy (stpcpy (result, libname), " "), s); return result; } static const char * my_strusage( int level ) { static char *ver_gcry; const char *p; switch (level) { + case 9: p = "GPL-3.0-or-later"; break; case 11: p = "@GPG@v (GnuPG)"; break; case 13: p = VERSION; break; + case 14: p = GNUPG_DEF_COPYRIGHT_LINE; break; case 17: p = PRINTABLE_OS_NAME; break; case 19: p = _("Please report bugs to <@EMAIL@>.\n"); break; case 1: case 40: p = _("Usage: gpgv [options] [files] (-h for help)"); break; case 41: p = _("Syntax: gpgv [options] [files]\n" "Check signatures against known trusted keys\n"); break; case 20: if (!ver_gcry) ver_gcry = make_libversion ("libgcrypt", gcry_check_version); p = ver_gcry; break; default: p = NULL; } return p; } int main( int argc, char **argv ) { - ARGPARSE_ARGS pargs; + gpgrt_argparse_t pargs; int rc=0; strlist_t sl; strlist_t nrings = NULL; - unsigned configlineno; ctrl_t ctrl; early_system_init (); gpgrt_set_strusage (my_strusage); log_set_prefix ("gpgv", GPGRT_LOG_WITH_PREFIX); /* Make sure that our subsystems are ready. */ i18n_init(); init_common_subsystems (&argc, &argv); gcry_control (GCRYCTL_DISABLE_SECMEM, 0); gnupg_init_signals (0, NULL); opt.command_fd = -1; /* no command fd */ opt.keyserver_options.options |= KEYSERVER_AUTO_KEY_RETRIEVE; opt.trust_model = TM_ALWAYS; opt.no_sig_cache = 1; opt.flags.require_cross_cert = 1; opt.batch = 1; opt.answer_yes = 1; opt.weak_digests = NULL; tty_no_terminal(1); tty_batchmode(1); dotlock_disable (); gcry_control (GCRYCTL_INITIALIZATION_FINISHED, 0); additional_weak_digest("MD5"); gnupg_initialize_compliance (GNUPG_MODULE_NAME_GPG); pargs.argc = &argc; pargs.argv = &argv; - pargs.flags= 1; /* do not remove the args */ - while (optfile_parse( NULL, NULL, &configlineno, &pargs, opts)) + pargs.flags= ARGPARSE_FLAG_KEEP; + while (gpgrt_argparser (&pargs, opts, NULL)) { switch (pargs.r_opt) { + case ARGPARSE_CONFFILE: break; + case oQuiet: opt.quiet = 1; break; case oVerbose: opt.verbose++; opt.list_sigs=1; gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose); break; case oDebug: if (parse_debug_flag (pargs.r.ret_str, &opt.debug, debug_flags)) { pargs.r_opt = ARGPARSE_INVALID_ARG; pargs.err = ARGPARSE_PRINT_ERROR; } break; case oKeyring: append_to_strlist( &nrings, pargs.r.ret_str); break; case oOutput: opt.outfile = pargs.r.ret_str; break; case oStatusFD: set_status_fd (translate_sys2libc_fd_int (pargs.r.ret_int, 1)); break; case oLoggerFD: log_set_fd (translate_sys2libc_fd_int (pargs.r.ret_int, 1)); break; case oLoggerFile: log_set_file (pargs.r.ret_str); log_set_prefix (NULL, (GPGRT_LOG_WITH_PREFIX | GPGRT_LOG_WITH_TIME | GPGRT_LOG_WITH_PID) ); break; case oHomedir: gnupg_set_homedir (pargs.r.ret_str); break; case oWeakDigest: additional_weak_digest(pargs.r.ret_str); break; case oIgnoreTimeConflict: opt.ignore_time_conflict = 1; break; case oEnableSpecialFilenames: enable_special_filenames (); break; default : pargs.err = ARGPARSE_PRINT_ERROR; break; } } + gpgrt_argparse (NULL, &pargs, NULL); /* Release internal state. */ + if (log_get_errorcount (0)) g10_exit(2); if (opt.verbose > 1) set_packet_list_mode(1); /* Note: We open all keyrings in read-only mode. */ if (!nrings) /* No keyring given: use default one. */ keydb_add_resource ("trustedkeys" EXTSEP_S "kbx", (KEYDB_RESOURCE_FLAG_READONLY |KEYDB_RESOURCE_FLAG_GPGVDEF)); for (sl = nrings; sl; sl = sl->next) keydb_add_resource (sl->d, KEYDB_RESOURCE_FLAG_READONLY); FREE_STRLIST (nrings); ctrl = xcalloc (1, sizeof *ctrl); if ((rc = verify_signatures (ctrl, argc, argv))) log_error("verify signatures failed: %s\n", gpg_strerror (rc) ); keydb_release (ctrl->cached_getkey_kdb); xfree (ctrl); /* cleanup */ g10_exit (0); return 8; /*NOTREACHED*/ } void g10_exit( int rc ) { rc = rc? rc : log_get_errorcount(0)? 2 : g10_errors_seen? 1 : 0; exit(rc ); } /* Stub: * We have to override the trustcheck from pkclist.c because * this utility assumes that all keys in the keyring are trustworthy */ int check_signatures_trust (ctrl_t ctrl, PKT_signature *sig) { (void)ctrl; (void)sig; return 0; } void read_trust_options (ctrl_t ctrl, byte *trust_model, ulong *created, ulong *nextcheck, byte *marginals, byte *completes, byte *cert_depth, byte *min_cert_level) { (void)ctrl; (void)trust_model; (void)created; (void)nextcheck; (void)marginals; (void)completes; (void)cert_depth; (void)min_cert_level; } /* Stub: * We don't have the trustdb , so we have to provide some stub functions * instead */ int cache_disabled_value (ctrl_t ctrl, PKT_public_key *pk) { (void)ctrl; (void)pk; return 0; } void check_trustdb_stale (ctrl_t ctrl) { (void)ctrl; } int get_validity_info (ctrl_t ctrl, kbnode_t kb, PKT_public_key *pk, PKT_user_id *uid) { (void)ctrl; (void)kb; (void)pk; (void)uid; return '?'; } unsigned int get_validity (ctrl_t ctrl, kbnode_t kb, PKT_public_key *pk, PKT_user_id *uid, PKT_signature *sig, int may_ask) { (void)ctrl; (void)kb; (void)pk; (void)uid; (void)sig; (void)may_ask; return 0; } const char * trust_value_to_string (unsigned int value) { (void)value; return "err"; } const char * uid_trust_string_fixed (ctrl_t ctrl, PKT_public_key *key, PKT_user_id *uid) { (void)ctrl; (void)key; (void)uid; return "err"; } int get_ownertrust_info (ctrl_t ctrl, PKT_public_key *pk, int no_create) { (void)ctrl; (void)pk; (void)no_create; return '?'; } unsigned int get_ownertrust (ctrl_t ctrl, PKT_public_key *pk) { (void)ctrl; (void)pk; return TRUST_UNKNOWN; } /* Stubs: * Because we only work with trusted keys, it does not make sense to * get them from a keyserver */ struct keyserver_spec * keyserver_match (struct keyserver_spec *spec) { (void)spec; return NULL; } int keyserver_any_configured (ctrl_t ctrl) { (void)ctrl; return 0; } int keyserver_import_keyid (u32 *keyid, void *dummy, int quick) { (void)keyid; (void)dummy; (void)quick; return -1; } int keyserver_import_fprint (ctrl_t ctrl, const byte *fprint,size_t fprint_len, struct keyserver_spec *keyserver, int quick) { (void)ctrl; (void)fprint; (void)fprint_len; (void)keyserver; (void)quick; return -1; } int keyserver_import_cert (const char *name) { (void)name; return -1; } int keyserver_import_pka (const char *name,unsigned char *fpr) { (void)name; (void)fpr; return -1; } gpg_error_t keyserver_import_wkd (ctrl_t ctrl, const char *name, int quick, unsigned char **fpr, size_t *fpr_len) { (void)ctrl; (void)name; (void)quick; (void)fpr; (void)fpr_len; return GPG_ERR_BUG; } int keyserver_import_name (const char *name,struct keyserver_spec *spec) { (void)name; (void)spec; return -1; } int keyserver_import_ldap (const char *name) { (void)name; return -1; } gpg_error_t read_key_from_file (ctrl_t ctrl, const char *fname, kbnode_t *r_keyblock) { (void)ctrl; (void)fname; (void)r_keyblock; return -1; } /* Stub: * No encryption here but mainproc links to these functions. */ gpg_error_t get_session_key (ctrl_t ctrl, struct pubkey_enc_list *k, DEK *dek) { (void)ctrl; (void)k; (void)dek; return GPG_ERR_GENERAL; } /* Stub: */ gpg_error_t get_override_session_key (DEK *dek, const char *string) { (void)dek; (void)string; return GPG_ERR_GENERAL; } /* Stub: */ int decrypt_data (ctrl_t ctrl, void *procctx, PKT_encrypted *ed, DEK *dek) { (void)ctrl; (void)procctx; (void)ed; (void)dek; return GPG_ERR_GENERAL; } /* Stub: * No interactive commands, so we don't need the helptexts */ void display_online_help (const char *keyword) { (void)keyword; } /* Stub: * We don't use secret keys, but getkey.c links to this */ int check_secret_key (PKT_public_key *pk, int n) { (void)pk; (void)n; return GPG_ERR_GENERAL; } /* Stub: * No secret key, so no passphrase needed */ DEK * passphrase_to_dek (int cipher_algo, STRING2KEY *s2k, int create, int nocache, const char *tmp, int *canceled) { (void)cipher_algo; (void)s2k; (void)create; (void)nocache; (void)tmp; if (canceled) *canceled = 0; return NULL; } void passphrase_clear_cache (const char *cacheid) { (void)cacheid; } struct keyserver_spec * parse_preferred_keyserver(PKT_signature *sig) { (void)sig; return NULL; } struct keyserver_spec * parse_keyserver_uri (const char *uri, int require_scheme, const char *configname, unsigned int configlineno) { (void)uri; (void)require_scheme; (void)configname; (void)configlineno; return NULL; } void free_keyserver_spec (struct keyserver_spec *keyserver) { (void)keyserver; } /* Stubs to avoid linking to photoid.c */ void show_photos (const struct user_attribute *attrs, int count, PKT_public_key *pk) { (void)attrs; (void)count; (void)pk; } int parse_image_header (const struct user_attribute *attr, byte *type, u32 *len) { (void)attr; (void)type; (void)len; return 0; } char * image_type_to_string (byte type, int string) { (void)type; (void)string; return NULL; } #ifdef ENABLE_CARD_SUPPORT int agent_scd_getattr (const char *name, struct agent_card_info_s *info) { (void)name; (void)info; return 0; } #endif /* ENABLE_CARD_SUPPORT */ /* We do not do any locking, so use these stubs here */ void dotlock_disable (void) { } dotlock_t dotlock_create (const char *file_to_lock, unsigned int flags) { (void)file_to_lock; (void)flags; return NULL; } void dotlock_destroy (dotlock_t h) { (void)h; } int dotlock_take (dotlock_t h, long timeout) { (void)h; (void)timeout; return 0; } int dotlock_release (dotlock_t h) { (void)h; return 0; } void dotlock_remove_lockfiles (void) { } int agent_probe_secret_key (ctrl_t ctrl, PKT_public_key *pk) { (void)ctrl; (void)pk; return 0; } gpg_error_t agent_probe_any_secret_key (ctrl_t ctrl, kbnode_t keyblock) { (void)ctrl; (void)keyblock; return gpg_error (GPG_ERR_NO_SECKEY); } gpg_error_t agent_get_keyinfo (ctrl_t ctrl, const char *hexkeygrip, char **r_serialno, int *r_cleartext) { (void)ctrl; (void)hexkeygrip; (void)r_cleartext; *r_serialno = NULL; return gpg_error (GPG_ERR_NO_SECKEY); } gpg_error_t gpg_dirmngr_get_pka (ctrl_t ctrl, const char *userid, unsigned char **r_fpr, size_t *r_fprlen, char **r_url) { (void)ctrl; (void)userid; if (r_fpr) *r_fpr = NULL; if (r_fprlen) *r_fprlen = 0; if (r_url) *r_url = NULL; return gpg_error (GPG_ERR_NOT_FOUND); } gpg_error_t export_pubkey_buffer (ctrl_t ctrl, const char *keyspec, unsigned int options, export_stats_t stats, kbnode_t *r_keyblock, void **r_data, size_t *r_datalen) { (void)ctrl; (void)keyspec; (void)options; (void)stats; *r_keyblock = NULL; *r_data = NULL; *r_datalen = 0; return gpg_error (GPG_ERR_NOT_IMPLEMENTED); } gpg_error_t tofu_write_tfs_record (ctrl_t ctrl, estream_t fp, PKT_public_key *pk, const char *user_id) { (void)ctrl; (void)fp; (void)pk; (void)user_id; return gpg_error (GPG_ERR_GENERAL); } gpg_error_t tofu_get_policy (ctrl_t ctrl, PKT_public_key *pk, PKT_user_id *user_id, enum tofu_policy *policy) { (void)ctrl; (void)pk; (void)user_id; (void)policy; return gpg_error (GPG_ERR_GENERAL); } const char * tofu_policy_str (enum tofu_policy policy) { (void)policy; return "unknown"; } void tofu_begin_batch_update (ctrl_t ctrl) { (void)ctrl; } void tofu_end_batch_update (ctrl_t ctrl) { (void)ctrl; } gpg_error_t tofu_notice_key_changed (ctrl_t ctrl, kbnode_t kb) { (void) ctrl; (void) kb; return 0; } int get_revocation_reason (PKT_signature *sig, char **r_reason, char **r_comment, size_t *r_commentlen) { (void)sig; (void)r_commentlen; if (r_reason) *r_reason = NULL; if (r_comment) *r_comment = NULL; return 0; } diff --git a/sm/gpgsm.c b/sm/gpgsm.c index 96e14b59d..6cea58dd0 100644 --- a/sm/gpgsm.c +++ b/sm/gpgsm.c @@ -1,2377 +1,2368 @@ /* gpgsm.c - GnuPG for S/MIME - * Copyright (C) 2001-2008, 2010 Free Software Foundation, Inc. - * Copyright (C) 2001-2008, 2010 Werner Koch + * Copyright (C) 2001-2020 Free Software Foundation, Inc. + * Copyright (C) 2001-2019 Werner Koch + * Copyright (C) 2015-2020 g10 Code GmbH * * This file is part of GnuPG. * * GnuPG is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * GnuPG is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . + * SPDX-License-Identifier: GPL-3.0-or-later */ #include -/* We don't want to have the macros from gpgrt here until we have - * completely replaced this module by the one from gpgrt. */ -#undef GPGRT_ENABLE_ARGPARSE_MACROS #include #include #include #include #include #include #include /*#include */ #define INCLUDED_BY_MAIN_MODULE 1 #include "gpgsm.h" #include #include /* malloc hooks */ -#include "../common/argparse.h" /* temporary hack. */ #include "passphrase.h" #include "../common/shareddefs.h" #include "../kbx/keybox.h" /* malloc hooks */ #include "../common/i18n.h" #include "keydb.h" #include "../common/sysutils.h" #include "../common/gc-opt-flags.h" #include "../common/asshelp.h" #include "../common/init.h" #include "../common/compliance.h" #ifndef O_BINARY #define O_BINARY 0 #endif enum cmd_and_opt_values { aNull = 0, oArmor = 'a', aDetachedSign = 'b', aSym = 'c', aDecrypt = 'd', aEncr = 'e', aListKeys = 'k', aListSecretKeys = 'K', oDryRun = 'n', oOutput = 'o', oQuiet = 'q', oRecipient = 'r', aSign = 's', oUser = 'u', oVerbose = 'v', oBatch = 500, aClearsign, aKeygen, aSignEncr, aDeleteKey, aImport, aVerify, aListExternalKeys, aListChain, aSendKeys, aRecvKeys, aExport, aExportSecretKeyP12, aExportSecretKeyP8, aExportSecretKeyRaw, aServer, aLearnCard, aCallDirmngr, aCallProtectTool, aPasswd, aGPGConfList, aGPGConfTest, aDumpKeys, aDumpChain, aDumpSecretKeys, aDumpExternalKeys, aKeydbClearSomeCertFlags, aFingerprint, oOptions, oDebug, oDebugLevel, oDebugAll, oDebugNone, oDebugWait, oDebugAllowCoreDump, oDebugNoChainValidation, oDebugIgnoreExpiration, oLogFile, oNoLogFile, oAuditLog, oHtmlAuditLog, oEnableSpecialFilenames, oAgentProgram, oDisplay, oTTYname, oTTYtype, oLCctype, oLCmessages, oXauthority, oPreferSystemDirmngr, oDirmngrProgram, oDisableDirmngr, oProtectToolProgram, oFakedSystemTime, oPassphraseFD, oPinentryMode, oRequestOrigin, oAssumeArmor, oAssumeBase64, oAssumeBinary, oBase64, oNoArmor, oP12Charset, oCompliance, oDisableCRLChecks, oEnableCRLChecks, oDisableTrustedCertCRLCheck, oEnableTrustedCertCRLCheck, oForceCRLRefresh, oDisableOCSP, oEnableOCSP, oIncludeCerts, oPolicyFile, oDisablePolicyChecks, oEnablePolicyChecks, oAutoIssuerKeyRetrieve, oWithFingerprint, oWithMD5Fingerprint, oWithKeygrip, oWithSecret, oWithKeyScreening, oAnswerYes, oAnswerNo, oKeyring, oDefaultKey, oDefRecipient, oDefRecipientSelf, oNoDefRecipient, oStatusFD, oCipherAlgo, oDigestAlgo, oExtraDigestAlgo, oNoVerbose, oNoSecmemWarn, oNoDefKeyring, oNoGreeting, oNoTTY, oNoOptions, oNoBatch, oHomedir, oWithColons, oWithKeyData, oWithValidation, oWithEphemeralKeys, oSkipVerify, oValidationModel, oKeyServer, oEncryptTo, oNoEncryptTo, oLoggerFD, oDisableCipherAlgo, oDisablePubkeyAlgo, oIgnoreTimeConflict, oNoRandomSeedFile, oNoCommonCertsImport, oIgnoreCertExtension, oAuthenticode, oAttribute, oNoAutostart }; -static ARGPARSE_OPTS opts[] = { +static gpgrt_opt_t opts[] = { ARGPARSE_group (300, N_("@Commands:\n ")), ARGPARSE_c (aSign, "sign", N_("make a signature")), /*ARGPARSE_c (aClearsign, "clearsign", N_("make a clear text signature") ),*/ ARGPARSE_c (aDetachedSign, "detach-sign", N_("make a detached signature")), ARGPARSE_c (aEncr, "encrypt", N_("encrypt data")), /*ARGPARSE_c (aSym, "symmetric", N_("encryption only with symmetric cipher")),*/ ARGPARSE_c (aDecrypt, "decrypt", N_("decrypt data (default)")), ARGPARSE_c (aVerify, "verify", N_("verify a signature")), ARGPARSE_c (aListKeys, "list-keys", N_("list keys")), ARGPARSE_c (aListExternalKeys, "list-external-keys", N_("list external keys")), ARGPARSE_c (aListSecretKeys, "list-secret-keys", N_("list secret keys")), ARGPARSE_c (aListChain, "list-chain", N_("list certificate chain")), ARGPARSE_c (aFingerprint, "fingerprint", N_("list keys and fingerprints")), ARGPARSE_c (aKeygen, "generate-key", N_("generate a new key pair")), ARGPARSE_c (aKeygen, "gen-key", "@"), ARGPARSE_c (aDeleteKey, "delete-keys", N_("remove keys from the public keyring")), /*ARGPARSE_c (aSendKeys, "send-keys", N_("export keys to a keyserver")),*/ /*ARGPARSE_c (aRecvKeys, "recv-keys", N_("import keys from a keyserver")),*/ ARGPARSE_c (aImport, "import", N_("import certificates")), ARGPARSE_c (aExport, "export", N_("export certificates")), /* We use -raw and not -p1 for pkcs#1 secret key export so that it won't accidentally be used in case -p12 was intended. */ ARGPARSE_c (aExportSecretKeyP12, "export-secret-key-p12", "@"), ARGPARSE_c (aExportSecretKeyP8, "export-secret-key-p8", "@"), ARGPARSE_c (aExportSecretKeyRaw, "export-secret-key-raw", "@"), ARGPARSE_c (aLearnCard, "learn-card", N_("register a smartcard")), ARGPARSE_c (aServer, "server", N_("run in server mode")), ARGPARSE_c (aCallDirmngr, "call-dirmngr", N_("pass a command to the dirmngr")), ARGPARSE_c (aCallProtectTool, "call-protect-tool", N_("invoke gpg-protect-tool")), ARGPARSE_c (aPasswd, "change-passphrase", N_("change a passphrase")), ARGPARSE_c (aPasswd, "passwd", "@"), ARGPARSE_c (aGPGConfList, "gpgconf-list", "@"), ARGPARSE_c (aGPGConfTest, "gpgconf-test", "@"), ARGPARSE_c (aDumpKeys, "dump-cert", "@"), ARGPARSE_c (aDumpKeys, "dump-keys", "@"), ARGPARSE_c (aDumpChain, "dump-chain", "@"), ARGPARSE_c (aDumpExternalKeys, "dump-external-keys", "@"), ARGPARSE_c (aDumpSecretKeys, "dump-secret-keys", "@"), ARGPARSE_c (aKeydbClearSomeCertFlags, "keydb-clear-some-cert-flags", "@"), ARGPARSE_group (301, N_("@\nOptions:\n ")), ARGPARSE_s_n (oArmor, "armor", N_("create ascii armored output")), ARGPARSE_s_n (oArmor, "armour", "@"), ARGPARSE_s_n (oBase64, "base64", N_("create base-64 encoded output")), ARGPARSE_s_s (oP12Charset, "p12-charset", "@"), ARGPARSE_s_i (oPassphraseFD, "passphrase-fd", "@"), ARGPARSE_s_s (oPinentryMode, "pinentry-mode", "@"), ARGPARSE_s_s (oRequestOrigin, "request-origin", "@"), ARGPARSE_s_n (oAssumeArmor, "assume-armor", N_("assume input is in PEM format")), ARGPARSE_s_n (oAssumeBase64, "assume-base64", N_("assume input is in base-64 format")), ARGPARSE_s_n (oAssumeBinary, "assume-binary", N_("assume input is in binary format")), ARGPARSE_s_s (oRecipient, "recipient", N_("|USER-ID|encrypt for USER-ID")), ARGPARSE_s_n (oPreferSystemDirmngr,"prefer-system-dirmngr", "@"), ARGPARSE_s_n (oDisableCRLChecks, "disable-crl-checks", N_("never consult a CRL")), ARGPARSE_s_n (oEnableCRLChecks, "enable-crl-checks", "@"), ARGPARSE_s_n (oDisableTrustedCertCRLCheck, "disable-trusted-cert-crl-check", "@"), ARGPARSE_s_n (oEnableTrustedCertCRLCheck, "enable-trusted-cert-crl-check", "@"), ARGPARSE_s_n (oForceCRLRefresh, "force-crl-refresh", "@"), ARGPARSE_s_n (oDisableOCSP, "disable-ocsp", "@"), ARGPARSE_s_n (oEnableOCSP, "enable-ocsp", N_("check validity using OCSP")), ARGPARSE_s_s (oValidationModel, "validation-model", "@"), ARGPARSE_s_i (oIncludeCerts, "include-certs", N_("|N|number of certificates to include") ), ARGPARSE_s_s (oPolicyFile, "policy-file", N_("|FILE|take policy information from FILE")), ARGPARSE_s_n (oDisablePolicyChecks, "disable-policy-checks", N_("do not check certificate policies")), ARGPARSE_s_n (oEnablePolicyChecks, "enable-policy-checks", "@"), ARGPARSE_s_n (oAutoIssuerKeyRetrieve, "auto-issuer-key-retrieve", N_("fetch missing issuer certificates")), ARGPARSE_s_s (oEncryptTo, "encrypt-to", "@"), ARGPARSE_s_n (oNoEncryptTo, "no-encrypt-to", "@"), ARGPARSE_s_s (oUser, "local-user", N_("|USER-ID|use USER-ID to sign or decrypt")), ARGPARSE_s_s (oOutput, "output", N_("|FILE|write output to FILE")), ARGPARSE_s_n (oVerbose, "verbose", N_("verbose")), ARGPARSE_s_n (oQuiet, "quiet", N_("be somewhat more quiet")), ARGPARSE_s_n (oNoTTY, "no-tty", N_("don't use the terminal at all")), ARGPARSE_s_s (oLogFile, "log-file", N_("|FILE|write a server mode log to FILE")), ARGPARSE_s_n (oNoLogFile, "no-log-file", "@"), ARGPARSE_s_i (oLoggerFD, "logger-fd", "@"), ARGPARSE_s_s (oAuditLog, "audit-log", N_("|FILE|write an audit log to FILE")), ARGPARSE_s_s (oHtmlAuditLog, "html-audit-log", "@"), ARGPARSE_s_n (oDryRun, "dry-run", N_("do not make any changes")), ARGPARSE_s_n (oBatch, "batch", N_("batch mode: never ask")), ARGPARSE_s_n (oAnswerYes, "yes", N_("assume yes on most questions")), ARGPARSE_s_n (oAnswerNo, "no", N_("assume no on most questions")), ARGPARSE_s_s (oKeyring, "keyring", N_("|FILE|add keyring to the list of keyrings")), ARGPARSE_s_s (oDefaultKey, "default-key", N_("|USER-ID|use USER-ID as default secret key")), /* Not yet used: */ /* ARGPARSE_s_s (oDefRecipient, "default-recipient", */ /* N_("|NAME|use NAME as default recipient")), */ /* ARGPARSE_s_n (oDefRecipientSelf, "default-recipient-self", */ /* N_("use the default key as default recipient")), */ /* ARGPARSE_s_n (oNoDefRecipient, "no-default-recipient", "@"), */ ARGPARSE_s_s (oKeyServer, "keyserver", N_("|SPEC|use this keyserver to lookup keys")), - ARGPARSE_s_s (oOptions, "options", N_("|FILE|read options from FILE")), + ARGPARSE_conffile (oOptions, "options", N_("|FILE|read options from FILE")), ARGPARSE_s_s (oDebug, "debug", "@"), ARGPARSE_s_s (oDebugLevel, "debug-level", N_("|LEVEL|set the debugging level to LEVEL")), ARGPARSE_s_n (oDebugAll, "debug-all", "@"), ARGPARSE_s_n (oDebugNone, "debug-none", "@"), ARGPARSE_s_i (oDebugWait, "debug-wait", "@"), ARGPARSE_s_n (oDebugAllowCoreDump, "debug-allow-core-dump", "@"), ARGPARSE_s_n (oDebugNoChainValidation, "debug-no-chain-validation", "@"), ARGPARSE_s_n (oDebugIgnoreExpiration, "debug-ignore-expiration", "@"), ARGPARSE_s_i (oStatusFD, "status-fd", N_("|FD|write status info to this FD")), ARGPARSE_s_s (oCipherAlgo, "cipher-algo", N_("|NAME|use cipher algorithm NAME")), ARGPARSE_s_s (oDigestAlgo, "digest-algo", N_("|NAME|use message digest algorithm NAME")), ARGPARSE_s_s (oExtraDigestAlgo, "extra-digest-algo", "@"), ARGPARSE_group (302, N_( "@\n(See the man page for a complete listing of all commands and options)\n" )), /* Hidden options. */ ARGPARSE_s_s (oCompliance, "compliance", "@"), ARGPARSE_s_n (oNoVerbose, "no-verbose", "@"), ARGPARSE_s_n (oEnableSpecialFilenames, "enable-special-filenames", "@"), ARGPARSE_s_n (oNoSecmemWarn, "no-secmem-warning", "@"), ARGPARSE_s_n (oNoArmor, "no-armor", "@"), ARGPARSE_s_n (oNoArmor, "no-armour", "@"), ARGPARSE_s_n (oNoDefKeyring, "no-default-keyring", "@"), ARGPARSE_s_n (oNoGreeting, "no-greeting", "@"), - ARGPARSE_s_n (oNoOptions, "no-options", "@"), + ARGPARSE_noconffile (oNoOptions, "no-options", "@"), ARGPARSE_s_s (oHomedir, "homedir", "@"), ARGPARSE_s_s (oAgentProgram, "agent-program", "@"), ARGPARSE_s_s (oDisplay, "display", "@"), ARGPARSE_s_s (oTTYname, "ttyname", "@"), ARGPARSE_s_s (oTTYtype, "ttytype", "@"), ARGPARSE_s_s (oLCctype, "lc-ctype", "@"), ARGPARSE_s_s (oLCmessages, "lc-messages", "@"), ARGPARSE_s_s (oXauthority, "xauthority", "@"), ARGPARSE_s_s (oDirmngrProgram, "dirmngr-program", "@"), ARGPARSE_s_n (oDisableDirmngr, "disable-dirmngr", "@"), ARGPARSE_s_s (oProtectToolProgram, "protect-tool-program", "@"), ARGPARSE_s_s (oFakedSystemTime, "faked-system-time", "@"), ARGPARSE_s_n (oNoBatch, "no-batch", "@"), ARGPARSE_s_n (oWithColons, "with-colons", "@"), ARGPARSE_s_n (oWithKeyData,"with-key-data", "@"), ARGPARSE_s_n (oWithValidation, "with-validation", "@"), ARGPARSE_s_n (oWithMD5Fingerprint, "with-md5-fingerprint", "@"), ARGPARSE_s_n (oWithEphemeralKeys, "with-ephemeral-keys", "@"), ARGPARSE_s_n (oSkipVerify, "skip-verify", "@"), ARGPARSE_s_n (oWithFingerprint, "with-fingerprint", "@"), ARGPARSE_s_n (oWithKeygrip, "with-keygrip", "@"), ARGPARSE_s_n (oWithSecret, "with-secret", "@"), ARGPARSE_s_n (oWithKeyScreening,"with-key-screening", "@"), ARGPARSE_s_s (oDisableCipherAlgo, "disable-cipher-algo", "@"), ARGPARSE_s_s (oDisablePubkeyAlgo, "disable-pubkey-algo", "@"), ARGPARSE_s_n (oIgnoreTimeConflict, "ignore-time-conflict", "@"), ARGPARSE_s_n (oNoRandomSeedFile, "no-random-seed-file", "@"), ARGPARSE_s_n (oNoCommonCertsImport, "no-common-certs-import", "@"), ARGPARSE_s_s (oIgnoreCertExtension, "ignore-cert-extension", "@"), ARGPARSE_s_n (oNoAutostart, "no-autostart", "@"), ARGPARSE_s_n (oAuthenticode, "authenticode", "@"), ARGPARSE_s_s (oAttribute, "attribute", "@"), /* Command aliases. */ ARGPARSE_c (aListKeys, "list-key", "@"), ARGPARSE_c (aListChain, "list-signatures", "@"), ARGPARSE_c (aListChain, "list-sigs", "@"), ARGPARSE_c (aListChain, "check-signatures", "@"), ARGPARSE_c (aListChain, "check-sigs", "@"), ARGPARSE_c (aDeleteKey, "delete-key", "@"), ARGPARSE_end () }; /* The list of supported debug flags. */ static struct debug_flags_s debug_flags [] = { { DBG_X509_VALUE , "x509" }, { DBG_MPI_VALUE , "mpi" }, { DBG_CRYPTO_VALUE , "crypto" }, { DBG_MEMORY_VALUE , "memory" }, { DBG_CACHE_VALUE , "cache" }, { DBG_MEMSTAT_VALUE, "memstat" }, { DBG_HASHING_VALUE, "hashing" }, { DBG_IPC_VALUE , "ipc" }, { DBG_CLOCK_VALUE , "clock" }, { DBG_LOOKUP_VALUE , "lookup" }, { 0, NULL } }; /* Global variable to keep an error count. */ int gpgsm_errors_seen = 0; /* It is possible that we are currentlu running under setuid permissions */ static int maybe_setuid = 1; /* Helper to implement --debug-level and --debug*/ static const char *debug_level; static unsigned int debug_value; /* Default value for include-certs. We need an extra macro for gpgconf-list because the variable will be changed by the command line option. It is often cumbersome to locate intermediate certificates, thus by default we include all certificates in the chain. However we leave out the root certificate because that would make it too easy for the recipient to import that root certificate. A root certificate should be installed only after due checks and thus it won't help to send it along with each message. */ #define DEFAULT_INCLUDE_CERTS -2 /* Include all certs but root. */ static int default_include_certs = DEFAULT_INCLUDE_CERTS; /* Whether the chain mode shall be used for validation. */ static int default_validation_model; /* The default cipher algo. */ #define DEFAULT_CIPHER_ALGO "AES" static char *build_list (const char *text, const char *(*mapf)(int), int (*chkf)(int)); static void set_cmd (enum cmd_and_opt_values *ret_cmd, enum cmd_and_opt_values new_cmd ); static void emergency_cleanup (void); static int open_read (const char *filename); static estream_t open_es_fread (const char *filename, const char *mode); static estream_t open_es_fwrite (const char *filename); static void run_protect_tool (int argc, char **argv); static int our_pk_test_algo (int algo) { switch (algo) { case GCRY_PK_RSA: case GCRY_PK_ECDSA: return gcry_pk_test_algo (algo); default: return 1; } } static int our_cipher_test_algo (int algo) { switch (algo) { case GCRY_CIPHER_3DES: case GCRY_CIPHER_AES128: case GCRY_CIPHER_AES192: case GCRY_CIPHER_AES256: case GCRY_CIPHER_SERPENT128: case GCRY_CIPHER_SERPENT192: case GCRY_CIPHER_SERPENT256: case GCRY_CIPHER_SEED: case GCRY_CIPHER_CAMELLIA128: case GCRY_CIPHER_CAMELLIA192: case GCRY_CIPHER_CAMELLIA256: return gcry_cipher_test_algo (algo); default: return 1; } } static int our_md_test_algo (int algo) { switch (algo) { case GCRY_MD_MD5: case GCRY_MD_SHA1: case GCRY_MD_RMD160: case GCRY_MD_SHA224: case GCRY_MD_SHA256: case GCRY_MD_SHA384: case GCRY_MD_SHA512: case GCRY_MD_WHIRLPOOL: return gcry_md_test_algo (algo); default: return 1; } } static char * make_libversion (const char *libname, const char *(*getfnc)(const char*)) { const char *s; char *result; if (maybe_setuid) { gcry_control (GCRYCTL_INIT_SECMEM, 0, 0); /* Drop setuid. */ maybe_setuid = 0; } s = getfnc (NULL); result = xmalloc (strlen (libname) + 1 + strlen (s) + 1); strcpy (stpcpy (stpcpy (result, libname), " "), s); return result; } static const char * my_strusage( int level ) { static char *digests, *pubkeys, *ciphers; static char *ver_gcry, *ver_ksba; const char *p; switch (level) { + case 9: p = "GPL-3.0-or-later"; break; case 11: p = "@GPGSM@ (@GNUPG@)"; break; case 13: p = VERSION; break; + case 14: p = GNUPG_DEF_COPYRIGHT_LINE; break; case 17: p = PRINTABLE_OS_NAME; break; case 19: p = _("Please report bugs to <@EMAIL@>.\n"); break; case 1: case 40: p = _("Usage: @GPGSM@ [options] [files] (-h for help)"); break; case 41: p = _("Syntax: @GPGSM@ [options] [files]\n" "Sign, check, encrypt or decrypt using the S/MIME protocol\n" "Default operation depends on the input data\n"); break; case 20: if (!ver_gcry) ver_gcry = make_libversion ("libgcrypt", gcry_check_version); p = ver_gcry; break; case 21: if (!ver_ksba) ver_ksba = make_libversion ("libksba", ksba_check_version); p = ver_ksba; break; case 31: p = "\nHome: "; break; case 32: p = gnupg_homedir (); break; case 33: p = _("\nSupported algorithms:\n"); break; case 34: if (!ciphers) ciphers = build_list ("Cipher: ", gnupg_cipher_algo_name, our_cipher_test_algo ); p = ciphers; break; case 35: if (!pubkeys) pubkeys = build_list ("Pubkey: ", gcry_pk_algo_name, our_pk_test_algo ); p = pubkeys; break; case 36: if (!digests) digests = build_list("Hash: ", gcry_md_algo_name, our_md_test_algo ); p = digests; break; default: p = NULL; break; } return p; } static char * build_list (const char *text, const char * (*mapf)(int), int (*chkf)(int)) { int i; size_t n=strlen(text)+2; char *list, *p; if (maybe_setuid) { gcry_control (GCRYCTL_DROP_PRIVS); /* drop setuid */ } for (i=1; i < 400; i++ ) if (!chkf(i)) n += strlen(mapf(i)) + 2; list = xmalloc (21 + n); *list = 0; for (p=NULL, i=1; i < 400; i++) { if (!chkf(i)) { if( !p ) p = stpcpy (list, text ); else p = stpcpy (p, ", "); p = stpcpy (p, mapf(i) ); } } if (p) strcpy (p, "\n" ); return list; } /* Set the file pointer into binary mode if required. */ static void set_binary (FILE *fp) { #ifdef HAVE_DOSISH_SYSTEM setmode (fileno (fp), O_BINARY); #else (void)fp; #endif } static void wrong_args (const char *text) { fprintf (stderr, _("usage: %s [options] %s\n"), GPGSM_NAME, text); gpgsm_exit (2); } static void set_opt_session_env (const char *name, const char *value) { gpg_error_t err; err = session_env_setenv (opt.session_env, name, value); if (err) log_fatal ("error setting session environment: %s\n", gpg_strerror (err)); } /* Setup the debugging. With a DEBUG_LEVEL of NULL only the active debug flags are propagated to the subsystems. With DEBUG_LEVEL set, a specific set of debug flags is set; and individual debugging flags will be added on top. */ static void set_debug (void) { int numok = (debug_level && digitp (debug_level)); int numlvl = numok? atoi (debug_level) : 0; if (!debug_level) ; else if (!strcmp (debug_level, "none") || (numok && numlvl < 1)) opt.debug = 0; else if (!strcmp (debug_level, "basic") || (numok && numlvl <= 2)) opt.debug = DBG_IPC_VALUE; else if (!strcmp (debug_level, "advanced") || (numok && numlvl <= 5)) opt.debug = DBG_IPC_VALUE|DBG_X509_VALUE; else if (!strcmp (debug_level, "expert") || (numok && numlvl <= 8)) opt.debug = (DBG_IPC_VALUE|DBG_X509_VALUE |DBG_CACHE_VALUE|DBG_CRYPTO_VALUE); else if (!strcmp (debug_level, "guru") || numok) { opt.debug = ~0; /* Unless the "guru" string has been used we don't want to allow hashing debugging. The rationale is that people tend to select the highest debug value and would then clutter their disk with debug files which may reveal confidential data. */ if (numok) opt.debug &= ~(DBG_HASHING_VALUE); } else { log_error (_("invalid debug-level '%s' given\n"), debug_level); gpgsm_exit (2); } opt.debug |= debug_value; if (opt.debug && !opt.verbose) opt.verbose = 1; if (opt.debug) opt.quiet = 0; if (opt.debug & DBG_MPI_VALUE) gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 2); if (opt.debug & DBG_CRYPTO_VALUE ) gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 1); gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose); if (opt.debug) parse_debug_flag (NULL, &opt.debug, debug_flags); } static void set_cmd (enum cmd_and_opt_values *ret_cmd, enum cmd_and_opt_values new_cmd) { enum cmd_and_opt_values cmd = *ret_cmd; if (!cmd || cmd == new_cmd) cmd = new_cmd; else if ( cmd == aSign && new_cmd == aEncr ) cmd = aSignEncr; else if ( cmd == aEncr && new_cmd == aSign ) cmd = aSignEncr; else if ( (cmd == aSign && new_cmd == aClearsign) || (cmd == aClearsign && new_cmd == aSign) ) cmd = aClearsign; else { log_error(_("conflicting commands\n")); gpgsm_exit(2); } *ret_cmd = cmd; } /* Helper to add recipients to a list. */ static void do_add_recipient (ctrl_t ctrl, const char *name, certlist_t *recplist, int is_encrypt_to, int recp_required) { int rc = gpgsm_add_to_certlist (ctrl, name, 0, recplist, is_encrypt_to); if (rc) { if (recp_required) { log_error ("can't encrypt to '%s': %s\n", name, gpg_strerror (rc)); gpgsm_status2 (ctrl, STATUS_INV_RECP, get_inv_recpsgnr_code (rc), name, NULL); } else log_info (_("Note: won't be able to encrypt to '%s': %s\n"), name, gpg_strerror (rc)); } } static void parse_validation_model (const char *model) { int i = gpgsm_parse_validation_model (model); if (i == -1) log_error (_("unknown validation model '%s'\n"), model); else default_validation_model = i; } /* Release the list of SERVERS. As usual it is okay to call this function with SERVERS passed as NULL. */ void keyserver_list_free (struct keyserver_spec *servers) { while (servers) { struct keyserver_spec *tmp = servers->next; xfree (servers->host); xfree (servers->user); if (servers->pass) memset (servers->pass, 0, strlen (servers->pass)); xfree (servers->pass); xfree (servers->base); xfree (servers); servers = tmp; } } /* See also dirmngr ldapserver_parse_one(). */ struct keyserver_spec * parse_keyserver_line (char *line, const char *filename, unsigned int lineno) { char *p; char *endp; const char *s; struct keyserver_spec *server; int fieldno; int fail = 0; int i; if (!filename) { filename = "[cmd]"; lineno = 0; } /* Parse the colon separated fields. */ server = xcalloc (1, sizeof *server); for (fieldno = 1, p = line; p; p = endp, fieldno++ ) { endp = strchr (p, ':'); if (endp) *endp++ = '\0'; trim_spaces (p); switch (fieldno) { case 1: if (*p) server->host = xstrdup (p); else { log_error (_("%s:%u: no hostname given\n"), filename, lineno); fail = 1; } break; case 2: if (*p) server->port = atoi (p); break; case 3: if (*p) server->user = xstrdup (p); break; case 4: if (*p && !server->user) { log_error (_("%s:%u: password given without user\n"), filename, lineno); fail = 1; } else if (*p) server->pass = xstrdup (p); break; case 5: if (*p) server->base = xstrdup (p); break; case 6: { char **flags = NULL; flags = strtokenize (p, ","); if (!flags) log_fatal ("strtokenize failed: %s\n", gpg_strerror (gpg_error_from_syserror ())); for (i=0; (s = flags[i]); i++) { if (!*s) ; else if (!ascii_strcasecmp (s, "ldaps")) server->use_ldaps = 1; else if (!ascii_strcasecmp (s, "ldap")) server->use_ldaps = 0; else log_info (_("%s:%u: ignoring unknown flag '%s'\n"), filename, lineno, s); } xfree (flags); } break; default: /* (We silently ignore extra fields.) */ break; } } if (fail) { log_info (_("%s:%u: skipping this line\n"), filename, lineno); keyserver_list_free (server); server = NULL; } return server; } int main ( int argc, char **argv) { - ARGPARSE_ARGS pargs; + gpgrt_argparse_t pargs; int orig_argc; char **orig_argv; /* char *username;*/ int may_coredump; strlist_t sl, remusr= NULL, locusr=NULL; strlist_t nrings=NULL; int detached_sig = 0; - FILE *configfp = NULL; - char *configname = NULL; - unsigned configlineno; - int parse_debug = 0; + char *last_configname = NULL; + const char *configname = NULL; /* NULL or points to last_configname. + * NULL also indicates that we are + * processing options from the cmdline. */ + int debug_argparser = 0; int no_more_options = 0; - int default_config =1; int default_keyring = 1; char *logfile = NULL; char *auditlog = NULL; char *htmlauditlog = NULL; int greeting = 0; int nogreeting = 0; int debug_wait = 0; int use_random_seed = 1; int no_common_certs_import = 0; int with_fpr = 0; const char *forced_digest_algo = NULL; const char *extra_digest_algo = NULL; enum cmd_and_opt_values cmd = 0; struct server_control_s ctrl; certlist_t recplist = NULL; certlist_t signerlist = NULL; int do_not_setup_keys = 0; int recp_required = 0; estream_t auditfp = NULL; estream_t htmlauditfp = NULL; struct assuan_malloc_hooks malloc_hooks; int pwfd = -1; /*mtrace();*/ early_system_init (); gnupg_reopen_std (GPGSM_NAME); /* trap_unaligned ();*/ gnupg_rl_initialize (); - set_strusage (my_strusage); + gpgrt_set_strusage (my_strusage); gcry_control (GCRYCTL_SUSPEND_SECMEM_WARN); /* Please note that we may running SUID(ROOT), so be very CAREFUL when adding any stuff between here and the call to secmem_init() somewhere after the option parsing */ log_set_prefix (GPGSM_NAME, GPGRT_LOG_WITH_PREFIX); /* Make sure that our subsystems are ready. */ i18n_init (); init_common_subsystems (&argc, &argv); /* Check that the libraries are suitable. Do it here because the option parse may need services of the library */ if (!ksba_check_version (NEED_KSBA_VERSION) ) log_fatal (_("%s is too old (need %s, have %s)\n"), "libksba", NEED_KSBA_VERSION, ksba_check_version (NULL) ); gcry_control (GCRYCTL_USE_SECURE_RNDPOOL); may_coredump = disable_core_dumps (); gnupg_init_signals (0, emergency_cleanup); dotlock_create (NULL, 0); /* Register lockfile cleanup. */ /* Tell the compliance module who we are. */ gnupg_initialize_compliance (GNUPG_MODULE_NAME_GPGSM); opt.autostart = 1; opt.session_env = session_env_new (); if (!opt.session_env) log_fatal ("error allocating session environment block: %s\n", strerror (errno)); /* Note: If you change this default cipher algorithm , please remember to update the Gpgconflist entry as well. */ opt.def_cipher_algoid = DEFAULT_CIPHER_ALGO; /* First check whether we have a config file on the commandline */ orig_argc = argc; orig_argv = argv; pargs.argc = &argc; pargs.argv = &argv; - pargs.flags= 1|(1<<6); /* do not remove the args, ignore version */ - while (arg_parse( &pargs, opts)) + pargs.flags= (ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); + while (gpgrt_argparse (NULL, &pargs, opts)) { - if (pargs.r_opt == oDebug || pargs.r_opt == oDebugAll) - parse_debug++; - else if (pargs.r_opt == oOptions) - { /* yes there is one, so we do not try the default one but - read the config file when it is encountered at the - commandline */ - default_config = 0; - } - else if (pargs.r_opt == oNoOptions) + switch (pargs.r_opt) { - default_config = 0; /* --no-options */ + case oDebug: + case oDebugAll: + debug_argparser++; + break; + + case oNoOptions: + /* Set here here because the homedir would otherwise be + * created before main option parsing starts. */ opt.no_homedir_creation = 1; + break; + + case oHomedir: + gnupg_set_homedir (pargs.r.ret_str); + break; + + case aCallProtectTool: + /* Make sure that --version and --help are passed to the + * protect-tool. */ + goto leave_cmdline_parser; } - else if (pargs.r_opt == oHomedir) - gnupg_set_homedir (pargs.r.ret_str); - else if (pargs.r_opt == aCallProtectTool) - break; /* This break makes sure that --version and --help are - passed to the protect-tool. */ } - + leave_cmdline_parser: + /* Reset the flags. */ + pargs.flags &= ~(ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); /* Initialize the secure memory. */ gcry_control (GCRYCTL_INIT_SECMEM, 16384, 0); maybe_setuid = 0; /* Now we are now working under our real uid */ ksba_set_malloc_hooks (gcry_malloc, gcry_realloc, gcry_free ); malloc_hooks.malloc = gcry_malloc; malloc_hooks.realloc = gcry_realloc; malloc_hooks.free = gcry_free; assuan_set_malloc_hooks (&malloc_hooks); assuan_set_gpg_err_source (GPG_ERR_SOURCE_DEFAULT); setup_libassuan_logging (&opt.debug, NULL); /* Setup a default control structure for command line mode */ memset (&ctrl, 0, sizeof ctrl); gpgsm_init_default_ctrl (&ctrl); ctrl.no_server = 1; ctrl.status_fd = -1; /* No status output. */ ctrl.autodetect_encoding = 1; - /* Set the default option file */ - if (default_config ) - configname = make_filename (gnupg_homedir (), - GPGSM_NAME EXTSEP_S "conf", NULL); /* Set the default policy file */ opt.policy_file = make_filename (gnupg_homedir (), "policies.txt", NULL); + /* The configuraton directories for use by gpgrt_argparser. */ + gpgrt_set_confdir (GPGRT_CONFDIR_SYS, gnupg_sysconfdir ()); + gpgrt_set_confdir (GPGRT_CONFDIR_USER, gnupg_homedir ()); + + /* We are re-using the struct, thus the reset flag. We OR the + * flags so that the internal intialized flag won't be cleared. */ argc = orig_argc; argv = orig_argv; pargs.argc = &argc; pargs.argv = &argv; - pargs.flags = 1; /* do not remove the args */ - - next_pass: - if (configname) { - configlineno = 0; - configfp = fopen (configname, "r"); - if (!configfp) - { - if (default_config) - { - if (parse_debug) - log_info (_("Note: no default option file '%s'\n"), configname); - } - else - { - log_error (_("option file '%s': %s\n"), configname, strerror(errno)); - gpgsm_exit(2); - } - xfree(configname); - configname = NULL; - } - if (parse_debug && configname) - log_info (_("reading options from '%s'\n"), configname); - default_config = 0; - } + pargs.flags |= (ARGPARSE_FLAG_RESET + | ARGPARSE_FLAG_KEEP + | ARGPARSE_FLAG_SYS + | ARGPARSE_FLAG_USER); while (!no_more_options - && optfile_parse (configfp, configname, &configlineno, &pargs, opts)) + && gpgrt_argparser (&pargs, opts, GPGSM_NAME EXTSEP_S "conf")) { switch (pargs.r_opt) { + case ARGPARSE_CONFFILE: + if (debug_argparser) + log_info (_("reading options from '%s'\n"), + pargs.r_type? pargs.r.ret_str: "[cmdline]"); + if (pargs.r_type) + { + xfree (last_configname); + last_configname = xstrdup (pargs.r.ret_str); + configname = last_configname; + } + else + configname = NULL; + break; + case aGPGConfList: case aGPGConfTest: set_cmd (&cmd, pargs.r_opt); do_not_setup_keys = 1; nogreeting = 1; break; case aServer: opt.batch = 1; set_cmd (&cmd, aServer); break; case aCallDirmngr: opt.batch = 1; set_cmd (&cmd, aCallDirmngr); do_not_setup_keys = 1; break; case aCallProtectTool: opt.batch = 1; set_cmd (&cmd, aCallProtectTool); no_more_options = 1; /* Stop parsing. */ do_not_setup_keys = 1; break; case aDeleteKey: set_cmd (&cmd, aDeleteKey); /*greeting=1;*/ do_not_setup_keys = 1; break; case aDetachedSign: detached_sig = 1; set_cmd (&cmd, aSign ); break; case aKeygen: set_cmd (&cmd, aKeygen); greeting=1; do_not_setup_keys = 1; break; case aImport: case aSendKeys: case aRecvKeys: case aExport: case aExportSecretKeyP12: case aExportSecretKeyP8: case aExportSecretKeyRaw: case aDumpKeys: case aDumpChain: case aDumpExternalKeys: case aDumpSecretKeys: case aListKeys: case aListExternalKeys: case aListSecretKeys: case aListChain: case aLearnCard: case aPasswd: case aKeydbClearSomeCertFlags: do_not_setup_keys = 1; set_cmd (&cmd, pargs.r_opt); break; case aEncr: recp_required = 1; set_cmd (&cmd, pargs.r_opt); break; case aSym: case aDecrypt: case aSign: case aClearsign: case aVerify: set_cmd (&cmd, pargs.r_opt); break; /* Output encoding selection. */ case oArmor: ctrl.create_pem = 1; break; case oBase64: ctrl.create_pem = 0; ctrl.create_base64 = 1; break; case oNoArmor: ctrl.create_pem = 0; ctrl.create_base64 = 0; break; case oP12Charset: opt.p12_charset = pargs.r.ret_str; break; case oPassphraseFD: pwfd = translate_sys2libc_fd_int (pargs.r.ret_int, 0); break; case oPinentryMode: opt.pinentry_mode = parse_pinentry_mode (pargs.r.ret_str); if (opt.pinentry_mode == -1) log_error (_("invalid pinentry mode '%s'\n"), pargs.r.ret_str); break; case oRequestOrigin: opt.request_origin = parse_request_origin (pargs.r.ret_str); if (opt.request_origin == -1) log_error (_("invalid request origin '%s'\n"), pargs.r.ret_str); break; /* Input encoding selection. */ case oAssumeArmor: ctrl.autodetect_encoding = 0; ctrl.is_pem = 1; ctrl.is_base64 = 0; break; case oAssumeBase64: ctrl.autodetect_encoding = 0; ctrl.is_pem = 0; ctrl.is_base64 = 1; break; case oAssumeBinary: ctrl.autodetect_encoding = 0; ctrl.is_pem = 0; ctrl.is_base64 = 0; break; case oDisableCRLChecks: opt.no_crl_check = 1; break; case oEnableCRLChecks: opt.no_crl_check = 0; break; case oDisableTrustedCertCRLCheck: opt.no_trusted_cert_crl_check = 1; break; case oEnableTrustedCertCRLCheck: opt.no_trusted_cert_crl_check = 0; break; case oForceCRLRefresh: opt.force_crl_refresh = 1; break; case oDisableOCSP: ctrl.use_ocsp = opt.enable_ocsp = 0; break; case oEnableOCSP: ctrl.use_ocsp = opt.enable_ocsp = 1; break; case oIncludeCerts: ctrl.include_certs = default_include_certs = pargs.r.ret_int; break; case oPolicyFile: xfree (opt.policy_file); if (*pargs.r.ret_str) opt.policy_file = xstrdup (pargs.r.ret_str); else opt.policy_file = NULL; break; case oDisablePolicyChecks: opt.no_policy_check = 1; break; case oEnablePolicyChecks: opt.no_policy_check = 0; break; case oAutoIssuerKeyRetrieve: opt.auto_issuer_key_retrieve = 1; break; case oOutput: opt.outfile = pargs.r.ret_str; break; case oQuiet: opt.quiet = 1; break; case oNoTTY: /* fixme:tty_no_terminal(1);*/ break; case oDryRun: opt.dry_run = 1; break; case oVerbose: opt.verbose++; gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose); break; case oNoVerbose: opt.verbose = 0; gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose); break; case oLogFile: logfile = pargs.r.ret_str; break; case oNoLogFile: logfile = NULL; break; case oAuditLog: auditlog = pargs.r.ret_str; break; case oHtmlAuditLog: htmlauditlog = pargs.r.ret_str; break; case oBatch: opt.batch = 1; greeting = 0; break; case oNoBatch: opt.batch = 0; break; case oAnswerYes: opt.answer_yes = 1; break; case oAnswerNo: opt.answer_no = 1; break; case oKeyring: append_to_strlist (&nrings, pargs.r.ret_str); break; case oDebug: if (parse_debug_flag (pargs.r.ret_str, &debug_value, debug_flags)) { pargs.r_opt = ARGPARSE_INVALID_ARG; pargs.err = ARGPARSE_PRINT_ERROR; } break; case oDebugAll: debug_value = ~0; break; case oDebugNone: debug_value = 0; break; case oDebugLevel: debug_level = pargs.r.ret_str; break; case oDebugWait: debug_wait = pargs.r.ret_int; break; case oDebugAllowCoreDump: may_coredump = enable_core_dumps (); break; case oDebugNoChainValidation: opt.no_chain_validation = 1; break; case oDebugIgnoreExpiration: opt.ignore_expiration = 1; break; case oStatusFD: ctrl.status_fd = translate_sys2libc_fd_int (pargs.r.ret_int, 1); break; case oLoggerFD: log_set_fd (translate_sys2libc_fd_int (pargs.r.ret_int, 1)); break; case oWithMD5Fingerprint: opt.with_md5_fingerprint=1; /*fall through*/ case oWithFingerprint: with_fpr=1; /*fall through*/ case aFingerprint: opt.fingerprint++; break; case oWithKeygrip: opt.with_keygrip = 1; break; case oWithKeyScreening: opt.with_key_screening = 1; break; - case oOptions: - /* config files may not be nested (silently ignore them) */ - if (!configfp) - { - xfree(configname); - configname = xstrdup (pargs.r.ret_str); - goto next_pass; - } - break; - case oNoOptions: opt.no_homedir_creation = 1; break; /* no-options */ case oHomedir: gnupg_set_homedir (pargs.r.ret_str); break; case oAgentProgram: opt.agent_program = pargs.r.ret_str; break; case oDisplay: set_opt_session_env ("DISPLAY", pargs.r.ret_str); break; case oTTYname: set_opt_session_env ("GPG_TTY", pargs.r.ret_str); break; case oTTYtype: set_opt_session_env ("TERM", pargs.r.ret_str); break; case oXauthority: set_opt_session_env ("XAUTHORITY", pargs.r.ret_str); break; case oLCctype: opt.lc_ctype = xstrdup (pargs.r.ret_str); break; case oLCmessages: opt.lc_messages = xstrdup (pargs.r.ret_str); break; case oDirmngrProgram: opt.dirmngr_program = pargs.r.ret_str; break; case oDisableDirmngr: opt.disable_dirmngr = 1; break; case oPreferSystemDirmngr: /* Obsolete */; break; case oProtectToolProgram: opt.protect_tool_program = pargs.r.ret_str; break; case oFakedSystemTime: { time_t faked_time = isotime2epoch (pargs.r.ret_str); if (faked_time == (time_t)(-1)) faked_time = (time_t)strtoul (pargs.r.ret_str, NULL, 10); gnupg_set_time (faked_time, 0); } break; case oNoDefKeyring: default_keyring = 0; break; case oNoGreeting: nogreeting = 1; break; case oDefaultKey: if (*pargs.r.ret_str) { xfree (opt.local_user); opt.local_user = xstrdup (pargs.r.ret_str); } break; case oDefRecipient: if (*pargs.r.ret_str) opt.def_recipient = xstrdup (pargs.r.ret_str); break; case oDefRecipientSelf: xfree (opt.def_recipient); opt.def_recipient = NULL; opt.def_recipient_self = 1; break; case oNoDefRecipient: xfree (opt.def_recipient); opt.def_recipient = NULL; opt.def_recipient_self = 0; break; case oWithKeyData: opt.with_key_data=1; /* fall through */ case oWithColons: ctrl.with_colons = 1; break; case oWithSecret: ctrl.with_secret = 1; break; case oWithValidation: ctrl.with_validation=1; break; case oWithEphemeralKeys: ctrl.with_ephemeral_keys=1; break; case oSkipVerify: opt.skip_verify=1; break; case oNoEncryptTo: opt.no_encrypt_to = 1; break; case oEncryptTo: /* Store the recipient in the second list */ sl = add_to_strlist (&remusr, pargs.r.ret_str); sl->flags = 1; break; case oRecipient: /* store the recipient */ add_to_strlist ( &remusr, pargs.r.ret_str); break; case oUser: /* Store the local users, the first one is the default */ if (!opt.local_user) opt.local_user = xstrdup (pargs.r.ret_str); add_to_strlist (&locusr, pargs.r.ret_str); break; case oNoSecmemWarn: gcry_control (GCRYCTL_DISABLE_SECMEM_WARN); break; case oCipherAlgo: opt.def_cipher_algoid = pargs.r.ret_str; break; case oDisableCipherAlgo: { int algo = gcry_cipher_map_name (pargs.r.ret_str); gcry_cipher_ctl (NULL, GCRYCTL_DISABLE_ALGO, &algo, sizeof algo); } break; case oDisablePubkeyAlgo: { int algo = gcry_pk_map_name (pargs.r.ret_str); gcry_pk_ctl (GCRYCTL_DISABLE_ALGO,&algo, sizeof algo ); } break; case oDigestAlgo: forced_digest_algo = pargs.r.ret_str; break; case oExtraDigestAlgo: extra_digest_algo = pargs.r.ret_str; break; case oIgnoreTimeConflict: opt.ignore_time_conflict = 1; break; case oNoRandomSeedFile: use_random_seed = 0; break; case oNoCommonCertsImport: no_common_certs_import = 1; break; case oEnableSpecialFilenames: enable_special_filenames (); break; case oValidationModel: parse_validation_model (pargs.r.ret_str); break; case oKeyServer: { struct keyserver_spec *keyserver; keyserver = parse_keyserver_line (pargs.r.ret_str, - configname, configlineno); + configname, pargs.lineno); if (! keyserver) log_error (_("could not parse keyserver\n")); else { /* FIXME: Keep last next pointer. */ struct keyserver_spec **next_p = &opt.keyserver; while (*next_p) next_p = &(*next_p)->next; *next_p = keyserver; } } break; case oIgnoreCertExtension: add_to_strlist (&opt.ignored_cert_extensions, pargs.r.ret_str); break; case oAuthenticode: opt.authenticode = 1; break; case oAttribute: add_to_strlist (&opt.attributes, pargs.r.ret_str); break; case oNoAutostart: opt.autostart = 0; break; case oCompliance: { struct gnupg_compliance_option compliance_options[] = { { "gnupg", CO_GNUPG }, { "de-vs", CO_DE_VS } }; - int compliance = gnupg_parse_compliance_option (pargs.r.ret_str, - compliance_options, - DIM (compliance_options), - opt.quiet); + int compliance = gnupg_parse_compliance_option + (pargs.r.ret_str, compliance_options, DIM (compliance_options), + opt.quiet); if (compliance < 0) log_inc_errorcount (); /* Force later termination. */ opt.compliance = compliance; } break; default: - pargs.err = configfp? ARGPARSE_PRINT_WARNING:ARGPARSE_PRINT_ERROR; + if (configname) + pargs.err = ARGPARSE_PRINT_WARNING; + else + { + pargs.err = ARGPARSE_PRINT_ERROR; + /* The argparse function calls a plain exit and thus we + * need to print a status here. */ + gpgsm_status_with_error (&ctrl, STATUS_FAILURE, "option-parser", + gpg_error (GPG_ERR_GENERAL)); + } break; } } - if (configfp) - { - fclose (configfp); - configfp = NULL; - /* Keep a copy of the config filename. */ - opt.config_filename = configname; - configname = NULL; - goto next_pass; - } - xfree (configname); - configname = NULL; + gpgrt_argparse (NULL, &pargs, NULL); /* Release internal state. */ - if (!opt.config_filename) - opt.config_filename = make_filename (gnupg_homedir (), - GPGSM_NAME EXTSEP_S "conf", - NULL); + if (!last_configname) + opt.config_filename = gpgrt_fnameconcat (gnupg_homedir (), + GPGSM_NAME EXTSEP_S "conf", + NULL); + else + opt.config_filename = last_configname; if (log_get_errorcount(0)) { gpgsm_status_with_error (&ctrl, STATUS_FAILURE, "option-parser", gpg_error (GPG_ERR_GENERAL)); gpgsm_exit(2); } if (pwfd != -1) /* Read the passphrase now. */ read_passphrase_from_fd (pwfd); /* Now that we have the options parsed we need to update the default control structure. */ gpgsm_init_default_ctrl (&ctrl); if (nogreeting) greeting = 0; if (greeting) { es_fprintf (es_stderr, "%s %s; %s\n", - strusage(11), strusage(13), strusage(14) ); - es_fprintf (es_stderr, "%s\n", strusage(15) ); + gpgrt_strusage(11), gpgrt_strusage(13), gpgrt_strusage(14) ); + es_fprintf (es_stderr, "%s\n", gpgrt_strusage(15) ); } # ifdef IS_DEVELOPMENT_VERSION if (!opt.batch) { log_info ("NOTE: THIS IS A DEVELOPMENT VERSION!\n"); log_info ("It is only intended for test purposes and should NOT be\n"); log_info ("used in a production environment or with production keys!\n"); } # endif if (may_coredump && !opt.quiet) log_info (_("WARNING: program may create a core file!\n")); /* if (opt.qualsig_approval && !opt.quiet) */ /* log_info (_("This software has officially been approved to " */ /* "create and verify\n" */ /* "qualified signatures according to German law.\n")); */ if (logfile && cmd == aServer) { log_set_file (logfile); log_set_prefix (NULL, GPGRT_LOG_WITH_PREFIX | GPGRT_LOG_WITH_TIME | GPGRT_LOG_WITH_PID); } if (gnupg_faked_time_p ()) { gnupg_isotime_t tbuf; log_info (_("WARNING: running with faked system time: ")); gnupg_get_isotime (tbuf); dump_isotime (tbuf); log_printf ("\n"); } /* Print a warning if an argument looks like an option. */ if (!opt.quiet && !(pargs.flags & ARGPARSE_FLAG_STOP_SEEN)) { int i; for (i=0; i < argc; i++) if (argv[i][0] == '-' && argv[i][1] == '-') log_info (_("Note: '%s' is not considered an option\n"), argv[i]); } /*FIXME if (opt.batch) */ /* tty_batchmode (1); */ gcry_control (GCRYCTL_RESUME_SECMEM_WARN); set_debug (); /* Although we always use gpgsm_exit, we better install a regular exit handler so that at least the secure memory gets wiped out. */ if (atexit (emergency_cleanup)) { log_error ("atexit failed\n"); gpgsm_exit (2); } /* Must do this after dropping setuid, because the mapping functions may try to load an module and we may have disabled an algorithm. We remap the commonly used algorithms to the OIDs for convenience. We need to work with the OIDs because they are used to check whether the encryption mode is actually available. */ if (!strcmp (opt.def_cipher_algoid, "3DES") ) opt.def_cipher_algoid = "1.2.840.113549.3.7"; else if (!strcmp (opt.def_cipher_algoid, "AES") || !strcmp (opt.def_cipher_algoid, "AES128")) opt.def_cipher_algoid = "2.16.840.1.101.3.4.1.2"; else if (!strcmp (opt.def_cipher_algoid, "AES192") ) opt.def_cipher_algoid = "2.16.840.1.101.3.4.1.22"; else if (!strcmp (opt.def_cipher_algoid, "AES256") ) opt.def_cipher_algoid = "2.16.840.1.101.3.4.1.42"; else if (!strcmp (opt.def_cipher_algoid, "SERPENT") || !strcmp (opt.def_cipher_algoid, "SERPENT128") ) opt.def_cipher_algoid = "1.3.6.1.4.1.11591.13.2.2"; else if (!strcmp (opt.def_cipher_algoid, "SERPENT192") ) opt.def_cipher_algoid = "1.3.6.1.4.1.11591.13.2.22"; else if (!strcmp (opt.def_cipher_algoid, "SERPENT256") ) opt.def_cipher_algoid = "1.3.6.1.4.1.11591.13.2.42"; else if (!strcmp (opt.def_cipher_algoid, "SEED") ) opt.def_cipher_algoid = "1.2.410.200004.1.4"; else if (!strcmp (opt.def_cipher_algoid, "CAMELLIA") || !strcmp (opt.def_cipher_algoid, "CAMELLIA128") ) opt.def_cipher_algoid = "1.2.392.200011.61.1.1.1.2"; else if (!strcmp (opt.def_cipher_algoid, "CAMELLIA192") ) opt.def_cipher_algoid = "1.2.392.200011.61.1.1.1.3"; else if (!strcmp (opt.def_cipher_algoid, "CAMELLIA256") ) opt.def_cipher_algoid = "1.2.392.200011.61.1.1.1.4"; if (cmd != aGPGConfList) { if ( !gcry_cipher_map_name (opt.def_cipher_algoid) || !gcry_cipher_mode_from_oid (opt.def_cipher_algoid)) log_error (_("selected cipher algorithm is invalid\n")); if (forced_digest_algo) { opt.forced_digest_algo = gcry_md_map_name (forced_digest_algo); if (our_md_test_algo(opt.forced_digest_algo) ) log_error (_("selected digest algorithm is invalid\n")); } if (extra_digest_algo) { opt.extra_digest_algo = gcry_md_map_name (extra_digest_algo); if (our_md_test_algo (opt.extra_digest_algo) ) log_error (_("selected digest algorithm is invalid\n")); } } /* Check our chosen algorithms against the list of allowed * algorithms in the current compliance mode, and fail hard if it is * not. This is us being nice to the user informing her early that * the chosen algorithms are not available. We also check and * enforce this right before the actual operation. */ if (! gnupg_cipher_is_allowed (opt.compliance, cmd == aEncr || cmd == aSignEncr, gcry_cipher_map_name (opt.def_cipher_algoid), GCRY_CIPHER_MODE_NONE) && ! gnupg_cipher_is_allowed (opt.compliance, cmd == aEncr || cmd == aSignEncr, gcry_cipher_mode_from_oid (opt.def_cipher_algoid), GCRY_CIPHER_MODE_NONE)) log_error (_("cipher algorithm '%s' may not be used in %s mode\n"), opt.def_cipher_algoid, gnupg_compliance_option_string (opt.compliance)); if (forced_digest_algo && ! gnupg_digest_is_allowed (opt.compliance, cmd == aSign || cmd == aSignEncr || cmd == aClearsign, opt.forced_digest_algo)) log_error (_("digest algorithm '%s' may not be used in %s mode\n"), forced_digest_algo, gnupg_compliance_option_string (opt.compliance)); if (extra_digest_algo && ! gnupg_digest_is_allowed (opt.compliance, cmd == aSign || cmd == aSignEncr || cmd == aClearsign, opt.extra_digest_algo)) log_error (_("digest algorithm '%s' may not be used in %s mode\n"), extra_digest_algo, gnupg_compliance_option_string (opt.compliance)); if (log_get_errorcount(0)) { gpgsm_status_with_error (&ctrl, STATUS_FAILURE, "option-postprocessing", gpg_error (GPG_ERR_GENERAL)); gpgsm_exit (2); } /* Set the random seed file. */ if (use_random_seed) { char *p = make_filename (gnupg_homedir (), "random_seed", NULL); gcry_control (GCRYCTL_SET_RANDOM_SEED_FILE, p); xfree(p); } if (!cmd && opt.fingerprint && !with_fpr) set_cmd (&cmd, aListKeys); /* If no pinentry is expected shunt * gnupg_allow_set_foregound_window to avoid useless error * messages on Windows. */ if (opt.pinentry_mode != PINENTRY_MODE_ASK) { gnupg_inhibit_set_foregound_window (1); } /* Add default keybox. */ if (!nrings && default_keyring) { int created; keydb_add_resource (&ctrl, "pubring.kbx", 0, &created); if (created && !no_common_certs_import) { /* Import the standard certificates for a new default keybox. */ char *filelist[2]; filelist[0] = make_filename (gnupg_datadir (),"com-certs.pem", NULL); filelist[1] = NULL; if (!access (filelist[0], F_OK)) { log_info (_("importing common certificates '%s'\n"), filelist[0]); gpgsm_import_files (&ctrl, 1, filelist, open_read); } xfree (filelist[0]); } } for (sl = nrings; sl; sl = sl->next) keydb_add_resource (&ctrl, sl->d, 0, NULL); FREE_STRLIST(nrings); /* Prepare the audit log feature for certain commands. */ if (auditlog || htmlauditlog) { switch (cmd) { case aEncr: case aSign: case aDecrypt: case aVerify: audit_release (ctrl.audit); ctrl.audit = audit_new (); if (auditlog) auditfp = open_es_fwrite (auditlog); if (htmlauditlog) htmlauditfp = open_es_fwrite (htmlauditlog); break; default: break; } } if (!do_not_setup_keys) { int errcount = log_get_errorcount (0); for (sl = locusr; sl ; sl = sl->next) { int rc = gpgsm_add_to_certlist (&ctrl, sl->d, 1, &signerlist, 0); if (rc) { log_error (_("can't sign using '%s': %s\n"), sl->d, gpg_strerror (rc)); gpgsm_status2 (&ctrl, STATUS_INV_SGNR, get_inv_recpsgnr_code (rc), sl->d, NULL); gpgsm_status2 (&ctrl, STATUS_INV_RECP, get_inv_recpsgnr_code (rc), sl->d, NULL); } } /* Build the recipient list. We first add the regular ones and then the encrypt-to ones because the underlying function will silently ignore duplicates and we can't allow keeping a duplicate which is flagged as encrypt-to as the actually encrypt function would then complain about no (regular) recipients. */ for (sl = remusr; sl; sl = sl->next) if (!(sl->flags & 1)) do_add_recipient (&ctrl, sl->d, &recplist, 0, recp_required); if (!opt.no_encrypt_to) { for (sl = remusr; sl; sl = sl->next) if ((sl->flags & 1)) do_add_recipient (&ctrl, sl->d, &recplist, 1, recp_required); } /* We do not require a recipient for decryption but because * recipients and signers are always checked and log_error is * sometimes used (for failed signing keys or due to a failed * CRL checking) that would have bumbed up the error counter. * We clear the counter in the decryption case because there is * no reason to force decryption to fail. */ if (cmd == aDecrypt && !errcount) log_get_errorcount (1); /* clear counter */ } if (log_get_errorcount(0)) gpgsm_exit(1); /* Must stop for invalid recipients. */ /* Dispatch command. */ switch (cmd) { case aGPGConfList: { /* List options and default values in the GPG Conf format. */ char *config_filename_esc = percent_escape (opt.config_filename, NULL); es_printf ("%s-%s.conf:%lu:\"%s\n", GPGCONF_NAME, GPGSM_NAME, GC_OPT_FLAG_DEFAULT, config_filename_esc); xfree (config_filename_esc); es_printf ("verbose:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("quiet:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("debug-level:%lu:\"none:\n", GC_OPT_FLAG_DEFAULT); es_printf ("log-file:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("disable-crl-checks:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("enable-crl-checks:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("disable-trusted-cert-crl-check:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("enable-ocsp:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("include-certs:%lu:%d:\n", GC_OPT_FLAG_DEFAULT, DEFAULT_INCLUDE_CERTS); es_printf ("disable-policy-checks:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("auto-issuer-key-retrieve:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("disable-dirmngr:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("cipher-algo:%lu:\"%s:\n", GC_OPT_FLAG_DEFAULT, DEFAULT_CIPHER_ALGO); es_printf ("p12-charset:%lu:\n", GC_OPT_FLAG_DEFAULT); es_printf ("default-key:%lu:\n", GC_OPT_FLAG_DEFAULT); es_printf ("encrypt-to:%lu:\n", GC_OPT_FLAG_DEFAULT); es_printf ("keyserver:%lu:\n", GC_OPT_FLAG_NONE); /* The next one is an info only item and should match what proc_parameters actually implements. */ es_printf ("default_pubkey_algo:%lu:\"%s:\n", GC_OPT_FLAG_DEFAULT, "RSA-3072"); } break; case aGPGConfTest: /* This is merely a dummy command to test whether the configuration file is valid. */ break; case aServer: if (debug_wait) { log_debug ("waiting for debugger - my pid is %u .....\n", (unsigned int)getpid()); gnupg_sleep (debug_wait); log_debug ("... okay\n"); } gpgsm_server (recplist); break; case aCallDirmngr: if (!argc) wrong_args ("--call-dirmngr {args}"); else if (gpgsm_dirmngr_run_command (&ctrl, *argv, argc-1, argv+1)) gpgsm_exit (1); break; case aCallProtectTool: run_protect_tool (argc, argv); break; case aEncr: /* Encrypt the given file. */ { estream_t fp = open_es_fwrite (opt.outfile?opt.outfile:"-"); set_binary (stdin); if (!argc) /* Source is stdin. */ gpgsm_encrypt (&ctrl, recplist, 0, fp); else if (argc == 1) /* Source is the given file. */ gpgsm_encrypt (&ctrl, recplist, open_read (*argv), fp); else wrong_args ("--encrypt [datafile]"); es_fclose (fp); } break; case aSign: /* Sign the given file. */ { estream_t fp = open_es_fwrite (opt.outfile?opt.outfile:"-"); /* Fixme: We should also allow concatenation of multiple files for signing because that is what gpg does.*/ set_binary (stdin); if (!argc) /* Create from stdin. */ gpgsm_sign (&ctrl, signerlist, 0, detached_sig, fp); else if (argc == 1) /* From file. */ gpgsm_sign (&ctrl, signerlist, open_read (*argv), detached_sig, fp); else wrong_args ("--sign [datafile]"); es_fclose (fp); } break; case aSignEncr: /* sign and encrypt the given file */ log_error ("this command has not yet been implemented\n"); break; case aClearsign: /* make a clearsig */ log_error ("this command has not yet been implemented\n"); break; case aVerify: { estream_t fp = NULL; set_binary (stdin); if (argc == 2 && opt.outfile) log_info ("option --output ignored for a detached signature\n"); else if (opt.outfile) fp = open_es_fwrite (opt.outfile); if (!argc) gpgsm_verify (&ctrl, 0, -1, fp); /* normal signature from stdin */ else if (argc == 1) gpgsm_verify (&ctrl, open_read (*argv), -1, fp); /* std signature */ else if (argc == 2) /* detached signature (sig, detached) */ gpgsm_verify (&ctrl, open_read (*argv), open_read (argv[1]), NULL); else wrong_args ("--verify [signature [detached_data]]"); es_fclose (fp); } break; case aDecrypt: { estream_t fp = open_es_fwrite (opt.outfile?opt.outfile:"-"); set_binary (stdin); if (!argc) gpgsm_decrypt (&ctrl, 0, fp); /* from stdin */ else if (argc == 1) gpgsm_decrypt (&ctrl, open_read (*argv), fp); /* from file */ else wrong_args ("--decrypt [filename]"); es_fclose (fp); } break; case aDeleteKey: for (sl=NULL; argc; argc--, argv++) add_to_strlist (&sl, *argv); gpgsm_delete (&ctrl, sl); free_strlist(sl); break; case aListChain: case aDumpChain: ctrl.with_chain = 1; /* fall through */ case aListKeys: case aDumpKeys: case aListExternalKeys: case aDumpExternalKeys: case aListSecretKeys: case aDumpSecretKeys: { unsigned int mode; estream_t fp; switch (cmd) { case aListChain: case aListKeys: mode = (0 | 0 | (1<<6)); break; case aDumpChain: case aDumpKeys: mode = (256 | 0 | (1<<6)); break; case aListExternalKeys: mode = (0 | 0 | (1<<7)); break; case aDumpExternalKeys: mode = (256 | 0 | (1<<7)); break; case aListSecretKeys: mode = (0 | 2 | (1<<6)); break; case aDumpSecretKeys: mode = (256 | 2 | (1<<6)); break; default: BUG(); } fp = open_es_fwrite (opt.outfile?opt.outfile:"-"); for (sl=NULL; argc; argc--, argv++) add_to_strlist (&sl, *argv); gpgsm_list_keys (&ctrl, sl, fp, mode); free_strlist(sl); es_fclose (fp); } break; case aKeygen: /* Generate a key; well kind of. */ { estream_t fpin = NULL; estream_t fpout; if (opt.batch) { if (!argc) /* Create from stdin. */ fpin = open_es_fread ("-", "r"); else if (argc == 1) /* From file. */ fpin = open_es_fread (*argv, "r"); else wrong_args ("--generate-key --batch [parmfile]"); } fpout = open_es_fwrite (opt.outfile?opt.outfile:"-"); if (fpin) gpgsm_genkey (&ctrl, fpin, fpout); else gpgsm_gencertreq_tty (&ctrl, fpout); es_fclose (fpout); } break; case aImport: gpgsm_import_files (&ctrl, argc, argv, open_read); break; case aExport: { estream_t fp; fp = open_es_fwrite (opt.outfile?opt.outfile:"-"); for (sl=NULL; argc; argc--, argv++) add_to_strlist (&sl, *argv); gpgsm_export (&ctrl, sl, fp); free_strlist(sl); es_fclose (fp); } break; case aExportSecretKeyP12: { estream_t fp = open_es_fwrite (opt.outfile?opt.outfile:"-"); if (argc == 1) gpgsm_p12_export (&ctrl, *argv, fp, 0); else wrong_args ("--export-secret-key-p12 KEY-ID"); if (fp != es_stdout) es_fclose (fp); } break; case aExportSecretKeyP8: { estream_t fp = open_es_fwrite (opt.outfile?opt.outfile:"-"); if (argc == 1) gpgsm_p12_export (&ctrl, *argv, fp, 1); else wrong_args ("--export-secret-key-p8 KEY-ID"); if (fp != es_stdout) es_fclose (fp); } break; case aExportSecretKeyRaw: { estream_t fp = open_es_fwrite (opt.outfile?opt.outfile:"-"); if (argc == 1) gpgsm_p12_export (&ctrl, *argv, fp, 2); else wrong_args ("--export-secret-key-raw KEY-ID"); if (fp != es_stdout) es_fclose (fp); } break; case aSendKeys: case aRecvKeys: log_error ("this command has not yet been implemented\n"); break; case aLearnCard: if (argc) wrong_args ("--learn-card"); else { int rc = gpgsm_agent_learn (&ctrl); if (rc) log_error ("error learning card: %s\n", gpg_strerror (rc)); } break; case aPasswd: if (argc != 1) wrong_args ("--change-passphrase "); else { int rc; ksba_cert_t cert = NULL; char *grip = NULL; rc = gpgsm_find_cert (&ctrl, *argv, NULL, &cert, 0); if (rc) ; else if (!(grip = gpgsm_get_keygrip_hexstring (cert))) rc = gpg_error (GPG_ERR_BUG); else { char *desc = gpgsm_format_keydesc (cert); rc = gpgsm_agent_passwd (&ctrl, grip, desc); xfree (desc); } if (rc) log_error ("error changing passphrase: %s\n", gpg_strerror (rc)); xfree (grip); ksba_cert_release (cert); } break; case aKeydbClearSomeCertFlags: for (sl=NULL; argc; argc--, argv++) add_to_strlist (&sl, *argv); keydb_clear_some_cert_flags (&ctrl, sl); free_strlist(sl); break; default: log_error (_("invalid command (there is no implicit command)\n")); break; } /* Print the audit result if needed. */ if ((auditlog && auditfp) || (htmlauditlog && htmlauditfp)) { if (auditlog && auditfp) audit_print_result (ctrl.audit, auditfp, 0); if (htmlauditlog && htmlauditfp) audit_print_result (ctrl.audit, htmlauditfp, 1); audit_release (ctrl.audit); ctrl.audit = NULL; es_fclose (auditfp); es_fclose (htmlauditfp); } /* cleanup */ keyserver_list_free (opt.keyserver); opt.keyserver = NULL; gpgsm_release_certlist (recplist); gpgsm_release_certlist (signerlist); FREE_STRLIST (remusr); FREE_STRLIST (locusr); gpgsm_exit(0); return 8; /*NOTREACHED*/ } /* Note: This function is used by signal handlers!. */ static void emergency_cleanup (void) { gcry_control (GCRYCTL_TERM_SECMEM ); } void gpgsm_exit (int rc) { gcry_control (GCRYCTL_UPDATE_RANDOM_SEED_FILE); if (opt.debug & DBG_MEMSTAT_VALUE) { gcry_control( GCRYCTL_DUMP_MEMORY_STATS ); gcry_control( GCRYCTL_DUMP_RANDOM_STATS ); } if (opt.debug) gcry_control (GCRYCTL_DUMP_SECMEM_STATS ); emergency_cleanup (); rc = rc? rc : log_get_errorcount(0)? 2 : gpgsm_errors_seen? 1 : 0; exit (rc); } void gpgsm_init_default_ctrl (struct server_control_s *ctrl) { ctrl->include_certs = default_include_certs; ctrl->use_ocsp = opt.enable_ocsp; ctrl->validation_model = default_validation_model; ctrl->offline = opt.disable_dirmngr; } int gpgsm_parse_validation_model (const char *model) { if (!ascii_strcasecmp (model, "shell") ) return 0; else if ( !ascii_strcasecmp (model, "chain") ) return 1; else if ( !ascii_strcasecmp (model, "steed") ) return 2; else return -1; } /* Open the FILENAME for read and return the file descriptor. Stop with an error message in case of problems. "-" denotes stdin and if special filenames are allowed the given fd is opened instead. */ static int open_read (const char *filename) { int fd; if (filename[0] == '-' && !filename[1]) { set_binary (stdin); return 0; /* stdin */ } fd = check_special_filename (filename, 0, 0); if (fd != -1) return fd; fd = open (filename, O_RDONLY | O_BINARY); if (fd == -1) { log_error (_("can't open '%s': %s\n"), filename, strerror (errno)); gpgsm_exit (2); } return fd; } /* Same as open_read but return an estream_t. */ static estream_t open_es_fread (const char *filename, const char *mode) { int fd; estream_t fp; if (filename[0] == '-' && !filename[1]) fd = fileno (stdin); else fd = check_special_filename (filename, 0, 0); if (fd != -1) { fp = es_fdopen_nc (fd, mode); if (!fp) { log_error ("es_fdopen(%d) failed: %s\n", fd, strerror (errno)); gpgsm_exit (2); } return fp; } fp = es_fopen (filename, mode); if (!fp) { log_error (_("can't open '%s': %s\n"), filename, strerror (errno)); gpgsm_exit (2); } return fp; } /* Open FILENAME for fwrite and return an extended stream. Stop with an error message in case of problems. "-" denotes stdout and if special filenames are allowed the given fd is opened instead. Caller must close the returned stream. */ static estream_t open_es_fwrite (const char *filename) { int fd; estream_t fp; if (filename[0] == '-' && !filename[1]) { fflush (stdout); fp = es_fdopen_nc (fileno(stdout), "wb"); return fp; } fd = check_special_filename (filename, 1, 0); if (fd != -1) { fp = es_fdopen_nc (fd, "wb"); if (!fp) { log_error ("es_fdopen(%d) failed: %s\n", fd, strerror (errno)); gpgsm_exit (2); } return fp; } fp = es_fopen (filename, "wb"); if (!fp) { log_error (_("can't open '%s': %s\n"), filename, strerror (errno)); gpgsm_exit (2); } return fp; } static void run_protect_tool (int argc, char **argv) { #ifdef HAVE_W32_SYSTEM (void)argc; (void)argv; #else const char *pgm; char **av; int i; if (!opt.protect_tool_program || !*opt.protect_tool_program) pgm = gnupg_module_name (GNUPG_MODULE_NAME_PROTECT_TOOL); else pgm = opt.protect_tool_program; av = xcalloc (argc+2, sizeof *av); av[0] = strrchr (pgm, '/'); if (!av[0]) av[0] = xstrdup (pgm); for (i=1; argc; i++, argc--, argv++) av[i] = *argv; av[i] = NULL; execv (pgm, av); log_error ("error executing '%s': %s\n", pgm, strerror (errno)); #endif /*!HAVE_W32_SYSTEM*/ gpgsm_exit (2); }