diff --git a/po/zh_TW.po b/po/zh_TW.po index c72785bc6..c3b52c975 100644 --- a/po/zh_TW.po +++ b/po/zh_TW.po @@ -1,7167 +1,7171 @@ # Traditional Chinese(zh-tw) messages for GnuPG # Copyright (C) 2002 Free Software Foundation, Inc. # This file is distributed under the same license as the PACKAGE package. # Jedi Lin , 2003~2013. # # Special thanks to "Audrey Tang ". # msgid "" msgstr "" "Project-Id-Version: GNU gnupg 2.0.27\n" "Report-Msgid-Bugs-To: translations@gnupg.org\n" -"PO-Revision-Date: 2014-11-17 13:03+0800\n" +"PO-Revision-Date: 2014-11-21 23:15+0800\n" "Last-Translator: Jedi Lin \n" "Language-Team: Chinese (traditional) \n" "Language: zh_TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Poedit-Basepath: gnupg-2.0.27/\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Poedit 1.5.7\n" #, c-format msgid "failed to acquire the pinentry lock: %s\n" msgstr "個人識別碼項目鎖定獲取失敗: %s\n" #. TRANSLATORS: These are labels for buttons etc used in #. Pinentries. An underscore indicates that the next letter #. should be used as an accelerator. Double the underscore for #. a literal one. The actual to be translated text starts after #. the second vertical bar. msgid "|pinentry-label|_OK" msgstr "|pinentry-label|_OK" msgid "|pinentry-label|_Cancel" msgstr "|pinentry-label|取消 (_C)" msgid "|pinentry-label|PIN:" msgstr "|pinentry-label|個人識別碼 (PIN):" #. TRANSLATORS: This string is displayed by Pinentry as the label #. for the quality bar. msgid "Quality:" msgstr "品質: %s" #. TRANSLATORS: This string is a tooltip, shown by pinentry when #. hovering over the quality bar. Please use an appropriate #. string to describe what this is about. The length of the #. tooltip is limited to about 900 characters. If you do not #. translate this entry, a default english text (see source) #. will be used. msgid "pinentry.qualitybar.tooltip" msgstr "" "輸入在上面的文字的品質.\n" "關於此規範的細節, 請洽你的系統管理者." msgid "" "Please enter your PIN, so that the secret key can be unlocked for this " "session" msgstr "請輸入你的個人識別碼 (PIN) 以便在此階段作業中解開密鑰" msgid "" "Please enter your passphrase, so that the secret key can be unlocked for " "this session" msgstr "請輸入你的密語以便在此階段作業中解開私鑰" #. TRANSLATORS: The string is appended to an error message in #. the pinentry. The %s is the actual error message, the #. two %d give the current and maximum number of tries. #, c-format msgid "SETERROR %s (try %d of %d)" msgstr "設定錯誤 %s (第 %d 次嘗試, 最多 %d 次)" msgid "PIN too long" msgstr "個人識別碼 (PIN) 太長" msgid "Passphrase too long" msgstr "密語太長" msgid "Invalid characters in PIN" msgstr "個人識別碼 (PIN) 含有無效的字符" msgid "PIN too short" msgstr "個人識別碼 (PIN) 太短" msgid "Bad PIN" msgstr "不良的個人識別碼 (PIN)" msgid "Bad Passphrase" msgstr "不良的密語" msgid "Passphrase" msgstr "密語" #, c-format msgid "ssh keys greater than %d bits are not supported\n" msgstr "未支援大於 %d 位元的 ssh 金鑰\n" #, c-format msgid "can't create `%s': %s\n" msgstr "無法建立 `%s': %s\n" #, c-format msgid "can't open `%s': %s\n" msgstr "無法開啟 `%s': %s\n" #, c-format msgid "error getting serial number of card: %s\n" msgstr "取得此卡片序號時出錯: %s\n" #, c-format msgid "detected card with S/N: %s\n" msgstr "偵測到卡片, 其序號為: %s\n" #, c-format msgid "error getting default authentication keyID of card: %s\n" msgstr "取得此卡片的預設認證金鑰 ID 時出錯: %s\n" #, c-format msgid "no suitable card key found: %s\n" msgstr "找不到合適的卡片金鑰: %s\n" #, c-format msgid "shadowing the key failed: %s\n" msgstr "遮蔽金鑰時失敗: %s\n" #, c-format msgid "error writing key: %s\n" msgstr "寫入金鑰時出錯: %s\n" #, c-format msgid "" "An ssh process requested the use of key%%0A %s%%0A (%s)%%0ADo you want to " "allow this?" msgstr "" "有某個 ssh 程序提出使用金鑰 %%0A %s%%0A (%s)%%0A 之請求, 請問是否允許?" msgid "Allow" msgstr "允許" msgid "Deny" msgstr "拒絕" #, c-format msgid "Please enter the passphrase for the ssh key%%0A %F%%0A (%c)" msgstr "請輸入此 ssh 金鑰的密語 %%0A %F%%0A (%c)" msgid "Please re-enter this passphrase" msgstr "請再次輸入密語" #, c-format msgid "" "Please enter a passphrase to protect the received secret key%%0A %s%%0A " "%s%%0Awithin gpg-agent's key storage" msgstr "" "請輸入密語以保護收到的私鑰 %%0A %s%%0A %s%%0A 於 gpg-agent 的金鑰存放處" msgid "does not match - try again" msgstr "前後不一致 - 請再試一次" #, c-format msgid "failed to create stream from socket: %s\n" msgstr "從 socket 建立串流失敗: %s\n" msgid "Please insert the card with serial number" msgstr "請插入下列序號的卡片:" msgid "Please remove the current card and insert the one with serial number" msgstr "請移除現用中的卡片並插入下列序號的卡片:" msgid "Admin PIN" msgstr "管理者個人識別碼 (PIN)" #. TRANSLATORS: A PUK is the Personal Unblocking Code #. used to unblock a PIN. msgid "PUK" msgstr "PIN 重設碼 (PUK)" msgid "Reset Code" msgstr "重設碼" #, c-format msgid "%s%%0A%%0AUse the reader's pinpad for input." msgstr "%s%%0A%%0A使用讀卡機的鍵盤來輸入." msgid "Repeat this Reset Code" msgstr "請再次輸入重設碼" msgid "Repeat this PUK" msgstr "請再次輸入 PUK" msgid "Repeat this PIN" msgstr "請再次輸入個人識別碼 (PIN)" msgid "Reset Code not correctly repeated; try again" msgstr "前後兩次輸入的重設碼不一致; 請再試一次" msgid "PUK not correctly repeated; try again" msgstr "前後兩次輸入的 PUK 不一致; 請再試一次" msgid "PIN not correctly repeated; try again" msgstr "前後兩次輸入的個人識別碼 (PIN) 不一致; 請再試一次" #, c-format msgid "Please enter the PIN%s%s%s to unlock the card" msgstr "請輸入個人識別碼 (PIN)%s%s%s 以解開卡片" #, c-format msgid "error creating temporary file: %s\n" msgstr "建立暫存檔時出錯: %s\n" #, c-format msgid "error writing to temporary file: %s\n" msgstr "寫入暫存檔時出錯: %s\n" msgid "Enter new passphrase" msgstr "請輸入新密語" msgid "Take this one anyway" msgstr "無論如何還是要用這個" #, c-format msgid "" "Warning: You have entered an insecure passphrase.%%0AA passphrase should be " "at least %u character long." msgid_plural "" "Warning: You have entered an insecure passphrase.%%0AA passphrase should be " "at least %u characters long." msgstr[0] "警告: 你輸入了不安全的密語.%%0A密語至少得要有 %u 個字符長." #, c-format msgid "" "Warning: You have entered an insecure passphrase.%%0AA passphrase should " "contain at least %u digit or%%0Aspecial character." msgid_plural "" "Warning: You have entered an insecure passphrase.%%0AA passphrase should " "contain at least %u digits or%%0Aspecial characters." msgstr[0] "" "警告: 你輸入了不安全的密語.%%0A密語至少得要含有 %u 個數字或特別字符." #, c-format msgid "" "Warning: You have entered an insecure passphrase.%%0AA passphrase may not be " "a known term or match%%0Acertain pattern." msgstr "" "警告: 你輸入了不安全的密語.%%0A密語不得含有已知的詞彙, 亦不得與確知的樣式吻" "合." #, c-format msgid "" "You have not entered a passphrase!%0AAn empty passphrase is not allowed." msgstr "你還沒有輸入密語!%0A空密語是不行的." #, c-format msgid "" "You have not entered a passphrase - this is in general a bad idea!%0APlease " "confirm that you do not want to have any protection on your key." msgstr "" "你還沒有輸入密語 - 通常這可不是個好主意!%0A請確認你不想要對你的金鑰做任何保" "護." msgid "Yes, protection is not needed" msgstr "是, 不需要任何保護" #, c-format msgid "Please enter the passphrase to%0Aprotect your new key" msgstr "請輸入密語至%0A以保護你的新金鑰" msgid "Please enter the new passphrase" msgstr "請輸入新的密語" msgid "" "@Options:\n" " " msgstr "" "@選項:\n" " " msgid "run in daemon mode (background)" msgstr "以服務模式執行 (背景)" msgid "run in server mode (foreground)" msgstr "以伺服器模式執行 (前景)" msgid "verbose" msgstr "囉唆模式" msgid "be somewhat more quiet" msgstr "盡量安靜些" msgid "sh-style command output" msgstr "sh 樣式的指令輸出" msgid "csh-style command output" msgstr "csh 樣式的指令輸出" msgid "|FILE|read options from FILE" -msgstr "|檔案|從「檔案」中讀取選項" +msgstr "|檔案|從指定檔案中讀取選項" msgid "do not detach from the console" msgstr "不要從 console 分離" msgid "do not grab keyboard and mouse" msgstr "不要奪取鍵盤及滑鼠" msgid "use a log file for the server" msgstr "為伺服器使用日誌檔" msgid "use a standard location for the socket" msgstr "為 socket 使用標準的位置" msgid "|PGM|use PGM as the PIN-Entry program" msgstr "|PGM|使用 PGM 做為 PIN-Entry 程式" msgid "|PGM|use PGM as the SCdaemon program" msgstr "|PGM|使用 PGM 做為 SCdaemon 程式" msgid "do not use the SCdaemon" msgstr "不要使用 SCdaemon" msgid "ignore requests to change the TTY" msgstr "忽略變更 TTY 的要求" msgid "ignore requests to change the X display" msgstr "忽略變更 X display 的要求" msgid "|N|expire cached PINs after N seconds" msgstr "|N|讓快取住的個人識別碼 (PIN) 在 N 秒後到期" msgid "do not use the PIN cache when signing" msgstr "簽署時不要使用個人識別碼 (PIN) 快取" msgid "disallow clients to mark keys as \"trusted\"" msgstr "不允許用戶端將金鑰標記為 \"已信任\"" msgid "allow presetting passphrase" msgstr "允許預先設定密語" msgid "enable ssh support" msgstr "啟用 ssh 支援" msgid "enable putty support" msgstr "啟用 putty 支援" msgid "|FILE|write environment settings also to FILE" -msgstr "|檔案|將環境設定也寫至「檔案」" +msgstr "|檔案|將環境設定也寫至指定檔案" #. TRANSLATORS: @EMAIL@ will get replaced by the actual bug #. reporting address. This is so that we can change the #. reporting address without breaking the translations. msgid "Please report bugs to <@EMAIL@>.\n" msgstr "翻譯瑕疵請回報給 , 程式瑕疵則請回報給 <@EMAIL@>.\n" msgid "Usage: gpg-agent [options] (-h for help)" msgstr "用法: gpg-agent [選項] (或用 -h 求助)" msgid "" "Syntax: gpg-agent [options] [command [args]]\n" "Secret key management for GnuPG\n" msgstr "" "語法: gpg-agent [選項] [指令 [引數]]\n" "GnuPG 私鑰管理\n" #, c-format msgid "invalid debug-level `%s' given\n" msgstr "給定的除錯等級 `%s' 無效\n" #, c-format msgid "%s is too old (need %s, have %s)\n" msgstr "%s 太舊了 (需要 %s, 但是祇有 %s)\n" #, c-format msgid "NOTE: no default option file `%s'\n" msgstr "請注意: 沒有預設選項檔 `%s'\n" #, c-format msgid "option file `%s': %s\n" msgstr "選項檔 `%s': %s\n" #, c-format msgid "reading options from `%s'\n" msgstr "從 `%s' 讀取選項中\n" #, c-format msgid "error creating `%s': %s\n" msgstr "建立 `%s' 時出錯: %s\n" #, c-format msgid "can't create directory `%s': %s\n" msgstr "無法建立目錄 `%s': %s\n" msgid "name of socket too long\n" msgstr "socket 名稱太長\n" #, c-format msgid "can't create socket: %s\n" msgstr "無法建立 socket: %s\n" #, c-format msgid "socket name `%s' is too long\n" msgstr "socket 名稱 `%s' 太長\n" msgid "a gpg-agent is already running - not starting a new one\n" msgstr "已經有一份 gpg-agent 在執行了 - 不會再啟動一份新的\n" msgid "error getting nonce for the socket\n" msgstr "為 socket 取得 nonce 時出錯\n" #, c-format msgid "error binding socket to `%s': %s\n" msgstr "綁定 socket 至 `%s' 時出錯: %s\n" #, c-format msgid "listen() failed: %s\n" msgstr "listen() 失敗: %s\n" #, c-format msgid "listening on socket `%s'\n" msgstr "正在候聽 socket `%s'\n" #, c-format msgid "directory `%s' created\n" msgstr "`%s' 目錄已建立\n" #, c-format msgid "stat() failed for `%s': %s\n" msgstr "stat() 失敗於 `%s': %s\n" #, c-format msgid "can't use `%s' as home directory\n" msgstr "無法使用 `%s' 做為家目錄\n" #, c-format msgid "error reading nonce on fd %d: %s\n" msgstr "於 fd %d 讀取 nonce 時出錯: %s\n" #, c-format msgid "handler 0x%lx for fd %d started\n" msgstr "經手程式 0x%lx (用於 fd %d) 已啟動\n" #, c-format msgid "handler 0x%lx for fd %d terminated\n" msgstr "經手程式 0x%lx (用於 fd %d) 已終止\n" #, c-format msgid "ssh handler 0x%lx for fd %d started\n" msgstr "ssh 經手程式 0x%lx (用於 fd %d) 已啟動\n" #, c-format msgid "ssh handler 0x%lx for fd %d terminated\n" msgstr "ssh 經手程式 0x%lx (用於 fd %d) 已終止\n" #, c-format msgid "pth_select failed: %s - waiting 1s\n" msgstr "pth_select 失敗: %s - 等 1 秒鐘\n" #, c-format msgid "%s %s stopped\n" msgstr "%s %s 已停止\n" msgid "no gpg-agent running in this session\n" msgstr "在此階段中沒有執行中的 gpg-agent\n" msgid "malformed GPG_AGENT_INFO environment variable\n" msgstr "格式不對的 GPG_AGENT_INFO 環境變數\n" #, c-format msgid "gpg-agent protocol version %d is not supported\n" msgstr "gpg-agent 協定版本 %d 未被支援\n" msgid "Usage: gpg-preset-passphrase [options] KEYGRIP (-h for help)\n" msgstr "用法: gpg-preset-passphrase [選項] 金鑰鑰柄 (或用 -h 求助)\n" msgid "" "Syntax: gpg-preset-passphrase [options] KEYGRIP\n" "Password cache maintenance\n" msgstr "" "語法: gpg-preset-passphrase [選項] 金鑰鑰柄\n" "密碼快取維護\n" msgid "" "@Commands:\n" " " msgstr "" "@指令:\n" " " msgid "" "@\n" "Options:\n" " " msgstr "" "@\n" "選項:\n" " " msgid "Usage: gpg-protect-tool [options] (-h for help)\n" msgstr "用法: gpg-protect-tool [選項] (或用 -h 求助)\n" msgid "" "Syntax: gpg-protect-tool [options] [args]\n" "Secret key maintenance tool\n" msgstr "" "語法: gpg-protect-tool [選項] [引數]\n" "私鑰維護工具\n" msgid "Please enter the passphrase to unprotect the PKCS#12 object." msgstr "請輸入密語來取消 PKCS#12 物件的保護." msgid "Please enter the passphrase to protect the new PKCS#12 object." msgstr "請輸入密語來保護新的 PKCS#12 物件." msgid "" "Please enter the passphrase to protect the imported object within the GnuPG " "system." msgstr "請輸入密語以保護匯入至 GnuPG 系統內的物件." msgid "" "Please enter the passphrase or the PIN\n" "needed to complete this operation." msgstr "" "請輸入完成這項操作所需的\n" "密語或個人識別碼 (PIN)." msgid "Passphrase:" msgstr "密語:" msgid "cancelled\n" msgstr "已取消\n" #, c-format msgid "error while asking for the passphrase: %s\n" msgstr "詢問密語時出錯: %s\n" #, c-format msgid "error opening `%s': %s\n" msgstr "開啟 `%s' 時出錯: %s\n" #, c-format msgid "file `%s', line %d: %s\n" msgstr "檔案 `%s', 第 %d 列: %s\n" #, c-format msgid "statement \"%s\" ignored in `%s', line %d\n" msgstr "命令 \"%s\" 忽略於 `%s', 第 %d 列\n" #, c-format msgid "system trustlist `%s' not available\n" msgstr "沒有系統信任清單 `%s' 可用\n" #, c-format msgid "bad fingerprint in `%s', line %d\n" msgstr "不良的指紋於 `%s', 第 %d 列\n" #, c-format msgid "invalid keyflag in `%s', line %d\n" msgstr "無效的金鑰旗標於 `%s', 第 %d 列\n" #, c-format msgid "error reading `%s', line %d: %s\n" msgstr "讀取 `%s' 時出錯, 第 %d 列: %s\n" msgid "error reading list of trusted root certificates\n" msgstr "讀取已信任根憑證清單時出錯\n" #. TRANSLATORS: This prompt is shown by the Pinentry #. and has one special property: A "%%0A" is used by #. Pinentry to insert a line break. The double #. percent sign is actually needed because it is also #. a printf format string. If you need to insert a #. plain % sign, you need to encode it as "%%25". The #. "%s" gets replaced by the name as stored in the #. certificate. #, c-format msgid "" "Do you ultimately trust%%0A \"%s\"%%0Ato correctly certify user " "certificates?" msgstr "請問你是否徹底信任%%0A \"%s\"%%0A正確驗證使用者憑證的能力?" msgid "Yes" msgstr "Yes" msgid "No" msgstr "No" #. TRANSLATORS: This prompt is shown by the Pinentry and has #. one special property: A "%%0A" is used by Pinentry to #. insert a line break. The double percent sign is actually #. needed because it is also a printf format string. If you #. need to insert a plain % sign, you need to encode it as #. "%%25". The second "%s" gets replaced by a hexdecimal #. fingerprint string whereas the first one receives the name #. as stored in the certificate. #, c-format msgid "" "Please verify that the certificate identified as:%%0A \"%s\"%%0Ahas the " "fingerprint:%%0A %s" msgstr "請驗證憑證與此完全相同:%%0A \"%s\"%%0A其指紋為:%%0A %s" #. TRANSLATORS: "Correct" is the label of a button and intended #. to be hit if the fingerprint matches the one of the CA. The #. other button is "the default "Cancel" of the Pinentry. msgid "Correct" msgstr "正確" msgid "Wrong" msgstr "錯了" #, c-format msgid "Note: This passphrase has never been changed.%0APlease change it now." msgstr "請注意: 密語從未變更過.%0A請現在就變更." #, c-format msgid "" "This passphrase has not been changed%%0Asince %.4s-%.2s-%.2s. Please change " "it now." msgstr "密語從下列時刻起就沒有變更過:%%0A%.4s-%.2s-%.2s. 請現在就變更." msgid "Change passphrase" msgstr "更改密語" msgid "I'll change it later" msgstr "我稍後再變更" #, c-format msgid "error creating a pipe: %s\n" msgstr "建立管道時出錯: %s\n" #, c-format msgid "can't fdopen pipe for reading: %s\n" msgstr "無法將管道打開流以讀取: %s\n" #, c-format msgid "error forking process: %s\n" msgstr "衍生執行程序時出錯: %s\n" #, c-format msgid "waiting for process %d to terminate failed: %s\n" msgstr "等候 %d 處理程序終止時失敗: %s\n" #, c-format msgid "error getting exit code of process %d: %s\n" msgstr "取得 %d 執行程序結束碼時出錯: %s\n" #, c-format msgid "error running `%s': exit status %d\n" msgstr "執行 `%s' 時出錯: 結束狀態 %d\n" #, c-format msgid "error running `%s': probably not installed\n" msgstr "執行 `%s' 時出錯: 可能尚未安裝\n" #, c-format msgid "error running `%s': terminated\n" msgstr "執行 `%s' 時出錯: 已終止\n" #, c-format msgid "error creating socket: %s\n" msgstr "建立 socket 時出錯: %s\n" msgid "host not found" msgstr "找不到主機" msgid "gpg-agent is not available in this session\n" msgstr "gpg-agent 在此階段無法使用\n" #, c-format msgid "can't connect to `%s': %s\n" msgstr "無法連接至 `%s': %s\n" msgid "communication problem with gpg-agent\n" msgstr "與 gpg-agent 的溝通問題\n" msgid "problem setting the gpg-agent options\n" msgstr "設定 gpg-agent 選項時發生問題\n" msgid "canceled by user\n" msgstr "由使用者取消\n" msgid "problem with the agent\n" msgstr "代理程式的問題\n" #, c-format msgid "can't disable core dumps: %s\n" msgstr "無法讓系統停止傾印核心檔: %s\n" #, c-format msgid "Warning: unsafe ownership on %s \"%s\"\n" msgstr "警告: %s 的所有權 \"%s\" 並不安全\n" #, c-format msgid "Warning: unsafe permissions on %s \"%s\"\n" msgstr "警告: %s 的權限 \"%s\" 並不安全\n" #. TRANSLATORS: See doc/TRANSLATE about this string. msgid "yes" msgstr "yes" msgid "yY" msgstr "yY" #. TRANSLATORS: See doc/TRANSLATE about this string. msgid "no" msgstr "no" msgid "nN" msgstr "nN" #. TRANSLATORS: See doc/TRANSLATE about this string. msgid "quit" msgstr "quit" msgid "qQ" msgstr "qQ" #. TRANSLATORS: See doc/TRANSLATE about this string. msgid "okay|okay" msgstr "okay|okay" #. TRANSLATORS: See doc/TRANSLATE about this string. msgid "cancel|cancel" msgstr "cancel|cancel" msgid "oO" msgstr "oO" msgid "cC" msgstr "cC" #, c-format msgid "out of core in secure memory while allocating %lu bytes" msgstr "在安全記憶體配置 %lu 位元組時超出核心" #, c-format msgid "out of core while allocating %lu bytes" msgstr "配置 %lu 位元組時超出核心" msgid "no running gpg-agent - starting one\n" msgstr "沒有執行中的 gpg-agent - 正在啟動一份\n" #, c-format msgid "waiting %d seconds for the agent to come up\n" msgstr "必須等候 %d 秒讓代理程式出現\n" msgid "can't connect to the agent - trying fall back\n" msgstr "無法連線至代理程式 - 正試著退回\n" #. TRANSLATORS: Copy the prefix between the vertical bars #. verbatim. It will not be printed. msgid "|audit-log-result|Good" msgstr "|audit-log-result|良好" msgid "|audit-log-result|Bad" msgstr "|audit-log-result|不良" msgid "|audit-log-result|Not supported" msgstr "|audit-log-result|不支援" msgid "|audit-log-result|No certificate" msgstr "|audit-log-result|沒有憑證" msgid "|audit-log-result|Not enabled" msgstr "|audit-log-result|未啟用" msgid "|audit-log-result|Error" msgstr "|audit-log-result|錯誤" msgid "|audit-log-result|Not used" msgstr "|audit-log-result|未使用" msgid "|audit-log-result|Okay" msgstr "|audit-log-result|沒問題" msgid "|audit-log-result|Skipped" msgstr "|audit-log-result|已跳過" msgid "|audit-log-result|Some" msgstr "|audit-log-result|有些" msgid "Certificate chain available" msgstr "有可用的憑證鏈" msgid "root certificate missing" msgstr "根憑證遺失" msgid "Data encryption succeeded" msgstr "資料已加密成功" msgid "Data available" msgstr "有可用的資料" msgid "Session key created" msgstr "階段金鑰已建立" #, c-format msgid "algorithm: %s" msgstr "演算法: %s" #, c-format msgid "unsupported algorithm: %s" msgstr "未支援的演算法: %s" msgid "seems to be not encrypted" msgstr "看起來未加密" msgid "Number of recipients" msgstr "收件者數量" #, c-format msgid "Recipient %d" msgstr "收件者 %d" msgid "Data signing succeeded" msgstr "資料已簽署成功" #, c-format msgid "data hash algorithm: %s" msgstr "資料雜湊演算法: %s" #, c-format msgid "Signer %d" msgstr "簽署者 %d" #, c-format msgid "attr hash algorithm: %s" msgstr "屬性雜湊演算法: %s" msgid "Data decryption succeeded" msgstr "資料已解密成功" msgid "Encryption algorithm supported" msgstr "支援的加密演算法" msgid "Data verification succeeded" msgstr "資料驗證成功" msgid "Signature available" msgstr "有可用的簽章" msgid "Parsing data succeeded" msgstr "剖析資料成功" #, c-format msgid "bad data hash algorithm: %s" msgstr "不良的資料雜湊演算法: %s" #, c-format msgid "Signature %d" msgstr "簽章 %d" msgid "Certificate chain valid" msgstr "憑證鏈有效" msgid "Root certificate trustworthy" msgstr "根憑證可信賴" msgid "no CRL found for certificate" msgstr "找不到用於憑證的 CRL" msgid "the available CRL is too old" msgstr "可用的 CRL 太舊了" msgid "CRL/OCSP check of certificates" msgstr "CRL/OCSP 憑證檢查" msgid "Included certificates" msgstr "包含在內的憑證" msgid "No audit log entries." msgstr "沒有稽核日誌項目." msgid "Unknown operation" msgstr "未知的操作" msgid "Gpg-Agent usable" msgstr "Gpg-Agent 可以使用" msgid "Dirmngr usable" msgstr "Dirmngr 可以使用" #, c-format msgid "No help available for `%s'." msgstr "`%s' 沒有可用的說明." msgid "ignoring garbage line" msgstr "忽略垃圾列" msgid "[none]" msgstr "[ 無 ]" #, c-format msgid "armor: %s\n" msgstr "封裝: %s\n" msgid "invalid armor header: " msgstr "無效的封裝檔頭: " msgid "armor header: " msgstr "封裝檔頭: " msgid "invalid clearsig header\n" msgstr "無效的明文簽章檔頭\n" msgid "unknown armor header: " msgstr "未知的封裝檔頭: " msgid "nested clear text signatures\n" msgstr "多層明文簽章\n" msgid "unexpected armor: " msgstr "未預期的封裝: " msgid "invalid dash escaped line: " msgstr "無效的破折號逸出列: " #, c-format msgid "invalid radix64 character %02X skipped\n" msgstr "無效的 64 進位字符 %02x 已跳過\n" msgid "premature eof (no CRC)\n" msgstr "檔案未預期的結束 (沒有 CRC 的部分)\n" msgid "premature eof (in CRC)\n" msgstr "檔案未預期的結束 (CRC 的部分未結束)\n" msgid "malformed CRC\n" msgstr "格式不對的 CRC\n" #, c-format msgid "CRC error; %06lX - %06lX\n" msgstr "CRC 錯誤; %06lX - %06lX\n" msgid "premature eof (in trailer)\n" msgstr "檔案未預期的結束 (於結尾處)\n" msgid "error in trailer line\n" msgstr "結尾列有問題\n" msgid "no valid OpenPGP data found.\n" msgstr "找不到有效的 OpenPGP 資料.\n" #, c-format msgid "invalid armor: line longer than %d characters\n" msgstr "無效的封裝: 列長超出 %d 字符\n" msgid "" "quoted printable character in armor - probably a buggy MTA has been used\n" msgstr "封裝裡出現被引號括住的可列印字符 - 可能是有瑕疵的送信程式造成的\n" msgid "" "a notation name must have only printable characters or spaces, and end with " "an '='\n" msgstr "標記名稱一定要採用可印出的字符或空白, 並以一個 '=' 來結尾\n" msgid "a user notation name must contain the '@' character\n" msgstr "使用者標記名稱一定要含有 '@' 字符\n" msgid "a notation name must not contain more than one '@' character\n" msgstr "使用者標記名稱不得含有兩個或更多的 '@' 字符\n" msgid "a notation value must not use any control characters\n" msgstr "標記值一定不能使用任何的控制字符\n" msgid "WARNING: invalid notation data found\n" msgstr "警告: 找到無效的標記資料\n" msgid "not human readable" msgstr "不是人類能讀得懂的" #, c-format msgid "OpenPGP card not available: %s\n" msgstr "沒有可用的 OpenPGP 卡片: %s\n" #, c-format msgid "OpenPGP card no. %s detected\n" msgstr "偵測到 OpenPGP 卡片編號 %s\n" msgid "can't do this in batch mode\n" msgstr "無法在批次模式中這樣做\n" msgid "This command is only available for version 2 cards\n" msgstr "祇有第二版卡片纔能用這個指令\n" msgid "Reset Code not or not anymore available\n" msgstr "(再也) 沒有重設碼\n" msgid "Your selection? " msgstr "你要選哪一個? " msgid "[not set]" msgstr "[未設定]" msgid "male" msgstr "男性" msgid "female" msgstr "女性" msgid "unspecified" msgstr "未特定" msgid "not forced" msgstr "不強迫使用" msgid "forced" msgstr "強迫使用" msgid "Error: Only plain ASCII is currently allowed.\n" msgstr "錯誤: 目前祇允許使用單純的 ASCII 字符.\n" msgid "Error: The \"<\" character may not be used.\n" msgstr "錯誤: 不能使用 \"<\" 字符.\n" msgid "Error: Double spaces are not allowed.\n" msgstr "錯誤: 並不允許使用連續兩個以上的空格.\n" msgid "Cardholder's surname: " msgstr "卡片持有者的姓氏: " msgid "Cardholder's given name: " msgstr "卡片持有者的名字: " #, c-format msgid "Error: Combined name too long (limit is %d characters).\n" msgstr "錯誤: 合併後的名字太長 (上限是 %d 個字符).\n" msgid "URL to retrieve public key: " msgstr "取回公鑰的 URL: " #, c-format msgid "Error: URL too long (limit is %d characters).\n" msgstr "錯誤: URL 太長 (上限是 %d 個字符).\n" #, c-format msgid "error allocating enough memory: %s\n" msgstr "配置足夠的記憶體時出錯: %s\n" #, c-format msgid "error reading `%s': %s\n" msgstr "讀取 `%s' 時出錯: %s\n" #, c-format msgid "error writing `%s': %s\n" msgstr "寫入 `%s' 時出錯: %s\n" msgid "Login data (account name): " msgstr "登入資料 (帳號名稱): " #, c-format msgid "Error: Login data too long (limit is %d characters).\n" msgstr "錯誤: 登入資料太長 (上限是 %d 個字符).\n" msgid "Private DO data: " msgstr "私人的 DO 資料: " #, c-format msgid "Error: Private DO too long (limit is %d characters).\n" msgstr "錯誤: 私人的 DO 太長 (上限是 %d 個字符).\n" msgid "Language preferences: " msgstr "介面語言偏好設定: " msgid "Error: invalid length of preference string.\n" msgstr "錯誤: 無效的偏好設定字串長度\n" msgid "Error: invalid characters in preference string.\n" msgstr "錯誤: 偏好設定字串中含有無效的字符\n" msgid "Sex ((M)ale, (F)emale or space): " msgstr "性別 ((M)男性, (F)女性或留空): " msgid "Error: invalid response.\n" msgstr "錯誤: 無效的回應.\n" msgid "CA fingerprint: " msgstr "憑證中心 (CA) 指紋: " msgid "Error: invalid formatted fingerprint.\n" msgstr "錯誤: 無效的格式化指紋.\n" #, c-format msgid "key operation not possible: %s\n" msgstr "不可能進行金鑰操作: %s\n" msgid "not an OpenPGP card" msgstr "這不是 OpenPGP 卡片" #, c-format msgid "error getting current key info: %s\n" msgstr "取得現用金鑰資訊時出錯: %s\n" msgid "Replace existing key? (y/N) " msgstr "是否要取代既有的金鑰? (y/N) " msgid "" "NOTE: There is no guarantee that the card supports the requested size.\n" " If the key generation does not succeed, please check the\n" " documentation of your card to see what sizes are allowed.\n" msgstr "" "請注意: 我們完全無法保證卡片支援你想用的尺寸.\n" " 如果金鑰產生失敗了, 煩請查閱你卡片上的文件,\n" " 看看這張卡片支援哪些尺寸.\n" #, c-format msgid "What keysize do you want for the Signature key? (%u) " msgstr "你的簽署金鑰想要用多大的金鑰尺寸? (%u) " #, c-format msgid "What keysize do you want for the Encryption key? (%u) " msgstr "你的加密金鑰想要用多大的金鑰尺寸? (%u) " #, c-format msgid "What keysize do you want for the Authentication key? (%u) " msgstr "你的認證金鑰想要用多大的金鑰尺寸? (%u) " #, c-format msgid "rounded up to %u bits\n" msgstr "加大到 %u 位元\n" #, c-format msgid "%s keysizes must be in the range %u-%u\n" msgstr "%s 金鑰尺寸一定要介於 %u 到 %u 之間\n" #, c-format msgid "The card will now be re-configured to generate a key of %u bits\n" msgstr "這張卡片將重新加以組態, 以便產生 %u 位元的金鑰\n" #, c-format msgid "error changing size of key %d to %u bits: %s\n" msgstr "將金鑰 %d 尺寸變更至 %u 位元時出錯: %s\n" msgid "Make off-card backup of encryption key? (Y/n) " msgstr "是否要為加密用金鑰建立卡外備份? (Y/n) " msgid "NOTE: keys are already stored on the card!\n" msgstr "請注意: 金鑰已經存放在卡片上了!\n" msgid "Replace existing keys? (y/N) " msgstr "是否要取代既有的金鑰? (y/N) " #, c-format msgid "" "Please note that the factory settings of the PINs are\n" " PIN = `%s' Admin PIN = `%s'\n" "You should change them using the command --change-pin\n" msgstr "" "請注意個人識別碼 (PIN) 的出廠設定值為\n" " PIN = `%s' 管理者 PIN = `%s'\n" "你應該用 --change-pin 指令來加以變更\n" msgid "Please select the type of key to generate:\n" msgstr "請選擇你要產生的金鑰種類:\n" msgid " (1) Signature key\n" msgstr " (1) 簽署用金鑰\n" msgid " (2) Encryption key\n" msgstr " (2) 加密用金鑰\n" msgid " (3) Authentication key\n" msgstr " (3) 憑證用金鑰\n" msgid "Invalid selection.\n" msgstr "無效的選擇.\n" msgid "Please select where to store the key:\n" msgstr "請選擇要把金鑰存放在哪裡:\n" msgid "unknown key protection algorithm\n" msgstr "未知的金鑰保護演算法\n" msgid "secret parts of key are not available\n" msgstr "私鑰部分無法取用\n" msgid "secret key already stored on a card\n" msgstr "私鑰已經存放在卡片上了\n" #, c-format msgid "error writing key to card: %s\n" msgstr "金鑰寫入卡片時出錯: %s\n" msgid "quit this menu" msgstr "離開這個選單" msgid "show admin commands" msgstr "顯示管理者指令" msgid "show this help" msgstr "顯示這份線上說明" msgid "list all available data" msgstr "列出所有可用的資料" msgid "change card holder's name" msgstr "變更卡片持有人的名字" msgid "change URL to retrieve key" msgstr "變更取回金鑰的 URL" msgid "fetch the key specified in the card URL" msgstr "從卡片 URL 取回指定的金鑰" msgid "change the login name" msgstr "變更登入名稱" msgid "change the language preferences" msgstr "變更介面語言偏好設定" msgid "change card holder's sex" msgstr "變更卡片持有者的性別" msgid "change a CA fingerprint" msgstr "變更某個憑證中心 (CA) 的指紋" msgid "toggle the signature force PIN flag" msgstr "切換簽章是否強制使用個人識別碼 (PIN) 的旗標" msgid "generate new keys" msgstr "產生新的金鑰" msgid "menu to change or unblock the PIN" msgstr "變更或重設個人識別碼 (PIN) 的選單" msgid "verify the PIN and list all data" msgstr "驗證個人識別碼 (PIN) 並列出所有的資料" msgid "unblock the PIN using a Reset Code" msgstr "用重設碼來解凍個人識別碼 (PIN)" msgid "gpg/card> " msgstr "gpg/卡片> " msgid "Admin-only command\n" msgstr "限管理者使用的指令\n" msgid "Admin commands are allowed\n" msgstr "允許使用管理者指令\n" msgid "Admin commands are not allowed\n" msgstr "未允許使用管理者指令\n" msgid "Invalid command (try \"help\")\n" msgstr "無效的指令 (試試看 \"help\")\n" msgid "--output doesn't work for this command\n" msgstr "--output 在這個指令中沒有作用\n" #, c-format msgid "can't open `%s'\n" msgstr "無法開啟 `%s'\n" #, c-format msgid "key \"%s\" not found: %s\n" msgstr "找不到金鑰 \"%s\": %s\n" #, c-format msgid "error reading keyblock: %s\n" msgstr "讀取金鑰區塊時出錯: %s\n" msgid "(unless you specify the key by fingerprint)\n" msgstr "(除非你用指紋指定了金鑰)\n" msgid "can't do this in batch mode without \"--yes\"\n" msgstr "沒有 \"--yes\" 就沒辦法在批次模式中這麼做\n" msgid "Delete this key from the keyring? (y/N) " msgstr "要從鑰匙圈裡刪除這把金鑰嗎? (y/N) " msgid "This is a secret key! - really delete? (y/N) " msgstr "這是一把私鑰! - 真的要刪除嗎? (y/N) " #, c-format msgid "deleting keyblock failed: %s\n" msgstr "刪除金鑰區塊時失敗: %s\n" msgid "ownertrust information cleared\n" msgstr "主觀信任資訊已清除\n" #, c-format msgid "there is a secret key for public key \"%s\"!\n" msgstr "公鑰 \"%s\" 有相對應的私鑰!\n" msgid "use option \"--delete-secret-keys\" to delete it first.\n" msgstr "請先以 \"--delete-secret-keys\" 選項來刪除它.\n" #, c-format msgid "error creating passphrase: %s\n" msgstr "建立密語時出錯: %s\n" msgid "can't use a symmetric ESK packet due to the S2K mode\n" msgstr "因處於 S2K 模式下而無法使用對稱式 ESK 封包\n" #, c-format msgid "using cipher %s\n" msgstr "正在使用 %s 編密法\n" #, c-format msgid "`%s' already compressed\n" msgstr "`%s' 已經被壓縮了\n" #, c-format msgid "WARNING: `%s' is an empty file\n" msgstr "警告: `%s' 是個空檔案\n" msgid "you can only encrypt to RSA keys of 2048 bits or less in --pgp2 mode\n" msgstr "在 --pgp2 模式中, 你祇能以 2048 位元以下的 RSA 金鑰加密\n" #, c-format msgid "reading from `%s'\n" msgstr "正在從 `%s' 讀取中\n" msgid "" "unable to use the IDEA cipher for all of the keys you are encrypting to.\n" msgstr "你正要用來加密的所有金鑰都不能使用 IDEA 編密法.\n" #, c-format msgid "" "WARNING: forcing symmetric cipher %s (%d) violates recipient preferences\n" msgstr "警告: 強迫使用 %s (%d) 對稱式編密法會違反收件者偏好設定\n" #, c-format msgid "" "WARNING: forcing compression algorithm %s (%d) violates recipient " "preferences\n" msgstr "警告: 強迫使用 %s (%d) 壓縮演算法會違反收件者偏好設定\n" #, c-format msgid "forcing symmetric cipher %s (%d) violates recipient preferences\n" msgstr "強迫使用 %s (%d) 對稱式編密法會違反收件者偏好設定\n" #, c-format msgid "you may not use %s while in %s mode\n" msgstr "你不能夠將 %s 用於 %s 模式中\n" #, c-format msgid "%s/%s encrypted for: \"%s\"\n" msgstr "%s/%s 已加密給: \"%s\"\n" #, c-format msgid "%s encrypted data\n" msgstr "%s 已加密的資料\n" #, c-format msgid "encrypted with unknown algorithm %d\n" msgstr "以 %d 未知演算法所加密\n" msgid "" "WARNING: message was encrypted with a weak key in the symmetric cipher.\n" msgstr "警告: 訊息已用對稱式編密法的弱金鑰加密了.\n" msgid "problem handling encrypted packet\n" msgstr "處理已加密封包有問題\n" msgid "no remote program execution supported\n" msgstr "沒有支援的遠端程式執行\n" msgid "" "external program calls are disabled due to unsafe options file permissions\n" msgstr "因為不安全的檔案權限選項, 而禁用了外部程式叫用\n" msgid "this platform requires temporary files when calling external programs\n" msgstr "在這個作業平台上叫用外部程式時需要暫存檔\n" #, c-format msgid "unable to execute program `%s': %s\n" msgstr "無法執行程式 `%s': %s\n" #, c-format msgid "unable to execute shell `%s': %s\n" msgstr "無法執行 shell `%s': %s\n" #, c-format msgid "system error while calling external program: %s\n" msgstr "叫用外部程式時發生系統錯誤: %s\n" msgid "unnatural exit of external program\n" msgstr "外部程式不自然地離開\n" msgid "unable to execute external program\n" msgstr "無法執行外部程式\n" #, c-format msgid "unable to read external program response: %s\n" msgstr "無法讀取外部程式回應: %s\n" #, c-format msgid "WARNING: unable to remove tempfile (%s) `%s': %s\n" msgstr "警告: 無法移除暫存檔 (%s) `%s': %s\n" #, c-format msgid "WARNING: unable to remove temp directory `%s': %s\n" msgstr "警告: 無法移除暫存目錄 `%s': %s\n" msgid "export signatures that are marked as local-only" msgstr "匯出標記為僅限本機使用的簽章" msgid "export attribute user IDs (generally photo IDs)" msgstr "匯出署名使用者 ID (通常是照片 ID)" msgid "export revocation keys marked as \"sensitive\"" msgstr "匯出標記為 \"機密\" 的撤銷金鑰" msgid "remove the passphrase from exported subkeys" msgstr "從匯出所得的子鑰中移除密語" msgid "remove unusable parts from key during export" msgstr "匯出時從金鑰中移除無法使用的部分" msgid "remove as much as possible from key during export" msgstr "匯出時盡可能地從金鑰中移除" msgid "export keys in an S-expression based format" msgstr "匯出金鑰成以 S-expression 為基礎的格式" msgid "exporting secret keys not allowed\n" msgstr "不允許匯出私鑰\n" #, c-format msgid "key %s: not protected - skipped\n" msgstr "金鑰 %s: 未受保護 - 已跳過\n" #, c-format msgid "key %s: PGP 2.x style key - skipped\n" msgstr "金鑰 %s: PGP 2.x 型態的金鑰 - 已跳過\n" #, c-format msgid "key %s: key material on-card - skipped\n" msgstr "金鑰 %s: 金鑰資料在卡片上 - 已跳過\n" msgid "about to export an unprotected subkey\n" msgstr "正要匯出未受保護的子鑰\n" #, c-format msgid "failed to unprotect the subkey: %s\n" msgstr "解除子鑰保護失敗: %s\n" # I hope this warning doesn't confuse people. #, c-format msgid "WARNING: secret key %s does not have a simple SK checksum\n" msgstr "警告: 私鑰 %s 並沒有任的何單一 SK 加總檢查\n" msgid "WARNING: nothing exported\n" msgstr "警告: 沒有匯出任何東西\n" msgid "too many entries in pk cache - disabled\n" msgstr "pk 快取裡有太多項目 - 已禁用\n" msgid "[User ID not found]" msgstr "[找不到使用者 ID]" #, c-format msgid "automatically retrieved `%s' via %s\n" msgstr "已自動取回 `%s' (經由 %s )\n" #, c-format msgid "error retrieving `%s' via %s: %s\n" msgstr "取得 `%s' 於 %s 時出錯: %s\n" msgid "No fingerprint" msgstr "沒有指紋" #, c-format msgid "Invalid key %s made valid by --allow-non-selfsigned-uid\n" msgstr "無效的金鑰 %s 可以藉由 --allow-non-selfsigned-uid 而生效\n" #, c-format msgid "no secret subkey for public subkey %s - ignoring\n" msgstr "公鑰 %s 沒有相對應的私鑰 - 正在忽略\n" #, c-format msgid "using subkey %s instead of primary key %s\n" msgstr "使用子鑰 %s 來替換主鑰 %s\n" #, c-format msgid "key %s: secret key without public key - skipped\n" msgstr "金鑰 %s: 祇有私鑰而沒有公鑰 - 已跳過\n" msgid "make a signature" msgstr "建立簽章" msgid "make a clear text signature" msgstr "建立明文簽章" msgid "make a detached signature" msgstr "建立分離式簽章" msgid "encrypt data" msgstr "加密資料" msgid "encryption only with symmetric cipher" msgstr "僅使用對稱式編密法來加密" msgid "decrypt data (default)" msgstr "資料解密 (預設)" msgid "verify a signature" msgstr "驗證簽章" msgid "list keys" msgstr "列出金鑰" msgid "list keys and signatures" msgstr "列出金鑰和簽章" msgid "list and check key signatures" msgstr "列出並檢查金鑰簽章" msgid "list keys and fingerprints" msgstr "列出金鑰和指紋" msgid "list secret keys" msgstr "列出私鑰" msgid "generate a new key pair" msgstr "產生新的金鑰對" msgid "generate a revocation certificate" msgstr "產生撤銷憑證" msgid "remove keys from the public keyring" msgstr "從公鑰鑰匙圈裡移除金鑰" msgid "remove keys from the secret keyring" msgstr "從私鑰鑰匙圈裡移除金鑰" msgid "sign a key" msgstr "簽署金鑰" msgid "sign a key locally" msgstr "僅在本機簽署金鑰" msgid "sign or edit a key" msgstr "簽署或編輯金鑰" msgid "change a passphrase" msgstr "更改密語" msgid "export keys" msgstr "匯出金鑰" msgid "export keys to a key server" msgstr "把金鑰匯出至金鑰伺服器" msgid "import keys from a key server" msgstr "從金鑰伺服器匯入金鑰" msgid "search for keys on a key server" msgstr "在金鑰伺服器上搜尋金鑰" msgid "update all keys from a keyserver" msgstr "從金鑰伺服器更新所有的金鑰" msgid "import/merge keys" msgstr "匯入/合併金鑰" msgid "print the card status" msgstr "列印卡片狀態" msgid "change data on a card" msgstr "變更卡片上的資料" msgid "change a card's PIN" msgstr "變更卡片的個人識別碼 (PIN)" msgid "update the trust database" msgstr "更新信任資料庫" msgid "print message digests" msgstr "印出訊息摘要" msgid "run in server mode" msgstr "以伺服器模式執行" msgid "create ascii armored output" msgstr "建立以 ASCII 封裝過的輸出" msgid "|USER-ID|encrypt for USER-ID" -msgstr "|使用者-ID|以「使用者-ID」作為加密對象" +msgstr "|使用者-ID|以指定使用者 ID 作為加密對象" msgid "|USER-ID|use USER-ID to sign or decrypt" -msgstr "|使用者-ID|拿「使用者-ID」來簽署或解密" +msgstr "|使用者-ID|拿指定使用者 ID 來簽署或解密" msgid "|N|set compress level to N (0 disables)" msgstr "|N|設定壓縮等級為 N (0 表示不壓縮)" msgid "use canonical text mode" msgstr "使用標準的文字模式" msgid "|FILE|write output to FILE" -msgstr "|檔案|將輸出寫入至「檔案」" +msgstr "|檔案|將輸出寫入至指定檔案" msgid "do not make any changes" msgstr "不要做任何改變" msgid "prompt before overwriting" msgstr "覆寫前先詢問" msgid "use strict OpenPGP behavior" msgstr "使用嚴謹的 OpenPGP 行為" msgid "" "@\n" "(See the man page for a complete listing of all commands and options)\n" msgstr "" "@\n" "(請參照線上說明頁面來取得所有命令和選項的完整清單)\n" msgid "" "@\n" "Examples:\n" "\n" " -se -r Bob [file] sign and encrypt for user Bob\n" " --clearsign [file] make a clear text signature\n" " --detach-sign [file] make a detached signature\n" " --list-keys [names] show keys\n" " --fingerprint [names] show fingerprints\n" msgstr "" "@\n" "範例:\n" "\n" " -se -r Bob [檔案] 對 Bob 這個使用者簽署及加密\n" " --clearsign [檔案] 做出明文簽章\n" " --detach-sign [檔案] 做出分離式簽章\n" " --list-keys [名字] 顯示金鑰\n" " --fingerprint [名字] 顯示指紋\n" msgid "Usage: gpg [options] [files] (-h for help)" msgstr "用法: gpg [選項] [檔案] (或用 -h 求助)" msgid "" "Syntax: gpg [options] [files]\n" "Sign, check, encrypt or decrypt\n" "Default operation depends on the input data\n" msgstr "" "語法: gpg [選項] [檔案]\n" "簽署, 檢查, 加密或解密\n" "預設的操作會依輸入資料而定\n" msgid "" "\n" "Supported algorithms:\n" msgstr "" "\n" "已支援的演算法:\n" msgid "Pubkey: " msgstr "公鑰: " msgid "Cipher: " msgstr "編密法: " msgid "Hash: " msgstr "雜湊: " msgid "Compression: " msgstr "壓縮: " msgid "usage: gpg [options] " msgstr "用法: gpg [選項] " msgid "conflicting commands\n" msgstr "指令彼此矛盾\n" #, c-format msgid "no = sign found in group definition `%s'\n" msgstr "在群組定義 `%s' 裡找不到 = 記號\n" #, c-format msgid "WARNING: unsafe ownership on homedir `%s'\n" msgstr "警告: 家目錄 `%s' 的所有權並不安全\n" #, c-format msgid "WARNING: unsafe ownership on configuration file `%s'\n" msgstr "警告: 組態檔案 `%s' 的所有權並不安全\n" #, c-format msgid "WARNING: unsafe ownership on extension `%s'\n" msgstr "警告: 延伸模組 `%s' 的所有權並不安全\n" #, c-format msgid "WARNING: unsafe permissions on homedir `%s'\n" msgstr "警告: 家目錄 `%s' 的權限並不安全\n" #, c-format msgid "WARNING: unsafe permissions on configuration file `%s'\n" msgstr "警告: 組態檔案 `%s' 的權限並不安全\n" #, c-format msgid "WARNING: unsafe permissions on extension `%s'\n" msgstr "警告: 延伸模組 `%s' 的權限並不安全\n" #, c-format msgid "WARNING: unsafe enclosing directory ownership on homedir `%s'\n" msgstr "警告: 家目錄 `%s' 的封入目錄所有權並不安全\n" #, c-format msgid "" "WARNING: unsafe enclosing directory ownership on configuration file `%s'\n" msgstr "警告: 組態檔案 `%s' 的封入目錄所有權並不安全\n" #, c-format msgid "WARNING: unsafe enclosing directory ownership on extension `%s'\n" msgstr "警告: 延伸模組 `%s' 的封入目錄所有權並不安全\n" #, c-format msgid "WARNING: unsafe enclosing directory permissions on homedir `%s'\n" msgstr "警告: 家目錄 `%s' 的封入目錄權限並不安全\n" #, c-format msgid "" "WARNING: unsafe enclosing directory permissions on configuration file `%s'\n" msgstr "警告: 組態檔案 `%s' 的封入目錄權限並不安全\n" #, c-format msgid "WARNING: unsafe enclosing directory permissions on extension `%s'\n" msgstr "警告: 延伸模組 `%s' 的封入目錄權限並不安全\n" #, c-format msgid "unknown configuration item `%s'\n" msgstr "未知的組態項目 `%s'\n" msgid "display photo IDs during key listings" msgstr "列出金鑰時顯示照片 ID" msgid "show policy URLs during signature listings" msgstr "列出簽章時顯示原則 URL" msgid "show all notations during signature listings" msgstr "列出簽章時顯示所有的註記" msgid "show IETF standard notations during signature listings" msgstr "列出簽章時顯示 IETF 標準註記" msgid "show user-supplied notations during signature listings" msgstr "列出簽章時顯示使用者提供的註記" msgid "show preferred keyserver URLs during signature listings" msgstr "列出簽章時顯示偏好的金鑰伺服器 URL" msgid "show user ID validity during key listings" msgstr "列出金鑰時顯示使用者 ID 有效性" msgid "show revoked and expired user IDs in key listings" msgstr "列出金鑰時顯示已撤銷或過期的使用者 ID" msgid "show revoked and expired subkeys in key listings" msgstr "列出金鑰時顯示已撤銷或過期的子鑰" msgid "show the keyring name in key listings" msgstr "在金鑰清單中顯示鑰匙圈名稱" msgid "show expiration dates during signature listings" msgstr "列出簽章時顯示有效期限" #, c-format msgid "NOTE: old default options file `%s' ignored\n" msgstr "請注意: 已忽略舊有的預設選項檔 `%s'\n" #, c-format msgid "libgcrypt is too old (need %s, have %s)\n" msgstr "libgcrypt 太舊了 (需要 %s, 但是祇有 %s)\n" #, c-format msgid "NOTE: %s is not for normal use!\n" msgstr "請注意: 一般情況下不會用到 %s!\n" #, c-format msgid "`%s' is not a valid signature expiration\n" msgstr "`%s' 不是個有效的簽章使用期限\n" #, c-format msgid "`%s' is not a valid character set\n" msgstr "`%s' 不是個有效的字元集\n" msgid "could not parse keyserver URL\n" msgstr "無法剖析金鑰伺服器 URL\n" #, c-format msgid "%s:%d: invalid keyserver options\n" msgstr "%s:%d: 無效的金鑰伺服器選項\n" msgid "invalid keyserver options\n" msgstr "無效的金鑰伺服器選項\n" #, c-format msgid "%s:%d: invalid import options\n" msgstr "%s:%d: 無效的匯入選項\n" msgid "invalid import options\n" msgstr "無效的匯入選項\n" #, c-format msgid "%s:%d: invalid export options\n" msgstr "%s:%d: 無效的匯出選項\n" msgid "invalid export options\n" msgstr "無效的匯出選項\n" #, c-format msgid "%s:%d: invalid list options\n" msgstr "%s:%d: 無效的清單選項\n" msgid "invalid list options\n" msgstr "無效的清單選項\n" msgid "display photo IDs during signature verification" msgstr "驗證簽章時顯示照片 ID" msgid "show policy URLs during signature verification" msgstr "驗證簽章時顯示原則 URL" msgid "show all notations during signature verification" msgstr "驗證簽章時顯示所有的註記" msgid "show IETF standard notations during signature verification" msgstr "驗證簽章時顯示 IETF 標準註記" msgid "show user-supplied notations during signature verification" msgstr "驗證簽章時顯示使用者提供的註記" msgid "show preferred keyserver URLs during signature verification" msgstr "驗證簽章時顯示偏好的金鑰伺服器 URL" msgid "show user ID validity during signature verification" msgstr "驗證簽章時顯示使用者 ID 有效性" msgid "show revoked and expired user IDs in signature verification" msgstr "驗證簽章時顯示已撤銷或過期的使用者 ID" msgid "show only the primary user ID in signature verification" msgstr "驗證簽章時祇顯示主要的使用者 ID" msgid "validate signatures with PKA data" msgstr "以 PKA 資料驗證簽章" msgid "elevate the trust of signatures with valid PKA data" msgstr "提高對持有有效 PKA 資料之簽章的信任" #, c-format msgid "%s:%d: invalid verify options\n" msgstr "%s:%d: 無效的驗證選項\n" msgid "invalid verify options\n" msgstr "無效的驗證選項\n" #, c-format msgid "unable to set exec-path to %s\n" msgstr "無法把執行檔路徑設成 %s\n" #, c-format msgid "%s:%d: invalid auto-key-locate list\n" msgstr "%s:%d: 無效的自動金鑰定址清單\n" msgid "invalid auto-key-locate list\n" msgstr "無效的自動金鑰定址清單\n" msgid "WARNING: program may create a core file!\n" msgstr "警告: 程式可能會傾印出核心檔!\n" #, c-format msgid "WARNING: %s overrides %s\n" msgstr "警告: %s 會推翻 %s\n" #, c-format msgid "%s not allowed with %s!\n" msgstr "%s 不允許跟 %s 併用!\n" #, c-format msgid "%s makes no sense with %s!\n" msgstr "%s 跟 %s 放在一起沒有意義!\n" #, c-format msgid "will not run with insecure memory due to %s\n" msgstr "因為 %s 而不會在不安全的記憶體中執行\n" msgid "you can only make detached or clear signatures while in --pgp2 mode\n" msgstr "你祇有在 --pgp2 模式下纔能做出分離式或明文簽章\n" msgid "you can't sign and encrypt at the same time while in --pgp2 mode\n" msgstr "你在 --pgp2 模式下時, 不能同時簽署和加密\n" msgid "you must use files (and not a pipe) when working with --pgp2 enabled.\n" msgstr "啟用 --pgp2 時你祇應該使用檔案, 而非管道\n" msgid "encrypting a message in --pgp2 mode requires the IDEA cipher\n" msgstr "在 --pgp2 模式下加密訊息需要 IDEA 編密法\n" msgid "selected cipher algorithm is invalid\n" msgstr "所選的編密演算法無效\n" msgid "selected digest algorithm is invalid\n" msgstr "所選的摘要演算法無效\n" msgid "selected compression algorithm is invalid\n" msgstr "所選的壓縮演算法無效\n" msgid "selected certification digest algorithm is invalid\n" msgstr "所選的憑證摘要演算法無效\n" msgid "completes-needed must be greater than 0\n" msgstr "completes-needed 一定要大於 0\n" msgid "marginals-needed must be greater than 1\n" msgstr "marginals-needed 一定要大於 1\n" msgid "max-cert-depth must be in the range from 1 to 255\n" msgstr "max-cert-depth 一定要介於 1 和 255 之間\n" msgid "invalid default-cert-level; must be 0, 1, 2, or 3\n" msgstr "無效的 default-cert-level; 一定要是 0, 1, 2 或 3\n" msgid "invalid min-cert-level; must be 1, 2, or 3\n" msgstr "無效的 min-cert-level; 一定要是 1, 2 或 3\n" msgid "NOTE: simple S2K mode (0) is strongly discouraged\n" msgstr "請注意: 強烈不建議使用單純的 S2K 模式 (0)\n" msgid "invalid S2K mode; must be 0, 1 or 3\n" msgstr "無效的 S2K 模式; 一定要是 0, 1 或 3\n" msgid "invalid default preferences\n" msgstr "無效的預設偏好\n" msgid "invalid personal cipher preferences\n" msgstr "無效的個人編密法偏好\n" msgid "invalid personal digest preferences\n" msgstr "無效的個人摘要偏好\n" msgid "invalid personal compress preferences\n" msgstr "無效的個人壓縮偏好\n" #, c-format msgid "%s does not yet work with %s\n" msgstr "%s 還沒辦法跟 %s 一起運作\n" #, c-format msgid "you may not use cipher algorithm `%s' while in %s mode\n" msgstr "你不該將 `%s' 編密演算法用於 %s 模式中\n" #, c-format msgid "you may not use digest algorithm `%s' while in %s mode\n" msgstr "你不該將 `%s' 摘要演算法用於 %s 模式中\n" #, c-format msgid "you may not use compression algorithm `%s' while in %s mode\n" msgstr "你不該將 `%s' 壓縮演算法用於 %s 模式中\n" #, c-format msgid "failed to initialize the TrustDB: %s\n" msgstr "信任資料庫啟始失敗: %s\n" msgid "WARNING: recipients (-r) given without using public key encryption\n" msgstr "警告: 給定的收件者 (-r) 未使用公鑰加密\n" msgid "--store [filename]" msgstr "--store [檔名]" msgid "--symmetric [filename]" msgstr "--symmetric [檔名]" #, c-format msgid "symmetric encryption of `%s' failed: %s\n" msgstr "`%s' 對稱式加密失敗: %s\n" msgid "--encrypt [filename]" msgstr "--encrypt [檔名]" msgid "--symmetric --encrypt [filename]" msgstr "--symmetric --encrypt [檔名]" msgid "you cannot use --symmetric --encrypt with --s2k-mode 0\n" msgstr "你不能在 --s2k-mode 0 中使用 --symmetric --encrypt\n" #, c-format msgid "you cannot use --symmetric --encrypt while in %s mode\n" msgstr "你不能在 %s 模式中使用 --symmetric --encrypt\n" msgid "--sign [filename]" msgstr "--sign [檔名]" msgid "--sign --encrypt [filename]" msgstr "--sign --encrypt [檔名]" msgid "--symmetric --sign --encrypt [filename]" msgstr "--symmetric --sign --encrypt [檔名]" msgid "you cannot use --symmetric --sign --encrypt with --s2k-mode 0\n" msgstr "你不能在 --s2k-mode 0 中使用 --symmetric --sign --encrypt\n" #, c-format msgid "you cannot use --symmetric --sign --encrypt while in %s mode\n" msgstr "你不能在 %s 模式中使用 --symmetric --sign --encrypt\n" msgid "--sign --symmetric [filename]" msgstr "--sign --symmetric [檔名]" msgid "--clearsign [filename]" msgstr "--clearsign [檔名]" msgid "--decrypt [filename]" msgstr "--decrypt [檔名]" msgid "--sign-key user-id" msgstr "--sign-key 使用者ID" msgid "--lsign-key user-id" msgstr "--lsign-key 使用者ID" msgid "--edit-key user-id [commands]" msgstr "--edit-key 使用者ID [指令]" msgid "--passwd " msgstr "--passwd 使用者ID" #, c-format msgid "keyserver send failed: %s\n" msgstr "送至金鑰伺服器失敗: %s\n" #, c-format msgid "keyserver receive failed: %s\n" msgstr "從金鑰伺服器接收失敗: %s\n" #, c-format msgid "key export failed: %s\n" msgstr "金鑰匯出失敗: %s\n" #, c-format msgid "keyserver search failed: %s\n" msgstr "用金鑰伺服器搜尋失敗: %s\n" #, c-format msgid "keyserver refresh failed: %s\n" msgstr "從金鑰伺服器更新失敗: %s\n" #, c-format msgid "dearmoring failed: %s\n" msgstr "解開封裝失敗: %s\n" #, c-format msgid "enarmoring failed: %s\n" msgstr "進行封裝失敗: %s\n" #, c-format msgid "invalid hash algorithm `%s'\n" msgstr "無效的 `%s' 雜湊演算法\n" msgid "[filename]" msgstr "[檔名]" msgid "Go ahead and type your message ...\n" msgstr "請開始輸入你的訊息 ...\n" msgid "the given certification policy URL is invalid\n" msgstr "給定的的憑證原則 URL 無效\n" msgid "the given signature policy URL is invalid\n" msgstr "給定的簽章原則 URL 無效\n" msgid "the given preferred keyserver URL is invalid\n" msgstr "給定的偏好金鑰伺服器 URL 無效\n" msgid "|FILE|take the keys from the keyring FILE" -msgstr "|檔案|從鑰匙圈「檔案」裡取用金鑰" +msgstr "|檔案|從指定鑰匙圈檔案裡取用金鑰" msgid "make timestamp conflicts only a warning" msgstr "僅把時間戳印矛盾視為警告" msgid "|FD|write status info to this FD" -msgstr "|檔案描述|把狀態資訊寫入此「檔案描述」" +msgstr "|檔案描述|把狀態資訊寫入此指定檔案描述" msgid "Usage: gpgv [options] [files] (-h for help)" msgstr "用法: gpgv [選項] [檔案] (或用 -h 求助)" msgid "" "Syntax: gpgv [options] [files]\n" "Check signatures against known trusted keys\n" msgstr "" "語法: gpgv [選項] [檔案]\n" "用已知的受信任金鑰來檢查簽章\n" msgid "No help available" msgstr "沒有可用的說明" #, c-format msgid "No help available for `%s'" msgstr "`%s' 沒有可用的說明" msgid "import signatures that are marked as local-only" msgstr "匯入標記為僅限本機使用的簽章" msgid "repair damage from the pks keyserver during import" msgstr "匯入時修復來自 pks 金鑰伺服器的損壞" +#| msgid "do not update the trustdb after import" msgid "do not clear the ownertrust values during import" msgstr "匯入過程中不要清除主觀信任值" msgid "do not update the trustdb after import" msgstr "匯入後不要更新信任資料庫" msgid "create a public key when importing a secret key" msgstr "匯入私鑰時亦建立公鑰" msgid "only accept updates to existing keys" msgstr "祇接受既有金鑰的更新" msgid "remove unusable parts from key after import" msgstr "匯入後從金鑰中移除無法使用的部分" msgid "remove as much as possible from key after import" msgstr "匯入後盡可能地從金鑰中移除" #, c-format msgid "skipping block of type %d\n" msgstr "正在跳過 %d 型態的區塊\n" #, c-format msgid "%lu keys processed so far\n" msgstr "目前已處理 %lu 把金鑰\n" #, c-format msgid "Total number processed: %lu\n" msgstr "處理總量: %lu\n" #, c-format msgid " skipped new keys: %lu\n" msgstr " 已跳過的新金鑰: %lu\n" #, c-format msgid " w/o user IDs: %lu\n" msgstr " 沒有使用者的 ID: %lu\n" #, c-format msgid " imported: %lu" msgstr " 已匯入: %lu" #, c-format msgid " unchanged: %lu\n" msgstr " 未改變的: %lu\n" #, c-format msgid " new user IDs: %lu\n" msgstr " 新的使用者 ID: %lu\n" #, c-format msgid " new subkeys: %lu\n" msgstr " 新的子鑰: %lu\n" #, c-format msgid " new signatures: %lu\n" msgstr " 新的簽章: %lu\n" #, c-format msgid " new key revocations: %lu\n" msgstr " 新的金鑰撤銷: %lu\n" #, c-format msgid " secret keys read: %lu\n" msgstr " 已讀取的私鑰: %lu\n" #, c-format msgid " secret keys imported: %lu\n" msgstr " 已匯入的私鑰: %lu\n" #, c-format msgid " secret keys unchanged: %lu\n" msgstr " 未改變的私鑰: %lu\n" #, c-format msgid " not imported: %lu\n" msgstr " 未被匯入: %lu\n" #, c-format msgid " signatures cleaned: %lu\n" msgstr " 已清除的簽章: %lu\n" #, c-format msgid " user IDs cleaned: %lu\n" msgstr " 已清除的使用者 ID: %lu\n" #, c-format msgid "" "WARNING: key %s contains preferences for unavailable\n" "algorithms on these user IDs:\n" msgstr "警告: 金鑰 %s 的偏好設定含有這些使用者 ID 無法使用的演算法:\n" #, c-format msgid " \"%s\": preference for cipher algorithm %s\n" msgstr " \"%s\": 編密演算法 %s 的偏好設定\n" #, c-format msgid " \"%s\": preference for digest algorithm %s\n" msgstr " \"%s\": 摘要演算法 %s 的偏好設定\n" #, c-format msgid " \"%s\": preference for compression algorithm %s\n" msgstr " \"%s\": 壓縮演算法 %s 的偏好設定\n" msgid "it is strongly suggested that you update your preferences and\n" msgstr "我們強烈建議你更新偏好設定, 並重新\n" msgid "re-distribute this key to avoid potential algorithm mismatch problems\n" msgstr "散佈此金鑰, 以避免潛在的演算法不一致問題.\n" #, c-format msgid "you can update your preferences with: gpg --edit-key %s updpref save\n" msgstr "你可以像這樣來更新偏好設定: gpg --edit-key %s updpref save\n" #, c-format msgid "key %s: no user ID\n" msgstr "金鑰 %s: 沒有使用者 ID\n" #, c-format msgid "key %s: %s\n" msgstr "金鑰 %s: %s\n" msgid "rejected by import filter" msgstr "已由匯入過濾器駁回" #, c-format msgid "key %s: PKS subkey corruption repaired\n" msgstr "金鑰 %s: PKS 子鑰的訛誤已被修復\n" #, c-format msgid "key %s: accepted non self-signed user ID \"%s\"\n" msgstr "金鑰 %s: 已接受非自我簽署的使用者 ID \"%s\"\n" #, c-format msgid "key %s: no valid user IDs\n" msgstr "金鑰 %s: 沒有有效的使用者 ID\n" msgid "this may be caused by a missing self-signature\n" msgstr "這可能肇因於遺失自我簽章所致\n" #, c-format msgid "key %s: public key not found: %s\n" msgstr "金鑰 %s: 找不到公鑰: %s\n" #, c-format msgid "key %s: new key - skipped\n" msgstr "金鑰 %s: 新的金鑰 - 已跳過\n" #, c-format msgid "no writable keyring found: %s\n" msgstr "找不到可寫入的鑰匙圈: %s\n" #, c-format msgid "writing to `%s'\n" msgstr "寫入 `%s' 中\n" #, c-format msgid "error writing keyring `%s': %s\n" msgstr "寫入鑰匙圈 `%s' 時出錯: %s\n" #, c-format msgid "key %s: public key \"%s\" imported\n" msgstr "金鑰 %s: 公鑰 \"%s\" 已匯入\n" #, c-format msgid "key %s: doesn't match our copy\n" msgstr "金鑰 %s: 跟我們的副本不吻合\n" #, c-format msgid "key %s: can't locate original keyblock: %s\n" msgstr "金鑰 %s: 無法定址原始的金鑰區塊: %s\n" #, c-format msgid "key %s: can't read original keyblock: %s\n" msgstr "金鑰 %s: 無法讀取原始的金鑰區塊: %s\n" #, c-format msgid "key %s: \"%s\" 1 new user ID\n" msgstr "金鑰 %s: \"%s\" 1 個新的使用者 ID\n" #, c-format msgid "key %s: \"%s\" %d new user IDs\n" msgstr "金鑰 %s: \"%s\" %d 個新的使用者 ID\n" #, c-format msgid "key %s: \"%s\" 1 new signature\n" msgstr "金鑰 %s: \"%s\" 1 份新的簽章\n" #, c-format msgid "key %s: \"%s\" %d new signatures\n" msgstr "金鑰 %s: \"%s\" %d 份新的簽章\n" #, c-format msgid "key %s: \"%s\" 1 new subkey\n" msgstr "金鑰 %s: \"%s\" 1 把新的子鑰\n" #, c-format msgid "key %s: \"%s\" %d new subkeys\n" msgstr "金鑰 %s: \"%s\" %d 把新的子鑰\n" #, c-format msgid "key %s: \"%s\" %d signature cleaned\n" msgstr "金鑰 %s: \"%s\" 已清除 %d 份簽章\n" #, c-format msgid "key %s: \"%s\" %d signatures cleaned\n" msgstr "金鑰 %s: \"%s\" 已清除 %d 份簽章\n" #, c-format msgid "key %s: \"%s\" %d user ID cleaned\n" msgstr "金鑰 %s: \"%s\" 已清除 %d 個使用者 ID\n" #, c-format msgid "key %s: \"%s\" %d user IDs cleaned\n" msgstr "金鑰 %s: \"%s\" 已清除 %d 個使用者 ID\n" #, c-format msgid "key %s: \"%s\" not changed\n" msgstr "金鑰 %s: \"%s\" 未改變\n" #, c-format msgid "secret key %s: %s\n" msgstr "私鑰 %s: %s\n" msgid "importing secret keys not allowed\n" msgstr "未允許匯入私鑰\n" #, c-format msgid "key %s: secret key with invalid cipher %d - skipped\n" msgstr "金鑰 %s: 私鑰使用了無效的 %d 編密法 - 已跳過\n" #, c-format msgid "no default secret keyring: %s\n" msgstr "沒有預設的私鑰鑰匙圈: %s\n" #, c-format msgid "key %s: secret key imported\n" msgstr "金鑰 %s: 私鑰已匯入\n" #, c-format msgid "key %s: already in secret keyring\n" msgstr "金鑰 %s: 已在私鑰鑰匙圈之中了\n" #, c-format msgid "key %s: secret key not found: %s\n" msgstr "金鑰 %s: 找不到私鑰: %s\n" #, c-format msgid "key %s: no public key - can't apply revocation certificate\n" msgstr "金鑰 %s: 沒有公鑰 - 無法套用撤銷憑證\n" #, c-format msgid "key %s: invalid revocation certificate: %s - rejected\n" msgstr "金鑰 %s: 無效的撤銷憑證: %s - 已駁回\n" #, c-format msgid "key %s: \"%s\" revocation certificate imported\n" msgstr "金鑰 %s: \"%s\" 撤銷憑證已匯入\n" #, c-format msgid "key %s: no user ID for signature\n" msgstr "金鑰 %s: 簽章沒有使用者 ID\n" #, c-format msgid "key %s: unsupported public key algorithm on user ID \"%s\"\n" msgstr "金鑰 %s: 使用者 ID \"%s\" 用了未支援的公鑰演算法\n" #, c-format msgid "key %s: invalid self-signature on user ID \"%s\"\n" msgstr "金鑰 %s: 使用者 ID \"%s\" 的自我簽章無效\n" #, c-format msgid "key %s: unsupported public key algorithm\n" msgstr "金鑰 %s: 未支援的公鑰演算法\n" #, c-format msgid "key %s: invalid direct key signature\n" msgstr "金鑰 %s: 無效的直接金鑰簽章\n" #, c-format msgid "key %s: no subkey for key binding\n" msgstr "金鑰 %s: 沒有可供附帶的子鑰\n" #, c-format msgid "key %s: invalid subkey binding\n" msgstr "金鑰 %s: 無效的附帶子鑰\n" #, c-format msgid "key %s: removed multiple subkey binding\n" msgstr "金鑰 %s: 多重附帶子鑰已移除\n" #, c-format msgid "key %s: no subkey for key revocation\n" msgstr "金鑰 %s: 沒有子鑰可供金鑰撤銷\n" #, c-format msgid "key %s: invalid subkey revocation\n" msgstr "金鑰 %s: 無效的子鑰撤銷\n" #, c-format msgid "key %s: removed multiple subkey revocation\n" msgstr "金鑰 %s: 多重子鑰撤銷已移除\n" #, c-format msgid "key %s: skipped user ID \"%s\"\n" msgstr "金鑰 %s: 使用者 ID \"%s\" 已跳過\n" #, c-format msgid "key %s: skipped subkey\n" msgstr "金鑰 %s: 子鑰已跳過\n" # here we violate the rfc a bit by still allowing # * to import non-exportable signature when we have the # * the secret key used to create this signature - it # * seems that this makes sense #, c-format msgid "key %s: non exportable signature (class 0x%02X) - skipped\n" msgstr "金鑰 %s: 不可匯出的簽章 (等級 0x%02X) - 已跳過\n" #, c-format msgid "key %s: revocation certificate at wrong place - skipped\n" msgstr "金鑰 %s: 撤銷憑證在錯誤的地方 - 已跳過\n" #, c-format msgid "key %s: invalid revocation certificate: %s - skipped\n" msgstr "金鑰 %s: 無效的撤銷憑證: %s - 已跳過\n" #, c-format msgid "key %s: subkey signature in wrong place - skipped\n" msgstr "金鑰 %s: 子鑰簽章在錯誤的地方 - 已跳過\n" #, c-format msgid "key %s: unexpected signature class (0x%02X) - skipped\n" msgstr "金鑰 %s: 非預期的簽章等級 (0x%02X) - 已跳過\n" #, c-format msgid "key %s: duplicated user ID detected - merged\n" msgstr "金鑰 %s: 偵測到重複的使用者 ID - 已合併\n" #, c-format msgid "WARNING: key %s may be revoked: fetching revocation key %s\n" msgstr "警告: 金鑰 %s 可能被撤銷了: 正在取回撤銷金鑰 %s\n" #, c-format msgid "WARNING: key %s may be revoked: revocation key %s not present.\n" msgstr "警告: 金鑰 %s 可能被撤銷了: 撤銷金鑰 %s 未出現.\n" #, c-format msgid "key %s: \"%s\" revocation certificate added\n" msgstr "金鑰 %s: 已新增 \"%s\" 撤銷憑證\n" #, c-format msgid "key %s: direct key signature added\n" msgstr "金鑰 %s: 已新增直接金鑰簽章\n" msgid "NOTE: a key's S/N does not match the card's one\n" msgstr "請注意: 金鑰的序號 (S/N) 與卡片上的並不一致\n" msgid "NOTE: primary key is online and stored on card\n" msgstr "請注意: 主鑰在線上且已存放於卡片上了\n" msgid "NOTE: secondary key is online and stored on card\n" msgstr "請注意: 子鑰在線上且已存放於卡片上了\n" #, c-format msgid "error creating keyring `%s': %s\n" msgstr "建立 `%s' 鑰匙圈時出錯: %s\n" #, c-format msgid "keyring `%s' created\n" msgstr "`%s' 鑰匙圈已建立\n" #, c-format msgid "keyblock resource `%s': %s\n" msgstr "`%s' 金鑰區塊資源: %s\n" #, c-format msgid "failed to rebuild keyring cache: %s\n" msgstr "重新建立鑰匙圈快取失敗: %s\n" msgid "[revocation]" msgstr "[撤銷]" msgid "[self-signature]" msgstr "[自我簽章]" msgid "1 bad signature\n" msgstr "1 份損壞的簽章\n" #, c-format msgid "%d bad signatures\n" msgstr "%d 份損壞的簽章\n" msgid "1 signature not checked due to a missing key\n" msgstr "有 1 份簽章因為遺失金鑰而未被檢查\n" #, c-format msgid "%d signatures not checked due to missing keys\n" msgstr "有 %d 份簽章因為遺失金鑰而未被檢查\n" msgid "1 signature not checked due to an error\n" msgstr "有 1 份簽章因錯誤而未被檢查\n" #, c-format msgid "%d signatures not checked due to errors\n" msgstr "有 %d 份簽章因錯誤而未被檢查\n" msgid "1 user ID without valid self-signature detected\n" msgstr "偵測到 1 個沒有有效自我簽章的使用者 ID\n" #, c-format msgid "%d user IDs without valid self-signatures detected\n" msgstr "偵測到 %d 個沒有有效自我簽章的使用者 ID\n" msgid "" "Please decide how far you trust this user to correctly verify other users' " "keys\n" "(by looking at passports, checking fingerprints from different sources, " "etc.)\n" msgstr "" "請判斷你有多信任這位使用者確實驗證其他使用者的金鑰\n" "(像是查對身份證, 或從不同的來源檢查指紋等...）的能力\n" #, c-format msgid " %d = I trust marginally\n" msgstr " %d = 我勉強信任\n" #, c-format msgid " %d = I trust fully\n" msgstr " %d = 我完全信任\n" msgid "" "Please enter the depth of this trust signature.\n" "A depth greater than 1 allows the key you are signing to make\n" "trust signatures on your behalf.\n" msgstr "" "請輸入此信任簽章的深度.\n" "深度大於 1 的話就表示你信任這把正被簽署的金鑰,\n" "同時也信任這把金鑰所簽署的信任簽章.\n" msgid "Please enter a domain to restrict this signature, or enter for none.\n" msgstr "請輸入約束此簽章的網域, 若無請直接按下 [Enter].\n" #, c-format msgid "User ID \"%s\" is revoked." msgstr "使用者 ID \"%s\" 已撤銷." msgid "Are you sure you still want to sign it? (y/N) " msgstr "你仍然想要簽署它嗎? (y/N) " msgid " Unable to sign.\n" msgstr " 無法簽署.\n" #, c-format msgid "User ID \"%s\" is expired." msgstr "使用者 ID \"%s\" 已過期." #, c-format msgid "User ID \"%s\" is not self-signed." msgstr "使用者 ID \"%s\" 未經自我簽署." #, c-format msgid "User ID \"%s\" is signable. " msgstr "使用者 ID \"%s\" 可被簽署." msgid "Sign it? (y/N) " msgstr "是否要簽署? (y/N) " #, c-format msgid "" "The self-signature on \"%s\"\n" "is a PGP 2.x-style signature.\n" msgstr "" "\"%s\" 裡的自我簽章\n" "是 PGP 2.x 型態的簽章.\n" msgid "Do you want to promote it to an OpenPGP self-signature? (y/N) " msgstr "你是否想要將它升級成 OpenPGP 自我簽章? (y/N) " #, c-format msgid "" "Your current signature on \"%s\"\n" "has expired.\n" msgstr "" "你目前在 \"%s\" 的簽章\n" "已經過期了.\n" msgid "Do you want to issue a new signature to replace the expired one? (y/N) " msgstr "你想要發佈一份新的簽章來取代已過期的那個嗎? (y/N) " #, c-format msgid "" "Your current signature on \"%s\"\n" "is a local signature.\n" msgstr "" "你目前在 \"%s\" 的簽章\n" "是一份本機簽章.\n" msgid "Do you want to promote it to a full exportable signature? (y/N) " msgstr "你是否想要把他升級成可以完全匯出的簽章? (y/N) " #, c-format msgid "\"%s\" was already locally signed by key %s\n" msgstr "\"%s\" 已經被金鑰 %s 在本機簽署了\n" #, c-format msgid "\"%s\" was already signed by key %s\n" msgstr "\"%s\" 已經被金鑰 %s 簽署了\n" msgid "Do you want to sign it again anyway? (y/N) " msgstr "你仍然想要再次簽署它嗎? (y/N) " #, c-format msgid "Nothing to sign with key %s\n" msgstr "沒有東西可以讓金鑰 %s 簽署\n" msgid "This key has expired!" msgstr "這把金鑰已經過期了!" #, c-format msgid "This key is due to expire on %s.\n" msgstr "這把金鑰將在 %s 過期.\n" msgid "Do you want your signature to expire at the same time? (Y/n) " msgstr "你想要讓你的簽章也在同一個時候過期嗎? (Y/n) " msgid "" "You may not make an OpenPGP signature on a PGP 2.x key while in --pgp2 " "mode.\n" msgstr "你不能在 --pgp2 模式下, 拿 PGP 2.x 金鑰做出 OpenPGP 簽章.\n" msgid "This would make the key unusable in PGP 2.x.\n" msgstr "這會讓這把金鑰在 PGP 2.x 模式下無法使用.\n" msgid "" "How carefully have you verified the key you are about to sign actually " "belongs\n" "to the person named above? If you don't know what to answer, enter \"0\".\n" msgstr "" "你有多謹慎檢查正要簽署的金鑰確實屬於上面那個人的名字呢?\n" "如果你不知道這個問題的答案, 請輸入 \"0\".\n" #, c-format msgid " (0) I will not answer.%s\n" msgstr " (0) 我不作答.%s\n" #, c-format msgid " (1) I have not checked at all.%s\n" msgstr " (1) 我根本沒有檢查過.%s\n" #, c-format msgid " (2) I have done casual checking.%s\n" msgstr " (2) 我隨意檢查過了.%s\n" #, c-format msgid " (3) I have done very careful checking.%s\n" msgstr " (3) 我非常小心地檢查過了.%s\n" msgid "Your selection? (enter `?' for more information): " msgstr "你的選擇是? (輸入 `?' 以取得更多資訊): " #, c-format msgid "" "Are you sure that you want to sign this key with your\n" "key \"%s\" (%s)\n" msgstr "" "你真的確定要用你的金鑰 \"%s\" (%s)\n" "來簽署這把金鑰嗎\n" msgid "This will be a self-signature.\n" msgstr "這將會是一份自我簽章.\n" msgid "WARNING: the signature will not be marked as non-exportable.\n" msgstr "警告: 這份簽章不會被標記為不可匯出.\n" msgid "WARNING: the signature will not be marked as non-revocable.\n" msgstr "警告: 這份簽章不會被標記成不可撤銷.\n" msgid "The signature will be marked as non-exportable.\n" msgstr "這份簽章會被標記成不可匯出.\n" msgid "The signature will be marked as non-revocable.\n" msgstr "這份簽章會被標記成不可撤銷.\n" msgid "I have not checked this key at all.\n" msgstr "我根本沒有檢查過這把金鑰.\n" msgid "I have checked this key casually.\n" msgstr "我隨意檢查過這把金鑰了.\n" msgid "I have checked this key very carefully.\n" msgstr "我非常小心地檢查過這把金鑰了.\n" msgid "Really sign? (y/N) " msgstr "真的要簽署嗎? (y/N)" #, c-format msgid "signing failed: %s\n" msgstr "簽署時失敗: %s\n" msgid "Key has only stub or on-card key items - no passphrase to change.\n" msgstr "金鑰祇剩下殘骸或者祇含有卡上金鑰項目 - 沒有可變更的密語.\n" msgid "This key is not protected.\n" msgstr "這把金鑰未被保護.\n" msgid "Secret parts of primary key are not available.\n" msgstr "主鑰的私鑰部分無法取用.\n" msgid "Secret parts of primary key are stored on-card.\n" msgstr "主鑰的私鑰部分存放於卡上.\n" msgid "Key is protected.\n" msgstr "金鑰已保護.\n" #, c-format msgid "Can't edit this key: %s\n" msgstr "無法編輯這把金鑰: %s\n" msgid "" "Enter the new passphrase for this secret key.\n" "\n" msgstr "" "請輸入要給這把私鑰用的新密語.\n" "\n" msgid "passphrase not correctly repeated; try again" msgstr "前後兩次輸入的密語不一致; 請再試一次" msgid "" "You don't want a passphrase - this is probably a *bad* idea!\n" "\n" msgstr "" "你不想要用密語 - 這大概是個 *糟* 點子!\n" "\n" msgid "Do you really want to do this? (y/N) " msgstr "你真的想要這麼做嗎? (y/N) " msgid "moving a key signature to the correct place\n" msgstr "正在把金鑰的簽章搬移到正確的位置去\n" msgid "save and quit" msgstr "儲存並離開" msgid "show key fingerprint" msgstr "顯示金鑰指紋" msgid "list key and user IDs" msgstr "列出金鑰和使用者 ID" msgid "select user ID N" msgstr "選擇使用者 ID N" msgid "select subkey N" msgstr "選擇子鑰 N" msgid "check signatures" msgstr "檢查簽章" msgid "sign selected user IDs [* see below for related commands]" msgstr "簽署所選的使用者 ID [* 請參見底下相關的註解]" msgid "sign selected user IDs locally" msgstr "僅在本機簽署所選的使用者 ID" msgid "sign selected user IDs with a trust signature" msgstr "用信任簽章來簽署所選的使用者 ID" msgid "sign selected user IDs with a non-revocable signature" msgstr "用不可撤銷的簽章來簽署所選的使用者 ID" msgid "add a user ID" msgstr "增加使用者 ID" msgid "add a photo ID" msgstr "增加照片 ID" msgid "delete selected user IDs" msgstr "刪除所選的使用者 ID" msgid "add a subkey" msgstr "增加子鑰" msgid "add a key to a smartcard" msgstr "將金鑰加到智慧卡" msgid "move a key to a smartcard" msgstr "將金鑰移動到智慧卡" msgid "move a backup key to a smartcard" msgstr "將備份金鑰移動到智慧卡" msgid "delete selected subkeys" msgstr "刪除所選的子鑰" msgid "add a revocation key" msgstr "增加撤銷金鑰" msgid "delete signatures from the selected user IDs" msgstr "從所選的使用者 ID 中刪除簽章" msgid "change the expiration date for the key or selected subkeys" msgstr "變更金鑰或所選子鑰的使用期限" msgid "flag the selected user ID as primary" msgstr "把所選的使用者 ID 標為主要" msgid "toggle between the secret and public key listings" msgstr "在私鑰清單和公鑰清單間切換" msgid "list preferences (expert)" msgstr "列出偏好 (專家模式)" msgid "list preferences (verbose)" msgstr "列出偏好 (囉唆模式)" msgid "set preference list for the selected user IDs" msgstr "設定所選使用者 ID 的偏好清單" msgid "set the preferred keyserver URL for the selected user IDs" msgstr "為所選的使用者 ID 設定偏好的金鑰伺服器 URL" msgid "set a notation for the selected user IDs" msgstr "為所選的使用者 ID 設定註記" msgid "change the passphrase" msgstr "更改密語" msgid "change the ownertrust" msgstr "更改主觀信任" msgid "revoke signatures on the selected user IDs" msgstr "撤銷所選使用者 ID 的簽章" msgid "revoke selected user IDs" msgstr "撤銷所選的使用者 ID" msgid "revoke key or selected subkeys" msgstr "撤銷金鑰或所選的子鑰" msgid "enable key" msgstr "啟用金鑰" msgid "disable key" msgstr "停用金鑰" msgid "show selected photo IDs" msgstr "顯示所選的照片 ID" msgid "compact unusable user IDs and remove unusable signatures from key" msgstr "從金鑰中精簡無法使用的使用者 ID 並移除無法使用的簽章" msgid "compact unusable user IDs and remove all signatures from key" msgstr "從金鑰中精簡無法使用的使用者 ID 並移除所有的簽章" #, c-format msgid "error reading secret keyblock \"%s\": %s\n" msgstr "讀取私鑰區塊 \"%s\" 時出錯: %s\n" msgid "Secret key is available.\n" msgstr "私鑰可用.\n" msgid "Need the secret key to do this.\n" msgstr "要有私鑰纔能這麼做.\n" msgid "Please use the command \"toggle\" first.\n" msgstr "請先使用 \"toggle\" 指令.\n" msgid "" "* The `sign' command may be prefixed with an `l' for local signatures " "(lsign),\n" " a `t' for trust signatures (tsign), an `nr' for non-revocable signatures\n" " (nrsign), or any combination thereof (ltsign, tnrsign, etc.).\n" msgstr "" "* 這個 `sign' 指令也可以在前面加上一個 `l' 字母, 來表示本機簽章 (lsign),\n" " 加上 `t' 的話就是信任簽章 (tsign), 加上 `nr' 的話就是不可撤銷簽章\n" " (nrsign), 當然也可以任意組合這些選項 (像是 ltsign, tnrsign 等等.).\n" msgid "Key is revoked." msgstr "金鑰已撤銷." msgid "Really sign all user IDs? (y/N) " msgstr "真的要簽署所有的使用者 ID 嗎? (y/N) " msgid "Hint: Select the user IDs to sign\n" msgstr "提示: 選擇使用者 ID 來加以簽署\n" #, c-format msgid "Unknown signature type `%s'\n" msgstr "未知的 `%s' 簽章種類\n" #, c-format msgid "This command is not allowed while in %s mode.\n" msgstr "在 %s 模式中不允許使用這個指令.\n" msgid "You must select at least one user ID.\n" msgstr "你至少得選擇一個使用者 ID.\n" msgid "You can't delete the last user ID!\n" msgstr "你不能刪除最後一個使用者 ID!\n" msgid "Really remove all selected user IDs? (y/N) " msgstr "真的要移除所有被選擇的使用者 ID 嗎? (y/N) " msgid "Really remove this user ID? (y/N) " msgstr "真的要移除這個使用者 ID 嗎? (y/N) " #. TRANSLATORS: Please take care: This is about #. moving the key and not about removing it. msgid "Really move the primary key? (y/N) " msgstr "真的要移動主鑰嗎? (y/N) " msgid "You must select exactly one key.\n" msgstr "你一定祇得選擇一把金鑰.\n" msgid "Command expects a filename argument\n" msgstr "這項指令要拿一個檔名來當作引數\n" #, c-format msgid "Can't open `%s': %s\n" msgstr "無法開啟 `%s': %s\n" #, c-format msgid "Error reading backup key from `%s': %s\n" msgstr "從 `%s' 讀取備份金鑰時出錯: %s\n" msgid "You must select at least one key.\n" msgstr "你至少得選擇一把金鑰.\n" msgid "Do you really want to delete the selected keys? (y/N) " msgstr "你真的想要刪除所選的金鑰嗎? (y/N) " msgid "Do you really want to delete this key? (y/N) " msgstr "你真的想要刪除這把金鑰嗎? (y/N) " msgid "Really revoke all selected user IDs? (y/N) " msgstr "真的要撤銷所有所選的使用者 ID 嗎? (y/N) " msgid "Really revoke this user ID? (y/N) " msgstr "真的要撤銷這個使用者 ID 嗎? (y/N) " msgid "Do you really want to revoke the entire key? (y/N) " msgstr "你真的想要撤銷這整把金鑰嗎? (y/N) " msgid "Do you really want to revoke the selected subkeys? (y/N) " msgstr "你真的想要撤銷所選的子鑰嗎? (y/N) " msgid "Do you really want to revoke this subkey? (y/N) " msgstr "你真的想要撤銷這把子鑰嗎? (y/N) " msgid "Owner trust may not be set while using a user provided trust database\n" msgstr "使用使用者所提供的信任資料庫時可能無法設定主觀信任\n" msgid "Set preference list to:\n" msgstr "設定偏好清單至:\n" msgid "Really update the preferences for the selected user IDs? (y/N) " msgstr "真的要更新所選使用者 ID 的偏好設定嗎? (y/N) " msgid "Really update the preferences? (y/N) " msgstr "真的要更新偏好設定嗎? (y/N) " msgid "Save changes? (y/N) " msgstr "要儲存變更嗎? (y/N) " msgid "Quit without saving? (y/N) " msgstr "要不儲存就離開嗎? (y/N) " #, c-format msgid "update failed: %s\n" msgstr "更新失敗: %s\n" #, c-format msgid "update secret failed: %s\n" msgstr "更新私鑰失敗: %s\n" msgid "Key not changed so no update needed.\n" msgstr "金鑰沒有變更所以不需要更新.\n" msgid "Digest: " msgstr "摘要: " msgid "Features: " msgstr "特點: " msgid "Keyserver no-modify" msgstr "金鑰伺服器無修改" msgid "Preferred keyserver: " msgstr "偏好的金鑰伺服器: " msgid "Notations: " msgstr "註記: " msgid "There are no preferences on a PGP 2.x-style user ID.\n" msgstr "PGP 2.x 型態的使用者 ID 沒有偏好設定.\n" #, c-format msgid "The following key was revoked on %s by %s key %s\n" msgstr "下列金鑰已經在 %s 時被 %s 金鑰 %s 所撤銷\n" #, c-format msgid "This key may be revoked by %s key %s" msgstr "這把金鑰可能被 %s 金鑰 %s 所撤銷" msgid "(sensitive)" msgstr "(機密)" #, c-format msgid "created: %s" msgstr "建立: %s" #, c-format msgid "revoked: %s" msgstr "撤銷: %s" # of subkey #, c-format msgid "expired: %s" msgstr "過期: %s" # of subkey #, c-format msgid "expires: %s" msgstr "到期: %s" #, c-format msgid "usage: %s" msgstr "用途: %s" #, c-format msgid "trust: %s" msgstr "信任: %s" #, c-format msgid "validity: %s" msgstr "有效性: %s" msgid "This key has been disabled" msgstr "這把金鑰已經停用了" msgid "card-no: " msgstr "卡片編號: " msgid "" "Please note that the shown key validity is not necessarily correct\n" "unless you restart the program.\n" msgstr "" "請注意顯示出來的金鑰有效性不需要更正,\n" "除非你重新執行程式.\n" msgid "revoked" msgstr "已撤銷" msgid "expired" msgstr "已過期" msgid "" "WARNING: no user ID has been marked as primary. This command may\n" " cause a different user ID to become the assumed primary.\n" msgstr "" "警告: 沒有任何使用者 ID 被標示為主要 ID. 這項指令可能會\n" " 導致不同的使用者 ID 被當成主要 ID.\n" msgid "" "WARNING: This is a PGP2-style key. Adding a photo ID may cause some " "versions\n" " of PGP to reject this key.\n" msgstr "" "警告: 這是一把 PGP2 型態的金鑰.\n" " 增加照片 ID 可能會導致某些版本的 PGP 駁回這把金鑰.\n" msgid "Are you sure you still want to add it? (y/N) " msgstr "你確定仍然想要增加嗎? (y/N) " msgid "You may not add a photo ID to a PGP2-style key.\n" msgstr "你不可以把照片 ID 增加到 PGP2 型態的金鑰裡.\n" msgid "Delete this good signature? (y/N/q)" msgstr "刪除這份完好的簽章嗎? (y/N/q)" msgid "Delete this invalid signature? (y/N/q)" msgstr "刪除這份無效的簽章嗎? (y/N/q)" msgid "Delete this unknown signature? (y/N/q)" msgstr "刪除這份未知的簽章嗎? (y/N/q)" msgid "Really delete this self-signature? (y/N)" msgstr "真的要刪除這份自我簽章嗎? (y/N)" #, c-format msgid "Deleted %d signature.\n" msgstr "已經刪除了 %d 份簽章.\n" #, c-format msgid "Deleted %d signatures.\n" msgstr "已經刪除了 %d 份簽章.\n" msgid "Nothing deleted.\n" msgstr "沒有刪除任何東西.\n" msgid "invalid" msgstr "無效" #, c-format msgid "User ID \"%s\" compacted: %s\n" msgstr "使用者 ID \"%s\" 已精簡: %s\n" #, c-format msgid "User ID \"%s\": %d signature removed\n" msgstr "使用者 ID \"%s\": 已移除 %d 份簽章\n" #, c-format msgid "User ID \"%s\": %d signatures removed\n" msgstr "使用者 ID \"%s\": 已移除 %d 份簽章\n" #, c-format msgid "User ID \"%s\": already minimized\n" msgstr "使用者 ID \"%s\": 已經最小化了\n" #, c-format msgid "User ID \"%s\": already clean\n" msgstr "使用者 ID \"%s\": 已經是乾淨的了\n" msgid "" "WARNING: This is a PGP 2.x-style key. Adding a designated revoker may " "cause\n" " some versions of PGP to reject this key.\n" msgstr "" "警告: 這是一把 PGP2 型態的金鑰.\n" " 增加指定撤銷者可能會導致某些版本的 PGP 駁回這把金鑰.\n" msgid "You may not add a designated revoker to a PGP 2.x-style key.\n" msgstr "你不可以把指定撤銷者增加到 PGP2 型態的金鑰裡.\n" msgid "Enter the user ID of the designated revoker: " msgstr "輸入指定撤銷者的使用者 ID: " msgid "cannot appoint a PGP 2.x style key as a designated revoker\n" msgstr "無法將 PGP 2.x 型態的金鑰指派為指定撤銷者\n" # This actually causes no harm (after all, a key that # designates itself as a revoker is the same as a # regular key), but it's easy enough to check. msgid "you cannot appoint a key as its own designated revoker\n" msgstr "你不能指派某把金鑰為它自己的指定撤銷者\n" msgid "this key has already been designated as a revoker\n" msgstr "已指定這把金鑰為撤銷者了\n" msgid "WARNING: appointing a key as a designated revoker cannot be undone!\n" msgstr "警告: 一旦把某把金鑰指派為指定撤銷者後, 就無法反悔了!\n" msgid "" "Are you sure you want to appoint this key as a designated revoker? (y/N) " msgstr "你確定要指派這把金鑰為指定撤銷者嗎? (y/N) " msgid "Please remove selections from the secret keys.\n" msgstr "請從私鑰中移除選擇.\n" msgid "Please select at most one subkey.\n" msgstr "請至多選擇一把子鑰.\n" msgid "Changing expiration time for a subkey.\n" msgstr "正在變更子鑰的使用期限.\n" msgid "Changing expiration time for the primary key.\n" msgstr "正在變更主鑰的使用期限.\n" msgid "You can't change the expiration date of a v3 key\n" msgstr "你不能變更 v3 金鑰的使用期限\n" msgid "No corresponding signature in secret ring\n" msgstr "在私鑰圈裡沒有一致的簽章\n" #, c-format msgid "signing subkey %s is already cross-certified\n" msgstr "簽署子鑰 %s 已經交叉認證過了\n" #, c-format msgid "subkey %s does not sign and so does not need to be cross-certified\n" msgstr "子鑰 %s 不做簽署之用, 因此無須交叉驗證\n" msgid "Please select exactly one user ID.\n" msgstr "請祇選擇一個使用者 ID.\n" #, c-format msgid "skipping v3 self-signature on user ID \"%s\"\n" msgstr "正在跳過使用者 ID \"%s\" 的 v3 自我簽章\n" msgid "Enter your preferred keyserver URL: " msgstr "請輸入你的偏好金鑰伺服器 URL: " msgid "Are you sure you want to replace it? (y/N) " msgstr "你確定要取代它嗎？ (y/N) " msgid "Are you sure you want to delete it? (y/N) " msgstr "你確定要刪除它嗎？ (y/N) " msgid "Enter the notation: " msgstr "請輸入註記: " msgid "Proceed? (y/N) " msgstr "是否繼續? (y/N) " #, c-format msgid "No user ID with index %d\n" msgstr "索引 %d 沒有對應到使用者 ID\n" #, c-format msgid "No user ID with hash %s\n" msgstr "雜湊 %s 沒有對應到使用者 ID\n" #, c-format msgid "No subkey with index %d\n" msgstr "索引 %d 沒有對應到子鑰\n" #, c-format msgid "user ID: \"%s\"\n" msgstr "使用者 ID: \"%s\"\n" #, c-format msgid "signed by your key %s on %s%s%s\n" msgstr "已被你的金鑰 %s 於 %s%s%s 所簽署\n" msgid " (non-exportable)" msgstr " (不可匯出)" #, c-format msgid "This signature expired on %s.\n" msgstr "這份簽章已經在 %s 過期了.\n" msgid "Are you sure you still want to revoke it? (y/N) " msgstr "你確定仍然想要撤銷它嗎? (y/N) " msgid "Create a revocation certificate for this signature? (y/N) " msgstr "要為這份簽章建立一份撤銷憑證嗎? (y/N) " msgid "Not signed by you.\n" msgstr "並非由你所簽署.\n" #, c-format msgid "You have signed these user IDs on key %s:\n" msgstr "你已經簽署了金鑰 %s 上的這些使用者 ID:\n" msgid " (non-revocable)" msgstr " (不可撤銷)" #, c-format msgid "revoked by your key %s on %s\n" msgstr "被你的金鑰 %s 於 %s 所撤銷了\n" msgid "You are about to revoke these signatures:\n" msgstr "你正要撤銷這些簽章:\n" msgid "Really create the revocation certificates? (y/N) " msgstr "真的要建立撤銷憑證嗎? (y/N) " msgid "no secret key\n" msgstr "沒有私鑰\n" #, c-format msgid "user ID \"%s\" is already revoked\n" msgstr "使用者 ID \"%s\" 已撤銷\n" #, c-format msgid "WARNING: a user ID signature is dated %d seconds in the future\n" msgstr "警告: 有一份使用者 ID 的簽章日期為 %d 秒後的未來\n" #, c-format msgid "Key %s is already revoked.\n" msgstr "金鑰 %s 已撤銷.\n" #, c-format msgid "Subkey %s is already revoked.\n" msgstr "子鑰 %s 已撤銷.\n" #, c-format msgid "Displaying %s photo ID of size %ld for key %s (uid %d)\n" msgstr "正在顯示 %s 照片 ID, 其尺寸為 %ld, 屬於金鑰 %s (uid %d) 的照片\n" #, c-format msgid "preference `%s' duplicated\n" msgstr "偏好設定 `%s' 重複了\n" msgid "too many cipher preferences\n" msgstr "編密偏好過多\n" msgid "too many digest preferences\n" msgstr "摘要偏好過多\n" msgid "too many compression preferences\n" msgstr "壓縮偏好過多\n" #, c-format msgid "invalid item `%s' in preference string\n" msgstr "偏好字串中含有無效的 `%s' 項目\n" msgid "writing direct signature\n" msgstr "寫入直接簽章中\n" msgid "writing self signature\n" msgstr "寫入自我簽章中\n" msgid "writing key binding signature\n" msgstr "寫入附鑰簽章中\n" #, c-format msgid "keysize invalid; using %u bits\n" msgstr "金鑰尺寸無效; 改用 %u 位元\n" #, c-format msgid "keysize rounded up to %u bits\n" msgstr "金鑰尺寸增大到 %u 位元\n" msgid "" "WARNING: some OpenPGP programs can't handle a DSA key with this digest size\n" msgstr "警告: 某些 OpenPGP 程式無法處理具有此摘要尺寸的 DSA 金鑰\n" msgid "Sign" msgstr "簽署" msgid "Certify" msgstr "保證" msgid "Encrypt" msgstr "加密" msgid "Authenticate" msgstr "鑑定" #. TRANSLATORS: Please use only plain ASCII characters for the #. translation. If this is not possible use single digits. The #. string needs to 8 bytes long. Here is a description of the #. functions: #. #. s = Toggle signing capability #. e = Toggle encryption capability #. a = Toggle authentication capability #. q = Finish #. msgid "SsEeAaQq" msgstr "SsEeAaQq" #, c-format msgid "Possible actions for a %s key: " msgstr "%s 金鑰可能的動作: " msgid "Current allowed actions: " msgstr "目前可進行的動作: " #, c-format msgid " (%c) Toggle the sign capability\n" msgstr " (%c) 切換簽署性能\n" #, c-format msgid " (%c) Toggle the encrypt capability\n" msgstr " (%c) 切換加密性能\n" #, c-format msgid " (%c) Toggle the authenticate capability\n" msgstr " (%c) 切換鑑定性能\n" #, c-format msgid " (%c) Finished\n" msgstr " (%c) 已完成\n" msgid "Please select what kind of key you want:\n" msgstr "請選擇你要使用的金鑰種類:\n" #, c-format msgid " (%d) RSA and RSA (default)\n" msgstr " (%d) RSA 和 RSA (預設)\n" #, c-format msgid " (%d) DSA and Elgamal\n" msgstr " (%d) DSA 和 Elgamal\n" #, c-format msgid " (%d) DSA (sign only)\n" msgstr " (%d) DSA (僅能用於簽署)\n" #, c-format msgid " (%d) RSA (sign only)\n" msgstr " (%d) RSA (僅能用於簽署)\n" #, c-format msgid " (%d) Elgamal (encrypt only)\n" msgstr " (%d) Elgamal (僅能用於加密)\n" #, c-format msgid " (%d) RSA (encrypt only)\n" msgstr " (%d) RSA (僅能用於加密)\n" #, c-format msgid " (%d) DSA (set your own capabilities)\n" msgstr " (%d) DSA (你能自己設定性能)\n" #, c-format msgid " (%d) RSA (set your own capabilities)\n" msgstr " (%d) RSA (你能自己設定性能)\n" #, c-format msgid "%s keys may be between %u and %u bits long.\n" msgstr "%s 金鑰的長度可能介於 %u 位元和 %u 位元之間.\n" #, c-format msgid "What keysize do you want for the subkey? (%u) " msgstr "你的子鑰想要用多大的金鑰尺寸? (%u) " #, c-format msgid "What keysize do you want? (%u) " msgstr "你想要用多大的金鑰尺寸? (%u) " #, c-format msgid "Requested keysize is %u bits\n" msgstr "你所要求的金鑰尺寸是 %u 位元\n" msgid "" "Please specify how long the key should be valid.\n" " 0 = key does not expire\n" " = key expires in n days\n" " w = key expires in n weeks\n" " m = key expires in n months\n" " y = key expires in n years\n" msgstr "" "請指定這把金鑰的有效期限是多久.\n" " 0 = 金鑰不會過期\n" " = 金鑰在 n 天後會到期\n" " w = 金鑰在 n 週後會到期\n" " m = 金鑰在 n 月後會到期\n" " y = 金鑰在 n 年後會到期\n" msgid "" "Please specify how long the signature should be valid.\n" " 0 = signature does not expire\n" " = signature expires in n days\n" " w = signature expires in n weeks\n" " m = signature expires in n months\n" " y = signature expires in n years\n" msgstr "" "請指定這份簽章的有效期限是多久.\n" " 0 = 簽章不會過期\n" " = 簽章在 n 天後會到期\n" " w = 簽章在 n 週後會到期\n" " m = 簽章在 n 月後會到期\n" " y = 簽章在 n 年後會到期\n" msgid "Key is valid for? (0) " msgstr "金鑰的有效期限是多久? (0) " #, c-format msgid "Signature is valid for? (%s) " msgstr "簽章的有效期限是多久? (%s) " msgid "invalid value\n" msgstr "無效的數值\n" msgid "Key does not expire at all\n" msgstr "金鑰完全不會過期\n" msgid "Signature does not expire at all\n" msgstr "簽章完全不會過期\n" #, c-format msgid "Key expires at %s\n" msgstr "金鑰將會在 %s 到期\n" #, c-format msgid "Signature expires at %s\n" msgstr "簽章將會在 %s 到期.\n" msgid "" "Your system can't display dates beyond 2038.\n" "However, it will be correctly handled up to 2106.\n" msgstr "" "你的系統無法顯示 2038 年以後的日期.\n" "不過, 它可以正確處理直到 2106 年之前的年份.\n" msgid "Is this correct? (y/N) " msgstr "以上正確嗎? (y/N) " msgid "" "\n" "GnuPG needs to construct a user ID to identify your key.\n" "\n" msgstr "" "\n" "GnuPG 需要建構使用者 ID 以識別你的金鑰.\n" "\n" #. TRANSLATORS: This string is in general not anymore used #. but you should keep your existing translation. In case #. the new string is not translated this old string will #. be used. msgid "" "\n" "You need a user ID to identify your key; the software constructs the user " "ID\n" "from the Real Name, Comment and Email Address in this form:\n" " \"Heinrich Heine (Der Dichter) \"\n" "\n" msgstr "" "\n" "你需要一個使用者 ID 來辨識你的金鑰; 這個軟體會用真實姓名,\n" "註釋和電子郵件地址組合成使用者 ID 如下:\n" " \"Ke-Huan Lin (Jedi) \"\n" "\n" msgid "Real name: " msgstr "真實姓名: " msgid "Invalid character in name\n" msgstr "姓名含有無效的字符\n" msgid "Name may not start with a digit\n" msgstr "姓名不可以用數字開頭\n" msgid "Name must be at least 5 characters long\n" msgstr "姓名至少要有五個字符長\n" msgid "Email address: " msgstr "電子郵件地址: " msgid "Not a valid email address\n" msgstr "不是有效的電子郵件地址\n" msgid "Comment: " msgstr "註釋: " msgid "Invalid character in comment\n" msgstr "註釋含有無效的字符\n" #, c-format msgid "You are using the `%s' character set.\n" msgstr "你正在使用 `%s' 字元集.\n" #, c-format msgid "" "You selected this USER-ID:\n" " \"%s\"\n" "\n" msgstr "" "你選擇了這個使用者 ID:\n" " \"%s\"\n" "\n" msgid "Please don't put the email address into the real name or the comment\n" msgstr "請不要把電子郵件地址放進你的真實姓名或註釋裡\n" msgid "Such a user ID already exists on this key!\n" msgstr "這把金鑰上已經有這樣子的使用者 ID 了!\n" #. TRANSLATORS: These are the allowed answers in #. lower and uppercase. Below you will find the matching #. string which should be translated accordingly and the #. letter changed to match the one in the answer string. #. #. n = Change name #. c = Change comment #. e = Change email #. o = Okay (ready, continue) #. q = Quit #. msgid "NnCcEeOoQq" msgstr "NnCcEeOoQq" msgid "Change (N)ame, (C)omment, (E)mail or (Q)uit? " msgstr "變更姓名(N), 註釋(C), 電子郵件地址(E)或退出(Q)? " msgid "Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? " msgstr "變更姓名(N), 註釋(C), 電子郵件地址(E)或確定(O)/退出(Q)? " msgid "Please correct the error first\n" msgstr "請先訂正錯誤\n" msgid "" "You need a Passphrase to protect your secret key.\n" "\n" msgstr "" "你需要一個密語來保護你的私鑰.\n" "\n" msgid "" "Please enter a passphrase to protect the off-card backup of the new " "encryption key." msgstr "請輸入密語以保護新加密金鑰的卡片外備份." #, c-format msgid "%s.\n" msgstr "%s.\n" msgid "" "You don't want a passphrase - this is probably a *bad* idea!\n" "I will do it anyway. You can change your passphrase at any time,\n" "using this program with the option \"--edit-key\".\n" "\n" msgstr "" "你不想要有密語 - 這個想法實在是 **遭透了**!\n" "我仍然會照你想的去做. 你任何時候都可以變更你的密語,\n" "僅需要再次執行這個程式, 並且使用 \"--edit-key\" 選項即可.\n" "\n" msgid "" "We need to generate a lot of random bytes. It is a good idea to perform\n" "some other action (type on the keyboard, move the mouse, utilize the\n" "disks) during the prime generation; this gives the random number\n" "generator a better chance to gain enough entropy.\n" msgstr "" "我們需要產生大量的隨機位元組. 這個時候你可以多做一些事情\n" "(像是敲打鍵盤, 移動滑鼠, 讀寫硬碟之類的)\n" "這會讓隨機數字產生器有更多的機會獲得夠多的亂數.\n" msgid "Key generation canceled.\n" msgstr "金鑰產生已取消.\n" #, c-format msgid "writing public key to `%s'\n" msgstr "正在寫入公鑰至 `%s'\n" #, c-format msgid "writing secret key stub to `%s'\n" msgstr "正在寫入私鑰 stub 至 `%s'\n" #, c-format msgid "writing secret key to `%s'\n" msgstr "正在寫入私鑰至 `%s'\n" #, c-format msgid "no writable public keyring found: %s\n" msgstr "找不到可寫入的公鑰鑰匙圈: %s\n" #, c-format msgid "no writable secret keyring found: %s\n" msgstr "找不到可寫入的私鑰鑰匙圈: %s\n" #, c-format msgid "error writing public keyring `%s': %s\n" msgstr "寫入公鑰鑰匙圈 `%s' 時出錯: %s\n" #, c-format msgid "error writing secret keyring `%s': %s\n" msgstr "寫入私鑰鑰匙圈 `%s' 時出錯: %s\n" msgid "public and secret key created and signed.\n" msgstr "公鑰和私鑰已建立及簽署.\n" msgid "" "Note that this key cannot be used for encryption. You may want to use\n" "the command \"--edit-key\" to generate a subkey for this purpose.\n" msgstr "" "請注意這把金鑰不能用於加密. 也許你會想藉由 \"--edit-key\" 指令\n" "來產生加密用的子鑰.\n" #, c-format msgid "Key generation failed: %s\n" msgstr "產生金鑰失敗: %s\n" #, c-format msgid "" "key has been created %lu second in future (time warp or clock problem)\n" msgstr "金鑰已經在 %lu 秒後的未來製妥 (可能是因為時光旅行或時鐘的問題)\n" #, c-format msgid "" "key has been created %lu seconds in future (time warp or clock problem)\n" msgstr "金鑰已經在 %lu 秒後的未來製妥 (可能是因為時光旅行或時鐘的問題)\n" msgid "NOTE: creating subkeys for v3 keys is not OpenPGP compliant\n" msgstr "請注意: 對 v3 金鑰製造子鑰會失去 OpenPGP 相容性\n" msgid "Really create? (y/N) " msgstr "真的要建立嗎? (y/N) " #, c-format msgid "storing key onto card failed: %s\n" msgstr "儲存金鑰到卡片上時失敗: %s\n" #, c-format msgid "can't create backup file `%s': %s\n" msgstr "無法建立備份檔案 `%s': %s\n" #, c-format msgid "NOTE: backup of card key saved to `%s'\n" msgstr "請注意: 卡片金鑰的備份已儲存至 `%s'\n" msgid "never " msgstr "永遠不過期" msgid "Critical signature policy: " msgstr "關鍵簽章原則: " msgid "Signature policy: " msgstr "簽章原則: " msgid "Critical preferred keyserver: " msgstr "執意偏好的金鑰伺服器: " msgid "Critical signature notation: " msgstr "關鍵簽章註記: " msgid "Signature notation: " msgstr "簽章註記: " msgid "Keyring" msgstr "鑰匙圈" msgid "Primary key fingerprint:" msgstr " 主鑰指紋:" msgid " Subkey fingerprint:" msgstr " 子鑰指紋:" #. TRANSLATORS: this should fit into 24 bytes to that the #. * fingerprint data is properly aligned with the user ID msgid " Primary key fingerprint:" msgstr " 主鑰指紋:" msgid " Subkey fingerprint:" msgstr " 子鑰指紋:" # use tty msgid " Key fingerprint =" msgstr " 金鑰指紋 =" msgid " Card serial no. =" msgstr " 卡片序號 =" #, c-format msgid "renaming `%s' to `%s' failed: %s\n" msgstr "把 `%s' 重新新命成 `%s' 時失敗: %s\n" msgid "WARNING: 2 files with confidential information exists.\n" msgstr "警告: 2 個檔案存在有互相矛盾的資訊.\n" #, c-format msgid "%s is the unchanged one\n" msgstr "%s 是沒有改變的那一個\n" #, c-format msgid "%s is the new one\n" msgstr "%s 是新的那一個\n" msgid "Please fix this possible security flaw\n" msgstr "請修補這個可能的安全漏洞\n" #, c-format msgid "caching keyring `%s'\n" msgstr "快取鑰匙圈 `%s' 中\n" #, c-format msgid "%lu keys cached so far (%lu signatures)\n" msgstr "目前已檢查 %lu 把金鑰 (共 %lu 份簽章)\n" #, c-format msgid "%lu keys cached (%lu signatures)\n" msgstr "已檢查 %lu 把金鑰 (共 %lu 份簽章)\n" #, c-format msgid "%s: keyring created\n" msgstr "%s: 鑰匙圈已建立\n" msgid "include revoked keys in search results" msgstr "在搜尋結果中也包含已撤銷的金鑰" msgid "include subkeys when searching by key ID" msgstr "以金鑰 ID 搜尋時也搜尋子鑰" msgid "use temporary files to pass data to keyserver helpers" msgstr "用暫存檔來將資料遞送給金鑰伺服器協助程式" msgid "do not delete temporary files after using them" msgstr "使用暫存檔後不要加以刪除" msgid "automatically retrieve keys when verifying signatures" msgstr "驗證簽章時自動取回金鑰" msgid "honor the preferred keyserver URL set on the key" msgstr "尊重金鑰上所設定的偏好金鑰伺服器 URL" msgid "honor the PKA record set on a key when retrieving keys" msgstr "取回金鑰時尊重金鑰所設定的 PKA 記錄" #, c-format msgid "WARNING: keyserver option `%s' is not used on this platform\n" msgstr "警告: 金鑰伺服器選項 `%s' 並未用於此平台\n" msgid "disabled" msgstr "已停用" msgid "Enter number(s), N)ext, or Q)uit > " msgstr "請輸入數字, N)下一頁, 或 Q)離開 > " #, c-format msgid "invalid keyserver protocol (us %d!=handler %d)\n" msgstr "無效的金鑰伺服器協定 (我們用 %d!=經手程式 %d)\n" #, c-format msgid "key \"%s\" not found on keyserver\n" msgstr "在金鑰伺服器上找不到金鑰 \"%s\"\n" msgid "key not found on keyserver\n" msgstr "在金鑰伺服器上找不到金鑰\n" #, c-format msgid "requesting key %s from %s server %s\n" msgstr "正在請求金鑰 %s 自 %s 伺服器 %s\n" #, c-format msgid "requesting key %s from %s\n" msgstr "正在請求金鑰 %s 自 %s\n" #, c-format msgid "searching for names from %s server %s\n" msgstr "正在從 %s 伺服器 %s 搜尋名字\n" #, c-format msgid "searching for names from %s\n" msgstr "正在從 %s 搜尋名字\n" #, c-format msgid "sending key %s to %s server %s\n" msgstr "遞送金鑰 %s 至 %s 伺服器 %s\n" #, c-format msgid "sending key %s to %s\n" msgstr "遞送金鑰 %s 至 %s\n" #, c-format msgid "searching for \"%s\" from %s server %s\n" msgstr "正在搜尋 \"%s\" 於 %s 伺服器 %s\n" #, c-format msgid "searching for \"%s\" from %s\n" msgstr "正在搜尋 \"%s\" 於 %s\n" msgid "no keyserver action!\n" msgstr "沒有金鑰伺服器動作!\n" #, c-format msgid "WARNING: keyserver handler from a different version of GnuPG (%s)\n" msgstr "警告: 金鑰伺服器經手程式係來自不同版本的 GnuPG (%s)\n" msgid "keyserver did not send VERSION\n" msgstr "金鑰伺服器並未送出版本 (VERSION)\n" msgid "no keyserver known (use option --keyserver)\n" msgstr "沒有已知的金鑰伺服器 (使用 --keyserver 選項)\n" msgid "external keyserver calls are not supported in this build\n" msgstr "本版並不支援外部金鑰伺服器叫用\n" #, c-format msgid "no handler for keyserver scheme `%s'\n" msgstr "沒有 `%s' 金鑰伺服器架構的經手程式\n" #, c-format msgid "action `%s' not supported with keyserver scheme `%s'\n" msgstr "`%s' 動作在 `%s' 金鑰伺服器架構中未支援\n" #, c-format msgid "%s does not support handler version %d\n" msgstr "%s 並不支援第 %d 版經手程式\n" msgid "keyserver timed out\n" msgstr "金鑰伺服器逾時\n" msgid "keyserver internal error\n" msgstr "金鑰伺服器內部錯誤\n" #, c-format msgid "keyserver communications error: %s\n" msgstr "金鑰伺服器通訊錯誤: %s\n" #, c-format msgid "\"%s\" not a key ID: skipping\n" msgstr "\"%s\" 並非金鑰 ID: 跳過中\n" #, c-format msgid "WARNING: unable to refresh key %s via %s: %s\n" msgstr "警告: 無法更新金鑰 %s 於 %s: %s\n" #, c-format msgid "refreshing 1 key from %s\n" msgstr "更新 1 份金鑰中 (從 %s )\n" #, c-format msgid "refreshing %d keys from %s\n" msgstr "更新 %d 份金鑰中 (從 %s )\n" #, c-format msgid "WARNING: unable to fetch URI %s: %s\n" msgstr "警告: 無法抓取 URI %s: %s\n" #, c-format msgid "WARNING: unable to parse URI %s\n" msgstr "警告: 無法剖析 URI %s\n" #, c-format msgid "weird size for an encrypted session key (%d)\n" msgstr "加密過的階段金鑰 (%d) 尺寸詭異\n" #, c-format msgid "%s encrypted session key\n" msgstr "%s 加密過的階段金鑰\n" #, c-format msgid "passphrase generated with unknown digest algorithm %d\n" msgstr "密語係以未知的 %d 摘要演算法所產生\n" #, c-format msgid "public key is %s\n" msgstr "公鑰為 %s\n" msgid "public key encrypted data: good DEK\n" msgstr "公鑰加密過的資料: 完好的 DEK\n" #, c-format msgid "encrypted with %u-bit %s key, ID %s, created %s\n" msgstr "已用 %u 位元長的 %s 金鑰, ID %s, 建立於 %s 所加密\n" #, c-format msgid " \"%s\"\n" msgstr " \"%s\"\n" #, c-format msgid "encrypted with %s key, ID %s\n" msgstr "已用 %s 金鑰, ID %s 所加密\n" #, c-format msgid "public key decryption failed: %s\n" msgstr "公鑰解密失敗: %s\n" #, c-format msgid "encrypted with %lu passphrases\n" msgstr "已用 %lu 個密語加密了\n" msgid "encrypted with 1 passphrase\n" msgstr "已用 1 個密語加密了\n" #, c-format msgid "assuming %s encrypted data\n" msgstr "假定 %s 為加密過的資料\n" #, c-format msgid "IDEA cipher unavailable, optimistically attempting to use %s instead\n" msgstr "IDEA 編密法不可用, 我們樂觀地試著改以 %s 代替\n" msgid "decryption okay\n" msgstr "解密成功\n" msgid "WARNING: message was not integrity protected\n" msgstr "警告: 訊息未受到完整的保護\n" msgid "WARNING: encrypted message has been manipulated!\n" msgstr "警告: 加密過的訊息已經被變造了!\n" #, c-format msgid "cleared passphrase cached with ID: %s\n" msgstr "清除此 ID 被快取住的密語: %s\n" #, c-format msgid "decryption failed: %s\n" msgstr "解密失敗: %s\n" msgid "NOTE: sender requested \"for-your-eyes-only\"\n" msgstr "請注意: 寄件者要求了 \"你應該祇用眼睛看\"\n" #, c-format msgid "original file name='%.*s'\n" msgstr "原始的檔名 ='%.*s'\n" msgid "WARNING: multiple plaintexts seen\n" msgstr "警告: 看到了多份明文\n" msgid "standalone revocation - use \"gpg --import\" to apply\n" msgstr "獨立撤銷 - 請用 \"gpg --import\" 來套用\n" msgid "no signature found\n" msgstr "找不到簽章\n" msgid "signature verification suppressed\n" msgstr "簽章驗證已抑制\n" msgid "can't handle this ambiguous signature data\n" msgstr "無法處理這個不明確的簽章資料\n" #, c-format msgid "Signature made %s\n" msgstr "由 %s 建立的簽章\n" #, c-format msgid " using %s key %s\n" msgstr " 使用 %s 金鑰 %s\n" #, c-format msgid "Signature made %s using %s key ID %s\n" msgstr "由 %s 建立的簽章, 使用 %s 金鑰 ID %s\n" msgid "Key available at: " msgstr "可用的金鑰於: " #, c-format msgid "BAD signature from \"%s\"" msgstr "*損壞* 的簽章來自於 \"%s\"" #, c-format msgid "Expired signature from \"%s\"" msgstr "過期的簽章來自於 \"%s\"" #, c-format msgid "Good signature from \"%s\"" msgstr "完好的簽章來自於 \"%s\"" msgid "[uncertain]" msgstr "[ 不確定 ]" #, c-format msgid " aka \"%s\"" msgstr " 亦即 \"%s\"" #, c-format msgid "Signature expired %s\n" msgstr "這份簽署已經在 %s 過期了\n" #, c-format msgid "Signature expires %s\n" msgstr "這份簽署將在 %s 到期\n" #, c-format msgid "%s signature, digest algorithm %s\n" msgstr "%s 簽章, 摘要演算法 %s\n" msgid "binary" msgstr "二進制" msgid "textmode" msgstr "文字模式" msgid "unknown" msgstr "未知" #, c-format msgid "WARNING: not a detached signature; file '%s' was NOT verified!\n" msgstr "警告: 並非分離簽章; '%s' 檔案 *沒有* 通過驗證!\n" #, c-format msgid "Can't check signature: %s\n" msgstr "無法檢查簽章: %s\n" msgid "not a detached signature\n" msgstr "不是一份分離的簽章\n" msgid "" "WARNING: multiple signatures detected. Only the first will be checked.\n" msgstr "警告: 偵測到多重簽章. 祇有第一個簽章纔會被核選.\n" #, c-format msgid "standalone signature of class 0x%02x\n" msgstr "等級 0x%02x 的獨立簽章\n" msgid "old style (PGP 2.x) signature\n" msgstr "舊型 (PGP 2.x) 簽章\n" msgid "invalid root packet detected in proc_tree()\n" msgstr "在 proc_tree() 中偵測到無效的 root 封包\n" #, c-format msgid "fstat of `%s' failed in %s: %s\n" msgstr "`%s' 的 fstat 失敗於 %s: %s\n" #, c-format msgid "fstat(%d) failed in %s: %s\n" msgstr "fstat(%d) 失敗於 %s: %s\n" #, c-format msgid "WARNING: using experimental public key algorithm %s\n" msgstr "警告: 正在使用實驗性的 %s 公鑰演算法\n" msgid "WARNING: Elgamal sign+encrypt keys are deprecated\n" msgstr "警告: 已不建議使用 Elgamal 簽署暨加密金鑰\n" #, c-format msgid "WARNING: using experimental cipher algorithm %s\n" msgstr "警告: 正在使用實驗性的 %s 編密演算法\n" #, c-format msgid "WARNING: using experimental digest algorithm %s\n" msgstr "警告: 正在使用實驗性的 %s 摘要演算法\n" #, c-format msgid "WARNING: digest algorithm %s is deprecated\n" msgstr "警告: 已不建議使用 %s 摘要演算法\n" #, c-format msgid "Note: signatures using the %s algorithm are rejected\n" msgstr "注意: 採用 %s 演算法的簽章已駁回\n" msgid "the IDEA cipher plugin is not present\n" msgstr "IDEA 編密法外掛模組不存在\n" #, c-format msgid "please see %s for more information\n" msgstr "請參考 %s 上進一步的資訊\n" #, c-format msgid "%s:%d: deprecated option \"%s\"\n" msgstr "%s:%d: 不建議使用的選項 \"%s\"\n" #, c-format msgid "WARNING: \"%s\" is a deprecated option\n" msgstr "警告: 已不建議使用 \"%s\" 選項\n" #, c-format msgid "please use \"%s%s\" instead\n" msgstr "請改以 \"%s%s\" 代替\n" #, c-format msgid "WARNING: \"%s\" is a deprecated command - do not use it\n" msgstr "警告: \"%s\" 是個棄而不顧的指令 - 別再用了\n" #, c-format msgid "%s:%u: obsolete option \"%s\" - it has no effect\n" msgstr "%s:%u: 廢棄的 \"%s\" 選項 - 沒有任何影響\n" #, c-format msgid "WARNING: \"%s\" is an obsolete option - it has no effect\n" msgstr "警告: \"%s\" 是已廢棄的選項 - 沒有效果\n" #, c-format +#| msgid "%s:%u: obsolete option \"%s\" - it has no effect\n" msgid "%s:%u: \"%s%s\" is obsolete in this file - it only has effect in %s\n" msgstr "%s:%u: \"%s%s\" 在此檔案中已廢棄 - 僅對 %s 造成影響\n" #, c-format +#| msgid "WARNING: \"%s\" is an obsolete option - it has no effect\n" msgid "" "WARNING: \"%s%s\" is an obsolete option - it has no effect except on %s\n" msgstr "警告: \"%s%s\" 是已廢棄的選項 - 除了對 %s 之外沒有效果\n" msgid "Uncompressed" msgstr "未壓縮" #. TRANSLATORS: See doc/TRANSLATE about this string. msgid "uncompressed|none" msgstr "uncompressed|none|未壓縮|無" #, c-format msgid "this message may not be usable by %s\n" msgstr "這個訊息對 %s 來說無法使用\n" #, c-format msgid "ambiguous option `%s'\n" msgstr "不明確的 `%s' 選項\n" #, c-format msgid "unknown option `%s'\n" msgstr "未知的 `%s' 選項\n" #, c-format msgid "File `%s' exists. " msgstr "檔案 `%s' 已存在. " msgid "Overwrite? (y/N) " msgstr "是否覆寫? (y/N) " #, c-format msgid "%s: unknown suffix\n" msgstr "%s: 未知的副檔名\n" msgid "Enter new filename" msgstr "請輸入新的檔名" msgid "writing to stdout\n" msgstr "寫到標準輸出中\n" #, c-format +#| msgid "assuming signed data in `%s'\n" msgid "assuming signed data in '%s'\n" msgstr "假設被簽署的資料在 '%s'\n" #, c-format msgid "new configuration file `%s' created\n" msgstr "新的設定檔 `%s' 被建立了\n" #, c-format msgid "WARNING: options in `%s' are not yet active during this run\n" msgstr "警告: 在 `%s' 裡的選項於這次執行期間並沒有被啟用\n" #, c-format msgid "can't handle public key algorithm %d\n" msgstr "無法操作 %d 公開金鑰演算法\n" msgid "WARNING: potentially insecure symmetrically encrypted session key\n" msgstr "警告: 可能並不安全的對稱式加密階段金鑰\n" #, c-format msgid "subpacket of type %d has critical bit set\n" msgstr "%d 類別的子封包設定了關鍵位元\n" #, c-format msgid "problem with the agent: %s\n" msgstr "代理程式的問題: %s\n" #, c-format msgid " (main key ID %s)" msgstr " (主要金鑰 ID %s)" #, c-format msgid "" "Please enter the passphrase to unlock the secret key for the OpenPGP " "certificate:\n" "\"%.*s\"\n" "%u-bit %s key, ID %s,\n" "created %s%s.\n" msgstr "" "請輸入密語來解開 OpenPGP 憑證所需的私鑰:\n" "\"%.*s\"\n" "%u 位元長的 %s 金鑰, ID %s,\n" "建立於 %s%s.\n" msgid "Enter passphrase\n" msgstr "請輸入密語\n" msgid "cancelled by user\n" msgstr "由使用者所取消\n" #, c-format msgid "" "You need a passphrase to unlock the secret key for\n" "user: \"%s\"\n" msgstr "" "你需要用密語來解開下列使用者的\n" "私鑰: \"%s\"\n" #, c-format msgid "%u-bit %s key, ID %s, created %s" msgstr "%u 位元長的 %s 金鑰, ID %s, 建立於 %s" #, c-format msgid " (subkey on main key ID %s)" msgstr " (在主鑰 ID %s 上的子鑰)" msgid "" "\n" "Pick an image to use for your photo ID. The image must be a JPEG file.\n" "Remember that the image is stored within your public key. If you use a\n" "very large picture, your key will become very large as well!\n" "Keeping the image close to 240x288 is a good size to use.\n" msgstr "" "\n" "請挑選一張圖片來當成你的照片 ID. 這張圖片一定要是 JPEG 圖檔纔行.\n" "請記住這張圖片會被存放在你的公鑰裡. 如果你挑了非常大的圖片的話,\n" "你的金鑰也會變成非常地大!\n" "盡量把圖片尺寸控制在 240x288 左右, 會是個非常理想的大小.\n" msgid "Enter JPEG filename for photo ID: " msgstr "輸入要當作照片 ID 的 JPEG 檔名: " #, c-format msgid "unable to open JPEG file `%s': %s\n" msgstr "無法開啟 JPEG 圖檔 `%s': %s\n" #, c-format msgid "This JPEG is really large (%d bytes) !\n" msgstr "這個 JPEG 檔案真的很大 (%d 位元組) !\n" msgid "Are you sure you want to use it? (y/N) " msgstr "你確定要用它嗎? (y/N) " #, c-format msgid "`%s' is not a JPEG file\n" msgstr "`%s' 不是一個 JPEG 圖檔\n" msgid "Is this photo correct (y/N/q)? " msgstr "這張照片正確嗎? (y/N/q) " msgid "unable to display photo ID!\n" msgstr "無法顯示照片 ID!\n" msgid "No reason specified" msgstr "未指定原因" msgid "Key is superseded" msgstr "金鑰被代換了" msgid "Key has been compromised" msgstr "金鑰已經被洩漏了" msgid "Key is no longer used" msgstr "金鑰不再被使用了" msgid "User ID is no longer valid" msgstr "使用者 ID 不再有效了" msgid "reason for revocation: " msgstr "撤銷原因: " msgid "revocation comment: " msgstr "撤銷註釋: " # a string with valid answers #. TRANSLATORS: These are the allowed answers in lower and #. uppercase. Below you will find the matching strings which #. should be translated accordingly and the letter changed to #. match the one in the answer string. #. #. i = please show me more information #. m = back to the main menu #. s = skip this key #. q = quit #. msgid "iImMqQsS" msgstr "iImMqQsS" msgid "No trust value assigned to:\n" msgstr "下列項目沒有對應的信任值:\n" #, c-format msgid " aka \"%s\"\n" msgstr " 亦即 \"%s\"\n" msgid "" "How much do you trust that this key actually belongs to the named user?\n" msgstr "你有多信任這把金鑰真的屬於叫這個名字的使用者?\n" #, c-format msgid " %d = I don't know or won't say\n" msgstr " %d = 我不知道或不想說\n" #, c-format msgid " %d = I do NOT trust\n" msgstr " %d = 我*不*信任\n" #, c-format msgid " %d = I trust ultimately\n" msgstr " %d = 我徹底信任\n" msgid " m = back to the main menu\n" msgstr " m = 回到主選單\n" msgid " s = skip this key\n" msgstr " s = 跳過這把金鑰\n" msgid " q = quit\n" msgstr " q = 離開\n" #, c-format msgid "" "The minimum trust level for this key is: %s\n" "\n" msgstr "" "這把金鑰的最小信任等級為: %s\n" "\n" msgid "Your decision? " msgstr "你的決定是甚麼? " msgid "Do you really want to set this key to ultimate trust? (y/N) " msgstr "請問你是否真的想把這把金鑰設成徹底信任呢? (y/N) " msgid "Certificates leading to an ultimately trusted key:\n" msgstr "被徹底信任金鑰的憑證:\n" #, c-format msgid "%s: There is no assurance this key belongs to the named user\n" msgstr "%s: 沒法保證這把金鑰真的屬於叫這個名字的使用者\n" #, c-format msgid "%s: There is limited assurance this key belongs to the named user\n" msgstr "%s: 祇能有限的保證這把金鑰真的屬於叫這個名字的使用者\n" msgid "This key probably belongs to the named user\n" msgstr "這把金鑰很可能屬於叫這個名字的使用者\n" msgid "This key belongs to us\n" msgstr "這把金鑰是屬於我們自己的\n" msgid "" "It is NOT certain that the key belongs to the person named\n" "in the user ID. If you *really* know what you are doing,\n" "you may answer the next question with yes.\n" msgstr "" "這把金鑰並 *不* 確定屬於使用者 ID 裡的那個人.\n" "除非你 **真的** 知道自己在做甚麼,\n" "否則你最好在下一個問題回答 no\n" msgid "Use this key anyway? (y/N) " msgstr "無論如何還是使用這把金鑰嗎? (y/N) " msgid "WARNING: Using untrusted key!\n" msgstr "警告: 正在使用不被信任的金鑰!\n" msgid "WARNING: this key might be revoked (revocation key not present)\n" msgstr "警告: 這把金鑰可能已撤銷 (撤銷金鑰未出現)\n" msgid "WARNING: This key has been revoked by its designated revoker!\n" msgstr "警告: 這把金鑰已被指定撤銷者所撤銷!\n" msgid "WARNING: This key has been revoked by its owner!\n" msgstr "警告: 這把金鑰已被其持有人所撤銷!\n" msgid " This could mean that the signature is forged.\n" msgstr " 這很有可能表示此簽章是偽造的.\n" msgid "WARNING: This subkey has been revoked by its owner!\n" msgstr "警告: 這把子鑰已被其持有人所撤銷!\n" msgid "Note: This key has been disabled.\n" msgstr "請注意: 這把金鑰已停用.\n" #, c-format msgid "Note: Verified signer's address is `%s'\n" msgstr "請注意: 已驗證的簽署者地址為 `%s'\n" #, c-format msgid "Note: Signer's address `%s' does not match DNS entry\n" msgstr "請注意: 簽署者地址 `%s' 與 DNS 項目並不吻合\n" msgid "trustlevel adjusted to FULL due to valid PKA info\n" msgstr "信任等級因有效的 PKA 資訊而調整為 *完全*\n" msgid "trustlevel adjusted to NEVER due to bad PKA info\n" msgstr "信任等級因不良的 PKA 資訊而調整為 *永遠不會*\n" msgid "Note: This key has expired!\n" msgstr "請注意: 這把金鑰已經過期了!\n" msgid "WARNING: This key is not certified with a trusted signature!\n" msgstr "警告: 這把金鑰並非以受信任的簽章所認證!\n" msgid "" " There is no indication that the signature belongs to the owner.\n" msgstr " 沒有證據指出這個簽章屬於這個持有者.\n" msgid "WARNING: We do NOT trust this key!\n" msgstr "警告: 我們 *不* 信任這把金鑰!\n" msgid " The signature is probably a FORGERY.\n" msgstr " 這個簽章很有可能是 *偽造的*.\n" msgid "" "WARNING: This key is not certified with sufficiently trusted signatures!\n" msgstr "警告: 這把金鑰並非以足夠信任的簽章所認證!\n" msgid " It is not certain that the signature belongs to the owner.\n" msgstr " 這份簽章並不屬於這個持有者\n" #, c-format msgid "%s: skipped: %s\n" msgstr "%s: 已跳過: %s\n" #, c-format msgid "%s: skipped: public key already present\n" msgstr "%s: 已跳過: 公鑰已存在\n" msgid "You did not specify a user ID. (you may use \"-r\")\n" msgstr "你沒有指定使用者 ID. (你可能得用 \"-r\")\n" msgid "Current recipients:\n" msgstr "目前的收件者:\n" msgid "" "\n" "Enter the user ID. End with an empty line: " msgstr "" "\n" "請輸入使用者 ID. 以空白列結束: " msgid "No such user ID.\n" msgstr "沒有這個使用者 ID.\n" msgid "skipped: public key already set as default recipient\n" msgstr "已跳過: 公鑰已經被設成預設收件者\n" msgid "Public key is disabled.\n" msgstr "公鑰已停用.\n" msgid "skipped: public key already set\n" msgstr "已跳過: 公鑰已設過\n" #, c-format msgid "unknown default recipient \"%s\"\n" msgstr "未知的預設收件者 \"%s\"\n" #, c-format msgid "%s: skipped: public key is disabled\n" msgstr "%s: 已跳過: 公鑰已停用\n" msgid "no valid addressees\n" msgstr "沒有有效的地址\n" #, c-format msgid "Note: key %s has no %s feature\n" msgstr "請注意: 金鑰 %s 沒有 %s 功能\n" #, c-format msgid "Note: key %s has no preference for %s\n" msgstr "警告: 金鑰 %s 沒有 %s 的偏好設定\n" msgid "data not saved; use option \"--output\" to save it\n" msgstr "資料未被儲存; 請用 \"--output\" 選項來儲存\n" msgid "Detached signature.\n" msgstr "分離的簽章.\n" msgid "Please enter name of data file: " msgstr "請輸入資料檔的名稱: " msgid "reading stdin ...\n" msgstr "正在讀取標準輸入中 ...\n" msgid "no signed data\n" msgstr "沒有被簽署過的資料\n" #, c-format msgid "can't open signed data `%s'\n" msgstr "無法開啟被簽署過的資料 `%s'\n" #, c-format msgid "can't open signed data fd=%d: %s\n" msgstr "無法開啟被簽署過的資料 fd=%d: %s\n" #, c-format msgid "anonymous recipient; trying secret key %s ...\n" msgstr "匿名收件者; 正在嘗試使用私鑰 %s ...\n" msgid "okay, we are the anonymous recipient.\n" msgstr "很好, 我們就是匿名收件者.\n" msgid "old encoding of the DEK is not supported\n" msgstr "不支援舊式的 DEK 編碼\n" #, c-format msgid "cipher algorithm %d%s is unknown or disabled\n" msgstr "%d%s 編密演算法未知或已停用\n" #, c-format msgid "WARNING: cipher algorithm %s not found in recipient preferences\n" msgstr "警告: 收件者偏好設定中找不到 %s 編密演算法\n" #, c-format msgid "NOTE: secret key %s expired at %s\n" msgstr "請注意: 私鑰 %s 在 %s 過期了\n" msgid "NOTE: key has been revoked" msgstr "請注意: 金鑰已撤銷" #, c-format msgid "build_packet failed: %s\n" msgstr "build_packet 失敗: %s\n" #, c-format msgid "key %s has no user IDs\n" msgstr "金鑰 %s 沒有使用者 ID\n" msgid "To be revoked by:\n" msgstr "將被撤銷:\n" msgid "(This is a sensitive revocation key)\n" msgstr "(這是把機密的撤銷金鑰)\n" msgid "Create a designated revocation certificate for this key? (y/N) " msgstr "要為這把金鑰建立一份指定撤銷憑證嗎? (y/N) " msgid "ASCII armored output forced.\n" msgstr "已強迫使用 ASCII 封裝過的輸出.\n" #, c-format msgid "make_keysig_packet failed: %s\n" msgstr "make_keysig_packet 失敗: %s\n" msgid "Revocation certificate created.\n" msgstr "已建立撤銷憑證.\n" #, c-format msgid "no revocation keys found for \"%s\"\n" msgstr "沒有找到 \"%s\" 用的撤銷金鑰\n" #, c-format msgid "secret key \"%s\" not found: %s\n" msgstr "找不到私鑰 \"%s\": %s\n" #, c-format msgid "no corresponding public key: %s\n" msgstr "沒有相對應的公鑰: %s\n" msgid "public key does not match secret key!\n" msgstr "公鑰與私鑰並不吻合!\n" msgid "Create a revocation certificate for this key? (y/N) " msgstr "要為這把金鑰建立一份撤銷憑證嗎? (y/N) " msgid "unknown protection algorithm\n" msgstr "未知的保護演算法\n" msgid "NOTE: This key is not protected!\n" msgstr "請注意: 這把金鑰未受保護!\n" msgid "" "Revocation certificate created.\n" "\n" "Please move it to a medium which you can hide away; if Mallory gets\n" "access to this certificate he can use it to make your key unusable.\n" "It is smart to print this certificate and store it away, just in case\n" "your media become unreadable. But have some caution: The print system of\n" "your machine might store the data and make it available to others!\n" msgstr "" "已建立撤銷憑證.\n" "\n" "請把這個檔案搬移到另一個你能夠將之藏起來的媒介上;\n" "如果有人能夠取得這份憑證的話, 那麼他也能夠讓你的\n" "金鑰無法繼續使用. 把這份憑證列印出來再藏到別的地\n" "方也是很好的方法, 以免你的儲存媒介損毀而無法讀取.\n" "但是千萬小心: 你的機器上的列印系統可能會在列印過\n" "程中把這些資料暫存在某個其他人也能夠看得到的地方!\n" msgid "Please select the reason for the revocation:\n" msgstr "請選擇撤銷的原因:\n" msgid "Cancel" msgstr "取消" #, c-format msgid "(Probably you want to select %d here)\n" msgstr "(也許你會想要在這裡選擇 %d)\n" msgid "Enter an optional description; end it with an empty line:\n" msgstr "請輸入選用的描述; 以空白列結束:\n" #, c-format msgid "Reason for revocation: %s\n" msgstr "撤銷原因: %s\n" msgid "(No description given)\n" msgstr "(沒有給定描述)\n" msgid "Is this okay? (y/N) " msgstr "這樣可以嗎? (y/N) " msgid "secret key parts are not available\n" msgstr "私鑰部分無法取用\n" #, c-format msgid "protection algorithm %d%s is not supported\n" msgstr "%d%s 保護演算法未支援\n" #, c-format msgid "protection digest %d is not supported\n" msgstr "%d 保護摘要未支援\n" msgid "Invalid passphrase; please try again" msgstr "無效的密語; 請再試一次" #, c-format msgid "%s ...\n" msgstr "%s ...\n" msgid "WARNING: Weak key detected - please change passphrase again.\n" msgstr "警告: 偵測到金鑰薄弱 - 請再更換一次密語.\n" msgid "generating the deprecated 16-bit checksum for secret key protection\n" msgstr "正在產生私鑰保護會用到的舊式 16 位元加總檢查\n" msgid "weak key created - retrying\n" msgstr "建立了弱金鑰 - 重試中\n" #, c-format msgid "cannot avoid weak key for symmetric cipher; tried %d times!\n" msgstr "無法避免對稱式編密法的弱金鑰; 已經試了 %d 次了!\n" msgid "DSA requires the hash length to be a multiple of 8 bits\n" msgstr "DSA 需要 8 位元倍數的雜湊長度\n" #, c-format msgid "DSA key %s uses an unsafe (%u bit) hash\n" msgstr "DSA 金鑰 %s 使用不安全 (%u 位元) 的雜湊\n" #, c-format msgid "DSA key %s requires a %u bit or larger hash\n" msgstr "DSA 金鑰 %s 需要 %u 位元以上的雜湊\n" msgid "WARNING: signature digest conflict in message\n" msgstr "警告: 簽章摘要與訊息不一致\n" #, c-format msgid "WARNING: signing subkey %s is not cross-certified\n" msgstr "警告: 簽署子鑰 %s 未經交叉認證\n" #, c-format msgid "WARNING: signing subkey %s has an invalid cross-certification\n" msgstr "警告: 簽署子鑰 %s 有無效的交叉憑證\n" #, c-format msgid "public key %s is %lu second newer than the signature\n" msgstr "公鑰 %s 比簽章還要新了 %lu 秒\n" #, c-format msgid "public key %s is %lu seconds newer than the signature\n" msgstr "公鑰 %s 比簽章還要新了 %lu 秒\n" #, c-format msgid "" "key %s was created %lu second in the future (time warp or clock problem)\n" msgstr "金鑰 %s 已經在 %lu 秒後的未來製妥 (可能是因為時光旅行或時鐘的問題)\n" #, c-format msgid "" "key %s was created %lu seconds in the future (time warp or clock problem)\n" msgstr "金鑰 %s 已經在 %lu 秒後的未來製妥 (可能是因為時光旅行或時鐘的問題)\n" #, c-format msgid "NOTE: signature key %s expired %s\n" msgstr "請注意: 簽章金鑰 %s 已於 %s 過期\n" #, c-format msgid "NOTE: signature key %s has been revoked\n" msgstr "請注意: 簽署金鑰 %s 已撤銷\n" #, c-format msgid "assuming bad signature from key %s due to an unknown critical bit\n" msgstr "假設金鑰 %s 的損壞簽章導因於某個未知的關鍵位元\n" #, c-format msgid "key %s: no subkey for subkey revocation signature\n" msgstr "金鑰 %s: 沒有子鑰可供子鑰撤銷簽章使用\n" #, c-format msgid "key %s: no subkey for subkey binding signature\n" msgstr "金鑰 %s: 沒有子鑰可供附子鑰簽章之用\n" #, c-format msgid "WARNING: unable to %%-expand notation (too large). Using unexpanded.\n" msgstr "警告: 註記 %% 無法擴張 (太大了). 現在使用未擴張的.\n" #, c-format msgid "" "WARNING: unable to %%-expand policy URL (too large). Using unexpanded.\n" msgstr "警告: 原則 URL 的 %% 無法擴張 (太大了). 現在使用未擴張的.\n" #, c-format msgid "" "WARNING: unable to %%-expand preferred keyserver URL (too large). Using " "unexpanded.\n" msgstr "警告: 偏好金鑰伺服器 URL 的 %% 無法擴張 (太大了). 現在使用未擴張的.\n" #, c-format msgid "checking created signature failed: %s\n" msgstr "檢查已建立的簽章時出錯: %s\n" #, c-format msgid "%s/%s signature from: \"%s\"\n" msgstr "%s/%s 簽章來自: \"%s\"\n" msgid "you can only detach-sign with PGP 2.x style keys while in --pgp2 mode\n" msgstr "你在 --pgp2 模式下祇能夠使用 PGP 2.x 型態的金鑰來做分離簽署\n" #, c-format msgid "" "WARNING: forcing digest algorithm %s (%d) violates recipient preferences\n" msgstr "警告: 強迫使用 %s (%d) 摘要演算法會違反收件者偏好設定\n" msgid "signing:" msgstr "簽署:" msgid "you can only clearsign with PGP 2.x style keys while in --pgp2 mode\n" msgstr "你在 --pgp2 模式下祇能夠使用 PGP 2.x 型態的金鑰來做明文簽署\n" #, c-format msgid "%s encryption will be used\n" msgstr "%s 加密將被採用\n" msgid "key is not flagged as insecure - can't use it with the faked RNG!\n" msgstr "金鑰未被標示為不安全 - 不能夠拿來跟假的隨機數字產生器併用!\n" #, c-format msgid "skipped \"%s\": duplicated\n" msgstr "已跳過 \"%s\": 重複了\n" #, c-format msgid "skipped \"%s\": %s\n" msgstr "已跳過 \"%s\": %s\n" msgid "skipped: secret key already present\n" msgstr "已跳過: 私鑰已經存在\n" msgid "this is a PGP generated Elgamal key which is not secure for signatures!" msgstr "這是由 PGP 產生的 ElGamal 金鑰, 用於簽章並不安全!" #, c-format msgid "trust record %lu, type %d: write failed: %s\n" msgstr "信任記錄 %lu, 類別 %d: 寫入失敗: %s\n" #, c-format msgid "" "# List of assigned trustvalues, created %s\n" "# (Use \"gpg --import-ownertrust\" to restore them)\n" msgstr "" "# 相對應的信任值清單被建立於 %s\n" "# (請用 \"gpg --import-ownertrust\" 來取回它們)\n" #, c-format msgid "error in `%s': %s\n" msgstr "在 `%s' 中出錯: %s\n" msgid "line too long" msgstr "列太長" msgid "colon missing" msgstr "冒號缺漏" msgid "invalid fingerprint" msgstr "無效的指紋" msgid "ownertrust value missing" msgstr "主觀信任值缺漏" #, c-format msgid "error finding trust record in `%s': %s\n" msgstr "在 `%s' 中尋找信任記錄時出錯: %s\n" #, c-format msgid "read error in `%s': %s\n" msgstr "讀取 `%s' 錯誤: %s\n" #, c-format msgid "trustdb: sync failed: %s\n" msgstr "信任資料庫: 同步化失敗: %s\n" #, c-format msgid "trustdb rec %lu: lseek failed: %s\n" msgstr "信任資料庫記錄 %lu: 本機搜尋失敗: %s\n" #, c-format msgid "trustdb rec %lu: write failed (n=%d): %s\n" msgstr "信任資料庫記錄 %lu: 寫入失敗 (n=%d): %s\n" msgid "trustdb transaction too large\n" msgstr "信任資料庫更動量過大\n" #, c-format msgid "can't access `%s': %s\n" msgstr "無法存取 `%s': %s\n" #, c-format msgid "%s: directory does not exist!\n" msgstr "%s: 目錄不存在!\n" #, c-format msgid "can't create lock for `%s'\n" msgstr "無法為 `%s' 建立鎖定\n" #, c-format msgid "can't lock `%s'\n" msgstr "無法鎖定 `%s'\n" #, c-format msgid "%s: failed to create version record: %s" msgstr "%s: 建立版本記錄失敗: %s" #, c-format msgid "%s: invalid trustdb created\n" msgstr "%s: 建立了無效的信任資料庫\n" #, c-format msgid "%s: trustdb created\n" msgstr "%s: 建立了信任資料庫\n" msgid "NOTE: trustdb not writable\n" msgstr "請注意: 信任資料庫不可寫入\n" #, c-format msgid "%s: invalid trustdb\n" msgstr "%s: 無效的信任資料庫\n" #, c-format msgid "%s: failed to create hashtable: %s\n" msgstr "%s: 建立雜湊表失敗: %s\n" #, c-format msgid "%s: error updating version record: %s\n" msgstr "%s: 更新版本記錄時錯誤: %s\n" #, c-format msgid "%s: error reading version record: %s\n" msgstr "%s: 讀取版本記錄時錯誤: %s\n" #, c-format msgid "%s: error writing version record: %s\n" msgstr "%s: 寫入版本記錄時錯誤: %s\n" #, c-format msgid "trustdb: lseek failed: %s\n" msgstr "信任資料庫: 本機搜尋失敗: %s\n" #, c-format msgid "trustdb: read failed (n=%d): %s\n" msgstr "信任資料庫: 讀取失敗 (n=%d): %s\n" #, c-format msgid "%s: not a trustdb file\n" msgstr "%s: 不是一個信任資料庫檔案\n" #, c-format msgid "%s: version record with recnum %lu\n" msgstr "%s: 記錄編號為 %lu 的版本記錄\n" #, c-format msgid "%s: invalid file version %d\n" msgstr "%s: 無效的檔案版本 %d\n" #, c-format msgid "%s: error reading free record: %s\n" msgstr "%s: 讀取可用空間記錄時出錯: %s\n" #, c-format msgid "%s: error writing dir record: %s\n" msgstr "%s: 寫入目錄記錄時出錯: %s\n" #, c-format msgid "%s: failed to zero a record: %s\n" msgstr "%s: 記錄歸零失敗: %s\n" #, c-format msgid "%s: failed to append a record: %s\n" msgstr "%s: 附加記錄失敗: %s\n" msgid "Error: The trustdb is corrupted.\n" msgstr "錯誤: 信任資料庫已毀損.\n" #, c-format msgid "can't handle text lines longer than %d characters\n" msgstr "無法處理長於 %d 字符的文字列\n" #, c-format msgid "input line longer than %d characters\n" msgstr "輸入列比 %d 字符還長\n" #, c-format msgid "`%s' is not a valid long keyID\n" msgstr "`%s' 不是一個有效的長式金鑰 ID\n" #, c-format msgid "key %s: accepted as trusted key\n" msgstr "金鑰 %s: 如受信任的金鑰般被接受了\n" #, c-format msgid "key %s occurs more than once in the trustdb\n" msgstr "金鑰 %s 在信任資料庫中出現了不止一次\n" #, c-format msgid "key %s: no public key for trusted key - skipped\n" msgstr "金鑰 %s: 受信任的金鑰沒有公鑰 - 已跳過\n" #, c-format msgid "key %s marked as ultimately trusted\n" msgstr "金鑰 %s 已標記成徹底信任了\n" #, c-format msgid "trust record %lu, req type %d: read failed: %s\n" msgstr "信任記錄 %lu, 請求類別 %d: 讀取失敗: %s\n" #, c-format msgid "trust record %lu is not of requested type %d\n" msgstr "信任記錄 %lu 不是所請求的類別 %d\n" msgid "You may try to re-create the trustdb using the commands:\n" msgstr "你可以試著用下列指令來重建信任資料庫:\n" msgid "If that does not work, please consult the manual\n" msgstr "如果行不通的話, 請查閱手冊\n" #, c-format msgid "unable to use unknown trust model (%d) - assuming %s trust model\n" msgstr "無法使用未知的信任模型 (%d) - 現在採用 %s 信任模型\n" #, c-format msgid "using %s trust model\n" msgstr "正在使用 %s 信任模型\n" #. TRANSLATORS: these strings are similar to those in #. trust_value_to_string(), but are a fixed length. This is needed to #. make attractive information listings where columns line up #. properly. The value "10" should be the length of the strings you #. choose to translate to. This is the length in printable columns. #. It gets passed to atoi() so everything after the number is #. essentially a comment and need not be translated. Either key and #. uid are both NULL, or neither are NULL. msgid "10 translator see trustdb.c:uid_trust_string_fixed" msgstr "10 譯者請參見 trustdb.c:uid_trust_string_fixed" msgid "[ revoked]" msgstr "[ 已撤銷 ]" msgid "[ expired]" msgstr "[ 已過期 ]" msgid "[ unknown]" msgstr "[ 未知 ]" msgid "[ undef ]" msgstr "[ 未定義 ]" msgid "[marginal]" msgstr "[ 勉強 ]" msgid "[ full ]" msgstr "[ 完全 ]" msgid "[ultimate]" msgstr "[ 徹底 ]" msgid "undefined" msgstr "未定義" msgid "never" msgstr "永遠不會" msgid "marginal" msgstr "勉強" msgid "full" msgstr "完全" msgid "ultimate" msgstr "徹底" msgid "no need for a trustdb check\n" msgstr "不需要檢查信任資料庫\n" #, c-format msgid "next trustdb check due at %s\n" msgstr "下次信任資料庫檢查將於 %s 進行\n" #, c-format msgid "no need for a trustdb check with `%s' trust model\n" msgstr "在 `%s' 信任模型中並不需要檢查信任資料庫\n" #, c-format msgid "no need for a trustdb update with `%s' trust model\n" msgstr "在 `%s' 信任模型中並不需要更新信任資料庫\n" #, c-format msgid "public key %s not found: %s\n" msgstr "找不到公鑰 %s: %s\n" msgid "please do a --check-trustdb\n" msgstr "請做一次 --check-trustdb\n" msgid "checking the trustdb\n" msgstr "正在檢查信任資料庫\n" #, c-format msgid "%d keys processed (%d validity counts cleared)\n" msgstr "已經處理了 %d 把金鑰 (共計已解決了 %d 份有效性)\n" msgid "no ultimately trusted keys found\n" msgstr "沒有找到任何徹底信任的金鑰\n" #, c-format msgid "public key of ultimately trusted key %s not found\n" msgstr "找不到徹底信任金鑰 %s 的公鑰\n" #, c-format msgid "%d marginal(s) needed, %d complete(s) needed, %s trust model\n" msgstr "%d 個勉強信任以及 %d 個完全信任是 %s 信任模型的最小需求\n" #, c-format msgid "" "depth: %d valid: %3d signed: %3d trust: %d-, %dq, %dn, %dm, %df, %du\n" msgstr "深度: %d 有效: %3d 已簽署: %3d 信任: %d-, %dq, %dn, %dm, %df, %du\n" #, c-format msgid "unable to update trustdb version record: write failed: %s\n" msgstr "無法更新信任資料庫版本記錄: 寫入失敗: %s\n" msgid "" "the signature could not be verified.\n" "Please remember that the signature file (.sig or .asc)\n" "should be the first file given on the command line.\n" msgstr "" "簽章無法驗證.\n" "請記住簽章檔 (.sig 或 .asc)\n" "應該是第一個命令列給定的檔案.\n" #, c-format msgid "input line %u too long or missing LF\n" msgstr "輸入列 %u 太長或者列末的 LF 遺失了\n" #, c-format msgid "can't open fd %d: %s\n" msgstr "無法開啟 fd %d: %s\n" msgid "argument not expected" msgstr "沒料到有引數" msgid "read error" msgstr "讀取錯誤" msgid "keyword too long" msgstr "關鍵字太長" msgid "missing argument" msgstr "無效的引數" msgid "invalid command" msgstr "無效的指令" msgid "invalid alias definition" msgstr "無效的別名定義" msgid "out of core" msgstr "超出核心" msgid "invalid option" msgstr "無效的選項" #, c-format msgid "missing argument for option \"%.50s\"\n" msgstr "\"%.50s\" 選項遺失了引數\n" #, c-format msgid "option \"%.50s\" does not expect an argument\n" msgstr "\"%.50s\" 選項沒料到會有引數\n" #, c-format msgid "invalid command \"%.50s\"\n" msgstr "無效的指令 \"%.50s\"\n" #, c-format msgid "option \"%.50s\" is ambiguous\n" msgstr "\"%.50s\" 選項不明確\n" #, c-format msgid "command \"%.50s\" is ambiguous\n" msgstr "\"%.50s\" 指令不明確\n" msgid "out of core\n" msgstr "超出核心\n" #, c-format msgid "invalid option \"%.50s\"\n" msgstr "無效的選項 \"%.50s\"\n" #, c-format msgid "you found a bug ... (%s:%d)\n" msgstr "你找到一個瑕疵了 ... (%s:%d)\n" #, c-format msgid "conversion from `%s' to `%s' not available\n" msgstr "沒有從 `%s' 到 `%s' 之間的轉換可用\n" #, c-format msgid "iconv_open failed: %s\n" msgstr "iconv_open 失敗: %s\n" #, c-format msgid "conversion from `%s' to `%s' failed: %s\n" msgstr "從 `%s' 轉換成 `%s' 失敗: %s\n" #, c-format msgid "failed to create temporary file `%s': %s\n" msgstr "無法建立暫存檔 `%s': %s\n" #, c-format msgid "error writing to `%s': %s\n" msgstr "寫入 %s 時出錯: %s\n" #, c-format msgid "removing stale lockfile (created by %d)\n" msgstr "正在移除陳腐的鎖定檔 (由 %d 所建立)\n" msgid " - probably dead - removing lock" msgstr " - 可能已經掛掉了 - 正在移除鎖定" #, c-format msgid "waiting for lock (held by %d%s) %s...\n" msgstr "正在等候鎖定 (被 %d%s 持有) %s...\n" msgid "(deadlock?) " msgstr "(死結嗎?) " #, c-format msgid "lock `%s' not made: %s\n" msgstr "未鎖定 `%s': %s\n" #, c-format msgid "waiting for lock %s...\n" msgstr "正在等候 `%s' 鎖定...\n" msgid "set debugging flags" msgstr "設定除錯旗標" msgid "enable full debugging" msgstr "啟用完整除錯" msgid "Usage: kbxutil [options] [files] (-h for help)" msgstr "用法: kbxutil [選項] [檔案] (或用 -h 求助)" msgid "" "Syntax: kbxutil [options] [files]\n" "List, export, import Keybox data\n" msgstr "" "語法: kbxutil [選項] [檔案]\n" "列出, 匯出, 匯入金鑰鑰匙盒資料\n" #, c-format msgid "RSA modulus missing or not of size %d bits\n" msgstr "RSA 模組缺漏或者並非 %d 位元大\n" #, c-format msgid "RSA public exponent missing or larger than %d bits\n" msgstr "RSA 公用指數缺漏或者大於 %d 位元\n" #, c-format msgid "PIN callback returned error: %s\n" msgstr "收回個人識別碼 (PIN) 時傳回錯誤: %s\n" msgid "the NullPIN has not yet been changed\n" msgstr "NullPIN 還沒有變更過\n" msgid "|N|Please enter a new PIN for the standard keys." msgstr "|N|請輸入標準金鑰將採用的新個人識別碼 (PIN)." msgid "||Please enter the PIN for the standard keys." msgstr "||請輸入標準金鑰的個人識別碼 (PIN)." msgid "|NP|Please enter a new PIN Unblocking Code (PUK) for the standard keys." msgstr "|NP|請輸入標準金鑰將採用的 PIN 重設碼 (PUK)." msgid "|P|Please enter the PIN Unblocking Code (PUK) for the standard keys." msgstr "|P|請輸入標準金鑰的 PIN 重設碼 (PUK)." msgid "|N|Please enter a new PIN for the key to create qualified signatures." msgstr "|N|請輸入金鑰的新個人識別碼 (PIN) 以建立完善的簽章." msgid "||Please enter the PIN for the key to create qualified signatures." msgstr "||請輸入金鑰的個人識別碼 (PIN) 以建立完善的簽章." msgid "" "|NP|Please enter a new PIN Unblocking Code (PUK) for the key to create " "qualified signatures." msgstr "|NP|請輸入金鑰的新 PIN 重設碼 (PUK) 以建立完善的簽章." msgid "" "|P|Please enter the PIN Unblocking Code (PUK) for the key to create " "qualified signatures." msgstr "|P|請輸入金鑰的 PIN 重設碼 (PUK) 以建立完善的簽章." #, c-format msgid "error getting new PIN: %s\n" msgstr "取得新的個人識別碼 (PIN) 時出錯: %s\n" #, c-format msgid "failed to store the fingerprint: %s\n" msgstr "存放指紋失敗: %s\n" #, c-format msgid "failed to store the creation date: %s\n" msgstr "存放創生日期失敗: %s\n" #, c-format msgid "reading public key failed: %s\n" msgstr "讀取公鑰時失敗: %s\n" msgid "response does not contain the public key data\n" msgstr "回應中未包含公鑰資料\n" msgid "response does not contain the RSA modulus\n" msgstr "回應中未包含 RSA 系數\n" msgid "response does not contain the RSA public exponent\n" msgstr "回應中未包含 RSA 公用指數\n" #, c-format msgid "using default PIN as %s\n" msgstr "以 %s 做為預設 PIN\n" #, c-format msgid "failed to use default PIN as %s: %s - disabling further default use\n" msgstr "使用 %s 做為預設個人識別碼 (PIN) 失敗: %s - 正在停用之後的預設使用\n" #, c-format msgid "||Please enter the PIN%%0A[sigs done: %lu]" msgstr "||請輸入 PIN%%0A[簽署完成: %lu]" msgid "||Please enter the PIN" msgstr "||請輸入個人識別碼 (PIN)" #, c-format msgid "PIN for CHV%d is too short; minimum length is %d\n" msgstr "用於 CHV%d 的個人識別碼 (PIN) 太短; 長度最少要有 %d\n" #, c-format msgid "verify CHV%d failed: %s\n" msgstr "驗證 CHV%d 失敗: %s\n" msgid "error retrieving CHV status from card\n" msgstr "從卡片取回 CHV 狀態時出錯\n" msgid "card is permanently locked!\n" msgstr "卡片永久鎖定了!!\n" #, c-format msgid "%d Admin PIN attempts remaining before card is permanently locked\n" msgstr "%d 管理者個人識別碼 (PIN) 試圖在卡片永久鎖定前遺留下來\n" #. TRANSLATORS: Do not translate the "|A|" prefix but keep it at #. the start of the string. Use %%0A to force a linefeed. #, c-format msgid "|A|Please enter the Admin PIN%%0A[remaining attempts: %d]" msgstr "|A|請在上輸入管理者 PIN%%0A[剩餘嘗試次數: %d]" msgid "|A|Please enter the Admin PIN" msgstr "|A|請輸入管理者 PIN" msgid "access to admin commands is not configured\n" msgstr "管理者指令存取權限尚未組態\n" msgid "||Please enter the Reset Code for the card" msgstr "||請輸入卡片的重設碼" #, c-format msgid "Reset Code is too short; minimum length is %d\n" msgstr "重設碼太短; 長度最少要有 %d\n" #. TRANSLATORS: Do not translate the "|*|" prefixes but #. keep it at the start of the string. We need this elsewhere #. to get some infos on the string. msgid "|RN|New Reset Code" msgstr "|RN|新增重設碼" msgid "|AN|New Admin PIN" msgstr "|AN|新增管理者個人識別碼 (PIN)" msgid "|N|New PIN" msgstr "|N|新增個人識別碼 (PIN)" msgid "||Please enter the Admin PIN and New Admin PIN" msgstr "||請輸入管理者 PIN 及新的管理者 PIN" msgid "||Please enter the PIN and New PIN" msgstr "||請輸入個人識別碼及新的個人識別碼 (PIN)" msgid "error reading application data\n" msgstr "讀取應用程式資料時出錯\n" msgid "error reading fingerprint DO\n" msgstr "讀取指紋 DO 時出錯\n" msgid "key already exists\n" msgstr "金鑰已存在\n" msgid "existing key will be replaced\n" msgstr "既有的金鑰將被取代\n" msgid "generating new key\n" msgstr "正在產生新的金鑰\n" msgid "writing new key\n" msgstr "正在寫入新的金鑰\n" msgid "creation timestamp missing\n" msgstr "缺漏創生時間戳印\n" #, c-format msgid "RSA prime %s missing or not of size %d bits\n" msgstr "RSA 質數 %s 缺漏或者並非 %d 位元大\n" #, c-format msgid "failed to store the key: %s\n" msgstr "存放金鑰失敗: %s\n" msgid "please wait while key is being generated ...\n" msgstr "正在產生金鑰中, 請稍候 ...\n" msgid "generating key failed\n" msgstr "產生金鑰時失敗\n" #, c-format msgid "key generation completed (%d seconds)\n" msgstr "金鑰產生完畢 (%d 秒)\n" msgid "invalid structure of OpenPGP card (DO 0x93)\n" msgstr "無效的 OpenPGP 卡片結構 (DO 0x93)\n" msgid "fingerprint on card does not match requested one\n" msgstr "卡片上的指紋與所要求的那個並不吻合\n" #, c-format msgid "card does not support digest algorithm %s\n" msgstr "卡片不支援 %s 摘要演算法\n" #, c-format msgid "signatures created so far: %lu\n" msgstr "目前建立的簽章: %lu\n" msgid "" "verification of Admin PIN is currently prohibited through this command\n" msgstr "目前在此指令中的管理者 PIN 驗證被禁止了\n" #, c-format msgid "can't access %s - invalid OpenPGP card?\n" msgstr "無法存取 %s - 無效的 OpenPGP 卡片?\n" msgid "||Please enter your PIN at the reader's pinpad" msgstr "||請在讀卡機鍵盤上輸入你的個人識別碼 (PIN)" #. TRANSLATORS: Do not translate the "|*|" prefixes but #. keep it at the start of the string. We need this elsewhere #. to get some infos on the string. msgid "|N|Initial New PIN" msgstr "|N|開始新增個人識別碼 (PIN)" msgid "run in multi server mode (foreground)" msgstr "以多重伺服器模式執行 (前景)" msgid "|LEVEL|set the debugging level to LEVEL" -msgstr "|等級|設定除錯等級為「等級」" +msgstr "|等級|設定除錯等級為指定等級" msgid "|FILE|write a log to FILE" -msgstr "|檔案|將日誌寫入至「檔案」" +msgstr "|檔案|將日誌寫入至指定檔案" msgid "|N|connect to reader at port N" msgstr "|N|從 N 埠連線至讀卡機" msgid "|NAME|use NAME as ct-API driver" -msgstr "|名稱|使用「名稱」做為 ct-API 驅動程式" +msgstr "|名稱|使用指定名稱做為 ct-API 驅動程式" msgid "|NAME|use NAME as PC/SC driver" -msgstr "|名稱|使用「名稱」做為 PC/SC 驅動程式" +msgstr "|名稱|使用指定名稱做為 PC/SC 驅動程式" msgid "do not use the internal CCID driver" msgstr "不要使用內部的 CCID 驅動程式" msgid "|N|disconnect the card after N seconds of inactivity" msgstr "|N|沒有活動達 N 秒後就與卡片斷線" msgid "do not use a reader's pinpad" msgstr "不要使用讀卡機鍵盤" msgid "deny the use of admin card commands" msgstr "禁用管理者卡片指令" msgid "use variable length input for pinpad" msgstr "輸入 PIN 時在輸入區顯示成變動長度" msgid "Usage: scdaemon [options] (-h for help)" msgstr "用法: scdaemon [選項] (或用 -h 求助)" msgid "" "Syntax: scdaemon [options] [command [args]]\n" "Smartcard daemon for GnuPG\n" msgstr "" "語法: scdaemon [選項] [指令 [引數]]\n" "GnuPg 智慧卡服務\n" msgid "please use the option `--daemon' to run the program in the background\n" msgstr "請使用 `--daemon' 選項來將此程式執行於背景\n" #, c-format msgid "handler for fd %d started\n" msgstr "用於 fd %d 的經手程式已啟動\n" #, c-format msgid "handler for fd %d terminated\n" msgstr "用於 fd %d 的經手程式已終止\n" #, c-format msgid "invalid radix64 character %02x skipped\n" msgstr "已跳過無效的 radix64 字符 %02x\n" #, c-format msgid "failed to proxy %s inquiry to client\n" msgstr "以 %s 代理伺服器查詢用戶端時失敗\n" #, c-format msgid "no running dirmngr - starting `%s'\n" msgstr "沒有執行中的 dirmngr - 正在啟動 `%s'\n" msgid "malformed DIRMNGR_INFO environment variable\n" msgstr "格式不對的 DIRMNGR_INFO 環境變數\n" #, c-format msgid "dirmngr protocol version %d is not supported\n" msgstr "未支援 dirmngr 協定版本 %d\n" msgid "can't connect to the dirmngr - trying fall back\n" msgstr "無法連線至 dirmngr - 正試著退回\n" #, c-format msgid "validation model requested by certificate: %s" msgstr "憑證所要求的驗證模型: %s" msgid "chain" msgstr "chain" msgid "shell" msgstr "shell" #, c-format msgid "critical certificate extension %s is not supported" -msgstr "未支援關鍵憑證延伸 %s" +msgstr "未支援關鍵憑證擴充欄位 %s" msgid "issuer certificate is not marked as a CA" msgstr "發行者憑證並未標記為 CA" msgid "critical marked policy without configured policies" msgstr "關鍵已標記原則沒有已組態的原則" #, c-format msgid "failed to open `%s': %s\n" msgstr "開啟 `%s' 失敗: %s\n" msgid "note: non-critical certificate policy not allowed" msgstr "請注意: 不允許非關鍵的憑證原則" msgid "certificate policy not allowed" msgstr "未允許憑證原則" msgid "looking up issuer at external location\n" msgstr "從外部位置尋找發行者\n" #, c-format msgid "number of issuers matching: %d\n" msgstr "吻合的發行者數量: %d\n" msgid "looking up issuer from the Dirmngr cache\n" msgstr "從 Dirmngr 快取尋找發行者\n" #, c-format msgid "number of matching certificates: %d\n" msgstr "吻合的憑證數量: %d\n" #, c-format msgid "dirmngr cache-only key lookup failed: %s\n" msgstr "尋找限於 dirmngr 快取的金鑰時失敗: %s\n" msgid "failed to allocate keyDB handle\n" msgstr "配置 keyDB handle 失敗\n" msgid "certificate has been revoked" msgstr "憑證已撤銷" msgid "the status of the certificate is unknown" msgstr "憑證的狀態未知" msgid "please make sure that the \"dirmngr\" is properly installed\n" msgstr "請確認 \"dirmngr\" 已安裝妥善\n" #, c-format msgid "checking the CRL failed: %s" msgstr "檢查 CRL 時失敗: %s" #, c-format msgid "certificate with invalid validity: %s" msgstr "有效性無效的憑證: %s" msgid "certificate not yet valid" msgstr "憑證尚未生效" msgid "root certificate not yet valid" msgstr "根憑證尚未生效" msgid "intermediate certificate not yet valid" msgstr "媒介憑證尚未生效" msgid "certificate has expired" msgstr "憑證已過期" msgid "root certificate has expired" msgstr "根憑證已過期" msgid "intermediate certificate has expired" msgstr "媒介憑證已過期" #, c-format msgid "required certificate attributes missing: %s%s%s" msgstr "遺失所需的憑證屬性: %s%s%s" msgid "certificate with invalid validity" msgstr "有效性無效的憑證" msgid "signature not created during lifetime of certificate" msgstr "簽章並非在憑證生存時間內所造" msgid "certificate not created during lifetime of issuer" msgstr "憑證並非在發行者生存時間內所造" msgid "intermediate certificate not created during lifetime of issuer" msgstr "媒介憑證並非在發行者生存時間內所造" msgid " ( signature created at " msgstr " ( 簽章建立於 " msgid " (certificate created at " msgstr " ( 憑證建立於 " msgid " (certificate valid from " msgstr " (憑證有效自 " msgid " ( issuer valid from " msgstr " ( 發行者有效自 " #, c-format msgid "fingerprint=%s\n" msgstr "指紋=%s\n" msgid "root certificate has now been marked as trusted\n" msgstr "根憑證現在已標記為已信任\n" msgid "interactive marking as trusted not enabled in gpg-agent\n" msgstr "在 gpg-agent 中未啟用互動式標記為已信任\n" msgid "interactive marking as trusted disabled for this session\n" msgstr "互動式標記為已信任在此作業階段中已停用\n" msgid "WARNING: creation time of signature not known - assuming current time" msgstr "警告: 簽章創造時間未知 - 假設為此刻" msgid "no issuer found in certificate" msgstr "憑證中找不到發行者" msgid "self-signed certificate has a BAD signature" msgstr "自簽憑證有 不良 簽章" msgid "root certificate is not marked trusted" msgstr "根憑證未標記為已信任" #, c-format msgid "checking the trust list failed: %s\n" msgstr "檢查信任清單時失敗: %s\n" msgid "certificate chain too long\n" msgstr "憑證鏈太長\n" msgid "issuer certificate not found" msgstr "找不到發行者憑證" msgid "certificate has a BAD signature" msgstr "憑證有 不良 簽章" msgid "found another possible matching CA certificate - trying again" msgstr "找到了另一個可能吻合的 CA 憑證 - 正再試一次" #, c-format msgid "certificate chain longer than allowed by CA (%d)" msgstr "憑證鏈比 CA 所允許的 (%d) 還長" msgid "certificate is good\n" msgstr "憑證完好\n" msgid "intermediate certificate is good\n" msgstr "媒介憑證良好\n" msgid "root certificate is good\n" msgstr "根憑證完好\n" msgid "switching to chain model" msgstr "切換至鏈模型" #, c-format msgid "validation model used: %s" msgstr "已使用的驗證模型: %s" #, c-format msgid "%s key uses an unsafe (%u bit) hash\n" msgstr "金鑰 %s 使用不安全 (%u 位元) 的雜湊\n" #, c-format msgid "a %u bit hash is not valid for a %u bit %s key\n" msgstr "%u 位元的雜湊對 %u 位元的 %s 金鑰來說是無效的\n" msgid "(this is the MD2 algorithm)\n" msgstr "(這是 MD2 演算法)\n" msgid "none" msgstr "無" msgid "[Error - invalid encoding]" msgstr "[錯誤 - 無效的編碼]" msgid "[Error - out of core]" msgstr "[錯誤 - 超出核心]" msgid "[Error - No name]" msgstr "[錯誤 - 沒有名稱]" msgid "[Error - invalid DN]" msgstr "[錯誤 - 無效的 DN]" #, c-format msgid "" "Please enter the passphrase to unlock the secret key for the X.509 " "certificate:\n" "\"%s\"\n" "S/N %s, ID 0x%08lX,\n" "created %s, expires %s.\n" msgstr "" "請輸入密語來解開 X.509 憑證所需的私鑰:\n" "\"%s\"\n" "S/N %s, ID 0x%08lX,\n" "建立於 %s, 於 %s 到期.\n" msgid "no key usage specified - assuming all usages\n" msgstr "沒有指定的金鑰用途 - 假設為所有的用途\n" #, c-format msgid "error getting key usage information: %s\n" msgstr "取得金鑰用途資訊時出錯: %s\n" msgid "certificate should not have been used for certification\n" msgstr "憑證應該還未被用於憑證\n" msgid "certificate should not have been used for OCSP response signing\n" msgstr "憑證應該還未被用於 OCSP 回應簽署\n" msgid "certificate should not have been used for encryption\n" msgstr "憑證應該還未被用於加密\n" msgid "certificate should not have been used for signing\n" msgstr "憑證應該還未被用於簽署\n" msgid "certificate is not usable for encryption\n" msgstr "憑證無法用於加密\n" msgid "certificate is not usable for signing\n" msgstr "憑證無法用於簽署\n" #, c-format msgid "line %d: invalid algorithm\n" msgstr "第 %d 列: 無效的演算法\n" #, c-format msgid "line %d: invalid key length %u (valid are %d to %d)\n" msgstr "第 %d 列: 金鑰長度 %u 無效 (有效範圍是從 %d 至 %d)\n" #, c-format msgid "line %d: no subject name given\n" msgstr "第 %d 列: 沒有給定的物件名稱\n" #, c-format msgid "line %d: invalid subject name label `%.*s'\n" msgstr "第 %d 列: 無效的物件名稱標籤 `%.*s'\n" #, c-format msgid "line %d: invalid subject name `%s' at pos %d\n" msgstr "第 %d 列: 無效的物件名稱 `%s' 於 pos %d\n" #, c-format msgid "line %d: not a valid email address\n" msgstr "第 %d 列: 不是有效的電子郵件地址\n" #, c-format msgid "line %d: error reading key `%s' from card: %s\n" msgstr "第 %d 列: 從卡片讀取金鑰 `%s' 時出錯: %s\n" #, c-format msgid "line %d: error getting key by keygrip `%s': %s\n" msgstr "第 %d 列: 以金鑰鑰柄 `%s' 取得金鑰時出錯: %s\n" #, c-format msgid "line %d: key generation failed: %s <%s>\n" msgstr "第 %d 列: 金鑰產生失敗: %s <%s>\n" msgid "" "To complete this certificate request please enter the passphrase for the key " "you just created once more.\n" msgstr "如欲完成此憑證請求, 請再輸入一次你剛才建立的金鑰密語.\n" #, c-format msgid " (%d) RSA\n" msgstr " (%d) RSA\n" #, c-format msgid " (%d) Existing key\n" msgstr " (%d) 現有的金鑰\n" #, c-format msgid " (%d) Existing key from card\n" msgstr " (%d) 卡片上現存的金鑰\n" msgid "Enter the keygrip: " msgstr "請輸入金鑰鑰柄: " msgid "Not a valid keygrip (expecting 40 hex digits)\n" msgstr "不是有效的金鑰鑰柄 (應該要是 40 位十六進制數值)\n" msgid "No key with this keygrip\n" msgstr "沒有金鑰有此金鑰鑰柄\n" #, c-format msgid "error reading the card: %s\n" msgstr "讀取卡片時出錯: %s\n" #, c-format msgid "Serial number of the card: %s\n" msgstr "卡片序號: %s\n" msgid "Available keys:\n" msgstr "可用金鑰:\n" #, c-format msgid "Possible actions for a %s key:\n" msgstr "%s 金鑰可能的動作:\n" #, c-format msgid " (%d) sign, encrypt\n" msgstr " (%d) 簽署, 加密\n" #, c-format msgid " (%d) sign\n" msgstr " (%d) 簽署\n" #, c-format msgid " (%d) encrypt\n" msgstr " (%d) 加密\n" msgid "Enter the X.509 subject name: " msgstr "請輸入 X.509 主旨名稱: " msgid "No subject name given\n" msgstr "沒有給定的物件名稱\n" #, c-format msgid "Invalid subject name label `%.*s'\n" msgstr "無效的物件名稱標籤 `%.*s'\n" #. TRANSLATORS: The 22 in the second string is the #. length of the first string up to the "%s". Please #. adjust it do the length of your translation. The #. second string is merely passed to atoi so you can #. drop everything after the number. #, c-format msgid "Invalid subject name `%s'\n" msgstr "無效的物件名稱 `%s'\n" msgid "22 translator: see certreg-ui.c:gpgsm_gencertreq_tty" msgstr "22" msgid "Enter email addresses" msgstr "請輸入電子郵件地址" msgid " (end with an empty line):\n" msgstr " (以空白列結束):\n" msgid "Enter DNS names" msgstr "請輸入 DNS 名稱" msgid " (optional; end with an empty line):\n" msgstr " (非必要; 以空白列結束):\n" msgid "Enter URIs" msgstr "請輸入 URI" msgid "Parameters to be used for the certificate request:\n" msgstr "用於憑證請求的參數:\n" msgid "Now creating certificate request. This may take a while ...\n" msgstr "現在正在建立憑證請求. 這可能會花上一段時間 ...\n" msgid "Ready. You should now send this request to your CA.\n" msgstr "準備好了. 你現在就該把此請求送到你的 CA.\n" msgid "resource problem: out of core\n" msgstr "資源問題: 超出核心\n" msgid "(this is the RC2 algorithm)\n" msgstr "(這是 RC2 演算法)\n" msgid "(this does not seem to be an encrypted message)\n" msgstr "(這看起來不像是個加密過的訊息)\n" #, c-format msgid "certificate `%s' not found: %s\n" msgstr "找不到憑證 `%s': %s\n" #, c-format msgid "error locking keybox: %s\n" msgstr "鎖住金鑰鑰匙盒時出錯: %s\n" #, c-format msgid "duplicated certificate `%s' deleted\n" msgstr "重複的 `%s' 憑證已刪除\n" #, c-format msgid "certificate `%s' deleted\n" msgstr "憑證 `%s' 已刪除\n" #, c-format msgid "deleting certificate \"%s\" failed: %s\n" msgstr "刪除憑證 \"%s\" 時失敗: %s\n" msgid "no valid recipients given\n" msgstr "沒有給定有效的收件者\n" msgid "list external keys" msgstr "列出外部金鑰" msgid "list certificate chain" msgstr "列出憑證鏈" msgid "import certificates" msgstr "匯入憑證" msgid "export certificates" msgstr "匯出憑證" msgid "register a smartcard" msgstr "註冊智慧卡" msgid "pass a command to the dirmngr" msgstr "將指令遞送給 dirmngr" msgid "invoke gpg-protect-tool" msgstr "叫用 gpg-protect-tool" msgid "create base-64 encoded output" msgstr "建立以 base-64 編碼過的輸出" msgid "assume input is in PEM format" msgstr "假設輸入的是 PEM 格式" msgid "assume input is in base-64 format" msgstr "假設輸入的是 base-64 格式" msgid "assume input is in binary format" msgstr "假設輸入的是二進制格式" msgid "use system's dirmngr if available" msgstr "如果系統有 dirmngr 的話就拿來用" msgid "never consult a CRL" msgstr "永遠不要查閱 CRL" msgid "check validity using OCSP" msgstr "用 OCSP 檢查有效性" msgid "|N|number of certificates to include" msgstr "|N|要包含的憑證數量" msgid "|FILE|take policy information from FILE" -msgstr "|檔案|從「檔案」中取得原則資訊" +msgstr "|檔案|從指定檔案中取得原則資訊" msgid "do not check certificate policies" msgstr "不要檢查憑證原則" msgid "fetch missing issuer certificates" msgstr "取回遺失的發行者憑證" msgid "don't use the terminal at all" msgstr "完全不要使用終端機" msgid "|FILE|write a server mode log to FILE" -msgstr "|檔案|將伺服器模式日誌寫入至「檔案」" +msgstr "|檔案|將伺服器模式日誌寫入至指定檔案" msgid "|FILE|write an audit log to FILE" -msgstr "|檔案|將稽核日誌寫入至「檔案」" +msgstr "|檔案|將稽核日誌寫入至指定檔案" msgid "batch mode: never ask" msgstr "批次模式: 永遠不詢問" msgid "assume yes on most questions" msgstr "假設大部分的問題都回答是" msgid "assume no on most questions" msgstr "假設大部分的問題都回答否" msgid "|FILE|add keyring to the list of keyrings" -msgstr "|檔案|將此金鑰鑰匙圈加到金鑰鑰匙圈清單「檔案」中" +msgstr "|檔案|將此金鑰鑰匙圈加到金鑰鑰匙圈清單指定檔案中" msgid "|USER-ID|use USER-ID as default secret key" -msgstr "|使用者-ID|使用「使用者-ID」做為預設私鑰" +msgstr "|使用者-ID|使用指定使用者 ID 做為預設私鑰" msgid "|SPEC|use this keyserver to lookup keys" msgstr "|SPEC|使用此金鑰伺服器來查找金鑰" msgid "|NAME|use cipher algorithm NAME" -msgstr "|名稱|使用「名稱」編密演算法" +msgstr "|名稱|使用指定名稱的編密演算法" msgid "|NAME|use message digest algorithm NAME" -msgstr "|名稱|使用「名稱」訊息摘要演算法" +msgstr "|名稱|使用指定名稱的訊息摘要演算法" msgid "Usage: gpgsm [options] [files] (-h for help)" msgstr "用法: gpgsm [選項] [檔案] (或用 -h 求助)" msgid "" "Syntax: gpgsm [options] [files]\n" "Sign, check, encrypt or decrypt using the S/MIME protocol\n" "Default operation depends on the input data\n" msgstr "" "語法: gpgsm [選項] [檔案]\n" "用 S/MIME 協定來簽署, 檢查, 加密或解密\n" "預設的操作會依輸入資料而定\n" msgid "usage: gpgsm [options] " msgstr "用法: gpgsm [選項] " #, c-format msgid "NOTE: won't be able to encrypt to `%s': %s\n" msgstr "請注意: 將無法加密為 `%s': %s\n" #, c-format msgid "unknown validation model `%s'\n" msgstr "未知的驗證模型 `%s'\n" #, c-format msgid "%s:%u: no hostname given\n" msgstr "%s:%u: 沒有給定主機名稱\n" #, c-format msgid "%s:%u: password given without user\n" msgstr "%s:%u: 給定的密碼沒有使用者\n" #, c-format msgid "%s:%u: skipping this line\n" msgstr "%s:%u: 正在跳過這一列\n" msgid "could not parse keyserver\n" msgstr "無法剖析金鑰伺服器\n" msgid "WARNING: running with faked system time: " msgstr "警告: 正在偽造的系統時間中執行: " #, c-format msgid "importing common certificates `%s'\n" msgstr "正在匯入通用憑證 `%s'\n" #, c-format msgid "can't sign using `%s': %s\n" msgstr "無法用 `%s' 來簽署: %s\n" msgid "invalid command (there is no implicit command)\n" msgstr "無效的指令 (沒有這樣的指令)\n" #, c-format msgid "total number processed: %lu\n" msgstr "處理總量: %lu\n" msgid "error storing certificate\n" msgstr "存放憑證時出錯\n" msgid "basic certificate checks failed - not imported\n" msgstr "基本的憑證檢查失敗了 - 未匯入\n" #, c-format msgid "error getting stored flags: %s\n" msgstr "取得已存放的旗標時出錯: %s\n" #, c-format msgid "error importing certificate: %s\n" msgstr "匯入憑證時出錯: %s\n" #, c-format msgid "error reading input: %s\n" msgstr "讀取輸入時出錯: %s\n" #, c-format msgid "error creating keybox `%s': %s\n" msgstr "建立金鑰鑰匙盒 `%s' 時出錯: %s\n" #, c-format msgid "keybox `%s' created\n" msgstr "`%s' 鑰匙盒已建立\n" msgid "failed to get the fingerprint\n" msgstr "取得指紋失敗\n" #, c-format msgid "problem looking for existing certificate: %s\n" msgstr "查找既有憑證的問題: %s\n" #, c-format msgid "error finding writable keyDB: %s\n" msgstr "尋找可寫入的 keyDB 時出錯: %s\n" #, c-format msgid "error storing certificate: %s\n" msgstr "存放憑證時出錯: %s\n" #, c-format msgid "problem re-searching certificate: %s\n" msgstr "重新搜尋憑證的問題: %s\n" #, c-format msgid "error storing flags: %s\n" msgstr "存放旗標時出錯: %s\n" msgid "Error - " msgstr "錯誤 - " msgid "GPG_TTY has not been set - using maybe bogus default\n" msgstr "尚未設定 GPG_TTY - 使用可能是偽造的預設值\n" #, c-format msgid "invalid formatted fingerprint in `%s', line %d\n" msgstr "無效的格式化指紋於 `%s', 第 %d 列\n" #, c-format msgid "invalid country code in `%s', line %d\n" msgstr "無效的國家代碼於 `%s', 第 %d 列\n" #, c-format msgid "" "You are about to create a signature using your certificate:\n" "\"%s\"\n" "This will create a qualified signature by law equated to a handwritten " "signature.\n" "\n" "%s%sAre you really sure that you want to do this?" msgstr "" "你正要用你的這個憑證來建立簽章:\n" "\"%s\"\n" "這會建立出在法律上與簽名等效的合格簽章.\n" "\n" "%s%s請問你是否真的確定要這樣做了?" msgid "" "Note, that this software is not officially approved to create or verify such " "signatures.\n" msgstr "請注意, 本軟體並未正式被認可來建立或驗證這樣的簽章.\n" #, c-format msgid "" "You are about to create a signature using your certificate:\n" "\"%s\"\n" "Note, that this certificate will NOT create a qualified signature!" msgstr "" "你正要用你的這個憑證來建立簽章:\n" "\"%s\"\n" "請注意, 這個憑證並 不會 建立出合格的簽章!" #, c-format msgid "hash algorithm %d (%s) for signer %d not supported; using %s\n" msgstr "雜湊演算法 %d (%s) 為簽署者 %d 所用, 但並不支援; 改用 %s\n" #, c-format msgid "hash algorithm used for signer %d: %s (%s)\n" msgstr "簽署者 %d 所用的雜湊演算法: %s (%s)\n" #, c-format msgid "checking for qualified certificate failed: %s\n" msgstr "檢查合格憑證時失敗: %s\n" msgid "Signature made " msgstr "簽章建立於 " msgid "[date not given]" msgstr "[ 未給定日期 ]" #, c-format msgid " using certificate ID 0x%08lX\n" msgstr " 以憑證 ID 0x%08lX\n" msgid "" "invalid signature: message digest attribute does not match computed one\n" msgstr "無效的簽章: 訊息摘要屬性與計算而得的不吻合\n" msgid "Good signature from" msgstr "完好的簽章來自於" msgid " aka" msgstr " 亦即" msgid "This is a qualified signature\n" msgstr "這是一份合格簽章\n" msgid "quiet" msgstr "安靜模式" msgid "print data out hex encoded" msgstr "列印資料超出十六進制編碼範圍" msgid "decode received data lines" msgstr "對已收到的資料列解碼" msgid "|NAME|connect to Assuan socket NAME" -msgstr "|名稱|連線至 Assuan socket「名稱」" +msgstr "|名稱|連線至指定名稱的 Assuan socket" msgid "run the Assuan server given on the command line" msgstr "執行命令列所給定的 Assuan 伺服器" msgid "do not use extended connect mode" msgstr "不要使用延伸連線模式" msgid "|FILE|run commands from FILE on startup" -msgstr "|檔案|啟動時執行「檔案」中的指令" +msgstr "|檔案|啟動時執行指定檔案中的指令" msgid "run /subst on startup" msgstr "啟動時執行 /subst" msgid "Usage: gpg-connect-agent [options] (-h for help)" msgstr "用法: gpg-connect-agent [選項] (或用 -h 求助)" msgid "" "Syntax: gpg-connect-agent [options]\n" "Connect to a running agent and send commands\n" msgstr "" "語法: gpg-connect-agent [選項]\n" "連線至運作中的代理程式並送出指令\n" #, c-format msgid "option \"%s\" requires a program and optional arguments\n" msgstr "\"%s\" 選項需要有程式及選用的引數\n" #, c-format msgid "option \"%s\" ignored due to \"%s\"\n" msgstr "\"%s\" 選項因為 \"%s\" 而被忽略了\n" #, c-format msgid "receiving line failed: %s\n" msgstr "接收列時失敗: %s\n" msgid "line too long - skipped\n" msgstr "列太長 - 已跳過\n" msgid "line shortened due to embedded Nul character\n" msgstr "列因嵌入的 Nul 字符而縮短了\n" #, c-format msgid "unknown command `%s'\n" msgstr "未知的指令 `%s'\n" #, c-format msgid "sending line failed: %s\n" msgstr "送出列時失敗: %s\n" #, c-format msgid "error sending %s command: %s\n" msgstr "送出 `%s' 指令時出錯: %s\n" #, c-format msgid "error sending standard options: %s\n" msgstr "送出標準選項時出錯: %s\n" msgid "Options controlling the diagnostic output" msgstr "控制著診斷性輸出的選項" msgid "Options controlling the configuration" msgstr "控制著組態的選項" msgid "Options useful for debugging" msgstr "對除錯有幫助的選項" msgid "|FILE|write server mode logs to FILE" -msgstr "|檔案|將伺服器模式日誌寫入至「檔案」" +msgstr "|檔案|將伺服器模式日誌寫入至指定檔案" msgid "Options controlling the security" msgstr "控制著安全性的選項" msgid "|N|expire SSH keys after N seconds" msgstr "|N|在 N 秒之後讓 SSH 金鑰過期" msgid "|N|set maximum PIN cache lifetime to N seconds" msgstr "|N|把個人識別碼 (PIN) 快取最大生存時間設成 N 秒" msgid "|N|set maximum SSH key lifetime to N seconds" msgstr "|N|把 SSH 金鑰最大生存時間設成 N 秒" msgid "Options enforcing a passphrase policy" msgstr "強制執行密語原則的選項" msgid "do not allow to bypass the passphrase policy" msgstr "不允許略過密語原則" msgid "|N|set minimal required length for new passphrases to N" msgstr "|N|把新密語所需的最短長度設成 N" msgid "|N|require at least N non-alpha characters for a new passphrase" msgstr "|N|新密語至少要有 N 個非字母的字符" msgid "|FILE|check new passphrases against pattern in FILE" -msgstr "|檔案|用「檔案」中的樣式來檢查新密語" +msgstr "|檔案|用指定檔案中的樣式來檢查新密語" msgid "|N|expire the passphrase after N days" msgstr "|N|在 N 天之後讓密語過期" msgid "do not allow the reuse of old passphrases" msgstr "不允許重複使用舊密語" msgid "|NAME|use NAME as default secret key" -msgstr "|名字|使用「名字」做為預設私鑰" +msgstr "|名字|使用指定名字做為預設私鑰" msgid "|NAME|encrypt to user ID NAME as well" -msgstr "|名字|也加密給使用者 ID「名字」" +msgstr "|名字|也加密給指定名字的使用者 ID" msgid "|SPEC|set up email aliases" msgstr "|SPEC|設定電子郵件別名" msgid "Configuration for Keyservers" msgstr "金鑰伺服器組態" msgid "|URL|use keyserver at URL" msgstr "|URL|使用位於 URL 的金鑰伺服器" msgid "allow PKA lookups (DNS requests)" msgstr "允許 PKA 查找 (DNS 請求)" msgid "|MECHANISMS|use MECHANISMS to locate keys by mail address" msgstr "|MECHANISMS|使用 MECHANISMS 機制來從郵件地址找出金鑰" msgid "disable all access to the dirmngr" msgstr "停用所有的 dirmngr 存取" msgid "|NAME|use encoding NAME for PKCS#12 passphrases" -msgstr "|名稱|將「名稱」編碼用於 PKCS#12 密語" +msgstr "|名稱|將指定名稱編碼用於 PKCS#12 密語" msgid "do not check CRLs for root certificates" msgstr "不要為根憑證檢查 CRL" msgid "Options controlling the format of the output" msgstr "控制著輸出格式的選項" msgid "Options controlling the interactivity and enforcement" msgstr "控制著互動及強制執行的選項" msgid "Configuration for HTTP servers" msgstr "HTTP 伺服器組態" msgid "use system's HTTP proxy setting" msgstr "使用系統的 HTTP 代理伺服器設定" msgid "Configuration of LDAP servers to use" msgstr "要用的 LDAP 伺服器組態" msgid "LDAP server list" msgstr "LDAP 伺服器清單" msgid "Configuration for OCSP" msgstr "OCSP 組態" #, c-format msgid "External verification of component %s failed" msgstr "元件 %s 的外部驗證失敗" msgid "Note that group specifications are ignored\n" msgstr "請注意群組規格已忽略\n" msgid "list all components" msgstr "列出所有的元件" msgid "check all programs" msgstr "檢查所有的程式" msgid "|COMPONENT|list options" msgstr "|元件|列出選項" msgid "|COMPONENT|change options" msgstr "|元件|變更選項" msgid "|COMPONENT|check options" msgstr "|元件|檢查選項" msgid "apply global default values" msgstr "套用全域預設值" msgid "get the configuration directories for gpgconf" msgstr "取得 gpgconf 的組態目錄" msgid "list global configuration file" msgstr "列出全域組態檔" msgid "check global configuration file" msgstr "檢查全域組態檔案" msgid "use as output file" msgstr "當作輸出檔案來使用" msgid "activate changes at runtime, if possible" msgstr "如果可能的話, 在執行期啟用變更" msgid "Usage: gpgconf [options] (-h for help)" msgstr "用法: gpgconf [選項] (或用 -h 求助)" msgid "" "Syntax: gpgconf [options]\n" "Manage configuration options for tools of the GnuPG system\n" msgstr "" "語法: gpgconf [選項]\n" "管理 GnuPG 系統工具的組態選項\n" msgid "usage: gpgconf [options] " msgstr "用法: gpgconf [選項] " msgid "Need one component argument" msgstr "需要一個元件引數" msgid "Component not found" msgstr "找不到元件" msgid "No argument allowed" msgstr "未允許使用引數" msgid "" "@\n" "Commands:\n" " " msgstr "" "@\n" "指令:\n" " " msgid "decryption modus" msgstr "解密方式" msgid "encryption modus" msgstr "加密方式" msgid "tool class (confucius)" msgstr "工具類別 (confucius)" msgid "program filename" msgstr "程式檔名" msgid "secret key file (required)" msgstr "私鑰檔案 (必要)" msgid "input file name (default stdin)" msgstr "輸入檔名 (預設是標準輸入)" msgid "Usage: symcryptrun [options] (-h for help)" msgstr "用法: symcryptrun [選項] (或用 -h 求助)" msgid "" "Syntax: symcryptrun --class CLASS --program PROGRAM --keyfile KEYFILE " "[options...] COMMAND [inputfile]\n" "Call a simple symmetric encryption tool\n" msgstr "" "語法: symcryptrun --class 型別 --program 程式 --keyfile 金鑰檔案 [選項...] 指" "令 [輸入檔案]\n" "叫用單純對稱式加密工具\n" #, c-format msgid "%s on %s aborted with status %i\n" msgstr "%s 於 %s 以 %i 狀態中止了\n" #, c-format msgid "%s on %s failed with status %i\n" msgstr "%s 於 %s 以 %i 狀態失敗了\n" #, c-format msgid "can't create temporary directory `%s': %s\n" msgstr "無法建立暫存目錄 `%s': %s\n" #, c-format msgid "could not open %s for writing: %s\n" msgstr "無法開啟 %s 來寫入: %s\n" #, c-format msgid "error writing to %s: %s\n" msgstr "寫入 %s 時出錯: %s\n" #, c-format msgid "error reading from %s: %s\n" msgstr "讀取 %s 時出錯: %s\n" #, c-format msgid "error closing %s: %s\n" msgstr "關閉 %s 時出錯: %s\n" msgid "no --program option provided\n" msgstr "沒有提供 --program 選項\n" msgid "only --decrypt and --encrypt are supported\n" msgstr "祇支援 --decrypt 和 --encrypt\n" msgid "no --keyfile option provided\n" msgstr "沒有提供 --keyfile 選項\n" msgid "cannot allocate args vector\n" msgstr "無法配置引數向量\n" #, c-format msgid "could not create pipe: %s\n" msgstr "無法建立管道: %s\n" #, c-format msgid "could not create pty: %s\n" msgstr "無法建立 pty: %s\n" #, c-format msgid "could not fork: %s\n" msgstr "無法衍生: %s\n" #, c-format msgid "execv failed: %s\n" msgstr "execv 失敗: %s\n" #, c-format msgid "select failed: %s\n" msgstr "挑選失敗: %s\n" #, c-format msgid "read failed: %s\n" msgstr "讀取失敗: %s\n" #, c-format msgid "pty read failed: %s\n" msgstr "pty 讀取失敗: %s\n" #, c-format msgid "waitpid failed: %s\n" msgstr "waitpid 失敗: %s\n" #, c-format msgid "child aborted with status %i\n" msgstr "子代以 %i 狀態中止了\n" #, c-format msgid "cannot allocate infile string: %s\n" msgstr "無法配置檔內字串: %s\n" #, c-format msgid "cannot allocate outfile string: %s\n" msgstr "無法配置檔外字串: %s\n" #, c-format msgid "either %s or %s must be given\n" msgstr "一定要給定 %s 或 %s 其中之一\n" msgid "no class provided\n" msgstr "沒有提供類別\n" #, c-format msgid "class %s is not supported\n" msgstr "未支援 %s 類別\n" msgid "Usage: gpg-check-pattern [options] patternfile (-h for help)\n" msgstr "用法: gpg-check-pattern [選項] 樣式檔案 (或用 -h 求助)\n" msgid "" "Syntax: gpg-check-pattern [options] patternfile\n" "Check a passphrase given on stdin against the patternfile\n" msgstr "" "語法: gpg-check-pattern [選項] 樣式檔案\n" "用樣式檔案來檢查由標準輸入給定的密語\n" #~ msgid "you may want to start the gpg-agent first\n" #~ msgstr "你可能會先想啟動 gpg-agent\n" #~ msgid "error loading `%s': %s\n" #~ msgstr "載入 `%s' 時出錯: %s\n" #~ msgid "failed to allocated keyDB handle\n" #~ msgstr "配置 keyDB handle 失敗\n" #~ msgid "Command> " #~ msgstr "指令> " #~ msgid "Please report bugs to .\n" #~ msgstr "" #~ "請向 回報程式瑕疵, 向 回報翻譯瑕疵.\n" #~ msgid "the trustdb is corrupted; please run \"gpg --fix-trustdb\".\n" #~ msgstr "信任資料庫已損毀; 請執行 \"gpg --fix-trustdb\".\n" #~ msgid "Please report bugs to " #~ msgstr "翻譯瑕疵請回報給 Jedi@Jedi.org ; 程式瑕疵則請回報給" #~ msgid "DSA keypair will have %u bits.\n" #~ msgstr "DSA 金鑰對會有 %u 位元長.\n" #~ msgid "this command has not yet been implemented\n" #~ msgstr "這個指令尚未實做完成\n" #~ msgid "Repeat passphrase\n" #~ msgstr "請再輸入一次密語\n" #~ msgid "||Please enter your PIN at the reader's keypad%%0A[sigs done: %lu]" #~ msgstr "||請在讀卡機鍵盤上輸入你的 PIN%%0A[簽署完成: %lu]" #~ msgid "|A|Admin PIN" #~ msgstr "|A|管理者 PIN" #~ msgid "read options from file" #~ msgstr "從檔案中讀取選項" #~ msgid "Used libraries:" #~ msgstr "已使用的函示庫:" #~ msgid "generate PGP 2.x compatible messages" #~ msgstr "產生 PGP 2.x 相容性訊息" #~ msgid "|[FILE]|make a signature" #~ msgstr "|[檔案]|做出簽章" #~ msgid "|[FILE]|make a clear text signature" #~ msgstr "|[檔案]|做出明文簽章" #~ msgid "|NAME|use NAME as default recipient" #~ msgstr "|名字|使用「名字」做為預設收件者" #~ msgid "use the default key as default recipient" #~ msgstr "使用預設的金鑰做為預設的收件者" #~ msgid "force v3 signatures" #~ msgstr "強迫使用第三版簽章" #~ msgid "always use a MDC for encryption" #~ msgstr "總是使用 MDC 來加密" #~ msgid "add this secret keyring to the list" #~ msgstr "將此私鑰鑰匙圈加到清單中" #~ msgid "|NAME|set terminal charset to NAME" #~ msgstr "|名稱|將終端機字元集設為「名稱」" #~ msgid "|FILE|load extension module FILE" #~ msgstr "|檔案|載入延伸模組「檔案」" #~ msgid "|N|use compress algorithm N" #~ msgstr "|N|使用壓縮演算法 N" #~ msgid "remove key from the public keyring" #~ msgstr "從公鑰鑰匙圈裡移除金鑰" #~ msgid "can't gen prime with pbits=%u qbits=%u\n" #~ msgstr "無法以 %u 位元長的 p 及 %u 位元長的 q 產生質數\n" #~ msgid "can't generate a prime with less than %d bits\n" #~ msgstr "無法產生少於 %d 位元的質數\n" #~ msgid "no entropy gathering module detected\n" #~ msgstr "偵測不到亂數蒐集模組\n" #~ msgid "can't lock `%s': %s\n" #~ msgstr "無法鎖定 `%s': %s\n" #~ msgid "can't stat `%s': %s\n" #~ msgstr "無法取得檔案 `%s' 的資訊: %s\n" #~ msgid "`%s' is not a regular file - ignored\n" #~ msgstr "`%s' 不是一個標準的檔案 - 已略過\n" #~ msgid "note: random_seed file is empty\n" #~ msgstr "請注意: random_seed 檔案是空的\n" #~ msgid "WARNING: invalid size of random_seed file - not used\n" #~ msgstr "警告: random_seed 檔案大小無效 - 不予採用\n" #~ msgid "can't read `%s': %s\n" #~ msgstr "無法讀取 `%s': %s\n" #~ msgid "note: random_seed file not updated\n" #~ msgstr "請注意: random_seed 檔案未更新\n" #~ msgid "can't write `%s': %s\n" #~ msgstr "無法寫入 `%s': %s\n" #~ msgid "can't close `%s': %s\n" #~ msgstr "無法關閉 `%s': %s\n" #~ msgid "WARNING: using insecure random number generator!!\n" #~ msgstr "警告: 正在使用不安全的隨機數字產生器!!\n" #~ msgid "" #~ "The random number generator is only a kludge to let\n" #~ "it run - it is in no way a strong RNG!\n" #~ "\n" #~ "DON'T USE ANY DATA GENERATED BY THIS PROGRAM!!\n" #~ "\n" #~ msgstr "" #~ "這個隨機數字產生器根本就是七拼八湊出來的鳥東西 -\n" #~ "它根本就不是強而有力的亂數產生器!\n" #~ "\n" #~ "*** 絕對不要把這個程式產生的任何資料拿來用!! ***\n" #~ "\n" #~ msgid "" #~ "Please wait, entropy is being gathered. Do some work if it would\n" #~ "keep you from getting bored, because it will improve the quality\n" #~ "of the entropy.\n" #~ msgstr "" #~ "請稍待片刻, 系統此時正在蒐集亂數. 如果你會覺得無聊的話,\n" #~ "不妨做些別的事, 這樣子甚至能夠讓亂數的品質更好.\n" #~ msgid "" #~ "\n" #~ "Not enough random bytes available. Please do some other work to give\n" #~ "the OS a chance to collect more entropy! (Need %d more bytes)\n" #~ msgstr "" #~ "\n" #~ "隨機位元組不夠多. 請多做一些有的沒的事情, \n" #~ "這樣作業系統纔能蒐集到更多的亂數! (還需要 %d 位元組)\n" #~ msgid "card reader not available\n" #~ msgstr "沒有讀卡機可用\n" #~ msgid "Please insert the card and hit return or enter 'c' to cancel: " #~ msgstr "請插入卡片並按下 [Enter], 或者輸入 'c' 取消: " #~ msgid "Hit return when ready or enter 'c' to cancel: " #~ msgstr "準備好時請按下 [Enter], 或者輸入 'c' 取消: " #~ msgid "Enter New Admin PIN: " #~ msgstr "請輸入新的管理者 PIN: " #~ msgid "Enter New PIN: " #~ msgstr "請輸入新的 PIN: " #~ msgid "Enter Admin PIN: " #~ msgstr "請輸入管理者 PIN: " #~ msgid "cipher extension `%s' not loaded due to unsafe permissions\n" #~ msgstr "編密法延伸模組 `%s' 因為權限不安全而未載入\n" #~ msgid "NOTE: %s is not available in this version\n" #~ msgstr "請注意: %s 在本版中無法使用\n" #~ msgid "-k[v][v][v][c] [user-id] [keyring]" #~ msgstr "-k[v][v][v][c] [使用者ID] [鑰匙圈]" #~ msgid "" #~ "It's up to you to assign a value here; this value will never be exported\n" #~ "to any 3rd party. We need it to implement the web-of-trust; it has " #~ "nothing\n" #~ "to do with the (implicitly created) web-of-certificates." #~ msgstr "" #~ "在這裡指派的數值完全是看你自己決定; 這些數值永遠不會匯出給其他人.\n" #~ "我們需要它來實施信任網絡; 這跟 (自動建立起的) 憑證網絡一點關係也沒有." #~ msgid "" #~ "To build the Web-of-Trust, GnuPG needs to know which keys are\n" #~ "ultimately trusted - those are usually the keys for which you have\n" #~ "access to the secret key. Answer \"yes\" to set this key to\n" #~ "ultimately trusted\n" #~ msgstr "" #~ "要建立起信任網絡, GnuPG 需要知道哪些金鑰是被徹底信任的 -\n" #~ "那些金鑰通常就是你有辦法存取到私鑰的. 回答 \"yes\" 來將這些\n" #~ "金鑰設成徹底信任\n" #~ msgid "If you want to use this untrusted key anyway, answer \"yes\"." #~ msgstr "如果你無論如何都想要用這把未被信任的金鑰, 請回答 \"yes\"." #~ msgid "" #~ "Enter the user ID of the addressee to whom you want to send the message." #~ msgstr "輸入你要遞送的訊息接收者的使用者 ID." #~ msgid "" #~ "Select the algorithm to use.\n" #~ "\n" #~ "DSA (aka DSS) is the Digital Signature Algorithm and can only be used\n" #~ "for signatures.\n" #~ "\n" #~ "Elgamal is an encrypt-only algorithm.\n" #~ "\n" #~ "RSA may be used for signatures or encryption.\n" #~ "\n" #~ "The first (primary) key must always be a key which is capable of signing." #~ msgstr "" #~ "請選擇要使用的演算法.\n" #~ "\n" #~ "DSA (亦即 DSS) 是數位簽章演算法 (Digital Signature Algorithm),\n" #~ "祇能用於簽署.\n" #~ "\n" #~ "Elgamal 是祇能用於加密的演算法.\n" #~ "\n" #~ "RSA 可以被用來簽署及加密.\n" #~ "\n" #~ "第一把 (主要的) 金鑰一定要含有能用於簽署的金鑰." #~ msgid "" #~ "In general it is not a good idea to use the same key for signing and\n" #~ "encryption. This algorithm should only be used in certain domains.\n" #~ "Please consult your security expert first." #~ msgstr "" #~ "通常來說用同一把金鑰簽署及加密並不是個好主意.\n" #~ "這個演算法應該祇被用於特定的情況下.\n" #~ "請先聯絡你的安全專家." #~ msgid "Enter the size of the key" #~ msgstr "請輸入金鑰尺寸" #~ msgid "Answer \"yes\" or \"no\"" #~ msgstr "請回答 \"yes\" 或 \"no\"" #~ msgid "" #~ "Enter the required value as shown in the prompt.\n" #~ "It is possible to enter a ISO date (YYYY-MM-DD) but you won't\n" #~ "get a good error response - instead the system tries to interpret\n" #~ "the given value as an interval." #~ msgstr "" #~ "請輸入提示裡所要求的數值.\n" #~ "你可以輸入 ISO 日期格式 (YYYY-MM-DD), 但是不會得到良好的錯誤回應 -\n" #~ "反之, 系統會試著把給定的數值中斷成若干片段." #~ msgid "Enter the name of the key holder" #~ msgstr "請輸入金鑰持有人的名字" #~ msgid "please enter an optional but highly suggested email address" #~ msgstr "請輸入選用 (但強烈建議使用) 的電子郵件位址" #~ msgid "Please enter an optional comment" #~ msgstr "請輸入選用的註釋" #~ msgid "" #~ "N to change the name.\n" #~ "C to change the comment.\n" #~ "E to change the email address.\n" #~ "O to continue with key generation.\n" #~ "Q to to quit the key generation." #~ msgstr "" #~ "N 修改姓名.\n" #~ "C 修改註釋.\n" #~ "E 修改電子郵件位址.\n" #~ "O 繼續產生金鑰.\n" #~ "Q 中止產生金鑰." #~ msgid "" #~ "Answer \"yes\" (or just \"y\") if it is okay to generate the sub key." #~ msgstr "如果你覺得可以產生子鑰的話, 就回答 \"yes\" (或者祇 \"y\" 就好)." #~ msgid "" #~ "When you sign a user ID on a key, you should first verify that the key\n" #~ "belongs to the person named in the user ID. It is useful for others to\n" #~ "know how carefully you verified this.\n" #~ "\n" #~ "\"0\" means you make no particular claim as to how carefully you verified " #~ "the\n" #~ " key.\n" #~ "\n" #~ "\"1\" means you believe the key is owned by the person who claims to own " #~ "it\n" #~ " but you could not, or did not verify the key at all. This is useful " #~ "for\n" #~ " a \"persona\" verification, where you sign the key of a pseudonymous " #~ "user.\n" #~ "\n" #~ "\"2\" means you did casual verification of the key. For example, this " #~ "could\n" #~ " mean that you verified the key fingerprint and checked the user ID on " #~ "the\n" #~ " key against a photo ID.\n" #~ "\n" #~ "\"3\" means you did extensive verification of the key. For example, this " #~ "could\n" #~ " mean that you verified the key fingerprint with the owner of the key " #~ "in\n" #~ " person, and that you checked, by means of a hard to forge document " #~ "with a\n" #~ " photo ID (such as a passport) that the name of the key owner matches " #~ "the\n" #~ " name in the user ID on the key, and finally that you verified (by " #~ "exchange\n" #~ " of email) that the email address on the key belongs to the key " #~ "owner.\n" #~ "\n" #~ "Note that the examples given above for levels 2 and 3 are *only* " #~ "examples.\n" #~ "In the end, it is up to you to decide just what \"casual\" and \"extensive" #~ "\"\n" #~ "mean to you when you sign other keys.\n" #~ "\n" #~ "If you don't know what the right answer is, answer \"0\"." #~ msgstr "" #~ "當你要在金鑰上簽署使用者 ID 時, 你首先必須先驗證那把金鑰\n" #~ "確實屬於那個使用者 ID 上叫那個名字的人. 這對那些知道你多\n" #~ "小心驗證的人來說很有用.\n" #~ "\n" #~ "\"0\" 表示你不能提出任何特別的主張來表明\n" #~ " 你多仔細驗證那把金鑰\n" #~ "\n" #~ "\"1\" 表示你相信這把金鑰屬於那個主張是主人的人,\n" #~ " 但是你不能或沒有驗證那把金鑰.\n" #~ " 這對那些祇想要 \"個人的\" 驗證的人來說很有用,\n" #~ " 因為你簽署了一把擬似匿名使用者的金鑰.\n" #~ "\n" #~ "\"2\" 表示你真的仔細驗證了那把金鑰.\n" #~ " 例如說, 這能表示你驗證了這把金鑰的指紋和\n" #~ " 使用者 ID, 並比對了照片 ID.\n" #~ "\n" #~ "\"3\" 表示你真的做了大規模的驗證金鑰工作.\n" #~ " 例如說, 這能表示你向金鑰持有人驗證了金鑰指紋,\n" #~ " 而且你透過附帶照片而難以偽造的文件 (像是護照)\n" #~ " 確認了金鑰持有人的姓名與金鑰上使用者 ID 的一致,\n" #~ " 最後你還 (透過電子郵件往來) 驗證了金鑰上的\n" #~ " 電子郵件位址確實屬於金鑰持有人.\n" #~ "\n" #~ "請注意上述關於等級 2 和 3 的例子 \"祇是\" 例子而已.\n" #~ "最後, 還是得由你自己決定當你簽署其他金鑰時,\n" #~ "甚麼是 \"漫不經心\", 而甚麼是 \"超級謹慎\".\n" #~ "\n" #~ "如果你不知道應該選甚麼答案的話, 就選 \"0\"." #~ msgid "Answer \"yes\" if you want to sign ALL the user IDs" #~ msgstr "如果你想要簽署 *所有* 使用者 ID 的話就回答 \"yes\"" #~ msgid "" #~ "Answer \"yes\" if you really want to delete this user ID.\n" #~ "All certificates are then also lost!" #~ msgstr "" #~ "如果你真的想要刪除這個使用者 ID 的話就回答 \"yes\".\n" #~ "所有的憑證在那之後也都會失去!" #~ msgid "Answer \"yes\" if it is okay to delete the subkey" #~ msgstr "如果可以刪除這把子鑰的話就回答 \"yes\"" #~ msgid "" #~ "This is a valid signature on the key; you normally don't want\n" #~ "to delete this signature because it may be important to establish a\n" #~ "trust connection to the key or another key certified by this key." #~ msgstr "" #~ "這是一份在這把金鑰上的有效簽章; 通常你不會想要刪除這份簽章,\n" #~ "因為要跟這把金鑰或其他由這把金鑰所驗證的金鑰建立起信任連結\n" #~ "時, 會相當重要." #~ msgid "" #~ "This signature can't be checked because you don't have the\n" #~ "corresponding key. You should postpone its deletion until you\n" #~ "know which key was used because this signing key might establish\n" #~ "a trust connection through another already certified key." #~ msgstr "" #~ "這份簽章無法被檢驗, 因為你沒有符合的金鑰. 你應該延緩刪除它,\n" #~ "直到你知道哪一把金鑰被使用了; 因為這把來簽署的金鑰可能透過\n" #~ "其他已經驗證的金鑰建立了一個信任連結." #~ msgid "" #~ "The signature is not valid. It does make sense to remove it from\n" #~ "your keyring." #~ msgstr "這份簽章無效. 從你的鑰匙圈中將它移除相當合理." #~ msgid "" #~ "This is a signature which binds the user ID to the key. It is\n" #~ "usually not a good idea to remove such a signature. Actually\n" #~ "GnuPG might not be able to use this key anymore. So do this\n" #~ "only if this self-signature is for some reason not valid and\n" #~ "a second one is available." #~ msgstr "" #~ "這是一份和這個金鑰使用者 ID 相繫的簽章. 通常\n" #~ "把這樣的簽章移除不會是個好點子. 事實上 GnuPG\n" #~ "可能從此就不能再使用這把金鑰了. 所以祇有在這\n" #~ "把金鑰的第一個自我簽章因某些原因無效, 而第二\n" #~ "個還可用的情況下纔這麼做." #~ msgid "" #~ "Change the preferences of all user IDs (or just of the selected ones)\n" #~ "to the current list of preferences. The timestamp of all affected\n" #~ "self-signatures will be advanced by one second.\n" #~ msgstr "" #~ "變更所有 (或祇有被選取的那幾個) 使用者 ID 的偏好成現用的偏好清單.\n" #~ "所有受到影響的自我簽章的時間戳記都會增加一秒鐘.\n" #~ msgid "" #~ "Please repeat the last passphrase, so you are sure what you typed in." #~ msgstr "請再次輸入最後的密語, 以確定你到底鍵入了些甚麼." #~ msgid "Give the name of the file to which the signature applies" #~ msgstr "請給定簽章所要套用的檔案名稱" #~ msgid "Answer \"yes\" if it is okay to overwrite the file" #~ msgstr "如果可以覆寫這個檔案的話就回答 \"yes\"" #~ msgid "" #~ "Please enter a new filename. If you just hit RETURN the default\n" #~ "file (which is shown in brackets) will be used." #~ msgstr "" #~ "請輸入一個新的檔名. 如果你直接按下 Enter, 那麼就\n" #~ "會使用預設的檔案 (顯示在括號中)." #~ msgid "" #~ "You should specify a reason for the certification. Depending on the\n" #~ "context you have the ability to choose from this list:\n" #~ " \"Key has been compromised\"\n" #~ " Use this if you have a reason to believe that unauthorized persons\n" #~ " got access to your secret key.\n" #~ " \"Key is superseded\"\n" #~ " Use this if you have replaced this key with a newer one.\n" #~ " \"Key is no longer used\"\n" #~ " Use this if you have retired this key.\n" #~ " \"User ID is no longer valid\"\n" #~ " Use this to state that the user ID should not longer be used;\n" #~ " this is normally used to mark an email address invalid.\n" #~ msgstr "" #~ "你應該為這份憑證指定一個原因.\n" #~ "根據情境的不同, 你應該可以從這個清單中選出一項:\n" #~ " \"金鑰已經被洩漏了\"\n" #~ " 如果你相信有某個未經許可的傢伙取得了你的私鑰,\n" #~ " 就選這個.\n" #~ " \"金鑰被代換了\"\n" #~ " 如果你把金鑰換成新的了, 就選這個.\n" #~ " \"金鑰不再被使用了\"\n" #~ " 如果你已經撤回了這把金鑰, 就選這個.\n" #~ " \"使用者 ID 不再有效了\"\n" #~ " 如果這個使用者 ID 不再被使用了, 就選這個;\n" #~ " 這通常用來表示某個電子郵件位址不再有效了.\n" #~ msgid "" #~ "If you like, you can enter a text describing why you issue this\n" #~ "revocation certificate. Please keep this text concise.\n" #~ "An empty line ends the text.\n" #~ msgstr "" #~ "你也可以輸入一串文字來描述為甚麼發佈這份撤銷憑證的理由.\n" #~ "請讓這段文字保持簡明扼要.\n" #~ "用空白列來結束這段文字.\n" #~ msgid " algorithms on these user IDs:\n" #~ msgstr " 無法使用:\n" #~ msgid "can't query passphrase in batch mode\n" #~ msgstr "無法在批次模式中查詢密語\n" #~ msgid "Enter passphrase: " #~ msgstr "請輸入密語: " #~ msgid "Repeat passphrase: " #~ msgstr "請再輸入一次密語: " #~ msgid "no photo viewer set\n" #~ msgstr "沒有設定照片檢視程式\n" #~ msgid "general error" #~ msgstr "一般性錯誤" #~ msgid "unknown packet type" #~ msgstr "未知的封包型態" #~ msgid "unknown pubkey algorithm" #~ msgstr "未知的公鑰演算法" #~ msgid "unknown digest algorithm" #~ msgstr "未知的摘要演算法" #~ msgid "bad public key" #~ msgstr "損壞的公鑰" #~ msgid "bad secret key" #~ msgstr "損壞的私鑰" #~ msgid "bad signature" #~ msgstr "損壞的簽章" #~ msgid "checksum error" #~ msgstr "加總檢查錯誤" #~ msgid "can't open the keyring" #~ msgstr "沒辦法開啟鑰匙圈" #~ msgid "invalid packet" #~ msgstr "無效的封包" #~ msgid "invalid armor" #~ msgstr "無效的封裝" #~ msgid "no such user id" #~ msgstr "沒有這個使用者 ID" #~ msgid "wrong secret key used" #~ msgstr "用了錯誤的私鑰" #~ msgid "bad key" #~ msgstr "損壞的金鑰" #~ msgid "file write error" #~ msgstr "檔案寫入錯誤" #~ msgid "file open error" #~ msgstr "檔案開啟錯誤" #~ msgid "file create error" #~ msgstr "檔案建立錯誤" #~ msgid "invalid passphrase" #~ msgstr "無效的密語" #~ msgid "unimplemented pubkey algorithm" #~ msgstr "尚未實做的公鑰演算法" #~ msgid "unimplemented cipher algorithm" #~ msgstr "尚未實做的編密演算法" #~ msgid "unknown signature class" #~ msgstr "未知的簽章層級" #~ msgid "trust database error" #~ msgstr "信任資料庫錯誤" #~ msgid "resource limit" #~ msgstr "資源限制" #~ msgid "invalid keyring" #~ msgstr "無效的鑰匙圈" #~ msgid "malformed user id" #~ msgstr "變造過的使用者 ID" #~ msgid "file close error" #~ msgstr "檔案關閉錯誤" #~ msgid "file rename error" #~ msgstr "檔案更名錯誤" #~ msgid "file delete error" #~ msgstr "檔案刪除錯誤" #~ msgid "unexpected data" #~ msgstr "未預期的資料" #~ msgid "timestamp conflict" #~ msgstr "時間戳印有矛盾" #~ msgid "unusable pubkey algorithm" #~ msgstr "無法使用的公鑰演算法" #~ msgid "file exists" #~ msgstr "檔案已存在" #~ msgid "weak key" #~ msgstr "金鑰薄弱" #~ msgid "bad URI" #~ msgstr "損壞的 URI" #~ msgid "unsupported URI" #~ msgstr "未支援的 URI" #~ msgid "network error" #~ msgstr "網路錯誤" #~ msgid "not processed" #~ msgstr "未處理" #~ msgid "unusable public key" #~ msgstr "不可用的公鑰" #~ msgid "unusable secret key" #~ msgstr "不可用的私鑰" #~ msgid "keyserver error" #~ msgstr "金鑰伺服器錯誤" #~ msgid "no card" #~ msgstr "沒有卡片" #~ msgid "no data" #~ msgstr "沒有資料" #~ msgid "ERROR: " #~ msgstr "錯誤: " #~ msgid "WARNING: " #~ msgstr "警告: " #~ msgid "... this is a bug (%s:%d:%s)\n" #~ msgstr "... 這是個瑕疵 (%s:%d:%s)\n" #~ msgid "WARNING: using insecure memory!\n" #~ msgstr "警告: 正在使用不安全的記憶體!\n" #~ msgid "please see http://www.gnupg.org/faq.html for more information\n" #~ msgstr "請參考 http://www.gnupg.org/faq.html 上進一步的資訊\n" #~ msgid "operation is not possible without initialized secure memory\n" #~ msgstr "尚未啟用安全的記憶體時, 不可能進行操作\n" #~ msgid "(you may have used the wrong program for this task)\n" #~ msgstr "(也許你選錯程式來做這件事了)\n" #~ msgid "can't put notation data into v3 (PGP 2.x style) signatures\n" #~ msgstr "無法在 v3 (PGP 2.x 型態) 的簽章內放入標記資料\n" #~ msgid "can't put notation data into v3 (PGP 2.x style) key signatures\n" #~ msgstr "無法在 v3 (PGP 2.x 型態) 的金鑰簽章內放入標記資料\n" #~ msgid "can't put a policy URL into v3 (PGP 2.x style) signatures\n" #~ msgstr "無法在 v3 (PGP 2.x 型態) 的簽章內放入原則 URL\n" #~ msgid "can't put a policy URL into v3 key (PGP 2.x style) signatures\n" #~ msgstr "無法在 v3 (PGP 2.x 型態) 的金鑰簽章內放入原則 URL\n" #~ msgid "" #~ "please see http://www.gnupg.org/why-not-idea.html for more information\n" #~ msgstr "請參考 http://www.gnupg.org/why-not-idea.html 取得更多資訊\n" #~ msgid "DSA requires the use of a 160 bit hash algorithm\n" #~ msgstr "DSA 要求使用 160 位元的雜湊演算法\n"