diff --git a/agent/gpg-agent.c b/agent/gpg-agent.c index 74c2108b1..0a9e903c4 100644 --- a/agent/gpg-agent.c +++ b/agent/gpg-agent.c @@ -1,3238 +1,3264 @@ /* gpg-agent.c - The GnuPG Agent * Copyright (C) 2000-2020 Free Software Foundation, Inc. * Copyright (C) 2000-2019 Werner Koch * Copyright (C) 2015-2020 g10 Code GmbH * * This file is part of GnuPG. * * GnuPG is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * GnuPG is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * SPDX-License-Identifier: GPL-3.0-or-later */ #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_W32_SYSTEM # ifndef WINVER # define WINVER 0x0500 /* Same as in common/sysutils.c */ # endif # ifdef HAVE_WINSOCK2_H # include # endif # include # include #else /*!HAVE_W32_SYSTEM*/ # include # include #endif /*!HAVE_W32_SYSTEM*/ #include #ifdef HAVE_SIGNAL_H # include #endif #include #define INCLUDED_BY_MAIN_MODULE 1 #define GNUPG_COMMON_NEED_AFLOCAL #include "agent.h" #include /* Malloc hooks and socket wrappers. */ #include "../common/i18n.h" #include "../common/sysutils.h" #include "../common/gc-opt-flags.h" #include "../common/exechelp.h" #include "../common/asshelp.h" +#include "../common/comopt.h" #include "../common/init.h" enum cmd_and_opt_values { aNull = 0, oCsh = 'c', oQuiet = 'q', oSh = 's', oVerbose = 'v', oNoVerbose = 500, aGPGConfList, aGPGConfTest, aUseStandardSocketP, oOptions, oDebug, oDebugAll, oDebugLevel, oDebugWait, oDebugQuickRandom, oDebugPinentry, oNoOptions, oHomedir, oNoDetach, oGrab, oNoGrab, oLogFile, oServer, oDaemon, oSupervised, oBatch, oPinentryProgram, oPinentryTouchFile, oPinentryInvisibleChar, oPinentryTimeout, oDisplay, oTTYname, oTTYtype, oLCctype, oLCmessages, oXauthority, oScdaemonProgram, oTpm2daemonProgram, oDefCacheTTL, oDefCacheTTLSSH, oMaxCacheTTL, oMaxCacheTTLSSH, oEnforcePassphraseConstraints, oMinPassphraseLen, oMinPassphraseNonalpha, oCheckPassphrasePattern, oMaxPassphraseDays, oEnablePassphraseHistory, oDisableExtendedKeyFormat, oEnableExtendedKeyFormat, oUseStandardSocket, oNoUseStandardSocket, oExtraSocket, oBrowserSocket, oFakedSystemTime, oIgnoreCacheForSigning, oAllowMarkTrusted, oNoAllowMarkTrusted, oAllowPresetPassphrase, oAllowLoopbackPinentry, oNoAllowLoopbackPinentry, oNoAllowExternalCache, oAllowEmacsPinentry, oKeepTTY, oKeepDISPLAY, oSSHSupport, oSSHFingerprintDigest, oPuttySupport, oDisableScdaemon, oDisableCheckOwnSocket, oS2KCount, oS2KCalibration, oAutoExpandSecmem, oListenBacklog, oWriteEnvFile, oNoop }; #ifndef ENAMETOOLONG # define ENAMETOOLONG EINVAL #endif static gpgrt_opt_t opts[] = { ARGPARSE_c (aGPGConfList, "gpgconf-list", "@"), ARGPARSE_c (aGPGConfTest, "gpgconf-test", "@"), ARGPARSE_c (aUseStandardSocketP, "use-standard-socket-p", "@"), ARGPARSE_header (NULL, N_("Options used for startup")), ARGPARSE_s_n (oDaemon, "daemon", N_("run in daemon mode (background)")), ARGPARSE_s_n (oServer, "server", N_("run in server mode (foreground)")), #ifndef HAVE_W32_SYSTEM ARGPARSE_s_n (oSupervised, "supervised", N_("run in supervised mode")), #endif ARGPARSE_s_n (oNoDetach, "no-detach", N_("do not detach from the console")), ARGPARSE_s_n (oSh, "sh", N_("sh-style command output")), ARGPARSE_s_n (oCsh, "csh", N_("csh-style command output")), ARGPARSE_s_s (oDisplay, "display", "@"), ARGPARSE_s_s (oTTYname, "ttyname", "@"), ARGPARSE_s_s (oTTYtype, "ttytype", "@"), ARGPARSE_s_s (oLCctype, "lc-ctype", "@"), ARGPARSE_s_s (oLCmessages, "lc-messages", "@"), ARGPARSE_s_s (oXauthority, "xauthority", "@"), ARGPARSE_s_s (oHomedir, "homedir", "@"), ARGPARSE_conffile (oOptions, "options", N_("|FILE|read options from FILE")), ARGPARSE_noconffile (oNoOptions, "no-options", "@"), ARGPARSE_header ("Monitor", N_("Options controlling the diagnostic output")), ARGPARSE_s_n (oVerbose, "verbose", N_("verbose")), ARGPARSE_s_n (oQuiet, "quiet", N_("be somewhat more quiet")), ARGPARSE_s_s (oDebug, "debug", "@"), ARGPARSE_s_n (oDebugAll, "debug-all", "@"), ARGPARSE_s_s (oDebugLevel, "debug-level", "@"), ARGPARSE_s_i (oDebugWait, "debug-wait", "@"), ARGPARSE_s_n (oDebugQuickRandom, "debug-quick-random", "@"), ARGPARSE_s_n (oDebugPinentry, "debug-pinentry", "@"), ARGPARSE_s_s (oLogFile, "log-file", /* */ N_("|FILE|write server mode logs to FILE")), ARGPARSE_header ("Configuration", N_("Options controlling the configuration")), ARGPARSE_s_n (oDisableScdaemon, "disable-scdaemon", /* */ N_("do not use the SCdaemon") ), ARGPARSE_s_s (oScdaemonProgram, "scdaemon-program", /* */ N_("|PGM|use PGM as the SCdaemon program") ), ARGPARSE_s_s (oTpm2daemonProgram, "tpm2daemon-program", /* */ N_("|PGM|use PGM as the tpm2daemon program") ), ARGPARSE_s_n (oDisableCheckOwnSocket, "disable-check-own-socket", "@"), ARGPARSE_s_s (oExtraSocket, "extra-socket", /* */ N_("|NAME|accept some commands via NAME")), ARGPARSE_s_s (oBrowserSocket, "browser-socket", "@"), ARGPARSE_s_n (oKeepTTY, "keep-tty", /* */ N_("ignore requests to change the TTY")), ARGPARSE_s_n (oKeepDISPLAY, "keep-display", /* */ N_("ignore requests to change the X display")), ARGPARSE_s_n (oSSHSupport, "enable-ssh-support", N_("enable ssh support")), ARGPARSE_s_s (oSSHFingerprintDigest, "ssh-fingerprint-digest", N_("|ALGO|use ALGO to show ssh fingerprints")), ARGPARSE_s_n (oPuttySupport, "enable-putty-support", #ifdef HAVE_W32_SYSTEM /* */ N_("enable putty support") #else /* */ "@" #endif ), ARGPARSE_s_n (oDisableExtendedKeyFormat, "disable-extended-key-format", "@"), ARGPARSE_s_n (oEnableExtendedKeyFormat, "enable-extended-key-format", "@"), ARGPARSE_s_i (oListenBacklog, "listen-backlog", "@"), ARGPARSE_op_u (oAutoExpandSecmem, "auto-expand-secmem", "@"), ARGPARSE_s_s (oFakedSystemTime, "faked-system-time", "@"), ARGPARSE_header ("Security", N_("Options controlling the security")), ARGPARSE_s_u (oDefCacheTTL, "default-cache-ttl", N_("|N|expire cached PINs after N seconds")), ARGPARSE_s_u (oDefCacheTTLSSH, "default-cache-ttl-ssh", /* */ N_("|N|expire SSH keys after N seconds")), ARGPARSE_s_u (oMaxCacheTTL, "max-cache-ttl", /* */ N_("|N|set maximum PIN cache lifetime to N seconds")), ARGPARSE_s_u (oMaxCacheTTLSSH, "max-cache-ttl-ssh", /* */ N_("|N|set maximum SSH key lifetime to N seconds")), ARGPARSE_s_n (oIgnoreCacheForSigning, "ignore-cache-for-signing", /* */ N_("do not use the PIN cache when signing")), ARGPARSE_s_n (oNoAllowExternalCache, "no-allow-external-cache", /* */ N_("disallow the use of an external password cache")), ARGPARSE_s_n (oNoAllowMarkTrusted, "no-allow-mark-trusted", /* */ N_("disallow clients to mark keys as \"trusted\"")), ARGPARSE_s_n (oAllowMarkTrusted, "allow-mark-trusted", "@"), ARGPARSE_s_n (oAllowPresetPassphrase, "allow-preset-passphrase", /* */ N_("allow presetting passphrase")), ARGPARSE_s_u (oS2KCount, "s2k-count", "@"), ARGPARSE_s_u (oS2KCalibration, "s2k-calibration", "@"), ARGPARSE_header ("Passphrase policy", N_("Options enforcing a passphrase policy")), ARGPARSE_s_n (oEnforcePassphraseConstraints, "enforce-passphrase-constraints", N_("do not allow bypassing the passphrase policy")), ARGPARSE_s_u (oMinPassphraseLen, "min-passphrase-len", N_("|N|set minimal required length for new passphrases to N")), ARGPARSE_s_u (oMinPassphraseNonalpha, "min-passphrase-nonalpha", N_("|N|require at least N non-alpha" " characters for a new passphrase")), ARGPARSE_s_s (oCheckPassphrasePattern, "check-passphrase-pattern", N_("|FILE|check new passphrases against pattern in FILE")), ARGPARSE_s_u (oMaxPassphraseDays, "max-passphrase-days", N_("|N|expire the passphrase after N days")), ARGPARSE_s_n (oEnablePassphraseHistory, "enable-passphrase-history", N_("do not allow the reuse of old passphrases")), ARGPARSE_header ("Pinentry", N_("Options controlling the PIN-Entry")), ARGPARSE_s_n (oBatch, "batch", N_("never use the PIN-entry")), ARGPARSE_s_n (oNoAllowLoopbackPinentry, "no-allow-loopback-pinentry", N_("disallow caller to override the pinentry")), ARGPARSE_s_n (oAllowLoopbackPinentry, "allow-loopback-pinentry", "@"), ARGPARSE_s_n (oGrab, "grab", N_("let PIN-Entry grab keyboard and mouse")), ARGPARSE_s_n (oNoGrab, "no-grab", "@"), ARGPARSE_s_s (oPinentryProgram, "pinentry-program", N_("|PGM|use PGM as the PIN-Entry program")), ARGPARSE_s_s (oPinentryTouchFile, "pinentry-touch-file", "@"), ARGPARSE_s_s (oPinentryInvisibleChar, "pinentry-invisible-char", "@"), ARGPARSE_s_u (oPinentryTimeout, "pinentry-timeout", N_("|N|set the Pinentry timeout to N seconds")), ARGPARSE_s_n (oAllowEmacsPinentry, "allow-emacs-pinentry", N_("allow passphrase to be prompted through Emacs")), /* Dummy options for backward compatibility. */ ARGPARSE_o_s (oWriteEnvFile, "write-env-file", "@"), ARGPARSE_s_n (oUseStandardSocket, "use-standard-socket", "@"), ARGPARSE_s_n (oNoUseStandardSocket, "no-use-standard-socket", "@"), /* Dummy options. */ ARGPARSE_end () /* End of list */ }; /* The list of supported debug flags. */ static struct debug_flags_s debug_flags [] = { { DBG_MPI_VALUE , "mpi" }, { DBG_CRYPTO_VALUE , "crypto" }, { DBG_MEMORY_VALUE , "memory" }, { DBG_CACHE_VALUE , "cache" }, { DBG_MEMSTAT_VALUE, "memstat" }, { DBG_HASHING_VALUE, "hashing" }, { DBG_IPC_VALUE , "ipc" }, { 77, NULL } /* 77 := Do not exit on "help" or "?". */ }; #define DEFAULT_CACHE_TTL (10*60) /* 10 minutes */ #define DEFAULT_CACHE_TTL_SSH (30*60) /* 30 minutes */ #define MAX_CACHE_TTL (120*60) /* 2 hours */ #define MAX_CACHE_TTL_SSH (120*60) /* 2 hours */ #define MIN_PASSPHRASE_LEN (8) #define MIN_PASSPHRASE_NONALPHA (1) #define MAX_PASSPHRASE_DAYS (0) /* The timer tick used for housekeeping stuff. Note that on Windows * we use a SetWaitableTimer seems to signal earlier than about 2 * seconds. Thus we use 4 seconds on all platforms except for * Windowsce. CHECK_OWN_SOCKET_INTERVAL defines how often we check * our own socket in standard socket mode. If that value is 0 we * don't check at all. All values are in seconds. */ #if defined(HAVE_W32CE_SYSTEM) # define TIMERTICK_INTERVAL (60) # define CHECK_OWN_SOCKET_INTERVAL (0) /* Never */ #else # define TIMERTICK_INTERVAL (4) # define CHECK_OWN_SOCKET_INTERVAL (60) #endif /* Flag indicating that the ssh-agent subsystem has been enabled. */ static int ssh_support; #ifdef HAVE_W32_SYSTEM /* Flag indicating that support for Putty has been enabled. */ static int putty_support; /* A magic value used with WM_COPYDATA. */ #define PUTTY_IPC_MAGIC 0x804e50ba /* To avoid surprises we limit the size of the mapped IPC file to this value. Putty currently (0.62) uses 8k, thus 16k should be enough for the foreseeable future. */ #define PUTTY_IPC_MAXLEN 16384 #endif /*HAVE_W32_SYSTEM*/ /* The list of open file descriptors at startup. Note that this list * has been allocated using the standard malloc. */ #ifndef HAVE_W32_SYSTEM static int *startup_fd_list; #endif /* The signal mask at startup and a flag telling whether it is valid. */ #ifdef HAVE_SIGPROCMASK static sigset_t startup_signal_mask; static int startup_signal_mask_valid; #endif /* Flag to indicate that a shutdown was requested. */ static int shutdown_pending; /* Counter for the currently running own socket checks. */ static int check_own_socket_running; /* Flags to indicate that check_own_socket shall not be called. */ static int disable_check_own_socket; /* Flag indicating that we are in supervised mode. */ static int is_supervised; /* Flag to inhibit socket removal in cleanup. */ static int inhibit_socket_removal; /* It is possible that we are currently running under setuid permissions */ static int maybe_setuid = 1; /* Name of the communication socket used for native gpg-agent requests. The second variable is either NULL or a malloced string with the real socket name in case it has been redirected. */ static char *socket_name; static char *redir_socket_name; /* Name of the optional extra socket used for native gpg-agent requests. */ static char *socket_name_extra; static char *redir_socket_name_extra; /* Name of the optional browser socket used for native gpg-agent requests. */ static char *socket_name_browser; static char *redir_socket_name_browser; /* Name of the communication socket used for ssh-agent protocol. */ static char *socket_name_ssh; static char *redir_socket_name_ssh; /* We need to keep track of the server's nonces (these are dummies for POSIX systems). */ static assuan_sock_nonce_t socket_nonce; static assuan_sock_nonce_t socket_nonce_extra; static assuan_sock_nonce_t socket_nonce_browser; static assuan_sock_nonce_t socket_nonce_ssh; /* Value for the listen() backlog argument. We use the same value for * all sockets - 64 is on current Linux half of the default maximum. * Let's try this as default. Change at runtime with --listen-backlog. */ static int listen_backlog = 64; /* Default values for options passed to the pinentry. */ static char *default_display; static char *default_ttyname; static char *default_ttytype; static char *default_lc_ctype; static char *default_lc_messages; static char *default_xauthority; /* Name of a config file which was last read on startup or if missing * the name of the standard config file. Any value here enabled the * rereading of the standard config files on SIGHUP. */ static char *config_filename; /* Helper to implement --debug-level */ static const char *debug_level; /* Keep track of the current log file so that we can avoid updating the log file after a SIGHUP if it didn't changed. Malloced. */ static char *current_logfile; /* The handle_tick() function may test whether a parent is still * running. We record the PID of the parent here or -1 if it should * be watched. */ static pid_t parent_pid = (pid_t)(-1); /* This flag is true if the inotify mechanism for detecting the * removal of the homedir is active. This flag is used to disable the * alternative but portable stat based check. */ static int have_homedir_inotify; /* Depending on how gpg-agent was started, the homedir inotify watch * may not be reliable. This flag is set if we assume that inotify * works reliable. */ static int reliable_homedir_inotify; /* Number of active connections. */ static int active_connections; /* This object is used to dispatch progress messages from Libgcrypt to * the right thread. Given that we will have at max only a few dozen * connections at a time, using a linked list is the easiest way to * handle this. */ struct progress_dispatch_s { struct progress_dispatch_s *next; /* The control object of the connection. If this is NULL no * connection is associated with this item and it is free for reuse * by new connections. */ ctrl_t ctrl; /* The thread id of (npth_self) of the connection. */ npth_t tid; /* The callback set by the connection. This is similar to the * Libgcrypt callback but with the control object passed as the * first argument. */ void (*cb)(ctrl_t ctrl, const char *what, int printchar, int current, int total); }; struct progress_dispatch_s *progress_dispatch_list; /* Local prototypes. */ static char *create_socket_name (char *standard_name, int with_homedir); static gnupg_fd_t create_server_socket (char *name, int primary, int cygwin, char **r_redir_name, assuan_sock_nonce_t *nonce); static void create_directories (void); static void agent_libgcrypt_progress_cb (void *data, const char *what, int printchar, int current, int total); static void agent_init_default_ctrl (ctrl_t ctrl); static void agent_deinit_default_ctrl (ctrl_t ctrl); static void handle_connections (gnupg_fd_t listen_fd, gnupg_fd_t listen_fd_extra, gnupg_fd_t listen_fd_browser, gnupg_fd_t listen_fd_ssh); static void check_own_socket (void); static int check_for_running_agent (int silent); /* Pth wrapper function definitions. */ ASSUAN_SYSTEM_NPTH_IMPL; /* Functions. */ /* Allocate a string describing a library version by calling a GETFNC. This function is expected to be called only once. GETFNC is expected to have a semantic like gcry_check_version (). */ static char * make_libversion (const char *libname, const char *(*getfnc)(const char*)) { const char *s; char *result; if (maybe_setuid) { gcry_control (GCRYCTL_INIT_SECMEM, 0, 0); /* Drop setuid. */ maybe_setuid = 0; } s = getfnc (NULL); result = xmalloc (strlen (libname) + 1 + strlen (s) + 1); strcpy (stpcpy (stpcpy (result, libname), " "), s); return result; } /* Return strings describing this program. The case values are described in common/argparse.c:strusage. The values here override the default values given by strusage. */ static const char * my_strusage (int level) { static char *ver_gcry; const char *p; switch (level) { case 9: p = "GPL-3.0-or-later"; break; case 11: p = "@GPG_AGENT@ (@GNUPG@)"; break; case 13: p = VERSION; break; case 14: p = GNUPG_DEF_COPYRIGHT_LINE; break; case 17: p = PRINTABLE_OS_NAME; break; /* TRANSLATORS: @EMAIL@ will get replaced by the actual bug reporting address. This is so that we can change the reporting address without breaking the translations. */ case 19: p = _("Please report bugs to <@EMAIL@>.\n"); break; case 20: if (!ver_gcry) ver_gcry = make_libversion ("libgcrypt", gcry_check_version); p = ver_gcry; break; case 1: case 40: p = _("Usage: @GPG_AGENT@ [options] (-h for help)"); break; case 41: p = _("Syntax: @GPG_AGENT@ [options] [command [args]]\n" "Secret key management for @GNUPG@\n"); break; default: p = NULL; } return p; } /* Setup the debugging. With the global variable DEBUG_LEVEL set to NULL only the active debug flags are propagated to the subsystems. With DEBUG_LEVEL set, a specific set of debug flags is set; thus overriding all flags already set. Note that we don't fail here, because it is important to keep gpg-agent running even after re-reading the options due to a SIGHUP. */ static void set_debug (void) { int numok = (debug_level && digitp (debug_level)); int numlvl = numok? atoi (debug_level) : 0; if (!debug_level) ; else if (!strcmp (debug_level, "none") || (numok && numlvl < 1)) opt.debug = 0; else if (!strcmp (debug_level, "basic") || (numok && numlvl <= 2)) opt.debug = DBG_IPC_VALUE; else if (!strcmp (debug_level, "advanced") || (numok && numlvl <= 5)) opt.debug = DBG_IPC_VALUE; else if (!strcmp (debug_level, "expert") || (numok && numlvl <= 8)) opt.debug = (DBG_IPC_VALUE | DBG_CACHE_VALUE); else if (!strcmp (debug_level, "guru") || numok) { opt.debug = ~0; /* Unless the "guru" string has been used we don't want to allow hashing debugging. The rationale is that people tend to select the highest debug value and would then clutter their disk with debug files which may reveal confidential data. */ if (numok) opt.debug &= ~(DBG_HASHING_VALUE); } else { log_error (_("invalid debug-level '%s' given\n"), debug_level); opt.debug = 0; /* Reset debugging, so that prior debug statements won't have an undesired effect. */ } if (opt.debug && !opt.verbose) opt.verbose = 1; if (opt.debug && opt.quiet) opt.quiet = 0; if (opt.debug & DBG_MPI_VALUE) gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 2); if (opt.debug & DBG_CRYPTO_VALUE ) gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 1); gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose); if (opt.debug) parse_debug_flag (NULL, &opt.debug, debug_flags); } /* Helper for cleanup to remove one socket with NAME. REDIR_NAME is the corresponding real name if the socket has been redirected. */ static void remove_socket (char *name, char *redir_name) { if (name && *name) { if (redir_name) name = redir_name; gnupg_remove (name); *name = 0; } } /* Discover which inherited file descriptors correspond to which * services/sockets offered by gpg-agent, using the LISTEN_FDS and * LISTEN_FDNAMES convention. The understood labels are "ssh", * "extra", and "browser". "std" or other labels will be interpreted * as the standard socket. * * This function is designed to log errors when the expected file * descriptors don't make sense, but to do its best to continue to * work even in the face of minor misconfigurations. * * For more information on the LISTEN_FDS convention, see * sd_listen_fds(3) on certain Linux distributions. */ #ifndef HAVE_W32_SYSTEM static void map_supervised_sockets (gnupg_fd_t *r_fd, gnupg_fd_t *r_fd_extra, gnupg_fd_t *r_fd_browser, gnupg_fd_t *r_fd_ssh) { struct { const char *label; int **fdaddr; char **nameaddr; } tbl[] = { { "ssh", &r_fd_ssh, &socket_name_ssh }, { "browser", &r_fd_browser, &socket_name_browser }, { "extra", &r_fd_extra, &socket_name_extra }, { "std", &r_fd, &socket_name } /* (Must be the last item.) */ }; const char *envvar; char **fdnames; int nfdnames; int fd_count; *r_fd = *r_fd_extra = *r_fd_browser = *r_fd_ssh = -1; /* Print a warning if LISTEN_PID does not match outr pid. */ envvar = getenv ("LISTEN_PID"); if (!envvar) log_error ("no LISTEN_PID environment variable found in " "--supervised mode (ignoring)\n"); else if (strtoul (envvar, NULL, 10) != (unsigned long)getpid ()) log_error ("environment variable LISTEN_PID (%lu) does not match" " our pid (%lu) in --supervised mode (ignoring)\n", (unsigned long)strtoul (envvar, NULL, 10), (unsigned long)getpid ()); /* Parse LISTEN_FDNAMES into the array FDNAMES. */ envvar = getenv ("LISTEN_FDNAMES"); if (envvar) { fdnames = strtokenize (envvar, ":"); if (!fdnames) { log_error ("strtokenize failed: %s\n", gpg_strerror (gpg_error_from_syserror ())); agent_exit (1); } for (nfdnames=0; fdnames[nfdnames]; nfdnames++) ; } else { fdnames = NULL; nfdnames = 0; } /* Parse LISTEN_FDS into fd_count or provide a replacement. */ envvar = getenv ("LISTEN_FDS"); if (envvar) fd_count = atoi (envvar); else if (fdnames) { log_error ("no LISTEN_FDS environment variable found in --supervised" " mode (relying on LISTEN_FDNAMES instead)\n"); fd_count = nfdnames; } else { log_error ("no LISTEN_FDS or LISTEN_FDNAMES environment variables " "found in --supervised mode" " (assuming 1 active descriptor)\n"); fd_count = 1; } if (fd_count < 1) { log_error ("--supervised mode expects at least one file descriptor" " (was told %d, carrying on as though it were 1)\n", fd_count); fd_count = 1; } /* Assign the descriptors to the return values. */ if (!fdnames) { struct stat statbuf; if (fd_count != 1) log_error ("no LISTEN_FDNAMES and LISTEN_FDS (%d) != 1" " in --supervised mode." " (ignoring all sockets but the first one)\n", fd_count); if (fstat (3, &statbuf) == -1 && errno ==EBADF) log_fatal ("file descriptor 3 must be valid in --supervised mode" " if LISTEN_FDNAMES is not set\n"); *r_fd = 3; socket_name = gnupg_get_socket_name (3); } else if (fd_count != nfdnames) { log_fatal ("number of items in LISTEN_FDNAMES (%d) does not match " "LISTEN_FDS (%d) in --supervised mode\n", nfdnames, fd_count); } else { int i, j, fd; char *name; for (i = 0; i < nfdnames; i++) { for (j = 0; j < DIM (tbl); j++) { if (!strcmp (fdnames[i], tbl[j].label) || j == DIM(tbl)-1) { fd = 3 + i; if (**tbl[j].fdaddr == -1) { name = gnupg_get_socket_name (fd); if (name) { **tbl[j].fdaddr = fd; *tbl[j].nameaddr = name; log_info ("using fd %d for %s socket (%s)\n", fd, tbl[j].label, name); } else { log_error ("cannot listen on fd %d for %s socket\n", fd, tbl[j].label); close (fd); } } else { log_error ("cannot listen on more than one %s socket\n", tbl[j].label); close (fd); } break; } } } } xfree (fdnames); } #endif /*!HAVE_W32_SYSTEM*/ /* Cleanup code for this program. This is either called has an atexit handler or directly. */ static void cleanup (void) { static int done; if (done) return; done = 1; deinitialize_module_cache (); if (!is_supervised && !inhibit_socket_removal) { remove_socket (socket_name, redir_socket_name); if (opt.extra_socket > 1) remove_socket (socket_name_extra, redir_socket_name_extra); if (opt.browser_socket > 1) remove_socket (socket_name_browser, redir_socket_name_browser); remove_socket (socket_name_ssh, redir_socket_name_ssh); } } /* Handle options which are allowed to be reset after program start. Return true when the current option in PARGS could be handled and false if not. As a special feature, passing a value of NULL for PARGS, resets the options to the default. REREAD should be set true if it is not the initial option parsing. */ static int parse_rereadable_options (gpgrt_argparse_t *pargs, int reread) { int i; if (!pargs) { /* reset mode */ opt.quiet = 0; opt.verbose = 0; opt.debug = 0; opt.no_grab = 1; opt.debug_pinentry = 0; opt.pinentry_program = NULL; opt.pinentry_touch_file = NULL; xfree (opt.pinentry_invisible_char); opt.pinentry_invisible_char = NULL; opt.pinentry_timeout = 0; memset (opt.daemon_program, 0, sizeof opt.daemon_program); opt.def_cache_ttl = DEFAULT_CACHE_TTL; opt.def_cache_ttl_ssh = DEFAULT_CACHE_TTL_SSH; opt.max_cache_ttl = MAX_CACHE_TTL; opt.max_cache_ttl_ssh = MAX_CACHE_TTL_SSH; opt.enforce_passphrase_constraints = 0; opt.min_passphrase_len = MIN_PASSPHRASE_LEN; opt.min_passphrase_nonalpha = MIN_PASSPHRASE_NONALPHA; opt.check_passphrase_pattern = NULL; opt.max_passphrase_days = MAX_PASSPHRASE_DAYS; opt.enable_passphrase_history = 0; opt.enable_extended_key_format = 1; opt.ignore_cache_for_signing = 0; opt.allow_mark_trusted = 1; opt.allow_external_cache = 1; opt.allow_loopback_pinentry = 1; opt.allow_emacs_pinentry = 0; memset (opt.disable_daemon, 0, sizeof opt.disable_daemon); disable_check_own_socket = 0; /* Note: When changing the next line, change also gpgconf_list. */ opt.ssh_fingerprint_digest = GCRY_MD_MD5; opt.s2k_count = 0; set_s2k_calibration_time (0); /* Set to default. */ return 1; } switch (pargs->r_opt) { case oQuiet: opt.quiet = 1; break; case oVerbose: opt.verbose++; break; case oDebug: parse_debug_flag (pargs->r.ret_str, &opt.debug, debug_flags); break; case oDebugAll: opt.debug = ~0; break; case oDebugLevel: debug_level = pargs->r.ret_str; break; case oDebugPinentry: opt.debug_pinentry = 1; break; case oLogFile: if (!reread) return 0; /* not handled */ if (!current_logfile || !pargs->r.ret_str || strcmp (current_logfile, pargs->r.ret_str)) { log_set_file (pargs->r.ret_str); xfree (current_logfile); current_logfile = xtrystrdup (pargs->r.ret_str); } break; case oNoGrab: opt.no_grab |= 1; break; case oGrab: opt.no_grab |= 2; break; case oPinentryProgram: opt.pinentry_program = pargs->r.ret_str; break; case oPinentryTouchFile: opt.pinentry_touch_file = pargs->r.ret_str; break; case oPinentryInvisibleChar: xfree (opt.pinentry_invisible_char); opt.pinentry_invisible_char = xtrystrdup (pargs->r.ret_str); break; break; case oPinentryTimeout: opt.pinentry_timeout = pargs->r.ret_ulong; break; case oTpm2daemonProgram: opt.daemon_program[DAEMON_TPM2D] = pargs->r.ret_str; break; case oScdaemonProgram: opt.daemon_program[DAEMON_SCD] = pargs->r.ret_str; break; case oDisableScdaemon: opt.disable_daemon[DAEMON_SCD] = 1; break; case oDisableCheckOwnSocket: disable_check_own_socket = 1; break; case oDefCacheTTL: opt.def_cache_ttl = pargs->r.ret_ulong; break; case oDefCacheTTLSSH: opt.def_cache_ttl_ssh = pargs->r.ret_ulong; break; case oMaxCacheTTL: opt.max_cache_ttl = pargs->r.ret_ulong; break; case oMaxCacheTTLSSH: opt.max_cache_ttl_ssh = pargs->r.ret_ulong; break; case oEnforcePassphraseConstraints: opt.enforce_passphrase_constraints=1; break; case oMinPassphraseLen: opt.min_passphrase_len = pargs->r.ret_ulong; break; case oMinPassphraseNonalpha: opt.min_passphrase_nonalpha = pargs->r.ret_ulong; break; case oCheckPassphrasePattern: opt.check_passphrase_pattern = pargs->r.ret_str; break; case oMaxPassphraseDays: opt.max_passphrase_days = pargs->r.ret_ulong; break; case oEnablePassphraseHistory: opt.enable_passphrase_history = 1; break; case oEnableExtendedKeyFormat: opt.enable_extended_key_format = 2; break; case oDisableExtendedKeyFormat: if (opt.enable_extended_key_format != 2) opt.enable_extended_key_format = 0; break; case oIgnoreCacheForSigning: opt.ignore_cache_for_signing = 1; break; case oAllowMarkTrusted: opt.allow_mark_trusted = 1; break; case oNoAllowMarkTrusted: opt.allow_mark_trusted = 0; break; case oAllowPresetPassphrase: opt.allow_preset_passphrase = 1; break; case oAllowLoopbackPinentry: opt.allow_loopback_pinentry = 1; break; case oNoAllowLoopbackPinentry: opt.allow_loopback_pinentry = 0; break; case oNoAllowExternalCache: opt.allow_external_cache = 0; break; case oAllowEmacsPinentry: opt.allow_emacs_pinentry = 1; break; case oSSHFingerprintDigest: i = gcry_md_map_name (pargs->r.ret_str); if (!i) log_error (_("selected digest algorithm is invalid\n")); else opt.ssh_fingerprint_digest = i; break; case oS2KCount: opt.s2k_count = pargs->r.ret_ulong; break; case oS2KCalibration: set_s2k_calibration_time (pargs->r.ret_ulong); break; case oNoop: break; default: return 0; /* not handled */ } return 1; /* handled */ } /* Fixup some options after all have been processed. */ static void finalize_rereadable_options (void) { /* Hack to allow --grab to override --no-grab. */ if ((opt.no_grab & 2)) opt.no_grab = 0; } static void thread_init_once (void) { static int npth_initialized = 0; if (!npth_initialized) { npth_initialized++; npth_init (); } gpgrt_set_syscall_clamp (npth_unprotect, npth_protect); /* Now that we have set the syscall clamp we need to tell Libgcrypt * that it should get them from libgpg-error. Note that Libgcrypt * has already been initialized but at that point nPth was not * initialized and thus Libgcrypt could not set its system call * clamp. */ gcry_control (GCRYCTL_REINIT_SYSCALL_CLAMP, 0, 0); } static void initialize_modules (void) { thread_init_once (); assuan_set_system_hooks (ASSUAN_SYSTEM_NPTH); initialize_module_cache (); initialize_module_call_pinentry (); initialize_module_daemon (); initialize_module_trustlist (); } /* The main entry point. */ int main (int argc, char **argv) { gpgrt_argparse_t pargs; int orig_argc; char **orig_argv; char *last_configname = NULL; const char *configname = NULL; int debug_argparser = 0; const char *shell; int pipe_server = 0; int is_daemon = 0; int nodetach = 0; int csh_style = 0; char *logfile = NULL; int debug_wait = 0; int gpgconf_list = 0; gpg_error_t err; struct assuan_malloc_hooks malloc_hooks; early_system_init (); /* Before we do anything else we save the list of currently open file descriptors and the signal mask. This info is required to do the exec call properly. We don't need it on Windows. */ #ifndef HAVE_W32_SYSTEM startup_fd_list = get_all_open_fds (); #endif /*!HAVE_W32_SYSTEM*/ #ifdef HAVE_SIGPROCMASK if (!sigprocmask (SIG_UNBLOCK, NULL, &startup_signal_mask)) startup_signal_mask_valid = 1; #endif /*HAVE_SIGPROCMASK*/ /* Set program name etc. */ gpgrt_set_strusage (my_strusage); gcry_control (GCRYCTL_SUSPEND_SECMEM_WARN); /* Please note that we may running SUID(ROOT), so be very CAREFUL when adding any stuff between here and the call to INIT_SECMEM() somewhere after the option parsing */ log_set_prefix (GPG_AGENT_NAME, GPGRT_LOG_WITH_PREFIX|GPGRT_LOG_WITH_PID); /* Make sure that our subsystems are ready. */ i18n_init (); init_common_subsystems (&argc, &argv); malloc_hooks.malloc = gcry_malloc; malloc_hooks.realloc = gcry_realloc; malloc_hooks.free = gcry_free; assuan_set_malloc_hooks (&malloc_hooks); assuan_set_gpg_err_source (GPG_ERR_SOURCE_DEFAULT); assuan_sock_init (); assuan_sock_set_system_hooks (ASSUAN_SYSTEM_NPTH); setup_libassuan_logging (&opt.debug, NULL); setup_libgcrypt_logging (); gcry_control (GCRYCTL_USE_SECURE_RNDPOOL); gcry_set_progress_handler (agent_libgcrypt_progress_cb, NULL); disable_core_dumps (); /* Set default options. */ parse_rereadable_options (NULL, 0); /* Reset them to default values. */ shell = getenv ("SHELL"); if (shell && strlen (shell) >= 3 && !strcmp (shell+strlen (shell)-3, "csh") ) csh_style = 1; /* Record some of the original environment strings. */ { const char *s; int idx; static const char *names[] = { "DISPLAY", "TERM", "XAUTHORITY", "PINENTRY_USER_DATA", NULL }; err = 0; opt.startup_env = session_env_new (); if (!opt.startup_env) err = gpg_error_from_syserror (); for (idx=0; !err && names[idx]; idx++) { s = getenv (names[idx]); if (s) err = session_env_setenv (opt.startup_env, names[idx], s); } if (!err) { s = gnupg_ttyname (0); if (s) err = session_env_setenv (opt.startup_env, "GPG_TTY", s); } if (err) log_fatal ("error recording startup environment: %s\n", gpg_strerror (err)); /* Fixme: Better use the locale function here. */ opt.startup_lc_ctype = getenv ("LC_CTYPE"); if (opt.startup_lc_ctype) opt.startup_lc_ctype = xstrdup (opt.startup_lc_ctype); opt.startup_lc_messages = getenv ("LC_MESSAGES"); if (opt.startup_lc_messages) opt.startup_lc_messages = xstrdup (opt.startup_lc_messages); } /* Check whether we have a config file on the commandline */ orig_argc = argc; orig_argv = argv; pargs.argc = &argc; pargs.argv = &argv; pargs.flags= (ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); while (gpgrt_argparse (NULL, &pargs, opts)) { switch (pargs.r_opt) { case oDebug: case oDebugAll: debug_argparser++; break; case oHomedir: gnupg_set_homedir (pargs.r.ret_str); break; case oDebugQuickRandom: gcry_control (GCRYCTL_ENABLE_QUICK_RANDOM, 0); break; } } /* Reset the flags. */ pargs.flags &= ~(ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); /* Initialize the secure memory. */ gcry_control (GCRYCTL_INIT_SECMEM, SECMEM_BUFFER_SIZE, 0); maybe_setuid = 0; /* * Now we are now working under our real uid */ /* The configuraton directories for use by gpgrt_argparser. */ gpgrt_set_confdir (GPGRT_CONFDIR_SYS, gnupg_sysconfdir ()); gpgrt_set_confdir (GPGRT_CONFDIR_USER, gnupg_homedir ()); argc = orig_argc; argv = orig_argv; pargs.argc = &argc; pargs.argv = &argv; /* We are re-using the struct, thus the reset flag. We OR the * flags so that the internal intialized flag won't be cleared. */ pargs.flags |= (ARGPARSE_FLAG_RESET | ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_SYS | ARGPARSE_FLAG_USER); while (gpgrt_argparser (&pargs, opts, GPG_AGENT_NAME EXTSEP_S "conf")) { if (pargs.r_opt == ARGPARSE_CONFFILE) { if (debug_argparser) log_info (_("reading options from '%s'\n"), pargs.r_type? pargs.r.ret_str: "[cmdline]"); if (pargs.r_type) { xfree (last_configname); last_configname = xstrdup (pargs.r.ret_str); configname = last_configname; } else configname = NULL; continue; } if (parse_rereadable_options (&pargs, 0)) continue; /* Already handled */ switch (pargs.r_opt) { case aGPGConfList: gpgconf_list = 1; break; case aGPGConfTest: gpgconf_list = 2; break; case aUseStandardSocketP: gpgconf_list = 3; break; case oBatch: opt.batch=1; break; case oDebugWait: debug_wait = pargs.r.ret_int; break; case oNoVerbose: opt.verbose = 0; break; case oHomedir: gnupg_set_homedir (pargs.r.ret_str); break; case oNoDetach: nodetach = 1; break; case oLogFile: logfile = pargs.r.ret_str; break; case oCsh: csh_style = 1; break; case oSh: csh_style = 0; break; case oServer: pipe_server = 1; break; case oDaemon: is_daemon = 1; break; case oSupervised: is_supervised = 1; break; case oDisplay: default_display = xstrdup (pargs.r.ret_str); break; case oTTYname: default_ttyname = xstrdup (pargs.r.ret_str); break; case oTTYtype: default_ttytype = xstrdup (pargs.r.ret_str); break; case oLCctype: default_lc_ctype = xstrdup (pargs.r.ret_str); break; case oLCmessages: default_lc_messages = xstrdup (pargs.r.ret_str); break; case oXauthority: default_xauthority = xstrdup (pargs.r.ret_str); break; case oUseStandardSocket: case oNoUseStandardSocket: obsolete_option (configname, pargs.lineno, "use-standard-socket"); break; case oFakedSystemTime: { time_t faked_time = isotime2epoch (pargs.r.ret_str); if (faked_time == (time_t)(-1)) faked_time = (time_t)strtoul (pargs.r.ret_str, NULL, 10); gnupg_set_time (faked_time, 0); } break; case oKeepTTY: opt.keep_tty = 1; break; case oKeepDISPLAY: opt.keep_display = 1; break; case oSSHSupport: ssh_support = 1; break; case oPuttySupport: # ifdef HAVE_W32_SYSTEM putty_support = 1; # endif break; case oExtraSocket: opt.extra_socket = 1; /* (1 = points into argv) */ socket_name_extra = pargs.r.ret_str; break; case oBrowserSocket: opt.browser_socket = 1; /* (1 = points into argv) */ socket_name_browser = pargs.r.ret_str; break; case oAutoExpandSecmem: /* Try to enable this option. It will officially only be * supported by Libgcrypt 1.9 but 1.8.2 already supports it * on the quiet and thus we use the numeric value value. */ gcry_control (78 /*GCRYCTL_AUTO_EXPAND_SECMEM*/, (unsigned int)pargs.r.ret_ulong, 0); break; case oListenBacklog: listen_backlog = pargs.r.ret_int; break; case oDebugQuickRandom: /* Only used by the first stage command line parser. */ break; case oWriteEnvFile: obsolete_option (configname, pargs.lineno, "write-env-file"); break; default: if (configname) pargs.err = ARGPARSE_PRINT_WARNING; else pargs.err = ARGPARSE_PRINT_ERROR; break; } } gpgrt_argparse (NULL, &pargs, NULL); /* Release internal state. */ if (!last_configname) config_filename = gpgrt_fnameconcat (gnupg_homedir (), GPG_AGENT_NAME EXTSEP_S "conf", NULL); else { config_filename = last_configname; last_configname = NULL; } if (log_get_errorcount(0)) exit(2); finalize_rereadable_options (); + /* Get a default log file from common.conf. */ + if (!logfile && !parse_comopt (GNUPG_MODULE_NAME_AGENT, debug_argparser)) + { + logfile = comopt.logfile; + comopt.logfile = NULL; + } + /* Print a warning if an argument looks like an option. */ if (!opt.quiet && !(pargs.flags & ARGPARSE_FLAG_STOP_SEEN)) { int i; for (i=0; i < argc; i++) if (argv[i][0] == '-' && argv[i][1] == '-') log_info (_("Note: '%s' is not considered an option\n"), argv[i]); } #ifdef ENABLE_NLS /* gpg-agent usually does not output any messages because it runs in the background. For log files it is acceptable to have messages always encoded in utf-8. We switch here to utf-8, so that commands like --help still give native messages. It is far easier to switch only once instead of for every message and it actually helps when more then one thread is active (avoids an extra copy step). */ bind_textdomain_codeset (PACKAGE_GT, "UTF-8"); #endif if (!pipe_server && !is_daemon && !gpgconf_list && !is_supervised) { /* We have been called without any command and thus we merely check whether an agent is already running. We do this right here so that we don't clobber a logfile with this check but print the status directly to stderr. */ opt.debug = 0; set_debug (); check_for_running_agent (0); agent_exit (0); } if (is_supervised) ; else if (!opt.extra_socket) opt.extra_socket = 1; else if (socket_name_extra && (!strcmp (socket_name_extra, "none") || !strcmp (socket_name_extra, "/dev/null"))) { /* User requested not to create this socket. */ opt.extra_socket = 0; socket_name_extra = NULL; } if (is_supervised) ; else if (!opt.browser_socket) opt.browser_socket = 1; else if (socket_name_browser && (!strcmp (socket_name_browser, "none") || !strcmp (socket_name_browser, "/dev/null"))) { /* User requested not to create this socket. */ opt.browser_socket = 0; socket_name_browser = NULL; } set_debug (); if (atexit (cleanup)) { log_error ("atexit failed\n"); cleanup (); exit (1); } /* Try to create missing directories. */ if (!gpgconf_list) create_directories (); if (debug_wait && pipe_server) { thread_init_once (); log_debug ("waiting for debugger - my pid is %u .....\n", (unsigned int)getpid()); gnupg_sleep (debug_wait); log_debug ("... okay\n"); } if (gpgconf_list == 3) { /* We now use the standard socket always - return true for backward compatibility. */ agent_exit (0); } else if (gpgconf_list == 2) agent_exit (0); else if (gpgconf_list) { /* Note: If an option is runtime changeable, please set the * respective flag in the gpgconf-comp.c table. */ es_printf ("debug-level:%lu:\"none:\n", GC_OPT_FLAG_DEFAULT); es_printf ("default-cache-ttl:%lu:%d:\n", GC_OPT_FLAG_DEFAULT, DEFAULT_CACHE_TTL ); es_printf ("default-cache-ttl-ssh:%lu:%d:\n", GC_OPT_FLAG_DEFAULT, DEFAULT_CACHE_TTL_SSH ); es_printf ("max-cache-ttl:%lu:%d:\n", GC_OPT_FLAG_DEFAULT, MAX_CACHE_TTL ); es_printf ("max-cache-ttl-ssh:%lu:%d:\n", GC_OPT_FLAG_DEFAULT, MAX_CACHE_TTL_SSH ); es_printf ("min-passphrase-len:%lu:%d:\n", GC_OPT_FLAG_DEFAULT, MIN_PASSPHRASE_LEN ); es_printf ("min-passphrase-nonalpha:%lu:%d:\n", GC_OPT_FLAG_DEFAULT, MIN_PASSPHRASE_NONALPHA); es_printf ("check-passphrase-pattern:%lu:\n", GC_OPT_FLAG_DEFAULT); es_printf ("max-passphrase-days:%lu:%d:\n", GC_OPT_FLAG_DEFAULT, MAX_PASSPHRASE_DAYS); es_printf ("ssh-fingerprint-digest:%lu:\"%s:\n", GC_OPT_FLAG_DEFAULT, "md5"); agent_exit (0); } /* Now start with logging to a file if this is desired. */ if (logfile) { log_set_file (logfile); log_set_prefix (NULL, (GPGRT_LOG_WITH_PREFIX | GPGRT_LOG_WITH_TIME | GPGRT_LOG_WITH_PID)); current_logfile = xstrdup (logfile); } /* Make sure that we have a default ttyname. */ if (!default_ttyname && gnupg_ttyname (1)) default_ttyname = xstrdup (gnupg_ttyname (1)); if (!default_ttytype && getenv ("TERM")) default_ttytype = xstrdup (getenv ("TERM")); if (pipe_server) { /* This is the simple pipe based server */ ctrl_t ctrl; initialize_modules (); ctrl = xtrycalloc (1, sizeof *ctrl); if (!ctrl) { log_error ("error allocating connection control data: %s\n", strerror (errno) ); agent_exit (1); } ctrl->session_env = session_env_new (); if (!ctrl->session_env) { log_error ("error allocating session environment block: %s\n", strerror (errno) ); xfree (ctrl); agent_exit (1); } agent_init_default_ctrl (ctrl); start_command_handler (ctrl, GNUPG_INVALID_FD, GNUPG_INVALID_FD); agent_deinit_default_ctrl (ctrl); xfree (ctrl); } else if (is_supervised) { #ifndef HAVE_W32_SYSTEM gnupg_fd_t fd, fd_extra, fd_browser, fd_ssh; initialize_modules (); /* when supervised and sending logs to stderr, the process supervisor should handle log entry metadata (pid, name, timestamp) */ if (!logfile) log_set_prefix (NULL, 0); log_info ("%s %s starting in supervised mode.\n", gpgrt_strusage(11), gpgrt_strusage(13) ); /* See below in "regular server mode" on why we remove certain * envvars. */ if (!opt.keep_display) gnupg_unsetenv ("DISPLAY"); gnupg_unsetenv ("INSIDE_EMACS"); /* Virtually create the sockets. Note that we use -1 here * because the whole thing works only on Unix. */ map_supervised_sockets (&fd, &fd_extra, &fd_browser, &fd_ssh); if (fd == -1) log_fatal ("no standard socket provided\n"); #ifdef HAVE_SIGPROCMASK if (startup_signal_mask_valid) { if (sigprocmask (SIG_SETMASK, &startup_signal_mask, NULL)) log_error ("error restoring signal mask: %s\n", strerror (errno)); } else log_info ("no saved signal mask\n"); #endif /*HAVE_SIGPROCMASK*/ log_info ("listening on: std=%d extra=%d browser=%d ssh=%d\n", fd, fd_extra, fd_browser, fd_ssh); handle_connections (fd, fd_extra, fd_browser, fd_ssh); #endif /*!HAVE_W32_SYSTEM*/ } else if (!is_daemon) ; /* NOTREACHED */ else { /* Regular server mode */ gnupg_fd_t fd; gnupg_fd_t fd_extra = GNUPG_INVALID_FD; gnupg_fd_t fd_browser = GNUPG_INVALID_FD; gnupg_fd_t fd_ssh = GNUPG_INVALID_FD; #ifndef HAVE_W32_SYSTEM pid_t pid; #endif /* Remove the DISPLAY variable so that a pinentry does not default to a specific display. There is still a default display when gpg-agent was started using --display or a client requested this using an OPTION command. Note, that we don't do this when running in reverse daemon mode (i.e. when exec the program given as arguments). */ #ifndef HAVE_W32_SYSTEM if (!opt.keep_display && !argc) gnupg_unsetenv ("DISPLAY"); #endif /* Remove the INSIDE_EMACS variable so that a pinentry does not always try to interact with Emacs. The variable is set when a client requested this using an OPTION command. */ gnupg_unsetenv ("INSIDE_EMACS"); /* Create the sockets. */ socket_name = create_socket_name (GPG_AGENT_SOCK_NAME, 1); fd = create_server_socket (socket_name, 1, 0, &redir_socket_name, &socket_nonce); if (opt.extra_socket) { if (socket_name_extra) socket_name_extra = create_socket_name (socket_name_extra, 0); else socket_name_extra = create_socket_name /**/ (GPG_AGENT_EXTRA_SOCK_NAME, 1); opt.extra_socket = 2; /* Indicate that it has been malloced. */ fd_extra = create_server_socket (socket_name_extra, 0, 0, &redir_socket_name_extra, &socket_nonce_extra); } if (opt.browser_socket) { if (socket_name_browser) socket_name_browser = create_socket_name (socket_name_browser, 0); else socket_name_browser= create_socket_name /**/ (GPG_AGENT_BROWSER_SOCK_NAME, 1); opt.browser_socket = 2; /* Indicate that it has been malloced. */ fd_browser = create_server_socket (socket_name_browser, 0, 0, &redir_socket_name_browser, &socket_nonce_browser); } socket_name_ssh = create_socket_name (GPG_AGENT_SSH_SOCK_NAME, 1); fd_ssh = create_server_socket (socket_name_ssh, 0, 1, &redir_socket_name_ssh, &socket_nonce_ssh); /* If we are going to exec a program in the parent, we record the PID, so that the child may check whether the program is still alive. */ if (argc) parent_pid = getpid (); fflush (NULL); #ifdef HAVE_W32_SYSTEM (void)csh_style; (void)nodetach; initialize_modules (); #else /*!HAVE_W32_SYSTEM*/ pid = fork (); if (pid == (pid_t)-1) { log_fatal ("fork failed: %s\n", strerror (errno) ); exit (1); } else if (pid) { /* We are the parent */ char *infostr_ssh_sock, *infostr_ssh_valid; /* Close the socket FD. */ close (fd); /* The signal mask might not be correct right now and thus we restore it. That is not strictly necessary but some programs falsely assume a cleared signal mask. */ #ifdef HAVE_SIGPROCMASK if (startup_signal_mask_valid) { if (sigprocmask (SIG_SETMASK, &startup_signal_mask, NULL)) log_error ("error restoring signal mask: %s\n", strerror (errno)); } else log_info ("no saved signal mask\n"); #endif /*HAVE_SIGPROCMASK*/ /* Create the SSH info string if enabled. */ if (ssh_support) { if (asprintf (&infostr_ssh_sock, "SSH_AUTH_SOCK=%s", socket_name_ssh) < 0) { log_error ("out of core\n"); kill (pid, SIGTERM); exit (1); } if (asprintf (&infostr_ssh_valid, "gnupg_SSH_AUTH_SOCK_by=%lu", (unsigned long)getpid()) < 0) { log_error ("out of core\n"); kill (pid, SIGTERM); exit (1); } } *socket_name = 0; /* Don't let cleanup() remove the socket - the child should do this from now on */ if (opt.extra_socket) *socket_name_extra = 0; if (opt.browser_socket) *socket_name_browser = 0; *socket_name_ssh = 0; if (argc) { /* Run the program given on the commandline. */ if (ssh_support && (putenv (infostr_ssh_sock) || putenv (infostr_ssh_valid))) { log_error ("failed to set environment: %s\n", strerror (errno) ); kill (pid, SIGTERM ); exit (1); } /* Close all the file descriptors except the standard ones and those open at startup. We explicitly don't close 0,1,2 in case something went wrong collecting them at startup. */ close_all_fds (3, startup_fd_list); /* Run the command. */ execvp (argv[0], argv); log_error ("failed to run the command: %s\n", strerror (errno)); kill (pid, SIGTERM); exit (1); } else { /* Print the environment string, so that the caller can use shell's eval to set it */ if (csh_style) { if (ssh_support) { *strchr (infostr_ssh_sock, '=') = ' '; es_printf ("setenv %s;\n", infostr_ssh_sock); } } else { if (ssh_support) { es_printf ("%s; export SSH_AUTH_SOCK;\n", infostr_ssh_sock); } } if (ssh_support) { xfree (infostr_ssh_sock); xfree (infostr_ssh_valid); } exit (0); } /*NOTREACHED*/ } /* End parent */ /* This is the child */ initialize_modules (); /* Detach from tty and put process into a new session */ if (!nodetach ) { int i; unsigned int oldflags; /* Close stdin, stdout and stderr unless it is the log stream */ for (i=0; i <= 2; i++) { if (!log_test_fd (i) && i != fd ) { if ( ! close (i) && open ("/dev/null", i? O_WRONLY : O_RDONLY) == -1) { log_error ("failed to open '%s': %s\n", "/dev/null", strerror (errno)); cleanup (); exit (1); } } } if (setsid() == -1) { log_error ("setsid() failed: %s\n", strerror(errno) ); cleanup (); exit (1); } log_get_prefix (&oldflags); log_set_prefix (NULL, oldflags | GPGRT_LOG_RUN_DETACHED); opt.running_detached = 1; /* Unless we are running with a program given on the command * line we can assume that the inotify things works and thus * we can avoid the regular stat calls. */ if (!argc) reliable_homedir_inotify = 1; } { struct sigaction sa; sa.sa_handler = SIG_IGN; sigemptyset (&sa.sa_mask); sa.sa_flags = 0; sigaction (SIGPIPE, &sa, NULL); } #endif /*!HAVE_W32_SYSTEM*/ if (gnupg_chdir (gnupg_daemon_rootdir ())) { log_error ("chdir to '%s' failed: %s\n", gnupg_daemon_rootdir (), strerror (errno)); exit (1); } log_info ("%s %s started\n", gpgrt_strusage(11), gpgrt_strusage(13) ); handle_connections (fd, fd_extra, fd_browser, fd_ssh); assuan_sock_close (fd); } return 0; } /* Exit entry point. This function should be called instead of a plain exit. */ void agent_exit (int rc) { /*FIXME: update_random_seed_file();*/ /* We run our cleanup handler because that may close cipher contexts stored in secure memory and thus this needs to be done before we explicitly terminate secure memory. */ cleanup (); #if 1 /* at this time a bit annoying */ if (opt.debug & DBG_MEMSTAT_VALUE) { gcry_control( GCRYCTL_DUMP_MEMORY_STATS ); gcry_control( GCRYCTL_DUMP_RANDOM_STATS ); } if (opt.debug) gcry_control (GCRYCTL_DUMP_SECMEM_STATS ); #endif gcry_control (GCRYCTL_TERM_SECMEM ); rc = rc? rc : log_get_errorcount(0)? 2 : 0; exit (rc); } /* This is our callback function for gcrypt progress messages. It is set once at startup and dispatches progress messages to the corresponding threads of the agent. */ static void agent_libgcrypt_progress_cb (void *data, const char *what, int printchar, int current, int total) { struct progress_dispatch_s *dispatch; npth_t mytid = npth_self (); (void)data; for (dispatch = progress_dispatch_list; dispatch; dispatch = dispatch->next) if (dispatch->ctrl && dispatch->tid == mytid) break; if (dispatch && dispatch->cb) dispatch->cb (dispatch->ctrl, what, printchar, current, total); } /* If a progress dispatcher callback has been associated with the * current connection unregister it. */ static void unregister_progress_cb (void) { struct progress_dispatch_s *dispatch; npth_t mytid = npth_self (); for (dispatch = progress_dispatch_list; dispatch; dispatch = dispatch->next) if (dispatch->ctrl && dispatch->tid == mytid) break; if (dispatch) { dispatch->ctrl = NULL; dispatch->cb = NULL; } } /* Setup a progress callback CB for the current connection. Using a * CB of NULL disables the callback. */ void agent_set_progress_cb (void (*cb)(ctrl_t ctrl, const char *what, int printchar, int current, int total), ctrl_t ctrl) { struct progress_dispatch_s *dispatch, *firstfree; npth_t mytid = npth_self (); firstfree = NULL; for (dispatch = progress_dispatch_list; dispatch; dispatch = dispatch->next) { if (dispatch->ctrl && dispatch->tid == mytid) break; if (!dispatch->ctrl && !firstfree) firstfree = dispatch; } if (!dispatch) /* None allocated: Reuse or allocate a new one. */ { if (firstfree) { dispatch = firstfree; } else if ((dispatch = xtrycalloc (1, sizeof *dispatch))) { dispatch->next = progress_dispatch_list; progress_dispatch_list = dispatch; } else { log_error ("error allocating new progress dispatcher slot: %s\n", gpg_strerror (gpg_error_from_syserror ())); return; } dispatch->ctrl = ctrl; dispatch->tid = mytid; } dispatch->cb = cb; } /* Each thread has its own local variables conveyed by a control structure usually identified by an argument named CTRL. This function is called immediately after allocating the control structure. Its purpose is to setup the default values for that structure. Note that some values may have already been set. */ static void agent_init_default_ctrl (ctrl_t ctrl) { log_assert (ctrl->session_env); /* Note we ignore malloc errors because we can't do much about it and the request will fail anyway shortly after this initialization. */ session_env_setenv (ctrl->session_env, "DISPLAY", default_display); session_env_setenv (ctrl->session_env, "GPG_TTY", default_ttyname); session_env_setenv (ctrl->session_env, "TERM", default_ttytype); session_env_setenv (ctrl->session_env, "XAUTHORITY", default_xauthority); session_env_setenv (ctrl->session_env, "PINENTRY_USER_DATA", NULL); if (ctrl->lc_ctype) xfree (ctrl->lc_ctype); ctrl->lc_ctype = default_lc_ctype? xtrystrdup (default_lc_ctype) : NULL; if (ctrl->lc_messages) xfree (ctrl->lc_messages); ctrl->lc_messages = default_lc_messages? xtrystrdup (default_lc_messages) /**/ : NULL; ctrl->cache_ttl_opt_preset = CACHE_TTL_OPT_PRESET; } /* Release all resources allocated by default in the control structure. This is the counterpart to agent_init_default_ctrl. */ static void agent_deinit_default_ctrl (ctrl_t ctrl) { unregister_progress_cb (); session_env_release (ctrl->session_env); xfree (ctrl->digest.data); ctrl->digest.data = NULL; if (ctrl->lc_ctype) xfree (ctrl->lc_ctype); if (ctrl->lc_messages) xfree (ctrl->lc_messages); } /* Because the ssh protocol does not send us information about the current TTY setting, we use this function to use those from startup or those explicitly set. This is also used for the restricted mode where we ignore requests to change the environment. */ gpg_error_t agent_copy_startup_env (ctrl_t ctrl) { gpg_error_t err = 0; int iterator = 0; const char *name, *value; while (!err && (name = session_env_list_stdenvnames (&iterator, NULL))) { if ((value = session_env_getenv (opt.startup_env, name))) err = session_env_setenv (ctrl->session_env, name, value); } if (!err && !ctrl->lc_ctype && opt.startup_lc_ctype) if (!(ctrl->lc_ctype = xtrystrdup (opt.startup_lc_ctype))) err = gpg_error_from_syserror (); if (!err && !ctrl->lc_messages && opt.startup_lc_messages) if (!(ctrl->lc_messages = xtrystrdup (opt.startup_lc_messages))) err = gpg_error_from_syserror (); if (err) log_error ("error setting default session environment: %s\n", gpg_strerror (err)); return err; } /* Reread parts of the configuration. Note, that this function is obviously not thread-safe and should only be called from the PTH signal handler. Fixme: Due to the way the argument parsing works, we create a memory leak here for all string type arguments. There is currently no clean way to tell whether the memory for the argument has been allocated or points into the process's original arguments. Unless we have a mechanism to tell this, we need to live on with this. */ static void reread_configuration (void) { gpgrt_argparse_t pargs; char *twopart; int dummy; + int logfile_seen = 0; if (!config_filename) return; /* No config file. */ twopart = strconcat (GPG_AGENT_NAME EXTSEP_S "conf" PATHSEP_S, config_filename, NULL); if (!twopart) return; /* Out of core. */ parse_rereadable_options (NULL, 1); /* Start from the default values. */ memset (&pargs, 0, sizeof pargs); dummy = 0; pargs.argc = &dummy; pargs.flags = (ARGPARSE_FLAG_KEEP |ARGPARSE_FLAG_SYS |ARGPARSE_FLAG_USER); while (gpgrt_argparser (&pargs, opts, twopart) ) { if (pargs.r_opt == ARGPARSE_CONFFILE) { log_info (_("reading options from '%s'\n"), pargs.r_type? pargs.r.ret_str: "[cmdline]"); } else if (pargs.r_opt < -1) pargs.err = ARGPARSE_PRINT_WARNING; else /* Try to parse this option - ignore unchangeable ones. */ - parse_rereadable_options (&pargs, 1); + { + if (pargs.r_opt == oLogFile) + logfile_seen = 1; + parse_rereadable_options (&pargs, 1); + } } gpgrt_argparse (NULL, &pargs, NULL); /* Release internal state. */ xfree (twopart); + finalize_rereadable_options (); set_debug (); + + /* Get a default log file from common.conf. */ + if (!logfile_seen && !parse_comopt (GNUPG_MODULE_NAME_AGENT, !!opt.debug)) + { + if (!current_logfile || !comopt.logfile + || strcmp (current_logfile, comopt.logfile)) + { + log_set_file (comopt.logfile); + xfree (current_logfile); + current_logfile = comopt.logfile? xtrystrdup (comopt.logfile) : NULL; + } + } } /* Return the file name of the socket we are using for native requests. */ const char * get_agent_socket_name (void) { const char *s = socket_name; return (s && *s)? s : NULL; } /* Return the file name of the socket we are using for SSH requests. */ const char * get_agent_ssh_socket_name (void) { const char *s = socket_name_ssh; return (s && *s)? s : NULL; } /* Return the number of active connections. */ int get_agent_active_connection_count (void) { return active_connections; } /* Under W32, this function returns the handle of the scdaemon notification event. Calling it the first time creates that event. */ #if defined(HAVE_W32_SYSTEM) && !defined(HAVE_W32CE_SYSTEM) void * get_agent_daemon_notify_event (void) { static HANDLE the_event = INVALID_HANDLE_VALUE; if (the_event == INVALID_HANDLE_VALUE) { HANDLE h, h2; SECURITY_ATTRIBUTES sa = { sizeof (SECURITY_ATTRIBUTES), NULL, TRUE}; /* We need to use a manual reset event object due to the way our w32-pth wait function works: If we would use an automatic reset event we are not able to figure out which handle has been signaled because at the time we single out the signaled handles using WFSO the event has already been reset due to the WFMO. */ h = CreateEvent (&sa, TRUE, FALSE, NULL); if (!h) log_error ("can't create scd notify event: %s\n", w32_strerror (-1) ); else if (!DuplicateHandle (GetCurrentProcess(), h, GetCurrentProcess(), &h2, EVENT_MODIFY_STATE|SYNCHRONIZE, TRUE, 0)) { log_error ("setting synchronize for scd notify event failed: %s\n", w32_strerror (-1) ); CloseHandle (h); } else { CloseHandle (h); the_event = h2; } } return the_event; } #endif /*HAVE_W32_SYSTEM && !HAVE_W32CE_SYSTEM*/ /* Create a name for the socket in the home directory as using STANDARD_NAME. We also check for valid characters as well as against a maximum allowed length for a unix domain socket is done. The function terminates the process in case of an error. Returns: Pointer to an allocated string with the absolute name of the socket used. */ static char * create_socket_name (char *standard_name, int with_homedir) { char *name; if (with_homedir) name = make_filename (gnupg_socketdir (), standard_name, NULL); else name = make_filename (standard_name, NULL); if (strchr (name, PATHSEP_C)) { log_error (("'%s' are not allowed in the socket name\n"), PATHSEP_S); agent_exit (2); } return name; } /* Create a Unix domain socket with NAME. Returns the file descriptor or terminates the process in case of an error. Note that this function needs to be used for the regular socket first (indicated by PRIMARY) and only then for the extra and the ssh sockets. If the socket has been redirected the name of the real socket is stored as a malloced string at R_REDIR_NAME. If CYGWIN is set a Cygwin compatible socket is created (Windows only). */ static gnupg_fd_t create_server_socket (char *name, int primary, int cygwin, char **r_redir_name, assuan_sock_nonce_t *nonce) { struct sockaddr *addr; struct sockaddr_un *unaddr; socklen_t len; gnupg_fd_t fd; int rc; xfree (*r_redir_name); *r_redir_name = NULL; fd = assuan_sock_new (AF_UNIX, SOCK_STREAM, 0); if (fd == ASSUAN_INVALID_FD) { log_error (_("can't create socket: %s\n"), strerror (errno)); *name = 0; /* Inhibit removal of the socket by cleanup(). */ agent_exit (2); } if (cygwin) assuan_sock_set_flag (fd, "cygwin", 1); unaddr = xmalloc (sizeof *unaddr); addr = (struct sockaddr*)unaddr; { int redirected; if (assuan_sock_set_sockaddr_un (name, addr, &redirected)) { if (errno == ENAMETOOLONG) log_error (_("socket name '%s' is too long\n"), name); else log_error ("error preparing socket '%s': %s\n", name, gpg_strerror (gpg_error_from_syserror ())); *name = 0; /* Inhibit removal of the socket by cleanup(). */ xfree (unaddr); agent_exit (2); } if (redirected) { *r_redir_name = xstrdup (unaddr->sun_path); if (opt.verbose) log_info ("redirecting socket '%s' to '%s'\n", name, *r_redir_name); } } len = SUN_LEN (unaddr); rc = assuan_sock_bind (fd, addr, len); /* Our error code mapping on W32CE returns EEXIST thus we also test for this. */ if (rc == -1 && (errno == EADDRINUSE #ifdef HAVE_W32_SYSTEM || errno == EEXIST #endif )) { /* Check whether a gpg-agent is already running. We do this test only if this is the primary socket. For secondary sockets we assume that a test for gpg-agent has already been done and reuse the requested socket. Testing the ssh-socket is not possible because at this point, though we know the new Assuan socket, the Assuan server and thus the ssh-agent server is not yet operational; this would lead to a hang. */ if (primary && !check_for_running_agent (1)) { log_set_prefix (NULL, GPGRT_LOG_WITH_PREFIX); log_set_file (NULL); log_error (_("a gpg-agent is already running - " "not starting a new one\n")); *name = 0; /* Inhibit removal of the socket by cleanup(). */ assuan_sock_close (fd); xfree (unaddr); agent_exit (2); } gnupg_remove (unaddr->sun_path); rc = assuan_sock_bind (fd, addr, len); } if (rc != -1 && (rc=assuan_sock_get_nonce (addr, len, nonce))) log_error (_("error getting nonce for the socket\n")); if (rc == -1) { /* We use gpg_strerror here because it allows us to get strings for some W32 socket error codes. */ log_error (_("error binding socket to '%s': %s\n"), unaddr->sun_path, gpg_strerror (gpg_error_from_syserror ())); assuan_sock_close (fd); *name = 0; /* Inhibit removal of the socket by cleanup(). */ xfree (unaddr); agent_exit (2); } if (gnupg_chmod (unaddr->sun_path, "-rwx")) log_error (_("can't set permissions of '%s': %s\n"), unaddr->sun_path, strerror (errno)); if (listen (FD2INT(fd), listen_backlog ) == -1) { log_error ("listen(fd,%d) failed: %s\n", listen_backlog, strerror (errno)); *name = 0; /* Inhibit removal of the socket by cleanup(). */ assuan_sock_close (fd); xfree (unaddr); agent_exit (2); } if (opt.verbose) log_info (_("listening on socket '%s'\n"), unaddr->sun_path); xfree (unaddr); return fd; } /* Check that the directory for storing the private keys exists and create it if not. This function won't fail as it is only a convenience function and not strictly necessary. */ static void create_private_keys_directory (const char *home) { char *fname; struct stat statbuf; fname = make_filename (home, GNUPG_PRIVATE_KEYS_DIR, NULL); if (gnupg_stat (fname, &statbuf) && errno == ENOENT) { if (gnupg_mkdir (fname, "-rwx")) log_error (_("can't create directory '%s': %s\n"), fname, strerror (errno) ); else if (!opt.quiet) log_info (_("directory '%s' created\n"), fname); if (gnupg_chmod (fname, "-rwx")) log_error (_("can't set permissions of '%s': %s\n"), fname, strerror (errno)); } else { /* The file exists or another error. Make sure we have sensible * permissions. We enforce rwx for user but keep existing group * permissions. Permissions for other are always cleared. */ if (gnupg_chmod (fname, "-rwx...---")) log_error (_("can't set permissions of '%s': %s\n"), fname, strerror (errno)); } xfree (fname); } /* Create the directory only if the supplied directory name is the same as the default one. This way we avoid to create arbitrary directories when a non-default home directory is used. To cope with HOME, we compare only the suffix if we see that the default homedir does start with a tilde. We don't stop here in case of problems because other functions will throw an error anyway.*/ static void create_directories (void) { struct stat statbuf; const char *defhome = standard_homedir (); char *home; home = make_filename (gnupg_homedir (), NULL); if (gnupg_stat (home, &statbuf)) { if (errno == ENOENT) { if ( #ifdef HAVE_W32_SYSTEM ( !compare_filenames (home, defhome) ) #else (*defhome == '~' && (strlen (home) >= strlen (defhome+1) && !strcmp (home + strlen(home) - strlen (defhome+1), defhome+1))) || (*defhome != '~' && !strcmp (home, defhome) ) #endif ) { if (gnupg_mkdir (home, "-rwx")) log_error (_("can't create directory '%s': %s\n"), home, strerror (errno) ); else { if (!opt.quiet) log_info (_("directory '%s' created\n"), home); create_private_keys_directory (home); } } } else log_error (_("stat() failed for '%s': %s\n"), home, strerror (errno)); } else if ( !S_ISDIR(statbuf.st_mode)) { log_error (_("can't use '%s' as home directory\n"), home); } else /* exists and is a directory. */ { create_private_keys_directory (home); } xfree (home); } /* This is the worker for the ticker. It is called every few seconds and may only do fast operations. */ static void handle_tick (void) { static time_t last_minute; struct stat statbuf; if (!last_minute) last_minute = time (NULL); /* If we are running as a child of another process, check whether the parent is still alive and shutdown if not. */ #ifndef HAVE_W32_SYSTEM if (parent_pid != (pid_t)(-1)) { if (kill (parent_pid, 0)) { shutdown_pending = 2; log_info ("parent process died - shutting down\n"); log_info ("%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13)); cleanup (); agent_exit (0); } } #endif /*HAVE_W32_SYSTEM*/ /* Code to be run from time to time. */ #if CHECK_OWN_SOCKET_INTERVAL > 0 if (last_minute + CHECK_OWN_SOCKET_INTERVAL <= time (NULL)) { check_own_socket (); last_minute = time (NULL); } #endif /* Need to check for expired cache entries. */ agent_cache_housekeeping (); /* Check whether the homedir is still available. */ if (!shutdown_pending && (!have_homedir_inotify || !reliable_homedir_inotify) && gnupg_stat (gnupg_homedir (), &statbuf) && errno == ENOENT) { shutdown_pending = 1; log_info ("homedir has been removed - shutting down\n"); } } /* A global function which allows us to call the reload stuff from other places too. This is only used when build for W32. */ void agent_sighup_action (void) { log_info ("SIGHUP received - " "re-reading configuration and flushing cache\n"); agent_flush_cache (0); reread_configuration (); agent_reload_trustlist (); /* We flush the module name cache so that after installing a "pinentry" binary that one can be used in case the "pinentry-basic" fallback was in use. */ gnupg_module_name_flush_some (); if (opt.disable_daemon[DAEMON_SCD]) agent_kill_daemon (DAEMON_SCD); } /* A helper function to handle SIGUSR2. */ static void agent_sigusr2_action (void) { if (opt.verbose) log_info ("SIGUSR2 received - updating card event counter\n"); /* Nothing to check right now. We only increment a counter. */ bump_card_eventcounter (); } #ifndef HAVE_W32_SYSTEM /* The signal handler for this program. It is expected to be run in its own thread and not in the context of a signal handler. */ static void handle_signal (int signo) { switch (signo) { #ifndef HAVE_W32_SYSTEM case SIGHUP: agent_sighup_action (); break; case SIGUSR1: log_info ("SIGUSR1 received - printing internal information:\n"); /* Fixme: We need to see how to integrate pth dumping into our logging system. */ /* pth_ctrl (PTH_CTRL_DUMPSTATE, log_get_stream ()); */ agent_query_dump_state (); agent_daemon_dump_state (); break; case SIGUSR2: agent_sigusr2_action (); break; case SIGTERM: if (!shutdown_pending) log_info ("SIGTERM received - shutting down ...\n"); else log_info ("SIGTERM received - still %i open connections\n", active_connections); shutdown_pending++; if (shutdown_pending > 2) { log_info ("shutdown forced\n"); log_info ("%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13)); cleanup (); agent_exit (0); } break; case SIGINT: log_info ("SIGINT received - immediate shutdown\n"); log_info( "%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13)); cleanup (); agent_exit (0); break; #endif default: log_info ("signal %d received - no action defined\n", signo); } } #endif /* Check the nonce on a new connection. This is a NOP unless we are using our Unix domain socket emulation under Windows. */ static int check_nonce (ctrl_t ctrl, assuan_sock_nonce_t *nonce) { if (assuan_sock_check_nonce (ctrl->thread_startup.fd, nonce)) { log_info (_("error reading nonce on fd %d: %s\n"), FD2INT(ctrl->thread_startup.fd), strerror (errno)); assuan_sock_close (ctrl->thread_startup.fd); xfree (ctrl); return -1; } else return 0; } #ifdef HAVE_W32_SYSTEM /* The window message processing function for Putty. Warning: This code runs as a native Windows thread. Use of our own functions needs to be bracket with pth_leave/pth_enter. */ static LRESULT CALLBACK putty_message_proc (HWND hwnd, UINT msg, WPARAM wparam, LPARAM lparam) { int ret = 0; int w32rc; COPYDATASTRUCT *cds; const char *mapfile; HANDLE maphd; PSID mysid = NULL; PSID mapsid = NULL; void *data = NULL; PSECURITY_DESCRIPTOR psd = NULL; ctrl_t ctrl = NULL; if (msg != WM_COPYDATA) { return DefWindowProc (hwnd, msg, wparam, lparam); } cds = (COPYDATASTRUCT*)lparam; if (cds->dwData != PUTTY_IPC_MAGIC) return 0; /* Ignore data with the wrong magic. */ mapfile = cds->lpData; if (!cds->cbData || mapfile[cds->cbData - 1]) return 0; /* Ignore empty and non-properly terminated strings. */ if (DBG_IPC) { npth_protect (); log_debug ("ssh map file '%s'", mapfile); npth_unprotect (); } maphd = OpenFileMapping (FILE_MAP_ALL_ACCESS, FALSE, mapfile); if (DBG_IPC) { npth_protect (); log_debug ("ssh map handle %p\n", maphd); npth_unprotect (); } if (!maphd || maphd == INVALID_HANDLE_VALUE) return 0; npth_protect (); mysid = w32_get_user_sid (); if (!mysid) { log_error ("error getting my sid\n"); goto leave; } w32rc = GetSecurityInfo (maphd, SE_KERNEL_OBJECT, OWNER_SECURITY_INFORMATION, &mapsid, NULL, NULL, NULL, &psd); if (w32rc) { log_error ("error getting sid of ssh map file: rc=%d", w32rc); goto leave; } if (DBG_IPC) { char *sidstr; if (!ConvertSidToStringSid (mysid, &sidstr)) sidstr = NULL; log_debug (" my sid: '%s'", sidstr? sidstr: "[error]"); LocalFree (sidstr); if (!ConvertSidToStringSid (mapsid, &sidstr)) sidstr = NULL; log_debug ("ssh map file sid: '%s'", sidstr? sidstr: "[error]"); LocalFree (sidstr); } if (!EqualSid (mysid, mapsid)) { log_error ("ssh map file has a non-matching sid\n"); goto leave; } data = MapViewOfFile (maphd, FILE_MAP_ALL_ACCESS, 0, 0, 0); if (DBG_IPC) log_debug ("ssh IPC buffer at %p\n", data); if (!data) goto leave; /* log_printhex ("request:", data, 20); */ ctrl = xtrycalloc (1, sizeof *ctrl); if (!ctrl) { log_error ("error allocating connection control data: %s\n", strerror (errno) ); goto leave; } ctrl->session_env = session_env_new (); if (!ctrl->session_env) { log_error ("error allocating session environment block: %s\n", strerror (errno) ); goto leave; } agent_init_default_ctrl (ctrl); if (!serve_mmapped_ssh_request (ctrl, data, PUTTY_IPC_MAXLEN)) ret = 1; /* Valid ssh message has been constructed. */ agent_deinit_default_ctrl (ctrl); /* log_printhex (" reply:", data, 20); */ leave: xfree (ctrl); if (data) UnmapViewOfFile (data); xfree (mapsid); if (psd) LocalFree (psd); xfree (mysid); CloseHandle (maphd); npth_unprotect (); return ret; } #endif /*HAVE_W32_SYSTEM*/ #ifdef HAVE_W32_SYSTEM /* The thread handling Putty's IPC requests. */ static void * putty_message_thread (void *arg) { WNDCLASS wndwclass = {0, putty_message_proc, 0, 0, NULL, NULL, NULL, NULL, NULL, "Pageant"}; HWND hwnd; MSG msg; (void)arg; if (opt.verbose) log_info ("putty message loop thread started\n"); /* The message loop runs as thread independent from our nPth system. This also means that we need to make sure that we switch back to our system before calling any no-windows function. */ npth_unprotect (); /* First create a window to make sure that a message queue exists for this thread. */ if (!RegisterClass (&wndwclass)) { npth_protect (); log_error ("error registering Pageant window class"); return NULL; } hwnd = CreateWindowEx (0, "Pageant", "Pageant", 0, 0, 0, 0, 0, HWND_MESSAGE, /* hWndParent */ NULL, /* hWndMenu */ NULL, /* hInstance */ NULL); /* lpParm */ if (!hwnd) { npth_protect (); log_error ("error creating Pageant window"); return NULL; } while (GetMessage(&msg, NULL, 0, 0)) { TranslateMessage(&msg); DispatchMessage(&msg); } /* Back to nPth. */ npth_protect (); if (opt.verbose) log_info ("putty message loop thread stopped\n"); return NULL; } #endif /*HAVE_W32_SYSTEM*/ static void * do_start_connection_thread (ctrl_t ctrl) { active_connections++; agent_init_default_ctrl (ctrl); if (opt.verbose && !DBG_IPC) log_info (_("handler 0x%lx for fd %d started\n"), (unsigned long) npth_self(), FD2INT(ctrl->thread_startup.fd)); start_command_handler (ctrl, GNUPG_INVALID_FD, ctrl->thread_startup.fd); if (opt.verbose && !DBG_IPC) log_info (_("handler 0x%lx for fd %d terminated\n"), (unsigned long) npth_self(), FD2INT(ctrl->thread_startup.fd)); agent_deinit_default_ctrl (ctrl); xfree (ctrl); active_connections--; return NULL; } /* This is the standard connection thread's main function. */ static void * start_connection_thread_std (void *arg) { ctrl_t ctrl = arg; if (check_nonce (ctrl, &socket_nonce)) { log_error ("handler 0x%lx nonce check FAILED\n", (unsigned long) npth_self()); return NULL; } return do_start_connection_thread (ctrl); } /* This is the extra socket connection thread's main function. */ static void * start_connection_thread_extra (void *arg) { ctrl_t ctrl = arg; if (check_nonce (ctrl, &socket_nonce_extra)) { log_error ("handler 0x%lx nonce check FAILED\n", (unsigned long) npth_self()); return NULL; } ctrl->restricted = 1; return do_start_connection_thread (ctrl); } /* This is the browser socket connection thread's main function. */ static void * start_connection_thread_browser (void *arg) { ctrl_t ctrl = arg; if (check_nonce (ctrl, &socket_nonce_browser)) { log_error ("handler 0x%lx nonce check FAILED\n", (unsigned long) npth_self()); return NULL; } ctrl->restricted = 2; return do_start_connection_thread (ctrl); } /* This is the ssh connection thread's main function. */ static void * start_connection_thread_ssh (void *arg) { ctrl_t ctrl = arg; if (check_nonce (ctrl, &socket_nonce_ssh)) return NULL; active_connections++; agent_init_default_ctrl (ctrl); if (opt.verbose) log_info (_("ssh handler 0x%lx for fd %d started\n"), (unsigned long) npth_self(), FD2INT(ctrl->thread_startup.fd)); start_command_handler_ssh (ctrl, ctrl->thread_startup.fd); if (opt.verbose) log_info (_("ssh handler 0x%lx for fd %d terminated\n"), (unsigned long) npth_self(), FD2INT(ctrl->thread_startup.fd)); agent_deinit_default_ctrl (ctrl); xfree (ctrl); active_connections--; return NULL; } /* Connection handler loop. Wait for connection requests and spawn a thread after accepting a connection. */ static void handle_connections (gnupg_fd_t listen_fd, gnupg_fd_t listen_fd_extra, gnupg_fd_t listen_fd_browser, gnupg_fd_t listen_fd_ssh) { gpg_error_t err; npth_attr_t tattr; struct sockaddr_un paddr; socklen_t plen; fd_set fdset, read_fdset; int ret; gnupg_fd_t fd; int nfd; int saved_errno; struct timespec abstime; struct timespec curtime; struct timespec timeout; #ifdef HAVE_W32_SYSTEM HANDLE events[2]; unsigned int events_set; #endif int sock_inotify_fd = -1; int home_inotify_fd = -1; struct { const char *name; void *(*func) (void *arg); gnupg_fd_t l_fd; } listentbl[] = { { "std", start_connection_thread_std }, { "extra", start_connection_thread_extra }, { "browser", start_connection_thread_browser }, { "ssh", start_connection_thread_ssh } }; ret = npth_attr_init(&tattr); if (ret) log_fatal ("error allocating thread attributes: %s\n", strerror (ret)); npth_attr_setdetachstate (&tattr, NPTH_CREATE_DETACHED); #ifndef HAVE_W32_SYSTEM npth_sigev_init (); npth_sigev_add (SIGHUP); npth_sigev_add (SIGUSR1); npth_sigev_add (SIGUSR2); npth_sigev_add (SIGINT); npth_sigev_add (SIGTERM); npth_sigev_fini (); #else # ifdef HAVE_W32CE_SYSTEM /* Use a dummy event. */ sigs = 0; ev = pth_event (PTH_EVENT_SIGS, &sigs, &signo); # else events[0] = get_agent_daemon_notify_event (); events[1] = INVALID_HANDLE_VALUE; # endif #endif if (disable_check_own_socket) sock_inotify_fd = -1; else if ((err = gnupg_inotify_watch_socket (&sock_inotify_fd, socket_name))) { if (gpg_err_code (err) != GPG_ERR_NOT_SUPPORTED) log_info ("error enabling daemon termination by socket removal: %s\n", gpg_strerror (err)); } if (disable_check_own_socket) home_inotify_fd = -1; else if ((err = gnupg_inotify_watch_delete_self (&home_inotify_fd, gnupg_homedir ()))) { if (gpg_err_code (err) != GPG_ERR_NOT_SUPPORTED) log_info ("error enabling daemon termination by homedir removal: %s\n", gpg_strerror (err)); } else have_homedir_inotify = 1; /* On Windows we need to fire up a separate thread to listen for requests from Putty (an SSH client), so we can replace Putty's Pageant (its ssh-agent implementation). */ #ifdef HAVE_W32_SYSTEM if (putty_support) { npth_t thread; ret = npth_create (&thread, &tattr, putty_message_thread, NULL); if (ret) { log_error ("error spawning putty message loop: %s\n", strerror (ret)); } } #endif /*HAVE_W32_SYSTEM*/ /* Set a flag to tell call-scd.c that it may enable event notifications. */ opt.sigusr2_enabled = 1; FD_ZERO (&fdset); FD_SET (FD2INT (listen_fd), &fdset); nfd = FD2INT (listen_fd); if (listen_fd_extra != GNUPG_INVALID_FD) { FD_SET ( FD2INT(listen_fd_extra), &fdset); if (FD2INT (listen_fd_extra) > nfd) nfd = FD2INT (listen_fd_extra); } if (listen_fd_browser != GNUPG_INVALID_FD) { FD_SET ( FD2INT(listen_fd_browser), &fdset); if (FD2INT (listen_fd_browser) > nfd) nfd = FD2INT (listen_fd_browser); } if (listen_fd_ssh != GNUPG_INVALID_FD) { FD_SET ( FD2INT(listen_fd_ssh), &fdset); if (FD2INT (listen_fd_ssh) > nfd) nfd = FD2INT (listen_fd_ssh); } if (sock_inotify_fd != -1) { FD_SET (sock_inotify_fd, &fdset); if (sock_inotify_fd > nfd) nfd = sock_inotify_fd; } if (home_inotify_fd != -1) { FD_SET (home_inotify_fd, &fdset); if (home_inotify_fd > nfd) nfd = home_inotify_fd; } listentbl[0].l_fd = listen_fd; listentbl[1].l_fd = listen_fd_extra; listentbl[2].l_fd = listen_fd_browser; listentbl[3].l_fd = listen_fd_ssh; npth_clock_gettime (&abstime); abstime.tv_sec += TIMERTICK_INTERVAL; for (;;) { /* Shutdown test. */ if (shutdown_pending) { if (active_connections == 0) break; /* ready */ /* Do not accept new connections but keep on running the * loop to cope with the timer events. * * Note that we do not close the listening socket because a * client trying to connect to that socket would instead * restart a new dirmngr instance - which is unlikely the * intention of a shutdown. */ FD_ZERO (&fdset); nfd = -1; if (sock_inotify_fd != -1) { FD_SET (sock_inotify_fd, &fdset); nfd = sock_inotify_fd; } if (home_inotify_fd != -1) { FD_SET (home_inotify_fd, &fdset); if (home_inotify_fd > nfd) nfd = home_inotify_fd; } } /* POSIX says that fd_set should be implemented as a structure, thus a simple assignment is fine to copy the entire set. */ read_fdset = fdset; npth_clock_gettime (&curtime); if (!(npth_timercmp (&curtime, &abstime, <))) { /* Timeout. */ handle_tick (); npth_clock_gettime (&abstime); abstime.tv_sec += TIMERTICK_INTERVAL; } npth_timersub (&abstime, &curtime, &timeout); #ifndef HAVE_W32_SYSTEM ret = npth_pselect (nfd+1, &read_fdset, NULL, NULL, &timeout, npth_sigev_sigmask ()); saved_errno = errno; { int signo; while (npth_sigev_get_pending (&signo)) handle_signal (signo); } #else ret = npth_eselect (nfd+1, &read_fdset, NULL, NULL, &timeout, events, &events_set); saved_errno = errno; /* This is valid even if npth_eselect returns an error. */ if (events_set & 1) agent_sigusr2_action (); #endif if (ret == -1 && saved_errno != EINTR) { log_error (_("npth_pselect failed: %s - waiting 1s\n"), strerror (saved_errno)); npth_sleep (1); continue; } if (ret <= 0) /* Interrupt or timeout. Will be handled when calculating the next timeout. */ continue; /* The inotify fds are set even when a shutdown is pending (see * above). So we must handle them in any case. To avoid that * they trigger a second time we close them immediately. */ if (sock_inotify_fd != -1 && FD_ISSET (sock_inotify_fd, &read_fdset) && gnupg_inotify_has_name (sock_inotify_fd, GPG_AGENT_SOCK_NAME)) { shutdown_pending = 1; close (sock_inotify_fd); sock_inotify_fd = -1; log_info ("socket file has been removed - shutting down\n"); } if (home_inotify_fd != -1 && FD_ISSET (home_inotify_fd, &read_fdset)) { shutdown_pending = 1; close (home_inotify_fd); home_inotify_fd = -1; log_info ("homedir has been removed - shutting down\n"); } if (!shutdown_pending) { int idx; ctrl_t ctrl; npth_t thread; for (idx=0; idx < DIM(listentbl); idx++) { if (listentbl[idx].l_fd == GNUPG_INVALID_FD) continue; if (!FD_ISSET (FD2INT (listentbl[idx].l_fd), &read_fdset)) continue; plen = sizeof paddr; fd = INT2FD (npth_accept (FD2INT(listentbl[idx].l_fd), (struct sockaddr *)&paddr, &plen)); if (fd == GNUPG_INVALID_FD) { log_error ("accept failed for %s: %s\n", listentbl[idx].name, strerror (errno)); } else if ( !(ctrl = xtrycalloc (1, sizeof *ctrl))) { log_error ("error allocating connection data for %s: %s\n", listentbl[idx].name, strerror (errno) ); assuan_sock_close (fd); } else if ( !(ctrl->session_env = session_env_new ())) { log_error ("error allocating session env block for %s: %s\n", listentbl[idx].name, strerror (errno) ); xfree (ctrl); assuan_sock_close (fd); } else { ctrl->thread_startup.fd = fd; ret = npth_create (&thread, &tattr, listentbl[idx].func, ctrl); if (ret) { log_error ("error spawning connection handler for %s:" " %s\n", listentbl[idx].name, strerror (ret)); assuan_sock_close (fd); xfree (ctrl); } } } } } if (sock_inotify_fd != -1) close (sock_inotify_fd); if (home_inotify_fd != -1) close (home_inotify_fd); cleanup (); log_info (_("%s %s stopped\n"), gpgrt_strusage(11), gpgrt_strusage(13)); npth_attr_destroy (&tattr); } /* Helper for check_own_socket. */ static gpg_error_t check_own_socket_pid_cb (void *opaque, const void *buffer, size_t length) { membuf_t *mb = opaque; put_membuf (mb, buffer, length); return 0; } /* The thread running the actual check. We need to run this in a separate thread so that check_own_thread can be called from the timer tick. */ static void * check_own_socket_thread (void *arg) { int rc; char *sockname = arg; assuan_context_t ctx = NULL; membuf_t mb; char *buffer; check_own_socket_running++; rc = assuan_new (&ctx); if (rc) { log_error ("can't allocate assuan context: %s\n", gpg_strerror (rc)); goto leave; } assuan_set_flag (ctx, ASSUAN_NO_LOGGING, 1); rc = assuan_socket_connect (ctx, sockname, (pid_t)(-1), 0); if (rc) { log_error ("can't connect my own socket: %s\n", gpg_strerror (rc)); goto leave; } init_membuf (&mb, 100); rc = assuan_transact (ctx, "GETINFO pid", check_own_socket_pid_cb, &mb, NULL, NULL, NULL, NULL); put_membuf (&mb, "", 1); buffer = get_membuf (&mb, NULL); if (rc || !buffer) { log_error ("sending command \"%s\" to my own socket failed: %s\n", "GETINFO pid", gpg_strerror (rc)); rc = 1; } else if ( (pid_t)strtoul (buffer, NULL, 10) != getpid ()) { log_error ("socket is now serviced by another server\n"); rc = 1; } else if (opt.verbose > 1) log_error ("socket is still served by this server\n"); xfree (buffer); leave: xfree (sockname); if (ctx) assuan_release (ctx); if (rc) { /* We may not remove the socket as it is now in use by another server. */ inhibit_socket_removal = 1; shutdown_pending = 2; log_info ("this process is useless - shutting down\n"); } check_own_socket_running--; return NULL; } /* Check whether we are still listening on our own socket. In case another gpg-agent process started after us has taken ownership of our socket, we would linger around without any real task. Thus we better check once in a while whether we are really needed. */ static void check_own_socket (void) { char *sockname; npth_t thread; npth_attr_t tattr; int err; if (disable_check_own_socket) return; if (check_own_socket_running || shutdown_pending) return; /* Still running or already shutting down. */ sockname = make_filename_try (gnupg_socketdir (), GPG_AGENT_SOCK_NAME, NULL); if (!sockname) return; /* Out of memory. */ err = npth_attr_init (&tattr); if (err) return; npth_attr_setdetachstate (&tattr, NPTH_CREATE_DETACHED); err = npth_create (&thread, &tattr, check_own_socket_thread, sockname); if (err) log_error ("error spawning check_own_socket_thread: %s\n", strerror (err)); npth_attr_destroy (&tattr); } /* Figure out whether an agent is available and running. Prints an error if not. If SILENT is true, no messages are printed. Returns 0 if the agent is running. */ static int check_for_running_agent (int silent) { gpg_error_t err; char *sockname; assuan_context_t ctx = NULL; sockname = make_filename_try (gnupg_socketdir (), GPG_AGENT_SOCK_NAME, NULL); if (!sockname) return gpg_error_from_syserror (); err = assuan_new (&ctx); if (!err) err = assuan_socket_connect (ctx, sockname, (pid_t)(-1), 0); xfree (sockname); if (err) { if (!silent) log_error (_("no gpg-agent running in this session\n")); if (ctx) assuan_release (ctx); return -1; } if (!opt.quiet && !silent) log_info ("gpg-agent running and available\n"); assuan_release (ctx); return 0; } diff --git a/dirmngr/dirmngr.c b/dirmngr/dirmngr.c index 33de686f5..38ae1c6ed 100644 --- a/dirmngr/dirmngr.c +++ b/dirmngr/dirmngr.c @@ -1,2396 +1,2423 @@ /* dirmngr.c - Keyserver and X.509 LDAP access * Copyright (C) 2002 Klarälvdalens Datakonsult AB * Copyright (C) 2003-2004, 2006-2007, 2008, 2010-2011, 2020 g10 Code GmbH * Copyright (C) 2014 Werner Koch * * This file is part of GnuPG. * * GnuPG is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * GnuPG is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * SPDX-License-Identifier: GPL-3.0-or-later */ #include #include #include #include #include #include #include #include #include #include #ifndef HAVE_W32_SYSTEM #include #include #endif #include #include #ifdef HAVE_SIGNAL_H # include #endif #ifdef HAVE_INOTIFY_INIT # include #endif /*HAVE_INOTIFY_INIT*/ #include #include "dirmngr-err.h" #if HTTP_USE_NTBTLS # include #elif HTTP_USE_GNUTLS # include #endif /*HTTP_USE_GNUTLS*/ #define INCLUDED_BY_MAIN_MODULE 1 #define GNUPG_COMMON_NEED_AFLOCAL #include "dirmngr.h" #include #include "certcache.h" #include "crlcache.h" #include "crlfetch.h" #include "misc.h" #if USE_LDAP # include "ldapserver.h" #endif #include "../common/asshelp.h" #if USE_LDAP # include "ldap-wrapper.h" #endif +#include "../common/comopt.h" #include "../common/init.h" #include "../common/gc-opt-flags.h" #include "dns-stuff.h" #include "http-common.h" #ifndef ENAMETOOLONG # define ENAMETOOLONG EINVAL #endif enum cmd_and_opt_values { aNull = 0, oCsh = 'c', oQuiet = 'q', oSh = 's', oVerbose = 'v', oNoVerbose = 500, aServer, aDaemon, aSupervised, aListCRLs, aLoadCRL, aFetchCRL, aShutdown, aFlush, aGPGConfList, aGPGConfTest, aGPGConfVersions, oOptions, oDebug, oDebugAll, oDebugWait, oDebugLevel, oGnutlsDebug, oNoGreeting, oNoOptions, oHomedir, oNoDetach, oLogFile, oBatch, oDisableHTTP, oDisableLDAP, oDisableIPv4, oDisableIPv6, oIgnoreLDAPDP, oIgnoreHTTPDP, oIgnoreOCSPSvcUrl, oHonorHTTPProxy, oHTTPProxy, oLDAPProxy, oOnlyLDAPProxy, oLDAPFile, oLDAPTimeout, oLDAPAddServers, oOCSPResponder, oOCSPSigner, oOCSPMaxClockSkew, oOCSPMaxPeriod, oOCSPCurrentPeriod, oMaxReplies, oHkpCaCert, oFakedSystemTime, oForce, oAllowOCSP, oAllowVersionCheck, oSocketName, oLDAPWrapperProgram, oHTTPWrapperProgram, oIgnoreCertExtension, oUseTor, oNoUseTor, oKeyServer, oNameServer, oDisableCheckOwnSocket, oStandardResolver, oRecursiveResolver, oResolverTimeout, oConnectTimeout, oConnectQuickTimeout, oListenBacklog, aTest }; static gpgrt_opt_t opts[] = { ARGPARSE_c (aGPGConfList, "gpgconf-list", "@"), ARGPARSE_c (aGPGConfTest, "gpgconf-test", "@"), ARGPARSE_c (aGPGConfVersions, "gpgconf-versions", "@"), ARGPARSE_group (300, N_("@Commands:\n ")), ARGPARSE_c (aServer, "server", N_("run in server mode (foreground)") ), ARGPARSE_c (aDaemon, "daemon", N_("run in daemon mode (background)") ), #ifndef HAVE_W32_SYSTEM ARGPARSE_c (aSupervised, "supervised", N_("run in supervised mode")), #endif ARGPARSE_c (aListCRLs, "list-crls", N_("list the contents of the CRL cache")), ARGPARSE_c (aLoadCRL, "load-crl", N_("|FILE|load CRL from FILE into cache")), ARGPARSE_c (aFetchCRL, "fetch-crl", N_("|URL|fetch a CRL from URL")), ARGPARSE_c (aShutdown, "shutdown", N_("shutdown the dirmngr")), ARGPARSE_c (aFlush, "flush", N_("flush the cache")), ARGPARSE_header (NULL, N_("Options used for startup")), ARGPARSE_s_n (oNoDetach, "no-detach", N_("do not detach from the console")), ARGPARSE_s_n (oSh, "sh", N_("sh-style command output")), ARGPARSE_s_n (oCsh, "csh", N_("csh-style command output")), ARGPARSE_s_s (oHomedir, "homedir", "@"), ARGPARSE_conffile (oOptions, "options", N_("|FILE|read options from FILE")), ARGPARSE_noconffile (oNoOptions, "no-options", "@"), ARGPARSE_header ("Monitor", N_("Options controlling the diagnostic output")), ARGPARSE_s_n (oVerbose, "verbose", N_("verbose")), ARGPARSE_s_n (oQuiet, "quiet", N_("be somewhat more quiet")), ARGPARSE_s_n (oNoGreeting, "no-greeting", "@"), ARGPARSE_s_s (oDebugLevel, "debug-level", N_("|LEVEL|set the debugging level to LEVEL")), ARGPARSE_s_s (oDebug, "debug", "@"), ARGPARSE_s_n (oDebugAll, "debug-all", "@"), ARGPARSE_s_i (oGnutlsDebug, "gnutls-debug", "@"), ARGPARSE_s_i (oGnutlsDebug, "tls-debug", "@"), ARGPARSE_s_i (oDebugWait, "debug-wait", "@"), ARGPARSE_s_s (oLogFile, "log-file", N_("|FILE|write server mode logs to FILE")), ARGPARSE_header ("Configuration", N_("Options controlling the configuration")), ARGPARSE_s_n (oAllowVersionCheck, "allow-version-check", N_("allow online software version check")), ARGPARSE_s_i (oListenBacklog, "listen-backlog", "@"), ARGPARSE_s_i (oMaxReplies, "max-replies", N_("|N|do not return more than N items in one query")), ARGPARSE_s_u (oFakedSystemTime, "faked-system-time", "@"), /*(epoch time)*/ ARGPARSE_s_n (oDisableCheckOwnSocket, "disable-check-own-socket", "@"), ARGPARSE_s_s (oIgnoreCertExtension,"ignore-cert-extension", "@"), ARGPARSE_header ("Network", N_("Network related options")), ARGPARSE_s_n (oUseTor, "use-tor", N_("route all network traffic via Tor")), ARGPARSE_s_n (oNoUseTor, "no-use-tor", "@"), ARGPARSE_s_n (oDisableIPv4, "disable-ipv4", "@"), ARGPARSE_s_n (oDisableIPv6, "disable-ipv6", "@"), ARGPARSE_s_n (oStandardResolver, "standard-resolver", "@"), ARGPARSE_s_n (oRecursiveResolver, "recursive-resolver", "@"), ARGPARSE_s_i (oResolverTimeout, "resolver-timeout", "@"), ARGPARSE_s_s (oNameServer, "nameserver", "@"), ARGPARSE_s_i (oConnectTimeout, "connect-timeout", "@"), ARGPARSE_s_i (oConnectQuickTimeout, "connect-quick-timeout", "@"), ARGPARSE_header ("Keyserver", N_("Configuration for Keyservers")), ARGPARSE_s_s (oKeyServer, "keyserver", N_("|URL|use keyserver at URL")), ARGPARSE_s_s (oHkpCaCert, "hkp-cacert", N_("|FILE|use the CA certificates in FILE for HKP over TLS")), ARGPARSE_header ("HTTP", N_("Configuration for HTTP servers")), ARGPARSE_s_n (oDisableHTTP, "disable-http", N_("inhibit the use of HTTP")), ARGPARSE_s_n (oIgnoreHTTPDP,"ignore-http-dp", N_("ignore HTTP CRL distribution points")), ARGPARSE_s_s (oHTTPProxy, "http-proxy", N_("|URL|redirect all HTTP requests to URL")), ARGPARSE_s_n (oHonorHTTPProxy, "honor-http-proxy", N_("use system's HTTP proxy setting")), ARGPARSE_s_s (oLDAPWrapperProgram, "ldap-wrapper-program", "@"), ARGPARSE_header ("LDAP", N_("Configuration of LDAP servers to use")), ARGPARSE_s_n (oDisableLDAP, "disable-ldap", N_("inhibit the use of LDAP")), ARGPARSE_s_n (oIgnoreLDAPDP,"ignore-ldap-dp", N_("ignore LDAP CRL distribution points")), ARGPARSE_s_s (oLDAPProxy, "ldap-proxy", N_("|HOST|use HOST for LDAP queries")), ARGPARSE_s_n (oOnlyLDAPProxy, "only-ldap-proxy", N_("do not use fallback hosts with --ldap-proxy")), ARGPARSE_s_s (oLDAPFile, "ldapserverlist-file", N_("|FILE|read LDAP server list from FILE")), ARGPARSE_s_n (oLDAPAddServers, "add-servers", N_("add new servers discovered in CRL distribution" " points to serverlist")), ARGPARSE_s_i (oLDAPTimeout, "ldaptimeout", N_("|N|set LDAP timeout to N seconds")), ARGPARSE_header ("OCSP", N_("Configuration for OCSP")), ARGPARSE_s_n (oAllowOCSP, "allow-ocsp", N_("allow sending OCSP requests")), ARGPARSE_s_n (oIgnoreOCSPSvcUrl, "ignore-ocsp-service-url", N_("ignore certificate contained OCSP service URLs")), ARGPARSE_s_s (oOCSPResponder, "ocsp-responder", N_("|URL|use OCSP responder at URL")), ARGPARSE_s_s (oOCSPSigner, "ocsp-signer", N_("|FPR|OCSP response signed by FPR")), ARGPARSE_s_i (oOCSPMaxClockSkew, "ocsp-max-clock-skew", "@"), ARGPARSE_s_i (oOCSPMaxPeriod, "ocsp-max-period", "@"), ARGPARSE_s_i (oOCSPCurrentPeriod, "ocsp-current-period", "@"), ARGPARSE_header (NULL, N_("Other options")), ARGPARSE_s_n (oForce, "force", N_("force loading of outdated CRLs")), ARGPARSE_s_s (oSocketName, "socket-name", "@"), /* Only for debugging. */ ARGPARSE_header (NULL, ""), /* Stop the header group. */ /* Not yet used options. */ ARGPARSE_s_n (oBatch, "batch", "@"), ARGPARSE_s_s (oHTTPWrapperProgram, "http-wrapper-program", "@"), ARGPARSE_group (302,N_("@\n(See the \"info\" manual for a complete listing " "of all commands and options)\n")), ARGPARSE_end () }; /* The list of supported debug flags. */ static struct debug_flags_s debug_flags [] = { { DBG_X509_VALUE , "x509" }, { DBG_CRYPTO_VALUE , "crypto" }, { DBG_MEMORY_VALUE , "memory" }, { DBG_CACHE_VALUE , "cache" }, { DBG_MEMSTAT_VALUE, "memstat" }, { DBG_HASHING_VALUE, "hashing" }, { DBG_IPC_VALUE , "ipc" }, { DBG_DNS_VALUE , "dns" }, { DBG_NETWORK_VALUE, "network" }, { DBG_LOOKUP_VALUE , "lookup" }, { DBG_EXTPROG_VALUE, "extprog" }, { 77, NULL } /* 77 := Do not exit on "help" or "?". */ }; #define DEFAULT_MAX_REPLIES 10 #define DEFAULT_LDAP_TIMEOUT 15 /* seconds */ #define DEFAULT_CONNECT_TIMEOUT (15*1000) /* 15 seconds */ #define DEFAULT_CONNECT_QUICK_TIMEOUT ( 2*1000) /* 2 seconds */ /* For the cleanup handler we need to keep track of the socket's name. */ static const char *socket_name; /* If the socket has been redirected, this is the name of the redirected socket.. */ static const char *redir_socket_name; /* We need to keep track of the server's nonces (these are dummies for POSIX systems). */ static assuan_sock_nonce_t socket_nonce; /* Value for the listen() backlog argument. * Change at runtime with --listen-backlog. */ static int listen_backlog = 64; /* Only if this flag has been set will we remove the socket file. */ static int cleanup_socket; /* Keep track of the current log file so that we can avoid updating the log file after a SIGHUP if it didn't changed. Malloced. */ static char *current_logfile; /* Helper to implement --debug-level. */ static const char *debug_level; /* Helper to set the NTBTLS or GNUTLS log level. */ static int opt_gnutls_debug = -1; /* Flag indicating that a shutdown has been requested. */ static volatile int shutdown_pending; /* Flags to indicate that we shall not watch our own socket. */ static int disable_check_own_socket; /* Flag to control the Tor mode. */ static enum { TOR_MODE_AUTO = 0, /* Switch to NO or YES */ TOR_MODE_NEVER, /* Never use Tor. */ TOR_MODE_NO, /* Do not use Tor */ TOR_MODE_YES, /* Use Tor */ TOR_MODE_FORCE /* Force using Tor */ } tor_mode; /* Counter for the active connections. */ static int active_connections; /* This flag is set by any network access and used by the housekeeping * thread to run background network tasks. */ static int network_activity_seen; /* A list of filenames registered with --hkp-cacert. */ static strlist_t hkp_cacert_filenames; /* The timer tick used for housekeeping stuff. The second constant is used when a shutdown is pending. */ #define TIMERTICK_INTERVAL (60) #define TIMERTICK_INTERVAL_SHUTDOWN (4) /* How oft to run the housekeeping. */ #define HOUSEKEEPING_INTERVAL (600) /* This union is used to avoid compiler warnings in case a pointer is 64 bit and an int 32 bit. We store an integer in a pointer and get it back later (npth_getspecific et al.). */ union int_and_ptr_u { int aint; assuan_fd_t afd; void *aptr; }; /* The key used to store the current file descriptor in the thread local storage. We use this in conjunction with the log_set_pid_suffix_cb feature. */ #ifndef HAVE_W32_SYSTEM static npth_key_t my_tlskey_current_fd; #endif /* Prototypes. */ static void cleanup (void); #if USE_LDAP static ldap_server_t parse_ldapserver_file (const char* filename, int ienoent); #endif /*USE_LDAP*/ static fingerprint_list_t parse_ocsp_signer (const char *string); static void netactivity_action (void); static void handle_connections (assuan_fd_t listen_fd); static void gpgconf_versions (void); /* NPth wrapper function definitions. */ ASSUAN_SYSTEM_NPTH_IMPL; static const char * my_strusage( int level ) { const char *p; switch ( level ) { case 9: p = "GPL-3.0-or-later"; break; case 11: p = "@DIRMNGR@ (@GNUPG@)"; break; case 13: p = VERSION; break; case 14: p = GNUPG_DEF_COPYRIGHT_LINE; break; case 17: p = PRINTABLE_OS_NAME; break; /* TRANSLATORS: @EMAIL@ will get replaced by the actual bug reporting address. This is so that we can change the reporting address without breaking the translations. */ case 19: p = _("Please report bugs to <@EMAIL@>.\n"); break; case 49: p = PACKAGE_BUGREPORT; break; case 1: case 40: p = _("Usage: @DIRMNGR@ [options] (-h for help)"); break; case 41: p = _("Syntax: @DIRMNGR@ [options] [command [args]]\n" "Keyserver, CRL, and OCSP access for @GNUPG@\n"); break; default: p = NULL; } return p; } /* Callback from libksba to hash a provided buffer. Our current implementation does only allow SHA-1 for hashing. This may be extended by mapping the name, testing for algorithm availability and adjust the length checks accordingly. */ static gpg_error_t my_ksba_hash_buffer (void *arg, const char *oid, const void *buffer, size_t length, size_t resultsize, unsigned char *result, size_t *resultlen) { (void)arg; if (oid && strcmp (oid, "1.3.14.3.2.26")) return gpg_error (GPG_ERR_NOT_SUPPORTED); if (resultsize < 20) return gpg_error (GPG_ERR_BUFFER_TOO_SHORT); gcry_md_hash_buffer (2, result, buffer, length); *resultlen = 20; return 0; } /* GNUTLS log function callback. */ #ifdef HTTP_USE_GNUTLS static void my_gnutls_log (int level, const char *text) { int n; n = strlen (text); while (n && text[n-1] == '\n') n--; log_debug ("gnutls:L%d: %.*s\n", level, n, text); } #endif /*HTTP_USE_GNUTLS*/ /* Setup the debugging. With a LEVEL of NULL only the active debug flags are propagated to the subsystems. With LEVEL set, a specific set of debug flags is set; thus overriding all flags already set. */ static void set_debug (void) { int numok = (debug_level && digitp (debug_level)); int numlvl = numok? atoi (debug_level) : 0; if (!debug_level) ; else if (!strcmp (debug_level, "none") || (numok && numlvl < 1)) opt.debug = 0; else if (!strcmp (debug_level, "basic") || (numok && numlvl <= 2)) opt.debug = DBG_IPC_VALUE; else if (!strcmp (debug_level, "advanced") || (numok && numlvl <= 5)) opt.debug = (DBG_IPC_VALUE|DBG_X509_VALUE|DBG_LOOKUP_VALUE); else if (!strcmp (debug_level, "expert") || (numok && numlvl <= 8)) opt.debug = (DBG_IPC_VALUE|DBG_X509_VALUE|DBG_LOOKUP_VALUE |DBG_CACHE_VALUE|DBG_CRYPTO_VALUE); else if (!strcmp (debug_level, "guru") || numok) { opt.debug = ~0; /* Unless the "guru" string has been used we don't want to allow hashing debugging. The rationale is that people tend to select the highest debug value and would then clutter their disk with debug files which may reveal confidential data. */ if (numok) opt.debug &= ~(DBG_HASHING_VALUE); } else { log_error (_("invalid debug-level '%s' given\n"), debug_level); log_info (_("valid debug levels are: %s\n"), "none, basic, advanced, expert, guru"); opt.debug = 0; /* Reset debugging, so that prior debug statements won't have an undesired effect. */ } if (opt.debug && !opt.verbose) { opt.verbose = 1; gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose); } if (opt.debug && opt.quiet) opt.quiet = 0; if (opt.debug & DBG_CRYPTO_VALUE ) gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 1); #if HTTP_USE_NTBTLS if (opt_gnutls_debug >= 0) { ntbtls_set_debug (opt_gnutls_debug, NULL, NULL); } #elif HTTP_USE_GNUTLS if (opt_gnutls_debug >= 0) { gnutls_global_set_log_function (my_gnutls_log); gnutls_global_set_log_level (opt_gnutls_debug); } #endif /*HTTP_USE_GNUTLS*/ if (opt.debug) parse_debug_flag (NULL, &opt.debug, debug_flags); } static void set_tor_mode (void) { if (dirmngr_use_tor ()) { /* Enable Tor mode and when called again force a new circuit * (e.g. on SIGHUP). */ enable_dns_tormode (1); if (assuan_sock_set_flag (ASSUAN_INVALID_FD, "tor-mode", 1)) { log_error ("error enabling Tor mode: %s\n", strerror (errno)); log_info ("(is your Libassuan recent enough?)\n"); } } else disable_dns_tormode (); } /* Return true if Tor shall be used. */ int dirmngr_use_tor (void) { if (tor_mode == TOR_MODE_AUTO) { /* Figure out whether Tor is running. */ assuan_fd_t sock; sock = assuan_sock_connect_byname (NULL, 0, 0, NULL, ASSUAN_SOCK_TOR); if (sock == ASSUAN_INVALID_FD) tor_mode = TOR_MODE_NO; else { tor_mode = TOR_MODE_YES; assuan_sock_close (sock); } } if (tor_mode == TOR_MODE_FORCE) return 2; /* Use Tor (using 2 to indicate force mode) */ else if (tor_mode == TOR_MODE_YES) return 1; /* Use Tor */ else return 0; /* Do not use Tor. */ } static void wrong_args (const char *text) { es_fprintf (es_stderr, _("usage: %s [options] "), DIRMNGR_NAME); es_fputs (text, es_stderr); es_putc ('\n', es_stderr); dirmngr_exit (2); } /* Helper to stop the reaper thread for the ldap wrapper. */ static void shutdown_reaper (void) { #if USE_LDAP ldap_wrapper_wait_connections (); #endif } /* Handle options which are allowed to be reset after program start. Return true if the current option in PARGS could be handled and false if not. As a special feature, passing a value of NULL for PARGS, resets the options to the default. REREAD should be set true if it is not the initial option parsing. */ static int parse_rereadable_options (gpgrt_argparse_t *pargs, int reread) { if (!pargs) { /* Reset mode. */ opt.quiet = 0; opt.verbose = 0; opt.debug = 0; opt.ldap_wrapper_program = NULL; opt.disable_http = 0; opt.disable_ldap = 0; opt.honor_http_proxy = 0; opt.http_proxy = NULL; opt.ldap_proxy = NULL; opt.only_ldap_proxy = 0; opt.ignore_http_dp = 0; opt.ignore_ldap_dp = 0; opt.ignore_ocsp_service_url = 0; opt.allow_ocsp = 0; opt.allow_version_check = 0; opt.ocsp_responder = NULL; opt.ocsp_max_clock_skew = 10 * 60; /* 10 minutes. */ opt.ocsp_max_period = 90 * 86400; /* 90 days. */ opt.ocsp_current_period = 3 * 60 * 60; /* 3 hours. */ opt.max_replies = DEFAULT_MAX_REPLIES; while (opt.ocsp_signer) { fingerprint_list_t tmp = opt.ocsp_signer->next; xfree (opt.ocsp_signer); opt.ocsp_signer = tmp; } FREE_STRLIST (opt.ignored_cert_extensions); http_register_tls_ca (NULL); FREE_STRLIST (hkp_cacert_filenames); FREE_STRLIST (opt.keyserver); /* Note: We do not allow resetting of TOR_MODE_FORCE at runtime. */ if (tor_mode != TOR_MODE_FORCE) tor_mode = TOR_MODE_AUTO; disable_check_own_socket = 0; enable_standard_resolver (0); set_dns_timeout (0); opt.connect_timeout = 0; opt.connect_quick_timeout = 0; return 1; } switch (pargs->r_opt) { case oQuiet: opt.quiet = 1; break; case oVerbose: opt.verbose++; break; case oDebug: parse_debug_flag (pargs->r.ret_str, &opt.debug, debug_flags); break; case oDebugAll: opt.debug = ~0; break; case oDebugLevel: debug_level = pargs->r.ret_str; break; case oGnutlsDebug: opt_gnutls_debug = pargs->r.ret_int; break; case oLogFile: if (!reread) return 0; /* Not handled. */ if (!current_logfile || !pargs->r.ret_str || strcmp (current_logfile, pargs->r.ret_str)) { log_set_file (pargs->r.ret_str); xfree (current_logfile); current_logfile = xtrystrdup (pargs->r.ret_str); } break; case oDisableCheckOwnSocket: disable_check_own_socket = 1; break; case oLDAPWrapperProgram: opt.ldap_wrapper_program = pargs->r.ret_str; break; case oHTTPWrapperProgram: opt.http_wrapper_program = pargs->r.ret_str; break; case oDisableHTTP: opt.disable_http = 1; break; case oDisableLDAP: opt.disable_ldap = 1; break; case oDisableIPv4: opt.disable_ipv4 = 1; break; case oDisableIPv6: opt.disable_ipv6 = 1; break; case oHonorHTTPProxy: opt.honor_http_proxy = 1; break; case oHTTPProxy: opt.http_proxy = pargs->r.ret_str; break; case oLDAPProxy: opt.ldap_proxy = pargs->r.ret_str; break; case oOnlyLDAPProxy: opt.only_ldap_proxy = 1; break; case oIgnoreHTTPDP: opt.ignore_http_dp = 1; break; case oIgnoreLDAPDP: opt.ignore_ldap_dp = 1; break; case oIgnoreOCSPSvcUrl: opt.ignore_ocsp_service_url = 1; break; case oAllowOCSP: opt.allow_ocsp = 1; break; case oAllowVersionCheck: opt.allow_version_check = 1; break; case oOCSPResponder: opt.ocsp_responder = pargs->r.ret_str; break; case oOCSPSigner: opt.ocsp_signer = parse_ocsp_signer (pargs->r.ret_str); break; case oOCSPMaxClockSkew: opt.ocsp_max_clock_skew = pargs->r.ret_int; break; case oOCSPMaxPeriod: opt.ocsp_max_period = pargs->r.ret_int; break; case oOCSPCurrentPeriod: opt.ocsp_current_period = pargs->r.ret_int; break; case oMaxReplies: opt.max_replies = pargs->r.ret_int; break; case oHkpCaCert: { /* We need to register the filenames with gnutls (http.c) and * also for our own cert cache. */ char *tmpname; /* Do tilde expansion and make path absolute. */ tmpname = make_absfilename (pargs->r.ret_str, NULL); http_register_tls_ca (tmpname); add_to_strlist (&hkp_cacert_filenames, pargs->r.ret_str); xfree (tmpname); } break; case oIgnoreCertExtension: add_to_strlist (&opt.ignored_cert_extensions, pargs->r.ret_str); break; case oUseTor: tor_mode = TOR_MODE_FORCE; break; case oNoUseTor: if (tor_mode != TOR_MODE_FORCE) tor_mode = TOR_MODE_NEVER; break; case oStandardResolver: enable_standard_resolver (1); break; case oRecursiveResolver: enable_recursive_resolver (1); break; case oKeyServer: if (*pargs->r.ret_str) add_to_strlist (&opt.keyserver, pargs->r.ret_str); break; case oNameServer: set_dns_nameserver (pargs->r.ret_str); break; case oResolverTimeout: set_dns_timeout (pargs->r.ret_int); break; case oConnectTimeout: opt.connect_timeout = pargs->r.ret_ulong * 1000; break; case oConnectQuickTimeout: opt.connect_quick_timeout = pargs->r.ret_ulong * 1000; break; default: return 0; /* Not handled. */ } set_dns_verbose (opt.verbose, !!DBG_DNS); http_set_verbose (opt.verbose, !!DBG_NETWORK); set_dns_disable_ipv4 (opt.disable_ipv4); set_dns_disable_ipv6 (opt.disable_ipv6); return 1; /* Handled. */ } /* This function is called after option parsing to adjust some values * and call option setup functions. */ static void post_option_parsing (void) { /* It would be too surpirsing if the quick timeout is larger than * the standard value. */ if (opt.connect_quick_timeout > opt.connect_timeout) opt.connect_quick_timeout = opt.connect_timeout; set_debug (); } #ifndef HAVE_W32_SYSTEM static int pid_suffix_callback (unsigned long *r_suffix) { union int_and_ptr_u value; memset (&value, 0, sizeof value); value.aptr = npth_getspecific (my_tlskey_current_fd); *r_suffix = value.aint; return (*r_suffix != -1); /* Use decimal representation. */ } #endif /*!HAVE_W32_SYSTEM*/ #if HTTP_USE_NTBTLS static void my_ntbtls_log_handler (void *opaque, int level, const char *fmt, va_list argv) { (void)opaque; if (level == -1) log_logv_prefix (GPGRT_LOGLVL_INFO, "ntbtls: ", fmt, argv); else { char prefix[10+20]; snprintf (prefix, sizeof prefix, "ntbtls(%d): ", level); log_logv_prefix (GPGRT_LOGLVL_DEBUG, prefix, fmt, argv); } } #endif static void thread_init (void) { npth_init (); assuan_set_system_hooks (ASSUAN_SYSTEM_NPTH); gpgrt_set_syscall_clamp (npth_unprotect, npth_protect); /* Now with NPth running we can set the logging callback. Our windows implementation does not yet feature the NPth TLS functions. */ #ifndef HAVE_W32_SYSTEM if (npth_key_create (&my_tlskey_current_fd, NULL) == 0) if (npth_setspecific (my_tlskey_current_fd, NULL) == 0) log_set_pid_suffix_cb (pid_suffix_callback); #endif /*!HAVE_W32_SYSTEM*/ } int main (int argc, char **argv) { enum cmd_and_opt_values cmd = 0; gpgrt_argparse_t pargs; int orig_argc; char **orig_argv; char *last_configname = NULL; const char *configname = NULL; const char *shell; int debug_argparser = 0; int greeting = 0; int nogreeting = 0; int nodetach = 0; int csh_style = 0; char *logfile = NULL; #if USE_LDAP char *ldapfile = NULL; #endif /*USE_LDAP*/ int debug_wait = 0; int rc; struct assuan_malloc_hooks malloc_hooks; early_system_init (); gpgrt_set_strusage (my_strusage); log_set_prefix (DIRMNGR_NAME, GPGRT_LOG_WITH_PREFIX | GPGRT_LOG_WITH_PID); /* Make sure that our subsystems are ready. */ i18n_init (); init_common_subsystems (&argc, &argv); gcry_control (GCRYCTL_DISABLE_SECMEM, 0); /* Check that the libraries are suitable. Do it here because the option parsing may need services of the libraries. */ if (!ksba_check_version (NEED_KSBA_VERSION) ) log_fatal( _("%s is too old (need %s, have %s)\n"), "libksba", NEED_KSBA_VERSION, ksba_check_version (NULL) ); ksba_set_malloc_hooks (gcry_malloc, gcry_realloc, gcry_free ); ksba_set_hash_buffer_function (my_ksba_hash_buffer, NULL); /* Init TLS library. */ #if HTTP_USE_NTBTLS if (!ntbtls_check_version (NEED_NTBTLS_VERSION) ) log_fatal( _("%s is too old (need %s, have %s)\n"), "ntbtls", NEED_NTBTLS_VERSION, ntbtls_check_version (NULL) ); #elif HTTP_USE_GNUTLS rc = gnutls_global_init (); if (rc) log_fatal ("gnutls_global_init failed: %s\n", gnutls_strerror (rc)); #endif /*HTTP_USE_GNUTLS*/ /* Init Assuan. */ malloc_hooks.malloc = gcry_malloc; malloc_hooks.realloc = gcry_realloc; malloc_hooks.free = gcry_free; assuan_set_malloc_hooks (&malloc_hooks); assuan_set_assuan_log_prefix (log_get_prefix (NULL)); assuan_set_gpg_err_source (GPG_ERR_SOURCE_DEFAULT); assuan_sock_init (); setup_libassuan_logging (&opt.debug, dirmngr_assuan_log_monitor); setup_libgcrypt_logging (); #if HTTP_USE_NTBTLS ntbtls_set_log_handler (my_ntbtls_log_handler, NULL); #endif /* Setup defaults. */ shell = getenv ("SHELL"); if (shell && strlen (shell) >= 3 && !strcmp (shell+strlen (shell)-3, "csh") ) csh_style = 1; /* Reset rereadable options to default values. */ parse_rereadable_options (NULL, 0); /* Default TCP timeouts. */ opt.connect_timeout = DEFAULT_CONNECT_TIMEOUT; opt.connect_quick_timeout = DEFAULT_CONNECT_QUICK_TIMEOUT; /* LDAP defaults. */ opt.add_new_ldapservers = 0; opt.ldaptimeout = DEFAULT_LDAP_TIMEOUT; /* Other defaults. */ /* Check whether we have a config file given on the commandline */ orig_argc = argc; orig_argv = argv; pargs.argc = &argc; pargs.argv = &argv; pargs.flags= (ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); while (gpgrt_argparse (NULL, &pargs, opts)) { switch (pargs.r_opt) { case oDebug: case oDebugAll: debug_argparser++; break; case oHomedir: gnupg_set_homedir (pargs.r.ret_str); break; } } /* Reset the flags. */ pargs.flags &= ~(ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); socket_name = dirmngr_socket_name (); /* The configuraton directories for use by gpgrt_argparser. */ gpgrt_set_confdir (GPGRT_CONFDIR_SYS, gnupg_sysconfdir ()); gpgrt_set_confdir (GPGRT_CONFDIR_USER, gnupg_homedir ()); /* We are re-using the struct, thus the reset flag. We OR the * flags so that the internal intialized flag won't be cleared. */ argc = orig_argc; argv = orig_argv; pargs.argc = &argc; pargs.argv = &argv; pargs.flags |= (ARGPARSE_FLAG_RESET | ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_SYS | ARGPARSE_FLAG_USER); while (gpgrt_argparser (&pargs, opts, DIRMNGR_NAME EXTSEP_S "conf")) { if (pargs.r_opt == ARGPARSE_CONFFILE) { if (debug_argparser) log_info (_("reading options from '%s'\n"), pargs.r_type? pargs.r.ret_str: "[cmdline]"); if (pargs.r_type) { xfree (last_configname); last_configname = xstrdup (pargs.r.ret_str); configname = last_configname; } else configname = NULL; continue; } if (parse_rereadable_options (&pargs, 0)) continue; /* Already handled */ switch (pargs.r_opt) { case aServer: case aDaemon: case aSupervised: case aShutdown: case aFlush: case aListCRLs: case aLoadCRL: case aFetchCRL: case aGPGConfList: case aGPGConfTest: case aGPGConfVersions: cmd = pargs.r_opt; break; case oQuiet: opt.quiet = 1; break; case oVerbose: opt.verbose++; break; case oBatch: opt.batch=1; break; case oDebugWait: debug_wait = pargs.r.ret_int; break; case oNoGreeting: nogreeting = 1; break; case oNoVerbose: opt.verbose = 0; break; case oHomedir: /* Ignore this option here. */; break; case oNoDetach: nodetach = 1; break; case oLogFile: logfile = pargs.r.ret_str; break; case oCsh: csh_style = 1; break; case oSh: csh_style = 0; break; case oLDAPFile: # if USE_LDAP ldapfile = pargs.r.ret_str; # endif /*USE_LDAP*/ break; case oLDAPAddServers: opt.add_new_ldapservers = 1; break; case oLDAPTimeout: opt.ldaptimeout = pargs.r.ret_int; break; case oFakedSystemTime: gnupg_set_time ((time_t)pargs.r.ret_ulong, 0); break; case oForce: opt.force = 1; break; case oSocketName: socket_name = pargs.r.ret_str; break; case oListenBacklog: listen_backlog = pargs.r.ret_int; break; default: if (configname) pargs.err = ARGPARSE_PRINT_WARNING; else pargs.err = ARGPARSE_PRINT_ERROR; break; } } gpgrt_argparse (NULL, &pargs, NULL); /* Release internal state. */ if (!last_configname) opt.config_filename = gpgrt_fnameconcat (gnupg_homedir (), DIRMNGR_NAME EXTSEP_S "conf", NULL); else { opt.config_filename = last_configname; last_configname = NULL; } if (log_get_errorcount(0)) exit(2); + + /* Get a default log file from common.conf. */ + if (!logfile && !parse_comopt (GNUPG_MODULE_NAME_DIRMNGR, debug_argparser)) + { + logfile = comopt.logfile; + comopt.logfile = NULL; + } + if (nogreeting ) greeting = 0; if (!opt.homedir_cache) opt.homedir_cache = xstrdup (gnupg_homedir ()); if (greeting) { es_fprintf (es_stderr, "%s %s; %s\n", gpgrt_strusage(11), gpgrt_strusage(13), gpgrt_strusage(14)); es_fprintf (es_stderr, "%s\n", gpgrt_strusage(15)); } #ifdef IS_DEVELOPMENT_VERSION log_info ("NOTE: this is a development version!\n"); #endif /* Print a warning if an argument looks like an option. */ if (!opt.quiet && !(pargs.flags & ARGPARSE_FLAG_STOP_SEEN)) { int i; for (i=0; i < argc; i++) if (argv[i][0] == '-' && argv[i][1] == '-') log_info (_("Note: '%s' is not considered an option\n"), argv[i]); } if (!gnupg_access ("/etc/"DIRMNGR_NAME, F_OK) && !strncmp (gnupg_homedir (), "/etc/", 5)) log_info ("NOTE: DirMngr is now a proper part of %s. The configuration and" " other directory names changed. Please check that no other version" " of dirmngr is still installed. To disable this warning, remove the" " directory '/etc/dirmngr'.\n", GNUPG_NAME); if (gnupg_faked_time_p ()) { gnupg_isotime_t tbuf; log_info (_("WARNING: running with faked system time: ")); gnupg_get_isotime (tbuf); dump_isotime (tbuf); log_printf ("\n"); } /* Note that we do not run set_tor_mode in --gpgconf-list mode * because it will attempt to connect to the tor client and that can * be time consuming. */ post_option_parsing (); if (cmd != aGPGConfTest && cmd != aGPGConfList && cmd != aGPGConfVersions) set_tor_mode (); /* Get LDAP server list from file. */ #if USE_LDAP if (!ldapfile) { ldapfile = make_filename (gnupg_homedir (), "dirmngr_ldapservers.conf", NULL); opt.ldapservers = parse_ldapserver_file (ldapfile, 1); xfree (ldapfile); } else opt.ldapservers = parse_ldapserver_file (ldapfile, 0); #endif /*USE_LDAP*/ #ifndef HAVE_W32_SYSTEM /* We need to ignore the PIPE signal because the we might log to a socket and that code handles EPIPE properly. The ldap wrapper also requires us to ignore this silly signal. Assuan would set this signal to ignore anyway.*/ signal (SIGPIPE, SIG_IGN); #endif /* Ready. Now to our duties. */ if (!cmd) cmd = aServer; rc = 0; if (cmd == aServer) { /* Note that this server mode is mainly useful for debugging. */ if (argc) wrong_args ("--server"); if (logfile) { log_set_file (logfile); log_set_prefix (NULL, GPGRT_LOG_WITH_TIME | GPGRT_LOG_WITH_PID); } if (debug_wait) { log_debug ("waiting for debugger - my pid is %u .....\n", (unsigned int)getpid()); gnupg_sleep (debug_wait); log_debug ("... okay\n"); } thread_init (); cert_cache_init (hkp_cacert_filenames); crl_cache_init (); ks_hkp_init (); http_register_netactivity_cb (netactivity_action); start_command_handler (ASSUAN_INVALID_FD, 0); shutdown_reaper (); } #ifndef HAVE_W32_SYSTEM else if (cmd == aSupervised) { /* In supervised mode, we expect file descriptor 3 to be an already opened, listening socket. We will also not detach from the controlling process or close stderr; the supervisor should handle all of that. */ struct stat statbuf; if (fstat (3, &statbuf) == -1 && errno == EBADF) { log_error ("file descriptor 3 must be validin --supervised mode\n"); dirmngr_exit (1); } socket_name = gnupg_get_socket_name (3); /* Now start with logging to a file if this is desired. */ if (logfile) { log_set_file (logfile); log_set_prefix (NULL, (GPGRT_LOG_WITH_PREFIX |GPGRT_LOG_WITH_TIME |GPGRT_LOG_WITH_PID)); current_logfile = xstrdup (logfile); } else log_set_prefix (NULL, 0); thread_init (); cert_cache_init (hkp_cacert_filenames); crl_cache_init (); ks_hkp_init (); http_register_netactivity_cb (netactivity_action); handle_connections (3); shutdown_reaper (); } #endif /*HAVE_W32_SYSTEM*/ else if (cmd == aDaemon) { assuan_fd_t fd; pid_t pid; int len; struct sockaddr_un serv_addr; if (argc) wrong_args ("--daemon"); /* Now start with logging to a file if this is desired. */ if (logfile) { log_set_file (logfile); log_set_prefix (NULL, (GPGRT_LOG_WITH_PREFIX |GPGRT_LOG_WITH_TIME |GPGRT_LOG_WITH_PID)); current_logfile = xstrdup (logfile); } if (debug_wait) { log_debug ("waiting for debugger - my pid is %u .....\n", (unsigned int)getpid()); gnupg_sleep (debug_wait); log_debug ("... okay\n"); } #ifndef HAVE_W32_SYSTEM if (strchr (socket_name, ':')) { log_error (_("colons are not allowed in the socket name\n")); dirmngr_exit (1); } #endif fd = assuan_sock_new (AF_UNIX, SOCK_STREAM, 0); if (fd == ASSUAN_INVALID_FD) { log_error (_("can't create socket: %s\n"), strerror (errno)); cleanup (); dirmngr_exit (1); } { int redirected; if (assuan_sock_set_sockaddr_un (socket_name, (struct sockaddr*)&serv_addr, &redirected)) { if (errno == ENAMETOOLONG) log_error (_("socket name '%s' is too long\n"), socket_name); else log_error ("error preparing socket '%s': %s\n", socket_name, gpg_strerror (gpg_error_from_syserror ())); dirmngr_exit (1); } if (redirected) { redir_socket_name = xstrdup (serv_addr.sun_path); if (opt.verbose) log_info ("redirecting socket '%s' to '%s'\n", socket_name, redir_socket_name); } } len = SUN_LEN (&serv_addr); rc = assuan_sock_bind (fd, (struct sockaddr*) &serv_addr, len); if (rc == -1 && (errno == EADDRINUSE #ifdef HAVE_W32_SYSTEM || errno == EEXIST #endif )) { /* Fixme: We should test whether a dirmngr is already running. */ gnupg_remove (redir_socket_name? redir_socket_name : socket_name); rc = assuan_sock_bind (fd, (struct sockaddr*) &serv_addr, len); } if (rc != -1 && (rc = assuan_sock_get_nonce ((struct sockaddr*) &serv_addr, len, &socket_nonce))) log_error (_("error getting nonce for the socket\n")); if (rc == -1) { log_error (_("error binding socket to '%s': %s\n"), serv_addr.sun_path, gpg_strerror (gpg_error_from_syserror ())); assuan_sock_close (fd); dirmngr_exit (1); } cleanup_socket = 1; if (gnupg_chmod (serv_addr.sun_path, "-rwx")) log_error (_("can't set permissions of '%s': %s\n"), serv_addr.sun_path, strerror (errno)); if (listen (FD2INT (fd), listen_backlog) == -1) { log_error ("listen(fd,%d) failed: %s\n", listen_backlog, strerror (errno)); assuan_sock_close (fd); dirmngr_exit (1); } if (opt.verbose) log_info (_("listening on socket '%s'\n"), serv_addr.sun_path); es_fflush (NULL); /* Note: We keep the dirmngr_info output only for the sake of existing scripts which might use this to detect a successful start of the dirmngr. */ #ifdef HAVE_W32_SYSTEM (void)csh_style; (void)nodetach; pid = getpid (); es_printf ("set %s=%s;%lu;1\n", DIRMNGR_INFO_NAME, socket_name, (ulong) pid); #else pid = fork(); if (pid == (pid_t)-1) { log_fatal (_("error forking process: %s\n"), strerror (errno)); dirmngr_exit (1); } if (pid) { /* We are the parent */ char *infostr; /* Don't let cleanup() remove the socket - the child is responsible for doing that. */ cleanup_socket = 0; close (fd); /* Create the info string: :: */ if (asprintf (&infostr, "%s=%s:%lu:1", DIRMNGR_INFO_NAME, serv_addr.sun_path, (ulong)pid ) < 0) { log_error (_("out of core\n")); kill (pid, SIGTERM); dirmngr_exit (1); } /* Print the environment string, so that the caller can use shell's eval to set it. But see above. */ if (csh_style) { *strchr (infostr, '=') = ' '; es_printf ( "setenv %s;\n", infostr); } else { es_printf ( "%s; export %s;\n", infostr, DIRMNGR_INFO_NAME); } free (infostr); exit (0); /*NEVER REACHED*/ } /* end parent */ /* This is the child */ /* Detach from tty and put process into a new session */ if (!nodetach ) { int i; unsigned int oldflags; /* Close stdin, stdout and stderr unless it is the log stream */ for (i=0; i <= 2; i++) { if (!log_test_fd (i) && i != fd ) { if ( !close (i) && open ("/dev/null", i? O_WRONLY : O_RDONLY) == -1) { log_error ("failed to open '%s': %s\n", "/dev/null", strerror (errno)); cleanup (); dirmngr_exit (1); } } } if (setsid() == -1) { log_error ("setsid() failed: %s\n", strerror(errno) ); dirmngr_exit (1); } log_get_prefix (&oldflags); log_set_prefix (NULL, oldflags | GPGRT_LOG_RUN_DETACHED); opt.running_detached = 1; } #endif if (!nodetach ) { if (gnupg_chdir (gnupg_daemon_rootdir ())) { log_error ("chdir to '%s' failed: %s\n", gnupg_daemon_rootdir (), strerror (errno)); dirmngr_exit (1); } } thread_init (); cert_cache_init (hkp_cacert_filenames); crl_cache_init (); ks_hkp_init (); http_register_netactivity_cb (netactivity_action); handle_connections (fd); shutdown_reaper (); } else if (cmd == aListCRLs) { /* Just list the CRL cache and exit. */ if (argc) wrong_args ("--list-crls"); crl_cache_init (); crl_cache_list (es_stdout); } else if (cmd == aLoadCRL) { struct server_control_s ctrlbuf; memset (&ctrlbuf, 0, sizeof ctrlbuf); dirmngr_init_default_ctrl (&ctrlbuf); thread_init (); cert_cache_init (hkp_cacert_filenames); crl_cache_init (); ks_hkp_init (); if (!argc) rc = crl_cache_load (&ctrlbuf, NULL); else { for (; !rc && argc; argc--, argv++) rc = crl_cache_load (&ctrlbuf, *argv); } dirmngr_deinit_default_ctrl (&ctrlbuf); } else if (cmd == aFetchCRL) { ksba_reader_t reader; struct server_control_s ctrlbuf; if (argc != 1) wrong_args ("--fetch-crl URL"); memset (&ctrlbuf, 0, sizeof ctrlbuf); dirmngr_init_default_ctrl (&ctrlbuf); thread_init (); cert_cache_init (hkp_cacert_filenames); crl_cache_init (); ks_hkp_init (); rc = crl_fetch (&ctrlbuf, argv[0], &reader); if (rc) log_error (_("fetching CRL from '%s' failed: %s\n"), argv[0], gpg_strerror (rc)); else { rc = crl_cache_insert (&ctrlbuf, argv[0], reader); if (rc) log_error (_("processing CRL from '%s' failed: %s\n"), argv[0], gpg_strerror (rc)); crl_close_reader (reader); } dirmngr_deinit_default_ctrl (&ctrlbuf); } else if (cmd == aFlush) { /* Delete cache and exit. */ if (argc) wrong_args ("--flush"); rc = crl_cache_flush(); } else if (cmd == aGPGConfTest) dirmngr_exit (0); else if (cmd == aGPGConfList) { unsigned long flags = 0; char *filename_esc; es_printf ("debug-level:%lu:\"none\n", flags | GC_OPT_FLAG_DEFAULT); es_printf ("ldaptimeout:%lu:%u\n", flags | GC_OPT_FLAG_DEFAULT, DEFAULT_LDAP_TIMEOUT); es_printf ("max-replies:%lu:%u\n", flags | GC_OPT_FLAG_DEFAULT, DEFAULT_MAX_REPLIES); filename_esc = percent_escape (get_default_keyserver (0), NULL); es_printf ("keyserver:%lu:\"%s:\n", flags | GC_OPT_FLAG_DEFAULT, filename_esc); xfree (filename_esc); es_printf ("resolver-timeout:%lu:%u\n", flags | GC_OPT_FLAG_DEFAULT, 0); } else if (cmd == aGPGConfVersions) gpgconf_versions (); cleanup (); return !!rc; } static void cleanup (void) { crl_cache_deinit (); cert_cache_deinit (1); reload_dns_stuff (1); #if USE_LDAP ldapserver_list_free (opt.ldapservers); #endif /*USE_LDAP*/ opt.ldapservers = NULL; if (cleanup_socket) { cleanup_socket = 0; if (redir_socket_name) gnupg_remove (redir_socket_name); else if (socket_name && *socket_name) gnupg_remove (socket_name); } } void dirmngr_exit (int rc) { cleanup (); exit (rc); } void dirmngr_init_default_ctrl (ctrl_t ctrl) { ctrl->magic = SERVER_CONTROL_MAGIC; if (opt.http_proxy) ctrl->http_proxy = xstrdup (opt.http_proxy); ctrl->http_no_crl = 1; ctrl->timeout = opt.connect_timeout; } void dirmngr_deinit_default_ctrl (ctrl_t ctrl) { if (!ctrl) return; ctrl->magic = 0xdeadbeef; xfree (ctrl->http_proxy); ctrl->http_proxy = NULL; } /* Create a list of LDAP servers from the file FILENAME. Returns the list or NULL in case of errors. The format of such a file is line oriented where empty lines and lines starting with a hash mark are ignored. All other lines are assumed to be colon seprated with these fields: 1. field: Hostname 2. field: Portnumber 3. field: Username 4. field: Password 5. field: Base DN */ #if USE_LDAP static ldap_server_t parse_ldapserver_file (const char* filename, int ignore_enoent) { char buffer[1024]; char *p; ldap_server_t server, serverstart, *serverend; int c; unsigned int lineno = 0; estream_t fp; fp = es_fopen (filename, "r"); if (!fp) { if (ignore_enoent && gpg_err_code_from_syserror () == GPG_ERR_ENOENT) ; else log_info ("failed to open '%s': %s\n", filename, strerror (errno)); return NULL; } serverstart = NULL; serverend = &serverstart; while (es_fgets (buffer, sizeof buffer, fp)) { lineno++; if (!*buffer || buffer[strlen(buffer)-1] != '\n') { if (*buffer && es_feof (fp)) ; /* Last line not terminated - continue. */ else { log_error (_("%s:%u: line too long - skipped\n"), filename, lineno); while ( (c=es_fgetc (fp)) != EOF && c != '\n') ; /* Skip until end of line. */ continue; } } /* Skip empty and comment lines.*/ for (p=buffer; spacep (p); p++) ; if (!*p || *p == '\n' || *p == '#') continue; /* Parse the colon separated fields. */ server = ldapserver_parse_one (buffer, filename, lineno); if (server) { *serverend = server; serverend = &server->next; } } if (es_ferror (fp)) log_error (_("error reading '%s': %s\n"), filename, strerror (errno)); es_fclose (fp); return serverstart; } #endif /*USE_LDAP*/ static fingerprint_list_t parse_ocsp_signer (const char *string) { gpg_error_t err; char *fname; estream_t fp; char line[256]; char *p; fingerprint_list_t list, *list_tail, item; unsigned int lnr = 0; int c, i, j; int errflag = 0; /* Check whether this is not a filename and treat it as a direct fingerprint specification. */ if (!strpbrk (string, "/.~\\")) { item = xcalloc (1, sizeof *item); for (i=j=0; (string[i] == ':' || hexdigitp (string+i)) && j < 40; i++) if ( string[i] != ':' ) item->hexfpr[j++] = string[i] >= 'a'? (string[i] & 0xdf): string[i]; item->hexfpr[j] = 0; if (j != 40 || !(spacep (string+i) || !string[i])) { log_error (_("%s:%u: invalid fingerprint detected\n"), "--ocsp-signer", 0); xfree (item); return NULL; } return item; } /* Well, it is a filename. */ if (*string == '/' || (*string == '~' && string[1] == '/')) fname = make_filename (string, NULL); else { if (string[0] == '.' && string[1] == '/' ) string += 2; fname = make_filename (gnupg_homedir (), string, NULL); } fp = es_fopen (fname, "r"); if (!fp) { err = gpg_error_from_syserror (); log_error (_("can't open '%s': %s\n"), fname, gpg_strerror (err)); xfree (fname); return NULL; } list = NULL; list_tail = &list; for (;;) { if (!es_fgets (line, DIM(line)-1, fp) ) { if (!es_feof (fp)) { err = gpg_error_from_syserror (); log_error (_("%s:%u: read error: %s\n"), fname, lnr, gpg_strerror (err)); errflag = 1; } es_fclose (fp); if (errflag) { while (list) { fingerprint_list_t tmp = list->next; xfree (list); list = tmp; } } xfree (fname); return list; /* Ready. */ } lnr++; if (!*line || line[strlen(line)-1] != '\n') { /* Eat until end of line. */ while ( (c=es_getc (fp)) != EOF && c != '\n') ; err = gpg_error (*line? GPG_ERR_LINE_TOO_LONG /* */: GPG_ERR_INCOMPLETE_LINE); log_error (_("%s:%u: read error: %s\n"), fname, lnr, gpg_strerror (err)); errflag = 1; continue; } /* Allow for empty lines and spaces */ for (p=line; spacep (p); p++) ; if (!*p || *p == '\n' || *p == '#') continue; item = xcalloc (1, sizeof *item); *list_tail = item; list_tail = &item->next; for (i=j=0; (p[i] == ':' || hexdigitp (p+i)) && j < 40; i++) if ( p[i] != ':' ) item->hexfpr[j++] = p[i] >= 'a'? (p[i] & 0xdf): p[i]; item->hexfpr[j] = 0; if (j != 40 || !(spacep (p+i) || p[i] == '\n')) { log_error (_("%s:%u: invalid fingerprint detected\n"), fname, lnr); errflag = 1; } i++; while (spacep (p+i)) i++; if (p[i] && p[i] != '\n') log_info (_("%s:%u: garbage at end of line ignored\n"), fname, lnr); } /*NOTREACHED*/ } /* Stuff used in daemon mode. */ /* Reread parts of the configuration. Note, that this function is obviously not thread-safe and should only be called from the NPTH signal handler. Fixme: Due to the way the argument parsing works, we create a memory leak here for all string type arguments. There is currently no clean way to tell whether the memory for the argument has been allocated or points into the process's original arguments. Unless we have a mechanism to tell this, we need to live on with this. */ static void reread_configuration (void) { gpgrt_argparse_t pargs; char *twopart; int dummy; + int logfile_seen = 0; if (!opt.config_filename) - return; /* No config file. */ + goto finish; /* No config file. */ twopart = strconcat (DIRMNGR_NAME EXTSEP_S "conf" PATHSEP_S, opt.config_filename, NULL); if (!twopart) return; /* Out of core. */ parse_rereadable_options (NULL, 1); /* Start from the default values. */ memset (&pargs, 0, sizeof pargs); dummy = 0; pargs.argc = &dummy; pargs.flags = (ARGPARSE_FLAG_KEEP |ARGPARSE_FLAG_SYS |ARGPARSE_FLAG_USER); while (gpgrt_argparser (&pargs, opts, twopart)) { if (pargs.r_opt == ARGPARSE_CONFFILE) { log_info (_("reading options from '%s'\n"), pargs.r_type? pargs.r.ret_str: "[cmdline]"); } else if (pargs.r_opt < -1) pargs.err = ARGPARSE_PRINT_WARNING; else /* Try to parse this option - ignore unchangeable ones. */ - parse_rereadable_options (&pargs, 1); + { + if (pargs.r_opt == oLogFile) + logfile_seen = 1; + parse_rereadable_options (&pargs, 1); + } } gpgrt_argparse (NULL, &pargs, NULL); /* Release internal state. */ xfree (twopart); post_option_parsing (); + + finish: + /* Get a default log file from common.conf. */ + if (!logfile_seen && !parse_comopt (GNUPG_MODULE_NAME_DIRMNGR, !!opt.debug)) + { + if (!current_logfile || !comopt.logfile + || strcmp (current_logfile, comopt.logfile)) + { + log_set_file (comopt.logfile); + xfree (current_logfile); + current_logfile = comopt.logfile? xtrystrdup (comopt.logfile) : NULL; + } + } } /* A global function which allows us to trigger the reload stuff from other places. */ void dirmngr_sighup_action (void) { log_info (_("SIGHUP received - " "re-reading configuration and flushing caches\n")); reread_configuration (); set_tor_mode (); cert_cache_deinit (0); crl_cache_deinit (); cert_cache_init (hkp_cacert_filenames); crl_cache_init (); reload_dns_stuff (0); ks_hkp_reload (); } /* This function is called if some network activity was done. At this * point we know the we have a network and we can decide whether to * run scheduled background tasks soon. The function should return * quickly and only trigger actions for another thread. */ static void netactivity_action (void) { network_activity_seen = 1; } /* The signal handler. */ #ifndef HAVE_W32_SYSTEM static void handle_signal (int signo) { switch (signo) { case SIGHUP: dirmngr_sighup_action (); break; case SIGUSR1: cert_cache_print_stats (); domaininfo_print_stats (); break; case SIGUSR2: log_info (_("SIGUSR2 received - no action defined\n")); break; case SIGTERM: if (!shutdown_pending) log_info (_("SIGTERM received - shutting down ...\n")); else log_info (_("SIGTERM received - still %d active connections\n"), active_connections); shutdown_pending++; if (shutdown_pending > 2) { log_info (_("shutdown forced\n")); log_info ("%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13)); cleanup (); dirmngr_exit (0); } break; case SIGINT: log_info (_("SIGINT received - immediate shutdown\n")); log_info( "%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13)); cleanup (); dirmngr_exit (0); break; default: log_info (_("signal %d received - no action defined\n"), signo); } } #endif /*!HAVE_W32_SYSTEM*/ /* Thread to do the housekeeping. */ static void * housekeeping_thread (void *arg) { static int sentinel; time_t curtime; struct server_control_s ctrlbuf; (void)arg; curtime = gnupg_get_time (); if (sentinel) { log_info ("housekeeping is already going on\n"); return NULL; } sentinel++; if (opt.verbose > 1) log_info ("starting housekeeping\n"); memset (&ctrlbuf, 0, sizeof ctrlbuf); dirmngr_init_default_ctrl (&ctrlbuf); dns_stuff_housekeeping (); ks_hkp_housekeeping (curtime); if (network_activity_seen) { network_activity_seen = 0; if (opt.allow_version_check) dirmngr_load_swdb (&ctrlbuf, 0); workqueue_run_global_tasks (&ctrlbuf, 1); } else workqueue_run_global_tasks (&ctrlbuf, 0); dirmngr_deinit_default_ctrl (&ctrlbuf); if (opt.verbose > 1) log_info ("ready with housekeeping\n"); sentinel--; return NULL; } /* We try to enable correct overflow handling for signed int (commonly * used for time_t). With gcc 4.2 -fno-strict-overflow was introduced * and used here as a pragma. Later gcc versions (gcc 6?) removed * this as a pragma and -fwrapv was then suggested as a replacement * for -fno-strict-overflow. */ #if GPGRT_HAVE_PRAGMA_GCC_PUSH # pragma GCC push_options # pragma GCC optimize ("wrapv") #endif static int time_for_housekeeping_p (time_t curtime) { static time_t last_housekeeping; if (!last_housekeeping) last_housekeeping = curtime; if (last_housekeeping + HOUSEKEEPING_INTERVAL <= curtime || last_housekeeping > curtime /*(be prepared for y2038)*/) { last_housekeeping = curtime; return 1; } return 0; } #if GPGRT_HAVE_PRAGMA_GCC_PUSH # pragma GCC pop_options #endif /* This is the worker for the ticker. It is called every few seconds and may only do fast operations. */ static void handle_tick (void) { struct stat statbuf; if (time_for_housekeeping_p (gnupg_get_time ())) { npth_t thread; npth_attr_t tattr; int err; err = npth_attr_init (&tattr); if (err) log_error ("error preparing housekeeping thread: %s\n", strerror (err)); else { npth_attr_setdetachstate (&tattr, NPTH_CREATE_DETACHED); err = npth_create (&thread, &tattr, housekeeping_thread, NULL); if (err) log_error ("error spawning housekeeping thread: %s\n", strerror (err)); npth_attr_destroy (&tattr); } } /* Check whether the homedir is still available. */ if (!shutdown_pending && gnupg_stat (gnupg_homedir (), &statbuf) && errno == ENOENT) { shutdown_pending = 1; log_info ("homedir has been removed - shutting down\n"); } } /* Check the nonce on a new connection. This is a NOP unless we are using our Unix domain socket emulation under Windows. */ static int check_nonce (assuan_fd_t fd, assuan_sock_nonce_t *nonce) { if (assuan_sock_check_nonce (fd, nonce)) { log_info (_("error reading nonce on fd %d: %s\n"), FD2INT (fd), strerror (errno)); assuan_sock_close (fd); return -1; } else return 0; } /* Helper to call a connection's main function. */ static void * start_connection_thread (void *arg) { static unsigned int last_session_id; unsigned int session_id; union int_and_ptr_u argval; gnupg_fd_t fd; memset (&argval, 0, sizeof argval); argval.aptr = arg; fd = argval.afd; if (check_nonce (fd, &socket_nonce)) { log_error ("handler nonce check FAILED\n"); return NULL; } #ifndef HAVE_W32_SYSTEM npth_setspecific (my_tlskey_current_fd, argval.aptr); #endif active_connections++; if (opt.verbose) log_info (_("handler for fd %d started\n"), FD2INT (fd)); session_id = ++last_session_id; if (!session_id) session_id = ++last_session_id; start_command_handler (fd, session_id); if (opt.verbose) log_info (_("handler for fd %d terminated\n"), FD2INT (fd)); active_connections--; workqueue_run_post_session_tasks (session_id); #ifndef HAVE_W32_SYSTEM argval.afd = ASSUAN_INVALID_FD; npth_setspecific (my_tlskey_current_fd, argval.aptr); #endif return NULL; } #ifdef HAVE_INOTIFY_INIT /* Read an inotify event and return true if it matches NAME. */ static int my_inotify_is_name (int fd, const char *name) { union { struct inotify_event ev; char _buf[sizeof (struct inotify_event) + 100 + 1]; } buf; int n; const char *s; s = strrchr (name, '/'); if (s && s[1]) name = s + 1; n = npth_read (fd, &buf, sizeof buf); if (n < sizeof (struct inotify_event)) return 0; if (buf.ev.len < strlen (name)+1) return 0; if (strcmp (buf.ev.name, name)) return 0; /* Not the desired file. */ return 1; /* Found. */ } #endif /*HAVE_INOTIFY_INIT*/ /* Main loop in daemon mode. Note that LISTEN_FD will be owned by * this function. */ static void handle_connections (assuan_fd_t listen_fd) { npth_attr_t tattr; #ifndef HAVE_W32_SYSTEM int signo; #endif struct sockaddr_un paddr; socklen_t plen = sizeof( paddr ); int nfd, ret; fd_set fdset, read_fdset; struct timespec abstime; struct timespec curtime; struct timespec timeout; int saved_errno; int my_inotify_fd = -1; npth_attr_init (&tattr); npth_attr_setdetachstate (&tattr, NPTH_CREATE_DETACHED); #ifndef HAVE_W32_SYSTEM /* FIXME */ npth_sigev_init (); npth_sigev_add (SIGHUP); npth_sigev_add (SIGUSR1); npth_sigev_add (SIGUSR2); npth_sigev_add (SIGINT); npth_sigev_add (SIGTERM); npth_sigev_fini (); #endif #ifdef HAVE_INOTIFY_INIT if (disable_check_own_socket) my_inotify_fd = -1; else if ((my_inotify_fd = inotify_init ()) == -1) log_info ("error enabling fast daemon termination: %s\n", strerror (errno)); else { /* We need to watch the directory for the file because there * won't be an IN_DELETE_SELF for a socket file. */ char *slash = strrchr (socket_name, '/'); log_assert (slash && slash[1]); *slash = 0; if (inotify_add_watch (my_inotify_fd, socket_name, IN_DELETE) == -1) { close (my_inotify_fd); my_inotify_fd = -1; } *slash = '/'; } #endif /*HAVE_INOTIFY_INIT*/ /* Setup the fdset. It has only one member. This is because we use pth_select instead of pth_accept to properly sync timeouts with to full second. */ FD_ZERO (&fdset); FD_SET (FD2INT (listen_fd), &fdset); nfd = FD2INT (listen_fd); if (my_inotify_fd != -1) { FD_SET (my_inotify_fd, &fdset); if (my_inotify_fd > nfd) nfd = my_inotify_fd; } npth_clock_gettime (&abstime); abstime.tv_sec += TIMERTICK_INTERVAL; /* Main loop. */ for (;;) { /* Shutdown test. */ if (shutdown_pending) { if (!active_connections) break; /* ready */ /* Do not accept new connections but keep on running the * loop to cope with the timer events. * * Note that we do not close the listening socket because a * client trying to connect to that socket would instead * restart a new dirmngr instance - which is unlikely the * intention of a shutdown. */ /* assuan_sock_close (listen_fd); */ /* listen_fd = -1; */ FD_ZERO (&fdset); nfd = -1; if (my_inotify_fd != -1) { FD_SET (my_inotify_fd, &fdset); nfd = my_inotify_fd; } } /* Take a copy of the fdset. */ read_fdset = fdset; npth_clock_gettime (&curtime); if (!(npth_timercmp (&curtime, &abstime, <))) { /* Timeout. When a shutdown is pending we use a shorter * interval to handle the shutdown more quickly. */ handle_tick (); npth_clock_gettime (&abstime); abstime.tv_sec += (shutdown_pending ? TIMERTICK_INTERVAL_SHUTDOWN : TIMERTICK_INTERVAL); } npth_timersub (&abstime, &curtime, &timeout); #ifndef HAVE_W32_SYSTEM ret = npth_pselect (nfd+1, &read_fdset, NULL, NULL, &timeout, npth_sigev_sigmask()); saved_errno = errno; while (npth_sigev_get_pending(&signo)) handle_signal (signo); #else ret = npth_eselect (nfd+1, &read_fdset, NULL, NULL, &timeout, NULL, NULL); saved_errno = errno; #endif if (ret == -1 && saved_errno != EINTR) { log_error (_("npth_pselect failed: %s - waiting 1s\n"), strerror (saved_errno)); npth_sleep (1); continue; } if (ret <= 0) { /* Interrupt or timeout. Will be handled when calculating the next timeout. */ continue; } if (shutdown_pending) { /* Do not anymore accept connections. */ continue; } #ifdef HAVE_INOTIFY_INIT if (my_inotify_fd != -1 && FD_ISSET (my_inotify_fd, &read_fdset) && my_inotify_is_name (my_inotify_fd, socket_name)) { shutdown_pending = 1; log_info ("socket file has been removed - shutting down\n"); } #endif /*HAVE_INOTIFY_INIT*/ if (FD_ISSET (FD2INT (listen_fd), &read_fdset)) { gnupg_fd_t fd; plen = sizeof paddr; fd = INT2FD (npth_accept (FD2INT(listen_fd), (struct sockaddr *)&paddr, &plen)); if (fd == GNUPG_INVALID_FD) { log_error ("accept failed: %s\n", strerror (errno)); } else { char threadname[50]; union int_and_ptr_u argval; npth_t thread; memset (&argval, 0, sizeof argval); argval.afd = fd; snprintf (threadname, sizeof threadname, "conn fd=%d", FD2INT(fd)); ret = npth_create (&thread, &tattr, start_connection_thread, argval.aptr); if (ret) { log_error ("error spawning connection handler: %s\n", strerror (ret) ); assuan_sock_close (fd); } npth_setname_np (thread, threadname); } } } #ifdef HAVE_INOTIFY_INIT if (my_inotify_fd != -1) close (my_inotify_fd); #endif /*HAVE_INOTIFY_INIT*/ npth_attr_destroy (&tattr); if (listen_fd != GNUPG_INVALID_FD) assuan_sock_close (listen_fd); cleanup (); log_info ("%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13)); } const char* dirmngr_get_current_socket_name (void) { if (socket_name) return socket_name; else return dirmngr_socket_name (); } /* Parse the revision part from the extended version blurb. */ static const char * get_revision_from_blurb (const char *blurb, int *r_len) { const char *s = blurb? blurb : ""; int n; for (; *s; s++) if (*s == '\n' && s[1] == '(') break; if (*s) { s += 2; for (n=0; s[n] && s[n] != ' '; n++) ; } else { s = "?"; n = 1; } *r_len = n; return s; } /* Print versions of dirmngr and used libraries. This is used by * "gpgconf --show-versions" so that there is no need to link gpgconf * against all these libraries. This is an internal API and should * not be relied upon. */ static void gpgconf_versions (void) { const char *s; int n; /* Unfortunately Npth has no way to get the version. */ s = get_revision_from_blurb (assuan_check_version ("\x01\x01"), &n); es_fprintf (es_stdout, "* Libassuan %s (%.*s)\n\n", assuan_check_version (NULL), n, s); s = get_revision_from_blurb (ksba_check_version ("\x01\x01"), &n); es_fprintf (es_stdout, "* KSBA %s (%.*s)\n\n", ksba_check_version (NULL), n, s); #ifdef HTTP_USE_NTBTLS s = get_revision_from_blurb (ntbtls_check_version ("\x01\x01"), &n); es_fprintf (es_stdout, "* NTBTLS %s (%.*s)\n\n", ntbtls_check_version (NULL), n, s); #elif HTTP_USE_GNUTLS es_fprintf (es_stdout, "* GNUTLS %s\n\n", gnutls_check_version (NULL)); #endif } diff --git a/kbx/keyboxd.c b/kbx/keyboxd.c index be9098c13..76a0694a4 100644 --- a/kbx/keyboxd.c +++ b/kbx/keyboxd.c @@ -1,1814 +1,1841 @@ /* keyboxd.c - The GnuPG Keybox Daemon * Copyright (C) 2000-2020 Free Software Foundation, Inc. * Copyright (C) 2000-2019 Werner Koch * Copyright (C) 2015-2020 g10 Code GmbH * * This file is part of GnuPG. * * GnuPG is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * GnuPG is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * SPDX-License-Identifier: GPL-3.0+ */ #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_W32_SYSTEM # ifndef WINVER # define WINVER 0x0500 /* Same as in common/sysutils.c */ # endif # include #else /*!HAVE_W32_SYSTEM*/ # include # include #endif /*!HAVE_W32_SYSTEM*/ #include #ifdef HAVE_SIGNAL_H # include #endif #include #define INCLUDED_BY_MAIN_MODULE 1 #define GNUPG_COMMON_NEED_AFLOCAL #include "keyboxd.h" #include /* Malloc hooks and socket wrappers. */ #include "../common/i18n.h" #include "../common/sysutils.h" #include "../common/asshelp.h" #include "../common/init.h" #include "../common/gc-opt-flags.h" #include "../common/exechelp.h" +#include "../common/comopt.h" #include "frontend.h" /* Urrgs: Put this into a separate header - but it needs assuan.h first. */ extern int kbxd_assuan_log_monitor (assuan_context_t ctx, unsigned int cat, const char *msg); enum cmd_and_opt_values { aNull = 0, oQuiet = 'q', oVerbose = 'v', oNoVerbose = 500, aGPGConfList, aGPGConfTest, oOptions, oDebug, oDebugAll, oDebugWait, oNoGreeting, oNoOptions, oHomedir, oNoDetach, oLogFile, oServer, oDaemon, oFakedSystemTime, oListenBacklog, oDisableCheckOwnSocket, oDummy }; static gpgrt_opt_t opts[] = { ARGPARSE_c (aGPGConfList, "gpgconf-list", "@"), ARGPARSE_c (aGPGConfTest, "gpgconf-test", "@"), ARGPARSE_header (NULL, N_("Options used for startup")), ARGPARSE_s_n (oDaemon, "daemon", N_("run in daemon mode (background)")), ARGPARSE_s_n (oServer, "server", N_("run in server mode (foreground)")), ARGPARSE_s_n (oNoDetach, "no-detach", N_("do not detach from the console")), ARGPARSE_s_s (oHomedir, "homedir", "@"), ARGPARSE_conffile (oOptions, "options", N_("|FILE|read options from FILE")), ARGPARSE_header ("Monitor", N_("Options controlling the diagnostic output")), ARGPARSE_s_n (oVerbose, "verbose", N_("verbose")), ARGPARSE_s_n (oQuiet, "quiet", N_("be somewhat more quiet")), ARGPARSE_s_s (oDebug, "debug", "@"), ARGPARSE_s_n (oDebugAll, "debug-all", "@"), ARGPARSE_s_i (oDebugWait, "debug-wait", "@"), ARGPARSE_s_s (oLogFile, "log-file", N_("use a log file for the server")), ARGPARSE_header ("Configuration", N_("Options controlling the configuration")), ARGPARSE_s_n (oDisableCheckOwnSocket, "disable-check-own-socket", "@"), ARGPARSE_s_s (oFakedSystemTime, "faked-system-time", "@"), ARGPARSE_s_i (oListenBacklog, "listen-backlog", "@"), ARGPARSE_end () /* End of list */ }; /* The list of supported debug flags. */ static struct debug_flags_s debug_flags [] = { { DBG_MPI_VALUE , "mpi" }, { DBG_CRYPTO_VALUE , "crypto" }, { DBG_MEMORY_VALUE , "memory" }, { DBG_CACHE_VALUE , "cache" }, { DBG_MEMSTAT_VALUE, "memstat" }, { DBG_HASHING_VALUE, "hashing" }, { DBG_IPC_VALUE , "ipc" }, { DBG_CLOCK_VALUE , "clock" }, { DBG_LOOKUP_VALUE , "lookup" }, { 77, NULL } /* 77 := Do not exit on "help" or "?". */ }; /* The timer tick used for housekeeping stuff. Note that on Windows * we use a SetWaitableTimer seems to signal earlier than about 2 * seconds. Thus we use 4 seconds on all platforms except for * Windowsce. CHECK_OWN_SOCKET_INTERVAL defines how often we check * our own socket in standard socket mode. If that value is 0 we * don't check at all. All values are in seconds. */ #if defined(HAVE_W32CE_SYSTEM) # define TIMERTICK_INTERVAL (60) # define CHECK_OWN_SOCKET_INTERVAL (0) /* Never */ #else # define TIMERTICK_INTERVAL (4) # define CHECK_OWN_SOCKET_INTERVAL (60) #endif /* The list of open file descriptors at startup. Note that this list * has been allocated using the standard malloc. */ #ifndef HAVE_W32_SYSTEM static int *startup_fd_list; #endif /* The signal mask at startup and a flag telling whether it is valid. */ #ifdef HAVE_SIGPROCMASK static sigset_t startup_signal_mask; static int startup_signal_mask_valid; #endif /* Flag to indicate that a shutdown was requested. */ static int shutdown_pending; /* Counter for the currently running own socket checks. */ static int check_own_socket_running; /* Flag to indicate that we shall not watch our own socket. */ static int disable_check_own_socket; /* Flag to inhibit socket removal in cleanup. */ static int inhibit_socket_removal; /* Name of the communication socket used for client requests. */ static char *socket_name; /* We need to keep track of the server's nonces (these are dummies for * POSIX systems). */ static assuan_sock_nonce_t socket_nonce; /* Value for the listen() backlog argument. We use the same value for * all sockets - 64 is on current Linux half of the default maximum. * Let's try this as default. Change at runtime with --listen-backlog. */ static int listen_backlog = 64; /* Name of a config file, which will be reread on a HUP if it is not NULL. */ static char *config_filename; /* Keep track of the current log file so that we can avoid updating * the log file after a SIGHUP if it didn't changed. Malloced. */ static char *current_logfile; /* This flag is true if the inotify mechanism for detecting the * removal of the homedir is active. This flag is used to disable the * alternative but portable stat based check. */ static int have_homedir_inotify; /* Depending on how keyboxd was started, the homedir inotify watch may * not be reliable. This flag is set if we assume that inotify works * reliable. */ static int reliable_homedir_inotify; /* Number of active connections. */ static int active_connections; /* This object is used to dispatch progress messages from Libgcrypt to * the right thread. Given that we will have at max only a few dozen * connections at a time, using a linked list is the easiest way to * handle this. */ struct progress_dispatch_s { struct progress_dispatch_s *next; /* The control object of the connection. If this is NULL no * connection is associated with this item and it is free for reuse * by new connections. */ ctrl_t ctrl; /* The thread id of (npth_self) of the connection. */ npth_t tid; /* The callback set by the connection. This is similar to the * Libgcrypt callback but with the control object passed as the * first argument. */ void (*cb)(ctrl_t ctrl, const char *what, int printchar, int current, int total); }; struct progress_dispatch_s *progress_dispatch_list; /* * Local prototypes. */ static char *create_socket_name (char *standard_name, int with_homedir); static gnupg_fd_t create_server_socket (char *name, int cygwin, assuan_sock_nonce_t *nonce); static void create_directories (void); static void kbxd_libgcrypt_progress_cb (void *data, const char *what, int printchar, int current, int total); static void kbxd_init_default_ctrl (ctrl_t ctrl); static void kbxd_deinit_default_ctrl (ctrl_t ctrl); static void handle_connections (gnupg_fd_t listen_fd); static void check_own_socket (void); static int check_for_running_kbxd (int silent); /* Pth wrapper function definitions. */ ASSUAN_SYSTEM_NPTH_IMPL; /* * Functions. */ /* Allocate a string describing a library version by calling a GETFNC. * This function is expected to be called only once. GETFNC is * expected to have a semantic like gcry_check_version (). */ static char * make_libversion (const char *libname, const char *(*getfnc)(const char*)) { return xstrconcat (libname, " ", getfnc (NULL), NULL); } /* Return strings describing this program. The case values are * described in Libgpg-error. The values here override the default * values given by strusage. */ static const char * my_strusage (int level) { static char *ver_gcry; const char *p; switch (level) { case 9: p = "GPL-3.0-or-later"; break; case 11: p = "keyboxd (@GNUPG@)"; break; case 13: p = VERSION; break; case 14: p = GNUPG_DEF_COPYRIGHT_LINE; break; case 17: p = PRINTABLE_OS_NAME; break; /* TRANSLATORS: @EMAIL@ will get replaced by the actual bug reporting address. This is so that we can change the reporting address without breaking the translations. */ case 19: p = _("Please report bugs to <@EMAIL@>.\n"); break; case 20: if (!ver_gcry) ver_gcry = make_libversion ("libgcrypt", gcry_check_version); p = ver_gcry; break; case 1: case 40: p = _("Usage: keyboxd [options] (-h for help)"); break; case 41: p = _("Syntax: keyboxd [options] [command [args]]\n" "Public key management for @GNUPG@\n"); break; default: p = NULL; } return p; } /* Setup the debugging. Note that we don't fail here, because it is * important to keep keyboxd running even after re-reading the options * due to a SIGHUP. */ static void set_debug (void) { if (opt.debug && !opt.verbose) opt.verbose = 1; if (opt.debug && opt.quiet) opt.quiet = 0; if (opt.debug & DBG_MPI_VALUE) gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 2); if (opt.debug & DBG_CRYPTO_VALUE ) gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 1); gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose); if (opt.debug) parse_debug_flag (NULL, &opt.debug, debug_flags); } /* Helper for cleanup to remove one socket with NAME. */ static void remove_socket (char *name) { if (name && *name) { gnupg_remove (name); *name = 0; } } /* Cleanup code for this program. This is either called has an atexit handler or directly. */ static void cleanup (void) { static int done; if (done) return; done = 1; if (!inhibit_socket_removal) remove_socket (socket_name); } /* Handle options which are allowed to be reset after program start. * Return true when the current option in PARGS could be handled and * false if not. As a special feature, passing a value of NULL for * PARGS, resets the options to the default. REREAD should be set * true if it is not the initial option parsing. */ static int parse_rereadable_options (gpgrt_argparse_t *pargs, int reread) { if (!pargs) { /* reset mode */ opt.quiet = 0; opt.verbose = 0; opt.debug = 0; disable_check_own_socket = 0; return 1; } switch (pargs->r_opt) { case oQuiet: opt.quiet = 1; break; case oVerbose: opt.verbose++; break; case oDebug: parse_debug_flag (pargs->r.ret_str, &opt.debug, debug_flags); break; case oDebugAll: opt.debug = ~0; break; case oLogFile: if (!reread) return 0; /* not handled */ if (!current_logfile || !pargs->r.ret_str || strcmp (current_logfile, pargs->r.ret_str)) { log_set_file (pargs->r.ret_str); xfree (current_logfile); current_logfile = xtrystrdup (pargs->r.ret_str); } break; case oDisableCheckOwnSocket: disable_check_own_socket = 1; break; default: return 0; /* not handled */ } return 1; /* handled */ } /* Fixup some options after all have been processed. */ static void finalize_rereadable_options (void) { } static void thread_init_once (void) { static int npth_initialized = 0; if (!npth_initialized) { npth_initialized++; npth_init (); } gpgrt_set_syscall_clamp (npth_unprotect, npth_protect); /* Now that we have set the syscall clamp we need to tell Libgcrypt * that it should get them from libgpg-error. Note that Libgcrypt * has already been initialized but at that point nPth was not * initialized and thus Libgcrypt could not set its system call * clamp. */ gcry_control (GCRYCTL_REINIT_SYSCALL_CLAMP, 0, 0); } static void initialize_modules (void) { thread_init_once (); assuan_set_system_hooks (ASSUAN_SYSTEM_NPTH); } /* The main entry point. */ int main (int argc, char **argv ) { gpgrt_argparse_t pargs; int orig_argc; char **orig_argv; char *last_configname = NULL; char *configname = NULL; int debug_argparser = 0; int pipe_server = 0; int is_daemon = 0; int nodetach = 0; char *logfile = NULL; int gpgconf_list = 0; int debug_wait = 0; struct assuan_malloc_hooks malloc_hooks; early_system_init (); /* Before we do anything else we save the list of currently open * file descriptors and the signal mask. This info is required to * do the exec call properly. We don't need it on Windows. */ #ifndef HAVE_W32_SYSTEM startup_fd_list = get_all_open_fds (); #endif /*!HAVE_W32_SYSTEM*/ #ifdef HAVE_SIGPROCMASK if (!sigprocmask (SIG_UNBLOCK, NULL, &startup_signal_mask)) startup_signal_mask_valid = 1; #endif /*HAVE_SIGPROCMASK*/ /* Set program name etc. */ gpgrt_set_strusage (my_strusage); log_set_prefix ("keyboxd", GPGRT_LOG_WITH_PREFIX|GPGRT_LOG_WITH_PID); /* Make sure that our subsystems are ready. */ i18n_init (); init_common_subsystems (&argc, &argv); gcry_control (GCRYCTL_DISABLE_SECMEM, 0); malloc_hooks.malloc = gcry_malloc; malloc_hooks.realloc = gcry_realloc; malloc_hooks.free = gcry_free; assuan_set_malloc_hooks (&malloc_hooks); assuan_set_gpg_err_source (GPG_ERR_SOURCE_DEFAULT); assuan_sock_init (); assuan_sock_set_system_hooks (ASSUAN_SYSTEM_NPTH); setup_libassuan_logging (&opt.debug, kbxd_assuan_log_monitor); setup_libgcrypt_logging (); gcry_set_progress_handler (kbxd_libgcrypt_progress_cb, NULL); /* Set default options. */ parse_rereadable_options (NULL, 0); /* Reset them to default values. */ /* Check whether we have a config file on the commandline */ orig_argc = argc; orig_argv = argv; pargs.argc = &argc; pargs.argv = &argv; pargs.flags= (ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); while (gpgrt_argparse (NULL, &pargs, opts)) { switch (pargs.r_opt) { case oDebug: case oDebugAll: debug_argparser++; break; case oHomedir: gnupg_set_homedir (pargs.r.ret_str); break; } } /* Reset the flags. */ pargs.flags &= ~(ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); /* The configuraton directories for use by gpgrt_argparser. */ gpgrt_set_confdir (GPGRT_CONFDIR_SYS, gnupg_sysconfdir ()); gpgrt_set_confdir (GPGRT_CONFDIR_USER, gnupg_homedir ()); argc = orig_argc; argv = orig_argv; pargs.argc = &argc; pargs.argv = &argv; pargs.flags |= (ARGPARSE_FLAG_RESET | ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_SYS | ARGPARSE_FLAG_USER); while (gpgrt_argparser (&pargs, opts, "keyboxd" EXTSEP_S "conf")) { if (pargs.r_opt == ARGPARSE_CONFFILE) { if (debug_argparser) log_info (_("reading options from '%s'\n"), pargs.r_type? pargs.r.ret_str: "[cmdline]"); if (pargs.r_type) { xfree (last_configname); last_configname = xstrdup (pargs.r.ret_str); configname = last_configname; } else configname = NULL; continue; } if (parse_rereadable_options (&pargs, 0)) continue; /* Already handled */ switch (pargs.r_opt) { case aGPGConfList: gpgconf_list = 1; break; case aGPGConfTest: gpgconf_list = 2; break; case oDebugWait: debug_wait = pargs.r.ret_int; break; case oNoGreeting: /* Dummy option. */ break; case oNoVerbose: opt.verbose = 0; break; case oNoOptions: break; /* no-options */ case oHomedir: gnupg_set_homedir (pargs.r.ret_str); break; case oNoDetach: nodetach = 1; break; case oLogFile: logfile = pargs.r.ret_str; break; case oServer: pipe_server = 1; break; case oDaemon: is_daemon = 1; break; case oFakedSystemTime: { time_t faked_time = isotime2epoch (pargs.r.ret_str); if (faked_time == (time_t)(-1)) faked_time = (time_t)strtoul (pargs.r.ret_str, NULL, 10); gnupg_set_time (faked_time, 0); } break; case oListenBacklog: listen_backlog = pargs.r.ret_int; break; default: if (configname) pargs.err = ARGPARSE_PRINT_WARNING; else pargs.err = ARGPARSE_PRINT_ERROR; break; } } gpgrt_argparse (NULL, &pargs, NULL); if (!last_configname) config_filename = gpgrt_fnameconcat (gnupg_homedir (), "keyboxd" EXTSEP_S "conf", NULL); else { config_filename = last_configname; last_configname = NULL; } if (log_get_errorcount(0)) exit (2); + /* Get a default log file from common.conf. */ + if (!logfile && !parse_comopt (GNUPG_MODULE_NAME_KEYBOXD, debug_argparser)) + { + logfile = comopt.logfile; + comopt.logfile = NULL; + } + + finalize_rereadable_options (); /* Print a warning if an argument looks like an option. */ if (!opt.quiet && !(pargs.flags & ARGPARSE_FLAG_STOP_SEEN)) { int i; for (i=0; i < argc; i++) if (argv[i][0] == '-' && argv[i][1] == '-') log_info (_("Note: '%s' is not considered an option\n"), argv[i]); } #ifdef ENABLE_NLS /* keyboxd usually does not output any messages because it runs in * the background. For log files it is acceptable to have messages * always encoded in utf-8. We switch here to utf-8, so that * commands like --help still give native messages. It is far * easier to switch only once instead of for every message and it * actually helps when more then one thread is active (avoids an * extra copy step). */ bind_textdomain_codeset (PACKAGE_GT, "UTF-8"); #endif if (!pipe_server && !is_daemon && !gpgconf_list) { /* We have been called without any command and thus we merely * check whether an instance of us is already running. We do * this right here so that we don't clobber a logfile with this * check but print the status directly to stderr. */ opt.debug = 0; set_debug (); check_for_running_kbxd (0); kbxd_exit (0); } set_debug (); if (atexit (cleanup)) { log_error ("atexit failed\n"); cleanup (); exit (1); } /* Try to create missing directories. */ create_directories (); if (debug_wait && pipe_server) { thread_init_once (); log_debug ("waiting for debugger - my pid is %u .....\n", (unsigned int)getpid()); gnupg_sleep (debug_wait); log_debug ("... okay\n"); } if (gpgconf_list == 2) kbxd_exit (0); else if (gpgconf_list) { kbxd_exit (0); } /* Now start with logging to a file if this is desired. */ if (logfile) { log_set_file (logfile); log_set_prefix (NULL, (GPGRT_LOG_WITH_PREFIX | GPGRT_LOG_WITH_TIME | GPGRT_LOG_WITH_PID)); current_logfile = xstrdup (logfile); } if (pipe_server) { /* This is the simple pipe based server */ ctrl_t ctrl; initialize_modules (); ctrl = xtrycalloc (1, sizeof *ctrl); if (!ctrl) { log_error ("error allocating connection control data: %s\n", strerror (errno) ); kbxd_exit (1); } kbxd_init_default_ctrl (ctrl); /* kbxd_set_database (ctrl, "pubring.kbx", 0); */ kbxd_set_database (ctrl, "pubring.db", 0); kbxd_start_command_handler (ctrl, GNUPG_INVALID_FD, 0); kbxd_deinit_default_ctrl (ctrl); xfree (ctrl); } else if (!is_daemon) ; /* NOTREACHED */ else { /* Regular daemon mode. */ gnupg_fd_t fd; #ifndef HAVE_W32_SYSTEM pid_t pid; #endif /* Create the sockets. */ socket_name = create_socket_name (KEYBOXD_SOCK_NAME, 1); fd = create_server_socket (socket_name, 0, &socket_nonce); fflush (NULL); #ifdef HAVE_W32_SYSTEM (void)nodetach; initialize_modules (); #else /*!HAVE_W32_SYSTEM*/ pid = fork (); if (pid == (pid_t)-1) { log_fatal ("fork failed: %s\n", strerror (errno) ); exit (1); } else if (pid) { /* We are the parent */ /* Close the socket FD. */ close (fd); /* The signal mask might not be correct right now and thus * we restore it. That is not strictly necessary but some * programs falsely assume a cleared signal mask. */ #ifdef HAVE_SIGPROCMASK if (startup_signal_mask_valid) { if (sigprocmask (SIG_SETMASK, &startup_signal_mask, NULL)) log_error ("error restoring signal mask: %s\n", strerror (errno)); } else log_info ("no saved signal mask\n"); #endif /*HAVE_SIGPROCMASK*/ *socket_name = 0; /* Don't let cleanup() remove the socket - the child should do this from now on */ exit (0); /*NOTREACHED*/ } /* End parent */ /* * This is the child */ initialize_modules (); /* Detach from tty and put process into a new session */ if (!nodetach) { int i; unsigned int oldflags; /* Close stdin, stdout and stderr unless it is the log stream */ for (i=0; i <= 2; i++) { if (!log_test_fd (i) && i != fd ) { if ( ! close (i) && open ("/dev/null", i? O_WRONLY : O_RDONLY) == -1) { log_error ("failed to open '%s': %s\n", "/dev/null", strerror (errno)); cleanup (); exit (1); } } } if (setsid() == -1) { log_error ("setsid() failed: %s\n", strerror(errno) ); cleanup (); exit (1); } log_get_prefix (&oldflags); log_set_prefix (NULL, oldflags | GPGRT_LOG_RUN_DETACHED); opt.running_detached = 1; /* Because we don't support running a program on the command * line we can assume that the inotify things works and thus * we can avoid the regular stat calls. */ reliable_homedir_inotify = 1; } { struct sigaction sa; sa.sa_handler = SIG_IGN; sigemptyset (&sa.sa_mask); sa.sa_flags = 0; sigaction (SIGPIPE, &sa, NULL); } #endif /*!HAVE_W32_SYSTEM*/ if (gnupg_chdir (gnupg_daemon_rootdir ())) { log_error ("chdir to '%s' failed: %s\n", gnupg_daemon_rootdir (), strerror (errno)); exit (1); } { ctrl_t ctrl; ctrl = xtrycalloc (1, sizeof *ctrl); if (!ctrl) { log_error ("error allocating connection control data: %s\n", strerror (errno) ); kbxd_exit (1); } kbxd_init_default_ctrl (ctrl); /* kbxd_set_database (ctrl, "pubring.kbx", 0); */ kbxd_set_database (ctrl, "pubring.db", 0); kbxd_deinit_default_ctrl (ctrl); xfree (ctrl); } log_info ("%s %s started\n", gpgrt_strusage(11), gpgrt_strusage(13)); handle_connections (fd); assuan_sock_close (fd); } return 0; } /* Exit entry point. This function should be called instead of a plain exit. */ void kbxd_exit (int rc) { /* As usual we run our cleanup handler. */ cleanup (); /* at this time a bit annoying */ if ((opt.debug & DBG_MEMSTAT_VALUE)) gcry_control (GCRYCTL_DUMP_MEMORY_STATS ); rc = rc? rc : log_get_errorcount(0)? 2 : 0; exit (rc); } /* This is our callback function for gcrypt progress messages. It is * set once at startup and dispatches progress messages to the * corresponding threads of ours. */ static void kbxd_libgcrypt_progress_cb (void *data, const char *what, int printchar, int current, int total) { struct progress_dispatch_s *dispatch; npth_t mytid = npth_self (); (void)data; for (dispatch = progress_dispatch_list; dispatch; dispatch = dispatch->next) if (dispatch->ctrl && dispatch->tid == mytid) break; if (dispatch && dispatch->cb) dispatch->cb (dispatch->ctrl, what, printchar, current, total); } /* If a progress dispatcher callback has been associated with the * current connection unregister it. */ static void unregister_progress_cb (void) { struct progress_dispatch_s *dispatch; npth_t mytid = npth_self (); for (dispatch = progress_dispatch_list; dispatch; dispatch = dispatch->next) if (dispatch->ctrl && dispatch->tid == mytid) break; if (dispatch) { dispatch->ctrl = NULL; dispatch->cb = NULL; } } /* Setup a progress callback CB for the current connection. Using a * CB of NULL disables the callback. */ void kbxd_set_progress_cb (void (*cb)(ctrl_t ctrl, const char *what, int printchar, int current, int total), ctrl_t ctrl) { struct progress_dispatch_s *dispatch, *firstfree; npth_t mytid = npth_self (); firstfree = NULL; for (dispatch = progress_dispatch_list; dispatch; dispatch = dispatch->next) { if (dispatch->ctrl && dispatch->tid == mytid) break; if (!dispatch->ctrl && !firstfree) firstfree = dispatch; } if (!dispatch) /* None allocated: Reuse or allocate a new one. */ { if (firstfree) { dispatch = firstfree; } else if ((dispatch = xtrycalloc (1, sizeof *dispatch))) { dispatch->next = progress_dispatch_list; progress_dispatch_list = dispatch; } else { log_error ("error allocating new progress dispatcher slot: %s\n", gpg_strerror (gpg_error_from_syserror ())); return; } dispatch->ctrl = ctrl; dispatch->tid = mytid; } dispatch->cb = cb; } /* Each thread has its own local variables conveyed by a control * structure usually identified by an argument named CTRL. This * function is called immediately after allocating the control * structure. Its purpose is to setup the default values for that * structure. Note that some values may have already been set. */ static void kbxd_init_default_ctrl (ctrl_t ctrl) { ctrl->magic = SERVER_CONTROL_MAGIC; } /* Release all resources allocated by default in the control structure. This is the counterpart to kbxd_init_default_ctrl. */ static void kbxd_deinit_default_ctrl (ctrl_t ctrl) { if (!ctrl) return; kbxd_release_session_info (ctrl); ctrl->magic = 0xdeadbeef; unregister_progress_cb (); xfree (ctrl->lc_messages); } /* Reread parts of the configuration. Note, that this function is * obviously not thread-safe and should only be called from the PTH * signal handler. * * Fixme: Due to the way the argument parsing works, we create a * memory leak here for all string type arguments. There is currently * no clean way to tell whether the memory for the argument has been * allocated or points into the process's original arguments. Unless * we have a mechanism to tell this, we need to live on with this. */ static void reread_configuration (void) { gpgrt_argparse_t pargs; char *twopart; int dummy; + int logfile_seen = 0; if (!config_filename) - return; /* No config file. */ + goto finish; /* No config file. */ twopart = strconcat ("keyboxd" EXTSEP_S "conf" PATHSEP_S, config_filename, NULL); if (!twopart) return; /* Out of core. */ parse_rereadable_options (NULL, 1); /* Start from the default values. */ memset (&pargs, 0, sizeof pargs); dummy = 0; pargs.argc = &dummy; pargs.flags = (ARGPARSE_FLAG_KEEP |ARGPARSE_FLAG_SYS |ARGPARSE_FLAG_USER); while (gpgrt_argparser (&pargs, opts, twopart)) { if (pargs.r_opt == ARGPARSE_CONFFILE) { log_info (_("reading options from '%s'\n"), pargs.r_type? pargs.r.ret_str: "[cmdline]"); } else if (pargs.r_opt < -1) pargs.err = ARGPARSE_PRINT_WARNING; else /* Try to parse this option - ignore unchangeable ones. */ - parse_rereadable_options (&pargs, 1); + { + if (pargs.r_opt == oLogFile) + logfile_seen = 1; + parse_rereadable_options (&pargs, 1); + } } gpgrt_argparse (NULL, &pargs, NULL); /* Release internal state. */ xfree (twopart); finalize_rereadable_options (); set_debug (); + + finish: + /* Get a default log file from common.conf. */ + if (!logfile_seen && !parse_comopt (GNUPG_MODULE_NAME_KEYBOXD, !!opt.debug)) + { + if (!current_logfile || !comopt.logfile + || strcmp (current_logfile, comopt.logfile)) + { + log_set_file (comopt.logfile); + xfree (current_logfile); + current_logfile = comopt.logfile? xtrystrdup (comopt.logfile) : NULL; + } + } } /* Return the file name of the socket we are using for requests. */ const char * get_kbxd_socket_name (void) { const char *s = socket_name; return (s && *s)? s : NULL; } /* Return the number of active connections. */ int get_kbxd_active_connection_count (void) { return active_connections; } /* Create a name for the socket in the home directory as using * STANDARD_NAME. We also check for valid characters as well as * against a maximum allowed length for a Unix domain socket is done. * The function terminates the process in case of an error. The * function returns a pointer to an allocated string with the absolute * name of the socket used. */ static char * create_socket_name (char *standard_name, int with_homedir) { char *name; if (with_homedir) name = make_filename (gnupg_socketdir (), standard_name, NULL); else name = make_filename (standard_name, NULL); if (strchr (name, PATHSEP_C)) { log_error (("'%s' are not allowed in the socket name\n"), PATHSEP_S); kbxd_exit (2); } return name; } /* Create a Unix domain socket with NAME. Returns the file descriptor * or terminates the process in case of an error. If CYGWIN is set a * Cygwin compatible socket is created (Windows only). */ static gnupg_fd_t create_server_socket (char *name, int cygwin, assuan_sock_nonce_t *nonce) { struct sockaddr *addr; struct sockaddr_un *unaddr; socklen_t len; gnupg_fd_t fd; int rc; fd = assuan_sock_new (AF_UNIX, SOCK_STREAM, 0); if (fd == ASSUAN_INVALID_FD) { log_error (_("can't create socket: %s\n"), strerror (errno)); *name = 0; /* Inhibit removal of the socket by cleanup(). */ kbxd_exit (2); } if (cygwin) assuan_sock_set_flag (fd, "cygwin", 1); unaddr = xmalloc (sizeof *unaddr); addr = (struct sockaddr*)unaddr; if (assuan_sock_set_sockaddr_un (name, addr, NULL)) { if (errno == ENAMETOOLONG) log_error (_("socket name '%s' is too long\n"), name); else log_error ("error preparing socket '%s': %s\n", name, gpg_strerror (gpg_error_from_syserror ())); *name = 0; /* Inhibit removal of the socket by cleanup(). */ xfree (unaddr); kbxd_exit (2); } len = SUN_LEN (unaddr); rc = assuan_sock_bind (fd, addr, len); /* Our error code mapping on W32CE returns EEXIST thus we also test for this. */ if (rc == -1 && (errno == EADDRINUSE #ifdef HAVE_W32_SYSTEM || errno == EEXIST #endif )) { /* Check whether a keyboxd is already running. */ if (!check_for_running_kbxd (1)) { log_set_prefix (NULL, GPGRT_LOG_WITH_PREFIX); log_set_file (NULL); log_error (_("a keyboxd is already running - " "not starting a new one\n")); *name = 0; /* Inhibit removal of the socket by cleanup(). */ assuan_sock_close (fd); xfree (unaddr); kbxd_exit (2); } gnupg_remove (unaddr->sun_path); rc = assuan_sock_bind (fd, addr, len); } if (rc != -1 && (rc=assuan_sock_get_nonce (addr, len, nonce))) log_error (_("error getting nonce for the socket\n")); if (rc == -1) { /* We use gpg_strerror here because it allows us to get strings for some W32 socket error codes. */ log_error (_("error binding socket to '%s': %s\n"), unaddr->sun_path, gpg_strerror (gpg_error_from_syserror ())); assuan_sock_close (fd); *name = 0; /* Inhibit removal of the socket by cleanup(). */ xfree (unaddr); kbxd_exit (2); } if (gnupg_chmod (unaddr->sun_path, "-rwx")) log_error (_("can't set permissions of '%s': %s\n"), unaddr->sun_path, strerror (errno)); if (listen (FD2INT(fd), listen_backlog ) == -1) { log_error ("listen(fd,%d) failed: %s\n", listen_backlog, strerror (errno)); *name = 0; /* Inhibit removal of the socket by cleanup(). */ assuan_sock_close (fd); xfree (unaddr); kbxd_exit (2); } if (opt.verbose) log_info (_("listening on socket '%s'\n"), unaddr->sun_path); xfree (unaddr); return fd; } /* Check that the directory for storing the public keys exists and * create it if not. This function won't fail as it is only a * convenience function and not strictly necessary. */ static void create_public_keys_directory (const char *home) { char *fname; struct stat statbuf; fname = make_filename (home, GNUPG_PUBLIC_KEYS_DIR, NULL); if (gnupg_stat (fname, &statbuf) && errno == ENOENT) { if (gnupg_mkdir (fname, "-rwxr-x")) log_error (_("can't create directory '%s': %s\n"), fname, strerror (errno) ); else if (!opt.quiet) log_info (_("directory '%s' created\n"), fname); } if (gnupg_chmod (fname, "-rwxr-x")) log_error (_("can't set permissions of '%s': %s\n"), fname, strerror (errno)); xfree (fname); } /* Create the directory only if the supplied directory name is the * same as the default one. This way we avoid to create arbitrary * directories when a non-default home directory is used. To cope * with HOME, we compare only the suffix if we see that the default * homedir does start with a tilde. We don't stop here in case of * problems because other functions will throw an error anyway.*/ static void create_directories (void) { struct stat statbuf; const char *defhome = standard_homedir (); char *home; home = make_filename (gnupg_homedir (), NULL); if (gnupg_stat (home, &statbuf)) { if (errno == ENOENT) { if ( #ifdef HAVE_W32_SYSTEM ( !compare_filenames (home, defhome) ) #else (*defhome == '~' && (strlen (home) >= strlen (defhome+1) && !strcmp (home + strlen(home) - strlen (defhome+1), defhome+1))) || (*defhome != '~' && !strcmp (home, defhome) ) #endif ) { if (gnupg_mkdir (home, "-rwx")) log_error (_("can't create directory '%s': %s\n"), home, strerror (errno) ); else { if (!opt.quiet) log_info (_("directory '%s' created\n"), home); } } } else log_error (_("stat() failed for '%s': %s\n"), home, strerror (errno)); } else if ( !S_ISDIR(statbuf.st_mode)) { log_error (_("can't use '%s' as home directory\n"), home); } else /* exists and is a directory. */ { create_public_keys_directory (home); } xfree (home); } /* This is the worker for the ticker. It is called every few seconds * and may only do fast operations. */ static void handle_tick (void) { static time_t last_minute; struct stat statbuf; if (!last_minute) last_minute = time (NULL); /* Code to be run from time to time. */ #if CHECK_OWN_SOCKET_INTERVAL > 0 if (last_minute + CHECK_OWN_SOCKET_INTERVAL <= time (NULL)) { check_own_socket (); last_minute = time (NULL); } #endif /* Check whether the homedir is still available. */ if (!shutdown_pending && (!have_homedir_inotify || !reliable_homedir_inotify) && gnupg_stat (gnupg_homedir (), &statbuf) && errno == ENOENT) { shutdown_pending = 1; log_info ("homedir has been removed - shutting down\n"); } } /* A global function which allows us to call the reload stuff from * other places too. This is only used when build for W32. */ void kbxd_sighup_action (void) { log_info ("SIGHUP received - " "re-reading configuration and flushing cache\n"); reread_configuration (); } /* A helper function to handle SIGUSR2. */ static void kbxd_sigusr2_action (void) { if (opt.verbose) log_info ("SIGUSR2 received - no action\n"); /* Nothing to do right now. */ } #ifndef HAVE_W32_SYSTEM /* The signal handler for this program. It is expected to be run in * its own thread and not in the context of a signal handler. */ static void handle_signal (int signo) { switch (signo) { case SIGHUP: kbxd_sighup_action (); break; case SIGUSR1: log_info ("SIGUSR1 received - printing internal information:\n"); /* Fixme: We need to see how to integrate pth dumping into our logging system. */ /* pth_ctrl (PTH_CTRL_DUMPSTATE, log_get_stream ()); */ break; case SIGUSR2: kbxd_sigusr2_action (); break; case SIGTERM: if (!shutdown_pending) log_info ("SIGTERM received - shutting down ...\n"); else log_info ("SIGTERM received - still %i open connections\n", active_connections); shutdown_pending++; if (shutdown_pending > 2) { log_info ("shutdown forced\n"); log_info ("%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13) ); cleanup (); kbxd_exit (0); } break; case SIGINT: log_info ("SIGINT received - immediate shutdown\n"); log_info( "%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13)); cleanup (); kbxd_exit (0); break; default: log_info ("signal %d received - no action defined\n", signo); } } #endif /* Check the nonce on a new connection. This is a NOP unless we are using our Unix domain socket emulation under Windows. */ static int check_nonce (ctrl_t ctrl, assuan_sock_nonce_t *nonce) { if (assuan_sock_check_nonce (ctrl->thread_startup.fd, nonce)) { log_info (_("error reading nonce on fd %d: %s\n"), FD2INT(ctrl->thread_startup.fd), strerror (errno)); assuan_sock_close (ctrl->thread_startup.fd); xfree (ctrl); return -1; } else return 0; } static void * do_start_connection_thread (ctrl_t ctrl) { static unsigned int last_session_id; unsigned int session_id; active_connections++; kbxd_init_default_ctrl (ctrl); if (opt.verbose && !DBG_IPC) log_info (_("handler 0x%lx for fd %d started\n"), (unsigned long) npth_self(), FD2INT(ctrl->thread_startup.fd)); session_id = ++last_session_id; if (!session_id) session_id = ++last_session_id; kbxd_start_command_handler (ctrl, ctrl->thread_startup.fd, session_id); if (opt.verbose && !DBG_IPC) log_info (_("handler 0x%lx for fd %d terminated\n"), (unsigned long) npth_self(), FD2INT(ctrl->thread_startup.fd)); kbxd_deinit_default_ctrl (ctrl); xfree (ctrl); active_connections--; return NULL; } /* This is the standard connection thread's main function. */ static void * start_connection_thread (void *arg) { ctrl_t ctrl = arg; if (check_nonce (ctrl, &socket_nonce)) { log_error ("handler 0x%lx nonce check FAILED\n", (unsigned long) npth_self()); return NULL; } return do_start_connection_thread (ctrl); } /* Connection handler loop. Wait for connection requests and spawn a * thread after accepting a connection. */ static void handle_connections (gnupg_fd_t listen_fd) { gpg_error_t err; npth_attr_t tattr; struct sockaddr_un paddr; socklen_t plen; fd_set fdset, read_fdset; int ret; gnupg_fd_t fd; int nfd; int saved_errno; struct timespec abstime; struct timespec curtime; struct timespec timeout; #ifdef HAVE_W32_SYSTEM HANDLE events[2]; unsigned int events_set; #endif int sock_inotify_fd = -1; int home_inotify_fd = -1; struct { const char *name; void *(*func) (void *arg); gnupg_fd_t l_fd; } listentbl[] = { { "std", start_connection_thread }, }; ret = npth_attr_init(&tattr); if (ret) log_fatal ("error allocating thread attributes: %s\n", strerror (ret)); npth_attr_setdetachstate (&tattr, NPTH_CREATE_DETACHED); #ifndef HAVE_W32_SYSTEM npth_sigev_init (); npth_sigev_add (SIGHUP); npth_sigev_add (SIGUSR1); npth_sigev_add (SIGUSR2); npth_sigev_add (SIGINT); npth_sigev_add (SIGTERM); npth_sigev_fini (); #else # ifdef HAVE_W32CE_SYSTEM /* Use a dummy event. */ sigs = 0; ev = pth_event (PTH_EVENT_SIGS, &sigs, &signo); # else events[0] = INVALID_HANDLE_VALUE; # endif #endif if (disable_check_own_socket) sock_inotify_fd = -1; else if ((err = gnupg_inotify_watch_socket (&sock_inotify_fd, socket_name))) { if (gpg_err_code (err) != GPG_ERR_NOT_SUPPORTED) log_info ("error enabling daemon termination by socket removal: %s\n", gpg_strerror (err)); } if (disable_check_own_socket) home_inotify_fd = -1; else if ((err = gnupg_inotify_watch_delete_self (&home_inotify_fd, gnupg_homedir ()))) { if (gpg_err_code (err) != GPG_ERR_NOT_SUPPORTED) log_info ("error enabling daemon termination by homedir removal: %s\n", gpg_strerror (err)); } else have_homedir_inotify = 1; FD_ZERO (&fdset); FD_SET (FD2INT (listen_fd), &fdset); nfd = FD2INT (listen_fd); if (sock_inotify_fd != -1) { FD_SET (sock_inotify_fd, &fdset); if (sock_inotify_fd > nfd) nfd = sock_inotify_fd; } if (home_inotify_fd != -1) { FD_SET (home_inotify_fd, &fdset); if (home_inotify_fd > nfd) nfd = home_inotify_fd; } listentbl[0].l_fd = listen_fd; npth_clock_gettime (&abstime); abstime.tv_sec += TIMERTICK_INTERVAL; for (;;) { /* Shutdown test. */ if (shutdown_pending) { if (!active_connections) break; /* ready */ /* Do not accept new connections but keep on running the * loop to cope with the timer events. * * Note that we do not close the listening socket because a * client trying to connect to that socket would instead * restart a new keyboxd instance - which is unlikely the * intention of a shutdown. */ FD_ZERO (&fdset); nfd = -1; if (sock_inotify_fd != -1) { FD_SET (sock_inotify_fd, &fdset); nfd = sock_inotify_fd; } if (home_inotify_fd != -1) { FD_SET (home_inotify_fd, &fdset); if (home_inotify_fd > nfd) nfd = home_inotify_fd; } } read_fdset = fdset; npth_clock_gettime (&curtime); if (!(npth_timercmp (&curtime, &abstime, <))) { /* Timeout. */ handle_tick (); npth_clock_gettime (&abstime); abstime.tv_sec += TIMERTICK_INTERVAL; } npth_timersub (&abstime, &curtime, &timeout); #ifndef HAVE_W32_SYSTEM ret = npth_pselect (nfd+1, &read_fdset, NULL, NULL, &timeout, npth_sigev_sigmask ()); saved_errno = errno; { int signo; while (npth_sigev_get_pending (&signo)) handle_signal (signo); } #else ret = npth_eselect (nfd+1, &read_fdset, NULL, NULL, &timeout, events, &events_set); saved_errno = errno; /* This is valid even if npth_eselect returns an error. */ if ((events_set & 1)) kbxd_sigusr2_action (); #endif if (ret == -1 && saved_errno != EINTR) { log_error (_("npth_pselect failed: %s - waiting 1s\n"), strerror (saved_errno)); npth_sleep (1); continue; } if (ret <= 0) { /* Interrupt or timeout. Will be handled when calculating the * next timeout. */ continue; } /* The inotify fds are set even when a shutdown is pending (see * above). So we must handle them in any case. To avoid that * they trigger a second time we close them immediately. */ if (sock_inotify_fd != -1 && FD_ISSET (sock_inotify_fd, &read_fdset) && gnupg_inotify_has_name (sock_inotify_fd, KEYBOXD_SOCK_NAME)) { shutdown_pending = 1; close (sock_inotify_fd); sock_inotify_fd = -1; log_info ("socket file has been removed - shutting down\n"); } if (home_inotify_fd != -1 && FD_ISSET (home_inotify_fd, &read_fdset)) { shutdown_pending = 1; close (home_inotify_fd); home_inotify_fd = -1; log_info ("homedir has been removed - shutting down\n"); } if (!shutdown_pending) { int idx; ctrl_t ctrl; npth_t thread; for (idx=0; idx < DIM(listentbl); idx++) { if (listentbl[idx].l_fd == GNUPG_INVALID_FD) continue; if (!FD_ISSET (FD2INT (listentbl[idx].l_fd), &read_fdset)) continue; plen = sizeof paddr; fd = INT2FD (npth_accept (FD2INT(listentbl[idx].l_fd), (struct sockaddr *)&paddr, &plen)); if (fd == GNUPG_INVALID_FD) { log_error ("accept failed for %s: %s\n", listentbl[idx].name, strerror (errno)); } else if ( !(ctrl = xtrycalloc (1, sizeof *ctrl))) { log_error ("error allocating connection data for %s: %s\n", listentbl[idx].name, strerror (errno) ); assuan_sock_close (fd); } else { ctrl->thread_startup.fd = fd; ret = npth_create (&thread, &tattr, listentbl[idx].func, ctrl); if (ret) { log_error ("error spawning connection handler for %s:" " %s\n", listentbl[idx].name, strerror (ret)); assuan_sock_close (fd); xfree (ctrl); } } } } } if (sock_inotify_fd != -1) close (sock_inotify_fd); if (home_inotify_fd != -1) close (home_inotify_fd); cleanup (); log_info (_("%s %s stopped\n"), gpgrt_strusage(11), gpgrt_strusage(13)); npth_attr_destroy (&tattr); } /* Helper for check_own_socket. */ static gpg_error_t check_own_socket_pid_cb (void *opaque, const void *buffer, size_t length) { membuf_t *mb = opaque; put_membuf (mb, buffer, length); return 0; } /* The thread running the actual check. We need to run this in a * separate thread so that check_own_thread can be called from the * timer tick. */ static void * check_own_socket_thread (void *arg) { int rc; char *sockname = arg; assuan_context_t ctx = NULL; membuf_t mb; char *buffer; check_own_socket_running++; rc = assuan_new (&ctx); if (rc) { log_error ("can't allocate assuan context: %s\n", gpg_strerror (rc)); goto leave; } assuan_set_flag (ctx, ASSUAN_NO_LOGGING, 1); rc = assuan_socket_connect (ctx, sockname, (pid_t)(-1), 0); if (rc) { log_error ("can't connect my own socket: %s\n", gpg_strerror (rc)); goto leave; } init_membuf (&mb, 100); rc = assuan_transact (ctx, "GETINFO pid", check_own_socket_pid_cb, &mb, NULL, NULL, NULL, NULL); put_membuf (&mb, "", 1); buffer = get_membuf (&mb, NULL); if (rc || !buffer) { log_error ("sending command \"%s\" to my own socket failed: %s\n", "GETINFO pid", gpg_strerror (rc)); rc = 1; } else if ( (pid_t)strtoul (buffer, NULL, 10) != getpid ()) { log_error ("socket is now serviced by another server\n"); rc = 1; } else if (opt.verbose > 1) log_error ("socket is still served by this server\n"); xfree (buffer); leave: xfree (sockname); if (ctx) assuan_release (ctx); if (rc) { /* We may not remove the socket as it is now in use by another * server. */ inhibit_socket_removal = 1; shutdown_pending = 2; log_info ("this process is useless - shutting down\n"); } check_own_socket_running--; return NULL; } /* Check whether we are still listening on our own socket. In case * another keyboxd process started after us has taken ownership of our * socket, we would linger around without any real task. Thus we * better check once in a while whether we are really needed. */ static void check_own_socket (void) { char *sockname; npth_t thread; npth_attr_t tattr; int err; if (disable_check_own_socket) return; if (check_own_socket_running || shutdown_pending) return; /* Still running or already shutting down. */ sockname = make_filename_try (gnupg_socketdir (), KEYBOXD_SOCK_NAME, NULL); if (!sockname) return; /* Out of memory. */ err = npth_attr_init (&tattr); if (err) return; npth_attr_setdetachstate (&tattr, NPTH_CREATE_DETACHED); err = npth_create (&thread, &tattr, check_own_socket_thread, sockname); if (err) log_error ("error spawning check_own_socket_thread: %s\n", strerror (err)); npth_attr_destroy (&tattr); } /* Figure out whether a keyboxd is available and running. Prints an * error if not. If SILENT is true, no messages are printed. Returns * 0 if the agent is running. */ static int check_for_running_kbxd (int silent) { gpg_error_t err; char *sockname; assuan_context_t ctx = NULL; sockname = make_filename_try (gnupg_socketdir (), KEYBOXD_SOCK_NAME, NULL); if (!sockname) return gpg_error_from_syserror (); err = assuan_new (&ctx); if (!err) err = assuan_socket_connect (ctx, sockname, (pid_t)(-1), 0); xfree (sockname); if (err) { if (!silent) log_error (_("no keyboxd running in this session\n")); if (ctx) assuan_release (ctx); return -1; } if (!opt.quiet && !silent) log_info ("keyboxd running and available\n"); assuan_release (ctx); return 0; } diff --git a/scd/scdaemon.c b/scd/scdaemon.c index eddc83256..60d68c26a 100644 --- a/scd/scdaemon.c +++ b/scd/scdaemon.c @@ -1,1436 +1,1448 @@ /* scdaemon.c - The GnuPG Smartcard Daemon * Copyright (C) 2001-2002, 2004-2005, 2007-2020 Free Software Foundation, Inc. * Copyright (C) 2001-2002, 2004-2005, 2007-2019 Werner Koch * Copyright (C) 2020 g10 Code GmbH * * This file is part of GnuPG. * * GnuPG is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * GnuPG is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * SPDX-License-Identifier: GPL-3.0-or-later */ #include #include #include #include #include #include #include #include #include #ifndef HAVE_W32_SYSTEM #include #include #endif /*HAVE_W32_SYSTEM*/ #include #include #include #define INCLUDED_BY_MAIN_MODULE 1 #define GNUPG_COMMON_NEED_AFLOCAL #include "scdaemon.h" #include #include #include /* malloc hooks */ #include "../common/i18n.h" #include "../common/sysutils.h" #include "iso7816.h" #include "apdu.h" #include "ccid-driver.h" #include "../common/gc-opt-flags.h" #include "../common/asshelp.h" #include "../common/exechelp.h" +#include "../common/comopt.h" #include "../common/init.h" #ifndef ENAMETOOLONG # define ENAMETOOLONG EINVAL #endif enum cmd_and_opt_values { aNull = 0, oCsh = 'c', oQuiet = 'q', oSh = 's', oVerbose = 'v', oNoVerbose = 500, aGPGConfList, aGPGConfTest, oOptions, oDebug, oDebugAll, oDebugLevel, oDebugWait, oDebugAllowCoreDump, oDebugCCIDDriver, oDebugLogTid, oDebugAssuanLogCats, oNoGreeting, oNoOptions, oHomedir, oNoDetach, oNoGrab, oLogFile, oServer, oMultiServer, oDaemon, oBatch, oReaderPort, oCardTimeout, octapiDriver, opcscDriver, opcscShared, oDisableCCID, oDisableOpenSC, oDisablePinpad, oAllowAdmin, oDenyAdmin, oDisableApplication, oApplicationPriority, oEnablePinpadVarlen, oListenBacklog }; static gpgrt_opt_t opts[] = { ARGPARSE_c (aGPGConfList, "gpgconf-list", "@"), ARGPARSE_c (aGPGConfTest, "gpgconf-test", "@"), ARGPARSE_header (NULL, N_("Options used for startup")), ARGPARSE_s_n (oServer,"server", N_("run in server mode (foreground)")), ARGPARSE_s_n (oMultiServer, "multi-server", N_("run in multi server mode (foreground)")), ARGPARSE_s_n (oDaemon, "daemon", N_("run in daemon mode (background)")), ARGPARSE_s_n (oNoDetach, "no-detach", N_("do not detach from the console")), ARGPARSE_s_n (oSh, "sh", N_("sh-style command output")), ARGPARSE_s_n (oCsh, "csh", N_("csh-style command output")), ARGPARSE_s_s (oHomedir, "homedir", "@"), ARGPARSE_conffile (oOptions, "options", N_("|FILE|read options from FILE")), ARGPARSE_noconffile (oNoOptions, "no-options", "@"), ARGPARSE_header ("Monitor", N_("Options controlling the diagnostic output")), ARGPARSE_s_n (oVerbose, "verbose", N_("verbose")), ARGPARSE_s_n (oQuiet, "quiet", N_("be somewhat more quiet")), ARGPARSE_s_s (oDebug, "debug", "@"), ARGPARSE_s_n (oDebugAll, "debug-all", "@"), ARGPARSE_s_s (oDebugLevel, "debug-level" , N_("|LEVEL|set the debugging level to LEVEL")), ARGPARSE_s_i (oDebugWait, "debug-wait", "@"), ARGPARSE_s_n (oDebugAllowCoreDump, "debug-allow-core-dump", "@"), ARGPARSE_s_n (oDebugCCIDDriver, "debug-ccid-driver", "@"), ARGPARSE_s_n (oDebugLogTid, "debug-log-tid", "@"), ARGPARSE_p_u (oDebugAssuanLogCats, "debug-assuan-log-cats", "@"), ARGPARSE_s_s (oLogFile, "log-file", N_("|FILE|write a log to FILE")), ARGPARSE_header ("Configuration", N_("Options controlling the configuration")), ARGPARSE_s_s (oReaderPort, "reader-port", N_("|N|connect to reader at port N")), ARGPARSE_s_s (octapiDriver, "ctapi-driver", N_("|NAME|use NAME as ct-API driver")), ARGPARSE_s_s (opcscDriver, "pcsc-driver", N_("|NAME|use NAME as PC/SC driver")), ARGPARSE_s_n (opcscShared, "pcsc-shared", "@"), ARGPARSE_s_n (oDisableCCID, "disable-ccid", #ifdef HAVE_LIBUSB N_("do not use the internal CCID driver") #else "@" #endif /* end --disable-ccid */), ARGPARSE_s_u (oCardTimeout, "card-timeout", N_("|N|disconnect the card after N seconds of inactivity")), ARGPARSE_s_n (oDisablePinpad, "disable-pinpad", N_("do not use a reader's pinpad")), ARGPARSE_ignore (300, "disable-keypad"), ARGPARSE_s_n (oEnablePinpadVarlen, "enable-pinpad-varlen", N_("use variable length input for pinpad")), ARGPARSE_s_s (oDisableApplication, "disable-application", "@"), ARGPARSE_s_s (oApplicationPriority, "application-priority", N_("|LIST|change the application priority to LIST")), ARGPARSE_s_i (oListenBacklog, "listen-backlog", "@"), ARGPARSE_header("Security", N_("Options controlling the security")), ARGPARSE_s_n (oAllowAdmin, "allow-admin", "@"), ARGPARSE_s_n (oDenyAdmin, "deny-admin", N_("deny the use of admin card commands")), ARGPARSE_end () }; /* The list of supported debug flags. */ static struct debug_flags_s debug_flags [] = { { DBG_MPI_VALUE , "mpi" }, { DBG_CRYPTO_VALUE , "crypto" }, { DBG_MEMORY_VALUE , "memory" }, { DBG_CACHE_VALUE , "cache" }, { DBG_MEMSTAT_VALUE, "memstat" }, { DBG_HASHING_VALUE, "hashing" }, { DBG_IPC_VALUE , "ipc" }, { DBG_CARD_IO_VALUE, "cardio" }, { DBG_READER_VALUE , "reader" }, { DBG_APP_VALUE , "app" }, { 0, NULL } }; /* The card driver we use by default for PC/SC. */ #if defined(HAVE_W32_SYSTEM) || defined(__CYGWIN__) #define DEFAULT_PCSC_DRIVER "winscard.dll" #elif defined(__APPLE__) #define DEFAULT_PCSC_DRIVER "/System/Library/Frameworks/PCSC.framework/PCSC" #elif defined(__GLIBC__) #define DEFAULT_PCSC_DRIVER "libpcsclite.so.1" #else #define DEFAULT_PCSC_DRIVER "libpcsclite.so" #endif /* The timer tick used to check card removal. We poll every 500ms to let the user immediately know a status change. For a card reader with an interrupt endpoint, this timer is not used with the internal CCID driver. This is not too good for power saving but given that there is no easy way to block on card status changes it is the best we can do. For PC/SC we could in theory use an extra thread to wait for status changes but that requires a native thread because there is no way to make the underlying PC/SC card change function block using a Npth mechanism. Given that a native thread could only be used under W32 we don't do that at all. */ #define TIMERTICK_INTERVAL_SEC (0) #define TIMERTICK_INTERVAL_USEC (500000) /* Flag to indicate that a shutdown was requested. */ static int shutdown_pending; /* It is possible that we are currently running under setuid permissions */ static int maybe_setuid = 1; /* Flag telling whether we are running as a pipe server. */ static int pipe_server; /* Name of the communication socket */ static char *socket_name; /* Name of the redirected socket or NULL. */ static char *redir_socket_name; /* We need to keep track of the server's nonces (these are dummies for POSIX systems). */ static assuan_sock_nonce_t socket_nonce; /* Value for the listen() backlog argument. Change at runtime with * --listen-backlog. */ static int listen_backlog = 64; #ifdef HAVE_W32_SYSTEM static HANDLE the_event; #else /* PID to notify update of usb devices. */ static pid_t main_thread_pid; #endif #ifdef HAVE_PSELECT_NO_EINTR /* FD to notify changes. */ static int notify_fd; #endif static char *create_socket_name (char *standard_name); static gnupg_fd_t create_server_socket (const char *name, char **r_redir_name, assuan_sock_nonce_t *nonce); static void *start_connection_thread (void *arg); static void handle_connections (int listen_fd); /* Pth wrapper function definitions. */ ASSUAN_SYSTEM_NPTH_IMPL; static int active_connections; static char * make_libversion (const char *libname, const char *(*getfnc)(const char*)) { const char *s; char *result; if (maybe_setuid) { gcry_control (GCRYCTL_INIT_SECMEM, 0, 0); /* Drop setuid. */ maybe_setuid = 0; } s = getfnc (NULL); result = xmalloc (strlen (libname) + 1 + strlen (s) + 1); strcpy (stpcpy (stpcpy (result, libname), " "), s); return result; } static const char * my_strusage (int level) { static char *ver_gcry, *ver_ksba; const char *p; switch (level) { case 9: p = "GPL-3.0-or-later"; break; case 11: p = "@SCDAEMON@ (@GNUPG@)"; break; case 13: p = VERSION; break; case 14: p = GNUPG_DEF_COPYRIGHT_LINE; break; case 17: p = PRINTABLE_OS_NAME; break; case 19: p = _("Please report bugs to <@EMAIL@>.\n"); break; case 20: if (!ver_gcry) ver_gcry = make_libversion ("libgcrypt", gcry_check_version); p = ver_gcry; break; case 21: if (!ver_ksba) ver_ksba = make_libversion ("libksba", ksba_check_version); p = ver_ksba; break; case 1: case 40: p = _("Usage: @SCDAEMON@ [options] (-h for help)"); break; case 41: p = _("Syntax: scdaemon [options] [command [args]]\n" "Smartcard daemon for @GNUPG@\n"); break; default: p = NULL; } return p; } static int tid_log_callback (unsigned long *rvalue) { int len = sizeof (*rvalue); npth_t thread; thread = npth_self (); if (sizeof (thread) < len) len = sizeof (thread); memcpy (rvalue, &thread, len); return 2; /* Use use hex representation. */ } /* Setup the debugging. With a LEVEL of NULL only the active debug flags are propagated to the subsystems. With LEVEL set, a specific set of debug flags is set; thus overriding all flags already set. */ static void set_debug (const char *level) { int numok = (level && digitp (level)); int numlvl = numok? atoi (level) : 0; if (!level) ; else if (!strcmp (level, "none") || (numok && numlvl < 1)) opt.debug = 0; else if (!strcmp (level, "basic") || (numok && numlvl <= 2)) opt.debug = DBG_IPC_VALUE; else if (!strcmp (level, "advanced") || (numok && numlvl <= 5)) opt.debug = DBG_IPC_VALUE; else if (!strcmp (level, "expert") || (numok && numlvl <= 8)) opt.debug = (DBG_IPC_VALUE|DBG_CACHE_VALUE|DBG_CARD_IO_VALUE); else if (!strcmp (level, "guru") || numok) { opt.debug = ~0; /* Unless the "guru" string has been used we don't want to allow hashing debugging. The rationale is that people tend to select the highest debug value and would then clutter their disk with debug files which may reveal confidential data. */ if (numok) opt.debug &= ~(DBG_HASHING_VALUE); } else { log_error (_("invalid debug-level '%s' given\n"), level); scd_exit(2); } if (opt.debug && !opt.verbose) opt.verbose = 1; if (opt.debug && opt.quiet) opt.quiet = 0; if (opt.debug & DBG_MPI_VALUE) gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 2); if (opt.debug & DBG_CRYPTO_VALUE ) gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 1); gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose); if (opt.debug) parse_debug_flag (NULL, &opt.debug, debug_flags); } static void cleanup (void) { if (socket_name && *socket_name) { char *name; name = redir_socket_name? redir_socket_name : socket_name; gnupg_remove (name); *socket_name = 0; } } static void setup_signal_mask (void) { #ifndef HAVE_W32_SYSTEM npth_sigev_init (); npth_sigev_add (SIGHUP); npth_sigev_add (SIGUSR1); npth_sigev_add (SIGUSR2); npth_sigev_add (SIGINT); npth_sigev_add (SIGCONT); npth_sigev_add (SIGTERM); npth_sigev_fini (); main_thread_pid = getpid (); #endif } int main (int argc, char **argv ) { gpgrt_argparse_t pargs; int orig_argc; char **orig_argv; char *last_configname = NULL; const char *configname = NULL; const char *shell; int debug_argparser = 0; const char *debug_level = NULL; int greeting = 0; int nogreeting = 0; int multi_server = 0; int is_daemon = 0; int nodetach = 0; int csh_style = 0; char *logfile = NULL; int debug_wait = 0; int gpgconf_list = 0; char *config_filename = NULL; int allow_coredump = 0; struct assuan_malloc_hooks malloc_hooks; int res; npth_t pipecon_handler; const char *application_priority = NULL; early_system_init (); gpgrt_set_strusage (my_strusage); gcry_control (GCRYCTL_SUSPEND_SECMEM_WARN); /* Please note that we may running SUID(ROOT), so be very CAREFUL when adding any stuff between here and the call to INIT_SECMEM() somewhere after the option parsing */ log_set_prefix ("scdaemon", GPGRT_LOG_WITH_PREFIX | GPGRT_LOG_WITH_PID); /* Make sure that our subsystems are ready. */ i18n_init (); init_common_subsystems (&argc, &argv); ksba_set_malloc_hooks (gcry_malloc, gcry_realloc, gcry_free); malloc_hooks.malloc = gcry_malloc; malloc_hooks.realloc = gcry_realloc; malloc_hooks.free = gcry_free; assuan_set_malloc_hooks (&malloc_hooks); assuan_set_gpg_err_source (GPG_ERR_SOURCE_DEFAULT); assuan_set_system_hooks (ASSUAN_SYSTEM_NPTH); assuan_sock_init (); setup_libassuan_logging (&opt.debug, NULL); setup_libgcrypt_logging (); gcry_control (GCRYCTL_USE_SECURE_RNDPOOL); disable_core_dumps (); /* Set default options. */ opt.allow_admin = 1; opt.pcsc_driver = DEFAULT_PCSC_DRIVER; shell = getenv ("SHELL"); if (shell && strlen (shell) >= 3 && !strcmp (shell+strlen (shell)-3, "csh") ) csh_style = 1; /* Check whether we have a config file on the commandline */ orig_argc = argc; orig_argv = argv; pargs.argc = &argc; pargs.argv = &argv; pargs.flags= (ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); while (gpgrt_argparse (NULL, &pargs, opts)) { switch (pargs.r_opt) { case oDebug: case oDebugAll: debug_argparser++; break; case oHomedir: gnupg_set_homedir (pargs.r.ret_str); break; } } /* Reset the flags. */ pargs.flags &= ~(ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); /* initialize the secure memory. */ gcry_control (GCRYCTL_INIT_SECMEM, 16384, 0); maybe_setuid = 0; /* Now we are working under our real uid */ /* The configuraton directories for use by gpgrt_argparser. */ gpgrt_set_confdir (GPGRT_CONFDIR_SYS, gnupg_sysconfdir ()); gpgrt_set_confdir (GPGRT_CONFDIR_USER, gnupg_homedir ()); /* We are re-using the struct, thus the reset flag. We OR the * flags so that the internal intialized flag won't be cleared. */ argc = orig_argc; argv = orig_argv; pargs.argc = &argc; pargs.argv = &argv; pargs.flags |= (ARGPARSE_FLAG_RESET | ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_SYS | ARGPARSE_FLAG_USER); while (gpgrt_argparser (&pargs, opts, SCDAEMON_NAME EXTSEP_S "conf")) { switch (pargs.r_opt) { case ARGPARSE_CONFFILE: if (debug_argparser) log_info (_("reading options from '%s'\n"), pargs.r_type? pargs.r.ret_str: "[cmdline]"); if (pargs.r_type) { xfree (last_configname); last_configname = xstrdup (pargs.r.ret_str); configname = last_configname; } else configname = NULL; break; case aGPGConfList: gpgconf_list = 1; break; case aGPGConfTest: gpgconf_list = 2; break; case oQuiet: opt.quiet = 1; break; case oVerbose: opt.verbose++; break; case oBatch: opt.batch=1; break; case oDebug: if (parse_debug_flag (pargs.r.ret_str, &opt.debug, debug_flags)) { pargs.r_opt = ARGPARSE_INVALID_ARG; pargs.err = ARGPARSE_PRINT_ERROR; } break; case oDebugAll: opt.debug = ~0; break; case oDebugLevel: debug_level = pargs.r.ret_str; break; case oDebugWait: debug_wait = pargs.r.ret_int; break; case oDebugAllowCoreDump: enable_core_dumps (); allow_coredump = 1; break; case oDebugCCIDDriver: #ifdef HAVE_LIBUSB ccid_set_debug_level (ccid_set_debug_level (-1)+1); #endif /*HAVE_LIBUSB*/ break; case oDebugLogTid: log_set_pid_suffix_cb (tid_log_callback); break; case oDebugAssuanLogCats: set_libassuan_log_cats (pargs.r.ret_ulong); break; case oNoGreeting: nogreeting = 1; break; case oNoVerbose: opt.verbose = 0; break; case oHomedir: gnupg_set_homedir (pargs.r.ret_str); break; case oNoDetach: nodetach = 1; break; case oLogFile: logfile = pargs.r.ret_str; break; case oCsh: csh_style = 1; break; case oSh: csh_style = 0; break; case oServer: pipe_server = 1; break; case oMultiServer: pipe_server = 1; multi_server = 1; break; case oDaemon: is_daemon = 1; break; case oReaderPort: opt.reader_port = pargs.r.ret_str; break; case octapiDriver: opt.ctapi_driver = pargs.r.ret_str; break; case opcscDriver: opt.pcsc_driver = pargs.r.ret_str; break; case opcscShared: opt.pcsc_shared = 1; break; case oDisableCCID: opt.disable_ccid = 1; break; case oDisableOpenSC: break; case oDisablePinpad: opt.disable_pinpad = 1; break; case oAllowAdmin: /* Dummy because allow is now the default. */ break; case oDenyAdmin: opt.allow_admin = 0; break; case oCardTimeout: opt.card_timeout = pargs.r.ret_ulong; break; case oDisableApplication: add_to_strlist (&opt.disabled_applications, pargs.r.ret_str); break; case oApplicationPriority: application_priority = pargs.r.ret_str; break; case oEnablePinpadVarlen: opt.enable_pinpad_varlen = 1; break; case oListenBacklog: listen_backlog = pargs.r.ret_int; break; default: if (configname) pargs.err = ARGPARSE_PRINT_WARNING; else pargs.err = ARGPARSE_PRINT_ERROR; break; } } gpgrt_argparse (NULL, &pargs, NULL); /* Release internal state. */ if (!last_configname) config_filename = gpgrt_fnameconcat (gnupg_homedir (), SCDAEMON_NAME EXTSEP_S "conf", NULL); else { config_filename = last_configname; last_configname = NULL; } if (log_get_errorcount(0)) exit(2); + + /* Process common component options. */ + if (parse_comopt (GNUPG_MODULE_NAME_SCDAEMON, debug_argparser)) + exit(2); + + if (!logfile) + { + logfile = comopt.logfile; + comopt.logfile = NULL; + } + if (nogreeting ) greeting = 0; if (greeting) { es_fprintf (es_stderr, "%s %s; %s\n", gpgrt_strusage (11),gpgrt_strusage (13),gpgrt_strusage (14)); es_fprintf (es_stderr, "%s\n", gpgrt_strusage (15)); } #ifdef IS_DEVELOPMENT_VERSION log_info ("NOTE: this is a development version!\n"); #endif /* Print a warning if an argument looks like an option. */ if (!opt.quiet && !(pargs.flags & ARGPARSE_FLAG_STOP_SEEN)) { int i; for (i=0; i < argc; i++) if (argv[i][0] == '-' && argv[i][1] == '-') log_info (_("Note: '%s' is not considered an option\n"), argv[i]); } if (atexit (cleanup)) { log_error ("atexit failed\n"); cleanup (); exit (1); } set_debug (debug_level); if (initialize_module_command ()) { log_error ("initialization failed\n"); cleanup (); exit (1); } if (gpgconf_list == 2) scd_exit (0); if (gpgconf_list) { /* List options and default values in the GPG Conf format. */ es_printf ("debug-level:%lu:\"none:\n", GC_OPT_FLAG_DEFAULT); es_printf ("pcsc-driver:%lu:\"%s:\n", GC_OPT_FLAG_DEFAULT, DEFAULT_PCSC_DRIVER ); es_printf ("card-timeout:%lu:%d:\n", GC_OPT_FLAG_DEFAULT, 0); scd_exit (0); } /* Now start with logging to a file if this is desired. */ if (logfile) { log_set_file (logfile); log_set_prefix (NULL, (GPGRT_LOG_WITH_PREFIX | GPGRT_LOG_WITH_TIME | GPGRT_LOG_WITH_PID)); } if (debug_wait && pipe_server) { log_debug ("waiting for debugger - my pid is %u .....\n", (unsigned int)getpid()); gnupg_sleep (debug_wait); log_debug ("... okay\n"); } if (application_priority) app_update_priority_list (application_priority); if (pipe_server) { /* This is the simple pipe based server */ ctrl_t ctrl; npth_attr_t tattr; int fd = -1; #ifndef HAVE_W32_SYSTEM { struct sigaction sa; sa.sa_handler = SIG_IGN; sigemptyset (&sa.sa_mask); sa.sa_flags = 0; sigaction (SIGPIPE, &sa, NULL); } #endif npth_init (); setup_signal_mask (); gpgrt_set_syscall_clamp (npth_unprotect, npth_protect); /* If --debug-allow-core-dump has been given we also need to switch the working directory to a place where we can actually write. */ if (allow_coredump) { if (chdir("/tmp")) log_debug ("chdir to '/tmp' failed: %s\n", strerror (errno)); else log_debug ("changed working directory to '/tmp'\n"); } /* In multi server mode we need to listen on an additional socket. Create that socket now before starting the handler for the pipe connection. This allows that handler to send back the name of that socket. */ if (multi_server) { socket_name = create_socket_name (SCDAEMON_SOCK_NAME); fd = FD2INT(create_server_socket (socket_name, &redir_socket_name, &socket_nonce)); } res = npth_attr_init (&tattr); if (res) { log_error ("error allocating thread attributes: %s\n", strerror (res)); scd_exit (2); } npth_attr_setdetachstate (&tattr, NPTH_CREATE_DETACHED); ctrl = xtrycalloc (1, sizeof *ctrl); if ( !ctrl ) { log_error ("error allocating connection control data: %s\n", strerror (errno) ); scd_exit (2); } ctrl->thread_startup.fd = GNUPG_INVALID_FD; res = npth_create (&pipecon_handler, &tattr, start_connection_thread, ctrl); if (res) { log_error ("error spawning pipe connection handler: %s\n", strerror (res) ); xfree (ctrl); scd_exit (2); } npth_setname_np (pipecon_handler, "pipe-connection"); npth_attr_destroy (&tattr); /* We run handle_connection to wait for the shutdown signal and to run the ticker stuff. */ handle_connections (fd); if (fd != -1) close (fd); } else if (!is_daemon) { log_info (_("please use the option '--daemon'" " to run the program in the background\n")); } else { /* Regular server mode */ int fd; #ifndef HAVE_W32_SYSTEM pid_t pid; int i; #endif /* Create the socket. */ socket_name = create_socket_name (SCDAEMON_SOCK_NAME); fd = FD2INT (create_server_socket (socket_name, &redir_socket_name, &socket_nonce)); fflush (NULL); #ifdef HAVE_W32_SYSTEM (void)csh_style; (void)nodetach; #else pid = fork (); if (pid == (pid_t)-1) { log_fatal ("fork failed: %s\n", strerror (errno) ); exit (1); } else if (pid) { /* we are the parent */ char *infostr; close (fd); /* create the info string: :: */ if (gpgrt_asprintf (&infostr, "SCDAEMON_INFO=%s:%lu:1", socket_name, (ulong) pid) < 0) { log_error ("out of core\n"); kill (pid, SIGTERM); exit (1); } *socket_name = 0; /* don't let cleanup() remove the socket - the child should do this from now on */ if (argc) { /* run the program given on the commandline */ if (putenv (infostr)) { log_error ("failed to set environment: %s\n", strerror (errno) ); kill (pid, SIGTERM ); exit (1); } execvp (argv[0], argv); log_error ("failed to run the command: %s\n", strerror (errno)); kill (pid, SIGTERM); exit (1); } else { /* Print the environment string, so that the caller can use shell's eval to set it */ if (csh_style) { *strchr (infostr, '=') = ' '; es_printf ( "setenv %s;\n", infostr); } else { es_printf ( "%s; export SCDAEMON_INFO;\n", infostr); } xfree (infostr); exit (0); } /* NOTREACHED */ } /* end parent */ /* This is the child. */ npth_init (); setup_signal_mask (); gpgrt_set_syscall_clamp (npth_unprotect, npth_protect); /* Detach from tty and put process into a new session. */ if (!nodetach ) { /* Close stdin, stdout and stderr unless it is the log stream. */ for (i=0; i <= 2; i++) { if (!log_test_fd (i) && i != fd ) { if ( !close (i) && open ("/dev/null", i? O_WRONLY : O_RDONLY) == -1) { log_error ("failed to open '%s': %s\n", "/dev/null", strerror (errno)); cleanup (); exit (1); } } } if (setsid() == -1) { log_error ("setsid() failed: %s\n", strerror(errno) ); cleanup (); exit (1); } } { struct sigaction sa; sa.sa_handler = SIG_IGN; sigemptyset (&sa.sa_mask); sa.sa_flags = 0; sigaction (SIGPIPE, &sa, NULL); } #endif /*!HAVE_W32_SYSTEM*/ if (gnupg_chdir (gnupg_daemon_rootdir ())) { log_error ("chdir to '%s' failed: %s\n", gnupg_daemon_rootdir (), strerror (errno)); exit (1); } handle_connections (fd); close (fd); } xfree (config_filename); return 0; } void scd_exit (int rc) { apdu_prepare_exit (); #if 0 #warning no update_random_seed_file update_random_seed_file(); #endif #if 0 /* at this time a bit annoying */ if (opt.debug & DBG_MEMSTAT_VALUE) { gcry_control( GCRYCTL_DUMP_MEMORY_STATS ); gcry_control( GCRYCTL_DUMP_RANDOM_STATS ); } if (opt.debug) gcry_control (GCRYCTL_DUMP_SECMEM_STATS ); #endif gcry_control (GCRYCTL_TERM_SECMEM ); rc = rc? rc : log_get_errorcount(0)? 2 : 0; exit (rc); } static void scd_init_default_ctrl (ctrl_t ctrl) { (void)ctrl; } static void scd_deinit_default_ctrl (ctrl_t ctrl) { if (!ctrl) return; xfree (ctrl->in_data.value); ctrl->in_data.value = NULL; ctrl->in_data.valuelen = 0; } /* Return the name of the socket to be used to connect to this process. If no socket is available, return NULL. */ const char * scd_get_socket_name () { if (socket_name && *socket_name) return socket_name; return NULL; } #ifndef HAVE_W32_SYSTEM static void handle_signal (int signo) { switch (signo) { case SIGHUP: log_info ("SIGHUP received - " "re-reading configuration and resetting cards\n"); /* reread_configuration (); */ break; case SIGUSR1: log_info ("SIGUSR1 received - printing internal information:\n"); /* Fixme: We need to see how to integrate pth dumping into our logging system. */ /* pth_ctrl (PTH_CTRL_DUMPSTATE, log_get_stream ()); */ app_dump_state (); break; case SIGUSR2: log_info ("SIGUSR2 received - no action defined\n"); break; case SIGCONT: /* Nothing. */ log_debug ("SIGCONT received - breaking select\n"); break; case SIGTERM: if (!shutdown_pending) log_info ("SIGTERM received - shutting down ...\n"); else log_info ("SIGTERM received - still %i running threads\n", active_connections); shutdown_pending++; if (shutdown_pending > 2) { log_info ("shutdown forced\n"); log_info ("%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13)); cleanup (); scd_exit (0); } break; case SIGINT: log_info ("SIGINT received - immediate shutdown\n"); log_info( "%s %s stopped\n", gpgrt_strusage(11), gpgrt_strusage(13)); cleanup (); scd_exit (0); break; default: log_info ("signal %d received - no action defined\n", signo); } } #endif /*!HAVE_W32_SYSTEM*/ /* Create a name for the socket. We check for valid characters as well as against a maximum allowed length for a unix domain socket is done. The function terminates the process in case of an error. Returns: Pointer to an allocated string with the absolute name of the socket used. */ static char * create_socket_name (char *standard_name) { char *name; name = make_filename (gnupg_socketdir (), standard_name, NULL); if (strchr (name, PATHSEP_C)) { log_error (("'%s' are not allowed in the socket name\n"), PATHSEP_S); scd_exit (2); } return name; } /* Create a Unix domain socket with NAME. Returns the file descriptor or terminates the process in case of an error. If the socket has been redirected the name of the real socket is stored as a malloced string at R_REDIR_NAME. */ static gnupg_fd_t create_server_socket (const char *name, char **r_redir_name, assuan_sock_nonce_t *nonce) { struct sockaddr *addr; struct sockaddr_un *unaddr; socklen_t len; gnupg_fd_t fd; int rc; xfree (*r_redir_name); *r_redir_name = NULL; fd = assuan_sock_new (AF_UNIX, SOCK_STREAM, 0); if (fd == GNUPG_INVALID_FD) { log_error (_("can't create socket: %s\n"), strerror (errno)); scd_exit (2); } unaddr = xmalloc (sizeof (*unaddr)); addr = (struct sockaddr*)unaddr; { int redirected; if (assuan_sock_set_sockaddr_un (name, addr, &redirected)) { if (errno == ENAMETOOLONG) log_error (_("socket name '%s' is too long\n"), name); else log_error ("error preparing socket '%s': %s\n", name, gpg_strerror (gpg_error_from_syserror ())); scd_exit (2); } if (redirected) { *r_redir_name = xstrdup (unaddr->sun_path); if (opt.verbose) log_info ("redirecting socket '%s' to '%s'\n", name, *r_redir_name); } } len = SUN_LEN (unaddr); rc = assuan_sock_bind (fd, addr, len); if (rc == -1 && errno == EADDRINUSE) { gnupg_remove (unaddr->sun_path); rc = assuan_sock_bind (fd, addr, len); } if (rc != -1 && (rc=assuan_sock_get_nonce (addr, len, nonce))) log_error (_("error getting nonce for the socket\n")); if (rc == -1) { log_error (_("error binding socket to '%s': %s\n"), unaddr->sun_path, gpg_strerror (gpg_error_from_syserror ())); assuan_sock_close (fd); scd_exit (2); } if (gnupg_chmod (unaddr->sun_path, "-rwx")) log_error (_("can't set permissions of '%s': %s\n"), unaddr->sun_path, strerror (errno)); if (listen (FD2INT(fd), listen_backlog) == -1) { log_error ("listen(fd, %d) failed: %s\n", listen_backlog, gpg_strerror (gpg_error_from_syserror ())); assuan_sock_close (fd); scd_exit (2); } if (opt.verbose) log_info (_("listening on socket '%s'\n"), unaddr->sun_path); return fd; } /* This is the standard connection thread's main function. */ static void * start_connection_thread (void *arg) { ctrl_t ctrl = arg; if (ctrl->thread_startup.fd != GNUPG_INVALID_FD && assuan_sock_check_nonce (ctrl->thread_startup.fd, &socket_nonce)) { log_info (_("error reading nonce on fd %d: %s\n"), FD2INT(ctrl->thread_startup.fd), strerror (errno)); assuan_sock_close (ctrl->thread_startup.fd); xfree (ctrl); return NULL; } active_connections++; scd_init_default_ctrl (ctrl); if (opt.verbose) log_info (_("handler for fd %d started\n"), FD2INT(ctrl->thread_startup.fd)); /* If this is a pipe server, we request a shutdown if the command handler asked for it. With the next ticker event and given that no other connections are running the shutdown will then happen. */ if (scd_command_handler (ctrl, FD2INT(ctrl->thread_startup.fd)) && pipe_server) shutdown_pending = 1; if (opt.verbose) log_info (_("handler for fd %d terminated\n"), FD2INT (ctrl->thread_startup.fd)); scd_deinit_default_ctrl (ctrl); xfree (ctrl); if (--active_connections == 0) scd_kick_the_loop (); return NULL; } void scd_kick_the_loop (void) { /* Kick the select loop. */ #ifdef HAVE_W32_SYSTEM int ret = SetEvent (the_event); if (ret == 0) log_error ("SetEvent for scd_kick_the_loop failed: %s\n", w32_strerror (-1)); #elif defined(HAVE_PSELECT_NO_EINTR) write (notify_fd, "", 1); #else int ret = kill (main_thread_pid, SIGCONT); if (ret < 0) log_error ("SetEvent for scd_kick_the_loop failed: %s\n", gpg_strerror (gpg_error_from_syserror ())); #endif } /* Connection handler loop. Wait for connection requests and spawn a thread after accepting a connection. LISTEN_FD is allowed to be -1 in which case this code will only do regular timeouts and handle signals. */ static void handle_connections (int listen_fd) { npth_attr_t tattr; struct sockaddr_un paddr; socklen_t plen; fd_set fdset, read_fdset; int nfd; int ret; int fd; struct timespec timeout; struct timespec *t; int saved_errno; #ifdef HAVE_W32_SYSTEM HANDLE events[2]; unsigned int events_set; #else int signo; #endif #ifdef HAVE_PSELECT_NO_EINTR int pipe_fd[2]; ret = gnupg_create_pipe (pipe_fd); if (ret) { log_error ("pipe creation failed: %s\n", gpg_strerror (ret)); return; } notify_fd = pipe_fd[1]; #endif ret = npth_attr_init(&tattr); if (ret) { log_error ("npth_attr_init failed: %s\n", strerror (ret)); return; } npth_attr_setdetachstate (&tattr, NPTH_CREATE_DETACHED); #ifdef HAVE_W32_SYSTEM { HANDLE h, h2; SECURITY_ATTRIBUTES sa = { sizeof (SECURITY_ATTRIBUTES), NULL, TRUE}; events[0] = the_event = INVALID_HANDLE_VALUE; events[1] = INVALID_HANDLE_VALUE; h = CreateEvent (&sa, TRUE, FALSE, NULL); if (!h) log_error ("can't create scd event: %s\n", w32_strerror (-1) ); else if (!DuplicateHandle (GetCurrentProcess(), h, GetCurrentProcess(), &h2, EVENT_MODIFY_STATE|SYNCHRONIZE, TRUE, 0)) { log_error ("setting synchronize for scd_kick_the_loop failed: %s\n", w32_strerror (-1) ); CloseHandle (h); } else { CloseHandle (h); events[0] = the_event = h2; } } #endif FD_ZERO (&fdset); nfd = 0; if (listen_fd != -1) { FD_SET (listen_fd, &fdset); nfd = listen_fd; } for (;;) { int periodical_check; int max_fd = nfd; if (shutdown_pending) { if (active_connections == 0) break; /* ready */ /* Do not accept anymore connections but wait for existing connections to terminate. We do this by clearing out all file descriptors to wait for, so that the select will be used to just wait on a signal or timeout event. */ FD_ZERO (&fdset); listen_fd = -1; } periodical_check = scd_update_reader_status_file (); timeout.tv_sec = TIMERTICK_INTERVAL_SEC; timeout.tv_nsec = TIMERTICK_INTERVAL_USEC * 1000; if (shutdown_pending || periodical_check) t = &timeout; else t = NULL; /* POSIX says that fd_set should be implemented as a structure, thus a simple assignment is fine to copy the entire set. */ read_fdset = fdset; #ifdef HAVE_PSELECT_NO_EINTR FD_SET (pipe_fd[0], &read_fdset); if (max_fd < pipe_fd[0]) max_fd = pipe_fd[0]; #else (void)max_fd; #endif #ifndef HAVE_W32_SYSTEM ret = npth_pselect (max_fd+1, &read_fdset, NULL, NULL, t, npth_sigev_sigmask ()); saved_errno = errno; while (npth_sigev_get_pending(&signo)) handle_signal (signo); #else ret = npth_eselect (nfd+1, &read_fdset, NULL, NULL, t, events, &events_set); saved_errno = errno; if (events_set & 1) continue; #endif if (ret == -1 && saved_errno != EINTR) { log_error (_("npth_pselect failed: %s - waiting 1s\n"), strerror (saved_errno)); npth_sleep (1); continue; } if (ret <= 0) /* Timeout. Will be handled when calculating the next timeout. */ continue; #ifdef HAVE_PSELECT_NO_EINTR if (FD_ISSET (pipe_fd[0], &read_fdset)) { char buf[256]; read (pipe_fd[0], buf, sizeof buf); } #endif if (listen_fd != -1 && FD_ISSET (listen_fd, &read_fdset)) { ctrl_t ctrl; plen = sizeof paddr; fd = npth_accept (listen_fd, (struct sockaddr *)&paddr, &plen); if (fd == -1) { log_error ("accept failed: %s\n", strerror (errno)); } else if ( !(ctrl = xtrycalloc (1, sizeof *ctrl)) ) { log_error ("error allocating connection control data: %s\n", strerror (errno) ); close (fd); } else { char threadname[50]; npth_t thread; snprintf (threadname, sizeof threadname, "conn fd=%d", fd); ctrl->thread_startup.fd = INT2FD (fd); ret = npth_create (&thread, &tattr, start_connection_thread, ctrl); if (ret) { log_error ("error spawning connection handler: %s\n", strerror (ret)); xfree (ctrl); close (fd); } else npth_setname_np (thread, threadname); } } } #ifdef HAVE_W32_SYSTEM if (the_event != INVALID_HANDLE_VALUE) CloseHandle (the_event); #endif #ifdef HAVE_PSELECT_NO_EINTR close (pipe_fd[0]); close (pipe_fd[1]); #endif cleanup (); log_info (_("%s %s stopped\n"), gpgrt_strusage(11), gpgrt_strusage(13)); npth_attr_destroy (&tattr); } /* Return the number of active connections. */ int get_active_connection_count (void) { return active_connections; }