diff --git a/g10/gpg.c b/g10/gpg.c index dbbe990c7..632a8a558 100644 --- a/g10/gpg.c +++ b/g10/gpg.c @@ -1,5518 +1,5520 @@ /* gpg.c - The GnuPG utility (main for gpg) * Copyright (C) 1998-2020 Free Software Foundation, Inc. * Copyright (C) 1997-2019 Werner Koch * Copyright (C) 2015-2020 g10 Code GmbH * * This file is part of GnuPG. * * GnuPG is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * GnuPG is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * SPDX-License-Identifier: GPL-3.0-or-later */ #include #include #include #include #include #include #include #ifdef HAVE_STAT #include /* for stat() */ #endif #include #ifdef HAVE_W32_SYSTEM # ifdef HAVE_WINSOCK2_H # include # endif # include #endif #define INCLUDED_BY_MAIN_MODULE 1 #include "gpg.h" #include #include "../common/iobuf.h" #include "../common/util.h" #include "packet.h" #include "../common/membuf.h" #include "main.h" #include "options.h" #include "keydb.h" #include "trustdb.h" #include "filter.h" #include "../common/ttyio.h" #include "../common/i18n.h" #include "../common/sysutils.h" #include "../common/status.h" #include "keyserver-internal.h" #include "exec.h" #include "../common/gc-opt-flags.h" #include "../common/asshelp.h" #include "call-dirmngr.h" #include "tofu.h" #include "../common/init.h" #include "../common/mbox-util.h" #include "../common/shareddefs.h" #include "../common/compliance.h" #if defined(HAVE_DOSISH_SYSTEM) || defined(__CYGWIN__) #define MY_O_BINARY O_BINARY #ifndef S_IRGRP # define S_IRGRP 0 # define S_IWGRP 0 #endif #else #define MY_O_BINARY 0 #endif enum cmd_and_opt_values { aNull = 0, oArmor = 'a', aDetachedSign = 'b', aSym = 'c', aDecrypt = 'd', aEncr = 'e', oRecipientFile = 'f', oHiddenRecipientFile = 'F', oInteractive = 'i', aListKeys = 'k', oDryRun = 'n', oOutput = 'o', oQuiet = 'q', oRecipient = 'r', oHiddenRecipient = 'R', aSign = 's', oTextmodeShort= 't', oLocalUser = 'u', oVerbose = 'v', oCompress = 'z', oSetNotation = 'N', aListSecretKeys = 'K', oBatch = 500, oMaxOutput, oInputSizeHint, oSigNotation, oCertNotation, oShowNotation, oNoShowNotation, oKnownNotation, aEncrFiles, aEncrSym, aDecryptFiles, aClearsign, aStore, aQuickKeygen, aFullKeygen, aKeygen, aSignEncr, aSignEncrSym, aSignSym, aSignKey, aLSignKey, aQuickSignKey, aQuickLSignKey, aQuickRevSig, aQuickAddUid, aQuickAddKey, aQuickRevUid, aQuickSetExpire, aQuickSetPrimaryUid, aListConfig, aListGcryptConfig, aGPGConfList, aGPGConfTest, aListPackets, aEditKey, aDeleteKeys, aDeleteSecretKeys, aDeleteSecretAndPublicKeys, aImport, aFastImport, aVerify, aVerifyFiles, aListSigs, aSendKeys, aRecvKeys, aLocateKeys, aLocateExtKeys, aSearchKeys, aRefreshKeys, aFetchKeys, aShowKeys, aExport, aExportSecret, aExportSecretSub, aExportSshKey, aCheckKeys, aGenRevoke, aDesigRevoke, aPrimegen, aPrintMD, aPrintMDs, aCheckTrustDB, aUpdateTrustDB, aFixTrustDB, aListTrustDB, aListTrustPath, aExportOwnerTrust, aImportOwnerTrust, aDeArmor, aEnArmor, aGenRandom, aRebuildKeydbCaches, aCardStatus, aCardEdit, aChangePIN, aPasswd, aServer, aTOFUPolicy, oMimemode, oTextmode, oNoTextmode, oExpert, oNoExpert, oDefSigExpire, oAskSigExpire, oNoAskSigExpire, oDefCertExpire, oAskCertExpire, oNoAskCertExpire, oDefCertLevel, oMinCertLevel, oAskCertLevel, oNoAskCertLevel, oFingerprint, oWithFingerprint, oWithSubkeyFingerprint, oWithICAOSpelling, oWithKeygrip, oWithSecret, oWithWKDHash, oWithColons, oWithKeyData, oWithKeyOrigin, oWithTofuInfo, oWithSigList, oWithSigCheck, oAnswerYes, oAnswerNo, oKeyring, oPrimaryKeyring, oSecretKeyring, oShowKeyring, oDefaultKey, oDefRecipient, oDefRecipientSelf, oNoDefRecipient, oTrySecretKey, oOptions, oDebug, oDebugLevel, oDebugAll, oDebugIOLBF, oStatusFD, oStatusFile, oAttributeFD, oAttributeFile, oEmitVersion, oNoEmitVersion, oCompletesNeeded, oMarginalsNeeded, oMaxCertDepth, oLoadExtension, oCompliance, oGnuPG, oRFC2440, oRFC4880, oRFC4880bis, oOpenPGP, oPGP6, oPGP7, oPGP8, oDE_VS, oRFC2440Text, oNoRFC2440Text, oCipherAlgo, oDigestAlgo, oCertDigestAlgo, oCompressAlgo, oCompressLevel, oBZ2CompressLevel, oBZ2DecompressLowmem, oPassphrase, oPassphraseFD, oPassphraseFile, oPassphraseRepeat, oPinentryMode, oCommandFD, oCommandFile, oQuickRandom, oNoVerbose, oTrustDBName, oNoSecmemWarn, oRequireSecmem, oNoRequireSecmem, oNoPermissionWarn, oNoArmor, oNoDefKeyring, oNoKeyring, oNoGreeting, oNoTTY, oNoOptions, oNoBatch, oHomedir, oSkipVerify, oSkipHiddenRecipients, oNoSkipHiddenRecipients, oAlwaysTrust, oTrustModel, oForceOwnertrust, oSetFilename, oForYourEyesOnly, oNoForYourEyesOnly, oSetPolicyURL, oSigPolicyURL, oCertPolicyURL, oShowPolicyURL, oNoShowPolicyURL, oSigKeyserverURL, oUseEmbeddedFilename, oNoUseEmbeddedFilename, oComment, oDefaultComment, oNoComments, oThrowKeyids, oNoThrowKeyids, oShowPhotos, oNoShowPhotos, oPhotoViewer, oS2KMode, oS2KDigest, oS2KCipher, oS2KCount, oDisplayCharset, oNotDashEscaped, oEscapeFrom, oNoEscapeFrom, oLockOnce, oLockMultiple, oLockNever, oKeyServer, oKeyServerOptions, oImportOptions, oImportFilter, oExportOptions, oExportFilter, oListOptions, oVerifyOptions, oTempDir, oExecPath, oEncryptTo, oHiddenEncryptTo, oNoEncryptTo, oEncryptToDefaultKey, oLoggerFD, oLoggerFile, oUtf8Strings, oNoUtf8Strings, oDisableCipherAlgo, oDisablePubkeyAlgo, oAllowNonSelfsignedUID, oNoAllowNonSelfsignedUID, oAllowFreeformUID, oNoAllowFreeformUID, oAllowSecretKeyImport, oEnableSpecialFilenames, oNoLiteral, oSetFilesize, oHonorHttpProxy, oFastListMode, oListOnly, oIgnoreTimeConflict, oIgnoreValidFrom, oIgnoreCrcError, oIgnoreMDCError, oShowSessionKey, oOverrideSessionKey, oOverrideSessionKeyFD, oNoRandomSeedFile, oAutoKeyRetrieve, oNoAutoKeyRetrieve, oAutoKeyImport, oNoAutoKeyImport, oUseAgent, oNoUseAgent, oGpgAgentInfo, oMergeOnly, oTryAllSecrets, oTrustedKey, oNoExpensiveTrustChecks, oFixedListMode, oLegacyListMode, oNoSigCache, oAutoCheckTrustDB, oNoAutoCheckTrustDB, oPreservePermissions, oDefaultPreferenceList, oDefaultKeyserverURL, oPersonalCipherPreferences, oPersonalDigestPreferences, oPersonalCompressPreferences, oAgentProgram, oDirmngrProgram, oDisableDirmngr, oDisplay, oTTYname, oTTYtype, oLCctype, oLCmessages, oXauthority, oGroup, oUnGroup, oNoGroups, oStrict, oNoStrict, oMangleDosFilenames, oNoMangleDosFilenames, oEnableProgressFilter, oMultifile, oKeyidFormat, oExitOnStatusWriteError, oLimitCardInsertTries, oReaderPort, octapiDriver, opcscDriver, oDisableCCID, oRequireCrossCert, oNoRequireCrossCert, oAutoKeyLocate, oNoAutoKeyLocate, oAllowMultisigVerification, oEnableLargeRSA, oDisableLargeRSA, oEnableDSA2, oDisableDSA2, oAllowMultipleMessages, oNoAllowMultipleMessages, oAllowWeakDigestAlgos, oAllowWeakKeySignatures, oFakedSystemTime, oNoAutostart, oPrintPKARecords, oPrintDANERecords, oTOFUDefaultPolicy, oTOFUDBFormat, oDefaultNewKeyAlgo, oWeakDigest, oUnwrap, oOnlySignTextIDs, oDisableSignerUID, oSender, oKeyOrigin, oRequestOrigin, oNoSymkeyCache, oUseOnlyOpenPGPCard, oIncludeKeyBlock, oNoIncludeKeyBlock, oForceSignKey, oNoop }; static ARGPARSE_OPTS opts[] = { ARGPARSE_group (300, N_("@Commands:\n ")), ARGPARSE_c (aSign, "sign", N_("make a signature")), ARGPARSE_c (aClearsign, "clear-sign", N_("make a clear text signature")), ARGPARSE_c (aClearsign, "clearsign", "@"), ARGPARSE_c (aDetachedSign, "detach-sign", N_("make a detached signature")), ARGPARSE_c (aEncr, "encrypt", N_("encrypt data")), ARGPARSE_c (aEncrFiles, "encrypt-files", "@"), ARGPARSE_c (aSym, "symmetric", N_("encryption only with symmetric cipher")), ARGPARSE_c (aStore, "store", "@"), ARGPARSE_c (aDecrypt, "decrypt", N_("decrypt data (default)")), ARGPARSE_c (aDecryptFiles, "decrypt-files", "@"), ARGPARSE_c (aVerify, "verify" , N_("verify a signature")), ARGPARSE_c (aVerifyFiles, "verify-files" , "@" ), ARGPARSE_c (aListKeys, "list-keys", N_("list keys")), ARGPARSE_c (aListKeys, "list-public-keys", "@" ), ARGPARSE_c (aListSigs, "list-signatures", N_("list keys and signatures")), ARGPARSE_c (aListSigs, "list-sigs", "@"), ARGPARSE_c (aCheckKeys, "check-signatures", N_("list and check key signatures")), ARGPARSE_c (aCheckKeys, "check-sigs", "@"), ARGPARSE_c (oFingerprint, "fingerprint", N_("list keys and fingerprints")), ARGPARSE_c (aListSecretKeys, "list-secret-keys", N_("list secret keys")), ARGPARSE_c (aKeygen, "generate-key", N_("generate a new key pair")), ARGPARSE_c (aKeygen, "gen-key", "@"), ARGPARSE_c (aQuickKeygen, "quick-generate-key" , N_("quickly generate a new key pair")), ARGPARSE_c (aQuickKeygen, "quick-gen-key", "@"), ARGPARSE_c (aQuickAddUid, "quick-add-uid", N_("quickly add a new user-id")), ARGPARSE_c (aQuickAddUid, "quick-adduid", "@"), ARGPARSE_c (aQuickAddKey, "quick-add-key", "@"), ARGPARSE_c (aQuickAddKey, "quick-addkey", "@"), ARGPARSE_c (aQuickRevUid, "quick-revoke-uid", N_("quickly revoke a user-id")), ARGPARSE_c (aQuickRevUid, "quick-revuid", "@"), ARGPARSE_c (aQuickSetExpire, "quick-set-expire", N_("quickly set a new expiration date")), ARGPARSE_c (aQuickSetPrimaryUid, "quick-set-primary-uid", "@"), ARGPARSE_c (aFullKeygen, "full-generate-key" , N_("full featured key pair generation")), ARGPARSE_c (aFullKeygen, "full-gen-key", "@"), ARGPARSE_c (aGenRevoke, "generate-revocation", N_("generate a revocation certificate")), ARGPARSE_c (aGenRevoke, "gen-revoke", "@"), ARGPARSE_c (aDeleteKeys,"delete-keys", N_("remove keys from the public keyring")), ARGPARSE_c (aDeleteSecretKeys, "delete-secret-keys", N_("remove keys from the secret keyring")), ARGPARSE_c (aQuickSignKey, "quick-sign-key" , N_("quickly sign a key")), ARGPARSE_c (aQuickLSignKey, "quick-lsign-key", N_("quickly sign a key locally")), ARGPARSE_c (aQuickRevSig, "quick-revoke-sig" , N_("quickly revoke a key signature")), ARGPARSE_c (aSignKey, "sign-key" ,N_("sign a key")), ARGPARSE_c (aLSignKey, "lsign-key" ,N_("sign a key locally")), ARGPARSE_c (aEditKey, "edit-key" ,N_("sign or edit a key")), ARGPARSE_c (aEditKey, "key-edit" ,"@"), ARGPARSE_c (aPasswd, "change-passphrase", N_("change a passphrase")), ARGPARSE_c (aPasswd, "passwd", "@"), ARGPARSE_c (aDesigRevoke, "generate-designated-revocation", "@"), ARGPARSE_c (aDesigRevoke, "desig-revoke","@" ), ARGPARSE_c (aExport, "export" , N_("export keys") ), ARGPARSE_c (aSendKeys, "send-keys" , N_("export keys to a keyserver") ), ARGPARSE_c (aRecvKeys, "receive-keys" , N_("import keys from a keyserver") ), ARGPARSE_c (aRecvKeys, "recv-keys" , "@"), ARGPARSE_c (aSearchKeys, "search-keys" , N_("search for keys on a keyserver") ), ARGPARSE_c (aRefreshKeys, "refresh-keys", N_("update all keys from a keyserver")), ARGPARSE_c (aLocateKeys, "locate-keys", "@"), ARGPARSE_c (aLocateExtKeys, "locate-external-keys", "@"), ARGPARSE_c (aFetchKeys, "fetch-keys" , "@" ), ARGPARSE_c (aShowKeys, "show-keys" , "@" ), ARGPARSE_c (aExportSecret, "export-secret-keys" , "@" ), ARGPARSE_c (aExportSecretSub, "export-secret-subkeys" , "@" ), ARGPARSE_c (aExportSshKey, "export-ssh-key", "@" ), ARGPARSE_c (aImport, "import", N_("import/merge keys")), ARGPARSE_c (aFastImport, "fast-import", "@"), #ifdef ENABLE_CARD_SUPPORT ARGPARSE_c (aCardStatus, "card-status", N_("print the card status")), ARGPARSE_c (aCardEdit, "edit-card", N_("change data on a card")), ARGPARSE_c (aCardEdit, "card-edit", "@"), ARGPARSE_c (aChangePIN, "change-pin", N_("change a card's PIN")), #endif ARGPARSE_c (aListConfig, "list-config", "@"), ARGPARSE_c (aListGcryptConfig, "list-gcrypt-config", "@"), ARGPARSE_c (aGPGConfList, "gpgconf-list", "@" ), ARGPARSE_c (aGPGConfTest, "gpgconf-test", "@" ), ARGPARSE_c (aListPackets, "list-packets","@"), #ifndef NO_TRUST_MODELS ARGPARSE_c (aExportOwnerTrust, "export-ownertrust", "@"), ARGPARSE_c (aImportOwnerTrust, "import-ownertrust", "@"), ARGPARSE_c (aUpdateTrustDB,"update-trustdb", N_("update the trust database")), ARGPARSE_c (aCheckTrustDB, "check-trustdb", "@"), ARGPARSE_c (aFixTrustDB, "fix-trustdb", "@"), #endif ARGPARSE_c (aDeArmor, "dearmor", "@"), ARGPARSE_c (aDeArmor, "dearmour", "@"), ARGPARSE_c (aEnArmor, "enarmor", "@"), ARGPARSE_c (aEnArmor, "enarmour", "@"), ARGPARSE_c (aPrintMD, "print-md", N_("print message digests")), ARGPARSE_c (aPrimegen, "gen-prime", "@" ), ARGPARSE_c (aGenRandom,"gen-random", "@" ), ARGPARSE_c (aServer, "server", N_("run in server mode")), ARGPARSE_c (aTOFUPolicy, "tofu-policy", N_("|VALUE|set the TOFU policy for a key")), ARGPARSE_group (301, N_("@\nOptions:\n ")), ARGPARSE_s_n (oArmor, "armor", N_("create ascii armored output")), ARGPARSE_s_n (oArmor, "armour", "@"), ARGPARSE_s_s (oRecipient, "recipient", N_("|USER-ID|encrypt for USER-ID")), ARGPARSE_s_s (oHiddenRecipient, "hidden-recipient", "@"), ARGPARSE_s_s (oRecipientFile, "recipient-file", "@"), ARGPARSE_s_s (oHiddenRecipientFile, "hidden-recipient-file", "@"), ARGPARSE_s_s (oRecipient, "remote-user", "@"), /* (old option name) */ ARGPARSE_s_s (oDefRecipient, "default-recipient", "@"), ARGPARSE_s_n (oDefRecipientSelf, "default-recipient-self", "@"), ARGPARSE_s_n (oNoDefRecipient, "no-default-recipient", "@"), ARGPARSE_s_s (oTempDir, "temp-directory", "@"), ARGPARSE_s_s (oExecPath, "exec-path", "@"), ARGPARSE_s_s (oEncryptTo, "encrypt-to", "@"), ARGPARSE_s_n (oNoEncryptTo, "no-encrypt-to", "@"), ARGPARSE_s_s (oHiddenEncryptTo, "hidden-encrypt-to", "@"), ARGPARSE_s_n (oEncryptToDefaultKey, "encrypt-to-default-key", "@"), ARGPARSE_s_s (oLocalUser, "local-user", N_("|USER-ID|use USER-ID to sign or decrypt")), ARGPARSE_s_s (oSender, "sender", "@"), ARGPARSE_s_s (oTrySecretKey, "try-secret-key", "@"), ARGPARSE_s_i (oCompress, NULL, N_("|N|set compress level to N (0 disables)")), ARGPARSE_s_i (oCompressLevel, "compress-level", "@"), ARGPARSE_s_i (oBZ2CompressLevel, "bzip2-compress-level", "@"), ARGPARSE_s_n (oBZ2DecompressLowmem, "bzip2-decompress-lowmem", "@"), ARGPARSE_s_n (oMimemode, "mimemode", "@"), ARGPARSE_s_n (oTextmodeShort, NULL, "@"), ARGPARSE_s_n (oTextmode, "textmode", N_("use canonical text mode")), ARGPARSE_s_n (oNoTextmode, "no-textmode", "@"), ARGPARSE_s_n (oExpert, "expert", "@"), ARGPARSE_s_n (oNoExpert, "no-expert", "@"), ARGPARSE_s_s (oDefSigExpire, "default-sig-expire", "@"), ARGPARSE_s_n (oAskSigExpire, "ask-sig-expire", "@"), ARGPARSE_s_n (oNoAskSigExpire, "no-ask-sig-expire", "@"), ARGPARSE_s_s (oDefCertExpire, "default-cert-expire", "@"), ARGPARSE_s_n (oAskCertExpire, "ask-cert-expire", "@"), ARGPARSE_s_n (oNoAskCertExpire, "no-ask-cert-expire", "@"), ARGPARSE_s_i (oDefCertLevel, "default-cert-level", "@"), ARGPARSE_s_i (oMinCertLevel, "min-cert-level", "@"), ARGPARSE_s_n (oAskCertLevel, "ask-cert-level", "@"), ARGPARSE_s_n (oNoAskCertLevel, "no-ask-cert-level", "@"), ARGPARSE_s_s (oOutput, "output", N_("|FILE|write output to FILE")), ARGPARSE_p_u (oMaxOutput, "max-output", "@"), ARGPARSE_s_s (oInputSizeHint, "input-size-hint", "@"), ARGPARSE_s_n (oVerbose, "verbose", N_("verbose")), ARGPARSE_s_n (oQuiet, "quiet", "@"), ARGPARSE_s_n (oNoTTY, "no-tty", "@"), ARGPARSE_s_n (oDisableSignerUID, "disable-signer-uid", "@"), ARGPARSE_s_n (oDryRun, "dry-run", N_("do not make any changes")), ARGPARSE_s_n (oInteractive, "interactive", N_("prompt before overwriting")), ARGPARSE_s_n (oBatch, "batch", "@"), ARGPARSE_s_n (oAnswerYes, "yes", "@"), ARGPARSE_s_n (oAnswerNo, "no", "@"), ARGPARSE_s_s (oKeyring, "keyring", "@"), ARGPARSE_s_s (oPrimaryKeyring, "primary-keyring", "@"), ARGPARSE_s_s (oSecretKeyring, "secret-keyring", "@"), ARGPARSE_s_n (oShowKeyring, "show-keyring", "@"), ARGPARSE_s_s (oDefaultKey, "default-key", "@"), ARGPARSE_s_s (oKeyServer, "keyserver", "@"), ARGPARSE_s_s (oKeyServerOptions, "keyserver-options", "@"), ARGPARSE_s_s (oKeyOrigin, "key-origin", "@"), ARGPARSE_s_s (oImportOptions, "import-options", "@"), ARGPARSE_s_s (oImportFilter, "import-filter", "@"), ARGPARSE_s_s (oExportOptions, "export-options", "@"), ARGPARSE_s_s (oExportFilter, "export-filter", "@"), ARGPARSE_s_s (oListOptions, "list-options", "@"), ARGPARSE_s_s (oVerifyOptions, "verify-options", "@"), ARGPARSE_s_s (oDisplayCharset, "display-charset", "@"), ARGPARSE_s_s (oDisplayCharset, "charset", "@"), ARGPARSE_conffile (oOptions, "options", "@"), ARGPARSE_s_s (oDebug, "debug", "@"), ARGPARSE_s_s (oDebugLevel, "debug-level", "@"), ARGPARSE_s_n (oDebugAll, "debug-all", "@"), ARGPARSE_s_n (oDebugIOLBF, "debug-iolbf", "@"), ARGPARSE_s_i (oStatusFD, "status-fd", "@"), ARGPARSE_s_s (oStatusFile, "status-file", "@"), ARGPARSE_s_i (oAttributeFD, "attribute-fd", "@"), ARGPARSE_s_s (oAttributeFile, "attribute-file", "@"), ARGPARSE_s_i (oCompletesNeeded, "completes-needed", "@"), ARGPARSE_s_i (oMarginalsNeeded, "marginals-needed", "@"), ARGPARSE_s_i (oMaxCertDepth, "max-cert-depth", "@" ), ARGPARSE_s_s (oTrustedKey, "trusted-key", "@"), ARGPARSE_s_s (oLoadExtension, "load-extension", "@"), /* Dummy. */ ARGPARSE_s_s (oCompliance, "compliance", "@"), ARGPARSE_s_n (oGnuPG, "gnupg", "@"), ARGPARSE_s_n (oGnuPG, "no-pgp2", "@"), ARGPARSE_s_n (oGnuPG, "no-pgp6", "@"), ARGPARSE_s_n (oGnuPG, "no-pgp7", "@"), ARGPARSE_s_n (oGnuPG, "no-pgp8", "@"), ARGPARSE_s_n (oRFC2440, "rfc2440", "@"), ARGPARSE_s_n (oRFC4880, "rfc4880", "@"), ARGPARSE_s_n (oRFC4880bis, "rfc4880bis", "@"), ARGPARSE_s_n (oOpenPGP, "openpgp", N_("use strict OpenPGP behavior")), ARGPARSE_s_n (oPGP6, "pgp6", "@"), ARGPARSE_s_n (oPGP7, "pgp7", "@"), ARGPARSE_s_n (oPGP8, "pgp8", "@"), ARGPARSE_s_n (oRFC2440Text, "rfc2440-text", "@"), ARGPARSE_s_n (oNoRFC2440Text, "no-rfc2440-text", "@"), ARGPARSE_s_i (oS2KMode, "s2k-mode", "@"), ARGPARSE_s_s (oS2KDigest, "s2k-digest-algo", "@"), ARGPARSE_s_s (oS2KCipher, "s2k-cipher-algo", "@"), ARGPARSE_s_i (oS2KCount, "s2k-count", "@"), ARGPARSE_s_s (oCipherAlgo, "cipher-algo", "@"), ARGPARSE_s_s (oDigestAlgo, "digest-algo", "@"), ARGPARSE_s_s (oCertDigestAlgo, "cert-digest-algo", "@"), ARGPARSE_s_s (oCompressAlgo,"compress-algo", "@"), ARGPARSE_s_s (oCompressAlgo, "compression-algo", "@"), /* Alias */ ARGPARSE_s_n (oThrowKeyids, "throw-keyids", "@"), ARGPARSE_s_n (oNoThrowKeyids, "no-throw-keyids", "@"), ARGPARSE_s_n (oShowPhotos, "show-photos", "@"), ARGPARSE_s_n (oNoShowPhotos, "no-show-photos", "@"), ARGPARSE_s_s (oPhotoViewer, "photo-viewer", "@"), ARGPARSE_s_s (oSetNotation, "set-notation", "@"), ARGPARSE_s_s (oSigNotation, "sig-notation", "@"), ARGPARSE_s_s (oCertNotation, "cert-notation", "@"), ARGPARSE_s_s (oKnownNotation, "known-notation", "@"), ARGPARSE_group (302, N_( "@\n(See the man page for a complete listing of all commands and options)\n" )), ARGPARSE_group (303, N_("@\nExamples:\n\n" " -se -r Bob [file] sign and encrypt for user Bob\n" " --clear-sign [file] make a clear text signature\n" " --detach-sign [file] make a detached signature\n" " --list-keys [names] show keys\n" " --fingerprint [names] show fingerprints\n")), /* More hidden commands and options. */ ARGPARSE_c (aPrintMDs, "print-mds", "@"), /* old */ #ifndef NO_TRUST_MODELS ARGPARSE_c (aListTrustDB, "list-trustdb", "@"), #endif /* Not yet used: ARGPARSE_c (aListTrustPath, "list-trust-path", "@"), */ ARGPARSE_c (aDeleteSecretAndPublicKeys, "delete-secret-and-public-keys", "@"), ARGPARSE_c (aRebuildKeydbCaches, "rebuild-keydb-caches", "@"), ARGPARSE_o_s (oPassphrase, "passphrase", "@"), ARGPARSE_s_i (oPassphraseFD, "passphrase-fd", "@"), ARGPARSE_s_s (oPassphraseFile, "passphrase-file", "@"), ARGPARSE_s_i (oPassphraseRepeat,"passphrase-repeat", "@"), ARGPARSE_s_s (oPinentryMode, "pinentry-mode", "@"), ARGPARSE_s_s (oRequestOrigin, "request-origin", "@"), ARGPARSE_s_i (oCommandFD, "command-fd", "@"), ARGPARSE_s_s (oCommandFile, "command-file", "@"), ARGPARSE_s_n (oQuickRandom, "debug-quick-random", "@"), ARGPARSE_s_n (oNoVerbose, "no-verbose", "@"), #ifndef NO_TRUST_MODELS ARGPARSE_s_s (oTrustDBName, "trustdb-name", "@"), ARGPARSE_s_n (oAutoCheckTrustDB, "auto-check-trustdb", "@"), ARGPARSE_s_n (oNoAutoCheckTrustDB, "no-auto-check-trustdb", "@"), ARGPARSE_s_s (oForceOwnertrust, "force-ownertrust", "@"), #endif ARGPARSE_s_n (oNoSecmemWarn, "no-secmem-warning", "@"), ARGPARSE_s_n (oRequireSecmem, "require-secmem", "@"), ARGPARSE_s_n (oNoRequireSecmem, "no-require-secmem", "@"), ARGPARSE_s_n (oNoPermissionWarn, "no-permission-warning", "@"), ARGPARSE_s_n (oNoArmor, "no-armor", "@"), ARGPARSE_s_n (oNoArmor, "no-armour", "@"), ARGPARSE_s_n (oNoDefKeyring, "no-default-keyring", "@"), ARGPARSE_s_n (oNoKeyring, "no-keyring", "@"), ARGPARSE_s_n (oNoGreeting, "no-greeting", "@"), ARGPARSE_noconffile (oNoOptions, "no-options", "@"), ARGPARSE_s_s (oHomedir, "homedir", "@"), ARGPARSE_s_n (oNoBatch, "no-batch", "@"), ARGPARSE_s_n (oWithColons, "with-colons", "@"), ARGPARSE_s_n (oWithTofuInfo,"with-tofu-info", "@"), ARGPARSE_s_n (oWithKeyData,"with-key-data", "@"), ARGPARSE_s_n (oWithSigList,"with-sig-list", "@"), ARGPARSE_s_n (oWithSigCheck,"with-sig-check", "@"), ARGPARSE_c (aListKeys, "list-key", "@"), /* alias */ ARGPARSE_c (aListSigs, "list-sig", "@"), /* alias */ ARGPARSE_c (aCheckKeys, "check-sig", "@"), /* alias */ ARGPARSE_c (aShowKeys, "show-key", "@"), /* alias */ ARGPARSE_s_n (oSkipVerify, "skip-verify", "@"), ARGPARSE_s_n (oSkipHiddenRecipients, "skip-hidden-recipients", "@"), ARGPARSE_s_n (oNoSkipHiddenRecipients, "no-skip-hidden-recipients", "@"), ARGPARSE_s_i (oDefCertLevel, "default-cert-check-level", "@"), /* old */ #ifndef NO_TRUST_MODELS ARGPARSE_s_n (oAlwaysTrust, "always-trust", "@"), #endif ARGPARSE_s_s (oTrustModel, "trust-model", "@"), ARGPARSE_s_s (oTOFUDefaultPolicy, "tofu-default-policy", "@"), ARGPARSE_s_s (oSetFilename, "set-filename", "@"), ARGPARSE_s_n (oForYourEyesOnly, "for-your-eyes-only", "@"), ARGPARSE_s_n (oNoForYourEyesOnly, "no-for-your-eyes-only", "@"), ARGPARSE_s_s (oSetPolicyURL, "set-policy-url", "@"), ARGPARSE_s_s (oSigPolicyURL, "sig-policy-url", "@"), ARGPARSE_s_s (oCertPolicyURL, "cert-policy-url", "@"), ARGPARSE_s_n (oShowPolicyURL, "show-policy-url", "@"), ARGPARSE_s_n (oNoShowPolicyURL, "no-show-policy-url", "@"), ARGPARSE_s_s (oSigKeyserverURL, "sig-keyserver-url", "@"), ARGPARSE_s_n (oShowNotation, "show-notation", "@"), ARGPARSE_s_n (oNoShowNotation, "no-show-notation", "@"), ARGPARSE_s_s (oComment, "comment", "@"), ARGPARSE_s_n (oDefaultComment, "default-comment", "@"), ARGPARSE_s_n (oNoComments, "no-comments", "@"), ARGPARSE_s_n (oEmitVersion, "emit-version", "@"), ARGPARSE_s_n (oNoEmitVersion, "no-emit-version", "@"), ARGPARSE_s_n (oNoEmitVersion, "no-version", "@"), /* alias */ ARGPARSE_s_n (oNotDashEscaped, "not-dash-escaped", "@"), ARGPARSE_s_n (oEscapeFrom, "escape-from-lines", "@"), ARGPARSE_s_n (oNoEscapeFrom, "no-escape-from-lines", "@"), ARGPARSE_s_n (oLockOnce, "lock-once", "@"), ARGPARSE_s_n (oLockMultiple, "lock-multiple", "@"), ARGPARSE_s_n (oLockNever, "lock-never", "@"), ARGPARSE_s_i (oLoggerFD, "logger-fd", "@"), ARGPARSE_s_s (oLoggerFile, "log-file", "@"), ARGPARSE_s_s (oLoggerFile, "logger-file", "@"), /* 1.4 compatibility. */ ARGPARSE_s_n (oUseEmbeddedFilename, "use-embedded-filename", "@"), ARGPARSE_s_n (oNoUseEmbeddedFilename, "no-use-embedded-filename", "@"), ARGPARSE_s_n (oUtf8Strings, "utf8-strings", "@"), ARGPARSE_s_n (oNoUtf8Strings, "no-utf8-strings", "@"), ARGPARSE_s_n (oWithFingerprint, "with-fingerprint", "@"), ARGPARSE_s_n (oWithSubkeyFingerprint, "with-subkey-fingerprint", "@"), ARGPARSE_s_n (oWithSubkeyFingerprint, "with-subkey-fingerprints", "@"), ARGPARSE_s_n (oWithICAOSpelling, "with-icao-spelling", "@"), ARGPARSE_s_n (oWithKeygrip, "with-keygrip", "@"), ARGPARSE_s_n (oWithSecret, "with-secret", "@"), ARGPARSE_s_n (oWithWKDHash, "with-wkd-hash", "@"), ARGPARSE_s_n (oWithKeyOrigin, "with-key-origin", "@"), ARGPARSE_s_s (oDisableCipherAlgo, "disable-cipher-algo", "@"), ARGPARSE_s_s (oDisablePubkeyAlgo, "disable-pubkey-algo", "@"), ARGPARSE_s_n (oAllowNonSelfsignedUID, "allow-non-selfsigned-uid", "@"), ARGPARSE_s_n (oNoAllowNonSelfsignedUID, "no-allow-non-selfsigned-uid", "@"), ARGPARSE_s_n (oAllowFreeformUID, "allow-freeform-uid", "@"), ARGPARSE_s_n (oNoAllowFreeformUID, "no-allow-freeform-uid", "@"), ARGPARSE_s_n (oNoLiteral, "no-literal", "@"), ARGPARSE_p_u (oSetFilesize, "set-filesize", "@"), ARGPARSE_s_n (oFastListMode, "fast-list-mode", "@"), ARGPARSE_s_n (oFixedListMode, "fixed-list-mode", "@"), ARGPARSE_s_n (oLegacyListMode, "legacy-list-mode", "@"), ARGPARSE_s_n (oListOnly, "list-only", "@"), ARGPARSE_s_n (oPrintPKARecords, "print-pka-records", "@"), ARGPARSE_s_n (oPrintDANERecords, "print-dane-records", "@"), ARGPARSE_s_n (oIgnoreTimeConflict, "ignore-time-conflict", "@"), ARGPARSE_s_n (oIgnoreValidFrom, "ignore-valid-from", "@"), ARGPARSE_s_n (oIgnoreCrcError, "ignore-crc-error", "@"), ARGPARSE_s_n (oIgnoreMDCError, "ignore-mdc-error", "@"), ARGPARSE_s_n (oShowSessionKey, "show-session-key", "@"), ARGPARSE_s_s (oOverrideSessionKey, "override-session-key", "@"), ARGPARSE_s_i (oOverrideSessionKeyFD, "override-session-key-fd", "@"), ARGPARSE_s_n (oNoRandomSeedFile, "no-random-seed-file", "@"), ARGPARSE_s_n (oAutoKeyRetrieve, "auto-key-retrieve", "@"), ARGPARSE_s_n (oNoAutoKeyRetrieve, "no-auto-key-retrieve", "@"), ARGPARSE_s_n (oNoSigCache, "no-sig-cache", "@"), ARGPARSE_s_n (oMergeOnly, "merge-only", "@" ), ARGPARSE_s_n (oAllowSecretKeyImport, "allow-secret-key-import", "@"), ARGPARSE_s_n (oTryAllSecrets, "try-all-secrets", "@"), ARGPARSE_s_n (oEnableSpecialFilenames, "enable-special-filenames", "@"), ARGPARSE_s_n (oNoExpensiveTrustChecks, "no-expensive-trust-checks", "@"), ARGPARSE_s_n (oPreservePermissions, "preserve-permissions", "@"), ARGPARSE_s_s (oDefaultPreferenceList, "default-preference-list", "@"), ARGPARSE_s_s (oDefaultKeyserverURL, "default-keyserver-url", "@"), ARGPARSE_s_s (oPersonalCipherPreferences, "personal-cipher-preferences","@"), ARGPARSE_s_s (oPersonalDigestPreferences, "personal-digest-preferences","@"), ARGPARSE_s_s (oPersonalCompressPreferences, "personal-compress-preferences", "@"), ARGPARSE_s_s (oFakedSystemTime, "faked-system-time", "@"), ARGPARSE_s_s (oWeakDigest, "weak-digest","@"), ARGPARSE_s_n (oUnwrap, "unwrap", "@"), ARGPARSE_s_n (oOnlySignTextIDs, "only-sign-text-ids", "@"), ARGPARSE_s_n (oForceSignKey, "force-sign-key", "@"), /* Aliases. I constantly mistype these, and assume other people do as well. */ ARGPARSE_s_s (oPersonalCipherPreferences, "personal-cipher-prefs", "@"), ARGPARSE_s_s (oPersonalDigestPreferences, "personal-digest-prefs", "@"), ARGPARSE_s_s (oPersonalCompressPreferences, "personal-compress-prefs", "@"), ARGPARSE_s_s (oAgentProgram, "agent-program", "@"), ARGPARSE_s_s (oDirmngrProgram, "dirmngr-program", "@"), ARGPARSE_s_n (oDisableDirmngr, "disable-dirmngr", "@"), ARGPARSE_s_s (oDisplay, "display", "@"), ARGPARSE_s_s (oTTYname, "ttyname", "@"), ARGPARSE_s_s (oTTYtype, "ttytype", "@"), ARGPARSE_s_s (oLCctype, "lc-ctype", "@"), ARGPARSE_s_s (oLCmessages, "lc-messages","@"), ARGPARSE_s_s (oXauthority, "xauthority", "@"), ARGPARSE_s_s (oGroup, "group", "@"), ARGPARSE_s_s (oUnGroup, "ungroup", "@"), ARGPARSE_s_n (oNoGroups, "no-groups", "@"), ARGPARSE_s_n (oStrict, "strict", "@"), ARGPARSE_s_n (oNoStrict, "no-strict", "@"), ARGPARSE_s_n (oMangleDosFilenames, "mangle-dos-filenames", "@"), ARGPARSE_s_n (oNoMangleDosFilenames, "no-mangle-dos-filenames", "@"), ARGPARSE_s_n (oEnableProgressFilter, "enable-progress-filter", "@"), ARGPARSE_s_n (oMultifile, "multifile", "@"), ARGPARSE_s_s (oKeyidFormat, "keyid-format", "@"), ARGPARSE_s_n (oExitOnStatusWriteError, "exit-on-status-write-error", "@"), ARGPARSE_s_i (oLimitCardInsertTries, "limit-card-insert-tries", "@"), ARGPARSE_s_n (oAllowMultisigVerification, "allow-multisig-verification", "@"), ARGPARSE_s_n (oEnableLargeRSA, "enable-large-rsa", "@"), ARGPARSE_s_n (oDisableLargeRSA, "disable-large-rsa", "@"), ARGPARSE_s_n (oEnableDSA2, "enable-dsa2", "@"), ARGPARSE_s_n (oDisableDSA2, "disable-dsa2", "@"), ARGPARSE_s_n (oAllowMultipleMessages, "allow-multiple-messages", "@"), ARGPARSE_s_n (oNoAllowMultipleMessages, "no-allow-multiple-messages", "@"), ARGPARSE_s_n (oAllowWeakDigestAlgos, "allow-weak-digest-algos", "@"), ARGPARSE_s_s (oDefaultNewKeyAlgo, "default-new-key-algo", "@"), /* These two are aliases to help users of the PGP command line product use gpg with minimal pain. Many commands are common already as they seem to have borrowed commands from us. Now I'm returning the favor. */ ARGPARSE_s_s (oLocalUser, "sign-with", "@"), ARGPARSE_s_s (oRecipient, "user", "@"), ARGPARSE_s_n (oRequireCrossCert, "require-backsigs", "@"), ARGPARSE_s_n (oRequireCrossCert, "require-cross-certification", "@"), ARGPARSE_s_n (oNoRequireCrossCert, "no-require-backsigs", "@"), ARGPARSE_s_n (oNoRequireCrossCert, "no-require-cross-certification", "@"), /* New options. Fixme: Should go more to the top. */ ARGPARSE_s_s (oAutoKeyLocate, "auto-key-locate", "@"), ARGPARSE_s_n (oNoAutoKeyLocate, "no-auto-key-locate", "@"), ARGPARSE_s_n (oNoAutostart, "no-autostart", "@"), ARGPARSE_s_n (oNoSymkeyCache, "no-symkey-cache", "@"), ARGPARSE_s_n (oIncludeKeyBlock, "include-key-block", "@"), ARGPARSE_s_n (oNoIncludeKeyBlock, "no-include-key-block", "@"), ARGPARSE_s_n (oAutoKeyImport, "auto-key-import", "@"), ARGPARSE_s_n (oNoAutoKeyImport, "no-auto-key-import", "@"), /* Options to override new security defaults. */ ARGPARSE_s_n (oAllowWeakKeySignatures, "allow-weak-key-signatures", "@"), /* Options which can be used in special circumstances. They are not * published and we hope they are never required. */ ARGPARSE_s_n (oUseOnlyOpenPGPCard, "use-only-openpgp-card", "@"), /* Dummy options with warnings. */ ARGPARSE_s_n (oUseAgent, "use-agent", "@"), ARGPARSE_s_n (oNoUseAgent, "no-use-agent", "@"), ARGPARSE_s_s (oGpgAgentInfo, "gpg-agent-info", "@"), ARGPARSE_s_s (oReaderPort, "reader-port", "@"), ARGPARSE_s_s (octapiDriver, "ctapi-driver", "@"), ARGPARSE_s_s (opcscDriver, "pcsc-driver", "@"), ARGPARSE_s_n (oDisableCCID, "disable-ccid", "@"), ARGPARSE_s_n (oHonorHttpProxy, "honor-http-proxy", "@"), ARGPARSE_s_s (oTOFUDBFormat, "tofu-db-format", "@"), /* Dummy options. */ ARGPARSE_s_n (oNoop, "sk-comments", "@"), ARGPARSE_s_n (oNoop, "no-sk-comments", "@"), ARGPARSE_s_n (oNoop, "compress-keys", "@"), ARGPARSE_s_n (oNoop, "compress-sigs", "@"), ARGPARSE_s_n (oNoop, "force-v3-sigs", "@"), ARGPARSE_s_n (oNoop, "no-force-v3-sigs", "@"), ARGPARSE_s_n (oNoop, "force-v4-certs", "@"), ARGPARSE_s_n (oNoop, "no-force-v4-certs", "@"), ARGPARSE_s_n (oNoop, "no-mdc-warning", "@"), ARGPARSE_s_n (oNoop, "force-mdc", "@"), ARGPARSE_s_n (oNoop, "no-force-mdc", "@"), ARGPARSE_s_n (oNoop, "disable-mdc", "@"), ARGPARSE_s_n (oNoop, "no-disable-mdc", "@"), ARGPARSE_end () }; /* The list of supported debug flags. */ static struct debug_flags_s debug_flags [] = { { DBG_PACKET_VALUE , "packet" }, { DBG_MPI_VALUE , "mpi" }, { DBG_CRYPTO_VALUE , "crypto" }, { DBG_FILTER_VALUE , "filter" }, { DBG_IOBUF_VALUE , "iobuf" }, { DBG_MEMORY_VALUE , "memory" }, { DBG_CACHE_VALUE , "cache" }, { DBG_MEMSTAT_VALUE, "memstat" }, { DBG_TRUST_VALUE , "trust" }, { DBG_HASHING_VALUE, "hashing" }, { DBG_IPC_VALUE , "ipc" }, { DBG_CLOCK_VALUE , "clock" }, { DBG_LOOKUP_VALUE , "lookup" }, { DBG_EXTPROG_VALUE, "extprog" }, { 0, NULL } }; #ifdef ENABLE_SELINUX_HACKS #define ALWAYS_ADD_KEYRINGS 1 #else #define ALWAYS_ADD_KEYRINGS 0 #endif /* The list of the default AKL methods. */ #define DEFAULT_AKL_LIST "local,wkd" int g10_errors_seen = 0; static int utf8_strings = #ifdef HAVE_W32_SYSTEM 1 #else 0 #endif ; static int maybe_setuid = 1; static char *build_list( const char *text, char letter, const char *(*mapf)(int), int (*chkf)(int) ); static void set_cmd( enum cmd_and_opt_values *ret_cmd, enum cmd_and_opt_values new_cmd ); static void print_mds( const char *fname, int algo ); static void add_notation_data( const char *string, int which ); static void add_policy_url( const char *string, int which ); static void add_keyserver_url( const char *string, int which ); static void emergency_cleanup (void); static void read_sessionkey_from_fd (int fd); static char * make_libversion (const char *libname, const char *(*getfnc)(const char*)) { const char *s; char *result; if (maybe_setuid) { gcry_control (GCRYCTL_INIT_SECMEM, 0, 0); /* Drop setuid. */ maybe_setuid = 0; } s = getfnc (NULL); result = xmalloc (strlen (libname) + 1 + strlen (s) + 1); strcpy (stpcpy (stpcpy (result, libname), " "), s); return result; } static int build_list_pk_test_algo (int algo) { /* Show only one "RSA" string. If RSA_E or RSA_S is available RSA is also available. */ if (algo == PUBKEY_ALGO_RSA_E || algo == PUBKEY_ALGO_RSA_S) return GPG_ERR_DIGEST_ALGO; return openpgp_pk_test_algo (algo); } static const char * build_list_pk_algo_name (int algo) { return openpgp_pk_algo_name (algo); } static int build_list_cipher_test_algo (int algo) { return openpgp_cipher_test_algo (algo); } static const char * build_list_cipher_algo_name (int algo) { return openpgp_cipher_algo_name (algo); } static int build_list_md_test_algo (int algo) { /* By default we do not accept MD5 based signatures. To avoid confusion we do not announce support for it either. */ if (algo == DIGEST_ALGO_MD5) return GPG_ERR_DIGEST_ALGO; return openpgp_md_test_algo (algo); } static const char * build_list_md_algo_name (int algo) { return openpgp_md_algo_name (algo); } static const char * my_strusage( int level ) { static char *digests, *pubkeys, *ciphers, *zips, *ver_gcry; const char *p; switch (level) { case 9: p = "GPL-3.0-or-later"; break; case 11: p = "@GPG@ (@GNUPG@)"; break; case 13: p = VERSION; break; case 14: p = GNUPG_DEF_COPYRIGHT_LINE; break; case 17: p = PRINTABLE_OS_NAME; break; case 19: p = _("Please report bugs to <@EMAIL@>.\n"); break; case 20: if (!ver_gcry) ver_gcry = make_libversion ("libgcrypt", gcry_check_version); p = ver_gcry; break; #ifdef IS_DEVELOPMENT_VERSION case 25: p="NOTE: THIS IS A DEVELOPMENT VERSION!"; break; case 26: p="It is only intended for test purposes and should NOT be"; break; case 27: p="used in a production environment or with production keys!"; break; #endif case 1: case 40: p = _("Usage: @GPG@ [options] [files] (-h for help)"); break; case 41: p = _("Syntax: @GPG@ [options] [files]\n" "Sign, check, encrypt or decrypt\n" "Default operation depends on the input data\n"); break; case 31: p = "\nHome: "; break; #ifndef __riscos__ case 32: p = gnupg_homedir (); break; #else /* __riscos__ */ case 32: p = make_filename(gnupg_homedir (), NULL); break; #endif /* __riscos__ */ case 33: p = _("\nSupported algorithms:\n"); break; case 34: if (!pubkeys) pubkeys = build_list (_("Pubkey: "), 1, build_list_pk_algo_name, build_list_pk_test_algo ); p = pubkeys; break; case 35: if( !ciphers ) ciphers = build_list(_("Cipher: "), 'S', build_list_cipher_algo_name, build_list_cipher_test_algo ); p = ciphers; break; case 36: if( !digests ) digests = build_list(_("Hash: "), 'H', build_list_md_algo_name, build_list_md_test_algo ); p = digests; break; case 37: if( !zips ) zips = build_list(_("Compression: "),'Z', compress_algo_to_string, check_compress_algo); p = zips; break; case 95: p = "1"; /* <-- Enable globbing under Windows (see init.c) */ break; default: p = NULL; } return p; } static char * build_list (const char *text, char letter, const char * (*mapf)(int), int (*chkf)(int)) { membuf_t mb; int indent; int i, j, len; const char *s; char *string; if (maybe_setuid) gcry_control (GCRYCTL_INIT_SECMEM, 0, 0); /* Drop setuid. */ indent = utf8_charcount (text, -1); len = 0; init_membuf (&mb, 512); for (i=0; i <= 110; i++ ) { if (!chkf (i) && (s = mapf (i))) { if (mb.len - len > 60) { put_membuf_str (&mb, ",\n"); len = mb.len; for (j=0; j < indent; j++) put_membuf_str (&mb, " "); } else if (mb.len) put_membuf_str (&mb, ", "); else put_membuf_str (&mb, text); put_membuf_str (&mb, s); if (opt.verbose && letter) { char num[20]; if (letter == 1) snprintf (num, sizeof num, " (%d)", i); else snprintf (num, sizeof num, " (%c%d)", letter, i); put_membuf_str (&mb, num); } } } if (mb.len) put_membuf_str (&mb, "\n"); put_membuf (&mb, "", 1); string = get_membuf (&mb, NULL); return xrealloc (string, strlen (string)+1); } static void wrong_args( const char *text) { es_fprintf (es_stderr, _("usage: %s [options] %s\n"), GPG_NAME, text); log_inc_errorcount (); g10_exit(2); } static char * make_username( const char *string ) { char *p; if( utf8_strings ) p = xstrdup(string); else p = native_to_utf8( string ); return p; } static void set_opt_session_env (const char *name, const char *value) { gpg_error_t err; err = session_env_setenv (opt.session_env, name, value); if (err) log_fatal ("error setting session environment: %s\n", gpg_strerror (err)); } /* Setup the debugging. With a LEVEL of NULL only the active debug flags are propagated to the subsystems. With LEVEL set, a specific set of debug flags is set; thus overriding all flags already set. */ static void set_debug (const char *level) { int numok = (level && digitp (level)); int numlvl = numok? atoi (level) : 0; if (!level) ; else if (!strcmp (level, "none") || (numok && numlvl < 1)) opt.debug = 0; else if (!strcmp (level, "basic") || (numok && numlvl <= 2)) opt.debug = DBG_MEMSTAT_VALUE; else if (!strcmp (level, "advanced") || (numok && numlvl <= 5)) opt.debug = DBG_MEMSTAT_VALUE|DBG_TRUST_VALUE|DBG_EXTPROG_VALUE; else if (!strcmp (level, "expert") || (numok && numlvl <= 8)) opt.debug = (DBG_MEMSTAT_VALUE|DBG_TRUST_VALUE|DBG_EXTPROG_VALUE |DBG_CACHE_VALUE|DBG_LOOKUP|DBG_FILTER_VALUE|DBG_PACKET_VALUE); else if (!strcmp (level, "guru") || numok) { opt.debug = ~0; /* Unless the "guru" string has been used we don't want to allow hashing debugging. The rationale is that people tend to select the highest debug value and would then clutter their disk with debug files which may reveal confidential data. */ if (numok) opt.debug &= ~(DBG_HASHING_VALUE); } else { log_error (_("invalid debug-level '%s' given\n"), level); g10_exit (2); } if ((opt.debug & DBG_MEMORY_VALUE)) memory_debug_mode = 1; if ((opt.debug & DBG_MEMSTAT_VALUE)) memory_stat_debug_mode = 1; if (DBG_MPI) gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 2); if (DBG_CRYPTO) gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 1); if ((opt.debug & DBG_IOBUF_VALUE)) iobuf_debug_mode = 1; gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose); if (opt.debug) parse_debug_flag (NULL, &opt.debug, debug_flags); } /* We set the screen dimensions for UI purposes. Do not allow screens smaller than 80x24 for the sake of simplicity. */ static void set_screen_dimensions(void) { #ifndef HAVE_W32_SYSTEM char *str; str=getenv("COLUMNS"); if(str) opt.screen_columns=atoi(str); str=getenv("LINES"); if(str) opt.screen_lines=atoi(str); #endif if(opt.screen_columns<80 || opt.screen_columns>255) opt.screen_columns=80; if(opt.screen_lines<24 || opt.screen_lines>255) opt.screen_lines=24; } /* Helper to open a file FNAME either for reading or writing to be used with --status-file etc functions. Not generally useful but it avoids the riscos specific functions and well some Windows people might like it too. Prints an error message and returns -1 on error. On success the file descriptor is returned. */ static int open_info_file (const char *fname, int for_write, int binary) { #ifdef __riscos__ return riscos_fdopenfile (fname, for_write); #elif defined (ENABLE_SELINUX_HACKS) /* We can't allow these even when testing for a secured filename because files to be secured might not yet been secured. This is similar to the option file but in that case it is unlikely that sensitive information may be retrieved by means of error messages. */ (void)fname; (void)for_write; (void)binary; return -1; #else int fd; if (binary) binary = MY_O_BINARY; /* if (is_secured_filename (fname)) */ /* { */ /* fd = -1; */ /* gpg_err_set_errno (EPERM); */ /* } */ /* else */ /* { */ do { if (for_write) fd = gnupg_open (fname, O_CREAT | O_TRUNC | O_WRONLY | binary, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); else fd = gnupg_open (fname, O_RDONLY | binary, 0); } while (fd == -1 && errno == EINTR); /* } */ if ( fd == -1) log_error ( for_write? _("can't create '%s': %s\n") : _("can't open '%s': %s\n"), fname, strerror(errno)); return fd; #endif } static void set_cmd( enum cmd_and_opt_values *ret_cmd, enum cmd_and_opt_values new_cmd ) { enum cmd_and_opt_values cmd = *ret_cmd; if( !cmd || cmd == new_cmd ) cmd = new_cmd; else if( cmd == aSign && new_cmd == aEncr ) cmd = aSignEncr; else if( cmd == aEncr && new_cmd == aSign ) cmd = aSignEncr; else if( cmd == aSign && new_cmd == aSym ) cmd = aSignSym; else if( cmd == aSym && new_cmd == aSign ) cmd = aSignSym; else if( cmd == aSym && new_cmd == aEncr ) cmd = aEncrSym; else if( cmd == aEncr && new_cmd == aSym ) cmd = aEncrSym; else if (cmd == aSignEncr && new_cmd == aSym) cmd = aSignEncrSym; else if (cmd == aSignSym && new_cmd == aEncr) cmd = aSignEncrSym; else if (cmd == aEncrSym && new_cmd == aSign) cmd = aSignEncrSym; else if( ( cmd == aSign && new_cmd == aClearsign ) || ( cmd == aClearsign && new_cmd == aSign ) ) cmd = aClearsign; else { log_error(_("conflicting commands\n")); g10_exit(2); } *ret_cmd = cmd; } static void add_group(char *string) { char *name,*value; struct groupitem *item; /* Break off the group name */ name=strsep(&string,"="); if(string==NULL) { log_error(_("no = sign found in group definition '%s'\n"),name); return; } trim_trailing_ws(name,strlen(name)); /* Does this group already exist? */ for(item=opt.grouplist;item;item=item->next) if(strcasecmp(item->name,name)==0) break; if(!item) { item=xmalloc(sizeof(struct groupitem)); item->name=name; item->next=opt.grouplist; item->values=NULL; opt.grouplist=item; } /* Break apart the values */ while ((value= strsep(&string," \t"))) { if (*value) add_to_strlist2(&item->values,value,utf8_strings); } } static void rm_group(char *name) { struct groupitem *item,*last=NULL; trim_trailing_ws(name,strlen(name)); for(item=opt.grouplist;item;last=item,item=item->next) { if(strcasecmp(item->name,name)==0) { if(last) last->next=item->next; else opt.grouplist=item->next; free_strlist(item->values); xfree(item); break; } } } /* We need to check three things. 0) The homedir. It must be x00, a directory, and owned by the user. 1) The options/gpg.conf file. Okay unless it or its containing directory is group or other writable or not owned by us. Disable exec in this case. 2) Extensions. Same as #1. Returns true if the item is unsafe. */ static int check_permissions (const char *path, int item) { #if defined(HAVE_STAT) && !defined(HAVE_DOSISH_SYSTEM) static int homedir_cache=-1; char *tmppath,*dir; struct stat statbuf,dirbuf; int homedir=0,ret=0,checkonly=0; int perm=0,own=0,enc_dir_perm=0,enc_dir_own=0; if(opt.no_perm_warn) return 0; log_assert(item==0 || item==1 || item==2); /* extensions may attach a path */ if(item==2 && path[0]!=DIRSEP_C) { if(strchr(path,DIRSEP_C)) tmppath=make_filename(path,NULL); else tmppath=make_filename(gnupg_libdir (),path,NULL); } else tmppath=xstrdup(path); /* If the item is located in the homedir, but isn't the homedir, don't continue if we already checked the homedir itself. This is to avoid user confusion with an extra options file warning which could be rectified if the homedir itself had proper permissions. */ if(item!=0 && homedir_cache>-1 && !ascii_strncasecmp (gnupg_homedir (), tmppath, strlen (gnupg_homedir ()))) { ret=homedir_cache; goto end; } /* It's okay if the file or directory doesn't exist */ if (gnupg_stat (tmppath,&statbuf)) { ret=0; goto end; } /* Now check the enclosing directory. Theoretically, we could walk this test up to the root directory /, but for the sake of sanity, I'm stopping at one level down. */ dir=make_dirname(tmppath); if (gnupg_stat (dir,&dirbuf) || !S_ISDIR (dirbuf.st_mode)) { /* Weird error */ ret=1; goto end; } xfree(dir); /* Assume failure */ ret=1; if(item==0) { /* The homedir must be x00, a directory, and owned by the user. */ if(S_ISDIR(statbuf.st_mode)) { if(statbuf.st_uid==getuid()) { if((statbuf.st_mode & (S_IRWXG|S_IRWXO))==0) ret=0; else perm=1; } else own=1; homedir_cache=ret; } } else if(item==1 || item==2) { /* The options or extension file. Okay unless it or its containing directory is group or other writable or not owned by us or root. */ if(S_ISREG(statbuf.st_mode)) { if(statbuf.st_uid==getuid() || statbuf.st_uid==0) { if((statbuf.st_mode & (S_IWGRP|S_IWOTH))==0) { /* it's not writable, so make sure the enclosing directory is also not writable */ if(dirbuf.st_uid==getuid() || dirbuf.st_uid==0) { if((dirbuf.st_mode & (S_IWGRP|S_IWOTH))==0) ret=0; else enc_dir_perm=1; } else enc_dir_own=1; } else { /* it's writable, so the enclosing directory had better not let people get to it. */ if(dirbuf.st_uid==getuid() || dirbuf.st_uid==0) { if((dirbuf.st_mode & (S_IRWXG|S_IRWXO))==0) ret=0; else perm=enc_dir_perm=1; /* unclear which one to fix! */ } else enc_dir_own=1; } } else own=1; } } else BUG(); if(!checkonly) { if(own) { if(item==0) log_info(_("WARNING: unsafe ownership on" " homedir '%s'\n"),tmppath); else if(item==1) log_info(_("WARNING: unsafe ownership on" " configuration file '%s'\n"),tmppath); else log_info(_("WARNING: unsafe ownership on" " extension '%s'\n"),tmppath); } if(perm) { if(item==0) log_info(_("WARNING: unsafe permissions on" " homedir '%s'\n"),tmppath); else if(item==1) log_info(_("WARNING: unsafe permissions on" " configuration file '%s'\n"),tmppath); else log_info(_("WARNING: unsafe permissions on" " extension '%s'\n"),tmppath); } if(enc_dir_own) { if(item==0) log_info(_("WARNING: unsafe enclosing directory ownership on" " homedir '%s'\n"),tmppath); else if(item==1) log_info(_("WARNING: unsafe enclosing directory ownership on" " configuration file '%s'\n"),tmppath); else log_info(_("WARNING: unsafe enclosing directory ownership on" " extension '%s'\n"),tmppath); } if(enc_dir_perm) { if(item==0) log_info(_("WARNING: unsafe enclosing directory permissions on" " homedir '%s'\n"),tmppath); else if(item==1) log_info(_("WARNING: unsafe enclosing directory permissions on" " configuration file '%s'\n"),tmppath); else log_info(_("WARNING: unsafe enclosing directory permissions on" " extension '%s'\n"),tmppath); } } end: xfree(tmppath); if(homedir) homedir_cache=ret; return ret; #else /*!(HAVE_STAT && !HAVE_DOSISH_SYSTEM)*/ (void)path; (void)item; return 0; #endif /*!(HAVE_STAT && !HAVE_DOSISH_SYSTEM)*/ } /* Print the OpenPGP defined algo numbers. */ static void print_algo_numbers(int (*checker)(int)) { int i,first=1; for(i=0;i<=110;i++) { if(!checker(i)) { if(first) first=0; else es_printf (";"); es_printf ("%d",i); } } } static void print_algo_names(int (*checker)(int),const char *(*mapper)(int)) { int i,first=1; for(i=0;i<=110;i++) { if(!checker(i)) { if(first) first=0; else es_printf (";"); es_printf ("%s",mapper(i)); } } } /* In the future, we can do all sorts of interesting configuration output here. For now, just give "group" as the Enigmail folks need it, and pubkey, cipher, hash, and compress as they may be useful for frontends. */ static void list_config(char *items) { int show_all = !items; char *name = NULL; const char *s; struct groupitem *giter; int first, iter; if(!opt.with_colons) return; while(show_all || (name=strsep(&items," "))) { int any=0; if(show_all || ascii_strcasecmp(name,"group")==0) { for (giter = opt.grouplist; giter; giter = giter->next) { strlist_t sl; es_fprintf (es_stdout, "cfg:group:"); es_write_sanitized (es_stdout, giter->name, strlen(giter->name), ":", NULL); es_putc (':', es_stdout); for(sl=giter->values; sl; sl=sl->next) { es_write_sanitized (es_stdout, sl->d, strlen (sl->d), ":;", NULL); if(sl->next) es_printf(";"); } es_printf("\n"); } any=1; } if(show_all || ascii_strcasecmp(name,"version")==0) { es_printf("cfg:version:"); es_write_sanitized (es_stdout, VERSION, strlen(VERSION), ":", NULL); es_printf ("\n"); any=1; } if(show_all || ascii_strcasecmp(name,"pubkey")==0) { es_printf ("cfg:pubkey:"); print_algo_numbers (build_list_pk_test_algo); es_printf ("\n"); any=1; } if(show_all || ascii_strcasecmp(name,"pubkeyname")==0) { es_printf ("cfg:pubkeyname:"); print_algo_names (build_list_pk_test_algo, build_list_pk_algo_name); es_printf ("\n"); any=1; } if(show_all || ascii_strcasecmp(name,"cipher")==0) { es_printf ("cfg:cipher:"); print_algo_numbers (build_list_cipher_test_algo); es_printf ("\n"); any=1; } if (show_all || !ascii_strcasecmp (name,"ciphername")) { es_printf ("cfg:ciphername:"); print_algo_names (build_list_cipher_test_algo, build_list_cipher_algo_name); es_printf ("\n"); any = 1; } if(show_all || ascii_strcasecmp(name,"digest")==0 || ascii_strcasecmp(name,"hash")==0) { es_printf ("cfg:digest:"); print_algo_numbers (build_list_md_test_algo); es_printf ("\n"); any=1; } if (show_all || !ascii_strcasecmp(name,"digestname") || !ascii_strcasecmp(name,"hashname")) { es_printf ("cfg:digestname:"); print_algo_names (build_list_md_test_algo, build_list_md_algo_name); es_printf ("\n"); any=1; } if(show_all || ascii_strcasecmp(name,"compress")==0) { es_printf ("cfg:compress:"); print_algo_numbers(check_compress_algo); es_printf ("\n"); any=1; } if(show_all || ascii_strcasecmp (name, "compressname") == 0) { es_printf ("cfg:compressname:"); print_algo_names (check_compress_algo, compress_algo_to_string); es_printf ("\n"); any=1; } if (show_all || !ascii_strcasecmp(name,"ccid-reader-id")) { /* We ignore this for GnuPG 1.4 backward compatibility. */ any=1; } if (show_all || !ascii_strcasecmp (name,"curve")) { es_printf ("cfg:curve:"); for (iter=0, first=1; (s = openpgp_enum_curves (&iter)); first=0) es_printf ("%s%s", first?"":";", s); es_printf ("\n"); any=1; } /* Curve OIDs are rarely useful and thus only printed if requested. */ if (name && !ascii_strcasecmp (name,"curveoid")) { es_printf ("cfg:curveoid:"); for (iter=0, first=1; (s = openpgp_enum_curves (&iter)); first = 0) { s = openpgp_curve_to_oid (s, NULL, NULL); es_printf ("%s%s", first?"":";", s? s:"[?]"); } es_printf ("\n"); any=1; } if(show_all) break; if(!any) log_error(_("unknown configuration item '%s'\n"),name); } } /* List options and default values in the GPG Conf format. This is a new tool distributed with gnupg 1.9.x but we also want some limited support in older gpg versions. The output is the name of the configuration file and a list of options available for editing by gpgconf. */ static void gpgconf_list (const char *configfile) { char *configfile_esc = percent_escape (configfile, NULL); es_printf ("%s-%s.conf:%lu:\"%s\n", GPGCONF_NAME, GPG_NAME, GC_OPT_FLAG_DEFAULT, configfile_esc ? configfile_esc : "/dev/null"); es_printf ("verbose:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("quiet:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("keyserver:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("reader-port:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("default-key:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("encrypt-to:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("try-secret-key:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("auto-key-locate:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("auto-key-import:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("include-key-block:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("auto-key-retrieve:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("log-file:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("debug-level:%lu:\"none:\n", GC_OPT_FLAG_DEFAULT); es_printf ("group:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("compliance:%lu:\"%s:\n", GC_OPT_FLAG_DEFAULT, "gnupg"); es_printf ("default-new-key-algo:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("trust-model:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("disable-dirmngr:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("max-cert-depth:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("completes-needed:%lu:\n", GC_OPT_FLAG_NONE); es_printf ("marginals-needed:%lu:\n", GC_OPT_FLAG_NONE); /* The next one is an info only item and should match the macros at the top of keygen.c */ es_printf ("default_pubkey_algo:%lu:\"%s:\n", GC_OPT_FLAG_DEFAULT, get_default_pubkey_algo ()); /* This info only mode tells whether the we are running in de-vs * compliance mode. This does not test all parameters but the basic * conditions like a proper RNG and Libgcrypt. */ es_printf ("compliance_de_vs:%lu:%d:\n", GC_OPT_FLAG_DEFAULT, opt.compliance==CO_DE_VS && gnupg_rng_is_compliant (CO_DE_VS)); xfree (configfile_esc); } static int parse_subpacket_list(char *list) { char *tok; byte subpackets[128],i; int count=0; if(!list) { /* No arguments means all subpackets */ memset(subpackets+1,1,sizeof(subpackets)-1); count=127; } else { memset(subpackets,0,sizeof(subpackets)); /* Merge with earlier copy */ if(opt.show_subpackets) { byte *in; for(in=opt.show_subpackets;*in;in++) { if(*in>127 || *in<1) BUG(); if(!subpackets[*in]) count++; subpackets[*in]=1; } } while((tok=strsep(&list," ,"))) { if(!*tok) continue; i=atoi(tok); if(i>127 || i<1) return 0; if(!subpackets[i]) count++; subpackets[i]=1; } } xfree(opt.show_subpackets); opt.show_subpackets=xmalloc(count+1); opt.show_subpackets[count--]=0; for(i=1;i<128 && count>=0;i++) if(subpackets[i]) opt.show_subpackets[count--]=i; return 1; } static int parse_list_options(char *str) { char *subpackets=""; /* something that isn't NULL */ struct parse_options lopts[]= { {"show-photos",LIST_SHOW_PHOTOS,NULL, N_("display photo IDs during key listings")}, {"show-usage",LIST_SHOW_USAGE,NULL, N_("show key usage information during key listings")}, {"show-policy-urls",LIST_SHOW_POLICY_URLS,NULL, N_("show policy URLs during signature listings")}, {"show-notations",LIST_SHOW_NOTATIONS,NULL, N_("show all notations during signature listings")}, {"show-std-notations",LIST_SHOW_STD_NOTATIONS,NULL, N_("show IETF standard notations during signature listings")}, {"show-standard-notations",LIST_SHOW_STD_NOTATIONS,NULL, NULL}, {"show-user-notations",LIST_SHOW_USER_NOTATIONS,NULL, N_("show user-supplied notations during signature listings")}, {"show-keyserver-urls",LIST_SHOW_KEYSERVER_URLS,NULL, N_("show preferred keyserver URLs during signature listings")}, {"show-uid-validity",LIST_SHOW_UID_VALIDITY,NULL, N_("show user ID validity during key listings")}, {"show-unusable-uids",LIST_SHOW_UNUSABLE_UIDS,NULL, N_("show revoked and expired user IDs in key listings")}, {"show-unusable-subkeys",LIST_SHOW_UNUSABLE_SUBKEYS,NULL, N_("show revoked and expired subkeys in key listings")}, {"show-keyring",LIST_SHOW_KEYRING,NULL, N_("show the keyring name in key listings")}, {"show-sig-expire",LIST_SHOW_SIG_EXPIRE,NULL, N_("show expiration dates during signature listings")}, {"show-sig-subpackets",LIST_SHOW_SIG_SUBPACKETS,NULL, NULL}, {"show-only-fpr-mbox",LIST_SHOW_ONLY_FPR_MBOX, NULL, NULL}, {NULL,0,NULL,NULL} }; /* C99 allows for non-constant initializers, but we'd like to compile everywhere, so fill in the show-sig-subpackets argument here. Note that if the parse_options array changes, we'll have to change the subscript here. */ lopts[13].value=&subpackets; if(parse_options(str,&opt.list_options,lopts,1)) { if(opt.list_options&LIST_SHOW_SIG_SUBPACKETS) { /* Unset so users can pass multiple lists in. */ opt.list_options&=~LIST_SHOW_SIG_SUBPACKETS; if(!parse_subpacket_list(subpackets)) return 0; } else if(subpackets==NULL && opt.show_subpackets) { /* User did 'no-show-subpackets' */ xfree(opt.show_subpackets); opt.show_subpackets=NULL; } return 1; } else return 0; } /* Collapses argc/argv into a single string that must be freed */ static char * collapse_args(int argc,char *argv[]) { char *str=NULL; int i,first=1,len=0; for(i=0;imagic = SERVER_CONTROL_MAGIC; } /* This function is called to deinitialize a control object. It is not deallocated. */ static void gpg_deinit_default_ctrl (ctrl_t ctrl) { #ifdef USE_TOFU tofu_closedbs (ctrl); #endif gpg_dirmngr_deinit_session_data (ctrl); keydb_release (ctrl->cached_getkey_kdb); } int main (int argc, char **argv) { ARGPARSE_ARGS pargs; IOBUF a; int rc=0; int orig_argc; char **orig_argv; const char *fname; char *username; int may_coredump; strlist_t sl; strlist_t remusr = NULL; strlist_t locusr = NULL; strlist_t nrings = NULL; armor_filter_context_t *afx = NULL; int detached_sig = 0; char *last_configname = NULL; const char *configname = NULL; /* NULL or points to last_configname. * NULL also indicates that we are * processing options from the cmdline. */ int debug_argparser = 0; int default_keyring = 1; int greeting = 0; int nogreeting = 0; char *logfile = NULL; int use_random_seed = 1; enum cmd_and_opt_values cmd = 0; const char *debug_level = NULL; #ifndef NO_TRUST_MODELS const char *trustdb_name = NULL; #endif /*!NO_TRUST_MODELS*/ char *def_cipher_string = NULL; char *def_digest_string = NULL; char *compress_algo_string = NULL; char *cert_digest_string = NULL; char *s2k_cipher_string = NULL; char *s2k_digest_string = NULL; char *pers_cipher_list = NULL; char *pers_digest_list = NULL; char *pers_compress_list = NULL; int eyes_only=0; int multifile=0; int pwfd = -1; int ovrseskeyfd = -1; int fpr_maybe_cmd = 0; /* --fingerprint maybe a command. */ int any_explicit_recipient = 0; int default_akl = 1; int require_secmem = 0; int got_secmem = 0; struct assuan_malloc_hooks malloc_hooks; ctrl_t ctrl; static int print_dane_records; static int print_pka_records; #ifdef __riscos__ opt.lock_once = 1; #endif /* __riscos__ */ /* Please note that we may running SUID(ROOT), so be very CAREFUL when adding any stuff between here and the call to secmem_init() somewhere after the option parsing. */ early_system_init (); gnupg_reopen_std (GPG_NAME); trap_unaligned (); gnupg_rl_initialize (); set_strusage (my_strusage); gcry_control (GCRYCTL_SUSPEND_SECMEM_WARN); log_set_prefix (GPG_NAME, GPGRT_LOG_WITH_PREFIX); /* Make sure that our subsystems are ready. */ i18n_init(); init_common_subsystems (&argc, &argv); /* Use our own logging handler for Libcgrypt. */ setup_libgcrypt_logging (); /* Put random number into secure memory */ gcry_control (GCRYCTL_USE_SECURE_RNDPOOL); may_coredump = disable_core_dumps(); gnupg_init_signals (0, emergency_cleanup); dotlock_create (NULL, 0); /* Register lock file cleanup. */ /* Tell the compliance module who we are. */ gnupg_initialize_compliance (GNUPG_MODULE_NAME_GPG); opt.autostart = 1; opt.session_env = session_env_new (); if (!opt.session_env) log_fatal ("error allocating session environment block: %s\n", strerror (errno)); opt.command_fd = -1; /* no command fd */ opt.compress_level = -1; /* defaults to standard compress level */ opt.bz2_compress_level = -1; /* defaults to standard compress level */ /* note: if you change these lines, look at oOpenPGP */ opt.def_cipher_algo = 0; opt.def_digest_algo = 0; opt.cert_digest_algo = 0; opt.compress_algo = -1; /* defaults to DEFAULT_COMPRESS_ALGO */ opt.s2k_mode = 3; /* iterated+salted */ opt.s2k_count = 0; /* Auto-calibrate when needed. */ opt.s2k_cipher_algo = DEFAULT_CIPHER_ALGO; opt.completes_needed = 1; opt.marginals_needed = 3; opt.max_cert_depth = 5; opt.escape_from = 1; opt.flags.require_cross_cert = 1; opt.import_options = IMPORT_REPAIR_KEYS; opt.export_options = EXPORT_ATTRIBUTES; opt.keyserver_options.import_options = (IMPORT_REPAIR_KEYS | IMPORT_REPAIR_PKS_SUBKEY_BUG | IMPORT_SELF_SIGS_ONLY | IMPORT_CLEAN); opt.keyserver_options.export_options = EXPORT_ATTRIBUTES; opt.keyserver_options.options = KEYSERVER_HONOR_PKA_RECORD; opt.verify_options = (LIST_SHOW_UID_VALIDITY | VERIFY_SHOW_POLICY_URLS | VERIFY_SHOW_STD_NOTATIONS | VERIFY_SHOW_KEYSERVER_URLS); opt.list_options = (LIST_SHOW_UID_VALIDITY | LIST_SHOW_USAGE); #ifdef NO_TRUST_MODELS opt.trust_model = TM_ALWAYS; #else opt.trust_model = TM_AUTO; #endif opt.tofu_default_policy = TOFU_POLICY_AUTO; opt.mangle_dos_filenames = 0; opt.min_cert_level = 2; set_screen_dimensions (); opt.keyid_format = KF_NONE; opt.def_sig_expire = "0"; opt.def_cert_expire = "0"; gnupg_set_homedir (NULL); opt.passphrase_repeat = 1; opt.emit_version = 0; opt.weak_digests = NULL; /* Check special options given on the command line. */ orig_argc = argc; orig_argv = argv; pargs.argc = &argc; pargs.argv = &argv; pargs.flags= (ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); while (gnupg_argparse (NULL, &pargs, opts)) { switch (pargs.r_opt) { case oDebug: case oDebugAll: debug_argparser++; break; case oDebugIOLBF: es_setvbuf (es_stdout, NULL, _IOLBF, 0); break; case oNoOptions: /* Set here here because the homedir would otherwise be * created before main option parsing starts. */ opt.no_homedir_creation = 1; break; case oHomedir: gnupg_set_homedir (pargs.r.ret_str); break; case oNoPermissionWarn: opt.no_perm_warn = 1; break; } } /* Reset the flags. */ pargs.flags &= ~(ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION); #ifdef HAVE_DOSISH_SYSTEM if ( strchr (gnupg_homedir (), '\\') ) { char *d, *buf = xmalloc (strlen (gnupg_homedir ())+1); const char *s; for (d=buf, s = gnupg_homedir (); *s; s++) { *d++ = *s == '\\'? '/': *s; #ifdef HAVE_W32_SYSTEM if (s[1] && IsDBCSLeadByte (*s)) *d++ = *++s; #endif } *d = 0; gnupg_set_homedir (buf); } #endif /* Initialize the secure memory. */ if (!gcry_control (GCRYCTL_INIT_SECMEM, SECMEM_BUFFER_SIZE, 0)) got_secmem = 1; #if defined(HAVE_GETUID) && defined(HAVE_GETEUID) /* There should be no way to get to this spot while still carrying setuid privs. Just in case, bomb out if we are. */ if ( getuid () != geteuid () ) BUG (); #endif maybe_setuid = 0; /* Okay, we are now working under our real uid */ /* malloc hooks go here ... */ malloc_hooks.malloc = gcry_malloc; malloc_hooks.realloc = gcry_realloc; malloc_hooks.free = gcry_free; assuan_set_malloc_hooks (&malloc_hooks); assuan_set_gpg_err_source (GPG_ERR_SOURCE_DEFAULT); setup_libassuan_logging (&opt.debug, NULL); /* Set default options which require that malloc stuff is ready. */ additional_weak_digest ("MD5"); parse_auto_key_locate (DEFAULT_AKL_LIST); argc = orig_argc; argv = orig_argv; pargs.argc = &argc; pargs.argv = &argv; /* We are re-using the struct, thus the reset flag. We OR the * flags so that the internal intialized flag won't be cleared. */ pargs.flags |= (ARGPARSE_FLAG_RESET | ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_SYS | ARGPARSE_FLAG_USER | ARGPARSE_FLAG_USERVERS); /* By this point we have a homedir, and cannot change it. */ check_permissions (gnupg_homedir (), 0); /* The configuraton directories for use by gpgrt_argparser. */ gnupg_set_confdir (GNUPG_CONFDIR_SYS, gnupg_sysconfdir ()); gnupg_set_confdir (GNUPG_CONFDIR_USER, gnupg_homedir ()); while (gnupg_argparser (&pargs, opts, GPG_NAME EXTSEP_S "conf")) { switch (pargs.r_opt) { case ARGPARSE_CONFFILE: if (debug_argparser) log_info (_("reading options from '%s'\n"), pargs.r_type? pargs.r.ret_str: "[cmdline]"); if (pargs.r_type) { xfree (last_configname); last_configname = xstrdup (pargs.r.ret_str); configname = last_configname; if (is_secured_filename (configname)) { pargs.r_opt = ARGPARSE_PERMISSION_ERROR; pargs.err = ARGPARSE_PRINT_ERROR; } else if (strncmp (configname, gnupg_sysconfdir (), strlen (gnupg_sysconfdir ()))) { /* This is not the global config file and thus we * need to check the permissions: If the file is * unsafe, then disable any external programs for * keyserver calls or photo IDs. Since the * external program to call is set in the options * file, a unsafe options file can lead to an * arbitrary program being run. */ if (check_permissions (configname, 1)) opt.exec_disable=1; } } else configname = NULL; break; /* case oOptions: * case oNoOptions: * We will never see these options here because * gpgrt_argparse handles them for us. */ case aListConfig: case aListGcryptConfig: case aGPGConfList: case aGPGConfTest: set_cmd (&cmd, pargs.r_opt); /* Do not register a keyring for these commands. */ default_keyring = -1; break; case aCheckKeys: case aListPackets: case aImport: case aFastImport: case aSendKeys: case aRecvKeys: case aSearchKeys: case aRefreshKeys: case aFetchKeys: case aExport: #ifdef ENABLE_CARD_SUPPORT case aCardStatus: case aCardEdit: case aChangePIN: #endif /* ENABLE_CARD_SUPPORT*/ case aListKeys: case aLocateKeys: case aLocateExtKeys: case aListSigs: case aExportSecret: case aExportSecretSub: case aExportSshKey: case aSym: case aClearsign: case aGenRevoke: case aDesigRevoke: case aPrimegen: case aGenRandom: case aPrintMD: case aPrintMDs: case aListTrustDB: case aCheckTrustDB: case aUpdateTrustDB: case aFixTrustDB: case aListTrustPath: case aDeArmor: case aEnArmor: case aSign: case aQuickSignKey: case aQuickLSignKey: case aQuickRevSig: case aSignKey: case aLSignKey: case aStore: case aQuickKeygen: case aQuickAddUid: case aQuickAddKey: case aQuickRevUid: case aQuickSetExpire: case aQuickSetPrimaryUid: case aExportOwnerTrust: case aImportOwnerTrust: case aRebuildKeydbCaches: set_cmd (&cmd, pargs.r_opt); break; case aKeygen: case aFullKeygen: case aEditKey: case aDeleteSecretKeys: case aDeleteSecretAndPublicKeys: case aDeleteKeys: case aPasswd: set_cmd (&cmd, pargs.r_opt); greeting=1; break; case aShowKeys: set_cmd (&cmd, pargs.r_opt); opt.import_options |= IMPORT_SHOW; opt.import_options |= IMPORT_DRY_RUN; opt.import_options &= ~IMPORT_REPAIR_KEYS; opt.list_options |= LIST_SHOW_UNUSABLE_UIDS; opt.list_options |= LIST_SHOW_UNUSABLE_SUBKEYS; opt.list_options |= LIST_SHOW_NOTATIONS; opt.list_options |= LIST_SHOW_POLICY_URLS; break; case aDetachedSign: detached_sig = 1; set_cmd( &cmd, aSign ); break; case aDecryptFiles: multifile=1; /* fall through */ case aDecrypt: set_cmd( &cmd, aDecrypt); break; case aEncrFiles: multifile=1; /* fall through */ case aEncr: set_cmd( &cmd, aEncr); break; case aVerifyFiles: multifile=1; /* fall through */ case aVerify: set_cmd( &cmd, aVerify); break; case aServer: set_cmd (&cmd, pargs.r_opt); opt.batch = 1; break; case aTOFUPolicy: set_cmd (&cmd, pargs.r_opt); break; case oArmor: opt.armor = 1; opt.no_armor=0; break; case oOutput: opt.outfile = pargs.r.ret_str; break; case oMaxOutput: opt.max_output = pargs.r.ret_ulong; break; case oInputSizeHint: opt.input_size_hint = string_to_u64 (pargs.r.ret_str); break; case oQuiet: opt.quiet = 1; break; case oNoTTY: tty_no_terminal(1); break; case oDryRun: opt.dry_run = 1; break; case oInteractive: opt.interactive = 1; break; case oVerbose: opt.verbose++; gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose); opt.list_options|=LIST_SHOW_UNUSABLE_UIDS; opt.list_options|=LIST_SHOW_UNUSABLE_SUBKEYS; break; case oBatch: opt.batch = 1; nogreeting = 1; break; case oUseAgent: /* Dummy. */ break; case oNoUseAgent: obsolete_option (configname, pargs.lineno, "no-use-agent"); break; case oGpgAgentInfo: obsolete_option (configname, pargs.lineno, "gpg-agent-info"); break; case oReaderPort: obsolete_scdaemon_option (configname, pargs.lineno, "reader-port"); break; case octapiDriver: obsolete_scdaemon_option (configname, pargs.lineno, "ctapi-driver"); break; case opcscDriver: obsolete_scdaemon_option (configname, pargs.lineno, "pcsc-driver"); break; case oDisableCCID: obsolete_scdaemon_option (configname, pargs.lineno, "disable-ccid"); break; case oHonorHttpProxy: obsolete_option (configname, pargs.lineno, "honor-http-proxy"); break; case oAnswerYes: opt.answer_yes = 1; break; case oAnswerNo: opt.answer_no = 1; break; case oForceSignKey: opt.flags.force_sign_key = 1; break; case oKeyring: append_to_strlist( &nrings, pargs.r.ret_str); break; case oPrimaryKeyring: sl = append_to_strlist (&nrings, pargs.r.ret_str); sl->flags = KEYDB_RESOURCE_FLAG_PRIMARY; break; case oShowKeyring: deprecated_warning(configname,pargs.lineno,"--show-keyring", "--list-options ","show-keyring"); opt.list_options|=LIST_SHOW_KEYRING; break; case oDebug: if (parse_debug_flag (pargs.r.ret_str, &opt.debug, debug_flags)) { pargs.r_opt = ARGPARSE_INVALID_ARG; pargs.err = ARGPARSE_PRINT_ERROR; } break; case oDebugAll: opt.debug = ~0; break; case oDebugLevel: debug_level = pargs.r.ret_str; break; case oDebugIOLBF: break; /* Already set in pre-parse step. */ case oStatusFD: set_status_fd ( translate_sys2libc_fd_int (pargs.r.ret_int, 1) ); break; case oStatusFile: set_status_fd ( open_info_file (pargs.r.ret_str, 1, 0) ); break; case oAttributeFD: set_attrib_fd ( translate_sys2libc_fd_int (pargs.r.ret_int, 1) ); break; case oAttributeFile: set_attrib_fd ( open_info_file (pargs.r.ret_str, 1, 1) ); break; case oLoggerFD: log_set_fd (translate_sys2libc_fd_int (pargs.r.ret_int, 1)); break; case oLoggerFile: logfile = pargs.r.ret_str; break; case oWithFingerprint: opt.with_fingerprint = 1; opt.fingerprint++; break; case oWithSubkeyFingerprint: opt.with_subkey_fingerprint = 1; break; case oWithICAOSpelling: opt.with_icao_spelling = 1; break; case oFingerprint: opt.fingerprint++; fpr_maybe_cmd = 1; break; case oWithKeygrip: opt.with_keygrip = 1; break; case oWithSecret: opt.with_secret = 1; break; case oWithWKDHash: opt.with_wkd_hash = 1; break; case oWithKeyOrigin: opt.with_key_origin = 1; break; case oSecretKeyring: /* Ignore this old option. */ break; case oNoArmor: opt.no_armor=1; opt.armor=0; break; case oNoDefKeyring: if (default_keyring > 0) default_keyring = 0; break; case oNoKeyring: default_keyring = -1; break; case oNoGreeting: nogreeting = 1; break; case oNoVerbose: opt.verbose = 0; gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose); opt.list_sigs=0; break; case oQuickRandom: gcry_control (GCRYCTL_ENABLE_QUICK_RANDOM, 0); break; case oEmitVersion: opt.emit_version++; break; case oNoEmitVersion: opt.emit_version=0; break; case oCompletesNeeded: opt.completes_needed = pargs.r.ret_int; break; case oMarginalsNeeded: opt.marginals_needed = pargs.r.ret_int; break; case oMaxCertDepth: opt.max_cert_depth = pargs.r.ret_int; break; #ifndef NO_TRUST_MODELS case oTrustDBName: trustdb_name = pargs.r.ret_str; break; #endif /*!NO_TRUST_MODELS*/ case oDefaultKey: sl = add_to_strlist (&opt.def_secret_key, pargs.r.ret_str); sl->flags = (pargs.r_opt << PK_LIST_SHIFT); if (configname) sl->flags |= PK_LIST_CONFIG; break; case oDefRecipient: if( *pargs.r.ret_str ) { xfree (opt.def_recipient); opt.def_recipient = make_username(pargs.r.ret_str); } break; case oDefRecipientSelf: xfree(opt.def_recipient); opt.def_recipient = NULL; opt.def_recipient_self = 1; break; case oNoDefRecipient: xfree(opt.def_recipient); opt.def_recipient = NULL; opt.def_recipient_self = 0; break; case oHomedir: break; case oNoBatch: opt.batch = 0; break; case oWithTofuInfo: opt.with_tofu_info = 1; break; case oWithKeyData: opt.with_key_data=1; /*FALLTHRU*/ case oWithColons: opt.with_colons=':'; break; case oWithSigCheck: opt.check_sigs = 1; /*FALLTHRU*/ case oWithSigList: opt.list_sigs = 1; break; case oSkipVerify: opt.skip_verify=1; break; case oSkipHiddenRecipients: opt.skip_hidden_recipients = 1; break; case oNoSkipHiddenRecipients: opt.skip_hidden_recipients = 0; break; case aListSecretKeys: set_cmd( &cmd, aListSecretKeys); break; #ifndef NO_TRUST_MODELS /* There are many programs (like mutt) that call gpg with --always-trust so keep this option around for a long time. */ case oAlwaysTrust: opt.trust_model=TM_ALWAYS; break; case oTrustModel: parse_trust_model(pargs.r.ret_str); break; #endif /*!NO_TRUST_MODELS*/ case oTOFUDefaultPolicy: opt.tofu_default_policy = parse_tofu_policy (pargs.r.ret_str); break; case oTOFUDBFormat: obsolete_option (configname, pargs.lineno, "tofu-db-format"); break; case oForceOwnertrust: log_info(_("Note: %s is not for normal use!\n"), "--force-ownertrust"); opt.force_ownertrust=string_to_trust_value(pargs.r.ret_str); if(opt.force_ownertrust==-1) { log_error("invalid ownertrust '%s'\n",pargs.r.ret_str); opt.force_ownertrust=0; } break; case oLoadExtension: /* Dummy so that gpg 1.4 conf files can work. Should eventually be removed. */ break; case oCompliance: { int compliance = gnupg_parse_compliance_option (pargs.r.ret_str, compliance_options, DIM (compliance_options), opt.quiet); if (compliance < 0) g10_exit (1); set_compliance_option (compliance); } break; case oOpenPGP: case oRFC2440: case oRFC4880: case oRFC4880bis: case oPGP6: case oPGP7: case oPGP8: case oGnuPG: set_compliance_option (pargs.r_opt); break; case oRFC2440Text: opt.rfc2440_text=1; break; case oNoRFC2440Text: opt.rfc2440_text=0; break; case oSetFilename: if(utf8_strings) opt.set_filename = pargs.r.ret_str; else opt.set_filename = native_to_utf8(pargs.r.ret_str); break; case oForYourEyesOnly: eyes_only = 1; break; case oNoForYourEyesOnly: eyes_only = 0; break; case oSetPolicyURL: add_policy_url(pargs.r.ret_str,0); add_policy_url(pargs.r.ret_str,1); break; case oSigPolicyURL: add_policy_url(pargs.r.ret_str,0); break; case oCertPolicyURL: add_policy_url(pargs.r.ret_str,1); break; case oShowPolicyURL: deprecated_warning(configname,pargs.lineno,"--show-policy-url", "--list-options ","show-policy-urls"); deprecated_warning(configname,pargs.lineno,"--show-policy-url", "--verify-options ","show-policy-urls"); opt.list_options|=LIST_SHOW_POLICY_URLS; opt.verify_options|=VERIFY_SHOW_POLICY_URLS; break; case oNoShowPolicyURL: deprecated_warning(configname,pargs.lineno,"--no-show-policy-url", "--list-options ","no-show-policy-urls"); deprecated_warning(configname,pargs.lineno,"--no-show-policy-url", "--verify-options ","no-show-policy-urls"); opt.list_options&=~LIST_SHOW_POLICY_URLS; opt.verify_options&=~VERIFY_SHOW_POLICY_URLS; break; case oSigKeyserverURL: add_keyserver_url(pargs.r.ret_str,0); break; case oUseEmbeddedFilename: opt.flags.use_embedded_filename=1; break; case oNoUseEmbeddedFilename: opt.flags.use_embedded_filename=0; break; case oComment: if(pargs.r.ret_str[0]) append_to_strlist(&opt.comments,pargs.r.ret_str); break; case oDefaultComment: deprecated_warning(configname,pargs.lineno, "--default-comment","--no-comments",""); /* fall through */ case oNoComments: free_strlist(opt.comments); opt.comments=NULL; break; case oThrowKeyids: opt.throw_keyids = 1; break; case oNoThrowKeyids: opt.throw_keyids = 0; break; case oShowPhotos: deprecated_warning(configname,pargs.lineno,"--show-photos", "--list-options ","show-photos"); deprecated_warning(configname,pargs.lineno,"--show-photos", "--verify-options ","show-photos"); opt.list_options|=LIST_SHOW_PHOTOS; opt.verify_options|=VERIFY_SHOW_PHOTOS; break; case oNoShowPhotos: deprecated_warning(configname,pargs.lineno,"--no-show-photos", "--list-options ","no-show-photos"); deprecated_warning(configname,pargs.lineno,"--no-show-photos", "--verify-options ","no-show-photos"); opt.list_options&=~LIST_SHOW_PHOTOS; opt.verify_options&=~VERIFY_SHOW_PHOTOS; break; case oPhotoViewer: opt.photo_viewer = pargs.r.ret_str; break; case oDisableSignerUID: opt.flags.disable_signer_uid = 1; break; case oIncludeKeyBlock: opt.flags.include_key_block = 1; break; case oNoIncludeKeyBlock: opt.flags.include_key_block = 0; break; case oS2KMode: opt.s2k_mode = pargs.r.ret_int; break; case oS2KDigest: s2k_digest_string = xstrdup(pargs.r.ret_str); break; case oS2KCipher: s2k_cipher_string = xstrdup(pargs.r.ret_str); break; case oS2KCount: if (pargs.r.ret_int) opt.s2k_count = encode_s2k_iterations (pargs.r.ret_int); else opt.s2k_count = 0; /* Auto-calibrate when needed. */ break; case oRecipient: case oHiddenRecipient: case oRecipientFile: case oHiddenRecipientFile: /* Store the recipient. Note that we also store the * option as private data in the flags. This is achieved * by shifting the option value to the left so to keep * enough space for the flags. */ sl = add_to_strlist2( &remusr, pargs.r.ret_str, utf8_strings ); sl->flags = (pargs.r_opt << PK_LIST_SHIFT); if (configname) sl->flags |= PK_LIST_CONFIG; if (pargs.r_opt == oHiddenRecipient || pargs.r_opt == oHiddenRecipientFile) sl->flags |= PK_LIST_HIDDEN; if (pargs.r_opt == oRecipientFile || pargs.r_opt == oHiddenRecipientFile) sl->flags |= PK_LIST_FROM_FILE; any_explicit_recipient = 1; break; case oEncryptTo: case oHiddenEncryptTo: /* Store an additional recipient. */ sl = add_to_strlist2( &remusr, pargs.r.ret_str, utf8_strings ); sl->flags = ((pargs.r_opt << PK_LIST_SHIFT) | PK_LIST_ENCRYPT_TO); if (configname) sl->flags |= PK_LIST_CONFIG; if (pargs.r_opt == oHiddenEncryptTo) sl->flags |= PK_LIST_HIDDEN; break; case oNoEncryptTo: opt.no_encrypt_to = 1; break; case oEncryptToDefaultKey: opt.encrypt_to_default_key = configname ? 2 : 1; break; case oTrySecretKey: add_to_strlist2 (&opt.secret_keys_to_try, pargs.r.ret_str, utf8_strings); break; case oMimemode: opt.mimemode = opt.textmode = 1; break; case oTextmodeShort: opt.textmode = 2; break; case oTextmode: opt.textmode=1; break; case oNoTextmode: opt.textmode=opt.mimemode=0; break; case oExpert: opt.expert = 1; break; case oNoExpert: opt.expert = 0; break; case oDefSigExpire: if(*pargs.r.ret_str!='\0') { if(parse_expire_string(pargs.r.ret_str)==(u32)-1) log_error(_("'%s' is not a valid signature expiration\n"), pargs.r.ret_str); else opt.def_sig_expire=pargs.r.ret_str; } break; case oAskSigExpire: opt.ask_sig_expire = 1; break; case oNoAskSigExpire: opt.ask_sig_expire = 0; break; case oDefCertExpire: if(*pargs.r.ret_str!='\0') { if(parse_expire_string(pargs.r.ret_str)==(u32)-1) log_error(_("'%s' is not a valid signature expiration\n"), pargs.r.ret_str); else opt.def_cert_expire=pargs.r.ret_str; } break; case oAskCertExpire: opt.ask_cert_expire = 1; break; case oNoAskCertExpire: opt.ask_cert_expire = 0; break; case oDefCertLevel: opt.def_cert_level=pargs.r.ret_int; break; case oMinCertLevel: opt.min_cert_level=pargs.r.ret_int; break; case oAskCertLevel: opt.ask_cert_level = 1; break; case oNoAskCertLevel: opt.ask_cert_level = 0; break; case oLocalUser: /* store the local users */ sl = add_to_strlist2( &locusr, pargs.r.ret_str, utf8_strings ); sl->flags = (pargs.r_opt << PK_LIST_SHIFT); if (configname) sl->flags |= PK_LIST_CONFIG; break; case oSender: { char *mbox = mailbox_from_userid (pargs.r.ret_str); if (!mbox) log_error (_("\"%s\" is not a proper mail address\n"), pargs.r.ret_str); else { add_to_strlist (&opt.sender_list, mbox); xfree (mbox); } } break; case oCompress: /* this is the -z command line option */ opt.compress_level = opt.bz2_compress_level = pargs.r.ret_int; break; case oCompressLevel: opt.compress_level = pargs.r.ret_int; break; case oBZ2CompressLevel: opt.bz2_compress_level = pargs.r.ret_int; break; case oBZ2DecompressLowmem: opt.bz2_decompress_lowmem=1; break; case oPassphrase: set_passphrase_from_string (pargs.r_type ? pargs.r.ret_str : ""); break; case oPassphraseFD: pwfd = translate_sys2libc_fd_int (pargs.r.ret_int, 0); break; case oPassphraseFile: pwfd = open_info_file (pargs.r.ret_str, 0, 1); break; case oPassphraseRepeat: opt.passphrase_repeat = pargs.r.ret_int; break; case oPinentryMode: opt.pinentry_mode = parse_pinentry_mode (pargs.r.ret_str); if (opt.pinentry_mode == -1) log_error (_("invalid pinentry mode '%s'\n"), pargs.r.ret_str); break; case oRequestOrigin: opt.request_origin = parse_request_origin (pargs.r.ret_str); if (opt.request_origin == -1) log_error (_("invalid request origin '%s'\n"), pargs.r.ret_str); break; case oCommandFD: opt.command_fd = translate_sys2libc_fd_int (pargs.r.ret_int, 0); if (! gnupg_fd_valid (opt.command_fd)) log_error ("command-fd is invalid: %s\n", strerror (errno)); break; case oCommandFile: opt.command_fd = open_info_file (pargs.r.ret_str, 0, 1); break; case oCipherAlgo: def_cipher_string = xstrdup(pargs.r.ret_str); break; case oDigestAlgo: def_digest_string = xstrdup(pargs.r.ret_str); break; case oCompressAlgo: /* If it is all digits, stick a Z in front of it for later. This is for backwards compatibility with versions that took the compress algorithm number. */ { char *pt=pargs.r.ret_str; while(*pt) { if (!isascii (*pt) || !isdigit (*pt)) break; pt++; } if(*pt=='\0') { compress_algo_string=xmalloc(strlen(pargs.r.ret_str)+2); strcpy(compress_algo_string,"Z"); strcat(compress_algo_string,pargs.r.ret_str); } else compress_algo_string = xstrdup(pargs.r.ret_str); } break; case oCertDigestAlgo: cert_digest_string = xstrdup(pargs.r.ret_str); break; case oNoSecmemWarn: gcry_control (GCRYCTL_DISABLE_SECMEM_WARN); break; case oRequireSecmem: require_secmem=1; break; case oNoRequireSecmem: require_secmem=0; break; case oNoPermissionWarn: opt.no_perm_warn=1; break; case oDisplayCharset: if( set_native_charset( pargs.r.ret_str ) ) log_error(_("'%s' is not a valid character set\n"), pargs.r.ret_str); break; case oNotDashEscaped: opt.not_dash_escaped = 1; break; case oEscapeFrom: opt.escape_from = 1; break; case oNoEscapeFrom: opt.escape_from = 0; break; case oLockOnce: opt.lock_once = 1; break; case oLockNever: dotlock_disable (); break; case oLockMultiple: #ifndef __riscos__ opt.lock_once = 0; #else /* __riscos__ */ riscos_not_implemented("lock-multiple"); #endif /* __riscos__ */ break; case oKeyServer: { keyserver_spec_t keyserver; keyserver = parse_keyserver_uri (pargs.r.ret_str, 0); if (!keyserver) log_error (_("could not parse keyserver URL\n")); else { /* We only support a single keyserver. Later ones override earlier ones. (Since we parse the config file first and then the command line arguments, the command line takes precedence.) */ if (opt.keyserver) free_keyserver_spec (opt.keyserver); opt.keyserver = keyserver; } } break; case oKeyServerOptions: if(!parse_keyserver_options(pargs.r.ret_str)) { if(configname) log_error(_("%s:%d: invalid keyserver options\n"), configname,pargs.lineno); else log_error(_("invalid keyserver options\n")); } break; case oImportOptions: if(!parse_import_options(pargs.r.ret_str,&opt.import_options,1)) { if(configname) log_error(_("%s:%d: invalid import options\n"), configname,pargs.lineno); else log_error(_("invalid import options\n")); } break; case oImportFilter: rc = parse_and_set_import_filter (pargs.r.ret_str); if (rc) log_error (_("invalid filter option: %s\n"), gpg_strerror (rc)); break; case oExportOptions: if(!parse_export_options(pargs.r.ret_str,&opt.export_options,1)) { if(configname) log_error(_("%s:%d: invalid export options\n"), configname,pargs.lineno); else log_error(_("invalid export options\n")); } break; case oExportFilter: rc = parse_and_set_export_filter (pargs.r.ret_str); if (rc) log_error (_("invalid filter option: %s\n"), gpg_strerror (rc)); break; case oListOptions: if(!parse_list_options(pargs.r.ret_str)) { if(configname) log_error(_("%s:%d: invalid list options\n"), configname,pargs.lineno); else log_error(_("invalid list options\n")); } break; case oVerifyOptions: { struct parse_options vopts[]= { {"show-photos",VERIFY_SHOW_PHOTOS,NULL, N_("display photo IDs during signature verification")}, {"show-policy-urls",VERIFY_SHOW_POLICY_URLS,NULL, N_("show policy URLs during signature verification")}, {"show-notations",VERIFY_SHOW_NOTATIONS,NULL, N_("show all notations during signature verification")}, {"show-std-notations",VERIFY_SHOW_STD_NOTATIONS,NULL, N_("show IETF standard notations during signature verification")}, {"show-standard-notations",VERIFY_SHOW_STD_NOTATIONS,NULL, NULL}, {"show-user-notations",VERIFY_SHOW_USER_NOTATIONS,NULL, N_("show user-supplied notations during signature verification")}, {"show-keyserver-urls",VERIFY_SHOW_KEYSERVER_URLS,NULL, N_("show preferred keyserver URLs during signature verification")}, {"show-uid-validity",VERIFY_SHOW_UID_VALIDITY,NULL, N_("show user ID validity during signature verification")}, {"show-unusable-uids",VERIFY_SHOW_UNUSABLE_UIDS,NULL, N_("show revoked and expired user IDs in signature verification")}, {"show-primary-uid-only",VERIFY_SHOW_PRIMARY_UID_ONLY,NULL, N_("show only the primary user ID in signature verification")}, {"pka-lookups",VERIFY_PKA_LOOKUPS,NULL, N_("validate signatures with PKA data")}, {"pka-trust-increase",VERIFY_PKA_TRUST_INCREASE,NULL, N_("elevate the trust of signatures with valid PKA data")}, {NULL,0,NULL,NULL} }; if(!parse_options(pargs.r.ret_str,&opt.verify_options,vopts,1)) { if(configname) log_error(_("%s:%d: invalid verify options\n"), configname,pargs.lineno); else log_error(_("invalid verify options\n")); } } break; case oTempDir: opt.temp_dir=pargs.r.ret_str; break; case oExecPath: if(set_exec_path(pargs.r.ret_str)) log_error(_("unable to set exec-path to %s\n"),pargs.r.ret_str); else opt.exec_path_set=1; break; case oSetNotation: add_notation_data( pargs.r.ret_str, 0 ); add_notation_data( pargs.r.ret_str, 1 ); break; case oSigNotation: add_notation_data( pargs.r.ret_str, 0 ); break; case oCertNotation: add_notation_data( pargs.r.ret_str, 1 ); break; case oKnownNotation: register_known_notation (pargs.r.ret_str); break; case oShowNotation: deprecated_warning(configname,pargs.lineno,"--show-notation", "--list-options ","show-notations"); deprecated_warning(configname,pargs.lineno,"--show-notation", "--verify-options ","show-notations"); opt.list_options|=LIST_SHOW_NOTATIONS; opt.verify_options|=VERIFY_SHOW_NOTATIONS; break; case oNoShowNotation: deprecated_warning(configname,pargs.lineno,"--no-show-notation", "--list-options ","no-show-notations"); deprecated_warning(configname,pargs.lineno,"--no-show-notation", "--verify-options ","no-show-notations"); opt.list_options&=~LIST_SHOW_NOTATIONS; opt.verify_options&=~VERIFY_SHOW_NOTATIONS; break; case oUtf8Strings: utf8_strings = 1; break; case oNoUtf8Strings: #ifdef HAVE_W32_SYSTEM utf8_strings = 0; #endif break; case oDisableCipherAlgo: { int algo = string_to_cipher_algo (pargs.r.ret_str); gcry_cipher_ctl (NULL, GCRYCTL_DISABLE_ALGO, &algo, sizeof algo); } break; case oDisablePubkeyAlgo: { int algo = gcry_pk_map_name (pargs.r.ret_str); gcry_pk_ctl (GCRYCTL_DISABLE_ALGO, &algo, sizeof algo); } break; case oNoSigCache: opt.no_sig_cache = 1; break; case oAllowNonSelfsignedUID: opt.allow_non_selfsigned_uid = 1; break; case oNoAllowNonSelfsignedUID: opt.allow_non_selfsigned_uid=0; break; case oAllowFreeformUID: opt.allow_freeform_uid = 1; break; case oNoAllowFreeformUID: opt.allow_freeform_uid = 0; break; case oNoLiteral: opt.no_literal = 1; break; case oSetFilesize: opt.set_filesize = pargs.r.ret_ulong; break; case oFastListMode: opt.fast_list_mode = 1; break; case oFixedListMode: /* Dummy */ break; case oLegacyListMode: opt.legacy_list_mode = 1; break; case oPrintPKARecords: print_pka_records = 1; break; case oPrintDANERecords: print_dane_records = 1; break; case oListOnly: opt.list_only=1; break; case oIgnoreTimeConflict: opt.ignore_time_conflict = 1; break; case oIgnoreValidFrom: opt.ignore_valid_from = 1; break; case oIgnoreCrcError: opt.ignore_crc_error = 1; break; case oIgnoreMDCError: opt.ignore_mdc_error = 1; break; case oNoRandomSeedFile: use_random_seed = 0; break; case oAutoKeyImport: opt.flags.auto_key_import = 1; break; case oNoAutoKeyImport: opt.flags.auto_key_import = 0; break; case oAutoKeyRetrieve: opt.keyserver_options.options |= KEYSERVER_AUTO_KEY_RETRIEVE; break; case oNoAutoKeyRetrieve: opt.keyserver_options.options &= ~KEYSERVER_AUTO_KEY_RETRIEVE; break; case oShowSessionKey: opt.show_session_key = 1; break; case oOverrideSessionKey: opt.override_session_key = pargs.r.ret_str; break; case oOverrideSessionKeyFD: ovrseskeyfd = translate_sys2libc_fd_int (pargs.r.ret_int, 0); break; case oMergeOnly: deprecated_warning(configname,pargs.lineno,"--merge-only", "--import-options ","merge-only"); opt.import_options|=IMPORT_MERGE_ONLY; break; case oAllowSecretKeyImport: /* obsolete */ break; case oTryAllSecrets: opt.try_all_secrets = 1; break; case oTrustedKey: register_trusted_key( pargs.r.ret_str ); break; case oEnableSpecialFilenames: enable_special_filenames (); break; case oNoExpensiveTrustChecks: opt.no_expensive_trust_checks=1; break; case oAutoCheckTrustDB: opt.no_auto_check_trustdb=0; break; case oNoAutoCheckTrustDB: opt.no_auto_check_trustdb=1; break; case oPreservePermissions: opt.preserve_permissions=1; break; case oDefaultPreferenceList: opt.def_preference_list = pargs.r.ret_str; break; case oDefaultKeyserverURL: { keyserver_spec_t keyserver; keyserver = parse_keyserver_uri (pargs.r.ret_str,1 ); if (!keyserver) log_error (_("could not parse keyserver URL\n")); else free_keyserver_spec (keyserver); opt.def_keyserver_url = pargs.r.ret_str; } break; case oPersonalCipherPreferences: pers_cipher_list=pargs.r.ret_str; break; case oPersonalDigestPreferences: pers_digest_list=pargs.r.ret_str; break; case oPersonalCompressPreferences: pers_compress_list=pargs.r.ret_str; break; case oAgentProgram: opt.agent_program = pargs.r.ret_str; break; case oDirmngrProgram: opt.dirmngr_program = pargs.r.ret_str; break; case oDisableDirmngr: opt.disable_dirmngr = 1; break; case oWeakDigest: additional_weak_digest(pargs.r.ret_str); break; case oUnwrap: opt.unwrap_encryption = 1; break; case oOnlySignTextIDs: opt.only_sign_text_ids = 1; break; case oDisplay: set_opt_session_env ("DISPLAY", pargs.r.ret_str); break; case oTTYname: set_opt_session_env ("GPG_TTY", pargs.r.ret_str); break; case oTTYtype: set_opt_session_env ("TERM", pargs.r.ret_str); break; case oXauthority: set_opt_session_env ("XAUTHORITY", pargs.r.ret_str); break; case oLCctype: opt.lc_ctype = pargs.r.ret_str; break; case oLCmessages: opt.lc_messages = pargs.r.ret_str; break; case oGroup: add_group(pargs.r.ret_str); break; case oUnGroup: rm_group(pargs.r.ret_str); break; case oNoGroups: while(opt.grouplist) { struct groupitem *iter=opt.grouplist; free_strlist(iter->values); opt.grouplist=opt.grouplist->next; xfree(iter); } break; case oStrict: case oNoStrict: /* Not used */ break; case oMangleDosFilenames: opt.mangle_dos_filenames = 1; break; case oNoMangleDosFilenames: opt.mangle_dos_filenames = 0; break; case oEnableProgressFilter: opt.enable_progress_filter = 1; break; case oMultifile: multifile=1; break; case oKeyidFormat: if(ascii_strcasecmp(pargs.r.ret_str,"short")==0) opt.keyid_format=KF_SHORT; else if(ascii_strcasecmp(pargs.r.ret_str,"long")==0) opt.keyid_format=KF_LONG; else if(ascii_strcasecmp(pargs.r.ret_str,"0xshort")==0) opt.keyid_format=KF_0xSHORT; else if(ascii_strcasecmp(pargs.r.ret_str,"0xlong")==0) opt.keyid_format=KF_0xLONG; else if(ascii_strcasecmp(pargs.r.ret_str,"none")==0) opt.keyid_format = KF_NONE; else log_error("unknown keyid-format '%s'\n",pargs.r.ret_str); break; case oExitOnStatusWriteError: opt.exit_on_status_write_error = 1; break; case oLimitCardInsertTries: opt.limit_card_insert_tries = pargs.r.ret_int; break; case oRequireCrossCert: opt.flags.require_cross_cert=1; break; case oNoRequireCrossCert: opt.flags.require_cross_cert=0; break; case oAutoKeyLocate: if (default_akl) { /* This is the first time --auto-key-locate is seen. * We need to reset the default akl. */ default_akl = 0; release_akl(); } if(!parse_auto_key_locate(pargs.r.ret_str)) { if(configname) log_error(_("%s:%d: invalid auto-key-locate list\n"), configname,pargs.lineno); else log_error(_("invalid auto-key-locate list\n")); } break; case oNoAutoKeyLocate: release_akl(); break; case oKeyOrigin: if(!parse_key_origin (pargs.r.ret_str)) log_error (_("invalid argument for option \"%.50s\"\n"), "--key-origin"); break; case oEnableLargeRSA: #if SECMEM_BUFFER_SIZE >= 65536 opt.flags.large_rsa=1; #else if (configname) log_info("%s:%d: WARNING: gpg not built with large secure " "memory buffer. Ignoring enable-large-rsa\n", configname,pargs.lineno); else log_info("WARNING: gpg not built with large secure " "memory buffer. Ignoring --enable-large-rsa\n"); #endif /* SECMEM_BUFFER_SIZE >= 65536 */ break; case oDisableLargeRSA: opt.flags.large_rsa=0; break; case oEnableDSA2: opt.flags.dsa2=1; break; case oDisableDSA2: opt.flags.dsa2=0; break; case oAllowMultisigVerification: case oAllowMultipleMessages: opt.flags.allow_multiple_messages=1; break; case oNoAllowMultipleMessages: opt.flags.allow_multiple_messages=0; break; case oAllowWeakDigestAlgos: opt.flags.allow_weak_digest_algos = 1; break; case oAllowWeakKeySignatures: opt.flags.allow_weak_key_signatures = 1; break; case oFakedSystemTime: { size_t len = strlen (pargs.r.ret_str); int freeze = 0; time_t faked_time; if (len > 0 && pargs.r.ret_str[len-1] == '!') { freeze = 1; pargs.r.ret_str[len-1] = '\0'; } faked_time = isotime2epoch (pargs.r.ret_str); if (faked_time == (time_t)(-1)) faked_time = (time_t)strtoul (pargs.r.ret_str, NULL, 10); gnupg_set_time (faked_time, freeze); } break; case oNoAutostart: opt.autostart = 0; break; case oNoSymkeyCache: opt.no_symkey_cache = 1; break; case oDefaultNewKeyAlgo: opt.def_new_key_algo = pargs.r.ret_str; break; case oUseOnlyOpenPGPCard: opt.flags.use_only_openpgp_card = 1; break; case oNoop: break; default: if (configname) pargs.err = ARGPARSE_PRINT_WARNING; else { pargs.err = ARGPARSE_PRINT_ERROR; /* The argparse fucntion calls a plain exit and thus * we need to print a status here. */ write_status_failure ("option-parser", gpg_error(GPG_ERR_GENERAL)); } break; } } gnupg_argparse (NULL, &pargs, NULL); /* Release internal state. */ if (log_get_errorcount (0)) { write_status_failure ("option-parser", gpg_error(GPG_ERR_GENERAL)); g10_exit(2); } /* The command --gpgconf-list is pretty simple and may be called directly after the option parsing. */ if (cmd == aGPGConfList) { /* Note: Here in gpg 2.2 we need to provide a proper config * file even if that file does not exist. This is because * gpgconf checks that an absolute filename is provided. */ if (!last_configname) last_configname= make_filename (gnupg_homedir (), GPG_NAME EXTSEP_S "conf", NULL); gpgconf_list (last_configname); g10_exit (0); } xfree (last_configname); last_configname = NULL; if (print_dane_records) log_error ("invalid option \"%s\"; use \"%s\" instead\n", "--print-dane-records", "--export-options export-dane"); if (print_pka_records) log_error ("invalid option \"%s\"; use \"%s\" instead\n", "--print-pks-records", "--export-options export-pka"); if (log_get_errorcount (0)) { write_status_failure ("option-checking", gpg_error(GPG_ERR_GENERAL)); g10_exit(2); } if( nogreeting ) greeting = 0; if( greeting ) { es_fprintf (es_stderr, "%s %s; %s\n", strusage(11), strusage(13), strusage(14) ); es_fprintf (es_stderr, "%s\n", strusage(15) ); } #ifdef IS_DEVELOPMENT_VERSION if (!opt.batch) { const char *s; if((s=strusage(25))) log_info("%s\n",s); if((s=strusage(26))) log_info("%s\n",s); if((s=strusage(27))) log_info("%s\n",s); } #endif /* FIXME: We should use logging to a file only in server mode; however we have not yet implemetyed that. Thus we try to get away with --batch as indication for logging to file required. */ if (logfile && opt.batch) { log_set_file (logfile); log_set_prefix (NULL, GPGRT_LOG_WITH_PREFIX | GPGRT_LOG_WITH_TIME | GPGRT_LOG_WITH_PID); } if (opt.verbose > 2) log_info ("using character set '%s'\n", get_native_charset ()); if( may_coredump && !opt.quiet ) log_info(_("WARNING: program may create a core file!\n")); if (opt.flags.rfc4880bis) log_info ("WARNING: using experimental features from RFC4880bis!\n"); else { opt.mimemode = 0; /* This will use text mode instead. */ } if (eyes_only) { if (opt.set_filename) log_info(_("WARNING: %s overrides %s\n"), "--for-your-eyes-only","--set-filename"); opt.set_filename="_CONSOLE"; } if (opt.no_literal) { log_info(_("Note: %s is not for normal use!\n"), "--no-literal"); if (opt.textmode) log_error(_("%s not allowed with %s!\n"), "--textmode", "--no-literal" ); if (opt.set_filename) log_error(_("%s makes no sense with %s!\n"), eyes_only?"--for-your-eyes-only":"--set-filename", "--no-literal" ); } if (opt.set_filesize) log_info(_("Note: %s is not for normal use!\n"), "--set-filesize"); if( opt.batch ) tty_batchmode( 1 ); if (gnupg_faked_time_p ()) { gnupg_isotime_t tbuf; log_info (_("WARNING: running with faked system time: ")); gnupg_get_isotime (tbuf); dump_isotime (tbuf); log_printf ("\n"); } /* Print a warning if an argument looks like an option. */ if (!opt.quiet && !(pargs.flags & ARGPARSE_FLAG_STOP_SEEN)) { int i; for (i=0; i < argc; i++) if (argv[i][0] == '-' && argv[i][1] == '-') log_info (_("Note: '%s' is not considered an option\n"), argv[i]); } gcry_control (GCRYCTL_RESUME_SECMEM_WARN); if(require_secmem && !got_secmem) { log_info(_("will not run with insecure memory due to %s\n"), "--require-secmem"); write_status_failure ("option-checking", gpg_error(GPG_ERR_GENERAL)); g10_exit(2); } set_debug (debug_level); if (DBG_CLOCK) log_clock ("start"); /* Do these after the switch(), so they can override settings. */ if(PGP6) { /* That does not anymore work because we have no more support for v3 signatures. */ opt.escape_from=1; opt.ask_sig_expire=0; } else if(PGP7) { /* That does not anymore work because we have no more support for v3 signatures. */ opt.escape_from=1; opt.ask_sig_expire=0; } else if(PGP8) { opt.escape_from=1; } if( def_cipher_string ) { opt.def_cipher_algo = string_to_cipher_algo (def_cipher_string); xfree(def_cipher_string); def_cipher_string = NULL; if ( openpgp_cipher_test_algo (opt.def_cipher_algo) ) log_error(_("selected cipher algorithm is invalid\n")); } if( def_digest_string ) { opt.def_digest_algo = string_to_digest_algo (def_digest_string); xfree(def_digest_string); def_digest_string = NULL; if ( openpgp_md_test_algo (opt.def_digest_algo) ) log_error(_("selected digest algorithm is invalid\n")); } if( compress_algo_string ) { opt.compress_algo = string_to_compress_algo(compress_algo_string); xfree(compress_algo_string); compress_algo_string = NULL; if( check_compress_algo(opt.compress_algo) ) log_error(_("selected compression algorithm is invalid\n")); } if( cert_digest_string ) { opt.cert_digest_algo = string_to_digest_algo (cert_digest_string); xfree(cert_digest_string); cert_digest_string = NULL; if (openpgp_md_test_algo(opt.cert_digest_algo)) log_error(_("selected certification digest algorithm is invalid\n")); } if( s2k_cipher_string ) { opt.s2k_cipher_algo = string_to_cipher_algo (s2k_cipher_string); xfree(s2k_cipher_string); s2k_cipher_string = NULL; if (openpgp_cipher_test_algo (opt.s2k_cipher_algo)) log_error(_("selected cipher algorithm is invalid\n")); } if( s2k_digest_string ) { opt.s2k_digest_algo = string_to_digest_algo (s2k_digest_string); xfree(s2k_digest_string); s2k_digest_string = NULL; if (openpgp_md_test_algo(opt.s2k_digest_algo)) log_error(_("selected digest algorithm is invalid\n")); } if( opt.completes_needed < 1 ) log_error(_("completes-needed must be greater than 0\n")); if( opt.marginals_needed < 2 ) log_error(_("marginals-needed must be greater than 1\n")); if( opt.max_cert_depth < 1 || opt.max_cert_depth > 255 ) log_error(_("max-cert-depth must be in the range from 1 to 255\n")); if(opt.def_cert_level<0 || opt.def_cert_level>3) log_error(_("invalid default-cert-level; must be 0, 1, 2, or 3\n")); if( opt.min_cert_level < 1 || opt.min_cert_level > 3 ) log_error(_("invalid min-cert-level; must be 1, 2, or 3\n")); switch( opt.s2k_mode ) { case 0: if (!opt.quiet) log_info(_("Note: simple S2K mode (0) is strongly discouraged\n")); break; case 1: case 3: break; default: log_error(_("invalid S2K mode; must be 0, 1 or 3\n")); } /* This isn't actually needed, but does serve to error out if the string is invalid. */ if(opt.def_preference_list && keygen_set_std_prefs(opt.def_preference_list,0)) log_error(_("invalid default preferences\n")); if(pers_cipher_list && keygen_set_std_prefs(pers_cipher_list,PREFTYPE_SYM)) log_error(_("invalid personal cipher preferences\n")); if(pers_digest_list && keygen_set_std_prefs(pers_digest_list,PREFTYPE_HASH)) log_error(_("invalid personal digest preferences\n")); if(pers_compress_list && keygen_set_std_prefs(pers_compress_list,PREFTYPE_ZIP)) log_error(_("invalid personal compress preferences\n")); /* We don't support all possible commands with multifile yet */ if(multifile) { char *cmdname; switch(cmd) { case aSign: cmdname="--sign"; break; case aSignEncr: cmdname="--sign --encrypt"; break; case aClearsign: cmdname="--clear-sign"; break; case aDetachedSign: cmdname="--detach-sign"; break; case aSym: cmdname="--symmetric"; break; case aEncrSym: cmdname="--symmetric --encrypt"; break; case aStore: cmdname="--store"; break; default: cmdname=NULL; break; } if(cmdname) log_error(_("%s does not yet work with %s\n"),cmdname,"--multifile"); } if( log_get_errorcount(0) ) { write_status_failure ("option-postprocessing", gpg_error(GPG_ERR_GENERAL)); g10_exit (2); } if(opt.compress_level==0) opt.compress_algo=COMPRESS_ALGO_NONE; /* Check our chosen algorithms against the list of legal algorithms. */ if(!GNUPG) { const char *badalg=NULL; preftype_t badtype=PREFTYPE_NONE; if(opt.def_cipher_algo && !algo_available(PREFTYPE_SYM,opt.def_cipher_algo,NULL)) { badalg = openpgp_cipher_algo_name (opt.def_cipher_algo); badtype = PREFTYPE_SYM; } else if(opt.def_digest_algo && !algo_available(PREFTYPE_HASH,opt.def_digest_algo,NULL)) { badalg = gcry_md_algo_name (opt.def_digest_algo); badtype = PREFTYPE_HASH; } else if(opt.cert_digest_algo && !algo_available(PREFTYPE_HASH,opt.cert_digest_algo,NULL)) { badalg = gcry_md_algo_name (opt.cert_digest_algo); badtype = PREFTYPE_HASH; } else if(opt.compress_algo!=-1 && !algo_available(PREFTYPE_ZIP,opt.compress_algo,NULL)) { badalg = compress_algo_to_string(opt.compress_algo); badtype = PREFTYPE_ZIP; } if(badalg) { switch(badtype) { case PREFTYPE_SYM: log_info (_("cipher algorithm '%s'" " may not be used in %s mode\n"), badalg, gnupg_compliance_option_string (opt.compliance)); break; case PREFTYPE_HASH: log_info (_("digest algorithm '%s'" " may not be used in %s mode\n"), badalg, gnupg_compliance_option_string (opt.compliance)); break; case PREFTYPE_ZIP: log_info (_("compression algorithm '%s'" " may not be used in %s mode\n"), badalg, gnupg_compliance_option_string (opt.compliance)); break; default: BUG(); } compliance_failure(); } } /* Check our chosen algorithms against the list of allowed * algorithms in the current compliance mode, and fail hard if it * is not. This is us being nice to the user informing her early * that the chosen algorithms are not available. We also check * and enforce this right before the actual operation. */ if (opt.def_cipher_algo && ! gnupg_cipher_is_allowed (opt.compliance, cmd == aEncr || cmd == aSignEncr || cmd == aEncrSym || cmd == aSym || cmd == aSignSym || cmd == aSignEncrSym, opt.def_cipher_algo, GCRY_CIPHER_MODE_NONE)) log_error (_("cipher algorithm '%s' may not be used in %s mode\n"), openpgp_cipher_algo_name (opt.def_cipher_algo), gnupg_compliance_option_string (opt.compliance)); if (opt.def_digest_algo && ! gnupg_digest_is_allowed (opt.compliance, cmd == aSign || cmd == aSignEncr || cmd == aSignEncrSym || cmd == aSignSym || cmd == aClearsign, opt.def_digest_algo)) log_error (_("digest algorithm '%s' may not be used in %s mode\n"), gcry_md_algo_name (opt.def_digest_algo), gnupg_compliance_option_string (opt.compliance)); /* Fail hard. */ if (log_get_errorcount (0)) { write_status_failure ("option-checking", gpg_error(GPG_ERR_GENERAL)); g10_exit (2); } /* Set the random seed file. */ if (use_random_seed) { char *p = make_filename (gnupg_homedir (), "random_seed", NULL ); gcry_control (GCRYCTL_SET_RANDOM_SEED_FILE, p); if (!gnupg_access (p, F_OK)) register_secured_file (p); xfree(p); } /* If there is no command but the --fingerprint is given, default to the --list-keys command. */ if (!cmd && fpr_maybe_cmd) { set_cmd (&cmd, aListKeys); } if( opt.verbose > 1 ) set_packet_list_mode(1); /* Add the keyrings, but not for some special commands. We always * need to add the keyrings if we are running under SELinux, this * is so that the rings are added to the list of secured files. * We do not add any keyring if --no-keyring has been used. */ if (default_keyring >= 0 && (ALWAYS_ADD_KEYRINGS || (cmd != aDeArmor && cmd != aEnArmor && cmd != aGPGConfTest))) { if (!nrings || default_keyring > 0) /* Add default ring. */ keydb_add_resource ("pubring" EXTSEP_S GPGEXT_GPG, KEYDB_RESOURCE_FLAG_DEFAULT); for (sl = nrings; sl; sl = sl->next ) keydb_add_resource (sl->d, sl->flags); } FREE_STRLIST(nrings); if (opt.pinentry_mode == PINENTRY_MODE_LOOPBACK) /* In loopback mode, never ask for the password multiple times. */ { opt.passphrase_repeat = 0; } if (cmd == aGPGConfTest) g10_exit(0); if (pwfd != -1) /* Read the passphrase now. */ read_passphrase_from_fd (pwfd); if (ovrseskeyfd != -1 ) /* Read the sessionkey now. */ read_sessionkey_from_fd (ovrseskeyfd); fname = argc? *argv : NULL; if(fname && utf8_strings) opt.flags.utf8_filename=1; ctrl = xcalloc (1, sizeof *ctrl); gpg_init_default_ctrl (ctrl); #ifndef NO_TRUST_MODELS switch (cmd) { case aPrimegen: case aPrintMD: case aPrintMDs: case aGenRandom: case aDeArmor: case aEnArmor: case aListConfig: case aListGcryptConfig: break; case aFixTrustDB: case aExportOwnerTrust: rc = setup_trustdb (0, trustdb_name); break; case aListTrustDB: rc = setup_trustdb (argc? 1:0, trustdb_name); break; case aKeygen: case aFullKeygen: case aQuickKeygen: rc = setup_trustdb (1, trustdb_name); break; default: /* If we are using TM_ALWAYS, we do not need to create the trustdb. */ rc = setup_trustdb (opt.trust_model != TM_ALWAYS, trustdb_name); break; } if (rc) log_error (_("failed to initialize the TrustDB: %s\n"), gpg_strerror (rc)); #endif /*!NO_TRUST_MODELS*/ switch (cmd) { case aStore: case aSym: case aSign: case aSignSym: case aClearsign: if (!opt.quiet && any_explicit_recipient) log_info (_("WARNING: recipients (-r) given " "without using public key encryption\n")); break; default: break; } /* Check for certain command whether we need to migrate a secring.gpg to the gpg-agent. */ switch (cmd) { case aListSecretKeys: case aSign: case aSignEncr: case aSignEncrSym: case aSignSym: case aClearsign: case aDecrypt: case aSignKey: case aLSignKey: case aEditKey: case aPasswd: case aDeleteSecretKeys: case aDeleteSecretAndPublicKeys: case aQuickKeygen: case aQuickAddUid: case aQuickAddKey: case aQuickRevUid: case aQuickSetPrimaryUid: case aFullKeygen: case aKeygen: case aImport: case aExportSecret: case aExportSecretSub: case aGenRevoke: case aDesigRevoke: case aCardEdit: case aChangePIN: migrate_secring (ctrl); break; case aListKeys: if (opt.with_secret) migrate_secring (ctrl); break; default: break; } /* The command dispatcher. */ switch( cmd ) { case aServer: gpg_server (ctrl); break; case aStore: /* only store the file */ if( argc > 1 ) wrong_args("--store [filename]"); if( (rc = encrypt_store(fname)) ) { write_status_failure ("store", rc); log_error ("storing '%s' failed: %s\n", print_fname_stdin(fname),gpg_strerror (rc) ); } break; case aSym: /* encrypt the given file only with the symmetric cipher */ if( argc > 1 ) wrong_args("--symmetric [filename]"); if( (rc = encrypt_symmetric(fname)) ) { write_status_failure ("symencrypt", rc); log_error (_("symmetric encryption of '%s' failed: %s\n"), print_fname_stdin(fname),gpg_strerror (rc) ); } break; case aEncr: /* encrypt the given file */ if(multifile) encrypt_crypt_files (ctrl, argc, argv, remusr); else { if( argc > 1 ) wrong_args("--encrypt [filename]"); if( (rc = encrypt_crypt (ctrl, -1, fname, remusr, 0, NULL, -1)) ) { write_status_failure ("encrypt", rc); log_error("%s: encryption failed: %s\n", print_fname_stdin(fname), gpg_strerror (rc) ); } } break; case aEncrSym: /* This works with PGP 8 in the sense that it acts just like a symmetric message. It doesn't work at all with 2 or 6. It might work with 7, but alas, I don't have a copy to test with right now. */ if( argc > 1 ) wrong_args("--symmetric --encrypt [filename]"); else if(opt.s2k_mode==0) log_error(_("you cannot use --symmetric --encrypt" " with --s2k-mode 0\n")); else if(PGP6 || PGP7) log_error(_("you cannot use --symmetric --encrypt" " in %s mode\n"), gnupg_compliance_option_string (opt.compliance)); else { if( (rc = encrypt_crypt (ctrl, -1, fname, remusr, 1, NULL, -1)) ) { write_status_failure ("encrypt", rc); log_error ("%s: encryption failed: %s\n", print_fname_stdin(fname), gpg_strerror (rc) ); } } break; case aSign: /* sign the given file */ sl = NULL; if( detached_sig ) { /* sign all files */ for( ; argc; argc--, argv++ ) add_to_strlist( &sl, *argv ); } else { if( argc > 1 ) wrong_args("--sign [filename]"); if( argc ) { sl = xmalloc_clear( sizeof *sl + strlen(fname)); strcpy(sl->d, fname); } } if ((rc = sign_file (ctrl, sl, detached_sig, locusr, 0, NULL, NULL))) { write_status_failure ("sign", rc); log_error ("signing failed: %s\n", gpg_strerror (rc) ); } free_strlist(sl); break; case aSignEncr: /* sign and encrypt the given file */ if( argc > 1 ) wrong_args("--sign --encrypt [filename]"); if( argc ) { sl = xmalloc_clear( sizeof *sl + strlen(fname)); strcpy(sl->d, fname); } else sl = NULL; if ((rc = sign_file (ctrl, sl, detached_sig, locusr, 1, remusr, NULL))) { write_status_failure ("sign-encrypt", rc); log_error("%s: sign+encrypt failed: %s\n", print_fname_stdin(fname), gpg_strerror (rc) ); } free_strlist(sl); break; case aSignEncrSym: /* sign and encrypt the given file */ if( argc > 1 ) wrong_args("--symmetric --sign --encrypt [filename]"); else if(opt.s2k_mode==0) log_error(_("you cannot use --symmetric --sign --encrypt" " with --s2k-mode 0\n")); else if(PGP6 || PGP7) log_error(_("you cannot use --symmetric --sign --encrypt" " in %s mode\n"), gnupg_compliance_option_string (opt.compliance)); else { if( argc ) { sl = xmalloc_clear( sizeof *sl + strlen(fname)); strcpy(sl->d, fname); } else sl = NULL; if ((rc = sign_file (ctrl, sl, detached_sig, locusr, 2, remusr, NULL))) { write_status_failure ("sign-encrypt", rc); log_error("%s: symmetric+sign+encrypt failed: %s\n", print_fname_stdin(fname), gpg_strerror (rc) ); } free_strlist(sl); } break; case aSignSym: /* sign and conventionally encrypt the given file */ if (argc > 1) wrong_args("--sign --symmetric [filename]"); rc = sign_symencrypt_file (ctrl, fname, locusr); if (rc) { write_status_failure ("sign-symencrypt", rc); log_error("%s: sign+symmetric failed: %s\n", print_fname_stdin(fname), gpg_strerror (rc) ); } break; case aClearsign: /* make a clearsig */ if( argc > 1 ) wrong_args("--clear-sign [filename]"); if( (rc = clearsign_file (ctrl, fname, locusr, NULL)) ) { write_status_failure ("sign", rc); log_error("%s: clear-sign failed: %s\n", print_fname_stdin(fname), gpg_strerror (rc) ); } break; case aVerify: if (multifile) { if ((rc = verify_files (ctrl, argc, argv))) log_error("verify files failed: %s\n", gpg_strerror (rc) ); } else { if ((rc = verify_signatures (ctrl, argc, argv))) log_error("verify signatures failed: %s\n", gpg_strerror (rc) ); } if (rc) write_status_failure ("verify", rc); break; case aDecrypt: if (multifile) decrypt_messages (ctrl, argc, argv); else { if( argc > 1 ) wrong_args("--decrypt [filename]"); if( (rc = decrypt_message (ctrl, fname) )) { write_status_failure ("decrypt", rc); log_error("decrypt_message failed: %s\n", gpg_strerror (rc) ); } } break; case aQuickSignKey: case aQuickLSignKey: { const char *fpr; if (argc < 1) wrong_args ("--quick-[l]sign-key fingerprint [userids]"); fpr = *argv++; argc--; sl = NULL; for( ; argc; argc--, argv++) append_to_strlist2 (&sl, *argv, utf8_strings); keyedit_quick_sign (ctrl, fpr, sl, locusr, (cmd == aQuickLSignKey)); free_strlist (sl); } break; case aQuickRevSig: { const char *userid, *siguserid; if (argc < 2) wrong_args ("--quick-revoke-sig USER-ID SIG-USER-ID [userids]"); userid = *argv++; argc--; siguserid = *argv++; argc--; sl = NULL; for( ; argc; argc--, argv++) append_to_strlist2 (&sl, *argv, utf8_strings); keyedit_quick_revsig (ctrl, userid, siguserid, sl); free_strlist (sl); } break; case aSignKey: if( argc != 1 ) wrong_args("--sign-key user-id"); /* fall through */ case aLSignKey: if( argc != 1 ) wrong_args("--lsign-key user-id"); /* fall through */ sl=NULL; if(cmd==aSignKey) append_to_strlist(&sl,"sign"); else if(cmd==aLSignKey) append_to_strlist(&sl,"lsign"); else BUG(); append_to_strlist( &sl, "save" ); username = make_username( fname ); keyedit_menu (ctrl, username, locusr, sl, 0, 0 ); xfree(username); free_strlist(sl); break; case aEditKey: /* Edit a key signature */ if( !argc ) wrong_args("--edit-key user-id [commands]"); username = make_username( fname ); if( argc > 1 ) { sl = NULL; for( argc--, argv++ ; argc; argc--, argv++ ) append_to_strlist( &sl, *argv ); keyedit_menu (ctrl, username, locusr, sl, 0, 1 ); free_strlist(sl); } else keyedit_menu (ctrl, username, locusr, NULL, 0, 1 ); xfree(username); break; case aPasswd: if (argc != 1) wrong_args("--change-passphrase "); else { username = make_username (fname); keyedit_passwd (ctrl, username); xfree (username); } break; case aDeleteKeys: case aDeleteSecretKeys: case aDeleteSecretAndPublicKeys: sl = NULL; /* Print a note if the user did not specify any key. */ if (!argc && !opt.quiet) log_info (_("Note: %s\n"), gpg_strerror (GPG_ERR_NO_KEY)); /* I'm adding these in reverse order as add_to_strlist2 reverses them again, and it's easier to understand in the proper order :) */ for( ; argc; argc-- ) add_to_strlist2( &sl, argv[argc-1], utf8_strings ); delete_keys (ctrl, sl, cmd==aDeleteSecretKeys, cmd==aDeleteSecretAndPublicKeys); free_strlist(sl); break; case aCheckKeys: opt.check_sigs = 1; /* fall through */ case aListSigs: opt.list_sigs = 1; /* fall through */ case aListKeys: sl = NULL; for( ; argc; argc--, argv++ ) add_to_strlist2( &sl, *argv, utf8_strings ); public_key_list (ctrl, sl, 0, 0); free_strlist(sl); break; case aListSecretKeys: sl = NULL; for( ; argc; argc--, argv++ ) add_to_strlist2( &sl, *argv, utf8_strings ); secret_key_list (ctrl, sl); free_strlist(sl); break; case aLocateKeys: case aLocateExtKeys: sl = NULL; for (; argc; argc--, argv++) add_to_strlist2( &sl, *argv, utf8_strings ); if (cmd == aLocateExtKeys && akl_empty_or_only_local ()) { /* This is a kludge to let --locate-external-keys even * work if the config file has --no-auto-key-locate. This * better matches the expectations of the user. */ release_akl (); parse_auto_key_locate (DEFAULT_AKL_LIST); } public_key_list (ctrl, sl, 1, cmd == aLocateExtKeys); free_strlist (sl); break; case aQuickKeygen: { const char *x_algo, *x_usage, *x_expire; if (argc < 1 || argc > 4) wrong_args("--quick-generate-key USER-ID [ALGO [USAGE [EXPIRE]]]"); username = make_username (fname); argv++, argc--; x_algo = ""; x_usage = ""; x_expire = ""; if (argc) { x_algo = *argv++; argc--; if (argc) { x_usage = *argv++; argc--; if (argc) { x_expire = *argv++; argc--; } } } quick_generate_keypair (ctrl, username, x_algo, x_usage, x_expire); xfree (username); } break; case aKeygen: /* generate a key */ if( opt.batch ) { if( argc > 1 ) wrong_args("--generate-key [parameterfile]"); generate_keypair (ctrl, 0, argc? *argv : NULL, NULL, 0); } else { if (opt.command_fd != -1 && argc) { if( argc > 1 ) wrong_args("--generate-key [parameterfile]"); opt.batch = 1; generate_keypair (ctrl, 0, argc? *argv : NULL, NULL, 0); } else if (argc) wrong_args ("--generate-key"); else generate_keypair (ctrl, 0, NULL, NULL, 0); } break; case aFullKeygen: /* Generate a key with all options. */ if (opt.batch) { if (argc > 1) wrong_args ("--full-generate-key [parameterfile]"); generate_keypair (ctrl, 1, argc? *argv : NULL, NULL, 0); } else { if (argc) wrong_args("--full-generate-key"); generate_keypair (ctrl, 1, NULL, NULL, 0); } break; case aQuickAddUid: { const char *uid, *newuid; if (argc != 2) wrong_args ("--quick-add-uid USER-ID NEW-USER-ID"); uid = *argv++; argc--; newuid = *argv++; argc--; keyedit_quick_adduid (ctrl, uid, newuid); } break; case aQuickAddKey: { const char *x_fpr, *x_algo, *x_usage, *x_expire; if (argc < 1 || argc > 4) wrong_args ("--quick-add-key FINGERPRINT [ALGO [USAGE [EXPIRE]]]"); x_fpr = *argv++; argc--; x_algo = ""; x_usage = ""; x_expire = ""; if (argc) { x_algo = *argv++; argc--; if (argc) { x_usage = *argv++; argc--; if (argc) { x_expire = *argv++; argc--; } } } keyedit_quick_addkey (ctrl, x_fpr, x_algo, x_usage, x_expire); } break; case aQuickRevUid: { const char *uid, *uidtorev; if (argc != 2) wrong_args ("--quick-revoke-uid USER-ID USER-ID-TO-REVOKE"); uid = *argv++; argc--; uidtorev = *argv++; argc--; keyedit_quick_revuid (ctrl, uid, uidtorev); } break; case aQuickSetExpire: { const char *x_fpr, *x_expire; if (argc < 2) wrong_args ("--quick-set-exipre FINGERPRINT EXPIRE [SUBKEY-FPRS]"); x_fpr = *argv++; argc--; x_expire = *argv++; argc--; keyedit_quick_set_expire (ctrl, x_fpr, x_expire, argv); } break; case aQuickSetPrimaryUid: { const char *uid, *primaryuid; if (argc != 2) wrong_args ("--quick-set-primary-uid USER-ID PRIMARY-USER-ID"); uid = *argv++; argc--; primaryuid = *argv++; argc--; keyedit_quick_set_primary (ctrl, uid, primaryuid); } break; case aFastImport: opt.import_options |= IMPORT_FAST; /* fall through */ case aImport: case aShowKeys: import_keys (ctrl, argc? argv:NULL, argc, NULL, opt.import_options, opt.key_origin, opt.key_origin_url); break; /* TODO: There are a number of command that use this same "make strlist, call function, report error, free strlist" pattern. Join them together here and avoid all that duplicated code. */ case aExport: case aSendKeys: case aRecvKeys: sl = NULL; for( ; argc; argc--, argv++ ) append_to_strlist2( &sl, *argv, utf8_strings ); if( cmd == aSendKeys ) rc = keyserver_export (ctrl, sl ); else if( cmd == aRecvKeys ) rc = keyserver_import (ctrl, sl ); else { export_stats_t stats = export_new_stats (); rc = export_pubkeys (ctrl, sl, opt.export_options, stats); export_print_stats (stats); export_release_stats (stats); } if(rc) { if(cmd==aSendKeys) { write_status_failure ("send-keys", rc); log_error(_("keyserver send failed: %s\n"),gpg_strerror (rc)); } else if(cmd==aRecvKeys) { write_status_failure ("recv-keys", rc); log_error (_("keyserver receive failed: %s\n"), gpg_strerror (rc)); } else { write_status_failure ("export", rc); log_error (_("key export failed: %s\n"), gpg_strerror (rc)); } } free_strlist(sl); break; case aExportSshKey: if (argc != 1) wrong_args ("--export-ssh-key "); rc = export_ssh_key (ctrl, argv[0]); if (rc) { write_status_failure ("export-ssh-key", rc); log_error (_("export as ssh key failed: %s\n"), gpg_strerror (rc)); } break; case aSearchKeys: sl = NULL; for (; argc; argc--, argv++) append_to_strlist2 (&sl, *argv, utf8_strings); rc = keyserver_search (ctrl, sl); if (rc) { write_status_failure ("search-keys", rc); log_error (_("keyserver search failed: %s\n"), gpg_strerror (rc)); } free_strlist (sl); break; case aRefreshKeys: sl = NULL; for( ; argc; argc--, argv++ ) append_to_strlist2( &sl, *argv, utf8_strings ); rc = keyserver_refresh (ctrl, sl); if(rc) { write_status_failure ("refresh-keys", rc); log_error (_("keyserver refresh failed: %s\n"),gpg_strerror (rc)); } free_strlist(sl); break; case aFetchKeys: sl = NULL; for( ; argc; argc--, argv++ ) append_to_strlist2( &sl, *argv, utf8_strings ); rc = keyserver_fetch (ctrl, sl, opt.key_origin); + free_strlist (sl); if(rc) { write_status_failure ("fetch-keys", rc); log_error ("key fetch failed: %s\n",gpg_strerror (rc)); + if (gpg_err_code (rc) == GPG_ERR_NO_DATA) + g10_exit (1); /* In this case return 1 and not 2. */ } - free_strlist(sl); break; case aExportSecret: sl = NULL; for( ; argc; argc--, argv++ ) add_to_strlist2( &sl, *argv, utf8_strings ); { export_stats_t stats = export_new_stats (); export_seckeys (ctrl, sl, opt.export_options, stats); export_print_stats (stats); export_release_stats (stats); } free_strlist(sl); break; case aExportSecretSub: sl = NULL; for( ; argc; argc--, argv++ ) add_to_strlist2( &sl, *argv, utf8_strings ); { export_stats_t stats = export_new_stats (); export_secsubkeys (ctrl, sl, opt.export_options, stats); export_print_stats (stats); export_release_stats (stats); } free_strlist(sl); break; case aGenRevoke: if( argc != 1 ) wrong_args("--generate-revocation user-id"); username = make_username(*argv); gen_revoke (ctrl, username ); xfree( username ); break; case aDesigRevoke: if (argc != 1) wrong_args ("--generate-designated-revocation user-id"); username = make_username (*argv); gen_desig_revoke (ctrl, username, locusr); xfree (username); break; case aDeArmor: if( argc > 1 ) wrong_args("--dearmor [file]"); rc = dearmor_file( argc? *argv: NULL ); if( rc ) { write_status_failure ("dearmor", rc); log_error (_("dearmoring failed: %s\n"), gpg_strerror (rc)); } break; case aEnArmor: if( argc > 1 ) wrong_args("--enarmor [file]"); rc = enarmor_file( argc? *argv: NULL ); if( rc ) { write_status_failure ("enarmor", rc); log_error (_("enarmoring failed: %s\n"), gpg_strerror (rc)); } break; case aPrimegen: #if 0 /*FIXME*/ { int mode = argc < 2 ? 0 : atoi(*argv); if( mode == 1 && argc == 2 ) { mpi_print (es_stdout, generate_public_prime( atoi(argv[1]) ), 1); } else if( mode == 2 && argc == 3 ) { mpi_print (es_stdout, generate_elg_prime( 0, atoi(argv[1]), atoi(argv[2]), NULL,NULL ), 1); } else if( mode == 3 && argc == 3 ) { MPI *factors; mpi_print (es_stdout, generate_elg_prime( 1, atoi(argv[1]), atoi(argv[2]), NULL,&factors ), 1); es_putc ('\n', es_stdout); mpi_print (es_stdout, factors[0], 1 ); /* print q */ } else if( mode == 4 && argc == 3 ) { MPI g = mpi_alloc(1); mpi_print (es_stdout, generate_elg_prime( 0, atoi(argv[1]), atoi(argv[2]), g, NULL ), 1); es_putc ('\n', es_stdout); mpi_print (es_stdout, g, 1 ); mpi_free (g); } else wrong_args("--gen-prime mode bits [qbits] "); es_putc ('\n', es_stdout); } #endif wrong_args("--gen-prime not yet supported "); break; case aGenRandom: { int level = argc ? atoi(*argv):0; int count = argc > 1 ? atoi(argv[1]): 0; int endless = !count; if( argc < 1 || argc > 2 || level < 0 || level > 2 || count < 0 ) wrong_args("--gen-random 0|1|2 [count]"); while( endless || count ) { byte *p; /* Wee need a multiple of 3, so that in case of armored output we get a correct string. No linefolding is done, as it is best to levae this to other tools */ size_t n = !endless && count < 99? count : 99; p = gcry_random_bytes (n, level); #ifdef HAVE_DOSISH_SYSTEM setmode ( fileno(stdout), O_BINARY ); #endif if (opt.armor) { char *tmp = make_radix64_string (p, n); es_fputs (tmp, es_stdout); xfree (tmp); if (n%3 == 1) es_putc ('=', es_stdout); if (n%3) es_putc ('=', es_stdout); } else { es_fwrite( p, n, 1, es_stdout ); } xfree(p); if( !endless ) count -= n; } if (opt.armor) es_putc ('\n', es_stdout); } break; case aPrintMD: if( argc < 1) wrong_args("--print-md algo [files]"); { int all_algos = (**argv=='*' && !(*argv)[1]); int algo = all_algos? 0 : gcry_md_map_name (*argv); if( !algo && !all_algos ) log_error(_("invalid hash algorithm '%s'\n"), *argv ); else { argc--; argv++; if( !argc ) print_mds(NULL, algo); else { for(; argc; argc--, argv++ ) print_mds(*argv, algo); } } } break; case aPrintMDs: /* old option */ if( !argc ) print_mds(NULL,0); else { for(; argc; argc--, argv++ ) print_mds(*argv,0); } break; #ifndef NO_TRUST_MODELS case aListTrustDB: if( !argc ) list_trustdb (ctrl, es_stdout, NULL); else { for( ; argc; argc--, argv++ ) list_trustdb (ctrl, es_stdout, *argv ); } break; case aUpdateTrustDB: if( argc ) wrong_args("--update-trustdb"); update_trustdb (ctrl); break; case aCheckTrustDB: /* Old versions allowed for arguments - ignore them */ check_trustdb (ctrl); break; case aFixTrustDB: how_to_fix_the_trustdb (); break; case aListTrustPath: if( !argc ) wrong_args("--list-trust-path "); for( ; argc; argc--, argv++ ) { username = make_username( *argv ); list_trust_path( username ); xfree(username); } break; case aExportOwnerTrust: if( argc ) wrong_args("--export-ownertrust"); export_ownertrust (ctrl); break; case aImportOwnerTrust: if( argc > 1 ) wrong_args("--import-ownertrust [file]"); import_ownertrust (ctrl, argc? *argv:NULL ); break; #endif /*!NO_TRUST_MODELS*/ case aRebuildKeydbCaches: if (argc) wrong_args ("--rebuild-keydb-caches"); keydb_rebuild_caches (ctrl, 1); break; #ifdef ENABLE_CARD_SUPPORT case aCardStatus: if (argc == 0) card_status (ctrl, es_stdout, NULL); else if (argc == 1) card_status (ctrl, es_stdout, *argv); else wrong_args ("--card-status [serialno]"); break; case aCardEdit: if (argc) { sl = NULL; for (argc--, argv++ ; argc; argc--, argv++) append_to_strlist (&sl, *argv); card_edit (ctrl, sl); free_strlist (sl); } else card_edit (ctrl, NULL); break; case aChangePIN: if (!argc) change_pin (0,1); else if (argc == 1) change_pin (atoi (*argv),1); else wrong_args ("--change-pin [no]"); break; #endif /* ENABLE_CARD_SUPPORT*/ case aListConfig: { char *str=collapse_args(argc,argv); list_config(str); xfree(str); } break; case aListGcryptConfig: /* Fixme: It would be nice to integrate that with --list-config but unfortunately there is no way yet to have libgcrypt print it to an estream for further parsing. */ gcry_control (GCRYCTL_PRINT_CONFIG, stdout); break; case aTOFUPolicy: #ifdef USE_TOFU { int policy; int i; KEYDB_HANDLE hd; if (argc < 2) wrong_args ("--tofu-policy POLICY KEYID [KEYID...]"); policy = parse_tofu_policy (argv[0]); hd = keydb_new (); if (! hd) { write_status_failure ("tofu-driver", gpg_error(GPG_ERR_GENERAL)); g10_exit (1); } tofu_begin_batch_update (ctrl); for (i = 1; i < argc; i ++) { KEYDB_SEARCH_DESC desc; kbnode_t kb; rc = classify_user_id (argv[i], &desc, 0); if (rc) { log_error (_("error parsing key specification '%s': %s\n"), argv[i], gpg_strerror (rc)); write_status_failure ("tofu-driver", rc); g10_exit (1); } if (! (desc.mode == KEYDB_SEARCH_MODE_SHORT_KID || desc.mode == KEYDB_SEARCH_MODE_LONG_KID || desc.mode == KEYDB_SEARCH_MODE_FPR16 || desc.mode == KEYDB_SEARCH_MODE_FPR20 || desc.mode == KEYDB_SEARCH_MODE_FPR || desc.mode == KEYDB_SEARCH_MODE_KEYGRIP)) { log_error (_("'%s' does not appear to be a valid" " key ID, fingerprint or keygrip\n"), argv[i]); write_status_failure ("tofu-driver", gpg_error(GPG_ERR_GENERAL)); g10_exit (1); } rc = keydb_search_reset (hd); if (rc) { /* This should not happen, thus no need to tranalate the string. */ log_error ("keydb_search_reset failed: %s\n", gpg_strerror (rc)); write_status_failure ("tofu-driver", rc); g10_exit (1); } rc = keydb_search (hd, &desc, 1, NULL); if (rc) { log_error (_("key \"%s\" not found: %s\n"), argv[i], gpg_strerror (rc)); write_status_failure ("tofu-driver", rc); g10_exit (1); } rc = keydb_get_keyblock (hd, &kb); if (rc) { log_error (_("error reading keyblock: %s\n"), gpg_strerror (rc)); write_status_failure ("tofu-driver", rc); g10_exit (1); } merge_keys_and_selfsig (ctrl, kb); if (tofu_set_policy (ctrl, kb, policy)) { write_status_failure ("tofu-driver", rc); g10_exit (1); } release_kbnode (kb); } tofu_end_batch_update (ctrl); keydb_release (hd); } #endif /*USE_TOFU*/ break; default: if (!opt.quiet) log_info (_("WARNING: no command supplied." " Trying to guess what you mean ...\n")); /*FALLTHRU*/ case aListPackets: if( argc > 1 ) wrong_args("[filename]"); /* Issue some output for the unix newbie */ if (!fname && !opt.outfile && gnupg_isatty (fileno (stdin)) && gnupg_isatty (fileno (stdout)) && gnupg_isatty (fileno (stderr))) log_info(_("Go ahead and type your message ...\n")); a = iobuf_open(fname); if (a && is_secured_file (iobuf_get_fd (a))) { iobuf_close (a); a = NULL; gpg_err_set_errno (EPERM); } if( !a ) log_error(_("can't open '%s'\n"), print_fname_stdin(fname)); else { if( !opt.no_armor ) { if( use_armor_filter( a ) ) { afx = new_armor_context (); push_armor_filter (afx, a); } } if( cmd == aListPackets ) { opt.list_packets=1; set_packet_list_mode(1); } rc = proc_packets (ctrl, NULL, a ); if( rc ) { write_status_failure ("-", rc); log_error ("processing message failed: %s\n", gpg_strerror (rc)); } iobuf_close(a); } break; } /* cleanup */ gpg_deinit_default_ctrl (ctrl); xfree (ctrl); release_armor_context (afx); FREE_STRLIST(remusr); FREE_STRLIST(locusr); g10_exit(0); return 8; /*NEVER REACHED*/ } /* Note: This function is used by signal handlers!. */ static void emergency_cleanup (void) { gcry_control (GCRYCTL_TERM_SECMEM ); } void g10_exit( int rc ) { /* If we had an error but not printed an error message, do it now. * Note that write_status_failure will never print a second failure * status line. */ if (rc) write_status_failure ("gpg-exit", gpg_error (GPG_ERR_GENERAL)); gcry_control (GCRYCTL_UPDATE_RANDOM_SEED_FILE); if (DBG_CLOCK) log_clock ("stop"); if ( (opt.debug & DBG_MEMSTAT_VALUE) ) { keydb_dump_stats (); sig_check_dump_stats (); gcry_control (GCRYCTL_DUMP_MEMORY_STATS); gcry_control (GCRYCTL_DUMP_RANDOM_STATS); } if (opt.debug) gcry_control (GCRYCTL_DUMP_SECMEM_STATS ); emergency_cleanup (); rc = rc? rc : log_get_errorcount(0)? 2 : g10_errors_seen? 1 : 0; exit (rc); } /* Pretty-print hex hashes. This assumes at least an 80-character display, but there are a few other similar assumptions in the display code. */ static void print_hex (gcry_md_hd_t md, int algo, const char *fname) { int i,n,count,indent=0; const byte *p; if (fname) indent = es_printf("%s: ",fname); if (indent>40) { es_printf ("\n"); indent=0; } if (algo==DIGEST_ALGO_RMD160) indent += es_printf("RMD160 = "); else if (algo>0) indent += es_printf("%6s = ", gcry_md_algo_name (algo)); else algo = abs(algo); count = indent; p = gcry_md_read (md, algo); n = gcry_md_get_algo_dlen (algo); count += es_printf ("%02X",*p++); for(i=1;i79) { es_printf ("\n%*s",indent," "); count = indent; } else count += es_printf(" "); if (!(i%8)) count += es_printf(" "); } else if (n==20) { if(!(i%2)) { if(count+4>79) { es_printf ("\n%*s",indent," "); count=indent; } else count += es_printf(" "); } if (!(i%10)) count += es_printf(" "); } else { if(!(i%4)) { if (count+8>79) { es_printf ("\n%*s",indent," "); count=indent; } else count += es_printf(" "); } } count += es_printf("%02X",*p); } es_printf ("\n"); } static void print_hashline( gcry_md_hd_t md, int algo, const char *fname ) { int i, n; const byte *p; if ( fname ) { for (p = fname; *p; p++ ) { if ( *p <= 32 || *p > 127 || *p == ':' || *p == '%' ) es_printf ("%%%02X", *p ); else es_putc (*p, es_stdout); } } es_putc (':', es_stdout); es_printf ("%d:", algo); p = gcry_md_read (md, algo); n = gcry_md_get_algo_dlen (algo); for(i=0; i < n ; i++, p++ ) es_printf ("%02X", *p); es_fputs (":\n", es_stdout); } static void print_mds( const char *fname, int algo ) { estream_t fp; char buf[1024]; size_t n; gcry_md_hd_t md; if (!fname) { fp = es_stdin; es_set_binary (fp); } else { fp = es_fopen (fname, "rb" ); if (fp && is_secured_file (es_fileno (fp))) { es_fclose (fp); fp = NULL; gpg_err_set_errno (EPERM); } } if (!fp) { log_error("%s: %s\n", fname?fname:"[stdin]", strerror(errno) ); return; } gcry_md_open (&md, 0, 0); if (algo) gcry_md_enable (md, algo); else { if (!gcry_md_test_algo (GCRY_MD_MD5)) gcry_md_enable (md, GCRY_MD_MD5); gcry_md_enable (md, GCRY_MD_SHA1); if (!gcry_md_test_algo (GCRY_MD_RMD160)) gcry_md_enable (md, GCRY_MD_RMD160); if (!gcry_md_test_algo (GCRY_MD_SHA224)) gcry_md_enable (md, GCRY_MD_SHA224); if (!gcry_md_test_algo (GCRY_MD_SHA256)) gcry_md_enable (md, GCRY_MD_SHA256); if (!gcry_md_test_algo (GCRY_MD_SHA384)) gcry_md_enable (md, GCRY_MD_SHA384); if (!gcry_md_test_algo (GCRY_MD_SHA512)) gcry_md_enable (md, GCRY_MD_SHA512); } while ((n=es_fread (buf, 1, DIM(buf), fp))) gcry_md_write (md, buf, n); if (es_ferror(fp)) log_error ("%s: %s\n", fname?fname:"[stdin]", strerror(errno)); else { gcry_md_final (md); if (opt.with_colons) { if ( algo ) print_hashline (md, algo, fname); else { if (!gcry_md_test_algo (GCRY_MD_MD5)) print_hashline( md, GCRY_MD_MD5, fname ); print_hashline( md, GCRY_MD_SHA1, fname ); if (!gcry_md_test_algo (GCRY_MD_RMD160)) print_hashline( md, GCRY_MD_RMD160, fname ); if (!gcry_md_test_algo (GCRY_MD_SHA224)) print_hashline (md, GCRY_MD_SHA224, fname); if (!gcry_md_test_algo (GCRY_MD_SHA256)) print_hashline( md, GCRY_MD_SHA256, fname ); if (!gcry_md_test_algo (GCRY_MD_SHA384)) print_hashline ( md, GCRY_MD_SHA384, fname ); if (!gcry_md_test_algo (GCRY_MD_SHA512)) print_hashline ( md, GCRY_MD_SHA512, fname ); } } else { if (algo) print_hex (md, -algo, fname); else { if (!gcry_md_test_algo (GCRY_MD_MD5)) print_hex (md, GCRY_MD_MD5, fname); print_hex (md, GCRY_MD_SHA1, fname ); if (!gcry_md_test_algo (GCRY_MD_RMD160)) print_hex (md, GCRY_MD_RMD160, fname ); if (!gcry_md_test_algo (GCRY_MD_SHA224)) print_hex (md, GCRY_MD_SHA224, fname); if (!gcry_md_test_algo (GCRY_MD_SHA256)) print_hex (md, GCRY_MD_SHA256, fname ); if (!gcry_md_test_algo (GCRY_MD_SHA384)) print_hex (md, GCRY_MD_SHA384, fname ); if (!gcry_md_test_algo (GCRY_MD_SHA512)) print_hex (md, GCRY_MD_SHA512, fname ); } } } gcry_md_close (md); if (fp != es_stdin) es_fclose (fp); } /**************** * Check the supplied name,value string and add it to the notation * data to be used for signatures. which==0 for sig notations, and 1 * for cert notations. */ static void add_notation_data( const char *string, int which ) { struct notation *notation; notation=string_to_notation(string,utf8_strings); if(notation) { if(which) { notation->next=opt.cert_notations; opt.cert_notations=notation; } else { notation->next=opt.sig_notations; opt.sig_notations=notation; } } } static void add_policy_url( const char *string, int which ) { unsigned int i,critical=0; strlist_t sl; if(*string=='!') { string++; critical=1; } for(i=0;iflags |= 1; } static void add_keyserver_url( const char *string, int which ) { unsigned int i,critical=0; strlist_t sl; if(*string=='!') { string++; critical=1; } for(i=0;iflags |= 1; } static void read_sessionkey_from_fd (int fd) { int i, len; char *line; if (! gnupg_fd_valid (fd)) log_fatal ("override-session-key-fd is invalid: %s\n", strerror (errno)); for (line = NULL, i = len = 100; ; i++ ) { if (i >= len-1 ) { char *tmp = line; len += 100; line = xmalloc_secure (len); if (tmp) { memcpy (line, tmp, i); xfree (tmp); } else i=0; } if (read (fd, line + i, 1) != 1 || line[i] == '\n') break; } line[i] = 0; log_debug ("seskey: %s\n", line); gpgrt_annotate_leaked_object (line); opt.override_session_key = line; } diff --git a/g10/keyserver.c b/g10/keyserver.c index 751022a36..1fbe728ac 100644 --- a/g10/keyserver.c +++ b/g10/keyserver.c @@ -1,1987 +1,2001 @@ /* keyserver.c - generic keyserver code * Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, * 2009, 2011, 2012 Free Software Foundation, Inc. * Copyright (C) 2014 Werner Koch * * This file is part of GnuPG. * * GnuPG is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * GnuPG is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . */ #include #include #include #include #include #include #include "gpg.h" #include "../common/iobuf.h" #include "filter.h" #include "keydb.h" #include "../common/status.h" #include "exec.h" #include "main.h" #include "../common/i18n.h" #include "../common/ttyio.h" #include "options.h" #include "packet.h" #include "trustdb.h" #include "keyserver-internal.h" #include "../common/util.h" #include "../common/membuf.h" #include "../common/mbox-util.h" #include "call-dirmngr.h" #ifdef HAVE_W32_SYSTEM /* It seems Vista doesn't grok X_OK and so fails access() tests. Previous versions interpreted X_OK as F_OK anyway, so we'll just use F_OK directly. */ #undef X_OK #define X_OK F_OK #endif /* HAVE_W32_SYSTEM */ struct keyrec { KEYDB_SEARCH_DESC desc; u32 createtime,expiretime; int size,flags; byte type; IOBUF uidbuf; unsigned int lines; }; /* Parameters for the search line handler. */ struct search_line_handler_parm_s { ctrl_t ctrl; /* The session control structure. */ char *searchstr_disp; /* Native encoded search string or NULL. */ KEYDB_SEARCH_DESC *desc; /* Array with search descriptions. */ int count; /* Number of keys we are currently prepared to handle. This is the size of the DESC array. If it is too small, it will grow safely. */ int validcount; /* Enable the "Key x-y of z" messages. */ int nkeys; /* Number of processed records. */ int any_lines; /* At least one line has been processed. */ unsigned int numlines; /* Counter for displayed lines. */ int eof_seen; /* EOF encountered. */ int not_found; /* Set if no keys have been found. */ }; enum ks_action {KS_UNKNOWN=0,KS_GET,KS_GETNAME,KS_SEND,KS_SEARCH}; static struct parse_options keyserver_opts[]= { /* some of these options are not real - just for the help message */ {"max-cert-size",0,NULL,NULL}, /* MUST be the first in this array! */ {"http-proxy", KEYSERVER_HTTP_PROXY, NULL, /* MUST be the second! */ N_("override proxy options set for dirmngr")}, {"include-revoked",0,NULL,N_("include revoked keys in search results")}, {"include-subkeys",0,NULL,N_("include subkeys when searching by key ID")}, {"timeout", KEYSERVER_TIMEOUT, NULL, N_("override timeout options set for dirmngr")}, {"refresh-add-fake-v3-keyids",KEYSERVER_ADD_FAKE_V3,NULL, NULL}, {"auto-key-retrieve",KEYSERVER_AUTO_KEY_RETRIEVE,NULL, N_("automatically retrieve keys when verifying signatures")}, {"honor-keyserver-url",KEYSERVER_HONOR_KEYSERVER_URL,NULL, N_("honor the preferred keyserver URL set on the key")}, {"honor-pka-record",KEYSERVER_HONOR_PKA_RECORD,NULL, N_("honor the PKA record set on a key when retrieving keys")}, {NULL,0,NULL,NULL} }; static gpg_error_t keyserver_get (ctrl_t ctrl, KEYDB_SEARCH_DESC *desc, int ndesc, struct keyserver_spec *override_keyserver, unsigned int flags, unsigned char **r_fpr, size_t *r_fprlen); static gpg_error_t keyserver_put (ctrl_t ctrl, strlist_t keyspecs); /* Reasonable guess. The commonly used test key simon.josefsson.org is larger than 32k, thus we need at least this value. */ #define DEFAULT_MAX_CERT_SIZE 65536 static size_t max_cert_size=DEFAULT_MAX_CERT_SIZE; static void warn_kshelper_option(char *option, int noisy) { char *p; if ((p=strchr (option, '='))) *p = 0; if (!strcmp (option, "ca-cert-file")) log_info ("keyserver option '%s' is obsolete; please use " "'%s' in dirmngr.conf\n", "ca-cert-file", "hkp-cacert"); else if (!strcmp (option, "check-cert") || !strcmp (option, "broken-http-proxy")) log_info ("keyserver option '%s' is obsolete\n", option); else if (noisy || opt.verbose) log_info ("keyserver option '%s' is unknown\n", option); } /* Called from main to parse the args for --keyserver-options. */ int parse_keyserver_options(char *options) { int ret=1; char *tok; char *max_cert=NULL; keyserver_opts[0].value=&max_cert; keyserver_opts[1].value=&opt.keyserver_options.http_proxy; while((tok=optsep(&options))) { if(tok[0]=='\0') continue; /* We accept quite a few possible options here - some options to handle specially, the keyserver_options list, and import and export options that pertain to keyserver operations. */ if (!parse_options (tok,&opt.keyserver_options.options, keyserver_opts,0) && !parse_import_options(tok,&opt.keyserver_options.import_options,0) && !parse_export_options(tok,&opt.keyserver_options.export_options,0)) { /* All of the standard options have failed, so the option was destined for a keyserver plugin as used by GnuPG < 2.1 */ warn_kshelper_option (tok, 1); } } if(max_cert) { max_cert_size=strtoul(max_cert,(char **)NULL,10); if(max_cert_size==0) max_cert_size=DEFAULT_MAX_CERT_SIZE; } return ret; } void free_keyserver_spec(struct keyserver_spec *keyserver) { xfree(keyserver->uri); xfree(keyserver); } /* Return 0 for match */ static int cmp_keyserver_spec(struct keyserver_spec *one, struct keyserver_spec *two) { return !!ascii_strcasecmp(one->uri, two->uri); } /* Try and match one of our keyservers. If we can, return that. If we can't, return our input. */ struct keyserver_spec * keyserver_match(struct keyserver_spec *spec) { struct keyserver_spec *ks; for(ks=opt.keyserver;ks;ks=ks->next) if(cmp_keyserver_spec(spec,ks)==0) return ks; return spec; } /* Create a new keyserver object from STRING. Unless REQUIRE_SCHEME * is set a missing scheme is replaced by "hkp://". The data structure * could be much easier but in the past we parsed the URI here for the * old 2.0 keyserver helpers - which is not anymore needed. */ keyserver_spec_t parse_keyserver_uri (const char *string, int require_scheme) { struct keyserver_spec *keyserver; const char *idx; int count; log_assert (string); keyserver = xcalloc (1, sizeof *keyserver); /* Get the scheme */ for(idx=string, count=0; *idx && *idx!=':';idx++) { count++; /* Do we see the start of an RFC-2732 ipv6 address here? If so, there clearly isn't a scheme so get out early. */ if(*idx=='[') { /* Was the '[' the first thing in the string? If not, we have a mangled scheme with a [ in it so fail. */ if(count==1) break; else goto fail; } } if(count==0) goto fail; if(*idx=='\0' || *idx=='[') { if(require_scheme) return NULL; /* Assume HKP if there is no scheme */ keyserver->uri = xstrconcat ("hkp://", string, NULL); } else { keyserver->uri = xstrdup (string); } return keyserver; fail: free_keyserver_spec(keyserver); return NULL; } struct keyserver_spec * parse_preferred_keyserver(PKT_signature *sig) { struct keyserver_spec *spec=NULL; const byte *p; size_t plen; p=parse_sig_subpkt(sig->hashed,SIGSUBPKT_PREF_KS,&plen); if(p && plen) { byte *dupe=xmalloc(plen+1); memcpy(dupe,p,plen); dupe[plen]='\0'; spec = parse_keyserver_uri (dupe, 1); xfree(dupe); } return spec; } static void print_keyrec (ctrl_t ctrl, int number,struct keyrec *keyrec) { int i; iobuf_writebyte(keyrec->uidbuf,0); iobuf_flush_temp(keyrec->uidbuf); es_printf ("(%d)\t%s ", number, iobuf_get_temp_buffer (keyrec->uidbuf)); if (keyrec->size>0) es_printf ("%d bit ", keyrec->size); if(keyrec->type) { const char *str; str = openpgp_pk_algo_name (keyrec->type); if (str && strcmp (str, "?")) es_printf ("%s ",str); else es_printf ("unknown "); } switch(keyrec->desc.mode) { /* If the keyserver helper gave us a short keyid, we have no choice but to use it. Do check --keyid-format to add a 0x if needed. */ case KEYDB_SEARCH_MODE_SHORT_KID: es_printf ("key %s%08lX", (opt.keyid_format==KF_0xSHORT || opt.keyid_format==KF_0xLONG)?"0x":"", (ulong)keyrec->desc.u.kid[1]); break; /* However, if it gave us a long keyid, we can honor --keyid-format via keystr(). */ case KEYDB_SEARCH_MODE_LONG_KID: es_printf ("key %s",keystr(keyrec->desc.u.kid)); break; /* If it gave us a PGP 2.x fingerprint, not much we can do beyond displaying it. */ case KEYDB_SEARCH_MODE_FPR16: es_printf ("key "); for(i=0;i<16;i++) es_printf ("%02X",keyrec->desc.u.fpr[i]); break; /* If we get a modern fingerprint, we have the most flexibility. */ case KEYDB_SEARCH_MODE_FPR20: { u32 kid[2]; keyid_from_fingerprint (ctrl, keyrec->desc.u.fpr,20,kid); es_printf("key %s",keystr(kid)); } break; default: BUG(); break; } if(keyrec->createtime>0) { es_printf (", "); es_printf (_("created: %s"), strtimestamp(keyrec->createtime)); } if(keyrec->expiretime>0) { es_printf (", "); es_printf (_("expires: %s"), strtimestamp(keyrec->expiretime)); } if (keyrec->flags&1) es_printf (" (%s)", _("revoked")); if(keyrec->flags&2) es_printf (" (%s)", _("disabled")); if(keyrec->flags&4) es_printf (" (%s)", _("expired")); es_printf ("\n"); } /* Returns a keyrec (which must be freed) once a key is complete, and NULL otherwise. Call with a NULL keystring once key parsing is complete to return any unfinished keys. */ static struct keyrec * parse_keyrec(char *keystring) { /* FIXME: Remove the static and put the data into the parms we use for the caller anyway. */ static struct keyrec *work=NULL; struct keyrec *ret=NULL; char *record; int i; if(keystring==NULL) { if(work==NULL) return NULL; else if(work->desc.mode==KEYDB_SEARCH_MODE_NONE) { xfree(work); return NULL; } else { ret=work; work=NULL; return ret; } } if(work==NULL) { work=xmalloc_clear(sizeof(struct keyrec)); work->uidbuf=iobuf_temp(); } trim_trailing_ws (keystring, strlen (keystring)); if((record=strsep(&keystring,":"))==NULL) return ret; if(ascii_strcasecmp("pub",record)==0) { char *tok; gpg_error_t err; if(work->desc.mode) { ret=work; work=xmalloc_clear(sizeof(struct keyrec)); work->uidbuf=iobuf_temp(); } if((tok=strsep(&keystring,":"))==NULL) return ret; err = classify_user_id (tok, &work->desc, 1); if (err || (work->desc.mode != KEYDB_SEARCH_MODE_SHORT_KID && work->desc.mode != KEYDB_SEARCH_MODE_LONG_KID && work->desc.mode != KEYDB_SEARCH_MODE_FPR16 && work->desc.mode != KEYDB_SEARCH_MODE_FPR20)) { work->desc.mode=KEYDB_SEARCH_MODE_NONE; return ret; } /* Note all items after this are optional. This allows us to have a pub line as simple as pub:keyid and nothing else. */ work->lines++; if((tok=strsep(&keystring,":"))==NULL) return ret; work->type=atoi(tok); if((tok=strsep(&keystring,":"))==NULL) return ret; work->size=atoi(tok); if((tok=strsep(&keystring,":"))==NULL) return ret; if(atoi(tok)<=0) work->createtime=0; else work->createtime=atoi(tok); if((tok=strsep(&keystring,":"))==NULL) return ret; if(atoi(tok)<=0) work->expiretime=0; else { work->expiretime=atoi(tok); /* Force the 'e' flag on if this key is expired. */ if(work->expiretime<=make_timestamp()) work->flags|=4; } if((tok=strsep(&keystring,":"))==NULL) return ret; while(*tok) switch(*tok++) { case 'r': case 'R': work->flags|=1; break; case 'd': case 'D': work->flags|=2; break; case 'e': case 'E': work->flags|=4; break; } } else if(ascii_strcasecmp("uid",record)==0 && work->desc.mode) { char *userid,*tok,*decoded; if((tok=strsep(&keystring,":"))==NULL) return ret; if(strlen(tok)==0) return ret; userid=tok; /* By definition, de-%-encoding is always smaller than the original string so we can decode in place. */ i=0; while(*tok) if(tok[0]=='%' && tok[1] && tok[2]) { int c; userid[i] = (c=hextobyte(&tok[1])) == -1 ? '?' : c; i++; tok+=3; } else userid[i++]=*tok++; /* We don't care about the other info provided in the uid: line since no keyserver supports marking userids with timestamps or revoked/expired/disabled yet. */ /* No need to check for control characters, as utf8_to_native does this for us. */ decoded=utf8_to_native(userid,i,0); if(strlen(decoded)>opt.screen_columns-10) decoded[opt.screen_columns-10]='\0'; iobuf_writestr(work->uidbuf,decoded); xfree(decoded); iobuf_writestr(work->uidbuf,"\n\t"); work->lines++; } /* Ignore any records other than "pri" and "uid" for easy future growth. */ return ret; } /* Show a prompt and allow the user to select keys for retrieval. */ static gpg_error_t show_prompt (ctrl_t ctrl, KEYDB_SEARCH_DESC *desc, int numdesc, int count, const char *search) { gpg_error_t err; char *answer = NULL; es_fflush (es_stdout); if (count && opt.command_fd == -1) { static int from = 1; tty_printf ("Keys %d-%d of %d for \"%s\". ", from, numdesc, count, search); from = numdesc + 1; } again: err = 0; xfree (answer); answer = cpr_get_no_help ("keysearch.prompt", _("Enter number(s), N)ext, or Q)uit > ")); /* control-d */ if (answer[0]=='\x04') { tty_printf ("Q\n"); answer[0] = 'q'; } if (answer[0]=='q' || answer[0]=='Q') err = gpg_error (GPG_ERR_CANCELED); else if (atoi (answer) >= 1 && atoi (answer) <= numdesc) { char *split = answer; char *num; int numarray[50]; int numidx = 0; int idx; while ((num = strsep (&split, " ,"))) if (atoi (num) >= 1 && atoi (num) <= numdesc) { if (numidx >= DIM (numarray)) { tty_printf ("Too many keys selected\n"); goto again; } numarray[numidx++] = atoi (num); } if (!numidx) goto again; { KEYDB_SEARCH_DESC *selarray; selarray = xtrymalloc (numidx * sizeof *selarray); if (!selarray) { err = gpg_error_from_syserror (); goto leave; } for (idx = 0; idx < numidx; idx++) selarray[idx] = desc[numarray[idx]-1]; err = keyserver_get (ctrl, selarray, numidx, NULL, 0, NULL, NULL); xfree (selarray); } } leave: xfree (answer); return err; } /* This is a callback used by call-dirmngr.c to process the result of KS_SEARCH command. If SPECIAL is 0, LINE is the actual data line received with all escaping removed and guaranteed to be exactly one line with stripped LF; an EOF is indicated by LINE passed as NULL. If special is 1, the line contains the source of the information (usually an URL). LINE may be modified after return. */ static gpg_error_t search_line_handler (void *opaque, int special, char *line) { struct search_line_handler_parm_s *parm = opaque; gpg_error_t err = 0; struct keyrec *keyrec; if (special == 1) { log_info ("data source: %s\n", line); return 0; } else if (special) { log_debug ("unknown value %d for special search callback", special); return 0; } if (parm->eof_seen && line) { log_debug ("ooops: unexpected data after EOF\n"); line = NULL; } /* Print the received line. */ if (opt.with_colons && line) { es_printf ("%s\n", line); } /* Look for an info: line. The only current info: values defined are the version and key count. */ if (line && !parm->any_lines && !ascii_strncasecmp ("info:", line, 5)) { char *str = line + 5; char *tok; if ((tok = strsep (&str, ":"))) { int version; if (sscanf (tok, "%d", &version) !=1 ) version = 1; if (version !=1 ) { log_error (_("invalid keyserver protocol " "(us %d!=handler %d)\n"), 1, version); return gpg_error (GPG_ERR_UNSUPPORTED_PROTOCOL); } } if ((tok = strsep (&str, ":")) && sscanf (tok, "%d", &parm->count) == 1) { if (!parm->count) parm->not_found = 1;/* Server indicated that no items follow. */ else if (parm->count < 0) parm->count = 10; /* Bad value - assume something reasonable. */ else parm->validcount = 1; /* COUNT seems to be okay. */ } parm->any_lines = 1; return 0; /* Line processing finished. */ } again: if (line) keyrec = parse_keyrec (line); else { /* Received EOF - flush data */ parm->eof_seen = 1; keyrec = parse_keyrec (NULL); if (!keyrec) { if (!parm->nkeys) parm->not_found = 1; /* No keys at all. */ else { if (parm->nkeys != parm->count) parm->validcount = 0; if (!(opt.with_colons && opt.batch)) { err = show_prompt (parm->ctrl, parm->desc, parm->nkeys, parm->validcount? parm->count : 0, parm->searchstr_disp); return err; } } } } /* Save the key in the key array. */ if (keyrec) { /* Allocate or enlarge the key array if needed. */ if (!parm->desc) { if (parm->count < 1) { parm->count = 10; parm->validcount = 0; } parm->desc = xtrymalloc (parm->count * sizeof *parm->desc); if (!parm->desc) { err = gpg_error_from_syserror (); iobuf_close (keyrec->uidbuf); xfree (keyrec); return err; } } else if (parm->nkeys == parm->count) { /* Keyserver sent more keys than claimed in the info: line. */ KEYDB_SEARCH_DESC *tmp; int newcount = parm->count + 10; tmp = xtryrealloc (parm->desc, newcount * sizeof *parm->desc); if (!tmp) { err = gpg_error_from_syserror (); iobuf_close (keyrec->uidbuf); xfree (keyrec); return err; } parm->count = newcount; parm->desc = tmp; parm->validcount = 0; } parm->desc[parm->nkeys] = keyrec->desc; if (!opt.with_colons) { /* SCREEN_LINES - 1 for the prompt. */ if (parm->numlines + keyrec->lines > opt.screen_lines - 1) { err = show_prompt (parm->ctrl, parm->desc, parm->nkeys, parm->validcount ? parm->count:0, parm->searchstr_disp); if (err) return err; parm->numlines = 0; } print_keyrec (parm->ctrl, parm->nkeys+1, keyrec); } parm->numlines += keyrec->lines; iobuf_close (keyrec->uidbuf); xfree (keyrec); parm->any_lines = 1; parm->nkeys++; /* If we are here due to a flush after the EOF, run again for the last prompt. Fixme: Make this code better readable. */ if (parm->eof_seen) goto again; } return 0; } int keyserver_export (ctrl_t ctrl, strlist_t users) { gpg_error_t err; strlist_t sl=NULL; KEYDB_SEARCH_DESC desc; int rc=0; /* Weed out descriptors that we don't support sending */ for(;users;users=users->next) { err = classify_user_id (users->d, &desc, 1); if (err || (desc.mode != KEYDB_SEARCH_MODE_SHORT_KID && desc.mode != KEYDB_SEARCH_MODE_LONG_KID && desc.mode != KEYDB_SEARCH_MODE_FPR16 && desc.mode != KEYDB_SEARCH_MODE_FPR20)) { log_error(_("\"%s\" not a key ID: skipping\n"),users->d); continue; } else append_to_strlist(&sl,users->d); } if(sl) { rc = keyserver_put (ctrl, sl); free_strlist(sl); } return rc; } /* Structure to convey the arg to keyserver_retrieval_screener. */ struct ks_retrieval_screener_arg_s { KEYDB_SEARCH_DESC *desc; int ndesc; }; /* Check whether a key matches the search description. The function returns 0 if the key shall be imported. */ static gpg_error_t keyserver_retrieval_screener (kbnode_t keyblock, void *opaque) { struct ks_retrieval_screener_arg_s *arg = opaque; KEYDB_SEARCH_DESC *desc = arg->desc; int ndesc = arg->ndesc; kbnode_t node; PKT_public_key *pk; int n; u32 keyid[2]; byte fpr[MAX_FINGERPRINT_LEN]; size_t fpr_len = 0; /* Secret keys are not expected from a keyserver. We do not care about secret subkeys because the import code takes care of skipping them. Not allowing an import of a public key with a secret subkey would make it too easy to inhibit the downloading of a public key. Recall that keyservers do only limited checks. */ node = find_kbnode (keyblock, PKT_SECRET_KEY); if (node) return gpg_error (GPG_ERR_GENERAL); /* Do not import. */ if (!ndesc) return 0; /* Okay if no description given. */ /* Loop over all key packets. */ for (node = keyblock; node; node = node->next) { if (node->pkt->pkttype != PKT_PUBLIC_KEY && node->pkt->pkttype != PKT_PUBLIC_SUBKEY) continue; pk = node->pkt->pkt.public_key; fingerprint_from_pk (pk, fpr, &fpr_len); keyid_from_pk (pk, keyid); /* Compare requested and returned fingerprints if available. */ for (n = 0; n < ndesc; n++) { if (desc[n].mode == KEYDB_SEARCH_MODE_FPR20) { if (fpr_len == 20 && !memcmp (fpr, desc[n].u.fpr, 20)) return 0; } else if (desc[n].mode == KEYDB_SEARCH_MODE_FPR16) { if (fpr_len == 16 && !memcmp (fpr, desc[n].u.fpr, 16)) return 0; } else if (desc[n].mode == KEYDB_SEARCH_MODE_LONG_KID) { if (keyid[0] == desc[n].u.kid[0] && keyid[1] == desc[n].u.kid[1]) return 0; } else if (desc[n].mode == KEYDB_SEARCH_MODE_SHORT_KID) { if (keyid[1] == desc[n].u.kid[1]) return 0; } else /* No keyid or fingerprint - can't check. */ return 0; /* allow import. */ } } return gpg_error (GPG_ERR_GENERAL); } int keyserver_import (ctrl_t ctrl, strlist_t users) { gpg_error_t err; KEYDB_SEARCH_DESC *desc; int num=100,count=0; int rc=0; /* Build a list of key ids */ desc=xmalloc(sizeof(KEYDB_SEARCH_DESC)*num); for(;users;users=users->next) { err = classify_user_id (users->d, &desc[count], 1); if (err || (desc[count].mode != KEYDB_SEARCH_MODE_SHORT_KID && desc[count].mode != KEYDB_SEARCH_MODE_LONG_KID && desc[count].mode != KEYDB_SEARCH_MODE_FPR16 && desc[count].mode != KEYDB_SEARCH_MODE_FPR20)) { log_error (_("\"%s\" not a key ID: skipping\n"), users->d); continue; } count++; if(count==num) { num+=100; desc=xrealloc(desc,sizeof(KEYDB_SEARCH_DESC)*num); } } if(count>0) rc = keyserver_get (ctrl, desc, count, NULL, 0, NULL, NULL); xfree(desc); return rc; } /* Return true if any keyserver has been configured. */ int keyserver_any_configured (ctrl_t ctrl) { return !gpg_dirmngr_ks_list (ctrl, NULL); } /* Import all keys that exactly match MBOX */ int keyserver_import_mbox (ctrl_t ctrl, const char *mbox, unsigned char **fpr, size_t *fprlen, struct keyserver_spec *keyserver) { KEYDB_SEARCH_DESC desc = { 0 }; desc.mode = KEYDB_SEARCH_MODE_MAIL; desc.u.name = mbox; return keyserver_get (ctrl, &desc, 1, keyserver, 0, fpr, fprlen); } /* Import the keys that match exactly MBOX */ int keyserver_import_ntds (ctrl_t ctrl, const char *mbox, unsigned char **fpr, size_t *fprlen) { KEYDB_SEARCH_DESC desc = { 0 }; struct keyserver_spec keyserver = { NULL, "ldap:///" }; desc.mode = KEYDB_SEARCH_MODE_MAIL; desc.u.name = mbox; return keyserver_get (ctrl, &desc, 1, &keyserver, 0, fpr, fprlen); } int keyserver_import_fprint (ctrl_t ctrl, const byte *fprint, size_t fprint_len, struct keyserver_spec *keyserver, unsigned int flags) { KEYDB_SEARCH_DESC desc; memset (&desc, 0, sizeof(desc)); if(fprint_len==16) desc.mode=KEYDB_SEARCH_MODE_FPR16; else if(fprint_len==20) desc.mode=KEYDB_SEARCH_MODE_FPR20; else return gpg_error (GPG_ERR_INV_ARG); memcpy (desc.u.fpr, fprint, fprint_len); return keyserver_get (ctrl, &desc, 1, keyserver, flags, NULL, NULL); } int keyserver_import_fprint_ntds (ctrl_t ctrl, const byte *fprint, size_t fprint_len) { struct keyserver_spec keyserver = { NULL, "ldap:///" }; return keyserver_import_fprint (ctrl, fprint, fprint_len, &keyserver, KEYSERVER_IMPORT_FLAG_LDAP); } int keyserver_import_keyid (ctrl_t ctrl, u32 *keyid,struct keyserver_spec *keyserver, unsigned int flags) { KEYDB_SEARCH_DESC desc; memset(&desc,0,sizeof(desc)); desc.mode=KEYDB_SEARCH_MODE_LONG_KID; desc.u.kid[0]=keyid[0]; desc.u.kid[1]=keyid[1]; return keyserver_get (ctrl, &desc, 1, keyserver, flags, NULL, NULL); } /* code mostly stolen from do_export_stream */ static int keyidlist (ctrl_t ctrl, strlist_t users, KEYDB_SEARCH_DESC **klist, int *count) { int rc = 0; int num = 100; kbnode_t keyblock = NULL; kbnode_t node; KEYDB_HANDLE kdbhd; int ndesc; KEYDB_SEARCH_DESC *desc = NULL; strlist_t sl; *count=0; *klist=xmalloc(sizeof(KEYDB_SEARCH_DESC)*num); kdbhd = keydb_new (); if (!kdbhd) { rc = gpg_error_from_syserror (); goto leave; } keydb_disable_caching (kdbhd); /* We are looping the search. */ if(!users) { ndesc = 1; desc = xmalloc_clear ( ndesc * sizeof *desc); desc[0].mode = KEYDB_SEARCH_MODE_FIRST; } else { for (ndesc=0, sl=users; sl; sl = sl->next, ndesc++) ; desc = xmalloc ( ndesc * sizeof *desc); for (ndesc=0, sl=users; sl; sl = sl->next) { gpg_error_t err; if (!(err = classify_user_id (sl->d, desc+ndesc, 1))) ndesc++; else log_error (_("key \"%s\" not found: %s\n"), sl->d, gpg_strerror (err)); } } for (;;) { rc = keydb_search (kdbhd, desc, ndesc, NULL); if (rc) break; /* ready. */ if (!users) desc[0].mode = KEYDB_SEARCH_MODE_NEXT; /* read the keyblock */ rc = keydb_get_keyblock (kdbhd, &keyblock ); if( rc ) { log_error (_("error reading keyblock: %s\n"), gpg_strerror (rc) ); goto leave; } if((node=find_kbnode(keyblock,PKT_PUBLIC_KEY))) { /* v4 keys get full fingerprints. v3 keys get long keyids. This is because it's easy to calculate any sort of keyid from a v4 fingerprint, but not a v3 fingerprint. */ if(node->pkt->pkt.public_key->version<4) { (*klist)[*count].mode=KEYDB_SEARCH_MODE_LONG_KID; keyid_from_pk(node->pkt->pkt.public_key, (*klist)[*count].u.kid); } else { size_t dummy; (*klist)[*count].mode=KEYDB_SEARCH_MODE_FPR20; fingerprint_from_pk(node->pkt->pkt.public_key, (*klist)[*count].u.fpr,&dummy); } /* This is a little hackish, using the skipfncvalue as a void* pointer to the keyserver spec, but we don't need the skipfnc here, and it saves having an additional field for this (which would be wasted space most of the time). */ (*klist)[*count].skipfncvalue=NULL; /* Are we honoring preferred keyservers? */ if(opt.keyserver_options.options&KEYSERVER_HONOR_KEYSERVER_URL) { PKT_user_id *uid=NULL; PKT_signature *sig=NULL; merge_keys_and_selfsig (ctrl, keyblock); for(node=node->next;node;node=node->next) { if(node->pkt->pkttype==PKT_USER_ID && node->pkt->pkt.user_id->flags.primary) uid=node->pkt->pkt.user_id; else if(node->pkt->pkttype==PKT_SIGNATURE && node->pkt->pkt.signature-> flags.chosen_selfsig && uid) { sig=node->pkt->pkt.signature; break; } } /* Try and parse the keyserver URL. If it doesn't work, then we end up writing NULL which indicates we are the same as any other key. */ if(sig) (*klist)[*count].skipfncvalue=parse_preferred_keyserver(sig); } (*count)++; if(*count==num) { num+=100; *klist=xrealloc(*klist,sizeof(KEYDB_SEARCH_DESC)*num); } } } if (gpg_err_code (rc) == GPG_ERR_NOT_FOUND) rc = 0; leave: if(rc) { xfree(*klist); *klist = NULL; } xfree(desc); keydb_release(kdbhd); release_kbnode(keyblock); return rc; } /* Note this is different than the original HKP refresh. It allows usernames to refresh only part of the keyring. */ gpg_error_t keyserver_refresh (ctrl_t ctrl, strlist_t users) { gpg_error_t err; int count, numdesc; KEYDB_SEARCH_DESC *desc; unsigned int options=opt.keyserver_options.import_options; /* We switch merge-only on during a refresh, as 'refresh' should never import new keys, even if their keyids match. */ opt.keyserver_options.import_options|=IMPORT_MERGE_ONLY; /* Similarly, we switch on fast-import, since refresh may make multiple import sets (due to preferred keyserver URLs). We don't want each set to rebuild the trustdb. Instead we do it once at the end here. */ opt.keyserver_options.import_options|=IMPORT_FAST; err = keyidlist (ctrl, users, &desc, &numdesc); if (err) return err; count=numdesc; if(count>0) { int i; /* Try to handle preferred keyserver keys first */ for(i=0;iuri); /* We use the keyserver structure we parsed out before. Note that a preferred keyserver without a scheme:// will be interpreted as hkp:// */ err = keyserver_get (ctrl, &desc[i], 1, keyserver, 0, NULL, NULL); if (err) log_info(_("WARNING: unable to refresh key %s" " via %s: %s\n"),keystr_from_desc(&desc[i]), keyserver->uri,gpg_strerror (err)); else { /* We got it, so mark it as NONE so we don't try and get it again from the regular keyserver. */ desc[i].mode=KEYDB_SEARCH_MODE_NONE; count--; } free_keyserver_spec(keyserver); } } } if(count>0) { char *tmpuri; err = gpg_dirmngr_ks_list (ctrl, &tmpuri); if (!err) { if (!opt.quiet) { log_info (ngettext("refreshing %d key from %s\n", "refreshing %d keys from %s\n", count), count, tmpuri); } xfree (tmpuri); err = keyserver_get (ctrl, desc, numdesc, NULL, 0, NULL, NULL); } } xfree(desc); opt.keyserver_options.import_options=options; /* If the original options didn't have fast import, and the trustdb is dirty, rebuild. */ if(!(opt.keyserver_options.import_options&IMPORT_FAST)) check_or_update_trustdb (ctrl); return err; } /* Search for keys on the keyservers. The patterns are given in the string list TOKENS. */ gpg_error_t keyserver_search (ctrl_t ctrl, strlist_t tokens) { gpg_error_t err; char *searchstr; struct search_line_handler_parm_s parm; memset (&parm, 0, sizeof parm); if (!tokens) return 0; /* Return success if no patterns are given. */ { membuf_t mb; strlist_t item; init_membuf (&mb, 1024); for (item = tokens; item; item = item->next) { if (item != tokens) put_membuf (&mb, " ", 1); put_membuf_str (&mb, item->d); } put_membuf (&mb, "", 1); /* Append Nul. */ searchstr = get_membuf (&mb, NULL); if (!searchstr) { err = gpg_error_from_syserror (); goto leave; } } parm.ctrl = ctrl; if (searchstr) parm.searchstr_disp = utf8_to_native (searchstr, strlen (searchstr), 0); err = gpg_dirmngr_ks_search (ctrl, searchstr, search_line_handler, &parm); if (parm.not_found || gpg_err_code (err) == GPG_ERR_NO_DATA) { if (parm.searchstr_disp) log_info (_("key \"%s\" not found on keyserver\n"), parm.searchstr_disp); else log_info (_("key not found on keyserver\n")); } if (gpg_err_code (err) == GPG_ERR_NO_DATA) err = gpg_error (GPG_ERR_NOT_FOUND); else if (err) log_error ("error searching keyserver: %s\n", gpg_strerror (err)); leave: xfree (parm.desc); xfree (parm.searchstr_disp); xfree(searchstr); return err; } /* Helper for keyserver_get. Here we only receive a chunk of the description to be processed in one batch. This is required due to the limited number of patterns the dirmngr interface (KS_GET) can grok and to limit the amount of temporary required memory. */ static gpg_error_t keyserver_get_chunk (ctrl_t ctrl, KEYDB_SEARCH_DESC *desc, int ndesc, int *r_ndesc_used, import_stats_t stats_handle, struct keyserver_spec *override_keyserver, unsigned int flags, unsigned char **r_fpr, size_t *r_fprlen) { gpg_error_t err = 0; char **pattern; int idx, npat, npat_fpr; estream_t datastream; char *source = NULL; size_t linelen; /* Estimated linelen for KS_GET. */ size_t n; int only_fprs; #define MAX_KS_GET_LINELEN 950 /* Somewhat lower than the real limit. */ *r_ndesc_used = 0; /* Create an array filled with a search pattern for each key. The array is delimited by a NULL entry. */ pattern = xtrycalloc (ndesc+1, sizeof *pattern); if (!pattern) return gpg_error_from_syserror (); /* Note that we break the loop as soon as our estimation of the to be used line length reaches the limit. But we do this only if we have processed at least one search requests so that an overlong single request will be rejected only later by gpg_dirmngr_ks_get but we are sure that R_NDESC_USED has been updated. This avoids a possible indefinite loop. */ linelen = 24; /* "KS_GET --quick --ldap --" */ for (npat=npat_fpr=0, idx=0; idx < ndesc; idx++) { int quiet = 0; if (desc[idx].mode == KEYDB_SEARCH_MODE_FPR20 || desc[idx].mode == KEYDB_SEARCH_MODE_FPR16) { n = 1+2+2*20; if (idx && linelen + n > MAX_KS_GET_LINELEN) break; /* Declare end of this chunk. */ linelen += n; pattern[npat] = xtrymalloc (n); if (!pattern[npat]) err = gpg_error_from_syserror (); else { strcpy (pattern[npat], "0x"); bin2hex (desc[idx].u.fpr, desc[idx].mode == KEYDB_SEARCH_MODE_FPR20? 20 : 16, pattern[npat]+2); npat++; if (desc[idx].mode == KEYDB_SEARCH_MODE_FPR20) npat_fpr++; } } else if(desc[idx].mode == KEYDB_SEARCH_MODE_LONG_KID) { n = 1+2+16; if (idx && linelen + n > MAX_KS_GET_LINELEN) break; /* Declare end of this chunk. */ linelen += n; pattern[npat] = xtryasprintf ("0x%08lX%08lX", (ulong)desc[idx].u.kid[0], (ulong)desc[idx].u.kid[1]); if (!pattern[npat]) err = gpg_error_from_syserror (); else npat++; } else if(desc[idx].mode == KEYDB_SEARCH_MODE_SHORT_KID) { n = 1+2+8; if (idx && linelen + n > MAX_KS_GET_LINELEN) break; /* Declare end of this chunk. */ linelen += n; pattern[npat] = xtryasprintf ("0x%08lX", (ulong)desc[idx].u.kid[1]); if (!pattern[npat]) err = gpg_error_from_syserror (); else npat++; } else if(desc[idx].mode == KEYDB_SEARCH_MODE_EXACT) { /* The Dirmngr also uses classify_user_id to detect the type of the search string. By adding the '=' prefix we force Dirmngr's KS_GET to consider this an exact search string. (In gpg 1.4 and gpg 2.0 the keyserver helpers used the KS_GETNAME command to indicate this.) */ n = 1+1+strlen (desc[idx].u.name); if (idx && linelen + n > MAX_KS_GET_LINELEN) break; /* Declare end of this chunk. */ linelen += n; pattern[npat] = strconcat ("=", desc[idx].u.name, NULL); if (!pattern[npat]) err = gpg_error_from_syserror (); else { npat++; quiet = 1; } } else if(desc[idx].mode == KEYDB_SEARCH_MODE_MAIL) { n = 1 + strlen (desc[idx].u.name) + 1 + 1; if (idx && linelen + n > MAX_KS_GET_LINELEN) break; /* Declare end of this chunk. */ linelen += n; if (desc[idx].u.name[0] == '<') pattern[npat] = xtrystrdup (desc[idx].u.name); else pattern[npat] = strconcat ("<", desc[idx].u.name, ">", NULL); if (!pattern[npat]) err = gpg_error_from_syserror (); else { npat++; quiet = 1; } } else if (desc[idx].mode == KEYDB_SEARCH_MODE_NONE) continue; else BUG(); if (err) { for (idx=0; idx < npat; idx++) xfree (pattern[idx]); xfree (pattern); return err; } if (!quiet && override_keyserver) { log_info (_("requesting key %s from %s\n"), keystr_from_desc (&desc[idx]), override_keyserver->uri); } } /* Remember now many of search items were considered. Note that this is different from NPAT. */ *r_ndesc_used = idx; only_fprs = (npat && npat == npat_fpr); err = gpg_dirmngr_ks_get (ctrl, pattern, override_keyserver, flags, &datastream, &source); for (idx=0; idx < npat; idx++) xfree (pattern[idx]); xfree (pattern); if (opt.verbose && source) log_info ("data source: %s\n", source); if (!err) { struct ks_retrieval_screener_arg_s screenerarg; unsigned int options; /* FIXME: Check whether this comment should be moved to dirmngr. Slurp up all the key data. In the future, it might be nice to look for KEY foo OUTOFBAND and FAILED indicators. It's harmless to ignore them, but ignoring them does make gpg complain about "no valid OpenPGP data found". One way to do this could be to continue parsing this line-by-line and make a temp iobuf for each key. Note that we don't allow the import of secret keys from a keyserver. Keyservers should never accept or send them but we better protect against rogue keyservers. */ /* For LDAP servers we reset IMPORT_SELF_SIGS_ONLY unless it has * been set explicitly. */ options = (opt.keyserver_options.import_options | IMPORT_NO_SECKEY); if (source && (!strncmp (source, "ldap:", 5) || !strncmp (source, "ldaps:", 6)) && !opt.flags.expl_import_self_sigs_only) options &= ~IMPORT_SELF_SIGS_ONLY; screenerarg.desc = desc; screenerarg.ndesc = *r_ndesc_used; import_keys_es_stream (ctrl, datastream, stats_handle, r_fpr, r_fprlen, options, keyserver_retrieval_screener, &screenerarg, only_fprs? KEYORG_KS : 0, source); } es_fclose (datastream); xfree (source); return err; } /* Retrieve a key from a keyserver. The search pattern are in (DESC,NDESC). Allowed search modes are keyid, fingerprint, and exact searches. OVERRIDE_KEYSERVER gives an optional override keyserver. If (R_FPR,R_FPRLEN) are not NULL, they may return the fingerprint of a single imported key. If the FLAG bit KEYSERVER_IMPORT_FLAG_QUICK is set, dirmngr is advised to use a shorter timeout. */ static gpg_error_t keyserver_get (ctrl_t ctrl, KEYDB_SEARCH_DESC *desc, int ndesc, struct keyserver_spec *override_keyserver, unsigned int flags, unsigned char **r_fpr, size_t *r_fprlen) { gpg_error_t err; import_stats_t stats_handle; int ndesc_used; int any_good = 0; stats_handle = import_new_stats_handle(); for (;;) { err = keyserver_get_chunk (ctrl, desc, ndesc, &ndesc_used, stats_handle, override_keyserver, flags, r_fpr, r_fprlen); if (!err) any_good = 1; if (err || ndesc_used >= ndesc) break; /* Error or all processed. */ /* Prepare for the next chunk. */ desc += ndesc_used; ndesc -= ndesc_used; } if (any_good) import_print_stats (stats_handle); import_release_stats_handle (stats_handle); return err; } /* Send all keys specified by KEYSPECS to the configured keyserver. */ static gpg_error_t keyserver_put (ctrl_t ctrl, strlist_t keyspecs) { gpg_error_t err; strlist_t kspec; char *ksurl; if (!keyspecs) return 0; /* Return success if the list is empty. */ if (gpg_dirmngr_ks_list (ctrl, &ksurl)) { log_error (_("no keyserver known\n")); return gpg_error (GPG_ERR_NO_KEYSERVER); } for (kspec = keyspecs; kspec; kspec = kspec->next) { void *data; size_t datalen; kbnode_t keyblock; err = export_pubkey_buffer (ctrl, kspec->d, opt.keyserver_options.export_options, NULL, 0, NULL, &keyblock, &data, &datalen); if (err) log_error (_("skipped \"%s\": %s\n"), kspec->d, gpg_strerror (err)); else { if (!opt.quiet) log_info (_("sending key %s to %s\n"), keystr (keyblock->pkt->pkt.public_key->keyid), ksurl?ksurl:"[?]"); err = gpg_dirmngr_ks_put (ctrl, data, datalen, keyblock); release_kbnode (keyblock); xfree (data); if (err) { write_status_error ("keyserver_send", err); log_error (_("keyserver send failed: %s\n"), gpg_strerror (err)); } } } xfree (ksurl); return err; } /* Loop over all URLs in STRLIST and fetch the key at that URL. Note that the fetch operation ignores the configured keyservers and instead directly retrieves the keys. */ int keyserver_fetch (ctrl_t ctrl, strlist_t urilist, int origin) { gpg_error_t err; strlist_t sl; estream_t datastream; unsigned int save_options = opt.keyserver_options.import_options; + int any_success = 0; + gpg_error_t firsterr = 0; /* Switch on fast-import, since fetch can handle more than one import and we don't want each set to rebuild the trustdb. Instead we do it once at the end. */ opt.keyserver_options.import_options |= IMPORT_FAST; for (sl=urilist; sl; sl=sl->next) { if (!opt.quiet) log_info (_("requesting key from '%s'\n"), sl->d); err = gpg_dirmngr_ks_fetch (ctrl, sl->d, &datastream); if (!err) { import_stats_t stats_handle; stats_handle = import_new_stats_handle(); import_keys_es_stream (ctrl, datastream, stats_handle, NULL, NULL, opt.keyserver_options.import_options, NULL, NULL, origin, sl->d); import_print_stats (stats_handle); import_release_stats_handle (stats_handle); + any_success = 1; } else - log_info (_("WARNING: unable to fetch URI %s: %s\n"), - sl->d, gpg_strerror (err)); + { + log_info (_("WARNING: unable to fetch URI %s: %s\n"), + sl->d, gpg_strerror (err)); + if (!firsterr) + firsterr = err; + } es_fclose (datastream); } + if (!urilist) + err = gpg_error (GPG_ERR_NO_NAME); + else if (any_success) + err = 0; + else + err = firsterr; + opt.keyserver_options.import_options = save_options; /* If the original options didn't have fast import, and the trustdb is dirty, rebuild. */ if (!(opt.keyserver_options.import_options&IMPORT_FAST)) check_or_update_trustdb (ctrl); - return 0; + return err; } /* Import key in a CERT or pointed to by a CERT. In DANE_MODE fetch the certificate using the DANE method. */ int keyserver_import_cert (ctrl_t ctrl, const char *name, int dane_mode, unsigned char **fpr,size_t *fpr_len) { gpg_error_t err; char *look,*url; estream_t key; look = xstrdup(name); if (!dane_mode) { char *domain = strrchr (look,'@'); if (domain) *domain='.'; } err = gpg_dirmngr_dns_cert (ctrl, look, dane_mode? NULL : "*", &key, fpr, fpr_len, &url); if (err) ; else if (key) { int armor_status=opt.no_armor; import_filter_t save_filt; /* CERTs and DANE records are always in binary format */ opt.no_armor=1; if (dane_mode) { save_filt = save_and_clear_import_filter (); if (!save_filt) err = gpg_error_from_syserror (); else { char *filtstr = es_bsprintf ("keep-uid=mbox = %s", look); err = filtstr? 0 : gpg_error_from_syserror (); if (!err) err = parse_and_set_import_filter (filtstr); xfree (filtstr); if (!err) err = import_keys_es_stream (ctrl, key, NULL, fpr, fpr_len, IMPORT_NO_SECKEY, NULL, NULL, KEYORG_DANE, NULL); restore_import_filter (save_filt); } } else { err = import_keys_es_stream (ctrl, key, NULL, fpr, fpr_len, (opt.keyserver_options.import_options | IMPORT_NO_SECKEY), NULL, NULL, 0, NULL); } opt.no_armor=armor_status; es_fclose (key); key = NULL; } else if (*fpr) { /* We only consider the IPGP type if a fingerprint was provided. This lets us select the right key regardless of what a URL points to, or get the key from a keyserver. */ if(url) { struct keyserver_spec *spec; spec = parse_keyserver_uri (url, 1); if(spec) { err = keyserver_import_fprint (ctrl, *fpr, *fpr_len, spec, 0); free_keyserver_spec(spec); } } else if (keyserver_any_configured (ctrl)) { /* If only a fingerprint is provided, try and fetch it from the configured keyserver. */ err = keyserver_import_fprint (ctrl, *fpr, *fpr_len, opt.keyserver, 0); } else log_info(_("no keyserver known\n")); /* Give a better string here? "CERT fingerprint for \"%s\" found, but no keyserver" " known (use option --keyserver)\n" ? */ } xfree(url); xfree(look); return err; } /* Import key pointed to by a PKA record. Return the requested fingerprint in fpr. */ gpg_error_t keyserver_import_pka (ctrl_t ctrl, const char *name, unsigned char **fpr, size_t *fpr_len) { gpg_error_t err; char *url; err = gpg_dirmngr_get_pka (ctrl, name, fpr, fpr_len, &url); if (url && *url && fpr && fpr_len) { /* An URL is available. Lookup the key. */ struct keyserver_spec *spec; spec = parse_keyserver_uri (url, 1); if (spec) { err = keyserver_import_fprint (ctrl, *fpr, *fpr_len, spec, 0); free_keyserver_spec (spec); } } xfree (url); if (err) { xfree(*fpr); *fpr = NULL; *fpr_len = 0; } return err; } /* Import a key using the Web Key Directory protocol. */ gpg_error_t keyserver_import_wkd (ctrl_t ctrl, const char *name, unsigned int flags, unsigned char **fpr, size_t *fpr_len) { gpg_error_t err; char *mbox; estream_t key; char *url = NULL; /* We want to work on the mbox. That is what dirmngr will do anyway * and we need the mbox for the import filter anyway. */ mbox = mailbox_from_userid (name); if (!mbox) { err = gpg_error_from_syserror (); if (gpg_err_code (err) == GPG_ERR_EINVAL) err = gpg_error (GPG_ERR_INV_USER_ID); return err; } err = gpg_dirmngr_wkd_get (ctrl, mbox, flags, &key, &url); if (err) ; else if (key) { int armor_status = opt.no_armor; import_filter_t save_filt; /* Keys returned via WKD are in binary format. However, we * relax that requirement and allow also for armored data. */ opt.no_armor = 0; save_filt = save_and_clear_import_filter (); if (!save_filt) err = gpg_error_from_syserror (); else { char *filtstr = es_bsprintf ("keep-uid=mbox = %s", mbox); err = filtstr? 0 : gpg_error_from_syserror (); if (!err) err = parse_and_set_import_filter (filtstr); xfree (filtstr); if (!err) err = import_keys_es_stream (ctrl, key, NULL, fpr, fpr_len, IMPORT_NO_SECKEY, NULL, NULL, KEYORG_WKD, url); } restore_import_filter (save_filt); opt.no_armor = armor_status; es_fclose (key); key = NULL; } xfree (url); xfree (mbox); return err; } /* Import a key by name using LDAP */ int keyserver_import_ldap (ctrl_t ctrl, const char *name, unsigned char **fpr, size_t *fprlen) { (void)ctrl; (void)name; (void)fpr; (void)fprlen; return gpg_error (GPG_ERR_NOT_IMPLEMENTED); /*FIXME*/ #if 0 char *domain; struct keyserver_spec *keyserver; strlist_t list=NULL; int rc,hostlen=1; struct srventry *srvlist=NULL; int srvcount,i; char srvname[MAXDNAME]; /* Parse out the domain */ domain=strrchr(name,'@'); if(!domain) return GPG_ERR_GENERAL; domain++; keyserver=xmalloc_clear(sizeof(struct keyserver_spec)); keyserver->scheme=xstrdup("ldap"); keyserver->host=xmalloc(1); keyserver->host[0]='\0'; snprintf(srvname,MAXDNAME,"_pgpkey-ldap._tcp.%s",domain); FIXME("network related - move to dirmngr or drop the code"); srvcount=getsrv(srvname,&srvlist); for(i=0;ihost=xrealloc(keyserver->host,hostlen); strcat(keyserver->host,srvlist[i].target); if(srvlist[i].port!=389) { char port[7]; hostlen+=6; /* a colon, plus 5 digits (unsigned 16-bit value) */ keyserver->host=xrealloc(keyserver->host,hostlen); snprintf(port,7,":%u",srvlist[i].port); strcat(keyserver->host,port); } strcat(keyserver->host," "); } free(srvlist); /* If all else fails, do the PGP Universal trick of ldap://keys.(domain) */ hostlen+=5+strlen(domain); keyserver->host=xrealloc(keyserver->host,hostlen); strcat(keyserver->host,"keys."); strcat(keyserver->host,domain); append_to_strlist(&list,name); rc = gpg_error (GPG_ERR_NOT_IMPLEMENTED); /*FIXME*/ /* keyserver_work (ctrl, KS_GETNAME, list, NULL, */ /* 0, fpr, fpr_len, keyserver); */ free_strlist(list); free_keyserver_spec(keyserver); return rc; #endif }