diff --git a/sm/decrypt.c b/sm/decrypt.c
index 11c1cf844..a2907f668 100644
--- a/sm/decrypt.c
+++ b/sm/decrypt.c
@@ -1,583 +1,585 @@
/* decrypt.c - Decrypt a message
* Copyright (C) 2001, 2003, 2010 Free Software Foundation, Inc.
*
* This file is part of GnuPG.
*
* GnuPG is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* GnuPG is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see .
*/
#include
#include
#include
#include
#include
#include
#include
#include
#include "gpgsm.h"
#include
#include
#include "keydb.h"
#include "i18n.h"
struct decrypt_filter_parm_s
{
int algo;
int mode;
int blklen;
gcry_cipher_hd_t hd;
char iv[16];
size_t ivlen;
int any_data; /* dod we push anything through the filter at all? */
unsigned char lastblock[16]; /* to strip the padding we have to
keep this one */
char helpblock[16]; /* needed because there is no block buffering in
libgcrypt (yet) */
int helpblocklen;
};
/* Decrypt the session key and fill in the parm structure. The
algo and the IV is expected to be already in PARM. */
static int
prepare_decryption (ctrl_t ctrl, const char *hexkeygrip, const char *desc,
ksba_const_sexp_t enc_val,
struct decrypt_filter_parm_s *parm)
{
char *seskey = NULL;
size_t n, seskeylen;
int rc;
rc = gpgsm_agent_pkdecrypt (ctrl, hexkeygrip, desc, enc_val,
&seskey, &seskeylen);
if (rc)
{
log_error ("error decrypting session key: %s\n", gpg_strerror (rc));
goto leave;
}
if (DBG_CRYPTO)
log_printhex ("pkcs1 encoded session key:", seskey, seskeylen);
n=0;
- if (seskeylen == 24)
+ if (seskeylen == 24 || seskeylen == 16)
{
- /* Smells like a 3-des key. This might happen because a SC has
- already done the unpacking. */
+ /* Smells like a 3-DES or AES-128 key. This might happen
+ * because a SC has already done the unpacking. A better
+ * solution would be to test for this only after we triggered
+ * the GPG_ERR_INV_SESSION_KEY. */
}
else
{
if (n + 7 > seskeylen )
{
rc = gpg_error (GPG_ERR_INV_SESSION_KEY);
goto leave;
}
/* FIXME: Actually the leading zero is required but due to the way
we encode the output in libgcrypt as an MPI we are not able to
encode that leading zero. However, when using a Smartcard we are
doing it the right way and therefore we have to skip the zero. This
should be fixed in gpg-agent of course. */
if (!seskey[n])
n++;
if (seskey[n] != 2 ) /* Wrong block type version. */
{
rc = gpg_error (GPG_ERR_INV_SESSION_KEY);
goto leave;
}
for (n++; n < seskeylen && seskey[n]; n++) /* Skip the random bytes. */
;
n++; /* and the zero byte */
if (n >= seskeylen )
{
rc = gpg_error (GPG_ERR_INV_SESSION_KEY);
goto leave;
}
}
if (DBG_CRYPTO)
log_printhex ("session key:", seskey+n, seskeylen-n);
rc = gcry_cipher_open (&parm->hd, parm->algo, parm->mode, 0);
if (rc)
{
log_error ("error creating decryptor: %s\n", gpg_strerror (rc));
goto leave;
}
rc = gcry_cipher_setkey (parm->hd, seskey+n, seskeylen-n);
if (gpg_err_code (rc) == GPG_ERR_WEAK_KEY)
{
log_info (_("WARNING: message was encrypted with "
"a weak key in the symmetric cipher.\n"));
rc = 0;
}
if (rc)
{
log_error("key setup failed: %s\n", gpg_strerror(rc) );
goto leave;
}
gcry_cipher_setiv (parm->hd, parm->iv, parm->ivlen);
leave:
xfree (seskey);
return rc;
}
/* This function is called by the KSBA writer just before the actual
write is done. The function must take INLEN bytes from INBUF,
decrypt it and store it inoutbuf which has a maximum size of
maxoutlen. The valid bytes in outbuf should be return in outlen.
Due to different buffer sizes or different length of input and
output, it may happen that fewer bytes are processed or fewer bytes
are written. */
static gpg_error_t
decrypt_filter (void *arg,
const void *inbuf, size_t inlen, size_t *inused,
void *outbuf, size_t maxoutlen, size_t *outlen)
{
struct decrypt_filter_parm_s *parm = arg;
int blklen = parm->blklen;
size_t orig_inlen = inlen;
/* fixme: Should we issue an error when we have not seen one full block? */
if (!inlen)
return gpg_error (GPG_ERR_BUG);
if (maxoutlen < 2*parm->blklen)
return gpg_error (GPG_ERR_BUG);
/* Make some space because we will later need an extra block at the end. */
maxoutlen -= blklen;
if (parm->helpblocklen)
{
int i, j;
for (i=parm->helpblocklen,j=0; i < blklen && j < inlen; i++, j++)
parm->helpblock[i] = ((const char*)inbuf)[j];
inlen -= j;
if (blklen > maxoutlen)
return gpg_error (GPG_ERR_BUG);
if (i < blklen)
{
parm->helpblocklen = i;
*outlen = 0;
}
else
{
parm->helpblocklen = 0;
if (parm->any_data)
{
memcpy (outbuf, parm->lastblock, blklen);
*outlen =blklen;
}
else
*outlen = 0;
gcry_cipher_decrypt (parm->hd, parm->lastblock, blklen,
parm->helpblock, blklen);
parm->any_data = 1;
}
*inused = orig_inlen - inlen;
return 0;
}
if (inlen > maxoutlen)
inlen = maxoutlen;
if (inlen % blklen)
{ /* store the remainder away */
parm->helpblocklen = inlen%blklen;
inlen = inlen/blklen*blklen;
memcpy (parm->helpblock, (const char*)inbuf+inlen, parm->helpblocklen);
}
*inused = inlen + parm->helpblocklen;
if (inlen)
{
assert (inlen >= blklen);
if (parm->any_data)
{
gcry_cipher_decrypt (parm->hd, (char*)outbuf+blklen, inlen,
inbuf, inlen);
memcpy (outbuf, parm->lastblock, blklen);
memcpy (parm->lastblock,(char*)outbuf+inlen, blklen);
*outlen = inlen;
}
else
{
gcry_cipher_decrypt (parm->hd, outbuf, inlen, inbuf, inlen);
memcpy (parm->lastblock, (char*)outbuf+inlen-blklen, blklen);
*outlen = inlen - blklen;
parm->any_data = 1;
}
}
else
*outlen = 0;
return 0;
}
/* Perform a decrypt operation. */
int
gpgsm_decrypt (ctrl_t ctrl, int in_fd, estream_t out_fp)
{
int rc;
Base64Context b64reader = NULL;
Base64Context b64writer = NULL;
ksba_reader_t reader;
ksba_writer_t writer;
ksba_cms_t cms = NULL;
ksba_stop_reason_t stopreason;
KEYDB_HANDLE kh;
int recp;
estream_t in_fp = NULL;
struct decrypt_filter_parm_s dfparm;
memset (&dfparm, 0, sizeof dfparm);
audit_set_type (ctrl->audit, AUDIT_TYPE_DECRYPT);
kh = keydb_new ();
if (!kh)
{
log_error (_("failed to allocate keyDB handle\n"));
rc = gpg_error (GPG_ERR_GENERAL);
goto leave;
}
in_fp = es_fdopen_nc (in_fd, "rb");
if (!in_fp)
{
rc = gpg_error_from_syserror ();
log_error ("fdopen() failed: %s\n", strerror (errno));
goto leave;
}
rc = gpgsm_create_reader (&b64reader, ctrl, in_fp, 0, &reader);
if (rc)
{
log_error ("can't create reader: %s\n", gpg_strerror (rc));
goto leave;
}
rc = gpgsm_create_writer (&b64writer, ctrl, out_fp, &writer);
if (rc)
{
log_error ("can't create writer: %s\n", gpg_strerror (rc));
goto leave;
}
rc = ksba_cms_new (&cms);
if (rc)
goto leave;
rc = ksba_cms_set_reader_writer (cms, reader, writer);
if (rc)
{
log_debug ("ksba_cms_set_reader_writer failed: %s\n",
gpg_strerror (rc));
goto leave;
}
audit_log (ctrl->audit, AUDIT_SETUP_READY);
/* Parser loop. */
do
{
rc = ksba_cms_parse (cms, &stopreason);
if (rc)
{
log_debug ("ksba_cms_parse failed: %s\n", gpg_strerror (rc));
goto leave;
}
if (stopreason == KSBA_SR_BEGIN_DATA
|| stopreason == KSBA_SR_DETACHED_DATA)
{
int algo, mode;
const char *algoid;
int any_key = 0;
audit_log (ctrl->audit, AUDIT_GOT_DATA);
algoid = ksba_cms_get_content_oid (cms, 2/* encryption algo*/);
algo = gcry_cipher_map_name (algoid);
mode = gcry_cipher_mode_from_oid (algoid);
if (!algo || !mode)
{
rc = gpg_error (GPG_ERR_UNSUPPORTED_ALGORITHM);
log_error ("unsupported algorithm '%s'\n", algoid? algoid:"?");
if (algoid && !strcmp (algoid, "1.2.840.113549.3.2"))
log_info (_("(this is the RC2 algorithm)\n"));
else if (!algoid)
log_info (_("(this does not seem to be an encrypted"
" message)\n"));
{
char numbuf[50];
sprintf (numbuf, "%d", rc);
gpgsm_status2 (ctrl, STATUS_ERROR, "decrypt.algorithm",
numbuf, algoid?algoid:"?", NULL);
audit_log_s (ctrl->audit, AUDIT_BAD_DATA_CIPHER_ALGO, algoid);
}
/* If it seems that this is not an encrypted message we
return a more sensible error code. */
if (!algoid)
rc = gpg_error (GPG_ERR_NO_DATA);
goto leave;
}
audit_log_i (ctrl->audit, AUDIT_DATA_CIPHER_ALGO, algo);
dfparm.algo = algo;
dfparm.mode = mode;
dfparm.blklen = gcry_cipher_get_algo_blklen (algo);
if (dfparm.blklen > sizeof (dfparm.helpblock))
return gpg_error (GPG_ERR_BUG);
rc = ksba_cms_get_content_enc_iv (cms,
dfparm.iv,
sizeof (dfparm.iv),
&dfparm.ivlen);
if (rc)
{
log_error ("error getting IV: %s\n", gpg_strerror (rc));
goto leave;
}
for (recp=0; !any_key; recp++)
{
char *issuer;
ksba_sexp_t serial;
ksba_sexp_t enc_val;
char *hexkeygrip = NULL;
char *desc = NULL;
char kidbuf[16+1];
*kidbuf = 0;
rc = ksba_cms_get_issuer_serial (cms, recp, &issuer, &serial);
if (rc == -1 && recp)
break; /* no more recipients */
audit_log_i (ctrl->audit, AUDIT_NEW_RECP, recp);
if (rc)
log_error ("recp %d - error getting info: %s\n",
recp, gpg_strerror (rc));
else
{
ksba_cert_t cert = NULL;
log_debug ("recp %d - issuer: '%s'\n",
recp, issuer? issuer:"[NONE]");
log_debug ("recp %d - serial: ", recp);
gpgsm_dump_serial (serial);
log_printf ("\n");
if (ctrl->audit)
{
char *tmpstr = gpgsm_format_sn_issuer (serial, issuer);
audit_log_s (ctrl->audit, AUDIT_RECP_NAME, tmpstr);
xfree (tmpstr);
}
keydb_search_reset (kh);
rc = keydb_search_issuer_sn (ctrl, kh, issuer, serial);
if (rc)
{
log_error ("failed to find the certificate: %s\n",
gpg_strerror(rc));
goto oops;
}
rc = keydb_get_cert (kh, &cert);
if (rc)
{
log_error ("failed to get cert: %s\n", gpg_strerror (rc));
goto oops;
}
/* Print the ENC_TO status line. Note that we can
do so only if we have the certificate. This is
in contrast to gpg where the keyID is commonly
included in the encrypted messages. It is too
cumbersome to retrieve the used algorithm, thus
we don't print it for now. We also record the
keyid for later use. */
{
unsigned long kid[2];
kid[0] = gpgsm_get_short_fingerprint (cert, kid+1);
snprintf (kidbuf, sizeof kidbuf, "%08lX%08lX",
kid[1], kid[0]);
gpgsm_status2 (ctrl, STATUS_ENC_TO,
kidbuf, "0", "0", NULL);
}
/* Put the certificate into the audit log. */
audit_log_cert (ctrl->audit, AUDIT_SAVE_CERT, cert, 0);
/* Just in case there is a problem with the own
certificate we print this message - should never
happen of course */
rc = gpgsm_cert_use_decrypt_p (cert);
if (rc)
{
char numbuf[50];
sprintf (numbuf, "%d", rc);
gpgsm_status2 (ctrl, STATUS_ERROR, "decrypt.keyusage",
numbuf, NULL);
rc = 0;
}
hexkeygrip = gpgsm_get_keygrip_hexstring (cert);
desc = gpgsm_format_keydesc (cert);
oops:
xfree (issuer);
xfree (serial);
ksba_cert_release (cert);
}
if (!hexkeygrip)
;
else if (!(enc_val = ksba_cms_get_enc_val (cms, recp)))
log_error ("recp %d - error getting encrypted session key\n",
recp);
else
{
rc = prepare_decryption (ctrl,
hexkeygrip, desc, enc_val, &dfparm);
xfree (enc_val);
if (rc)
{
log_info ("decrypting session key failed: %s\n",
gpg_strerror (rc));
if (gpg_err_code (rc) == GPG_ERR_NO_SECKEY && *kidbuf)
gpgsm_status2 (ctrl, STATUS_NO_SECKEY, kidbuf, NULL);
}
else
{ /* setup the bulk decrypter */
any_key = 1;
ksba_writer_set_filter (writer,
decrypt_filter,
&dfparm);
}
audit_log_ok (ctrl->audit, AUDIT_RECP_RESULT, rc);
}
xfree (hexkeygrip);
xfree (desc);
}
/* If we write an audit log add the unused recipients to the
log as well. */
if (ctrl->audit && any_key)
{
for (;; recp++)
{
char *issuer;
ksba_sexp_t serial;
int tmp_rc;
tmp_rc = ksba_cms_get_issuer_serial (cms, recp,
&issuer, &serial);
if (tmp_rc == -1)
break; /* no more recipients */
audit_log_i (ctrl->audit, AUDIT_NEW_RECP, recp);
if (tmp_rc)
log_error ("recp %d - error getting info: %s\n",
recp, gpg_strerror (rc));
else
{
char *tmpstr = gpgsm_format_sn_issuer (serial, issuer);
audit_log_s (ctrl->audit, AUDIT_RECP_NAME, tmpstr);
xfree (tmpstr);
xfree (issuer);
xfree (serial);
}
}
}
if (!any_key)
{
rc = gpg_error (GPG_ERR_NO_SECKEY);
goto leave;
}
}
else if (stopreason == KSBA_SR_END_DATA)
{
ksba_writer_set_filter (writer, NULL, NULL);
if (dfparm.any_data)
{ /* write the last block with padding removed */
int i, npadding = dfparm.lastblock[dfparm.blklen-1];
if (!npadding || npadding > dfparm.blklen)
{
log_error ("invalid padding with value %d\n", npadding);
rc = gpg_error (GPG_ERR_INV_DATA);
goto leave;
}
rc = ksba_writer_write (writer,
dfparm.lastblock,
dfparm.blklen - npadding);
if (rc)
goto leave;
for (i=dfparm.blklen - npadding; i < dfparm.blklen; i++)
{
if (dfparm.lastblock[i] != npadding)
{
log_error ("inconsistent padding\n");
rc = gpg_error (GPG_ERR_INV_DATA);
goto leave;
}
}
}
}
}
while (stopreason != KSBA_SR_READY);
rc = gpgsm_finish_writer (b64writer);
if (rc)
{
log_error ("write failed: %s\n", gpg_strerror (rc));
goto leave;
}
gpgsm_status (ctrl, STATUS_DECRYPTION_OKAY, NULL);
leave:
audit_log_ok (ctrl->audit, AUDIT_DECRYPTION_RESULT, rc);
if (rc)
{
gpgsm_status (ctrl, STATUS_DECRYPTION_FAILED, NULL);
log_error ("message decryption failed: %s <%s>\n",
gpg_strerror (rc), gpg_strsource (rc));
}
ksba_cms_release (cms);
gpgsm_destroy_reader (b64reader);
gpgsm_destroy_writer (b64writer);
keydb_release (kh);
es_fclose (in_fp);
if (dfparm.hd)
gcry_cipher_close (dfparm.hd);
return rc;
}