Page MenuHome GnuPG
Files F25703720

No OneTemporary
Actions

View Options

This document is not UTF8. It was detected as Shift JIS and converted to UTF8 for display.
diff --git a/ChangeLog b/ChangeLog
index a44a4b30a..232c01061 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,2079 +1,2085 @@
+2007-04-16 Werner Koch <wk@g10code.com>
+
+ * acinclude.m4: Fix last change. Make test self-conatined by
+ checking for sysconf and getpagesize. Remove indentation for the
+ sake of broken C-89 cpp.
+
2007-04-16 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add a HAVE_SHM conditional.
* acinclude.m4: Use sysconf() if available to avoid a false
positive on HAVE_BROKEN_MLOCK when checking for page size.
* configure.ac: Check for sysconf.
2007-04-15 David Shaw <dshaw@jabberwocky.com>
* configure.ac: QNX puts resolver functions in libsocket. From
Sean Boudreau.
2007-03-05 Werner Koch <wk@g10code.com>
Released 1.4.7.
2007-03-04 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note --allow-multiple-messages.
2006-12-21 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Only check for libusb if we're building with card
support. Noted by Gilles Espinasse.
2006-12-11 Werner Koch <wk@g10code.com>
* Makefile.am (DISTCLEANFILES): Removed g10defs.h.
* configure.ac (AC_CONFIG_COMMANDS): Removed creation of
g10defs.h.
(AH_BOTTOM): Moved stuff from g10defs.h to config.h.
2006-12-07 David Shaw <dshaw@jabberwocky.com>
* configure.ac: AM_CONDITIONAL must not be used inside an if/then.
2006-12-07 Werner Koch <wk@g10code.com>
* configure.ac: Remove GNUPG_DATADIR for non-W32 systems.
2006-12-06 Werner Koch <wk@g10code.com>
Released 1.4.6.
2006-12-04 Werner Koch <wk@g10code.com>
* README: Add hint on hjow to set CC_FOR_BUILD.
* configure.ac (CC_FOR_BUILD): New.
2006-12-02 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note the CVE for bug#728, --s2k-count,
--passphrase-repeat, and the OpenSSL exception.
2006-11-29 Werner Koch <wk@g10code.com>
Released 1.4.6rc1.
2006-11-05 David Shaw <dshaw@jabberwocky.com>
* configure.ac: --enable-minimal leaves out gettext and all
resolver functions (SRV, PKA, & CERT).
2006-10-02 Werner Koch <wk@g10code.com>
* acinclude.m4 (GNUPG_SYS_SYMBOL_UNDERSCORE): Add case for mingw32
and allow setting the variable on the command line. Fixes bug 518.
Also use HOST instead of TARGET.
* README: Add information about the forthcoming GnuPG 2.0.
* configure.ac (AB_INIT): New.
2006-09-28 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Move strsep to AC_REPLACE_FUNCS so it will end up
in libcompat.
2006-08-01 Werner Koch <wk@g10code.com>
Released 1.4.5.
2006-07-31 Werner Koch <wk@g10code.com>
* README: Updated info on the key used to sign the tarball.
2006-07-28 Werner Koch <wk@g10code.com>
Released 1.4.5rc1.
2006-07-08 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Fix resolver autoconf code so it works (fails)
properly with uClibc.
2006-06-25 Werner Koch <wk@g10code.com>
Released 1.4.4.
2006-05-23 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add --disable-optimization. This is handy for
debugging so the compiler doesn't rearrange things and eliminate
variables.
2006-05-22 Marcus Brinkmann <marcus@g10code.de>
* configure.ac: Remove check for noexecstack and invoke
CL_AS_NOEXECSTACK instead.
2006-05-16 Werner Koch <wk@g10code.com>
* README: Removed note for OSF5 as this is the default now.
Reported by Joerg Honegger.
* configure.ac [osf5]: Fixed warning name to ptrmismatch1.
2006-04-27 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note SHA-224 and DSA2.
* configure.ac: Remove --enable-old-keyserver-helpers. Comment
out --enable-m-guard for now.
2006-04-12 Werner Koch <wk@g10code.com>
* configure.ac: Print version at end of run.
(svn_revision): Posix adjustment.
2006-04-07 Werner Koch <wk@g10code.com>
* configure.ac: Use new method to include the SVN revison. Now it
is the actual global revision number.
2006-04-04 Werner Koch <wk@g10code.com>
* NEWS: Fixed old news entry to point to rfc4398 which has been
published just before 1.4.3.
2006-04-03 Werner Koch <wk@g10code.com>
Released 1.4.3.
2006-03-30 David Shaw <dshaw@jabberwocky.com>
* README: Some more notes about building fat binaries.
2006-03-24 David Shaw <dshaw@jabberwocky.com>
* README: Missing some instructions on building a fat binary.
2006-03-20 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Improved --disable-endian-check that doesn't
involve changing #ifdefs in the rest of the code.
2006-03-19 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add --disable-endian-check for building fat
binaries on OSX.
* README: Add note on how to build a fat binary on OSX.
2006-03-17 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Allow the DNS stuff to work on OSX by trying the
Apple-specific BIND_8_COMPAT.
2006-03-09 Werner Koch <wk@g10code.com>
Released 1.4.3rc2.
2006-03-07 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note CERT retrieval. Tweak PKA and backsig language to
match current code.
* NEWS: Note --auto-key-locate and that keyservers can handle
binary data now.
2006-03-01 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Fix accidental enabling of SHA-384/512. Noted by
Nelson H. F. Beebe.
2006-02-18 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Try linking the UINT64_C test program (rather than
just compiling it) as UINT64_C looks like a (missing) function,
causing a false positive. Noted by Claus Assmann.
2006-02-14 Werner Koch <wk@gnupg.org>
Released 1.4.3rc1.
2006-02-09 Werner Koch <wk@g10code.com>
* configure.ac: Check for fcntl and ftruncate.
2006-01-22 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add define for EXEEXT so we can find keyserver
helpers on systems that use extensions.
2005-12-23 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add switch for DNS CERT.
2005-12-22 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Split PKA checking off from DNS SRV checking.
Currently PKA is only enabled if HTTP or HKP is enabled which is
not necessary.
2005-12-08 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note --fetch-keys.
2005-12-06 David Shaw <dshaw@jabberwocky.com>
* configure.ac: UINT64_C test needs #include <inttypes.h>.
* configure.ac: Some cleanup so we don't build files that are
completely ifdeffed out. This causes a warning on Sun's cc. Do
sha512.c and the internal regex code as well for consistency.
2005-11-17 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note backsigs, the xxxxx-clean options, and the
xxxxx-minimal options.
2005-11-02 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Check for a getpagesize() declaration.
2005-10-14 David Shaw <dshaw@jabberwocky.com>
* NEWS: Clarify the cURL keyserver changes, and add a note about
gpg-zip.
* configure.ac: Remove the backsig configure options since this is
all done at runtime now.
2005-10-11 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Did some backsig testing with the PGP folks. All
is well, so I'm turning generation of backsigs on for new keys.
Checking for backsigs on verification is still off.
2005-10-05 Werner Koch <wk@g10code.com>
* configure.ac: Changed identification file name to g10/gpg.c
2005-10-02 Marcus Brinkmann <marcus@g10code.de>
* configure.ac [!$try_gettext]: Invoke AM_PO_SUBDIRS.
2005-08-31 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Check for getpwnam, getpwuid, and pwd.h.
2005-08-09 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Remove hardcoded -I and -L for /usr/local on
FreeBSD.
2005-08-04 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Call GNUPG_CHECK_USTAR and generate tools/gpg-zip.
2005-07-28 Werner Koch <wk@g10code.com>
* configure.ac (USE_DNS_PKA): Define in addition to USE_DNS_SRV.
2005-07-27 Werner Koch <wk@g10code.com>
Replaced in all directories all calls to m_free, m_alloc,
m_realloc, m_strdup by calls to xfoo functions. This is to ease
porting to gnupg 1.9.
* README.CVS: Renamed to README.SVN.
2005-07-26 David Shaw <dshaw@jabberwocky.com>
* NEWS, configure.ac: Switch over to using curl or fake-curl by
default. Add --enable-old-keyserver-helpers to not use curl.
2005-07-26 Werner Koch <wk@g10code.com>
Released 1.4.2.
2005-07-20 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add a define for FAKE_CURL.
2005-07-19 Werner Koch <wk@g10code.com>
* configure.ac [W32]: Always set DISABLE_KEYSERVER_PATH.
2005-06-21 Werner Koch <wk@g10code.com>
Released 1.4.2rc2.
2005-06-20 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note key cleaning commands.
2005-06-13 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add check for no-pointer-sign warning keyword, and
disable. This is gcc4 specific.
2005-05-31 Werner Koch <wk@g10code.com>
Released 1.4.2rc1.
* README: Add a note on GnuPG 1.9.
Updated FSF address in all files.
2005-05-26 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note command completion and the new curl-based HKP helper.
2005-04-16 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Remove --disable-old-hkp - use new HKP handler for
--with-libcurl or --enable-fake-curl.
* configure.ac: Add --disable-old-hkp option that can be used
along with --with-libcurl to build the curl version of HKP.
2005-04-12 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Check for memrchr()
2005-03-31 Werner Koch <wk@g10code.com>
* configure.ac: New option --disable-agent-support. Define
ENABLE_AGENT_SUPPORT as AC_DEFINE and AM_CONDITIONAL.
Disable support for card and agent with --enable-minimal.
(AC_REPLACE_FUNCS): Add isascii.
(g10defs.h): Define PATHSEP_C and PATHSEP_S.
* README: Changed the instruction on how to verify a signature to
show a .sig extension and not the .asc we used to use ages ago.
2005-03-16 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Move the LDAP detecting code to m4/ldap.m4.
2005-03-15 Werner Koch <wk@g10code.com>
Released 1.4.1.
2005-03-11 Werner Koch <wk@g10code.com>
* configure.ac: New option --enable-noexecstack.
2005-02-16 Werner Koch <wk@g10code.com>
Released 1.4.1rc2.
2005-02-11 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add --enable-fake-curl option to help test no-curl
HTTP.
* NEWS: Note Mister/Zuccherato CFB countermeasures.
2005-02-04 Werner Koch <wk@g10code.com>
* configure.ac (GNUPG_CHECK_GNUMAKE): Removed. Not needed for
decent automakes.
2005-02-03 David Shaw <dshaw@jabberwocky.com>
* NEWS: Fix typo.
2005-02-03 Werner Koch <wk@g10code.com>
Released 1.4.1rc1.
2005-01-22 David Shaw <dshaw@grover.jabberwocky.com>
* configure.ac: Define FTPS flag if we're using curl, and FTPS is
available.
* README: Fix some typos (noted by Norihiko Murase), update to
1.4.1, and tweak some descriptions.
* NEWS: Note FTPS.
2005-01-18 Werner Koch <wk@g10code.com>
* configure.ac (HAVE_W32_SYSTEM): Define it.
2005-01-18 David Shaw <dshaw@grover.jabberwocky.com>
* NEWS: Note --rfc2440-text import/export-unusable-sigs and
gpgkeys_curl.
* configure.ac: gpgkeys_mailto is disabled by default. Define
HTTPS flag if we're using curl, and HTTPS is available.
2005-01-17 Werner Koch <wk@g10code.com>
* README: Updated for SHA1 checksums.
* configure.ac: Make --without-included-zlib work as
expected. Reported by Norihiko Murase. Same for
--without-included-regex.
2005-01-03 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Use new GNUPG_CHECK_LIBUSB macro.
2004-12-28 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Better implementation for the SRV check. We don't
need to actually check all the header files individually since the
SRV test compile uses them together.
2004-12-24 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Use new LIBCURL_CHECK_CONFIG macro for
all libcurl stuff. This simplifies, and we don't need the
automake conditional stuff any longer.
2004-12-22 David Shaw <dshaw@jabberwocky.com>
* configure.ac: --enable-ftp is on by default, --with-libcurl is
off by default. If we have neither of --enable-ftp or
--enable-http, don't even check for curl.
2004-12-21 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add check for --enable-ftp. It is disabled by
default for now.
2004-12-18 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Call the new GNUPG_CHECK_READLINE macro for
readline stuff.
2004-12-17 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add a --with-ldap=DIR so people can add to the
search path.
2004-12-16 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Check for arpa/nameser.h.
2004-12-16 Werner Koch <wk@g10code.com>
* THANKS: Added John Clizbe for help testing the 1.4.0a W32
binary.
2004-12-16 Werner Koch <wk@g10code.com>
Released 1.4.0.
2004-12-14 Werner Koch <wk@g10code.com>
Released 1.3.93.
* Makefile.am (AUTOMAKE_OPTIONS): Add filename-length-max=99.
2004-11-06 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Autodetect wldap32 on Windoze.
2004-11-04 David Shaw <dshaw@jabberwocky.com>
* README, configure.ac: Add --enable-backsigs to enable the
experimental backsigs code.
2004-11-04 Werner Koch <wk@g10code.com>
* AUTHORS: Use Maxim Britov. I am not that accustomed to the
Russian way of writing names.
2004-10-28 Werner Koch <wk@g10code.com>
Released 1.3.92.
2004-10-26 Werner Koch <wk@g10code.com>
* configure.ac: New option --disable-gnupg-iconv, define
USE_GNUPG_ICONV.
(AC_CANONICAL_TARGET): Replaced by AC_CANONICAL_HOST. Changed all
reference to TARGET to HOST. Made sure that i586-mingw32msvc gets
detected as mingw32.
(UNIT64_C): Don't include inttype.h uncoditional but use a test to
ensure that it gets into conftest.h.
(AH_TOP): New. Prevent double inclusion of config.h.
2004-10-21 David Shaw <dshaw@jabberwocky.com>
* acinclude.m4: aclocal 1.9 wants quoting on AC_DEFUN arguments.
2004-10-21 Werner Koch <wk@g10code.com>
* configure.ac: Remove the check for asprintf
2004-10-15 Werner Koch <wk@g10code.com>
Released 1.3.91.
* README: Mentioned --enable-selinux-support.
2004-10-15 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note gpgkeys_finger, keyserver timeouts, and the direct
trust model.
2004-10-15 Werner Koch <wk@g10code.com>
* Makefile.am (DISTCHECK_CONFIGURE_FLAGS): New.
(AUTOMAKE_OPTIONS): New.
* configure.ac: Check whether vasprintf needs a replacement.
2004-10-13 Werner Koch <wk@g10code.com>
* configure.ac: Actually name the option --disable-finger and not
http. Add option --enable-selinux-support.
2004-10-11 Werner Koch <wk@g10code.com>
* configure.ac: New option --disable-finger.
2004-09-17 Werner Koch <wk@g10code.com>
* configure.ac: Don't check for usb_create_match or
use_get_string_simple anymore.
2004-09-15 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Give warning when using capabilities. Check for
usb_get_string_simple for old libusb reasons.
2004-09-10 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note HTTP basic auth.
* configure.ac: Check for usb_get_busses since very old stable
libusb doesn't have it.
2004-09-09 Werner Koch <wk@g10code.com>
* README: Doc --disable-card-support and --without-readline.
* configure.ac: Check for readline. Make enable-card-support the
default. New option --without-readline. Allow the use of either
the development or the stable libusb.
2004-07-27 Werner Koch <wk@g10code.de>
* configure.ac (AM_GNU_GETTEXT_VERSION): New.
(min_automake_version): New.
2004-05-24 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Try for wldap32 on Win32 platforms.
2004-05-22 Werner Koch <wk@gnupg.org>
Releases 1.3.6.
2004-05-21 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note --sig-keyserver-url and the ability to use a
preferred keyserver in a regular data sig to fetch the signing
key.
* configure.ac: Replacement function for timegm(). No need to
check for setenv() any longer.
2004-05-20 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note HTTP key fetching.
* README: Update version and note that HKP is no longer build in.
* configure.ac: Handle --disable-http and other code to properly
build gpgkeys_http.
2004-05-19 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note the addition of preferred keyserver support,
--ask-cert-level, --keyid-format, and the removal of
show-long-keyids, the quasi-1991 partial length encoding,
--export-all, and include-non-rfc.
* acinclude.m4 (GNUPG_SYS_NM_PARSE): Remove a leftover slash in a
sed expression.
2004-05-01 Werner Koch <wk@gnupg.org>
* acinclude.m4 (ac_pipe_works): Fixed BRE syntax \? -> \{0,1\}.
Reported by Todd Vierling.
2004-02-26 Werner Koch <wk@gnupg.org>
Released 1.3.5.
2004-02-25 David Shaw <dshaw@jabberwocky.com>
* README: Update copyright.
* NEWS: Note --max-output, --list-config, --min-cert-level, AIX
fix, new http-proxy keyserver-option, new LDAP server code, TLS,
LDAPS, and --show-session-key with --symmetric.
2004-02-20 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Check for timegm(). Replacement functions for
setenv() and unsetenv().
2004-02-19 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Check for ln -s and add GPGKEYS_LDAP conditional,
both for making gpgkeys_ldaps symlink to gpgkeys_ldap.
* configure.ac: Simplify the LDAP checking code since OpenLDAP is
far more mature these days and dependencies are cleaner. Add
checks for ldap_set_option and ldap_start_tls_s.
2004-01-27 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note --enable-key-cache, the OpenBSD/i386 and HPPA fixes,
and Elgamal removal.
* README, configure.ac: Add --enable-key-cache=SIZE configure
option. This sets the key/uid cache size. Default is 4096.
2004-01-11 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Include stdio.h when checking for bzlib.h. Solaris
9 has a very old bzip2 library and we can at least guarantee that
it won't fail because of the lack of stdio.h.
* THANKS: Added Phong Nguyen, who found the Elgamal signing key
problem.
2003-12-23 Werner Koch <wk@gnupg.org>
* configure.ac: Use -Wformat-nonliteral in maintainer-mode.
2003-11-30 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note --disable-rsa.
* configure.ac: Add --disable-rsa.
* README: Add --with-zlib, --with-bzip2, --without-bzip2,
--disable-rsa, and --enable-minimal. Update gettext version.
* README: Update version number. Add BZIP2. Remove Elgamal
sign+encrypt.
2003-11-27 Werner Koch <wk@gnupg.org>
Released 1.3.4.
2003-11-27 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note that we won't encrypt to an Elgamal sign+encrypt key
any longer.
* configure.ac: Use MSG_NOTICE instead of MSG_WARN for less
serious notifications.
* NEWS: I meant "less" not "more".
2003-11-12 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note BZIP2.
* configure.ac: Make sure that the resolver API actually compiles,
and not just that the right functions exist.
2003-10-30 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Locate libbz2 for bzip2 compression support.
2003-10-26 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note --symmetric --encrypt and the improved config file
search.
* configure.ac: Add SAFE_VERSION_DOT and SAFE_VERSION_DASH.
2003-10-25 Werner Koch <wk@gnupg.org>
* Makefile.am (SUBDIRS): Add intl.
(ACLOCAL_AMFLAGS): New variable.
(EXTRA_DIST): Add scripts/config.rpath.
* configure.ac (AC_CONFIG_FILES): Add po/Makefile.in,
(AL_LINGUAS): Removed.
2003-10-24 David Shaw <dshaw@jabberwocky.com>
* configure.ac (DLLIBS): Work properly on platforms where dlopen
and friends are in libc instead of libdl.
2003-10-24 Werner Koch <wk@gnupg.org>
* configure.ac (DLLIBS): Fixed last change.
2003-10-23 Werner Koch <wk@gnupg.org>
* configure.ac (DLLIBS): Do not include -ldl in the mingw32 case.
2003-10-21 Werner Koch <wk@gnupg.org>
* configure.ac (PRINTABLE_OS_NAME): Remove special case for The
Hurd; Robert Millan reported that the uname test is now
sufficient.
2003-10-16 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Include -ldl when card support is used.
2003-10-10 Werner Koch <wk@gnupg.org>
Release 1.3.3.
2003-10-09 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note multiple Comment: support and --sig-keyserver-url.
2003-10-01 Werner Koch <wk@gnupg.org>
* configure.ac (AH_BOTTOM): Define GNUPG_MAJOR_VERSION.
(ENABLE_CARD_SUPPORT): Define as automake conditional.
2003-09-30 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note that SHA-256 is read-write now, that TIGER/192 is no
more, that revoked and expired uids are skipped in -r, and that
--no-mangle-dos-filenames is now the default.
2003-09-27 Werner Koch <wk@gnupg.org>
* configure.ac (LIBUSB_LIBS,HAVE_LIBUSB): Check for Libusb.
(--enable-card-support): New.
2003-09-04 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Drop TIGER/192 support. Check for UINT64_C to go
along with uint64_t.
2003-09-01 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note --list-options, --verify-options, the deprecation of
--show-photos, --show-policy-url, --show-notation, and
--show-keyring, and getting the signer's fingerprint in sig
records.
2003-08-28 David Shaw <dshaw@jabberwocky.com>
* AUTHORS, THANKS: Updates from stable.
2003-08-25 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note %g and %p, the "tru" --with-colons record, and the
REVKEYSIG --status-fd tag.
* README: Add a note about the SunOS symbol underscore problem and
how to fix it. Note problem with gcc < 2.96 and non-gnu as.
2003-08-24 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Check for getaddrinfo. Don't bother to check for
EGD libs since we need to have the netlibs regardless because of
the agent socket.
2003-07-10 David Shaw <dshaw@jabberwocky.com>
* configure.ac: configure.ac: Check for sigset_t and struct
sigaction. This is for Forte c89 on Solaris which seems to define
only the function call half of the two pairs by default.
* THANKS: Updates from stable.
* configure.ac: Include wsock32 in W32LIBS. This is different
from NETLIBS so we don't need to force other platforms to pull in
the netlibs when they aren't actually needed.
* NEWS: Note portability changes.
2003-06-03 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Define SAFE_VERSION so that RISCOS can override it
and remove invalid chars.
2003-05-30 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Put wsock32 in NETLIBS. Put zlib in ZLIBS. Put
dl in DLLIBS. Check for getopt.h if available. Look for getopt()
in libiberty if libc doesn't have it. Enable GPGKEYS_HKP after
AC_PROG_CC so that any needed extension (i.e. ".exe") is defined.
2003-05-27 Werner Koch <wk@gnupg.org>
Released 1.3.2.
2003-05-26 David Shaw <dshaw@jabberwocky.com>
* NEWS: Document --gnupg and the deprecation of --no-openpgp and
--no-pgpX.
2003-05-24 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Edit preprocessor instructions in g10defs.h to
remove whitespace before the '#'. This is not required by C89,
but there are some compilers out there that don't like it.
2003-05-11 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Remove some stuff no longer needed with newer
autoconf. Use AC_GNU_SOURCE instead of defining _GNU_SOURCE
manually. Add check for strchr() for gettext. Add "ngettext"
check for gettext, since that check supposedly implies a check for
bind_textdomain_codeset. Add check for times() for random.c. Fix
URL for EGD. Make --enable-old-tiger match the stable branch as a
separate item.
* NEWS: "OpenPGP" trust model is now "PGP". Add note about TIGER
being dropped from OpenPGP. Note trust bug fix.
* README: Fix all URLs to point to the right place in the
reorganized gnupg.org web pages. Some minor language fixes.
2003-04-27 David Shaw <dshaw@jabberwocky.com>
* BUGS: Fix bug reporting URL.
* NEWS: Add sig version, pk algo, hash algo, and sig class to
VALIDSIG. Add notes about SRV, the "subkeyid!" syntax, configure
options to disable various algorithms, and the ability to change
the keyserver no-modify flag.
2003-04-23 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Big warning that TIGER/192 is being removed from
the standard, and make it disabled by default.
* README: Put back proper copyright line. Remove mention of
TIGER/192.
2003-04-15 Werner Koch <wk@gnupg.org>
* configure.ac (HAVE_DOSISH_SYSTEM): New automake conditional.
* acinclude.m4 (GNUPG_CHECK_ENDIAN): Fixed quoting of r.e. using
quadrigraphs.
2003-04-08 Werner Koch <wk@gnupg.org>
* Makefile.am (EXTRA_DIST): Add autogen.sh wrapper.
2003-04-07 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Use much more accurate method to determine whether
DNS SRV is usable.
* README: Document the various --disable-xxx switches, and add a
note about existing keys that may use one of the missing ciphers
as a preference. Update copyright date.
* NEWS: Add note about SHA-256/384/512.
* acinclude.m4: Fix URL to faqprog.pl.
2003-03-24 Werner Koch <wk@gnupg.org>
* acinclude.m4 (GNUPG_CHECK_ENDIAN): When crosscompiling assume
little only for Intel CPUs.
* configure.ac: Check for ranlib and ar. This is required for
cross compiling.
2003-03-11 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Look for res_query so we can use DNS SRV, and add
--disable-dns-srv to disable it.
2003-03-04 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Define @CAPLIBS@ to link in -lcap if we are using
capabilities.
2003-02-22 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add --disable-idea for IDEA. Note that disabling
IDEA disables both the real IDEA and the possibility of using the
IDEA loadable module. Remove the --disable-dynload option since
it is no longer meaningful (it is only used if idea-stub is used).
2003-02-21 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add --disable-xxx options for CAST5, BLOWFISH, AES
(all), TWOFISH, TIGER192, SHA256, and SHA384/512. Add a
--enable-minimal that disables all of them as well as
--disable-exec.
2003-02-11 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Do not set GNUPG_LIBEXECDIR in ./configure, so
that makefiles can override it. Verify that we have a 64-bit type
before building tiger.c or sha512.c. Add uint64_t as a possible
64-bit type.
2003-02-02 David Shaw <dshaw@jabberwocky.com>
* NEWS: Add notes about disabled keys, trustdb tweaks, and
"revuid".
2002-12-27 David Shaw <dshaw@jabberwocky.com>
* NEWS: Add note about convert-from-106 script.
2002-11-25 David Shaw <dshaw@jabberwocky.com>
* NEWS: Add notes about notation names and '@', the --trust-model
option, default algorithms from --personal-xxxx,
--primary-keyring, changes with --s2k-digest-algo, the new
anonymous recipient improvements, and non-optimized memory wiping.
2002-11-13 David Shaw <dshaw@jabberwocky.com>
* THANKS: Changes from stable branch.
* configure.ac: Check for ctermid(). From Werner on stable
branch.
* configure.ac (GPGKEYS_LDAP,GPGKEYS_HKP): Add $EXEEXT. From
Werner on stable branch.
* configure.ac (try_gettext): Remove special case for cygwin.
This removes all the DOS specific macros and let Cygwin work like
a real OS. Needs a couple of changes elsewhere but after all,
GnuPG presents itself much more like a Posix program and can be
used in a full Cygwin environment; e.g. used along with mutt.
Changes suggested by Volker Quetschke. From Werner on stable
branch.
* acinclude.m4 (GNUPG_SYS_NM_PARSE): Allow for underscore in test
symbols. Useful for Cygwin builds.
(GNUPG_SYS_SYMBOL_UNDERSCORE): Don't hardwire to yes for Cygwin.
From Werner on stable branch.
* README: Add an installation note for Darwin 6.1. From Werner on
stable branch.
2002-11-12 Werner Koch <wk@gnupg.org>
Released 1.3.1
2002-11-03 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note trust signature support,
--hidden-encrypt-to/--hidden-recipient, and long algorithm name
support everywhere.
2002-10-31 David Shaw <dshaw@jabberwocky.com>
* Makefile.am: Put gnupg.spec in the root directory so rpm -ta
works.
* configure.ac: Add a check for volatile.
2002-10-29 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add --disable-regex in case some platform just
can't handle the regex stuff. This means they can't fully handle
trust sigs with an attached regex either.
2002-10-19 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Regex tests adapted from mutt to decide whether to
use the internal regex code or not.
2002-10-18 Werner Koch <wk@gnupg.org>
Released 1.3.0.
* configure.ac: Changed version number comments.
(ALL_LINGUAS): Removed all except for de. During development it
might not be a good idea to keep all of them - they get outdated
too soon and diff files will be far too large.
2002-10-17 David Shaw <dshaw@jabberwocky.com>
* README: Multiple A record rotation works with MINGW32 now, and
clarify how it works with LDAP.
2002-10-16 David Shaw <dshaw@jabberwocky.com>
* README: Some typo fixes from Florian Weimer, and bump version
number.
2002-10-15 David Shaw <dshaw@jabberwocky.com>
* NEWS: Some 1.3 notes.
2002-10-12 Werner Koch <wk@gnupg.org>
* configure.ac (NAME_OF_DEV_URANDOM): Use /dev/urandom for
NetBSD. Reported by Christian Biere.
2002-10-07 David Shaw <dshaw@jabberwocky.com>
* configure.ac: OpenLDAP 2.0.27 changed the dependencies again.
Add a "LDAPLIBS" variable so users can try and suggest the right
dependencies for their platform.
2002-10-02 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add an --enable-old-tiger, to revert back to the
old OID.
2002-09-27 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Remove --enable-tiger, as TIGER is now always
enabled.
2002-09-25 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add NETLIBS to EGDLIBS when using EGD as EGD uses
sockets.
2002-09-24 David Shaw <dshaw@jabberwocky.com>
* THANKS: Remove duplicate.
* NEWS: Bring in cosmetic changes from stable branch.
* configure.ac: Figure out whether the LDAP library supports
ldap_get_option, ld_errno, or neither.
2002-09-19 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Try linking LDAP as just -lldap as it seems very
recent OpenLDAPs (>=2.0.23) support that.
2002-09-14 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Try linking LDAP without -lresolv first, just in
case the platform has libresolv, but doesn't actually need it to
use LDAP.
2002-09-12 David Shaw <dshaw@jabberwocky.com>
* NEWS: Note that the old IDEA plugin won't work with post-1.1.90
gpg.
2002-09-12 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Remove --enable-external-hkp as this is always on
now. Add --disable-hkp to match the other
--disable-{keyservertype} options.
* NEWS, configure.ac: Move to devel version 1.3.
2002-09-11 Werner Koch <wk@gnupg.org>
Released 1.1.92.
* configure.ac (random_modules): The default random module for
system lacking a /dev/random is now auto selected at runtime.
2002-09-09 David Shaw <dshaw@jabberwocky.com>
* NEWS: typo.
* configure.ac: Add a link test for LDAP without -lresolv for
HPUX. Remove "hstrerror" test as it is no longer needed.
2002-09-02 Werner Koch <wk@gnupg.org>
* README: Removed the note about a development version so that we
later don't forget this. Minor other changes.
2002-08-29 Werner Koch <wk@gnupg.org>
* configure.ac (random_modules): Reworked the code to select the
random module. Define USE_ALL_RANDOM_MODULES for value all.
2002-08-27 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Check type of mode_t.
* NEWS: Clarify that --libexecdir is a configure option.
* configure.ac: Check for hstrerror.
2002-08-19 David Shaw <dshaw@jabberwocky.com>
* NEWS: Document new ways to enable MDC, and change in automatic
compression disabling.
* configure.ac: No such thing as the "none" random gather any
longer.
2002-08-08 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add an --enable-tiger.
* NEWS: Clarify new permission checks.
2002-08-07 David Shaw <dshaw@jabberwocky.com>
* configure.ac: If the static IDEA cipher is present, disable
dynamic loading. Also fix backwards grammar of keyserver
exec-path CHECKING message.
2002-08-05 Werner Koch <wk@gnupg.org>
* configure.ac: Bumbed version number.
2002-08-04 Werner Koch <wk@gnupg.org>
Released 1.1.91.
* configure.ac (ALL_LINGUAS): Added Catalan.
2002-08-02 Werner Koch <wk@gnupg.org>
* configure.ac: Removed all extension stuff but keep the tests for
dlopen. We don't need to figure out the flags required. All
stuff is now statically loaded.
2002-07-30 David Shaw <dshaw@jabberwocky.com>
* README, configure.ac: --with-exec-path is now clarified into
--disable-keyserver-path
* NEWS: changes since 1.1.90.
2002-07-24 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Include a GNUPG_LIBEXECDIR in g10defs.h, as well
as a SUBST for Makefiles.
2002-07-22 Timo Schulz <ts@winpt.org>
* configure.ac: Replace the 'c:/' variables with 'c:\' due
to the fact we already use '\' in the remaining code.
2002-07-08 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add --with-mailprog to override the use of
sendmail with another MTA. We can use anything that follows the
"$MAILPROG -t" convention.
2002-07-04 David Shaw <dshaw@jabberwocky.com>
* configure.ac: --enable-exec-path should be a 'with'. Fix 'no'
cases of --with-exec-path and --with-photo-viewer.
* README: Document --disable-exec, --disable-photo-viewers,
--disable-keyserver-helpers, --enable-exec-path, and
--with-photo-viewer.
* configure.ac: Add --with-photo-viewer to lock the viewer at
compile time and --disable-keyserver-helpers and
--disable-photo-viewers to allow disabling one without disabling
the other.
2002-07-03 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Allow setting USE_EXEC_PATH to lock the exec-path
to a fixed value.
2002-07-01 Werner Koch <wk@gnupg.org>
* configure.ac: Set version number to 1.1.91.
Released 1.1.90.
* INSTALL: Replaced by generic install file.
* README: Marked as development version and moved most stuff of
the old INSTALL file to here.
2002-06-30 Werner Koch <wk@gnupg.org>
* configure.ac: Link W32 version against libwsock32.
2002-06-29 Werner Koch <wk@gnupg.org>
* configure.ac (development_version): New.
(HAVE_DEV_RANDOM_IOCTL): Removed test for it; it was never used.
* BUGS, AUTHORS: Add a note on how to send security related bug
reports.
2002-06-20 David Shaw <dshaw@jabberwocky.com>
* NEWS: changes since 1.0.7.
* configure.ac: Set new version number (1.1.90), and fix Solaris
compiler flags for shared objects.
2002-06-11 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Move -lsocket and -lnsl checks before LDAP link
tests so they work properly on Solaris. Noted by David Champion.
Also, check for the Mozilla LDAP library if the OpenLDAP library
check fails. Put -lsocket and -lnsl in NETLIBS rather than LIBS
so not all programs are forced to link to them.
2002-06-05 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Add a switch for the experimental external HKP
keyserver interface.
2002-05-22 Werner Koch <wk@gnupg.org>
* configure.ac: Check for strcasecmp and strncasecmp. Removed
stricmp and memicmp checks.
2002-05-08 David Shaw <dshaw@jabberwocky.com>
* configure.ac: If LDAP comes up unusable, try #including <lber.h>
before giving up. Old versions of OpenLDAP require that.
2002-05-03 David Shaw <dshaw@jabberwocky.com>
* configure.ac: In g10defs.h, use \ for the directory separator
when HAVE_DOSISH_SYSTEM is on.
* configure.ac: Add --disable-exec flag to disable all remote
program execution. --disable-exec implies --disable-ldap and
--disable-mailto. Also look in /usr/lib for sendmail. If
sendmail is not found, do not default - just fail.
2002-04-30 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Try and link to a sample LDAP program to check if
the LDAP we're about to use is really sane. The most common
problem (using a very old OpenLDAP), could be fixed with an extra
#include, but this would not be very portable to other LDAP
libraries.
2002-04-29 Werner Koch <wk@gnupg.org>
Released 1.0.7.
* README: Fixed some minor things.
2002-04-25 Werner Koch <wk@gnupg.org>
* configure.ac: Check for locale.h and setlocale
2002-04-24 David Shaw <dshaw@jabberwocky.com>
* Update NEWS with recent changes.
2002-04-19 Werner Koch <wk@gnupg.org>
Released 1.0.6e snapshot.
2002-04-12 Werner Koch <wk@gnupg.org>
* configure.ac: Add a warning note to the definition of the
EXTSEP macros.
2002-04-09 Werner Koch <wk@gnupg.org>
* configure.ac (ALL_LINGUAS): Added Czech, Galician and Greek
translations. s/es_ES/es/.
2002-03-06 Werner Koch <wk@gnupg.org>
* configure.ac (ALL_LINGUAS): s/pt_PT/pt/
2002-03-04 David Shaw <dshaw@jabberwocky.com>
* Add a AC_DEFINE(_GNU_SOURCE). Since this is always defined in
config.h, the various autoconf tests should be tested with it
enabled. This also works around a compiler warning caused by a
minor header bug in glibc 2.1 that causes fseeko to be defined
when building gpg, but not when tested for in configure.
2002-03-03 Werner Koch <wk@gnupg.org>
Release 1.0.6d snapshot.
2002-01-04 David Shaw <dshaw@jabberwocky.com>
* NEWS: about symmetric messages and fixed file sizes.
2001-12-22 Werner Koch <wk@gnupg.org>
Released 1.0.6c snapshot.
* configure.ac (AH_BOTTOM): Moved EXEC_TEMPFILE_ONLY to here.
* acconfig.h: Removed, it should no longer be used.
2001-12-21 David Shaw <dshaw@jabberwocky.com>
* Add an acconfig.h to define EXEC_TEMPFILE_ONLY on platforms that
can't do fork/exec.
2001-12-21 Werner Koch <wk@gnupg.org>
* Makefile.am (dist-hook): We should also look in include for
distfiles.
(EXTRA_DIST): Remove VERSION because it is generated by dist-hook.
2001-12-20 David Shaw <dshaw@jabberwocky.com>
* configure.ac: replacement function for mkdtemp()
2001-12-19 David Shaw <dshaw@jabberwocky.com>
* configure.ac: Check for stat()
2001-12-19 Werner Koch <wk@gnupg.org>
* acinclude.m4 (GNUPG_SYS_SYMBOL_UNDERSCORE): Support Cygwin target
* configure.ac [CYGWIN32]: Don't build tiger. By Disastry.
2001-12-18 Werner Koch <wk@gnupg.org>
* Makefile.am (SUBDIRS): Add keyserver.
(dist-hook): Only look in mpi and scripts for distfiles; this way
we don't include those of a stale "make dist" directory.
2001-10-23 Werner Koch <wk@gnupg.org>
Released 1.0.6b snapshot.
2001-10-22 Werner Koch <wk@gnupg.org>
* configure.ac: Fixed for automake 1.5
2001-10-17 Werner Koch <wk@gnupg.org>
* README: Removed note on local_ID.
2001-09-28 Werner Koch <wk@gnupg.org>
* configure.ac: From now on add a string "-cvs" to the version to
indicate that this is a pre-release of the given version number.
2001-09-26 Werner Koch <wk@gnupg.org>
* configure.ac [MINGW32]: Switched from wsock.dll to ws2_32.dll.
2001-09-09 Werner Koch <wk@gnupg.org>
* configure.ac: autoconf changed the name of the maintainer mode
flag, so that not all warnings where enabled. Fixed that.
Reported by Dirk Meyer.
2001-09-07 Werner Koch <wk@gnupg.org>
* configure.ac: Test for strsep().
2001-09-03 Werner Koch <wk@gnupg.org>
* configure.ac: Removed GDBM tests.
2001-08-23 Werner Koch <wk@gnupg.org>
* configure.in (AC_FUNC_FSEEKO): Add.
(AC_CHECK_FUNCS): Remove fseeko. By Paul Eggert <eggert@twinsun.com>.
2001-08-22 Werner Koch <wk@gnupg.org>
* configure.ac (gethrtime): Enhanced the test by running a test
program.
* INSTALL: Removed the note about Solaris problems because the
above test should catch this.
2001-08-20 Werner Koch <wk@gnupg.org>
* acinclude.m4: Add check for plock if mlock is broken.
* configure.ac: Use regular tests for -lsocket and -lnsl,
more thorough test for gethrtime, allow specifying the path to
the zlib library if it is not in the default compiler/linker
search path, use ${datadir}. All these test enhancements are by
Albert Chin.
* configure.ac: Set some compiler flags for dec-osf and hpux. By
Tim Mooney.
* configure.ac: Create g10defs.h with EXTSEP_S et al.
2001-08-03 Werner Koch <wk@gnupg.org>
* configure.ac (VERSION,PACKAGE): Fixed quoting.
2001-07-26 Werner Koch <wk@gnupg.org>
* configure.ac: Finally got it running with the new autoconf. Had
to define PACKAGE and VERSION and to add -I.. to each Makefile.am.
2001-07-09 Werner Koch <wk@gnupg.org>
Migrated to autoconf 2.50.
* acinclude.m4: Removed the temporary LFS macros and GNUPG_LINK_FILES.
* acconfig.h: Removed
* configure.in: Replaced by...
* configure.ac: and modified for use with autoconf 2.50, use a
literal string for the version number. Replaced GNUPG_LINK_FILES
with AC_CONFIG_LINKS and moved some informational messages to the end.
* VERSION: Removed.
* Makefile.am (DISTCLEANFILES): gettext is better now; no more
need to remove the libintl.h symlink.
(dist-hook): Create VERSION file.
2001-06-08 Werner Koch <wk@gnupg.org>
* configure.in (DYNLINK_MOD_CFLAGS): Use -shared with dec-osf.
Reported by Chris Adams. Merged some cases.
2001-05-29 Werner Koch <wk@gnupg.org>
Released version 1.0.6.
2001-05-28 Werner Koch <wk@gnupg.org>
* configure.in (BUILD_INCLUDED_LIBINTL): Set to no for W32.
2001-04-29 Werner Koch <wk@gnupg.org>
Released version 1.0.5.
2001-04-28 Werner Koch <wk@gnupg.org>
Updated all copyright notices.
2001-04-27 Werner Koch <wk@gnupg.org>
* README: Removed a few outdated paragraphs.
2001-04-17 Werner Koch <wk@gnupg.org>
* acinclude.m4 (GNUPG_CHECK_DOCBOOK_TO_TEXI): New.
(GNUPG_CHECK_TYPEDEF): Define _GNU_SOURCE because we will use it
anyway.
* configure.in: Use it here.
* configure.in (ALL_LINGUAS): Add Estonian translation by Toomas Soome.
(use_m_debug): Removed --enable-m-debug because it does not work
anymore.
2001-04-06 Werner Koch <wk@gnupg.org>
* configure.in (ALL_LINGUAS): Add Turkish translation. Thanks
to Nilgun Belma Buguner.
2001-03-18 Werner Koch <wk@gnupg.org>
* configure.in: Hardwire the use of -lsocket for some
systems. Thanks to Reinhard Wobst.
2001-03-13 Werner Koch <wk@gnupg.org>
* configure.in: Add copyright notice and -lwsock32.
2001-03-12 Werner Koch <wk@gnupg.org>
* INSTALL: Add a note to VPATH builds.
2001-03-08 Werner Koch <wk@gnupg.org>
* debian/: Applied update from James.
Added copyright and license notices to some more files.
2001-01-18 Werner Koch <wk@gnupg.org>
* configure.in: Removed tool definitions for MingW32
2000-11-17 Werner Koch <wk@gnupg.org>
* acinclude.m4 (GNUPG_CHECK_FAQPROG): Do not prinnt the warning.
2000-11-11 Paul Eggert <eggert@twinsun.com>
Actually Paul's patches are dated 2000-20-17; I applied them today
and merged some ChangeLog entries (wk@gnupg.org).
* configure.in (AC_SYS_LARGEFILE): Add.
(try_large_file): Remove. All uses removed.
(AC_CHECK_FUNCS): Remove fopen64 and fstat64.
* acinclude.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES,
AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New macros,
taken from GNU tar.
* configure.in (AC_CHECK_FUNCS): Add fseeko.
2000-10-17 Werner Koch <wk@gnupg.org>
* configure.in: Disabled fopen64 checks for Solaris and HPUX.
2000-10-13 Werner Koch <wk@gnupg.org>
* configure.in: Append mpi/mpi-asm-defs.h to g10defs.h
2000-10-09 Werner Koch <wk@gnupg.org>
* acinclude.m4: Changed wording of the faqprog.pl warning.
Wed Oct 4 15:50:18 CEST 2000 Werner Koch <wk@openit.de>
* configure.in: Set DYNLINK_MOD_CFLAGS for Irix. It seems that Irix
needs the -shared flag. In 1.1 we are going to use libtool, so this
module stuff will get redesigned anyway. Suggested by Jeff Long.
Thu Sep 14 14:20:38 CEST 2000 Werner Koch <wk@openit.de>
* acinclude.m4 (GNUPG_CHECK_FAQPROG): New.
* configure.in: Test for this.
* configure.in (DYNLINK_MOD_CFLAGS): Fix by David Champion.
Wed Sep 6 17:55:47 CEST 2000 Werner Koch <wk@openit.de>
* configure.in: Check for fstat64 and fopen64
Wed Sep 6 14:59:09 CEST 2000 Werner Koch <wk@openit.de>
* configure.in (GNUPG_HOMEDIR): New.
Fri Aug 25 16:05:38 CEST 2000 Werner Koch <wk@openit.de>
* configure.in: Changes to allow for Solaris random device.
By Nils Ellmenreich.
(--with-egd-socket): New.
Wed Aug 23 19:52:51 CEST 2000 Werner Koch <wk@openit.de>
* acinclude.m4 (GNUPG_CHECK_MLOCK): Removed that silly mkdir().
Wed Jul 19 11:26:43 CEST 2000 Werner Koch <wk@openit.de>
* configure.in (mingw32): Changes to allow for mingw32msvc
Fri Jul 14 10:17:30 CEST 2000 Werner Koch <wk@openit.de>
* acinclude.m4 (GNUPG_CHECK_MLOCK): Fixed syntax error in C code.
Wed Jul 12 13:32:06 CEST 2000 Werner Koch <wk@openit.de>
Version 1.0.2
Fri Jun 9 10:09:52 CEST 2000 Werner Koch <wk@openit.de>
* configure.in: Add check for termio.h, wait unctiosn and sigaction.
Wed Jun 7 19:19:09 CEST 2000 Werner Koch <wk@openit.de>
* acinclude.m4 (MKDIR_TAKES_ONE_ARG): Check some headers. By Gaﾃｫl Quﾃｩri.
* configure.in (AM_INIT_AUTOMAKE): Use this now. By Gaﾃｫl.
Mon Jun 5 12:37:43 CEST 2000 Werner Koch <wk@openit.de>
* acnclude.m4 (GNUPG_CHECK_EXPORTDYNAMIC): Replacement for
GNUPG_CHECK_RDYNAMIC which should handle gcc with non GNU ld nicer.
Contributed by Dave Dykstra.
* configure.in (GNYPG_CHECK_RDYNAMIC): Replaced by the new check.
* configure.in (AC_CHECK_AWK): Moved before the first use of AWK. Suggested
by Dave Dykstra.
Tue May 30 16:37:55 CEST 2000 Werner Koch <wk@openit.de>
Version 1.0.1-ePit-1
Sun May 28 13:55:17 CEST 2000 Werner Koch <wk@openit.de>
* acinclude.m4 (GNUPG_SYS_NM_PARSE): Added BSDI support.
(GNUPG_CHECK_RDYNAMIC): Ditto.
Wed Apr 19 10:57:26 CEST 2000 Werner Koch <wk@openit.de>
* acconfig.h (HAVE_MLOCK): Added
Wed Mar 22 13:50:24 CET 2000 Werner Koch <wk@openit.de>
* acinclude.m4 (GNUPG_CHECK_MLOCK): Changed the way to test for
librt. Test suggested by Jeff Long.
Fri Mar 17 17:50:25 CET 2000 Werner Koch <wk@openit.de>
* acinclude.m4 (GNUPG_CHECK_MLOCK): Do librt check only when
we can't link a test program. This way GNU systems don't need
to link against linrt.
(GNUPG_CHECK_IPC): Fixed use of TRY_COMPILE macro. From Tim Mooney.
2000-03-14 12:07:54 Werner Koch (wk@habibti.openit.de)
* acinclude.m4 (GNUPG_SYS_SYMBOL_UNDERSCORE): Add support for
DJGPP.
(GNUPG_CHECK_MLOCK): Check whether mlock sits in librt.
* configure.in: Add a test for unisgned long long.
Tue Mar 7 18:45:31 CET 2000 Werner Koch <wk@gnupg.de>
* acinclude.m4 (GNUPG_CHECK_RDYNAMIC): Add NetBSD. By Thomas Klausner.
* configure.in (DYNLINK_MOD_CFLAGS): Set different for NetBSD.
Thu Mar 2 15:37:46 CET 2000 Werner Koch <wk@gnupg.de>
* configure.in: Add check for clock_gettime
Wed Feb 23 10:07:57 CET 2000 Werner Koch <wk@gnupg.de>
* configure.in (ALL_LINGUAS): Add nl.
Wed Feb 16 16:25:09 CET 2000 Werner Koch <wk@gnupg.de>
* configure.in (ALL_LINGUAS): Add Esperanto.
Wed Feb 16 14:09:00 CET 2000 Werner Koch <wk@gnupg.de>
* configure.in (ALL_LINGUAS): Add sv and ja.
* AUTHORS: Converted to a more compact format.
* INSTALL: Wrote a note about a Solaris problem.
Thu Feb 10 17:39:44 CET 2000 Werner Koch <wk@gnupg.de>
* configure.in: Use /usr/local for CFLAGS and LDFLAGS when
target is freebsd. By Rﾃｩmi.
Thu Jan 13 19:31:58 CET 2000 Werner Koch <wk@gnupg.de>
* configure.in: Do not set development version when the version has
a dash in it. Suggested by Dave Dykstra.
Thu Dec 16 10:07:58 CET 1999 Werner Koch <wk@gnupg.de>
* VERSION: Set to 1.0.1.
* configure.in: Removed substitution for doc/gph/Makefile.
Do all the gcc warning only in maintainer mode.
Thu Dec 9 10:31:05 CET 1999 Werner Koch <wk@gnupg.de>
* INSTALL: Add a hint for AIX. By Jos Backus.
Sat Dec 4 12:30:28 CET 1999 Werner Koch <wk@gnupg.de>
* configure.in (dlopen): Use CHECK_FUNC for a test of dlopen in libc.
Suggested by Alexandre Oliva.
(-Wall): Moved the settting of gcc warning options near to the end
so that tests don't get confused. Suggested by Paul D. Smith.
Mon Nov 22 11:14:53 CET 1999 Werner Koch <wk@gnupg.de>
* BUGS: Replaced content with a link to the online list.
Fri Nov 12 20:33:19 CET 1999 Werner Koch <wk@gnupg.de>
* README: Fixed a type and add a note about the gnupg-i18n ML.
Thu Oct 28 16:08:20 CEST 1999 Werner Koch <wk@gnupg.de>
* acinclude.m4, configure.in (GNUPG_CHECK_GNUMAKE): New.
Sat Oct 9 20:34:41 CEST 1999 Werner Koch <wk@gnupg.de>
* configure.in: Tweaked handling of random modules and removed
dummy support for libgcrypt.
* Makefile.am: Removed libgcrypt support.
* cgrypt/ : Removed.
* Makefile.am: Removed libtool.
Fri Oct 8 20:32:01 CEST 1999 Werner Koch <wk@gnupg.de>
* configure.in: Fixed quoting in test for development version.
* THANKS: Add entries for Michael, Brenno and J Horacio who did
very nice Howto documents - I apoligize for forgetting to mention them
earlier.
Tue Sep 28 20:54:37 CEST 1999 Werner Koch <wk@gnupg.de>
* textfilter.c (copy_clearsig_text) [__MINGW32__): Use CR,LF.
Fri Sep 17 12:56:42 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in: Add "-lcap" when capabilities are requested.
Add the conditional CROSS_COMPILING.
* Makefile.am: Don't use checks when CROSS_COMPILING.
Wed Sep 15 16:22:17 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in (ALL_LINGUAS): Add pt_PT.
* configure.in: Some tweaks for cross compiling under MingW32
* acconfig.h (USE_STATIC_RNDW32): New.
Tue Sep 7 17:08:10 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* VERSION: Set to 1.0.0.
Mon Sep 6 19:59:08 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in: Create makefile in doc/gph
* acinclude.m4 (GNUPG_FUNC_MKDIR_TAKES_ONE_ARG): New
* configure.in: use the above.
Thu Sep 2 16:40:55 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* VERSION: Set to 0.9.11.
Tue Aug 31 17:20:44 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in: Minor changes to the OS/2 and Mingw32 system labels.
Add a printable name for Hurd.
Mon Aug 30 20:38:33 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in: Some support for DJGPP (Mark Elbrecht)
Wed Aug 4 10:34:46 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* VERSION: Set to 0.9.10.
Mon Jul 26 09:34:46 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* acinclude.m4 (GNUPG_SYS_SYMBOL_UNDERSCORE): remove init of ac_cv_...
* Makefile.am (DISCLEANFILES): New
Fri Jul 23 13:53:03 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* VERSION: Set to 0.9.9.
* configure.in: Print a notice when rndunix is used.
Thu Jul 15 10:15:35 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* acinclude.m4 (GNUPG_SYS_SYMBOL_UNDERSCORE): Fixed last modification.
Wed Jul 7 13:08:40 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* Makefile.am: Support for libtool.
* configure.in: Ditto.
Tue Jun 29 21:44:25 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in (use_local_zlib): The lost dollar is back.
* acinclude.m4 (GNUPG_SYS_SYMBOL_UNDERSCORE): Add EMX case.
* configure.in: Another variant of the MX vendor string
* configure.in (--with-capabilities): Some test code (Remi).
Sat Jun 26 12:15:59 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* acinclude.m4 (GNUPG_CHECK_RDYNAMIC): Support for HPUX and IRIX.
* configure.in (HAVE_DL_SHL_LOAD): New for HPUX (Dave Dykstra).
* VERSION: Now 0.9.8
Wed Jun 16 20:16:21 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in: Add test for docbook-to-man
Tue Jun 15 12:21:08 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* acinclude.m4 (GNUPG_SYS_NM_PARSE): Support for {net,free}bsd,
Thu Jun 10 14:18:23 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in (ZLIB,GDBM): Check both, header and lib.
Sat Jun 5 15:30:33 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* pkclist.c (key_present_in_pk_list): New (Michael).
Tue May 25 19:50:32 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in (IS_DEVELOPMENT_VERSION): Fixed detection.
Sun May 23 14:20:22 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* acinclude.m4 (GNUPG_SYS_SYMBOL_UNDERSCORE): assume yes when
cross-compiling.
Mon May 17 21:54:43 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in (socket): Fix for Unisys by Katsuhiro Kondou.
Sat May 8 19:28:08 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* NEWS: Add a marker line which I forgot to do for 0.9.6.
Thu May 6 14:18:17 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* README: Minor updates
* VERSION: Now 0.9.6
Thu Apr 8 09:35:53 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* acinclude.m4 (GNUPG_CHECK_RDYNAMIC): Fix for
amiga-openbsd (Peter Reich)
(GNUPG_PROG_NM): Ditto
Wed Apr 7 20:51:39 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* Makefile.am (g10defs.h): Removed.
* configure.in (AC_OUTPUT_COMMANDS): Create g10defs.h
Sat Mar 20 12:55:33 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* VERSION: Now 0.9.5
Sun Mar 14 19:34:36 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* acinclude.m4 (AM_SYS_SYMBOL_UNDERSCORE): Removed because it is
now in the latest libtool.
Thu Mar 11 16:39:46 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in: Removed the need for libtool
Mon Mar 8 20:47:17 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in (DLSYM_NEEDS_UNDERSCORE): Replaced.
* acinclude.in (AM_SYS_SYMBOL_UNDERSCORE): New.
* VERSION: Now 0.9.4
Sun Feb 28 19:11:00 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in (dld): Test disabled.
Fri Feb 26 17:55:41 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* encode.c (encode_simple): temporary fix.
Wed Feb 24 11:07:27 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in: New option --enable-static-rnd.
Mon Feb 22 20:04:00 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* BUGS: Now we assign bug numbers.
* OBUGS: New to keep rack o fixed bugs (CVS only)
Fri Feb 19 18:01:54 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* VERSION: Released 0.9.3
Fri Feb 19 15:49:15 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* acinclude.m4: Removed gettext macros.
Tue Feb 16 14:10:02 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in (socket): Check for -lsocket and -lnsl.
(osf4): Disable all warnings for DEC's cc.
(-Wall): Add more warning options for gcc
Sat Feb 13 12:04:43 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in: Changed detection of compiler flags.
* intl/ : Removed directory
Wed Feb 10 17:15:39 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* acinclude.m4 (GNUPG_CHECK_RDYNAMIC): Fix for freebsd 2.2
* configure.in: a lot of changes to allow selection of modules.
Add support for OS/2.
* acinclude.m4: add some more caching
* README: Spelling and grammar corrections (John A. Martin)
* INSTALL: Ditto.
Wed Jan 20 21:40:21 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in: --enable-m-guard is now default
Wed Jan 13 12:49:36 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* INSTALL: Applied new information how to build rpms by Fabio Coatti
* Makefile.in (gnupg.spec): Changed the names.
Tue Jan 12 11:17:18 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* config.links (m68k-atari-mint): New
Tue Jan 12 09:17:19 CET 1999 Gaﾃｫl Quﾃｩri <gqueri@mail.dotcom.fr>
* all: Fixed typos all over the place
Sat Jan 9 16:02:23 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* configure.in: Add a way to statically link rndunix
Sun Jan 3 15:28:44 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* acinclude.m4 (GNUPG_CHECK_RDYNAMIC): New.
* configure.in (DYNLOAD_CFLAGS): Use result from CHECK_RDYNAMIC
Wed Dec 23 13:18:14 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* README: Replaced the command overview with a short intro.
Sat Dec 12 18:40:32 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* configure.in: Add check for dlopen in libc (Greg Troxel)
and a new define
* acconfig.h (DLSYM_NEEDS_UNDERSCORE): New.
Thu Dec 10 20:15:36 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* acinclude.m (GNUPG_CHECK_PIC): New
* configure.in, acinclude.m4: Renamed all WK_ to GNUPG_
Tue Dec 8 15:09:29 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* VERSION: Set to 0.4.5
Wed Nov 25 12:38:29 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in (USE_RNDLINUX): New.
Fri Nov 20 19:34:57 1998 Werner Koch (wk@isil.d.shuttle.de)
* VERSION: Released 0.4.4
* configure.in (try_asm_modules): For option --disable-asm
Tue Nov 10 19:32:40 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in (MPI_SFLAGS): New.
Tue Nov 10 13:44:53 1998 Werner Koch (wk@isil.d.shuttle.de)
* ABOUT-NLS: New
* configure.in (AC_REVISION): New.
Sun Nov 8 18:20:35 1998 Werner Koch (wk@isil.d.shuttle.de)
* VERSION: Set to 0.4.3
Sun Oct 25 19:49:37 1998 Werner Koch (wk@isil.d.shuttle.de)
* Makefile.am (g10defs.h): New macro GNUPG_DATADIR.
Wed Oct 21 17:24:24 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in: Removed gettext kludge
* acinclude.m4: Add patched AM_WITH_NKS macro
Tue Oct 20 19:03:36 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in: Kludge to make AM_GNU_GETTEXT work,
changed some macors to more modern versions. Also
changeg the all makefiles to remove duplicate ../intl.
* acinclude.m4: Removed the gettext stuff, as this
already comes with automake now.
Wed Oct 14 12:11:34 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in (NAME_OF_DEV_RANDOM): New.
(DYNLINK_MOD_CFLAGS): New.
Thu Oct 8 10:55:15 1998 Werner Koch (wk@isil.d.shuttle.de)
* Makefile.am (g10defs.h): creates include file
* acconfig.h: now includes g10defs.h
* configure.in: Removed G10_LOCALEDIR and GNUPG_LIB
Thu Sep 17 18:49:40 1998 Werner Koch (wk@(none))
* Makefile.am (dist-hook): Now creates RPM file.
* scripts/gnupg.spec: New template file for RPMs
Thu Jul 30 19:17:07 1998 Werner Koch (wk@(none))
* acinclude.h (WK_CHECK_IPC): New
* configure.in : Add checks for SysV IPC
Thu Jun 25 11:18:49 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in (--disable-dynload): New.
Wed Jun 10 07:48:59 1998 Werner Koch,mobil,,, (wk@tobold)
* configure.in (GNUPG_LIBDIR): New.
Mon May 25 19:10:59 1998 Werner Koch (wk@isil.d.shuttle.de)
* rand-unix.c (fast_random_poll): fixed syntax bug.
Mon May 11 10:21:31 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in (PRINTABLE_OS_NAME): Linux is now GNU/Linux
Tue Apr 14 19:08:05 1998 Werner Koch (wk@isil.d.shuttle.de)
* [all files]: Applied Matthew Skala's typo and grammar fixes.
Wed Mar 4 10:32:40 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in (getrusage,gettimeofday): New tests.
Fri Feb 27 13:14:17 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in (--disable-m-guard): New.
Thu Feb 26 17:09:27 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in, acinclude.m4, intl/, po/: New macros taken
from GNOME, switched to automake 1.2f
Thu Feb 26 09:05:46 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in (doc/Makefile): New
Thu Feb 26 07:40:47 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in: Changed gettext stuff
Wed Feb 25 11:44:10 1998 Werner Koch (wk@isil.d.shuttle.de)
* checks/*test : restructured the directory.
Tue Feb 24 15:59:12 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in: Changed the name of the package to GNUPG and
chnaged several other names too.
Wed Feb 18 17:36:45 1998 Werner Koch (wk@isil.d.shuttle.de)
* Makefile.am (checks): New.
Sat Feb 14 15:37:55 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in (mpi_config_done): Removed asm links caching.
Sat Feb 14 14:02:20 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in (PRINTABLE_OS_NAME): New.
* acconfig.h: Likewise.
Fri Feb 13 19:43:41 1998 Werner Koch (wk@isil.d.shuttle.de)
* configure.in : Fixed zlib stuff
* Makefile.am: Likewise
Copyright 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006 Free Software Foundation, Inc.
This file is free software; as a special exception the author gives
unlimited permission to copy and/or distribute it, with or without
modifications, as long as this notice is preserved.
This file is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
diff --git a/NEWS b/NEWS
index 60625d98c..b04d37d6b 100644
--- a/NEWS
+++ b/NEWS
@@ -1,1953 +1,1953 @@
Noteworthy changes in version 1.4.8 (unreleased)
------------------------------------------------
Noteworthy changes in version 1.4.7 (2007-03-05)
------------------------------------------------
* By default, do not allow processing multiple plaintexts in a
single stream. Many programs that called GnuPG were assuming
that GnuPG did not permit this, and were thus not using the
plaintext boundary status tags that GnuPG provides. This change
makes GnuPG reject such messages by default which makes those
programs safe again. --allow-multiple-messages returns to the
- old behavior.
+ old behavior. [CVE-2007-1263].
* [W32] The environment variable LANGUAGE may be used to override
the language given by HKCU\Software\GNU\GnuPG:Lang. The
language files "*.mo" are expected in a directory named
"gnupg.nls" below the directory with the gpg.exe binary.
* New --verify-option show-primary-uid-only.
Noteworthy changes in version 1.4.6 (2006-12-06)
------------------------------------------------
* Fixed a serious and exploitable bug in processing encrypted
packages. [CVE-2006-6235].
* Fixed a buffer overflow in gpg. [bug#728, CVE-2006-6169]
* Fixed a bug while decrypting certain compressed and encrypted
messages. [bug#537]
* Added --s2k-count to set the number of times passphrase mangling
is repeated. The default is 65536 times.
* Added --passphrase-repeat to set the number of times GPG will
prompt for a new passphrase to be repeated. This is useful to
help memorize a new passphrase. The default is 1 repetition.
* Added a GPL license exception to the keyserver helper programs
gpgkeys_ldap, gpgkeys_curl, and gpgkeys_hkp, to clarify any
potential questions about the ability to distribute binaries
that link to the OpenSSL library. GnuPG does not link directly
to OpenSSL, but libcurl (used for HKP, HTTP, and FTP) and
OpenLDAP (used for LDAP) may. Note that this license exception
is considered a bug fix and is intended to forgive any
violations pertaining to this issue, including those that may
have occurred in the past.
* Man pages are now built from the same source as those of GnuPG-2.
Noteworthy changes in version 1.4.5 (2006-08-01)
------------------------------------------------
* Reverted check for valid standard handles under Windows.
* More DSA2 tweaks.
* Fixed a problem uploading certain keys to the smart card.
* Fixed 2 more possible memory allocation attacks.
* Added Norwegian translation.
Noteworthy changes in version 1.4.4 (2006-06-25)
------------------------------------------------
* User IDs are now capped at 2048 bytes. This avoids a memory
allocation attack (see CVE-2006-3082).
* Added support for the SHA-224 hash. Like the SHA-384 hash, it
is mainly useful when DSS (the US Digital Signature Standard)
compatibility is desired.
* Added support for the latest update to DSA keys and signatures.
This allows for larger keys than 1024 bits and hashes other than
SHA-1 and RIPEMD/160. Note that not all OpenPGP implementations
can handle these new keys and signatures yet. See
"--enable-dsa2" in the manual for more information.
Noteworthy changes in version 1.4.3 (2006-04-03)
------------------------------------------------
* If available, cURL-based keyserver helpers are built that can
retrieve keys using HKP or any protocol that cURL supports
(HTTP, HTTPS, FTP, FTPS, etc). If cURL is not available, HKP
and HTTP are still supported using a built-in cURL emulator. To
force building the old pre-cURL keyserver helpers, use the
configure option --enable-old-keyserver-helpers. Note that none
of this affects finger or LDAP support, which are unchanged.
Note also that a future version of GnuPG will remove the old
keyserver helpers altogether.
* Implemented Public Key Association (PKA) signature verification.
This uses special DNS records and notation data to associate a
mail address with an OpenPGP key to prove that mail coming from
that address is legitimate without the need for a full trust
path to the signing key.
* When exporting subkeys, those specified with a key ID or
fingerpint and the '!' suffix are now merged into one keyblock.
* Added "gpg-zip", a program to create encrypted archives that can
interoperate with PGP Zip.
* Added support for signing subkey cross-certification "back
signatures". Requiring cross-certification to be present is
currently off by default, but will be changed to on by default
in the future, once more keys use it. A new "cross-certify"
command in the --edit-key menu can be used to update signing
subkeys to have cross-certification.
* The key cleaning options for --import-options and
--export-options have been further polished. "import-clean" and
"export-clean" replace the older
import-clean-sigs/import-clean-uids and
export-clean-sigs/export-clean-uids option pairs.
* New "minimize" command in the --edit-key menu removes everything
that can be removed from a key, rendering it as small as
possible. There are corresponding "export-minimal" and
"import-minimal" commands for --export-options and
--import-options.
* New --fetch-keys command to retrieve keys by specifying a URI.
This allows direct key retrieval from a web page or other
location that can be specified in a URI. Available protocols
are HTTP and finger, plus anything that cURL supplies, if built
with cURL support.
* Files containing several signed messages are not allowed any
longer as there is no clean way to report the status of such
files back to the caller. To partly revert to the old behaviour
the new option --allow-multisig-verification may be used.
* The keyserver helpers can now handle keys in either ASCII armor
or binary format.
* New auto-key-locate option that takes an ordered list of methods
to locate a key if it is not available at encryption time (-r or
--recipient). Possible methods include "cert" (use DNS CERT as
per RFC2538bis, "pka" (use DNS PKA), "ldap" (consult the LDAP
server for the domain in question), "keyserver" (use the
currently defined keyserver), as well as arbitrary keyserver
URIs that will be contacted for the key.
* Able to retrieve keys using DNS CERT records as per RFC-4398.
Noteworthy changes in version 1.4.2 (2005-07-26)
------------------------------------------------
* New command "verify" in the card-edit menu to display
the Private-DO-3. The Admin command has been enhanced to take
the optional arguments "on", "off" and "verify". The latter may
be used to verify the Admin Pin without modifying data; this
allows displaying the Private-DO-4 with the "list" command.
* Rewrote large parts of the card code to optionally make use of a
running gpg-agent. If --use-agent is being used and a gpg-agent
with enabled scdaemon is active, gpg will now divert all card
operations to that daemon. This is required because both,
scdaemon and gpg require exclusive access to the card reader. By
delegating the work to scdaemon, both can peacefully coexist and
scdaemon is able to control the use of the reader. Note that
this requires at least gnupg 1.9.17.
* Fixed a couple of problems with the card reader.
* Command completion is now available in the --edit-key and
--card-edit menus. Filename completion is available at all
filename prompts. Note that completion is only available if the
system provides a readline library.
* New experimental HKP keyserver helper that uses the cURL
library. It is enabled via the configure option --with-libcurl
like the other (also experimental) cURL helpers.
* New key cleaning options that can be used to remove unusable
(expired, revoked) signatures from a key. This is available via
the new "clean" command in --edit-key on a key by key basis, as
well as via the import-clean-sigs/import-clean-uids and
export-clean-sigs/export-clean-uids options for --import-options
and --export-options. These are currently off by default, and
replace the import-unusable-sigs/export-unusable-sigs options
from version 1.4.1.
* New export option export-reset-subkey-passwd.
* New option --limit-card-insert-tries.
Noteworthy changes in version 1.4.1 (2005-03-15)
------------------------------------------------
* New --rfc2440-text option which controls how text is handled in
signatures. This is in response to some problems seen with
certain PGP/MIME mail clients and GnuPG version 1.4.0. More
details about this are available at
<http://lists.gnupg.org/pipermail/gnupg-users/2005-January/024408.html>.
* New "import-unusable-sigs" and "export-unusable-sigs" tags for
--import-options and --export-options. These are off by default,
which causes GnuPG to not import or export key signatures that
are not usable (e.g. expired signatures).
* New experimental HTTP, HTTPS, FTP, and FTPS keyserver helper
that uses the cURL library <http://curl.haxx.se> to retrieve
keys. This is disabled by default, but may be enabled with the
configure option --with-libcurl. Without this option, the
existing HTTP code is used for HTTP, and HTTPS, FTP, and FTPS
are not supported.
* When running a --card-status or --card-edit and a public key is
available, missing secret key stubs will be created on the fly.
Details of the key are listed too.
* The implicit packet dumping in double verbose mode is now sent
to stderr and not to stdout.
* Added countermeasures against the Mister/Zuccherato CFB attack
<http://eprint.iacr.org/2005/033>.
* [W32] The algorithm for the default home directory changed:
First we look at the environment variable GNUPGHOME, if this one
is not set, we check whether the registry entry
{HKCU,HKLM}\Software\GNU\GnuPG:HomeDir has been set. If this
fails we use a GnuPG directory below the standard application
data directory (APPDATA) of the current user. Only in the case
that this directory cannot be determined, the old default of
c:\gnupg will be used. The option --homedir still overrides all
of them.
* [W32] The locale selection under Windows changed. You need to
enter the locale in the registry at HKCU\Software\GNU\GnuPG:Lang.
For German you would use "de". If it is not set, GnuPG falls
back to HKLM. The languages files "*.mo" are expected in a
directory named "gnupg.nls" below the installation directory;
that directory must be stored in the registry at the same key as
above with the name "Install Directory".
* Add new --edit-key command "bkuptocard" to allow restoring a
card key from a backup.
* The "fetch" command of --card-edit now retrieves the key using
the default keyserver if no URL has been stored on the card.
* New configure option --enable-noexecstack.
Noteworthy changes in version 1.4.0 (2004-12-16)
------------------------------------------------
* See the file doc/highlights-1.4.txt for an overview of all
changes in respect to the 1.2 series.
Noteworthy changes in version 1.3.93 (2004-12-14)
-------------------------------------------------
* Ask the user to repeat a changed PIN.
* Switched to automake 1.9. Minor big fixes.
Noteworthy changes in version 1.3.92 (2004-10-28)
-------------------------------------------------
* Added Russian man page. Thanks to Pawel I. Shajdo.
* libiconv is now used to support other character sets other than
UTF-8, Latin-1,-2 and KOI8-2. The W32 version will only work
correctly when iconv.dll is installed on the system. A binary
version is available at all GNU mirror sites under libiconv.
* gettext for Windows has been simplified. The MO files are now
distributed UTF-8 encoded and gpg translates on the fly.
Noteworthy changes in version 1.3.91 (2004-10-15)
-------------------------------------------------
* A new configure option --enable-selinux-support disallows
processing of confidential files used by gpg (e.g. secring.gpg).
This helps writing ACLs for the SELinux kernel.
* Support for fetching keys via finger has been added. This is
useful for setting a preferred keyserver URL like
"finger:wk@g10code.com".
* Timeout support has been added to the keyserver helpers. This
allows users to set an upper limit on how long to wait for the
keyserver before giving up.
* New "direct" trust model where users can set key validity
directly if they do not want to participate in the web of trust.
* Minor bug fixes, code and string cleanups.
Noteworthy changes in version 1.3.90 (2004-10-01)
-------------------------------------------------
* Readline support at all prompts is now available if the system
provides a readline library. The build time option
--without-readline may be used to disable this feature.
* Support for the OpenPGP smartcard is now enabled by default.
Use the option --disable-card-support to build without support
for smartcards.
* New command "addcardkey" in the key edit menu to add subkeys to
a smartcard. New command "keytocard" to transfer a key to a smartcard.
The serial number of the card is show in secret key listings.
* -K may now be used as an alias for --list-secret-keys.
* HTTP Basic authentication is now supported for all HKP and HTTP
keyserver functions, either through a proxy or via direct
access.
Noteworthy changes in version 1.3.6 (2004-05-22)
------------------------------------------------
* New --keyid-format option that selects short (99242560), long
(DB698D7199242560), 0xshort (0x99242560), or 0xlong
(0xDB698D7199242560) keyid displays. This lets users tune the
display to what they prefer.
* The --list-options and --verify-options option
"show-long-keyids" has been removed since --keyid-format
obviates the need for them.
* Support for the old quasi-1991 partial length encoding has been
removed.
* The --export-all and --export-options include-non-rfc options
have been removed as superfluous since nonstandard V3 Elgamal
sign+encrypt keys have been removed.
* Preferred keyserver support has been added. Users may set a
preferred keyserver via the --edit-key command "keyserver". If
the --keyserver-option honor-keyserver-url is set (and it is by
default), then the preferred keyserver is used when refreshing
that key.
* The --sig-keyserver-url option can be used to inform signature
recipients where the signing key can be downloaded. When
verifying the signature, if the signing key is not present, and
the keyserver options honor-keyserver-url and auto-key-retrieve
are set, this URL will be used to retrieve the key.
* Support for fetching keys via HTTP has been added. This is
mainly useful for setting a preferred keyserver URL like
"http://www.jabberwocky.com/key.asc".
* New --ask-cert-level/--no-ask-cert-level option to turn on and
off the prompt for signature level when signing a key. Defaults
to off.
* New --gpgconf-list command for internal use by the gpgconf
utility from gnupg 1.9.x.
Noteworthy changes in version 1.3.5 (2004-02-26)
------------------------------------------------
* New --min-cert-level option to disregard key signatures that are
under a specified level. Defaults to 2 (i.e. discard 0x11
signatures).
* New --max-output option to limit the amount of plaintext output
generated by GnuPG. This option can be used by programs which
call GnuPG to process messages that may result in plaintext
larger than the calling program is prepared to handle. This is
sometimes called a "Decompression Bomb".
* New --list-config command for frontends and other programs that
call GnuPG. See doc/DETAILS for the specifics of this.
* Some performance improvements with large keyrings. See the
build time option --enable-key-cache=SIZE in the README file for
details.
* Some portability fixes for the OpenBSD/i386, HPPA, and AIX
platforms.
* New keyserver-option "http-proxy" to specify which proxy to use
in the config file without using environment variables.
* Added support for storing, retrieving, and searching for keys in
LDAP servers. Note that this is different than the "LDAP
keyserver" which was already (and remains) supported.
* Added support for TLS and LDAPS session encryption for LDAP.
* --show-session-key/--override-session-key now works with
--symmetric messages.
* The configure options --enable-rsa and --disable-rsa can now be
used to enable or disable the RSA algorithm. This can be useful
for embedded use where space is tight. --enable-minimal
includes --disable-rsa. RSA is enabled by default.
* The last support for Elgamal sign+encrypt keys has been removed.
Noteworthy changes in version 1.3.4 (2003-11-27)
------------------------------------------------
* Added support for BZIP2 compression. This should be considered
experimental, and is only available if the libbzip2 library
<http://sources.redhat.com/bzip2/> is installed.
* Added the ability to handle messages that can be decrypted with
either a passphrase or a secret key. These messages may be
generated with --symmetric --encrypt or --symmetric --sign
--encrypt.
* The config file search has been enhanced to try for less
specific filename matches before giving up. For example,
version 1.3.4 will try for gpg.conf-1.3.4, gpg.conf-1.3, and
gpg.conf-1 before falling back to the regular gpg.conf file.
* Fixed a format string bug in the HKP keyserver handler.
* Support for Elgamal sign+encrypt keys has been removed. Old
signatures may still be verified, and existing encrypted
messages may still be decrypted, but no new signatures may be
issued by, and no new messages will be encrypted to, these keys.
Noteworthy changes in version 1.3.3 (2003-10-10)
------------------------------------------------
* Basic support for the OpenPGP card. New commands --card-status,
--card-edit, --change-pin and the configuration options
--reader-port, --ctapi-driver, --pcsc-driver, and --disable-ccid.
* Full (read/write) support for the SHA-256 hash has been added.
* Support for the TIGER/192 hash has been dropped. This should
not be interpreted as a statement as to the strength of
TIGER/192 - rather, the upcoming revision to the OpenPGP
standard removes support for several unused (or mostly unused)
hashes.
* Revoked or expired user IDs are now skipped when selecting keys
for encryption. Specifying a key by the key ID overrides this
check and allows the selection of any key.
* Note that --no-mangle-dos-filenames is now the default. If you
are upgrading from a 1.2.x version of GnuPG, and are running a
very old version of Windows that has the 8.3 filename limit, you
may need to change this.
* Multiple "Comment:" lines in armored output are now allowed.
* New --list-options option. This option takes a list of
arguments that allows the user to customize exactly what key
listings (including the --edit-key listing) look like, enabling
or disabling things such as photo display, policy URL, preferred
keyserver URL, or notation display, long or short keyIDs,
calculated validity for each user ID, etc. See the manual for
the complete list of list-options.
* New --verify-options option. This option takes a list of
arguments that allows the user to customize exactly what happens
during signature verification, enabling or disabling things such
as photo display, policy URL, preferred keyserver URL, or
notation display, long or short keyIDs, calculated validity for
each user ID, etc. See the manual for the complete list of
verify-options.
* New --sig-keyserver-url to embed a "where to get my key"
subpacket into a signature.
* The options --show-photos, --show-policy-url, --show-notation,
and --show-keyring are all deprecated in favor of those
arguments to --list-options and --verify-options. The new
method is more flexible since a user can specify (for example)
showing photos during sig verification, but not in key listings.
* The complete fingerprint of the key that made a given key
certification is now available in the --with-colons output. For
technical reasons, this is only available when running with
--no-sig-cache set. See doc/DETAILS for the specifics of this.
* IPv6 support for HKP keyserver access. IPv6 for LDAP keyserver
access is also supported, but is dependent on the LDAP library
used.
* To simplify running both the stable (1.2.x) and development
(1.3.x) versions of GnuPG, the development version will try to
load the options file gpg.conf-VERSION (e.g. gpg.conf-1.3.3 for
this release) before falling back to the regular gpg.conf file.
* Two new %-expandos for use in notation and policy URLs. "%g"
expands to the fingerprint of the key making the signature
(which might be a subkey), and "%p" expands to the fingerprint
of the primary key that owns the key making the signature.
* New "tru" record in --with-colons --list-keys listings. It
shows the status of the trust database that was used to
calculate the key validity in the listings. See doc/DETAILS for
the specifics of this.
* New REVKEYSIG status tag for --status-fd. It indicates a valid
signature that was issued by a revoked key. See doc/DETAILS for
the specifics of this.
* A number of portability changes to make building GnuPG on
less-common platforms easier.
Noteworthy changes in version 1.3.2 (2003-05-27)
------------------------------------------------
* New "--gnupg" option (set by default) that disables --openpgp,
and the various --pgpX emulation options. This replaces
--no-openpgp, and --no-pgpX, and also means that GnuPG has
finally grown a --gnupg option to make GnuPG act like GnuPG.
* A bug in key validation has been fixed. This bug only affects
keys with more than one user ID (photo IDs do not count here),
and results in all user IDs on a given key being treated with
the validity of the most-valid user ID on that key.
* Notation names that do not contain a '@' are no longer allowed
unless --expert is set. This is to help prevent pollution of
the (as yet unused) IETF notation namespace.
* Multiple trust models are now supported via the --trust-model
option. The options are "pgp" (web-of-trust plus trust
signatures), "classic" (web-of-trust only), and "always"
(identical to the --always-trust option).
* The --personal-{cipher|digest|compression}-preferences are now
consulted to get default algorithms before resorting to the
last-ditch defaults of --s2k-cipher-algo, SHA1, and ZIP
respectively. This allows a user to set algorithms to use in a
safe manner so they are used when legal to do so, without
forcing them on for all messages.
* New --primary-keyring option to designate the keyring that the
user wants new keys imported into.
* --s2k-digest-algo is now used for all password mangling.
Earlier versions used both --s2k-digest-algo and --digest-algo
for passphrase mangling.
* Handling of --hidden-recipient or --throw-keyid messages is now
easier - the user only needs to give their passphrase once, and
GnuPG will try it against all of the available secret keys.
* Care is taken to prevent compiler optimization from removing
memory wiping code.
* New option --no-mangle-dos-filenames so that filenames are not
truncated in the W32 version.
* A "convert-from-106" script has been added. This is a simple
script that automates the conversion from a 1.0.6 or earlier
version of GnuPG to a 1.0.7 or later version.
* Disabled keys are now skipped when selecting keys for
encryption. If you are using the --with-colons key listings to
detect disabled keys, please see doc/DETAILS for a minor format
change in this release.
* Minor trustdb changes to make the trust calculations match
common usage.
* New command "revuid" in the --edit-key menu to revoke a user ID.
This is a simpler interface to the old method (which still
works) of revoking the user ID self-signature.
* Status VALIDSIG does now also print the primary key's
fingerprint, as well as the signature version, pubkey algorithm,
hash algorithm, and signature class.
* Add read-only support for the SHA-256 hash, and optional
read-only support for the SHA-384 and SHA-512 hashes.
* New option --enable-progress-filter for use with frontends.
* DNS SRV records are used in HKP keyserver lookups to allow
administrators to load balance and select keyserver ports
automatically. This is as specified in
draft-shaw-openpgp-hkp-00.txt.
* When using the "keyid!" syntax during a key export, only that
specified key is exported. If the key in question is a subkey,
the primary key plus only that subkey is exported.
* configure --disable-xxx options to disable individual algorithms
at build time. This can be used to build a smaller gpg binary
for embedded uses where space is tight. See the README file for
the algorithms that can be used with this option, or use
--enable-minimal to build the smallest gpg possible (disables
all optional algorithms, disables keyserver access, and disables
photo IDs).
* The keyserver no-modify flag on a key can now be displayed and
modified.
* Note that the TIGER/192 digest algorithm is in the process of
being dropped from the OpenPGP standard. While this release of
GnuPG still contains it, it is disabled by default. To ensure
you will still be able to use your messages with future versions
of GnuPG and other OpenPGP programs, please do not use this
algorithm.
Noteworthy changes in version 1.3.1 (2002-11-12)
------------------------------------------------
* Trust signature support. This is based on the Maurer trust
model where a user can specify the trust level along with the
signature with multiple levels so users can delegate
certification ability to other users, possibly restricted by a
regular expression on the user ID. Note that full trust
signature support requires a regular expression parsing library.
The regexp code from glibc 2.3.1 is included for those platforms
that don't have working regexp functions available. The
configure option --disable-regex may be used to disable any
regular expression code, which will make GnuPG ignore any trust
signature with a regular expression included.
* Two new commands --hidden-recipient (-R) and --hidden-encrypt-to
encrypt to a user, but hide the identity of that user. This is
the same functionality as --throw-keyid, but can be used on a
per-user basis.
* Full algorithm names (e.g. "3DES", "SHA1", "ZIP") can now be
used interchangeably with the short algorithm names (e.g. "S2",
"H2", "Z1") anywhere algorithm names are used in GnuPG.
Noteworthy changes in version 1.3.0 (2002-10-18)
------------------------------------------------
* The last piece of internal keyserver support has been removed,
and now all keyserver access is done via the keyserver plugins.
There is also a newer keyserver protocol used between GnuPG and
the plugins, so plugins from earlier versions of GnuPG may not
work properly.
* The HKP keyserver plugin supports the new machine-readable key
listing format for those keyservers that provide it.
* When using a HKP keyserver with multiple DNS records (such as
wwwkeys.pgp.net which has the addresses of multiple servers
around the world), try all records until one succeeds. Note
that it depends on the LDAP library used whether the LDAP
keyserver plugin does this as well.
* The library dependencies for OpenLDAP seem to change fairly
frequently, and GnuPG's configure script cannot guess all the
combinations. Use ./configure LDAPLIBS="-L libdir -l libs" to
override the script and use the libraries selected.
* Secret keys generated with --export-secret-subkeys are now
indicated in key listings with a '#' after the "sec", and in
--with-colons listings by showing no capabilities (no lowercase
characters).
* --trusted-key has been un-obsoleted, as it is useful for adding
ultimately trusted keys from the config file. It is identical
to using --edit and "trust" to change a key to ultimately
trusted.
* Translations other than de are no longer distributed with the
development branch. This is due to the frequent text changes
during development, which cause the translations to rapidly go
out of date.
Noteworthy changes in version 1.1.92 (2002-09-11)
-------------------------------------------------
* [IMPORTANT] The default configuration file is now
~/.gnupg/gpg.conf. If an old ~/.gnupg/options is found it will
still be used. This change is required to have a more
consistent naming scheme with forthcoming tools.
* The use of MDCs have increased. A MDC will be used if the
recipients directly request it, if the recipients have AES,
AES192, AES256, or TWOFISH in their cipher preferences, or if
the chosen cipher has a blocksize not equal to 64 bits
(currently this is also AES, AES192, AES256, and TWOFISH).
* GnuPG will no longer automatically disable compression when
processing an already-compressed file unless a MDC is being
used. This is to give the message a certain amount of
resistance to the chosen-ciphertext attack while communicating
with other programs (most commonly PGP earlier than version 7.x)
that do not support MDCs.
* The option --interactive now has the desired effect when
importing keys.
* The file permission and ownership checks on files have been
clarified. Specifically, the homedir (usually ~/.gnupg) is
checked to protect everything within it. If the user specifies
keyrings outside this homedir, they are presumed to be shared
keyrings and therefore *not* checked. Configuration files
specified with the --options option and the IDEA cipher
extension specified with --load-extension are checked, along
with their enclosing directories.
* The configure option --with-static-rnd=auto allows to build gpg
with all available entropy gathering modules included. At
runtime the best usable one will be selected from the list
linux, egd, unix. This is also the default for systems lacking
a /dev/random device.
* The default character set is now taken from the current locale;
it can still be overridden by the --charset option. Using the
option -vvv shows the used character set.
* [REMOVED] --emulate-checksum-bug and --emulate-3des-s2k-bug have
been removed.
Noteworthy changes in version 1.1.91 (2002-08-04)
-------------------------------------------------
* All modules are now linked statically; the --load-extension
option is in general not useful anymore. The only exception is
to specify the deprecated idea cipher.
* The IDEA plugin has changed. Previous versions of the IDEA
plugin will no longer work with GnuPG. However, the current
version of the plugin will work with earlier GnuPG versions.
* When using --batch with one of the --delete-key commands, the
key must be specified by fingerprint. See the man page for
details.
* There are now various ways to restrict the ability GnuPG has to
exec external programs (for the keyserver helpers or photo ID
viewers). Read the README file for the complete list.
* New export option to leave off attribute packets (photo IDs)
during export. This is useful when exporting to HKP keyservers
which do not understand attribute packets.
* New import option to repair during import the HKP keyserver
mangling multiple subkeys bug. Note that this cannot completely
repair the damaged key as some crucial data is removed by the
keyserver, but it does at least give you back one subkey. This
is on by default for keyserver --recv-keys, and off by default
for regular --import.
* The keyserver helper programs now live in
/usr/[local/]libexec/gnupg by default. If you are upgrading
from 1.0.7, you might want to delete your old copies in
/usr/[local/]bin. If you use an OS that does not use libexec
for whatever reason, use configure --libexecdir=/usr/local/lib
to place the keyserver helpers there.
* The LDAP keyserver handler now works properly with very old
(version 1) LDAP keyservers.
Noteworthy changes in version 1.1.90 (2002-07-01)
-------------------------------------------------
* New commands: --personal-cipher-preferences,
--personal-digest-preferences, and
--personal-compress-preferences allow the user to specify which
algorithms are to be preferred. Note that this does not permit
using an algorithm that is not present in the recipient's
preferences (which would violate the OpenPGP standard). This
just allows sorting the preferences differently.
* New "group" command to refer to several keys with one name.
* A warning is issued if the user forces the use of an algorithm
that is not listed in the recipient's preferences.
* Full revocation key (aka "designated revoker") support.
* The preferred hash algorithms on a key are consulted when
encrypting a signed message to that key. Note that this is
disabled by default by a SHA1 preference in
--personal-digest-preferences.
* --cert-digest-algo allows the user to specify the hash algorithm
to use when signing a key rather than the default SHA1 (or MD5
for PGP2 keys). Do not use this feature unless you fully
understand the implications of this.
* --pgp7 mode automatically sets all necessary options to ensure
that the resulting message will be usable by a user of PGP 7.x.
* New --attribute-fd command for frontends and scripts to get the
contents of attribute packets (i.e. photos)
* In expert mode, the user can now re-sign a v3 key with a v4
self-signature. This does not change the v3 key into a v4 key,
but it does allow the user to use preferences, primary ID flags,
etc.
* Significantly improved photo ID support on non-unixlike
platforms.
* The version number has jumped ahead to 1.1.90 to skip over the
old version 1.1 and to get ready for the upcoming 1.2.
* ElGamal sign and encrypt is not anymore allowed in the key
generation dialog unless in expert mode. RSA sign and encrypt
has been added with the same restrictions.
* [W32] Keyserver access does work with Windows NT.
Noteworthy changes in version 1.0.7 (2002-04-29)
------------------------------------------------
* Secret keys are now stored and exported in a new format which
uses SHA-1 for integrity checks. This format renders the
Rosa/Klima attack useless. Other OpenPGP implementations might
not yet support this, so the option --simple-sk-checksum creates
the old vulnerable format.
* The default cipher algorithm for encryption is now CAST5,
default hash algorithm is SHA-1. This will give us better
interoperability with other OpenPGP implementations.
* Symmetric encrypted messages now use a fixed file size if
possible. This is a tradeoff: it breaks PGP 5, but fixes PGP 2,
6, and 7. Note this was only an issue with RFC-1991 style
symmetric messages.
* Photographic user ID support. This uses an external program to
view the images.
* Enhanced keyserver support via keyserver "plugins". GnuPG comes
with plugins for the NAI LDAP keyserver as well as the HKP email
keyserver. It retains internal support for the HKP HTTP
keyserver.
* Nonrevocable signatures are now supported. If a user signs a
key nonrevocably, this signature cannot be taken back so be
careful!
* Multiple signature classes are usable when signing a key to
specify how carefully the key information (fingerprint, photo
ID, etc) was checked.
* --pgp2 mode automatically sets all necessary options to ensure
that the resulting message will be usable by a user of PGP 2.x.
* --pgp6 mode automatically sets all necessary options to ensure
that the resulting message will be usable by a user of PGP 6.x.
* Signatures may now be given an expiration date. When signing a
key with an expiration date, the user is prompted whether they
want their signature to expire at the same time.
* Revocation keys (designated revokers) are now supported if
present. There is currently no way to designate new keys as
designated revokers.
* Permissions on the .gnupg directory and its files are checked
for safety.
* --expert mode enables certain silly things such as signing a
revoked user id, expired key, or revoked key.
* Some fixes to build cleanly under Cygwin32.
* New tool gpgsplit to split OpenPGP data formats into packets.
* New option --preserve-permissions.
* Subkeys created in the future are not used for encryption or
signing unless the new option --ignore-valid-from is used.
* Revoked user-IDs are not listed unless signatures are listed too
or we are in verbose mode.
* There is no default comment string with ascii armors anymore
except for revocation certificates and --enarmor mode.
* The command "primary" in the edit menu can be used to change the
primary UID, "setpref" and "updpref" can be used to change the
preferences.
* Fixed the preference handling; since 1.0.5 they were erroneously
matched against against the latest user ID and not the given one.
* RSA key generation.
* Merged Stefan's patches for RISC OS in. See comments in
scripts/build-riscos.
* It is now possible to sign and conventional encrypt a message (-cs).
* The MDC feature flag is supported and can be set by using
the "updpref" edit command.
* The status messages GOODSIG and BADSIG are now returning the primary
UID, encoded using %XX escaping (but with spaces left as spaces,
so that it should not break too much)
* Support for GDBM based keyrings has been removed.
* The entire keyring management has been revamped.
* The way signature stati are store has changed so that v3
signatures can be supported. To increase the speed of many
operations for existing keyrings you can use the new
--rebuild-keydb-caches command.
* The entire key validation process (trustdb) has been revamped.
See the man page entries for --update-trustdb, --check-trustdb
and --no-auto-check-trustdb.
* --trusted-keys is again obsolete, --edit can be used to set the
ownertrust of any key to ultimately trusted.
* A subkey is never used to sign keys.
* Read only keyrings are now handled as expected.
Noteworthy changes in version 1.0.6 (2001-05-29)
------------------------------------------------
* Security fix for a format string bug in the tty code.
* Fixed format string bugs in all PO files.
* Removed Russian translation due to too many bugs. The FTP
server has an unofficial but better translation in the contrib
directory.
* Fixed expire time calculation and keyserver access.
* The usual set of minor bug fixes and enhancements.
* non-writable keyrings are now correctly handled.
Noteworthy changes in version 1.0.5 (2001-04-29)
------------------------------------------------
* WARNING: The semantics of --verify have changed to address a
problem with detached signature detection. --verify now ignores
signed material given on stdin unless this is requested by using
a "-" as the name for the file with the signed material. Please
check all your detached signature handling applications and make
sure that they don't pipe the signed material to stdin without
using a filename together with "-" on the the command line.
* WARNING: Corrected hash calculation for input data larger than
512M - it was just wrong, so you might notice bad signature in
some very big files. It may be wise to keep an old copy of
GnuPG around.
* Secret keys are no longer imported unless you use the new option
--allow-secret-key-import. This is a kludge and future versions will
handle it in another way.
* New command "showpref" in the --edit-key menu to show an easier
to understand preference listing.
* There is now the notation of a primary user ID. For example, it
is printed with a signature verification as the first user ID;
revoked user IDs are not printed there anymore. In general the
primary user ID is the one with the latest self-signature.
* New --charset=utf-8 to bypass all internal conversions.
* Large File Support (LFS) is now working.
* New options: --ignore-crc-error, --no-sig-create-check,
--no-sig-cache, --fixed-list-mode, --no-expensive-trust-checks,
--enable-special-filenames and --use-agent. See man page.
* New command --pipemode, which can be used to run gpg as a
co-process. Currently only the verification of detached
signatures are working. See doc/DETAILS.
* Keyserver support for the W32 version.
* Rewritten key selection code so that GnuPG can better cope with
multiple subkeys, expire dates and so. The drawback is that it
is slower.
* A whole lot of bug fixes.
* The verification status of self-signatures are now cached. To
increase the speed of key list operations for existing keys you
can do the following in your GnuPG homedir (~/.gnupg):
cp pubring.gpg pubring.gpg.save && gpg --export-all >x && \
rm pubring.gpg && gpg --import x
Only v4 keys (i.e not the old RSA keys) benefit from this caching.
* New translations: Estonian, Turkish.
Noteworthy changes in version 1.0.4 (2000-10-17)
------------------------------------------------
* Fixed a serious bug which could lead to false signature verification
results when more than one signature is fed to gpg. This is the
primary reason for releasing this version.
* New utility gpgv which is a stripped down version of gpg to
be used to verify signatures against a list of trusted keys.
* Rijndael (AES) is now supported and listed with top preference.
* --with-colons now works with --print-md[s].
Noteworthy changes in version 1.0.3 (2000-09-18)
------------------------------------------------
* Fixed problems with piping to/from other MS-Windows software
* Expiration time of the primary key can be changed again.
* Revoked user IDs are now marked in the output of --list-key
* New options --show-session-key and --override-session-key
to help the British folks to somewhat minimize the danger
of this Orwellian RIP bill.
* New options --merge-only and --try-all-secrets.
* New configuration option --with-egd-socket.
* The --trusted-key option is back after it left us with 0.9.5
* RSA is supported. Key generation does not yet work but will come
soon.
* CAST5 and SHA-1 are now the default algorithms to protect the key
and for symmetric-only encryption. This should solve a couple
of compatibility problems because the old algorithms are optional
according to RFC2440
* Twofish and MDC enhanced encryption is now used. PGP 7 supports
this. Older versions of GnuPG don't support it, so they should be
upgraded to at least 1.0.2
Noteworthy changes in version 1.0.2 (2000-07-12)
----------------------------------------------
* Fixed expiration handling of encryption keys.
* Add an experimental feature to do unattended key generation.
* The user is now asked for the reason of revocation as required
by the new OpenPGP draft.
* There is a ~/.gnupg/random_seed file now which saves the
state of the internal RNG and increases system performance
somewhat. This way the full entropy source is only used in
cases were it is really required.
Use the option --no-random-seed-file to disable this feature.
* New options --ignore-time-conflict and --lock-never.
* Some fixes for the W32 version.
* The entropy.dll is not anymore used by the W32 version but replaced
by code derived from Cryptlib.
* Encryption is now much faster: About 2 times for 1k bit keys
and 8 times for 4k keys.
* New encryption keys are generated in a way which allows a much
faster decryption.
* New command --export-secret-subkeys which outputs the
the _primary_ key with it's secret parts deleted. This is
useful for automated decryption/signature creation as it
allows to keep the real secret primary key offline and
thereby protecting the key certificates and allowing to
create revocations for the subkeys. See the FAQ for a
procedure to install such secret keys.
* Keygeneration now writes to the first writeable keyring or
as default to the one in the homedirectory. Prior versions
ignored all --keyring options.
* New option --command-fd to take user input from a file descriptor;
to be used with --status-fd by software which uses GnuPG as a backend.
* There is a new status PROGRESS which is used to show progress during
key generation.
* Support for the new MDC encryption packets. To create them either
--force-mdc must be use or cipher algorithm with a blocksize other
than 64 bits is to be used. --openpgp currently disables MDC packets
entirely. This option should not yet be used.
* New option --no-auto-key-retrieve to disable retrieving of
a missing public key from a keyserver, when a keyserver has been set.
* Danish translation
Noteworthy changes in version 1.0.1 (1999-12-16)
-----------------------------------
* New command --verify-files. New option --fast-list-mode.
* $http_proxy is now used when --honor-http-proxy is set.
* Fixed some minor bugs and the problem with conventional encrypted
packets which did use the gpg v3 partial length headers.
* Add Indonesian and Portugese translations.
* Fixed a bug with symmetric-only encryption using the non-default 3DES.
The option --emulate-3des-s2k-bug may be used to decrypt documents
which have been encrypted this way; this should be done immediately
as this workaround will be remove in 1.1
* Can now handle (but not display) PGP's photo IDs. I don't know the
format of that packet but after stripping a few bytes from the start
it looks like a JPEG (at least my test data). Handling of this
package is required because otherwise it would mix up the
self signatures and you can't import those keys.
* Passing non-ascii user IDs on the commandline should now work in all
cases.
* New keys are now generated with an additional preference to Blowfish.
* Removed the GNU Privacy Handbook from the distribution as it will go
into a separate one.
Noteworthy changes in version 1.0.0 (1999-09-07)
-----------------------------------
* Add a very preliminary version of the GNU Privacy Handbook to
the distribution (lynx doc/gph/index.html).
* Changed the version number to GnuPG 2001 ;-)
Noteworthy changes in version 0.9.11
------------------------------------
* UTF-8 strings are now correctly printed (if --charset is set correctly).
Output of --with-colons remains C-style escaped UTF-8.
* Workaround for a problem with PGP 5 detached signature in textmode.
* Fixed a problem when importing new subkeys (duplicated signatures).
Noteworthy changes in version 0.9.10
------------------------------------
* Some strange new options to help pgpgpg
* Cleaned up the dox a bit.
Noteworthy changes in version 0.9.9
-----------------------------------
* New options --[no-]utf8-strings.
* New edit-menu commands "enable" and "disable" for entire keys.
* You will be asked for a filename if gpg cannot deduce one.
* Changes to support libtool which is needed for the development
of libgcrypt.
* New script tools/lspgpot to help transferring assigned
trustvalues from PGP to GnuPG.
* New commands --lsign-key and made --sign-key a shortcut for --edit
and sign.
* New options (#122--126 ;-) --[no-]default-recipient[-self],
--disable-{cipher,pubkey}-algo. See the man page.
* Enhanced info output in case of multiple recipients and fixed exit code.
* New option --allow-non-selfsigned-uid to work around a problem with
the German IN way of separating signing and encryption keys.
Noteworthy changes in version 0.9.8
-----------------------------------
* New subcommand "delsig" in the edit menu.
* The name of the output file is not anymore the one which is
embedded in the processed message, but the used filename with
the extension stripped. To revert to the old behaviour you can
use the option --use-embedded-filename.
* Another hack to cope with pgp2 generated detached signatures.
* latin-2 character set works (--charset=iso-8859-2).
* New option --with-key-data to list the public key parameters.
New option -N to insert notations and a --set-policy-url.
A couple of other options to allow reseting of options.
* Better support for HPUX.
Noteworthy changes in version 0.9.7
-----------------------------------
* Add some work arounds for a bugs in pgp 2 which led to bad signatures
when used with canonical texts in some cases.
* Enhanced some status outputs.
Noteworthy changes in version 0.9.6
-----------------------------------
* Twofish is now statically linked by default. The experimental 128 bit
version is now disabled. Full support will be available as soon as
the OpenPGP WG has decided on an interpretation of rfc2440.
* Dropped support for the ancient Blowfish160 which is not OpenPGP.
* Merged gpgm and gpg into one binary.
* Add "revsig" and "revkey" commands to the edit menu. It is now
possible to revoke signature and subkeys.
Noteworthy changes in version 0.9.5
-----------------------------------
* New command "lsign" in the keyedit menu to create non-exportable
signatures. Removed --trusted-keys option.
* A bunch of changes to the key validation code.
* --list-trust-path now has an optional --with-colons format.
* New command --recv-keys to import keys from an keyserver.
Noteworthy changes in version 0.9.4
-----------------------------------
* New configure option --enable-static-rnd=[egd|linux|unix|none]
to select a random gathering module for static linking.
* The original text is now verbatim copied to a cleartext signed message.
* Bugfixes but there are still a couple of bugs.
Noteworthy changes in version 0.9.3
-----------------------------------
* Changed the internal design of getkey which now allows a
efficient lookup of multiple keys and add a word match mode.
* New options --[no-]encrypt-to.
* Some changes to the configure stuff. Switched to automake 1.4.
Removed intl/ from CVS, autogen.sh now uses gettextize.
* Preferences now include Twofish. Removed preference to Blowfish with
a special hack to suppress the "not listed in preferences" warning;
this is to allow us to switch completely to Twofish in the near future.
* Changed the locking stuff.
* Print all user ids of a good signature.
Noteworthy changes in version 0.9.2
-----------------------------------
* add some additional time warp checks.
* Option --keyserver and command --send-keys to utilize HKP servers.
* Upgraded to zlib 1.1.3 and fixed an inflate bug
* More cleanup on the cleartext signatures.
Noteworthy changes in version 0.9.1
-----------------------------------
* Polish language support.
* When querying the passphrase, the key ID of the primary key is
displayed along with the one of the used secondary key.
* Fixed a bug occurring when decrypting pgp 5 encrypted messages,
fixed an infinite loop bug in the 3DES code and in the code
which looks for trusted signatures.
* Fixed a bug in the mpi library which caused signatures not to
compare okay.
* Rewrote the handling of cleartext signatures; the code is now
better maintainable (I hope so).
* New status output VALIDSIG only for valid signatures together
with the fingerprint of the signer's key.
Noteworthy changes in version 0.9.0
-----------------------------------
* --export does now only exports rfc2440 compatible keys; the
old behaviour is available with --export-all.
Generation of v3 ElGamal (sign and encrypt) keys is not longer
supported.
* Fixed the uncompress bug.
* Rewrote the rndunix module. There are two environment variables
used for debugging now: GNUPG_RNDUNIX_DBG give the file to write
debugging information (use "-" for stdout) and if GNUPG_RNDUNIX_DBGALL
is set, all programs which are only tried are also printed.
* New option --escape-from-lines to "dash-escape" "From " lines to
prevent mailers to change them to ">From ". This is not enabled by
default because it is not in compliance with rfc2440 - however, you
should turn it on.
Noteworthy changes in version 0.4.5
-----------------------------------
* The keyrings and the trustdb is now locked, so that
other GnuPG processes won't damage these files. You
may want to put the option --lock-once into your options file.
* The latest self-signatures are now used; this enables --import
to see updated preferences etc.
* Import of subkeys should now work.
* Random gathering modules may now be loaded as extensions. Add
such a module for most Unices but it is very experimental!
* Brazilian language support.
Noteworthy changes in version 0.4.4
-----------------------------------
* Fixed the way the key expiration time is stored. If you have
an expiration time on your key you should fix it with --edit-key
and the command "expire". I apologize for this inconvenience.
* Add option --charset to support "koi8-r" encoding of user ids.
(Not yet tested).
* Preferences should now work again. You should run
"gpgm --check-trustdb \*" to rebuild all preferences.
* Checking of certificates should now work but this needs a lot
of testing. Key validation values are now cached in the
trustdb; they should be recalculated as needed, but you may
use --check-trustdb or --update-trustdb to do this.
* Spanish translation by Urko Lusa.
* Patch files are from now on signed. See the man page
for the new option --not-dash-escaped.
* New syntax: --edit-key <userID> [<commands>]
If you run it without --batch the commands are executed and then
you are put into normal mode unless you use "quit" or "save" as
one of the commands. When in batch mode, the program quits after
the last command, so you have to use "save" if you did some changes.
It does not yet work completely, but may be used to list so the
keys etc.
Noteworthy changes in version 0.4.3
-----------------------------------
* Fixed the gettext configure bug.
* Kludge for RSA keys: keyid and length of a RSA key are
correctly reported, but you get an error if you try to use
this key (If you do not have the non-US version).
* Experimental support for keyrings stored in a GDBM database.
This is *much* faster than a standard keyring. You will notice
that the import gets slower with time; the reason is that all
new keys are used to verify signatures of previous inserted
keys. Use "--keyring gnupg-gdbm:<name-of-gdbm-file>". This is
not (yet) supported for secret keys.
* A Russian language file in the distribution (alternatives are in
the contrib directory of the FTP servers)
* commandline option processing now works as expected for GNU programs
with the exception that you can't mix options and normal arguments.
* Now --list-key lists all matching keys. This is needed in some
other places too.
Noteworthy changes in version 0.4.2
-----------------------------------
* This is only a snapshot: There are still a few bugs.
* Fixed this huge memory leak.
* Redesigned the trust database: You should run "gpgm --check-trustdb".
New command --update-trustdb, which adds new key from the public
keyring into your trustdb
* Fixed a bug in the armor code, leading to invalid packet errors.
(a workaround for this was to use --no-armor). The shorten line
length (64 instead of 72) fixes a problem with pgp5 and keyservers.
* comment packets are not anymore generated. "--export" filters
them out. One Exception: The comment packets in a secret keyring
are still used because they carry the factorization of the public
prime product.
* --import now only looks for KEYBLOCK headers, so you can now simply
remove the "- " in front of such a header if someone accidently signed
such a message or the keyblock is part of a cleartext signed message.
* --with-colons now lists the key expiration time and not anymore
the valid period.
* Some keyblocks created with old releases have a wrong sequence
of packets, so that the keyservers don't accept these keys.
Simply using "--edit-key" fixes the problem.
* New option --force-v3-sigs to generate signed messages which are
compatible to PGP 5.
* Add some code to support DLD (for non ELF systems) - but this is
not tested because my BSD box is currently broken.
* New command "expire" in the edit-key menu.
Noteworthy changes in version 0.4.1
-----------------------------------
* A secondary key is used when the primary key is specified but cannot
be used for the operation (if it is a sign-only key).
* GNUPG can now handle concatenated armored messages: There is still a
bug if different kinds of messages are mixed.
* Iterated+Salted passphrases now work. If want to be sure that PGP5
is able to handle them you may want to use the options
"--s2k-mode 3 --s2k-cipher-algo cast5 --s2k-digest-algo sha1"
when changing a passphrase.
* doc/OpenPGP talks about OpenPGP compliance, doc/HACKING gives
a few hints about the internal structure.
* Checked gnupg against the August 1998 draft (07) and I believe
it is in compliance with this document (except for one point).
* Fixed some bugs in the import merging code and rewrote some
code for the trustdb.
Noteworthy changes in version 0.4.0
-----------------------------------
* Triple DES is now supported. Michael Roth did this piece of
needed work. We have now all the coded needed to be OpenPGP
compliant.
* Added a simple rpm spec file (see INSTALL).
* detached and armored signatures are now using "PGP SIGNATURE",
except when --rfc1991 is used.
* All times which are not in the yyyy-mm-dd format are now printed
in local time.
Noteworthy changes in version 0.3.5
-----------------------------------
* New option --throw-keyid to create anonymous enciphered messages.
If gpg detects such a message it tires all available secret keys
in turn so decode it. This is a gnupg extension and not in OpenPGP
but it has been discussed there and afaik some products use this
scheme too (Suggested by Nimrod Zimmerman).
* Fixed a bug with 5 byte length headers.
* --delete-[secret-]key is now also available in gpgm.
* cleartext signatures are not anymore converted to LF only.
* Fixed a trustdb problem. Run "gpgm --check-trustdb" to fix old
trust dbs.
* Building in another directory should now work.
* Weak key detection mechanism (Niklas Hernaeus).
Noteworthy changes in version 0.3.4
-----------------------------------
* New options --comment and --set-filename; see g10/OPTIONS
* yes/no, y/n localized.
* Fixed some bugs.
Noteworthy changes in version 0.3.3
-----------------------------------
* IMPORTANT: I found yet another bug in the way the secret keys
are encrypted - I did it the way pgp 2.x did it, but OpenPGP
and pgp 5.x specify another (in some aspects simpler) method.
To convert your secret keys you have to do this:
1. Build the new release but don't install it and keep
a copy of the old program.
2. Disable the network, make sure that you are the only
user, be sure that there are no Trojan horses etc ....
3. Use your old gpg (version 0.3.[12]) and set the
passphrases of ALL your secret keys to empty!
(gpg --change-passphrase your-user-id).
4. Save your ownertrusts (see the next point)
5. rm ~/.gnupg/trustdb.gpg
6. install the new version of gpg (0.3.3)
7. For every secret key call "gpg --edit-key your-user-id",
enter "passwd" at the prompt, follow the instructions and
change your password back, enter "save" to store it.
8. Restore the ownertrust (see next point).
* The format of the trust database has changed; you must delete
the old one, so gnupg can create a new one.
IMPORTANT: Use version 0.3.[12] to save your assigned ownertrusts
("gpgm --list-ownertrust >saved-trust"); then build this new version
and restore the ownertrust with this new version
("gpgm --import-ownertrust saved-trust"). Please note that
--list-ownertrust has been renamed to --export-ownertrust in this
release and it does now only export defined ownertrusts.
* The command --edit-key now provides a commandline driven menu
which can be used for various tasks. --sign-key is only an
an alias to --edit-key and maybe removed in future: use the
command "sign" of this new menu - you can select which user ids
you want to sign.
* Alternate user ids can now be created an signed.
* Owner trust values can now be changed with --edit-key (trust)
* GNUPG can now run as a coprocess; this enables sophisticated
frontends. tools/shmtest.c is a simple sample implementation.
This needs some more work: all tty_xxx() are to be replaced
by cpr_xxx() and some changes in the display logics is needed.
* Removed options --gen-prime and --gen-random.
* Removed option --add-key; use --edit-key instead.
* Removed option --change-passphrase; use --edit-key instead.
* Signatures are now checked even if the output file could not
be created. Command "--verify" tries to find the detached data.
* gpg now disables core dumps.
* compress and symmetric cipher preferences are now used.
Because there is no 3DES yet, this is replaced by Blowfish.
* We have added the Twofish as an experimental cipher algorithm.
Many thanks to Matthew Skala for doing this work.
Twofish is the AES submission from Schneier et al.; see
"www.counterpane.com/twofish.html" for more information.
* Started with a help system: If you enter a question mark at some
prompt; you should get a specific help for this prompt.
* There is no more backup copy of the secret keyring.
* A lot of new bugs. I think this release is not as stable as
the previous one.
Noteworthy changes in version 0.3.2
-----------------------------------
* Fixed some bugs when using --textmode (-seat)
* Now displays the trust status of a positive verified message.
* Keyrings are now scanned in the sequence they are added with
--[secret-]keyring. Note that the default keyring is implicitly
added as the very first one unless --no-default-keyring is used.
* Fixed setuid and dlopen bug.
Noteworthy changes in version 0.3.1
-----------------------------------
* Partial headers are now written in the OpenPGP format if
a key in a v4 packet is used.
* Removed some unused options, removed the gnupg.sig stuff.
* Key lookup by name now returns a key which can be used for
the desired action.
* New options --list-ownertrust (gpgm) to make a backup copy
of the ownertrust values you assigned.
* clear signature headers are now in compliance with OpenPGP.
Noteworthy changes in version 0.3.0
-----------------------------------
* New option --emulate-checksum-bug. If your passphrase does not
work anymore, use this option and --change-passphrase to rewrite
your passphrase.
* More complete v4 key support: Preferences and expiration time
is set into the self signature.
* Key generation defaults to DSA/ElGamal keys, so that new keys are
interoperable with pgp5
* DSA key generation is faster and key generation does not anymore
remove entropy from the random generator (the primes are public
parameters, so there is really no need for a cryptographic secure
prime number generator which we had used).
* A complete new structure for representing the key parameters.
* Removed most public key knowledge into the cipher library.
* Support for dynamic loading of new algorithms.
* Moved tiger to an extension module.
Noteworthy changes in version 0.2.19
------------------------------------
* Replaced /dev/urandom in checks with new tool mk-tdata.
* Some assembler file cleanups; some more functions for the Alpha.
* Tiger has now the OpenPGP assigned number 6. Because the OID has
changed, old signatures using this algorithm can't be verified.
* gnupg now encrypts the compressed packed and not any longer in the
reverse order; anyway it can decrypt both versions. Thanks to Tom
for telling me this (not security related) bug.
* --add-key works and you are now able to generate subkeys.
* It is now possible to generate ElGamal keys in v4 packets to create
valid OpenPGP keys.
* Some new features for better integration into MUAs.
Noteworthy changes in version 0.2.18
------------------------------------
* Splitted cipher/random.c, add new option "--disable-dev-random"
to configure to support the development of a random source for
other systems. Prepared sourcefiles rand-unix.c, rand-w32.c
and rand-dummy.c (which is used to allow compilation on systems
without a random source).
* Fixed a small bug in the key generation (it was possible that 48 bits
of a key were not taken from the random pool)
* Add key generation for DSA and v4 signatures.
* Add a function trap_unaligned(), so that a SIGBUS is issued on
Alphas and not the slow emulation code is used. And success: rmd160
raised a SIGBUS.
* Enhanced the formatting facility of argparse and changed the use of
\r,\v to @ because gettext does not like it.
* New option "--compress-algo 1" to allow the creation of compressed
messages which are readable by PGP and "--print-md" (gpgm) to make
speed measurement easier.
Noteworthy changes in version 0.2.17
------------------------------------
* Comment packets are now of private type 61.
* Passphrase code still used a 160 bit blowfish key, added a
silly workaround. Please change your passphrase again - sorry.
* Conventional encryption now uses a type 3 packet to describe the
used algorithms.
* The new algorithm number for Blowfish is 20, 16 is still used for
encryption only; for signing it is only used when it is in a v3 packet,
so that GNUPG keys are still valid.
Noteworthy changes in version 0.2.16
------------------------------------
* Add experimental support for the TIGER/192 message digest algorithm.
(But there is only a dummy ASN OID).
* Standard cipher is now Blowfish with 128 bit key in OpenPGP's CFB
mode. I renamed the old cipher to Blowfish160. Because the OpenPGP
group refused to assign me a number for Blowfish160, I have to
drop support for this in the future. You should use
"--change-passphrase" to recode your current passphrase with 128
bit Blowfish.
Noteworthy changes in version 0.2.15
------------------------------------
* Fixed a bug with the old checksum calculation for secret keys.
If you run the program without --batch, a warning does inform
you if your secret key needs to be converted; simply use
--change-passphrase to recalculate the checksum. Please do this
soon, as the compatible mode will be removed sometime in the future.
* CAST5 works (using the PGP's special CFB mode).
* Again somewhat more PGP 5 compatible.
* Some new test cases
Noteworthy changes in version 0.2.14
------------------------------------
* Changed the internal handling of keyrings.
* Add support to list PGP 5 keyrings with subkeys
* Timestamps of signatures are now verified.
* A expiration time can now be specified during key generation.
* Some speedups for Blowfish and SHA-1, rewrote SHA-1 transform.
Reduced the amount of random bytes needed for key generation in
some cases.
Noteworthy changes in version 0.2.13
------------------------------------
* Verify of DSA signatures works.
* Re-implemented the slower random number generator.
Noteworthy changes in version 0.2.12
------------------------------------
* --delete-key checks that there is no secret key. The new
option --delete-secret-key maybe used to delete a secret key.
* "-kv" now works as expected. Options "--list-{keys,sigs]"
and "--check-sigs" are now working.
* New options "--verify" and "--decrypt" to better support integration
into MUAs (partly done for Mutt).
* New option "--with-colons" to make parsing of key lists easier.
Noteworthy changes in version 0.2.11
------------------------------------
* GPG now asks for a recipient's name if option "-r" is not used.
* If there is no good trust path, the program asks whether to use
the public keys anyway.
* "--delete-key" works for public keys. What semantics shall I use
when there is a secret key too? Delete the secret key or leave him
and auto-regenerate the public key, next time the secret key is used?
Noteworthy changes in version 0.2.10
------------------------------------
* Code for the alpha is much faster (about 20 times); the data
was misaligned and the kernel traps this, so nearly all time
was used by system to trap the misalignments and to write
syslog messages. Shame on me and thanks to Ralph for
pointing me at this while drinking some beer yesterday.
* Changed some configure options and add an option
--disable-m-guard to remove the memory checking code
and to compile everything with optimization on.
* New environment variable GNUPGHOME, which can be used to set
another homedir than ~/.gnupg. Changed default homedir for
Windoze version to c:/gnupg.
* Fixed detached signatures; detached PGP signatures caused a SEGV.
* The Windoze version works (as usual w/o a strong RNG).
Noteworthy changes in version 0.2.9
-----------------------------------
* Fixed FreeBSD bug.
* Added a simple man page.
* Switched to automake1.2f and a newer gettext.
Noteworthy changes in version 0.2.8
-----------------------------------
* Changed the name to GNUPG, the binaries are called gpg and gpgm.
You must rename rename the directory "~/.g10" to ~/.gnupg/, rename
{pub,sec}ring.g10 to {pub,sec}ring.gpg, trustdb.g10 to trustdb.gpg
and g10.sig to gnupg.sig.
* New or changed passphrases are now salted.
Noteworthy changes in version 0.2.7
-----------------------------------
* New command "gen-revoke" to create a key revocation certificate.
* New option "homedir" to set the homedir (which defaults to "~/.g10").
This directory is created if it does not exists (only the last
part of the name and not the complete hierarchy)
* Command "import" works. (Try: "finger gcrypt@ftp.guug.de|g10 --import")
* New commands "dearmor/enarmor" for g10maint. These are mainly
used for internal test purposes.
* Option --version now conforming to the GNU standards and lists
the available ciphers, message digests and public key algorithms.
* Assembler code for m68k (not tested).
* "make check" works.
Noteworthy changes in version 0.2.6
-----------------------------------
* Option "--export" works.
Noteworthy changes in version 0.2.5
-----------------------------------
* Added zlib for systems which don't have it.
Use "./configure --with-zlib" to link with the static version.
* Generalized some more functions and rewrote the encoding of
message digests into MPIs.
* Enhanced the checkit script
Noteworthy changes in version 0.2.4
-----------------------------------
* nearly doubled the speed of the ElGamal signature verification.
* backup copies of keyrings are created.
* assembler stuff for Pentium; gives about 15% better performance.
* fixed a lot of bugs.
Noteworthy changes in version 0.2.3
-----------------------------------
* Found a bug in the calculation of ELG fingerprints. This is now
fixed, but all existing fingerprints and keyids for ELG keys
are not any more valid.
* armor should now work; including clear signed text.
* moved some options to the new program g10maint
* It's now 64 bit clean and runs fine on an alpha--linux.
* Key generation is much faster now. I fixed this by using not
so strong random number for the primes (this was a bug because the
ElGamal primes are public parameters and it does not make sense
to generate them from strong random). The real secret is the x value
which is still generated from strong (okay: /dev/random) random bits.
* added option "--status-fd": see g10/OPTIONS
* We have secure memory on systems which support mlock().
It is not complete yet, because we do not have signal handler
which does a cleanup in very case.
We should also check the ulimit for the user in the case
that the admin does not have set a limit on locked pages.
* started with internationalization support.
* The logic to handle the web of trust is now implemented. It is
has some bugs; but I'm going to change the algorithm anyway.
It works by calculating the trustlevel on the fly. It may ask
you to provide trust parameters if the calculated trust probability
is too low. I will write a paper which discusses this new approach.
* a couple of changes to the configure script.
* New option "--quick-random" which uses a much quicker random
number generator. Keys generated while this option is in effect
are flags with "INSECURE!" in the user-id. This is a development
only option.
* Read support for new version packets (OpenPGP).
* Comment packets are now of correct OpenPGP type 16. Old comment
packets written by G10 are detected because they always start with
a hash which is an invalid version byte.
* The string "(INSECURE!)" is appended to a new user-id if this
is generated on a system without a good random number generator.
Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005, 2006 Free Software Foundation, Inc.
This file is free software; as a special exception the author gives
unlimited permission to copy and/or distribute it, with or without
modifications, as long as this notice is preserved.
This file is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
diff --git a/acinclude.m4 b/acinclude.m4
index 30eeb85d6..149a48506 100644
--- a/acinclude.m4
+++ b/acinclude.m4
@@ -1,779 +1,782 @@
dnl macros to configure gnupg
dnl Copyright (C) 1998, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
dnl
dnl This file is part of GnuPG.
dnl
dnl GnuPG is free software; you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
dnl the Free Software Foundation; either version 2 of the License, or
dnl (at your option) any later version.
dnl
dnl GnuPG is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
dnl GNU General Public License for more details.
dnl
dnl You should have received a copy of the GNU General Public License
dnl along with this program; if not, write to the Free Software
dnl Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
dnl GNUPG_MSG_PRINT(STRING)
dnl print a message
dnl
define(GNUPG_MSG_PRINT,
[ echo $ac_n "$1"" $ac_c" 1>&AC_FD_MSG
])
dnl GNUPG_CHECK_TYPEDEF(TYPE, HAVE_NAME)
dnl Check whether a typedef exists and create a #define $2 if it exists
dnl
AC_DEFUN([GNUPG_CHECK_TYPEDEF],
[ AC_MSG_CHECKING(for $1 typedef)
AC_CACHE_VAL(gnupg_cv_typedef_$1,
[AC_TRY_COMPILE([#define _GNU_SOURCE 1
#include <stdlib.h>
#include <sys/types.h>], [
#undef $1
int a = sizeof($1);
], gnupg_cv_typedef_$1=yes, gnupg_cv_typedef_$1=no )])
AC_MSG_RESULT($gnupg_cv_typedef_$1)
if test "$gnupg_cv_typedef_$1" = yes; then
AC_DEFINE($2,1,[Defined if a `]$1[' is typedef'd])
fi
])
dnl GNUPG_CHECK_GNUMAKE
dnl
AC_DEFUN([GNUPG_CHECK_GNUMAKE],
[
if ${MAKE-make} --version 2>/dev/null | grep '^GNU ' >/dev/null 2>&1; then
:
else
AC_MSG_WARN([[
***
*** It seems that you are not using GNU make. Some make tools have serious
*** flaws and you may not be able to build this software at all. Before you
*** complain, please try GNU make: GNU make is easy to build and available
*** at all GNU archives. It is always available from ftp.gnu.org:/gnu/make.
***]])
fi
])
dnl GNUPG_CHECK_FAQPROG
dnl
AC_DEFUN([GNUPG_CHECK_FAQPROG],
[ AC_MSG_CHECKING(for faqprog.pl)
if faqprog.pl -V 2>/dev/null | grep '^faqprog.pl ' >/dev/null 2>&1; then
working_faqprog=yes
FAQPROG="faqprog.pl"
else
working_faqprog=no
FAQPROG=": "
fi
AC_MSG_RESULT($working_faqprog)
AC_SUBST(FAQPROG)
AM_CONDITIONAL(WORKING_FAQPROG, test "$working_faqprog" = "yes" )
dnl if test $working_faqprog = no; then
dnl AC_MSG_WARN([[
dnl ***
dnl *** It seems that the faqprog.pl program is not installed;
dnl *** however it is only needed if you want to change the FAQ.
dnl *** (faqprog.pl should be available at:
dnl *** ftp://ftp.gnupg.org/gcrypt/contrib/faqprog.pl )
dnl *** No need to worry about this warning.
dnl ***]])
dnl fi
])
dnl GNUPG_CHECK_DOCBOOK_TO_TEXI
dnl
AC_DEFUN([GNUPG_CHECK_DOCBOOK_TO_TEXI],
[
AC_CHECK_PROG(DOCBOOK_TO_TEXI, docbook2texi, yes, no)
AC_MSG_CHECKING(for sgml to texi tools)
working_sgmltotexi=no
if test "$ac_cv_prog_DOCBOOK_TO_TEXI" = yes; then
if sgml2xml -v /dev/null 2>&1 | grep 'SP version' >/dev/null 2>&1 ; then
working_sgmltotexi=yes
fi
fi
AC_MSG_RESULT($working_sgmltotexi)
AM_CONDITIONAL(HAVE_DOCBOOK_TO_TEXI, test "$working_sgmltotexi" = "yes" )
])
dnl GNUPG_CHECK_ENDIAN
dnl define either LITTLE_ENDIAN_HOST or BIG_ENDIAN_HOST
dnl
define([GNUPG_CHECK_ENDIAN],
[
tmp_assumed_endian=big
if test "$cross_compiling" = yes; then
case "$host_cpu" in
i@<:@345678@:>@* )
tmp_assumed_endian=little
;;
*)
;;
esac
AC_MSG_WARN(cross compiling; assuming $tmp_assumed_endian endianess)
fi
AC_MSG_CHECKING(endianess)
AC_CACHE_VAL(gnupg_cv_c_endian,
[ gnupg_cv_c_endian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
AC_TRY_COMPILE([#include <sys/types.h>
#include <sys/param.h>], [
#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
bogus endian macros
#endif], [# It does; now see whether it defined to BIG_ENDIAN or not.
AC_TRY_COMPILE([#include <sys/types.h>
#include <sys/param.h>], [
#if BYTE_ORDER != BIG_ENDIAN
not big endian
#endif], gnupg_cv_c_endian=big, gnupg_cv_c_endian=little)])
if test "$gnupg_cv_c_endian" = unknown; then
AC_TRY_RUN([main () {
/* Are we little or big endian? From Harbison&Steele. */
union
{
long l;
char c[sizeof (long)];
} u;
u.l = 1;
exit (u.c[sizeof (long) - 1] == 1);
}],
gnupg_cv_c_endian=little,
gnupg_cv_c_endian=big,
gnupg_cv_c_endian=$tmp_assumed_endian
)
fi
])
AC_MSG_RESULT([$gnupg_cv_c_endian])
if test "$gnupg_cv_c_endian" = little; then
AC_DEFINE(LITTLE_ENDIAN_HOST,1,
[Defined if the host has little endian byte ordering])
else
AC_DEFINE(BIG_ENDIAN_HOST,1,
[Defined if the host has big endian byte ordering])
fi
])
dnl GNUPG_CHECK_CACHE
dnl
define(GNUPG_CHECK_CACHE,
[ AC_MSG_CHECKING(cached information)
gnupg_hostcheck="$target"
AC_CACHE_VAL(gnupg_cv_hostcheck, [ gnupg_cv_hostcheck="$gnupg_hostcheck" ])
if test "$gnupg_cv_hostcheck" != "$gnupg_hostcheck"; then
AC_MSG_RESULT(changed)
AC_MSG_WARN(config.cache exists!)
AC_MSG_ERROR(you must do 'make distclean' first to compile for
different target or different parameters.)
else
AC_MSG_RESULT(ok)
fi
])
######################################################################
# Check for -fPIC etc (taken from libtool)
# This sets CFLAGS_PIC to the required flags
# NO_PIC to yes if it is not possible to
# generate PIC
######################################################################
dnl GNUPG_CHECK_PIC
dnl
define(GNUPG_CHECK_PIC,
[ AC_MSG_CHECKING(for option to create PIC)
CFLAGS_PIC=
NO_PIC=no
if test "$cross_compiling" = yes; then
AC_MSG_RESULT(assume none)
else
if test "$GCC" = yes; then
CFLAGS_PIC="-fPIC"
else
case "$host_os" in
aix3* | aix4*)
# All rs/6000 code is PIC
# but is there any non-rs/6000 AIX platform?
;;
hpux9* | hpux10*)
CFLAGS_PIC="+Z"
;;
irix5* | irix6*)
# PIC (with -KPIC) is the default.
;;
osf3* | osf4*)
# FIXME - pic_flag is probably required for
# hppa*-osf* and i860-osf*
;;
sco3.2v5*)
CFLAGS_PIC='-Kpic'
;;
solaris2* | solaris7* )
CFLAGS_PIC='-KPIC'
;;
sunos4*)
CFLAGS_PIC='-PIC'
;;
*)
NO_PIC=yes
;;
esac
fi
case "$host_cpu" in
rs6000 | powerpc | powerpcle)
# Yippee! All RS/6000 and PowerPC code is position-independent.
CFLAGS_PIC=""
;;
esac
if test "$NO_PIC" = yes; then
AC_MSG_RESULT(not possible)
else
if test -z "$CFLAGS_PIC"; then
AC_MSG_RESULT(none)
else
AC_MSG_RESULT($CFLAGS_PIC)
fi
fi
fi
])
######################################################################
# Check for export-dynamic flag
# This sets CFLAGS_EXPORTDYNAMIC to the required flags
######################################################################
dnl GNUPG_CHECK_EXPORTDYNAMIC
dnl
define(GNUPG_CHECK_EXPORTDYNAMIC,
[ AC_MSG_CHECKING(how to specify -export-dynamic)
if test "$cross_compiling" = yes; then
AC_MSG_RESULT(assume none)
CFLAGS_EXPORTDYNAMIC=""
else
AC_CACHE_VAL(gnupg_cv_export_dynamic,[
if AC_TRY_COMMAND([${CC-cc} $CFLAGS -Wl,--version 2>&1 |
grep "GNU ld" >/dev/null]); then
# using gnu's linker
gnupg_cv_export_dynamic="-Wl,-export-dynamic"
else
case "$host_os" in
hpux* )
gnupg_cv_export_dynamic="-Wl,-E"
;;
* )
gnupg_cv_export_dynamic=""
;;
esac
fi
])
AC_MSG_RESULT($gnupg_cv_export_dynamic)
CFLAGS_EXPORTDYNAMIC="$gnupg_cv_export_dynamic"
fi
])
#####################################################################
# Check for SysV IPC (from GIMP)
# And see whether we have a SHM_LOCK (FreeBSD does not have it).
#####################################################################
dnl GNUPG_CHECK_IPC
dnl
define(GNUPG_CHECK_IPC,
[ AC_CHECK_HEADERS(sys/ipc.h sys/shm.h)
if test "$ac_cv_header_sys_shm_h" = "yes"; then
AC_MSG_CHECKING(whether IPC_RMID allowes subsequent attaches)
AC_CACHE_VAL(gnupg_cv_ipc_rmid_deferred_release,
AC_TRY_RUN([
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/shm.h>
int main()
{
int id;
char *shmaddr;
id = shmget (IPC_PRIVATE, 4, IPC_CREAT | 0777);
if (id == -1)
exit (2);
shmaddr = shmat (id, 0, 0);
shmctl (id, IPC_RMID, 0);
if ((char*) shmat (id, 0, 0) == (char*) -1)
{
shmdt (shmaddr);
exit (1);
}
shmdt (shmaddr);
shmdt (shmaddr);
exit (0);
}
],
gnupg_cv_ipc_rmid_deferred_release="yes",
gnupg_cv_ipc_rmid_deferred_release="no",
gnupg_cv_ipc_rmid_deferred_release="assume-no")
)
if test "$gnupg_cv_ipc_rmid_deferred_release" = "yes"; then
AC_DEFINE(IPC_RMID_DEFERRED_RELEASE,1,
[Defined if we can do a deferred shm release])
AC_MSG_RESULT(yes)
else
if test "$gnupg_cv_ipc_rmid_deferred_release" = "no"; then
AC_MSG_RESULT(no)
else
AC_MSG_RESULT([assuming no])
fi
fi
AC_MSG_CHECKING(whether SHM_LOCK is available)
AC_CACHE_VAL(gnupg_cv_ipc_have_shm_lock,
AC_TRY_COMPILE([#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/shm.h>],[
int shm_id;
shmctl(shm_id, SHM_LOCK, 0);
],
gnupg_cv_ipc_have_shm_lock="yes",
gnupg_cv_ipc_have_shm_lock="no"
)
)
if test "$gnupg_cv_ipc_have_shm_lock" = "yes"; then
AC_DEFINE(IPC_HAVE_SHM_LOCK,1,
[Defined if a SysV shared memory supports the LOCK flag])
AC_MSG_RESULT(yes)
else
AC_MSG_RESULT(no)
fi
fi
])
######################################################################
# Check whether mlock is broken (hpux 10.20 raises a SIGBUS if mlock
# is not called from uid 0 (not tested whether uid 0 works)
# For DECs Tru64 we have also to check whether mlock is in librt
# mlock is there a macro using memlk()
######################################################################
dnl GNUPG_CHECK_MLOCK
dnl
define(GNUPG_CHECK_MLOCK,
[ AC_CHECK_FUNCS(mlock)
if test "$ac_cv_func_mlock" = "no"; then
AC_CHECK_HEADERS(sys/mman.h)
if test "$ac_cv_header_sys_mman_h" = "yes"; then
# Add librt to LIBS:
AC_CHECK_LIB(rt, memlk)
AC_CACHE_CHECK([whether mlock is in sys/mman.h],
gnupg_cv_mlock_is_in_sys_mman,
[AC_TRY_LINK([
#include <assert.h>
#ifdef HAVE_SYS_MMAN_H
#include <sys/mman.h>
#endif
], [
- int i;
-
- /* glibc defines this for functions which it implements
- * to always fail with ENOSYS. Some functions are actually
- * named something starting with __ and the normal name
- * is an alias. */
- #if defined (__stub_mlock) || defined (__stub___mlock)
- choke me
- #else
- mlock(&i, 4);
- #endif
- ; return 0;
+ int i;
+
+ /* glibc defines this for functions which it implements
+ * to always fail with ENOSYS. Some functions are actually
+ * named something starting with __ and the normal name
+ * is an alias. */
+ #if defined (__stub_mlock) || defined (__stub___mlock)
+ choke me
+ #else
+ mlock(&i, 4);
+ #endif
+ ; return 0;
],
gnupg_cv_mlock_is_in_sys_mman=yes,
gnupg_cv_mlock_is_in_sys_mman=no)])
if test "$gnupg_cv_mlock_is_in_sys_mman" = "yes"; then
AC_DEFINE(HAVE_MLOCK,1,
[Defined if the system supports an mlock() call])
fi
fi
fi
if test "$ac_cv_func_mlock" = "yes"; then
+ AC_CHECK_FUNCS(sysconf getpagesize)
AC_MSG_CHECKING(whether mlock is broken)
AC_CACHE_VAL(gnupg_cv_have_broken_mlock,
AC_TRY_RUN([
- #include <stdlib.h>
- #include <unistd.h>
- #include <errno.h>
- #include <sys/mman.h>
- #include <sys/types.h>
- #include <fcntl.h>
-
- int main()
- {
- char *pool;
- int err;
- long int pgsize;
-
- #if defined(HAVE_SYSCONF) && defined(_SC_PAGESIZE)
- pgsize = sysconf(_SC_PAGESIZE);
- #elif defined(HAVE_GETPAGESIZE)
- pgsize = getpagesize();
- #endif
-
- if(pgsize==-1)
- pgsize = 4096;
-
- pool = malloc( 4096 + pgsize );
- if( !pool )
- return 2;
- pool += (pgsize - ((long int)pool % pgsize));
-
- err = mlock( pool, 4096 );
- if( !err || errno == EPERM )
- return 0; /* okay */
-
- return 1; /* hmmm */
- }
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <sys/mman.h>
+#include <sys/types.h>
+#include <fcntl.h>
+
+int main()
+{
+ char *pool;
+ int err;
+ long int pgsize;
+
+#if defined(HAVE_SYSCONF) && defined(_SC_PAGESIZE)
+ pgsize = sysconf(_SC_PAGESIZE);
+#elif defined(HAVE_GETPAGESIZE)
+ pgsize = getpagesize();
+#else
+ pgsize = -1;
+#endif
+
+ if(pgsize==-1)
+ pgsize = 4096;
+
+ pool = malloc( 4096 + pgsize );
+ if( !pool )
+ return 2;
+ pool += (pgsize - ((long int)pool % pgsize));
+
+ err = mlock( pool, 4096 );
+ if( !err || errno == EPERM )
+ return 0; /* okay */
+
+ return 1; /* hmmm */
+}
],
gnupg_cv_have_broken_mlock="no",
gnupg_cv_have_broken_mlock="yes",
gnupg_cv_have_broken_mlock="assume-no"
)
)
if test "$gnupg_cv_have_broken_mlock" = "yes"; then
AC_DEFINE(HAVE_BROKEN_MLOCK,1,
[Defined if the mlock() call does not work])
AC_MSG_RESULT(yes)
AC_CHECK_FUNCS(plock)
else
if test "$gnupg_cv_have_broken_mlock" = "no"; then
AC_MSG_RESULT(no)
else
AC_MSG_RESULT(assuming no)
fi
fi
fi
])
################################################################
# GNUPG_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN([GNUPG_PROG_NM],
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
else
ac_cv_path_NM="$ac_dir/nm"
fi
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
AC_SUBST(NM)
])
# GNUPG_SYS_NM_PARSE - Check for command ro grab the raw symbol name followed
# by C symbol name from nm.
AC_DEFUN([GNUPG_SYS_NM_PARSE],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([GNUPG_PROG_NM])dnl
# Check for command to grab the raw symbol name followed by C symbol from nm.
AC_MSG_CHECKING([command to parse $NM output])
AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
[# These are sane defaults that work on at least a few old systems.
# {They come from Ultrix. What could be older than Ultrix?!! ;)}
changequote(,)dnl
# Character class describing NM global symbol codes.
ac_symcode='[BCDEGRSTU]'
# Regexp to match symbols that can be accessed directly from C.
ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
# Transform the above into a raw symbol and a C symbol.
ac_symxfrm='\1 \1'
# Define system-specific variables.
case "$host_os" in
aix*)
ac_symcode='[BCDTU]'
;;
freebsd* | netbsd* | openbsd* | bsdi* | sunos* | cygwin32* | mingw32*)
ac_sympat='_\([_A-Za-z][_A-Za-z0-9]*\)'
ac_symxfrm='_\1 \1'
;;
irix*)
# Cannot use undefined symbols on IRIX because inlined functions mess us up.
ac_symcode='[BCDEGRST]'
;;
solaris*)
ac_symcode='[BDTU]'
;;
esac
# If we're using GNU nm, then use its standard symbol codes.
if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
ac_symcode='[ABCDGISTUW]'
fi
case "$host_os" in
cygwin32* | mingw32*)
# We do not want undefined symbols on cygwin32. The user must
# arrange to define them via -l arguments.
ac_symcode='[ABCDGISTW]'
;;
esac
changequote([,])dnl
# Write the raw and C identifiers.
ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* $ac_symcode $ac_sympat$/$ac_symxfrm/p'"
# Check to see that the pipe works correctly.
ac_pipe_works=no
cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func;return 0;}
EOF
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
ac_nlist=conftest.nm
if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
# Try sorting and uniquifying the output.
if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
mv -f "$ac_nlist"T "$ac_nlist"
ac_wcout=`wc "$ac_nlist" 2>/dev/null`
changequote(,)dnl
ac_count=`echo "X$ac_wcout" | sed -e 's,^X,,' -e 's/^[ ]*\([0-9][0-9]*\).*$/\1/'`
changequote([,])dnl
(test "$ac_count" -ge 0) 2>/dev/null || ac_count=-1
else
rm -f "$ac_nlist"T
ac_count=-1
fi
# Make sure that we snagged all the symbols we need.
if egrep ' _?nm_test_var$' "$ac_nlist" >/dev/null; then
if egrep ' _?nm_test_func$' "$ac_nlist" >/dev/null; then
cat <<EOF > conftest.c
#ifdef __cplusplus
extern "C" {
#endif
EOF
# Now generate the symbol file.
sed 's/^.* _\{0,1\}\(.*\)$/extern char \1;/' < "$ac_nlist" >> conftest.c
cat <<EOF >> conftest.c
#if defined (__STDC__) && __STDC__
# define __ptr_t void *
#else
# define __ptr_t char *
#endif
/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */
int dld_preloaded_symbol_count = $ac_count;
/* The mapping between symbol names and symbols. */
struct {
char *name;
__ptr_t address;
}
changequote(,)dnl
dld_preloaded_symbols[] =
changequote([,])dnl
{
EOF
sed 's/^_\{0,1\}\(.*\) _\{0,1\}\(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
cat <<\EOF >> conftest.c
{0, (__ptr_t) 0}
};
#ifdef __cplusplus
}
#endif
EOF
# Now try linking the two files.
mv conftest.$ac_objext conftestm.$ac_objext
ac_save_LIBS="$LIBS"
ac_save_CFLAGS="$CFLAGS"
LIBS="conftestm.$ac_objext"
CFLAGS="$CFLAGS$no_builtin_flag"
if AC_TRY_EVAL(ac_link) && test -s conftest; then
ac_pipe_works=yes
else
echo "configure: failed program was:" >&AC_FD_CC
cat conftest.c >&AC_FD_CC
fi
LIBS="$ac_save_LIBS"
CFLAGS="$ac_save_CFLAGS"
else
echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
fi
else
echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
fi
else
echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
fi
else
echo "$progname: failed program was:" >&AC_FD_CC
cat conftest.c >&AC_FD_CC
fi
rm -rf conftest*
# Do not use the global_symbol_pipe unless it works.
test "$ac_pipe_works" = yes || ac_cv_sys_global_symbol_pipe=
])
ac_result=yes
if test -z "$ac_cv_sys_global_symbol_pipe"; then
ac_result=no
fi
AC_MSG_RESULT($ac_result)
])
# GNUPG_SYS_LIBTOOL_CYGWIN32 - find tools needed on cygwin32
AC_DEFUN([GNUPG_SYS_LIBTOOL_CYGWIN32],
[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
])
# GNUPG_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
# with an underscore?
AC_DEFUN([GNUPG_SYS_SYMBOL_UNDERSCORE],
[tmp_do_check="no"
case "${host}" in
*-mingw32msvc*)
ac_cv_sys_symbol_underscore=yes
;;
i386-emx-os2 | i[3456]86-pc-os2*emx | i386-pc-msdosdjgpp)
ac_cv_sys_symbol_underscore=yes
;;
*)
if test "$cross_compiling" = yes; then
if test "x$ac_cv_sys_symbol_underscore" = x; then
ac_cv_sys_symbol_underscore=yes
fi
else
tmp_do_check="yes"
fi
;;
esac
if test "$tmp_do_check" = "yes"; then
AC_REQUIRE([GNUPG_PROG_NM])dnl
AC_REQUIRE([GNUPG_SYS_NM_PARSE])dnl
AC_MSG_CHECKING([for _ prefix in compiled symbols])
AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
[ac_cv_sys_symbol_underscore=no
cat > conftest.$ac_ext <<EOF
void nm_test_func(){}
int main(){nm_test_func;return 0;}
EOF
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
ac_nlist=conftest.nm
if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
# See whether the symbols have a leading underscore.
if egrep '^_nm_test_func' "$ac_nlist" >/dev/null; then
ac_cv_sys_symbol_underscore=yes
else
if egrep '^nm_test_func ' "$ac_nlist" >/dev/null; then
:
else
echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
fi
fi
else
echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
fi
else
echo "configure: failed program was:" >&AC_FD_CC
cat conftest.c >&AC_FD_CC
fi
rm -rf conftest*
])
else
AC_MSG_CHECKING([for _ prefix in compiled symbols])
fi
AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
if test x$ac_cv_sys_symbol_underscore = xyes; then
AC_DEFINE(WITH_SYMBOL_UNDERSCORE,1,
[Defined if compiled symbols have a leading underscore])
fi
])
dnl Stolen from gcc
dnl Define MKDIR_TAKES_ONE_ARG if mkdir accepts only one argument instead
dnl of the usual 2.
AC_DEFUN([GNUPG_FUNC_MKDIR_TAKES_ONE_ARG],
[AC_CHECK_HEADERS(sys/stat.h unistd.h direct.h)
AC_CACHE_CHECK([if mkdir takes one argument], gnupg_cv_mkdir_takes_one_arg,
[AC_TRY_COMPILE([
#include <sys/types.h>
#ifdef HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif
#ifdef HAVE_DIRECT_H
# include <direct.h>
#endif], [mkdir ("foo", 0);],
gnupg_cv_mkdir_takes_one_arg=no, gnupg_cv_mkdir_takes_one_arg=yes)])
if test $gnupg_cv_mkdir_takes_one_arg = yes ; then
AC_DEFINE(MKDIR_TAKES_ONE_ARG,1,
[Defined if mkdir() does not take permission flags])
fi
])
# GNUPG_AC_INIT([PACKAGE, VERSION, [ISDEVEL], BUG-REPORT)
# ----------------------------------------
# Call AC_INIT with an additional argument to indicate a development
# version. If this is called ""svn", the global revision of the
# repository will be appended, so that a version. The variable
# SVN_REVISION will always be set. In case svn is not available 0
# will be used for the revision.
m4_define([GNUPG_AC_INIT],
[
m4_define(gnupg_ac_init_tmp, m4_esyscmd([echo -n $((svn info 2>/dev/null || \
echo 'Revision: 0') |sed -n '/^Revision:/ {s/[^0-9]//gp;q}')]))
SVN_REVISION="gnupg_ac_init_tmp[]"
AC_INIT([$1], [$2][]m4_ifval([$3],[-[$3][]gnupg_ac_init_tmp],[]), [$4])
])
diff --git a/util/ChangeLog b/util/ChangeLog
index 70a95c758..a67547395 100644
--- a/util/ChangeLog
+++ b/util/ChangeLog
@@ -1,1748 +1,1753 @@
+2007-04-16 Werner Koch <wk@g10code.com>
+
+ * secmem.c (init_pool): Avoid assigning a negative value to a
+ size_t.
+
2007-04-16 David Shaw <dshaw@jabberwocky.com>
* secmem.c (init_pool): Use sysconf() if available to determine
page size.
2007-04-15 David Shaw <dshaw@jabberwocky.com>
* argparse.c (default_strusage): Copyright 2007.
* cert.c, srv.c, pka.c: Need arpa/inet.h for ntohs().
2007-02-26 Werner Koch <wk@g10code.com>
* simple-gettext.c (set_gettext_file): Make use of the envvar
LANGUAGE to allow overriding of the registry setting.
2007-02-12 Werner Koch <wk@g10code.com>
* secmem.c (ptr_into_pool_p): New.
(m_is_secure): Implement in terms of above. Also check that the
pool has been initialized.
2007-02-10 David Shaw <dshaw@jabberwocky.com>
* http.c (do_parse_uri): Remove the hkp port 11371 detection. We
implement hkp in the keyserver handler, and the support here makes
it appear like a bad hkp request actually succeeded.
2007-01-31 David Shaw <dshaw@jabberwocky.com>
* ttyio.c (do_get): Assume that anything read from the user
without echoing to the screen is sensitive and put it in secure
memory. Suggested by Benjamin Bennett.
2006-12-14 Werner Koch <wk@g10code.com>
* http.c (http_wait_response): No more shutdown. Fixes bug#739.
2006-10-02 David Shaw <dshaw@jabberwocky.com>
* strsep.c (strsep): It's strsep, not strsep2 from testing. (If I
had a dollar for every time I've done that...)
2006-09-28 David Shaw <dshaw@jabberwocky.com>
* strgutil.c (strsep): Move to strsep.c for AC_REPLACE_FUNCS.
* Makefile.am: Build libcompat.a for keyserver helpers. libutil.a
always contains everything in libcompat.a, so we only need to link
to one or the other.
* miscutil.c: Move hextobyte to new file compat.c.
2006-07-31 Werner Koch <wk@g10code.com>
* iobuf.c (iobuf_ioctl, fd_cache_invalidate): Allow closing all
open files.
2006-07-29 Marcus Brinkmann <marcus@g10code.de>
* secmem.c (init_pool): Close FD after establishing the mapping.
2006-07-20 David Shaw <dshaw@jabberwocky.com>
* http.c (send_request): A zero-length proxy is the same as no
proxy at all. Suggested by J. Scott Berg.
2006-04-17 David Shaw <dshaw@jabberwocky.com>
* miscutil.c (make_printable_string): Fix bug where some control
characters lose part of their ASCII representation.
2006-04-11 David Shaw <dshaw@jabberwocky.com>
* memory.c (realloc): Revert m_guard fix and stick an #error in
there to inform people not to use it.
2006-04-11 Werner Koch <wk@g10code.com>
* iobuf.c (IOBUF_BUFFER_SIZE): New to replace hardwired 8192.
2006-04-06 David Shaw <dshaw@jabberwocky.com>
* memory.c (realloc): Fix compile problem with --enable-m-guard.
2006-03-30 David Shaw <dshaw@jabberwocky.com>
* cert.c (main): Fix test program build warning on OSX.
2006-03-16 David Shaw <dshaw@jabberwocky.com>
* cert.c (get_cert): Handle the fixed IPGP type with fingerprint.
2006-03-08 David Shaw <dshaw@jabberwocky.com>
* argparse.c (default_strusage): Update copyright year to 2006.
2006-02-19 David Shaw <dshaw@jabberwocky.com>
* http.c (send_request): A zero length proxy is the same as no
proxy.
2006-02-14 Werner Koch <wk@gnupg.org>
* errors.c (g10_errstr): Add NO_DATA.
2006-01-26 David Shaw <dshaw@jabberwocky.com>
* cert.c (get_cert): Disable IPGP types for now until the format
questions in the draft are settled.
* srv.c (getsrv): Error on oversize SRV responses.
2005-12-24 David Shaw <dshaw@jabberwocky.com>
* cert.c (get_cert): Properly chase down CNAMEs pointing to CERTs.
2005-12-23 David Shaw <dshaw@jabberwocky.com>
* cert.c, Makefile.am: New code to do DNS CERT queries.
2005-12-22 David Shaw <dshaw@jabberwocky.com>
* srv.c, Makefile.am: Only build srv.c if we need to.
2005-12-10 Ryan Lortie <desrt@desrt.ca> (dshaw)
* ttyio.c (tty_enable_completion, tty_disable_completion): Add
checks for no_terminal so we don't try to open("/dev/tty") when
invoked with --no-tty.
2005-12-06 David Shaw <dshaw@jabberwocky.com>
* Makefile.am: Some cleanup so we don't build files that are
completely ifdeffed out. This causes a warning on Sun's cc. Do
the internal regex code as well for consistency.
* mkdtemp.c (mkdtemp): Fix warning.
* secmem.c, assuan-buffer.c, dotlock.c: Fix a few warnings from
printf-ing %p where the arg wasn't void *.
2005-11-02 David Shaw <dshaw@jabberwocky.com>
* util.c [!HAVE_DECL_GETPAGESIZE]: Prototype getpagesize() if
unistd.h doesn't have it (for MinGW).
2005-09-22 Werner Koch <wk@g10code.com>
* iobuf.c (iobuf_get_filelength): New arg OVERFLOW.
(iobuf_get_filelength) [W32]: Use GetFileSizeEx if available.
* fileutil.c (is_file_compressed): Take care of the OVERFLOW
2005-08-31 David Shaw <dshaw@jabberwocky.com>
* fileutil.c (untilde): New. Expand ~/foo and ~username/foo
filenames into full paths using $HOME if possible, or
getpwuid/getpwnam if necessary.
(make_filename): Use it here.
2005-07-28 Werner Koch <wk@g10code.com>
* pka.c: New.
(parse_txt_record): Changed from v=1 to v=pka1.
* Makefile.am (pka-test): new.
2005-07-27 Werner Koch <wk@g10code.com>
* memory.c (FNAMEX, FNAMEXM): New macros to cope with the now used
names xmalloc style names.
2005-07-18 Werner Koch <wk@g10code.com>
* ttyio.c (do_get): Move printing of the prompt after disabling
echo. Suggested by Scott Worley.
2005-06-23 David Shaw <dshaw@jabberwocky.com>
* http.c (make_radix64_string): Add '=' padding as per standard.
(send_request, http_open, http_open_document): Clean up auth code.
Can now support different auth for a proxy and the file being
requested via that proxy. Unescape auth strings.
2005-06-22 David Shaw <dshaw@jabberwocky.com>
* memrchr.c (memrchr): Not all compilers allow initializing based
on a variable that is also being initialized. Noted by Nelson
H. F. Beebe.
2005-06-21 David Shaw <dshaw@jabberwocky.com>
* http.c (send_request, http_open, http_open_document): Pass in
auth and proxyauth that can override the in-url auth.
* http.c (send_request): Need == after the radix64-encoded basic
auth string.
2005-06-08 David Shaw <dshaw@jabberwocky.com>
* dotlock.c [HAVE_DOSISH_SYSTEM]: Fix unused function warnings on
mingw32. Noted by Joe Vender.
2005-05-31 Werner Koch <wk@g10code.com>
* regcomp.c (MB_CUR_MAX) [_WIN32]: Define it only if not defined.
2005-05-29 David Shaw <dshaw@jabberwocky.com>
* strgutil.c (set_native_charset) [_WIN32]: Add alias for codepage
CP65001 to utf-8.
2005-05-19 Werner Koch <wk@g10code.com>
* membuf.c: New. Taken from gnupg 1.9.
2005-05-05 David Shaw <dshaw@jabberwocky.com>
* miscutil.c (add_days_to_timestamp): Remove as unused.
2005-04-12 David Shaw <dshaw@jabberwocky.com>
* assuan-client.c: Fix warning on OSX.
* memrchr.c: New replacement function.
* assuan-buffer.c: Use it here.
2005-04-04 Werner Koch <wk@g10code.com>
* memory.c (xcalloc, xcalloc_secure): New wrappers.
* assuan-client.c (assuan_transact): Factored all code out to ..
(assuan_transact2): .. new. Add arg OKAY_CB. Wipe the memory
processed though that callback.
2005-03-31 Werner Koch <wk@g10code.com>
* isascii.c: New. This is an autoconf replacement function.
* Makefile.am (assuan_source): New. Only used when agent support
has been requested.
* assuan-buffer.c, assuan-client.c, assuan-defs.h,
* assuan-errors.c, assuan-logging.c, assuan-socket-connect.c,
* assuan-socket.c, assuan-util.c, assuan-connect.c: New. Taken
from libassuan 0.6.9 and adjusted for our limited use of Assuan.
2005-03-18 David Shaw <dshaw@jabberwocky.com>
* ttyio.c (tty_enable_completion, tty_disable_completion): Enable
and disable readline completion.
(init_ttyfp): Completion is disabled by default.
2005-03-14 Werner Koch <wk@g10code.com>
* miscutil.c (isotimestamp): New.
2005-03-10 Werner Koch <wk@g10code.com>
* secmem.c (secmem_realloc): Take control information into account
when checking whether a resize is needed.
2005-03-08 Werner Koch <wk@g10code.com>
* miscutil.c (asctimestamp) [W32]: Don't use %Z.
2005-02-03 Werner Koch <wk@g10code.com>
* w32reg.c (read_w32_registry_string): Fallback to HKLM also for a
missing name.
* http.c (connect_server): Define ERR outside of the !W32 block.
2005-02-01 David Shaw <dshaw@jabberwocky.com>
* http.c (connect_server): Fix fd leak when connecting to a
round-robin server set that has some down servers. Noted by Phil
Pennock.
2005-01-20 Werner Koch <wk@g10code.com>
* simple-gettext.c (set_gettext_file): Use MO files depending on
the installation directory. Add new arg REGKEY.
2005-01-18 Werner Koch <wk@g10code.com>
* argparse.c (default_strusage): Changed default copyright year to
2005.
* strgutil.c (handle_iconv_error): Print error messages only once.
(native_to_utf8, utf8_to_native): Ditto.
2005-01-11 Werner Koch <wk@g10code.com>
* strgutil.c (set_native_charset) [W32]: Use the alias table from
libiconv 1.9.2.
2005-01-13 David Shaw <dshaw@jabberwocky.com>
* http.c (connect_server): Use INADDR_NONE instead of
SOCKET_ERROR. Noted by Timo.
2005-01-06 Werner Koch <wk@g10code.com>
* strgutil.c (set_native_charset): Assume that ASCII,
ANSI_X3.4-1968 and 646 are actually meant as Latin-1. If
nl_langinfo is not available get the charset from environment
variables. For W32 use GetACP as error fallback. Removed Latin-15
to Latin-1 aliasing.
2004-12-28 David Shaw <dshaw@jabberwocky.com>
* srv.h: Better implementation for the SRV check. We don't need
to actually check all the header files individually since the SRV
test compile uses them together.
2004-12-20 Werner Koch <wk@g10code.com>
* strgutil.c (handle_iconv_error): Turn diagnostics into warnings
so that gpg does not return with failure.
(native_to_utf8, utf8_to_native): Ditto.
2004-12-16 Werner Koch <wk@g10code.com>
* iobuf.c (fd_cache_strcmp) [W32]: Casting is a Bad Thing. Cast to
an unsigned char pointer and to an unsigned integer.
2004-12-18 David Shaw <dshaw@jabberwocky.com>
* ttyio.c: Use only HAVE_LIBREADLINE to detect readline
availability.
2004-12-16 David Shaw <dshaw@jabberwocky.com>
* srv.h: Don't include arpa/nameser.h unless we have it. Include
"types.h" for u16.
* secmem.c (secmem_init): Return a flag to indicate whether we got
the lock.
2004-12-06 Werner Koch <wk@g10code.com>
* iobuf.c (fd_cache_strcmp): New. Use whenever we compare
filenames for the fd_cache. This is needed because the backslash
is an alias for a slash under W32. Reported by Tobias Winkler.
2004-12-03 David Shaw <dshaw@jabberwocky.com>
* http.c (send_request): Include the port if non-80 in the Host:
header. Noted by Jason Harris.
2004-11-03 Timo Schulz <twoaday@g10code.com>
* strgutil.c (w32_strerror): New.
* ttyio.c (init_ttyfp, tty_printf, do_get): Use it here.
* iobuf.c (fd_cache_open, file_filter): Likewise.
(iobuf_seek, translate_file_handle): Likewise.
2004-11-02 Werner Koch <wk@g10code.com>
* strgutil.c (load_libiconv): Use log_info to avoid failures when
iconv.dll is not installed.
2004-10-31 Werner Koch <wk@g10code.com>
* simple-gettext.c (get_string): Removed debugging hack.
2004-10-27 Werner Koch <wk@g10code.com>
* simple-gettext.c: Removed windows.h.
(get_string): On the fly translation from utf-8 to active
character set.
* strgutil.c (load_libiconv) [_WIN32]: new.
(set_native_charset) [_WIN32]: Call it here and autodetect the
used code page.
(native_to_utf8, utf8_to_native): Reverted arguments for
iconv_open.
(handle_iconv_error): Made this function match iconv_open argumnet
ordering.
(utf8_to_native): Disable all quoting for DELIM == -1.
2004-10-26 Werner Koch <wk@g10code.com>
* strgutil.c (mem2str): Translated comment to English.
(handle_iconv_error) [USE_GNUPG_ICONV]: New.
(set_native_charset) [USE_GNUPG_ICONV]: Added iconv based
conversion checks.
(native_to_utf8, utf8_to_native): Added iconv based conversion.
2004-10-21 Werner Koch <wk@g10code.com>
* vasprintf.c: Removed. It was used only at one place and I don't
want to get into build problems in 1.4.
2004-10-18 David Shaw <dshaw@jabberwocky.com>
* http.c (connect_server, send_request): Use the URI scheme as the
SRV tag rather than hard-coding _hkp.
2004-10-16 David Shaw <dshaw@jabberwocky.com>
* http.c (connect_server): [_WIN32] actually fill in the sin_addr
so we aren't always talking to localhost. Add some general sanity
checking of parameters learned from gethostbyname().
2004-10-15 Werner Koch <wk@g10code.com>
* vasprintf.c: New. Taken from gnupg 1.9.
2004-10-14 Werner Koch <wk@g10code.com>
* iobuf.c (iobuf_get_fd): Removed double check on directfp and
cats it to FILEP becuase directfp is actually a void *. Notes by
Stefan.
2004-10-13 Werner Koch <wk@g10code.com>
* logger.c (g10_log_error_f, g10_log_fatal_f, g10_log_info_f)
(g10_log_debug_f, print_prefix_f): Removed.
* iobuf.c (iobuf_is_pipe_filename): New.
(iobuf_get_fd): New.
* fileutil.c (is_file_compressed): Use it here.
2004-09-30 David Shaw <dshaw@jabberwocky.com>
* iobuf.c (pop_filter): Make static.
* dotlock.c (destroy_dotlock): New. Remove the handle from the
list of locks.
(release_dotlock): Don't act if we don't have any locks at all.
From Werner on stable branch.
2004-09-10 David Shaw <dshaw@jabberwocky.com>
* http.c (make_radix64_string, do_parse_uri, send_request): Add
basic auth for proxies and direct requests. Suggested by Florent
Thoumie.
* http.c (main): Fix test code for http-test.
2004-09-09 Werner Koch <wk@g10code.com>
* errors.c (g10_errstr): New error codes G10ERR_NO_CARD,
G10ERR_CANCELED.
* ttyio.c (tty_get): Add readline support.
* iobuf.c (iobuf_skip_rest): New. Orginal patch by Florian
Weimer. Added new argument PARTIAL.
2004-08-19 David Shaw <dshaw@jabberwocky.com>
* http.c (insert_escapes): Fix encoding problem for non-URI-safe
characters. Noted by Vladimir Novak.
2004-05-21 David Shaw <dshaw@jabberwocky.com>
* timegm.c: New replacement function. Removes the need for
setenv.c and unsetenv.c.
* setenv.c: Removed.
* unsetenv.c: Removed.
2004-03-04 David Shaw <dshaw@jabberwocky.com>
* iobuf.c (block_filter): Remove the old gpg indeterminate length
mode.
(iobuf_set_block_mode, iobuf_in_block_mode): Removed as
superfluous.
2004-03-01 David Shaw <dshaw@jabberwocky.com>
* iobuf.c (block_filter): Properly handle a partial body stream
that ends with a 5-byte length that happens to be zero.
2004-02-28 David Shaw <dshaw@jabberwocky.com>
* unsetenv.c: Fixed debugging typo.
2004-02-24 Werner Koch <wk@gnupg.org>
* secmem.c (lock_pool) [_AIX]: Also set errno.
2004-02-21 David Shaw <dshaw@jabberwocky.com>
* miscutil.c (hextobyte): Moved here from g10/misc.c so I can use
it in the keyserver helpers.
2004-02-20 David Shaw <dshaw@jabberwocky.com>
* mkdtemp.c: New (moved from g10/), setenv.c: New, unsetenv.c:
New.
* Makefile.am: Include @LIBOBJS@ for replacement functions.
2004-01-15 David Shaw <dshaw@jabberwocky.com>
* argparse.c (default_strusage): Update copyright date.
(initialize): Avoid a number of -Wformat-nonliteral warnings.
These aren't actual problems, but the warnings bothered me.
* miscutil.c (print_string2): New variation on print_string that
allows two delimiters.
(print_string): Call print_string2 to do work.
2003-12-29 David Shaw <dshaw@jabberwocky.com>
* g10u.c: Dead code. Remove.
* Makefile.am: Don't compile g10u.c.
* iobuf.c (block_filter): Properly handle a partial body stream
that ends with a 5-byte length.
2003-12-28 David Shaw <dshaw@jabberwocky.com>
* http.c (send_request, http_open_document, http_open): Pass the
http proxy from outside rather than pulling it from the
evironment.
2003-12-28 Stefan Bellon <sbellon@sbellon.de>
* riscos.c [__riscos__]: Better filetype handling (use a
different SWI) and removal of unnecessary function.
* memory.c (out_of_core) [__riscos__]: Produce stack backtrace on
RISC OS if out_of_core() is called and M_GUARD is compiled in.
2003-12-06 David Shaw <dshaw@jabberwocky.com>
* http.c (send_request): Add a Host: header for virtual hosts.
2003-12-04 David Shaw <dshaw@jabberwocky.com>
* miscutil.c (answer_is_yes_no_default, answer_is_yes_no_quit):
Don't use alternate strings when not needed so we don't have to
re-translate them. Hopefully the comment will be enough to
indicate multiple match strings.
2003-11-20 David Shaw <dshaw@jabberwocky.com>
* miscutil.c (match_multistr): New. Match against each segment in
a string with tokens separated by |.
(answer_is_yes_no_default, answer_is_yes_no_quit,
answer_is_okay_cancel): Use it here to enable alternate
translations.
2003-11-01 David Shaw <dshaw@jabberwocky.com>
* http.c (connect_server): Differentiate between generic "can't
connect" errors and the more specific "host not found". Suggested
by Samuel Tardieu.
2003-10-29 Werner Koch <wk@gnupg.org>
* miscutil.c (answer_is_okay_cancel): New.
2003-10-25 Werner Koch <wk@gnupg.org>
* Makefile.am: Replaced INTLLIBS by LIBINTL.
2003-10-23 Werner Koch <wk@gnupg.org>
* secmem.c (lock_pool) [_AIX]: Don't use plock.
2003-10-12 David Shaw <dshaw@jabberwocky.com>
* srv.c: OSX 10.2.8/Darwin 6.8 seems to have some #include
ordering issues? Move sys/types.h up higher to work around.
2003-10-08 Werner Koch <wk@gnupg.org>
* ttyio.c (tty_print_string, tty_print_utf8_string2)
(tty_print_utf8_string): Made string arg const.
2003-09-28 Timo Schulz <twoaday@freakmail.de>
* strgutil.c [WIN32] (asprintf): New.
2003-09-28 Werner Koch <wk@gnupg.org>
* ttyio.c (tty_fprintf): New.
2003-09-21 Timo Schulz <twoaday@freakmail.de>
* http.c [WIN32]: Define MB_CUR_MAX.
(connect_server): use unsigned long since W32 does not have in_addr_t.
2003-08-28 David Shaw <dshaw@jabberwocky.com>
* dotlock.c, http.c, iobuf.c, simple-gettext.c, srv.c, srv.h,
strgutil.c, ttyio.c, w32reg.c: s/__MINGW32__/_WIN32/ to help
building on native Windows compilers. Requested by Brian Gladman.
From Werner on stable branch.
* http.c (connect_server): Oops - forgot to freeaddrinfo().
2003-08-24 David Shaw <dshaw@jabberwocky.com>
* http.c (connect_server): Try and use getaddrinfo if it is
available. Try for IPv6 via getaddrinfo() or a IPv6-ized
gethostbyname(). Suggested by Jun-ichiro itojun Hagino.
2003-07-10 David Shaw <dshaw@jabberwocky.com> (from Werner on stable branch)
* iobuf.c (check_special_filename): Replaced is isdigit by digitp
to avoid passing negative values and potential locale problems.
Problem noted by Christian Biere.
* strgutil.c (strlwr,strcasecmp,strncasecmp): Make sure we don't
pass a negative value.
* miscutil.c (scan_isodatestr): Ditto.
2003-05-30 David Shaw <dshaw@jabberwocky.com>
* srv.h, srv.c: Include windows.h with MINGW32.
2003-05-24 David Shaw <dshaw@jabberwocky.com>
* argparse.c, dotlock.c, fileutil.c, iobuf.c, miscutil.c,
simple-gettext.c, errors.c, http.c, memory.c, secmem.c, ttyio.c:
Edit all preprocessor instructions to remove whitespace before the
'#'. This is not required by C89, but there are some compilers
out there that don't like it.
2003-05-21 Werner Koch <wk@gnupg.org>
* fileutil.c (is_file_compressed): Fixed checking for "-" filename.
2003-04-13 David Shaw <dshaw@jabberwocky.com>
* srv.c (main): Test against wwwkeys.pgp.net.
* srv.h: Grr. The RH7.3 Linux man page defines the fourth arg of
dn_expand as unsigned char*, but it is really char* according to
resolv.h.
2003-03-23 David Shaw <dshaw@jabberwocky.com>
* argparse.c (default_strusage): Change copyright date.
2003-03-14 David Shaw <dshaw@jabberwocky.com>
* srv.h, srv.c (getsrv): Use unsigned char rather than char.
Noted by Stefan Bellon.
2003-03-11 David Shaw <dshaw@jabberwocky.com>
* http.c (connect_server): Use DNS SRV to get a server list. Fail
over to A records if necessary.
* Makefile.am, srv.h, srv.c: New DNS SRV handling code.
2003-02-22 David Shaw <dshaw@jabberwocky.com>
* ttyio.c (tty_print_utf8_string, tty_print_utf8_string2): Use 0
to indicate a string with no maximum size. This prevents early
truncation of strings that contain control chars which are
expanded into \xXX form.
2002-12-26 David Shaw <dshaw@jabberwocky.com>
* iobuf.c (iobuf_flush): Only print debug info if debugging is on.
2002-11-13 David Shaw <dshaw@jabberwocky.com>
* secmem.c (lock_pool) [__CYGWIN__]: Don't print secmem warning.
From Werner on stable branch.
2002-11-09 Werner Koch <wk@gnupg.org>
* ttyio.c (TERMDEVICE): Removed.
(tty_get_ttyname): New.
(init_ttyfp): Use it here instead of the TERMDEVICE macro.
2002-11-06 David Shaw <dshaw@jabberwocky.com>
* w32reg.c (read_w32_registry_string): Fixed expanding of the
environment buffer; didn't worked at all. Reported by Thijmen
Klok. From Werner on stable branch.
* secmem.c (secmem_free, secmem_term): Use wipememory2() instead
of memset() to overwrite secure memory
* iobuf.c (direct_open): Handle mode 'b' if O_BINARY is available.
From Werner on stable branch.
* fileutil.c: Comment from stable branch.
2002-10-31 Stefan Bellon <sbellon@sbellon.de>
* riscos.c (riscos_load_module, riscos_check_regexp): New.
(riscos_set_filetype_by_mimetype, riscos_dump_fdlist)
(riscos_fdopenfile, riscos_close_fds, riscos_renamefile)
(riscos_gstrans, riscos_list_openfiles, riscos_not_implemented):
Renamed functions to contain riscos prefix.
* dotlock.c [__riscos__]: Renames due to changes in riscos.c.
* fileutil.c [__riscos__]: Likewise.
2002-10-29 Stefan Bellon <sbellon@sbellon.de>
* fileutil.c: Removed unnecessary left-over includes for RISC OS.
(make_filename): Tidied up RISC OS stuff.
(compare_filenames) [__riscos__]: Compare with ascii_strcasecmp().
(make_basename) [__riscos__]: Branch to own RISC OS routine from
here.
* riscos.c (riscos_make_basename): New.
2002-10-28 Stefan Bellon <sbellon@sbellon.de>
* fileutil.c (make_basename) [__riscos__]: Cut off RISC OS' filing
systems from filepath.
* riscos.c (riscos_get_filetype_from_string, riscos_get_filetype):
Added.
(riscos_set_filetype_by_number): Made public.
2002-10-19 David Shaw <dshaw@jabberwocky.com>
* Makefile.am, regcomp.c, regex.c, regex_internal.c,
regex_internal.h, regexec.c: Add new regex files from glibc 2.3.1.
2002-10-17 David Shaw <dshaw@jabberwocky.com>
* http.c (connect_server): Try all A records for names with
multiple addresses until one answers for both MINGW32 and not
MINGW32.
2002-10-10 David Shaw <dshaw@jabberwocky.com>
* http.c (connect_server): Properly handle a single A record that
fails connect().
2002-10-03 David Shaw <dshaw@jabberwocky.com>
* logger.c (g10_log_warning, log_set_strict): Add new log_warning
logger command which can be switched between log_info and
log_error via log_set_strict.
2002-09-24 David Shaw <dshaw@jabberwocky.com>
* http.c (connect_server): Try all A records for names with
multiple addresses until one answers (not MINGW32).
2002-09-16 Werner Koch <wk@gnupg.org>
* w32reg.c (read_w32_registry_string): Fallback to HLM.
2002-09-12 Stefan Bellon <sbellon@sbellon.de>
* fileutil.c (make_filename): Removed variable for RISC OS to
avoid compiler warning.
* secmem.c: Removed static variable for RISC OS to avoid
compiler warning.
2002-09-11 Werner Koch <wk@gnupg.org>
* simple-gettext.c: Disable charset mappings. We do it now when
installing the files.
2002-09-09 Werner Koch <wk@gnupg.org>
* w32reg.c (read_w32_registry_string): Handle REG_EXPAND_SZ.
Suggested by Ryan Malayter.
* strgutil.c (ascii_strcasecmp): Replaced by code from gnulib.
(ascii_strncasecmp): New.
2002-09-02 Werner Koch <wk@gnupg.org>
* simple-gettext.c (set_gettext_file): Make sure that we only use
backslashes.
* strgutil.c (set_native_charset): Allow NULL as argument to use
nl_langinfo for selection. Mapped latin-15 to latin-1.
2002-08-30 Werner Koch <wk@gnupg.org>
* iobuf.c (block_filter): Removed the assert, so that one can pass
the first character of a message and use the block filter for
non partial length encoded packets.
2002-08-06 Stefan Bellon <sbellon@sbellon.de>
* ttyio.c [__riscos__]: Moved low-level RISC OS stuff to riscos.c.
* riscos.c: Use new SWI calling mechanism of UnixLib.
2002-08-03 Stefan Bellon <sbellon@sbellon.de>
* secmem.c (init_pool, secmem_term): Changed #if to #ifdef in
order to avoid warning with RISC OS' Norcroft C.
2002-07-25 David Shaw <dshaw@jabberwocky.com>
* secmem.c: "Warning" -> "WARNING"
2002-07-05 Werner Koch <wk@gnupg.org>
* argparse.c (initialize): We better exit after a read error so
that we don't run into an endless loop when reading a directory.
Noted by Andrew Suffield.
2002-07-01 David Shaw <dshaw@jabberwocky.com>
* argparse.c (optfile_parse): Fix variable typo - 'p2' should be
'p' :)
2002-06-29 Werner Koch <wk@gnupg.org>
* argparse.c (optfile_parse): Renamed an auto I to P2 to avoid
shadowing warning.
2002-06-21 Stefan Bellon <sbellon@sbellon.de>
* riscos.c (riscos_global_defaults): New.
2002-06-20 Stefan Bellon <sbellon@sbellon.de>
* riscos.c (riscos_set_filetype_by_number, riscos_set_filetype):
New. Set RISC OS filetype according to MIME type.
2002-06-14 David Shaw <dshaw@jabberwocky.com>
* strgutil.c (pop_strlist): New function to pop the head off of a
strlist.
2002-06-05 Timo Schulz <ts@winpt.org>
* fileutil.c (is_file_compressed): Corrected the magic values
for bzip2 and gzip. Noted by David.
2002-05-22 Werner Koch <wk@gnupg.org>
* fileutil.c (compare_filenames): Replaced stricmp by strcasecmp.
* miscutil.c (answer_is_yes_no_quit,answer_is_yes_no_default): Ditto.
* strgutil.c (strncasecmp): New.
(memicmp): Removed.
2002-05-10 Stefan Bellon <sbellon@sbellon.de>
* memory.c (add_entry) [M_DEBUG]: Added some missing EXTRA_ALIGN.
(free_entry) [M_DEBUG]: Free secure memory via secmem_free.
(alloc_secure): Malloc at least 1 byte.
(realloc) [M_GUARD]: Added missing FNAMEARG to function call.
* logger.c (g10_log_bug0) [__riscos__]: Make use of first
g10_log_bug0 function for later Norcroft compiler.
* riscos.c: Added stdlib.h include.
2002-05-04 Werner Koch <wk@gnupg.org>
* http.c (write_server) [__MINGW32__]: Replaced WriteFile by send
because sockets don't work with WriteFile under NT anymore.
2002-05-03 David Shaw <dshaw@jabberwocky.com>
* argparse.c (optfile_parse): Remove quotes only if they totally
enclose the string, and do not occur within the string. This
makes specifying a program under Win32 easier when you need quotes
around part of a string, but not around the whole string.
2002-05-02 Werner Koch <wk@gnupg.org>
* memory.c (alloc): Malloc at least 1 byte. Noted by Winona Brown.
2002-04-23 David Shaw <dshaw@jabberwocky.com>
* miscutil.c: New function answer_is_yes_no_default() to give a
default answer.
2002-04-22 Stefan Bellon <sbellon@sbellon.de>
* riscos.c (riscos_open, riscos_fopen, riscos_fstat, set_filetype):
Removed as they're not needed anymore.
* iobuf.c (direct_open) [__riscos__]: Don't allow opening of
directories.
2002-04-08 Werner Koch <wk@gnupg.org>
Fixed filename of last entry.
2002-03-29 David Shaw <dshaw@jabberwocky.com>
* miscutil.c (print_string, utf8_to_native): If a delimiter is
used, then quote the backslash character as well. Problem noted
by Rainer Perske.
2002-03-15 Werner Koch <wk@gnupg.org>
* argparse.c (optfile_parse): Fixed missing argument handling.
2002-02-28 Timo Schulz <ts@winpt.org>
* http.c (write_server): Convert integer to a HANDLE for W32.
2002-01-27 David Shaw <dshaw@jabberwocky.com>
* iobuf.c (iobuf_fdopen, iobuf_sockopen): Do not cache fdopened
fds on close.
2002-01-08 Werner Koch <wk@gnupg.org>
* secmem.c (print_warn): Print a pointer to the FAQ.
2002-01-05 Werner Koch <wk@gnupg.org>
* argparse.c (default_strusage): Set default copyright date to 2002.
2002-01-02 Stefan Bellon <sbellon@sbellon.de>
* iobuf.c [__riscos__]: Updated include file name.
* fileutil.c [__riscos__]: Ditto.
* ttyio.d [__riscos__]: Ditto.
* riscos.c [__riscos__]: Ditto. Added debugging code and
unified error messages.
2001-12-27 David Shaw <dshaw@jabberwocky.com>
* errors.c (g10_errstr): Added G10ERR_KEYSERVER
2001-12-27 Werner Koch <wk@gnupg.org>
* simple-gettext.c [MINGW32]: Fixed last changed.
2001-12-22 Stefan Bellon <sbellon@sbellon.de>
* memory.c (realloc): Fixed realloc not working when M_GUARD is
defined and first parameter is NULL.
2001-12-22 Timo Schulz <ts@winpt.org>
* fileutil.c (is_file_compressed): New.
2001-12-19 Werner Koch <wk@gnupg.org>
* simple-gettext.c, w32reg.c [CYGWIN32]: Allow to use this file
2001-10-11 Werner Koch <wk@gnupg.org>
* http.c (do_parse_uri): Changed initialization of the port number
so that it does also work with x-hkp. By David Shaw.
2001-09-19 Werner Koch <wk@gnupg.org>
* w32reg.c (get_root_key): New.
(read_w32_registry_string): Use it here.
(write_w32_registry_string): New. Contributed by Timo.
* iobuf.c (iobuf_ioctl): New command to disable fd
caching. Implemented no_cache flag where needed.
(iobuf_sockopen): Always set no_cache flag.
* strgutil.c (utf8_to_native): Add a delim arg and changed all
callers. Make sure that quoting is done when translation is
disabled.
* miscutil.c (print_utf8_string2): New.
2001-09-17 Werner Koch <wk@gnupg.org>
* miscutil.c (print_string): Use explicit ranges and not iscntrl().
(make_printable_string): Ditto.
2001-09-07 Werner Koch <wk@gnupg.org>
* strgutil.c (strsep): New, taken from glibc 2.2.1.
2001-09-03 Werner Koch <wk@gnupg.org>
* miscutil.c (strtimestamp,asctimestamp): Avoid trigraphs.
2001-08-21 Stefan Bellon <sbellon@sbellon.de>
* riscos.c [__riscos__] (close_fds): Fixed possible endless loop.
2001-08-20 Werner Koch <wk@gnupg.org>
Applied patches from Stefan Bellon <sbellon@sbellon.de> to support
RISC OS. Nearly all of these patches are identified by the
__riscos__ macro.
* secmem.c [__riscos__]: Disabled secure memory stuff.
* dotlock.c, ttyio.c [__riscos__]: Adapted for RISC OS
* fileutil.c, iobuf.c: Adapted for RISC OS; mainly replaced
hardcoded path separators with EXTSEP_S like macros.
* http.c (send_request): Use macros for the env-var name.
* logger.c [__riscos__]: Do an fflush at the end of each log
function.
* memory.c [__riscos__]: Minor patches
* riscos.c (set_filetype): New.
* secmem.c (lock_pool): Under HPUX mlock is broken but we might
have plock, so we use this to lock the entire process. By Albert
Chin.
2001-07-03 Werner Koch <wk@gnupg.org>
* strgutil.c (utf8_to_native): Fixed printing of invalid utf-8
characters. Thomas Roessler reported that the escaping didn't work
correct.
2001-06-12 Werner Koch <wk@gnupg.org>
* strgutil.c (ascii_memistr,ascii_isupper,ascii_islower,
ascii_toupper,ascii_tolower, ascii_strcasecmp, ascii_memcasecmp): New.
(set_native_charset): Use ascii_strcasecmp()
* fileutil.c (compare_filenames): Ditto
* miscutil.c (answer_is_yes): Ditto.
(answer_is_yes_no_quit): Ditto.
2001-06-06 Werner Koch <wk@gnupg.org>
* strgutil.c (vasprintf) [__MINGW32__]: New. Taken from libiberty.
* ttyio.c (tty_printf) [__MINGW32__]: Replaced the sprintf with
the new vasprintf.
2001-06-05 Werner Koch <wk@gnupg.org>
* dotlock.c (make_dotlock): Typo fixes.
2001-05-25 Werner Koch <wk@gnupg.org>
* ttyio.c (do_get): Fixed a serious format string bug. Thanks to
fish stiqz.
2001-05-23 Werner Koch <wk@gnupg.org>
* secmem.c (EPERM): Try to work around a Slackware problem.
2001-05-05 Werner Koch <wk@gnupg.org>
* http.c (http_start_data): Flush before writing.
(http_wait_response): No need to flush here.
2001-04-27 Werner Koch <wk@gnupg.org>
* memory.c (out_of_core): Print an explanation on reasons why
secret memory can get exhausted.
2001-04-23 Werner Koch <wk@gnupg.org>
* http.c (http_wait_response): Implement new flag to inhibit the
TCP shutdown.
2001-04-20 Werner Koch <wk@gnupg.org>
* http.c (http_start_data): Use write_server and not the iobuf
stuff. I wonder why we are at all using write_server - shouldn't
it be handled by iobuf?
* strgutil.c (set_native_charset): Allow utf-8 by introducing the
new no_translation variable.
(native_to_utf8): Handle no_translation.
(utf8_to_native): Ditto.
2001-04-19 Werner Koch <wk@gnupg.org>
* miscutil.c (asctimestamp): Handle negative times. We must do
this because Windoze segvs on negative times passed to gmtime().
(strtimestamp): Ditto.
2001-04-14 Werner Koch <wk@gnupg.org>
* strgutil.c (utf8_to_native): Fixed a segv. Thanks to Keith Clayton.
2001-04-13 Werner Koch <wk@gnupg.org>
* iobuf.c (iobuf_fopen): Removed because it is not used and
furthermore mode is ignored for an fname of "-". Suggested by
Florian Weimer.
2001-04-02 Werner Koch <wk@gnupg.org>
* iobuf.c (translate_file_handle): New. Use this function
everywhere in this file.
(iobuf_translate_file_handle): Always use the osfhandle stuff here
because callers don't know the implementation details of iobuf and
they expect that the handles are translated.
2001-03-29 Werner Koch <wk@gnupg.org>
* miscutil.c (answer_is_yes): An empty string does now return no.
(answer_is_yes_no_quit): Likewise.
* iobuf.c (iobuf_close): Burn the buffers.
2001-03-26 Werner Koch <wk@gnupg.org>
* ttyio.c: Define TERMDEVICE depending on OS.
* http.c (http_start_data): send a CRLF and not just a LF.
Pointed out by Steven Murdoch.
2001-03-13 Werner Koch <wk@gnupg.org>
* iobuf.c (iobuf_sockopen): New.
(sock_filter) [__MINGW32__]: New.
(iobuf_ioctl): New.
(file_filter): Implemented keep_open mode.
* http.c (http_open, http_wait_response): Replaced iobuf_fdopen by
iobuf_sockopen and use an iobuf_ioctl to avoid the dup().
(deinit_sockets, init_sockets) [__MINGW32__]: New.
(connect_server, write_server): Add code to work with W32 sockets.
2001-03-12 Werner Koch <wk@gnupg.org>
* strgutil.c (check_trailing_chars,check_trailing_ws): New.
2001-03-08 Werner Koch <wk@gnupg.org>
* argparse.c (default_strusage): Changed year of printed copyright
to 2001.
* iobuf.c (fd_cache_invalidate, fd_cache_close, fd_cache_open): New.
(direct_open): Invalidate the fd_cache for read access.
(file_filter): Cache the close here.
(iobuf_open): Use new my_fopen_ro macro to try the cache first.
2001-03-07 Werner Koch <wk@gnupg.org>
* iobuf.c: Made the old stdio file handling cpp conditional
controlled by FILE_FILTER_USES_STDIO and added a new
open/read/close based one. We don't need the stdio buffering
becuase we are doing our own buffering anyway. And it is a
prerequesite to allow the use of ReadFile et al for W32 which in
turn is needed to make the http stuff work there. The new W32
stuff has also been implemented. Minor changes to all open functions.
(direct_open): New.
(file_filter): Core of the new read/write handling.
(iobuf_get_filelength): Use W32 API function here. But it is
currently limited to 2GB files.
(iobuf_seek): Ditto.
2001-03-01 Werner Koch <wk@gnupg.org>
* errors.c (g10_errstr): New codes UNU_SECKEY and UNU_PUBKEY.
2000-12-28 Werner Koch <wk@gnupg.org>
* dotlock.c: Made all_lockfiles volatile.
(remove_lockfiles): Made public.
2000-11-30 Werner Koch <wk@gnupg.org>
* iobuf.c (iobuf_translate_file_handle): New.
(iobuf_open, iobuf_create): Use it for special filenames
2000-11-11 Paul Eggert <eggert@twinsun.com>
* iobuf.c (iobuf_get_filelength): Now returns off_t, not u32.
Remove kludges to worry about large files; the callers check
for files that are too large, and they should already be doing
the right thing in an implementation-independent way.
(fopen, fstat): Remove macros.
* iobuf.c (iobuf_set_limit, iobuf_tell, iobuf_seek):
Use off_t, not ulong, for file offsets.
(<limits.h>): Include if needed.
(LONG_MAX, LONG_MIN): Define a substitute if needed.
(fseeko): Define a substitute if needed.
* iobuf.c (iobuf_seek): Do not use %lu to report file
2000-11-09 Werner Koch <wk@gnupg.org>
* iobuf.c (iobuf_enable_special_filenames): New.
(check_special_filename): New.
(iobuf_open): check for special filenames.
(iobuf_create): Ditto.
2000-10-23 Werner Koch <wk@gnupg.org>
* secmem.c (lock_pool): Don't print warning for Windows.
2000-10-16 Werner Koch <wk@gnupg.org>
* secmem.c (lock_pool): Fixed error checking for Linux.
By James Troup.
Thu Sep 14 14:20:38 CEST 2000 Werner Koch <wk@openit.de>
* miscutil.c (answer_is_yes_no_quit): Swapped order of yes/no test
so that no is returned for an empty input. By David Champion.
Wed Sep 6 17:55:47 CEST 2000 Werner Koch <wk@openit.de>
* iobuf.c: Use fopen64 insead of fopen when available.
(iobuf_get_filelength): Use fstat64 when available but return
2^32-1 if the file is larger than this value.
Wed Sep 6 14:59:09 CEST 2000 Werner Koch <wk@openit.de>
* secmem.c (secmem_realloc): check for failed secmem_malloc. By
Matt Kraai.
* strgutil.c (utf8_to_native): Fixed null ptr problem. By
Giampaolo Tomassoni.
Thu Jul 27 10:02:38 CEST 2000 Werner Koch <wk@openit.de>
* iobuf.c: Use setmode() at several places to set stdin and stdout
to binary mode for MSDOS based systems
* iobuf.c (underflow): Initialize dummy_len to keep memory checker happy.
Fri Jun 9 10:09:52 CEST 2000 Werner Koch <wk@openit.de>
* ttyio.c: Simulate termios with termios. By Dave Dykstra.
Thu Jun 8 20:22:00 CEST 2000 Werner Koch <wk@openit.de>
* secmem.c (lock_pool,secmem_init): Additional check for dropped privs.
Tue May 30 16:37:55 CEST 2000 Werner Koch <wk@openit.de>
* iobuf.c (iobuf_cancel): Fix for MSDOS.
Fri Apr 14 19:37:08 CEST 2000 Werner Koch <wk@openit.de>
* dotlock.c (disable_dotlock): New. Implmented this in the module.
2000-03-09 14:04:22 Werner Koch (wk@habibti.openit.de)
* argparse.c (default_strusage): Changed year of default copyright.
Tue Mar 7 18:45:31 CET 2000 Werner Koch <wk@gnupg.de>
* secmem.c (lock_pool): No more warning for QNX. By Sam Roberts.
2000-03-02 15:51:04 Werner Koch (wk@habibti.gnupg.de)
* ttyio.c (tty_print_utf8_string): Oops.
Thu Mar 2 15:37:46 CET 2000 Werner Koch <wk@gnupg.de>
* ttyio.c (tty_print_utf8_string2): New to allow a max output size.
Wed Feb 23 10:07:57 CET 2000 Werner Koch <wk@gnupg.de>
* miscutil.c (asctimestamp): Fix for possible buffer overflow by
large system returned date format string.
Fri Dec 31 14:08:15 CET 1999 Werner Koch <wk@gnupg.de>
* logger.c (log_inc_errorcount): New.
Sat Dec 4 12:30:28 CET 1999 Werner Koch <wk@gnupg.de>
* iobuf.c (iobuf_cancel): Broadcast the new Cancel mesaage to all
filters.
Mon Nov 22 11:14:53 CET 1999 Werner Koch <wk@gnupg.de>
* strgutil.c (strcasecmp): New.
* secmem.c (pool_is_mmapped): Made volatile.
Sat Oct 9 20:34:41 CEST 1999 Werner Koch <wk@gnupg.de>
* Makefile.am: Removed libtool.
Fri Oct 8 20:32:01 CEST 1999 Werner Koch <wk@gnupg.de>
* w32reg.c: New.
* simple-gettext.c: Use the Registry to locate the mo file.
* http.c (send_request): Add support for proxys; suggested by
Walter Hofmann.
(http_open_document): Pass flags to http_open.
Fri Sep 17 12:56:42 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* secmem.c (lock_pool): Check for ENOSYS return my mlock() on
old SCOs.
* ttyio.c (do_get): Replaced #if __MINGW32__ by #ifdef becuase
gcc 2.95.1 assigns a floating point value (0.2) to this macro,
which in turn can't be used in an expression.
Wed Sep 15 16:22:17 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* simple-gettext.c: New.
Wed Sep 1 15:30:44 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* argparse.c (arg_parse): Add standard options to the dump-options
output.
Tue Aug 31 17:20:44 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* strgutil (utf8_to_native): Implemented.
(check_utf8_string): Removed.
* miscutil.c (make_printable_string): Fixed possible buffer overflow.
(print_utf8_string): New.
* ttyio.c (tty_print_utf8_string): New.
Mon Aug 30 20:38:33 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* secmem.c (pool_okay): declared volatile.
* miscutil.c (answer_is_yes): Always check for plain "yes".
(answer_is_yes_no_quit): Likewise.
* dotlock.c (create_dotlock): Fixed segv during cleanup.
Mon Jul 12 14:55:34 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* argparse.c (initialize): Init ret_xxx.
(optfile_parse): Remove quotes from arguments.
Wed Jul 7 13:08:40 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* memory.c (membug): Use if either M_DEBUG or M_GUARD is used.
* miscutil.c (scan_isodatestr): New.
* logger.c (g10_log_mpidump): Moved to ../mpi/mpicoder.c
(g10_log_print_prefix): Renamed from print_prefix and made global.
* Makefile.am: Support for libtool.
Thu Jul 1 12:47:31 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* miscutil.c (make_printable_string): New.
* strgutil.c (add_to_strlist2,append_to_strlist2): New.
Tue Jun 29 21:44:25 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* secmem.c (USE_CAPABILITIES): Capabilities support (Remi).
Sat Jun 26 12:15:59 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* dotlock.c (create_dotlock): s/uts/utsbuf/ cause there an Amdahl
system with the name UTS (Dave Dykstra).
* secmem.c (DEFAULT_POOLSIZE): Doubled the size.
Fri Jun 18 00:18:02 CEST 1999 Michael Roth <mroth@nessie.de>
* iobuf.c: file_filter() Detection of EOF on terminals
improved/fixed (see Bug #21).
Mon Jun 14 21:18:54 CEST 1999 Michael Roth <mroth@nessie.de>
* ttyio.c: tty_no_terminal() new.
Sat Jun 5 15:30:33 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* strgutil.c (set_native_charset): Support Latin-2
Tue Jun 1 16:01:46 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* iobuf.c (iobuf_get_real_fname): Made global and now keep a
copy of the name in the iobuf struct.
Mon May 31 19:41:10 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* iobuf.c (file_filter,block_filter): Speed patches (R駑i).
Thu May 27 09:40:55 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* miscutil.c (answer_is_yes_no_quit): New.
Sun May 23 14:20:22 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* dotlock.c: Tweaked to make it compile under mingw32
* http.c: Disabled for mingw32.
Sat May 22 22:47:26 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* logger.c (log_set_logfile): New.
Thu May 20 14:04:08 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* memory.c (membug): Nanu, there was a const instead of a static.
* strgutil.c (trim_trailing_chars): New.
Mon May 17 21:54:43 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* logger.c (g10_log_hexdump): Made 2nd arg a const.
Wed Apr 28 13:03:03 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* miscutil.c (asctimestamp): Use nl_langinfo (Ga? Qu駻i).
Sun Apr 18 10:11:28 CEST 1999 Werner Koch <wk@isil.d.shuttle.de>
* argparse.c (store_alias): Disabled becuase it is not used.
* ttyio.c (tty_batchmode): New
Sat Mar 20 11:44:21 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* http.c: Swapped to includes.
Tue Mar 2 16:44:57 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* strgutil.c (get_native_charset): New.
Fri Feb 26 17:55:41 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* secmem.c (memblock_struct): Force align (R駑i Guyomarch)
Wed Feb 24 11:07:27 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* iobuf.c (block_filter): Fixed the oscillating partial packet chunks.
Fri Feb 19 15:49:15 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* iobuf.c (iobuf_push_filter2): New to allow transer of context
ownership to the iobuf. Released the context where needed.
Tue Feb 16 14:10:02 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* strgutil.c (add_to_strglist): Clear the new flags field
(append_to_strglist): Ditto.
* dotlock.c (read_lockfile): terminate pidstr (Michael).
Wed Feb 10 17:15:39 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* dotlock.c (remove_lockfiles): Add cleanup function.
(make_dotlock): Add deadlock check.
* secmem.c (secmem_malloc): Changed error message.
Wed Jan 20 21:40:21 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* http.c (http_wait_response): Moved the shutdown behind the dup
Wed Jan 20 18:59:49 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* http.c (send_request): Removed double LF
Tue Jan 19 19:34:58 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* * iobuf.c (iobuf_push_filter): Allow filters for temp streams
(iobuf_write_temp): Ditto.
(iobuf_flush_temp): New.
(iobuf_unget_and_close_temp): Removed.
* http.c (close_http_document): Renamed to http_close().
(open_http_document): Renamed to http_open_document().
(http_open): New.
(http_start_data): New.
(http_wait_response): New.
Sun Jan 17 11:04:33 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* strgutil.c (trim_trailing_ws): New.
Sat Jan 16 12:03:27 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* http.c (connect_server): Fixed stupid bug.
Sat Jan 16 09:27:30 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* http.c: New
Wed Jan 13 14:10:15 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* iobuf.c (iobuf_fdopen): New.
Sat Jan 9 16:02:23 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* secmem.c (lock_pool): add another check that setuid() worked.
(secmem_init): Ditto.
Thu Jan 7 18:00:58 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* iobuf.c (iobuf_clear_eof): Removed.
(underflow): Changed the eof handling.
(iobuf_pop_filter): Made static and renamed to pop_filter.
* iobuf.c (iobuf_read_line): New.
Sun Jan 3 15:28:44 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* dotlock.c (make_dotlock): print another informal message.
(make_dotlock): Removed the cpp checks.
Tue Dec 29 14:41:47 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* secmem.c: Moved unistd.h out of the #ifdef
* dotlock.c (make_dotlock): Sun has no SYS_NMLN
* iobuf.c (iobuf_unget_and_close_temp): Reset .start
Sat Dec 12 18:40:32 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* argparse.c (arg_pars): fixed opts[i] with negative index.
Fri Nov 27 21:37:41 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* dotlock.c: Implemented
Wed Nov 25 11:30:07 1998 Werner Koch (wk@isil.d.shuttle.de)
* iobuf.c (iobuf_pop_filter): Fixed sigsegv after error.
Thu Nov 19 07:09:55 1998 Werner Koch <werner.koch@guug.de>
* miscutil.c (strtimevalue): New.
Tue Nov 10 10:01:53 1998 Werner Koch (wk@isil.d.shuttle.de)
* strgutil.c (set_native_charset): New.
(native_to_utf8): Now handles koi8-r.
Tue Nov 3 16:17:56 1998 Werner Koch (wk@isil.d.shuttle.de)
* strgutil.c (native_to_utf8): New.
(utf8_to_native): New, but only as a stub.
* argparse.c (optfile_parse): Trimmed spaces from args.
Wed Oct 28 08:01:49 1998 me,,, (wk@tobold)
* argparse.c (find_long_option): New.
(arg_parse): option=value is now allowed. Add a new internal
option "--dump-options".
Thu Oct 22 16:25:49 1998 Michael Roth (mroth@nessie.de)
* fileutil.c (make_basename): New.
(make_dirname): New.
Wed Oct 21 12:20:29 1998 Werner Koch (wk@isil.d.shuttle.de)
* util.c (iobuf_flush): autoincreasing of a temp. iobuf
(iobuf_temp_with_content): New.
Tue Oct 13 12:40:13 1998 Werner Koch (wk@isil.d.shuttle.de)
* util.c (.nofast): set this variable
Wed Oct 7 19:27:50 1998 Werner Koch (wk@isil.d.shuttle.de)
* memory.c (m_print_stats): New.
Tue Oct 6 09:53:56 1998 Werner Koch (wk@isil.d.shuttle.de)
* strgutil.c (memicmp): Add HAVE_MEMICMP.
Mon Sep 21 19:45:01 1998 Werner Koch (wk@(none))
* secmem.c: New flags to allow suspend/resume of warnings.
Fri Sep 18 16:25:47 1998 Werner Koch (wk@(none))
* secmem.c (lock_pool): Kludge for broken mlock on HPUX 10.20
Tue Sep 15 17:52:21 1998 Werner Koch (wk@(none))
* miscutil.c (asctimestamp): New.
Mon Sep 14 09:38:18 1998 Werner Koch (wk@(none))
* secmem.c (init_pool): Now mmaps /dev/zero if we do not have MAP_ANON.
Wed Sep 9 13:52:28 1998 Werner Koch (wk@(none))
* ttyio.c (do_get): Ctrl-D is now a valid but special character
Mon Sep 7 13:52:41 1998 Werner Koch (wk@(none))
* iobuf.c (get_real_fname): New and changed file_filter datastructures
and their initialization.
Tue Aug 11 15:12:35 1998 Werner Koch (wk@(none))
* miscutil.c (answer_is_yes): i18ned
Sat Aug 8 18:35:00 1998 Werner Koch (wk@(none))
* ttyio.c (cleanup): New.
Mon Aug 3 17:06:00 1998 Werner Koch (wk@(none))
* secmem.c (MAP_ANON): Add a macro test
Wed Jul 29 14:53:34 1998 Werner Koch (wk@(none))
* ttyio.c (tty_get_answer_is_yes): New.
Tue Jul 21 10:35:48 1998 Werner Koch (wk@(none))
* argparse.c: New option flag to distinguish options and commands.
Sat Jul 18 19:49:30 1998 Werner Koch (wk@(none))
* argparse.c (arg_parse): Added -? as alias for -h
Thu Jul 9 14:47:20 1998 Werner Koch (wk@isil.d.shuttle.de)
* secmem.c (secmem_init): Drops setuid if called with 0.
Tue Jul 7 11:49:25 1998 Werner Koch (wk@isil.d.shuttle.de)
* logger.c (log_set_filename): New.
Mon Jul 6 09:03:49 1998 Werner Koch (wk@isil.d.shuttle.de)
* strgutil.c (append_to_strlist): New.
Thu Jul 2 15:55:44 1998 Werner Koch (wk@isil.d.shuttle.de)
* iobuf.c (block_filter): Add writing of OP partial length headers.
Fri Jun 26 10:38:35 1998 Werner Koch (wk@isil.d.shuttle.de)
* ttyio.c (do_get): all iso8859-1 characters are now allowed.
Thu Jun 25 15:57:21 1998 Werner Koch (wk@isil.d.shuttle.de)
* secmem.c (lock_pool): Removed left over test code.
Wed Jun 10 07:39:41 1998 Werner Koch,mobil,,, (wk@tobold)
* fileutil.c (compare_filenames): New.
* argparse.c (arg_parse): New flag bit 6 to ignore --version
Thu May 14 16:45:13 1998 Werner Koch (wk@isil.d.shuttle.de)
* argparse.c (show_help): Add some formatting stuff
Fri May 8 17:06:49 1998 Werner Koch (wk@isil.d.shuttle.de)
* errors.c (strerror): New if !HAVE_STRERROR
Mon May 4 19:48:03 1998 Werner Koch (wk@isil.d.shuttle.de)
* iobuf.c (iobuf_read): Code is now faster.
* (iobuf_write): ditto.
Mon Apr 27 11:01:32 1998 Werner Koch (wk@isil.d.shuttle.de)
* strgutil.c (memicmp): New.
Thu Mar 19 11:29:03 1998 Werner Koch (wk@isil.d.shuttle.de)
* strgutil.c (memistr): Add const to return and first arg.
Sat Mar 7 11:54:35 1998 Werner Koch (wk@isil.d.shuttle.de)
* miscutil.c (print_string): New arg delim; changed all callers.
Thu Mar 5 12:19:30 1998 Werner Koch (wk@isil.d.shuttle.de)
* errors.c: New strings.
Thu Mar 5 12:06:31 1998 Werner Koch (wk@isil.d.shuttle.de)
* iobuf.c (iobuf_open): A name of "-" now opens stdin.
* fileutil.c (print_fname_stdout, print_fname_stdin): New.
Fri Feb 27 10:20:03 1998 Werner Koch (wk@isil.d.shuttle.de)
* memory.c (m_is_secure): Removed.
* secmem.c (m_is_secure): Moved to here.
* secmem.c (secmem_realloc): New.
* memory.c (M_GUARD,EXTRA_ALIGN): New (all functions).
Thu Feb 26 14:36:51 1998 Werner Koch (wk@isil.d.shuttle.de)
* secmem.c (lock_pool): No error if EAGAIN is returned instead
of EPERM.
Fri Feb 20 17:43:05 1998 Werner Koch (wk@isil.d.shuttle.de)
* ttyio.c [MINGW32]: Add support for mingw32.
Tue Feb 17 19:43:44 1998 Werner Koch (wk@isil.d.shuttle.de)
* memory.c (dump_table_at_exit): New.
Mon Feb 16 10:07:28 1998 Werner Koch (wk@isil.d.shuttle.de)
* argparse.c (show_version, show_help, default_strusage): Changed
according to GNU standards.
Mon Feb 16 08:58:25 1998 Werner Koch (wk@isil.d.shuttle.de)
* iobuf.c (iobuf_peek): New
Fri Feb 13 19:34:59 1998 Werner Koch (wk@isil.d.shuttle.de)
* iobuf.c (iobuf_seek): Set counters to new offset.
Fri Feb 13 17:13:04 1998 Werner Koch (wk@isil.d.shuttle.de)
* logger.c (log_set_name, log_get_name): New.
(print_prefix, pgm_name): New, changed all function to make use it.
(log_mpidump): Removed the "DBG" prefix.
(log_hexdump): Ditto.
* logger.c (printstr): Removed.
Fri Feb 13 15:14:13 1998 Werner Koch (wk@isil.d.shuttle.de)
* argparse.c (show_help): New '\v' kludge.
Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005 Free Software Foundation, Inc.
This file is free software; as a special exception the author gives
unlimited permission to copy and/or distribute it, with or without
modifications, as long as this notice is preserved.
This file is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
diff --git a/util/secmem.c b/util/secmem.c
index dc8a8f087..5a4affd42 100644
--- a/util/secmem.c
+++ b/util/secmem.c
@@ -1,520 +1,522 @@
/* secmem.c - memory allocation from a secure heap
* Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
* 2007 Free Software Foundation, Inc.
*
* This file is part of GnuPG.
*
* GnuPG is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* GnuPG is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA.
*/
#include <config.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <stdarg.h>
#include <unistd.h>
#if defined(HAVE_MLOCK) || defined(HAVE_MMAP)
#include <sys/mman.h>
#include <sys/types.h>
#include <fcntl.h>
#ifdef USE_CAPABILITIES
#include <sys/capability.h>
#endif
#ifdef HAVE_PLOCK
#include <sys/lock.h>
#endif
#endif
#include "types.h"
#include "memory.h"
#include "util.h"
#include "i18n.h"
/* MinGW doesn't seem to prototype getpagesize, though it does have
it. */
#if !HAVE_DECL_GETPAGESIZE
int getpagesize(void);
#endif
#if defined(MAP_ANON) && !defined(MAP_ANONYMOUS)
#define MAP_ANONYMOUS MAP_ANON
#endif
/* It seems that Slackware 7.1 does not know about EPERM */
#if !defined(EPERM) && defined(ENOMEM)
#define EPERM ENOMEM
#endif
#define DEFAULT_POOLSIZE 16384
typedef struct memblock_struct MEMBLOCK;
struct memblock_struct {
unsigned size;
union {
MEMBLOCK *next;
PROPERLY_ALIGNED_TYPE aligned;
} u;
};
static void *pool;
static volatile int pool_okay; /* may be checked in an atexit function */
#ifdef HAVE_MMAP
static volatile int pool_is_mmapped;
#endif
static size_t poolsize; /* allocated length */
static size_t poollen; /* used length */
static MEMBLOCK *unused_blocks;
static unsigned max_alloced;
static unsigned cur_alloced;
static unsigned max_blocks;
static unsigned cur_blocks;
static int disable_secmem;
static int show_warning;
static int no_warning;
static int suspend_warning;
static void
print_warn(void)
{
if (!no_warning)
{
log_info(_("WARNING: using insecure memory!\n"));
log_info(_("please see http://www.gnupg.org/faq.html"
" for more information\n"));
}
}
static void
lock_pool( void *p, size_t n )
{
#if defined(USE_CAPABILITIES) && defined(HAVE_MLOCK)
int err;
cap_set_proc( cap_from_text("cap_ipc_lock+ep") );
err = mlock( p, n );
if( err && errno )
err = errno;
cap_set_proc( cap_from_text("cap_ipc_lock+p") );
if( err ) {
if( errno != EPERM
#ifdef EAGAIN /* OpenBSD returns this */
&& errno != EAGAIN
#endif
#ifdef ENOSYS /* Some SCOs return this (function not implemented) */
&& errno != ENOSYS
#endif
#ifdef ENOMEM /* Linux can return this */
&& errno != ENOMEM
#endif
)
log_error("can't lock memory: %s\n", strerror(err));
show_warning = 1;
}
#elif defined(HAVE_MLOCK)
uid_t uid;
int err;
uid = getuid();
#ifdef HAVE_BROKEN_MLOCK
/* ick. but at least we get secured memory. about to lock
entire data segment. */
#ifdef HAVE_PLOCK
# ifdef _AIX
/* The configure for AIX returns broken mlock but the plock has
the strange requirement to somehow set the stack limit first.
The problem might turn out in indeterministic program behaviour
and hanging processes which can somehow be solved when enough
processes are clogging up the memory. To get this problem out
of the way we simply don't try to lock the memory at all.
*/
errno = EPERM;
err = errno;
# else /* !_AIX */
err = plock( DATLOCK );
if( err && errno )
err = errno;
# endif /*_AIX*/
#else /*!HAVE_PLOCK*/
if( uid ) {
errno = EPERM;
err = errno;
}
else {
err = mlock( p, n );
if( err && errno )
err = errno;
}
#endif /*!HAVE_PLOCK*/
#else
err = mlock( p, n );
if( err && errno )
err = errno;
#endif
if( uid && !geteuid() ) {
/* check that we really dropped the privs.
* Note: setuid(0) should always fail */
if( setuid( uid ) || getuid() != geteuid() || !setuid(0) )
log_fatal("failed to reset uid: %s\n", strerror(errno));
}
if( err ) {
if( errno != EPERM
#ifdef EAGAIN /* OpenBSD returns this */
&& errno != EAGAIN
#endif
#ifdef ENOSYS /* Some SCOs return this (function not implemented) */
&& errno != ENOSYS
#endif
#ifdef ENOMEM /* Linux can return this */
&& errno != ENOMEM
#endif
)
log_error("can't lock memory: %s\n", strerror(err));
show_warning = 1;
}
#elif defined ( __QNX__ )
/* QNX does not page at all, so the whole secure memory stuff does
* not make much sense. However it is still of use because it
* wipes out the memory on a free().
* Therefore it is sufficient to suppress the warning
*/
#elif defined (HAVE_DOSISH_SYSTEM) || defined (__CYGWIN__)
/* It does not make sense to print such a warning, given the fact that
* this whole Windows !@#$% and their user base are inherently insecure
*/
#elif defined (__riscos__)
/* no virtual memory on RISC OS, so no pages are swapped to disc,
* besides we don't have mmap, so we don't use it! ;-)
* But don't complain, as explained above.
*/
#else
log_info("Please note that you don't have secure memory on this system\n");
#endif
}
static void
init_pool( size_t n)
{
- size_t pgsize=-1;
+ long int pgsize_val;
+ size_t pgsize;
poolsize = n;
if( disable_secmem )
log_bug("secure memory is disabled");
#if defined(HAVE_SYSCONF) && defined(_SC_PAGESIZE)
- pgsize = sysconf(_SC_PAGESIZE);
+ pgsize_val = sysconf (_SC_PAGESIZE);
#elif defined(HAVE_GETPAGESIZE)
- pgsize = getpagesize();
+ pgsize_val = getpagesize ();
+#else
+ pgsize_val = -1;
#endif
+ pgsize = (pgsize_val != -1 && pgsize_val > 0)? pgsize_val : 4096;
- if(pgsize==-1)
- pgsize = 4096;
#ifdef HAVE_MMAP
poolsize = (poolsize + pgsize -1 ) & ~(pgsize-1);
#ifdef MAP_ANONYMOUS
pool = mmap( 0, poolsize, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
#else /* map /dev/zero instead */
{ int fd;
fd = open("/dev/zero", O_RDWR);
if( fd == -1 ) {
log_error("can't open /dev/zero: %s\n", strerror(errno) );
pool = (void*)-1;
}
else {
pool = mmap( 0, poolsize, PROT_READ|PROT_WRITE,
MAP_PRIVATE, fd, 0);
close (fd);
}
}
#endif
if( pool == (void*)-1 )
log_info("can't mmap pool of %u bytes: %s - using malloc\n",
(unsigned)poolsize, strerror(errno));
else {
pool_is_mmapped = 1;
pool_okay = 1;
}
#endif
if( !pool_okay ) {
pool = malloc( poolsize );
if( !pool )
log_fatal("can't allocate memory pool of %u bytes\n",
(unsigned)poolsize);
else
pool_okay = 1;
}
lock_pool( pool, poolsize );
poollen = 0;
}
/* concatenate unused blocks */
static void
compress_pool(void)
{
/* fixme: we really should do this */
}
void
secmem_set_flags( unsigned flags )
{
int was_susp = suspend_warning;
no_warning = flags & 1;
suspend_warning = flags & 2;
/* and now issue the warning if it is not longer suspended */
if( was_susp && !suspend_warning && show_warning ) {
show_warning = 0;
print_warn();
}
}
unsigned
secmem_get_flags(void)
{
unsigned flags;
flags = no_warning ? 1:0;
flags |= suspend_warning ? 2:0;
return flags;
}
/* Returns 1 if memory was locked, 0 if not. */
int
secmem_init( size_t n )
{
if( !n ) {
#ifndef __riscos__
#ifdef USE_CAPABILITIES
/* drop all capabilities */
cap_set_proc( cap_from_text("all-eip") );
#elif !defined(HAVE_DOSISH_SYSTEM)
uid_t uid;
disable_secmem=1;
uid = getuid();
if( uid != geteuid() ) {
if( setuid( uid ) || getuid() != geteuid() || !setuid(0) )
log_fatal("failed to drop setuid\n" );
}
#endif
#endif /* !__riscos__ */
}
else {
if( n < DEFAULT_POOLSIZE )
n = DEFAULT_POOLSIZE;
if( !pool_okay )
init_pool(n);
else
log_error("Oops, secure memory pool already initialized\n");
}
return !show_warning;
}
void *
secmem_malloc( size_t size )
{
MEMBLOCK *mb, *mb2;
int compressed=0;
if( !pool_okay ) {
log_info(
_("operation is not possible without initialized secure memory\n"));
log_info(_("(you may have used the wrong program for this task)\n"));
exit(2);
}
if( show_warning && !suspend_warning ) {
show_warning = 0;
print_warn();
}
/* Blocks are always a multiple of 32. Note that we allocate an
extra of the size of an entire MEMBLOCK. This is required
becuase we do not only need the SIZE info but also extra space
to chain up unused memory blocks. */
size += sizeof(MEMBLOCK);
size = ((size + 31) / 32) * 32;
retry:
/* try to get it from the used blocks */
for(mb = unused_blocks,mb2=NULL; mb; mb2=mb, mb = mb->u.next )
if( mb->size >= size ) {
if( mb2 )
mb2->u.next = mb->u.next;
else
unused_blocks = mb->u.next;
goto leave;
}
/* allocate a new block */
if( (poollen + size <= poolsize) ) {
mb = (void*)((char*)pool + poollen);
poollen += size;
mb->size = size;
}
else if( !compressed ) {
compressed=1;
compress_pool();
goto retry;
}
else
return NULL;
leave:
cur_alloced += mb->size;
cur_blocks++;
if( cur_alloced > max_alloced )
max_alloced = cur_alloced;
if( cur_blocks > max_blocks )
max_blocks = cur_blocks;
return &mb->u.aligned.c;
}
void *
secmexrealloc( void *p, size_t newsize )
{
MEMBLOCK *mb;
size_t size;
void *a;
mb = (MEMBLOCK*)((char*)p - ((size_t) &((MEMBLOCK*)0)->u.aligned.c));
size = mb->size;
if (size < sizeof(MEMBLOCK))
log_bug ("secure memory corrupted at block %p\n", (void *)mb);
size -= ((size_t) &((MEMBLOCK*)0)->u.aligned.c);
if( newsize <= size )
return p; /* It is easier not to shrink the memory. */
a = secmem_malloc( newsize );
if ( a ) {
memcpy(a, p, size);
memset((char*)a+size, 0, newsize-size);
secmem_free(p);
}
return a;
}
void
secmem_free( void *a )
{
MEMBLOCK *mb;
size_t size;
if( !a )
return;
mb = (MEMBLOCK*)((char*)a - ((size_t) &((MEMBLOCK*)0)->u.aligned.c));
size = mb->size;
/* This does not make much sense: probably this memory is held in the
* cache. We do it anyway: */
wipememory2(mb, 0xff, size );
wipememory2(mb, 0xaa, size );
wipememory2(mb, 0x55, size );
wipememory2(mb, 0x00, size );
mb->size = size;
mb->u.next = unused_blocks;
unused_blocks = mb;
cur_blocks--;
cur_alloced -= size;
}
/* Check whether P points into the pool. */
static int
ptr_into_pool_p (const void *p)
{
/* We need to convert pointers to addresses. This is required by
C-99 6.5.8 to avoid undefined behaviour. Using size_t is at
least only implementation defined. See also
http://lists.gnupg.org/pipermail/gcrypt-devel/2007-February/001102.html
*/
size_t p_addr = (size_t)p;
size_t pool_addr = (size_t)pool;
return p_addr >= pool_addr && p_addr < pool_addr+poolsize;
}
int
m_is_secure( const void *p )
{
return pool_okay && ptr_into_pool_p (p);
}
/****************
* Warning: This code might be called by an interrupt handler
* and frankly, there should really be such a handler,
* to make sure that the memory is wiped out.
* We hope that the OS wipes out mlocked memory after
* receiving a SIGKILL - it really should do so, otherwise
* there is no chance to get the secure memory cleaned.
*/
void
secmem_term()
{
if( !pool_okay )
return;
wipememory2( pool, 0xff, poolsize);
wipememory2( pool, 0xaa, poolsize);
wipememory2( pool, 0x55, poolsize);
wipememory2( pool, 0x00, poolsize);
#ifdef HAVE_MMAP
if( pool_is_mmapped )
munmap( pool, poolsize );
#endif
pool = NULL;
pool_okay = 0;
poolsize=0;
poollen=0;
unused_blocks=NULL;
}
void
secmem_dump_stats()
{
if( disable_secmem )
return;
fprintf(stderr,
"secmem usage: %u/%u bytes in %u/%u blocks of pool %lu/%lu\n",
cur_alloced, max_alloced, cur_blocks, max_blocks,
(ulong)poollen, (ulong)poolsize );
}

File Metadata

Mime Type
text/x-diff
Expires
Tue, Jul 8, 12:32 PM (1 d, 3 h)
Storage Engine
local-disk
Storage Format
Raw Data
Storage Handle
89/e4/e56dc47b936012236df1cc8c4b4a

Event Timeline