Page MenuHome GnuPG
Files F29856764

No OneTemporary
Actions

View Options

This document is not UTF8. It was detected as ISO-8859-1 (Latin 1) and converted to UTF8 for display.
diff --git a/BUGS b/BUGS
index 6e8756833..59a411861 100644
--- a/BUGS
+++ b/BUGS
@@ -1,49 +1,55 @@
List of some known bugs
-------------------------
This following list contains those bugs which we are aware of. Please
make sure that bugs you report are not listed here. If you can fix one
of these bugs/limitations we will certainly be glad to receive a patch.
(Please note that we need a disclaimer if a patch is longer than about
10 lines; but it may help anyway to show us where we have to fix it. Do
an "info standards" to find out why a disclaimer is needed for GNU.)
Format: severity: [ *] to [***], no, first reported, by, version.
Bugs which are marked with "FIX: yyyy-mm-dd" are fixed in the CVS
and after about half a day in the rsync snapshots.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[ *] #1
pgp263in works fine even with a source file with CR,LF but GnuPG
and pgp263in has problems if the clearsign has been created by
pgp263ia.
[ *] #3
--list-packets should continue even w/o a passphrase (or in batch
mode). Maybe we have to move it to a separate program??
[ *] #4 1999-01-13 <ralf.stephan@fitug.de> 0.9.1
v3 key 'expiration date' problem:
1. generate a key, set expiration date
2. <do other things, deleting etc.>
3. edit a v3 secret key, try to set expiration date
- output: "You can't change...
4. save
5. key has expiration date from 1. and gpg reports that pubkey
and seckey differ.
The for loop the exp.date is set before v3 detection?
[is this bug still there?]
[ *] #5
/home/jam/.gnupg/pubring.gpg: can't open gdbm file: Can't be writer
keyblock resource `/home/jam/.gnupg/pubring.gpg': file open error
OOPS in close enum_keyblocks - ignored
[gdbm is experimental and will be replaced by the new keybox code]
[***] #6 1999-02-22 <backes@rhrk.uni-kl.de> 0.9.3
Buserror on IRIX 6.4: Crash while doing a keygen. I think while creating
the prime. Other buserrors are reported when doing a "gpg README"
on sparc-solaris2.6.
--> I hope I've fixed this: Please, can someone check this.
I can't reproduce it on the alpha I have access to.
+[ **] #12 1999-03-10
+ gpg --list-secret-keys --with-colon SEGVs
+ FIX: 1999-03-10
+
+Next #13
+
diff --git a/TODO b/TODO
index af8e8ced8..2956e8a9e 100644
--- a/TODO
+++ b/TODO
@@ -1,37 +1,38 @@
* Finish the EGD module.
* Implement 256 bit key Twofish.
* Check revocation and expire stuff. [I'm currently working on this.]
* Check calculation of key validity. [I'm currently working on this.]
* See why we always get this "Hmmm public key lost"
* print a warning when a revoked/expired secret key is used.
* remove more "Fixmes"
* Use capabilities if available. glibc2 does not support it yet?
What about 2.2 or should we use the system calls directly?
* when decryptiong multiple key: print a warning only if no usable pubkey
encrypt package was found. Extension: display a list of all recipients.
+ * describe the Lim-Lee algorithms
Nice to have
------------
* Do a real fix for bug #7 or document that it is a PGP 5 error.
* clearsig: Keep lineendings while writing the output of a clearsig
* preferences of hash algorithms are not yet used.
* new menu to delete signatures and list signature in menu
* Replace the SIGUSR1 stuff by semaphores to avoid loss of a signal.
or use POSIX.4 realtime signals.
* add test cases for invalid data (scrambled armor or other random data)
* add checking of armor trailers
* Burn the buffers used by fopen(), or use read(2). Does this
really make sense?
* change the fake_data stuff to mpi_set_opaque
* Stats about used random numbers.
diff --git a/VERSION b/VERSION
index a602fc9e2..7a030aa1a 100644
--- a/VERSION
+++ b/VERSION
@@ -1 +1 @@
-0.9.4
+0.9.4a
diff --git a/g10/ChangeLog b/g10/ChangeLog
index 9e3e460bd..f76baf987 100644
--- a/g10/ChangeLog
+++ b/g10/ChangeLog
@@ -1,1711 +1,1716 @@
+Wed Mar 10 11:26:18 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
+
+ * keylist.c (list_keyblock): Fixed segv in uid. Print 'u' as
+ validity of sks.
+
Mon Mar 8 20:47:17 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* getkey.c (classify_user_id): Add new mode 12 (#<lid>).
* seckey-cert.c (check_secret_key): replaced error by info.
* trustdb.c (query_trust_info): Add another arg, changed all callers.
(check_trust): Ditto.
(do_check): Ditto.
(verify_key): Handle namehash.
* keylist.c (list_keyblock): print trust info for user ids.
* sig-check.c (signature_check): Add sig-created to status output.
Tue Mar 2 16:44:57 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* textfilter.c (copy_clearsig_text): New.
(clearsign): Removed.
* sign.c (clearsign_file): does not use textfiler anymore.
* keygen.c (ask_user_id): print a note about the used charset.
Tue Mar 2 10:38:42 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* sig-check.c (signature_check): sig-id now works for all algos.
* armor.c (armor_filter): Fixed armor bypassing.
Sun Feb 28 19:11:00 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* keygen.c (ask_user_id): Don't change the case of email addresses.
(has_invalid_email_chars): Adjusted.
* keylist.c (list_one): Really list serect keys (Remi Guyomarch)
* keyedit.c (menu_select_uid): Add some braces to make egcs happy.
(menu_select_key): Ditto.
* mainproc.c (do_proc_packets): List sym-enc packets (Remi Guyomarch)
Fri Feb 26 17:55:41 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* pkclist.c (build_pk_list): Return error if there are no recipients.
* sig-check.c (signature_check): New signature id feature.
* armor.c (make_radic64_string): New.
* mainproc.c (proc_pubkey_enc): early check for seckey availability.
* pkclist.c (do_we_trust_pre): print user id before asking.
* ringedit.c (add_keyblock_resource,get_keyblock_handle): Cleaner
handling of default resource.
Thu Feb 25 18:47:39 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* pkclist.c (algo_available): New.
(select_algo_from_prefs): Check whether algo is available.
* ringedit.c (keyring_copy): Take care of opt.dry_run.
(do_gdbm_store): Ditto.
* openfile.c (open_outfile). Ditto.
(copy_options_file): Ditto.
* trustdb.c (update_trustdb): Ditto.
(clear_trust_checked_flag): Ditto.
(update_trust_record): Ditto.
(insert_trust_record): Ditto.
Wed Feb 24 11:07:27 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* keylist.c (secret_key_list): Now really list the secret key.
* trustdb.c (do_init_trustdb): New. Init is now deferred.
Mon Feb 22 20:04:00 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* getkey.c (lookup_sk): Return G10ERR_NO_SECKEY and not x_PUBKEY.
Fri Feb 19 15:49:15 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* pkclist.c (select_algo_from_prefs): retrieve LID if not there.
* armor.c (fake_packet): Replaced ugly lineending handling.
* g10.c (oNoEncryptTo): New.
* pkclist.c (build_pk_list): Implemented this option.
* g10.c (main): Greeting is now printed to stderr and not to tty.
Use add_to_strlist() instead of direct coding.
* import.c (import): Use iobuf_push_filter2.
* mainproc.c (check_sig_and_print): Print all user ids
for good signatures.
* getkey.c (get_pubkeyblock): New.
* import.c (chk_self_sigs): Fixed SEGV for unbounded class 0x18 keys.
(delete_inv_parts): Delete special marked packets.
Tue Feb 16 14:10:02 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* g10.c (main): New option --encrypt-to
* pkclist.c (build_pk_list): Implemented encrypt-to.
* parse-packet.c (parse_user_id): Removed the hack to work with
utf-8 strings.
* g10.c (main): Install lockfile cleanup handler.
* tdbio.c (cleanup): Removed: this is now handled by dotlock.
Sat Feb 13 14:13:04 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* tdbio.c (tdbio_set_dbname): Init lockhandle for a new trustdb
Wed Feb 10 17:15:39 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* g10.c (main): check for development version now in configure
* tdbio.c (tdbio_write_record): Add uid.validity
(tdbio_read_record) : Ditto.
(tdbio_dump_record) : Ditto.
* keygen.c (keygen_add_std_prefs): Replaced Blowfish by Twofish,
removed MD5 and Tiger.
* pubkey-enc.c (get_it): Suppress warning about missing Blowfish
in preferences in certain cases.
* ringedit.c (lock_rentry,unlock_rentry): New.
* getkey.c (key_byname): Pass ret_kb down to lookup_xx.
* armor.c (armor_filter): No output of of empty comment lines.
Add option --no-version to suppress the output of the version string.
* getkey.c: Release the getkey context for auto context variables.
Sun Jan 24 18:16:26 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* getkey.c: Changed the internal design to allow simultaneous
lookup of multible user ids
(get_pubkey_bynames): New.
(get_seckey_bynames): New.
(get_seckey_next): New.
(get_seckey_end): New.
* keylist.c (list_one): Use the new functions.
* keylist.c (list_keyblock): add a newline for normal listings.
* g10.c (--recipient): New option name to replace --remote-user
Wed Jan 20 18:59:49 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* textfilter.c: Mostly rewritten
* plaintext.c (handle_plaintext): Use now text_filter semantics.
Tue Jan 19 19:34:58 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* export.c (export_pubkeys_stream): New.
(do_export_stream): New.
* g10.c (aSendKeys): New command.
* hkp.c (hkp_export): New.
* compress.c (do_uncompress): Hack for algo 1 and 1.1.3
Sun Jan 17 11:04:33 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* textfilter.c (text_filter): Now uses iobuf_read_line().
(read_line): Removed.
* armor.c (trim_trailing_spaces): Removed and replaced
by trim_trailing_ws from libutil
Sat Jan 16 12:03:27 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* hkp.c (hkp_ask_import): Use only the short keyid
Sat Jan 16 09:27:30 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* import.c (import_key_stream): New
(import): New, moved most of import_keys here.
* g10.c: New option --keyserver
* mainproc.c (check_sig_and_print): Hook to import a pubkey.
* pref.c pref.h : Removed
* hkp.c hkp.h: New
Wed Jan 13 14:10:15 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* armor.c (radix64_read): Print an error if a bad armor was detected.
Wed Jan 13 12:49:36 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* armor.c (radix64_read): Now handles malformed armors produced
by some buggy MUAs.
Tue Jan 12 11:17:18 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* ringedit.c (find_keyblock_bysk): New.
* skc_list.c (is_insecure): New.
(build_sk_list): usage check for insecure keys.
* import.c (chk_self_sigs): Add handling for subkeys.
(delete_inv_parts): Skip unsigned subkeys
* sig-check.c (do_check): Print info if the signature is older
than the key.
* keygen.c (generate_subkeypair): Fail on time warp.
* sign.c (do_sign): Ditto.
Sun Jan 10 15:10:02 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* armor.c (fake_packet): Fixed not-dash-escaped bug.
Sat Jan 9 16:02:23 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* sig-check.c (do_check): Output time diff on error
* status.c (STATUS_VALIDSIG): New.
(is_status_enabled): New.
* mainproc.c (check_sig_and_print): Issue that status message.
* plaintext.c (special_md_putc): Removed
* armor.c (armor_filter): print error for truncated lines.
* free-packet.c (free_encrypted): Revomed call to set_block_mode.
(free_plaintext): Ditto.
Thu Jan 7 18:00:58 CET 1999 Werner Koch <wk@isil.d.shuttle.de>
* pkclist.c (add_ownertrust): Fixed return value.
* encr-data.c (decrypt_data): Disabled iobuf_set_limit and
iobuf_pop_filter stuff.
* compress.c (handle_compressed): Disabled iobuf_pop_filter.
* packet.h (PKT_secret_key): Add is_primary flag.
* parse-packet.c (parse_key): Set this flag.
* passphrase.c (passphrase_to_dek): Kludge to print the primary
keyid - changed the API: keyid must now hold 2 keyids.
* getkey.c (get_primary_seckey): New.
* seckey-cert.c (do_check): pass primary keyid to passphrase query
* tbdio.c (open_db): removed the atexit
(tdbio_set_dbname): and moved it to here.
* armor.c: Rewrote large parts.
Tue Dec 29 19:55:38 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* revoke.c (gen_revoke): Removed compression.
* pkclist.c (do_we_trust_pre): special check for revoked keys
* trustdb.c (update_trust_record): Fixed revoke flag.
Tue Dec 29 14:41:47 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* misc.c (disable_core_dumps): Check for EINVAL (Atari)
* getkey (merge_one_pk_and_selfsig): Fixed search of expiredate.
(merge_keys_and_selfsig): Ditto.
* free-packet.c (cmp_public_keys): cmp expire only for v3 packets
(cmp_secret_keys): Ditto.
(cmp_public_secret_key): Ditto.
Wed Dec 23 17:12:24 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* armor.c (find_header): Reset not_dashed at every header
Wed Dec 23 13:18:14 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* pkclist.c (add_ownertrust): Refresh validity values.
* trustdb.c (enum_cert_paths_print): New arg refresh.
* ringedit.c: Fixed problems fix keyrings
* parse-packet.c (dbg_parse_packet): New debug functions.
* getkey.c (getkey_disable_caches): New.
* import.c (import_keys): Disable caches.
Thu Dec 17 18:31:15 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* misc.c (trap_unaligned): Only for glibc 1
* sign.c (write_dash_escaped): Now escapes "From " lines
* g10.c: New option --escape-from-lines
* trustdb.c (sort_tsl_list): New
(list_trust_path): Now prints sorted list.
(enum_cert_paths): Likewise.
(enum_cert_paths_print): New.
(print_paths): New printing format.
* pkclist.c (add_ownertrust): New arg quit.
(edit_ownertrust): New quit selection and does not query
the recipients ownertrust anymore.
(add_ownertrust): Print the ceritficate path.
Mon Dec 14 21:18:49 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* parse-packet.c (parse_signature): Now checks for critical bit
(parse_sig_subpkt): Splitted.
(parse_one_sig_subpkt): New.
* sig-check.c (do_check): handle critical bit.
Sun Dec 13 14:10:56 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* pcklist.c (select_algo_from_prefs): Preferences should
now work (lost the != ? )
Thu Dec 10 20:15:36 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* ringedit.c (gdbm_store): Fix for inserts
* g10.c (main): New option --export-all
* export.c (export_pubkeys): New arg.
(do_export): Now may skip old keys.
* status.c: Minor patches for Sun's cc
* keygen.c (ask_algo): Disabled v3 ElGamal choice, rearranged
the numbers. Add a warning question when a sign+encrypt key
is selected.
* g10.c (do_not_use_RSA): Removed.
* misc.c (print_pubkey_algo_note): New as replacement for the
do_not_use_RSA() and chnaged all callers.
(print_cipher_algo_note): New.
(print_hash_algo_note): New.
* cipher.c (write_header): Add a call to print_cipher_algo_note.
* seckey-cert.c (protect_secret_key): Ditto
* sign.c (do_sign): Add a call to print_digest_algo_note.
* getkey.c (get_long_user_id_string): New.
* mainproc.c (check_sig_and_print): Changed the format of the
status output.
* encrypt.c (write_pubkey_enc_from_list): print used symmetric cipher.
* pkclist.c (do_we_trust): Changed a message.
Wed Dec 9 13:41:06 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* misc.c (trap_unaligned) [ALPHA]: Only if UAC_SIGBUS is defined.
* sign.c (write_dash_escaped): Add the forgotten patch by Brian Moore.
* compress.c (do_uncompress): Fixed the inflating bug.
Tue Dec 8 13:15:16 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* trustdb.c (upd_uid_record): Now uses the newest self-signature
(insert_trust_record): Now calls update with recheck set to true.
(register_trusted_key): New.
(verify_own_keys): Enhanced by list of trusted keys.
* g10.c (main): Print a warning when a devel version is used.
(main): New option --trusted-key
* import.c (merge_blocks): Fixed merging of new user ids and
added merging of subkeys.
(append_uid): Ditto.
(merge_keysig): New.
(append_key): New.
* getkey.c (merge_one_pk_and_selfsig): Get the expiration time
from the newest self-signature.
(merge_keys_and_selfsig): Ditto.
* free-packet.c (cmp_secret_key): New.
Fri Nov 27 21:37:41 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* g10.c: New option --lock-once
* tdbio.c (open_db): Add an atexit
(cleanup): New.
(tdbio_sync): Add locking.
(tdbio_end_transaction): Ditto.
(put_record_into_cache): Ditto.
* ringedit.c (keyring_copy): Ditto.
(cleanup): New.
(add_keyblock_resource): Add an atexit.
Fri Nov 27 15:30:24 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* armor.c (find_header): Another fix for clearsigs.
Fri Nov 27 12:39:29 CET 1998 Werner Koch <wk@isil.d.shuttle.de>
* status.c (display_help): Removed.
* helptext.c: New and removed the N_() from all cpr_gets.
Fri Nov 20 16:54:52 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (main): New option --not-dash-escaped
* sign.c (write_dashed_escaped): Ditto.
* armor.c (find_header): Support for NotDashEscaped header.
* getkey.c: print "disabled cache.." only if verbose is used.
Thu Nov 19 07:17:31 1998 Werner Koch <werner.koch@guug.de>
* parse-packet.c (dump_sig_subpkt): Fixed expire listing
* getkey.c (merge_keys_and_selfsig): Fixed expire calculation.
(merge_one_pk_and_selfsig): Ditto.
* keyedit.c (menu_expire). Ditto.
* keygen.c (keygen_add_key_expire): Ditto.
(ask_expire_interval): New and changed all local function to use
this instead.
(keygen_add_key_expire): Opaque should now be a public key;
changed all callers.
* parse.packet.c (parse): use skip_rest to skip packets.
* keyedit.c (keyedit_menu): New arg for cmdline cmds.
Wed Nov 18 20:33:50 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c (check_trustdb): Now rechecks all gived userids.
(collect_paths): Some fixes.
(upd_pref_records): Skips empty items, evaluate all items.
* parse-packet.c (dump_sig_subpkt): Better listing of prefs.
(skip_packet): Now knows about marker packet
* g10.c: removed cmd "--edit-sig".
* pubring.asc: Updated.
Sat Nov 14 14:01:29 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (main): Changed syntax of --list-trust-path
* trustdb.c (list_trust_path): Replaced max_depth by
opt.max_cert_depth
Fri Nov 13 07:39:58 1998 Werner Koch <werner.koch@guug.de>
* trustdb.c (collect_paths): Removed a warning message.
(enum_trust_web): Removed.
(enum_cert_paths): New.
* pkclist.c (add_ownertrust): Changed to use enum_cert_paths.
(edit_ownertrust): Now list ceritficates on request.
(show_paths): New.
Wed Nov 11 18:05:44 1998 Werner Koch <werner.koch@guug.de>
* g10.c (main): New option --max-cert-depth
* tdbio.h: add new fields to ver and dir record.
* tdbio.c: read/write/dump of these fields.
(tdbio_db_matches_options): New.
* trustdb.c: replaced MAC_CERT_DEPTH by opt.max_cert_depth.
(do_check): cache validity and changed other functions
to reset the cached value.
* keylist.c (list_one): Now lists the ownertrust.
* mainproc.c (list_node): Ditto.
Tue Nov 10 10:08:59 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (g10_exit): Now looks at the new g10_errors_seen.
* mainproc.c (check_sig_and_print): Sets g10_errors_seen.
* *.c : i18n many more strings.
* ringedit.c (locate_keyblock_by_keyid): Add HAVE_LIBGDBM
(locate_keyblock_by_fpr): Ditto.
* g10.c (main): removed unsused "int errors".
(main): Add new option --charset.
* g10.c (main): special message for the unix newbie.
Mon Nov 9 07:17:42 1998 Werner Koch <werner.koch@guug.de>
* getkey.c (finish_lookup): Kludge to prefere algo 16.
* trustdb.c (new_lid_table): Clear cached item.
* status.c (cpr_get_utf8): New.
* pkclist.c (build_pk_list): Uses this.
Sun Nov 8 17:20:39 1998 Werner Koch (wk@isil.d.shuttle.de)
* mainproc.c (check_sig_and_print): Why did I use strlen()-1
in the printf? - This truncated the TZ.
Sat Nov 7 15:57:28 1998 me,,, (wk@tobold)
* getkey.c (lookup): Changes to support a read_next.
(get_pubkey): Fixed a memory leak.
* keylist.c (list_one): Now lists all matching user IDs.
Tue Nov 3 16:19:21 1998 Werner Koch (wk@isil.d.shuttle.de)
* keygen.c (ask_user_id): Now converted to UTF-8
* g10.c (main): Kludge for pgp clearsigs and textmode.
Fri Oct 30 16:40:39 1998 me,,, (wk@tobold)
* signal.c (block_all_signals): New.
(unblock_all_signals): New
* tdbio.c (tdbio_end_transaction): Now blocks all signals.
* trustdb.c (new_lid_table): Changed the representation of the
former local_lid_info stuff.
* trustdb.c (update_trust_record): Reorganized the whole thing.
* sig-check.c (check_key_signature): Now handles class 0x28
Wed Oct 28 18:56:33 1998 me,,, (wk@tobold)
* export.c (do_export): Takes care of the exportable sig flag.
Tue Oct 27 14:53:04 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c (update_trust_record): New "fast" parameter.
Sun Oct 25 19:32:05 1998 Werner Koch (wk@isil.d.shuttle.de)
* openfile.c (copy_options_File): New.
* ringedit.c (add_keyblock_resource): Creates options file
* tdbio.c (tdbio_set_dbname): Ditto.
Sat Oct 24 14:10:53 1998 brian moore <bem@cmc.net>
* mainproc.c (proc_pubkey_enc): Don't release the DEK
(do_proc_packets): Ditto.
Fri Oct 23 06:49:38 1998 me,,, (wk@tobold)
* keyedit.c (keyedit_menu): Comments are now allowed
* trustdb.c: Rewrote large parts.
Thu Oct 22 15:56:45 1998 Michael Roth (mroth@nessie.de)
* encode.c: (encode_simple): Only the plain filename without
a given directory is stored in generated packets.
(encode_crypt): Ditto.
* sign.c: (sign_file) Ditto.
Thu Oct 22 10:53:41 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c (update_trust_record): Add new optional arg.
* import.c (import_keys): Add statistics output
* trustdb.c (update_trustdb): Ditto.
(insert_trustdb): Ditto.
* tdbio.c (tdbio_begin_transaction): New.
(tdbio_end_transaction): New.
(tdbio_cancel_transaction): New.
* g10.c (main): New option --quit.
* trustdb.c (check_hint_sig): No tests for user-id w/o sig.
This caused an assert while checking the sigs.
* trustdb.c (upd_sig_record): Splitted into several functions.
* import.c (import_keys): New arg "fast".
* g10.c (main): New command --fast-import.
Wed Oct 21 18:19:36 1998 Michael Roth <mroth@nessie.de>
* ringedit.c (add_keyblock_resource): Directory is now created.
* tdbio.c (tdbio_set_dbname): New info message.
Wed Oct 21 11:52:04 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c (update_trustdb): released keyblock in loop.
* keylist.c (list_block): New.
(list_all): Changed to use list_block.
* trustdb.c: Completed support for GDBM
* sign.c (only_old_style): Changed the way force_v3 is handled
(sign_file): Ditto.
(clearsign_file): Ditto.
* keygen.c (has_invalid_email_chars): Splitted into mailbox and
host part.
* keylist.c (list_one): Add a merge_keys_and_selfsig.
* mainproc.c (proc_tree): Ditto.
Sun Oct 18 11:49:03 1998 Werner Koch (wk@isil.d.shuttle.de)
* sign.c (only_old_style): Add option force_v3_sigs
(sign_file): Fixed a bug in sig->version
(clearsign_file): Ditto.
* parse-packet.c (dump_sig_subpkt): New
* keyedit.c (menu_expire): New.
* free-packet.c (cmp_signatures): New
Sat Oct 17 10:22:39 1998 Werner Koch (wk@isil.d.shuttle.de)
* armor.c: changed output line length from 72 to 64.
* keyedit.c (fix_keyblock): New.
Fri Oct 16 10:24:47 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c: Rewrote most.
* tdbio.c: Add cache and generalized hash tables.
* options.h (ENABLE_COMMENT_PACKETS): New but undef'ed.
* encode.c, sign.c, keygen.c: Disabled comment packets.
* export.c (do_export): Comment packets are never exported,
except for those in the secret keyring.
* g10.c (main): Removed option do-no-export-rsa; should be
be replaced by a secpial tool.
* export.c (do_export): Removed the code for the above option.
* armor.c (find_header): Support for new only_keyblocks.
* import.c (import_keys): Only looks for keyblock armors.
* packet.h: replaced valid_days by expiredate and changed all users.
* build-packet.c (do_public_key): calculates valid-days
(do_secret_key): Ditto.
* parse-packet.c (parse_key): expiredate is calucated from the
valid_period in v3 packets.
* keyid.c (do_fingerprint_md): calculates valid_dates.
* keygen.c (add_key_expire): fixed key expiration time for v4 packets.
* armor.c (find_header): A LF in the first 28 bytes
was skipped for non-armored data.
Thu Oct 8 11:35:51 1998 Werner Koch (wk@isil.d.shuttle.de)
* armor.c (is_armored): Add test on old comment packets.
* tdbio.c (tdbio_search_dir_bypk): fixed memory leak.
* getkey.c: Changed the caching algorithms.
Wed Oct 7 19:33:28 1998 Werner Koch (wk@isil.d.shuttle.de)
* kbnodes.c (unused_nodes): New.
Wed Oct 7 11:15:36 1998 Werner Koch (wk@isil.d.shuttle.de)
* keyedit.c (sign_uids): Fixed a problem with SK which could caused
a save of an unprotected key.
(menu_adduid): Ditto.
* keyedit.c (keyedit_menu): Prefs are now correctly listed for
new user ids.
* trustdb.c (update_trust_record): New.
(insert_trust_record): Now makes use of update_trust_record.
Tue Oct 6 16:18:03 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c (read_record): replaces most of the tdbio_read_records.
(write_record): Ditto.
Sat Oct 3 11:01:21 1998 Werner Koch (wk@isil.d.shuttle.de)
* keygen.c (ask_alogo): enable ElGamal enc-only only for addmode.
Wed Sep 30 10:15:33 1998 Werner Koch (wk@isil.d.shuttle.de)
* import.c (import_one): Fixed update of wrong keyblock.
Tue Sep 29 08:32:08 1998 me,,, (wk@tobold)
* mainproc.c (proc_plaintext): Display note for special filename.
* plaintext.c (handle_plaintext): Suppress output of special file.
Mon Sep 28 12:57:12 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (verify_own_keys): Add warning if a key is not protected.
* passphrase (hash_passphrase): Fixed iterated+salted mode and
setup for keysizes > hashsize.
* g10.c (main): New options: --s2k-{cipher,digest,mode}.
Fri Sep 25 09:34:23 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c: Chnaged some help texts.
Tue Sep 22 19:34:39 1998 Werner Koch (wk@isil.d.shuttle.de)
* passphrase.c (read_passphrase_from_fd): fixed bug for long
passphrases.
Mon Sep 21 11:28:05 1998 Werner Koch (wk@(none))
* getkey.c (lookup): Add code to use the sub key if the primary one
does not match the usage.
* armor.c (armor_filter): New error message: no valid data found.
(radix64_read): Changes to support multiple messages.
(i18n.h): New.
* mainproc.c (add_onepass_sig): bug fix.
Mon Sep 21 08:03:16 1998 Werner Koch (wk@isil.d.shuttle.de)
* pkclist.c (do_we_trust): Add keyid to most messages.
* passphrase.c (read_passphrase_from_fd): New.
(have_static_passphrase): New
(get_passphrase_fd): Removed.
(set_passphrase_fd): Removed.
* g10.c (main): passphrase is now read here.
* keyedit.c (keyedit_menu): "help" texts should now translate fine.
Mon Sep 21 06:40:02 1998 Werner Koch (wk@isil.d.shuttle.de)
* encode.c (encode_simple): Now disables compression
when --rfc1991 is used.
(encode_crypt): Ditto.
Fri Sep 18 16:50:32 1998 Werner Koch (wk@isil.d.shuttle.de)
* getkey.c (merge_key_and_selfsig): New.
Fri Sep 18 10:20:11 1998 Werner Koch (wk@isil.d.shuttle.de)
* pkclist.c (select_algo_from_prefs): Removed 3DES kludge.
* seskey.c (make_session_key): Fixed SERIOUS bug introduced
by adding the weak key detection code.
* sign.c (sign_file): Changed aremor header in certain cases.
Tue Sep 15 17:52:55 1998 Werner Koch (wk@isil.d.shuttle.de)
* mainproc.c (check_sig_and_print): Replaced ascime by asctimestamp.
Mon Sep 14 11:40:52 1998 Werner Koch (wk@isil.d.shuttle.de)
* seskey.c (make_session_key): Now detects weak keys.
* trustdb (clear_trust_checked_flag): New.
* plaintext.c (handle_plaintext): Does no anymore suppress CR from
cleartext signed messages.
Sun Sep 13 12:54:29 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c (insert_trust_record): Fixed a stupid bug in the free
liunked list loops.
Sat Sep 12 15:49:16 1998 Werner Koch (wk@isil.d.shuttle.de)
* status.c (remove_shmid): New.
(init_shm_comprocess): Now sets permission to the real uid.
Wed Sep 9 11:15:03 1998 Werner Koch (wk@isil.d.shuttle.de)
* packet.h (PKT_pubkey_enc): New flah throw_keyid, and add logic to
implement it.
* g10.c (main): New Option --throw-keyid
* getkey.c (enum_secret_keys): Add new ar and changed all callers.
Tue Sep 8 20:04:09 1998 Werner Koch (wk@isil.d.shuttle.de)
* delkey.c (delete_key): Moved from keyedit.c.
Mon Sep 7 16:37:52 1998 Werner Koch (wk@isil.d.shuttle.de)
* build-packet.c (calc_length_header): New arg new_ctb to correctly
calculate the length of new style packets.
* armor.c (is_armored): Checks for symkey_enc packets.
* pkclist.c (select_algo_from_prefs): 3DEs substitute is now CAST5.
Tue Aug 11 17:54:50 1998 Werner Koch (wk@isil.d.shuttle.de)
* build-packet.c (do_secret_key): Fixed handling of old keys.
* getkey.c (compare_name): Fixed exact and email matching
* openfile.c (open_outfile): Changed arguments and all callers.
Tue Aug 11 09:14:35 1998 Werner Koch (wk@isil.d.shuttle.de)
* encode.c (encode_simple): Applied option set-filename and comment.
(encode_crypt): Ditto.
* sign.c (sign_file): Ditto.
* armor.c (armor_filter): Applied option comment.
* encode.c (encode_crypt): Moved init_packet to the begin.
(encode_simple): add an init_packet().
* comment (write_comment): Now enforces a hash sign as the 1st byte.
* import.c (import_one): Add explanation for "no user ids".
* compress.c (do_uncompress): Applied Brian Warner's patch to support
zlib 1.1.3 etc.
* trustdb.c (check_trust): Fixed a problem after inserting new keys.
* getkey (lookup): do not return the primary key if usage is given
(lookup_sk): Ditto and take usage into account.
* status.c (cpr_get_answer_is_yes): add display_help.
Mon Aug 10 10:11:28 1998 Werner Koch (wk@isil.d.shuttle.de)
* getkey.c (lookup_sk): Now always returns the primary if arg
primary is true.
(lookup): Likewise.
(get_pubkey_byname): Now returns the primary key
(get_seckey_byname): Ditto.
Mon Aug 10 08:34:03 1998 Werner Koch (wk@isil.d.shuttle.de)
* keyid.c (pubkey_letter): ELG_E is now a small g.
Sat Aug 8 17:26:12 1998 Werner Koch (wk@isil.d.shuttle.de)
* openfile (overwrite_filep): Changed semantics and all callers.
Sat Aug 8 12:17:07 1998 Werner Koch (wk@isil.d.shuttle.de)
* status.c (display_help): New.
Thu Aug 6 16:30:41 1998 Werner Koch,mobil,,, (wk@tobold)
* seskey.c (encode_session_key): Now uses get_random_bits().
Thu Aug 6 07:34:56 1998 Werner Koch,mobil,,, (wk@tobold)
* ringedit.c (keyring_copy): No more backupfiles for
secret keyrings and add additional warning in case of
a failed secret keyring operation.
Wed Aug 5 11:54:37 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (check_opts): Moved to main. Changed def_cipher_algo
semantics and chnaged all users.
* pubkey-enc.c (get_sssion_key): New informational output
about preferences.
* parse-packet.c (parse_symkeyenc): Fixed salted+iterated S2K
(parse_key): Ditto.
* build-packet.c (do_secret_key): Ditto.
(do_symkey_enc): Ditto.
Tue Aug 4 08:59:10 1998 Werner Koch (wk@isil.d.shuttle.de)
* getkey.c (enum_secret_keys): Now returns only primary keys.
* getkey (lookup): Now sets the new namehash field.
* parse-packet.c (parse_sig_subpkt2): New.
* sign.c (sign_file): one-pass sigs are now emiited reverse.
Preference data is considered when selecting the compress algo.
Wed Jul 29 12:53:03 1998 Werner Koch (wk@isil.d.shuttle.de)
* free-packet.c (copy_signature): New.
* keygen.c (generate_subkeypair): rewritten
* g10.c (aKeyadd): Removed option --add-key
Mon Jul 27 10:37:28 1998 Werner Koch (wk@isil.d.shuttle.de)
* seckey-cert.c (do_check): Additional check on cipher blocksize.
(protect_secret_key): Ditto.
* encr-data.c: Support for other blocksizes.
* cipher.c (write_header): Ditto.
Fri Jul 24 16:47:59 1998 Werner Koch (wk@isil.d.shuttle.de)
* kbnode.c (insert_kbnode): Changed semantics and all callers.
* keyedit.c : More or less a complete rewrite
Wed Jul 22 17:10:04 1998 Werner Koch (wk@isil.d.shuttle.de)
* build-packet.c (write_sign_packet_header): New.
Tue Jul 21 14:37:09 1998 Werner Koch (wk@isil.d.shuttle.de)
* import.c (import_one): Now creates a trustdb record.
* g10.c (main): New command --check-trustdb
Mon Jul 20 11:15:07 1998 Werner Koch (wk@isil.d.shuttle.de)
* genkey.c (generate_keypair): Default key is now DSA with
encryption only ElGamal subkey.
Thu Jul 16 10:58:33 1998 Werner Koch (wk@isil.d.shuttle.de)
* keyid.c (keyid_from_fingerprint): New.
* getkey.c (get_pubkey_byfprint): New.
Tue Jul 14 18:09:51 1998 Werner Koch (wk@isil.d.shuttle.de)
* keyid.c (fingerprint_from_pk): Add argument and changed all callers.
(fingerprint_from_sk): Ditto.
Tue Jul 14 10:10:03 1998 Werner Koch (wk@isil.d.shuttle.de)
* plaintext.c (handle_plaintext): Now returns create error if
the file could not be created or the user responded not to overwrite
the file.
* mainproc.c (proc_plaintext): Tries again if the file could not
be created to check the signature without output.
* misc.c (disable_core_dumps): New.
* g10.c (main): disable coredumps for gpg
* g10.c (MAINTAINER_OPTIONS): New to disable some options
Mon Jul 13 16:47:54 1998 Werner Koch (wk@isil.d.shuttle.de)
* plaintext.c (hash_datafiles): New arg for better support of
detached sigs. Changed all callers.
* mainproc.c (proc_signature_packets): Ditto.
* g10.c (main): New option "compress-sigs"
* sig.c (sign_file): detached signatures are not anymore compressed
unless the option --compress-sigs is used.
Thu Jul 9 19:54:54 1998 Werner Koch (wk@isil.d.shuttle.de)
* armor.c: Fixes to allow zero length cleartext signatures
Thu Jul 9 14:52:47 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (build_list): Now drops setuid.
(main): Changed the way keyrings and algorithms are registered .
Wed Jul 8 14:17:30 1998 Werner Koch (wk@isil.d.shuttle.de)
* packet.h (PKT_public_key): Add field keyid.
* parse-packet.c (parse_key): Reset the above field.
* keyid.c (keyid_from_pk): Use above field as cache.
* tdbio.c, tdbio.h: New
* trustdb.c: Moved some functions to tdbio.c.
(print_keyid): New.
* pkclist.c (check_signatures_trust): New.
Wed Jul 8 10:45:28 1998 Werner Koch (wk@isil.d.shuttle.de)
* plaintext.c (special_md_putc): New.
(handle_plaintext): add clearsig argument
* mainproc.c (proc_plaintext): detection of clearsig
* sign.c (write_dased_escaped): Changed clearsig format
Tue Jul 7 18:56:19 1998 Werner Koch (wk@isil.d.shuttle.de)
* armor.c (find_header): Now makes sure that there is only one
empty line for clearsigs, as this is what OP now says.
Mon Jul 6 13:09:07 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (main): New option default-secret-key
* getkey.c (get_seckey_byname): support for this option.
Mon Jul 6 09:03:49 1998 Werner Koch (wk@isil.d.shuttle.de)
* getkey.c (add_keyring): Keyrings are now added to end of the
list of keyrings. The first added keyringwill be created.
(add_secret_keyring): Likewise.
* ringedit.c (add_keyblock_resource): Files are created here.
* g10.c (aNOP): Removed
* getkey.c (lookup): Add checking of usage for name lookups
* packet.h (pubkey_usage): Add a field which may be used to store
usage capabilities.
* pkclist.c (build_pk_list): getkey now called with usage arg.
* skclist.c (build_sk_list): Ditto.
* sign.c (clearsign_file): Fixed "Hash:" headers
Sat Jul 4 13:33:31 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c (list_ownertrust): New.
* g10.c (aListOwnerTrust): New.
* g10.c (def_pubkey_algo): Removed.
* trustdb.c (verify_private_data): Removed and also the call to it.
(sign_private_data): Removed.
Fri Jul 3 13:26:10 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (aEditKey): was aEditSig. Changed usage msg.
* keyedit.c: Done some i18n stuff.
* g10.c (do_not_use_RSA): New.
* sign.c (do_sign): Add call to above function.
* encode.c (write_pubkey_enc_from_list): Ditto.
Thu Jul 2 21:01:25 1998 Werner Koch (wk@isil.d.shuttle.de)
* parse-packet.c: Now is able sto store data of unknown
algorithms.
* free-packet.c: Support for this.
* build-packet.c: Can write data of packet with unknown algos.
Thu Jul 2 11:46:36 1998 Werner Koch (wk@isil.d.shuttle.de)
* parse-packet.c (parse): fixed 4 byte length header
Wed Jul 1 12:36:55 1998 Werner Koch (wk@isil.d.shuttle.de)
* packet.h (new_ctb): New field for some packets
* build-packet.c (build_packet): Support for new_ctb
* parse-packet.c (parse): Ditto.
Mon Jun 29 12:54:45 1998 Werner Koch (wk@isil.d.shuttle.de)
* packet.h: changed all "_cert" to "_key", "subcert" to "subkey".
* free-packet.c (free_packet): Removed memory leak for subkeys.
Sun Jun 28 18:32:27 1998 Werner Koch (wk@isil.d.shuttle.de)
* import.c (import_keys): Renamed from import_pubkeys.
(import_secret_one): New.
* g10.c (aExportSecret): New.
* export.c (export_seckeys): New.
* parse-packet.c (parse_certificate): Cleaned up.
(parse_packet): Trust packets are now considered as unknown.
(parse_pubkey_warning): New.
Fri Jun 26 10:37:35 1998 Werner Koch (wk@isil.d.shuttle.de)
* keygen.c (has_invalid_email_chars): New.
Wed Jun 24 16:40:22 1998 Werner Koch (wk@isil.d.shuttle.de)
* armor.c (armor_filter): Now creates valid onepass_sig packets
with all detected hash algorithms.
* mainproc.c (proc_plaintext): Now uses the hash algos as specified
in the onepass_sig packets (if there are any)
Mon Jun 22 11:54:08 1998 Werner Koch (wk@isil.d.shuttle.de)
* plaintext.c (handle_plaintext): add arg to disable outout
* mainproc.c (proc_plaintext): disable output when in sigs_only mode.
Thu Jun 18 13:17:27 1998 Werner Koch (wk@isil.d.shuttle.de)
* keygen.c: Removed all rsa packet stuff, chnaged defaults
for key generation.
Sun Jun 14 21:28:31 1998 Werner Koch (wk@isil.d.shuttle.de)
* misc.c (checksum_u16): Fixed a stupid bug which caused a
wrong checksum calculation for the secret key protection and
add a backward compatibility option.
* g10.c (main): Add option --emulate-checksum-bug.
Thu Jun 11 13:26:44 1998 Werner Koch (wk@isil.d.shuttle.de)
* packet.h: Major changes to the structure of public key material
which is now stored in an array and not anaymore in a union of
algorithm specific structures. These is needed to make the system
more extendable and makes a lot of stuff much simpler. Changed
all over the system.
* dsa.c, rsa.c, elg.c: Removed.
Wed Jun 10 07:22:02 1998 Werner Koch,mobil,,, (wk@tobold)
* g10.c ("load-extension"): New option.
Mon Jun 8 22:23:37 1998 Werner Koch (wk@isil.d.shuttle.de)
* seckey-cert.c (do_check): Removed cipher constants
(protect_secret_key): Ditto.
Fri May 29 10:00:28 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c (query_trust_info): New.
* keylist.c (list_one): Add output of trust info
* mainproc (list_node): ditto.
* g10.c (main): full trustdb init if -with-colons and any of the
key list modes.
Thu May 28 10:34:42 1998 Werner Koch (wk@isil.d.shuttle.de)
* status.c (STATUS_RSA_OR_IDEA): New.
* sig-check.c (check_signature): Output special status message.
* pubkey-enc.c (get_session_key): Ditto.
* mainproc.c (check_sig_and_print): Changed format of output.
* passpharse.c (passphrase_to_dek): Likewise.
Wed May 27 13:46:48 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (aListSecretKeys): New option --list-secret-keys
* keylist.c (std_key_list): Renamed to public_key_list.
(secret_key_list): New
(list_one, list_all): Add support for secret keys.
* getkey.c (get_secret_keyring): New.
* mainproc.c (list_node): Add option --with-colons for secret keys
* sig-check.c (check_key_signature): detection of selfsigs
* mainproc.c (list_node): fixed listing.
* g10.c (aListSecretKeys): New option --always-trust
* pkclist.c (do_we_trust): Override per option added
* status.c (write_status_text): Add a prefix to every output line.
Wed May 27 07:49:21 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10 (--compress-keys): New.
* options.h (compress_keys): New.
* export.c (export_pubkeys): Only compresses with the new option.
Tue May 26 11:24:33 1998 Werner Koch (wk@isil.d.shuttle.de)
* passphrase.c (get_last_passphrase): New
(set_next_passphrase): New.
(passphrase_to_dek): add support for the above functions.
* keyedit.c (make_keysig_packet): Add sigclass 0x18,
changed all callers due to a new argument.
* keygen.c (write_keybinding): New
(generate_subkeypair): Add functionality
(ask_algo, ask_keysize, ask_valid_days): Broke out of generate_keypair
(ask_user_id, ask_passphrase): Ditto.
Thu May 21 11:26:13 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c,gpgd.c (main): Does now return an int, so that egcs does
not complain.
* armor.c (fake_packet): Removed erro message and add a noticed
that this part should be fixed.
* sign.c (sign_file): Compression now comes in front of encryption.
* encode.c (encode_simple): Ditto.
(encode_crypt): Ditto.
Tue May 19 16:18:19 1998 Werner Koch (wk@isil.d.shuttle.de)
* armor.c (fake_packet): Changed assertion to log_error
Sat May 16 16:02:06 1998 Werner Koch (wk@isil.d.shuttle.de)
* build-packet.c (build_packet): Add SUBKEY packets.
Fri May 15 17:57:23 1998 Werner Koch (wk@isil.d.shuttle.de)
* sign.c (hash_for): New and used in all places here.
* main.h (DEFAULT_): new macros.
* g10.c (opt.def_digest_algo): Now set to 0
* compress.c (init_compress): Add support for algo 1
* options.h (def_compress_algo): New
* g10.c (main): New option --compress-algo
Fri May 15 13:23:59 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (print_mds): New feature to print only one hash,
chnaged formatting.
Thu May 14 15:36:24 1998 Werner Koch (wk@isil.d.shuttle.de)
* misc.c (trap_unaligned) [__alpha__]: New
* g10.c (trap_unaligned): Add call to this to track down SIGBUS
on Alphas (to avoid the slow emulation code).
Wed May 13 11:48:27 1998 Werner Koch (wk@isil.d.shuttle.de)
* build-packet.c (do_signature): Support for v4 pakets.
* keyedit.c (make_keysig_packet): Ditto.
* build-packet.c (build_sig_subpkt_from_sig): New.
(build_sig_subpkt): New.
* elg.c (g10_elg_sign): removed keyid_from_skc.
* dsa.c (g10_dsa_sign): Ditto.
* rsa.c (g10_rsa_sign): Ditto.
* keyedit.c (make_keysig_packet): Add call to keyid_from_skc
* sign.c (clearsign_file): Support for v4 signatures.
(sign_file): Ditto.
Wed May 6 09:31:24 1998 Werner Koch (wk@isil.d.shuttle.de)
* parse-packet.c (do_parse): add support for 5 byte length leader.
(parse_subpkt): Ditto.
* build-packet.c (write_new_header): Ditto.
* packet.h (SIGSUBPKT_): New constants.
* parse-packet.c (parse_sig_subpkt): Changed name, made global,
and arg to return packet length, chnaged all callers
Tue May 5 22:11:59 1998 Werner Koch (wk@isil.d.shuttle.de)
* keygen.c (gen_dsa): New.
* build_packet.c (do_secret_cert): Support for DSA
Mon May 4 19:01:25 1998 Werner Koch (wk@isil.d.shuttle.de)
* compress.c: doubled buffer sizes
* parse-packet.c (do_plaintext): now uses iobuf_read/write.
Mon May 4 09:35:53 1998 Werner Koch (wk@isil.d.shuttle.de)
* seskey.c (encode_md_value): Add optional argument hash_algo,
changed all callers.
* passphrase.c (make_dek_from_passphrase): Removed
* (get_passhrase_hash): Changed name to passphrase_to_dek, add arg,
changed all callers.
* all: Introduced the new ELG identifier and added support for the
encryption only one (which is okay to use by GNUPG for signatures).
Sun May 3 17:50:26 1998 Werner Koch (wk@isil.d.shuttle.de)
* packet.h (PKT_OLD_COMMENT): New name for type 16.
* parse-packet.c (parse_comment): Now uses type 61
Fri May 1 12:44:39 1998 Werner Koch,mobil,,, (wk@tobold)
* packet.h (count): Chnaged s2k count from byte to u32.
* seckey-cert.c (do_check): Changed s2k algo 3 to 4, changed
reading of count.
* build-packet.c (do_secret_cert): ditto.
* parse-packet.c (parse_certificate): ditto.
* parse-packet.c (parse_symkeyenc): New.
* build-packet.c (do_symkey_enc): New.
Thu Apr 30 16:33:34 1998 Werner Koch (wk@isil.d.shuttle.de)
* sign.c (clearsign_file): Fixed "Hash: " armor line.
Tue Apr 28 14:27:42 1998 Werner Koch (wk@isil.d.shuttle.de)
* parse-packet.c (parse_subpkt): Some new types.
Mon Apr 27 12:53:59 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (main): Add option --skip-verify.
* mainproc.c (check_sig_and_print): Ditto.
* g10.c (print_mds): Add output for Tiger.
* sign.c (sign_file): Now uses partial length headers if used
in canonical textmode (kludge to fix a bug).
* parse-packet.c (parse_certificate): Changed BLOWFISH id.
* pubkey-enc.c (get_session_key): Ditto.
* seskey.c (make_session_key): Ditto.
* seckey-cert.c (protect_secret_key,do_check): Add BLOWFISH160.
Fri Apr 24 17:38:48 1998 Werner Koch,mobil,,, (wk@tobold)
* sig-check.c (check_key_signature): Add sig-class 0x14..0x17
* keyedit.c (sign-key): Some changes to start with support of
the above new sig-classes.
Wed Apr 22 09:01:57 1998 Werner Koch,mobil,,, (wk@tobold)
* getkey.c (compare_name): add email matching
Tue Apr 21 16:17:12 1998 Werner Koch,mobil,,, (wk@tobold)
* armor.c (armor_filter): fixed missing last LF before CSUM.
Thu Apr 9 11:35:22 1998 Werner Koch (wk@isil.d.shuttle.de)
* seckey-cert.c (do_check): New; combines all the check functions
into one.
* sign.c: removed all key management functions
* keyedit.c: New.
Thu Apr 9 09:49:36 1998 Werner Koch (wk@isil.d.shuttle.de)
* import.c (chk_self_sigs): Changed an error message.
Wed Apr 8 16:19:39 1998 Werner Koch (wk@isil.d.shuttle.de)
* packet.h: packet structs now uses structs from the pubkey,
removed all copy operations from packet to pubkey structs.
Wed Apr 8 13:40:33 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c (verify_own_certs): Fixed "public key not found".
* getkey.c (key_byname): New, combines public and secret key search.
* pkclist.c (build_pkc_list): Add new arg usage, changed all callers.
* skclist.c (build_skc_list): Likewise.
* ringedit.c (find_keyblock, keyring_search2): Removed.
Wed Apr 8 09:47:21 1998 Werner Koch (wk@isil.d.shuttle.de)
* sig-check.c (do_check): Applied small fix from Ulf Möller.
Tue Apr 7 19:28:07 1998 Werner Koch (wk@isil.d.shuttle.de)
* cipher.c, encr-data.c, seckey-cert.c: Now uses cipher_xxxx
functions instead of blowfish_xxx or cast_xxx
Tue Apr 7 11:04:02 1998 Werner Koch (wk@isil.d.shuttle.de)
* Makefile.am (g10maint.o): Changed the way it is created.
Mon Apr 6 11:17:08 1998 Werner Koch (wk@isil.d.shuttle.de)
* misc.c: New.
* keygen.c (checksum,checksum_u16,checksum_mpi): Moved to misc.c
* seckey-cert.c: Kludge for wrong ELG checksum implementation.
Sat Apr 4 20:07:01 1998 Werner Koch (wk@isil.d.shuttle.de)
* cipher.c (cipher_filter): Support for CAST5
* encr-data.c (decode_filter): Ditto.
(decrypt_data): Ditto.
* seskey.c (make_session_key): Ditto.
* seckey-cert.c (check_elg, check_dsa): Ditto,
(protect_secret_key): Ditto.
* pubkey-enc.c (get_session_key): Ditto.
* passphrase.c (hash_passphrase): Ditto.
Thu Apr 2 20:22:35 1998 Werner Koch (wk@isil.d.shuttle.de)
* gpgd.c: New
Thu Apr 2 10:38:16 1998 Werner Koch (wk@isil.d.shuttle.de)
* keygen.c (generate_keypair): Add valid_days stuff.
* trustdb.c (check_trust): Add check for valid_days.
Wed Apr 1 16:15:58 1998 Werner Koch (wk@isil.d.shuttle.de)
* keygen.c (generate_keypair): Addional question whether the
selected large keysize is really needed.
Wed Apr 1 15:56:33 1998 Werner Koch (wk@isil.d.shuttle.de)
* seckey-cert.c (protect_secret_key): merged protect_xxx to here.
Wed Apr 1 10:34:46 1998 Werner Koch (wk@isil.d.shuttle.de)
* Makefile.am (g10maint.c): Changed creation rule, so that it works
on FreeBSD (missing CFLAGS).
* parse-packet.c (parse_subkey): Removed.
Thu Mar 19 15:22:36 1998 Werner Koch (wk@isil.d.shuttle.de)
* ringedit.c (keyring_enum): Fixed problem with reading too
many packets. Add support to read secret keyrings.
* getkey.c (scan_keyring): Removed
(lookup): New to replace scan_keyring.
(scan_secret_keyring): Removed.
(lookup_skc): New.
Wed Mar 18 11:47:34 1998 Werner Koch (wk@isil.d.shuttle.de)
* ringedit.c (enum_keyblocks): New read mode 11.
* keyid.c (elg_fingerprint_md): New and changed all other functions
to call this if the packet version is 4 or above.
Tue Mar 17 20:46:16 1998 Werner Koch (wk@isil.d.shuttle.de)
* parse-packet.c (parse_certificate): Add listing support for subkeys.
Tue Mar 17 20:32:22 1998 Werner Koch (wk@isil.d.shuttle.de)
* armor.c (is_armored): Allow marker packet.
Thu Mar 12 13:36:49 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c (check_trust): Checks timestamp of pubkey.
* sig-check. (do_check): Compares timestamps.
Tue Mar 10 17:01:56 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (main): Add call to init_signals.
* signal.c: New.
Mon Mar 9 12:43:42 1998 Werner Koch (wk@isil.d.shuttle.de)
* dsa.c: New
* packet.h, free-packet.c, parse-packet.c : Add support for DSA
* sig-check.c, getkey.c, keyid.c, ringedit.c: Ditto.
* seckey-cert.c: Ditto.
* packet.h : Moved .digest_algo of signature packets to outer
structure. Changed all references
Sun Mar 8 13:06:42 1998 Werner Koch (wk@isil.d.shuttle.de)
* openfile.c : Support for stdout filename "-".
* mainproc.c (check_sig_and_print): Enhanced status output:
* status.c (write_status_text): New.
Fri Mar 6 16:10:54 1998 Werner Koch (wk@isil.d.shuttle.de)
* kbnode.c (clone_kbnode): Fixed private_flag.
* mainproc.c (list_node): Output of string "Revoked" as user-id.
Fri Mar 6 14:26:39 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (main): Add userids to "-kv" and cleaned up this stuff.
Fri Mar 6 12:45:58 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (main): Changed semantics of the list-... commands
and added a new one. Removed option "-d"
* decrypt.c: New.
* trustdb.c (init_trustdb): Autocreate directory only if it ends
in "/.gnupg".
Thu Mar 5 12:12:11 1998 Werner Koch (wk@isil.d.shuttle.de)
* mainproc.c (do_proc_packets): New. Common part of proc_packet.
(proc_signature_packets): special version to handle signature data.
* verify.c: New.
* g10.c (aVerify): New.
* plaintext.c (hash_datafiles): New.
* compress.c (handle_compressed): Add callback arg, changed caller.
Thu Mar 5 10:20:06 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c: Is nom the common source for gpg and gpgm
* g10maint.c: Removed
* Makefile.am: Add rule to build g10maint.c
Thu Mar 5 08:43:59 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (main): Changed the way clear text sigs are faked.
Wed Mar 4 19:47:37 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10maint.c (aMuttKeyList): New
* keylist.c: New.
Wed Mar 4 17:20:33 1998 Werner Koch (wk@isil.d.shuttle.de)
* getkey.c (get_pubkey_byname): Kludge to allow 0x prefix.
Tue Mar 3 13:46:55 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10maint.c (main): New option --gen-random.
Tue Mar 3 09:50:08 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (aDeleteSecretKey): New.
(aEditSig): Add option "--edit-key" as synonym for "--edit-sig".
(aDeleteSecretKey): New.
* getkey.c (seckey_available): New.
* sign.c (delete_key): Enhanced to delete secret keys, changed all
callers.
Mon Mar 2 21:23:48 1998 Werner Koch (wk@isil.d.shuttle.de)
* pkc_list.c (build_pkc_list): Add interactive input of user ID.
Mon Mar 2 20:54:05 1998 Werner Koch (wk@isil.d.shuttle.de)
* pkclist.c (do_we_trust_pre): New.
(add_ownertrust): Add message.
* trustdb.c (enum_trust_web): Quick fix.
Mon Mar 2 13:50:53 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (main): New action aDeleteKey
* sign.c (delete_key): New.
Sun Mar 1 16:38:58 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c (do_check): No returns TRUST_UNDEFINED instead of
eof error.
Fri Feb 27 18:14:03 1998 Werner Koch (wk@isil.d.shuttle.de)
* armor.c (find_header): Removed trailing CR on headers.
Fri Feb 27 18:02:48 1998 Werner Koch (wk@isil.d.shuttle.de)
* ringedit.c (keyring_search) [MINGW32]: Open and close file here
because rename does not work on open files. Chnaged callers.
Fri Feb 27 16:43:11 1998 Werner Koch (wk@isil.d.shuttle.de)
* sig-check.c (do_check): Add an md_enable.
* mainproc.c (do_check_sig): Use md_open in case of detached sig
(proc_tree): Take detached sigs into account.
Fri Feb 27 15:22:46 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (main): Make use of GNUPGHOME envvar.
* g10main.c (main): Ditto.
Wed Feb 25 11:40:04 1998 Werner Koch (wk@isil.d.shuttle.de)
* plaintext.c (ask_for_detached_datafile): add opt.verbose to
info output.
* openfile.c (open_sigfile): Try also name ending in ".asc"
Wed Feb 25 08:41:00 1998 Werner Koch (wk@isil.d.shuttle.de)
* keygen.c (generate_keypair): Fixed memory overflow.
Tue Feb 24 15:51:55 1998 Werner Koch (wk@isil.d.shuttle.de)
* parse-packet.c (parse_certificate): Support for S2K.
* build-packet.c (do_secret_cert): Ditto.
* keygen.c (gen_elg): Ditto.
* seckey-cert.c (check_elg): Ditto
(protect_elg): Ditto.
* sign.c (chnage_passphrase): Ditto.
* passphrase.c (get_passphrase_hash): Support for a salt and
changed all callers.
(make_dek_from_passphrase): Ditto.
Tue Feb 24 12:30:56 1998 Werner Koch (wk@isil.d.shuttle.de)
* build-packet.c (hash_public_cert): Disabled debug output.
Fri Feb 20 17:22:28 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c (init_trustdb) [MINGW32]: Removed 2nd mkdir arg.
(keyring_copy) [MINGW32]: Add a remove prior to the renames.
Wed Feb 18 18:39:02 1998 Werner Koch (wk@isil.d.shuttle.de)
* Makefile.am (OMIT_DEPENDENCIES): New.
* rsa.c: Replaced log_bug by BUG.
Wed Feb 18 13:35:58 1998 Werner Koch (wk@isil.d.shuttle.de)
* mainproc.c (do_check_sig): Now uses hash_public_cert.
* parse-packet.c (parse_certificate): Removed hashing.
* packet.h (public_cert): Removed hash variable.
* free-packet.c (copy_public_cert, free_public_cert): Likewise.
* sig-check.c (check_key_signatures): Changed semantics.
Wed Feb 18 12:11:28 1998 Werner Koch (wk@isil.d.shuttle.de)
* trustdb.c (do_check): Add handling for revocation certificates.
(build_sigrecs): Ditto.
(check_sigs): Ditto.
Wed Feb 18 09:31:04 1998 Werner Koch (wk@isil.d.shuttle.de)
* armor.c (armor_filter): Add afx->hdrlines.
* revoke.c (gen_revoke): Add comment line.
* dearmor.c (enarmor_file): Ditto.
* sig-check.c (check_key_signature): Add handling for class 0x20.
* mainproc.c : Ditto.
Tue Feb 17 21:24:17 1998 Werner Koch (wk@isil.d.shuttle.de)
* armor.c : Add header lines "...ARMORED FILE .."
* dearmor.c (enarmor_file): New.
* g10maint.c (main): New option "--enarmor"
Tue Feb 17 19:03:33 1998 Werner Koch (wk@isil.d.shuttle.de)
* mainproc.c : Changed a lot, because the packets are now stored
a simple linlked list and not anymore in a complicatd tree structure.
Tue Feb 17 10:14:48 1998 Werner Koch (wk@isil.d.shuttle.de)
* free_packet.c (cmp_public_certs): New.
(cmp_user_ids): New.
* kbnode.c (clone_kbnode): New.
(release_kbnode): Add clone support.
* ringedit.c (find_keyblock_bypkc): New.
* sign.c (remove_keysigs): Self signatures are now skipped,
changed arguments and all callers.
* import.c : Add functionality.
Tue Feb 17 09:31:40 1998 Werner Koch (wk@isil.d.shuttle.de)
* options.h (homedir): New option.
* g10.c, g10maint.c, getkey.c, keygen.c, trustdb.c (opt.homedir): New.
* trustdb.c (init_trustdb): mkdir for hoem directory
(sign_private_data): Renamed "sig" to "g10.sig"
Mon Feb 16 20:02:03 1998 Werner Koch (wk@isil.d.shuttle.de)
* kbnode.c (commit_kbnode): New.
(delete_kbnode): removed unused first arg. Changed all Callers.
* ringedit.c (keyblock_resource_name): New.
(get_keyblock_handle): NULL for filename returns default resource.
Mon Feb 16 19:38:48 1998 Werner Koch (wk@isil.d.shuttle.de)
* sig-check.s (check_key_signature): Now uses the supplied
public key to check the signature and not any more the one
from the getkey.c
(do_check): New.
(check_signature): Most work moved to do_check.
Mon Feb 16 14:48:57 1998 Werner Koch (wk@isil.d.shuttle.de)
* armor.c (find_header): Fixed another bug.
Mon Feb 16 12:18:34 1998 Werner Koch (wk@isil.d.shuttle.de)
* getkey.c (scan_keyring): Add handling of compressed keyrings.
Mon Feb 16 10:44:51 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c, g10maint.c (strusage): Rewrote.
(build_list): New
Mon Feb 16 08:58:41 1998 Werner Koch (wk@isil.d.shuttle.de)
* armor.c (use_armor): New.
Sat Feb 14 14:30:57 1998 Werner Koch (wk@isil.d.shuttle.de)
* mainproc.c (proc_tree): Sigclass fix.
Sat Feb 14 14:16:33 1998 Werner Koch (wk@isil.d.shuttle.de)
* armor.c (armor_filter): Changed version and comment string.
* encode.c, sign.c, keygen.c: Changed all comment packet strings.
Sat Feb 14 12:39:24 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (aGenRevoke): New command.
* revoke.c: New.
* sign.c (make_keysig_packet): Add support for sigclass 0x20.
Fri Feb 13 20:18:14 1998 Werner Koch (wk@isil.d.shuttle.de)
* ringedit.c (enum_keyblocks, keyring_enum): New.
Fri Feb 13 19:33:40 1998 Werner Koch (wk@isil.d.shuttle.de)
* export.c: Add functionality.
* keygen.c (generate_keypair): Moved the leading comment behind the
key packet.
* kbnode.c (walk_kbnode): Fixed.
* g10.c (main): listing armored keys now work.
Fri Feb 13 16:17:43 1998 Werner Koch (wk@isil.d.shuttle.de)
* parse-packet.c (parse_publickey, parse_signature): Fixed calls
to mpi_read used for ELG b.
Fri Feb 13 15:13:23 1998 Werner Koch (wk@isil.d.shuttle.de)
* g10.c (main): changed formatting of help output.
Thu Feb 12 22:24:42 1998 Werner Koch (wk@frodo)
* pubkey-enc.c (get_session_key): rewritten
diff --git a/g10/keylist.c b/g10/keylist.c
index 1462dbb2f..25b8196bd 100644
--- a/g10/keylist.c
+++ b/g10/keylist.c
@@ -1,431 +1,435 @@
/* keylist.c
* Copyright (C) 1998 Free Software Foundation, Inc.
*
* This file is part of GnuPG.
*
* GnuPG is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* GnuPG is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
*/
#include <config.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <assert.h>
#include "options.h"
#include "packet.h"
#include "errors.h"
#include "keydb.h"
#include "memory.h"
#include "util.h"
#include "trustdb.h"
#include "main.h"
#include "i18n.h"
static void list_all(int);
static void list_one( STRLIST names, int secret);
static void list_keyblock( KBNODE keyblock, int secret );
static void fingerprint( PKT_public_key *pk, PKT_secret_key *sk );
/****************
* List the keys
* If NNAMES is 0; all available keys are listed
*/
void
public_key_list( int nnames, char **names )
{
if( !nnames )
list_all(0);
else { /* List by user id */
STRLIST list = NULL;
for( ; nnames ; nnames--, names++ )
add_to_strlist( &list, *names );
list_one( list, 0 );
free_strlist( list );
}
}
void
secret_key_list( int nnames, char **names )
{
if( !nnames )
list_all(1);
else { /* List by user id */
STRLIST list = NULL;
for( ; nnames ; nnames--, names++ )
add_to_strlist( &list, *names );
list_one( list, 1 );
free_strlist( list );
}
}
static void
list_all( int secret )
{
KBPOS kbpos;
KBNODE keyblock = NULL;
int rc=0;
int lastresno;
rc = enum_keyblocks( secret? 5:0, &kbpos, &keyblock );
if( rc ) {
if( rc != -1 )
log_error("enum_keyblocks(open) failed: %s\n", g10_errstr(rc) );
goto leave;
}
lastresno = -1;
while( !(rc = enum_keyblocks( 1, &kbpos, &keyblock )) ) {
if( lastresno != kbpos.resno ) {
const char *s = keyblock_resource_name( &kbpos );
int i;
lastresno = kbpos.resno;
printf("%s\n", s );
for(i=strlen(s); i; i-- )
putchar('-');
putchar('\n');
}
merge_keys_and_selfsig( keyblock );
list_keyblock( keyblock, secret );
release_kbnode( keyblock ); keyblock = NULL;
}
if( rc && rc != -1 )
log_error("enum_keyblocks(read) failed: %s\n", g10_errstr(rc));
leave:
enum_keyblocks( 2, &kbpos, &keyblock ); /* close */
release_kbnode( keyblock );
}
static void
list_one( STRLIST names, int secret )
{
int rc = 0;
KBNODE keyblock = NULL;
GETKEY_CTX ctx;
if( secret ) {
rc = get_seckey_bynames( &ctx, NULL, names, &keyblock );
if( rc ) {
log_error("error reading key: %s\n", g10_errstr(rc) );
get_seckey_end( ctx );
return;
}
do {
merge_keys_and_selfsig( keyblock );
list_keyblock( keyblock, 1 );
release_kbnode( keyblock );
} while( !get_seckey_next( ctx, NULL, &keyblock ) );
get_seckey_end( ctx );
}
else {
rc = get_pubkey_bynames( &ctx, NULL, names, &keyblock );
if( rc ) {
log_error("error reading key: %s\n", g10_errstr(rc) );
get_pubkey_end( ctx );
return;
}
do {
list_keyblock( keyblock, 0 );
release_kbnode( keyblock );
} while( !get_pubkey_next( ctx, NULL, &keyblock ) );
get_pubkey_end( ctx );
}
}
static void
list_keyblock( KBNODE keyblock, int secret )
{
int rc = 0;
KBNODE kbctx;
KBNODE node;
PKT_public_key *pk;
PKT_secret_key *sk;
u32 keyid[2];
int any=0;
int trustletter = 0;
/* get the keyid from the keyblock */
node = find_kbnode( keyblock, secret? PKT_SECRET_KEY : PKT_PUBLIC_KEY );
if( !node ) {
log_error("Oops; key lost!\n");
dump_kbnode( keyblock );
return;
}
if( secret ) {
pk = NULL;
sk = node->pkt->pkt.secret_key;
keyid_from_sk( sk, keyid );
if( opt.with_colons )
- printf("sec::%u:%d:%08lX%08lX:%s:%s:::",
+ printf("sec:u:%u:%d:%08lX%08lX:%s:%s:::",
nbits_from_sk( sk ),
sk->pubkey_algo,
(ulong)keyid[0],(ulong)keyid[1],
datestr_from_sk( sk ),
sk->expiredate? strtimestamp(sk->expiredate):""
/* fixme: add LID here */ );
else
printf("sec %4u%c/%08lX %s ", nbits_from_sk( sk ),
pubkey_letter( sk->pubkey_algo ),
(ulong)keyid[1],
datestr_from_sk( sk ) );
}
else {
pk = node->pkt->pkt.public_key;
sk = NULL;
keyid_from_pk( pk, keyid );
if( opt.with_colons ) {
trustletter = query_trust_info( pk, NULL );
printf("pub:%c:%u:%d:%08lX%08lX:%s:%s:",
trustletter,
nbits_from_pk( pk ),
pk->pubkey_algo,
(ulong)keyid[0],(ulong)keyid[1],
datestr_from_pk( pk ),
pk->expiredate? strtimestamp(pk->expiredate):""
);
if( pk->local_id )
printf("%lu", pk->local_id );
putchar(':');
if( pk->local_id )
putchar( get_ownertrust_info( pk->local_id ) );
putchar(':');
}
else
printf("pub %4u%c/%08lX %s ", nbits_from_pk( pk ),
pubkey_letter( pk->pubkey_algo ),
(ulong)keyid[1],
datestr_from_pk( pk ) );
}
for( kbctx=NULL; (node=walk_kbnode( keyblock, &kbctx, 0)) ; ) {
if( node->pkt->pkttype == PKT_USER_ID ) {
if( any ) {
if( opt.with_colons ) {
byte namehash[20];
- rmd160_hash_buffer( namehash,
+ if( pk ) {
+ rmd160_hash_buffer( namehash,
node->pkt->pkt.user_id->name,
node->pkt->pkt.user_id->len );
- trustletter = query_trust_info( pk, namehash );
+ trustletter = query_trust_info( pk, namehash );
+ }
+ else
+ trustletter = 'u';
printf("uid:%c::::::::", trustletter);
}
else
printf("uid%*s", 28, "");
}
print_string( stdout, node->pkt->pkt.user_id->name,
node->pkt->pkt.user_id->len, opt.with_colons );
if( opt.with_colons )
putchar(':');
putchar('\n');
if( !any ) {
if( opt.fingerprint )
fingerprint( pk, sk );
any = 1;
}
}
else if( node->pkt->pkttype == PKT_PUBLIC_SUBKEY ) {
u32 keyid2[2];
PKT_public_key *pk2 = node->pkt->pkt.public_key;
if( !any ) {
putchar('\n');
if( opt.fingerprint )
fingerprint( pk, sk ); /* of the main key */
any = 1;
}
keyid_from_pk( pk2, keyid2 );
if( opt.with_colons ) {
printf("sub:%c:%u:%d:%08lX%08lX:%s:%s:",
trustletter,
nbits_from_pk( pk2 ),
pk2->pubkey_algo,
(ulong)keyid2[0],(ulong)keyid2[1],
datestr_from_pk( pk2 ),
pk2->expiredate? strtimestamp(pk2->expiredate):""
/* fixme: add LID and ownertrust here */
);
if( pk->local_id ) /* use the local_id of the main key??? */
printf("%lu", pk->local_id );
putchar(':');
putchar(':');
putchar('\n');
}
else
printf("sub %4u%c/%08lX %s\n", nbits_from_pk( pk2 ),
pubkey_letter( pk2->pubkey_algo ),
(ulong)keyid2[1],
datestr_from_pk( pk2 ) );
if( opt.fingerprint > 1 )
fingerprint( pk2, NULL );
}
else if( node->pkt->pkttype == PKT_SECRET_SUBKEY ) {
u32 keyid2[2];
PKT_secret_key *sk2 = node->pkt->pkt.secret_key;
if( !any ) {
putchar('\n');
if( opt.fingerprint )
fingerprint( pk, sk ); /* of the main key */
any = 1;
}
keyid_from_sk( sk2, keyid2 );
if( opt.with_colons )
printf("ssb::%u:%d:%08lX%08lX:%s:%s:::\n",
nbits_from_sk( sk2 ),
sk2->pubkey_algo,
(ulong)keyid2[0],(ulong)keyid2[1],
datestr_from_sk( sk2 ),
sk2->expiredate? strtimestamp(sk2->expiredate):""
/* fixme: add LID */
);
else
printf("ssb %4u%c/%08lX %s\n", nbits_from_sk( sk2 ),
pubkey_letter( sk2->pubkey_algo ),
(ulong)keyid2[1],
datestr_from_sk( sk2 ) );
if( opt.fingerprint > 1 )
fingerprint( NULL, sk2 );
}
else if( opt.list_sigs && node->pkt->pkttype == PKT_SIGNATURE ) {
PKT_signature *sig = node->pkt->pkt.signature;
int sigrc;
if( !any ) { /* no user id, (maybe a revocation follows)*/
if( sig->sig_class == 0x20 )
puts("[revoked]");
else if( sig->sig_class == 0x18 )
puts("[key binding]");
else
putchar('\n');
if( opt.fingerprint )
fingerprint( pk, sk );
any=1;
}
if( sig->sig_class == 0x20 || sig->sig_class == 0x30 )
fputs("rev", stdout);
else if( (sig->sig_class&~3) == 0x10 )
fputs("sig", stdout);
else if( sig->sig_class == 0x18 )
fputs("sig", stdout);
else {
if( opt.with_colons )
printf("sig::::::::::%02x:\n",sig->sig_class );
else
printf("sig "
"[unexpected signature class 0x%02x]\n",sig->sig_class );
continue;
}
if( opt.check_sigs ) {
fflush(stdout);
rc = check_key_signature( keyblock, node, NULL );
switch( rc ) {
case 0: sigrc = '!'; break;
case G10ERR_BAD_SIGN: sigrc = '-'; break;
case G10ERR_NO_PUBKEY: sigrc = '?'; break;
default: sigrc = '%'; break;
}
}
else {
rc = 0;
sigrc = ' ';
}
if( opt.with_colons ) {
putchar(':');
if( sigrc != ' ' )
putchar(sigrc);
printf(":::%08lX%08lX:%s::::", (ulong)sig->keyid[0],
(ulong)sig->keyid[1], datestr_from_sig(sig));
}
else
printf("%c %08lX %s ",
sigrc, (ulong)sig->keyid[1], datestr_from_sig(sig));
if( sigrc == '%' )
printf("[%s] ", g10_errstr(rc) );
else if( sigrc == '?' )
;
else {
size_t n;
char *p = get_user_id( sig->keyid, &n );
print_string( stdout, p, n, opt.with_colons );
m_free(p);
}
if( opt.with_colons )
printf(":%02x:", sig->sig_class );
putchar('\n');
/* FIXME: check or list other sigs here (subpkt PRIV_ADD_SIG)*/
}
}
if( !any ) {/* oops, no user id */
if( opt.with_colons )
putchar(':');
putchar('\n');
}
else if( !opt.with_colons )
putchar('\n'); /* separator line */
}
static void
fingerprint( PKT_public_key *pk, PKT_secret_key *sk )
{
byte *array, *p;
size_t i, n;
p = array = pk? fingerprint_from_pk( pk, NULL, &n )
: fingerprint_from_sk( sk, NULL, &n );
if( opt.with_colons ) {
printf("fpr:::::::::");
for(i=0; i < n ; i++, p++ )
printf("%02X", *p );
putchar(':');
}
else {
printf(" Key fingerprint =");
if( n == 20 ) {
for(i=0; i < n ; i++, i++, p += 2 ) {
if( i == 10 )
putchar(' ');
printf(" %02X%02X", *p, p[1] );
}
}
else {
for(i=0; i < n ; i++, p++ ) {
if( i && !(i%8) )
putchar(' ');
printf(" %02X", *p );
}
}
}
putchar('\n');
m_free(array);
}
diff --git a/po/de.po b/po/de.po
index 08b96e6c9..2856d5972 100644
--- a/po/de.po
+++ b/po/de.po
@@ -1,3457 +1,3445 @@
# GnuPG german translation
# Copyright (C) 1998 Free Software Foundation, Inc.
# Walter Koch <walterk@dip.de>, 1998.
-#
msgid ""
msgstr ""
-"POT-Creation-Date: 1999-03-08 20:45+0100\n"
-"PO-Revision-Date: 1999-02-21 13:34+0100\n"
+"POT-Creation-Date: 1999-02-19 15:31+0100\n"
+"PO-Revision-Date: 1999-03-08 13:34+0100\n"
"Last-Translator: Walter Koch <walterk@mail.dip.de>\n"
"Language-Team: German <de@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=iso-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
"Date: 1998-01-26 22:08:36+0100\n"
"From: Werner Koch <wk@frodo>\n"
"Xgettext-Options: --default-domain=gnupg --directory=.. --add-comments "
"--keyword=_ --keyword=N_ --files-from=./POTFILES.in\n"
"Files: util/secmem.c util/argparse.c cipher/random.c cipher/rand-dummy.c "
"cipher/rand-unix.c cipher/rand-w32.c g10/g10.c g10/pkclist.c g10/keygen.c "
"g10/decrypt.c g10/encode.c g10/import.c g10/keyedit.c g10/keylist.c "
"g10/mainproc.c g10/passphrase.c g10/plaintext.c g10/pref.c g10/seckey-cert.c "
"g10/sig-check.c g10/sign.c g10/trustdb.c g10/verify.c\n"
-#: util/secmem.c:76
+#: util/secmem.c:77
msgid "Warning: using insecure memory!\n"
msgstr ""
"Warnung: Sensible Daten könnten auf Platte ausgelagert werden.\n"
-" Um dies zu vermeiden, kann das Programm suid(root) installiert werden.\n"
-" Bitte wenden Sie sich hierzu an den Systemadministrator.\n"
+#" Um dies zu vermeiden, kann das Programm suid(root) installiert werden.\n"
+#" Bitte wenden Sie sich hierzu an den Systemadministrator.\n"
-#: util/secmem.c:249
+#: util/secmem.c:250
msgid "operation is not possible without initialized secure memory\n"
-msgstr "Vorgang ist ohne sicheren Hauptspeichern nicht möglich\n"
+msgstr "Vorgang ist ohne sicheren Hauptspeicher nicht möglich\n"
-#: util/secmem.c:250
+#: util/secmem.c:251
msgid "(you may have used the wrong program for this task)\n"
-msgstr ""
-"(möglicherweise haben Sie das falsche Programm für diese Aufgabe benutzt)\n"
+msgstr "(möglicherweise haben Sie das falsche Programm für diese Aufgabe benutzt)\n"
#: util/miscutil.c:143
msgid "yes"
msgstr "ja"
#: util/miscutil.c:144
msgid "yY"
msgstr "jJyY"
#: util/errors.c:54
msgid "general error"
msgstr "Allgemeiner Fehler"
#: util/errors.c:55
msgid "unknown packet type"
msgstr "Unbekannter Pakettyp"
#: util/errors.c:56
msgid "unknown version"
msgstr "Unbekannte Version"
#: util/errors.c:57
msgid "unknown pubkey algorithm"
msgstr "Unbekanntes Public-Key Verfahren"
#: util/errors.c:58
msgid "unknown digest algorithm"
msgstr "Unbekanntes Hashverfahren"
#: util/errors.c:59
msgid "bad public key"
msgstr "Falscher öffentlicher Schüssel"
#: util/errors.c:60
msgid "bad secret key"
msgstr "Falscher geheimer Schlüssel"
#: util/errors.c:61
msgid "bad signature"
msgstr "Falsche Unterschrift"
#: util/errors.c:62
msgid "checksum error"
msgstr "Prüfsummen-Fehler"
#: util/errors.c:63
msgid "bad passphrase"
msgstr "Falsches Mantra"
#: util/errors.c:64
msgid "public key not found"
msgstr "Öffentlicher Schlüssel nicht gefunden"
#: util/errors.c:65
msgid "unknown cipher algorithm"
msgstr "Unbekanntes Verschlüsselungsverfahren"
#: util/errors.c:66
msgid "can't open the keyring"
msgstr "Der Schlüsselbund kann nicht geöffnet werden"
#: util/errors.c:67
msgid "invalid packet"
msgstr "Ungültiges Paket"
#: util/errors.c:68
msgid "invalid armor"
msgstr "Ungültige ASCII-Hülle"
#: util/errors.c:69
msgid "no such user id"
msgstr "Keine solche User-ID"
#: util/errors.c:70
msgid "secret key not available"
msgstr "Geheimer Schlüssel ist nicht vorhanden"
#: util/errors.c:71
msgid "wrong secret key used"
msgstr "Falscher geheimer Schlüssel benutzt"
#: util/errors.c:72
msgid "not supported"
msgstr "Wird nicht unterstützt"
#: util/errors.c:73
msgid "bad key"
msgstr "Falscher Schlüssel"
#: util/errors.c:74
msgid "file read error"
msgstr "Dateilesefehler"
#: util/errors.c:75
msgid "file write error"
msgstr "Dateischreibfehler"
#: util/errors.c:76
msgid "unknown compress algorithm"
msgstr "Unbekanntes Komprimierverfahren"
#: util/errors.c:77
msgid "file open error"
msgstr "Fehler beim Öffnen der Datei"
#: util/errors.c:78
msgid "file create error"
msgstr "Fehler beim Erzeugen der Datei"
#: util/errors.c:79
msgid "invalid passphrase"
msgstr "Ungültiges Mantra"
#: util/errors.c:80
msgid "unimplemented pubkey algorithm"
msgstr "Öffentliches Schlüsselverfahren ist nicht implementiert."
#: util/errors.c:81
msgid "unimplemented cipher algorithm"
msgstr "Verschlüsselungsverfahren ist nicht implementiert"
#: util/errors.c:82
msgid "unknown signature class"
msgstr "Unbekannte Unterschriftenklasse"
#: util/errors.c:83
msgid "trust database error"
msgstr "Fehler in der Trust-DB"
#: util/errors.c:84
msgid "bad MPI"
msgstr "Falsche MPI"
#: util/errors.c:85
msgid "resource limit"
msgstr "festdefinierte Resourcenobergrenze erreicht"
#: util/errors.c:86
msgid "invalid keyring"
msgstr "Ungültiger Schlüsselbund"
#: util/errors.c:87
msgid "bad certificate"
msgstr "Falsches Zertifikat"
#: util/errors.c:88
msgid "malformed user id"
msgstr "Ungünstig aufgebaute User-ID"
#: util/errors.c:89
msgid "file close error"
msgstr "Fehler beim Schließen der Datei"
#: util/errors.c:90
msgid "file rename error"
msgstr "Fehler beim Umbenennen einer Datei"
#: util/errors.c:91
msgid "file delete error"
msgstr "Fehler beim Löschen einer Datei"
#: util/errors.c:92
msgid "unexpected data"
msgstr "Unerwartete Daten"
#: util/errors.c:93
msgid "timestamp conflict"
msgstr "Zeitangaben differieren"
#: util/errors.c:94
msgid "unusable pubkey algorithm"
msgstr "Unbenutzbares öffentliches Schlüsselverfahren"
#: util/errors.c:95
msgid "file exists"
msgstr "Datei existiert bereits"
#: util/errors.c:96
msgid "weak key"
msgstr "Unsicherer Schlüssel"
#: util/errors.c:97
msgid "invalid argument"
msgstr "Ungültiges Argument"
#: util/errors.c:98
msgid "bad URI"
msgstr "fehlerhafter URI"
#: util/errors.c:99
msgid "unsupported URI"
msgstr "Nicht unterstützter URI"
#: util/errors.c:100
msgid "network error"
msgstr "Netzwerkfehler"
#: util/logger.c:178
#, c-format
msgid "... this is a bug (%s:%d:%s)\n"
msgstr "... dies ist ein Bug (Programmfehler) (%s:%d:%s)\n"
#: util/logger.c:184
#, c-format
msgid "you found a bug ... (%s:%d)\n"
msgstr "Sie haben eine Bug (Programmfehler) gefunden ... (%s:%d)\n"
#: cipher/random.c:403
msgid "WARNING: using insecure random number generator!!\n"
msgstr ""
"WARNUNG: Der Zufallszahlengenerator erzeugt keine echten Zufallszahlen!\n"
#: cipher/random.c:404
msgid ""
"The random number generator is only a kludge to let\n"
"it run - it is in no way a strong RNG!\n"
"\n"
"DON'T USE ANY DATA GENERATED BY THIS PROGRAM!!\n"
"\n"
msgstr ""
"Der Zufallszahlengenerator (RNG) ist lediglich ein \"kludge\", damit das\n"
"Programms überhaupt läuft - es ist KEINESFALLS ein starker RNG!\n"
"\n"
"BENUTZEN SIE DIE DURCH DIESES PROGRAMM ERZEUGTEN DATEN NICHT!\n"
"\n"
-#: cipher/rndlinux.c:114
+#: cipher/rndlinux.c:118
#, c-format
msgid ""
"\n"
"Not enough random bytes available. Please do some other work to give\n"
"the OS a chance to collect more entropy! (Need %d more bytes)\n"
msgstr ""
"\n"
"Es sind nicht genügend Zufallswerte vorhanden. Bitte führen Sie andere\n"
"Arbeiten durch, damit das Betriebssystem weitere Entropie sammeln kann!\n"
"(Es werden noch %d Byte benötigt.)\n"
#: g10/g10.c:166
msgid ""
"@Commands:\n"
" "
msgstr ""
"@Befehle:\n"
" "
#: g10/g10.c:169
msgid "|[file]|make a signature"
msgstr "|[file]|Eine Unterschrift erzeugen"
#: g10/g10.c:170
msgid "|[file]|make a clear text signature"
msgstr "|[file]|Eine Klartextunterschrift erzeugen"
#: g10/g10.c:171
msgid "make a detached signature"
msgstr "Eine abgetrennte Unterschrift erzeugen"
#: g10/g10.c:172
msgid "encrypt data"
msgstr "Daten verschlüsseln"
#: g10/g10.c:173
msgid "encryption only with symmetric cipher"
-msgstr "Daten nur symmetrisch verschlüsseln"
+msgstr "Daten symmetrisch verschlüsseln"
#: g10/g10.c:174
msgid "store only"
msgstr "Nur speichern"
#: g10/g10.c:175
msgid "decrypt data (default)"
-msgstr "Daten entschlüsseln (Voreinstellung)"
+msgstr "Daten entschlüsseln (Voreinstellung)"
#: g10/g10.c:176
msgid "verify a signature"
msgstr "Signatur prüfen"
#: g10/g10.c:178
msgid "list keys"
msgstr "Liste der Schlüssel"
#: g10/g10.c:179
msgid "list keys and signatures"
msgstr "Liste der Schlüssel und ihrer Signaturen"
#: g10/g10.c:180
msgid "check key signatures"
msgstr "Signaturen der Schlüssel prüfen"
#: g10/g10.c:181
msgid "list keys and fingerprints"
msgstr "Liste der Schlüssel und ihrer \"Fingerabdrücke\""
#: g10/g10.c:182
msgid "list secret keys"
msgstr "Liste der geheimen Schlüssel"
#: g10/g10.c:184
msgid "generate a new key pair"
msgstr "Ein neues Schlüsselpaar erzeugen"
#: g10/g10.c:186
msgid "remove key from the public keyring"
msgstr "Schlüssel entfernen"
#: g10/g10.c:188
msgid "sign or edit a key"
msgstr "Unterschreiben oder Bearbeiten eines Schlüssels"
#: g10/g10.c:189
msgid "generate a revocation certificate"
msgstr "Ein Schlüsselwiderruf-Zertifikat erzeugen"
#: g10/g10.c:191
msgid "export keys"
msgstr "Schlüssel exportieren"
#: g10/g10.c:192
msgid "export keys to a key server"
-msgstr ""
+msgstr "Schlüssel zu einem Schlüsselserver exportieren"
#: g10/g10.c:195
msgid "import/merge keys"
msgstr "Schlüssel importieren/kombinieren"
#: g10/g10.c:197
msgid "list only the sequence of packets"
msgstr "Lediglich die Struktur der Datenpakete anzeigen"
#: g10/g10.c:200
msgid "export the ownertrust values"
msgstr "Exportieren der \"Owner trust\" Werte"
#: g10/g10.c:202
msgid "import ownertrust values"
msgstr "Importieren der \"Owner trust\" Werte"
#: g10/g10.c:204
msgid "|[NAMES]|update the trust database"
msgstr "|[NAMES]|Ändern der \"Trust\"-Datenbank"
#: g10/g10.c:206
msgid "|[NAMES]|check the trust database"
msgstr "|[NAMES]|Überprüfen der \"Trust\"-Datenbank"
#: g10/g10.c:207
msgid "fix a corrupted trust database"
msgstr "Reparieren einer beschädigten \"Trust\"-Datenbank"
#: g10/g10.c:208
msgid "De-Armor a file or stdin"
msgstr "Datei oder stdin von der ASCII-Hülle befreien"
#: g10/g10.c:209
msgid "En-Armor a file or stdin"
msgstr "Datei oder stdin in eine ASCII-Hülle einpacken"
#: g10/g10.c:210
msgid "|algo [files]|print message digests"
msgstr "|algo [files]|Message-Digests für die Dateien ausgeben"
#: g10/g10.c:211
msgid "print all message digests"
msgstr "Message-Digests für die Eingabedaten ausgeben"
#: g10/g10.c:218
msgid ""
"@\n"
"Options:\n"
" "
msgstr ""
"@\n"
"Optionen:\n"
" "
#: g10/g10.c:220
msgid "create ascii armored output"
msgstr "Ausgabe mit ASCII-Hülle versehen"
#: g10/g10.c:221
msgid "|NAME|encrypt for NAME"
msgstr "|NAME|verschlüsseln für NAME"
#: g10/g10.c:226
msgid "use this user-id to sign or decrypt"
msgstr "Mit dieser User-ID signieren"
#: g10/g10.c:227
msgid "|N|set compress level N (0 disables)"
msgstr "Kompressionsstufe auf N setzen (0 = keine Kompr.)"
#: g10/g10.c:229
msgid "use canonical text mode"
msgstr "Textmodus benutzen"
#: g10/g10.c:231
msgid "use as output file"
msgstr "Als Ausgabedatei benutzen"
#: g10/g10.c:232
msgid "verbose"
msgstr "Detaillierte Informationen"
#: g10/g10.c:233
msgid "be somewhat more quiet"
msgstr "Etwas weniger Infos"
#: g10/g10.c:234
msgid "force v3 signatures"
msgstr "v3 Signaturen erzwingen"
-#: g10/g10.c:235
-msgid "do not make any changes"
-msgstr "Keine wirklichen Änderungen durchführen"
-
+#. { oDryRun, "dry-run", 0, N_("do not make any changes") },
#: g10/g10.c:236
msgid "batch mode: never ask"
msgstr "Stapelmodus: Keine Abfragen"
#: g10/g10.c:237
msgid "assume yes on most questions"
msgstr "\"Ja\" als Standardantwort annehmen"
#: g10/g10.c:238
msgid "assume no on most questions"
msgstr "\"Nein\" als Standardantwort annehmen"
#: g10/g10.c:239
msgid "add this keyring to the list of keyrings"
msgstr "Als öffentlichen Schlüsselbund mitbenutzen"
#: g10/g10.c:240
msgid "add this secret keyring to the list"
msgstr "Als geheimen Schlüsselbund mitbenutzen"
#: g10/g10.c:241
msgid "|NAME|use NAME as default secret key"
msgstr "|NAME|NAME als voreingestellten Schlüssel benutzen"
#: g10/g10.c:242
msgid "|HOST|use this keyserver to lookup keys"
-msgstr ""
+msgstr "|HOST|diesen Schlüsselserver zur Suche verwenden"
#: g10/g10.c:243
msgid "|NAME|set terminal charset to NAME"
msgstr "|NAME|Terminalzeichensatz NAME benutzen"
#: g10/g10.c:244
msgid "read options from file"
msgstr "Optionen aus der Datei lesen"
#: g10/g10.c:246
msgid "set debugging flags"
msgstr "Debug-Flags einschalten"
#: g10/g10.c:247
msgid "enable full debugging"
msgstr "Alle Debug-Flags einschalten"
#: g10/g10.c:248
msgid "|FD|write status info to this FD"
msgstr "|FD|Statusinfo auf FD (Dateihandle) ausgeben"
#: g10/g10.c:249
msgid "do not write comment packets"
msgstr "Keine Kommentarpakete schreiben"
#: g10/g10.c:250
msgid "(default is 1)"
msgstr "Benötigte Vollvertrauen (Voreinstellung 1)"
#: g10/g10.c:251
msgid "(default is 3)"
msgstr "Benötigte Teilvertrauen (Voreinstellung 3)"
#: g10/g10.c:253
msgid "|KEYID|ulimately trust this key"
msgstr "|KEYID|Diesem Schlüssel uneingeschränkt vertrauen"
#: g10/g10.c:254
msgid "|FILE|load extension module FILE"
msgstr "|FILE|Erweiterungsmodul DATEI laden"
#: g10/g10.c:255
msgid "emulate the mode described in RFC1991"
msgstr "Den in RFC1991 beschriebenen Modus nachahmen"
#: g10/g10.c:256
msgid "|N|use passphrase mode N"
msgstr "|N|Verwenden des Mantra-Modus N"
#: g10/g10.c:258
msgid "|NAME|use message digest algorithm NAME for passphrases"
msgstr "|NAME|Das Hashverfahren NAME für Mantras benutzen"
#: g10/g10.c:260
msgid "|NAME|use cipher algorithm NAME for passphrases"
msgstr "|NAME|Das Verschlü.verfahren NAME für Mantras benutzen"
#: g10/g10.c:262
msgid "|NAME|use cipher algorithm NAME"
msgstr "|NAME|Das Verschlü.verfahren NAME benutzen"
#: g10/g10.c:263
msgid "|NAME|use message digest algorithm NAME"
msgstr "|NAME|Das Hashverfahren NAME benutzen"
#: g10/g10.c:264
msgid "|N|use compress algorithm N"
msgstr "|N|Die Komprimierverfahren N benutzen"
#: g10/g10.c:265
msgid "throw keyid field of encrypted packets"
msgstr "entferne die Absender-ID verschlüsselter Pakete"
#: g10/g10.c:273
msgid ""
"@\n"
"Examples:\n"
"\n"
" -se -r Bob [file] sign and encrypt for user Bob\n"
" --clearsign [file] make a clear text signature\n"
" --detach-sign [file] make a detached signature\n"
" --list-keys [names] show keys\n"
" --fingerprint [names] show fingerprints\n"
msgstr ""
"@\n"
"Beispiele:\n"
"\n"
" -se -r Bob [Datei] Signieren und verschlüsseln für Benutzer Bob\n"
" --clearsign [Datei] Eine Klartextsignatur erzeugen\n"
" --detach-sign [Datei] Eine abgetrennte Signatur erzeugen\n"
" --list-keys [Namen] Schlüssel anzeigen\n"
" --fingerprint [Namen] \"Fingerabdrücke\" anzeigen\n"
#: g10/g10.c:353
msgid "Please report bugs to <gnupg-bugs@gnu.org>.\n"
msgstr "Berichte über Bugs (Programmfehler) bitte an <gnupg-bugs@gnu.org>.\n"
#: g10/g10.c:358
msgid "Usage: gpgm [options] [files] (-h for help)"
msgstr "Syntax: gpgm [Optionen] [Dateien] (-h für Hilfe)"
#: g10/g10.c:360
msgid "Usage: gpg [options] [files] (-h for help)"
msgstr "Aufruf: gpg [Optionen] [Dateien] (-h für Hilfe)"
#: g10/g10.c:365
msgid ""
"Syntax: gpgm [options] [files]\n"
"GnuPG maintenance utility\n"
msgstr ""
"Syntax: gpgm [options] [files]\n"
"GnuPG Wartungs-Hilfsprogramm\n"
#: g10/g10.c:368
msgid ""
"Syntax: gpg [options] [files]\n"
"sign, check, encrypt or decrypt\n"
"default operation depends on the input data\n"
msgstr ""
"Aufruf: gpg [Optionen] [Dateien]\n"
"Signieren, prüfen, verschlüsseln, entschlüsseln\n"
"Die voreingestellte Operation ist abhängig von den Eingabedaten\n"
#: g10/g10.c:374
msgid ""
"\n"
"Supported algorithms:\n"
msgstr ""
"\n"
"Unterstützte Verfahren:\n"
#: g10/g10.c:449
msgid "usage: gpgm [options] "
msgstr "Aufruf: gpgm [Optionen] "
#: g10/g10.c:451
msgid "usage: gpg [options] "
msgstr "Aufruf: gpg [Optionen] "
#: g10/g10.c:492
msgid "conflicting commands\n"
msgstr "Widersprüchliche Befehle\n"
#: g10/g10.c:631
#, c-format
msgid "NOTE: no default option file `%s'\n"
msgstr "Hinweis: Keine voreingestellte Optionendatei '%s' vorhanden\n"
#: g10/g10.c:635
#, c-format
msgid "option file `%s': %s\n"
msgstr "Optionendatei '%s': %s\n"
#: g10/g10.c:642
#, c-format
msgid "reading options from `%s'\n"
msgstr "Optionen werden aus '%s' gelesen\n"
-#: g10/g10.c:797
+#: g10/g10.c:796
#, c-format
msgid "%s is not a valid character set\n"
msgstr "%s ist kein gültiger Zeichensatz.\n"
-#: g10/g10.c:837 g10/g10.c:849
+#: g10/g10.c:836 g10/g10.c:848
msgid "selected cipher algorithm is invalid\n"
msgstr "Das ausgewählte Verschlüsslungsverfahren ist ungültig\n"
-#: g10/g10.c:843 g10/g10.c:855
+#: g10/g10.c:842 g10/g10.c:854
msgid "selected digest algorithm is invalid\n"
msgstr "Das ausgewählte Hashverfahren ist ungültig\n"
-#: g10/g10.c:858
+#: g10/g10.c:857
#, c-format
msgid "compress algorithm must be in range %d..%d\n"
msgstr "Das Komprimierverfahren muß im Bereich %d bis %d liegen\n"
-#: g10/g10.c:860
+#: g10/g10.c:859
msgid "completes-needed must be greater than 0\n"
msgstr "completes-needed müssen größer als 0 sein\n"
-#: g10/g10.c:862
+#: g10/g10.c:861
msgid "marginals-needed must be greater than 1\n"
msgstr "marginals-needed müssen größer als 1 sein\n"
-#: g10/g10.c:864
+#: g10/g10.c:863
msgid "max-cert-depth must be in range 1 to 255\n"
msgstr "max-cert-depth muß im Bereich 1 bis 255 liegen\n"
-#: g10/g10.c:867
+#: g10/g10.c:866
msgid "NOTE: simple S2K mode (0) is strongly discouraged\n"
msgstr "Hinweis: Vom \"simple S2K\"-Modus (0) ist strikt abzuraten\n"
-#: g10/g10.c:871
+#: g10/g10.c:870
msgid "invalid S2K mode; must be 0, 1 or 3\n"
msgstr "ungültiger \"simple S2K\"-Modus; Wert muß 0, 1 oder 3 sein\n"
-#: g10/g10.c:948
+#: g10/g10.c:947
#, c-format
msgid "failed to initialize the TrustDB: %s\n"
msgstr "Die Trust-DB kann nicht initialisiert werden: %s\n"
-#: g10/g10.c:954
+#: g10/g10.c:953
msgid "--store [filename]"
msgstr "--store [Dateiname]"
-#: g10/g10.c:962
+#: g10/g10.c:961
msgid "--symmetric [filename]"
msgstr "--symmetric [Dateiname]"
-#: g10/g10.c:970
+#: g10/g10.c:969
msgid "--encrypt [filename]"
msgstr "--encrypt [Dateiname]"
-#: g10/g10.c:983
+#: g10/g10.c:982
msgid "--sign [filename]"
msgstr "--sign [Dateiname]"
-#: g10/g10.c:996
+#: g10/g10.c:995
msgid "--sign --encrypt [filename]"
msgstr "--sign --encrypt [Dateiname]"
-#: g10/g10.c:1010
+#: g10/g10.c:1009
msgid "--clearsign [filename]"
msgstr "--clearsign [Dateiname]"
-#: g10/g10.c:1022
+#: g10/g10.c:1021
msgid "--decrypt [filename]"
msgstr "--decrypt [Dateiname]"
-#: g10/g10.c:1031
+#: g10/g10.c:1030
msgid "--edit-key username [commands]"
msgstr "--edit-key Username [Befehle]"
-#: g10/g10.c:1047
+#: g10/g10.c:1046
msgid "--delete-secret-key username"
msgstr "--delete-secret-key Username"
-#: g10/g10.c:1050
+#: g10/g10.c:1049
msgid "--delete-key username"
msgstr "--delete-key Benutzername"
-#: g10/encode.c:222 g10/g10.c:1073 g10/sign.c:311
+#: g10/encode.c:216 g10/g10.c:1072 g10/sign.c:311
#, c-format
msgid "can't open %s: %s\n"
msgstr "'%s' kann nicht geöffnet werden: %s\n"
-#: g10/g10.c:1084
+#: g10/g10.c:1083
msgid "-k[v][v][v][c] [userid] [keyring]"
msgstr "-k[v][v][v][c] [Benutzername] [Keyring]"
-#: g10/g10.c:1145
+#: g10/g10.c:1144
#, c-format
msgid "dearmoring failed: %s\n"
msgstr "Entfernen der ASCII-Hülle ist fehlgeschlagen: %s\n"
-#: g10/g10.c:1153
+#: g10/g10.c:1152
#, c-format
msgid "enarmoring failed: %s\n"
msgstr "Anbringen der ASCII-Hülle ist fehlgeschlagen: %s\n"
-#: g10/g10.c:1219
+#: g10/g10.c:1218
#, c-format
msgid "invalid hash algorithm `%s'\n"
msgstr "Ungültiges Hashverfahren '%s'\n"
-#: g10/g10.c:1298
+#: g10/g10.c:1297
msgid "[filename]"
msgstr "[Dateiname]"
-#: g10/g10.c:1302
+#: g10/g10.c:1301
msgid "Go ahead and type your message ...\n"
msgstr "Auf geht's - Botschaft eintippen ...\n"
-#: g10/decrypt.c:59 g10/g10.c:1305 g10/verify.c:66
+#: g10/decrypt.c:59 g10/g10.c:1304 g10/verify.c:66
#, c-format
msgid "can't open `%s'\n"
msgstr "'%s' kann nicht geöffnet werden\n"
#: g10/armor.c:297
#, c-format
msgid "armor: %s\n"
msgstr "ASCII-Hülle: %s\n"
#: g10/armor.c:320
msgid "invalid armor header: "
msgstr "Ungültige ASCII-Hülle"
#: g10/armor.c:327
msgid "armor header: "
msgstr "ASCII-Hülle: "
#: g10/armor.c:338
msgid "invalid clearsig header\n"
msgstr "Ungültige Klartextsignatur-Einleitung\n"
#: g10/armor.c:390
msgid "nested clear text signatures\n"
msgstr "verschachtelte Klartextunterschriften\n"
#: g10/armor.c:499
msgid "invalid dash escaped line: "
msgstr "Ungültige mit Bindestrich \"escapte\" Zeile: "
#: g10/armor.c:507
msgid "unexpected armor:"
msgstr "Unerwartete ASCII-Hülle:"
#: g10/armor.c:623
#, c-format
msgid "invalid radix64 character %02x skipped\n"
msgstr "Ungültiges \"radix64\" Zeichen %02x ignoriert\n"
#: g10/armor.c:666
msgid "premature eof (no CRC)\n"
msgstr "vorzeitiges Dateiende (keine Prüfsumme)\n"
#: g10/armor.c:700
msgid "premature eof (in CRC)\n"
msgstr "vorzeitiges Dateiende (innerhalb der Prüfsumme)\n"
#: g10/armor.c:704
msgid "malformed CRC\n"
msgstr "Falsch aufgebaute Prüfsumme\n"
#: g10/armor.c:708
#, c-format
msgid "CRC error; %06lx - %06lx\n"
msgstr "Prüfsummenfehler; %06lx - %06lx\n"
#: g10/armor.c:725
msgid "premature eof (in Trailer)\n"
msgstr "vorzeitiges Dateiende (im Nachsatz)\n"
#: g10/armor.c:729
msgid "error in trailer line\n"
msgstr "Fehler in der Nachsatzzeile\n"
#: g10/armor.c:993
msgid "no valid OpenPGP data found.\n"
msgstr "Keine gültigen OpenPGP-Daten gefunden.\n"
#: g10/armor.c:995
#, c-format
msgid "invalid armor: line longer than %d characters\n"
-msgstr ""
+msgstr "ungültige ASCII-Hülle: Zeile ist länger als %d Zeichen\n"
#: g10/armor.c:999
msgid ""
"quoted printable character in armor - probably a buggy MTA has been used\n"
msgstr ""
+"\"quoted printable\" Zeichen in der ASCII-Hülle gefunden - möglicherweise\n"
+" war ein fehlerhafter E-Mail-Spediteur(\"MTA\") die Ursache\n"
-#: g10/pkclist.c:136
+#: g10/pkclist.c:138
#, c-format
msgid ""
"No trust value assigned to %lu:\n"
"%4u%c/%08lX %s \""
msgstr ""
"Es ist kein \"Owner trust\" für %lu definiert:\n"
"%4u%c/%08lX %s \""
-#: g10/pkclist.c:146
+#: g10/pkclist.c:148
msgid ""
"Please decide how far you trust this user to correctly\n"
"verify other users' keys (by looking at passports,\n"
"checking fingerprints from different sources...)?\n"
"\n"
" 1 = Don't know\n"
" 2 = I do NOT trust\n"
" 3 = I trust marginally\n"
" 4 = I trust fully\n"
" s = please show me more information\n"
msgstr ""
"Bitte entscheiden Sie, in wieweit Sie diesem User zutrauen,\n"
"den Schlüssel eines anderen Users korrekt zu prüfen (Vergleich mit\n"
"Lictbildausweisen, Vergleich der Fingerabdrücke aus unterschiedlichen\n"
"Quellen ...)?\n"
"\n"
" 1 = Weiß nicht so recht\n"
" 2 = Nee, dem traue ich das nicht zu\n"
" 3 = Ich vertraue ihm normalerweise\n"
" 4 = Ich vertraue ihm vollständig\n"
" s = Bitte weitere Information anzeigen\n"
-#: g10/pkclist.c:155
+#: g10/pkclist.c:157
msgid " m = back to the main menu\n"
msgstr " m = Zurück zum Menü\n"
-#: g10/pkclist.c:157
+#: g10/pkclist.c:159
msgid " q = quit\n"
-msgstr ""
+msgstr " q = verlassen\n"
# valid user replies (not including 1..4)
#. a string with valid answers
-#: g10/pkclist.c:162
+#: g10/pkclist.c:164
msgid "sSmMqQ"
msgstr "sSmMqQ"
-#: g10/pkclist.c:166
+#: g10/pkclist.c:168
msgid "Your decision? "
msgstr "Ihre Auswahl? "
-#: g10/pkclist.c:186
+#: g10/pkclist.c:188
msgid "Certificates leading to an ultimately trusted key:\n"
msgstr "Zertifikate führen zu einem letztlich vertrauenswürdigen Schlüssel:\n"
-#: g10/pkclist.c:221
+#: g10/pkclist.c:223
msgid ""
"Could not find a valid trust path to the key. Let's see whether we\n"
"can assign some missing owner trust values.\n"
"\n"
msgstr ""
"Für diesen Schlüssel konnte kein gültiger \"Trust Path\" gefunden werden.\n"
"Mal sehen, ob wir sonst irgendwie ein paar fehlende \"Owner trust\" Werte \n"
"ermitteln können.\n"
"\n"
-#: g10/pkclist.c:260
+#: g10/pkclist.c:261
msgid ""
"No path leading to one of our keys found.\n"
"\n"
msgstr ""
"Kein Pfad führt zu einen unserer Schlüsseln.\n"
"\n"
-#: g10/pkclist.c:262
+#: g10/pkclist.c:263
msgid ""
"No certificates with undefined trust found.\n"
"\n"
msgstr ""
"Keine Zertifikate mit undefinierten Vertrauen gefunden.\n"
"\n"
-#: g10/pkclist.c:264
+#: g10/pkclist.c:265
msgid ""
"No trust values changed.\n"
"\n"
msgstr ""
"Keine \"trust\" Werte geändert.\n"
"\n"
-#: g10/pkclist.c:279
+#: g10/pkclist.c:280
#, c-format
msgid "key %08lX: key has been revoked!\n"
msgstr "Schlüssel %08lX: Schlüssel wurde widerrufen\n"
-#: g10/pkclist.c:285 g10/pkclist.c:397
+#: g10/pkclist.c:286 g10/pkclist.c:381
msgid "Use this key anyway? "
msgstr "Diesen Schlüssel trotzdem benutzen?"
-#: g10/pkclist.c:309
+#: g10/pkclist.c:308
#, c-format
msgid "%08lX: key has expired\n"
msgstr "%08lX: Schlüssel ist verfallen!\n"
-#: g10/pkclist.c:315
+#: g10/pkclist.c:314
#, c-format
msgid "%08lX: no info to calculate a trust probability\n"
msgstr ""
"%08lX: Keine Infos zur Berechnung der Vertrauenswahrscheinlichkeit "
"vorgefunden\n"
-#: g10/pkclist.c:333
+#: g10/pkclist.c:332
#, c-format
msgid "%08lX: We do NOT trust this key\n"
msgstr "%08lX: Wir haben KEIN Vertrauen zu diesem Schlüssel!\n"
-#: g10/pkclist.c:339
+#: g10/pkclist.c:338
#, c-format
msgid ""
"%08lX: It is not sure that this key really belongs to the owner\n"
"but it is accepted anyway\n"
msgstr ""
"%08lX: Es ist nicht sicher, daß dieser Schlüssel wirklich dem vorgeblichen\n"
"Besitzer gehört, aber er wird trotzdem akzeptiert\n"
-#: g10/pkclist.c:345
+#: g10/pkclist.c:344
msgid "This key probably belongs to the owner\n"
msgstr ""
"Dieser Schlüssel gehört höchstwahrscheinlich dem angegebenen Besitzer\n"
-#: g10/pkclist.c:350
+#: g10/pkclist.c:349
msgid "This key belongs to us\n"
msgstr ""
"Dieser Schlüssel gehört uns (da wir nämlich den geheimen Schlüssel dazu "
"haben)\n"
-#: g10/pkclist.c:392
+#: g10/pkclist.c:376
msgid ""
"It is NOT certain that the key belongs to its owner.\n"
"If you *really* know what you are doing, you may answer\n"
"the next question with yes\n"
"\n"
msgstr ""
"Es ist NICHT sicher, daß der Schlüssel dem vorgeblichen Besitzer gehört.\n"
"Wenn Sie *wirklich* wissen, was Sie tun, können Sie die nächste\n"
"Frage mit ja beantworten\n"
-#: g10/pkclist.c:405
+#: g10/pkclist.c:385
msgid "WARNING: Using untrusted key!\n"
msgstr "WARNUNG: Ein Schlüssel ohne gesichertes Vertrauen wird benutzt!\n"
-#: g10/pkclist.c:441
+#: g10/pkclist.c:421
msgid "WARNING: This key has been revoked by its owner!\n"
msgstr "WARNUNG: Dieser Schlüssel wurde von seinem Besitzer widerrufen!\n"
-#: g10/pkclist.c:442
+#: g10/pkclist.c:422
msgid " This could mean that the signature is forgery.\n"
msgstr " Das könnte bedeuten, daß die Signatur gefälscht ist.\n"
-#: g10/pkclist.c:463
+#: g10/pkclist.c:443
msgid "Note: This key has expired!\n"
msgstr "Hinweis: Dieser Schlüssel ist verfallen!\n"
-#: g10/pkclist.c:470
+#: g10/pkclist.c:450
msgid "WARNING: This key is not certified with a trusted signature!\n"
msgstr "WARNUNG: Dieser Schlüssel trägt keine vertrauenswürdige Signatur!\n"
-#: g10/pkclist.c:472
+#: g10/pkclist.c:452
msgid ""
" There is no indication that the signature belongs to the owner.\n"
msgstr ""
" Es gibt keinen Hinweis, daß die Signatur wirklich dem vorgeblichen "
"Besitzer gehört.\n"
-#: g10/pkclist.c:488
+#: g10/pkclist.c:468
msgid "WARNING: We do NOT trust this key!\n"
msgstr "WARNUNG: Wir haben KEIN Vertrauen zu diesem Schlüssel!\n"
-#: g10/pkclist.c:489
+#: g10/pkclist.c:469
msgid " The signature is probably a FORGERY.\n"
msgstr " Die Signatur ist wahrscheinlich eine FÄLSCHUNG.\n"
-#: g10/pkclist.c:496
+#: g10/pkclist.c:476
msgid ""
"WARNING: This key is not certified with sufficiently trusted signatures!\n"
msgstr ""
"WARNUNG: Dieser Schlüssel ist nicht durch hinreichend vertrauenswürdige "
"Signaturen zertifiziert!\n"
-#: g10/pkclist.c:499
+#: g10/pkclist.c:479
msgid " It is not certain that the signature belongs to the owner.\n"
msgstr ""
" Es ist nicht sicher, daß die Signatur wirklich dem vorgeblichen "
"Besitzer gehört.\n"
-#: g10/pkclist.c:552 g10/pkclist.c:565 g10/pkclist.c:628 g10/pkclist.c:656
+#: g10/pkclist.c:532 g10/pkclist.c:545 g10/pkclist.c:607 g10/pkclist.c:635
#, c-format
msgid "%s: skipped: %s\n"
msgstr "%s: übersprungen: %s\n"
-#: g10/pkclist.c:574
+#: g10/pkclist.c:554
msgid ""
"You did not specify a user ID. (you may use \"-r\")\n"
"\n"
msgstr ""
"Sie gaben keine User-ID angegeben (Benutzen Sie die Option \"-r\").\n"
"\n"
-#: g10/pkclist.c:579
+#: g10/pkclist.c:559
msgid "Enter the user ID: "
msgstr "Geben Sie die User-ID ein: "
-#: g10/pkclist.c:590
+#: g10/pkclist.c:570
msgid "No such user ID.\n"
msgstr "Keine solche User-ID vorhanden.\n"
-#: g10/pkclist.c:636
+#: g10/pkclist.c:615
#, c-format
msgid "%s: error checking key: %s\n"
msgstr "%s: Fehler beim Prüfen des Schlüssels: %s\n"
-#: g10/pkclist.c:662
+#: g10/pkclist.c:641
msgid "no valid addressees\n"
msgstr "Keine gültigen Adressaten\n"
#: g10/keygen.c:122
msgid "writing self signature\n"
msgstr "Die Eigenbeglaubigung wird geschrieben\n"
#: g10/keygen.c:160
msgid "writing key binding signature\n"
msgstr "Schreiben der \"key-binding\" Signatur\n"
#: g10/keygen.c:386
msgid "Please select what kind of key you want:\n"
msgstr "Bitte wählen Sie, welche Art von Schlüssel Sie möchten:\n"
#: g10/keygen.c:388
#, c-format
msgid " (%d) DSA and ElGamal (default)\n"
msgstr " (%d) DSA und ElGamal (voreingestellt)\n"
#: g10/keygen.c:389
#, c-format
msgid " (%d) DSA (sign only)\n"
msgstr " (%d) DSA (nur signieren/beglaubigen)\n"
#: g10/keygen.c:391
#, c-format
msgid " (%d) ElGamal (encrypt only)\n"
msgstr " (%d) ElGamal (nur verschlüsseln)\n"
#: g10/keygen.c:392
#, c-format
msgid " (%d) ElGamal (sign and encrypt)\n"
msgstr " (%d) ElGamal (signieren/beglaubigen und verschlüsseln)\n"
#: g10/keygen.c:394
#, c-format
msgid " (%d) ElGamal in a v3 packet\n"
msgstr " (%d) ElGamal in einem v3-Paket\n"
#: g10/keygen.c:399
msgid "Your selection? "
msgstr "Ihre Auswahl? "
#: g10/keygen.c:409
msgid "Do you really want to create a sign and encrypt key? "
msgstr ""
"Möchten Sie wirklich einen Unterschriften-/Verschlüsselungschlüssel "
"erzeugen? "
#: g10/keygen.c:430
msgid "Invalid selection.\n"
msgstr "Ungültige Auswahl.\n"
#: g10/keygen.c:442
#, c-format
msgid ""
"About to generate a new %s keypair.\n"
" minimum keysize is 768 bits\n"
" default keysize is 1024 bits\n"
" highest suggested keysize is 2048 bits\n"
msgstr ""
"Es wird ein neues %s Schlüsselpaar erzeugt.\n"
" kleinste Schlüssellänge ist 768 Bit\n"
" standard Schlüssellänge ist 1024 Bit\n"
" größte sinnvolle Schlüssellänge ist 2048 Bit\n"
#: g10/keygen.c:449
msgid "What keysize do you want? (1024) "
msgstr "Welche Schlüssellänge wünschen Sie? (1024) "
#: g10/keygen.c:454
msgid "DSA only allows keysizes from 512 to 1024\n"
msgstr "DSA erlaubt nur Schlüssellängen von 512 bis 1024\n"
#: g10/keygen.c:456
msgid "keysize too small; 768 is smallest value allowed.\n"
msgstr "zu kurz; 768 ist die kleinste mögliche Schlüssellänge.\n"
#: g10/keygen.c:459
msgid ""
"Keysizes larger than 2048 are not suggested because\n"
"computations take REALLY long!\n"
msgstr ""
"Schlüssellängen größer als 2048 werden nicht empfohlen, da die\n"
"Berechnungen dann WIRKLICH lange brauchen!\n"
#: g10/keygen.c:462
msgid "Are you sure that you want this keysize? "
msgstr "Sind Sie sicher, daß Sie diese Schlüssellänge wünschen? "
#: g10/keygen.c:463
msgid ""
"Okay, but keep in mind that your monitor and keyboard radiation is also very "
"vulnerable to attacks!\n"
msgstr ""
"Gut, aber bitte denken Sie auch daran, daß Monitor und Tastatur Daten "
"abstrahlen und diese leicht mitgelesen werden können.\n"
#: g10/keygen.c:471
msgid "Do you really need such a large keysize? "
msgstr "Brauchen Sie wirklich einen derartig langen Schlüssel? "
#: g10/keygen.c:477
#, c-format
msgid "Requested keysize is %u bits\n"
msgstr "Die verlangte Schlüssellänge beträgt %u Bit\n"
#: g10/keygen.c:480 g10/keygen.c:484
#, c-format
msgid "rounded up to %u bits\n"
msgstr "aufgerundet auf %u Bit\n"
#: g10/keygen.c:497
msgid ""
"Please specify how long the key should be valid.\n"
" 0 = key does not expire\n"
" <n> = key expires in n days\n"
" <n>w = key expires in n weeks\n"
" <n>m = key expires in n months\n"
" <n>y = key expires in n years\n"
msgstr ""
"Bitte wählen Sie, wie lange der Schlüssel gültig bleiben soll.\n"
" 0 = Schlüssel verfällt nie\n"
" <n> = Schlüssel verfällt nach n Tagen\n"
" <n>w = Schlüssel verfällt nach n Wochen\n"
" <n>m = Schlüssel verfällt nach n Monaten\n"
" <n>y = Schlüssel verfällt nach n Jahren\n"
#: g10/keygen.c:512
msgid "Key is valid for? (0) "
msgstr "Der Schlüssel bleibt wie lange gültig? (0) "
#: g10/keygen.c:523
msgid "invalid value\n"
msgstr "Ungültiger Wert.\n"
#: g10/keygen.c:528
msgid "Key does not expire at all\n"
msgstr "Der Schlüssel verfällt nie.\n"
#. print the date when the key expires
#: g10/keygen.c:534
#, c-format
msgid "Key expires at %s\n"
msgstr "Der Schlüssel verfällt am %s\n"
#: g10/keygen.c:540
msgid "Is this correct (y/n)? "
msgstr "Ist dies richtig? (j/n) "
-#: g10/keygen.c:583
+#: g10/keygen.c:582
msgid ""
"\n"
"You need a User-ID to identify your key; the software constructs the user "
"id\n"
"from Real Name, Comment and Email Address in this form:\n"
" \"Heinrich Heine (Der Dichter) <heinrichh@duesseldorf.de>\"\n"
"\n"
msgstr ""
"\n"
"Sie benötigen eine User-ID, um Ihren Schlüssel eindeutig zu machen; das\n"
"Programm baut diese User-ID aus Ihrem echten Namen, einem Kommentar und\n"
"Ihrer E-Mail-Adresse in dieser Form auf:\n"
" \"Heinrich Heine (Der Dichter) <heinrichh@duesseldorf.de>\"\n"
"\n"
-#: g10/keygen.c:594
+#: g10/keygen.c:593
msgid "Real name: "
msgstr "Ihr Name (\"Vorname Nachname\"): "
-#: g10/keygen.c:598
+#: g10/keygen.c:597
msgid "Invalid character in name\n"
msgstr "Ungültiges Zeichen im Namen\n"
-#: g10/keygen.c:600
+#: g10/keygen.c:599
msgid "Name may not start with a digit\n"
msgstr "Der Name darf nicht mit einer Ziffer beginnen.\n"
-#: g10/keygen.c:602
+#: g10/keygen.c:601
msgid "Name must be at least 5 characters long\n"
msgstr "Der Name muß min. 5 Zeichen lang sein.\n"
-#: g10/keygen.c:610
+#: g10/keygen.c:609
msgid "Email address: "
msgstr "E-Mail-Adresse: "
#: g10/keygen.c:621
msgid "Not a valid email address\n"
msgstr "Diese E-Mail-Adresse ist ungültig\n"
#: g10/keygen.c:629
msgid "Comment: "
msgstr "Kommentar: "
#: g10/keygen.c:635
msgid "Invalid character in comment\n"
msgstr "Ungültiges Zeichen im Kommentar.\n"
-#: g10/keygen.c:657
-#, c-format
-msgid "You are using the `%s' character set.\n"
-msgstr ""
-
-#: g10/keygen.c:663
+#: g10/keygen.c:655
#, c-format
msgid ""
"You selected this USER-ID:\n"
" \"%s\"\n"
"\n"
msgstr ""
"Sie haben diese User-ID gewählt:\n"
" \"%s\"\n"
"\n"
-#: g10/keygen.c:666
+#: g10/keygen.c:658
msgid "NnCcEeOoQq"
msgstr "NnKkEeFfBb"
-#: g10/keygen.c:676
+#: g10/keygen.c:668
msgid "Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? "
msgstr "Ändern: (N)ame, (K)ommentar, (E)-Mail oder (F)ertig/(B)eenden? "
-#: g10/keygen.c:728
+#: g10/keygen.c:720
msgid ""
"You need a Passphrase to protect your secret key.\n"
"\n"
msgstr ""
"Sie benötigen ein Mantra, um den geheimen Schlüssel zu schützen.\n"
"\n"
-#: g10/keyedit.c:389 g10/keygen.c:736
+#: g10/keyedit.c:389 g10/keygen.c:728
msgid "passphrase not correctly repeated; try again.\n"
msgstr "Mantra wurde nicht richtig wiederholt; noch einmal versuchen.\n"
-#: g10/keygen.c:742
+#: g10/keygen.c:734
msgid ""
"You don't want a passphrase - this is probably a *bad* idea!\n"
"I will do it anyway. You can change your passphrase at any time,\n"
"using this program with the option \"--edit-key\".\n"
"\n"
msgstr ""
"Sie möchten kein Mantra - Dies ist *nicht* zu empfehlen!\n"
"Es ist trotzdem möglich. Sie können Ihr Mantra jederzeit\n"
"ändern, indem sie dieses Programm mit dem Befehl \"--edit-key\"\n"
"aufrufen.\n"
"\n"
-#: g10/keygen.c:763
+#: g10/keygen.c:755
msgid ""
"We need to generate a lot of random bytes. It is a good idea to perform\n"
"some other action (work in another window, move the mouse, utilize the\n"
"network and the disks) during the prime generation; this gives the random\n"
"number generator a better chance to gain enough entropy.\n"
msgstr ""
"Wir müßen eine ganze Menge Zufallszahlen erzeugen. Sie können dies\n"
"unterstützen, indem Sie z.B. in einem anderen Fenster/Konsole irgendetwas\n"
"tippen oder irgendwelche anderen Programme benutzen.\n"
-#: g10/keygen.c:833
+#: g10/keygen.c:825
msgid "Key generation can only be used in interactive mode\n"
msgstr ""
"Die Schlüsselerzeugung kann nur im interaktiven Modus benutzt werden.\n"
-#: g10/keygen.c:841
+#: g10/keygen.c:833
msgid "DSA keypair will have 1024 bits.\n"
msgstr "Der DSA Schlüssel wird 1024 Bits haben.\n"
-#: g10/keygen.c:847
+#: g10/keygen.c:839
msgid "Key generation cancelled.\n"
msgstr "Schlüsselerzeugung abgebrochen.\n"
-#: g10/keygen.c:857
+#: g10/keygen.c:849
#, c-format
msgid "writing public certificate to `%s'\n"
msgstr "schreiben des öffentlichen Zertifikats nach '%s'\n"
-#: g10/keygen.c:858
+#: g10/keygen.c:850
#, c-format
msgid "writing secret certificate to `%s'\n"
msgstr "schreiben des geheimen Zertifikats nach '%s'\n"
-#: g10/keygen.c:935
+#: g10/keygen.c:927
msgid "public and secret key created and signed.\n"
msgstr "Öffentlichen und geheimen Schlüssel erzeugt und signiert.\n"
-#: g10/keygen.c:937
+#: g10/keygen.c:929
msgid ""
"Note that this key cannot be used for encryption. You may want to use\n"
"the command \"--edit-key\" to generate a secondary key for this purpose.\n"
msgstr ""
"Bitte beachten Sie, daß dieser Schlüssel nicht zum Verschlüsseln benutzt\n"
"werden kann. Sie können aber mit dem Befehl \"--edit-key\" einen\n"
"Zweitschlüssel für diesem Zweck erzeugen.\n"
-#: g10/keygen.c:951 g10/keygen.c:1050
+#: g10/keygen.c:943 g10/keygen.c:1042
#, c-format
msgid "Key generation failed: %s\n"
msgstr "Schlüsselerzeugung fehlgeschlagen: %s\n"
-#: g10/keygen.c:995 g10/sig-check.c:212 g10/sign.c:52
+#: g10/keygen.c:987 g10/sig-check.c:172 g10/sign.c:52
#, c-format
msgid ""
"key has been created %lu second in future (time warp or clock problem)\n"
msgstr ""
-"Der Schlüssel wurde %lu Sekunde in der Zukunft erzeugt (Zeitreise oder Uhren "
-"stimmen nicht überein)\n"
+"Der Schlüssel wurde %lu Sekunde in der Zukunft erzeugt (Zeitreise oder "
+"Uhren stimmen nicht überein)\n"
-#: g10/keygen.c:997 g10/sig-check.c:214 g10/sign.c:54
+#: g10/keygen.c:989 g10/sig-check.c:174 g10/sign.c:54
#, c-format
msgid ""
"key has been created %lu seconds in future (time warp or clock problem)\n"
msgstr ""
"Der Schlüssel wurde %lu Sekunden in der Zukunft erzeugt (Zeitreise oder "
"Uhren stimmen nicht überein)\n"
-#: g10/keygen.c:1028
+#: g10/keygen.c:1020
msgid "Really create? "
msgstr "Wirklich erzeugen? "
-#: g10/encode.c:88 g10/openfile.c:86 g10/openfile.c:174 g10/tdbio.c:467
+#: g10/encode.c:88 g10/openfile.c:86 g10/openfile.c:169 g10/tdbio.c:467
#: g10/tdbio.c:527
#, c-format
msgid "%s: can't open: %s\n"
msgstr "%s: kann nicht geöffnet werden: %s\n"
#: g10/encode.c:107
#, c-format
msgid "error creating passphrase: %s\n"
msgstr "Fehler beim Erzeugen des Mantras: %s\n"
-#: g10/encode.c:161 g10/encode.c:275
+#: g10/encode.c:155 g10/encode.c:269
#, c-format
msgid "%s: WARNING: empty file\n"
msgstr "%s: WARNUNG: Leere Datei\n"
-#: g10/encode.c:228
+#: g10/encode.c:222
#, c-format
msgid "reading from `%s'\n"
msgstr "Lesen von '%s'\n"
-#: g10/encode.c:403
+#: g10/encode.c:397
#, c-format
msgid "%s/%s encrypted for: %s\n"
msgstr "%s verschlüsselt für: %s\n"
#: g10/export.c:147
#, c-format
msgid "%s: user not found: %s\n"
msgstr "%s: Benutzer nicht gefunden: %s\n"
#: g10/export.c:156
#, c-format
msgid "certificate read problem: %s\n"
msgstr "Zertifikat Leseproblem: %s\n"
#: g10/export.c:165
#, c-format
msgid "key %08lX: not a rfc2440 key - skipped\n"
msgstr "Schlüssel %08lX: dies ist kein rfc2440-Schüssel - übersprungen\n"
#: g10/export.c:203
msgid "WARNING: nothing exported\n"
msgstr "WARNUNG: Nichts exportiert\n"
#: g10/getkey.c:205
msgid "too many entries in pk cache - disabled\n"
msgstr "zu viele Einträge im pk-Lager - abgeschaltet\n"
#: g10/getkey.c:344
msgid "too many entries in unk cache - disabled\n"
msgstr "zu viele Einträge im unk-Lager - abgeschaltet\n"
-#: g10/getkey.c:1502 g10/getkey.c:1558
+#: g10/getkey.c:1496 g10/getkey.c:1552
#, c-format
msgid "using secondary key %08lX instead of primary key %08lX\n"
msgstr ""
"der Zweitschlüssel %08lX wird anstelle des Hauptschlüssels %08lX verwendet\n"
-#: g10/import.c:116 g10/trustdb.c:1228
+#: g10/import.c:116 g10/trustdb.c:1318
#, c-format
msgid "can't open file: %s\n"
msgstr "Kann die Datei nicht öffnen: %s\n"
#: g10/import.c:160
#, c-format
msgid "skipping block of type %d\n"
msgstr "überspringe den Block vom Typ %d\n"
-#: g10/import.c:167 g10/trustdb.c:1564 g10/trustdb.c:1637
+#: g10/import.c:167 g10/trustdb.c:1635 g10/trustdb.c:1704
#, c-format
msgid "%lu keys so far processed\n"
msgstr "%lu Schlüssel bislang bearbeitet\n"
-#: g10/import.c:172 g10/trustdb.c:1304
+#: g10/import.c:172 g10/trustdb.c:1394
#, c-format
msgid "read error: %s\n"
msgstr "Lesefehler: %s\n"
#: g10/import.c:174
#, c-format
msgid "Total number processed: %lu\n"
msgstr "Anzahl insgesamt bearbeiteter Schlüssel: %lu\n"
#: g10/import.c:176
#, c-format
msgid " w/o user IDs: %lu\n"
msgstr " ohne User-ID: %lu\n"
#: g10/import.c:178
#, c-format
msgid " imported: %lu"
msgstr " importiert: %lu"
#: g10/import.c:184
#, c-format
msgid " unchanged: %lu\n"
msgstr " unverändert: %lu\n"
#: g10/import.c:186
#, c-format
msgid " new user IDs: %lu\n"
msgstr " neue User-IDs: %lu\n"
#: g10/import.c:188
#, c-format
msgid " new subkeys: %lu\n"
msgstr " neue Unterschlüssel: %lu\n"
#: g10/import.c:190
#, c-format
msgid " new signatures: %lu\n"
msgstr " neue Signaturen: %lu\n"
#: g10/import.c:192
#, c-format
msgid " new key revocations: %lu\n"
msgstr "neue Schlüsselwiderrufe: %lu\n"
#: g10/import.c:194
#, c-format
msgid " secret keys read: %lu\n"
msgstr " gelesene geheime Schl.: %lu\n"
#: g10/import.c:196
#, c-format
msgid " secret keys imported: %lu\n"
msgstr "geheime Schlüssel importiert: %lu\n"
#: g10/import.c:198
#, c-format
msgid " secret keys unchanged: %lu\n"
msgstr " unveränderte geh.Schl.: %lu\n"
#: g10/import.c:340 g10/import.c:532
#, c-format
msgid "key %08lX: no user id\n"
msgstr "Schlüssel %08lX: Keine User-ID\n"
#: g10/import.c:351
#, c-format
msgid "key %08lX: no valid user ids\n"
msgstr "Schlüssel %08lX: Keine gültigen User-IDs\n"
#: g10/import.c:353
msgid "this may be caused by a missing self-signature\n"
msgstr "dies könnte durch fehlende Eigenbeglaubigung verursacht worden sein\n"
#: g10/import.c:364 g10/import.c:600
#, c-format
msgid "key %08lX: public key not found: %s\n"
msgstr "Schlüssel %08lX: Öffentlicher Schlüssel nicht gefunden: %s\n"
#: g10/import.c:370
msgid "no default public keyring\n"
msgstr "Kein voreingestellter öffentlicher Schlüsselbund\n"
-#: g10/import.c:374 g10/openfile.c:115 g10/sign.c:215 g10/sign.c:498
+#: g10/import.c:374 g10/openfile.c:113 g10/sign.c:215 g10/sign.c:601
#, c-format
msgid "writing to `%s'\n"
msgstr "Schreiben nach '%s'\n"
#: g10/import.c:378 g10/import.c:438 g10/import.c:654
#, c-format
msgid "can't lock public keyring: %s\n"
msgstr "kann öffentlichen Schlüsselbund nicht sperren: %s\n"
#: g10/import.c:381
#, c-format
msgid "can't write to keyring: %s\n"
msgstr "kann Schlüsselbund nicht schreiben: %s\n"
#: g10/import.c:385
#, c-format
msgid "key %08lX: public key imported\n"
msgstr "Schlüssel %08lX: Öffentlicher Schlüssel importiert\n"
#: g10/import.c:398
#, c-format
msgid "key %08lX: doesn't match our copy\n"
msgstr "Schlüssel %08lX: Stimmt nicht mit unserer Kopie überein\n"
#: g10/import.c:411 g10/import.c:609
#, c-format
msgid "key %08lX: can't locate original keyblock: %s\n"
msgstr ""
"Schlüssel %08lX: der lokale originale Schlüsselblocks wurde nicht gefunden: "
"%s\n"
#: g10/import.c:418 g10/import.c:616
#, c-format
msgid "key %08lX: can't read original keyblock: %s\n"
msgstr ""
"Schlüssel %08lX: Lesefehler im lokalen originalen Schlüsselblocks: %s\n"
#: g10/import.c:435 g10/import.c:547 g10/import.c:651
msgid "writing keyblock\n"
msgstr "Schreiben des Schlüsselblocks\n"
#: g10/import.c:441 g10/import.c:657
#, c-format
msgid "can't write keyblock: %s\n"
msgstr "Der Schlüsselblock kann nicht geschrieben werden: %s\n"
#: g10/import.c:446
#, c-format
msgid "key %08lX: 1 new user-id\n"
msgstr "Schlüssel %08lX: 1 neue User-ID\n"
#: g10/import.c:449
#, c-format
msgid "key %08lX: %d new user-ids\n"
msgstr "Schlüssel %08lX: %d neue User-IDs\n"
#: g10/import.c:452
#, c-format
msgid "key %08lX: 1 new signature\n"
msgstr "Schlüssel %08lX: 1 neue Signatur\n"
#: g10/import.c:455
#, c-format
msgid "key %08lX: %d new signatures\n"
msgstr "Schlüssel %08lX: %d neue Signaturen\n"
#: g10/import.c:458
#, c-format
msgid "key %08lX: 1 new subkey\n"
msgstr "Schlüssel %08lX: 1 neuer Unterschlüssel\n"
#: g10/import.c:461
#, c-format
msgid "key %08lX: %d new subkeys\n"
msgstr "Schlüssel %08lX: %d neue Unterschlüssel\n"
#: g10/import.c:471
#, c-format
msgid "key %08lX: not changed\n"
msgstr "Schlüssel %08lX: Nicht geändert\n"
#: g10/import.c:550
#, c-format
msgid "can't lock secret keyring: %s\n"
msgstr "kann geheimen Schlüsselbund nicht sperren: %s\n"
#: g10/import.c:553
#, c-format
msgid "can't write keyring: %s\n"
msgstr "kann Schlüsselbund nicht schreiben: %s\n"
#. we are ready
#: g10/import.c:556
#, c-format
msgid "key %08lX: secret key imported\n"
msgstr "Schlüssel %08lX: Geheimer Schlüssel importiert\n"
#. we can't merge secret keys
#: g10/import.c:560
#, c-format
msgid "key %08lX: already in secret keyring\n"
msgstr "Schlüssel %08lX: Ist bereits im geheimen Schlüsselbund\n"
#: g10/import.c:565
#, c-format
msgid "key %08lX: secret key not found: %s\n"
msgstr "Schlüssel %08lX: geheimer Schlüssel nicht gefunden: %s\n"
#: g10/import.c:594
#, c-format
msgid "key %08lX: no public key - can't apply revocation certificate\n"
msgstr ""
"Schlüssel %08lX: Kein öffentlicher Schlüssel - der Schlüsselwiderruf kann "
"nicht angebracht werden\n"
#: g10/import.c:627
#, c-format
msgid "key %08lX: invalid revocation certificate: %s - rejected\n"
msgstr "Schlüssel %08lX: Ungültiges Widerrufzertifikat: %s - zurückgewiesen\n"
#: g10/import.c:661
#, c-format
msgid "key %08lX: revocation certificate imported\n"
msgstr "Schlüssel %08lX: Widerrufzertifikat importiert\n"
#: g10/import.c:695
#, c-format
msgid "key %08lX: no user-id for signature\n"
msgstr "Schlüssel %08lX: Keine User-ID für Signatur\n"
#: g10/import.c:702 g10/import.c:727
#, c-format
msgid "key %08lX: unsupported public key algorithm\n"
msgstr "Schlüssel %08lX: Nicht unterstützetes Public-Key-Verfahren\n"
#: g10/import.c:703
#, c-format
msgid "key %08lX: invalid self-signature\n"
msgstr "Schlüssel %08lX: Ungültige Eigenbeglaubigung\n"
#: g10/import.c:719
#, c-format
msgid "key %08lX: no subkey for key binding\n"
msgstr "Schlüssel %08lX: Kein Unterschlüssel für die Schlüsselanbindung\n"
#: g10/import.c:728
#, c-format
msgid "key %08lX: invalid subkey binding\n"
msgstr "Schlüssel %08lX: Ungültige Unterschlüssel-Anbindung\n"
#: g10/import.c:759
#, c-format
msgid "key %08lX: skipped userid '"
msgstr "Schlüssel %08lX: übergehe User-ID '"
#: g10/import.c:779
-#, fuzzy, c-format
+#, c-format
msgid "key %08lX: skipped subkey\n"
msgstr "Schlüssel %08lX: Unterschlüssel ignoriert\n"
#: g10/import.c:798
#, c-format
msgid "key %08lX: revocation certificate at wrong place - skipped\n"
msgstr "Schlüssel %08lX: Widerrufzertifikat an falschem Platz - übergangen\n"
#: g10/import.c:806
#, c-format
msgid "key %08lX: invalid revocation certificate: %s - skipped\n"
msgstr "Schlüssel %08lX: Ungültiges Widerrufzertifikat: %s - übergangen\n"
#: g10/import.c:867
#, c-format
msgid "key %08lX: revocation certificate added\n"
msgstr "Schlüssel %08lX: Widerrufzertifikat hinzugefügt\n"
#: g10/import.c:981 g10/import.c:1036
#, c-format
msgid "key %08lX: our copy has no self-signature\n"
msgstr "Schlüssel %08lX: Unsere Kopie hat keine Eigenbeglaubigung\n"
#: g10/keyedit.c:81
#, c-format
msgid "%s: user not found\n"
msgstr "%s: Benutzer nicht gefunden\n"
#: g10/keyedit.c:164
msgid "[self-signature]"
msgstr "[Eigenbeglaubigung]"
#: g10/keyedit.c:182
msgid "1 bad signature\n"
msgstr "%d schlechte Signaturen\n"
#: g10/keyedit.c:184
#, c-format
msgid "%d bad signatures\n"
msgstr "%d falsche Beglaubigungen\n"
#: g10/keyedit.c:186
msgid "1 signature not checked due to a missing key\n"
msgstr "1 Beglaubigung wegen fehlendem Schlüssel nicht geprüft\n"
#: g10/keyedit.c:188
#, c-format
msgid "%d signatures not checked due to missing keys\n"
msgstr "%d Beglaubigungen wegen fehlenden Schlüsseln nicht geprüft\n"
#: g10/keyedit.c:190
msgid "1 signature not checked due to an error\n"
msgstr "1 Beglaubigung aufgrund von Fehler nicht geprüft\n"
#: g10/keyedit.c:192
#, c-format
msgid "%d signatures not checked due to errors\n"
msgstr "%d Beglaubigungen aufgrund von Fehlern nicht geprüft\n"
#: g10/keyedit.c:194
msgid "1 user id without valid self-signature detected\n"
msgstr "Eine User-ID ohne gültige Eigenbeglaubigung entdeckt\n"
#: g10/keyedit.c:196
#, c-format
msgid "%d user ids without valid self-signatures detected\n"
msgstr "%d User-IDs ohne gültige Eigenbeglaubigung entdeckt\n"
#: g10/keyedit.c:258
#, c-format
msgid "Already signed by key %08lX\n"
msgstr "Ist bereits durch Schlüssel %08lX beglaubigt.\n"
#: g10/keyedit.c:266
#, c-format
msgid "Nothing to sign with key %08lX\n"
msgstr "Nichts zu beglaubigen für Schlüssel %08lX\n"
#: g10/keyedit.c:275
msgid ""
"Are you really sure that you want to sign this key\n"
"with your key: \""
msgstr ""
"Sind Sie wirklich sicher, daß Sie vorstehenden Schlüssel mit Ihrem\n"
"Schlüssel beglaubigen wollen: \""
#: g10/keyedit.c:282
msgid "Really sign? "
msgstr "Wirklich unterschreiben? "
#: g10/keyedit.c:303 g10/sign.c:75
#, c-format
msgid "signing failed: %s\n"
msgstr "Beglaubigung fehlgeschlagen: %s\n"
#: g10/keyedit.c:356
msgid "This key is not protected.\n"
msgstr "Dieser Schlüssel ist nicht geschützt.\n"
#: g10/keyedit.c:359
msgid "Key is protected.\n"
msgstr "Schlüssel ist geschützt.\n"
#: g10/keyedit.c:376
#, c-format
msgid "Can't edit this key: %s\n"
msgstr "Dieser Schlüssel kann nicht editiert werden: %s\n"
#: g10/keyedit.c:381
msgid ""
"Enter the new passphrase for this secret key.\n"
"\n"
msgstr ""
"Geben Sie das neue Mantra für diesen geheimen Schlüssel ein.\n"
"\n"
#: g10/keyedit.c:393
msgid ""
"You don't want a passphrase - this is probably a *bad* idea!\n"
"\n"
msgstr ""
"Sie wollen kein Mantra - dies ist bestimmt *keine* gute Idee!\n"
"\n"
#: g10/keyedit.c:396
msgid "Do you really want to do this? "
msgstr "Möchten Sie dies wirklich tun? "
#: g10/keyedit.c:455
msgid "moving a key signature to the correct place\n"
msgstr "schiebe eine Beglaubigung an die richtige Stelle\n"
#: g10/keyedit.c:490
msgid "quit"
msgstr "quit"
#: g10/keyedit.c:490
msgid "quit this menu"
msgstr "Menü verlassen"
#: g10/keyedit.c:491
msgid "q"
msgstr "q"
#: g10/keyedit.c:492
msgid "save"
msgstr "save"
#: g10/keyedit.c:492
msgid "save and quit"
msgstr "speichern und Menü verlassen"
#: g10/keyedit.c:493
msgid "help"
msgstr "help"
#: g10/keyedit.c:493
msgid "show this help"
msgstr "Diese Hilfe zeigen"
#: g10/keyedit.c:495
msgid "fpr"
msgstr "fpr"
#: g10/keyedit.c:495
msgid "show fingerprint"
msgstr "\"Fingerabdruck\" anzeigen"
#: g10/keyedit.c:496
msgid "list"
msgstr "Liste der Schlüssel"
#: g10/keyedit.c:496
msgid "list key and user ids"
msgstr "Schlüssel und User-ID auflisten"
#: g10/keyedit.c:497
msgid "l"
msgstr "l"
#: g10/keyedit.c:498
msgid "uid"
msgstr "uid"
#: g10/keyedit.c:498
msgid "select user id N"
msgstr "User-ID N auswählen"
#: g10/keyedit.c:499
msgid "key"
msgstr "key"
#: g10/keyedit.c:499
msgid "select secondary key N"
msgstr "Zweitschlüssel N auswählen"
#: g10/keyedit.c:500
msgid "check"
msgstr "check"
#: g10/keyedit.c:500
msgid "list signatures"
msgstr "Liste der Signaturen"
#: g10/keyedit.c:501
msgid "c"
msgstr "c"
#: g10/keyedit.c:502
msgid "sign"
msgstr "sign"
#: g10/keyedit.c:502
msgid "sign the key"
msgstr "Den Schlüssel signieren"
#: g10/keyedit.c:503
msgid "s"
msgstr "s"
#: g10/keyedit.c:504
msgid "debug"
msgstr "debug"
#: g10/keyedit.c:505
msgid "adduid"
msgstr "adduid"
#: g10/keyedit.c:505
msgid "add a user id"
msgstr "Eine User-ID hinzufügen"
#: g10/keyedit.c:506
msgid "deluid"
msgstr "deluid"
#: g10/keyedit.c:506
msgid "delete user id"
msgstr "User-ID entfernen"
#: g10/keyedit.c:507
msgid "addkey"
msgstr "addkey"
#: g10/keyedit.c:507
msgid "add a secondary key"
msgstr "Einen Zweitschlüssel hinzufügen"
#: g10/keyedit.c:508
msgid "delkey"
msgstr "delkey"
#: g10/keyedit.c:508
msgid "delete a secondary key"
msgstr "Einen Zweitschlüssel entfernen"
#: g10/keyedit.c:509
msgid "expire"
msgstr "expire"
#: g10/keyedit.c:509
msgid "change the expire date"
msgstr "Ändern des Verfallsdatums"
#: g10/keyedit.c:510
msgid "toggle"
msgstr "toggle"
#: g10/keyedit.c:510
msgid "toggle between secret and public key listing"
msgstr "Umschalten zwischen Anzeige geheimer und öffentlicher Schlüssel"
#: g10/keyedit.c:512
msgid "t"
msgstr "t"
#: g10/keyedit.c:513
msgid "pref"
msgstr "pref"
#: g10/keyedit.c:513
msgid "list preferences"
msgstr "Liste der Voreinstellungen"
#: g10/keyedit.c:514
msgid "passwd"
msgstr "passwd"
#: g10/keyedit.c:514
msgid "change the passphrase"
msgstr "Das Mantra ändern"
#: g10/keyedit.c:515
msgid "trust"
msgstr "trust"
#: g10/keyedit.c:515
msgid "change the ownertrust"
msgstr "Den \"Owner trust\" ändern"
#: g10/keyedit.c:534
msgid "can't do that in batchmode\n"
msgstr "Dies kann im Batchmodus nicht durchgeführt werden.\n"
#. check that they match
#. FIXME: check that they both match
#: g10/keyedit.c:561
msgid "Secret key is available.\n"
msgstr "Geheimer Schlüssel ist vorhanden.\n"
#: g10/keyedit.c:590
msgid "Command> "
msgstr "Befehl> "
#: g10/keyedit.c:617
msgid "Need the secret key to do this.\n"
msgstr "Hierzu wird der geheime Schlüssel benötigt.\n"
#: g10/keyedit.c:639
msgid "Save changes? "
msgstr "Änderungen speichern? "
#: g10/keyedit.c:642
msgid "Quit without saving? "
msgstr "Beenden ohne zu speichern? "
#: g10/keyedit.c:652
#, c-format
msgid "update failed: %s\n"
msgstr "Änderung fehlgeschlagen: %s\n"
#: g10/keyedit.c:659
#, c-format
msgid "update secret failed: %s\n"
msgstr "Änderung des Geheimnisses fehlgeschlagen: %s\n"
#: g10/keyedit.c:666
msgid "Key not changed so no update needed.\n"
msgstr "Schlüssel ist nicht geändert worden, also ist kein Speichern nötig.\n"
#: g10/keyedit.c:669 g10/keyedit.c:727
#, c-format
msgid "update of trustdb failed: %s\n"
msgstr "Änderung der \"Trust-DB\" fehlgeschlagen: %s\n"
#: g10/keyedit.c:701
msgid "Really sign all user ids? "
msgstr "Wirklich alle User-IDs beglaubigen? "
#: g10/keyedit.c:702
msgid "Hint: Select the user ids to sign\n"
msgstr "Tip: Wählen Sie die User-ID, die beglaubigt werden soll\n"
#: g10/keyedit.c:738
msgid "You must select at least one user id.\n"
msgstr "Zumindestens eine User-ID muß ausgewählt werden.\n"
#: g10/keyedit.c:740
msgid "You can't delete the last user id!\n"
msgstr "Die letzte User-ID kann nicht gelöscht werden!\n"
#: g10/keyedit.c:743
msgid "Really remove all selected user ids? "
msgstr "Möchten Sie alle ausgewählten User-IDs wirklich entfernen? "
#: g10/keyedit.c:744
msgid "Really remove this user id? "
msgstr "Diese User-ID wirklich entfernen? "
#: g10/keyedit.c:767
msgid "You must select at least one key.\n"
msgstr "Zumindestens ein Schlüssel muß ausgewählt werden.\n"
#: g10/keyedit.c:771
msgid "Do you really want to delete the selected keys? "
msgstr "Möchten Sie die ausgewählten Schlüssel wirklich entfernen? "
#: g10/keyedit.c:772
msgid "Do you really want to delete this key? "
msgstr "Möchten Sie diesen Schlüssel wirklich entfernen? "
#: g10/keyedit.c:819
msgid "Invalid command (try \"help\")\n"
msgstr "Ungültiger Befehl (versuchen Sie's mal mit \"help\")\n"
#: g10/keyedit.c:1197
msgid "Please remove selections from the secret keys.\n"
msgstr "Bitte entfernen Sie die Auswahl von den geheimen Schlüsseln.\n"
#: g10/keyedit.c:1203
msgid "Please select at most one secondary key.\n"
msgstr "Bitte wählen Sie höchstens einen Zweitschlüssel aus.\n"
#: g10/keyedit.c:1207
msgid "Changing exiration time for a secondary key.\n"
msgstr "Ändern des Verfallsdatums des Zweitschlüssels.\n"
#: g10/keyedit.c:1209
msgid "Changing exiration time for the primary key.\n"
msgstr "Ändern des Verfallsdatums des Hauptschlüssels.\n"
#: g10/keyedit.c:1250
msgid "You can't change the expiration date of a v3 key\n"
msgstr "Sie können das Verfallsdatum eines v3-Schlüssels nicht ändern\n"
#: g10/keyedit.c:1266
msgid "No corresponding signature in secret ring\n"
msgstr "Keine entsprechende Signatur im geheimen Schlüsselbund\n"
#: g10/keyedit.c:1326
#, c-format
msgid "No user id with index %d\n"
msgstr "Keine User-ID mit Index %d\n"
-#: g10/keyedit.c:1372
+#: g10/keyedit.c:1371
#, c-format
msgid "No secondary key with index %d\n"
msgstr "Kein Zweitschlüssel mit Index %d\n"
-#: g10/mainproc.c:202
+#: g10/mainproc.c:199
msgid "public key encrypted data: good DEK\n"
msgstr "Mit öffentlichem Schüssel verschlüsselte Daten: Korrekte DEK\n"
-#. fixme: defer this message until we have parsed all packets of
-#. * this type - do this by building a list of keys with their stati
-#. * and store it with the conetxt. do_proc_packets can then use
-#. * this list to display some information
-#: g10/mainproc.c:209
+#: g10/mainproc.c:202
#, c-format
msgid "public key decryption failed: %s\n"
msgstr "Entschlüsselung mit öffentlichem Schlüssel fehlgeschlagen: %s\n"
-#: g10/mainproc.c:236
+#: g10/mainproc.c:229
msgid "decryption okay\n"
msgstr "Enschlüsselung fehlgeschlagen: %s\n"
-#: g10/mainproc.c:239
+#: g10/mainproc.c:232
#, c-format
msgid "decryption failed: %s\n"
msgstr "Enschlüsselung fehlgeschlagen: %s\n"
-#: g10/mainproc.c:256
+#: g10/mainproc.c:249
msgid "NOTE: sender requested \"for-your-eyes-only\"\n"
msgstr ""
"Hinweis: Der Absender verlangte Vertraulichkeit(\"for-your-eyes-only\")\n"
-#: g10/mainproc.c:258
+#: g10/mainproc.c:251
#, c-format
msgid "original file name='%.*s'\n"
msgstr "Ursprünglicher Dateiname='%.*s'\n"
-#: g10/mainproc.c:839
+#: g10/mainproc.c:831
msgid "signature verification suppressed\n"
msgstr "Unterschriften-Überprüfung unterdrückt\n"
-#: g10/mainproc.c:845
+#: g10/mainproc.c:837
#, c-format
+# Scripte scannen lt. dl1bke auf "ID (0-9A-F)+" deswegen muß "ID" rein :-(
msgid "Signature made %.*s using %s key ID %08lX\n"
-msgstr "Unterschrieben am %.*s mit %s Schlüssel %08lX\n"
+msgstr "Unterschrift vom %.*s, %s Schlüssel ID %08lX\n"
#. just in case that we have no userid
-#: g10/mainproc.c:871 g10/mainproc.c:882
+#: g10/mainproc.c:863 g10/mainproc.c:874
msgid "BAD signature from \""
msgstr "FALSCHE Unterschrift von \""
-#: g10/mainproc.c:872 g10/mainproc.c:883
+#: g10/mainproc.c:864 g10/mainproc.c:875
msgid "Good signature from \""
msgstr "Korrekte Unterschrift von \""
-#: g10/mainproc.c:874
+#: g10/mainproc.c:866
msgid " aka \""
-msgstr " alias \""
+msgstr " alias \""
-#: g10/mainproc.c:916
+#: g10/mainproc.c:908
#, c-format
msgid "Can't check signature: %s\n"
-msgstr "Signatur kann nicht geprüft werden: %s\n"
+msgstr "Unterschrift kann nicht geprüft werden: %s\n"
-#: g10/mainproc.c:989
+#: g10/mainproc.c:981
msgid "old style (PGP 2.x) signature\n"
msgstr "Unterschrift nach alter (PGP 2.x) Art\n"
-#: g10/mainproc.c:994
+#: g10/mainproc.c:986
msgid "invalid root packet detected in proc_tree()\n"
msgstr "ungültiges root-Paket in proc_tree() entdeckt\n"
#: g10/misc.c:90
#, c-format
msgid "can't disable core dumps: %s\n"
msgstr "core-dump-Dateierzeugung kann nicht abgeschaltet werden: %s\n"
#: g10/misc.c:93
msgid "WARNING: program may create a core file!\n"
-msgstr "WARNUNG: Programm könnte einen core-dump-Datei schreiben!\n"
+msgstr "WARNUNG: Programm könnte eine core-dump-Datei schreiben!\n"
#: g10/misc.c:200
msgid "Experimental algorithms should not be used!\n"
msgstr "Experimentiermethoden sollten nicht benutzt werden!\n"
#: g10/misc.c:214
msgid ""
"RSA keys are deprecated; please consider creating a new key and use this key "
"in the future\n"
msgstr ""
"RSA Schlüssel sind nicht erwünscht; bitte denken Sie darüber nach, einen\n"
"neuen Schlüssel zu erzeugen und diesen in Zukunft zu benutzen\n"
#: g10/misc.c:235
-#, fuzzy
msgid "this cipher algorithm is depreciated; please use a more standard one!\n"
msgstr ""
"Diees Verschlüsselungsmethode taugt nicht mehr viel; verwenden Sie eine "
"stärker standardisierte Methode!\n"
#: g10/parse-packet.c:113
#, c-format
msgid "can't handle public key algorithm %d\n"
msgstr "dieses Public-Key Verfahren %d kann nicht benutzt werden\n"
#: g10/parse-packet.c:892
#, c-format
msgid "subpacket of type %d has critical bit set\n"
-msgstr "Unterpaket des Typs %d hat das \"critical bit\" gesetzt\n"
+msgstr "Im Unterpaket des Typs %d ist das \"critical bit\" gesetzt\n"
#: g10/passphrase.c:141
msgid ""
"\n"
"You need a passphrase to unlock the secret key for\n"
"user: \""
msgstr ""
"\n"
"Sie benötigen ein Mantra, um den geheimen Schlüssel zu entsperren.\n"
"Benutzer: \""
#: g10/passphrase.c:150
#, c-format
msgid "%u-bit %s key, ID %08lX, created %s"
msgstr "%u-Bit %s Schlüssel, ID %08lX, erzeugt %s"
#: g10/passphrase.c:155
#, c-format
msgid " (main key ID %08lX)"
msgstr " (Hauptschlüssel-ID %08lX)"
#: g10/passphrase.c:183
msgid "Enter passphrase: "
msgstr "Geben Sie das Mantra ein: "
#: g10/passphrase.c:187
msgid "Repeat passphrase: "
msgstr "Geben Sie das Mantra nochmal ein: "
#: g10/plaintext.c:63
msgid "data not saved; use option \"--output\" to save it\n"
msgstr ""
"Daten wurden nicht gespeichert; verwenden Sie dafür die Option \"--output\"\n"
#: g10/plaintext.c:208
msgid "Please enter name of data file: "
msgstr "Bitte geben Sie den Namen der Datendatei ein: "
#: g10/plaintext.c:229
msgid "reading stdin ...\n"
msgstr "lese stdin ...\n"
#: g10/plaintext.c:292
#, c-format
msgid "can't open signed data `%s'\n"
msgstr "kann signierte Datei '%s' nicht öffnen.\n"
#: g10/pubkey-enc.c:79
#, c-format
msgid "anonymous receiver; trying secret key %08lX ...\n"
msgstr "Ungenannter Empfänger: Versuch mit geheimen Schlüssel %08lX ...\n"
#: g10/pubkey-enc.c:85
msgid "okay, we are the anonymous recipient.\n"
msgstr "Alles klar, wir sind der ungenannte Empfänger.\n"
#: g10/pubkey-enc.c:137
msgid "old encoding of the DEK is not supported\n"
msgstr "alte Kodierung des DEK wird nicht unterstützt\n"
#: g10/pubkey-enc.c:191
#, c-format
msgid "NOTE: cipher algorithm %d not found in preferences\n"
msgstr "Hinweis: Verfahren %d ist kein bevorzugtes Verschlüsselungsverfahren\n"
#: g10/seckey-cert.c:56
#, c-format
msgid "protection algorithm %d is not supported\n"
msgstr "Schutzverfahren %d wird nicht unterstützt\n"
#: g10/seckey-cert.c:176
msgid "Invalid passphrase; please try again ...\n"
msgstr "Ungültiges Mantra; versuchen Sie's doch noch einmal ...\n"
#: g10/seckey-cert.c:223
msgid "WARNING: Weak key detected - please change passphrase again.\n"
msgstr ""
"WARNUNG: Unsicherer Schlüssel entdeckt -\n"
-" bitte das Mantra nochmal eingeben.\n"
+" bitte Mantra nochmals wechseln.\n"
-#: g10/sig-check.c:195
+#: g10/sig-check.c:155
msgid ""
"this is a PGP generated ElGamal key which is NOT secure for signatures!\n"
msgstr ""
"Dieser durch PGP erzeugte ElGamal-Schlüssel ist für Signaturen NICHT sicher "
"genug!\n"
-#: g10/sig-check.c:203
-#, fuzzy, c-format
+#: g10/sig-check.c:163
+#, c-format
msgid "public key is %lu second newer than the signature\n"
-msgstr "lid %lu: User-ID ohne Signatur\n"
+msgstr "Öffentlicher Schlüssel ist um %lu Sekunde jünger als die Unterschrift\n"
-#: g10/sig-check.c:204
-#, fuzzy, c-format
+#: g10/sig-check.c:164
+#, c-format
msgid "public key is %lu seconds newer than the signature\n"
-msgstr "lid %lu: User-ID ohne Signatur\n"
+msgstr "Öffentlicher Schlüssel ist um %lu Sekunden jünger als die Unterschrift\n"
-#: g10/sig-check.c:220
+#: g10/sig-check.c:180
#, c-format
msgid "NOTE: signature key expired %s\n"
msgstr "Hinweis: Schlüssel der Signatur ist verfallen am %s.\n"
-#: g10/sig-check.c:277
+#: g10/sig-check.c:237
msgid "assuming bad signature due to an unknown critical bit\n"
msgstr ""
"Vermutlich eine FALSCHE Unterschrift, wegen unbekanntem \"critical bit\"\n"
#: g10/sign.c:79
#, c-format
msgid "%s signature from: %s\n"
msgstr "%s Unterschrift von: %s\n"
-#: g10/sign.c:210 g10/sign.c:493
+#: g10/sign.c:210 g10/sign.c:596
#, c-format
msgid "can't create %s: %s\n"
msgstr "%s kann nicht erzeugt werden: %s\n"
#: g10/sign.c:306
msgid "signing:"
msgstr "unterschreibe:"
#: g10/sign.c:346
#, c-format
msgid "WARNING: `%s' is an empty file\n"
msgstr "WARNUNG: '%s' ist eine leere Datei.\n"
-#: g10/textfilter.c:122
+#: g10/textfilter.c:199
#, c-format
msgid "can't handle text lines longer than %d characters\n"
-msgstr ""
-
-#: g10/textfilter.c:189
-#, c-format
-msgid "input line longer than %d characters\n"
-msgstr ""
+msgstr "Textzeilen länger als %d Zeichen können nicht benutzt werden\n"
#: g10/tdbio.c:117 g10/tdbio.c:1448
#, c-format
msgid "trustdb rec %lu: lseek failed: %s\n"
msgstr "trustdb Satz %lu: lseek fehlgeschlagen: %s\n"
#: g10/tdbio.c:123 g10/tdbio.c:1455
#, c-format
msgid "trustdb rec %lu: write failed (n=%d): %s\n"
msgstr "trustdb Satz %lu: write fehlgeschlagen (n=%d): %s\n"
#: g10/tdbio.c:233
msgid "trustdb transaction too large\n"
msgstr "trustdb Transaktion zu groß\n"
#: g10/tdbio.c:424
#, c-format
msgid "%s: can't access: %s\n"
msgstr "%s: kann nicht zugegriffen werden: %s\n"
-#: g10/ringedit.c:296 g10/tdbio.c:444
+#: g10/ringedit.c:294 g10/tdbio.c:444
#, c-format
msgid "%s: can't create directory: %s\n"
msgstr "%s: Verzeichnis kann nicht erzeugt werden: %s\n"
-#: g10/ringedit.c:302 g10/tdbio.c:447
+#: g10/ringedit.c:300 g10/tdbio.c:447
#, c-format
msgid "%s: directory created\n"
msgstr "%s: Verzeichnis erzeugt\n"
#: g10/tdbio.c:451
#, c-format
msgid "%s: directory does not exist!\n"
msgstr "%s: Verzeichnis existiert nicht!\n"
-#: g10/openfile.c:111 g10/openfile.c:181 g10/ringedit.c:1325 g10/tdbio.c:457
+#: g10/openfile.c:109 g10/openfile.c:176 g10/ringedit.c:1310 g10/tdbio.c:457
#, c-format
msgid "%s: can't create: %s\n"
msgstr "%s: kann nicht erzeugt werden: %s\n"
#: g10/tdbio.c:472 g10/tdbio.c:520
-#, fuzzy, c-format
+#, c-format
msgid "%s: can't create lock\n"
-msgstr "%s: kann nicht erzeugt werden: %s\n"
+msgstr "%s: Sperre kann nicht erzeugt werden\n"
#: g10/tdbio.c:486
#, c-format
msgid "%s: failed to create version record: %s"
msgstr "%s: Fehler beim Erzeugen des Versionsatzes: %s"
#: g10/tdbio.c:490
#, c-format
msgid "%s: invalid trustdb created\n"
msgstr "%s: ungültige trust-db erzeugt\n"
#: g10/tdbio.c:492
#, c-format
msgid "%s: trustdb created\n"
msgstr "%s: trust-db erzeugt\n"
#: g10/tdbio.c:529
#, c-format
msgid "%s: invalid trustdb\n"
msgstr "%s: ungültige 'Trust'-Datenbank\n"
#: g10/tdbio.c:562
#, c-format
msgid "%s: failed to create hashtable: %s\n"
msgstr "%s: hashtable kann nicht erzeugt werden: %s\n"
#: g10/tdbio.c:570
#, c-format
msgid "%s: error updating version record: %s\n"
msgstr "%s: Fehler beim Ändern des Versionsatzes: %s\n"
#: g10/tdbio.c:586 g10/tdbio.c:625 g10/tdbio.c:650 g10/tdbio.c:1381
#: g10/tdbio.c:1408
#, c-format
msgid "%s: error reading version record: %s\n"
msgstr "%s: Fehler beim Lesen des Versionsatzes: %s\n"
#: g10/tdbio.c:599
#, c-format
msgid "%s: error writing version record: %s\n"
msgstr "%s: Fehler beim Schreiben des Versionsatzes: %s\n"
#: g10/tdbio.c:1077
#, c-format
msgid "trustdb: lseek failed: %s\n"
msgstr "trustdb: lseek fehlgeschlagen: %s\n"
#: g10/tdbio.c:1085
#, c-format
msgid "trustdb: read failed (n=%d): %s\n"
msgstr "trustdb: read failed (n=%d): %s\n"
#: g10/tdbio.c:1106
#, c-format
msgid "%s: not a trustdb file\n"
msgstr "%s: keine trustdb Datei\n"
#: g10/tdbio.c:1122
#, c-format
msgid "%s: version record with recnum %lu\n"
msgstr "%s: version record with recnum %lu\n"
#: g10/tdbio.c:1127
#, c-format
msgid "%s: invalid file version %d\n"
msgstr "%s: invalid file version %d\n"
#: g10/tdbio.c:1414
#, c-format
msgid "%s: error reading free record: %s\n"
msgstr "%s: Fehler beim Lesen eines freien Satzes: %s\n"
#: g10/tdbio.c:1422
#, c-format
msgid "%s: error writing dir record: %s\n"
msgstr "%s: Fehler beim Schreiben eines Verzeichnis-Satzes: %s\n"
#: g10/tdbio.c:1432
#, c-format
msgid "%s: failed to zero a record: %s\n"
msgstr "%s: konnte einen Satz nicht Nullen: %s\n"
#: g10/tdbio.c:1462
#, c-format
msgid "%s: failed to append a record: %s\n"
msgstr "%s: konnte Satz nicht anhängen: %s\n"
-#: g10/trustdb.c:165
+#: g10/trustdb.c:144
msgid "The trustdb is corrupted; please run \"gpgm --fix-trustdb\".\n"
msgstr ""
"Die \"Trust\"-Datenbank ist beschädigt; verwenden Sie \"gpgm "
"--fix-trustdb\".\n"
-#: g10/trustdb.c:178
+#: g10/trustdb.c:157
#, c-format
msgid "trust record %lu, req type %d: read failed: %s\n"
msgstr "trust record %lu, req type %d: read failed: %s\n"
-#: g10/trustdb.c:193
+#: g10/trustdb.c:172
#, c-format
msgid "trust record %lu, type %d: write failed: %s\n"
msgstr "trust record %lu, type %d: write failed: %s\n"
-#: g10/trustdb.c:207
+#: g10/trustdb.c:186
#, c-format
msgid "trust record %lu: delete failed: %s\n"
msgstr "Vertrauenssatz %lu: löschen fehlgeschlagen: %s\n"
-#: g10/trustdb.c:221
+#: g10/trustdb.c:200
#, c-format
msgid "trustdb: sync failed: %s\n"
msgstr "\"Trust-DB\": sync fehlgeschlagen: %s\n"
-#: g10/trustdb.c:351
+#: g10/trustdb.c:329
#, c-format
msgid "error reading dir record for LID %lu: %s\n"
msgstr "Fehler beim Lesen des Dir-Satzes für LID %lu: %s\n"
-#: g10/trustdb.c:358
+#: g10/trustdb.c:336
#, c-format
msgid "lid %lu: expected dir record, got type %d\n"
msgstr "lid %lu: Dir-Satz erwartet, aber es kam Typ %d\n"
-#: g10/trustdb.c:363
+#: g10/trustdb.c:341
#, c-format
msgid "no primary key for LID %lu\n"
msgstr "Kein Hauptschlüssel für LID %lu\n"
-#: g10/trustdb.c:368
+#: g10/trustdb.c:346
#, c-format
msgid "error reading primary key for LID %lu: %s\n"
msgstr "Fehler beim Lesen den Hauptschlüssels der LID %lu: %s\n"
-#: g10/trustdb.c:445
+#: g10/trustdb.c:422
#, c-format
msgid "chained sigrec %lu has a wrong owner\n"
msgstr "Verketteter Signatursatz %lu hat einen falschen Besitzer\n"
-#: g10/trustdb.c:488
+#: g10/trustdb.c:465
#, c-format
msgid "'%s' is not a valid long keyID\n"
msgstr "'%s' ist keine gültige lange Schlüssel-ID\n"
-#: g10/trustdb.c:523
+#: g10/trustdb.c:500
#, c-format
msgid "key %08lX: no public key for trusted key - skipped\n"
msgstr ""
"Schlüssel %08lX: kein öffentlicher Schüssel für vertrauenswürdigen Schlüssel "
"- übersprungen\n"
-#: g10/trustdb.c:532 g10/trustdb.c:590
+#: g10/trustdb.c:509 g10/trustdb.c:567
#, c-format
msgid "key %08lX: can't put it into the trustdb\n"
msgstr "Schlüssel %08lX kann nicht in die \"trustdb\" eingefügt werden\n"
-#: g10/trustdb.c:537 g10/trustdb.c:596
+#: g10/trustdb.c:514 g10/trustdb.c:573
#, c-format
msgid "key %08lX: query record failed\n"
msgstr "Schlüssel %08lX: Satzabfrage fehlgeschlagen\n"
-#: g10/trustdb.c:542 g10/trustdb.c:605
+#: g10/trustdb.c:519 g10/trustdb.c:582
#, c-format
msgid "key %08lX: already in trusted key table\n"
msgstr "Schlüssel %08lX: Ist bereits in geheimer Schlüsseltabelle\n"
-#: g10/trustdb.c:545 g10/trustdb.c:608
+#: g10/trustdb.c:522 g10/trustdb.c:585
#, c-format
msgid "key %08lX: accepted as trusted key.\n"
msgstr "Schlüssel %08lX: Akzeptiert als vertrauenswürdiger Schlüssel.\n"
-#: g10/trustdb.c:561
+#: g10/trustdb.c:538
#, c-format
msgid "NOTE: secret key %08lX is NOT protected.\n"
msgstr "HINWEIS: Geheimer Schlüssel %08lX ist NICHT geschützt.\n"
-#: g10/trustdb.c:573
+#: g10/trustdb.c:550
#, c-format
msgid "key %08lX: secret key without public key - skipped\n"
msgstr ""
"Schlüssel %08lX: geheimer Schlüssel, aber ohne öffentlichen Schlüssel - "
"übersprungen\n"
-#: g10/trustdb.c:580
+#: g10/trustdb.c:557
#, c-format
msgid "key %08lX: secret and public key don't match\n"
msgstr ""
"Schlüssel %08lX: geheimer und öffentlicher Schlüssel passen nicht zusammen.\n"
-#: g10/trustdb.c:616
+#: g10/trustdb.c:593
#, c-format
msgid "enumerate secret keys failed: %s\n"
msgstr "enum_secret_keys fehlgeschlagen: %s\n"
-#: g10/trustdb.c:770
+#: g10/trustdb.c:776
#, c-format
msgid "lid %lu: read dir record failed: %s\n"
msgstr "lid %lu: Lesen des Verz.Satzes fehlgeschlagen: %s\n"
-#: g10/trustdb.c:779
+#: g10/trustdb.c:785
#, c-format
msgid "lid %lu: read key record failed: %s\n"
msgstr "lid %lu: Lesen des Schl..Satzes fehlgeschlagen: %s\n"
-#: g10/trustdb.c:789
+#: g10/trustdb.c:795
#, c-format
msgid "lid %lu: read uid record failed: %s\n"
msgstr "lid %lu: Lesen des UserID-Satzes fehlgeschlagen: %s\n"
-#: g10/trustdb.c:798
+#: g10/trustdb.c:804
#, c-format
msgid "lid %lu: read pref record failed: %s\n"
msgstr "lid %lu: Lesen des Pref.Satzes fehlgeschlagen: %s\n"
-#: g10/trustdb.c:808
+#: g10/trustdb.c:814
#, c-format
msgid "lid %lu: read sig record failed: %s\n"
msgstr "lid %lu: Lesen des Sig.Satzes fehlgeschlagen: %s\n"
-#: g10/trustdb.c:1037
+#: g10/trustdb.c:1151
msgid "Ooops, no keys\n"
msgstr "Huch, keine Schlüssel\n"
-#: g10/trustdb.c:1041
+#: g10/trustdb.c:1155
msgid "Ooops, no user ids\n"
msgstr "Huch, keine User-IDs\n"
-#: g10/trustdb.c:1134 g10/trustdb.c:1152
+#: g10/trustdb.c:1226 g10/trustdb.c:1244
#, c-format
msgid "user '%s' read problem: %s\n"
msgstr "User '%s' Leseproblem: %s\n"
-#: g10/trustdb.c:1137 g10/trustdb.c:1155
+#: g10/trustdb.c:1229 g10/trustdb.c:1247
#, c-format
msgid "user '%s' list problem: %s\n"
msgstr "User '%s' Listenproblem: %s\n"
-#: g10/trustdb.c:1145 g10/trustdb.c:1447
+#: g10/trustdb.c:1237 g10/trustdb.c:1485
#, c-format
msgid "user '%s' not found: %s\n"
msgstr "Benutzer '%s' nicht gefunden: %s\n"
-#: g10/trustdb.c:1147 g10/trustdb.c:1449
+#: g10/trustdb.c:1239 g10/trustdb.c:1487
#, c-format
msgid "problem finding '%s' in trustdb: %s\n"
msgstr "Problem, '%s' in der Trust-DB zu finden: %s\n"
-#: g10/trustdb.c:1150
+#: g10/trustdb.c:1242
#, c-format
msgid "user '%s' not in trustdb\n"
msgstr "User '%s' ist nicht in der trustdb\n"
-#: g10/trustdb.c:1186
+#: g10/trustdb.c:1277
#, c-format
msgid ""
"# List of assigned trustvalues, created %s\n"
"# (Use \"gpgm --import-ownertrust\" to restore them)\n"
msgstr ""
"# Liste der zugewisenen \"trustvalues\", erzeugt am %s\n"
"# (Verwenden Sie \"gpgm --import-ownertrust\" um sie wieder einzuspielen)\n"
-#: g10/trustdb.c:1192
+#: g10/trustdb.c:1283
msgid "directory record w/o primary key\n"
msgstr "Verzeichnis-Satz ohne Hauptschlüssel\n"
-#: g10/trustdb.c:1199
+#: g10/trustdb.c:1290
#, c-format
msgid "error reading key record: %s\n"
msgstr "Fehler beim Lesen des Schl.Satzes: %s\n"
-#: g10/trustdb.c:1240
+#: g10/trustdb.c:1330
msgid "line too long\n"
msgstr "Zeile zu lang\n"
-#: g10/trustdb.c:1248
+#: g10/trustdb.c:1338
msgid "error: missing colon\n"
msgstr "Fehler: Fehlender Doppelpunkt\n"
-#: g10/trustdb.c:1253
+#: g10/trustdb.c:1343
msgid "error: invalid fingerprint\n"
msgstr "Fehler: ungültiger Fingerabdruck\n"
-#: g10/trustdb.c:1257
+#: g10/trustdb.c:1347
msgid "error: no ownertrust value\n"
msgstr "Fehler: Keine \"Owner trust\" Werte\n"
-#: g10/trustdb.c:1282
+#: g10/trustdb.c:1372
msgid "key not in trustdb, searching ring.\n"
msgstr "Schlüssel ist nicht in der trustdb, Schl.bund wird durchsucht.\n"
-#: g10/trustdb.c:1285
+#: g10/trustdb.c:1375
#, c-format
msgid "key not in ring: %s\n"
msgstr "Schlüssel ist nicht im Schlüsselbund: %s\n"
-#: g10/trustdb.c:1289
+#: g10/trustdb.c:1379
msgid "Oops: key is now in trustdb???\n"
msgstr "Huch: Schlüssel ist ja gar nicht in der Trust-DB?\n"
#. update the ownertrust
-#: g10/trustdb.c:1294
+#: g10/trustdb.c:1384
#, c-format
msgid "insert trust record failed: %s\n"
msgstr "'trust record' einfügen fehlgeschlagen: %s\n"
#. error
-#: g10/trustdb.c:1300
+#: g10/trustdb.c:1390
#, c-format
msgid "error finding dir record: %s\n"
msgstr "Fehler beim Auffinden des Verz.Satzes: %s\n"
-#: g10/trustdb.c:1452
+#: g10/trustdb.c:1490
#, c-format
msgid "user '%s' not in trustdb - inserting\n"
msgstr "User '%s' ist nicht in der 'Trust'-Datenbank - wird eingefügt\n"
-#: g10/trustdb.c:1455
+#: g10/trustdb.c:1493
#, c-format
msgid "failed to put '%s' into trustdb: %s\n"
msgstr "konnte '%s' nicht in die 'Trust'-Datenbank hineintun: %s\n"
-#: g10/trustdb.c:1494
+#: g10/trustdb.c:1565
#, c-format
msgid "%s: keyblock read problem: %s\n"
msgstr "%s: Schlüsselblock Leseproblem: %s\n"
-#: g10/trustdb.c:1508
+#: g10/trustdb.c:1579
#, c-format
msgid "%s: update failed: %s\n"
msgstr "%s: Änderung fehlgeschlagen: %s\n"
-#: g10/trustdb.c:1511
+#: g10/trustdb.c:1582
#, c-format
msgid "%s: updated\n"
msgstr "%s: geändert\n"
-#: g10/trustdb.c:1513
+#: g10/trustdb.c:1584
#, c-format
msgid "%s: okay\n"
msgstr "%s: In Ordnung\n"
-#: g10/trustdb.c:1528
+#: g10/trustdb.c:1599
#, c-format
msgid "lid %lu: dir record w/o key - skipped\n"
msgstr "lid %lu: Dir-Satz ohne Schlüssel - übergangen\n"
-#: g10/trustdb.c:1541
+#: g10/trustdb.c:1612
#, c-format
msgid "lid %lu: keyblock not found: %s\n"
msgstr "lid %lu: Schlüsselblock nicht gefunden: %s\n"
-#: g10/trustdb.c:1550 g10/trustdb.c:1623
+#: g10/trustdb.c:1621 g10/trustdb.c:1690
#, c-format
msgid "lid %lu: update failed: %s\n"
msgstr "lid %lu: Änderung fehlgeschlagen: %s\n"
-#: g10/trustdb.c:1556 g10/trustdb.c:1629
+#: g10/trustdb.c:1627 g10/trustdb.c:1696
#, c-format
msgid "lid %lu: updated\n"
msgstr "lid %lu: geändert\n"
-#: g10/trustdb.c:1560 g10/trustdb.c:1633
+#: g10/trustdb.c:1631 g10/trustdb.c:1700
#, c-format
msgid "lid %lu: okay\n"
msgstr "lid %lu: In Ordnung\n"
-#: g10/trustdb.c:1567 g10/trustdb.c:1639
+#: g10/trustdb.c:1638 g10/trustdb.c:1706
#, c-format
msgid "%lu keys processed\n"
msgstr "%lu Schlüssel bearbeitet\n"
-#: g10/trustdb.c:1569
+#: g10/trustdb.c:1640
#, c-format
msgid "\t%lu keys skipped\n"
msgstr "\t%lu Schlüssel übersprungen\n"
-#: g10/trustdb.c:1571 g10/trustdb.c:1641
+#: g10/trustdb.c:1642 g10/trustdb.c:1708
#, c-format
msgid "\t%lu keys with errors\n"
msgstr "\t%lu Schlüssel mit Fehlern\n"
-#: g10/trustdb.c:1573 g10/trustdb.c:1643
+#: g10/trustdb.c:1644 g10/trustdb.c:1710
#, c-format
msgid "\t%lu keys updated\n"
msgstr "\t%lu Schlüssel geändert\n"
-#: g10/trustdb.c:1607
+#: g10/trustdb.c:1674
#, c-format
msgid "lid ?: insert failed: %s\n"
msgstr "lid ?: Einfügen fehlgeschlagen: %s\n"
-#: g10/trustdb.c:1612
+#: g10/trustdb.c:1679
#, c-format
msgid "lid %lu: insert failed: %s\n"
msgstr "lid %lu: Einfügen fehlgeschlagen: %s\n"
-#: g10/trustdb.c:1618
+#: g10/trustdb.c:1685
#, c-format
msgid "lid %lu: inserted\n"
msgstr "lid %lu: eingefügt\n"
-#: g10/trustdb.c:1645
+#: g10/trustdb.c:1712
#, c-format
msgid "\t%lu keys inserted\n"
msgstr "\t%lu Schlüssel eingefügt\n"
-#: g10/trustdb.c:1648
+#: g10/trustdb.c:1715
#, c-format
msgid "enumerate keyblocks failed: %s\n"
msgstr "enumerate Schlüsselblock fehlgeschlagen: %s\n"
-#: g10/trustdb.c:1694
+#: g10/trustdb.c:1760
#, c-format
msgid "check_trust: search dir record failed: %s\n"
msgstr "check_trust: Suche nach Dir-Satz fehlgeschlagen: %s\n"
-#: g10/trustdb.c:1701
+#: g10/trustdb.c:1767
#, c-format
msgid "key %08lX: insert trust record failed: %s\n"
msgstr "Schlüssel %08lX: 'trust record' einfügen fehlgeschlagen: %s\n"
-#: g10/trustdb.c:1705
+#: g10/trustdb.c:1771
#, c-format
msgid "key %08lX.%lu: inserted into trustdb\n"
msgstr "Schlüssel %08lX.%lu: in \"trustdb\" eingefügt\n"
-#: g10/trustdb.c:1713
+#: g10/trustdb.c:1779
#, c-format
msgid "key %08lX.%lu: created in future (time warp or clock problem)\n"
msgstr ""
"Schlüssel %08lX.%lu: wurde in der Zukunft erzeugt (Zeitreise oder Uhren "
"stimmen nicht überein)\n"
-#: g10/trustdb.c:1720
+#: g10/trustdb.c:1786
#, c-format
msgid "key %08lX.%lu: expired at %s\n"
msgstr "Schlüssel %08lX.%lu: verfallen am %s\n"
-#: g10/trustdb.c:1728
+#: g10/trustdb.c:1794
#, c-format
msgid "key %08lX.%lu: trust check failed: %s\n"
msgstr "Schlüssel %08lX.%lu: Vertrauensprüfung fehlgeschlagen: %s\n"
-#: g10/trustdb.c:1951 g10/trustdb.c:1981 g10/trustdb.c:2734
+#: g10/trustdb.c:2003 g10/trustdb.c:2032 g10/trustdb.c:2771
msgid "WARNING: can't yet handle long pref records\n"
msgstr "WARNUNG: Lange 'Pref'-Records können noch nicht benutzt werden\n"
-#: g10/trustdb.c:2003
+#: g10/trustdb.c:2054
#, c-format
msgid "get_dir_record: search_record failed: %s\n"
msgstr "get_dir_record: search_record fehlgeschlagen: %s\n"
-#: g10/trustdb.c:2071
+#: g10/trustdb.c:2117
#, c-format
msgid "NOTE: sig rec %lu[%d] in hintlist of %lu but marked as checked\n"
msgstr "Hinweis: sig rec %lu[%d] in hintlist of %lu but marked as checked\n"
-#: g10/trustdb.c:2075
+#: g10/trustdb.c:2121
#, c-format
msgid "NOTE: sig rec %lu[%d] in hintlist of %lu but not marked\n"
msgstr "Hinweis: sig rec %lu[%d] in hintlist of %lu but not marked\n"
#. we need the dir record
-#: g10/trustdb.c:2082
+#: g10/trustdb.c:2128
#, c-format
msgid "sig rec %lu[%d] in hintlist of %lu does not point to a dir record\n"
msgstr "sig rec %lu[%d] in hintlist of %lu does not point to a dir record\n"
-#: g10/trustdb.c:2088
+#: g10/trustdb.c:2134
#, c-format
msgid "lid %lu: no primary key\n"
msgstr "lid %lu: kein Hauptschlüssel\n"
-#: g10/trustdb.c:2121
+#: g10/trustdb.c:2167
#, c-format
msgid "lid %lu: user id not found in keyblock\n"
msgstr "lid %lu: User-ID im Schlüsselblock nicht gefunden\n"
-#: g10/trustdb.c:2125
+#: g10/trustdb.c:2171
#, c-format
msgid "lid %lu: user id without signature\n"
msgstr "lid %lu: User-ID ohne Signatur\n"
-#: g10/trustdb.c:2132
+#: g10/trustdb.c:2178
#, c-format
msgid "lid %lu: self-signature in hintlist\n"
msgstr "lid %lu: Eigenbeglaubigung in 'hintlist'\n"
-#: g10/trustdb.c:2143 g10/trustdb.c:2879 g10/trustdb.c:2962
+#: g10/trustdb.c:2189 g10/trustdb.c:2910 g10/trustdb.c:2994
msgid "Valid certificate revocation"
msgstr "Gültiger Zerifikat-Widerruf"
-#: g10/trustdb.c:2144 g10/trustdb.c:2880 g10/trustdb.c:2963
+#: g10/trustdb.c:2190 g10/trustdb.c:2911 g10/trustdb.c:2995
msgid "Good certificate"
msgstr "Korrektes Zertifikat"
-#: g10/trustdb.c:2153
+#: g10/trustdb.c:2199
msgid "very strange: no public key\n"
msgstr "sehr seltsam: kein öffentlicher Schlüssel\n"
-#: g10/trustdb.c:2201
+#: g10/trustdb.c:2247
#, c-format
msgid "hintlist %lu[%d] of %lu does not point to a dir record\n"
msgstr "hintlist %lu[%d] of %lu zeigt nicht auf einen 'dir record'\n"
-#: g10/trustdb.c:2207
+#: g10/trustdb.c:2253
#, c-format
msgid "lid %lu does not have a key\n"
msgstr "lid %lu hat keinen Schlüssel\n"
-#: g10/trustdb.c:2217
+#: g10/trustdb.c:2263
#, c-format
msgid "lid %lu: can't get keyblock: %s\n"
msgstr "lid %lu: Schlüsselblock nicht verfügbar: %s\n"
-#: g10/trustdb.c:2274 g10/trustdb.c:3227
+#: g10/trustdb.c:2320 g10/trustdb.c:3245
#, c-format
msgid "tdbio_search_dir failed: %s\n"
msgstr "tdbio_search_dir fehlgeschlagen: %s\n"
-#: g10/trustdb.c:2427
+#: g10/trustdb.c:2473
#, c-format
msgid "key %08lX.%lu: Good subkey binding\n"
msgstr "Schlüssel %08lX.%lu: Korrekte Unterschlüssel-Anbindung\n"
-#: g10/trustdb.c:2433 g10/trustdb.c:2475
+#: g10/trustdb.c:2479 g10/trustdb.c:2521
#, c-format
msgid "key %08lX.%lu: Invalid subkey binding: %s\n"
msgstr "Schlüssel %08lX.%lu: Ungültige Unterschlüssel-Anbindung\n"
-#: g10/trustdb.c:2448
+#: g10/trustdb.c:2494
#, c-format
msgid "key %08lX.%lu: Valid key revocation\n"
msgstr "Schlüssel %08lX.%lu: Gültiger Schlüsselwiderruf\n"
-#: g10/trustdb.c:2454
+#: g10/trustdb.c:2500
#, c-format
msgid "key %08lX.%lu: Invalid key revocation: %s\n"
msgstr "Schlüssel %08lX.%lu: Ungültiger Schlüsselwiderruf: %s\n"
-#: g10/trustdb.c:2469
+#: g10/trustdb.c:2515
#, c-format
msgid "key %08lX.%lu: Valid subkey revocation\n"
msgstr "Schlüssel %08lX.%lu: Gültiger Unterschlüsselwiderruf\n"
-#: g10/trustdb.c:2573
+#: g10/trustdb.c:2615
msgid "Good self-signature"
msgstr "Korrekte Eigenbeglaubigung"
-#: g10/trustdb.c:2584
+#: g10/trustdb.c:2626
msgid "Invalid self-signature"
msgstr "Ungültige Eigenbeglaubigung"
-#: g10/trustdb.c:2594
+#: g10/trustdb.c:2636
msgid "Valid user ID revocation skipped due to a newer self signature\n"
msgstr ""
"Gültiger User-ID-Widerruf ignoriert, da eine neuere Eigenbeglaubigung "
"vorliegt\n"
-#: g10/trustdb.c:2601
+#: g10/trustdb.c:2643
msgid "Valid user ID revocation\n"
msgstr "Gültiger User-ID-Widerruf\n"
-#: g10/trustdb.c:2608
+#: g10/trustdb.c:2650
msgid "Invalid user ID revocation"
msgstr "Ungültiger User-ID-Widerruf"
-#: g10/trustdb.c:2697
+#: g10/trustdb.c:2734
msgid "Too many preferences"
msgstr "Zu viele Einstellungen"
-#: g10/trustdb.c:2711
+#: g10/trustdb.c:2748
msgid "Too many preference items"
msgstr "Zu viele Angaben zur Bevorzugung"
-#: g10/trustdb.c:2857
-#, fuzzy
+#: g10/trustdb.c:2888
msgid "duplicated certificate - deleted"
msgstr "Doppelte Zertifikate - entfernt"
-#: g10/trustdb.c:2891
+#: g10/trustdb.c:2922
msgid "Hmmm, public key lost?"
msgstr "Hmmm, öffentlicher Schüssel verloren?"
-#: g10/trustdb.c:2900 g10/trustdb.c:2983
+#: g10/trustdb.c:2932 g10/trustdb.c:3015
msgid "Invalid certificate revocation"
msgstr "Ungültiger Zertifikatswiderruf"
-#: g10/trustdb.c:2901 g10/trustdb.c:2984
+#: g10/trustdb.c:2933 g10/trustdb.c:3016
msgid "Invalid certificate"
msgstr "Ungültiges Zertifikat"
-#: g10/trustdb.c:2916
+#: g10/trustdb.c:2948
#, c-format
msgid "uid %08lX.%lu/%02X%02X: has shadow dir %lu but is not yet marked.\n"
msgstr ""
"uid %08lX.%lu/%02X%02X: hat \"shadow-dir\" %lu, aber ist noch nicht "
"markiert.\n"
-#: g10/trustdb.c:2930
+#: g10/trustdb.c:2962
#, c-format
msgid "sig record %lu[%d] points to wrong record.\n"
msgstr "Signatursatz %lu[%d] zeigt auf falschen Satz.\n"
#. that should never happen
-#: g10/trustdb.c:3190
+#: g10/trustdb.c:3215
#, c-format
msgid "insert_trust_record: keyblock not found: %s\n"
msgstr "insert_trust_record: Schlüsselblock nicht gefunden: %s\n"
-#: g10/trustdb.c:3215
+#: g10/trustdb.c:3233
msgid "did not use primary key for insert_trust_record()\n"
msgstr "Für insert_trust_record() wurde nicht der Hauptschlüssel benutzt\n"
-#: g10/ringedit.c:316
+#: g10/ringedit.c:314
#, c-format
msgid "%s: can't create keyring: %s\n"
msgstr "%s: Schlüsselbund kann nicht erzeugt werden: %s\n"
-#: g10/ringedit.c:322 g10/ringedit.c:1330
+#: g10/ringedit.c:320 g10/ringedit.c:1315
#, c-format
msgid "%s: keyring created\n"
msgstr "%s: Schlüsselbund erstellt\n"
-#: g10/ringedit.c:1507
+#: g10/ringedit.c:1492
msgid "WARNING: 2 files with confidential information exists.\n"
msgstr "Warnung: Zwei Dateien mit vertraulichem Inhalt vorhanden.\n"
-#: g10/ringedit.c:1508
+#: g10/ringedit.c:1493
#, c-format
msgid "%s is the unchanged one\n"
msgstr "%s ist der Unveränderte\n"
-#: g10/ringedit.c:1509
+#: g10/ringedit.c:1494
#, c-format
msgid "%s is the new one\n"
msgstr "%s ist der Neue\n"
-#: g10/ringedit.c:1510
+#: g10/ringedit.c:1495
msgid "Please fix this possible security flaw\n"
msgstr "Bitte diesen potentiellen Sicherheitsmangel beseitigen\n"
#: g10/skclist.c:88 g10/skclist.c:125
msgid "key is not flagged as insecure - can't use it with the faked RNG!\n"
msgstr ""
+"Schlüssel ist nicht als unsicher gekennzeichnet - er ist mit dem\n"
+"angetäuschten Zufallsgenerator nicht verwendbar\n"
+
#: g10/skclist.c:113
#, c-format
msgid "skipped `%s': %s\n"
msgstr "übersprungen '%s': %s\n"
#: g10/skclist.c:119
#, c-format
msgid ""
"skipped `%s': this is a PGP generated ElGamal key which is not secure for "
"signatures!\n"
msgstr ""
"'%s übersprungen: Dies ist ein durch PGP erzeugter ElGamal-Schlüssel. Das "
"ist für Signaturen NICHT sicher genug!\n"
#. do not overwrite
#: g10/openfile.c:63
#, c-format
msgid "File `%s' exists. "
msgstr "Datei '%s' existiert bereits. "
#: g10/openfile.c:65
msgid "Overwrite (y/N)? "
msgstr "Überschreiben (j/N)? "
#: g10/openfile.c:90
msgid "writing to stdout\n"
msgstr "Schreiben auf die Standardausgabe\n"
-#: g10/openfile.c:147
+#: g10/openfile.c:145
#, c-format
msgid "assuming signed data in `%s'\n"
msgstr "die unterzeichneten Daten sind wohl in '%s'\n"
-#: g10/openfile.c:197
+#: g10/openfile.c:192
#, c-format
msgid "%s: new options file created\n"
msgstr "%s: neue Optionendatei erstellt\n"
#: g10/encr-data.c:59
#, c-format
msgid "%s encrypted data\n"
msgstr "%s verschlüsselte Daten\n"
#: g10/encr-data.c:61
#, c-format
msgid "encrypted with unknown algorithm %d\n"
msgstr "Mit unbekanntem Verfahren verschlüsselt %d\n"
#: g10/encr-data.c:74
msgid ""
"WARNING: message was encrypted with a weak key in the symmetric cipher.\n"
msgstr ""
"Warnung: Botschaft wurde mit einem unsicheren Schlüssel verschlüsselt.\n"
#: g10/seskey.c:52
msgid "weak key created - retrying\n"
msgstr "Unsicherer Schlüssel erzeugt - neuer Versuch\n"
#: g10/seskey.c:57
#, c-format
msgid "cannot avoid weak key for symmetric cipher; tried %d times!\n"
msgstr ""
"Trotz %d-fachen Versuch konnte die Erzeugung eines unsicheren Schlüssels für "
"sym.Verschlüsselung nicht vermieden werden!\n"
# "It's up to you to assign a value here; this value will never be exported\n"
# "to any 3rd party. We need it to implement the web-of-trust; it has nothing\n"
# "to do with the (implicitly created) web-of-certificates."
#. begin of list
#: g10/helptext.c:48
msgid "edit_ownertrust.value"
msgstr ""
"SIE müssen hier einen Wert eingeben. Dieser Wert wird niemals an eine "
"Dritte\n"
"weitergegeben (exportiert) werden. Wir brauchen ihn zum Aufbau des\n"
"\"web-of-trust\", Er hat nichts mit dem (stillschweigend aufgebautem)\n"
"\"web-of-certificates\" zu tun."
# "If you want to use this revoked key anyway, answer \"yes\"."
#: g10/helptext.c:54
msgid "revoked_key.override"
msgstr ""
"Wenn Sie diesen widerrufenen Schlüssel trotzdem benutzen wollen,\n"
"so antworten Sie mit \"ja\" oder schweigen für immer."
# "If you want to use this untrusted key anyway, answer \"yes\"."
#: g10/helptext.c:58
msgid "untrusted_key.override"
msgstr ""
"Wenn Sie diesen nichtvertruenswürdigen Schlüssel trotzdem benutzen wollen,\n"
"so antworten Sie mit \"ja\" oder schweigen Sie für immer."
# "Enter the user id of the addresse to whom you want to send the message."
#: g10/helptext.c:62
msgid "pklist.user_id.enter"
msgstr ""
"Geben Sie die User-ID dessen ein, an den Sie die Botschaft senden wollen."
#: g10/helptext.c:66
msgid "keygen.algo"
msgstr ""
"Wählen Sie die zu verwendende Methode aus.\n"
"DSA (alias DSS) bedeutet \"digital signature algorithm\" (Digitales\n"
" Unterschrift-Verfahren). Es kann nur zum Unterschreiben und Beglaubigen\n"
" benutzt werden. Dies ist das empfohlene Verfahren, da dessen Überprüfung\n"
" wesentlich schneller abläuft, als die von \"ElGamal\".\n"
"\n"
"ElGamal ist ein Verfahren für Unterschrift, Beglaubigung und "
"Verschlüsselung\n"
" OpenPGP unterscheidet zwischen zwei Arten von ElGamal: eines nur zum\n"
" Unterschreiben/Beglaubigen und eines zusätzlich zum Verschlüsseln.\n"
" Eigentlich sind diese Arten identisch; allerdings müssen einige Parameter\n"
" auf eine besondere Art gewählt werden, um einen sicheren Schlüssel für\n"
" Unterschriften zu erzeugen. Dieses Programm macht dies zwar so, aber "
"andere\n"
" Programme sind nach OpenPGP-Spezifikation nicht verpflichtet die zweite "
"Art\n"
" (die mit zusätzlichem Verschlüsseln) zu verstehen.\n"
"\n"
"Der Hauptschlüssel (\"primary Key\") muß auf jeden Fall zum Unterschreiben "
"fähig\n"
"sein. Deshalb kann ein Nur-Verschlüssel-ElGamal-Schlüssel dafür nicht\n"
"verwendet werden.\n"
"Auch sollte man \"ElGamal in einem v3-Paket\" nicht verwenden, denn solch "
"ein\n"
"Schlüssel ist nicht mit anderen Programmen nach der OpenPGP-Spezifikation\n"
"verträglich."
# 0.9.0: Although these keys are defined in RFC2440 they are not suggested\n"
# because they are not supported by all programs and signatures created\n"
# with them are quite large and very slow to verify."
#: g10/helptext.c:82
msgid "keygen.algo.elg_se"
msgstr ""
"Obwohl diese Schlüssel in RFC 2440 definiert sind, ist ihre Verwendung "
"nicht\n"
"empfohlen. Sie werden nämlich nicht von allen Programmen unterstützt.\n"
"Außerdem sind damit ezeugte Unterschriften recht groß und die Überprüfung\n"
"ist langsam."
# "Enter the size of the key"
#: g10/helptext.c:89
msgid "keygen.size"
msgstr ""
"Wählen Sie die gewünschte Schlüssellänge.\n"
"\n"
"Ein langer Schlüssel bietet mehr Sicherheit, kostet aber auch mehr "
"Rechenzeit.\n"
"Ein kurzer Schlüssel ist nicht ganz so sicher, wird aber schneller "
"bearbeitet.\n"
"1024 Bit ist für den Heimgebrauch ein brauchbarer Wert. Wenn Sie aber z.B. "
"in\n"
"Atlanta, Georgia, USA für eine Limonandenfabrik arbeiten, und das Rezept\n"
"speichern wollen (\"SCHLEMMER!\"), so wären 2048 Bit kein schlechter Wert."
# "Answer \"yes\" or \"no\""
#: g10/helptext.c:93
msgid "keygen.size.huge.okay"
msgstr "Geben Sie \"Ja\" oder \"Nein\" ein"
#: g10/helptext.c:98
msgid "keygen.size.large.okay"
msgstr "Geben Sie \"Ja\" oder \"Nein\" ein"
#: g10/helptext.c:103
msgid "keygen.valid"
msgstr "Geben Sie den erforderlichen Wert ein"
#: g10/helptext.c:107
msgid "keygen.valid.okay"
msgstr "Geben Sie \"Ja\" oder \"Nein\" ein"
# "Enter the name of the key holder"
#: g10/helptext.c:112
msgid "keygen.name"
msgstr "Geben Sie den Namen des Schlüsselinhabers ein"
# "please enter an optional but highly suggested email address"
#: g10/helptext.c:117
msgid "keygen.email"
msgstr ""
"Geben Sie eine E-Mail-Adresse ein. Dies ist zwar nicht notwendig,\n"
"aber empfehlenswert."
# "Please enter an optional comment"
#: g10/helptext.c:121
msgid "keygen.comment"
msgstr "Geben Sie (bei Bedarf) einen Kommentar ein"
# "N to change the name.\n"
# "C to change the comment.\n"
# "E to change the email address.\n"
# "O to continue with key generation.\n"
# "Q to to quit the key generation."
#: g10/helptext.c:126
msgid "keygen.userid.cmd"
msgstr ""
"N um den Namen zu ändern.\n"
"K um den Kommentar zu ändern.\n"
"E um die E-Mail-Adresse zu ändern.\n"
"F um mit der Schlüsselerzeugung fortzusetzen.\n"
"B um die Schlüsselerzeugung abbrechen."
# "Answer \"yes\" (or just \"y\") if it is okay to generate the sub key."
#: g10/helptext.c:135
msgid "keygen.sub.okay"
msgstr ""
"Geben Sie \"Ja\" (oder nur \"j\") ein, um den Unterschlüssel zu erzeugen."
# "Answer \"yes\" or \"no\""
#: g10/helptext.c:139
msgid "sign_uid.okay"
msgstr "Geben Sie \"Ja\" oder \"Nein\" ein"
# "Answer \"yes\" or \"no\""
#: g10/helptext.c:144
msgid "change_passwd.empty.okay"
msgstr "Geben Sie \"Ja\" oder \"Nein\" ein"
# "Please enter \"help\" to see the list of commands."
#: g10/helptext.c:149
msgid "keyedit.cmd"
msgstr "Geben Sie \"help\" ein, um die Liste der Befehle einzusehen."
# "Answer \"yes\" or \"no\""
#: g10/helptext.c:153
msgid "keyedit.save.okay"
msgstr "Geben Sie \"Ja\" oder \"Nein\" ein"
#: g10/helptext.c:158
msgid "keyedit.cancel.okay"
msgstr "Geben Sie \"Ja\" oder \"Nein\" ein"
# "Answer \"yes\" is you want to sign ALL the user IDs"
#: g10/helptext.c:162
msgid "keyedit.sign_all.okay"
msgstr "Geben Sie \"Ja\" (oder nur \"j\") ein, um alle User-IDs zu beglaubigen"
# "Answer \"yes\" if you really want to delete this user ID.\n"
# "All ceritifcates are then also lost!"
#: g10/helptext.c:166
msgid "keyedit.remove.uid.okay"
msgstr ""
"Geben Sie \"Ja\" (oder nur \"j\") ein, um diese User-ID zu LÖSCHEN.\n"
"Alle Zertifikate werden dann auch weg sein!"
# "Answer \"yes\" if it is okay to delete the subkey"
#: g10/helptext.c:171
msgid "keyedit.remove.subkey.okay"
msgstr ""
"Geben Sie \"Ja\" (oder nur \"j\") ein, um diesen Unterschlüssel zu löschen"
# ################################
# ####### Help msgids ############
# ################################
#: g10/helptext.c:175
msgid "passphrase.enter"
msgstr ""
"Bitte geben Sie das Mantra ein. Dies ist ein geheimer Satz, der aus\n"
"beliebigen Zeichen bestehen kann. Was Sie eingegeben wird nicht angezeigt.\n"
"\n"
"Zur ihrer eigenen Sicherbeit benutzen Sie bitte einen Satz, den sie sich\n"
"gut merken könne, der aber nicht leicht zu erraten ist; Zitate und andere\n"
"bekannte Texte sind eine SCHLECHTE Wahl, da diese mit Sicherheit online\n"
"verfügbar sind und durch entsprechende Programme zum Raten des Mantras\n"
"benutzt werden. Sätze mit persönlicher Bedeutung, die auch noch durch\n"
"falsche Groß-/Kleinschreibung und eingestreute Sonderzeichen verändert "
"werden,\n"
"sind i.d.R. eine gute Wahl"
#: g10/helptext.c:182
msgid "passphrase.repeat"
msgstr ""
"Um sicher zu gehen, daß Sie sich bei der Eingabe des Mantras nicht\n"
"vertippt haben, geben Sie diese bitte nochmal ein. Nur wenn beide Eingaben\n"
"übereinstimmen, wird das Mantra akzeptiert."
# "Give the name fo the file to which the signature applies"
#: g10/helptext.c:186
msgid "detached_signature.filename"
msgstr ""
"Geben Sie den Namen der Datei an, zu dem die abgetrennte Unterschrift gehört"
# "Answer \"yes\" if it is okay to overwrite the file"
#: g10/helptext.c:190
msgid "openfile.overwrite.okay"
msgstr "Geben Sie \"ja\" ein, wenn Sie die Datei überschreiben möchten"
#: g10/helptext.c:204
msgid "No help available"
msgstr "Keine Hilfe vorhanden."
#: g10/helptext.c:216
#, c-format
msgid "No help available for `%s'"
msgstr "Keine Hilfe für '%s' vorhanden."
#~ msgid "use this user-id for encryption"
#~ msgstr "Verschlüsseln für diese User-ID"
#~ msgid "second"
#~ msgstr "Sekunde"
#~ msgid "seconds"
#~ msgstr "Sekunden"
#~ msgid "invalid clear text header: "
#~ msgstr "ungültige Klartexteinleitung"
#~ msgid "LID %lu: changing trust from %u to %u\n"
#~ msgstr "LID %lu: Ändern des 'Trusts' von %u auf %u\n"
#~ msgid "LID %lu: setting trust to %u\n"
#~ msgstr "LID %lu: Setze 'Trust' auf %u\n"
#~ msgid "This key belongs to us (we have the secret key)\n"
#~ msgstr ""
#~ "Dieser Schlüssel gehört uns (alldieweil wir den geheimen Schlüssel dazu "
#~ "haben)\n"
#~ msgid "You will see a list of signators etc. here\n"
#~ msgstr "Sie sollten hier eigentlich eine Liste der Signierer sehen.\n"
#, fuzzy
#~ msgid "key %08lX.%lu, uid %02X%02X, sig %08lX: good signature (3)\n"
#~ msgstr "Schlüssel %08lX: Ungültige Eigenbeglaubigung\n"
#, fuzzy
#~ msgid ""
#~ "key %08lX.%lu, uid %02X%02X, sig %08lX: very strange: no public key\n"
#~ msgstr "Schlüssel %08lX: Keine User-ID für Signatur\n"
#, fuzzy
#~ msgid "key %08lX.%lu, uid %02X%02X, sig %08lX: invalid signature: %s\n"
#~ msgstr "Schlüssel %08lX: Ungültige Eigenbeglaubigung\n"
#, fuzzy
#~ msgid "key %08lX.%lu, uid %02X%02X: good self-signature\n"
#~ msgstr "Schlüssel %08lX: Ungültige Eigenbeglaubigung\n"
#, fuzzy
#~ msgid ""
#~ "key %08lX.%lu, uid %02X%02X, sig %08lX: duplicated signature - deleted\n"
#~ msgstr "Schlüssel %08lX: Ungültige Eigensignatur\n"
#, fuzzy
#~ msgid "key %08lX.%lu, uid %02X%02X, sig %08lX: good signature (1)\n"
#~ msgstr "Schlüssel %08lX: Ungültige Eigensignatur\n"
#, fuzzy
#~ msgid "key %08lX.%lu, uid %02X%02X, sig %08lX: weird: no public key\n"
#~ msgstr "Schlüssel %08lX: Keine User-ID für Signatur\n"
#, fuzzy
#~ msgid "key %08lX.%lu, uid %02X%02X, sig %08lX: good signature (2)\n"
#~ msgstr "Schlüssel %08lX: Ungültige Eigensignatur\n"
#, fuzzy
#~ msgid "key %08lX.%lu, uid %02X%02X, sig %08lX: no public key\n"
#~ msgstr "Schlüssel %08lX: Keine User-ID für Signatur\n"
#~ msgid "key %08lX: already in ultikey_table\n"
#~ msgstr "Schlüssel %08lX: bereits in der Tabelle der geheime Schlüssel\n"
#~ msgid "can't write keyring\n"
#~ msgstr "kann Schlüsselbund nicht schreiben\n"
#~ msgid "make a signature on a key in the keyring"
#~ msgstr "Schlüssel signieren"
#~ msgid "edit a key signature"
#~ msgstr "Bearbeiten der Signaturen eines Schlüssels"
+#~ msgid "do not make any changes"
+#~ msgstr "Keine wirklichen Änderungen durchführen"
+
#~ msgid ""
#~ "It's up to you to assign a value here; this value will never be exported\n"
#~ "to any 3rd party. We need it to implement the web-of-trust; it has nothing\n"
#~ "to do with the (implicitly created) web-of-certificates.\n"
#~ msgstr ""
#~ "Sie müssen selbt entscheiden, welchen Wert Sie hier eintragen; dieser Wert\n"
#~ "wird niemals an eine dritte Seite weitergegeben. Wir brauchen diesen Wert,\n"
#~ "um das \"Netz des Vertrauens\" aufzubauen. Dieses hat nichts mit dem "
#~ "(implizit\n"
#~ "erzeugten) \"Netz der Zertifikate\" zu tun.\n"
#~ msgid "public and secret subkey created.\n"
#~ msgstr "Öffentlicher und geheimer Schlüssel erzeugt.\n"
#~ msgid "No public key for %d signatures\n"
#~ msgstr "Kein öffentlicher Schlüssel für %d Signaturen\n"
#~ msgid "[User name not available] "
#~ msgstr "[Benuzername nicht verfügbar] "
#~ msgid "This is a BAD signature!\n"
#~ msgstr "Dies ist eine FALSCHE Signatur!\n"
#~ msgid "The signature could not be checked!\n"
#~ msgstr "Die Signatur konnte nicht geprüft werden!\n"
#~ msgid "Checking signatures of this public key certificate:\n"
#~ msgstr "Die Signaturen dieses Zertifikats werden überprüft:\n"
#~ msgid "Do you want to remove some of the invalid signatures? "
#~ msgstr "Möchten Sie einige der ungültigen Signaturen entfernen? "
#~ msgid "there is a secret key for this public key!\n"
#~ msgstr ""
#~ "Es gibt einen privaten Schlüssel zu diesem öffentlichen Schlüssel!\n"
#~ msgid "use option \"--delete-secret-key\" to delete it first.\n"
#~ msgstr ""
#~ "Benutzen Sie das Kommando \"--delete-secret-key\", um ihn vorab zu "
#~ "entfernen.\n"
#~ msgid "can't do that in batchmode without \"--yes\"\n"
#~ msgstr "Dies kann im Batchmodus ohne \"--yes\" nicht durchgeführt werden.\n"
#~ msgid "Delete this key from the keyring? "
#~ msgstr "Diesen Schlüssel aus dem Schlüsselbund löschen? "
#~ msgid "This is a secret key! - really delete? "
#~ msgstr "Dies ist ein privater Schlüssel! - Wirklich löschen? "

File Metadata

Mime Type
text/x-diff
Expires
Thu, Oct 16, 4:47 AM (9 h, 50 m)
Storage Engine
local-disk
Storage Format
Raw Data
Storage Handle
da/34/de9e4434d72f9c0b0f1976580076

Event Timeline