Page MenuHome GnuPG

No OneTemporary

This file is larger than 256 KB, so syntax highlighting was skipped.
diff --git a/doc/gpg.texi b/doc/gpg.texi
index 91186f24a..607a61122 100644
--- a/doc/gpg.texi
+++ b/doc/gpg.texi
@@ -1,3470 +1,3488 @@
@c Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
@c 2008, 2009, 2010 Free Software Foundation, Inc.
@c This is part of the GnuPG manual.
@c For copying conditions, see the file gnupg.texi.
@c Note that we use this texinfo file for all versions of GnuPG: 1.4.x,
@c 2.0 and 2.1. The macro "gpgone" controls parts which are only valid
@c for GnuPG 1.4, the macro "gpgtwoone" controls parts which are only
@c valid for GnupG 2.1 and later.
@node Invoking GPG
@chapter Invoking GPG
@cindex GPG command options
@cindex command options
@cindex options, GPG command
@c Begin GnuPG 1.x specific stuff
@ifset gpgone
@macro gpgname
gpg
@end macro
@manpage gpg.1
@ifset manverb
.B gpg
\- OpenPGP encryption and signing tool
@end ifset
@mansect synopsis
@ifset manverb
.B gpg
.RB [ \-\-homedir
.IR dir ]
.RB [ \-\-options
.IR file ]
.RI [ options ]
.I command
.RI [ args ]
@end ifset
@end ifset
@c End GnuPG 1.x specific stuff
@c Begin GnuPG 2 specific stuff
@ifclear gpgone
@macro gpgname
gpg2
@end macro
@manpage gpg2.1
@ifset manverb
.B gpg2
\- OpenPGP encryption and signing tool
@end ifset
@mansect synopsis
@ifset manverb
.B gpg2
.RB [ \-\-homedir
.IR dir ]
.RB [ \-\-options
.IR file ]
.RI [ options ]
.I command
.RI [ args ]
@end ifset
@end ifclear
@c Begin GnuPG 2 specific stuff
@mansect description
@command{@gpgname} is the OpenPGP part of the GNU Privacy Guard (GnuPG). It
is a tool to provide digital encryption and signing services using the
OpenPGP standard. @command{@gpgname} features complete key management and
all bells and whistles you can expect from a decent OpenPGP
implementation.
@ifset gpgone
This is the standalone version of @command{gpg}. For desktop use you
should consider using @command{gpg2} @footnote{On some platforms gpg2 is
installed under the name @command{gpg}}.
@end ifset
@ifclear gpgone
In contrast to the standalone version @command{gpg}, which is more
suited for server and embedded platforms, this version is commonly
installed under the name @command{gpg2} and more targeted to the desktop
as it requires several other modules to be installed. The standalone
version will be kept maintained and it is possible to install both
versions on the same system. If you need to use different configuration
files, you should make use of something like @file{gpg.conf-2} instead
of just @file{gpg.conf}.
@end ifclear
@manpause
@ifclear gpgone
Documentation for the old standard @command{gpg} is available as a man
page and at @inforef{Top,GnuPG 1,gpg}.
@end ifclear
@xref{Option Index}, for an index to @command{@gpgname}'s commands and options.
@mancont
@menu
* GPG Commands:: List of all commands.
* GPG Options:: List of all options.
* GPG Configuration:: Configuration files.
* GPG Examples:: Some usage examples.
Developer information:
* Unattended Usage of GPG:: Using @command{gpg} from other programs.
@end menu
@c * GPG Protocol:: The protocol the server mode uses.
@c *******************************************
@c *************** ****************
@c *************** COMMANDS ****************
@c *************** ****************
@c *******************************************
@mansect commands
@node GPG Commands
@section Commands
Commands are not distinguished from options except for the fact that
only one command is allowed.
@command{@gpgname} may be run with no commands, in which case it will
perform a reasonable action depending on the type of file it is given
as input (an encrypted message is decrypted, a signature is verified,
a file containing keys is listed).
Please remember that option as well as command parsing stops as soon as
a non-option is encountered, you can explicitly stop parsing by
using the special option @option{--}.
@menu
* General GPG Commands:: Commands not specific to the functionality.
* Operational GPG Commands:: Commands to select the type of operation.
* OpenPGP Key Management:: How to manage your keys.
@end menu
@c *******************************************
@c ********** GENERAL COMMANDS *************
@c *******************************************
@node General GPG Commands
@subsection Commands not specific to the function
@table @gnupgtabopt
@item --version
@opindex version
Print the program version and licensing information. Note that you
cannot abbreviate this command.
@item --help
@itemx -h
@opindex help
Print a usage message summarizing the most useful command line options.
Note that you cannot abbreviate this command.
@item --warranty
@opindex warranty
Print warranty information.
@item --dump-options
@opindex dump-options
Print a list of all available options and commands. Note that you cannot
abbreviate this command.
@end table
@c *******************************************
@c ******** OPERATIONAL COMMANDS ***********
@c *******************************************
@node Operational GPG Commands
@subsection Commands to select the type of operation
@table @gnupgtabopt
@item --sign
@itemx -s
@opindex sign
Make a signature. This command may be combined with @option{--encrypt}
(for a signed and encrypted message), @option{--symmetric} (for a
signed and symmetrically encrypted message), or @option{--encrypt} and
@option{--symmetric} together (for a signed message that may be
decrypted via a secret key or a passphrase). The key to be used for
signing is chosen by default or can be set with the
@option{--local-user} and @option{--default-key} options.
@item --clearsign
@opindex clearsign
Make a clear text signature. The content in a clear text signature is
readable without any special software. OpenPGP software is only needed
to verify the signature. Clear text signatures may modify end-of-line
whitespace for platform independence and are not intended to be
reversible. The key to be used for signing is chosen by default or
can be set with the @option{--local-user} and @option{--default-key}
options.
@item --detach-sign
@itemx -b
@opindex detach-sign
Make a detached signature.
@item --encrypt
@itemx -e
@opindex encrypt
Encrypt data. This option may be combined with @option{--sign} (for a
signed and encrypted message), @option{--symmetric} (for a message that
may be decrypted via a secret key or a passphrase), or @option{--sign}
and @option{--symmetric} together (for a signed message that may be
decrypted via a secret key or a passphrase).
@item --symmetric
@itemx -c
@opindex symmetric
Encrypt with a symmetric cipher using a passphrase. The default
symmetric cipher used is CAST5, but may be chosen with the
@option{--cipher-algo} option. This option may be combined with
@option{--sign} (for a signed and symmetrically encrypted message),
@option{--encrypt} (for a message that may be decrypted via a secret key
or a passphrase), or @option{--sign} and @option{--encrypt} together
(for a signed message that may be decrypted via a secret key or a
passphrase).
@item --store
@opindex store
Store only (make a simple RFC1991 literal data packet).
@item --decrypt
@itemx -d
@opindex decrypt
Decrypt the file given on the command line (or STDIN if no file
is specified) and write it to STDOUT (or the file specified with
@option{--output}). If the decrypted file is signed, the signature is also
verified. This command differs from the default operation, as it never
writes to the filename which is included in the file and it rejects
files which don't begin with an encrypted message.
@item --verify
@opindex verify
Assume that the first argument is a signed file or a detached signature
and verify it without generating any output. With no arguments, the
signature packet is read from STDIN. If only a sigfile is given, it may
be a complete signature or a detached signature, in which case the
signed stuff is expected in a file without the ".sig" or ".asc"
extension. With more than 1 argument, the first should be a detached
signature and the remaining files are the signed stuff. To read the
signed stuff from STDIN, use @samp{-} as the second filename. For
security reasons a detached signature cannot read the signed material
from STDIN without denoting it in the above way.
Note: When verifying a cleartext signature, @command{gpg} verifies
only what makes up the cleartext signed data and not any extra data
outside of the cleartext signature or header lines following directly
the dash marker line. The option @code{--output} may be used to write
out the actual signed data; but there are other pitfalls with this
format as well. It is suggested to avoid cleartext signatures in
favor of detached signatures.
@item --multifile
@opindex multifile
This modifies certain other commands to accept multiple files for
processing on the command line or read from STDIN with each filename on
a separate line. This allows for many files to be processed at
once. @option{--multifile} may currently be used along with
@option{--verify}, @option{--encrypt}, and @option{--decrypt}. Note that
@option{--multifile --verify} may not be used with detached signatures.
@item --verify-files
@opindex verify-files
Identical to @option{--multifile --verify}.
@item --encrypt-files
@opindex encrypt-files
Identical to @option{--multifile --encrypt}.
@item --decrypt-files
@opindex decrypt-files
Identical to @option{--multifile --decrypt}.
@item --list-keys
@itemx -k
@itemx --list-public-keys
@opindex list-keys
List all keys from the public keyrings, or just the keys given on the
command line.
@ifset gpgone
@option{-k} is slightly different from @option{--list-keys} in that it
allows only for one argument and takes the second argument as the
keyring to search. This is for command line compatibility with PGP 2
and has been removed in @command{gpg2}.
@end ifset
Avoid using the output of this command in scripts or other programs as
it is likely to change as GnuPG changes. See @option{--with-colons} for a
machine-parseable key listing command that is appropriate for use in
scripts and other programs.
@item --list-secret-keys
@itemx -K
@opindex list-secret-keys
List all keys from the secret keyrings, or just the ones given on the
command line. A @code{#} after the letters @code{sec} means that the
secret key is not usable (for example, if it was created via
@option{--export-secret-subkeys}).
@item --list-sigs
@opindex list-sigs
Same as @option{--list-keys}, but the signatures are listed too.
@ifclear gpgone
This command has the same effect as
using @option{--list-keys} with @option{--with-sig-list}.
@end ifclear
For each signature listed, there are several flags in between the "sig"
tag and keyid. These flags give additional information about each
signature. From left to right, they are the numbers 1-3 for certificate
check level (see @option{--ask-cert-level}), "L" for a local or
non-exportable signature (see @option{--lsign-key}), "R" for a
nonRevocable signature (see the @option{--edit-key} command "nrsign"),
"P" for a signature that contains a policy URL (see
@option{--cert-policy-url}), "N" for a signature that contains a
notation (see @option{--cert-notation}), "X" for an eXpired signature
(see @option{--ask-cert-expire}), and the numbers 1-9 or "T" for 10 and
above to indicate trust signature levels (see the @option{--edit-key}
command "tsign").
@item --check-sigs
@opindex check-sigs
Same as @option{--list-sigs}, but the signatures are verified. Note
that for performance reasons the revocation status of a signing key is
not shown.
@ifclear gpgone
This command has the same effect as
using @option{--list-keys} with @option{--with-sig-check}.
@end ifclear
The status of the verification is indicated by a flag directly following
the "sig" tag (and thus before the flags described above for
@option{--list-sigs}). A "!" indicates that the signature has been
successfully verified, a "-" denotes a bad signature and a "%" is used
if an error occurred while checking the signature (e.g. a non supported
algorithm).
@ifclear gpgone
@item --locate-keys
@opindex locate-keys
Locate the keys given as arguments. This command basically uses the
same algorithm as used when locating keys for encryption or signing and
may thus be used to see what keys @command{@gpgname} might use. In
particular external methods as defined by @option{--auto-key-locate} may
be used to locate a key. Only public keys are listed.
@end ifclear
@item --fingerprint
@opindex fingerprint
List all keys (or the specified ones) along with their
fingerprints. This is the same output as @option{--list-keys} but with
the additional output of a line with the fingerprint. May also be
combined with @option{--list-sigs} or @option{--check-sigs}. If this
command is given twice, the fingerprints of all secondary keys are
listed too.
@item --list-packets
@opindex list-packets
List only the sequence of packets. This is mainly
useful for debugging.
@item --card-edit
@opindex card-edit
Present a menu to work with a smartcard. The subcommand "help" provides
an overview on available commands. For a detailed description, please
see the Card HOWTO at
http://www.gnupg.org/documentation/howtos.html#GnuPG-cardHOWTO .
@item --card-status
@opindex card-status
Show the content of the smart card.
@item --change-pin
@opindex change-pin
Present a menu to allow changing the PIN of a smartcard. This
functionality is also available as the subcommand "passwd" with the
@option{--card-edit} command.
@item --delete-key @code{name}
@opindex delete-key
Remove key from the public keyring. In batch mode either @option{--yes} is
required or the key must be specified by fingerprint. This is a
safeguard against accidental deletion of multiple keys.
@item --delete-secret-key @code{name}
@opindex delete-secret-key
Remove key from the secret keyring. In batch mode the key
must be specified by fingerprint.
@item --delete-secret-and-public-key @code{name}
@opindex delete-secret-and-public-key
Same as @option{--delete-key}, but if a secret key exists, it will be
removed first. In batch mode the key must be specified by fingerprint.
@item --export
@opindex export
Either export all keys from all keyrings (default keyrings and those
registered via option @option{--keyring}), or if at least one name is given,
those of the given name. The new keyring is written to STDOUT or to the
file given with option @option{--output}. Use together with
@option{--armor} to mail those keys.
@item --send-keys @code{key IDs}
@opindex send-keys
Similar to @option{--export} but sends the keys to a keyserver.
Fingerprints may be used instead of key IDs. Option @option{--keyserver}
must be used to give the name of this keyserver. Don't send your
complete keyring to a keyserver --- select only those keys which are new
or changed by you. If no key IDs are given, @command{gpg} does nothing.
@item --export-secret-keys
@itemx --export-secret-subkeys
@opindex export-secret-keys
@opindex export-secret-subkeys
Same as @option{--export}, but exports the secret keys instead. This is
normally not very useful and a security risk. The second form of the
command has the special property to render the secret part of the
primary key useless; this is a GNU extension to OpenPGP and other
implementations can not be expected to successfully import such a key.
@ifclear gpgtwoone
See the option @option{--simple-sk-checksum} if you want to import such
an exported key with an older OpenPGP implementation.
@end ifclear
@item --import
@itemx --fast-import
@opindex import
Import/merge keys. This adds the given keys to the
keyring. The fast version is currently just a synonym.
There are a few other options which control how this command works.
Most notable here is the @option{--import-options merge-only} option
which does not insert new keys but does only the merging of new
signatures, user-IDs and subkeys.
@item --recv-keys @code{key IDs}
@opindex recv-keys
Import the keys with the given key IDs from a keyserver. Option
@option{--keyserver} must be used to give the name of this keyserver.
@item --refresh-keys
@opindex refresh-keys
Request updates from a keyserver for keys that already exist on the
local keyring. This is useful for updating a key with the latest
signatures, user IDs, etc. Calling this with no arguments will refresh
the entire keyring. Option @option{--keyserver} must be used to give the
name of the keyserver for all keys that do not have preferred keyservers
set (see @option{--keyserver-options honor-keyserver-url}).
@item --search-keys @code{names}
@opindex search-keys
Search the keyserver for the given names. Multiple names given here will
be joined together to create the search string for the keyserver.
Option @option{--keyserver} must be used to give the name of this
keyserver. Keyservers that support different search methods allow using
the syntax specified in "How to specify a user ID" below. Note that
different keyserver types support different search methods. Currently
only LDAP supports them all.
@item --fetch-keys @code{URIs}
@opindex fetch-keys
Retrieve keys located at the specified URIs. Note that different
installations of GnuPG may support different protocols (HTTP, FTP,
LDAP, etc.)
@item --update-trustdb
@opindex update-trustdb
Do trust database maintenance. This command iterates over all keys and
builds the Web of Trust. This is an interactive command because it may
have to ask for the "ownertrust" values for keys. The user has to give
an estimation of how far she trusts the owner of the displayed key to
correctly certify (sign) other keys. GnuPG only asks for the ownertrust
value if it has not yet been assigned to a key. Using the
@option{--edit-key} menu, the assigned value can be changed at any time.
@item --check-trustdb
@opindex check-trustdb
Do trust database maintenance without user interaction. From time to
time the trust database must be updated so that expired keys or
signatures and the resulting changes in the Web of Trust can be
tracked. Normally, GnuPG will calculate when this is required and do it
automatically unless @option{--no-auto-check-trustdb} is set. This
command can be used to force a trust database check at any time. The
processing is identical to that of @option{--update-trustdb} but it
skips keys with a not yet defined "ownertrust".
For use with cron jobs, this command can be used together with
@option{--batch} in which case the trust database check is done only if
a check is needed. To force a run even in batch mode add the option
@option{--yes}.
@anchor{option --export-ownertrust}
@item --export-ownertrust
@opindex export-ownertrust
Send the ownertrust values to STDOUT. This is useful for backup purposes
as these values are the only ones which can't be re-created from a
corrupted trustdb. Example:
@c man:.RS
@example
@gpgname{} --export-ownertrust > otrust.txt
@end example
@c man:.RE
@item --import-ownertrust
@opindex import-ownertrust
Update the trustdb with the ownertrust values stored in @code{files} (or
STDIN if not given); existing values will be overwritten. In case of a
severely damaged trustdb and if you have a recent backup of the
ownertrust values (e.g. in the file @file{otrust.txt}, you may re-create
the trustdb using these commands:
@c man:.RS
@example
cd ~/.gnupg
rm trustdb.gpg
@gpgname{} --import-ownertrust < otrust.txt
@end example
@c man:.RE
@item --rebuild-keydb-caches
@opindex rebuild-keydb-caches
When updating from version 1.0.6 to 1.0.7 this command should be used
to create signature caches in the keyring. It might be handy in other
situations too.
@item --print-md @code{algo}
@itemx --print-mds
@opindex print-md
Print message digest of algorithm ALGO for all given files or STDIN.
With the second form (or a deprecated "*" as algo) digests for all
available algorithms are printed.
@item --gen-random @code{0|1|2} @code{count}
@opindex gen-random
Emit @var{count} random bytes of the given quality level 0, 1 or 2. If
@var{count} is not given or zero, an endless sequence of random bytes
will be emitted. If used with @option{--armor} the output will be
base64 encoded. PLEASE, don't use this command unless you know what
you are doing; it may remove precious entropy from the system!
@item --gen-prime @code{mode} @code{bits}
@opindex gen-prime
Use the source, Luke :-). The output format is still subject to change.
@item --enarmor
@item --dearmor
@opindex enarmor
@opindex dearmor
Pack or unpack an arbitrary input into/from an OpenPGP ASCII armor.
This is a GnuPG extension to OpenPGP and in general not very useful.
@end table
@c *******************************************
@c ******* KEY MANGEMENT COMMANDS **********
@c *******************************************
@node OpenPGP Key Management
@subsection How to manage your keys
This section explains the main commands for key management
@table @gnupgtabopt
@item --gen-key
@opindex gen-key
Generate a new key pair. This command is normally only used
interactively.
There is an experimental feature which allows you to create keys in
batch mode. See the file @file{doc/DETAILS} in the source distribution
on how to use this.
@item --gen-revoke @code{name}
@opindex gen-revoke
Generate a revocation certificate for the complete key. To revoke
a subkey or a signature, use the @option{--edit} command.
@item --desig-revoke @code{name}
@opindex desig-revoke
Generate a designated revocation certificate for a key. This allows a
user (with the permission of the keyholder) to revoke someone else's
key.
@item --edit-key
@opindex edit-key
Present a menu which enables you to do most of the key management
related tasks. It expects the specification of a key on the command
line.
@c ******** Begin Edit-key Options **********
@table @asis
@item uid @code{n}
@opindex keyedit:uid
Toggle selection of user ID or photographic user ID with index @code{n}.
Use @code{*} to select all and @code{0} to deselect all.
@item key @code{n}
@opindex keyedit:key
Toggle selection of subkey with index @code{n}.
Use @code{*} to select all and @code{0} to deselect all.
@item sign
@opindex keyedit:sign
Make a signature on key of user @code{name} If the key is not yet
signed by the default user (or the users given with -u), the program
displays the information of the key again, together with its
fingerprint and asks whether it should be signed. This question is
repeated for all users specified with
-u.
@item lsign
@opindex keyedit:lsign
Same as "sign" but the signature is marked as non-exportable and will
therefore never be used by others. This may be used to make keys
valid only in the local environment.
@item nrsign
@opindex keyedit:nrsign
Same as "sign" but the signature is marked as non-revocable and can
therefore never be revoked.
@item tsign
@opindex keyedit:tsign
Make a trust signature. This is a signature that combines the notions
of certification (like a regular signature), and trust (like the
"trust" command). It is generally only useful in distinct communities
or groups.
@end table
@c man:.RS
Note that "l" (for local / non-exportable), "nr" (for non-revocable,
and "t" (for trust) may be freely mixed and prefixed to "sign" to
create a signature of any type desired.
@c man:.RE
@table @asis
@item delsig
@opindex keyedit:delsig
Delete a signature. Note that it is not possible to retract a signature,
once it has been send to the public (i.e. to a keyserver). In that case
you better use @code{revsig}.
@item revsig
@opindex keyedit:revsig
Revoke a signature. For every signature which has been generated by
one of the secret keys, GnuPG asks whether a revocation certificate
should be generated.
@item check
@opindex keyedit:check
Check the signatures on all selected user IDs.
@item adduid
@opindex keyedit:adduid
Create an additional user ID.
@item addphoto
@opindex keyedit:addphoto
Create a photographic user ID. This will prompt for a JPEG file that
will be embedded into the user ID. Note that a very large JPEG will make
for a very large key. Also note that some programs will display your
JPEG unchanged (GnuPG), and some programs will scale it to fit in a
dialog box (PGP).
@item showphoto
@opindex keyedit:showphoto
Display the selected photographic user ID.
@item deluid
@opindex keyedit:deluid
Delete a user ID or photographic user ID. Note that it is not
possible to retract a user id, once it has been send to the public
(i.e. to a keyserver). In that case you better use @code{revuid}.
@item revuid
@opindex keyedit:revuid
Revoke a user ID or photographic user ID.
@item primary
@opindex keyedit:primary
Flag the current user id as the primary one, removes the primary user
id flag from all other user ids and sets the timestamp of all affected
self-signatures one second ahead. Note that setting a photo user ID
as primary makes it primary over other photo user IDs, and setting a
regular user ID as primary makes it primary over other regular user
IDs.
@item keyserver
@opindex keyedit:keyserver
Set a preferred keyserver for the specified user ID(s). This allows
other users to know where you prefer they get your key from. See
@option{--keyserver-options honor-keyserver-url} for more on how this
works. Setting a value of "none" removes an existing preferred
keyserver.
@item notation
@opindex keyedit:notation
Set a name=value notation for the specified user ID(s). See
@option{--cert-notation} for more on how this works. Setting a value of
"none" removes all notations, setting a notation prefixed with a minus
sign (-) removes that notation, and setting a notation name (without the
=value) prefixed with a minus sign removes all notations with that name.
@item pref
@opindex keyedit:pref
List preferences from the selected user ID. This shows the actual
preferences, without including any implied preferences.
@item showpref
@opindex keyedit:showpref
More verbose preferences listing for the selected user ID. This shows
the preferences in effect by including the implied preferences of 3DES
(cipher), SHA-1 (digest), and Uncompressed (compression) if they are
not already included in the preference list. In addition, the
preferred keyserver and signature notations (if any) are shown.
@item setpref @code{string}
@opindex keyedit:setpref
Set the list of user ID preferences to @code{string} for all (or just
the selected) user IDs. Calling setpref with no arguments sets the
preference list to the default (either built-in or set via
@option{--default-preference-list}), and calling setpref with "none"
as the argument sets an empty preference list. Use @command{@gpgname
--version} to get a list of available algorithms. Note that while you
can change the preferences on an attribute user ID (aka "photo ID"),
GnuPG does not select keys via attribute user IDs so these preferences
will not be used by GnuPG.
When setting preferences, you should list the algorithms in the order
which you'd like to see them used by someone else when encrypting a
message to your key. If you don't include 3DES, it will be
automatically added at the end. Note that there are many factors that
go into choosing an algorithm (for example, your key may not be the
only recipient), and so the remote OpenPGP application being used to
send to you may or may not follow your exact chosen order for a given
message. It will, however, only choose an algorithm that is present
on the preference list of every recipient key. See also the
INTEROPERABILITY WITH OTHER OPENPGP PROGRAMS section below.
@item addkey
@opindex keyedit:addkey
Add a subkey to this key.
@item addcardkey
@opindex keyedit:addcardkey
Generate a subkey on a card and add it to this key.
@item keytocard
@opindex keyedit:keytocard
Transfer the selected secret subkey (or the primary key if no subkey
has been selected) to a smartcard. The secret key in the keyring will
be replaced by a stub if the key could be stored successfully on the
card and you use the save command later. Only certain key types may be
transferred to the card. A sub menu allows you to select on what card
to store the key. Note that it is not possible to get that key back
from the card - if the card gets broken your secret key will be lost
unless you have a backup somewhere.
@item bkuptocard @code{file}
@opindex keyedit:bkuptocard
Restore the given file to a card. This command may be used to restore a
backup key (as generated during card initialization) to a new card. In
almost all cases this will be the encryption key. You should use this
command only with the corresponding public key and make sure that the
file given as argument is indeed the backup to restore. You should then
select 2 to restore as encryption key. You will first be asked to enter
the passphrase of the backup key and then for the Admin PIN of the card.
@item delkey
@opindex keyedit:delkey
Remove a subkey (secondart key). Note that it is not possible to retract
a subkey, once it has been send to the public (i.e. to a keyserver). In
that case you better use @code{revkey}.
@item revkey
@opindex keyedit:revkey
Revoke a subkey.
@item expire
@opindex keyedit:expire
Change the key or subkey expiration time. If a subkey is selected, the
expiration time of this subkey will be changed. With no selection, the
key expiration of the primary key is changed.
@item trust
@opindex keyedit:trust
Change the owner trust value for the key. This updates the trust-db
immediately and no save is required.
@item disable
@itemx enable
@opindex keyedit:disable
@opindex keyedit:enable
Disable or enable an entire key. A disabled key can not normally be
used for encryption.
@item addrevoker
@opindex keyedit:addrevoker
Add a designated revoker to the key. This takes one optional argument:
"sensitive". If a designated revoker is marked as sensitive, it will
not be exported by default (see export-options).
@item passwd
@opindex keyedit:passwd
Change the passphrase of the secret key.
@item toggle
@opindex keyedit:toggle
Toggle between public and secret key listing.
@item clean
@opindex keyedit:clean
Compact (by removing all signatures except the selfsig) any user ID
that is no longer usable (e.g. revoked, or expired). Then, remove any
signatures that are not usable by the trust calculations.
Specifically, this removes any signature that does not validate, any
signature that is superseded by a later signature, revoked signatures,
and signatures issued by keys that are not present on the keyring.
@item minimize
@opindex keyedit:minimize
Make the key as small as possible. This removes all signatures from
each user ID except for the most recent self-signature.
@item cross-certify
@opindex keyedit:cross-certify
Add cross-certification signatures to signing subkeys that may not
currently have them. Cross-certification signatures protect against a
subtle attack against signing subkeys. See
@option{--require-cross-certification}. All new keys generated have
this signature by default, so this option is only useful to bring
older keys up to date.
@item save
@opindex keyedit:save
Save all changes to the key rings and quit.
@item quit
@opindex keyedit:quit
Quit the program without updating the
key rings.
@end table
@c man:.RS
The listing shows you the key with its secondary keys and all user
ids. The primary user id is indicated by a dot, and selected keys or
user ids are indicated by an asterisk. The trust
value is displayed with the primary key: the first is the assigned owner
trust and the second is the calculated trust value. Letters are used for
the values:
@c man:.RE
@table @asis
@item -
No ownertrust assigned / not yet calculated.
@item e
Trust
calculation has failed; probably due to an expired key.
@item q
Not enough information for calculation.
@item n
Never trust this key.
@item m
Marginally trusted.
@item f
Fully trusted.
@item u
Ultimately trusted.
@end table
@c ******** End Edit-key Options **********
@item --sign-key @code{name}
@opindex sign-key
Signs a public key with your secret key. This is a shortcut version of
the subcommand "sign" from @option{--edit}.
@item --lsign-key @code{name}
@opindex lsign-key
Signs a public key with your secret key but marks it as
non-exportable. This is a shortcut version of the subcommand "lsign"
from @option{--edit-key}.
+@ifset gpgtwoone
+@item --quick-sign-key @code{fpr} [@code{names}]
+@itemx --quick-lsign-key @code{name}
+@opindex quick-sign-key
+@opindex quick-lsign-key
+Directly sign a key from the passphrase without any further user
+interaction. The @code{fpr} must be the verified primary fingerprint
+of a key in the local keyring. If no @code{names} are given, all
+useful user ids are signed; with given [@code{names}] only useful user
+ids matching one of theses names are signed. The command
+@option{--quick-lsign-key} marks the signatures as non-exportable.
+
+This command uses reasonable defaults and thus does not provide the
+full flexibility of the "sign" subcommand from @option{--edit-key}.
+Its intended use to help unattended signing using a list of verified
+fingerprints.
+@end ifset
+
@ifclear gpgone
@item --passwd @var{user_id}
@opindex passwd
Change the passphrase of the secret key belonging to the certificate
specified as @var{user_id}. This is a shortcut for the sub-command
@code{passwd} of the edit key menu.
@end ifclear
@end table
@c *******************************************
@c *************** ****************
@c *************** OPTIONS ****************
@c *************** ****************
@c *******************************************
@mansect options
@node GPG Options
@section Option Summary
@command{@gpgname} features a bunch of options to control the exact
behaviour and to change the default configuration.
@menu
* GPG Configuration Options:: How to change the configuration.
* GPG Key related Options:: Key related options.
* GPG Input and Output:: Input and Output.
* OpenPGP Options:: OpenPGP protocol specific options.
* Compliance Options:: Compliance options.
* GPG Esoteric Options:: Doing things one usually don't want to do.
* Deprecated Options:: Deprecated options.
@end menu
Long options can be put in an options file (default
"~/.gnupg/gpg.conf"). Short option names will not work - for example,
"armor" is a valid option for the options file, while "a" is not. Do not
write the 2 dashes, but simply the name of the option and any required
arguments. Lines with a hash ('#') as the first non-white-space
character are ignored. Commands may be put in this file too, but that is
not generally useful as the command will execute automatically with
every execution of gpg.
Please remember that option parsing stops as soon as a non-option is
encountered, you can explicitly stop parsing by using the special option
@option{--}.
@c *******************************************
@c ******** CONFIGURATION OPTIONS **********
@c *******************************************
@node GPG Configuration Options
@subsection How to change the configuration
These options are used to change the configuration and are usually found
in the option file.
@table @gnupgtabopt
@item --default-key @var{name}
@opindex default-key
Use @var{name} as the default key to sign with. If this option is not
used, the default key is the first key found in the secret keyring.
Note that @option{-u} or @option{--local-user} overrides this option.
@item --default-recipient @var{name}
@opindex default-recipient
Use @var{name} as default recipient if option @option{--recipient} is
not used and don't ask if this is a valid one. @var{name} must be
non-empty.
@item --default-recipient-self
@opindex default-recipient-self
Use the default key as default recipient if option @option{--recipient} is not
used and don't ask if this is a valid one. The default key is the first
one from the secret keyring or the one set with @option{--default-key}.
@item --no-default-recipient
@opindex no-default-recipient
Reset @option{--default-recipient} and @option{--default-recipient-self}.
@item -v, --verbose
@opindex verbose
Give more information during processing. If used
twice, the input data is listed in detail.
@item --no-verbose
@opindex no-verbose
Reset verbose level to 0.
@item -q, --quiet
@opindex quiet
Try to be as quiet as possible.
@item --batch
@itemx --no-batch
@opindex batch
@opindex no-batch
Use batch mode. Never ask, do not allow interactive commands.
@option{--no-batch} disables this option. Note that even with a
filename given on the command line, gpg might still need to read from
STDIN (in particular if gpg figures that the input is a
detached signature and no data file has been specified). Thus if you
do not want to feed data via STDIN, you should connect STDIN to
@file{/dev/null}.
@item --no-tty
@opindex no-tty
Make sure that the TTY (terminal) is never used for any output.
This option is needed in some cases because GnuPG sometimes prints
warnings to the TTY even if @option{--batch} is used.
@item --yes
@opindex yes
Assume "yes" on most questions.
@item --no
@opindex no
Assume "no" on most questions.
@item --list-options @code{parameters}
@opindex list-options
This is a space or comma delimited string that gives options used when
listing keys and signatures (that is, @option{--list-keys},
@option{--list-sigs}, @option{--list-public-keys},
@option{--list-secret-keys}, and the @option{--edit-key} functions).
Options can be prepended with a @option{no-} (after the two dashes) to
give the opposite meaning. The options are:
@table @asis
@item show-photos
@opindex list-options:show-photos
Causes @option{--list-keys}, @option{--list-sigs},
@option{--list-public-keys}, and @option{--list-secret-keys} to
display any photo IDs attached to the key. Defaults to no. See also
@option{--photo-viewer}. Does not work with @option{--with-colons}:
see @option{--attribute-fd} for the appropriate way to get photo data
for scripts and other frontends.
@item show-policy-urls
@opindex list-options:show-policy-urls
Show policy URLs in the @option{--list-sigs} or @option{--check-sigs}
listings. Defaults to no.
@item show-notations
@itemx show-std-notations
@itemx show-user-notations
@opindex list-options:show-notations
@opindex list-options:show-std-notations
@opindex list-options:show-user-notations
Show all, IETF standard, or user-defined signature notations in the
@option{--list-sigs} or @option{--check-sigs} listings. Defaults to no.
@item show-keyserver-urls
@opindex list-options:show-keyserver-urls
Show any preferred keyserver URL in the @option{--list-sigs} or
@option{--check-sigs} listings. Defaults to no.
@item show-uid-validity
@opindex list-options:show-uid-validity
Display the calculated validity of user IDs during key listings.
Defaults to no.
@item show-unusable-uids
@opindex list-options:show-unusable-uids
Show revoked and expired user IDs in key listings. Defaults to no.
@item show-unusable-subkeys
@opindex list-options:show-unusable-subkeys
Show revoked and expired subkeys in key listings. Defaults to no.
@item show-keyring
@opindex list-options:show-keyring
Display the keyring name at the head of key listings to show which
keyring a given key resides on. Defaults to no.
@item show-sig-expire
@opindex list-options:show-sig-expire
Show signature expiration dates (if any) during @option{--list-sigs} or
@option{--check-sigs} listings. Defaults to no.
@item show-sig-subpackets
@opindex list-options:show-sig-subpackets
Include signature subpackets in the key listing. This option can take an
optional argument list of the subpackets to list. If no argument is
passed, list all subpackets. Defaults to no. This option is only
meaningful when using @option{--with-colons} along with
@option{--list-sigs} or @option{--check-sigs}.
@end table
@item --verify-options @code{parameters}
@opindex verify-options
This is a space or comma delimited string that gives options used when
verifying signatures. Options can be prepended with a `no-' to give
the opposite meaning. The options are:
@table @asis
@item show-photos
@opindex verify-options:show-photos
Display any photo IDs present on the key that issued the signature.
Defaults to no. See also @option{--photo-viewer}.
@item show-policy-urls
@opindex verify-options:show-policy-urls
Show policy URLs in the signature being verified. Defaults to no.
@item show-notations
@itemx show-std-notations
@itemx show-user-notations
@opindex verify-options:show-notations
@opindex verify-options:show-std-notations
@opindex verify-options:show-user-notations
Show all, IETF standard, or user-defined signature notations in the
signature being verified. Defaults to IETF standard.
@item show-keyserver-urls
@opindex verify-options:show-keyserver-urls
Show any preferred keyserver URL in the signature being verified.
Defaults to no.
@item show-uid-validity
@opindex verify-options:show-uid-validity
Display the calculated validity of the user IDs on the key that issued
the signature. Defaults to no.
@item show-unusable-uids
@opindex verify-options:show-unusable-uids
Show revoked and expired user IDs during signature verification.
Defaults to no.
@item show-primary-uid-only
@opindex verify-options:show-primary-uid-only
Show only the primary user ID during signature verification. That is
all the AKA lines as well as photo Ids are not shown with the signature
verification status.
@item pka-lookups
@opindex verify-options:pka-lookups
Enable PKA lookups to verify sender addresses. Note that PKA is based
on DNS, and so enabling this option may disclose information on when
and what signatures are verified or to whom data is encrypted. This
is similar to the "web bug" described for the auto-key-retrieve
feature.
@item pka-trust-increase
@opindex verify-options:pka-trust-increase
Raise the trust in a signature to full if the signature passes PKA
validation. This option is only meaningful if pka-lookups is set.
@end table
@item --enable-dsa2
@itemx --disable-dsa2
@opindex enable-dsa2
@opindex disable-dsa2
Enable hash truncation for all DSA keys even for old DSA Keys up to
1024 bit. This is also the default with @option{--openpgp}. Note
that older versions of GnuPG also required this flag to allow the
generation of DSA larger than 1024 bit.
@item --photo-viewer @code{string}
@opindex photo-viewer
This is the command line that should be run to view a photo ID. "%i"
will be expanded to a filename containing the photo. "%I" does the
same, except the file will not be deleted once the viewer exits.
Other flags are "%k" for the key ID, "%K" for the long key ID, "%f"
for the key fingerprint, "%t" for the extension of the image type
(e.g. "jpg"), "%T" for the MIME type of the image (e.g. "image/jpeg"),
"%v" for the single-character calculated validity of the image being
viewed (e.g. "f"), "%V" for the calculated validity as a string (e.g.
"full"),
and "%%" for an actual percent sign. If neither %i or %I are present,
then the photo will be supplied to the viewer on standard input.
The default viewer is "xloadimage -fork -quiet -title 'KeyID 0x%k'
STDIN". Note that if your image viewer program is not secure, then
executing it from GnuPG does not make it secure.
@item --exec-path @code{string}
@opindex exec-path
Sets a list of directories to search for photo viewers and keyserver
helpers. If not provided, keyserver helpers use the compiled-in
default directory, and photo viewers use the $PATH environment
variable.
Note, that on W32 system this value is ignored when searching for
keyserver helpers.
@item --keyring @code{file}
@opindex keyring
Add @code{file} to the current list of keyrings. If @code{file} begins
with a tilde and a slash, these are replaced by the $HOME directory. If
the filename does not contain a slash, it is assumed to be in the GnuPG
home directory ("~/.gnupg" if @option{--homedir} or $GNUPGHOME is not
used).
Note that this adds a keyring to the current list. If the intent is to
use the specified keyring alone, use @option{--keyring} along with
@option{--no-default-keyring}.
@item --secret-keyring @code{file}
@opindex secret-keyring
Same as @option{--keyring} but for the secret keyrings.
@item --primary-keyring @code{file}
@opindex primary-keyring
Designate @code{file} as the primary public keyring. This means that
newly imported keys (via @option{--import} or keyserver
@option{--recv-from}) will go to this keyring.
@item --trustdb-name @code{file}
@opindex trustdb-name
Use @code{file} instead of the default trustdb. If @code{file} begins
with a tilde and a slash, these are replaced by the $HOME directory. If
the filename does not contain a slash, it is assumed to be in the GnuPG
home directory (@file{~/.gnupg} if @option{--homedir} or $GNUPGHOME is
not used).
@ifset gpgone
@anchor{option --homedir}
@end ifset
@include opt-homedir.texi
@ifset gpgone
@item --pcsc-driver @code{file}
@opindex pcsc-driver
Use @code{file} to access the smartcard reader. The current default is
`libpcsclite.so.1' for GLIBC based systems,
`/System/Library/Frameworks/PCSC.framework/PCSC' for MAC OS X,
`winscard.dll' for Windows and `libpcsclite.so' for other systems.
@end ifset
@ifset gpgone
@item --disable-ccid
@opindex disable-ccid
Disable the integrated support for CCID compliant readers. This
allows to fall back to one of the other drivers even if the internal
CCID driver can handle the reader. Note, that CCID support is only
available if libusb was available at build time.
@end ifset
@ifset gpgone
@item --reader-port @code{number_or_string}
@opindex reader-port
This option may be used to specify the port of the card terminal. A
value of 0 refers to the first serial device; add 32768 to access USB
devices. The default is 32768 (first USB device). PC/SC or CCID
readers might need a string here; run the program in verbose mode to get
a list of available readers. The default is then the first reader
found.
@end ifset
@item --display-charset @code{name}
@opindex display-charset
Set the name of the native character set. This is used to convert
some informational strings like user IDs to the proper UTF-8 encoding.
Note that this has nothing to do with the character set of data to be
encrypted or signed; GnuPG does not recode user-supplied data. If
this option is not used, the default character set is determined from
the current locale. A verbosity level of 3 shows the chosen set.
Valid values for @code{name} are:
@table @asis
@item iso-8859-1
@opindex display-charset:iso-8859-1
This is the Latin 1 set.
@item iso-8859-2
@opindex display-charset:iso-8859-2
The Latin 2 set.
@item iso-8859-15
@opindex display-charset:iso-8859-15
This is currently an alias for
the Latin 1 set.
@item koi8-r
@opindex display-charset:koi8-r
The usual Russian set (rfc1489).
@item utf-8
@opindex display-charset:utf-8
Bypass all translations and assume
that the OS uses native UTF-8 encoding.
@end table
@item --utf8-strings
@itemx --no-utf8-strings
@opindex utf8-strings
Assume that command line arguments are given as UTF8 strings. The
default (@option{--no-utf8-strings}) is to assume that arguments are
encoded in the character set as specified by
@option{--display-charset}. These options affect all following
arguments. Both options may be used multiple times.
@anchor{gpg-option --options}
@item --options @code{file}
@opindex options
Read options from @code{file} and do not try to read them from the
default options file in the homedir (see @option{--homedir}). This
option is ignored if used in an options file.
@item --no-options
@opindex no-options
Shortcut for @option{--options /dev/null}. This option is detected
before an attempt to open an option file. Using this option will also
prevent the creation of a @file{~/.gnupg} homedir.
@item -z @code{n}
@itemx --compress-level @code{n}
@itemx --bzip2-compress-level @code{n}
@opindex compress-level
@opindex bzip2-compress-level
Set compression level to @code{n} for the ZIP and ZLIB compression
algorithms. The default is to use the default compression level of zlib
(normally 6). @option{--bzip2-compress-level} sets the compression level
for the BZIP2 compression algorithm (defaulting to 6 as well). This is a
different option from @option{--compress-level} since BZIP2 uses a
significant amount of memory for each additional compression level.
@option{-z} sets both. A value of 0 for @code{n} disables compression.
@item --bzip2-decompress-lowmem
@opindex bzip2-decompress-lowmem
Use a different decompression method for BZIP2 compressed files. This
alternate method uses a bit more than half the memory, but also runs
at half the speed. This is useful under extreme low memory
circumstances when the file was originally compressed at a high
@option{--bzip2-compress-level}.
@item --mangle-dos-filenames
@itemx --no-mangle-dos-filenames
@opindex mangle-dos-filenames
@opindex no-mangle-dos-filenames
Older version of Windows cannot handle filenames with more than one
dot. @option{--mangle-dos-filenames} causes GnuPG to replace (rather
than add to) the extension of an output filename to avoid this
problem. This option is off by default and has no effect on non-Windows
platforms.
@item --ask-cert-level
@itemx --no-ask-cert-level
@opindex ask-cert-level
When making a key signature, prompt for a certification level. If this
option is not specified, the certification level used is set via
@option{--default-cert-level}. See @option{--default-cert-level} for
information on the specific levels and how they are
used. @option{--no-ask-cert-level} disables this option. This option
defaults to no.
@item --default-cert-level @code{n}
@opindex default-cert-level
The default to use for the check level when signing a key.
0 means you make no particular claim as to how carefully you verified
the key.
1 means you believe the key is owned by the person who claims to own
it but you could not, or did not verify the key at all. This is
useful for a "persona" verification, where you sign the key of a
pseudonymous user.
2 means you did casual verification of the key. For example, this
could mean that you verified the key fingerprint and checked the
user ID on the key against a photo ID.
3 means you did extensive verification of the key. For example, this
could mean that you verified the key fingerprint with the owner of the
key in person, and that you checked, by means of a hard to forge
document with a photo ID (such as a passport) that the name of the key
owner matches the name in the user ID on the key, and finally that you
verified (by exchange of email) that the email address on the key
belongs to the key owner.
Note that the examples given above for levels 2 and 3 are just that:
examples. In the end, it is up to you to decide just what "casual"
and "extensive" mean to you.
This option defaults to 0 (no particular claim).
@item --min-cert-level
@opindex min-cert-level
When building the trust database, treat any signatures with a
certification level below this as invalid. Defaults to 2, which
disregards level 1 signatures. Note that level 0 "no particular
claim" signatures are always accepted.
@item --trusted-key @code{long key ID}
@opindex trusted-key
Assume that the specified key (which must be given
as a full 8 byte key ID) is as trustworthy as one of
your own secret keys. This option is useful if you
don't want to keep your secret keys (or one of them)
online but still want to be able to check the validity of a given
recipient's or signator's key.
@item --trust-model @code{pgp|classic|direct|always|auto}
@opindex trust-model
Set what trust model GnuPG should follow. The models are:
@table @asis
@item pgp
@opindex trust-mode:pgp
This is the Web of Trust combined with trust signatures as used in PGP
5.x and later. This is the default trust model when creating a new
trust database.
@item classic
@opindex trust-mode:classic
This is the standard Web of Trust as used in PGP 2.x and earlier.
@item direct
@opindex trust-mode:direct
Key validity is set directly by the user and not calculated via the
Web of Trust.
@item always
@opindex trust-mode:always
Skip key validation and assume that used keys are always fully
trusted. You generally won't use this unless you are using some
external validation scheme. This option also suppresses the
"[uncertain]" tag printed with signature checks when there is no
evidence that the user ID is bound to the key.
@item auto
@opindex trust-mode:auto
Select the trust model depending on whatever the internal trust
database says. This is the default model if such a database already
exists.
@end table
@item --auto-key-locate @code{parameters}
@itemx --no-auto-key-locate
@opindex auto-key-locate
GnuPG can automatically locate and retrieve keys as needed using this
option. This happens when encrypting to an email address (in the
"user@@example.com" form), and there are no user@@example.com keys on
the local keyring. This option takes any number of the following
mechanisms, in the order they are to be tried:
@table @asis
@item cert
Locate a key using DNS CERT, as specified in rfc4398.
@item pka
Locate a key using DNS PKA.
@item ldap
Using DNS Service Discovery, check the domain in question for any LDAP
keyservers to use. If this fails, attempt to locate the key using the
PGP Universal method of checking @samp{ldap://keys.(thedomain)}.
@item keyserver
Locate a key using whatever keyserver is defined using the
@option{--keyserver} option.
@item keyserver-URL
In addition, a keyserver URL as used in the @option{--keyserver} option
may be used here to query that particular keyserver.
@item local
Locate the key using the local keyrings. This mechanism allows to
select the order a local key lookup is done. Thus using
@samp{--auto-key-locate local} is identical to
@option{--no-auto-key-locate}.
@item nodefault
This flag disables the standard local key lookup, done before any of the
mechanisms defined by the @option{--auto-key-locate} are tried. The
position of this mechanism in the list does not matter. It is not
required if @code{local} is also used.
@item clear
Clear all defined mechanisms. This is usefule to override
mechanisms fiven in a config file.
@end table
@item --keyid-format @code{short|0xshort|long|0xlong}
@opindex keyid-format
Select how to display key IDs. "short" is the traditional 8-character
key ID. "long" is the more accurate (but less convenient)
16-character key ID. Add an "0x" to either to include an "0x" at the
beginning of the key ID, as in 0x99242560. Note that this option is
ignored if the option --with-colons is used.
@item --keyserver @code{name}
@opindex keyserver
Use @code{name} as your keyserver. This is the server that
@option{--recv-keys}, @option{--send-keys}, and @option{--search-keys}
will communicate with to receive keys from, send keys to, and search for
keys on. The format of the @code{name} is a URI:
`scheme:[//]keyservername[:port]' The scheme is the type of keyserver:
"hkp" for the HTTP (or compatible) keyservers, "ldap" for the LDAP
keyservers, or "mailto" for the Graff email keyserver. Note that your
particular installation of GnuPG may have other keyserver types
available as well. Keyserver schemes are case-insensitive. After the
keyserver name, optional keyserver configuration options may be
provided. These are the same as the global @option{--keyserver-options}
from below, but apply only to this particular keyserver.
Most keyservers synchronize with each other, so there is generally no
need to send keys to more than one server. The keyserver
@code{hkp://keys.gnupg.net} uses round robin DNS to give a different
keyserver each time you use it.
@item --keyserver-options @code{name=value1 }
@opindex keyserver-options
This is a space or comma delimited string that gives options for the
keyserver. Options can be prefixed with a `no-' to give the opposite
meaning. Valid import-options or export-options may be used here as
well to apply to importing (@option{--recv-key}) or exporting
(@option{--send-key}) a key from a keyserver. While not all options
are available for all keyserver types, some common options are:
@table @asis
@item include-revoked
When searching for a key with @option{--search-keys}, include keys that
are marked on the keyserver as revoked. Note that not all keyservers
differentiate between revoked and unrevoked keys, and for such
keyservers this option is meaningless. Note also that most keyservers do
not have cryptographic verification of key revocations, and so turning
this option off may result in skipping keys that are incorrectly marked
as revoked.
@item include-disabled
When searching for a key with @option{--search-keys}, include keys that
are marked on the keyserver as disabled. Note that this option is not
used with HKP keyservers.
@item auto-key-retrieve
This option enables the automatic retrieving of keys from a keyserver
when verifying signatures made by keys that are not on the local
keyring.
Note that this option makes a "web bug" like behavior possible.
Keyserver operators can see which keys you request, so by sending you
a message signed by a brand new key (which you naturally will not have
on your local keyring), the operator can tell both your IP address and
the time when you verified the signature.
@item honor-keyserver-url
When using @option{--refresh-keys}, if the key in question has a preferred
keyserver URL, then use that preferred keyserver to refresh the key
from. In addition, if auto-key-retrieve is set, and the signature
being verified has a preferred keyserver URL, then use that preferred
keyserver to fetch the key from. Defaults to yes.
@item honor-pka-record
If auto-key-retrieve is set, and the signature being verified has a
PKA record, then use the PKA information to fetch the key. Defaults
to yes.
@item include-subkeys
When receiving a key, include subkeys as potential targets. Note that
this option is not used with HKP keyservers, as they do not support
retrieving keys by subkey id.
@item use-temp-files
On most Unix-like platforms, GnuPG communicates with the keyserver
helper program via pipes, which is the most efficient method. This
option forces GnuPG to use temporary files to communicate. On some
platforms (such as Win32 and RISC OS), this option is always enabled.
@item keep-temp-files
If using `use-temp-files', do not delete the temp files after using
them. This option is useful to learn the keyserver communication
protocol by reading the temporary files.
@item verbose
Tell the keyserver helper program to be more verbose. This option can
be repeated multiple times to increase the verbosity level.
@item timeout
Tell the keyserver helper program how long (in seconds) to try and
perform a keyserver action before giving up. Note that performing
multiple actions at the same time uses this timeout value per action.
For example, when retrieving multiple keys via @option{--recv-keys}, the
timeout applies separately to each key retrieval, and not to the
@option{--recv-keys} command as a whole. Defaults to 30 seconds.
@item http-proxy=@code{value}
Set the proxy to use for HTTP and HKP keyservers. This overrides the
"http_proxy" environment variable, if any.
@ifclear gpgtwoone
@item max-cert-size
When retrieving a key via DNS CERT, only accept keys up to this size.
Defaults to 16384 bytes.
@end ifclear
@item debug
Turn on debug output in the keyserver helper program. Note that the
details of debug output depends on which keyserver helper program is
being used, and in turn, on any libraries that the keyserver helper
program uses internally (libcurl, openldap, etc).
@item check-cert
Enable certificate checking if the keyserver presents one (for hkps or
ldaps). Defaults to on.
@item ca-cert-file
Provide a certificate store to override the system default. Only
necessary if check-cert is enabled, and the keyserver is using a
certificate that is not present in a system default certificate list.
Note that depending on the SSL library that the keyserver helper is
built with, this may actually be a directory or a file.
@end table
@item --completes-needed @code{n}
@opindex compliant-needed
Number of completely trusted users to introduce a new
key signer (defaults to 1).
@item --marginals-needed @code{n}
@opindex marginals-needed
Number of marginally trusted users to introduce a new
key signer (defaults to 3)
@item --max-cert-depth @code{n}
@opindex max-cert-depth
Maximum depth of a certification chain (default is 5).
@ifclear gpgtwoone
@item --simple-sk-checksum
@opindex simple-sk-checksum
Secret keys are integrity protected by using a SHA-1 checksum. This
method is part of the upcoming enhanced OpenPGP specification but
GnuPG already uses it as a countermeasure against certain attacks.
Old applications don't understand this new format, so this option may
be used to switch back to the old behaviour. Using this option bears
a security risk. Note that using this option only takes effect when
the secret key is encrypted - the simplest way to make this happen is
to change the passphrase on the key (even changing it to the same
value is acceptable).
@end ifclear
@item --no-sig-cache
@opindex no-sig-cache
Do not cache the verification status of key signatures.
Caching gives a much better performance in key listings. However, if
you suspect that your public keyring is not save against write
modifications, you can use this option to disable the caching. It
probably does not make sense to disable it because all kind of damage
can be done if someone else has write access to your public keyring.
@item --no-sig-create-check
@opindex no-sig-create-check
GnuPG normally verifies each signature right after creation to protect
against bugs and hardware malfunctions which could leak out bits from
the secret key. This extra verification needs some time (about 115%
for DSA keys), and so this option can be used to disable it.
However, due to the fact that the signature creation needs manual
interaction, this performance penalty does not matter in most settings.
@item --auto-check-trustdb
@itemx --no-auto-check-trustdb
@opindex auto-check-trustdb
If GnuPG feels that its information about the Web of Trust has to be
updated, it automatically runs the @option{--check-trustdb} command
internally. This may be a time consuming
process. @option{--no-auto-check-trustdb} disables this option.
@item --use-agent
@itemx --no-use-agent
@opindex use-agent
@ifclear gpgone
This is dummy option. @command{@gpgname} always requires the agent.
@end ifclear
@ifset gpgone
Try to use the GnuPG-Agent. With this option, GnuPG first tries to
connect to the agent before it asks for a
passphrase. @option{--no-use-agent} disables this option.
@end ifset
@item --gpg-agent-info
@opindex gpg-agent-info
@ifclear gpgone
This is dummy option. It has no effect when used with @command{gpg2}.
@end ifclear
@ifset gpgone
Override the value of the environment variable
@samp{GPG_AGENT_INFO}. This is only used when @option{--use-agent} has
been given. Given that this option is not anymore used by
@command{gpg2}, it should be avoided if possible.
@end ifset
@ifclear gpgone
@item --agent-program @var{file}
@opindex agent-program
Specify an agent program to be used for secret key operations. The
default value is the @file{/usr/bin/gpg-agent}. This is only used
as a fallback when the environment variable @code{GPG_AGENT_INFO} is not
set or a running agent cannot be connected.
@end ifclear
@ifset gpgtwoone
@item --dirmngr-program @var{file}
@opindex dirmngr-program
Specify a dirmngr program to be used for keyserver access. The
default value is @file{/usr/sbin/dirmngr}. This is only used as a
fallback when the environment variable @code{DIRMNGR_INFO} is not set or
a running dirmngr cannot be connected.
@end ifset
@item --lock-once
@opindex lock-once
Lock the databases the first time a lock is requested
and do not release the lock until the process
terminates.
@item --lock-multiple
@opindex lock-multiple
Release the locks every time a lock is no longer
needed. Use this to override a previous @option{--lock-once}
from a config file.
@item --lock-never
@opindex lock-never
Disable locking entirely. This option should be used only in very
special environments, where it can be assured that only one process
is accessing those files. A bootable floppy with a stand-alone
encryption system will probably use this. Improper usage of this
option may lead to data and key corruption.
@item --exit-on-status-write-error
@opindex exit-on-status-write-error
This option will cause write errors on the status FD to immediately
terminate the process. That should in fact be the default but it never
worked this way and thus we need an option to enable this, so that the
change won't break applications which close their end of a status fd
connected pipe too early. Using this option along with
@option{--enable-progress-filter} may be used to cleanly cancel long
running gpg operations.
@item --limit-card-insert-tries @code{n}
@opindex limit-card-insert-tries
With @code{n} greater than 0 the number of prompts asking to insert a
smartcard gets limited to N-1. Thus with a value of 1 gpg won't at
all ask to insert a card if none has been inserted at startup. This
option is useful in the configuration file in case an application does
not know about the smartcard support and waits ad infinitum for an
inserted card.
@item --no-random-seed-file
@opindex no-random-seed-file
GnuPG uses a file to store its internal random pool over invocations.
This makes random generation faster; however sometimes write operations
are not desired. This option can be used to achieve that with the cost of
slower random generation.
@item --no-greeting
@opindex no-greeting
Suppress the initial copyright message.
@item --no-secmem-warning
@opindex no-secmem-warning
Suppress the warning about "using insecure memory".
@item --no-permission-warning
@opindex permission-warning
Suppress the warning about unsafe file and home directory (@option{--homedir})
permissions. Note that the permission checks that GnuPG performs are
not intended to be authoritative, but rather they simply warn about
certain common permission problems. Do not assume that the lack of a
warning means that your system is secure.
Note that the warning for unsafe @option{--homedir} permissions cannot be
suppressed in the gpg.conf file, as this would allow an attacker to
place an unsafe gpg.conf file in place, and use this file to suppress
warnings about itself. The @option{--homedir} permissions warning may only be
suppressed on the command line.
@item --no-mdc-warning
@opindex no-mdc-warning
Suppress the warning about missing MDC integrity protection.
@item --require-secmem
@itemx --no-require-secmem
@opindex require-secmem
Refuse to run if GnuPG cannot get secure memory. Defaults to no
(i.e. run, but give a warning).
@item --require-cross-certification
@itemx --no-require-cross-certification
@opindex require-cross-certification
When verifying a signature made from a subkey, ensure that the cross
certification "back signature" on the subkey is present and valid. This
protects against a subtle attack against subkeys that can sign.
Defaults to @option{--require-cross-certification} for
@command{@gpgname}.
@item --expert
@itemx --no-expert
@opindex expert
Allow the user to do certain nonsensical or "silly" things like
signing an expired or revoked key, or certain potentially incompatible
things like generating unusual key types. This also disables certain
warning messages about potentially incompatible actions. As the name
implies, this option is for experts only. If you don't fully
understand the implications of what it allows you to do, leave this
off. @option{--no-expert} disables this option.
@end table
@c *******************************************
@c ******** KEY RELATED OPTIONS ************
@c *******************************************
@node GPG Key related Options
@subsection Key related options
@table @gnupgtabopt
@item --recipient @var{name}
@itemx -r
@opindex recipient
Encrypt for user id @var{name}. If this option or
@option{--hidden-recipient} is not specified, GnuPG asks for the user-id
unless @option{--default-recipient} is given.
@item --hidden-recipient @var{name}
@itemx -R
@opindex hidden-recipient
Encrypt for user ID @var{name}, but hide the key ID of this user's
key. This option helps to hide the receiver of the message and is a
limited countermeasure against traffic analysis. If this option or
@option{--recipient} is not specified, GnuPG asks for the user ID unless
@option{--default-recipient} is given.
@item --encrypt-to @code{name}
@opindex encrypt-to
Same as @option{--recipient} but this one is intended for use in the
options file and may be used with your own user-id as an
"encrypt-to-self". These keys are only used when there are other
recipients given either by use of @option{--recipient} or by the asked
user id. No trust checking is performed for these user ids and even
disabled keys can be used.
@item --hidden-encrypt-to @code{name}
@opindex hidden-encrypt-to
Same as @option{--hidden-recipient} but this one is intended for use in the
options file and may be used with your own user-id as a hidden
"encrypt-to-self". These keys are only used when there are other
recipients given either by use of @option{--recipient} or by the asked user id.
No trust checking is performed for these user ids and even disabled
keys can be used.
@item --no-encrypt-to
@opindex no-encrypt-to
Disable the use of all @option{--encrypt-to} and
@option{--hidden-encrypt-to} keys.
@item --group @code{name=value1 }
@opindex group
Sets up a named group, which is similar to aliases in email programs.
Any time the group name is a recipient (@option{-r} or
@option{--recipient}), it will be expanded to the values
specified. Multiple groups with the same name are automatically merged
into a single group.
The values are @code{key IDs} or fingerprints, but any key description
is accepted. Note that a value with spaces in it will be treated as
two different values. Note also there is only one level of expansion
--- you cannot make an group that points to another group. When used
from the command line, it may be necessary to quote the argument to
this option to prevent the shell from treating it as multiple
arguments.
@item --ungroup @code{name}
@opindex ungroup
Remove a given entry from the @option{--group} list.
@item --no-groups
@opindex no-groups
Remove all entries from the @option{--group} list.
@item --local-user @var{name}
@itemx -u
@opindex local-user
Use @var{name} as the key to sign with. Note that this option overrides
@option{--default-key}.
@ifset gpgtwoone
@item --try-secret-key @var{name}
@opindex try-secret-key
For hidden recipients GPG needs to know the keys to use for trial
decryption. The key set with @option{--default-key} is always tried
first, but this is often not sufficient. This option allows to set more
keys to be used for trial decryption. Although any valid user-id
specification may be used for @var{name} it makes sense to use at least
the long keyid to avoid ambiguities. Note that gpg-agent might pop up a
pinentry for a lot keys to do the trial decryption. If you want to stop
all further trial decryption you may use close-window button instead of
the cancel button.
@end ifset
@item --try-all-secrets
@opindex try-all-secrets
Don't look at the key ID as stored in the message but try all secret
keys in turn to find the right decryption key. This option forces the
behaviour as used by anonymous recipients (created by using
@option{--throw-keyids} or @option{--hidden-recipient}) and might come
handy in case where an encrypted message contains a bogus key ID.
@item --skip-hidden-recipients
@itemx --no-skip-hidden-recipients
@opindex skip-hidden-recipients
@opindex no-skip-hidden-recipients
During decryption skip all anonymous recipients. This option helps in
the case that people use the hidden recipients feature to hide there
own encrypt-to key from others. If oneself has many secret keys this
may lead to a major annoyance because all keys are tried in turn to
decrypt soemthing which was not really intended for it. The drawback
of this option is that it is currently not possible to decrypt a
message which includes real anonymous recipients.
@end table
@c *******************************************
@c ******** INPUT AND OUTPUT ***************
@c *******************************************
@node GPG Input and Output
@subsection Input and Output
@table @gnupgtabopt
@item --armor
@itemx -a
@opindex armor
Create ASCII armored output. The default is to create the binary
OpenPGP format.
@item --no-armor
@opindex no-armor
Assume the input data is not in ASCII armored format.
@item --output @var{file}
@itemx -o @var{file}
@opindex output
Write output to @var{file}.
@item --max-output @code{n}
@opindex max-output
This option sets a limit on the number of bytes that will be generated
when processing a file. Since OpenPGP supports various levels of
compression, it is possible that the plaintext of a given message may be
significantly larger than the original OpenPGP message. While GnuPG
works properly with such messages, there is often a desire to set a
maximum file size that will be generated before processing is forced to
stop by the OS limits. Defaults to 0, which means "no limit".
@item --import-options @code{parameters}
@opindex import-options
This is a space or comma delimited string that gives options for
importing keys. Options can be prepended with a `no-' to give the
opposite meaning. The options are:
@table @asis
@item import-local-sigs
Allow importing key signatures marked as "local". This is not
generally useful unless a shared keyring scheme is being used.
Defaults to no.
@item repair-pks-subkey-bug
During import, attempt to repair the damage caused by the PKS keyserver
bug (pre version 0.9.6) that mangles keys with multiple subkeys. Note
that this cannot completely repair the damaged key as some crucial data
is removed by the keyserver, but it does at least give you back one
subkey. Defaults to no for regular @option{--import} and to yes for
keyserver @option{--recv-keys}.
@item merge-only
During import, allow key updates to existing keys, but do not allow
any new keys to be imported. Defaults to no.
@item import-clean
After import, compact (remove all signatures except the
self-signature) any user IDs from the new key that are not usable.
Then, remove any signatures from the new key that are not usable.
This includes signatures that were issued by keys that are not present
on the keyring. This option is the same as running the @option{--edit-key}
command "clean" after import. Defaults to no.
@item import-minimal
Import the smallest key possible. This removes all signatures except
the most recent self-signature on each user ID. This option is the
same as running the @option{--edit-key} command "minimize" after import.
Defaults to no.
@end table
@item --export-options @code{parameters}
@opindex export-options
This is a space or comma delimited string that gives options for
exporting keys. Options can be prepended with a `no-' to give the
opposite meaning. The options are:
@table @asis
@item export-local-sigs
Allow exporting key signatures marked as "local". This is not
generally useful unless a shared keyring scheme is being used.
Defaults to no.
@item export-attributes
Include attribute user IDs (photo IDs) while exporting. This is
useful to export keys if they are going to be used by an OpenPGP
program that does not accept attribute user IDs. Defaults to yes.
@item export-sensitive-revkeys
Include designated revoker information that was marked as
"sensitive". Defaults to no.
@c Since GnuPG 2.1 gpg-agent manages the secret key and thus the
@c export-reset-subkey-passwd hack is not anymore justified. Such use
@c cases need to be implemented using a specialized secret key export
@c tool.
@ifclear gpgtwoone
@item export-reset-subkey-passwd
When using the @option{--export-secret-subkeys} command, this option resets
the passphrases for all exported subkeys to empty. This is useful
when the exported subkey is to be used on an unattended machine where
a passphrase doesn't necessarily make sense. Defaults to no.
@end ifclear
@item export-clean
Compact (remove all signatures from) user IDs on the key being
exported if the user IDs are not usable. Also, do not export any
signatures that are not usable. This includes signatures that were
issued by keys that are not present on the keyring. This option is
the same as running the @option{--edit-key} command "clean" before export
except that the local copy of the key is not modified. Defaults to
no.
@item export-minimal
Export the smallest key possible. This removes all signatures except the
most recent self-signature on each user ID. This option is the same as
running the @option{--edit-key} command "minimize" before export except
that the local copy of the key is not modified. Defaults to no.
@end table
@item --with-colons
@opindex with-colons
Print key listings delimited by colons. Note that the output will be
encoded in UTF-8 regardless of any @option{--display-charset} setting. This
format is useful when GnuPG is called from scripts and other programs
as it is easily machine parsed. The details of this format are
documented in the file @file{doc/DETAILS}, which is included in the GnuPG
source distribution.
@item --fixed-list-mode
@opindex fixed-list-mode
Do not merge primary user ID and primary key in @option{--with-colon}
listing mode and print all timestamps as seconds since 1970-01-01.
@ifclear gpgone
Since GnuPG 2.0.10, this mode is always used and thus this option is
obsolete; it does not harm to use it though.
@end ifclear
@ifset gpgtwoone
@item --legacy-list-mode
@opindex legacy-list-mode
Revert to the pre-2.1 public key list mode. This only affects the
human readable output and not the machine interface
(i.e. @code{--with-colons}). Note that the legacy format does not
allow to convey suitable information for elliptic curves.
@end ifset
@item --with-fingerprint
@opindex with-fingerprint
Same as the command @option{--fingerprint} but changes only the format
of the output and may be used together with another command.
@ifset gpgtwoone
@item --with-keygrip
@opindex with-keygrip
Include the keygrip in the key listings.
@end ifset
@end table
@c *******************************************
@c ******** OPENPGP OPTIONS ****************
@c *******************************************
@node OpenPGP Options
@subsection OpenPGP protocol specific options.
@table @gnupgtabopt
@item -t, --textmode
@itemx --no-textmode
@opindex textmode
Treat input files as text and store them in the OpenPGP canonical text
form with standard "CRLF" line endings. This also sets the necessary
flags to inform the recipient that the encrypted or signed data is text
and may need its line endings converted back to whatever the local
system uses. This option is useful when communicating between two
platforms that have different line ending conventions (UNIX-like to Mac,
Mac to Windows, etc). @option{--no-textmode} disables this option, and
is the default.
@ifset gpgone
If @option{-t} (but not @option{--textmode}) is used together with
armoring and signing, this enables clearsigned messages. This kludge is
needed for command-line compatibility with command-line versions of PGP;
normally you would use @option{--sign} or @option{--clearsign} to select
the type of the signature.
@end ifset
@item --force-v3-sigs
@itemx --no-force-v3-sigs
@opindex force-v3-sigs
OpenPGP states that an implementation should generate v4 signatures
but PGP versions 5 through 7 only recognize v4 signatures on key
material. This option forces v3 signatures for signatures on data.
Note that this option implies @option{--no-ask-sig-expire}, and unsets
@option{--sig-policy-url}, @option{--sig-notation}, and
@option{--sig-keyserver-url}, as these features cannot be used with v3
signatures. @option{--no-force-v3-sigs} disables this option.
Defaults to no.
@item --force-v4-certs
@itemx --no-force-v4-certs
@opindex force-v4-certs
Always use v4 key signatures even on v3 keys. This option also
changes the default hash algorithm for v3 RSA keys from MD5 to SHA-1.
@option{--no-force-v4-certs} disables this option.
@item --force-mdc
@opindex force-mdc
Force the use of encryption with a modification detection code. This
is always used with the newer ciphers (those with a blocksize greater
than 64 bits), or if all of the recipient keys indicate MDC support in
their feature flags.
@item --disable-mdc
@opindex disable-mdc
Disable the use of the modification detection code. Note that by
using this option, the encrypted message becomes vulnerable to a
message modification attack.
@item --personal-cipher-preferences @code{string}
@opindex personal-cipher-preferences
Set the list of personal cipher preferences to @code{string}. Use
@command{@gpgname --version} to get a list of available algorithms,
and use @code{none} to set no preference at all. This allows the user
to safely override the algorithm chosen by the recipient key
preferences, as GPG will only select an algorithm that is usable by
all recipients. The most highly ranked cipher in this list is also
used for the @option{--symmetric} encryption command.
@item --personal-digest-preferences @code{string}
@opindex personal-digest-preferences
Set the list of personal digest preferences to @code{string}. Use
@command{@gpgname --version} to get a list of available algorithms,
and use @code{none} to set no preference at all. This allows the user
to safely override the algorithm chosen by the recipient key
preferences, as GPG will only select an algorithm that is usable by
all recipients. The most highly ranked digest algorithm in this list
is also used when signing without encryption
(e.g. @option{--clearsign} or @option{--sign}).
@item --personal-compress-preferences @code{string}
@opindex personal-compress-preferences
Set the list of personal compression preferences to @code{string}.
Use @command{@gpgname --version} to get a list of available
algorithms, and use @code{none} to set no preference at all. This
allows the user to safely override the algorithm chosen by the
recipient key preferences, as GPG will only select an algorithm that
is usable by all recipients. The most highly ranked compression
algorithm in this list is also used when there are no recipient keys
to consider (e.g. @option{--symmetric}).
@item --s2k-cipher-algo @code{name}
@opindex s2k-cipher-algo
Use @code{name} as the cipher algorithm used to protect secret keys.
The default cipher is CAST5. This cipher is also used for
conventional encryption if @option{--personal-cipher-preferences} and
@option{--cipher-algo} is not given.
@item --s2k-digest-algo @code{name}
@opindex s2k-digest-algo
Use @code{name} as the digest algorithm used to mangle the passphrases.
The default algorithm is SHA-1.
@item --s2k-mode @code{n}
@opindex s2k-mode
Selects how passphrases are mangled. If @code{n} is 0 a plain
passphrase (which is not recommended) will be used, a 1 adds a salt to
the passphrase and a 3 (the default) iterates the whole process a
number of times (see --s2k-count). Unless @option{--rfc1991} is used,
this mode is also used for conventional encryption.
@item --s2k-count @code{n}
@opindex s2k-count
Specify how many times the passphrase mangling is repeated. This
value may range between 1024 and 65011712 inclusive. The default is
inquired from gpg-agent. Note that not all values in the
1024-65011712 range are legal and if an illegal value is selected,
GnuPG will round up to the nearest legal value. This option is only
meaningful if @option{--s2k-mode} is 3.
@end table
@c ***************************
@c ******* Compliance ********
@c ***************************
@node Compliance Options
@subsection Compliance options
These options control what GnuPG is compliant to. Only one of these
options may be active at a time. Note that the default setting of
this is nearly always the correct one. See the INTEROPERABILITY WITH
OTHER OPENPGP PROGRAMS section below before using one of these
options.
@table @gnupgtabopt
@item --gnupg
@opindex gnupg
Use standard GnuPG behavior. This is essentially OpenPGP behavior
(see @option{--openpgp}), but with some additional workarounds for common
compatibility problems in different versions of PGP. This is the
default option, so it is not generally needed, but it may be useful to
override a different compliance option in the gpg.conf file.
@item --openpgp
@opindex openpgp
Reset all packet, cipher and digest options to strict OpenPGP
behavior. Use this option to reset all previous options like
@option{--s2k-*}, @option{--cipher-algo}, @option{--digest-algo} and
@option{--compress-algo} to OpenPGP compliant values. All PGP
workarounds are disabled.
@item --rfc4880
@opindex rfc4880
Reset all packet, cipher and digest options to strict RFC-4880
behavior. Note that this is currently the same thing as
@option{--openpgp}.
@item --rfc2440
@opindex rfc2440
Reset all packet, cipher and digest options to strict RFC-2440
behavior.
@item --rfc1991
@opindex rfc1991
Try to be more RFC-1991 (PGP 2.x) compliant.
@item --pgp2
@opindex pgp2
Set up all options to be as PGP 2.x compliant as possible, and warn if
an action is taken (e.g. encrypting to a non-RSA key) that will create
a message that PGP 2.x will not be able to handle. Note that `PGP
2.x' here means `MIT PGP 2.6.2'. There are other versions of PGP 2.x
available, but the MIT release is a good common baseline.
This option implies @option{--rfc1991 --disable-mdc
--no-force-v4-certs --escape-from-lines --force-v3-sigs
--allow-weak-digest-algos --cipher-algo IDEA --digest-algo
MD5--compress-algo ZIP}. It also disables @option{--textmode} when
encrypting.
@item --pgp6
@opindex pgp6
Set up all options to be as PGP 6 compliant as possible. This
restricts you to the ciphers IDEA (if the IDEA plugin is installed),
3DES, and CAST5, the hashes MD5, SHA1 and RIPEMD160, and the
compression algorithms none and ZIP. This also disables
--throw-keyids, and making signatures with signing subkeys as PGP 6
does not understand signatures made by signing subkeys.
This option implies @option{--disable-mdc --escape-from-lines
--force-v3-sigs}.
@item --pgp7
@opindex pgp7
Set up all options to be as PGP 7 compliant as possible. This is
identical to @option{--pgp6} except that MDCs are not disabled, and the
list of allowable ciphers is expanded to add AES128, AES192, AES256, and
TWOFISH.
@item --pgp8
@opindex pgp8
Set up all options to be as PGP 8 compliant as possible. PGP 8 is a lot
closer to the OpenPGP standard than previous versions of PGP, so all
this does is disable @option{--throw-keyids} and set
@option{--escape-from-lines}. All algorithms are allowed except for the
SHA224, SHA384, and SHA512 digests.
@end table
@c *******************************************
@c ******** ESOTERIC OPTIONS ***************
@c *******************************************
@node GPG Esoteric Options
@subsection Doing things one usually doesn't want to do.
@table @gnupgtabopt
@item -n
@itemx --dry-run
@opindex dry-run
Don't make any changes (this is not completely implemented).
@item --list-only
@opindex list-only
Changes the behaviour of some commands. This is like @option{--dry-run} but
different in some cases. The semantic of this command may be extended in
the future. Currently it only skips the actual decryption pass and
therefore enables a fast listing of the encryption keys.
@item -i
@itemx --interactive
@opindex interactive
Prompt before overwriting any files.
@item --debug-level @var{level}
@opindex debug-level
Select the debug level for investigating problems. @var{level} may be
a numeric value or by a keyword:
@table @code
@item none
No debugging at all. A value of less than 1 may be used instead of
the keyword.
@item basic
Some basic debug messages. A value between 1 and 2 may be used
instead of the keyword.
@item advanced
More verbose debug messages. A value between 3 and 5 may be used
instead of the keyword.
@item expert
Even more detailed messages. A value between 6 and 8 may be used
instead of the keyword.
@item guru
All of the debug messages you can get. A value greater than 8 may be
used instead of the keyword. The creation of hash tracing files is
only enabled if the keyword is used.
@end table
How these messages are mapped to the actual debugging flags is not
specified and may change with newer releases of this program. They are
however carefully selected to best aid in debugging.
@item --debug @var{flags}
@opindex debug
Set debugging flags. All flags are or-ed and @var{flags} may
be given in C syntax (e.g. 0x0042).
@item --debug-all
@opindex debug-all
Set all useful debugging flags.
@ifset gpgone
@item --debug-ccid-driver
@opindex debug-ccid-driver
Enable debug output from the included CCID driver for smartcards.
Note that this option is only available on some system.
@end ifset
@item --faked-system-time @var{epoch}
@opindex faked-system-time
This option is only useful for testing; it sets the system time back or
forth to @var{epoch} which is the number of seconds elapsed since the year
1970. Alternatively @var{epoch} may be given as a full ISO time string
(e.g. "20070924T154812").
@item --enable-progress-filter
@opindex enable-progress-filter
Enable certain PROGRESS status outputs. This option allows frontends
to display a progress indicator while gpg is processing larger files.
There is a slight performance overhead using it.
@item --status-fd @code{n}
@opindex status-fd
Write special status strings to the file descriptor @code{n}.
See the file DETAILS in the documentation for a listing of them.
@item --status-file @code{file}
@opindex status-file
Same as @option{--status-fd}, except the status data is written to file
@code{file}.
@item --logger-fd @code{n}
@opindex logger-fd
Write log output to file descriptor @code{n} and not to STDERR.
@item --log-file @code{file}
@itemx --logger-file @code{file}
@opindex log-file
Same as @option{--logger-fd}, except the logger data is written to file
@code{file}. Note that @option{--log-file} is only implemented for
GnuPG-2.
@item --attribute-fd @code{n}
@opindex attribute-fd
Write attribute subpackets to the file descriptor @code{n}. This is most
useful for use with @option{--status-fd}, since the status messages are
needed to separate out the various subpackets from the stream delivered
to the file descriptor.
@item --attribute-file @code{file}
@opindex attribute-file
Same as @option{--attribute-fd}, except the attribute data is written to
file @code{file}.
@item --comment @code{string}
@itemx --no-comments
@opindex comment
Use @code{string} as a comment string in clear text signatures and ASCII
armored messages or keys (see @option{--armor}). The default behavior is
not to use a comment string. @option{--comment} may be repeated multiple
times to get multiple comment strings. @option{--no-comments} removes
all comments. It is a good idea to keep the length of a single comment
below 60 characters to avoid problems with mail programs wrapping such
lines. Note that comment lines, like all other header lines, are not
protected by the signature.
@item --emit-version
@itemx --no-emit-version
@opindex emit-version
Force inclusion of the version string in ASCII armored output. If
given once only the name of the program and the major number is
emitted (default), given twice the minor is also emitted, given triple
the micro is added, and given quad an operating system identification
is also emitted. @option{--no-emit-version} disables the version
line.
@item --sig-notation @code{name=value}
@itemx --cert-notation @code{name=value}
@itemx -N, --set-notation @code{name=value}
@opindex sig-notation
@opindex cert-notation
@opindex set-notation
Put the name value pair into the signature as notation data.
@code{name} must consist only of printable characters or spaces, and
must contain a '@@' character in the form keyname@@domain.example.com
(substituting the appropriate keyname and domain name, of course). This
is to help prevent pollution of the IETF reserved notation
namespace. The @option{--expert} flag overrides the '@@'
check. @code{value} may be any printable string; it will be encoded in
UTF8, so you should check that your @option{--display-charset} is set
correctly. If you prefix @code{name} with an exclamation mark (!), the
notation data will be flagged as critical
(rfc4880:5.2.3.16). @option{--sig-notation} sets a notation for data
signatures. @option{--cert-notation} sets a notation for key signatures
(certifications). @option{--set-notation} sets both.
There are special codes that may be used in notation names. "%k" will
be expanded into the key ID of the key being signed, "%K" into the
long key ID of the key being signed, "%f" into the fingerprint of the
key being signed, "%s" into the key ID of the key making the
signature, "%S" into the long key ID of the key making the signature,
"%g" into the fingerprint of the key making the signature (which might
be a subkey), "%p" into the fingerprint of the primary key of the key
making the signature, "%c" into the signature count from the OpenPGP
smartcard, and "%%" results in a single "%". %k, %K, and %f are only
meaningful when making a key signature (certification), and %c is only
meaningful when using the OpenPGP smartcard.
@item --sig-policy-url @code{string}
@itemx --cert-policy-url @code{string}
@itemx --set-policy-url @code{string}
@opindex sig-policy-url
@opindex cert-policy-url
@opindex set-policy-url
Use @code{string} as a Policy URL for signatures (rfc4880:5.2.3.20). If
you prefix it with an exclamation mark (!), the policy URL packet will
be flagged as critical. @option{--sig-policy-url} sets a policy url for
data signatures. @option{--cert-policy-url} sets a policy url for key
signatures (certifications). @option{--set-policy-url} sets both.
The same %-expandos used for notation data are available here as well.
@item --sig-keyserver-url @code{string}
@opindex sig-keyserver-url
Use @code{string} as a preferred keyserver URL for data signatures. If
you prefix it with an exclamation mark (!), the keyserver URL packet
will be flagged as critical.
The same %-expandos used for notation data are available here as well.
@item --set-filename @code{string}
@opindex set-filename
Use @code{string} as the filename which is stored inside messages.
This overrides the default, which is to use the actual filename of the
file being encrypted.
@item --for-your-eyes-only
@itemx --no-for-your-eyes-only
@opindex for-your-eyes-only
Set the `for your eyes only' flag in the message. This causes GnuPG to
refuse to save the file unless the @option{--output} option is given,
and PGP to use a "secure viewer" with a claimed Tempest-resistant font
to display the message. This option overrides @option{--set-filename}.
@option{--no-for-your-eyes-only} disables this option.
@item --use-embedded-filename
@itemx --no-use-embedded-filename
@opindex use-embedded-filename
Try to create a file with a name as embedded in the data. This can be
a dangerous option as it allows to overwrite files. Defaults to no.
@item --cipher-algo @code{name}
@opindex cipher-algo
Use @code{name} as cipher algorithm. Running the program with the
command @option{--version} yields a list of supported algorithms. If
this is not used the cipher algorithm is selected from the preferences
stored with the key. In general, you do not want to use this option as
it allows you to violate the OpenPGP standard.
@option{--personal-cipher-preferences} is the safe way to accomplish the
same thing.
@item --digest-algo @code{name}
@opindex digest-algo
Use @code{name} as the message digest algorithm. Running the program
with the command @option{--version} yields a list of supported algorithms. In
general, you do not want to use this option as it allows you to
violate the OpenPGP standard. @option{--personal-digest-preferences} is the
safe way to accomplish the same thing.
@item --compress-algo @code{name}
@opindex compress-algo
Use compression algorithm @code{name}. "zlib" is RFC-1950 ZLIB
compression. "zip" is RFC-1951 ZIP compression which is used by PGP.
"bzip2" is a more modern compression scheme that can compress some
things better than zip or zlib, but at the cost of more memory used
during compression and decompression. "uncompressed" or "none"
disables compression. If this option is not used, the default
behavior is to examine the recipient key preferences to see which
algorithms the recipient supports. If all else fails, ZIP is used for
maximum compatibility.
ZLIB may give better compression results than ZIP, as the compression
window size is not limited to 8k. BZIP2 may give even better
compression results than that, but will use a significantly larger
amount of memory while compressing and decompressing. This may be
significant in low memory situations. Note, however, that PGP (all
versions) only supports ZIP compression. Using any algorithm other
than ZIP or "none" will make the message unreadable with PGP. In
general, you do not want to use this option as it allows you to
violate the OpenPGP standard. @option{--personal-compress-preferences} is the
safe way to accomplish the same thing.
@item --cert-digest-algo @code{name}
@opindex cert-digest-algo
Use @code{name} as the message digest algorithm used when signing a
key. Running the program with the command @option{--version} yields a
list of supported algorithms. Be aware that if you choose an algorithm
that GnuPG supports but other OpenPGP implementations do not, then some
users will not be able to use the key signatures you make, or quite
possibly your entire key.
@item --disable-cipher-algo @code{name}
@opindex disable-cipher-algo
Never allow the use of @code{name} as cipher algorithm.
The given name will not be checked so that a later loaded algorithm
will still get disabled.
@item --disable-pubkey-algo @code{name}
@opindex disable-pubkey-algo
Never allow the use of @code{name} as public key algorithm.
The given name will not be checked so that a later loaded algorithm
will still get disabled.
@item --throw-keyids
@itemx --no-throw-keyids
@opindex throw-keyids
Do not put the recipient key IDs into encrypted messages. This helps to
hide the receivers of the message and is a limited countermeasure
against traffic analysis.@footnote{Using a little social engineering
anyone who is able to decrypt the message can check whether one of the
other recipients is the one he suspects.} On the receiving side, it may
slow down the decryption process because all available secret keys must
be tried. @option{--no-throw-keyids} disables this option. This option
is essentially the same as using @option{--hidden-recipient} for all
recipients.
@item --not-dash-escaped
@opindex not-dash-escaped
This option changes the behavior of cleartext signatures
so that they can be used for patch files. You should not
send such an armored file via email because all spaces
and line endings are hashed too. You can not use this
option for data which has 5 dashes at the beginning of a
line, patch files don't have this. A special armor header
line tells GnuPG about this cleartext signature option.
@item --escape-from-lines
@itemx --no-escape-from-lines
@opindex escape-from-lines
Because some mailers change lines starting with "From " to ">From " it
is good to handle such lines in a special way when creating cleartext
signatures to prevent the mail system from breaking the signature. Note
that all other PGP versions do it this way too. Enabled by
default. @option{--no-escape-from-lines} disables this option.
@item --passphrase-repeat @code{n}
@opindex passphrase-repeat
Specify how many times @command{@gpgname} will request a new
passphrase be repeated. This is useful for helping memorize a
passphrase. Defaults to 1 repetition.
@item --passphrase-fd @code{n}
@opindex passphrase-fd
Read the passphrase from file descriptor @code{n}. Only the first line
will be read from file descriptor @code{n}. If you use 0 for @code{n},
the passphrase will be read from STDIN. This can only be used if only
one passphrase is supplied.
@ifclear gpgone
Note that this passphrase is only used if the option @option{--batch}
has also been given. This is different from @command{gpg}.
@end ifclear
@item --passphrase-file @code{file}
@opindex passphrase-file
Read the passphrase from file @code{file}. Only the first line will
be read from file @code{file}. This can only be used if only one
passphrase is supplied. Obviously, a passphrase stored in a file is
of questionable security if other users can read this file. Don't use
this option if you can avoid it.
@ifclear gpgone
Note that this passphrase is only used if the option @option{--batch}
has also been given. This is different from @command{gpg}.
@end ifclear
@item --passphrase @code{string}
@opindex passphrase
Use @code{string} as the passphrase. This can only be used if only one
passphrase is supplied. Obviously, this is of very questionable
security on a multi-user system. Don't use this option if you can
avoid it.
@ifclear gpgone
Note that this passphrase is only used if the option @option{--batch}
has also been given. This is different from @command{gpg}.
@end ifclear
@ifset gpgtwoone
@item --pinentry-mode @code{mode}
@opindex pinentry-mode
Set the pinentry mode to @code{mode}. Allowed values for @code{mode}
are:
@table @asis
@item default
Use the default of the agent, which is @code{ask}.
@item ask
Force the use of the Pinentry.
@item cancel
Emulate use of Pinentry's cancel button.
@item error
Return a Pinentry error (``No Pinentry'').
@item loopback
Redirect Pinentry queries to the caller. Note that in contrast to
Pinentry the user is not prompted again if he enters a bad password.
@end table
@end ifset
@item --command-fd @code{n}
@opindex command-fd
This is a replacement for the deprecated shared-memory IPC mode.
If this option is enabled, user input on questions is not expected
from the TTY but from the given file descriptor. It should be used
together with @option{--status-fd}. See the file doc/DETAILS in the source
distribution for details on how to use it.
@item --command-file @code{file}
@opindex command-file
Same as @option{--command-fd}, except the commands are read out of file
@code{file}
@item --allow-non-selfsigned-uid
@itemx --no-allow-non-selfsigned-uid
@opindex allow-non-selfsigned-uid
Allow the import and use of keys with user IDs which are not
self-signed. This is not recommended, as a non self-signed user ID is
trivial to forge. @option{--no-allow-non-selfsigned-uid} disables.
@item --allow-freeform-uid
@opindex allow-freeform-uid
Disable all checks on the form of the user ID while generating a new
one. This option should only be used in very special environments as
it does not ensure the de-facto standard format of user IDs.
@item --ignore-time-conflict
@opindex ignore-time-conflict
GnuPG normally checks that the timestamps associated with keys and
signatures have plausible values. However, sometimes a signature
seems to be older than the key due to clock problems. This option
makes these checks just a warning. See also @option{--ignore-valid-from} for
timestamp issues on subkeys.
@item --ignore-valid-from
@opindex ignore-valid-from
GnuPG normally does not select and use subkeys created in the future.
This option allows the use of such keys and thus exhibits the
pre-1.0.7 behaviour. You should not use this option unless there
is some clock problem. See also @option{--ignore-time-conflict} for timestamp
issues with signatures.
@item --ignore-crc-error
@opindex ignore-crc-error
The ASCII armor used by OpenPGP is protected by a CRC checksum against
transmission errors. Occasionally the CRC gets mangled somewhere on
the transmission channel but the actual content (which is protected by
the OpenPGP protocol anyway) is still okay. This option allows GnuPG
to ignore CRC errors.
@item --ignore-mdc-error
@opindex ignore-mdc-error
This option changes a MDC integrity protection failure into a warning.
This can be useful if a message is partially corrupt, but it is
necessary to get as much data as possible out of the corrupt message.
However, be aware that a MDC protection failure may also mean that the
message was tampered with intentionally by an attacker.
@item --allow-weak-digest-algos
@opindex allow-weak-digest-algos
Signatures made with the broken MD5 algorithm are normally rejected
with an ``invalid digest algorithm'' message. This option allows the
verification of signatures made with such weak algorithms.
@item --no-default-keyring
@opindex no-default-keyring
Do not add the default keyrings to the list of keyrings. Note that
GnuPG will not operate without any keyrings, so if you use this option
and do not provide alternate keyrings via @option{--keyring} or
@option{--secret-keyring}, then GnuPG will still use the default public or
secret keyrings.
@item --skip-verify
@opindex skip-verify
Skip the signature verification step. This may be
used to make the decryption faster if the signature
verification is not needed.
@item --with-key-data
@opindex with-key-data
Print key listings delimited by colons (like @option{--with-colons}) and
print the public key data.
@item --fast-list-mode
@opindex fast-list-mode
Changes the output of the list commands to work faster; this is achieved
by leaving some parts empty. Some applications don't need the user ID
and the trust information given in the listings. By using this options
they can get a faster listing. The exact behaviour of this option may
change in future versions. If you are missing some information, don't
use this option.
@item --no-literal
@opindex no-literal
This is not for normal use. Use the source to see for what it might be useful.
@item --set-filesize
@opindex set-filesize
This is not for normal use. Use the source to see for what it might be useful.
@item --show-session-key
@opindex show-session-key
Display the session key used for one message. See
@option{--override-session-key} for the counterpart of this option.
We think that Key Escrow is a Bad Thing; however the user should have
the freedom to decide whether to go to prison or to reveal the content
of one specific message without compromising all messages ever
encrypted for one secret key. DON'T USE IT UNLESS YOU ARE REALLY
FORCED TO DO SO.
@item --override-session-key @code{string}
@opindex override-session-key
Don't use the public key but the session key @code{string}. The format
of this string is the same as the one printed by
@option{--show-session-key}. This option is normally not used but comes
handy in case someone forces you to reveal the content of an encrypted
message; using this option you can do this without handing out the
secret key.
@item --ask-sig-expire
@itemx --no-ask-sig-expire
@opindex ask-sig-expire
When making a data signature, prompt for an expiration time. If this
option is not specified, the expiration time set via
@option{--default-sig-expire} is used. @option{--no-ask-sig-expire}
disables this option.
@item --default-sig-expire
@opindex default-sig-expire
The default expiration time to use for signature expiration. Valid
values are "0" for no expiration, a number followed by the letter d
(for days), w (for weeks), m (for months), or y (for years) (for
example "2m" for two months, or "5y" for five years), or an absolute
date in the form YYYY-MM-DD. Defaults to "0".
@item --ask-cert-expire
@itemx --no-ask-cert-expire
@opindex ask-cert-expire
When making a key signature, prompt for an expiration time. If this
option is not specified, the expiration time set via
@option{--default-cert-expire} is used. @option{--no-ask-cert-expire}
disables this option.
@item --default-cert-expire
@opindex default-cert-expire
The default expiration time to use for key signature expiration.
Valid values are "0" for no expiration, a number followed by the
letter d (for days), w (for weeks), m (for months), or y (for years)
(for example "2m" for two months, or "5y" for five years), or an
absolute date in the form YYYY-MM-DD. Defaults to "0".
@item --allow-secret-key-import
@opindex allow-secret-key-import
This is an obsolete option and is not used anywhere.
@item --allow-multiple-messages
@item --no-allow-multiple-messages
@opindex allow-multiple-messages
Allow processing of multiple OpenPGP messages contained in a single file
or stream. Some programs that call GPG are not prepared to deal with
multiple messages being processed together, so this option defaults to
no. Note that versions of GPG prior to 1.4.7 always allowed multiple
messages.
Warning: Do not use this option unless you need it as a temporary
workaround!
@item --enable-special-filenames
@opindex enable-special-filenames
This options enables a mode in which filenames of the form
@file{-&n}, where n is a non-negative decimal number,
refer to the file descriptor n and not to a file with that name.
@item --no-expensive-trust-checks
@opindex no-expensive-trust-checks
Experimental use only.
@item --preserve-permissions
@opindex preserve-permissions
Don't change the permissions of a secret keyring back to user
read/write only. Use this option only if you really know what you are doing.
@item --default-preference-list @code{string}
@opindex default-preference-list
Set the list of default preferences to @code{string}. This preference
list is used for new keys and becomes the default for "setpref" in the
edit menu.
@item --default-keyserver-url @code{name}
@opindex default-keyserver-url
Set the default keyserver URL to @code{name}. This keyserver will be
used as the keyserver URL when writing a new self-signature on a key,
which includes key generation and changing preferences.
@item --list-config
@opindex list-config
Display various internal configuration parameters of GnuPG. This option
is intended for external programs that call GnuPG to perform tasks, and
is thus not generally useful. See the file @file{doc/DETAILS} in the
source distribution for the details of which configuration items may be
listed. @option{--list-config} is only usable with
@option{--with-colons} set.
@item --gpgconf-list
@opindex gpgconf-list
This command is similar to @option{--list-config} but in general only
internally used by the @command{gpgconf} tool.
@item --gpgconf-test
@opindex gpgconf-test
This is more or less dummy action. However it parses the configuration
file and returns with failure if the configuration file would prevent
@command{gpg} from startup. Thus it may be used to run a syntax check
on the configuration file.
@end table
@c *******************************
@c ******* Deprecated ************
@c *******************************
@node Deprecated Options
@subsection Deprecated options
@table @gnupgtabopt
@ifset gpgone
@item --load-extension @code{name}
@opindex load-extension
Load an extension module. If @code{name} does not contain a slash it is
searched for in the directory configured when GnuPG was built
(generally "/usr/local/lib/gnupg"). Extensions are not generally
useful anymore, and the use of this option is deprecated.
@end ifset
@item --show-photos
@itemx --no-show-photos
@opindex show-photos
Causes @option{--list-keys}, @option{--list-sigs},
@option{--list-public-keys}, @option{--list-secret-keys}, and verifying
a signature to also display the photo ID attached to the key, if
any. See also @option{--photo-viewer}. These options are deprecated. Use
@option{--list-options [no-]show-photos} and/or @option{--verify-options
[no-]show-photos} instead.
@item --show-keyring
@opindex show-keyring
Display the keyring name at the head of key listings to show which
keyring a given key resides on. This option is deprecated: use
@option{--list-options [no-]show-keyring} instead.
@ifset gpgone
@item --ctapi-driver @code{file}
@opindex ctapi-driver
Use @code{file} to access the smartcard reader. The current default
is `libtowitoko.so'. Note that the use of this interface is
deprecated; it may be removed in future releases.
@end ifset
@item --always-trust
@opindex always-trust
Identical to @option{--trust-model always}. This option is deprecated.
@item --show-notation
@itemx --no-show-notation
@opindex show-notation
Show signature notations in the @option{--list-sigs} or @option{--check-sigs} listings
as well as when verifying a signature with a notation in it. These
options are deprecated. Use @option{--list-options [no-]show-notation}
and/or @option{--verify-options [no-]show-notation} instead.
@item --show-policy-url
@itemx --no-show-policy-url
@opindex show-policy-url
Show policy URLs in the @option{--list-sigs} or @option{--check-sigs}
listings as well as when verifying a signature with a policy URL in
it. These options are deprecated. Use @option{--list-options
[no-]show-policy-url} and/or @option{--verify-options
[no-]show-policy-url} instead.
@end table
@c *******************************************
@c *************** ****************
@c *************** FILES ****************
@c *************** ****************
@c *******************************************
@mansect files
@node GPG Configuration
@section Configuration files
There are a few configuration files to control certain aspects of
@command{@gpgname}'s operation. Unless noted, they are expected in the
current home directory (@pxref{option --homedir}).
@table @file
@item gpg.conf
@cindex gpg.conf
This is the standard configuration file read by @command{@gpgname} on
startup. It may contain any valid long option; the leading two dashes
may not be entered and the option may not be abbreviated. This default
name may be changed on the command line (@pxref{gpg-option --options}).
You should backup this file.
@end table
@c man:.RE
Note that on larger installations, it is useful to put predefined files
into the directory @file{/etc/skel/.gnupg/} so that newly created users
start up with a working configuration.
@ifclear gpgone
For existing users the a small
helper script is provided to create these files (@pxref{addgnupghome}).
@end ifclear
For internal purposes @command{@gpgname} creates and maintains a few other
files; They all live in in the current home directory (@pxref{option
--homedir}). Only the @command{@gpgname} may modify these files.
@table @file
@item ~/.gnupg/secring.gpg
The secret keyring. You should backup this file.
@item ~/.gnupg/secring.gpg.lock
The lock file for the secret keyring.
@item ~/.gnupg/pubring.gpg
The public keyring. You should backup this file.
@item ~/.gnupg/pubring.gpg.lock
The lock file for the public keyring.
@item ~/.gnupg/trustdb.gpg
The trust database. There is no need to backup this file; it is better
to backup the ownertrust values (@pxref{option --export-ownertrust}).
@item ~/.gnupg/trustdb.gpg.lock
The lock file for the trust database.
@item ~/.gnupg/random_seed
A file used to preserve the state of the internal random pool.
@item /usr[/local]/share/gnupg/options.skel
The skeleton options file.
@item /usr[/local]/lib/gnupg/
Default location for extensions.
@end table
@c man:.RE
Operation is further controlled by a few environment variables:
@table @asis
@item HOME
Used to locate the default home directory.
@item GNUPGHOME
If set directory used instead of "~/.gnupg".
@item GPG_AGENT_INFO
Used to locate the gpg-agent.
@ifset gpgone
This is only honored when @option{--use-agent} is set.
@end ifset
The value consists of 3 colon delimited fields: The first is the path
to the Unix Domain Socket, the second the PID of the gpg-agent and the
protocol version which should be set to 1. When starting the gpg-agent
as described in its documentation, this variable is set to the correct
value. The option @option{--gpg-agent-info} can be used to override it.
@item PINENTRY_USER_DATA
This value is passed via gpg-agent to pinentry. It is useful to convey
extra information to a custom pinentry.
@item COLUMNS
@itemx LINES
Used to size some displays to the full size of the screen.
@item LANGUAGE
Apart from its use by GNU, it is used in the W32 version to override the
language selection done through the Registry. If used and set to a
valid and available language name (@var{langid}), the file with the
translation is loaded from
@code{@var{gpgdir}/gnupg.nls/@var{langid}.mo}. Here @var{gpgdir} is the
directory out of which the gpg binary has been loaded. If it can't be
loaded the Registry is tried and as last resort the native Windows
locale system is used.
@end table
@c *******************************************
@c *************** ****************
@c *************** EXAMPLES ****************
@c *************** ****************
@c *******************************************
@mansect examples
@node GPG Examples
@section Examples
@table @asis
@item gpg -se -r @code{Bob} @code{file}
sign and encrypt for user Bob
@item gpg --clearsign @code{file}
make a clear text signature
@item gpg -sb @code{file}
make a detached signature
@item gpg -u 0x12345678 -sb @code{file}
make a detached signature with the key 0x12345678
@item gpg --list-keys @code{user_ID}
show keys
@item gpg --fingerprint @code{user_ID}
show fingerprint
@item gpg --verify @code{pgpfile}
@itemx gpg --verify @code{sigfile}
Verify the signature of the file but do not output the data. The
second form is used for detached signatures, where @code{sigfile}
is the detached signature (either ASCII armored or binary) and
are the signed data; if this is not given, the name of
the file holding the signed data is constructed by cutting off the
extension (".asc" or ".sig") of @code{sigfile} or by asking the
user for the filename.
@end table
@c *******************************************
@c *************** ****************
@c *************** USER ID ****************
@c *************** ****************
@c *******************************************
@mansect how to specify a user id
@ifset isman
@include specify-user-id.texi
@end ifset
@mansect return value
@chapheading RETURN VALUE
The program returns 0 if everything was fine, 1 if at least
a signature was bad, and other error codes for fatal errors.
@mansect warnings
@chapheading WARNINGS
Use a *good* password for your user account and a *good* passphrase
to protect your secret key. This passphrase is the weakest part of the
whole system. Programs to do dictionary attacks on your secret keyring
are very easy to write and so you should protect your "~/.gnupg/"
directory very well.
Keep in mind that, if this program is used over a network (telnet), it
is *very* easy to spy out your passphrase!
If you are going to verify detached signatures, make sure that the
program knows about it; either give both filenames on the command line
or use @samp{-} to specify STDIN.
@mansect interoperability
@chapheading INTEROPERABILITY WITH OTHER OPENPGP PROGRAMS
GnuPG tries to be a very flexible implementation of the OpenPGP
standard. In particular, GnuPG implements many of the optional parts
of the standard, such as the SHA-512 hash, and the ZLIB and BZIP2
compression algorithms. It is important to be aware that not all
OpenPGP programs implement these optional algorithms and that by
forcing their use via the @option{--cipher-algo},
@option{--digest-algo}, @option{--cert-digest-algo}, or
@option{--compress-algo} options in GnuPG, it is possible to create a
perfectly valid OpenPGP message, but one that cannot be read by the
intended recipient.
There are dozens of variations of OpenPGP programs available, and each
supports a slightly different subset of these optional algorithms.
For example, until recently, no (unhacked) version of PGP supported
the BLOWFISH cipher algorithm. A message using BLOWFISH simply could
not be read by a PGP user. By default, GnuPG uses the standard
OpenPGP preferences system that will always do the right thing and
create messages that are usable by all recipients, regardless of which
OpenPGP program they use. Only override this safe default if you
really know what you are doing.
If you absolutely must override the safe default, or if the preferences
on a given key are invalid for some reason, you are far better off using
the @option{--pgp6}, @option{--pgp7}, or @option{--pgp8} options. These
options are safe as they do not force any particular algorithms in
violation of OpenPGP, but rather reduce the available algorithms to a
"PGP-safe" list.
@mansect bugs
@chapheading BUGS
On older systems this program should be installed as setuid(root). This
is necessary to lock memory pages. Locking memory pages prevents the
operating system from writing memory pages (which may contain
passphrases or other sensitive material) to disk. If you get no
warning message about insecure memory your operating system supports
locking without being root. The program drops root privileges as soon
as locked memory is allocated.
Note also that some systems (especially laptops) have the ability to
``suspend to disk'' (also known as ``safe sleep'' or ``hibernate'').
This writes all memory to disk before going into a low power or even
powered off mode. Unless measures are taken in the operating system
to protect the saved memory, passphrases or other sensitive material
may be recoverable from it later.
Before you report a bug you should first search the mailing list
archives for similar problems and second check whether such a bug has
already been reported to our bug tracker at http://bugs.gnupg.org .
@c *******************************************
@c *************** **************
@c *************** UNATTENDED **************
@c *************** **************
@c *******************************************
@manpause
@node Unattended Usage of GPG
@section Unattended Usage
@command{gpg} is often used as a backend engine by other software. To help
with this a machine interface has been defined to have an unambiguous
way to do this. The options @option{--status-fd} and @option{--batch}
are almost always required for this.
@menu
* Unattended GPG key generation:: Unattended key generation
@end menu
@node Unattended GPG key generation
@subsection Unattended key generation
The command @option{--gen-key} may be used along with the option
@option{--batch} for unattended key generation. The parameters are
either read from stdin or given as a file on the command line.
The format of the parameter file is as follows:
@itemize @bullet
@item Text only, line length is limited to about 1000 characters.
@item UTF-8 encoding must be used to specify non-ASCII characters.
@item Empty lines are ignored.
@item Leading and trailing while space is ignored.
@item A hash sign as the first non white space character indicates
a comment line.
@item Control statements are indicated by a leading percent sign, the
arguments are separated by white space from the keyword.
@item Parameters are specified by a keyword, followed by a colon. Arguments
are separated by white space.
@item
The first parameter must be @samp{Key-Type}; control statements may be
placed anywhere.
@item
The order of the parameters does not matter except for @samp{Key-Type}
which must be the first parameter. The parameters are only used for
the generated keyblock (primary and subkeys); parameters from previous
sets are not used. Some syntactically checks may be performed.
@item
Key generation takes place when either the end of the parameter file
is reached, the next @samp{Key-Type} parameter is encountered or at the
control statement @samp{%commit} is encountered.
@end itemize
@noindent
Control statements:
@table @asis
@item %echo @var{text}
Print @var{text} as diagnostic.
@item %dry-run
Suppress actual key generation (useful for syntax checking).
@item %commit
Perform the key generation. Note that an implicit commit is done at
the next @asis{Key-Type} parameter.
@item %pubring @var{filename}
@itemx %secring @var{filename}
Do not write the key to the default or commandline given keyring but
to @var{filename}. This must be given before the first commit to take
place, duplicate specification of the same filename is ignored, the
last filename before a commit is used. The filename is used until a
new filename is used (at commit points) and all keys are written to
that file. If a new filename is given, this file is created (and
overwrites an existing one). For GnuPG versions prior to 2.1, both
control statements must be given. For GnuPG 2.1 and later
@samp{%secring} is a no-op.
@item %ask-passphrase
@itemx %no-ask-passphrase
Enable (or disable) a mode where the command @option{passphrase} is
ignored and instead the usual passphrase dialog is used. This does
not make sense for batch key generation; however the unattended key
generation feature is also used by GUIs and this feature relinquishes
the GUI from implementing its own passphrase entry code. These are
global control statements and affect all future key genrations.
@item %no-protection
Since GnuPG version 2.1 it is not anymore possible to specify a
passphrase for unattended key generation. The passphrase command is
simply ignored and @samp{%ask-passpharse} is thus implicitly enabled.
Using this option allows the creation of keys without any passphrase
protection. This option is mainly intended for regression tests.
@item %transient-key
If given the keys are created using a faster and a somewhat less
secure random number generator. This option may be used for keys
which are only used for a short time and do not require full
cryptographic strength. It takes only effect if used together with
the control statement @samp{%no-protection}.
@end table
@noindent
General Parameters:
@table @asis
@item Key-Type: @var{algo}
Starts a new parameter block by giving the type of the primary
key. The algorithm must be capable of signing. This is a required
parameter. @var{algo} may either be an OpenPGP algorithm number or a
string with the algorithm name. The special value @samp{default} may
be used for @var{algo} to create the default key type; in this case a
@samp{Key-Usage} shall not be given and @samp{default} also be used
for @samp{Subkey-Type}.
@item Key-Length: @var{nbits}
The requested length of the generated key in bits. The default is
returned by running the command @samp{gpg2 --gpgconf-list}.
@item Key-Grip: @var{hexstring}
This is optional and used to generate a CSR or certificate for an
already existing key. Key-Length will be ignored when given.
@item Key-Usage: @var{usage-list}
Space or comma delimited list of key usages. Allowed values are
@samp{encrypt}, @samp{sign}, and @samp{auth}. This is used to
generate the key flags. Please make sure that the algorithm is
capable of this usage. Note that OpenPGP requires that all primary
keys are capable of certification, so no matter what usage is given
here, the @samp{cert} flag will be on. If no @samp{Key-Usage} is
specified and the @samp{Key-Type} is not @samp{default}, all allowed
usages for that particular algorithm are used; if it is not given but
@samp{default} is used the usage will be @samp{sign}.
@item Subkey-Type: @var{algo}
This generates a secondary key (subkey). Currently only one subkey
can be handled. See also @samp{Key-Type} above.
@item Subkey-Length: @var{nbits}
Length of the secondary key (subkey) in bits. The default is returned
by running the command @samp{gpg2 --gpgconf-list}".
@item Subkey-Usage: @var{usage-list}
Key usage lists for a subkey; similar to @samp{Key-Usage}.
@item Passphrase: @var{string}
If you want to specify a passphrase for the secret key,
enter it here. Default is not to use any passphrase.
@item Name-Real: @var{name}
@itemx Name-Comment: @var{comment}
@itemx Name-Email: @var{email}
The three parts of a user name. Remember to use UTF-8 encoding here.
If you don't give any of them, no user ID is created.
@item Expire-Date: @var{iso-date}|(@var{number}[d|w|m|y])
Set the expiration date for the key (and the subkey). It may either
be entered in ISO date format (e.g. "20000815T145012") or as number of
days, weeks, month or years after the creation date. The special
notation "seconds=N" is also allowed to specify a number of seconds
since creation. Without a letter days are assumed. Note that there
is no check done on the overflow of the type used by OpenPGP for
timestamps. Thus you better make sure that the given value make
sense. Although OpenPGP works with time intervals, GnuPG uses an
absolute value internally and thus the last year we can represent is
2105.
@item Ceation-Date: @var{iso-date}
Set the creation date of the key as stored in the key information and
which is also part of the fingerprint calculation. Either a date like
"1986-04-26" or a full timestamp like "19860426T042640" may be used.
The time is considered to be UTC. The special notation "seconds=N"
may be used to directly specify a the number of seconds since Epoch
(Unix time). If it is not given the current time is used.
@item Preferences: @var{string}
Set the cipher, hash, and compression preference values for this key.
This expects the same type of string as the sub-command @samp{setpref}
in the @option{--edit-key} menu.
@item Revoker: @var{algo}:@var{fpr} [sensitive]
Add a designated revoker to the generated key. Algo is the public key
algorithm of the designated revoker (i.e. RSA=1, DSA=17, etc.)
@var{fpr} is the fingerprint of the designated revoker. The optional
@samp{sensitive} flag marks the designated revoker as sensitive
information. Only v4 keys may be designated revokers.
@item Keyserver: @var{string}
This is an optional parameter that specifies the preferred keyserver
URL for the key.
@item Handle: @var{string}
This is an optional parameter only used with the status lines
KEY_CREATED and KEY_NOT_CREATED. @var{string} may be up to 100
characters and should not contain spaces. It is useful for batch key
generation to associate a key parameter block with a status line.
@end table
@noindent
Here is an example on how to create a key:
@smallexample
$ cat >foo <<EOF
%echo Generating a basic OpenPGP key
Key-Type: DSA
Key-Length: 1024
Subkey-Type: ELG-E
Subkey-Length: 1024
Name-Real: Joe Tester
Name-Comment: with stupid passphrase
Name-Email: joe@@foo.bar
Expire-Date: 0
Passphrase: abc
%pubring foo.pub
%secring foo.sec
# Do a commit here, so that we can later print "done" :-)
%commit
%echo done
EOF
$ gpg2 --batch --gen-key foo
[...]
$ gpg2 --no-default-keyring --secret-keyring ./foo.sec \
--keyring ./foo.pub --list-secret-keys
/home/wk/work/gnupg-stable/scratch/foo.sec
------------------------------------------
sec 1024D/915A878D 2000-03-09 Joe Tester (with stupid passphrase) <joe@@foo.bar>
ssb 1024g/8F70E2C0 2000-03-09
@end smallexample
@noindent
If you want to create a key with the default algorithms you would use
these parameters:
@smallexample
%echo Generating a default key
Key-Type: default
Subkey-Type: default
Name-Real: Joe Tester
Name-Comment: with stupid passphrase
Name-Email: joe@@foo.bar
Expire-Date: 0
Passphrase: abc
%pubring foo.pub
%secring foo.sec
# Do a commit here, so that we can later print "done" :-)
%commit
%echo done
@end smallexample
@mansect see also
@ifset isman
@command{gpgv}(1),
@ifclear gpgone
@command{gpgsm}(1),
@command{gpg-agent}(1)
@end ifclear
@end ifset
@include see-also-note.texi
diff --git a/g10/gpg.c b/g10/gpg.c
index 7529e81cb..daae3d3ca 100644
--- a/g10/gpg.c
+++ b/g10/gpg.c
@@ -1,4534 +1,4559 @@
/* gpg.c - The GnuPG utility (main for gpg)
* Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
* 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+ * Copyright (C) 2013, 2014 Werner Koch
*
* This file is part of GnuPG.
*
* GnuPG is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* GnuPG is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include <config.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
#include <unistd.h>
#include <assert.h>
#ifdef HAVE_STAT
#include <sys/stat.h> /* for stat() */
#endif
#include <fcntl.h>
#ifdef HAVE_W32_SYSTEM
# ifdef HAVE_WINSOCK2_H
# include <winsock2.h>
# endif
# include <windows.h>
#endif
#define INCLUDED_BY_MAIN_MODULE 1
#include "gpg.h"
#include <assuan.h>
#include "../common/iobuf.h"
#include "util.h"
#include "packet.h"
#include "membuf.h"
#include "main.h"
#include "options.h"
#include "keydb.h"
#include "trustdb.h"
#include "filter.h"
#include "ttyio.h"
#include "i18n.h"
#include "sysutils.h"
#include "status.h"
#include "keyserver-internal.h"
#include "exec.h"
#include "gc-opt-flags.h"
#include "asshelp.h"
#include "call-dirmngr.h"
#include "../common/init.h"
#include "../common/shareddefs.h"
#if defined(HAVE_DOSISH_SYSTEM) || defined(__CYGWIN__)
#define MY_O_BINARY O_BINARY
#ifndef S_IRGRP
# define S_IRGRP 0
# define S_IWGRP 0
#endif
#else
#define MY_O_BINARY 0
#endif
enum cmd_and_opt_values
{
aNull = 0,
oArmor = 'a',
aDetachedSign = 'b',
aSym = 'c',
aDecrypt = 'd',
aEncr = 'e',
oInteractive = 'i',
aListKeys = 'k',
oDryRun = 'n',
oOutput = 'o',
oQuiet = 'q',
oRecipient = 'r',
oHiddenRecipient = 'R',
aSign = 's',
oTextmodeShort= 't',
oLocalUser = 'u',
oVerbose = 'v',
oCompress = 'z',
oSetNotation = 'N',
aListSecretKeys = 'K',
oBatch = 500,
oMaxOutput,
oSigNotation,
oCertNotation,
oShowNotation,
oNoShowNotation,
aEncrFiles,
aEncrSym,
aDecryptFiles,
aClearsign,
aStore,
aKeygen,
aSignEncr,
aSignEncrSym,
aSignSym,
aSignKey,
aLSignKey,
+ aQuickSignKey,
+ aQuickLSignKey,
aListConfig,
aGPGConfList,
aGPGConfTest,
aListPackets,
aEditKey,
aDeleteKeys,
aDeleteSecretKeys,
aDeleteSecretAndPublicKeys,
aImport,
aFastImport,
aVerify,
aVerifyFiles,
aListSigs,
aSendKeys,
aRecvKeys,
aLocateKeys,
aSearchKeys,
aRefreshKeys,
aFetchKeys,
aExport,
aExportSecret,
aExportSecretSub,
aCheckKeys,
aGenRevoke,
aDesigRevoke,
aPrimegen,
aPrintMD,
aPrintMDs,
aCheckTrustDB,
aUpdateTrustDB,
aFixTrustDB,
aListTrustDB,
aListTrustPath,
aExportOwnerTrust,
aImportOwnerTrust,
aDeArmor,
aEnArmor,
aGenRandom,
aRebuildKeydbCaches,
aCardStatus,
aCardEdit,
aChangePIN,
aPasswd,
aServer,
oTextmode,
oNoTextmode,
oExpert,
oNoExpert,
oDefSigExpire,
oAskSigExpire,
oNoAskSigExpire,
oDefCertExpire,
oAskCertExpire,
oNoAskCertExpire,
oDefCertLevel,
oMinCertLevel,
oAskCertLevel,
oNoAskCertLevel,
oFingerprint,
oWithFingerprint,
oWithKeygrip,
oAnswerYes,
oAnswerNo,
oKeyring,
oPrimaryKeyring,
oSecretKeyring,
oShowKeyring,
oDefaultKey,
oDefRecipient,
oDefRecipientSelf,
oNoDefRecipient,
oTrySecretKey,
oOptions,
oDebug,
oDebugLevel,
oDebugAll,
oDebugCCIDDriver,
oStatusFD,
oStatusFile,
oAttributeFD,
oAttributeFile,
oEmitVersion,
oNoEmitVersion,
oCompletesNeeded,
oMarginalsNeeded,
oMaxCertDepth,
oLoadExtension,
oGnuPG,
oRFC1991,
oRFC2440,
oRFC4880,
oOpenPGP,
oPGP2,
oPGP6,
oPGP7,
oPGP8,
oRFC2440Text,
oNoRFC2440Text,
oCipherAlgo,
oDigestAlgo,
oCertDigestAlgo,
oCompressAlgo,
oCompressLevel,
oBZ2CompressLevel,
oBZ2DecompressLowmem,
oPassphrase,
oPassphraseFD,
oPassphraseFile,
oPassphraseRepeat,
oPinentryMode,
oCommandFD,
oCommandFile,
oQuickRandom,
oNoVerbose,
oTrustDBName,
oNoSecmemWarn,
oRequireSecmem,
oNoRequireSecmem,
oNoPermissionWarn,
oNoMDCWarn,
oNoArmor,
oNoDefKeyring,
oNoGreeting,
oNoTTY,
oNoOptions,
oNoBatch,
oHomedir,
oWithColons,
oWithKeyData,
oWithSigList,
oWithSigCheck,
oSkipVerify,
oSkipHiddenRecipients,
oNoSkipHiddenRecipients,
oCompressKeys,
oCompressSigs,
oAlwaysTrust,
oTrustModel,
oForceOwnertrust,
oSetFilename,
oForYourEyesOnly,
oNoForYourEyesOnly,
oSetPolicyURL,
oSigPolicyURL,
oCertPolicyURL,
oShowPolicyURL,
oNoShowPolicyURL,
oSigKeyserverURL,
oUseEmbeddedFilename,
oNoUseEmbeddedFilename,
oComment,
oDefaultComment,
oNoComments,
oThrowKeyids,
oNoThrowKeyids,
oShowPhotos,
oNoShowPhotos,
oPhotoViewer,
oForceV3Sigs,
oNoForceV3Sigs,
oForceV4Certs,
oNoForceV4Certs,
oForceMDC,
oNoForceMDC,
oDisableMDC,
oNoDisableMDC,
oS2KMode,
oS2KDigest,
oS2KCipher,
oS2KCount,
oDisplayCharset,
oNotDashEscaped,
oEscapeFrom,
oNoEscapeFrom,
oLockOnce,
oLockMultiple,
oLockNever,
oKeyServer,
oKeyServerOptions,
oImportOptions,
oExportOptions,
oListOptions,
oVerifyOptions,
oTempDir,
oExecPath,
oEncryptTo,
oHiddenEncryptTo,
oNoEncryptTo,
oLoggerFD,
oLoggerFile,
oUtf8Strings,
oNoUtf8Strings,
oDisableCipherAlgo,
oDisablePubkeyAlgo,
oAllowNonSelfsignedUID,
oNoAllowNonSelfsignedUID,
oAllowFreeformUID,
oNoAllowFreeformUID,
oAllowSecretKeyImport,
oEnableSpecialFilenames,
oNoLiteral,
oSetFilesize,
oHonorHttpProxy,
oFastListMode,
oListOnly,
oIgnoreTimeConflict,
oIgnoreValidFrom,
oIgnoreCrcError,
oIgnoreMDCError,
oShowSessionKey,
oOverrideSessionKey,
oNoRandomSeedFile,
oAutoKeyRetrieve,
oNoAutoKeyRetrieve,
oUseAgent,
oNoUseAgent,
oGpgAgentInfo,
oMergeOnly,
oTryAllSecrets,
oTrustedKey,
oNoExpensiveTrustChecks,
oFixedListMode,
oLegacyListMode,
oNoSigCache,
oNoSigCreateCheck,
oAutoCheckTrustDB,
oNoAutoCheckTrustDB,
oPreservePermissions,
oDefaultPreferenceList,
oDefaultKeyserverURL,
oPersonalCipherPreferences,
oPersonalDigestPreferences,
oPersonalCompressPreferences,
oAgentProgram,
oDirmngrProgram,
oDisplay,
oTTYname,
oTTYtype,
oLCctype,
oLCmessages,
oXauthority,
oGroup,
oUnGroup,
oNoGroups,
oStrict,
oNoStrict,
oMangleDosFilenames,
oNoMangleDosFilenames,
oEnableProgressFilter,
oMultifile,
oKeyidFormat,
oExitOnStatusWriteError,
oLimitCardInsertTries,
oRequireCrossCert,
oNoRequireCrossCert,
oAutoKeyLocate,
oNoAutoKeyLocate,
oAllowMultisigVerification,
oEnableDSA2,
oDisableDSA2,
oAllowMultipleMessages,
oNoAllowMultipleMessages,
oAllowWeakDigestAlgos,
oFakedSystemTime,
oNoop
};
static ARGPARSE_OPTS opts[] = {
ARGPARSE_group (300, N_("@Commands:\n ")),
ARGPARSE_c (aSign, "sign", N_("make a signature")),
ARGPARSE_c (aClearsign, "clearsign", N_("make a clear text signature")),
ARGPARSE_c (aDetachedSign, "detach-sign", N_("make a detached signature")),
ARGPARSE_c (aEncr, "encrypt", N_("encrypt data")),
ARGPARSE_c (aEncrFiles, "encrypt-files", "@"),
ARGPARSE_c (aSym, "symmetric", N_("encryption only with symmetric cipher")),
ARGPARSE_c (aStore, "store", "@"),
ARGPARSE_c (aDecrypt, "decrypt", N_("decrypt data (default)")),
ARGPARSE_c (aDecryptFiles, "decrypt-files", "@"),
ARGPARSE_c (aVerify, "verify" , N_("verify a signature")),
ARGPARSE_c (aVerifyFiles, "verify-files" , "@" ),
ARGPARSE_c (aListKeys, "list-keys", N_("list keys")),
ARGPARSE_c (aListKeys, "list-public-keys", "@" ),
ARGPARSE_c (aListSigs, "list-sigs", N_("list keys and signatures")),
ARGPARSE_c (aCheckKeys, "check-sigs",N_("list and check key signatures")),
ARGPARSE_c (oFingerprint, "fingerprint", N_("list keys and fingerprints")),
ARGPARSE_c (aListSecretKeys, "list-secret-keys", N_("list secret keys")),
ARGPARSE_c (aKeygen, "gen-key", N_("generate a new key pair")),
ARGPARSE_c (aGenRevoke, "gen-revoke",N_("generate a revocation certificate")),
ARGPARSE_c (aDeleteKeys,"delete-keys",
N_("remove keys from the public keyring")),
ARGPARSE_c (aDeleteSecretKeys, "delete-secret-keys",
N_("remove keys from the secret keyring")),
+ ARGPARSE_c (aQuickSignKey, "quick-sign-key" ,
+ N_("quickly sign a key")),
+ ARGPARSE_c (aQuickLSignKey, "quick-lsign-key",
+ N_("quickly sign a key locally")),
ARGPARSE_c (aSignKey, "sign-key" ,N_("sign a key")),
ARGPARSE_c (aLSignKey, "lsign-key" ,N_("sign a key locally")),
ARGPARSE_c (aEditKey, "edit-key" ,N_("sign or edit a key")),
ARGPARSE_c (aEditKey, "key-edit" ,"@"),
ARGPARSE_c (aPasswd, "passwd", N_("change a passphrase")),
ARGPARSE_c (aDesigRevoke, "desig-revoke","@" ),
ARGPARSE_c (aExport, "export" , N_("export keys") ),
ARGPARSE_c (aSendKeys, "send-keys" , N_("export keys to a key server") ),
ARGPARSE_c (aRecvKeys, "recv-keys" , N_("import keys from a key server") ),
ARGPARSE_c (aSearchKeys, "search-keys" ,
N_("search for keys on a key server") ),
ARGPARSE_c (aRefreshKeys, "refresh-keys",
N_("update all keys from a keyserver")),
ARGPARSE_c (aLocateKeys, "locate-keys", "@"),
ARGPARSE_c (aFetchKeys, "fetch-keys" , "@" ),
ARGPARSE_c (aExportSecret, "export-secret-keys" , "@" ),
ARGPARSE_c (aExportSecretSub, "export-secret-subkeys" , "@" ),
ARGPARSE_c (aImport, "import", N_("import/merge keys")),
ARGPARSE_c (aFastImport, "fast-import", "@"),
#ifdef ENABLE_CARD_SUPPORT
ARGPARSE_c (aCardStatus, "card-status", N_("print the card status")),
ARGPARSE_c (aCardEdit, "card-edit", N_("change data on a card")),
ARGPARSE_c (aChangePIN, "change-pin", N_("change a card's PIN")),
#endif
ARGPARSE_c (aListConfig, "list-config", "@"),
ARGPARSE_c (aGPGConfList, "gpgconf-list", "@" ),
ARGPARSE_c (aGPGConfTest, "gpgconf-test", "@" ),
ARGPARSE_c (aListPackets, "list-packets","@"),
#ifndef NO_TRUST_MODELS
ARGPARSE_c (aExportOwnerTrust, "export-ownertrust", "@"),
ARGPARSE_c (aImportOwnerTrust, "import-ownertrust", "@"),
ARGPARSE_c (aUpdateTrustDB,"update-trustdb",
N_("update the trust database")),
ARGPARSE_c (aCheckTrustDB, "check-trustdb", "@"),
ARGPARSE_c (aFixTrustDB, "fix-trustdb", "@"),
#endif
ARGPARSE_c (aDeArmor, "dearmor", "@"),
ARGPARSE_c (aDeArmor, "dearmour", "@"),
ARGPARSE_c (aEnArmor, "enarmor", "@"),
ARGPARSE_c (aEnArmor, "enarmour", "@"),
ARGPARSE_c (aPrintMD, "print-md", N_("print message digests")),
ARGPARSE_c (aPrimegen, "gen-prime", "@" ),
ARGPARSE_c (aGenRandom,"gen-random", "@" ),
ARGPARSE_c (aServer, "server", N_("run in server mode")),
ARGPARSE_group (301, N_("@\nOptions:\n ")),
ARGPARSE_s_n (oArmor, "armor", N_("create ascii armored output")),
ARGPARSE_s_n (oArmor, "armour", "@"),
ARGPARSE_s_s (oRecipient, "recipient", N_("|USER-ID|encrypt for USER-ID")),
ARGPARSE_s_s (oHiddenRecipient, "hidden-recipient", "@"),
ARGPARSE_s_s (oRecipient, "remote-user", "@"), /* (old option name) */
ARGPARSE_s_s (oDefRecipient, "default-recipient", "@"),
ARGPARSE_s_n (oDefRecipientSelf, "default-recipient-self", "@"),
ARGPARSE_s_n (oNoDefRecipient, "no-default-recipient", "@"),
ARGPARSE_s_s (oTempDir, "temp-directory", "@"),
ARGPARSE_s_s (oExecPath, "exec-path", "@"),
ARGPARSE_s_s (oEncryptTo, "encrypt-to", "@"),
ARGPARSE_s_n (oNoEncryptTo, "no-encrypt-to", "@"),
ARGPARSE_s_s (oHiddenEncryptTo, "hidden-encrypt-to", "@"),
ARGPARSE_s_s (oLocalUser, "local-user",
N_("|USER-ID|use USER-ID to sign or decrypt")),
ARGPARSE_s_s (oTrySecretKey, "try-secret-key", "@"),
ARGPARSE_s_i (oCompress, NULL,
N_("|N|set compress level to N (0 disables)")),
ARGPARSE_s_i (oCompressLevel, "compress-level", "@"),
ARGPARSE_s_i (oBZ2CompressLevel, "bzip2-compress-level", "@"),
ARGPARSE_s_n (oBZ2DecompressLowmem, "bzip2-decompress-lowmem", "@"),
ARGPARSE_s_n (oTextmodeShort, NULL, "@"),
ARGPARSE_s_n (oTextmode, "textmode", N_("use canonical text mode")),
ARGPARSE_s_n (oNoTextmode, "no-textmode", "@"),
ARGPARSE_s_n (oExpert, "expert", "@"),
ARGPARSE_s_n (oNoExpert, "no-expert", "@"),
ARGPARSE_s_s (oDefSigExpire, "default-sig-expire", "@"),
ARGPARSE_s_n (oAskSigExpire, "ask-sig-expire", "@"),
ARGPARSE_s_n (oNoAskSigExpire, "no-ask-sig-expire", "@"),
ARGPARSE_s_s (oDefCertExpire, "default-cert-expire", "@"),
ARGPARSE_s_n (oAskCertExpire, "ask-cert-expire", "@"),
ARGPARSE_s_n (oNoAskCertExpire, "no-ask-cert-expire", "@"),
ARGPARSE_s_i (oDefCertLevel, "default-cert-level", "@"),
ARGPARSE_s_i (oMinCertLevel, "min-cert-level", "@"),
ARGPARSE_s_n (oAskCertLevel, "ask-cert-level", "@"),
ARGPARSE_s_n (oNoAskCertLevel, "no-ask-cert-level", "@"),
ARGPARSE_s_s (oOutput, "output", N_("|FILE|write output to FILE")),
ARGPARSE_p_u (oMaxOutput, "max-output", "@"),
ARGPARSE_s_n (oVerbose, "verbose", N_("verbose")),
ARGPARSE_s_n (oQuiet, "quiet", "@"),
ARGPARSE_s_n (oNoTTY, "no-tty", "@"),
ARGPARSE_s_n (oForceV3Sigs, "force-v3-sigs", "@"),
ARGPARSE_s_n (oNoForceV3Sigs, "no-force-v3-sigs", "@"),
ARGPARSE_s_n (oForceV4Certs, "force-v4-certs", "@"),
ARGPARSE_s_n (oNoForceV4Certs, "no-force-v4-certs", "@"),
ARGPARSE_s_n (oForceMDC, "force-mdc", "@"),
ARGPARSE_s_n (oNoForceMDC, "no-force-mdc", "@"),
ARGPARSE_s_n (oDisableMDC, "disable-mdc", "@"),
ARGPARSE_s_n (oNoDisableMDC, "no-disable-mdc", "@"),
ARGPARSE_s_n (oDryRun, "dry-run", N_("do not make any changes")),
ARGPARSE_s_n (oInteractive, "interactive", N_("prompt before overwriting")),
ARGPARSE_s_n (oUseAgent, "use-agent", "@"),
ARGPARSE_s_n (oNoUseAgent, "no-use-agent", "@"),
ARGPARSE_s_s (oGpgAgentInfo, "gpg-agent-info", "@"),
ARGPARSE_s_n (oBatch, "batch", "@"),
ARGPARSE_s_n (oAnswerYes, "yes", "@"),
ARGPARSE_s_n (oAnswerNo, "no", "@"),
ARGPARSE_s_s (oKeyring, "keyring", "@"),
ARGPARSE_s_s (oPrimaryKeyring, "primary-keyring", "@"),
ARGPARSE_s_s (oSecretKeyring, "secret-keyring", "@"),
ARGPARSE_s_n (oShowKeyring, "show-keyring", "@"),
ARGPARSE_s_s (oDefaultKey, "default-key", "@"),
ARGPARSE_s_s (oKeyServer, "keyserver", "@"),
ARGPARSE_s_s (oKeyServerOptions, "keyserver-options", "@"),
ARGPARSE_s_s (oImportOptions, "import-options", "@"),
ARGPARSE_s_s (oExportOptions, "export-options", "@"),
ARGPARSE_s_s (oListOptions, "list-options", "@"),
ARGPARSE_s_s (oVerifyOptions, "verify-options", "@"),
ARGPARSE_s_s (oDisplayCharset, "display-charset", "@"),
ARGPARSE_s_s (oDisplayCharset, "charset", "@"),
ARGPARSE_s_s (oOptions, "options", "@"),
ARGPARSE_p_u (oDebug, "debug", "@"),
ARGPARSE_s_s (oDebugLevel, "debug-level", "@"),
ARGPARSE_s_n (oDebugAll, "debug-all", "@"),
ARGPARSE_s_i (oStatusFD, "status-fd", "@"),
ARGPARSE_s_s (oStatusFile, "status-file", "@"),
ARGPARSE_s_i (oAttributeFD, "attribute-fd", "@"),
ARGPARSE_s_s (oAttributeFile, "attribute-file", "@"),
ARGPARSE_s_n (oNoop, "sk-comments", "@"),
ARGPARSE_s_n (oNoop, "no-sk-comments", "@"),
ARGPARSE_s_i (oCompletesNeeded, "completes-needed", "@"),
ARGPARSE_s_i (oMarginalsNeeded, "marginals-needed", "@"),
ARGPARSE_s_i (oMaxCertDepth, "max-cert-depth", "@" ),
ARGPARSE_s_s (oTrustedKey, "trusted-key", "@"),
ARGPARSE_s_s (oLoadExtension, "load-extension", "@"), /* Dummy. */
ARGPARSE_s_n (oGnuPG, "gnupg", "@"),
ARGPARSE_s_n (oGnuPG, "no-pgp2", "@"),
ARGPARSE_s_n (oGnuPG, "no-pgp6", "@"),
ARGPARSE_s_n (oGnuPG, "no-pgp7", "@"),
ARGPARSE_s_n (oGnuPG, "no-pgp8", "@"),
ARGPARSE_s_n (oRFC1991, "rfc1991", "@"),
ARGPARSE_s_n (oRFC2440, "rfc2440", "@"),
ARGPARSE_s_n (oRFC4880, "rfc4880", "@"),
ARGPARSE_s_n (oOpenPGP, "openpgp", N_("use strict OpenPGP behavior")),
ARGPARSE_s_n (oPGP2, "pgp2", "@"),
ARGPARSE_s_n (oPGP6, "pgp6", "@"),
ARGPARSE_s_n (oPGP7, "pgp7", "@"),
ARGPARSE_s_n (oPGP8, "pgp8", "@"),
ARGPARSE_s_n (oRFC2440Text, "rfc2440-text", "@"),
ARGPARSE_s_n (oNoRFC2440Text, "no-rfc2440-text", "@"),
ARGPARSE_s_i (oS2KMode, "s2k-mode", "@"),
ARGPARSE_s_s (oS2KDigest, "s2k-digest-algo", "@"),
ARGPARSE_s_s (oS2KCipher, "s2k-cipher-algo", "@"),
ARGPARSE_s_i (oS2KCount, "s2k-count", "@"),
ARGPARSE_s_s (oCipherAlgo, "cipher-algo", "@"),
ARGPARSE_s_s (oDigestAlgo, "digest-algo", "@"),
ARGPARSE_s_s (oCertDigestAlgo, "cert-digest-algo", "@"),
ARGPARSE_s_s (oCompressAlgo,"compress-algo", "@"),
ARGPARSE_s_s (oCompressAlgo, "compression-algo", "@"), /* Alias */
ARGPARSE_s_n (oThrowKeyids, "throw-keyid", "@"),
ARGPARSE_s_n (oThrowKeyids, "throw-keyids", "@"),
ARGPARSE_s_n (oNoThrowKeyids, "no-throw-keyid", "@"),
ARGPARSE_s_n (oNoThrowKeyids, "no-throw-keyids", "@"),
ARGPARSE_s_n (oShowPhotos, "show-photos", "@"),
ARGPARSE_s_n (oNoShowPhotos, "no-show-photos", "@"),
ARGPARSE_s_s (oPhotoViewer, "photo-viewer", "@"),
ARGPARSE_s_s (oSetNotation, "set-notation", "@"),
ARGPARSE_s_s (oSetNotation, "notation-data", "@"), /* Alias */
ARGPARSE_s_s (oSigNotation, "sig-notation", "@"),
ARGPARSE_s_s (oCertNotation, "cert-notation", "@"),
ARGPARSE_group (302, N_(
"@\n(See the man page for a complete listing of all commands and options)\n"
)),
ARGPARSE_group (303, N_("@\nExamples:\n\n"
" -se -r Bob [file] sign and encrypt for user Bob\n"
" --clearsign [file] make a clear text signature\n"
" --detach-sign [file] make a detached signature\n"
" --list-keys [names] show keys\n"
" --fingerprint [names] show fingerprints\n")),
/* More hidden commands and options. */
ARGPARSE_c (aPrintMDs, "print-mds", "@"), /* old */
#ifndef NO_TRUST_MODELS
ARGPARSE_c (aListTrustDB, "list-trustdb", "@"),
#endif
/* Not yet used:
ARGPARSE_c (aListTrustPath, "list-trust-path", "@"), */
ARGPARSE_c (aDeleteSecretAndPublicKeys,
"delete-secret-and-public-keys", "@"),
ARGPARSE_c (aRebuildKeydbCaches, "rebuild-keydb-caches", "@"),
ARGPARSE_s_s (oPassphrase, "passphrase", "@"),
ARGPARSE_s_i (oPassphraseFD, "passphrase-fd", "@"),
ARGPARSE_s_s (oPassphraseFile, "passphrase-file", "@"),
ARGPARSE_s_i (oPassphraseRepeat,"passphrase-repeat", "@"),
ARGPARSE_s_s (oPinentryMode, "pinentry-mode", "@"),
ARGPARSE_s_i (oCommandFD, "command-fd", "@"),
ARGPARSE_s_s (oCommandFile, "command-file", "@"),
ARGPARSE_s_n (oQuickRandom, "debug-quick-random", "@"),
ARGPARSE_s_n (oNoVerbose, "no-verbose", "@"),
#ifndef NO_TRUST_MODELS
ARGPARSE_s_s (oTrustDBName, "trustdb-name", "@"),
ARGPARSE_s_n (oAutoCheckTrustDB, "auto-check-trustdb", "@"),
ARGPARSE_s_n (oNoAutoCheckTrustDB, "no-auto-check-trustdb", "@"),
ARGPARSE_s_s (oForceOwnertrust, "force-ownertrust", "@"),
#endif
ARGPARSE_s_n (oNoSecmemWarn, "no-secmem-warning", "@"),
ARGPARSE_s_n (oRequireSecmem, "require-secmem", "@"),
ARGPARSE_s_n (oNoRequireSecmem, "no-require-secmem", "@"),
ARGPARSE_s_n (oNoPermissionWarn, "no-permission-warning", "@"),
ARGPARSE_s_n (oNoMDCWarn, "no-mdc-warning", "@"),
ARGPARSE_s_n (oNoArmor, "no-armor", "@"),
ARGPARSE_s_n (oNoArmor, "no-armour", "@"),
ARGPARSE_s_n (oNoDefKeyring, "no-default-keyring", "@"),
ARGPARSE_s_n (oNoGreeting, "no-greeting", "@"),
ARGPARSE_s_n (oNoOptions, "no-options", "@"),
ARGPARSE_s_s (oHomedir, "homedir", "@"),
ARGPARSE_s_n (oNoBatch, "no-batch", "@"),
ARGPARSE_s_n (oWithColons, "with-colons", "@"),
ARGPARSE_s_n (oWithKeyData,"with-key-data", "@"),
ARGPARSE_s_n (oWithSigList,"with-sig-list", "@"),
ARGPARSE_s_n (oWithSigCheck,"with-sig-check", "@"),
ARGPARSE_s_n (aListKeys, "list-key", "@"), /* alias */
ARGPARSE_s_n (aListSigs, "list-sig", "@"), /* alias */
ARGPARSE_s_n (aCheckKeys, "check-sig", "@"), /* alias */
ARGPARSE_s_n (oSkipVerify, "skip-verify", "@"),
ARGPARSE_s_n (oSkipHiddenRecipients, "skip-hidden-recipients", "@"),
ARGPARSE_s_n (oNoSkipHiddenRecipients, "no-skip-hidden-recipients", "@"),
ARGPARSE_s_n (oCompressKeys, "compress-keys", "@"),
ARGPARSE_s_n (oCompressSigs, "compress-sigs", "@"),
ARGPARSE_s_i (oDefCertLevel, "default-cert-check-level", "@"), /* old */
ARGPARSE_s_n (oAlwaysTrust, "always-trust", "@"),
ARGPARSE_s_s (oTrustModel, "trust-model", "@"),
ARGPARSE_s_s (oSetFilename, "set-filename", "@"),
ARGPARSE_s_n (oForYourEyesOnly, "for-your-eyes-only", "@"),
ARGPARSE_s_n (oNoForYourEyesOnly, "no-for-your-eyes-only", "@"),
ARGPARSE_s_s (oSetPolicyURL, "set-policy-url", "@"),
ARGPARSE_s_s (oSigPolicyURL, "sig-policy-url", "@"),
ARGPARSE_s_s (oCertPolicyURL, "cert-policy-url", "@"),
ARGPARSE_s_n (oShowPolicyURL, "show-policy-url", "@"),
ARGPARSE_s_n (oNoShowPolicyURL, "no-show-policy-url", "@"),
ARGPARSE_s_s (oSigKeyserverURL, "sig-keyserver-url", "@"),
ARGPARSE_s_n (oShowNotation, "show-notation", "@"),
ARGPARSE_s_n (oNoShowNotation, "no-show-notation", "@"),
ARGPARSE_s_s (oComment, "comment", "@"),
ARGPARSE_s_n (oDefaultComment, "default-comment", "@"),
ARGPARSE_s_n (oNoComments, "no-comments", "@"),
ARGPARSE_s_n (oEmitVersion, "emit-version", "@"),
ARGPARSE_s_n (oNoEmitVersion, "no-emit-version", "@"),
ARGPARSE_s_n (oNoEmitVersion, "no-version", "@"), /* alias */
ARGPARSE_s_n (oNotDashEscaped, "not-dash-escaped", "@"),
ARGPARSE_s_n (oEscapeFrom, "escape-from-lines", "@"),
ARGPARSE_s_n (oNoEscapeFrom, "no-escape-from-lines", "@"),
ARGPARSE_s_n (oLockOnce, "lock-once", "@"),
ARGPARSE_s_n (oLockMultiple, "lock-multiple", "@"),
ARGPARSE_s_n (oLockNever, "lock-never", "@"),
ARGPARSE_s_i (oLoggerFD, "logger-fd", "@"),
ARGPARSE_s_s (oLoggerFile, "log-file", "@"),
ARGPARSE_s_s (oLoggerFile, "logger-file", "@"), /* 1.4 compatibility. */
ARGPARSE_s_n (oUseEmbeddedFilename, "use-embedded-filename", "@"),
ARGPARSE_s_n (oNoUseEmbeddedFilename, "no-use-embedded-filename", "@"),
ARGPARSE_s_n (oUtf8Strings, "utf8-strings", "@"),
ARGPARSE_s_n (oNoUtf8Strings, "no-utf8-strings", "@"),
ARGPARSE_s_n (oWithFingerprint, "with-fingerprint", "@"),
ARGPARSE_s_n (oWithKeygrip, "with-keygrip", "@"),
ARGPARSE_s_s (oDisableCipherAlgo, "disable-cipher-algo", "@"),
ARGPARSE_s_s (oDisablePubkeyAlgo, "disable-pubkey-algo", "@"),
ARGPARSE_s_n (oAllowNonSelfsignedUID, "allow-non-selfsigned-uid", "@"),
ARGPARSE_s_n (oNoAllowNonSelfsignedUID, "no-allow-non-selfsigned-uid", "@"),
ARGPARSE_s_n (oAllowFreeformUID, "allow-freeform-uid", "@"),
ARGPARSE_s_n (oNoAllowFreeformUID, "no-allow-freeform-uid", "@"),
ARGPARSE_s_n (oNoLiteral, "no-literal", "@"),
ARGPARSE_p_u (oSetFilesize, "set-filesize", "@"),
ARGPARSE_s_n (oHonorHttpProxy, "honor-http-proxy", "@"),
ARGPARSE_s_n (oFastListMode, "fast-list-mode", "@"),
ARGPARSE_s_n (oFixedListMode, "fixed-list-mode", "@"),
ARGPARSE_s_n (oLegacyListMode, "legacy-list-mode", "@"),
ARGPARSE_s_n (oListOnly, "list-only", "@"),
ARGPARSE_s_n (oIgnoreTimeConflict, "ignore-time-conflict", "@"),
ARGPARSE_s_n (oIgnoreValidFrom, "ignore-valid-from", "@"),
ARGPARSE_s_n (oIgnoreCrcError, "ignore-crc-error", "@"),
ARGPARSE_s_n (oIgnoreMDCError, "ignore-mdc-error", "@"),
ARGPARSE_s_n (oShowSessionKey, "show-session-key", "@"),
ARGPARSE_s_s (oOverrideSessionKey, "override-session-key", "@"),
ARGPARSE_s_n (oNoRandomSeedFile, "no-random-seed-file", "@"),
ARGPARSE_s_n (oAutoKeyRetrieve, "auto-key-retrieve", "@"),
ARGPARSE_s_n (oNoAutoKeyRetrieve, "no-auto-key-retrieve", "@"),
ARGPARSE_s_n (oNoSigCache, "no-sig-cache", "@"),
ARGPARSE_s_n (oNoSigCreateCheck, "no-sig-create-check", "@"),
ARGPARSE_s_n (oMergeOnly, "merge-only", "@" ),
ARGPARSE_s_n (oAllowSecretKeyImport, "allow-secret-key-import", "@"),
ARGPARSE_s_n (oTryAllSecrets, "try-all-secrets", "@"),
ARGPARSE_s_n (oEnableSpecialFilenames, "enable-special-filenames", "@"),
ARGPARSE_s_n (oNoExpensiveTrustChecks, "no-expensive-trust-checks", "@"),
ARGPARSE_s_n (oPreservePermissions, "preserve-permissions", "@"),
ARGPARSE_s_s (oDefaultPreferenceList, "default-preference-list", "@"),
ARGPARSE_s_s (oDefaultKeyserverURL, "default-keyserver-url", "@"),
ARGPARSE_s_s (oPersonalCipherPreferences, "personal-cipher-preferences","@"),
ARGPARSE_s_s (oPersonalDigestPreferences, "personal-digest-preferences","@"),
ARGPARSE_s_s (oPersonalCompressPreferences,
"personal-compress-preferences", "@"),
ARGPARSE_s_s (oFakedSystemTime, "faked-system-time", "@"),
/* Aliases. I constantly mistype these, and assume other people do
as well. */
ARGPARSE_s_s (oPersonalCipherPreferences, "personal-cipher-prefs", "@"),
ARGPARSE_s_s (oPersonalDigestPreferences, "personal-digest-prefs", "@"),
ARGPARSE_s_s (oPersonalCompressPreferences, "personal-compress-prefs", "@"),
ARGPARSE_s_s (oAgentProgram, "agent-program", "@"),
ARGPARSE_s_s (oDirmngrProgram, "dirmngr-program", "@"),
ARGPARSE_s_s (oDisplay, "display", "@"),
ARGPARSE_s_s (oTTYname, "ttyname", "@"),
ARGPARSE_s_s (oTTYtype, "ttytype", "@"),
ARGPARSE_s_s (oLCctype, "lc-ctype", "@"),
ARGPARSE_s_s (oLCmessages, "lc-messages","@"),
ARGPARSE_s_s (oXauthority, "xauthority", "@"),
ARGPARSE_s_s (oGroup, "group", "@"),
ARGPARSE_s_s (oUnGroup, "ungroup", "@"),
ARGPARSE_s_n (oNoGroups, "no-groups", "@"),
ARGPARSE_s_n (oStrict, "strict", "@"),
ARGPARSE_s_n (oNoStrict, "no-strict", "@"),
ARGPARSE_s_n (oMangleDosFilenames, "mangle-dos-filenames", "@"),
ARGPARSE_s_n (oNoMangleDosFilenames, "no-mangle-dos-filenames", "@"),
ARGPARSE_s_n (oEnableProgressFilter, "enable-progress-filter", "@"),
ARGPARSE_s_n (oMultifile, "multifile", "@"),
ARGPARSE_s_s (oKeyidFormat, "keyid-format", "@"),
ARGPARSE_s_n (oExitOnStatusWriteError, "exit-on-status-write-error", "@"),
ARGPARSE_s_i (oLimitCardInsertTries, "limit-card-insert-tries", "@"),
ARGPARSE_s_n (oAllowMultisigVerification,
"allow-multisig-verification", "@"),
ARGPARSE_s_n (oEnableDSA2, "enable-dsa2", "@"),
ARGPARSE_s_n (oDisableDSA2, "disable-dsa2", "@"),
ARGPARSE_s_n (oAllowMultipleMessages, "allow-multiple-messages", "@"),
ARGPARSE_s_n (oNoAllowMultipleMessages, "no-allow-multiple-messages", "@"),
ARGPARSE_s_n (oAllowWeakDigestAlgos, "allow-weak-digest-algos", "@"),
/* These two are aliases to help users of the PGP command line
product use gpg with minimal pain. Many commands are common
already as they seem to have borrowed commands from us. Now I'm
returning the favor. */
ARGPARSE_s_s (oLocalUser, "sign-with", "@"),
ARGPARSE_s_s (oRecipient, "user", "@"),
ARGPARSE_s_n (oRequireCrossCert, "require-backsigs", "@"),
ARGPARSE_s_n (oRequireCrossCert, "require-cross-certification", "@"),
ARGPARSE_s_n (oNoRequireCrossCert, "no-require-backsigs", "@"),
ARGPARSE_s_n (oNoRequireCrossCert, "no-require-cross-certification", "@"),
/* New options. Fixme: Should go more to the top. */
ARGPARSE_s_s (oAutoKeyLocate, "auto-key-locate", "@"),
ARGPARSE_s_n (oNoAutoKeyLocate, "no-auto-key-locate", "@"),
ARGPARSE_end ()
};
#ifdef ENABLE_SELINUX_HACKS
#define ALWAYS_ADD_KEYRINGS 1
#else
#define ALWAYS_ADD_KEYRINGS 0
#endif
int g10_errors_seen = 0;
static int utf8_strings = 0;
static int maybe_setuid = 1;
static char *build_list( const char *text, char letter,
const char *(*mapf)(int), int (*chkf)(int) );
static void set_cmd( enum cmd_and_opt_values *ret_cmd,
enum cmd_and_opt_values new_cmd );
static void print_mds( const char *fname, int algo );
static void add_notation_data( const char *string, int which );
static void add_policy_url( const char *string, int which );
static void add_keyserver_url( const char *string, int which );
static void emergency_cleanup (void);
static char *
make_libversion (const char *libname, const char *(*getfnc)(const char*))
{
const char *s;
char *result;
if (maybe_setuid)
{
gcry_control (GCRYCTL_INIT_SECMEM, 0, 0); /* Drop setuid. */
maybe_setuid = 0;
}
s = getfnc (NULL);
result = xmalloc (strlen (libname) + 1 + strlen (s) + 1);
strcpy (stpcpy (stpcpy (result, libname), " "), s);
return result;
}
static int
build_list_pk_test_algo (int algo)
{
return openpgp_pk_test_algo (algo);
}
static const char *
build_list_pk_algo_name (int algo)
{
return openpgp_pk_algo_name (algo);
}
static int
build_list_cipher_test_algo (int algo)
{
return openpgp_cipher_test_algo (algo);
}
static const char *
build_list_cipher_algo_name (int algo)
{
return openpgp_cipher_algo_name (algo);
}
static int
build_list_md_test_algo (int algo)
{
return openpgp_md_test_algo (algo);
}
static const char *
build_list_md_algo_name (int algo)
{
return openpgp_md_algo_name (algo);
}
static const char *
my_strusage( int level )
{
static char *digests, *pubkeys, *ciphers, *zips, *ver_gcry;
const char *p;
switch( level ) {
case 11: p = "@GPG@ (@GNUPG@)";
break;
case 13: p = VERSION; break;
case 17: p = PRINTABLE_OS_NAME; break;
case 19: p = _("Please report bugs to <@EMAIL@>.\n"); break;
case 20:
if (!ver_gcry)
ver_gcry = make_libversion ("libgcrypt", gcry_check_version);
p = ver_gcry;
break;
#ifdef IS_DEVELOPMENT_VERSION
case 25:
p="NOTE: THIS IS A DEVELOPMENT VERSION!";
break;
case 26:
p="It is only intended for test purposes and should NOT be";
break;
case 27:
p="used in a production environment or with production keys!";
break;
#endif
case 1:
case 40: p =
_("Usage: @GPG@ [options] [files] (-h for help)");
break;
case 41: p =
_("Syntax: @GPG@ [options] [files]\n"
"Sign, check, encrypt or decrypt\n"
"Default operation depends on the input data\n");
break;
case 31: p = "\nHome: "; break;
#ifndef __riscos__
case 32: p = opt.homedir; break;
#else /* __riscos__ */
case 32: p = make_filename(opt.homedir, NULL); break;
#endif /* __riscos__ */
case 33: p = _("\nSupported algorithms:\n"); break;
case 34:
if (!pubkeys)
pubkeys = build_list (_("Pubkey: "), 1,
build_list_pk_algo_name,
build_list_pk_test_algo );
p = pubkeys;
break;
case 35:
if( !ciphers )
ciphers = build_list(_("Cipher: "), 'S',
build_list_cipher_algo_name,
build_list_cipher_test_algo );
p = ciphers;
break;
case 36:
if( !digests )
digests = build_list(_("Hash: "), 'H',
build_list_md_algo_name,
build_list_md_test_algo );
p = digests;
break;
case 37:
if( !zips )
zips = build_list(_("Compression: "),'Z',
compress_algo_to_string,
check_compress_algo);
p = zips;
break;
default: p = NULL;
}
return p;
}
static char *
build_list (const char *text, char letter,
const char * (*mapf)(int), int (*chkf)(int))
{
membuf_t mb;
int indent;
int i, j, len;
const char *s;
char *string;
if (maybe_setuid)
gcry_control (GCRYCTL_INIT_SECMEM, 0, 0); /* Drop setuid. */
indent = utf8_charcount (text);
len = 0;
init_membuf (&mb, 512);
for (i=0; i <= 110; i++ )
{
if (!chkf (i) && (s = mapf (i)))
{
if (mb.len - len > 60)
{
put_membuf_str (&mb, ",\n");
len = mb.len;
for (j=0; j < indent; j++)
put_membuf_str (&mb, " ");
}
else if (mb.len)
put_membuf_str (&mb, ", ");
else
put_membuf_str (&mb, text);
put_membuf_str (&mb, s);
if (opt.verbose && letter)
{
char num[20];
if (letter == 1)
snprintf (num, sizeof num, " (%d)", i);
else
snprintf (num, sizeof num, " (%c%d)", letter, i);
put_membuf_str (&mb, num);
}
}
}
if (mb.len)
put_membuf_str (&mb, "\n");
put_membuf (&mb, "", 1);
string = get_membuf (&mb, NULL);
return xrealloc (string, strlen (string)+1);
}
static void
wrong_args( const char *text)
{
fputs(_("usage: gpg [options] "),stderr);
fputs(text,stderr);
putc('\n',stderr);
g10_exit(2);
}
static char *
make_username( const char *string )
{
char *p;
if( utf8_strings )
p = xstrdup(string);
else
p = native_to_utf8( string );
return p;
}
static void
set_opt_session_env (const char *name, const char *value)
{
gpg_error_t err;
err = session_env_setenv (opt.session_env, name, value);
if (err)
log_fatal ("error setting session environment: %s\n",
gpg_strerror (err));
}
/* Setup the debugging. With a LEVEL of NULL only the active debug
flags are propagated to the subsystems. With LEVEL set, a specific
set of debug flags is set; thus overriding all flags already
set. */
static void
set_debug (const char *level)
{
int numok = (level && digitp (level));
int numlvl = numok? atoi (level) : 0;
if (!level)
;
else if (!strcmp (level, "none") || (numok && numlvl < 1))
opt.debug = 0;
else if (!strcmp (level, "basic") || (numok && numlvl <= 2))
opt.debug = DBG_MEMSTAT_VALUE;
else if (!strcmp (level, "advanced") || (numok && numlvl <= 5))
opt.debug = DBG_MEMSTAT_VALUE|DBG_TRUST_VALUE|DBG_EXTPROG_VALUE;
else if (!strcmp (level, "expert") || (numok && numlvl <= 8))
opt.debug = (DBG_MEMSTAT_VALUE|DBG_TRUST_VALUE|DBG_EXTPROG_VALUE
|DBG_CACHE_VALUE|DBG_FILTER_VALUE|DBG_PACKET_VALUE);
else if (!strcmp (level, "guru") || numok)
{
opt.debug = ~0;
/* Unless the "guru" string has been used we don't want to allow
hashing debugging. The rationale is that people tend to
select the highest debug value and would then clutter their
disk with debug files which may reveal confidential data. */
if (numok)
opt.debug &= ~(DBG_HASHING_VALUE);
}
else
{
log_error (_("invalid debug-level '%s' given\n"), level);
g10_exit (2);
}
if (opt.debug & DBG_MEMORY_VALUE )
memory_debug_mode = 1;
if (opt.debug & DBG_MEMSTAT_VALUE )
memory_stat_debug_mode = 1;
if (opt.debug & DBG_MPI_VALUE)
gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 2);
if (opt.debug & DBG_CIPHER_VALUE )
gcry_control (GCRYCTL_SET_DEBUG_FLAGS, 1);
if (opt.debug & DBG_IOBUF_VALUE )
iobuf_debug_mode = 1;
gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose);
if (opt.debug)
log_info ("enabled debug flags:%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
(opt.debug & DBG_PACKET_VALUE )? " packet":"",
(opt.debug & DBG_MPI_VALUE )? " mpi":"",
(opt.debug & DBG_CIPHER_VALUE )? " cipher":"",
(opt.debug & DBG_FILTER_VALUE )? " filter":"",
(opt.debug & DBG_IOBUF_VALUE )? " iobuf":"",
(opt.debug & DBG_MEMORY_VALUE )? " memory":"",
(opt.debug & DBG_CACHE_VALUE )? " cache":"",
(opt.debug & DBG_MEMSTAT_VALUE)? " memstat":"",
(opt.debug & DBG_TRUST_VALUE )? " trust":"",
(opt.debug & DBG_HASHING_VALUE)? " hashing":"",
(opt.debug & DBG_EXTPROG_VALUE)? " extprog":"",
(opt.debug & DBG_CARD_IO_VALUE)? " cardio":"",
(opt.debug & DBG_ASSUAN_VALUE )? " assuan":"",
(opt.debug & DBG_CLOCK_VALUE )? " clock":"");
}
/* We need the home directory also in some other directories, so make
sure that both variables are always in sync. */
static void
set_homedir (const char *dir)
{
if (!dir)
dir = "";
opt.homedir = dir;
}
/* We set the screen dimensions for UI purposes. Do not allow screens
smaller than 80x24 for the sake of simplicity. */
static void
set_screen_dimensions(void)
{
#ifndef HAVE_W32_SYSTEM
char *str;
str=getenv("COLUMNS");
if(str)
opt.screen_columns=atoi(str);
str=getenv("LINES");
if(str)
opt.screen_lines=atoi(str);
#endif
if(opt.screen_columns<80 || opt.screen_columns>255)
opt.screen_columns=80;
if(opt.screen_lines<24 || opt.screen_lines>255)
opt.screen_lines=24;
}
/* Helper to open a file FNAME either for reading or writing to be
used with --status-file etc functions. Not generally useful but it
avoids the riscos specific functions and well some Windows people
might like it too. Prints an error message and returns -1 on
error. On success the file descriptor is returned. */
static int
open_info_file (const char *fname, int for_write, int binary)
{
#ifdef __riscos__
return riscos_fdopenfile (fname, for_write);
#elif defined (ENABLE_SELINUX_HACKS)
/* We can't allow these even when testing for a secured filename
because files to be secured might not yet been secured. This is
similar to the option file but in that case it is unlikely that
sensitive information may be retrieved by means of error
messages. */
(void)fname;
(void)for_write;
(void)binary;
return -1;
#else
int fd;
if (binary)
binary = MY_O_BINARY;
/* if (is_secured_filename (fname)) */
/* { */
/* fd = -1; */
/* gpg_err_set_errno (EPERM); */
/* } */
/* else */
/* { */
do
{
if (for_write)
fd = open (fname, O_CREAT | O_TRUNC | O_WRONLY | binary,
S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
else
fd = open (fname, O_RDONLY | binary);
}
while (fd == -1 && errno == EINTR);
/* } */
if ( fd == -1)
log_error ( for_write? _("can't create '%s': %s\n")
: _("can't open '%s': %s\n"), fname, strerror(errno));
return fd;
#endif
}
static void
set_cmd( enum cmd_and_opt_values *ret_cmd, enum cmd_and_opt_values new_cmd )
{
enum cmd_and_opt_values cmd = *ret_cmd;
if( !cmd || cmd == new_cmd )
cmd = new_cmd;
else if( cmd == aSign && new_cmd == aEncr )
cmd = aSignEncr;
else if( cmd == aEncr && new_cmd == aSign )
cmd = aSignEncr;
else if( cmd == aSign && new_cmd == aSym )
cmd = aSignSym;
else if( cmd == aSym && new_cmd == aSign )
cmd = aSignSym;
else if( cmd == aSym && new_cmd == aEncr )
cmd = aEncrSym;
else if( cmd == aEncr && new_cmd == aSym )
cmd = aEncrSym;
else if (cmd == aSignEncr && new_cmd == aSym)
cmd = aSignEncrSym;
else if (cmd == aSignSym && new_cmd == aEncr)
cmd = aSignEncrSym;
else if (cmd == aEncrSym && new_cmd == aSign)
cmd = aSignEncrSym;
else if( ( cmd == aSign && new_cmd == aClearsign )
|| ( cmd == aClearsign && new_cmd == aSign ) )
cmd = aClearsign;
else {
log_error(_("conflicting commands\n"));
g10_exit(2);
}
*ret_cmd = cmd;
}
static void
add_group(char *string)
{
char *name,*value;
struct groupitem *item;
/* Break off the group name */
name=strsep(&string,"=");
if(string==NULL)
{
log_error(_("no = sign found in group definition '%s'\n"),name);
return;
}
trim_trailing_ws(name,strlen(name));
/* Does this group already exist? */
for(item=opt.grouplist;item;item=item->next)
if(strcasecmp(item->name,name)==0)
break;
if(!item)
{
item=xmalloc(sizeof(struct groupitem));
item->name=name;
item->next=opt.grouplist;
item->values=NULL;
opt.grouplist=item;
}
/* Break apart the values */
while ((value= strsep(&string," \t")))
{
if (*value)
add_to_strlist2(&item->values,value,utf8_strings);
}
}
static void
rm_group(char *name)
{
struct groupitem *item,*last=NULL;
trim_trailing_ws(name,strlen(name));
for(item=opt.grouplist;item;last=item,item=item->next)
{
if(strcasecmp(item->name,name)==0)
{
if(last)
last->next=item->next;
else
opt.grouplist=item->next;
free_strlist(item->values);
xfree(item);
break;
}
}
}
/* We need to check three things.
0) The homedir. It must be x00, a directory, and owned by the
user.
1) The options/gpg.conf file. Okay unless it or its containing
directory is group or other writable or not owned by us. Disable
exec in this case.
2) Extensions. Same as #1.
Returns true if the item is unsafe. */
static int
check_permissions (const char *path, int item)
{
#if defined(HAVE_STAT) && !defined(HAVE_DOSISH_SYSTEM)
static int homedir_cache=-1;
char *tmppath,*dir;
struct stat statbuf,dirbuf;
int homedir=0,ret=0,checkonly=0;
int perm=0,own=0,enc_dir_perm=0,enc_dir_own=0;
if(opt.no_perm_warn)
return 0;
assert(item==0 || item==1 || item==2);
/* extensions may attach a path */
if(item==2 && path[0]!=DIRSEP_C)
{
if(strchr(path,DIRSEP_C))
tmppath=make_filename(path,NULL);
else
tmppath=make_filename(gnupg_libdir (),path,NULL);
}
else
tmppath=xstrdup(path);
/* If the item is located in the homedir, but isn't the homedir,
don't continue if we already checked the homedir itself. This is
to avoid user confusion with an extra options file warning which
could be rectified if the homedir itself had proper
permissions. */
if(item!=0 && homedir_cache>-1
&& ascii_strncasecmp(opt.homedir,tmppath,strlen(opt.homedir))==0)
{
ret=homedir_cache;
goto end;
}
/* It's okay if the file or directory doesn't exist */
if(stat(tmppath,&statbuf)!=0)
{
ret=0;
goto end;
}
/* Now check the enclosing directory. Theoretically, we could walk
this test up to the root directory /, but for the sake of sanity,
I'm stopping at one level down. */
dir=make_dirname(tmppath);
if(stat(dir,&dirbuf)!=0 || !S_ISDIR(dirbuf.st_mode))
{
/* Weird error */
ret=1;
goto end;
}
xfree(dir);
/* Assume failure */
ret=1;
if(item==0)
{
/* The homedir must be x00, a directory, and owned by the user. */
if(S_ISDIR(statbuf.st_mode))
{
if(statbuf.st_uid==getuid())
{
if((statbuf.st_mode & (S_IRWXG|S_IRWXO))==0)
ret=0;
else
perm=1;
}
else
own=1;
homedir_cache=ret;
}
}
else if(item==1 || item==2)
{
/* The options or extension file. Okay unless it or its
containing directory is group or other writable or not owned
by us or root. */
if(S_ISREG(statbuf.st_mode))
{
if(statbuf.st_uid==getuid() || statbuf.st_uid==0)
{
if((statbuf.st_mode & (S_IWGRP|S_IWOTH))==0)
{
/* it's not writable, so make sure the enclosing
directory is also not writable */
if(dirbuf.st_uid==getuid() || dirbuf.st_uid==0)
{
if((dirbuf.st_mode & (S_IWGRP|S_IWOTH))==0)
ret=0;
else
enc_dir_perm=1;
}
else
enc_dir_own=1;
}
else
{
/* it's writable, so the enclosing directory had
better not let people get to it. */
if(dirbuf.st_uid==getuid() || dirbuf.st_uid==0)
{
if((dirbuf.st_mode & (S_IRWXG|S_IRWXO))==0)
ret=0;
else
perm=enc_dir_perm=1; /* unclear which one to fix! */
}
else
enc_dir_own=1;
}
}
else
own=1;
}
}
else
BUG();
if(!checkonly)
{
if(own)
{
if(item==0)
log_info(_("WARNING: unsafe ownership on"
" homedir '%s'\n"),tmppath);
else if(item==1)
log_info(_("WARNING: unsafe ownership on"
" configuration file '%s'\n"),tmppath);
else
log_info(_("WARNING: unsafe ownership on"
" extension '%s'\n"),tmppath);
}
if(perm)
{
if(item==0)
log_info(_("WARNING: unsafe permissions on"
" homedir '%s'\n"),tmppath);
else if(item==1)
log_info(_("WARNING: unsafe permissions on"
" configuration file '%s'\n"),tmppath);
else
log_info(_("WARNING: unsafe permissions on"
" extension '%s'\n"),tmppath);
}
if(enc_dir_own)
{
if(item==0)
log_info(_("WARNING: unsafe enclosing directory ownership on"
" homedir '%s'\n"),tmppath);
else if(item==1)
log_info(_("WARNING: unsafe enclosing directory ownership on"
" configuration file '%s'\n"),tmppath);
else
log_info(_("WARNING: unsafe enclosing directory ownership on"
" extension '%s'\n"),tmppath);
}
if(enc_dir_perm)
{
if(item==0)
log_info(_("WARNING: unsafe enclosing directory permissions on"
" homedir '%s'\n"),tmppath);
else if(item==1)
log_info(_("WARNING: unsafe enclosing directory permissions on"
" configuration file '%s'\n"),tmppath);
else
log_info(_("WARNING: unsafe enclosing directory permissions on"
" extension '%s'\n"),tmppath);
}
}
end:
xfree(tmppath);
if(homedir)
homedir_cache=ret;
return ret;
#else /*!(HAVE_STAT && !HAVE_DOSISH_SYSTEM)*/
(void)path;
(void)item;
return 0;
#endif /*!(HAVE_STAT && !HAVE_DOSISH_SYSTEM)*/
}
/* Print the OpenPGP defined algo numbers. */
static void
print_algo_numbers(int (*checker)(int))
{
int i,first=1;
for(i=0;i<=110;i++)
{
if(!checker(i))
{
if(first)
first=0;
else
es_printf (";");
es_printf ("%d",i);
}
}
}
static void
print_algo_names(int (*checker)(int),const char *(*mapper)(int))
{
int i,first=1;
for(i=0;i<=110;i++)
{
if(!checker(i))
{
if(first)
first=0;
else
es_printf (";");
es_printf ("%s",mapper(i));
}
}
}
/* In the future, we can do all sorts of interesting configuration
output here. For now, just give "group" as the Enigmail folks need
it, and pubkey, cipher, hash, and compress as they may be useful
for frontends. */
static void
list_config(char *items)
{
int show_all=(items==NULL);
char *name=NULL;
if(!opt.with_colons)
return;
while(show_all || (name=strsep(&items," ")))
{
int any=0;
if(show_all || ascii_strcasecmp(name,"group")==0)
{
struct groupitem *iter;
for(iter=opt.grouplist;iter;iter=iter->next)
{
strlist_t sl;
es_fprintf (es_stdout, "cfg:group:");
es_write_sanitized (es_stdout, iter->name, strlen(iter->name),
":", NULL);
es_putc (':', es_stdout);
for(sl=iter->values;sl;sl=sl->next)
{
print_sanitized_string2 (stdout, sl->d, ':',';');
if(sl->next)
es_printf(";");
}
es_printf("\n");
}
any=1;
}
if(show_all || ascii_strcasecmp(name,"version")==0)
{
es_printf("cfg:version:");
es_write_sanitized (es_stdout, VERSION, strlen(VERSION), ":", NULL);
es_printf ("\n");
any=1;
}
if(show_all || ascii_strcasecmp(name,"pubkey")==0)
{
es_printf ("cfg:pubkey:");
print_algo_numbers (build_list_pk_test_algo);
es_printf ("\n");
any=1;
}
if(show_all || ascii_strcasecmp(name,"pubkeyname")==0)
{
es_printf ("cfg:pubkeyname:");
print_algo_names (build_list_pk_test_algo,
build_list_pk_algo_name);
es_printf ("\n");
any=1;
}
if(show_all || ascii_strcasecmp(name,"cipher")==0)
{
es_printf ("cfg:cipher:");
print_algo_numbers (build_list_cipher_test_algo);
es_printf ("\n");
any=1;
}
if (show_all || !ascii_strcasecmp (name,"ciphername"))
{
es_printf ("cfg:ciphername:");
print_algo_names (build_list_cipher_test_algo,
build_list_cipher_algo_name);
es_printf ("\n");
any = 1;
}
if(show_all
|| ascii_strcasecmp(name,"digest")==0
|| ascii_strcasecmp(name,"hash")==0)
{
es_printf ("cfg:digest:");
print_algo_numbers (build_list_md_test_algo);
es_printf ("\n");
any=1;
}
if (show_all
|| !ascii_strcasecmp(name,"digestname")
|| !ascii_strcasecmp(name,"hashname"))
{
es_printf ("cfg:digestname:");
print_algo_names (build_list_md_test_algo,
build_list_md_algo_name);
es_printf ("\n");
any=1;
}
if(show_all || ascii_strcasecmp(name,"compress")==0)
{
es_printf ("cfg:compress:");
print_algo_numbers(check_compress_algo);
es_printf ("\n");
any=1;
}
if(show_all || ascii_strcasecmp(name,"ccid-reader-id")==0)
{
#if defined(ENABLE_CARD_SUPPORT) && defined(HAVE_LIBUSB) \
&& GNUPG_MAJOR_VERSION == 1
char *p, *p2, *list = ccid_get_reader_list ();
for (p=list; p && (p2 = strchr (p, '\n')); p = p2+1)
{
*p2 = 0;
es_printf ("cfg:ccid-reader-id:%s\n", p);
}
free (list);
#endif
any=1;
}
if(show_all)
break;
if(!any)
log_error(_("unknown configuration item '%s'\n"),name);
}
}
/* List options and default values in the GPG Conf format. This is a
new tool distributed with gnupg 1.9.x but we also want some limited
support in older gpg versions. The output is the name of the
configuration file and a list of options available for editing by
gpgconf. */
static void
gpgconf_list (const char *configfile)
{
char *configfile_esc = percent_escape (configfile, NULL);
es_printf ("gpgconf-gpg.conf:%lu:\"%s\n",
GC_OPT_FLAG_DEFAULT,
configfile_esc ? configfile_esc : "/dev/null");
es_printf ("verbose:%lu:\n", GC_OPT_FLAG_NONE);
es_printf ("quiet:%lu:\n", GC_OPT_FLAG_NONE);
es_printf ("keyserver:%lu:\n", GC_OPT_FLAG_NONE);
es_printf ("reader-port:%lu:\n", GC_OPT_FLAG_NONE);
es_printf ("default-key:%lu:\n", GC_OPT_FLAG_NONE);
es_printf ("encrypt-to:%lu:\n", GC_OPT_FLAG_NONE);
es_printf ("try-secret-key:%lu:\n", GC_OPT_FLAG_NONE);
es_printf ("auto-key-locate:%lu:\n", GC_OPT_FLAG_NONE);
es_printf ("log-file:%lu:\n", GC_OPT_FLAG_NONE);
es_printf ("debug-level:%lu:\"none:\n", GC_OPT_FLAG_DEFAULT);
es_printf ("group:%lu:\n", GC_OPT_FLAG_NONE);
/* The next one is an info only item and should match the macros at
the top of keygen.c */
es_printf ("default_pubkey_algo:%lu:\"%s:\n", GC_OPT_FLAG_DEFAULT,
"RSA-2048");
xfree (configfile_esc);
}
static int
parse_subpacket_list(char *list)
{
char *tok;
byte subpackets[128],i;
int count=0;
if(!list)
{
/* No arguments means all subpackets */
memset(subpackets+1,1,sizeof(subpackets)-1);
count=127;
}
else
{
memset(subpackets,0,sizeof(subpackets));
/* Merge with earlier copy */
if(opt.show_subpackets)
{
byte *in;
for(in=opt.show_subpackets;*in;in++)
{
if(*in>127 || *in<1)
BUG();
if(!subpackets[*in])
count++;
subpackets[*in]=1;
}
}
while((tok=strsep(&list," ,")))
{
if(!*tok)
continue;
i=atoi(tok);
if(i>127 || i<1)
return 0;
if(!subpackets[i])
count++;
subpackets[i]=1;
}
}
xfree(opt.show_subpackets);
opt.show_subpackets=xmalloc(count+1);
opt.show_subpackets[count--]=0;
for(i=1;i<128 && count>=0;i++)
if(subpackets[i])
opt.show_subpackets[count--]=i;
return 1;
}
static int
parse_list_options(char *str)
{
char *subpackets=""; /* something that isn't NULL */
struct parse_options lopts[]=
{
{"show-photos",LIST_SHOW_PHOTOS,NULL,
N_("display photo IDs during key listings")},
{"show-policy-urls",LIST_SHOW_POLICY_URLS,NULL,
N_("show policy URLs during signature listings")},
{"show-notations",LIST_SHOW_NOTATIONS,NULL,
N_("show all notations during signature listings")},
{"show-std-notations",LIST_SHOW_STD_NOTATIONS,NULL,
N_("show IETF standard notations during signature listings")},
{"show-standard-notations",LIST_SHOW_STD_NOTATIONS,NULL,
NULL},
{"show-user-notations",LIST_SHOW_USER_NOTATIONS,NULL,
N_("show user-supplied notations during signature listings")},
{"show-keyserver-urls",LIST_SHOW_KEYSERVER_URLS,NULL,
N_("show preferred keyserver URLs during signature listings")},
{"show-uid-validity",LIST_SHOW_UID_VALIDITY,NULL,
N_("show user ID validity during key listings")},
{"show-unusable-uids",LIST_SHOW_UNUSABLE_UIDS,NULL,
N_("show revoked and expired user IDs in key listings")},
{"show-unusable-subkeys",LIST_SHOW_UNUSABLE_SUBKEYS,NULL,
N_("show revoked and expired subkeys in key listings")},
{"show-keyring",LIST_SHOW_KEYRING,NULL,
N_("show the keyring name in key listings")},
{"show-sig-expire",LIST_SHOW_SIG_EXPIRE,NULL,
N_("show expiration dates during signature listings")},
{"show-sig-subpackets",LIST_SHOW_SIG_SUBPACKETS,NULL,
NULL},
{NULL,0,NULL,NULL}
};
/* C99 allows for non-constant initializers, but we'd like to
compile everywhere, so fill in the show-sig-subpackets argument
here. Note that if the parse_options array changes, we'll have
to change the subscript here. */
lopts[12].value=&subpackets;
if(parse_options(str,&opt.list_options,lopts,1))
{
if(opt.list_options&LIST_SHOW_SIG_SUBPACKETS)
{
/* Unset so users can pass multiple lists in. */
opt.list_options&=~LIST_SHOW_SIG_SUBPACKETS;
if(!parse_subpacket_list(subpackets))
return 0;
}
else if(subpackets==NULL && opt.show_subpackets)
{
/* User did 'no-show-subpackets' */
xfree(opt.show_subpackets);
opt.show_subpackets=NULL;
}
return 1;
}
else
return 0;
}
/* Collapses argc/argv into a single string that must be freed */
static char *
collapse_args(int argc,char *argv[])
{
char *str=NULL;
int i,first=1,len=0;
for(i=0;i<argc;i++)
{
len+=strlen(argv[i])+2;
str=xrealloc(str,len);
if(first)
{
str[0]='\0';
first=0;
}
else
strcat(str," ");
strcat(str,argv[i]);
}
return str;
}
#ifndef NO_TRUST_MODELS
static void
parse_trust_model(const char *model)
{
if(ascii_strcasecmp(model,"pgp")==0)
opt.trust_model=TM_PGP;
else if(ascii_strcasecmp(model,"classic")==0)
opt.trust_model=TM_CLASSIC;
else if(ascii_strcasecmp(model,"always")==0)
opt.trust_model=TM_ALWAYS;
else if(ascii_strcasecmp(model,"direct")==0)
opt.trust_model=TM_DIRECT;
else if(ascii_strcasecmp(model,"auto")==0)
opt.trust_model=TM_AUTO;
else
log_error("unknown trust model '%s'\n",model);
}
#endif /*NO_TRUST_MODELS*/
/* This fucntion called to initialized a new control object. It is
assumed that this object has been zeroed out before calling this
function. */
static void
gpg_init_default_ctrl (ctrl_t ctrl)
{
(void)ctrl;
}
/* This function is called to deinitialize a control object. It is
not deallocated. */
static void
gpg_deinit_default_ctrl (ctrl_t ctrl)
{
gpg_dirmngr_deinit_session_data (ctrl);
}
char *
get_default_configname (void)
{
char *configname = NULL;
char *name = xstrdup (GPG_NAME EXTSEP_S "conf-" SAFE_VERSION);
char *ver = &name[strlen (GPG_NAME EXTSEP_S "conf-")];
do
{
if (configname)
{
char *tok;
xfree (configname);
configname = NULL;
if ((tok = strrchr (ver, SAFE_VERSION_DASH)))
*tok='\0';
else if ((tok = strrchr (ver, SAFE_VERSION_DOT)))
*tok='\0';
else
break;
}
configname = make_filename (opt.homedir, name, NULL);
}
while (access (configname, R_OK));
xfree(name);
if (! configname)
configname = make_filename (opt.homedir, GPG_NAME EXTSEP_S "conf", NULL);
if (! access (configname, R_OK))
{
/* Print a warning when both config files are present. */
char *p = make_filename (opt.homedir, "options", NULL);
if (! access (p, R_OK))
log_info (_("NOTE: old default options file '%s' ignored\n"), p);
xfree (p);
}
else
{
/* Use the old default only if it exists. */
char *p = make_filename (opt.homedir, "options", NULL);
if (!access (p, R_OK))
{
xfree (configname);
configname = p;
}
else
xfree (p);
}
return configname;
}
int
main (int argc, char **argv)
{
ARGPARSE_ARGS pargs;
IOBUF a;
int rc=0;
int orig_argc;
char **orig_argv;
const char *fname;
char *username;
int may_coredump;
strlist_t sl, remusr= NULL, locusr=NULL;
strlist_t nrings = NULL;
armor_filter_context_t *afx = NULL;
int detached_sig = 0;
FILE *configfp = NULL;
char *configname = NULL;
char *save_configname = NULL;
char *default_configname = NULL;
unsigned configlineno;
int parse_debug = 0;
int default_config = 1;
int default_keyring = 1;
int greeting = 0;
int nogreeting = 0;
char *logfile = NULL;
int use_random_seed = 1;
enum cmd_and_opt_values cmd = 0;
const char *debug_level = NULL;
#ifndef NO_TRUST_MODELS
const char *trustdb_name = NULL;
#endif /*!NO_TRUST_MODELS*/
char *def_cipher_string = NULL;
char *def_digest_string = NULL;
char *compress_algo_string = NULL;
char *cert_digest_string = NULL;
char *s2k_cipher_string = NULL;
char *s2k_digest_string = NULL;
char *pers_cipher_list = NULL;
char *pers_digest_list = NULL;
char *pers_compress_list = NULL;
int eyes_only=0;
int multifile=0;
int pwfd = -1;
int fpr_maybe_cmd = 0; /* --fingerprint maybe a command. */
int any_explicit_recipient = 0;
int require_secmem=0,got_secmem=0;
struct assuan_malloc_hooks malloc_hooks;
ctrl_t ctrl;
#ifdef __riscos__
opt.lock_once = 1;
#endif /* __riscos__ */
/* Please note that we may running SUID(ROOT), so be very CAREFUL
when adding any stuff between here and the call to
secmem_init() somewhere after the option parsing. */
gnupg_reopen_std (GPG_NAME);
trap_unaligned ();
gnupg_rl_initialize ();
set_strusage (my_strusage);
gcry_control (GCRYCTL_SUSPEND_SECMEM_WARN);
log_set_prefix (GPG_NAME, 1);
/* Make sure that our subsystems are ready. */
i18n_init();
init_common_subsystems (&argc, &argv);
/* Check that the libraries are suitable. Do it right here because the
option parsing may need services of the library. */
if (!gcry_check_version (NEED_LIBGCRYPT_VERSION) )
{
log_fatal ( _("libgcrypt is too old (need %s, have %s)\n"),
NEED_LIBGCRYPT_VERSION, gcry_check_version (NULL) );
}
/* Use our own logging handler for Libcgrypt. */
setup_libgcrypt_logging ();
/* Put random number into secure memory */
gcry_control (GCRYCTL_USE_SECURE_RNDPOOL);
may_coredump = disable_core_dumps();
gnupg_init_signals (0, emergency_cleanup);
dotlock_create (NULL, 0); /* Register lock file cleanup. */
opt.session_env = session_env_new ();
if (!opt.session_env)
log_fatal ("error allocating session environment block: %s\n",
strerror (errno));
opt.command_fd = -1; /* no command fd */
opt.compress_level = -1; /* defaults to standard compress level */
opt.bz2_compress_level = -1; /* defaults to standard compress level */
/* note: if you change these lines, look at oOpenPGP */
opt.def_cipher_algo = 0;
opt.def_digest_algo = 0;
opt.cert_digest_algo = 0;
opt.compress_algo = -1; /* defaults to DEFAULT_COMPRESS_ALGO */
opt.s2k_mode = 3; /* iterated+salted */
opt.s2k_count = 0; /* Auto-calibrate when needed. */
opt.s2k_cipher_algo = CIPHER_ALGO_CAST5;
opt.completes_needed = 1;
opt.marginals_needed = 3;
opt.max_cert_depth = 5;
opt.pgp2_workarounds = 1;
opt.escape_from = 1;
opt.flags.require_cross_cert = 1;
opt.import_options = 0;
opt.export_options = EXPORT_ATTRIBUTES;
opt.keyserver_options.import_options = IMPORT_REPAIR_PKS_SUBKEY_BUG;
opt.keyserver_options.export_options = EXPORT_ATTRIBUTES;
opt.keyserver_options.options = (KEYSERVER_HONOR_KEYSERVER_URL
| KEYSERVER_HONOR_PKA_RECORD );
opt.verify_options = (VERIFY_SHOW_POLICY_URLS
| VERIFY_SHOW_STD_NOTATIONS
| VERIFY_SHOW_KEYSERVER_URLS);
#ifdef NO_TRUST_MODELS
opt.trust_model = TM_ALWAYS;
#else
opt.trust_model = TM_AUTO;
#endif
opt.mangle_dos_filenames = 0;
opt.min_cert_level = 2;
set_screen_dimensions ();
opt.keyid_format = KF_SHORT;
opt.def_sig_expire = "0";
opt.def_cert_expire = "0";
set_homedir (default_homedir ());
opt.passphrase_repeat = 1;
opt.emit_version = 1; /* Limit to the major number. */
/* Check whether we have a config file on the command line. */
orig_argc = argc;
orig_argv = argv;
pargs.argc = &argc;
pargs.argv = &argv;
pargs.flags= (ARGPARSE_FLAG_KEEP | ARGPARSE_FLAG_NOVERSION);
while( arg_parse( &pargs, opts) ) {
if( pargs.r_opt == oDebug || pargs.r_opt == oDebugAll )
parse_debug++;
else if( pargs.r_opt == oOptions ) {
/* yes there is one, so we do not try the default one, but
* read the option file when it is encountered at the commandline
*/
default_config = 0;
}
else if( pargs.r_opt == oNoOptions )
{
default_config = 0; /* --no-options */
opt.no_homedir_creation = 1;
}
else if( pargs.r_opt == oHomedir )
set_homedir ( pargs.r.ret_str );
else if( pargs.r_opt == oNoPermissionWarn )
opt.no_perm_warn=1;
else if (pargs.r_opt == oStrict )
{
/* Not used */
}
else if (pargs.r_opt == oNoStrict )
{
/* Not used */
}
}
#ifdef HAVE_DOSISH_SYSTEM
if ( strchr (opt.homedir,'\\') ) {
char *d, *buf = xmalloc (strlen (opt.homedir)+1);
const char *s = opt.homedir;
for (d=buf,s=opt.homedir; *s; s++)
{
*d++ = *s == '\\'? '/': *s;
#ifdef HAVE_W32_SYSTEM
if (s[1] && IsDBCSLeadByte (*s))
*d++ = *++s;
#endif
}
*d = 0;
set_homedir (buf);
}
#endif
/* Initialize the secure memory. */
if (!gcry_control (GCRYCTL_INIT_SECMEM, 32768, 0))
got_secmem = 1;
#if defined(HAVE_GETUID) && defined(HAVE_GETEUID)
/* There should be no way to get to this spot while still carrying
setuid privs. Just in case, bomb out if we are. */
if ( getuid () != geteuid () )
BUG ();
#endif
maybe_setuid = 0;
/* Okay, we are now working under our real uid */
/* malloc hooks go here ... */
malloc_hooks.malloc = gcry_malloc;
malloc_hooks.realloc = gcry_realloc;
malloc_hooks.free = gcry_free;
assuan_set_malloc_hooks (&malloc_hooks);
assuan_set_gpg_err_source (GPG_ERR_SOURCE_DEFAULT);
setup_libassuan_logging (&opt.debug);
/* Try for a version specific config file first */
default_configname = get_default_configname ();
if (default_config)
configname = xstrdup (default_configname);
argc = orig_argc;
argv = orig_argv;
pargs.argc = &argc;
pargs.argv = &argv;
pargs.flags= ARGPARSE_FLAG_KEEP;
/* By this point we have a homedir, and cannot change it. */
check_permissions(opt.homedir,0);
next_pass:
if( configname ) {
if(check_permissions(configname,1))
{
/* If any options file is unsafe, then disable any external
programs for keyserver calls or photo IDs. Since the
external program to call is set in the options file, a
unsafe options file can lead to an arbitrary program
being run. */
opt.exec_disable=1;
}
configlineno = 0;
configfp = fopen( configname, "r" );
if (configfp && is_secured_file (fileno (configfp)))
{
fclose (configfp);
configfp = NULL;
gpg_err_set_errno (EPERM);
}
if( !configfp ) {
if( default_config ) {
if( parse_debug )
log_info(_("NOTE: no default option file '%s'\n"),
configname );
}
else {
log_error(_("option file '%s': %s\n"),
configname, strerror(errno) );
g10_exit(2);
}
xfree(configname); configname = NULL;
}
if( parse_debug && configname )
log_info(_("reading options from '%s'\n"), configname );
default_config = 0;
}
while( optfile_parse( configfp, configname, &configlineno,
&pargs, opts) )
{
switch( pargs.r_opt )
{
case aCheckKeys:
case aListConfig:
case aGPGConfList:
case aGPGConfTest:
case aListPackets:
case aImport:
case aFastImport:
case aSendKeys:
case aRecvKeys:
case aSearchKeys:
case aRefreshKeys:
case aFetchKeys:
case aExport:
#ifdef ENABLE_CARD_SUPPORT
case aCardStatus:
case aCardEdit:
case aChangePIN:
#endif /* ENABLE_CARD_SUPPORT*/
case aListKeys:
case aLocateKeys:
case aListSigs:
case aExportSecret:
case aExportSecretSub:
case aSym:
case aClearsign:
case aGenRevoke:
case aDesigRevoke:
case aPrimegen:
case aGenRandom:
case aPrintMD:
case aPrintMDs:
case aListTrustDB:
case aCheckTrustDB:
case aUpdateTrustDB:
case aFixTrustDB:
case aListTrustPath:
case aDeArmor:
case aEnArmor:
case aSign:
+ case aQuickSignKey:
+ case aQuickLSignKey:
case aSignKey:
case aLSignKey:
case aStore:
case aExportOwnerTrust:
case aImportOwnerTrust:
case aRebuildKeydbCaches:
set_cmd (&cmd, pargs.r_opt);
break;
case aKeygen:
case aEditKey:
case aDeleteSecretKeys:
case aDeleteSecretAndPublicKeys:
case aDeleteKeys:
case aPasswd:
set_cmd (&cmd, pargs.r_opt);
greeting=1;
break;
case aDetachedSign: detached_sig = 1; set_cmd( &cmd, aSign ); break;
case aDecryptFiles: multifile=1; /* fall through */
case aDecrypt: set_cmd( &cmd, aDecrypt); break;
case aEncrFiles: multifile=1; /* fall through */
case aEncr: set_cmd( &cmd, aEncr); break;
case aVerifyFiles: multifile=1; /* fall through */
case aVerify: set_cmd( &cmd, aVerify); break;
case aServer:
set_cmd (&cmd, pargs.r_opt);
opt.batch = 1;
break;
case oArmor: opt.armor = 1; opt.no_armor=0; break;
case oOutput: opt.outfile = pargs.r.ret_str; break;
case oMaxOutput: opt.max_output = pargs.r.ret_ulong; break;
case oQuiet: opt.quiet = 1; break;
case oNoTTY: tty_no_terminal(1); break;
case oDryRun: opt.dry_run = 1; break;
case oInteractive: opt.interactive = 1; break;
case oVerbose:
opt.verbose++;
gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose);
opt.list_options|=LIST_SHOW_UNUSABLE_UIDS;
opt.list_options|=LIST_SHOW_UNUSABLE_SUBKEYS;
break;
case oBatch:
opt.batch = 1;
nogreeting = 1;
break;
case oUseAgent: /* Dummy. */
break;
case oNoUseAgent:
obsolete_option (configname, configlineno, "--no-use-agent");
break;
case oGpgAgentInfo:
obsolete_option (configname, configlineno, "--gpg-agent-info");
break;
case oAnswerYes: opt.answer_yes = 1; break;
case oAnswerNo: opt.answer_no = 1; break;
case oKeyring: append_to_strlist( &nrings, pargs.r.ret_str); break;
case oPrimaryKeyring:
sl = append_to_strlist (&nrings, pargs.r.ret_str);
sl->flags = KEYDB_RESOURCE_FLAG_PRIMARY;
break;
case oShowKeyring:
deprecated_warning(configname,configlineno,"--show-keyring",
"--list-options ","show-keyring");
opt.list_options|=LIST_SHOW_KEYRING;
break;
case oDebug: opt.debug |= pargs.r.ret_ulong; break;
case oDebugAll: opt.debug = ~0; break;
case oDebugLevel: debug_level = pargs.r.ret_str; break;
case oStatusFD:
set_status_fd ( translate_sys2libc_fd_int (pargs.r.ret_int, 1) );
break;
case oStatusFile:
set_status_fd ( open_info_file (pargs.r.ret_str, 1, 0) );
break;
case oAttributeFD:
set_attrib_fd ( translate_sys2libc_fd_int (pargs.r.ret_int, 1) );
break;
case oAttributeFile:
set_attrib_fd ( open_info_file (pargs.r.ret_str, 1, 1) );
break;
case oLoggerFD:
log_set_fd (translate_sys2libc_fd_int (pargs.r.ret_int, 1));
break;
case oLoggerFile:
logfile = pargs.r.ret_str;
break;
case oWithFingerprint:
opt.with_fingerprint = 1;
opt.fingerprint++;
break;
case oFingerprint:
opt.fingerprint++;
fpr_maybe_cmd = 1;
break;
case oWithKeygrip:
opt.with_keygrip = 1;
break;
case oSecretKeyring:
/* Ignore this old option. */
break;
case oOptions:
/* config files may not be nested (silently ignore them) */
if( !configfp ) {
xfree(configname);
configname = xstrdup(pargs.r.ret_str);
goto next_pass;
}
break;
case oNoArmor: opt.no_armor=1; opt.armor=0; break;
case oNoDefKeyring: default_keyring = 0; break;
case oNoGreeting: nogreeting = 1; break;
case oNoVerbose:
opt.verbose = 0;
gcry_control (GCRYCTL_SET_VERBOSITY, (int)opt.verbose);
opt.list_sigs=0;
break;
case oQuickRandom:
gcry_control (GCRYCTL_ENABLE_QUICK_RANDOM, 0);
break;
case oEmitVersion: opt.emit_version++; break;
case oNoEmitVersion: opt.emit_version=0; break;
case oCompletesNeeded: opt.completes_needed = pargs.r.ret_int; break;
case oMarginalsNeeded: opt.marginals_needed = pargs.r.ret_int; break;
case oMaxCertDepth: opt.max_cert_depth = pargs.r.ret_int; break;
#ifndef NO_TRUST_MODELS
case oTrustDBName: trustdb_name = pargs.r.ret_str; break;
#endif /*!NO_TRUST_MODELS*/
case oDefaultKey: opt.def_secret_key = pargs.r.ret_str; break;
case oDefRecipient:
if( *pargs.r.ret_str )
opt.def_recipient = make_username(pargs.r.ret_str);
break;
case oDefRecipientSelf:
xfree(opt.def_recipient); opt.def_recipient = NULL;
opt.def_recipient_self = 1;
break;
case oNoDefRecipient:
xfree(opt.def_recipient); opt.def_recipient = NULL;
opt.def_recipient_self = 0;
break;
case oNoOptions: opt.no_homedir_creation = 1; break; /* no-options */
case oHomedir: break;
case oNoBatch: opt.batch = 0; break;
case oWithKeyData: opt.with_key_data=1; /*FALLTHRU*/
case oWithColons: opt.with_colons=':'; break;
case oWithSigCheck: opt.check_sigs = 1; /*FALLTHRU*/
case oWithSigList: opt.list_sigs = 1; break;
case oSkipVerify: opt.skip_verify=1; break;
case oSkipHiddenRecipients: opt.skip_hidden_recipients = 1; break;
case oNoSkipHiddenRecipients: opt.skip_hidden_recipients = 0; break;
case oCompressKeys: opt.compress_keys = 1; break;
case aListSecretKeys: set_cmd( &cmd, aListSecretKeys); break;
#ifndef NO_TRUST_MODELS
/* There are many programs (like mutt) that call gpg with
--always-trust so keep this option around for a long
time. */
case oAlwaysTrust: opt.trust_model=TM_ALWAYS; break;
case oTrustModel:
parse_trust_model(pargs.r.ret_str);
break;
#endif /*!NO_TRUST_MODELS*/
case oForceOwnertrust:
log_info(_("NOTE: %s is not for normal use!\n"),
"--force-ownertrust");
opt.force_ownertrust=string_to_trust_value(pargs.r.ret_str);
if(opt.force_ownertrust==-1)
{
log_error("invalid ownertrust '%s'\n",pargs.r.ret_str);
opt.force_ownertrust=0;
}
break;
case oLoadExtension:
/* Dummy so that gpg 1.4 conf files can work. Should
eventually be removed. */
break;
case oRFC1991:
opt.compliance = CO_RFC1991;
opt.force_v4_certs = 0;
opt.escape_from = 1;
break;
case oOpenPGP:
case oRFC4880:
/* This is effectively the same as RFC2440, but with
"--enable-dsa2 --no-rfc2440-text --escape-from-lines
--require-cross-certification". */
opt.compliance = CO_RFC4880;
opt.flags.dsa2 = 1;
opt.flags.require_cross_cert = 1;
opt.rfc2440_text = 0;
opt.allow_non_selfsigned_uid = 1;
opt.allow_freeform_uid = 1;
opt.pgp2_workarounds = 0;
opt.escape_from = 1;
opt.force_v3_sigs = 0;
opt.compress_keys = 0; /* not mandated, but we do it */
opt.compress_sigs = 0; /* ditto. */
opt.not_dash_escaped = 0;
opt.def_cipher_algo = 0;
opt.def_digest_algo = 0;
opt.cert_digest_algo = 0;
opt.compress_algo = -1;
opt.s2k_mode = 3; /* iterated+salted */
opt.s2k_digest_algo = DIGEST_ALGO_SHA1;
opt.s2k_cipher_algo = CIPHER_ALGO_3DES;
break;
case oRFC2440:
opt.compliance = CO_RFC2440;
opt.flags.dsa2 = 0;
opt.rfc2440_text = 1;
opt.allow_non_selfsigned_uid = 1;
opt.allow_freeform_uid = 1;
opt.pgp2_workarounds = 0;
opt.escape_from = 0;
opt.force_v3_sigs = 0;
opt.compress_keys = 0; /* not mandated, but we do it */
opt.compress_sigs = 0; /* ditto. */
opt.not_dash_escaped = 0;
opt.def_cipher_algo = 0;
opt.def_digest_algo = 0;
opt.cert_digest_algo = 0;
opt.compress_algo = -1;
opt.s2k_mode = 3; /* iterated+salted */
opt.s2k_digest_algo = DIGEST_ALGO_SHA1;
opt.s2k_cipher_algo = CIPHER_ALGO_3DES;
break;
case oPGP2: opt.compliance = CO_PGP2; break;
case oPGP6: opt.compliance = CO_PGP6; break;
case oPGP7: opt.compliance = CO_PGP7; break;
case oPGP8: opt.compliance = CO_PGP8; break;
case oGnuPG: opt.compliance = CO_GNUPG; break;
case oCompressSigs: opt.compress_sigs = 1; break;
case oRFC2440Text: opt.rfc2440_text=1; break;
case oNoRFC2440Text: opt.rfc2440_text=0; break;
case oSetFilename:
if(utf8_strings)
opt.set_filename = pargs.r.ret_str;
else
opt.set_filename = native_to_utf8(pargs.r.ret_str);
break;
case oForYourEyesOnly: eyes_only = 1; break;
case oNoForYourEyesOnly: eyes_only = 0; break;
case oSetPolicyURL:
add_policy_url(pargs.r.ret_str,0);
add_policy_url(pargs.r.ret_str,1);
break;
case oSigPolicyURL: add_policy_url(pargs.r.ret_str,0); break;
case oCertPolicyURL: add_policy_url(pargs.r.ret_str,1); break;
case oShowPolicyURL:
deprecated_warning(configname,configlineno,"--show-policy-url",
"--list-options ","show-policy-urls");
deprecated_warning(configname,configlineno,"--show-policy-url",
"--verify-options ","show-policy-urls");
opt.list_options|=LIST_SHOW_POLICY_URLS;
opt.verify_options|=VERIFY_SHOW_POLICY_URLS;
break;
case oNoShowPolicyURL:
deprecated_warning(configname,configlineno,"--no-show-policy-url",
"--list-options ","no-show-policy-urls");
deprecated_warning(configname,configlineno,"--no-show-policy-url",
"--verify-options ","no-show-policy-urls");
opt.list_options&=~LIST_SHOW_POLICY_URLS;
opt.verify_options&=~VERIFY_SHOW_POLICY_URLS;
break;
case oSigKeyserverURL: add_keyserver_url(pargs.r.ret_str,0); break;
case oUseEmbeddedFilename:
opt.flags.use_embedded_filename=1;
break;
case oNoUseEmbeddedFilename:
opt.flags.use_embedded_filename=0;
break;
case oComment:
if(pargs.r.ret_str[0])
append_to_strlist(&opt.comments,pargs.r.ret_str);
break;
case oDefaultComment:
deprecated_warning(configname,configlineno,
"--default-comment","--no-comments","");
/* fall through */
case oNoComments:
free_strlist(opt.comments);
opt.comments=NULL;
break;
case oThrowKeyids: opt.throw_keyid = 1; break;
case oNoThrowKeyids: opt.throw_keyid = 0; break;
case oShowPhotos:
deprecated_warning(configname,configlineno,"--show-photos",
"--list-options ","show-photos");
deprecated_warning(configname,configlineno,"--show-photos",
"--verify-options ","show-photos");
opt.list_options|=LIST_SHOW_PHOTOS;
opt.verify_options|=VERIFY_SHOW_PHOTOS;
break;
case oNoShowPhotos:
deprecated_warning(configname,configlineno,"--no-show-photos",
"--list-options ","no-show-photos");
deprecated_warning(configname,configlineno,"--no-show-photos",
"--verify-options ","no-show-photos");
opt.list_options&=~LIST_SHOW_PHOTOS;
opt.verify_options&=~VERIFY_SHOW_PHOTOS;
break;
case oPhotoViewer: opt.photo_viewer = pargs.r.ret_str; break;
case oForceV3Sigs: opt.force_v3_sigs = 1; break;
case oNoForceV3Sigs: opt.force_v3_sigs = 0; break;
case oForceV4Certs: opt.force_v4_certs = 1; break;
case oNoForceV4Certs: opt.force_v4_certs = 0; break;
case oForceMDC: opt.force_mdc = 1; break;
case oNoForceMDC: opt.force_mdc = 0; break;
case oDisableMDC: opt.disable_mdc = 1; break;
case oNoDisableMDC: opt.disable_mdc = 0; break;
case oS2KMode: opt.s2k_mode = pargs.r.ret_int; break;
case oS2KDigest: s2k_digest_string = xstrdup(pargs.r.ret_str); break;
case oS2KCipher: s2k_cipher_string = xstrdup(pargs.r.ret_str); break;
case oS2KCount:
if (pargs.r.ret_int)
opt.s2k_count = encode_s2k_iterations (pargs.r.ret_int);
else
opt.s2k_count = 0; /* Auto-calibrate when needed. */
break;
case oNoEncryptTo: opt.no_encrypt_to = 1; break;
case oEncryptTo: /* store the recipient in the second list */
sl = add_to_strlist2( &remusr, pargs.r.ret_str, utf8_strings );
sl->flags = 1;
break;
case oHiddenEncryptTo: /* store the recipient in the second list */
sl = add_to_strlist2( &remusr, pargs.r.ret_str, utf8_strings );
sl->flags = 1|2;
break;
case oRecipient: /* store the recipient */
add_to_strlist2( &remusr, pargs.r.ret_str, utf8_strings );
any_explicit_recipient = 1;
break;
case oHiddenRecipient: /* store the recipient with a flag */
sl = add_to_strlist2( &remusr, pargs.r.ret_str, utf8_strings );
sl->flags = 2;
any_explicit_recipient = 1;
break;
case oTrySecretKey:
add_to_strlist2 (&opt.secret_keys_to_try,
pargs.r.ret_str, utf8_strings);
break;
case oTextmodeShort: opt.textmode = 2; break;
case oTextmode: opt.textmode=1; break;
case oNoTextmode: opt.textmode=0; break;
case oExpert: opt.expert = 1; break;
case oNoExpert: opt.expert = 0; break;
case oDefSigExpire:
if(*pargs.r.ret_str!='\0')
{
if(parse_expire_string(pargs.r.ret_str)==(u32)-1)
log_error(_("'%s' is not a valid signature expiration\n"),
pargs.r.ret_str);
else
opt.def_sig_expire=pargs.r.ret_str;
}
break;
case oAskSigExpire: opt.ask_sig_expire = 1; break;
case oNoAskSigExpire: opt.ask_sig_expire = 0; break;
case oDefCertExpire:
if(*pargs.r.ret_str!='\0')
{
if(parse_expire_string(pargs.r.ret_str)==(u32)-1)
log_error(_("'%s' is not a valid signature expiration\n"),
pargs.r.ret_str);
else
opt.def_cert_expire=pargs.r.ret_str;
}
break;
case oAskCertExpire: opt.ask_cert_expire = 1; break;
case oNoAskCertExpire: opt.ask_cert_expire = 0; break;
case oDefCertLevel: opt.def_cert_level=pargs.r.ret_int; break;
case oMinCertLevel: opt.min_cert_level=pargs.r.ret_int; break;
case oAskCertLevel: opt.ask_cert_level = 1; break;
case oNoAskCertLevel: opt.ask_cert_level = 0; break;
case oLocalUser: /* store the local users */
add_to_strlist2( &locusr, pargs.r.ret_str, utf8_strings );
break;
case oCompress:
/* this is the -z command line option */
opt.compress_level = opt.bz2_compress_level = pargs.r.ret_int;
break;
case oCompressLevel: opt.compress_level = pargs.r.ret_int; break;
case oBZ2CompressLevel: opt.bz2_compress_level = pargs.r.ret_int; break;
case oBZ2DecompressLowmem: opt.bz2_decompress_lowmem=1; break;
case oPassphrase:
set_passphrase_from_string(pargs.r.ret_str);
break;
case oPassphraseFD:
pwfd = translate_sys2libc_fd_int (pargs.r.ret_int, 0);
break;
case oPassphraseFile:
pwfd = open_info_file (pargs.r.ret_str, 0, 1);
break;
case oPassphraseRepeat:
opt.passphrase_repeat = pargs.r.ret_int;
break;
case oPinentryMode:
opt.pinentry_mode = parse_pinentry_mode (pargs.r.ret_str);
if (opt.pinentry_mode == -1)
log_error (_("invalid pinentry mode '%s'\n"), pargs.r.ret_str);
break;
case oCommandFD:
opt.command_fd = translate_sys2libc_fd_int (pargs.r.ret_int, 0);
break;
case oCommandFile:
opt.command_fd = open_info_file (pargs.r.ret_str, 0, 1);
break;
case oCipherAlgo:
def_cipher_string = xstrdup(pargs.r.ret_str);
break;
case oDigestAlgo:
def_digest_string = xstrdup(pargs.r.ret_str);
break;
case oCompressAlgo:
/* If it is all digits, stick a Z in front of it for
later. This is for backwards compatibility with
versions that took the compress algorithm number. */
{
char *pt=pargs.r.ret_str;
while(*pt)
{
if (!isascii (*pt) || !isdigit (*pt))
break;
pt++;
}
if(*pt=='\0')
{
compress_algo_string=xmalloc(strlen(pargs.r.ret_str)+2);
strcpy(compress_algo_string,"Z");
strcat(compress_algo_string,pargs.r.ret_str);
}
else
compress_algo_string = xstrdup(pargs.r.ret_str);
}
break;
case oCertDigestAlgo:
cert_digest_string = xstrdup(pargs.r.ret_str);
break;
case oNoSecmemWarn:
gcry_control (GCRYCTL_DISABLE_SECMEM_WARN);
break;
case oRequireSecmem: require_secmem=1; break;
case oNoRequireSecmem: require_secmem=0; break;
case oNoPermissionWarn: opt.no_perm_warn=1; break;
case oNoMDCWarn: opt.no_mdc_warn=1; break;
case oDisplayCharset:
if( set_native_charset( pargs.r.ret_str ) )
log_error(_("'%s' is not a valid character set\n"),
pargs.r.ret_str);
break;
case oNotDashEscaped: opt.not_dash_escaped = 1; break;
case oEscapeFrom: opt.escape_from = 1; break;
case oNoEscapeFrom: opt.escape_from = 0; break;
case oLockOnce: opt.lock_once = 1; break;
case oLockNever:
dotlock_disable ();
break;
case oLockMultiple:
#ifndef __riscos__
opt.lock_once = 0;
#else /* __riscos__ */
riscos_not_implemented("lock-multiple");
#endif /* __riscos__ */
break;
case oKeyServer:
{
keyserver_spec_t keyserver;
keyserver = parse_keyserver_uri (pargs.r.ret_str,0,
configname,configlineno);
if (!keyserver)
log_error (_("could not parse keyserver URL\n"));
else
{
keyserver->next = opt.keyserver;
opt.keyserver = keyserver;
}
}
break;
case oKeyServerOptions:
if(!parse_keyserver_options(pargs.r.ret_str))
{
if(configname)
log_error(_("%s:%d: invalid keyserver options\n"),
configname,configlineno);
else
log_error(_("invalid keyserver options\n"));
}
break;
case oImportOptions:
if(!parse_import_options(pargs.r.ret_str,&opt.import_options,1))
{
if(configname)
log_error(_("%s:%d: invalid import options\n"),
configname,configlineno);
else
log_error(_("invalid import options\n"));
}
break;
case oExportOptions:
if(!parse_export_options(pargs.r.ret_str,&opt.export_options,1))
{
if(configname)
log_error(_("%s:%d: invalid export options\n"),
configname,configlineno);
else
log_error(_("invalid export options\n"));
}
break;
case oListOptions:
if(!parse_list_options(pargs.r.ret_str))
{
if(configname)
log_error(_("%s:%d: invalid list options\n"),
configname,configlineno);
else
log_error(_("invalid list options\n"));
}
break;
case oVerifyOptions:
{
struct parse_options vopts[]=
{
{"show-photos",VERIFY_SHOW_PHOTOS,NULL,
N_("display photo IDs during signature verification")},
{"show-policy-urls",VERIFY_SHOW_POLICY_URLS,NULL,
N_("show policy URLs during signature verification")},
{"show-notations",VERIFY_SHOW_NOTATIONS,NULL,
N_("show all notations during signature verification")},
{"show-std-notations",VERIFY_SHOW_STD_NOTATIONS,NULL,
N_("show IETF standard notations during signature verification")},
{"show-standard-notations",VERIFY_SHOW_STD_NOTATIONS,NULL,
NULL},
{"show-user-notations",VERIFY_SHOW_USER_NOTATIONS,NULL,
N_("show user-supplied notations during signature verification")},
{"show-keyserver-urls",VERIFY_SHOW_KEYSERVER_URLS,NULL,
N_("show preferred keyserver URLs during signature verification")},
{"show-uid-validity",VERIFY_SHOW_UID_VALIDITY,NULL,
N_("show user ID validity during signature verification")},
{"show-unusable-uids",VERIFY_SHOW_UNUSABLE_UIDS,NULL,
N_("show revoked and expired user IDs in signature verification")},
{"show-primary-uid-only",VERIFY_SHOW_PRIMARY_UID_ONLY,NULL,
N_("show only the primary user ID in signature verification")},
{"pka-lookups",VERIFY_PKA_LOOKUPS,NULL,
N_("validate signatures with PKA data")},
{"pka-trust-increase",VERIFY_PKA_TRUST_INCREASE,NULL,
N_("elevate the trust of signatures with valid PKA data")},
{NULL,0,NULL,NULL}
};
if(!parse_options(pargs.r.ret_str,&opt.verify_options,vopts,1))
{
if(configname)
log_error(_("%s:%d: invalid verify options\n"),
configname,configlineno);
else
log_error(_("invalid verify options\n"));
}
}
break;
case oTempDir: opt.temp_dir=pargs.r.ret_str; break;
case oExecPath:
if(set_exec_path(pargs.r.ret_str))
log_error(_("unable to set exec-path to %s\n"),pargs.r.ret_str);
else
opt.exec_path_set=1;
break;
case oSetNotation:
add_notation_data( pargs.r.ret_str, 0 );
add_notation_data( pargs.r.ret_str, 1 );
break;
case oSigNotation: add_notation_data( pargs.r.ret_str, 0 ); break;
case oCertNotation: add_notation_data( pargs.r.ret_str, 1 ); break;
case oShowNotation:
deprecated_warning(configname,configlineno,"--show-notation",
"--list-options ","show-notations");
deprecated_warning(configname,configlineno,"--show-notation",
"--verify-options ","show-notations");
opt.list_options|=LIST_SHOW_NOTATIONS;
opt.verify_options|=VERIFY_SHOW_NOTATIONS;
break;
case oNoShowNotation:
deprecated_warning(configname,configlineno,"--no-show-notation",
"--list-options ","no-show-notations");
deprecated_warning(configname,configlineno,"--no-show-notation",
"--verify-options ","no-show-notations");
opt.list_options&=~LIST_SHOW_NOTATIONS;
opt.verify_options&=~VERIFY_SHOW_NOTATIONS;
break;
case oUtf8Strings: utf8_strings = 1; break;
case oNoUtf8Strings: utf8_strings = 0; break;
case oDisableCipherAlgo:
{
int algo = string_to_cipher_algo (pargs.r.ret_str);
gcry_cipher_ctl (NULL, GCRYCTL_DISABLE_ALGO, &algo, sizeof algo);
}
break;
case oDisablePubkeyAlgo:
{
int algo = gcry_pk_map_name (pargs.r.ret_str);
gcry_pk_ctl (GCRYCTL_DISABLE_ALGO, &algo, sizeof algo);
}
break;
case oNoSigCache: opt.no_sig_cache = 1; break;
case oNoSigCreateCheck: opt.no_sig_create_check = 1; break;
case oAllowNonSelfsignedUID: opt.allow_non_selfsigned_uid = 1; break;
case oNoAllowNonSelfsignedUID: opt.allow_non_selfsigned_uid=0; break;
case oAllowFreeformUID: opt.allow_freeform_uid = 1; break;
case oNoAllowFreeformUID: opt.allow_freeform_uid = 0; break;
case oNoLiteral: opt.no_literal = 1; break;
case oSetFilesize: opt.set_filesize = pargs.r.ret_ulong; break;
case oHonorHttpProxy:
add_to_strlist(&opt.keyserver_options.other,"http-proxy");
deprecated_warning(configname,configlineno,
"--honor-http-proxy",
"--keyserver-options ","http-proxy");
break;
case oFastListMode: opt.fast_list_mode = 1; break;
case oFixedListMode: /* Dummy */ break;
case oLegacyListMode: opt.legacy_list_mode = 1; break;
case oListOnly: opt.list_only=1; break;
case oIgnoreTimeConflict: opt.ignore_time_conflict = 1; break;
case oIgnoreValidFrom: opt.ignore_valid_from = 1; break;
case oIgnoreCrcError: opt.ignore_crc_error = 1; break;
case oIgnoreMDCError: opt.ignore_mdc_error = 1; break;
case oNoRandomSeedFile: use_random_seed = 0; break;
case oAutoKeyRetrieve:
case oNoAutoKeyRetrieve:
if(pargs.r_opt==oAutoKeyRetrieve)
opt.keyserver_options.options|=KEYSERVER_AUTO_KEY_RETRIEVE;
else
opt.keyserver_options.options&=~KEYSERVER_AUTO_KEY_RETRIEVE;
deprecated_warning(configname,configlineno,
pargs.r_opt==oAutoKeyRetrieve?"--auto-key-retrieve":
"--no-auto-key-retrieve","--keyserver-options ",
pargs.r_opt==oAutoKeyRetrieve?"auto-key-retrieve":
"no-auto-key-retrieve");
break;
case oShowSessionKey: opt.show_session_key = 1; break;
case oOverrideSessionKey:
opt.override_session_key = pargs.r.ret_str;
break;
case oMergeOnly:
deprecated_warning(configname,configlineno,"--merge-only",
"--import-options ","merge-only");
opt.import_options|=IMPORT_MERGE_ONLY;
break;
case oAllowSecretKeyImport: /* obsolete */ break;
case oTryAllSecrets: opt.try_all_secrets = 1; break;
case oTrustedKey: register_trusted_key( pargs.r.ret_str ); break;
case oEnableSpecialFilenames:
iobuf_enable_special_filenames (1);
break;
case oNoExpensiveTrustChecks: opt.no_expensive_trust_checks=1; break;
case oAutoCheckTrustDB: opt.no_auto_check_trustdb=0; break;
case oNoAutoCheckTrustDB: opt.no_auto_check_trustdb=1; break;
case oPreservePermissions: opt.preserve_permissions=1; break;
case oDefaultPreferenceList:
opt.def_preference_list = pargs.r.ret_str;
break;
case oDefaultKeyserverURL:
{
keyserver_spec_t keyserver;
keyserver = parse_keyserver_uri (pargs.r.ret_str,1,
configname,configlineno);
if (!keyserver)
log_error (_("could not parse keyserver URL\n"));
else
free_keyserver_spec (keyserver);
opt.def_keyserver_url = pargs.r.ret_str;
}
break;
case oPersonalCipherPreferences:
pers_cipher_list=pargs.r.ret_str;
break;
case oPersonalDigestPreferences:
pers_digest_list=pargs.r.ret_str;
break;
case oPersonalCompressPreferences:
pers_compress_list=pargs.r.ret_str;
break;
case oAgentProgram: opt.agent_program = pargs.r.ret_str; break;
case oDirmngrProgram: opt.dirmngr_program = pargs.r.ret_str; break;
case oDisplay:
set_opt_session_env ("DISPLAY", pargs.r.ret_str);
break;
case oTTYname:
set_opt_session_env ("GPG_TTY", pargs.r.ret_str);
break;
case oTTYtype:
set_opt_session_env ("TERM", pargs.r.ret_str);
break;
case oXauthority:
set_opt_session_env ("XAUTHORITY", pargs.r.ret_str);
break;
case oLCctype: opt.lc_ctype = pargs.r.ret_str; break;
case oLCmessages: opt.lc_messages = pargs.r.ret_str; break;
case oGroup: add_group(pargs.r.ret_str); break;
case oUnGroup: rm_group(pargs.r.ret_str); break;
case oNoGroups:
while(opt.grouplist)
{
struct groupitem *iter=opt.grouplist;
free_strlist(iter->values);
opt.grouplist=opt.grouplist->next;
xfree(iter);
}
break;
case oStrict:
case oNoStrict:
/* Not used */
break;
case oMangleDosFilenames: opt.mangle_dos_filenames = 1; break;
case oNoMangleDosFilenames: opt.mangle_dos_filenames = 0; break;
case oEnableProgressFilter: opt.enable_progress_filter = 1; break;
case oMultifile: multifile=1; break;
case oKeyidFormat:
if(ascii_strcasecmp(pargs.r.ret_str,"short")==0)
opt.keyid_format=KF_SHORT;
else if(ascii_strcasecmp(pargs.r.ret_str,"long")==0)
opt.keyid_format=KF_LONG;
else if(ascii_strcasecmp(pargs.r.ret_str,"0xshort")==0)
opt.keyid_format=KF_0xSHORT;
else if(ascii_strcasecmp(pargs.r.ret_str,"0xlong")==0)
opt.keyid_format=KF_0xLONG;
else
log_error("unknown keyid-format '%s'\n",pargs.r.ret_str);
break;
case oExitOnStatusWriteError:
opt.exit_on_status_write_error = 1;
break;
case oLimitCardInsertTries:
opt.limit_card_insert_tries = pargs.r.ret_int;
break;
case oRequireCrossCert: opt.flags.require_cross_cert=1; break;
case oNoRequireCrossCert: opt.flags.require_cross_cert=0; break;
case oAutoKeyLocate:
if(!parse_auto_key_locate(pargs.r.ret_str))
{
if(configname)
log_error(_("%s:%d: invalid auto-key-locate list\n"),
configname,configlineno);
else
log_error(_("invalid auto-key-locate list\n"));
}
break;
case oNoAutoKeyLocate:
release_akl();
break;
case oEnableDSA2: opt.flags.dsa2=1; break;
case oDisableDSA2: opt.flags.dsa2=0; break;
case oAllowMultisigVerification:
case oAllowMultipleMessages:
opt.flags.allow_multiple_messages=1;
break;
case oNoAllowMultipleMessages:
opt.flags.allow_multiple_messages=0;
break;
case oAllowWeakDigestAlgos:
opt.flags.allow_weak_digest_algos = 1;
break;
case oFakedSystemTime:
{
time_t faked_time = isotime2epoch (pargs.r.ret_str);
if (faked_time == (time_t)(-1))
faked_time = (time_t)strtoul (pargs.r.ret_str, NULL, 10);
gnupg_set_time (faked_time, 0);
}
break;
case oNoop: break;
default:
pargs.err = configfp? ARGPARSE_PRINT_WARNING:ARGPARSE_PRINT_ERROR;
break;
}
}
if (configfp)
{
fclose( configfp );
configfp = NULL;
/* Remember the first config file name. */
if (!save_configname)
save_configname = configname;
else
xfree(configname);
configname = NULL;
goto next_pass;
}
xfree(configname); configname = NULL;
if (log_get_errorcount (0))
g10_exit(2);
/* The command --gpgconf-list is pretty simple and may be called
directly after the option parsing. */
if (cmd == aGPGConfList)
{
gpgconf_list (save_configname ? save_configname : default_configname);
g10_exit (0);
}
xfree (save_configname);
xfree (default_configname);
if( nogreeting )
greeting = 0;
if( greeting )
{
es_fprintf (es_stderr, "%s %s; %s\n",
strusage(11), strusage(13), strusage(14) );
es_fprintf (es_stderr, "%s\n", strusage(15) );
}
#ifdef IS_DEVELOPMENT_VERSION
if (!opt.batch)
{
const char *s;
if((s=strusage(25)))
log_info("%s\n",s);
if((s=strusage(26)))
log_info("%s\n",s);
if((s=strusage(27)))
log_info("%s\n",s);
}
#endif
/* FIXME: We should use logging to a file only in server mode;
however we have not yet implemetyed that. Thus we try to get
away with --batch as indication for logging to file
required. */
if (logfile && opt.batch)
{
log_set_file (logfile);
log_set_prefix (NULL, 1|2|4);
}
/* Older Libgcrypts fail with an assertion during DSA key
generation. Better disable DSA2 entirely. */
if (opt.flags.dsa2 && !gcry_check_version ("1.4.0") )
{
log_info ("WARNING: "
"DSA2 is only available with Libgcrypt 1.4 and later\n");
opt.flags.dsa2 = 0;
}
if (opt.verbose > 2)
log_info ("using character set '%s'\n", get_native_charset ());
if( may_coredump && !opt.quiet )
log_info(_("WARNING: program may create a core file!\n"));
if (eyes_only) {
if (opt.set_filename)
log_info(_("WARNING: %s overrides %s\n"),
"--for-your-eyes-only","--set-filename");
opt.set_filename="_CONSOLE";
}
if (opt.no_literal) {
log_info(_("NOTE: %s is not for normal use!\n"), "--no-literal");
if (opt.textmode)
log_error(_("%s not allowed with %s!\n"),
"--textmode", "--no-literal" );
if (opt.set_filename)
log_error(_("%s makes no sense with %s!\n"),
eyes_only?"--for-your-eyes-only":"--set-filename",
"--no-literal" );
}
if (opt.set_filesize)
log_info(_("NOTE: %s is not for normal use!\n"), "--set-filesize");
if( opt.batch )
tty_batchmode( 1 );
if (gnupg_faked_time_p ())
{
gnupg_isotime_t tbuf;
log_info (_("WARNING: running with faked system time: "));
gnupg_get_isotime (tbuf);
dump_isotime (tbuf);
log_printf ("\n");
}
/* Print a warning if an argument looks like an option. */
if (!opt.quiet && !(pargs.flags & ARGPARSE_FLAG_STOP_SEEN))
{
int i;
for (i=0; i < argc; i++)
if (argv[i][0] == '-' && argv[i][1] == '-')
log_info (_("NOTE: '%s' is not considered an option\n"), argv[i]);
}
gcry_control (GCRYCTL_RESUME_SECMEM_WARN);
if(require_secmem && !got_secmem)
{
log_info(_("will not run with insecure memory due to %s\n"),
"--require-secmem");
g10_exit(2);
}
set_debug (debug_level);
if (DBG_CLOCK)
log_clock ("start");
/* Do these after the switch(), so they can override settings. */
if(PGP2)
{
int unusable=0;
if(cmd==aSign && !detached_sig)
{
log_info(_("you can only make detached or clear signatures "
"while in --pgp2 mode\n"));
unusable=1;
}
else if(cmd==aSignEncr || cmd==aSignSym)
{
log_info(_("you can't sign and encrypt at the "
"same time while in --pgp2 mode\n"));
unusable=1;
}
else if(argc==0 && (cmd==aSign || cmd==aEncr || cmd==aSym))
{
log_info(_("you must use files (and not a pipe) when "
"working with --pgp2 enabled.\n"));
unusable=1;
}
else if(cmd==aEncr || cmd==aSym)
{
/* Everything else should work without IDEA (except using
a secret key encrypted with IDEA and setting an IDEA
preference, but those have their own error
messages). */
if (openpgp_cipher_test_algo(CIPHER_ALGO_IDEA))
{
log_info(_("encrypting a message in --pgp2 mode requires "
"the IDEA cipher\n"));
unusable=1;
}
else if(cmd==aSym)
{
/* This only sets IDEA for symmetric encryption
since it is set via select_algo_from_prefs for
pk encryption. */
xfree(def_cipher_string);
def_cipher_string = xstrdup("idea");
}
/* PGP2 can't handle the output from the textmode
filter, so we disable it for anything that could
create a literal packet (only encryption and
symmetric encryption, since we disable signing
above). */
if(!unusable)
opt.textmode=0;
}
if(unusable)
compliance_failure();
else
{
opt.force_v4_certs = 0;
opt.escape_from = 1;
opt.force_v3_sigs = 1;
opt.pgp2_workarounds = 1;
opt.ask_sig_expire = 0;
opt.ask_cert_expire = 0;
opt.flags.allow_weak_digest_algos = 1;
xfree(def_digest_string);
def_digest_string = xstrdup("md5");
xfree(s2k_digest_string);
s2k_digest_string = xstrdup("md5");
opt.compress_algo = COMPRESS_ALGO_ZIP;
}
}
else if(PGP6)
{
opt.disable_mdc=1;
opt.escape_from=1;
opt.force_v3_sigs=1;
opt.ask_sig_expire=0;
}
else if(PGP7)
{
opt.escape_from=1;
opt.force_v3_sigs=1;
opt.ask_sig_expire=0;
}
else if(PGP8)
{
opt.escape_from=1;
}
if( def_cipher_string ) {
opt.def_cipher_algo = string_to_cipher_algo (def_cipher_string);
xfree(def_cipher_string); def_cipher_string = NULL;
if ( openpgp_cipher_test_algo (opt.def_cipher_algo) )
log_error(_("selected cipher algorithm is invalid\n"));
}
if( def_digest_string ) {
opt.def_digest_algo = string_to_digest_algo (def_digest_string);
xfree(def_digest_string); def_digest_string = NULL;
if ( openpgp_md_test_algo (opt.def_digest_algo) )
log_error(_("selected digest algorithm is invalid\n"));
}
if( compress_algo_string ) {
opt.compress_algo = string_to_compress_algo(compress_algo_string);
xfree(compress_algo_string); compress_algo_string = NULL;
if( check_compress_algo(opt.compress_algo) )
log_error(_("selected compression algorithm is invalid\n"));
}
if( cert_digest_string ) {
opt.cert_digest_algo = string_to_digest_algo (cert_digest_string);
xfree(cert_digest_string); cert_digest_string = NULL;
if (openpgp_md_test_algo(opt.cert_digest_algo))
log_error(_("selected certification digest algorithm is invalid\n"));
}
if( s2k_cipher_string ) {
opt.s2k_cipher_algo = string_to_cipher_algo (s2k_cipher_string);
xfree(s2k_cipher_string); s2k_cipher_string = NULL;
if (openpgp_cipher_test_algo (opt.s2k_cipher_algo))
log_error(_("selected cipher algorithm is invalid\n"));
}
if( s2k_digest_string ) {
opt.s2k_digest_algo = string_to_digest_algo (s2k_digest_string);
xfree(s2k_digest_string); s2k_digest_string = NULL;
if (openpgp_md_test_algo(opt.s2k_digest_algo))
log_error(_("selected digest algorithm is invalid\n"));
}
if( opt.completes_needed < 1 )
log_error(_("completes-needed must be greater than 0\n"));
if( opt.marginals_needed < 2 )
log_error(_("marginals-needed must be greater than 1\n"));
if( opt.max_cert_depth < 1 || opt.max_cert_depth > 255 )
log_error(_("max-cert-depth must be in the range from 1 to 255\n"));
if(opt.def_cert_level<0 || opt.def_cert_level>3)
log_error(_("invalid default-cert-level; must be 0, 1, 2, or 3\n"));
if( opt.min_cert_level < 1 || opt.min_cert_level > 3 )
log_error(_("invalid min-cert-level; must be 1, 2, or 3\n"));
switch( opt.s2k_mode ) {
case 0:
log_info(_("NOTE: simple S2K mode (0) is strongly discouraged\n"));
break;
case 1: case 3: break;
default:
log_error(_("invalid S2K mode; must be 0, 1 or 3\n"));
}
/* This isn't actually needed, but does serve to error out if the
string is invalid. */
if(opt.def_preference_list &&
keygen_set_std_prefs(opt.def_preference_list,0))
log_error(_("invalid default preferences\n"));
if(pers_cipher_list &&
keygen_set_std_prefs(pers_cipher_list,PREFTYPE_SYM))
log_error(_("invalid personal cipher preferences\n"));
if(pers_digest_list &&
keygen_set_std_prefs(pers_digest_list,PREFTYPE_HASH))
log_error(_("invalid personal digest preferences\n"));
if(pers_compress_list &&
keygen_set_std_prefs(pers_compress_list,PREFTYPE_ZIP))
log_error(_("invalid personal compress preferences\n"));
/* We don't support all possible commands with multifile yet */
if(multifile)
{
char *cmdname;
switch(cmd)
{
case aSign:
cmdname="--sign";
break;
case aClearsign:
cmdname="--clearsign";
break;
case aDetachedSign:
cmdname="--detach-sign";
break;
case aSym:
cmdname="--symmetric";
break;
case aEncrSym:
cmdname="--symmetric --encrypt";
break;
case aStore:
cmdname="--store";
break;
default:
cmdname=NULL;
break;
}
if(cmdname)
log_error(_("%s does not yet work with %s\n"),cmdname,"--multifile");
}
if( log_get_errorcount(0) )
g10_exit(2);
if(opt.compress_level==0)
opt.compress_algo=COMPRESS_ALGO_NONE;
/* Check our chosen algorithms against the list of legal
algorithms. */
if(!GNUPG)
{
const char *badalg=NULL;
preftype_t badtype=PREFTYPE_NONE;
if(opt.def_cipher_algo
&& !algo_available(PREFTYPE_SYM,opt.def_cipher_algo,NULL))
{
badalg = openpgp_cipher_algo_name (opt.def_cipher_algo);
badtype = PREFTYPE_SYM;
}
else if(opt.def_digest_algo
&& !algo_available(PREFTYPE_HASH,opt.def_digest_algo,NULL))
{
badalg = gcry_md_algo_name (opt.def_digest_algo);
badtype = PREFTYPE_HASH;
}
else if(opt.cert_digest_algo
&& !algo_available(PREFTYPE_HASH,opt.cert_digest_algo,NULL))
{
badalg = gcry_md_algo_name (opt.cert_digest_algo);
badtype = PREFTYPE_HASH;
}
else if(opt.compress_algo!=-1
&& !algo_available(PREFTYPE_ZIP,opt.compress_algo,NULL))
{
badalg = compress_algo_to_string(opt.compress_algo);
badtype = PREFTYPE_ZIP;
}
if(badalg)
{
switch(badtype)
{
case PREFTYPE_SYM:
log_info(_("you may not use cipher algorithm '%s'"
" while in %s mode\n"),
badalg,compliance_option_string());
break;
case PREFTYPE_HASH:
log_info(_("you may not use digest algorithm '%s'"
" while in %s mode\n"),
badalg,compliance_option_string());
break;
case PREFTYPE_ZIP:
log_info(_("you may not use compression algorithm '%s'"
" while in %s mode\n"),
badalg,compliance_option_string());
break;
default:
BUG();
}
compliance_failure();
}
}
/* Set the random seed file. */
if( use_random_seed ) {
char *p = make_filename(opt.homedir, "random_seed", NULL );
gcry_control (GCRYCTL_SET_RANDOM_SEED_FILE, p);
if (!access (p, F_OK))
register_secured_file (p);
xfree(p);
}
/* If there is no command but the --fingerprint is given, default
to the --list-keys command. */
if (!cmd && fpr_maybe_cmd)
{
set_cmd (&cmd, aListKeys);
}
if( opt.verbose > 1 )
set_packet_list_mode(1);
/* Add the keyrings, but not for some special commands.
We always need to add the keyrings if we are running under
SELinux, this is so that the rings are added to the list of
secured files. */
if( ALWAYS_ADD_KEYRINGS
|| (cmd != aDeArmor && cmd != aEnArmor && cmd != aGPGConfTest) )
{
if (!nrings || default_keyring) /* Add default ring. */
keydb_add_resource ("pubring" EXTSEP_S GPGEXT_GPG,
KEYDB_RESOURCE_FLAG_DEFAULT);
for (sl = nrings; sl; sl = sl->next )
keydb_add_resource (sl->d, sl->flags);
}
FREE_STRLIST(nrings);
if (cmd == aGPGConfTest)
g10_exit(0);
if( pwfd != -1 ) /* Read the passphrase now. */
read_passphrase_from_fd( pwfd );
fname = argc? *argv : NULL;
if(fname && utf8_strings)
opt.flags.utf8_filename=1;
ctrl = xcalloc (1, sizeof *ctrl);
gpg_init_default_ctrl (ctrl);
#ifndef NO_TRUST_MODELS
switch (cmd)
{
case aPrimegen:
case aPrintMD:
case aPrintMDs:
case aGenRandom:
case aDeArmor:
case aEnArmor:
break;
case aFixTrustDB:
case aExportOwnerTrust:
rc = setup_trustdb (0, trustdb_name);
break;
case aListTrustDB:
rc = setup_trustdb (argc? 1:0, trustdb_name);
break;
default:
/* If we are using TM_ALWAYS, we do not need to create the
trustdb. */
rc = setup_trustdb (opt.trust_model != TM_ALWAYS, trustdb_name);
break;
}
if (rc)
log_error (_("failed to initialize the TrustDB: %s\n"), g10_errstr(rc));
#endif /*!NO_TRUST_MODELS*/
switch (cmd)
{
case aStore:
case aSym:
case aSign:
case aSignSym:
case aClearsign:
if (!opt.quiet && any_explicit_recipient)
log_info (_("WARNING: recipients (-r) given "
"without using public key encryption\n"));
break;
default:
break;
}
switch( cmd )
{
case aServer:
gpg_server (ctrl);
break;
case aStore: /* only store the file */
if( argc > 1 )
wrong_args(_("--store [filename]"));
if( (rc = encrypt_store(fname)) )
log_error ("storing '%s' failed: %s\n",
print_fname_stdin(fname),g10_errstr(rc) );
break;
case aSym: /* encrypt the given file only with the symmetric cipher */
if( argc > 1 )
wrong_args(_("--symmetric [filename]"));
if( (rc = encrypt_symmetric(fname)) )
log_error (_("symmetric encryption of '%s' failed: %s\n"),
print_fname_stdin(fname),g10_errstr(rc) );
break;
case aEncr: /* encrypt the given file */
if(multifile)
encrypt_crypt_files (ctrl, argc, argv, remusr);
else
{
if( argc > 1 )
wrong_args(_("--encrypt [filename]"));
if( (rc = encrypt_crypt (ctrl, -1, fname, remusr, 0, NULL, -1)) )
log_error("%s: encryption failed: %s\n",
print_fname_stdin(fname), g10_errstr(rc) );
}
break;
case aEncrSym:
/* This works with PGP 8 in the sense that it acts just like a
symmetric message. It doesn't work at all with 2 or 6. It
might work with 7, but alas, I don't have a copy to test
with right now. */
if( argc > 1 )
wrong_args(_("--symmetric --encrypt [filename]"));
else if(opt.s2k_mode==0)
log_error(_("you cannot use --symmetric --encrypt"
" with --s2k-mode 0\n"));
else if(PGP2 || PGP6 || PGP7 || RFC1991)
log_error(_("you cannot use --symmetric --encrypt"
" while in %s mode\n"),compliance_option_string());
else
{
if( (rc = encrypt_crypt (ctrl, -1, fname, remusr, 1, NULL, -1)) )
log_error("%s: encryption failed: %s\n",
print_fname_stdin(fname), g10_errstr(rc) );
}
break;
case aSign: /* sign the given file */
sl = NULL;
if( detached_sig ) { /* sign all files */
for( ; argc; argc--, argv++ )
add_to_strlist( &sl, *argv );
}
else {
if( argc > 1 )
wrong_args(_("--sign [filename]"));
if( argc ) {
sl = xmalloc_clear( sizeof *sl + strlen(fname));
strcpy(sl->d, fname);
}
}
if( (rc = sign_file (ctrl, sl, detached_sig, locusr, 0, NULL, NULL)) )
log_error("signing failed: %s\n", g10_errstr(rc) );
free_strlist(sl);
break;
case aSignEncr: /* sign and encrypt the given file */
if( argc > 1 )
wrong_args(_("--sign --encrypt [filename]"));
if( argc ) {
sl = xmalloc_clear( sizeof *sl + strlen(fname));
strcpy(sl->d, fname);
}
else
sl = NULL;
if ((rc = sign_file (ctrl, sl, detached_sig, locusr, 1, remusr, NULL)))
log_error("%s: sign+encrypt failed: %s\n",
print_fname_stdin(fname), g10_errstr(rc) );
free_strlist(sl);
break;
case aSignEncrSym: /* sign and encrypt the given file */
if( argc > 1 )
wrong_args(_("--symmetric --sign --encrypt [filename]"));
else if(opt.s2k_mode==0)
log_error(_("you cannot use --symmetric --sign --encrypt"
" with --s2k-mode 0\n"));
else if(PGP2 || PGP6 || PGP7 || RFC1991)
log_error(_("you cannot use --symmetric --sign --encrypt"
" while in %s mode\n"),compliance_option_string());
else
{
if( argc )
{
sl = xmalloc_clear( sizeof *sl + strlen(fname));
strcpy(sl->d, fname);
}
else
sl = NULL;
if ((rc = sign_file (ctrl, sl, detached_sig, locusr,
2, remusr, NULL)))
log_error("%s: symmetric+sign+encrypt failed: %s\n",
print_fname_stdin(fname), g10_errstr(rc) );
free_strlist(sl);
}
break;
case aSignSym: /* sign and conventionally encrypt the given file */
if (argc > 1)
wrong_args(_("--sign --symmetric [filename]"));
rc = sign_symencrypt_file (fname, locusr);
if (rc)
log_error("%s: sign+symmetric failed: %s\n",
print_fname_stdin(fname), g10_errstr(rc) );
break;
case aClearsign: /* make a clearsig */
if( argc > 1 )
wrong_args(_("--clearsign [filename]"));
if( (rc = clearsign_file(fname, locusr, NULL)) )
log_error("%s: clearsign failed: %s\n",
print_fname_stdin(fname), g10_errstr(rc) );
break;
case aVerify:
if (multifile)
{
if ((rc = verify_files (ctrl, argc, argv)))
log_error("verify files failed: %s\n", g10_errstr(rc) );
}
else
{
if ((rc = verify_signatures (ctrl, argc, argv)))
log_error("verify signatures failed: %s\n", g10_errstr(rc) );
}
break;
case aDecrypt:
if (multifile)
decrypt_messages (ctrl, argc, argv);
else
{
if( argc > 1 )
wrong_args(_("--decrypt [filename]"));
if( (rc = decrypt_message (ctrl, fname) ))
log_error("decrypt_message failed: %s\n", g10_errstr(rc) );
}
break;
+ case aQuickSignKey:
+ case aQuickLSignKey:
+ {
+ const char *fpr;
+
+ if (argc < 1)
+ wrong_args ("--quick-[l]sign-key fingerprint [userids]");
+ fpr = *argv++; argc--;
+ sl = NULL;
+ for( ; argc; argc--, argv++)
+ append_to_strlist2 (&sl, *argv, utf8_strings);
+ keyedit_quick_sign (ctrl, fpr, sl, locusr, (cmd == aQuickLSignKey));
+ free_strlist (sl);
+ }
+ break;
+
case aSignKey:
if( argc != 1 )
wrong_args(_("--sign-key user-id"));
/* fall through */
case aLSignKey:
if( argc != 1 )
wrong_args(_("--lsign-key user-id"));
/* fall through */
sl=NULL;
if(cmd==aSignKey)
append_to_strlist(&sl,"sign");
else if(cmd==aLSignKey)
append_to_strlist(&sl,"lsign");
else
BUG();
append_to_strlist( &sl, "save" );
username = make_username( fname );
keyedit_menu (ctrl, username, locusr, sl, 0, 0 );
xfree(username);
free_strlist(sl);
break;
case aEditKey: /* Edit a key signature */
if( !argc )
wrong_args(_("--edit-key user-id [commands]"));
username = make_username( fname );
if( argc > 1 ) {
sl = NULL;
for( argc--, argv++ ; argc; argc--, argv++ )
append_to_strlist( &sl, *argv );
keyedit_menu (ctrl, username, locusr, sl, 0, 1 );
free_strlist(sl);
}
else
keyedit_menu (ctrl, username, locusr, NULL, 0, 1 );
xfree(username);
break;
case aPasswd:
if (argc != 1)
wrong_args (_("--passwd <user-id>"));
else
{
username = make_username (fname);
keyedit_passwd (ctrl, username);
xfree (username);
}
break;
case aDeleteKeys:
case aDeleteSecretKeys:
case aDeleteSecretAndPublicKeys:
sl = NULL;
/* I'm adding these in reverse order as add_to_strlist2
reverses them again, and it's easier to understand in the
proper order :) */
for( ; argc; argc-- )
add_to_strlist2( &sl, argv[argc-1], utf8_strings );
delete_keys(sl,cmd==aDeleteSecretKeys,cmd==aDeleteSecretAndPublicKeys);
free_strlist(sl);
break;
case aCheckKeys:
opt.check_sigs = 1;
case aListSigs:
opt.list_sigs = 1;
case aListKeys:
sl = NULL;
for( ; argc; argc--, argv++ )
add_to_strlist2( &sl, *argv, utf8_strings );
public_key_list (ctrl, sl, 0);
free_strlist(sl);
break;
case aListSecretKeys:
sl = NULL;
for( ; argc; argc--, argv++ )
add_to_strlist2( &sl, *argv, utf8_strings );
secret_key_list (ctrl, sl);
free_strlist(sl);
break;
case aLocateKeys:
sl = NULL;
for (; argc; argc--, argv++)
add_to_strlist2( &sl, *argv, utf8_strings );
public_key_list (ctrl, sl, 1);
free_strlist (sl);
break;
case aKeygen: /* generate a key */
if( opt.batch ) {
if( argc > 1 )
wrong_args("--gen-key [parameterfile]");
generate_keypair (ctrl, argc? *argv : NULL, NULL, 0);
}
else {
if( argc )
wrong_args("--gen-key");
generate_keypair (ctrl, NULL, NULL, 0);
}
break;
case aFastImport:
opt.import_options |= IMPORT_FAST;
case aImport:
import_keys (ctrl, argc? argv:NULL, argc, NULL, opt.import_options);
break;
/* TODO: There are a number of command that use this same
"make strlist, call function, report error, free strlist"
pattern. Join them together here and avoid all that
duplicated code. */
case aExport:
case aSendKeys:
case aRecvKeys:
sl = NULL;
for( ; argc; argc--, argv++ )
append_to_strlist2( &sl, *argv, utf8_strings );
if( cmd == aSendKeys )
rc = keyserver_export (ctrl, sl );
else if( cmd == aRecvKeys )
rc = keyserver_import (ctrl, sl );
else
rc = export_pubkeys (ctrl, sl, opt.export_options);
if(rc)
{
if(cmd==aSendKeys)
log_error(_("keyserver send failed: %s\n"),g10_errstr(rc));
else if(cmd==aRecvKeys)
log_error(_("keyserver receive failed: %s\n"),g10_errstr(rc));
else
log_error(_("key export failed: %s\n"),g10_errstr(rc));
}
free_strlist(sl);
break;
case aSearchKeys:
sl = NULL;
for (; argc; argc--, argv++)
append_to_strlist2 (&sl, *argv, utf8_strings);
rc = keyserver_search (ctrl, sl);
if (rc)
log_error (_("keyserver search failed: %s\n"), gpg_strerror (rc));
free_strlist (sl);
break;
case aRefreshKeys:
sl = NULL;
for( ; argc; argc--, argv++ )
append_to_strlist2( &sl, *argv, utf8_strings );
rc = keyserver_refresh (ctrl, sl);
if(rc)
log_error(_("keyserver refresh failed: %s\n"),g10_errstr(rc));
free_strlist(sl);
break;
case aFetchKeys:
sl = NULL;
for( ; argc; argc--, argv++ )
append_to_strlist2( &sl, *argv, utf8_strings );
rc = keyserver_fetch (ctrl, sl);
if(rc)
log_error("key fetch failed: %s\n",g10_errstr(rc));
free_strlist(sl);
break;
case aExportSecret:
sl = NULL;
for( ; argc; argc--, argv++ )
add_to_strlist2( &sl, *argv, utf8_strings );
export_seckeys (ctrl, sl);
free_strlist(sl);
break;
case aExportSecretSub:
sl = NULL;
for( ; argc; argc--, argv++ )
add_to_strlist2( &sl, *argv, utf8_strings );
export_secsubkeys (ctrl, sl);
free_strlist(sl);
break;
case aGenRevoke:
if( argc != 1 )
wrong_args("--gen-revoke user-id");
username = make_username(*argv);
gen_revoke( username );
xfree( username );
break;
case aDesigRevoke:
if( argc != 1 )
wrong_args("--desig-revoke user-id");
username = make_username(*argv);
gen_desig_revoke( username, locusr );
xfree( username );
break;
case aDeArmor:
if( argc > 1 )
wrong_args("--dearmor [file]");
rc = dearmor_file( argc? *argv: NULL );
if( rc )
log_error(_("dearmoring failed: %s\n"), g10_errstr(rc));
break;
case aEnArmor:
if( argc > 1 )
wrong_args("--enarmor [file]");
rc = enarmor_file( argc? *argv: NULL );
if( rc )
log_error(_("enarmoring failed: %s\n"), g10_errstr(rc));
break;
case aPrimegen:
#if 0 /*FIXME*/
{ int mode = argc < 2 ? 0 : atoi(*argv);
if( mode == 1 && argc == 2 ) {
mpi_print (es_stdout,
generate_public_prime( atoi(argv[1]) ), 1);
}
else if( mode == 2 && argc == 3 ) {
mpi_print (es_stdout, generate_elg_prime(
0, atoi(argv[1]),
atoi(argv[2]), NULL,NULL ), 1);
}
else if( mode == 3 && argc == 3 ) {
MPI *factors;
mpi_print (es_stdout, generate_elg_prime(
1, atoi(argv[1]),
atoi(argv[2]), NULL,&factors ), 1);
putchar('\n');
mpi_print (es_stdout, factors[0], 1 ); /* print q */
}
else if( mode == 4 && argc == 3 ) {
MPI g = mpi_alloc(1);
mpi_print (es_stdout, generate_elg_prime(
0, atoi(argv[1]),
atoi(argv[2]), g, NULL ), 1);
putchar('\n');
mpi_print (es_stdout, g, 1 );
mpi_free (g);
}
else
wrong_args("--gen-prime mode bits [qbits] ");
putchar('\n');
}
#endif
wrong_args("--gen-prime not yet supported ");
break;
case aGenRandom:
{
int level = argc ? atoi(*argv):0;
int count = argc > 1 ? atoi(argv[1]): 0;
int endless = !count;
if( argc < 1 || argc > 2 || level < 0 || level > 2 || count < 0 )
wrong_args("--gen-random 0|1|2 [count]");
while( endless || count ) {
byte *p;
/* Wee need a multiple of 3, so that in case of
armored output we get a correct string. No
linefolding is done, as it is best to levae this to
other tools */
size_t n = !endless && count < 99? count : 99;
p = gcry_random_bytes (n, level);
#ifdef HAVE_DOSISH_SYSTEM
setmode ( fileno(stdout), O_BINARY );
#endif
if (opt.armor) {
char *tmp = make_radix64_string (p, n);
fputs (tmp, stdout);
xfree (tmp);
if (n%3 == 1)
putchar ('=');
if (n%3)
putchar ('=');
} else {
fwrite( p, n, 1, stdout );
}
xfree(p);
if( !endless )
count -= n;
}
if (opt.armor)
putchar ('\n');
}
break;
case aPrintMD:
if( argc < 1)
wrong_args("--print-md algo [files]");
{
int all_algos = (**argv=='*' && !(*argv)[1]);
int algo = all_algos? 0 : gcry_md_map_name (*argv);
if( !algo && !all_algos )
log_error(_("invalid hash algorithm '%s'\n"), *argv );
else {
argc--; argv++;
if( !argc )
print_mds(NULL, algo);
else {
for(; argc; argc--, argv++ )
print_mds(*argv, algo);
}
}
}
break;
case aPrintMDs: /* old option */
if( !argc )
print_mds(NULL,0);
else {
for(; argc; argc--, argv++ )
print_mds(*argv,0);
}
break;
#ifndef NO_TRUST_MODELS
case aListTrustDB:
if( !argc )
list_trustdb(NULL);
else {
for( ; argc; argc--, argv++ )
list_trustdb( *argv );
}
break;
case aUpdateTrustDB:
if( argc )
wrong_args("--update-trustdb");
update_trustdb();
break;
case aCheckTrustDB:
/* Old versions allowed for arguments - ignore them */
check_trustdb();
break;
case aFixTrustDB:
how_to_fix_the_trustdb ();
break;
case aListTrustPath:
if( !argc )
wrong_args("--list-trust-path <user-ids>");
for( ; argc; argc--, argv++ ) {
username = make_username( *argv );
list_trust_path( username );
xfree(username);
}
break;
case aExportOwnerTrust:
if( argc )
wrong_args("--export-ownertrust");
export_ownertrust();
break;
case aImportOwnerTrust:
if( argc > 1 )
wrong_args("--import-ownertrust [file]");
import_ownertrust( argc? *argv:NULL );
break;
#endif /*!NO_TRUST_MODELS*/
case aRebuildKeydbCaches:
if (argc)
wrong_args ("--rebuild-keydb-caches");
keydb_rebuild_caches (1);
break;
#ifdef ENABLE_CARD_SUPPORT
case aCardStatus:
if (argc)
wrong_args ("--card-status");
card_status (es_stdout, NULL, 0);
break;
case aCardEdit:
if (argc) {
sl = NULL;
for (argc--, argv++ ; argc; argc--, argv++)
append_to_strlist (&sl, *argv);
card_edit (ctrl, sl);
free_strlist (sl);
}
else
card_edit (ctrl, NULL);
break;
case aChangePIN:
if (!argc)
change_pin (0,1);
else if (argc == 1)
change_pin (atoi (*argv),1);
else
wrong_args ("--change-pin [no]");
break;
#endif /* ENABLE_CARD_SUPPORT*/
case aListConfig:
{
char *str=collapse_args(argc,argv);
list_config(str);
xfree(str);
}
break;
case aListPackets:
opt.list_packets=2;
default:
if( argc > 1 )
wrong_args(_("[filename]"));
/* Issue some output for the unix newbie */
if (!fname && !opt.outfile
&& gnupg_isatty (fileno (stdin))
&& gnupg_isatty (fileno (stdout))
&& gnupg_isatty (fileno (stderr)))
log_info(_("Go ahead and type your message ...\n"));
a = iobuf_open(fname);
if (a && is_secured_file (iobuf_get_fd (a)))
{
iobuf_close (a);
a = NULL;
gpg_err_set_errno (EPERM);
}
if( !a )
log_error(_("can't open '%s'\n"), print_fname_stdin(fname));
else {
if( !opt.no_armor ) {
if( use_armor_filter( a ) ) {
afx = new_armor_context ();
push_armor_filter (afx, a);
}
}
if( cmd == aListPackets ) {
set_packet_list_mode(1);
opt.list_packets=1;
}
rc = proc_packets (ctrl, NULL, a );
if( rc )
log_error("processing message failed: %s\n", g10_errstr(rc) );
iobuf_close(a);
}
break;
}
/* cleanup */
gpg_deinit_default_ctrl (ctrl);
xfree (ctrl);
release_armor_context (afx);
FREE_STRLIST(remusr);
FREE_STRLIST(locusr);
g10_exit(0);
return 8; /*NEVER REACHED*/
}
/* Note: This function is used by signal handlers!. */
static void
emergency_cleanup (void)
{
gcry_control (GCRYCTL_TERM_SECMEM );
}
void
g10_exit( int rc )
{
gcry_control (GCRYCTL_UPDATE_RANDOM_SEED_FILE);
if (DBG_CLOCK)
log_clock ("stop");
if ( (opt.debug & DBG_MEMSTAT_VALUE) )
{
gcry_control (GCRYCTL_DUMP_MEMORY_STATS);
gcry_control (GCRYCTL_DUMP_RANDOM_STATS);
}
if (opt.debug)
gcry_control (GCRYCTL_DUMP_SECMEM_STATS );
emergency_cleanup ();
rc = rc? rc : log_get_errorcount(0)? 2 : g10_errors_seen? 1 : 0;
exit (rc);
}
/* Pretty-print hex hashes. This assumes at least an 80-character
display, but there are a few other similar assumptions in the
display code. */
static void
print_hex (gcry_md_hd_t md, int algo, const char *fname)
{
int i,n,count,indent=0;
const byte *p;
if (fname)
indent = es_printf("%s: ",fname);
if (indent>40)
{
printf("\n");
indent=0;
}
if (algo==DIGEST_ALGO_RMD160)
indent += es_printf("RMD160 = ");
else if (algo>0)
indent += es_printf("%6s = ", gcry_md_algo_name (algo));
else
algo = abs(algo);
count = indent;
p = gcry_md_read (md, algo);
n = gcry_md_get_algo_dlen (algo);
count += es_printf ("%02X",*p++);
for(i=1;i<n;i++,p++)
{
if(n==16)
{
if(count+2>79)
{
es_printf ("\n%*s",indent," ");
count = indent;
}
else
count += es_printf(" ");
if (!(i%8))
count += es_printf(" ");
}
else if (n==20)
{
if(!(i%2))
{
if(count+4>79)
{
es_printf ("\n%*s",indent," ");
count=indent;
}
else
count += es_printf(" ");
}
if (!(i%10))
count += es_printf(" ");
}
else
{
if(!(i%4))
{
if (count+8>79)
{
es_printf ("\n%*s",indent," ");
count=indent;
}
else
count += es_printf(" ");
}
}
count += es_printf("%02X",*p);
}
es_printf ("\n");
}
static void
print_hashline( gcry_md_hd_t md, int algo, const char *fname )
{
int i, n;
const byte *p;
if ( fname )
{
for (p = fname; *p; p++ )
{
if ( *p <= 32 || *p > 127 || *p == ':' || *p == '%' )
es_printf ("%%%02X", *p );
else
es_putc (*p, es_stdout);
}
}
es_putc (':', es_stdout);
es_printf ("%d:", algo);
p = gcry_md_read (md, algo);
n = gcry_md_get_algo_dlen (algo);
for(i=0; i < n ; i++, p++ )
es_printf ("%02X", *p);
es_fputs (":\n", es_stdout);
}
static void
print_mds( const char *fname, int algo )
{
FILE *fp;
char buf[1024];
size_t n;
gcry_md_hd_t md;
if( !fname ) {
fp = stdin;
#ifdef HAVE_DOSISH_SYSTEM
setmode ( fileno(fp) , O_BINARY );
#endif
}
else {
fp = fopen( fname, "rb" );
if (fp && is_secured_file (fileno (fp)))
{
fclose (fp);
fp = NULL;
gpg_err_set_errno (EPERM);
}
}
if( !fp ) {
log_error("%s: %s\n", fname?fname:"[stdin]", strerror(errno) );
return;
}
gcry_md_open (&md, 0, 0);
if( algo )
gcry_md_enable (md, algo);
else {
if (!openpgp_md_test_algo (GCRY_MD_MD5))
gcry_md_enable (md, GCRY_MD_MD5);
gcry_md_enable (md, GCRY_MD_SHA1);
if (!openpgp_md_test_algo (GCRY_MD_RMD160))
gcry_md_enable (md, GCRY_MD_RMD160);
if (!openpgp_md_test_algo (GCRY_MD_SHA224))
gcry_md_enable (md, GCRY_MD_SHA224);
if (!openpgp_md_test_algo (GCRY_MD_SHA256))
gcry_md_enable (md, GCRY_MD_SHA256);
if (!openpgp_md_test_algo (GCRY_MD_SHA384))
gcry_md_enable (md, GCRY_MD_SHA384);
if (!openpgp_md_test_algo (GCRY_MD_SHA512))
gcry_md_enable (md, GCRY_MD_SHA512);
}
while( (n=fread( buf, 1, DIM(buf), fp )) )
gcry_md_write (md, buf, n);
if( ferror(fp) )
log_error("%s: %s\n", fname?fname:"[stdin]", strerror(errno) );
else {
gcry_md_final (md);
if ( opt.with_colons ) {
if ( algo )
print_hashline( md, algo, fname );
else {
if (!openpgp_md_test_algo (GCRY_MD_MD5))
print_hashline( md, GCRY_MD_MD5, fname );
print_hashline( md, GCRY_MD_SHA1, fname );
if (!openpgp_md_test_algo (GCRY_MD_RMD160))
print_hashline( md, GCRY_MD_RMD160, fname );
if (!openpgp_md_test_algo (GCRY_MD_SHA224))
print_hashline (md, GCRY_MD_SHA224, fname);
if (!openpgp_md_test_algo (GCRY_MD_SHA256))
print_hashline( md, GCRY_MD_SHA256, fname );
if (!openpgp_md_test_algo (GCRY_MD_SHA384))
print_hashline ( md, GCRY_MD_SHA384, fname );
if (!openpgp_md_test_algo (GCRY_MD_SHA512))
print_hashline ( md, GCRY_MD_SHA512, fname );
}
}
else {
if( algo )
print_hex(md,-algo,fname);
else {
if (!openpgp_md_test_algo (GCRY_MD_MD5))
print_hex( md, GCRY_MD_MD5, fname );
print_hex( md, GCRY_MD_SHA1, fname );
if (!openpgp_md_test_algo (GCRY_MD_RMD160))
print_hex( md, GCRY_MD_RMD160, fname );
if (!openpgp_md_test_algo (GCRY_MD_SHA224))
print_hex (md, GCRY_MD_SHA224, fname);
if (!openpgp_md_test_algo (GCRY_MD_SHA256))
print_hex( md, GCRY_MD_SHA256, fname );
if (!openpgp_md_test_algo (GCRY_MD_SHA384))
print_hex( md, GCRY_MD_SHA384, fname );
if (!openpgp_md_test_algo (GCRY_MD_SHA512))
print_hex( md, GCRY_MD_SHA512, fname );
}
}
}
gcry_md_close(md);
if( fp != stdin )
fclose(fp);
}
/****************
* Check the supplied name,value string and add it to the notation
* data to be used for signatures. which==0 for sig notations, and 1
* for cert notations.
*/
static void
add_notation_data( const char *string, int which )
{
struct notation *notation;
notation=string_to_notation(string,utf8_strings);
if(notation)
{
if(which)
{
notation->next=opt.cert_notations;
opt.cert_notations=notation;
}
else
{
notation->next=opt.sig_notations;
opt.sig_notations=notation;
}
}
}
static void
add_policy_url( const char *string, int which )
{
unsigned int i,critical=0;
strlist_t sl;
if(*string=='!')
{
string++;
critical=1;
}
for(i=0;i<strlen(string);i++)
if( !isascii (string[i]) || iscntrl(string[i]))
break;
if(i==0 || i<strlen(string))
{
if(which)
log_error(_("the given certification policy URL is invalid\n"));
else
log_error(_("the given signature policy URL is invalid\n"));
}
if(which)
sl=add_to_strlist( &opt.cert_policy_url, string );
else
sl=add_to_strlist( &opt.sig_policy_url, string );
if(critical)
sl->flags |= 1;
}
static void
add_keyserver_url( const char *string, int which )
{
unsigned int i,critical=0;
strlist_t sl;
if(*string=='!')
{
string++;
critical=1;
}
for(i=0;i<strlen(string);i++)
if( !isascii (string[i]) || iscntrl(string[i]))
break;
if(i==0 || i<strlen(string))
{
if(which)
BUG();
else
log_error(_("the given preferred keyserver URL is invalid\n"));
}
if(which)
BUG();
else
sl=add_to_strlist( &opt.sig_keyserver_url, string );
if(critical)
sl->flags |= 1;
}
diff --git a/g10/keyedit.c b/g10/keyedit.c
index b7f7ad66b..c4d7ca8e3 100644
--- a/g10/keyedit.c
+++ b/g10/keyedit.c
@@ -1,5079 +1,5257 @@
/* keyedit.c - keyedit stuff
* Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
* 2008, 2009, 2010 Free Software Foundation, Inc.
* Copyright (C) 2013, 2014 Werner Koch
*
* This file is part of GnuPG.
*
* GnuPG is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* GnuPG is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include <config.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <assert.h>
#include <ctype.h>
#ifdef HAVE_LIBREADLINE
# define GNUPG_LIBREADLINE_H_INCLUDED
# include <readline/readline.h>
#endif
#define JNLIB_NEED_LOG_LOGV
#include "gpg.h"
#include "options.h"
#include "packet.h"
#include "status.h"
#include "iobuf.h"
#include "keydb.h"
#include "photoid.h"
#include "util.h"
#include "main.h"
#include "trustdb.h"
#include "filter.h"
#include "ttyio.h"
#include "status.h"
#include "i18n.h"
#include "keyserver-internal.h"
#include "call-agent.h"
static void show_prefs (PKT_user_id * uid, PKT_signature * selfsig,
int verbose);
static void show_names (estream_t fp, KBNODE keyblock, PKT_public_key * pk,
unsigned int flag, int with_prefs);
static void show_key_with_all_names (estream_t fp,
KBNODE keyblock, int only_marked,
int with_revoker, int with_fpr,
- int with_subkeys, int with_prefs);
+ int with_subkeys, int with_prefs,
+ int nowarn);
static void show_key_and_fingerprint (KBNODE keyblock);
static int menu_adduid (KBNODE keyblock, int photo, const char *photo_name);
static void menu_deluid (KBNODE pub_keyblock);
static int menu_delsig (KBNODE pub_keyblock);
static int menu_clean (KBNODE keyblock, int self_only);
static void menu_delkey (KBNODE pub_keyblock);
static int menu_addrevoker (ctrl_t ctrl, kbnode_t pub_keyblock, int sensitive);
static int menu_expire (KBNODE pub_keyblock);
static int menu_backsign (KBNODE pub_keyblock);
static int menu_set_primary_uid (KBNODE pub_keyblock);
static int menu_set_preferences (KBNODE pub_keyblock);
static int menu_set_keyserver_url (const char *url, KBNODE pub_keyblock);
static int menu_set_notation (const char *string, KBNODE pub_keyblock);
static int menu_select_uid (KBNODE keyblock, int idx);
static int menu_select_uid_namehash (KBNODE keyblock, const char *namehash);
static int menu_select_key (KBNODE keyblock, int idx);
static int count_uids (KBNODE keyblock);
static int count_uids_with_flag (KBNODE keyblock, unsigned flag);
static int count_keys_with_flag (KBNODE keyblock, unsigned flag);
static int count_selected_uids (KBNODE keyblock);
static int real_uids_left (KBNODE keyblock);
static int count_selected_keys (KBNODE keyblock);
static int menu_revsig (KBNODE keyblock);
static int menu_revuid (KBNODE keyblock);
static int menu_revkey (KBNODE pub_keyblock);
static int menu_revsubkey (KBNODE pub_keyblock);
#ifndef NO_TRUST_MODELS
static int enable_disable_key (KBNODE keyblock, int disable);
#endif /*!NO_TRUST_MODELS*/
static void menu_showphoto (KBNODE keyblock);
static int update_trust = 0;
#define CONTROL_D ('D' - 'A' + 1)
#define NODFLG_BADSIG (1<<0) /* Bad signature. */
#define NODFLG_NOKEY (1<<1) /* No public key. */
#define NODFLG_SIGERR (1<<2) /* Other sig error. */
#define NODFLG_MARK_A (1<<4) /* Temporary mark. */
#define NODFLG_DELSIG (1<<5) /* To be deleted. */
#define NODFLG_SELUID (1<<8) /* Indicate the selected userid. */
#define NODFLG_SELKEY (1<<9) /* Indicate the selected key. */
#define NODFLG_SELSIG (1<<10) /* Indicate a selected signature. */
struct sign_attrib
{
int non_exportable, non_revocable;
struct revocation_reason_info *reason;
byte trust_depth, trust_value;
char *trust_regexp;
};
/* TODO: Fix duplicated code between here and the check-sigs/list-sigs
code in keylist.c. */
static int
print_and_check_one_sig_colon (KBNODE keyblock, KBNODE node,
int *inv_sigs, int *no_key, int *oth_err,
int *is_selfsig, int print_without_key)
{
PKT_signature *sig = node->pkt->pkt.signature;
int rc, sigrc;
/* TODO: Make sure a cached sig record here still has the pk that
issued it. See also keylist.c:list_keyblock_print */
switch ((rc = check_key_signature (keyblock, node, is_selfsig)))
{
case 0:
node->flag &= ~(NODFLG_BADSIG | NODFLG_NOKEY | NODFLG_SIGERR);
sigrc = '!';
break;
case G10ERR_BAD_SIGN:
node->flag = NODFLG_BADSIG;
sigrc = '-';
if (inv_sigs)
++ * inv_sigs;
break;
case G10ERR_NO_PUBKEY:
case G10ERR_UNU_PUBKEY:
node->flag = NODFLG_NOKEY;
sigrc = '?';
if (no_key)
++ * no_key;
break;
default:
node->flag = NODFLG_SIGERR;
sigrc = '%';
if (oth_err)
++ * oth_err;
break;
}
if (sigrc != '?' || print_without_key)
{
printf ("sig:%c::%d:%08lX%08lX:%lu:%lu:",
sigrc, sig->pubkey_algo, (ulong) sig->keyid[0],
(ulong) sig->keyid[1], (ulong) sig->timestamp,
(ulong) sig->expiredate);
if (sig->trust_depth || sig->trust_value)
printf ("%d %d", sig->trust_depth, sig->trust_value);
printf (":");
if (sig->trust_regexp)
es_write_sanitized (es_stdout,
sig->trust_regexp, strlen (sig->trust_regexp),
":", NULL);
printf ("::%02x%c\n", sig->sig_class,
sig->flags.exportable ? 'x' : 'l');
if (opt.show_subpackets)
print_subpackets_colon (sig);
}
return (sigrc == '!');
}
/*
* Print information about a signature, check it and return true
* if the signature is okay. NODE must be a signature packet.
*/
static int
print_and_check_one_sig (KBNODE keyblock, KBNODE node,
int *inv_sigs, int *no_key, int *oth_err,
int *is_selfsig, int print_without_key)
{
PKT_signature *sig = node->pkt->pkt.signature;
int rc, sigrc;
int is_rev = sig->sig_class == 0x30;
/* TODO: Make sure a cached sig record here still has the pk that
issued it. See also keylist.c:list_keyblock_print */
switch ((rc = check_key_signature (keyblock, node, is_selfsig)))
{
case 0:
node->flag &= ~(NODFLG_BADSIG | NODFLG_NOKEY | NODFLG_SIGERR);
sigrc = '!';
break;
case G10ERR_BAD_SIGN:
node->flag = NODFLG_BADSIG;
sigrc = '-';
if (inv_sigs)
++ * inv_sigs;
break;
case G10ERR_NO_PUBKEY:
case G10ERR_UNU_PUBKEY:
node->flag = NODFLG_NOKEY;
sigrc = '?';
if (no_key)
++ * no_key;
break;
default:
node->flag = NODFLG_SIGERR;
sigrc = '%';
if (oth_err)
++ * oth_err;
break;
}
if (sigrc != '?' || print_without_key)
{
tty_printf ("%s%c%c %c%c%c%c%c%c %s %s",
is_rev ? "rev" : "sig", sigrc,
(sig->sig_class - 0x10 > 0 &&
sig->sig_class - 0x10 <
4) ? '0' + sig->sig_class - 0x10 : ' ',
sig->flags.exportable ? ' ' : 'L',
sig->flags.revocable ? ' ' : 'R',
sig->flags.policy_url ? 'P' : ' ',
sig->flags.notation ? 'N' : ' ',
sig->flags.expired ? 'X' : ' ',
(sig->trust_depth > 9) ? 'T' : (sig->trust_depth >
0) ? '0' +
sig->trust_depth : ' ', keystr (sig->keyid),
datestr_from_sig (sig));
if (opt.list_options & LIST_SHOW_SIG_EXPIRE)
tty_printf (" %s", expirestr_from_sig (sig));
tty_printf (" ");
if (sigrc == '%')
tty_printf ("[%s] ", g10_errstr (rc));
else if (sigrc == '?')
;
else if (*is_selfsig)
{
tty_printf (is_rev ? _("[revocation]") : _("[self-signature]"));
}
else
{
size_t n;
char *p = get_user_id (sig->keyid, &n);
tty_print_utf8_string2 (NULL, p, n,
opt.screen_columns - keystrlen () - 26 -
((opt.
list_options & LIST_SHOW_SIG_EXPIRE) ? 11
: 0));
xfree (p);
}
tty_printf ("\n");
if (sig->flags.policy_url && (opt.list_options & LIST_SHOW_POLICY_URLS))
show_policy_url (sig, 3, 0);
if (sig->flags.notation && (opt.list_options & LIST_SHOW_NOTATIONS))
show_notation (sig, 3, 0,
((opt.
list_options & LIST_SHOW_STD_NOTATIONS) ? 1 : 0) +
((opt.
list_options & LIST_SHOW_USER_NOTATIONS) ? 2 : 0));
if (sig->flags.pref_ks && (opt.list_options & LIST_SHOW_KEYSERVER_URLS))
show_keyserver_url (sig, 3, 0);
}
return (sigrc == '!');
}
/*
* Check the keysigs and set the flags to indicate errors.
* Returns true if error found.
*/
static int
check_all_keysigs (KBNODE keyblock, int only_selected)
{
KBNODE kbctx;
KBNODE node;
int inv_sigs = 0;
int no_key = 0;
int oth_err = 0;
int has_selfsig = 0;
int mis_selfsig = 0;
int selected = !only_selected;
int anyuid = 0;
for (kbctx = NULL; (node = walk_kbnode (keyblock, &kbctx, 0));)
{
if (node->pkt->pkttype == PKT_USER_ID)
{
PKT_user_id *uid = node->pkt->pkt.user_id;
if (only_selected)
selected = (node->flag & NODFLG_SELUID);
if (selected)
{
tty_printf ("uid ");
tty_print_utf8_string (uid->name, uid->len);
tty_printf ("\n");
if (anyuid && !has_selfsig)
mis_selfsig++;
has_selfsig = 0;
anyuid = 1;
}
}
else if (selected && node->pkt->pkttype == PKT_SIGNATURE
&& ((node->pkt->pkt.signature->sig_class & ~3) == 0x10
|| node->pkt->pkt.signature->sig_class == 0x30))
{
int selfsig;
if (print_and_check_one_sig (keyblock, node, &inv_sigs,
&no_key, &oth_err, &selfsig, 0))
{
if (selfsig)
has_selfsig = 1;
}
/* Hmmm: should we update the trustdb here? */
}
}
if (!has_selfsig)
mis_selfsig++;
if (inv_sigs == 1)
tty_printf (_("1 bad signature\n"));
else if (inv_sigs)
tty_printf (_("%d bad signatures\n"), inv_sigs);
if (no_key == 1)
tty_printf (_("1 signature not checked due to a missing key\n"));
else if (no_key)
tty_printf (_("%d signatures not checked due to missing keys\n"), no_key);
if (oth_err == 1)
tty_printf (_("1 signature not checked due to an error\n"));
else if (oth_err)
tty_printf (_("%d signatures not checked due to errors\n"), oth_err);
if (mis_selfsig == 1)
tty_printf (_("1 user ID without valid self-signature detected\n"));
else if (mis_selfsig)
tty_printf (_("%d user IDs without valid self-signatures detected\n"),
mis_selfsig);
return inv_sigs || no_key || oth_err || mis_selfsig;
}
static int
sign_mk_attrib (PKT_signature * sig, void *opaque)
{
struct sign_attrib *attrib = opaque;
byte buf[8];
if (attrib->non_exportable)
{
buf[0] = 0; /* not exportable */
build_sig_subpkt (sig, SIGSUBPKT_EXPORTABLE, buf, 1);
}
if (attrib->non_revocable)
{
buf[0] = 0; /* not revocable */
build_sig_subpkt (sig, SIGSUBPKT_REVOCABLE, buf, 1);
}
if (attrib->reason)
revocation_reason_build_cb (sig, attrib->reason);
if (attrib->trust_depth)
{
/* Not critical. If someone doesn't understand trust sigs,
this can still be a valid regular signature. */
buf[0] = attrib->trust_depth;
buf[1] = attrib->trust_value;
build_sig_subpkt (sig, SIGSUBPKT_TRUST, buf, 2);
/* Critical. If someone doesn't understands regexps, this
whole sig should be invalid. Note the +1 for the length -
regexps are null terminated. */
if (attrib->trust_regexp)
build_sig_subpkt (sig, SIGSUBPKT_FLAG_CRITICAL | SIGSUBPKT_REGEXP,
attrib->trust_regexp,
strlen (attrib->trust_regexp) + 1);
}
return 0;
}
static void
trustsig_prompt (byte * trust_value, byte * trust_depth, char **regexp)
{
char *p;
*trust_value = 0;
*trust_depth = 0;
*regexp = NULL;
/* Same string as pkclist.c:do_edit_ownertrust */
tty_printf (_
("Please decide how far you trust this user to correctly verify"
" other users' keys\n(by looking at passports, checking"
" fingerprints from different sources, etc.)\n"));
tty_printf ("\n");
tty_printf (_(" %d = I trust marginally\n"), 1);
tty_printf (_(" %d = I trust fully\n"), 2);
tty_printf ("\n");
while (*trust_value == 0)
{
p = cpr_get ("trustsig_prompt.trust_value", _("Your selection? "));
trim_spaces (p);
cpr_kill_prompt ();
/* 60 and 120 are as per RFC2440 */
if (p[0] == '1' && !p[1])
*trust_value = 60;
else if (p[0] == '2' && !p[1])
*trust_value = 120;
xfree (p);
}
tty_printf ("\n");
tty_printf (_("Please enter the depth of this trust signature.\n"
"A depth greater than 1 allows the key you are signing to make\n"
"trust signatures on your behalf.\n"));
tty_printf ("\n");
while (*trust_depth == 0)
{
p = cpr_get ("trustsig_prompt.trust_depth", _("Your selection? "));
trim_spaces (p);
cpr_kill_prompt ();
*trust_depth = atoi (p);
xfree (p);
}
tty_printf ("\n");
tty_printf (_("Please enter a domain to restrict this signature, "
"or enter for none.\n"));
tty_printf ("\n");
p = cpr_get ("trustsig_prompt.trust_regexp", _("Your selection? "));
trim_spaces (p);
cpr_kill_prompt ();
if (strlen (p) > 0)
{
char *q = p;
int regexplen = 100, ind;
*regexp = xmalloc (regexplen);
/* Now mangle the domain the user entered into a regexp. To do
this, \-escape everything that isn't alphanumeric, and attach
"<[^>]+[@.]" to the front, and ">$" to the end. */
strcpy (*regexp, "<[^>]+[@.]");
ind = strlen (*regexp);
while (*q)
{
if (!((*q >= 'A' && *q <= 'Z')
|| (*q >= 'a' && *q <= 'z') || (*q >= '0' && *q <= '9')))
(*regexp)[ind++] = '\\';
(*regexp)[ind++] = *q;
if ((regexplen - ind) < 3)
{
regexplen += 100;
*regexp = xrealloc (*regexp, regexplen);
}
q++;
}
(*regexp)[ind] = '\0';
strcat (*regexp, ">$");
}
xfree (p);
tty_printf ("\n");
}
/*
- * Loop over all LOCUSR and and sign the uids after asking.
- * If no user id is marked, all user ids will be signed;
- * if some user_ids are marked those will be signed.
+ * Loop over all LOCUSR and and sign the uids after asking. If no
+ * user id is marked, all user ids will be signed; if some user_ids
+ * are marked only those will be signed. If QUICK is true the
+ * function won't ask the user and use sensible defaults.
*/
static int
-sign_uids (KBNODE keyblock, strlist_t locusr, int *ret_modified,
- int local, int nonrevocable, int trust, int interactive)
+sign_uids (estream_t fp,
+ kbnode_t keyblock, strlist_t locusr, int *ret_modified,
+ int local, int nonrevocable, int trust, int interactive,
+ int quick)
{
int rc = 0;
SK_LIST sk_list = NULL;
SK_LIST sk_rover = NULL;
PKT_public_key *pk = NULL;
KBNODE node, uidnode;
PKT_public_key *primary_pk = NULL;
int select_all = !count_selected_uids (keyblock) || interactive;
int all_v3 = 1;
/* Are there any non-v3 sigs on this key already? */
if (PGP2)
- for (node = keyblock; node; node = node->next)
- if (node->pkt->pkttype == PKT_SIGNATURE &&
- node->pkt->pkt.signature->version > 3)
- {
- all_v3 = 0;
- break;
- }
+ {
+ for (node = keyblock; node; node = node->next)
+ if (node->pkt->pkttype == PKT_SIGNATURE &&
+ node->pkt->pkt.signature->version > 3)
+ {
+ all_v3 = 0;
+ break;
+ }
+ }
/* Build a list of all signators.
*
* We use the CERT flag to request the primary which must always
* be one which is capable of signing keys. I can't see a reason
* why to sign keys using a subkey. Implementation of USAGE_CERT
* is just a hack in getkey.c and does not mean that a subkey
* marked as certification capable will be used. */
rc = build_sk_list (locusr, &sk_list, PUBKEY_USAGE_CERT);
if (rc)
goto leave;
/* Loop over all signators. */
for (sk_rover = sk_list; sk_rover; sk_rover = sk_rover->next)
{
u32 sk_keyid[2], pk_keyid[2];
char *p, *trust_regexp = NULL;
int force_v4 = 0, class = 0, selfsig = 0;
u32 duration = 0, timestamp = 0;
byte trust_depth = 0, trust_value = 0;
if (local || nonrevocable || trust
|| opt.cert_policy_url || opt.cert_notations)
force_v4 = 1;
pk = sk_rover->pk;
keyid_from_pk (pk, sk_keyid);
/* Set mark A for all selected user ids. */
for (node = keyblock; node; node = node->next)
{
if (select_all || (node->flag & NODFLG_SELUID))
node->flag |= NODFLG_MARK_A;
else
node->flag &= ~NODFLG_MARK_A;
}
/* Reset mark for uids which are already signed. */
uidnode = NULL;
for (node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_KEY)
{
primary_pk = node->pkt->pkt.public_key;
keyid_from_pk (primary_pk, pk_keyid);
/* Is this a self-sig? */
if (pk_keyid[0] == sk_keyid[0] && pk_keyid[1] == sk_keyid[1])
{
selfsig = 1;
/* Do not force a v4 sig here, otherwise it would
be difficult to remake a v3 selfsig. If this
is a v3->v4 promotion case, then we set
force_v4 later anyway. */
force_v4 = 0;
}
}
else if (node->pkt->pkttype == PKT_USER_ID)
{
uidnode = (node->flag & NODFLG_MARK_A) ? node : NULL;
if (uidnode)
{
int yesreally = 0;
char *user;
user = utf8_to_native (uidnode->pkt->pkt.user_id->name,
uidnode->pkt->pkt.user_id->len, 0);
if (uidnode->pkt->pkt.user_id->is_revoked)
{
- tty_printf (_("User ID \"%s\" is revoked."), user);
+ tty_fprintf (fp, _("User ID \"%s\" is revoked."), user);
if (selfsig)
- tty_printf ("\n");
- else if (opt.expert)
+ tty_fprintf (fp, "\n");
+ else if (opt.expert && !quick)
{
- tty_printf ("\n");
+ tty_fprintf (fp, "\n");
/* No, so remove the mark and continue */
if (!cpr_get_answer_is_yes ("sign_uid.revoke_okay",
_("Are you sure you "
"still want to sign "
"it? (y/N) ")))
{
uidnode->flag &= ~NODFLG_MARK_A;
uidnode = NULL;
}
else if (interactive)
yesreally = 1;
}
else
{
uidnode->flag &= ~NODFLG_MARK_A;
uidnode = NULL;
- tty_printf (_(" Unable to sign.\n"));
+ tty_fprintf (fp, _(" Unable to sign.\n"));
}
}
else if (uidnode->pkt->pkt.user_id->is_expired)
{
- tty_printf (_("User ID \"%s\" is expired."), user);
+ tty_fprintf (fp, _("User ID \"%s\" is expired."), user);
if (selfsig)
- tty_printf ("\n");
- else if (opt.expert)
+ tty_fprintf (fp, "\n");
+ else if (opt.expert && !quick)
{
- tty_printf ("\n");
+ tty_fprintf (fp, "\n");
/* No, so remove the mark and continue */
if (!cpr_get_answer_is_yes ("sign_uid.expire_okay",
_("Are you sure you "
"still want to sign "
"it? (y/N) ")))
{
uidnode->flag &= ~NODFLG_MARK_A;
uidnode = NULL;
}
else if (interactive)
yesreally = 1;
}
else
{
uidnode->flag &= ~NODFLG_MARK_A;
uidnode = NULL;
- tty_printf (_(" Unable to sign.\n"));
+ tty_fprintf (fp, _(" Unable to sign.\n"));
}
}
else if (!uidnode->pkt->pkt.user_id->created && !selfsig)
{
- tty_printf (_("User ID \"%s\" is not self-signed."),
- user);
+ tty_fprintf (fp, _("User ID \"%s\" is not self-signed."),
+ user);
- if (opt.expert)
+ if (opt.expert && !quick)
{
- tty_printf ("\n");
+ tty_fprintf (fp, "\n");
/* No, so remove the mark and continue */
if (!cpr_get_answer_is_yes ("sign_uid.nosig_okay",
_("Are you sure you "
"still want to sign "
"it? (y/N) ")))
{
uidnode->flag &= ~NODFLG_MARK_A;
uidnode = NULL;
}
else if (interactive)
yesreally = 1;
}
else
{
uidnode->flag &= ~NODFLG_MARK_A;
uidnode = NULL;
- tty_printf (_(" Unable to sign.\n"));
+ tty_fprintf (fp, _(" Unable to sign.\n"));
}
}
- if (uidnode && interactive && !yesreally)
+ if (uidnode && interactive && !yesreally && !quick)
{
- tty_printf (_("User ID \"%s\" is signable. "), user);
+ tty_fprintf (fp,
+ _("User ID \"%s\" is signable. "), user);
if (!cpr_get_answer_is_yes ("sign_uid.sign_okay",
_("Sign it? (y/N) ")))
{
uidnode->flag &= ~NODFLG_MARK_A;
uidnode = NULL;
}
}
xfree (user);
}
}
else if (uidnode && node->pkt->pkttype == PKT_SIGNATURE
&& (node->pkt->pkt.signature->sig_class & ~3) == 0x10)
{
if (sk_keyid[0] == node->pkt->pkt.signature->keyid[0]
&& sk_keyid[1] == node->pkt->pkt.signature->keyid[1])
{
char buf[50];
char *user;
user = utf8_to_native (uidnode->pkt->pkt.user_id->name,
uidnode->pkt->pkt.user_id->len, 0);
/* It's a v3 self-sig. Make it into a v4 self-sig? */
- if (node->pkt->pkt.signature->version < 4 && selfsig)
+ if (node->pkt->pkt.signature->version < 4
+ && selfsig && !quick)
{
- tty_printf (_("The self-signature on \"%s\"\n"
- "is a PGP 2.x-style signature.\n"), user);
+ tty_fprintf (fp,
+ _("The self-signature on \"%s\"\n"
+ "is a PGP 2.x-style signature.\n"), user);
/* Note that the regular PGP2 warning below
still applies if there are no v4 sigs on
this key at all. */
if (opt.expert)
if (cpr_get_answer_is_yes ("sign_uid.v4_promote_okay",
_("Do you want to promote "
"it to an OpenPGP self-"
"signature? (y/N) ")))
{
force_v4 = 1;
node->flag |= NODFLG_DELSIG;
xfree (user);
continue;
}
}
/* Is the current signature expired? */
if (node->pkt->pkt.signature->flags.expired)
{
- tty_printf (_("Your current signature on \"%s\"\n"
- "has expired.\n"), user);
+ tty_fprintf (fp, _("Your current signature on \"%s\"\n"
+ "has expired.\n"), user);
- if (cpr_get_answer_is_yes
+ if (quick || cpr_get_answer_is_yes
("sign_uid.replace_expired_okay",
_("Do you want to issue a "
"new signature to replace "
"the expired one? (y/N) ")))
{
/* Mark these for later deletion. We
don't want to delete them here, just in
case the replacement signature doesn't
happen for some reason. We only delete
these after the replacement is already
in place. */
node->flag |= NODFLG_DELSIG;
xfree (user);
continue;
}
}
if (!node->pkt->pkt.signature->flags.exportable && !local)
{
/* It's a local sig, and we want to make a
exportable sig. */
- tty_printf (_("Your current signature on \"%s\"\n"
- "is a local signature.\n"), user);
+ tty_fprintf (fp, _("Your current signature on \"%s\"\n"
+ "is a local signature.\n"), user);
- if (cpr_get_answer_is_yes
+ if (quick)
+ ;
+ else if (cpr_get_answer_is_yes
("sign_uid.local_promote_okay",
_("Do you want to promote "
"it to a full exportable " "signature? (y/N) ")))
{
/* Mark these for later deletion. We
don't want to delete them here, just in
case the replacement signature doesn't
happen for some reason. We only delete
these after the replacement is already
in place. */
node->flag |= NODFLG_DELSIG;
xfree (user);
continue;
}
}
/* Fixme: see whether there is a revocation in which
* case we should allow to sign it again. */
if (!node->pkt->pkt.signature->flags.exportable && local)
- tty_printf
- (_("\"%s\" was already locally signed by key %s\n"),
+ tty_fprintf ( fp,
+ _("\"%s\" was already locally signed by key %s\n"),
user, keystr_from_pk (pk));
else
- tty_printf (_("\"%s\" was already signed by key %s\n"),
+ tty_fprintf (fp,
+ _("\"%s\" was already signed by key %s\n"),
user, keystr_from_pk (pk));
- if (opt.expert
+ if (opt.expert && !quick
&& cpr_get_answer_is_yes ("sign_uid.dupe_okay",
_("Do you want to sign it "
"again anyway? (y/N) ")))
{
/* Don't delete the old sig here since this is
an --expert thing. */
xfree (user);
continue;
}
snprintf (buf, sizeof buf, "%08lX%08lX",
(ulong) pk->keyid[0], (ulong) pk->keyid[1]);
write_status_text (STATUS_ALREADY_SIGNED, buf);
uidnode->flag &= ~NODFLG_MARK_A; /* remove mark */
xfree (user);
}
}
}
/* Check whether any uids are left for signing. */
if (!count_uids_with_flag (keyblock, NODFLG_MARK_A))
{
- tty_printf (_("Nothing to sign with key %s\n"),
+ tty_fprintf (fp, _("Nothing to sign with key %s\n"),
keystr_from_pk (pk));
continue;
}
/* Ask whether we really should sign these user id(s). */
- tty_printf ("\n");
- show_key_with_all_names (NULL, keyblock, 1, 0, 1, 0, 0);
- tty_printf ("\n");
+ tty_fprintf (fp, "\n");
+ show_key_with_all_names (fp, keyblock, 1, 0, 1, 0, 0, 0);
+ tty_fprintf (fp, "\n");
if (primary_pk->expiredate && !selfsig)
{
u32 now = make_timestamp ();
if (primary_pk->expiredate <= now)
{
- tty_printf (_("This key has expired!"));
+ tty_fprintf (fp, _("This key has expired!"));
- if (opt.expert)
+ if (opt.expert && !quick)
{
- tty_printf (" ");
+ tty_fprintf (fp, " ");
if (!cpr_get_answer_is_yes ("sign_uid.expired_okay",
_("Are you sure you still "
"want to sign it? (y/N) ")))
continue;
}
else
{
- tty_printf (_(" Unable to sign.\n"));
+ tty_fprintf (fp, _(" Unable to sign.\n"));
continue;
}
}
else
{
- tty_printf (_("This key is due to expire on %s.\n"),
- expirestr_from_pk (primary_pk));
+ tty_fprintf (fp, _("This key is due to expire on %s.\n"),
+ expirestr_from_pk (primary_pk));
- if (opt.ask_cert_expire)
+ if (opt.ask_cert_expire && !quick)
{
char *answer = cpr_get ("sign_uid.expire",
_("Do you want your signature to "
"expire at the same time? (Y/n) "));
if (answer_is_yes_no_default (answer, 1))
{
/* This fixes the signature timestamp we're
going to make as now. This is so the
expiration date is exactly correct, and not
a few seconds off (due to the time it takes
to answer the questions, enter the
passphrase, etc). */
timestamp = now;
duration = primary_pk->expiredate - now;
force_v4 = 1;
}
cpr_kill_prompt ();
xfree (answer);
}
}
}
/* Only ask for duration if we haven't already set it to match
the expiration of the pk */
if (!duration && !selfsig)
{
- if (opt.ask_cert_expire)
+ if (opt.ask_cert_expire && !quick)
duration = ask_expire_interval (1, opt.def_cert_expire);
else
duration = parse_expire_string (opt.def_cert_expire);
}
if (duration)
force_v4 = 1;
/* Is --pgp2 on, it's a v3 key, all the sigs on the key are
currently v3 and we're about to sign it with a v4 sig? If
so, danger! */
if (PGP2 && all_v3 &&
(pk->version > 3 || force_v4) && primary_pk->version <= 3)
{
- tty_printf (_("You may not make an OpenPGP signature on a "
- "PGP 2.x key while in --pgp2 mode.\n"));
- tty_printf (_("This would make the key unusable in PGP 2.x.\n"));
+ tty_fprintf (fp, _("You may not make an OpenPGP signature on a "
+ "PGP 2.x key while in --pgp2 mode.\n"));
+ tty_fprintf (fp, _("This would make the key unusable in PGP 2.x.\n"));
- if (opt.expert)
+ if (opt.expert && !quick)
{
if (!cpr_get_answer_is_yes ("sign_uid.v4_on_v3_okay",
_("Are you sure you still "
"want to sign it? (y/N) ")))
continue;
all_v3 = 0;
}
else
continue;
}
if (selfsig)
;
else
{
- if (opt.batch || !opt.ask_cert_level)
+ if (opt.batch || !opt.ask_cert_level || quick)
class = 0x10 + opt.def_cert_level;
else
{
char *answer;
- tty_printf (_("How carefully have you verified the key you are "
+ tty_fprintf (fp,
+ _("How carefully have you verified the key you are "
"about to sign actually belongs\nto the person "
"named above? If you don't know what to "
"answer, enter \"0\".\n"));
- tty_printf ("\n");
- tty_printf (_(" (0) I will not answer.%s\n"),
+ tty_fprintf (fp, "\n");
+ tty_fprintf (fp, _(" (0) I will not answer.%s\n"),
opt.def_cert_level == 0 ? " (default)" : "");
- tty_printf (_(" (1) I have not checked at all.%s\n"),
+ tty_fprintf (fp, _(" (1) I have not checked at all.%s\n"),
opt.def_cert_level == 1 ? " (default)" : "");
- tty_printf (_(" (2) I have done casual checking.%s\n"),
+ tty_fprintf (fp, _(" (2) I have done casual checking.%s\n"),
opt.def_cert_level == 2 ? " (default)" : "");
- tty_printf (_(" (3) I have done very careful checking.%s\n"),
+ tty_fprintf (fp,
+ _(" (3) I have done very careful checking.%s\n"),
opt.def_cert_level == 3 ? " (default)" : "");
- tty_printf ("\n");
+ tty_fprintf (fp, "\n");
while (class == 0)
{
answer = cpr_get ("sign_uid.class",
_("Your selection? "
"(enter '?' for more information): "));
if (answer[0] == '\0')
class = 0x10 + opt.def_cert_level; /* Default */
else if (ascii_strcasecmp (answer, "0") == 0)
class = 0x10; /* Generic */
else if (ascii_strcasecmp (answer, "1") == 0)
class = 0x11; /* Persona */
else if (ascii_strcasecmp (answer, "2") == 0)
class = 0x12; /* Casual */
else if (ascii_strcasecmp (answer, "3") == 0)
class = 0x13; /* Positive */
else
- tty_printf (_("Invalid selection.\n"));
+ tty_fprintf (fp, _("Invalid selection.\n"));
xfree (answer);
}
}
- if (trust)
+ if (trust && !quick)
trustsig_prompt (&trust_value, &trust_depth, &trust_regexp);
}
- p = get_user_id_native (sk_keyid);
- tty_printf (_("Are you sure that you want to sign this key with your\n"
- "key \"%s\" (%s)\n"), p, keystr_from_pk (pk));
- xfree (p);
+ if (!quick)
+ {
+ p = get_user_id_native (sk_keyid);
+ tty_fprintf (fp,
+ _("Are you sure that you want to sign this key with your\n"
+ "key \"%s\" (%s)\n"), p, keystr_from_pk (pk));
+ xfree (p);
+ }
if (selfsig)
{
- tty_printf ("\n");
- tty_printf (_("This will be a self-signature.\n"));
+ tty_fprintf (fp, "\n");
+ tty_fprintf (fp, _("This will be a self-signature.\n"));
if (local)
{
- tty_printf ("\n");
- tty_printf (_("WARNING: the signature will not be marked "
- "as non-exportable.\n"));
+ tty_fprintf (fp, "\n");
+ tty_fprintf (fp, _("WARNING: the signature will not be marked "
+ "as non-exportable.\n"));
}
if (nonrevocable)
{
- tty_printf ("\n");
- tty_printf (_("WARNING: the signature will not be marked "
- "as non-revocable.\n"));
+ tty_fprintf (fp, "\n");
+ tty_fprintf (fp, _("WARNING: the signature will not be marked "
+ "as non-revocable.\n"));
}
}
else
{
if (local)
{
- tty_printf ("\n");
- tty_printf
- (_("The signature will be marked as non-exportable.\n"));
+ tty_fprintf (fp, "\n");
+ tty_fprintf (fp,
+ _("The signature will be marked as non-exportable.\n"));
}
if (nonrevocable)
{
- tty_printf ("\n");
- tty_printf
- (_("The signature will be marked as non-revocable.\n"));
+ tty_fprintf (fp, "\n");
+ tty_fprintf (fp,
+ _("The signature will be marked as non-revocable.\n"));
}
switch (class)
{
case 0x11:
- tty_printf ("\n");
- tty_printf (_("I have not checked this key at all.\n"));
+ tty_fprintf (fp, "\n");
+ tty_fprintf (fp, _("I have not checked this key at all.\n"));
break;
case 0x12:
- tty_printf ("\n");
- tty_printf (_("I have checked this key casually.\n"));
+ tty_fprintf (fp, "\n");
+ tty_fprintf (fp, _("I have checked this key casually.\n"));
break;
case 0x13:
- tty_printf ("\n");
- tty_printf (_("I have checked this key very carefully.\n"));
+ tty_fprintf (fp, "\n");
+ tty_fprintf (fp, _("I have checked this key very carefully.\n"));
break;
}
}
- tty_printf ("\n");
+ tty_fprintf (fp, "\n");
if (opt.batch && opt.answer_yes)
;
+ else if (quick)
+ ;
else if (!cpr_get_answer_is_yes ("sign_uid.okay",
_("Really sign? (y/N) ")))
continue;
/* Now we can sign the user ids. */
reloop: /* (Must use this, because we are modifing the list.) */
primary_pk = NULL;
for (node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_KEY)
primary_pk = node->pkt->pkt.public_key;
else if (node->pkt->pkttype == PKT_USER_ID
&& (node->flag & NODFLG_MARK_A))
{
PACKET *pkt;
PKT_signature *sig;
struct sign_attrib attrib;
assert (primary_pk);
memset (&attrib, 0, sizeof attrib);
attrib.non_exportable = local;
attrib.non_revocable = nonrevocable;
attrib.trust_depth = trust_depth;
attrib.trust_value = trust_value;
attrib.trust_regexp = trust_regexp;
node->flag &= ~NODFLG_MARK_A;
/* We force creation of a v4 signature for local
* signatures, otherwise we would not generate the
* subpacket with v3 keys and the signature becomes
* exportable. */
if (selfsig)
rc = make_keysig_packet (&sig, primary_pk,
node->pkt->pkt.user_id,
NULL,
pk,
0x13, 0, force_v4 ? 4 : 0, 0, 0,
keygen_add_std_prefs, primary_pk,
NULL);
else
rc = make_keysig_packet (&sig, primary_pk,
node->pkt->pkt.user_id,
NULL,
pk,
class, 0, force_v4 ? 4 : 0,
timestamp, duration,
sign_mk_attrib, &attrib,
NULL);
if (rc)
{
log_error (_("signing failed: %s\n"), g10_errstr (rc));
goto leave;
}
*ret_modified = 1; /* We changed the keyblock. */
update_trust = 1;
pkt = xmalloc_clear (sizeof *pkt);
pkt->pkttype = PKT_SIGNATURE;
pkt->pkt.signature = sig;
insert_kbnode (node, new_kbnode (pkt), PKT_SIGNATURE);
goto reloop;
}
}
/* Delete any sigs that got promoted */
for (node = keyblock; node; node = node->next)
if (node->flag & NODFLG_DELSIG)
delete_kbnode (node);
} /* End loop over signators. */
-leave:
+ leave:
release_sk_list (sk_list);
return rc;
}
/*
* Change the passphrase of the primary and all secondary keys. Note
* that it is common to use only one passphrase for the primary and
* all subkeys. However, this is now (since GnuPG 2.1) all up to the
* gpg-agent. Returns 0 on success or an error code.
*/
static gpg_error_t
change_passphrase (ctrl_t ctrl, kbnode_t keyblock)
{
gpg_error_t err;
kbnode_t node;
PKT_public_key *pk;
int any;
u32 keyid[2], subid[2];
char *hexgrip = NULL;
char *cache_nonce = NULL;
char *passwd_nonce = NULL;
node = find_kbnode (keyblock, PKT_PUBLIC_KEY);
if (!node)
{
log_error ("Oops; public key missing!\n");
err = gpg_error (GPG_ERR_INTERNAL);
goto leave;
}
pk = node->pkt->pkt.public_key;
keyid_from_pk (pk, keyid);
/* Check whether it is likely that we will be able to change the
passphrase for any subkey. */
for (any = 0, node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_KEY
|| node->pkt->pkttype == PKT_PUBLIC_SUBKEY)
{
char *serialno;
pk = node->pkt->pkt.public_key;
keyid_from_pk (pk, subid);
xfree (hexgrip);
err = hexkeygrip_from_pk (pk, &hexgrip);
if (err)
goto leave;
err = agent_get_keyinfo (ctrl, hexgrip, &serialno);
if (!err && serialno)
; /* Key on card. */
else if (gpg_err_code (err) == GPG_ERR_NOT_FOUND)
; /* Maybe stub key. */
else if (!err)
any = 1; /* Key is known. */
else
log_error ("key %s: error getting keyinfo from agent: %s\n",
keystr_with_sub (keyid, subid), gpg_strerror (err));
xfree (serialno);
}
}
err = 0;
if (!any)
{
tty_printf (_("Key has only stub or on-card key items - "
"no passphrase to change.\n"));
goto leave;
}
/* Change the passphrase for all keys. */
for (any = 0, node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_KEY
|| node->pkt->pkttype == PKT_PUBLIC_SUBKEY)
{
char *desc;
pk = node->pkt->pkt.public_key;
keyid_from_pk (pk, subid);
xfree (hexgrip);
err = hexkeygrip_from_pk (pk, &hexgrip);
if (err)
goto leave;
desc = gpg_format_keydesc (pk, 0, 1);
err = agent_passwd (ctrl, hexgrip, desc, &cache_nonce, &passwd_nonce);
xfree (desc);
if (err)
log_log ((gpg_err_code (err) == GPG_ERR_CANCELED
|| gpg_err_code (err) == GPG_ERR_FULLY_CANCELED)
? JNLIB_LOG_INFO : JNLIB_LOG_ERROR,
_("key %s: error changing passphrase: %s\n"),
keystr_with_sub (keyid, subid),
gpg_strerror (err));
if (gpg_err_code (err) == GPG_ERR_FULLY_CANCELED)
break;
}
}
leave:
xfree (hexgrip);
xfree (cache_nonce);
xfree (passwd_nonce);
return err;
}
/*
* There are some keys out (due to a bug in gnupg), where the sequence
* of the packets is wrong. This function fixes that.
* Returns: true if the keyblock has been fixed.
*
* Note: This function does not work if there is more than one user ID.
*/
static int
fix_keyblock (KBNODE keyblock)
{
KBNODE node, last, subkey;
int fixed = 0;
/* Locate key signatures of class 0x10..0x13 behind sub key packets. */
for (subkey = last = NULL, node = keyblock; node;
last = node, node = node->next)
{
switch (node->pkt->pkttype)
{
case PKT_PUBLIC_SUBKEY:
case PKT_SECRET_SUBKEY:
if (!subkey)
subkey = last; /* Actually it is the one before the subkey. */
break;
case PKT_SIGNATURE:
if (subkey)
{
PKT_signature *sig = node->pkt->pkt.signature;
if (sig->sig_class >= 0x10 && sig->sig_class <= 0x13)
{
log_info (_("moving a key signature to the correct place\n"));
last->next = node->next;
node->next = subkey->next;
subkey->next = node;
node = last;
fixed = 1;
}
}
break;
default:
break;
}
}
return fixed;
}
static int
parse_sign_type (const char *str, int *localsig, int *nonrevokesig,
int *trustsig)
{
const char *p = str;
while (*p)
{
if (ascii_strncasecmp (p, "l", 1) == 0)
{
*localsig = 1;
p++;
}
else if (ascii_strncasecmp (p, "nr", 2) == 0)
{
*nonrevokesig = 1;
p += 2;
}
else if (ascii_strncasecmp (p, "t", 1) == 0)
{
*trustsig = 1;
p++;
}
else
return 0;
}
return 1;
}
/*
* Menu driven key editor. If seckey_check is true, then a secret key
* that matches username will be looked for. If it is false, not all
* commands will be available.
*
* Note: to keep track of certain selections we use node->mark MARKBIT_xxxx.
*/
/* Need an SK for this command */
#define KEYEDIT_NEED_SK 1
/* Cannot be viewing the SK for this command */
#define KEYEDIT_NOT_SK 2
/* Must be viewing the SK for this command */
#define KEYEDIT_ONLY_SK 4
/* Match the tail of the string */
#define KEYEDIT_TAIL_MATCH 8
enum cmdids
{
cmdNONE = 0,
cmdQUIT, cmdHELP, cmdFPR, cmdLIST, cmdSELUID, cmdCHECK, cmdSIGN,
cmdREVSIG, cmdREVKEY, cmdREVUID, cmdDELSIG, cmdPRIMARY, cmdDEBUG,
cmdSAVE, cmdADDUID, cmdADDPHOTO, cmdDELUID, cmdADDKEY, cmdDELKEY,
cmdADDREVOKER, cmdTOGGLE, cmdSELKEY, cmdPASSWD, cmdTRUST, cmdPREF,
cmdEXPIRE, cmdBACKSIGN,
#ifndef NO_TRUST_MODELS
cmdENABLEKEY, cmdDISABLEKEY,
#endif /*!NO_TRUST_MODELS*/
cmdSHOWPREF,
cmdSETPREF, cmdPREFKS, cmdNOTATION, cmdINVCMD, cmdSHOWPHOTO, cmdUPDTRUST,
cmdCHKTRUST, cmdADDCARDKEY, cmdKEYTOCARD, cmdBKUPTOCARD, cmdCHECKBKUPKEY,
cmdCLEAN, cmdMINIMIZE, cmdNOP
};
static struct
{
const char *name;
enum cmdids id;
int flags;
const char *desc;
} cmds[] =
{
{ "quit", cmdQUIT, 0, N_("quit this menu")},
{ "q", cmdQUIT, 0, NULL},
{ "save", cmdSAVE, 0, N_("save and quit")},
{ "help", cmdHELP, 0, N_("show this help")},
{ "?", cmdHELP, 0, NULL},
{ "fpr", cmdFPR, 0, N_("show key fingerprint")},
{ "list", cmdLIST, 0, N_("list key and user IDs")},
{ "l", cmdLIST, 0, NULL},
{ "uid", cmdSELUID, 0, N_("select user ID N")},
{ "key", cmdSELKEY, 0, N_("select subkey N")},
{ "check", cmdCHECK, 0, N_("check signatures")},
{ "c", cmdCHECK, 0, NULL},
{ "cross-certify", cmdBACKSIGN, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK, NULL},
{ "backsign", cmdBACKSIGN, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK, NULL},
{ "sign", cmdSIGN, KEYEDIT_NOT_SK | KEYEDIT_TAIL_MATCH,
N_("sign selected user IDs [* see below for related commands]")},
{ "s", cmdSIGN, KEYEDIT_NOT_SK, NULL},
/* "lsign" and friends will never match since "sign" comes first
and it is a tail match. They are just here so they show up in
the help menu. */
{ "lsign", cmdNOP, 0, N_("sign selected user IDs locally")},
{ "tsign", cmdNOP, 0, N_("sign selected user IDs with a trust signature")},
{ "nrsign", cmdNOP, 0,
N_("sign selected user IDs with a non-revocable signature")},
{ "debug", cmdDEBUG, 0, NULL},
{ "adduid", cmdADDUID, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK, N_("add a user ID")},
{ "addphoto", cmdADDPHOTO, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK,
N_("add a photo ID")},
{ "deluid", cmdDELUID, KEYEDIT_NOT_SK, N_("delete selected user IDs")},
/* delphoto is really deluid in disguise */
{ "delphoto", cmdDELUID, KEYEDIT_NOT_SK, NULL},
{ "addkey", cmdADDKEY, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK, N_("add a subkey")},
#ifdef ENABLE_CARD_SUPPORT
{ "addcardkey", cmdADDCARDKEY, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK,
N_("add a key to a smartcard")},
{ "keytocard", cmdKEYTOCARD, KEYEDIT_NEED_SK | KEYEDIT_ONLY_SK,
N_("move a key to a smartcard")},
{ "bkuptocard", cmdBKUPTOCARD, KEYEDIT_NEED_SK | KEYEDIT_ONLY_SK,
N_("move a backup key to a smartcard")},
{ "checkbkupkey", cmdCHECKBKUPKEY, KEYEDIT_NEED_SK | KEYEDIT_ONLY_SK, NULL},
#endif /*ENABLE_CARD_SUPPORT */
{ "delkey", cmdDELKEY, KEYEDIT_NOT_SK, N_("delete selected subkeys")},
{ "addrevoker", cmdADDREVOKER, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK,
N_("add a revocation key")},
{ "delsig", cmdDELSIG, KEYEDIT_NOT_SK,
N_("delete signatures from the selected user IDs")},
{ "expire", cmdEXPIRE, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK,
N_("change the expiration date for the key or selected subkeys")},
{ "primary", cmdPRIMARY, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK,
N_("flag the selected user ID as primary")},
{ "toggle", cmdTOGGLE, KEYEDIT_NEED_SK,
N_("toggle between the secret and public key listings")},
{ "t", cmdTOGGLE, KEYEDIT_NEED_SK, NULL},
{ "pref", cmdPREF, KEYEDIT_NOT_SK, N_("list preferences (expert)")},
{ "showpref", cmdSHOWPREF, KEYEDIT_NOT_SK, N_("list preferences (verbose)")},
{ "setpref", cmdSETPREF, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK,
N_("set preference list for the selected user IDs")},
{ "updpref", cmdSETPREF, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK, NULL},
{ "keyserver", cmdPREFKS, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK,
N_("set the preferred keyserver URL for the selected user IDs")},
{ "notation", cmdNOTATION, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK,
N_("set a notation for the selected user IDs")},
{ "passwd", cmdPASSWD, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK,
N_("change the passphrase")},
{ "password", cmdPASSWD, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK, NULL},
#ifndef NO_TRUST_MODELS
{ "trust", cmdTRUST, KEYEDIT_NOT_SK, N_("change the ownertrust")},
#endif /*!NO_TRUST_MODELS*/
{ "revsig", cmdREVSIG, KEYEDIT_NOT_SK,
N_("revoke signatures on the selected user IDs")},
{ "revuid", cmdREVUID, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK,
N_("revoke selected user IDs")},
{ "revphoto", cmdREVUID, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK, NULL},
{ "revkey", cmdREVKEY, KEYEDIT_NOT_SK | KEYEDIT_NEED_SK,
N_("revoke key or selected subkeys")},
#ifndef NO_TRUST_MODELS
{ "enable", cmdENABLEKEY, KEYEDIT_NOT_SK, N_("enable key")},
{ "disable", cmdDISABLEKEY, KEYEDIT_NOT_SK, N_("disable key")},
#endif /*!NO_TRUST_MODELS*/
{ "showphoto", cmdSHOWPHOTO, 0, N_("show selected photo IDs")},
{ "clean", cmdCLEAN, KEYEDIT_NOT_SK,
N_("compact unusable user IDs and remove unusable signatures from key")},
{ "minimize", cmdMINIMIZE, KEYEDIT_NOT_SK,
N_("compact unusable user IDs and remove all signatures from key")},
{ NULL, cmdNONE, 0, NULL}
};
#ifdef HAVE_LIBREADLINE
/*
These two functions are used by readline for command completion.
*/
static char *
command_generator (const char *text, int state)
{
static int list_index, len;
const char *name;
/* If this is a new word to complete, initialize now. This includes
saving the length of TEXT for efficiency, and initializing the
index variable to 0. */
if (!state)
{
list_index = 0;
len = strlen (text);
}
/* Return the next partial match */
while ((name = cmds[list_index].name))
{
/* Only complete commands that have help text */
if (cmds[list_index++].desc && strncmp (name, text, len) == 0)
return strdup (name);
}
return NULL;
}
static char **
keyedit_completion (const char *text, int start, int end)
{
/* If we are at the start of a line, we try and command-complete.
If not, just do nothing for now. */
(void) end;
if (start == 0)
return rl_completion_matches (text, command_generator);
rl_attempted_completion_over = 1;
return NULL;
}
#endif /* HAVE_LIBREADLINE */
/* Main function of the menu driven key editor. */
void
keyedit_menu (ctrl_t ctrl, const char *username, strlist_t locusr,
strlist_t commands, int quiet, int seckey_check)
{
enum cmdids cmd = 0;
gpg_error_t err = 0;
KBNODE keyblock = NULL;
KEYDB_HANDLE kdbhd = NULL;
int have_seckey = 0;
char *answer = NULL;
int redisplay = 1;
int modified = 0;
int toggle;
int have_commands = !!commands;
if (opt.command_fd != -1)
;
else if (opt.batch && !have_commands)
{
log_error (_("can't do this in batch mode\n"));
goto leave;
}
#ifdef HAVE_W32_SYSTEM
/* Due to Windows peculiarities we need to make sure that the
trustdb stale check is done before we open another file
(i.e. by searching for a key). In theory we could make sure
that the files are closed after use but the open/close caches
inhibits that and flushing the cache right before the stale
check is not easy to implement. Thus we take the easy way out
and run the stale check as early as possible. Note, that for
non- W32 platforms it is run indirectly trough a call to
get_validity (). */
check_trustdb_stale ();
#endif
/* Get the public key */
err = get_pubkey_byname (ctrl, NULL, NULL, username, &keyblock, &kdbhd, 1, 1);
if (err)
{
log_error (_("key \"%s\" not found: %s\n"), username, gpg_strerror (err));
goto leave;
}
if (fix_keyblock (keyblock))
modified++;
if (collapse_uids (&keyblock))
modified++;
reorder_keyblock (keyblock);
/* We modified the keyblock, so let's make sure the flags are
right. */
if (modified)
merge_keys_and_selfsig (keyblock);
/* See whether we have a matching secret key. */
if (seckey_check)
{
have_seckey = !agent_probe_any_secret_key (ctrl, keyblock);
if (have_seckey && !quiet)
tty_printf (_("Secret key is available.\n"));
}
toggle = 0;
/* Main command loop. */
for (;;)
{
int i, arg_number, photo;
const char *arg_string = "";
char *p;
PKT_public_key *pk = keyblock->pkt->pkt.public_key;
tty_printf ("\n");
if (redisplay && !quiet)
{
- show_key_with_all_names (NULL, keyblock, 0, 1, 0, 1, 0);
+ show_key_with_all_names (NULL, keyblock, 0, 1, 0, 1, 0, 0);
tty_printf ("\n");
redisplay = 0;
}
do
{
xfree (answer);
if (have_commands)
{
if (commands)
{
answer = xstrdup (commands->d);
commands = commands->next;
}
else if (opt.batch)
{
answer = xstrdup ("quit");
}
else
have_commands = 0;
}
if (!have_commands)
{
#ifdef HAVE_LIBREADLINE
tty_enable_completion (keyedit_completion);
#endif
answer = cpr_get_no_help ("keyedit.prompt", "gpg> ");
cpr_kill_prompt ();
tty_disable_completion ();
}
trim_spaces (answer);
}
while (*answer == '#');
arg_number = 0; /* Here is the init which egcc complains about. */
photo = 0; /* Same here. */
if (!*answer)
cmd = cmdLIST;
else if (*answer == CONTROL_D)
cmd = cmdQUIT;
else if (digitp (answer))
{
cmd = cmdSELUID;
arg_number = atoi (answer);
}
else
{
if ((p = strchr (answer, ' ')))
{
*p++ = 0;
trim_spaces (answer);
trim_spaces (p);
arg_number = atoi (p);
arg_string = p;
}
for (i = 0; cmds[i].name; i++)
{
if (cmds[i].flags & KEYEDIT_TAIL_MATCH)
{
size_t l = strlen (cmds[i].name);
size_t a = strlen (answer);
if (a >= l)
{
if (!ascii_strcasecmp (&answer[a - l], cmds[i].name))
{
answer[a - l] = '\0';
break;
}
}
}
else if (!ascii_strcasecmp (answer, cmds[i].name))
break;
}
if ((cmds[i].flags & KEYEDIT_NEED_SK) && !have_seckey)
{
tty_printf (_("Need the secret key to do this.\n"));
cmd = cmdNOP;
}
else if (((cmds[i].flags & KEYEDIT_NOT_SK) && have_seckey && toggle)
|| ((cmds[i].flags & KEYEDIT_ONLY_SK) && have_seckey
&& !toggle))
{
tty_printf (_("Please use the command \"toggle\" first.\n"));
cmd = cmdNOP;
}
else
cmd = cmds[i].id;
}
/* Dispatch the command. */
switch (cmd)
{
case cmdHELP:
for (i = 0; cmds[i].name; i++)
{
if ((cmds[i].flags & KEYEDIT_NEED_SK) && !have_seckey)
; /* Skip those item if we do not have the secret key. */
else if (cmds[i].desc)
tty_printf ("%-11s %s\n", cmds[i].name, _(cmds[i].desc));
}
tty_printf ("\n");
tty_printf
(_("* The 'sign' command may be prefixed with an 'l' for local "
"signatures (lsign),\n"
" a 't' for trust signatures (tsign), an 'nr' for "
"non-revocable signatures\n"
" (nrsign), or any combination thereof (ltsign, "
"tnrsign, etc.).\n"));
break;
case cmdLIST:
redisplay = 1;
break;
case cmdFPR:
show_key_and_fingerprint (keyblock);
break;
case cmdSELUID:
if (strlen (arg_string) == NAMEHASH_LEN * 2)
redisplay = menu_select_uid_namehash (keyblock, arg_string);
else
{
if (*arg_string == '*'
&& (!arg_string[1] || spacep (arg_string + 1)))
arg_number = -1; /* Select all. */
redisplay = menu_select_uid (keyblock, arg_number);
}
break;
case cmdSELKEY:
{
if (*arg_string == '*'
&& (!arg_string[1] || spacep (arg_string + 1)))
arg_number = -1; /* Select all. */
if (menu_select_key (keyblock, arg_number))
redisplay = 1;
}
break;
case cmdCHECK:
check_all_keysigs (keyblock, count_selected_uids (keyblock));
break;
case cmdSIGN:
{
int localsig = 0, nonrevokesig = 0, trustsig = 0, interactive = 0;
if (pk->flags.revoked)
{
tty_printf (_("Key is revoked."));
if (opt.expert)
{
tty_printf (" ");
if (!cpr_get_answer_is_yes
("keyedit.sign_revoked.okay",
_("Are you sure you still want to sign it? (y/N) ")))
break;
}
else
{
tty_printf (_(" Unable to sign.\n"));
break;
}
}
if (count_uids (keyblock) > 1 && !count_selected_uids (keyblock)
&& !cpr_get_answer_is_yes ("keyedit.sign_all.okay",
_("Really sign all user IDs?"
" (y/N) ")))
{
if (opt.interactive)
interactive = 1;
else
{
tty_printf (_("Hint: Select the user IDs to sign\n"));
have_commands = 0;
break;
}
}
/* What sort of signing are we doing? */
if (!parse_sign_type
(answer, &localsig, &nonrevokesig, &trustsig))
{
tty_printf (_("Unknown signature type '%s'\n"), answer);
break;
}
- sign_uids (keyblock, locusr, &modified,
- localsig, nonrevokesig, trustsig, interactive);
+ sign_uids (NULL, keyblock, locusr, &modified,
+ localsig, nonrevokesig, trustsig, interactive, 0);
}
break;
case cmdDEBUG:
dump_kbnode (keyblock);
break;
case cmdTOGGLE:
/* The toggle command is a leftover from old gpg versions
where we worked with a secret and a public keyring. It
is not necessary anymore but we keep this command for the
sake of scripts using it. */
toggle = !toggle;
redisplay = 1;
break;
case cmdADDPHOTO:
if (RFC2440 || RFC1991 || PGP2)
{
tty_printf (_("This command is not allowed while in %s mode.\n"),
compliance_option_string ());
break;
}
photo = 1;
/* fall through */
case cmdADDUID:
if (menu_adduid (keyblock, photo, arg_string))
{
update_trust = 1;
redisplay = 1;
modified = 1;
merge_keys_and_selfsig (keyblock);
}
break;
case cmdDELUID:
{
int n1;
if (!(n1 = count_selected_uids (keyblock)))
tty_printf (_("You must select at least one user ID.\n"));
else if (real_uids_left (keyblock) < 1)
tty_printf (_("You can't delete the last user ID!\n"));
else if (cpr_get_answer_is_yes
("keyedit.remove.uid.okay",
n1 > 1 ? _("Really remove all selected user IDs? (y/N) ")
: _("Really remove this user ID? (y/N) ")))
{
menu_deluid (keyblock);
redisplay = 1;
modified = 1;
}
}
break;
case cmdDELSIG:
{
int n1;
if (!(n1 = count_selected_uids (keyblock)))
tty_printf (_("You must select at least one user ID.\n"));
else if (menu_delsig (keyblock))
{
/* No redisplay here, because it may scroll away some
* of the status output of this command. */
modified = 1;
}
}
break;
case cmdADDKEY:
if (!generate_subkeypair (ctrl, keyblock))
{
redisplay = 1;
modified = 1;
merge_keys_and_selfsig (keyblock);
}
break;
#ifdef ENABLE_CARD_SUPPORT
case cmdADDCARDKEY:
if (!card_generate_subkey (keyblock))
{
redisplay = 1;
modified = 1;
merge_keys_and_selfsig (keyblock);
}
break;
case cmdKEYTOCARD:
{
KBNODE node = NULL;
switch (count_selected_keys (keyblock))
{
case 0:
if (cpr_get_answer_is_yes
("keyedit.keytocard.use_primary",
/* TRANSLATORS: Please take care: This is about
moving the key and not about removing it. */
_("Really move the primary key? (y/N) ")))
node = keyblock;
break;
case 1:
for (node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY
&& node->flag & NODFLG_SELKEY)
break;
}
break;
default:
tty_printf (_("You must select exactly one key.\n"));
break;
}
if (node)
{
PKT_public_key *xxpk = node->pkt->pkt.public_key;
if (card_store_subkey (node, xxpk ? xxpk->pubkey_usage : 0))
{
redisplay = 1;
/* Only the secret key has been modified; thus
there is no need to set the modified flag. */
}
}
}
break;
case cmdBKUPTOCARD:
case cmdCHECKBKUPKEY:
log_debug ("FIXME: This needs to be changed\n");
{
/* Ask for a filename, check whether this is really a
backup key as generated by the card generation, parse
that key and store it on card. */
KBNODE node;
const char *fname;
PACKET *pkt;
IOBUF a;
fname = arg_string;
if (!*fname)
{
tty_printf (_("Command expects a filename argument\n"));
break;
}
/* Open that file. */
a = iobuf_open (fname);
if (a && is_secured_file (iobuf_get_fd (a)))
{
iobuf_close (a);
a = NULL;
gpg_err_set_errno (EPERM);
}
if (!a)
{
tty_printf (_("Can't open '%s': %s\n"),
fname, strerror (errno));
break;
}
/* Parse and check that file. */
pkt = xmalloc (sizeof *pkt);
init_packet (pkt);
err = parse_packet (a, pkt);
iobuf_close (a);
iobuf_ioctl (NULL, IOBUF_IOCTL_INVALIDATE_CACHE, 0, (char *) fname);
if (!err && pkt->pkttype != PKT_SECRET_KEY
&& pkt->pkttype != PKT_SECRET_SUBKEY)
err = G10ERR_NO_SECKEY;
if (err)
{
tty_printf (_("Error reading backup key from '%s': %s\n"),
fname, g10_errstr (err));
free_packet (pkt);
xfree (pkt);
break;
}
node = new_kbnode (pkt);
if (cmd == cmdCHECKBKUPKEY)
{
/* PKT_public_key *sk = node->pkt->pkt.secret_key; */
/* switch (is_secret_key_protected (sk)) */
/* { */
/* case 0: /\* Not protected. *\/ */
/* tty_printf (_("This key is not protected.\n")); */
/* break; */
/* case -1: */
/* log_error (_("unknown key protection algorithm\n")); */
/* break; */
/* default: */
/* if (sk->protect.s2k.mode == 1001) */
/* tty_printf (_("Secret parts of key" */
/* " are not available.\n")); */
/* if (sk->protect.s2k.mode == 1002) */
/* tty_printf (_("Secret parts of key" */
/* " are stored on-card.\n")); */
/* else */
/* check_secret_key (sk, 0); */
/* } */
}
else /* Store it. */
{
if (card_store_subkey (node, 0))
{
redisplay = 1;
/* FIXME:sec_modified = 1;*/
}
}
release_kbnode (node);
}
break;
#endif /* ENABLE_CARD_SUPPORT */
case cmdDELKEY:
{
int n1;
if (!(n1 = count_selected_keys (keyblock)))
tty_printf (_("You must select at least one key.\n"));
else if (!cpr_get_answer_is_yes
("keyedit.remove.subkey.okay",
n1 > 1 ? _("Do you really want to delete the "
"selected keys? (y/N) ")
: _("Do you really want to delete this key? (y/N) ")))
;
else
{
menu_delkey (keyblock);
redisplay = 1;
modified = 1;
}
}
break;
case cmdADDREVOKER:
{
int sensitive = 0;
if (ascii_strcasecmp (arg_string, "sensitive") == 0)
sensitive = 1;
if (menu_addrevoker (ctrl, keyblock, sensitive))
{
redisplay = 1;
modified = 1;
merge_keys_and_selfsig (keyblock);
}
}
break;
case cmdREVUID:
{
int n1;
if (!(n1 = count_selected_uids (keyblock)))
tty_printf (_("You must select at least one user ID.\n"));
else if (cpr_get_answer_is_yes
("keyedit.revoke.uid.okay",
n1 > 1 ? _("Really revoke all selected user IDs? (y/N) ")
: _("Really revoke this user ID? (y/N) ")))
{
if (menu_revuid (keyblock))
{
modified = 1;
redisplay = 1;
}
}
}
break;
case cmdREVKEY:
{
int n1;
if (!(n1 = count_selected_keys (keyblock)))
{
if (cpr_get_answer_is_yes ("keyedit.revoke.subkey.okay",
_("Do you really want to revoke"
" the entire key? (y/N) ")))
{
if (menu_revkey (keyblock))
modified = 1;
redisplay = 1;
}
}
else if (cpr_get_answer_is_yes ("keyedit.revoke.subkey.okay",
n1 > 1 ?
_("Do you really want to revoke"
" the selected subkeys? (y/N) ")
: _("Do you really want to revoke"
" this subkey? (y/N) ")))
{
if (menu_revsubkey (keyblock))
modified = 1;
redisplay = 1;
}
if (modified)
merge_keys_and_selfsig (keyblock);
}
break;
case cmdEXPIRE:
if (menu_expire (keyblock))
{
merge_keys_and_selfsig (keyblock);
modified = 1;
redisplay = 1;
}
break;
case cmdBACKSIGN:
if (menu_backsign (keyblock))
{
modified = 1;
redisplay = 1;
}
break;
case cmdPRIMARY:
if (menu_set_primary_uid (keyblock))
{
merge_keys_and_selfsig (keyblock);
modified = 1;
redisplay = 1;
}
break;
case cmdPASSWD:
change_passphrase (ctrl, keyblock);
break;
#ifndef NO_TRUST_MODELS
case cmdTRUST:
if (opt.trust_model == TM_EXTERNAL)
{
tty_printf (_("Owner trust may not be set while "
"using a user provided trust database\n"));
break;
}
- show_key_with_all_names (NULL, keyblock, 0, 0, 0, 1, 0);
+ show_key_with_all_names (NULL, keyblock, 0, 0, 0, 1, 0, 0);
tty_printf ("\n");
if (edit_ownertrust (find_kbnode (keyblock,
PKT_PUBLIC_KEY)->pkt->pkt.
public_key, 1))
{
redisplay = 1;
/* No real need to set update_trust here as
edit_ownertrust() calls revalidation_mark()
anyway. */
update_trust = 1;
}
break;
#endif /*!NO_TRUST_MODELS*/
case cmdPREF:
{
int count = count_selected_uids (keyblock);
assert (keyblock->pkt->pkttype == PKT_PUBLIC_KEY);
show_names (NULL, keyblock, keyblock->pkt->pkt.public_key,
count ? NODFLG_SELUID : 0, 1);
}
break;
case cmdSHOWPREF:
{
int count = count_selected_uids (keyblock);
assert (keyblock->pkt->pkttype == PKT_PUBLIC_KEY);
show_names (NULL, keyblock, keyblock->pkt->pkt.public_key,
count ? NODFLG_SELUID : 0, 2);
}
break;
case cmdSETPREF:
{
PKT_user_id *tempuid;
keygen_set_std_prefs (!*arg_string ? "default" : arg_string, 0);
tempuid = keygen_get_std_prefs ();
tty_printf (_("Set preference list to:\n"));
show_prefs (tempuid, NULL, 1);
free_user_id (tempuid);
if (cpr_get_answer_is_yes
("keyedit.setpref.okay",
count_selected_uids (keyblock) ?
_("Really update the preferences"
" for the selected user IDs? (y/N) ")
: _("Really update the preferences? (y/N) ")))
{
if (menu_set_preferences (keyblock))
{
merge_keys_and_selfsig (keyblock);
modified = 1;
redisplay = 1;
}
}
}
break;
case cmdPREFKS:
if (menu_set_keyserver_url (*arg_string ? arg_string : NULL,
keyblock))
{
merge_keys_and_selfsig (keyblock);
modified = 1;
redisplay = 1;
}
break;
case cmdNOTATION:
if (menu_set_notation (*arg_string ? arg_string : NULL,
keyblock))
{
merge_keys_and_selfsig (keyblock);
modified = 1;
redisplay = 1;
}
break;
case cmdNOP:
break;
case cmdREVSIG:
if (menu_revsig (keyblock))
{
redisplay = 1;
modified = 1;
}
break;
#ifndef NO_TRUST_MODELS
case cmdENABLEKEY:
case cmdDISABLEKEY:
if (enable_disable_key (keyblock, cmd == cmdDISABLEKEY))
{
redisplay = 1;
modified = 1;
}
break;
#endif /*!NO_TRUST_MODELS*/
case cmdSHOWPHOTO:
menu_showphoto (keyblock);
break;
case cmdCLEAN:
if (menu_clean (keyblock, 0))
redisplay = modified = 1;
break;
case cmdMINIMIZE:
if (menu_clean (keyblock, 1))
redisplay = modified = 1;
break;
case cmdQUIT:
if (have_commands)
goto leave;
if (!modified)
goto leave;
if (!cpr_get_answer_is_yes ("keyedit.save.okay",
_("Save changes? (y/N) ")))
{
if (cpr_enabled ()
|| cpr_get_answer_is_yes ("keyedit.cancel.okay",
_("Quit without saving? (y/N) ")))
goto leave;
break;
}
/* fall thru */
case cmdSAVE:
if (modified)
{
err = keydb_update_keyblock (kdbhd, keyblock);
if (err)
{
log_error (_("update failed: %s\n"), g10_errstr (err));
break;
}
}
else
tty_printf (_("Key not changed so no update needed.\n"));
if (update_trust)
{
revalidation_mark ();
update_trust = 0;
}
goto leave;
case cmdINVCMD:
default:
tty_printf ("\n");
tty_printf (_("Invalid command (try \"help\")\n"));
break;
}
} /* End of the main command loop. */
leave:
release_kbnode (keyblock);
keydb_release (kdbhd);
xfree (answer);
}
/* Change the passphrase of the secret key identified by USERNAME. */
void
keyedit_passwd (ctrl_t ctrl, const char *username)
{
gpg_error_t err;
PKT_public_key *pk;
kbnode_t keyblock = NULL;
pk = xtrycalloc (1, sizeof *pk);
if (!pk)
{
err = gpg_error_from_syserror ();
goto leave;
}
err = getkey_byname (NULL, pk, username, 1, &keyblock);
if (err)
goto leave;
err = change_passphrase (ctrl, keyblock);
leave:
release_kbnode (keyblock);
free_public_key (pk);
if (err)
{
log_info ("error changing the passphrase for '%s': %s\n",
username, gpg_strerror (err));
write_status_error ("keyedit.passwd", err);
}
else
write_status_text (STATUS_SUCCESS, "keyedit.passwd");
}
+/* Unattended key signing function. If the key specifified by FPR is
+ availabale and FPR is the primary fingerprint all user ids of the
+ user ids of the key are signed using the default signing key. If
+ UIDS is an empty list all usable UIDs are signed, if it is not
+ empty, only those user ids matching one of the entries of the loist
+ are signed. With LOCAL being true kthe signatures are marked as
+ non-exportable. */
+void
+keyedit_quick_sign (ctrl_t ctrl, const char *fpr, strlist_t uids,
+ strlist_t locusr, int local)
+{
+ gpg_error_t err;
+ kbnode_t keyblock = NULL;
+ KEYDB_HANDLE kdbhd = NULL;
+ int modified = 0;
+ KEYDB_SEARCH_DESC desc;
+ PKT_public_key *pk;
+ kbnode_t node;
+ strlist_t sl;
+ int any;
+
+#ifdef HAVE_W32_SYSTEM
+ /* See keyedit_menu for why we need this. */
+ check_trustdb_stale ();
+#endif
+
+ /* We require a fingerprint because only this uniquely identifies a
+ key and may thus be used to select a key for unattended key
+ signing. */
+ if (classify_user_id (fpr, &desc, 1)
+ || !(desc.mode == KEYDB_SEARCH_MODE_FPR
+ || desc.mode == KEYDB_SEARCH_MODE_FPR16
+ || desc.mode == KEYDB_SEARCH_MODE_FPR20))
+ {
+ log_error (_("\"%s\" is not a fingerprint\n"), fpr);
+ goto leave;
+ }
+ err = get_pubkey_byname (ctrl, NULL, NULL, fpr, &keyblock, &kdbhd, 1, 1);
+ if (err)
+ {
+ log_error (_("key \"%s\" not found: %s\n"), fpr, gpg_strerror (err));
+ goto leave;
+ }
+ if (fix_keyblock (keyblock))
+ modified++;
+ if (collapse_uids (&keyblock))
+ modified++;
+ reorder_keyblock (keyblock);
+
+ /* Check that the primary fingerprint has been given. */
+ {
+ byte fprbin[MAX_FINGERPRINT_LEN];
+ size_t fprlen;
+
+ fingerprint_from_pk (keyblock->pkt->pkt.public_key, fprbin, &fprlen);
+ if (fprlen == 16 && desc.mode == KEYDB_SEARCH_MODE_FPR16
+ && !memcmp (fprbin, desc.u.fpr, 16))
+ ;
+ else if (fprlen == 16 && desc.mode == KEYDB_SEARCH_MODE_FPR
+ && !memcmp (fprbin, desc.u.fpr, 16)
+ && !desc.u.fpr[16]
+ && !desc.u.fpr[17]
+ && !desc.u.fpr[18]
+ && !desc.u.fpr[19])
+ ;
+ else if (fprlen == 20 && (desc.mode == KEYDB_SEARCH_MODE_FPR20
+ || desc.mode == KEYDB_SEARCH_MODE_FPR)
+ && !memcmp (fprbin, desc.u.fpr, 20))
+ ;
+ else
+ {
+ log_error (_("\"%s\" is not the primary fingerprint\n"), fpr);
+ goto leave;
+ }
+ }
+
+ /* If we modified the keyblock, make sure the flags are right. */
+ if (modified)
+ merge_keys_and_selfsig (keyblock);
+
+ /* Give some info in verbose. */
+ if (opt.verbose)
+ {
+ show_key_with_all_names (es_stdout, keyblock, 0,
+ 1/*with_revoker*/, 1/*with_fingerprint*/,
+ 0, 0, 1);
+ es_fflush (es_stdout);
+ }
+
+ pk = keyblock->pkt->pkt.public_key;
+ if (pk->flags.revoked)
+ {
+ if (!opt.verbose)
+ show_key_with_all_names (es_stdout, keyblock, 0, 0, 0, 0, 0, 1);
+ log_error ("%s%s", _("Key is revoked."), _(" Unable to sign.\n"));
+ goto leave;
+ }
+
+ /* Set the flags according to the UIDS list. Fixme: We may want to
+ use classify_user_id along with dedicated compare functions so
+ that we match the same way as in the key lookup. */
+ any = 0;
+ menu_select_uid (keyblock, 0); /* Better clear the flags first. */
+ for (sl=uids; sl; sl = sl->next)
+ {
+ for (node = keyblock; node; node = node->next)
+ {
+ if (node->pkt->pkttype == PKT_USER_ID)
+ {
+ PKT_user_id *uid = node->pkt->pkt.user_id;
+
+ if (!uid->attrib_data
+ && ascii_memistr (uid->name, uid->len, sl->d))
+ {
+ node->flag |= NODFLG_SELUID;
+ any = 1;
+ }
+ }
+ }
+ }
+
+ if (uids && !any)
+ {
+ if (!opt.verbose)
+ show_key_with_all_names (es_stdout, keyblock, 0, 0, 0, 0, 0, 1);
+ es_fflush (es_stdout);
+ log_error ("%s %s", _("No matching user IDs."), _("Nothing to sign.\n"));
+ goto leave;
+ }
+
+ /* Sign. */
+ sign_uids (es_stdout, keyblock, locusr, &modified, local, 0, 0, 0, 1);
+ es_fflush (es_stdout);
+
+ if (modified)
+ {
+ err = keydb_update_keyblock (kdbhd, keyblock);
+ if (err)
+ {
+ log_error (_("update failed: %s\n"), gpg_strerror (err));
+ goto leave;
+ }
+ }
+ else
+ log_info (_("Key not changed so no update needed.\n"));
+
+ if (update_trust)
+ revalidation_mark ();
+
+
+ leave:
+ release_kbnode (keyblock);
+ keydb_release (kdbhd);
+}
+
+
+
static void
tty_print_notations (int indent, PKT_signature * sig)
{
int first = 1;
struct notation *notation, *nd;
if (indent < 0)
{
first = 0;
indent = -indent;
}
notation = sig_to_notation (sig);
for (nd = notation; nd; nd = nd->next)
{
if (!first)
tty_printf ("%*s", indent, "");
else
first = 0;
tty_print_utf8_string (nd->name, strlen (nd->name));
tty_printf ("=");
tty_print_utf8_string (nd->value, strlen (nd->value));
tty_printf ("\n");
}
free_notation (notation);
}
/*
* Show preferences of a public keyblock.
*/
static void
show_prefs (PKT_user_id * uid, PKT_signature * selfsig, int verbose)
{
const prefitem_t fake = { 0, 0 };
const prefitem_t *prefs;
int i;
if (!uid)
return;
if (uid->prefs)
prefs = uid->prefs;
else if (verbose)
prefs = &fake;
else
return;
if (verbose)
{
int any, des_seen = 0, sha1_seen = 0, uncomp_seen = 0;
tty_printf (" ");
tty_printf (_("Cipher: "));
for (i = any = 0; prefs[i].type; i++)
{
if (prefs[i].type == PREFTYPE_SYM)
{
if (any)
tty_printf (", ");
any = 1;
/* We don't want to display strings for experimental algos */
if (!openpgp_cipher_test_algo (prefs[i].value)
&& prefs[i].value < 100)
tty_printf ("%s", openpgp_cipher_algo_name (prefs[i].value));
else
tty_printf ("[%d]", prefs[i].value);
if (prefs[i].value == CIPHER_ALGO_3DES)
des_seen = 1;
}
}
if (!des_seen)
{
if (any)
tty_printf (", ");
tty_printf ("%s", openpgp_cipher_algo_name (CIPHER_ALGO_3DES));
}
tty_printf ("\n ");
tty_printf (_("Digest: "));
for (i = any = 0; prefs[i].type; i++)
{
if (prefs[i].type == PREFTYPE_HASH)
{
if (any)
tty_printf (", ");
any = 1;
/* We don't want to display strings for experimental algos */
if (!gcry_md_test_algo (prefs[i].value) && prefs[i].value < 100)
tty_printf ("%s", gcry_md_algo_name (prefs[i].value));
else
tty_printf ("[%d]", prefs[i].value);
if (prefs[i].value == DIGEST_ALGO_SHA1)
sha1_seen = 1;
}
}
if (!sha1_seen)
{
if (any)
tty_printf (", ");
tty_printf ("%s", gcry_md_algo_name (DIGEST_ALGO_SHA1));
}
tty_printf ("\n ");
tty_printf (_("Compression: "));
for (i = any = 0; prefs[i].type; i++)
{
if (prefs[i].type == PREFTYPE_ZIP)
{
const char *s = compress_algo_to_string (prefs[i].value);
if (any)
tty_printf (", ");
any = 1;
/* We don't want to display strings for experimental algos */
if (s && prefs[i].value < 100)
tty_printf ("%s", s);
else
tty_printf ("[%d]", prefs[i].value);
if (prefs[i].value == COMPRESS_ALGO_NONE)
uncomp_seen = 1;
}
}
if (!uncomp_seen)
{
if (any)
tty_printf (", ");
else
{
tty_printf ("%s", compress_algo_to_string (COMPRESS_ALGO_ZIP));
tty_printf (", ");
}
tty_printf ("%s", compress_algo_to_string (COMPRESS_ALGO_NONE));
}
if (uid->flags.mdc || !uid->flags.ks_modify)
{
tty_printf ("\n ");
tty_printf (_("Features: "));
any = 0;
if (uid->flags.mdc)
{
tty_printf ("MDC");
any = 1;
}
if (!uid->flags.ks_modify)
{
if (any)
tty_printf (", ");
tty_printf (_("Keyserver no-modify"));
}
}
tty_printf ("\n");
if (selfsig)
{
const byte *pref_ks;
size_t pref_ks_len;
pref_ks = parse_sig_subpkt (selfsig->hashed,
SIGSUBPKT_PREF_KS, &pref_ks_len);
if (pref_ks && pref_ks_len)
{
tty_printf (" ");
tty_printf (_("Preferred keyserver: "));
tty_print_utf8_string (pref_ks, pref_ks_len);
tty_printf ("\n");
}
if (selfsig->flags.notation)
{
tty_printf (" ");
tty_printf (_("Notations: "));
tty_print_notations (5 + strlen (_("Notations: ")), selfsig);
}
}
}
else
{
tty_printf (" ");
for (i = 0; prefs[i].type; i++)
{
tty_printf (" %c%d", prefs[i].type == PREFTYPE_SYM ? 'S' :
prefs[i].type == PREFTYPE_HASH ? 'H' :
prefs[i].type == PREFTYPE_ZIP ? 'Z' : '?',
prefs[i].value);
}
if (uid->flags.mdc)
tty_printf (" [mdc]");
if (!uid->flags.ks_modify)
tty_printf (" [no-ks-modify]");
tty_printf ("\n");
}
}
/* This is the version of show_key_with_all_names used when
opt.with_colons is used. It prints all available data in a easy to
parse format and does not translate utf8 */
static void
show_key_with_all_names_colon (estream_t fp, kbnode_t keyblock)
{
KBNODE node;
int i, j, ulti_hack = 0;
byte pk_version = 0;
PKT_public_key *primary = NULL;
if (!fp)
fp = es_stdout;
/* the keys */
for (node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_KEY
|| (node->pkt->pkttype == PKT_PUBLIC_SUBKEY))
{
PKT_public_key *pk = node->pkt->pkt.public_key;
u32 keyid[2];
if (node->pkt->pkttype == PKT_PUBLIC_KEY)
{
pk_version = pk->version;
primary = pk;
}
keyid_from_pk (pk, keyid);
es_fputs (node->pkt->pkttype == PKT_PUBLIC_KEY ? "pub:" : "sub:",
fp);
if (!pk->flags.valid)
es_putc ('i', fp);
else if (pk->flags.revoked)
es_putc ('r', fp);
else if (pk->has_expired)
es_putc ('e', fp);
else if (!(opt.fast_list_mode || opt.no_expensive_trust_checks))
{
int trust = get_validity_info (pk, NULL);
if (trust == 'u')
ulti_hack = 1;
es_putc (trust, fp);
}
es_fprintf (fp, ":%u:%d:%08lX%08lX:%lu:%lu::",
nbits_from_pk (pk),
pk->pubkey_algo,
(ulong) keyid[0], (ulong) keyid[1],
(ulong) pk->timestamp, (ulong) pk->expiredate);
if (node->pkt->pkttype == PKT_PUBLIC_KEY
&& !(opt.fast_list_mode || opt.no_expensive_trust_checks))
es_putc (get_ownertrust_info (pk), fp);
es_putc (':', fp);
es_putc (':', fp);
es_putc (':', fp);
/* Print capabilities. */
if ((pk->pubkey_usage & PUBKEY_USAGE_ENC))
es_putc ('e', fp);
if ((pk->pubkey_usage & PUBKEY_USAGE_SIG))
es_putc ('s', fp);
if ((pk->pubkey_usage & PUBKEY_USAGE_CERT))
es_putc ('c', fp);
if ((pk->pubkey_usage & PUBKEY_USAGE_AUTH))
es_putc ('a', fp);
es_putc ('\n', fp);
print_fingerprint (fp, pk, 0);
print_revokers (fp, pk);
}
}
/* the user ids */
i = 0;
for (node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_USER_ID)
{
PKT_user_id *uid = node->pkt->pkt.user_id;
++i;
if (uid->attrib_data)
es_fputs ("uat:", fp);
else
es_fputs ("uid:", fp);
if (uid->is_revoked)
es_fputs ("r::::::::", fp);
else if (uid->is_expired)
es_fputs ("e::::::::", fp);
else if (opt.fast_list_mode || opt.no_expensive_trust_checks)
es_fputs ("::::::::", fp);
else
{
int uid_validity;
if (primary && !ulti_hack)
uid_validity = get_validity_info (primary, uid);
else
uid_validity = 'u';
es_fprintf (fp, "%c::::::::", uid_validity);
}
if (uid->attrib_data)
es_fprintf (fp, "%u %lu", uid->numattribs, uid->attrib_len);
else
es_write_sanitized (fp, uid->name, uid->len, ":", NULL);
es_putc (':', fp);
/* signature class */
es_putc (':', fp);
/* capabilities */
es_putc (':', fp);
/* preferences */
if (pk_version > 3 || uid->selfsigversion > 3)
{
const prefitem_t *prefs = uid->prefs;
for (j = 0; prefs && prefs[j].type; j++)
{
if (j)
es_putc (' ', fp);
es_fprintf (fp,
"%c%d", prefs[j].type == PREFTYPE_SYM ? 'S' :
prefs[j].type == PREFTYPE_HASH ? 'H' :
prefs[j].type == PREFTYPE_ZIP ? 'Z' : '?',
prefs[j].value);
}
if (uid->flags.mdc)
es_fputs (",mdc", fp);
if (!uid->flags.ks_modify)
es_fputs (",no-ks-modify", fp);
}
es_putc (':', fp);
/* flags */
es_fprintf (fp, "%d,", i);
if (uid->is_primary)
es_putc ('p', fp);
if (uid->is_revoked)
es_putc ('r', fp);
if (uid->is_expired)
es_putc ('e', fp);
if ((node->flag & NODFLG_SELUID))
es_putc ('s', fp);
if ((node->flag & NODFLG_MARK_A))
es_putc ('m', fp);
es_putc (':', fp);
es_putc ('\n', fp);
}
}
}
static void
show_names (estream_t fp,
KBNODE keyblock, PKT_public_key * pk, unsigned int flag,
int with_prefs)
{
KBNODE node;
int i = 0;
for (node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_USER_ID && !is_deleted_kbnode (node))
{
PKT_user_id *uid = node->pkt->pkt.user_id;
++i;
if (!flag || (flag && (node->flag & flag)))
{
if (!(flag & NODFLG_MARK_A) && pk)
tty_fprintf (fp, "%s ", uid_trust_string_fixed (pk, uid));
if (flag & NODFLG_MARK_A)
tty_fprintf (fp, " ");
else if (node->flag & NODFLG_SELUID)
tty_fprintf (fp, "(%d)* ", i);
else if (uid->is_primary)
tty_fprintf (fp, "(%d). ", i);
else
tty_fprintf (fp, "(%d) ", i);
tty_print_utf8_string2 (fp, uid->name, uid->len, 0);
tty_fprintf (fp, "\n");
if (with_prefs && pk)
{
if (pk->version > 3 || uid->selfsigversion > 3)
{
PKT_signature *selfsig = NULL;
KBNODE signode;
for (signode = node->next;
signode && signode->pkt->pkttype == PKT_SIGNATURE;
signode = signode->next)
{
if (signode->pkt->pkt.signature->
flags.chosen_selfsig)
{
selfsig = signode->pkt->pkt.signature;
break;
}
}
show_prefs (uid, selfsig, with_prefs == 2);
}
else
tty_fprintf (fp, _("There are no preferences on a"
" PGP 2.x-style user ID.\n"));
}
}
}
}
}
/*
* Display the key a the user ids, if only_marked is true, do only so
* for user ids with mark A flag set and do not display the index
* number. If FP is not NULL print to the given stream and not to the
* tty (ignored in with-colons mode).
*/
static void
show_key_with_all_names (estream_t fp,
KBNODE keyblock, int only_marked, int with_revoker,
- int with_fpr, int with_subkeys, int with_prefs)
+ int with_fpr, int with_subkeys, int with_prefs,
+ int nowarn)
{
KBNODE node;
int i;
int do_warn = 0;
PKT_public_key *primary = NULL;
char pkstrbuf[PUBKEY_STRING_SIZE];
if (opt.with_colons)
{
show_key_with_all_names_colon (fp, keyblock);
return;
}
/* the keys */
for (node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_KEY
|| (with_subkeys && node->pkt->pkttype == PKT_PUBLIC_SUBKEY
&& !is_deleted_kbnode (node)))
{
PKT_public_key *pk = node->pkt->pkt.public_key;
const char *otrust = "err";
const char *trust = "err";
if (node->pkt->pkttype == PKT_PUBLIC_KEY)
{
/* do it here, so that debug messages don't clutter the
* output */
static int did_warn = 0;
trust = get_validity_string (pk, NULL);
otrust = get_ownertrust_string (pk);
/* Show a warning once */
if (!did_warn
&& (get_validity (pk, NULL) & TRUST_FLAG_PENDING_CHECK))
{
did_warn = 1;
do_warn = 1;
}
primary = pk;
}
if (pk->flags.revoked)
{
char *user = get_user_id_string_native (pk->revoked.keyid);
tty_fprintf (fp,
_("The following key was revoked on"
" %s by %s key %s\n"),
revokestr_from_pk (pk),
gcry_pk_algo_name (pk->revoked.algo), user);
xfree (user);
}
if (with_revoker)
{
if (!pk->revkey && pk->numrevkeys)
BUG ();
else
for (i = 0; i < pk->numrevkeys; i++)
{
u32 r_keyid[2];
char *user;
const char *algo;
algo = gcry_pk_algo_name (pk->revkey[i].algid);
keyid_from_fingerprint (pk->revkey[i].fpr,
MAX_FINGERPRINT_LEN, r_keyid);
user = get_user_id_string_native (r_keyid);
tty_fprintf (fp,
_("This key may be revoked by %s key %s"),
algo ? algo : "?", user);
if (pk->revkey[i].class & 0x40)
{
tty_fprintf (fp, " ");
tty_fprintf (fp, _("(sensitive)"));
}
tty_fprintf (fp, "\n");
xfree (user);
}
}
keyid_from_pk (pk, NULL);
tty_fprintf (fp, "%s%c %s/%s",
node->pkt->pkttype == PKT_PUBLIC_KEY ? "pub" :
node->pkt->pkttype == PKT_PUBLIC_SUBKEY ? "sub" :
node->pkt->pkttype == PKT_SECRET_KEY ? "sec" : "ssb",
(node->flag & NODFLG_SELKEY) ? '*' : ' ',
pubkey_string (pk, pkstrbuf, sizeof pkstrbuf),
keystr (pk->keyid));
if (opt.legacy_list_mode)
tty_fprintf (fp, " ");
else
tty_fprintf (fp, "\n ");
tty_fprintf (fp, _("created: %s"), datestr_from_pk (pk));
tty_fprintf (fp, " ");
if (pk->flags.revoked)
tty_fprintf (fp, _("revoked: %s"), revokestr_from_pk (pk));
else if (pk->has_expired)
tty_fprintf (fp, _("expired: %s"), expirestr_from_pk (pk));
else
tty_fprintf (fp, _("expires: %s"), expirestr_from_pk (pk));
tty_fprintf (fp, " ");
tty_fprintf (fp, _("usage: %s"), usagestr_from_pk (pk));
tty_fprintf (fp, "\n");
if (pk->seckey_info
&& pk->seckey_info->is_protected
&& pk->seckey_info->s2k.mode == 1002)
{
tty_fprintf (fp, "%*s%s", opt.legacy_list_mode? 21:5, "",
_("card-no: "));
if (pk->seckey_info->ivlen == 16
&& !memcmp (pk->seckey_info->iv,
"\xD2\x76\x00\x01\x24\x01", 6))
{
/* This is an OpenPGP card. */
for (i = 8; i < 14; i++)
{
if (i == 10)
tty_fprintf (fp, " ");
tty_fprintf (fp, "%02X", pk->seckey_info->iv[i]);
}
}
else
{
/* Unknown card: Print all. */
for (i = 0; i < pk->seckey_info->ivlen; i++)
tty_fprintf (fp, "%02X", pk->seckey_info->iv[i]);
}
tty_fprintf (fp, "\n");
}
if (node->pkt->pkttype == PKT_PUBLIC_KEY
|| node->pkt->pkttype == PKT_SECRET_KEY)
{
if (opt.trust_model != TM_ALWAYS)
{
tty_fprintf (fp, "%*s",
opt.legacy_list_mode?
((int) keystrlen () + 13):5, "");
/* Ownertrust is only meaningful for the PGP or
classic trust models */
if (opt.trust_model == TM_PGP
|| opt.trust_model == TM_CLASSIC)
{
int width = 14 - strlen (otrust);
if (width <= 0)
width = 1;
tty_fprintf (fp, _("trust: %s"), otrust);
tty_fprintf (fp, "%*s", width, "");
}
tty_fprintf (fp, _("validity: %s"), trust);
tty_fprintf (fp, "\n");
}
if (node->pkt->pkttype == PKT_PUBLIC_KEY
&& (get_ownertrust (pk) & TRUST_FLAG_DISABLED))
{
tty_fprintf (fp, "*** ");
tty_fprintf (fp, _("This key has been disabled"));
tty_fprintf (fp, "\n");
}
}
if ((node->pkt->pkttype == PKT_PUBLIC_KEY
|| node->pkt->pkttype == PKT_SECRET_KEY) && with_fpr)
{
print_fingerprint (fp, pk, 2);
tty_fprintf (fp, "\n");
}
}
}
show_names (fp,
keyblock, primary, only_marked ? NODFLG_MARK_A : 0, with_prefs);
- if (do_warn)
+ if (do_warn && !nowarn)
tty_fprintf (fp, _("Please note that the shown key validity"
" is not necessarily correct\n"
"unless you restart the program.\n"));
}
/* Display basic key information. This function is suitable to show
information on the key without any dependencies on the trustdb or
any other internal GnuPG stuff. KEYBLOCK may either be a public or
a secret key.*/
void
show_basic_key_info (KBNODE keyblock)
{
KBNODE node;
int i;
char pkstrbuf[PUBKEY_STRING_SIZE];
/* The primary key */
for (node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_KEY
|| node->pkt->pkttype == PKT_SECRET_KEY)
{
PKT_public_key *pk = node->pkt->pkt.public_key;
/* Note, we use the same format string as in other show
functions to make the translation job easier. */
tty_printf ("%s %s/%s ",
node->pkt->pkttype == PKT_PUBLIC_KEY ? "pub" :
node->pkt->pkttype == PKT_PUBLIC_SUBKEY ? "sub" :
node->pkt->pkttype == PKT_SECRET_KEY ? "sec" :"ssb",
pubkey_string (pk, pkstrbuf, sizeof pkstrbuf),
keystr_from_pk (pk));
tty_printf (_("created: %s"), datestr_from_pk (pk));
tty_printf (" ");
tty_printf (_("expires: %s"), expirestr_from_pk (pk));
tty_printf ("\n");
print_fingerprint (NULL, pk, 3);
tty_printf ("\n");
}
}
/* The user IDs. */
for (i = 0, node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_USER_ID)
{
PKT_user_id *uid = node->pkt->pkt.user_id;
++i;
tty_printf (" ");
if (uid->is_revoked)
tty_printf ("[%s] ", _("revoked"));
else if (uid->is_expired)
tty_printf ("[%s] ", _("expired"));
tty_print_utf8_string (uid->name, uid->len);
tty_printf ("\n");
}
}
}
static void
show_key_and_fingerprint (KBNODE keyblock)
{
KBNODE node;
PKT_public_key *pk = NULL;
char pkstrbuf[PUBKEY_STRING_SIZE];
for (node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_KEY)
{
pk = node->pkt->pkt.public_key;
tty_printf ("pub %s/%s %s ",
pubkey_string (pk, pkstrbuf, sizeof pkstrbuf),
keystr_from_pk(pk),
datestr_from_pk (pk));
}
else if (node->pkt->pkttype == PKT_USER_ID)
{
PKT_user_id *uid = node->pkt->pkt.user_id;
tty_print_utf8_string (uid->name, uid->len);
break;
}
}
tty_printf ("\n");
if (pk)
print_fingerprint (NULL, pk, 2);
}
/* Show a warning if no uids on the key have the primary uid flag
set. */
static void
no_primary_warning (KBNODE keyblock)
{
KBNODE node;
int have_primary = 0, uid_count = 0;
/* TODO: if we ever start behaving differently with a primary or
non-primary attribute ID, we will need to check for attributes
here as well. */
for (node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_USER_ID
&& node->pkt->pkt.user_id->attrib_data == NULL)
{
uid_count++;
if (node->pkt->pkt.user_id->is_primary == 2)
{
have_primary = 1;
break;
}
}
}
if (uid_count > 1 && !have_primary)
log_info (_
("WARNING: no user ID has been marked as primary. This command"
" may\n cause a different user ID to become"
" the assumed primary.\n"));
}
/*
* Ask for a new user id, add the self-signature and update the keyblock.
* Return true if there is a new user id
*/
static int
menu_adduid (KBNODE pub_keyblock, int photo, const char *photo_name)
{
PKT_user_id *uid;
PKT_public_key *pk = NULL;
PKT_signature *sig = NULL;
PACKET *pkt;
KBNODE node;
KBNODE pub_where = NULL;
gpg_error_t err;
for (node = pub_keyblock; node; pub_where = node, node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_KEY)
pk = node->pkt->pkt.public_key;
else if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY)
break;
}
if (!node) /* No subkey. */
pub_where = NULL;
assert (pk);
if (photo)
{
int hasattrib = 0;
for (node = pub_keyblock; node; node = node->next)
if (node->pkt->pkttype == PKT_USER_ID &&
node->pkt->pkt.user_id->attrib_data != NULL)
{
hasattrib = 1;
break;
}
/* It is legal but bad for compatibility to add a photo ID to a
v3 key as it means that PGP2 will not be able to use that key
anymore. Also, PGP may not expect a photo on a v3 key.
Don't bother to ask this if the key already has a photo - any
damage has already been done at that point. -dms */
if (pk->version == 3 && !hasattrib)
{
if (opt.expert)
{
tty_printf (_("WARNING: This is a PGP2-style key. "
"Adding a photo ID may cause some versions\n"
" of PGP to reject this key.\n"));
if (!cpr_get_answer_is_yes ("keyedit.v3_photo.okay",
_("Are you sure you still want "
"to add it? (y/N) ")))
return 0;
}
else
{
tty_printf (_("You may not add a photo ID to "
"a PGP2-style key.\n"));
return 0;
}
}
uid = generate_photo_id (pk, photo_name);
}
else
uid = generate_user_id (pub_keyblock);
if (!uid)
return 0;
err = make_keysig_packet (&sig, pk, uid, NULL, pk, 0x13, 0, 0, 0, 0,
keygen_add_std_prefs, pk, NULL);
if (err)
{
log_error ("signing failed: %s\n", g10_errstr (err));
free_user_id (uid);
return 0;
}
/* Insert/append to public keyblock */
pkt = xmalloc_clear (sizeof *pkt);
pkt->pkttype = PKT_USER_ID;
pkt->pkt.user_id = uid;
node = new_kbnode (pkt);
if (pub_where)
insert_kbnode (pub_where, node, 0);
else
add_kbnode (pub_keyblock, node);
pkt = xmalloc_clear (sizeof *pkt);
pkt->pkttype = PKT_SIGNATURE;
pkt->pkt.signature = copy_signature (NULL, sig);
if (pub_where)
insert_kbnode (node, new_kbnode (pkt), 0);
else
add_kbnode (pub_keyblock, new_kbnode (pkt));
return 1;
}
/*
* Remove all selected userids from the keyring
*/
static void
menu_deluid (KBNODE pub_keyblock)
{
KBNODE node;
int selected = 0;
for (node = pub_keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_USER_ID)
{
selected = node->flag & NODFLG_SELUID;
if (selected)
{
/* Only cause a trust update if we delete a
non-revoked user id */
if (!node->pkt->pkt.user_id->is_revoked)
update_trust = 1;
delete_kbnode (node);
}
}
else if (selected && node->pkt->pkttype == PKT_SIGNATURE)
delete_kbnode (node);
else if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY)
selected = 0;
}
commit_kbnode (&pub_keyblock);
}
static int
menu_delsig (KBNODE pub_keyblock)
{
KBNODE node;
PKT_user_id *uid = NULL;
int changed = 0;
for (node = pub_keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_USER_ID)
{
uid = (node->flag & NODFLG_SELUID) ? node->pkt->pkt.user_id : NULL;
}
else if (uid && node->pkt->pkttype == PKT_SIGNATURE)
{
int okay, valid, selfsig, inv_sig, no_key, other_err;
tty_printf ("uid ");
tty_print_utf8_string (uid->name, uid->len);
tty_printf ("\n");
okay = inv_sig = no_key = other_err = 0;
if (opt.with_colons)
valid = print_and_check_one_sig_colon (pub_keyblock, node,
&inv_sig, &no_key,
&other_err, &selfsig, 1);
else
valid = print_and_check_one_sig (pub_keyblock, node,
&inv_sig, &no_key, &other_err,
&selfsig, 1);
if (valid)
{
okay = cpr_get_answer_yes_no_quit
("keyedit.delsig.valid",
_("Delete this good signature? (y/N/q)"));
/* Only update trust if we delete a good signature.
The other two cases do not affect trust. */
if (okay)
update_trust = 1;
}
else if (inv_sig || other_err)
okay = cpr_get_answer_yes_no_quit
("keyedit.delsig.invalid",
_("Delete this invalid signature? (y/N/q)"));
else if (no_key)
okay = cpr_get_answer_yes_no_quit
("keyedit.delsig.unknown",
_("Delete this unknown signature? (y/N/q)"));
if (okay == -1)
break;
if (okay && selfsig
&& !cpr_get_answer_is_yes
("keyedit.delsig.selfsig",
_("Really delete this self-signature? (y/N)")))
okay = 0;
if (okay)
{
delete_kbnode (node);
changed++;
}
}
else if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY)
uid = NULL;
}
if (changed)
{
commit_kbnode (&pub_keyblock);
tty_printf (changed == 1 ? _("Deleted %d signature.\n")
: _("Deleted %d signatures.\n"), changed);
}
else
tty_printf (_("Nothing deleted.\n"));
return changed;
}
static int
menu_clean (KBNODE keyblock, int self_only)
{
KBNODE uidnode;
int modified = 0, select_all = !count_selected_uids (keyblock);
for (uidnode = keyblock->next;
uidnode && uidnode->pkt->pkttype != PKT_PUBLIC_SUBKEY;
uidnode = uidnode->next)
{
if (uidnode->pkt->pkttype == PKT_USER_ID
&& (uidnode->flag & NODFLG_SELUID || select_all))
{
int uids = 0, sigs = 0;
char *user = utf8_to_native (uidnode->pkt->pkt.user_id->name,
uidnode->pkt->pkt.user_id->len,
0);
clean_one_uid (keyblock, uidnode, opt.verbose, self_only, &uids,
&sigs);
if (uids)
{
const char *reason;
if (uidnode->pkt->pkt.user_id->is_revoked)
reason = _("revoked");
else if (uidnode->pkt->pkt.user_id->is_expired)
reason = _("expired");
else
reason = _("invalid");
tty_printf (_("User ID \"%s\" compacted: %s\n"), user, reason);
modified = 1;
}
else if (sigs)
{
tty_printf (sigs == 1 ?
_("User ID \"%s\": %d signature removed\n") :
_("User ID \"%s\": %d signatures removed\n"),
user, sigs);
modified = 1;
}
else
{
tty_printf (self_only == 1 ?
_("User ID \"%s\": already minimized\n") :
_("User ID \"%s\": already clean\n"), user);
}
xfree (user);
}
}
return modified;
}
/*
* Remove some of the secondary keys
*/
static void
menu_delkey (KBNODE pub_keyblock)
{
KBNODE node;
int selected = 0;
for (node = pub_keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY)
{
selected = node->flag & NODFLG_SELKEY;
if (selected)
delete_kbnode (node);
}
else if (selected && node->pkt->pkttype == PKT_SIGNATURE)
delete_kbnode (node);
else
selected = 0;
}
commit_kbnode (&pub_keyblock);
/* No need to set update_trust here since signing keys are no
longer used to certify other keys, so there is no change in
trust when revoking/removing them. */
}
/*
* Ask for a new revoker, create the self-signature and put it into
* the keyblock. Returns true if there is a new revoker.
*/
static int
menu_addrevoker (ctrl_t ctrl, kbnode_t pub_keyblock, int sensitive)
{
PKT_public_key *pk = NULL;
PKT_public_key *revoker_pk = NULL;
PKT_signature *sig = NULL;
PACKET *pkt;
struct revocation_key revkey;
size_t fprlen;
int rc;
assert (pub_keyblock->pkt->pkttype == PKT_PUBLIC_KEY);
pk = pub_keyblock->pkt->pkt.public_key;
if (pk->numrevkeys == 0 && pk->version == 3)
{
/* It is legal but bad for compatibility to add a revoker to a
v3 key as it means that PGP2 will not be able to use that key
anymore. Also, PGP may not expect a revoker on a v3 key.
Don't bother to ask this if the key already has a revoker -
any damage has already been done at that point. -dms */
if (opt.expert)
{
tty_printf (_("WARNING: This is a PGP 2.x-style key. "
"Adding a designated revoker may cause\n"
" some versions of PGP to reject this key.\n"));
if (!cpr_get_answer_is_yes ("keyedit.v3_revoker.okay",
_("Are you sure you still want "
"to add it? (y/N) ")))
return 0;
}
else
{
tty_printf (_("You may not add a designated revoker to "
"a PGP 2.x-style key.\n"));
return 0;
}
}
for (;;)
{
char *answer;
free_public_key (revoker_pk);
revoker_pk = xmalloc_clear (sizeof (*revoker_pk));
tty_printf ("\n");
answer = cpr_get_utf8
("keyedit.add_revoker",
_("Enter the user ID of the designated revoker: "));
if (answer[0] == '\0' || answer[0] == CONTROL_D)
{
xfree (answer);
goto fail;
}
/* Note that I'm requesting CERT here, which usually implies
primary keys only, but some casual testing shows that PGP and
GnuPG both can handle a designated revocation from a subkey. */
revoker_pk->req_usage = PUBKEY_USAGE_CERT;
rc = get_pubkey_byname (ctrl, NULL, revoker_pk, answer, NULL, NULL, 1, 1);
if (rc)
{
log_error (_("key \"%s\" not found: %s\n"), answer,
g10_errstr (rc));
xfree (answer);
continue;
}
xfree (answer);
fingerprint_from_pk (revoker_pk, revkey.fpr, &fprlen);
if (fprlen != 20)
{
log_error (_("cannot appoint a PGP 2.x style key as a "
"designated revoker\n"));
continue;
}
revkey.class = 0x80;
if (sensitive)
revkey.class |= 0x40;
revkey.algid = revoker_pk->pubkey_algo;
if (cmp_public_keys (revoker_pk, pk) == 0)
{
/* This actually causes no harm (after all, a key that
designates itself as a revoker is the same as a
regular key), but it's easy enough to check. */
log_error (_("you cannot appoint a key as its own "
"designated revoker\n"));
continue;
}
keyid_from_pk (pk, NULL);
/* Does this revkey already exist? */
if (!pk->revkey && pk->numrevkeys)
BUG ();
else
{
int i;
for (i = 0; i < pk->numrevkeys; i++)
{
if (memcmp (&pk->revkey[i], &revkey,
sizeof (struct revocation_key)) == 0)
{
char buf[50];
log_error (_("this key has already been designated "
"as a revoker\n"));
sprintf (buf, "%08lX%08lX",
(ulong) pk->keyid[0], (ulong) pk->keyid[1]);
write_status_text (STATUS_ALREADY_SIGNED, buf);
break;
}
}
if (i < pk->numrevkeys)
continue;
}
print_pubkey_info (NULL, revoker_pk);
print_fingerprint (NULL, revoker_pk, 2);
tty_printf ("\n");
tty_printf (_("WARNING: appointing a key as a designated revoker "
"cannot be undone!\n"));
tty_printf ("\n");
if (!cpr_get_answer_is_yes ("keyedit.add_revoker.okay",
_("Are you sure you want to appoint this "
"key as a designated revoker? (y/N) ")))
continue;
free_public_key (revoker_pk);
revoker_pk = NULL;
break;
}
/* The 1F signature must be at least v4 to carry the revocation key
subpacket. */
rc = make_keysig_packet (&sig, pk, NULL, NULL, pk, 0x1F, 0, 4, 0, 0,
keygen_add_revkey, &revkey, NULL);
if (rc)
{
log_error ("signing failed: %s\n", g10_errstr (rc));
goto fail;
}
/* Insert into public keyblock. */
pkt = xmalloc_clear (sizeof *pkt);
pkt->pkttype = PKT_SIGNATURE;
pkt->pkt.signature = sig;
insert_kbnode (pub_keyblock, new_kbnode (pkt), PKT_SIGNATURE);
return 1;
fail:
if (sig)
free_seckey_enc (sig);
free_public_key (revoker_pk);
return 0;
}
static int
menu_expire (KBNODE pub_keyblock)
{
int n1, signumber, rc;
u32 expiredate;
int mainkey = 0;
PKT_public_key *main_pk, *sub_pk;
PKT_user_id *uid;
KBNODE node;
u32 keyid[2];
n1 = count_selected_keys (pub_keyblock);
if (n1 > 1)
{
tty_printf (_("Please select at most one subkey.\n"));
return 0;
}
else if (n1)
tty_printf (_("Changing expiration time for a subkey.\n"));
else
{
tty_printf (_("Changing expiration time for the primary key.\n"));
mainkey = 1;
no_primary_warning (pub_keyblock);
}
expiredate = ask_expiredate ();
/* Now we can actually change the self-signature(s) */
main_pk = sub_pk = NULL;
uid = NULL;
signumber = 0;
for (node = pub_keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_KEY)
{
main_pk = node->pkt->pkt.public_key;
keyid_from_pk (main_pk, keyid);
main_pk->expiredate = expiredate;
}
else if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY
&& (node->flag & NODFLG_SELKEY))
{
sub_pk = node->pkt->pkt.public_key;
sub_pk->expiredate = expiredate;
}
else if (node->pkt->pkttype == PKT_USER_ID)
uid = node->pkt->pkt.user_id;
else if (main_pk && node->pkt->pkttype == PKT_SIGNATURE
&& (mainkey || sub_pk))
{
PKT_signature *sig = node->pkt->pkt.signature;
if (keyid[0] == sig->keyid[0] && keyid[1] == sig->keyid[1]
&& ((mainkey && uid
&& uid->created && (sig->sig_class & ~3) == 0x10)
|| (!mainkey && sig->sig_class == 0x18))
&& sig->flags.chosen_selfsig)
{
/* This is a self-signature which is to be replaced. */
PKT_signature *newsig;
PACKET *newpkt;
signumber++;
if ((mainkey && main_pk->version < 4)
|| (!mainkey && sub_pk->version < 4))
{
log_info
(_("You can't change the expiration date of a v3 key\n"));
return 0;
}
if (mainkey)
rc = update_keysig_packet (&newsig, sig, main_pk, uid, NULL,
main_pk, keygen_add_key_expire,
main_pk);
else
rc =
update_keysig_packet (&newsig, sig, main_pk, NULL, sub_pk,
main_pk, keygen_add_key_expire, sub_pk);
if (rc)
{
log_error ("make_keysig_packet failed: %s\n",
g10_errstr (rc));
return 0;
}
/* Replace the packet. */
newpkt = xmalloc_clear (sizeof *newpkt);
newpkt->pkttype = PKT_SIGNATURE;
newpkt->pkt.signature = newsig;
free_packet (node->pkt);
xfree (node->pkt);
node->pkt = newpkt;
sub_pk = NULL;
}
}
}
update_trust = 1;
return 1;
}
static int
menu_backsign (KBNODE pub_keyblock)
{
int rc, modified = 0;
PKT_public_key *main_pk;
KBNODE node;
u32 timestamp;
assert (pub_keyblock->pkt->pkttype == PKT_PUBLIC_KEY);
merge_keys_and_selfsig (pub_keyblock);
main_pk = pub_keyblock->pkt->pkt.public_key;
keyid_from_pk (main_pk, NULL);
/* We use the same timestamp for all backsigs so that we don't
reveal information about the used machine. */
timestamp = make_timestamp ();
for (node = pub_keyblock; node; node = node->next)
{
PKT_public_key *sub_pk = NULL;
KBNODE node2, sig_pk = NULL /*,sig_sk = NULL*/;
/* char *passphrase; */
/* Find a signing subkey with no backsig */
if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY)
{
if (node->pkt->pkt.public_key->pubkey_usage & PUBKEY_USAGE_SIG)
{
if (node->pkt->pkt.public_key->flags.backsig)
tty_printf (_
("signing subkey %s is already cross-certified\n"),
keystr_from_pk (node->pkt->pkt.public_key));
else
sub_pk = node->pkt->pkt.public_key;
}
else
tty_printf (_("subkey %s does not sign and so does"
" not need to be cross-certified\n"),
keystr_from_pk (node->pkt->pkt.public_key));
}
if (!sub_pk)
continue;
/* Find the selected selfsig on this subkey */
for (node2 = node->next;
node2 && node2->pkt->pkttype == PKT_SIGNATURE; node2 = node2->next)
if (node2->pkt->pkt.signature->version >= 4
&& node2->pkt->pkt.signature->flags.chosen_selfsig)
{
sig_pk = node2;
break;
}
if (!sig_pk)
continue;
/* Find the secret subkey that matches the public subkey */
log_debug ("FIXME: Check whether a secret subkey is available.\n");
/* if (!sub_sk) */
/* { */
/* tty_printf (_("no secret subkey for public subkey %s - ignoring\n"), */
/* keystr_from_pk (sub_pk)); */
/* continue; */
/* } */
/* Now we can get to work. */
rc = make_backsig (sig_pk->pkt->pkt.signature, main_pk, sub_pk, sub_pk,
timestamp, NULL);
if (!rc)
{
PKT_signature *newsig;
PACKET *newpkt;
rc = update_keysig_packet (&newsig, sig_pk->pkt->pkt.signature,
main_pk, NULL, sub_pk, main_pk,
NULL, NULL);
if (!rc)
{
/* Put the new sig into place on the pubkey */
newpkt = xmalloc_clear (sizeof (*newpkt));
newpkt->pkttype = PKT_SIGNATURE;
newpkt->pkt.signature = newsig;
free_packet (sig_pk->pkt);
xfree (sig_pk->pkt);
sig_pk->pkt = newpkt;
modified = 1;
}
else
{
log_error ("update_keysig_packet failed: %s\n",
g10_errstr (rc));
break;
}
}
else
{
log_error ("make_backsig failed: %s\n", g10_errstr (rc));
break;
}
}
return modified;
}
static int
change_primary_uid_cb (PKT_signature * sig, void *opaque)
{
byte buf[1];
/* first clear all primary uid flags so that we are sure none are
* lingering around */
delete_sig_subpkt (sig->hashed, SIGSUBPKT_PRIMARY_UID);
delete_sig_subpkt (sig->unhashed, SIGSUBPKT_PRIMARY_UID);
/* if opaque is set,we want to set the primary id */
if (opaque)
{
buf[0] = 1;
build_sig_subpkt (sig, SIGSUBPKT_PRIMARY_UID, buf, 1);
}
return 0;
}
/*
* Set the primary uid flag for the selected UID. We will also reset
* all other primary uid flags. For this to work with have to update
* all the signature timestamps. If we would do this with the current
* time, we lose quite a lot of information, so we use a a kludge to
* do this: Just increment the timestamp by one second which is
* sufficient to updated a signature during import.
*/
static int
menu_set_primary_uid (KBNODE pub_keyblock)
{
PKT_public_key *main_pk;
PKT_user_id *uid;
KBNODE node;
u32 keyid[2];
int selected;
int attribute = 0;
int modified = 0;
if (count_selected_uids (pub_keyblock) != 1)
{
tty_printf (_("Please select exactly one user ID.\n"));
return 0;
}
main_pk = NULL;
uid = NULL;
selected = 0;
/* Is our selected uid an attribute packet? */
for (node = pub_keyblock; node; node = node->next)
if (node->pkt->pkttype == PKT_USER_ID && node->flag & NODFLG_SELUID)
attribute = (node->pkt->pkt.user_id->attrib_data != NULL);
for (node = pub_keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY)
break; /* No more user ids expected - ready. */
if (node->pkt->pkttype == PKT_PUBLIC_KEY)
{
main_pk = node->pkt->pkt.public_key;
keyid_from_pk (main_pk, keyid);
}
else if (node->pkt->pkttype == PKT_USER_ID)
{
uid = node->pkt->pkt.user_id;
selected = node->flag & NODFLG_SELUID;
}
else if (main_pk && uid && node->pkt->pkttype == PKT_SIGNATURE)
{
PKT_signature *sig = node->pkt->pkt.signature;
if (keyid[0] == sig->keyid[0] && keyid[1] == sig->keyid[1]
&& (uid && (sig->sig_class & ~3) == 0x10)
&& attribute == (uid->attrib_data != NULL)
&& sig->flags.chosen_selfsig)
{
if (sig->version < 4)
{
char *user =
utf8_to_native (uid->name, strlen (uid->name), 0);
log_info (_("skipping v3 self-signature on user ID \"%s\"\n"),
user);
xfree (user);
}
else
{
/* This is a selfsignature which is to be replaced.
We can just ignore v3 signatures because they are
not able to carry the primary ID flag. We also
ignore self-sigs on user IDs that are not of the
same type that we are making primary. That is, if
we are making a user ID primary, we alter user IDs.
If we are making an attribute packet primary, we
alter attribute packets. */
/* FIXME: We must make sure that we only have one
self-signature per user ID here (not counting
revocations) */
PKT_signature *newsig;
PACKET *newpkt;
const byte *p;
int action;
/* See whether this signature has the primary UID flag. */
p = parse_sig_subpkt (sig->hashed,
SIGSUBPKT_PRIMARY_UID, NULL);
if (!p)
p = parse_sig_subpkt (sig->unhashed,
SIGSUBPKT_PRIMARY_UID, NULL);
if (p && *p) /* yes */
action = selected ? 0 : -1;
else /* no */
action = selected ? 1 : 0;
if (action)
{
int rc = update_keysig_packet (&newsig, sig,
main_pk, uid, NULL,
main_pk,
change_primary_uid_cb,
action > 0 ? "x" : NULL);
if (rc)
{
log_error ("update_keysig_packet failed: %s\n",
g10_errstr (rc));
return 0;
}
/* replace the packet */
newpkt = xmalloc_clear (sizeof *newpkt);
newpkt->pkttype = PKT_SIGNATURE;
newpkt->pkt.signature = newsig;
free_packet (node->pkt);
xfree (node->pkt);
node->pkt = newpkt;
modified = 1;
}
}
}
}
}
return modified;
}
/*
* Set preferences to new values for the selected user IDs
*/
static int
menu_set_preferences (KBNODE pub_keyblock)
{
PKT_public_key *main_pk;
PKT_user_id *uid;
KBNODE node;
u32 keyid[2];
int selected, select_all;
int modified = 0;
no_primary_warning (pub_keyblock);
select_all = !count_selected_uids (pub_keyblock);
/* Now we can actually change the self signature(s) */
main_pk = NULL;
uid = NULL;
selected = 0;
for (node = pub_keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY)
break; /* No more user-ids expected - ready. */
if (node->pkt->pkttype == PKT_PUBLIC_KEY)
{
main_pk = node->pkt->pkt.public_key;
keyid_from_pk (main_pk, keyid);
}
else if (node->pkt->pkttype == PKT_USER_ID)
{
uid = node->pkt->pkt.user_id;
selected = select_all || (node->flag & NODFLG_SELUID);
}
else if (main_pk && uid && selected
&& node->pkt->pkttype == PKT_SIGNATURE)
{
PKT_signature *sig = node->pkt->pkt.signature;
if (keyid[0] == sig->keyid[0] && keyid[1] == sig->keyid[1]
&& (uid && (sig->sig_class & ~3) == 0x10)
&& sig->flags.chosen_selfsig)
{
if (sig->version < 4)
{
char *user =
utf8_to_native (uid->name, strlen (uid->name), 0);
log_info (_("skipping v3 self-signature on user ID \"%s\"\n"),
user);
xfree (user);
}
else
{
/* This is a selfsignature which is to be replaced
* We have to ignore v3 signatures because they are
* not able to carry the preferences. */
PKT_signature *newsig;
PACKET *newpkt;
int rc;
rc = update_keysig_packet (&newsig, sig,
main_pk, uid, NULL, main_pk,
keygen_upd_std_prefs, NULL);
if (rc)
{
log_error ("update_keysig_packet failed: %s\n",
g10_errstr (rc));
return 0;
}
/* replace the packet */
newpkt = xmalloc_clear (sizeof *newpkt);
newpkt->pkttype = PKT_SIGNATURE;
newpkt->pkt.signature = newsig;
free_packet (node->pkt);
xfree (node->pkt);
node->pkt = newpkt;
modified = 1;
}
}
}
}
return modified;
}
static int
menu_set_keyserver_url (const char *url, KBNODE pub_keyblock)
{
PKT_public_key *main_pk;
PKT_user_id *uid;
KBNODE node;
u32 keyid[2];
int selected, select_all;
int modified = 0;
char *answer, *uri;
no_primary_warning (pub_keyblock);
if (url)
answer = xstrdup (url);
else
{
answer = cpr_get_utf8 ("keyedit.add_keyserver",
_("Enter your preferred keyserver URL: "));
if (answer[0] == '\0' || answer[0] == CONTROL_D)
{
xfree (answer);
return 0;
}
}
if (ascii_strcasecmp (answer, "none") == 0)
uri = NULL;
else
{
struct keyserver_spec *keyserver = NULL;
/* Sanity check the format */
keyserver = parse_keyserver_uri (answer, 1, NULL, 0);
xfree (answer);
if (!keyserver)
{
log_info (_("could not parse keyserver URL\n"));
return 0;
}
uri = xstrdup (keyserver->uri);
free_keyserver_spec (keyserver);
}
select_all = !count_selected_uids (pub_keyblock);
/* Now we can actually change the self signature(s) */
main_pk = NULL;
uid = NULL;
selected = 0;
for (node = pub_keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY)
break; /* ready */
if (node->pkt->pkttype == PKT_PUBLIC_KEY)
{
main_pk = node->pkt->pkt.public_key;
keyid_from_pk (main_pk, keyid);
}
else if (node->pkt->pkttype == PKT_USER_ID)
{
uid = node->pkt->pkt.user_id;
selected = select_all || (node->flag & NODFLG_SELUID);
}
else if (main_pk && uid && selected
&& node->pkt->pkttype == PKT_SIGNATURE)
{
PKT_signature *sig = node->pkt->pkt.signature;
if (keyid[0] == sig->keyid[0] && keyid[1] == sig->keyid[1]
&& (uid && (sig->sig_class & ~3) == 0x10)
&& sig->flags.chosen_selfsig)
{
char *user = utf8_to_native (uid->name, strlen (uid->name), 0);
if (sig->version < 4)
log_info (_("skipping v3 self-signature on user ID \"%s\"\n"),
user);
else
{
/* This is a selfsignature which is to be replaced
* We have to ignore v3 signatures because they are
* not able to carry the subpacket. */
PKT_signature *newsig;
PACKET *newpkt;
int rc;
const byte *p;
size_t plen;
p = parse_sig_subpkt (sig->hashed, SIGSUBPKT_PREF_KS, &plen);
if (p && plen)
{
tty_printf ("Current preferred keyserver for user"
" ID \"%s\": ", user);
tty_print_utf8_string (p, plen);
tty_printf ("\n");
if (!cpr_get_answer_is_yes
("keyedit.confirm_keyserver",
uri
? _("Are you sure you want to replace it? (y/N) ")
: _("Are you sure you want to delete it? (y/N) ")))
continue;
}
else if (uri == NULL)
{
/* There is no current keyserver URL, so there
is no point in trying to un-set it. */
continue;
}
rc = update_keysig_packet (&newsig, sig,
main_pk, uid, NULL,
main_pk,
keygen_add_keyserver_url, uri);
if (rc)
{
log_error ("update_keysig_packet failed: %s\n",
g10_errstr (rc));
xfree (uri);
return 0;
}
/* replace the packet */
newpkt = xmalloc_clear (sizeof *newpkt);
newpkt->pkttype = PKT_SIGNATURE;
newpkt->pkt.signature = newsig;
free_packet (node->pkt);
xfree (node->pkt);
node->pkt = newpkt;
modified = 1;
}
xfree (user);
}
}
}
xfree (uri);
return modified;
}
static int
menu_set_notation (const char *string, KBNODE pub_keyblock)
{
PKT_public_key *main_pk;
PKT_user_id *uid;
KBNODE node;
u32 keyid[2];
int selected, select_all;
int modified = 0;
char *answer;
struct notation *notation;
no_primary_warning (pub_keyblock);
if (string)
answer = xstrdup (string);
else
{
answer = cpr_get_utf8 ("keyedit.add_notation",
_("Enter the notation: "));
if (answer[0] == '\0' || answer[0] == CONTROL_D)
{
xfree (answer);
return 0;
}
}
if (!ascii_strcasecmp (answer, "none")
|| !ascii_strcasecmp (answer, "-"))
notation = NULL; /* Delete them all. */
else
{
notation = string_to_notation (answer, 0);
if (!notation)
{
xfree (answer);
return 0;
}
}
xfree (answer);
select_all = !count_selected_uids (pub_keyblock);
/* Now we can actually change the self signature(s) */
main_pk = NULL;
uid = NULL;
selected = 0;
for (node = pub_keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY)
break; /* ready */
if (node->pkt->pkttype == PKT_PUBLIC_KEY)
{
main_pk = node->pkt->pkt.public_key;
keyid_from_pk (main_pk, keyid);
}
else if (node->pkt->pkttype == PKT_USER_ID)
{
uid = node->pkt->pkt.user_id;
selected = select_all || (node->flag & NODFLG_SELUID);
}
else if (main_pk && uid && selected
&& node->pkt->pkttype == PKT_SIGNATURE)
{
PKT_signature *sig = node->pkt->pkt.signature;
if (keyid[0] == sig->keyid[0] && keyid[1] == sig->keyid[1]
&& (uid && (sig->sig_class & ~3) == 0x10)
&& sig->flags.chosen_selfsig)
{
char *user = utf8_to_native (uid->name, strlen (uid->name), 0);
if (sig->version < 4)
log_info (_("skipping v3 self-signature on user ID \"%s\"\n"),
user);
else
{
PKT_signature *newsig;
PACKET *newpkt;
int rc, skip = 0, addonly = 1;
if (sig->flags.notation)
{
tty_printf ("Current notations for user ID \"%s\":\n",
user);
tty_print_notations (-9, sig);
}
else
{
tty_printf ("No notations on user ID \"%s\"\n", user);
if (notation == NULL)
{
/* There are no current notations, so there
is no point in trying to un-set them. */
continue;
}
}
if (notation)
{
struct notation *n;
int deleting = 0;
notation->next = sig_to_notation (sig);
for (n = notation->next; n; n = n->next)
if (strcmp (n->name, notation->name) == 0)
{
if (notation->value)
{
if (strcmp (n->value, notation->value) == 0)
{
if (notation->flags.ignore)
{
/* Value match with a delete
flag. */
n->flags.ignore = 1;
deleting = 1;
}
else
{
/* Adding the same notation
twice, so don't add it at
all. */
skip = 1;
tty_printf ("Skipping notation:"
" %s=%s\n",
notation->name,
notation->value);
break;
}
}
}
else
{
/* No value, so it means delete. */
n->flags.ignore = 1;
deleting = 1;
}
if (n->flags.ignore)
{
tty_printf ("Removing notation: %s=%s\n",
n->name, n->value);
addonly = 0;
}
}
if (!notation->flags.ignore && !skip)
tty_printf ("Adding notation: %s=%s\n",
notation->name, notation->value);
/* We tried to delete, but had no matches. */
if (notation->flags.ignore && !deleting)
continue;
}
else
{
tty_printf ("Removing all notations\n");
addonly = 0;
}
if (skip
|| (!addonly
&&
!cpr_get_answer_is_yes ("keyedit.confirm_notation",
_("Proceed? (y/N) "))))
continue;
rc = update_keysig_packet (&newsig, sig,
main_pk, uid, NULL,
main_pk,
keygen_add_notations, notation);
if (rc)
{
log_error ("update_keysig_packet failed: %s\n",
g10_errstr (rc));
free_notation (notation);
xfree (user);
return 0;
}
/* replace the packet */
newpkt = xmalloc_clear (sizeof *newpkt);
newpkt->pkttype = PKT_SIGNATURE;
newpkt->pkt.signature = newsig;
free_packet (node->pkt);
xfree (node->pkt);
node->pkt = newpkt;
modified = 1;
if (notation)
{
/* Snip off the notation list from the sig */
free_notation (notation->next);
notation->next = NULL;
}
xfree (user);
}
}
}
}
free_notation (notation);
return modified;
}
/*
* Select one user id or remove all selection if IDX is 0 or select
* all if IDX is -1. Returns: True if the selection changed.
*/
static int
menu_select_uid (KBNODE keyblock, int idx)
{
KBNODE node;
int i;
if (idx == -1) /* Select all. */
{
for (node = keyblock; node; node = node->next)
if (node->pkt->pkttype == PKT_USER_ID)
node->flag |= NODFLG_SELUID;
return 1;
}
else if (idx) /* Toggle. */
{
for (i = 0, node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_USER_ID)
if (++i == idx)
break;
}
if (!node)
{
tty_printf (_("No user ID with index %d\n"), idx);
return 0;
}
for (i = 0, node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_USER_ID)
{
if (++i == idx)
{
if ((node->flag & NODFLG_SELUID))
node->flag &= ~NODFLG_SELUID;
else
node->flag |= NODFLG_SELUID;
}
}
}
}
else /* Unselect all */
{
for (node = keyblock; node; node = node->next)
if (node->pkt->pkttype == PKT_USER_ID)
node->flag &= ~NODFLG_SELUID;
}
return 1;
}
/* Search in the keyblock for a uid that matches namehash */
static int
menu_select_uid_namehash (KBNODE keyblock, const char *namehash)
{
byte hash[NAMEHASH_LEN];
KBNODE node;
int i;
assert (strlen (namehash) == NAMEHASH_LEN * 2);
for (i = 0; i < NAMEHASH_LEN; i++)
hash[i] = hextobyte (&namehash[i * 2]);
for (node = keyblock->next; node; node = node->next)
{
if (node->pkt->pkttype == PKT_USER_ID)
{
namehash_from_uid (node->pkt->pkt.user_id);
if (memcmp (node->pkt->pkt.user_id->namehash, hash, NAMEHASH_LEN) ==
0)
{
if (node->flag & NODFLG_SELUID)
node->flag &= ~NODFLG_SELUID;
else
node->flag |= NODFLG_SELUID;
break;
}
}
}
if (!node)
{
tty_printf (_("No user ID with hash %s\n"), namehash);
return 0;
}
return 1;
}
/*
* Select secondary keys
* Returns: True if the selection changed.
*/
static int
menu_select_key (KBNODE keyblock, int idx)
{
KBNODE node;
int i;
if (idx == -1) /* Select all. */
{
for (node = keyblock; node; node = node->next)
if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY
|| node->pkt->pkttype == PKT_SECRET_SUBKEY)
node->flag |= NODFLG_SELKEY;
}
else if (idx) /* Toggle selection. */
{
for (i = 0, node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY
|| node->pkt->pkttype == PKT_SECRET_SUBKEY)
if (++i == idx)
break;
}
if (!node)
{
tty_printf (_("No subkey with index %d\n"), idx);
return 0;
}
for (i = 0, node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY
|| node->pkt->pkttype == PKT_SECRET_SUBKEY)
if (++i == idx)
{
if ((node->flag & NODFLG_SELKEY))
node->flag &= ~NODFLG_SELKEY;
else
node->flag |= NODFLG_SELKEY;
}
}
}
else /* Unselect all. */
{
for (node = keyblock; node; node = node->next)
if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY
|| node->pkt->pkttype == PKT_SECRET_SUBKEY)
node->flag &= ~NODFLG_SELKEY;
}
return 1;
}
static int
count_uids_with_flag (KBNODE keyblock, unsigned flag)
{
KBNODE node;
int i = 0;
for (node = keyblock; node; node = node->next)
if (node->pkt->pkttype == PKT_USER_ID && (node->flag & flag))
i++;
return i;
}
static int
count_keys_with_flag (KBNODE keyblock, unsigned flag)
{
KBNODE node;
int i = 0;
for (node = keyblock; node; node = node->next)
if ((node->pkt->pkttype == PKT_PUBLIC_SUBKEY
|| node->pkt->pkttype == PKT_SECRET_SUBKEY) && (node->flag & flag))
i++;
return i;
}
static int
count_uids (KBNODE keyblock)
{
KBNODE node;
int i = 0;
for (node = keyblock; node; node = node->next)
if (node->pkt->pkttype == PKT_USER_ID)
i++;
return i;
}
/*
* Returns true if there is at least one selected user id
*/
static int
count_selected_uids (KBNODE keyblock)
{
return count_uids_with_flag (keyblock, NODFLG_SELUID);
}
static int
count_selected_keys (KBNODE keyblock)
{
return count_keys_with_flag (keyblock, NODFLG_SELKEY);
}
/* Returns how many real (i.e. not attribute) uids are unmarked. */
static int
real_uids_left (KBNODE keyblock)
{
KBNODE node;
int real = 0;
for (node = keyblock; node; node = node->next)
if (node->pkt->pkttype == PKT_USER_ID && !(node->flag & NODFLG_SELUID) &&
!node->pkt->pkt.user_id->attrib_data)
real++;
return real;
}
/*
* Ask whether the signature should be revoked. If the user commits this,
* flag bit MARK_A is set on the signature and the user ID.
*/
static void
ask_revoke_sig (KBNODE keyblock, KBNODE node)
{
int doit = 0;
PKT_user_id *uid;
PKT_signature *sig = node->pkt->pkt.signature;
KBNODE unode = find_prev_kbnode (keyblock, node, PKT_USER_ID);
if (!unode)
{
log_error ("Oops: no user ID for signature\n");
return;
}
uid = unode->pkt->pkt.user_id;
if (opt.with_colons)
{
if (uid->attrib_data)
printf ("uat:::::::::%u %lu", uid->numattribs, uid->attrib_len);
else
{
printf ("uid:::::::::");
es_write_sanitized (es_stdout, uid->name, uid->len, ":", NULL);
}
printf ("\n");
print_and_check_one_sig_colon (keyblock, node, NULL, NULL, NULL, NULL,
1);
}
else
{
char *p = utf8_to_native (unode->pkt->pkt.user_id->name,
unode->pkt->pkt.user_id->len, 0);
tty_printf (_("user ID: \"%s\"\n"), p);
xfree (p);
tty_printf (_("signed by your key %s on %s%s%s\n"),
keystr (sig->keyid), datestr_from_sig (sig),
sig->flags.exportable ? "" : _(" (non-exportable)"), "");
}
if (sig->flags.expired)
{
tty_printf (_("This signature expired on %s.\n"),
expirestr_from_sig (sig));
/* Use a different question so we can have different help text */
doit = cpr_get_answer_is_yes
("ask_revoke_sig.expired",
_("Are you sure you still want to revoke it? (y/N) "));
}
else
doit = cpr_get_answer_is_yes
("ask_revoke_sig.one",
_("Create a revocation certificate for this signature? (y/N) "));
if (doit)
{
node->flag |= NODFLG_MARK_A;
unode->flag |= NODFLG_MARK_A;
}
}
/*
* Display all user ids of the current public key together with signatures
* done by one of our keys. Then walk over all this sigs and ask the user
* whether he wants to revoke this signature.
* Return: True when the keyblock has changed.
*/
static int
menu_revsig (KBNODE keyblock)
{
PKT_signature *sig;
PKT_public_key *primary_pk;
KBNODE node;
int changed = 0;
int rc, any, skip = 1, all = !count_selected_uids (keyblock);
struct revocation_reason_info *reason = NULL;
assert (keyblock->pkt->pkttype == PKT_PUBLIC_KEY);
/* First check whether we have any signatures at all. */
any = 0;
for (node = keyblock; node; node = node->next)
{
node->flag &= ~(NODFLG_SELSIG | NODFLG_MARK_A);
if (node->pkt->pkttype == PKT_USER_ID)
{
if (node->flag & NODFLG_SELUID || all)
skip = 0;
else
skip = 1;
}
else if (!skip && node->pkt->pkttype == PKT_SIGNATURE
&& ((sig = node->pkt->pkt.signature),
have_secret_key_with_kid (sig->keyid)))
{
if ((sig->sig_class & ~3) == 0x10)
{
any = 1;
break;
}
}
}
if (!any)
{
tty_printf (_("Not signed by you.\n"));
return 0;
}
/* FIXME: detect duplicates here */
tty_printf (_("You have signed these user IDs on key %s:\n"),
keystr_from_pk (keyblock->pkt->pkt.public_key));
for (node = keyblock; node; node = node->next)
{
node->flag &= ~(NODFLG_SELSIG | NODFLG_MARK_A);
if (node->pkt->pkttype == PKT_USER_ID)
{
if (node->flag & NODFLG_SELUID || all)
{
PKT_user_id *uid = node->pkt->pkt.user_id;
/* Hmmm: Should we show only UIDs with a signature? */
tty_printf (" ");
tty_print_utf8_string (uid->name, uid->len);
tty_printf ("\n");
skip = 0;
}
else
skip = 1;
}
else if (!skip && node->pkt->pkttype == PKT_SIGNATURE
&& ((sig = node->pkt->pkt.signature),
have_secret_key_with_kid (sig->keyid)))
{
if ((sig->sig_class & ~3) == 0x10)
{
tty_printf (" ");
tty_printf (_("signed by your key %s on %s%s%s\n"),
keystr (sig->keyid), datestr_from_sig (sig),
sig->flags.exportable ? "" : _(" (non-exportable)"),
sig->flags.revocable ? "" : _(" (non-revocable)"));
if (sig->flags.revocable)
node->flag |= NODFLG_SELSIG;
}
else if (sig->sig_class == 0x30)
{
tty_printf (" ");
tty_printf (_("revoked by your key %s on %s\n"),
keystr (sig->keyid), datestr_from_sig (sig));
}
}
}
tty_printf ("\n");
/* ask */
for (node = keyblock; node; node = node->next)
{
if (!(node->flag & NODFLG_SELSIG))
continue;
ask_revoke_sig (keyblock, node);
}
/* present selected */
any = 0;
for (node = keyblock; node; node = node->next)
{
if (!(node->flag & NODFLG_MARK_A))
continue;
if (!any)
{
any = 1;
tty_printf (_("You are about to revoke these signatures:\n"));
}
if (node->pkt->pkttype == PKT_USER_ID)
{
PKT_user_id *uid = node->pkt->pkt.user_id;
tty_printf (" ");
tty_print_utf8_string (uid->name, uid->len);
tty_printf ("\n");
}
else if (node->pkt->pkttype == PKT_SIGNATURE)
{
sig = node->pkt->pkt.signature;
tty_printf (" ");
tty_printf (_("signed by your key %s on %s%s%s\n"),
keystr (sig->keyid), datestr_from_sig (sig), "",
sig->flags.exportable ? "" : _(" (non-exportable)"));
}
}
if (!any)
return 0; /* none selected */
if (!cpr_get_answer_is_yes
("ask_revoke_sig.okay",
_("Really create the revocation certificates? (y/N) ")))
return 0; /* forget it */
reason = ask_revocation_reason (0, 1, 0);
if (!reason)
{ /* user decided to cancel */
return 0;
}
/* now we can sign the user ids */
reloop: /* (must use this, because we are modifing the list) */
primary_pk = keyblock->pkt->pkt.public_key;
for (node = keyblock; node; node = node->next)
{
KBNODE unode;
PACKET *pkt;
struct sign_attrib attrib;
PKT_public_key *signerkey;
if (!(node->flag & NODFLG_MARK_A)
|| node->pkt->pkttype != PKT_SIGNATURE)
continue;
unode = find_prev_kbnode (keyblock, node, PKT_USER_ID);
assert (unode); /* we already checked this */
memset (&attrib, 0, sizeof attrib);
attrib.reason = reason;
attrib.non_exportable = !node->pkt->pkt.signature->flags.exportable;
node->flag &= ~NODFLG_MARK_A;
signerkey = xmalloc_secure_clear (sizeof *signerkey);
if (get_seckey (signerkey, node->pkt->pkt.signature->keyid))
{
log_info (_("no secret key\n"));
free_public_key (signerkey);
continue;
}
rc = make_keysig_packet (&sig, primary_pk,
unode->pkt->pkt.user_id,
NULL, signerkey, 0x30, 0, 0, 0, 0,
sign_mk_attrib, &attrib, NULL);
free_public_key (signerkey);
if (rc)
{
log_error (_("signing failed: %s\n"), g10_errstr (rc));
release_revocation_reason_info (reason);
return changed;
}
changed = 1; /* we changed the keyblock */
update_trust = 1;
/* Are we revoking our own uid? */
if (primary_pk->keyid[0] == sig->keyid[0] &&
primary_pk->keyid[1] == sig->keyid[1])
unode->pkt->pkt.user_id->is_revoked = 1;
pkt = xmalloc_clear (sizeof *pkt);
pkt->pkttype = PKT_SIGNATURE;
pkt->pkt.signature = sig;
insert_kbnode (unode, new_kbnode (pkt), 0);
goto reloop;
}
release_revocation_reason_info (reason);
return changed;
}
/* Revoke a user ID (i.e. revoke a user ID selfsig). Return true if
keyblock changed. */
static int
menu_revuid (KBNODE pub_keyblock)
{
PKT_public_key *pk = pub_keyblock->pkt->pkt.public_key;
KBNODE node;
int changed = 0;
int rc;
struct revocation_reason_info *reason = NULL;
/* Note that this is correct as per the RFCs, but nevertheless
somewhat meaningless in the real world. 1991 did define the 0x30
sig class, but PGP 2.x did not actually implement it, so it would
probably be safe to use v4 revocations everywhere. -ds */
for (node = pub_keyblock; node; node = node->next)
if (pk->version > 3 || (node->pkt->pkttype == PKT_USER_ID &&
node->pkt->pkt.user_id->selfsigversion > 3))
{
if ((reason = ask_revocation_reason (0, 1, 4)))
break;
else
goto leave;
}
reloop: /* (better this way because we are modifing the keyring) */
for (node = pub_keyblock; node; node = node->next)
if (node->pkt->pkttype == PKT_USER_ID && (node->flag & NODFLG_SELUID))
{
PKT_user_id *uid = node->pkt->pkt.user_id;
if (uid->is_revoked)
{
char *user = utf8_to_native (uid->name, uid->len, 0);
log_info (_("user ID \"%s\" is already revoked\n"), user);
xfree (user);
}
else
{
PACKET *pkt;
PKT_signature *sig;
struct sign_attrib attrib;
u32 timestamp = make_timestamp ();
if (uid->created >= timestamp)
{
/* Okay, this is a problem. The user ID selfsig was
created in the future, so we need to warn the user and
set our revocation timestamp one second after that so
everything comes out clean. */
log_info (_("WARNING: a user ID signature is dated %d"
" seconds in the future\n"),
uid->created - timestamp);
timestamp = uid->created + 1;
}
memset (&attrib, 0, sizeof attrib);
attrib.reason = reason;
node->flag &= ~NODFLG_SELUID;
rc = make_keysig_packet (&sig, pk, uid, NULL, pk, 0x30, 0,
(reason == NULL) ? 3 : 0, timestamp, 0,
sign_mk_attrib, &attrib, NULL);
if (rc)
{
log_error (_("signing failed: %s\n"), g10_errstr (rc));
goto leave;
}
else
{
pkt = xmalloc_clear (sizeof *pkt);
pkt->pkttype = PKT_SIGNATURE;
pkt->pkt.signature = sig;
insert_kbnode (node, new_kbnode (pkt), 0);
#ifndef NO_TRUST_MODELS
/* If the trustdb has an entry for this key+uid then the
trustdb needs an update. */
if (!update_trust
&& (get_validity (pk, uid) & TRUST_MASK) >=
TRUST_UNDEFINED)
update_trust = 1;
#endif /*!NO_TRUST_MODELS*/
changed = 1;
node->pkt->pkt.user_id->is_revoked = 1;
goto reloop;
}
}
}
if (changed)
commit_kbnode (&pub_keyblock);
leave:
release_revocation_reason_info (reason);
return changed;
}
/*
* Revoke the whole key.
*/
static int
menu_revkey (KBNODE pub_keyblock)
{
PKT_public_key *pk = pub_keyblock->pkt->pkt.public_key;
int rc, changed = 0;
struct revocation_reason_info *reason;
PACKET *pkt;
PKT_signature *sig;
if (pk->flags.revoked)
{
tty_printf (_("Key %s is already revoked.\n"), keystr_from_pk (pk));
return 0;
}
reason = ask_revocation_reason (1, 0, 0);
/* user decided to cancel */
if (!reason)
return 0;
rc = make_keysig_packet (&sig, pk, NULL, NULL, pk,
0x20, 0, opt.force_v4_certs ? 4 : 0, 0, 0,
revocation_reason_build_cb, reason, NULL);
if (rc)
{
log_error (_("signing failed: %s\n"), g10_errstr (rc));
goto scram;
}
changed = 1; /* we changed the keyblock */
pkt = xmalloc_clear (sizeof *pkt);
pkt->pkttype = PKT_SIGNATURE;
pkt->pkt.signature = sig;
insert_kbnode (pub_keyblock, new_kbnode (pkt), 0);
commit_kbnode (&pub_keyblock);
update_trust = 1;
scram:
release_revocation_reason_info (reason);
return changed;
}
static int
menu_revsubkey (KBNODE pub_keyblock)
{
PKT_public_key *mainpk;
KBNODE node;
int changed = 0;
int rc;
struct revocation_reason_info *reason = NULL;
reason = ask_revocation_reason (1, 0, 0);
if (!reason)
return 0; /* User decided to cancel. */
reloop: /* (better this way because we are modifing the keyring) */
mainpk = pub_keyblock->pkt->pkt.public_key;
for (node = pub_keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_SUBKEY
&& (node->flag & NODFLG_SELKEY))
{
PACKET *pkt;
PKT_signature *sig;
PKT_public_key *subpk = node->pkt->pkt.public_key;
struct sign_attrib attrib;
if (subpk->flags.revoked)
{
tty_printf (_("Subkey %s is already revoked.\n"),
keystr_from_pk (subpk));
continue;
}
memset (&attrib, 0, sizeof attrib);
attrib.reason = reason;
node->flag &= ~NODFLG_SELKEY;
rc = make_keysig_packet (&sig, mainpk, NULL, subpk, mainpk,
0x28, 0, 0, 0, 0, sign_mk_attrib, &attrib,
NULL);
if (rc)
{
log_error (_("signing failed: %s\n"), g10_errstr (rc));
release_revocation_reason_info (reason);
return changed;
}
changed = 1; /* we changed the keyblock */
pkt = xmalloc_clear (sizeof *pkt);
pkt->pkttype = PKT_SIGNATURE;
pkt->pkt.signature = sig;
insert_kbnode (node, new_kbnode (pkt), 0);
goto reloop;
}
}
commit_kbnode (&pub_keyblock);
/* No need to set update_trust here since signing keys no longer
are used to certify other keys, so there is no change in trust
when revoking/removing them */
release_revocation_reason_info (reason);
return changed;
}
/* Note that update_ownertrust is going to mark the trustdb dirty when
enabling or disabling a key. This is arguably sub-optimal as
disabled keys are still counted in the web of trust, but perhaps
not worth adding extra complexity to change. -ds */
#ifndef NO_TRUST_MODELS
static int
enable_disable_key (KBNODE keyblock, int disable)
{
PKT_public_key *pk =
find_kbnode (keyblock, PKT_PUBLIC_KEY)->pkt->pkt.public_key;
unsigned int trust, newtrust;
trust = newtrust = get_ownertrust (pk);
newtrust &= ~TRUST_FLAG_DISABLED;
if (disable)
newtrust |= TRUST_FLAG_DISABLED;
if (trust == newtrust)
return 0; /* already in that state */
update_ownertrust (pk, newtrust);
return 0;
}
#endif /*!NO_TRUST_MODELS*/
static void
menu_showphoto (KBNODE keyblock)
{
KBNODE node;
int select_all = !count_selected_uids (keyblock);
int count = 0;
PKT_public_key *pk = NULL;
/* Look for the public key first. We have to be really, really,
explicit as to which photo this is, and what key it is a UID on
since people may want to sign it. */
for (node = keyblock; node; node = node->next)
{
if (node->pkt->pkttype == PKT_PUBLIC_KEY)
pk = node->pkt->pkt.public_key;
else if (node->pkt->pkttype == PKT_USER_ID)
{
PKT_user_id *uid = node->pkt->pkt.user_id;
count++;
if ((select_all || (node->flag & NODFLG_SELUID)) &&
uid->attribs != NULL)
{
int i;
for (i = 0; i < uid->numattribs; i++)
{
byte type;
u32 size;
if (uid->attribs[i].type == ATTRIB_IMAGE &&
parse_image_header (&uid->attribs[i], &type, &size))
{
tty_printf (_("Displaying %s photo ID of size %ld for "
"key %s (uid %d)\n"),
image_type_to_string (type, 1),
(ulong) size, keystr_from_pk (pk), count);
show_photos (&uid->attribs[i], 1, pk, uid);
}
}
}
}
}
}
diff --git a/g10/main.h b/g10/main.h
index ad1a9f682..ce77a839b 100644
--- a/g10/main.h
+++ b/g10/main.h
@@ -1,378 +1,380 @@
/* main.h
* Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
* 2008, 2009, 2010 Free Software Foundation, Inc.
*
* This file is part of GnuPG.
*
* GnuPG is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* GnuPG is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef G10_MAIN_H
#define G10_MAIN_H
#include "types.h"
#include "iobuf.h"
#include "keydb.h"
#include "util.h"
/* It could be argued that the default cipher should be 3DES rather
than CAST5, and the default compression should be 0
(i.e. uncompressed) rather than 1 (zip). However, the real world
issues of speed and size come into play here. */
#define DEFAULT_CIPHER_ALGO CIPHER_ALGO_CAST5
#define DEFAULT_DIGEST_ALGO DIGEST_ALGO_SHA1
#define DEFAULT_S2K_DIGEST_ALGO DIGEST_ALGO_SHA1
#ifdef HAVE_ZIP
# define DEFAULT_COMPRESS_ALGO COMPRESS_ALGO_ZIP
#else
# define DEFAULT_COMPRESS_ALGO COMPRESS_ALGO_NONE
#endif
#define S2K_DIGEST_ALGO (opt.s2k_digest_algo?opt.s2k_digest_algo:DEFAULT_S2K_DIGEST_ALGO)
/* Various data objects. */
typedef struct
{
int header_okay;
PK_LIST pk_list;
DEK *symkey_dek;
STRING2KEY *symkey_s2k;
cipher_filter_context_t cfx;
} encrypt_filter_context_t;
struct groupitem
{
char *name;
strlist_t values;
struct groupitem *next;
};
/*-- gpg.c --*/
extern int g10_errors_seen;
#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 5 )
void g10_exit(int rc) __attribute__ ((noreturn));
#else
void g10_exit(int rc);
#endif
void print_pubkey_algo_note (pubkey_algo_t algo);
void print_cipher_algo_note (cipher_algo_t algo);
void print_digest_algo_note (digest_algo_t algo);
/*-- armor.c --*/
char *make_radix64_string( const byte *data, size_t len );
/*-- misc.c --*/
void trap_unaligned(void);
int disable_core_dumps(void);
void register_secured_file (const char *fname);
void unregister_secured_file (const char *fname);
int is_secured_file (int fd);
int is_secured_filename (const char *fname);
u16 checksum_u16( unsigned n );
u16 checksum( byte *p, unsigned n );
u16 checksum_mpi( gcry_mpi_t a );
u32 buffer_to_u32( const byte *buffer );
const byte *get_session_marker( size_t *rlen );
enum gcry_cipher_algos map_cipher_openpgp_to_gcry (cipher_algo_t algo);
#define openpgp_cipher_open(_a,_b,_c,_d) \
gcry_cipher_open((_a),map_cipher_openpgp_to_gcry((_b)),(_c),(_d))
#define openpgp_cipher_get_algo_keylen(_a) \
gcry_cipher_get_algo_keylen(map_cipher_openpgp_to_gcry((_a)))
#define openpgp_cipher_get_algo_blklen(_a) \
gcry_cipher_get_algo_blklen(map_cipher_openpgp_to_gcry((_a)))
int openpgp_cipher_blocklen (cipher_algo_t algo);
int openpgp_cipher_test_algo(cipher_algo_t algo);
const char *openpgp_cipher_algo_name (cipher_algo_t algo);
pubkey_algo_t map_pk_gcry_to_openpgp (enum gcry_pk_algos algo);
int openpgp_pk_test_algo (pubkey_algo_t algo);
int openpgp_pk_test_algo2 (pubkey_algo_t algo, unsigned int use);
int openpgp_pk_algo_usage ( int algo );
const char *openpgp_pk_algo_name (pubkey_algo_t algo);
enum gcry_md_algos map_md_openpgp_to_gcry (digest_algo_t algo);
int openpgp_md_test_algo (digest_algo_t algo);
const char *openpgp_md_algo_name (int algo);
struct expando_args
{
PKT_public_key *pk;
PKT_public_key *pksk;
byte imagetype;
int validity_info;
const char *validity_string;
};
char *pct_expando(const char *string,struct expando_args *args);
void deprecated_warning(const char *configname,unsigned int configlineno,
const char *option,const char *repl1,const char *repl2);
void deprecated_command (const char *name);
void obsolete_option (const char *configname, unsigned int configlineno,
const char *name);
int string_to_cipher_algo (const char *string);
int string_to_digest_algo (const char *string);
const char *compress_algo_to_string(int algo);
int string_to_compress_algo(const char *string);
int check_compress_algo(int algo);
int default_cipher_algo(void);
int default_compress_algo(void);
const char *compliance_option_string(void);
void compliance_failure(void);
struct parse_options
{
char *name;
unsigned int bit;
char **value;
char *help;
};
char *optsep(char **stringp);
char *argsplit(char *string);
int parse_options(char *str,unsigned int *options,
struct parse_options *opts,int noisy);
int has_invalid_email_chars (const char *s);
int is_valid_mailbox (const char *name);
const char *get_libexecdir (void);
int path_access(const char *file,int mode);
int pubkey_get_npkey (pubkey_algo_t algo);
int pubkey_get_nskey (pubkey_algo_t algo);
int pubkey_get_nsig (pubkey_algo_t algo);
int pubkey_get_nenc (pubkey_algo_t algo);
/* Temporary helpers. */
unsigned int pubkey_nbits( int algo, gcry_mpi_t *pkey );
int mpi_print (estream_t stream, gcry_mpi_t a, int mode);
unsigned int ecdsa_qbits_from_Q (unsigned int qbits);
/*-- status.c --*/
void set_status_fd ( int fd );
int is_status_enabled ( void );
void write_status ( int no );
void write_status_error (const char *where, gpg_error_t err);
void write_status_errcode (const char *where, int errcode);
void write_status_text ( int no, const char *text );
void write_status_strings (int no, const char *text,
...) GNUPG_GCC_A_SENTINEL(0);
void write_status_buffer ( int no,
const char *buffer, size_t len, int wrap );
void write_status_text_and_buffer ( int no, const char *text,
const char *buffer, size_t len, int wrap );
void write_status_begin_signing (gcry_md_hd_t md);
int cpr_enabled(void);
char *cpr_get( const char *keyword, const char *prompt );
char *cpr_get_no_help( const char *keyword, const char *prompt );
char *cpr_get_utf8( const char *keyword, const char *prompt );
char *cpr_get_hidden( const char *keyword, const char *prompt );
void cpr_kill_prompt(void);
int cpr_get_answer_is_yes( const char *keyword, const char *prompt );
int cpr_get_answer_yes_no_quit( const char *keyword, const char *prompt );
int cpr_get_answer_okay_cancel (const char *keyword,
const char *prompt,
int def_answer);
/*-- helptext.c --*/
void display_online_help( const char *keyword );
/*-- encode.c --*/
int setup_symkey (STRING2KEY **symkey_s2k,DEK **symkey_dek);
int encrypt_symmetric (const char *filename );
int encrypt_store (const char *filename );
int encrypt_crypt (ctrl_t ctrl, int filefd, const char *filename,
strlist_t remusr, int use_symkey, pk_list_t provided_keys,
int outputfd);
void encrypt_crypt_files (ctrl_t ctrl,
int nfiles, char **files, strlist_t remusr);
int encrypt_filter (void *opaque, int control,
iobuf_t a, byte *buf, size_t *ret_len);
/*-- sign.c --*/
int complete_sig (PKT_signature *sig, PKT_public_key *pksk, gcry_md_hd_t md,
const char *cache_nonce);
int sign_file (ctrl_t ctrl, strlist_t filenames, int detached, strlist_t locusr,
int do_encrypt, strlist_t remusr, const char *outfile );
int clearsign_file( const char *fname, strlist_t locusr, const char *outfile );
int sign_symencrypt_file (const char *fname, strlist_t locusr);
/*-- sig-check.c --*/
int check_revocation_keys (PKT_public_key *pk, PKT_signature *sig);
int check_backsig(PKT_public_key *main_pk,PKT_public_key *sub_pk,
PKT_signature *backsig);
int check_key_signature( KBNODE root, KBNODE node, int *is_selfsig );
int check_key_signature2( KBNODE root, KBNODE node, PKT_public_key *check_pk,
PKT_public_key *ret_pk, int *is_selfsig,
u32 *r_expiredate, int *r_expired );
/*-- delkey.c --*/
int delete_keys( strlist_t names, int secret, int allow_both );
/*-- keyedit.c --*/
void keyedit_menu (ctrl_t ctrl, const char *username, strlist_t locusr,
strlist_t commands, int quiet, int seckey_check );
void keyedit_passwd (ctrl_t ctrl, const char *username);
+void keyedit_quick_sign (ctrl_t ctrl, const char *fpr,
+ strlist_t uids, strlist_t locusr, int local);
void show_basic_key_info (KBNODE keyblock);
/*-- keygen.c --*/
u32 parse_expire_string(const char *string);
u32 ask_expire_interval(int object,const char *def_expire);
u32 ask_expiredate(void);
void generate_keypair (ctrl_t ctrl, const char *fname,
const char *card_serialno, int card_backup_key);
int keygen_set_std_prefs (const char *string,int personal);
PKT_user_id *keygen_get_std_prefs (void);
int keygen_add_key_expire( PKT_signature *sig, void *opaque );
int keygen_add_std_prefs( PKT_signature *sig, void *opaque );
int keygen_upd_std_prefs( PKT_signature *sig, void *opaque );
int keygen_add_keyserver_url(PKT_signature *sig, void *opaque);
int keygen_add_notations(PKT_signature *sig,void *opaque);
int keygen_add_revkey(PKT_signature *sig, void *opaque);
gpg_error_t make_backsig (PKT_signature *sig, PKT_public_key *pk,
PKT_public_key *sub_pk, PKT_public_key *sub_psk,
u32 timestamp, const char *cache_nonce);
gpg_error_t generate_subkeypair (ctrl_t ctrl, kbnode_t pub_keyblock);
#ifdef ENABLE_CARD_SUPPORT
gpg_error_t generate_card_subkeypair (kbnode_t pub_keyblock,
int keyno, const char *serialno);
int save_unprotected_key_to_card (PKT_public_key *sk, int keyno);
#endif
/*-- openfile.c --*/
int overwrite_filep( const char *fname );
char *make_outfile_name( const char *iname );
char *ask_outfile_name( const char *name, size_t namelen );
int open_outfile (int inp_fd, const char *iname, int mode, iobuf_t *a);
iobuf_t open_sigfile( const char *iname, progress_filter_context_t *pfx );
void try_make_homedir( const char *fname );
/*-- seskey.c --*/
void make_session_key( DEK *dek );
gcry_mpi_t encode_session_key( int openpgp_pk_algo, DEK *dek, unsigned nbits );
gcry_mpi_t encode_md_value (PKT_public_key *pk,
gcry_md_hd_t md, int hash_algo );
/*-- import.c --*/
int parse_import_options(char *str,unsigned int *options,int noisy);
void import_keys (ctrl_t ctrl, char **fnames, int nnames,
void *stats_hd, unsigned int options);
int import_keys_stream (ctrl_t ctrl, iobuf_t inp, void *stats_hd,
unsigned char **fpr,
size_t *fpr_len, unsigned int options);
int import_keys_es_stream (ctrl_t ctrl, estream_t fp, void *stats_handle,
unsigned char **fpr, size_t *fpr_len,
unsigned int options);
void *import_new_stats_handle (void);
void import_release_stats_handle (void *p);
void import_print_stats (void *hd);
int collapse_uids( KBNODE *keyblock );
/*-- export.c --*/
int parse_export_options(char *str,unsigned int *options,int noisy);
int export_pubkeys (ctrl_t ctrl, strlist_t users, unsigned int options );
int export_pubkeys_stream (ctrl_t ctrl, iobuf_t out, strlist_t users,
kbnode_t *keyblock_out, unsigned int options );
gpg_error_t export_pubkey_buffer (ctrl_t ctrl, const char *keyspec,
unsigned int options,
kbnode_t *r_keyblock,
void **r_data, size_t *r_datalen);
int export_seckeys (ctrl_t ctrl, strlist_t users);
int export_secsubkeys (ctrl_t ctrl, strlist_t users);
/*-- dearmor.c --*/
int dearmor_file( const char *fname );
int enarmor_file( const char *fname );
/*-- revoke.c --*/
struct revocation_reason_info;
int gen_revoke( const char *uname );
int gen_desig_revoke( const char *uname, strlist_t locusr);
int revocation_reason_build_cb( PKT_signature *sig, void *opaque );
struct revocation_reason_info *
ask_revocation_reason( int key_rev, int cert_rev, int hint );
void release_revocation_reason_info( struct revocation_reason_info *reason );
/*-- keylist.c --*/
void public_key_list (ctrl_t ctrl, strlist_t list, int locate_mode );
void secret_key_list (ctrl_t ctrl, strlist_t list );
void print_subpackets_colon(PKT_signature *sig);
void reorder_keyblock (KBNODE keyblock);
void list_keyblock( KBNODE keyblock, int secret, int fpr, void *opaque );
void print_fingerprint (estream_t fp, PKT_public_key *pk, int mode);
void print_revokers (estream_t fp, PKT_public_key *pk);
void show_policy_url(PKT_signature *sig,int indent,int mode);
void show_keyserver_url(PKT_signature *sig,int indent,int mode);
void show_notation(PKT_signature *sig,int indent,int mode,int which);
void dump_attribs (const PKT_user_id *uid, PKT_public_key *pk);
void set_attrib_fd(int fd);
void print_seckey_info (PKT_public_key *pk);
void print_pubkey_info (estream_t fp, PKT_public_key *pk);
void print_card_key_info (estream_t fp, KBNODE keyblock);
/*-- verify.c --*/
void print_file_status( int status, const char *name, int what );
int verify_signatures (ctrl_t ctrl, int nfiles, char **files );
int verify_files (ctrl_t ctrl, int nfiles, char **files );
int gpg_verify (ctrl_t ctrl, int sig_fd, int data_fd, estream_t out_fp);
/*-- decrypt.c --*/
int decrypt_message (ctrl_t ctrl, const char *filename );
gpg_error_t decrypt_message_fd (ctrl_t ctrl, int input_fd, int output_fd);
void decrypt_messages (ctrl_t ctrl, int nfiles, char *files[]);
/*-- plaintext.c --*/
int hash_datafiles( gcry_md_hd_t md, gcry_md_hd_t md2,
strlist_t files, const char *sigfilename, int textmode );
int hash_datafile_by_fd ( gcry_md_hd_t md, gcry_md_hd_t md2, int data_fd,
int textmode );
PKT_plaintext *setup_plaintext_name(const char *filename,IOBUF iobuf);
/*-- signal.c --*/
void init_signals(void);
void block_all_signals(void);
void unblock_all_signals(void);
/*-- server.c --*/
int gpg_server (ctrl_t);
gpg_error_t gpg_proxy_pinentry_notify (ctrl_t ctrl,
const unsigned char *line);
#ifdef ENABLE_CARD_SUPPORT
/*-- card-util.c --*/
void change_pin (int no, int allow_admin);
void card_status (estream_t fp, char *serialno, size_t serialnobuflen);
void card_edit (ctrl_t ctrl, strlist_t commands);
gpg_error_t card_generate_subkey (KBNODE pub_keyblock);
int card_store_subkey (KBNODE node, int use);
#endif
#define S2K_DECODE_COUNT(_val) ((16ul + ((_val) & 15)) << (((_val) >> 4) + 6))
#endif /*G10_MAIN_H*/

File Metadata

Mime Type
text/x-diff
Expires
Tue, Dec 30, 5:35 PM (12 h, 21 m)
Storage Engine
local-disk
Storage Format
Raw Data
Storage Handle
40/79/415962e2e8bddde0aef8d8461d34

Event Timeline