No OneTemporary
Actions

Size

79 KB

Subscribers

None

View Options

	diff --git a/autogen.rc b/autogen.rc
	index 181e472d..b71f8f15 100644
	--- a/autogen.rc
	+++ b/autogen.rc
	@@ -1,27 +1,29 @@
	# autogen.sh configuration for gpg4win -- sh --

	display_name="Gpg4win"
	patches_to="https://bugs.gnupg.org"
	# We don't want the maintainer mode due to the docker build
	# with the source directory mounted read-only
	maintainer_mode_option=off
	+# We always want to use the force option.
	+autogen_use_force=yes

	case "$myhost:$myhostsub" in
	w32:64)
	extraoptions="--with-additional-gpgex-host=i686-w64-mingw32"
	;;
	w32:)
	extraoptions="--with-additional-gpgex-host=x86_64-w64-mingw32"
	;;
	esac

	case "$myhost" in
	w32)
	configure_opts="--enable-gpg4win"
	;;
	esac

	extra_automake_flags="-Wno-portability"

	final_info="For building a Gpg4win installer: \"./build.sh\".
	For building an AppImage: check the README."
	diff --git a/autogen.sh b/autogen.sh
	index 8695fcb5..c0cde6ec 100755
	--- a/autogen.sh
	+++ b/autogen.sh
	@@ -1,545 +1,546 @@
	#! /bin/sh
	# autogen.sh
	# Copyright (C) 2003, 2014, 2017, 2018, 2022 g10 Code GmbH
	#
	# This file is free software; as a special exception the author gives
	# unlimited permission to copy and/or distribute it, with or without
	# modifications, as long as this notice is preserved.
	#
	# This program is distributed in the hope that it will be useful, but
	# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
	# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
	#
	# This is a generic script to create the configure script and handle cross
	# build environments. It requires the presence of a autogen.rc file to
	# configure it for the respective package. It is maintained as part of
	# GnuPG and source copied by other packages.
	#
	# Version: 2025-03-10

	configure_ac="configure.ac"

	cvtver () {
	awk 'NR==1 {split($NF,A,".");X=1000000A[1]+1000A[2]+A[3];print X;exit 0}'
	}

	check_version () {
	if [ $(( `("$1" --version \|\| echo "0") \| cvtver` >= $2 )) = 1 ]; then
	return 0
	fi
	echo "Error: "\`$1\'" not installed or too old." >&2
	echo ' Version '$3' or newer is required.' >&2
	[ -n "$4" ] && echo ' Note that this is part of '\`$4\''.' >&2
	DIE="yes"
	return 1
	}

	fatal () {
	echo "autogen.sh:" "$*" >&2
	DIE=yes
	}

	info () {
	if [ -z "${SILENT}" ]; then
	echo "autogen.sh:" "$*" >&2
	fi
	}

	die_p () {
	if [ "$DIE" = "yes" ]; then
	echo "autogen.sh: Stop." >&2
	exit 1
	fi
	}

	replace_sysroot () {
	configure_opts=$(echo $configure_opts \| sed "s#@SYSROOT@#${w32root}#g")
	extraoptions=$(echo $extraoptions \| sed "s#@SYSROOT@#${w32root}#g")
	}

	# Allow to override the default tool names
	AUTOCONF=${AUTOCONF_PREFIX}${AUTOCONF:-autoconf}${AUTOCONF_SUFFIX}
	AUTOHEADER=${AUTOCONF_PREFIX}${AUTOHEADER:-autoheader}${AUTOCONF_SUFFIX}

	AUTOMAKE=${AUTOMAKE_PREFIX}${AUTOMAKE:-automake}${AUTOMAKE_SUFFIX}
	ACLOCAL=${AUTOMAKE_PREFIX}${ACLOCAL:-aclocal}${AUTOMAKE_SUFFIX}

	GETTEXT=${GETTEXT_PREFIX}${GETTEXT:-gettext}${GETTEXT_SUFFIX}
	MSGMERGE=${GETTEXT_PREFIX}${MSGMERGE:-msgmerge}${GETTEXT_SUFFIX}

	DIE=no
	FORCE=
	SILENT=
	PRINT_HOST=no
	PRINT_BUILD=no
	PRINT_TSDIR=no
	tmp=$(dirname "$0")
	tsdir=$(cd "${tmp}"; pwd)

	if [ -n "${AUTOGEN_SH_SILENT}" ]; then
	SILENT=" --silent"
	fi
	if test x"$1" = x"--help"; then
	echo "usage: ./autogen.sh [OPTIONS] [ARGS]"
	echo " Options:"
	echo " --silent Silent operation"
	echo " --force Pass --force to autoconf"
	echo " --find-version Helper for configure.ac"
	echo " --git-build Run all commands to build from a Git"
	echo " --print-host Print only the host triplet"
	echo " --print-build Print only the build platform triplet"
	echo " --print-tsdir Print only the dir of this script"
	echo " --build-TYPE Configure to cross build for TYPE"
	echo ""
	echo " ARGS are passed to configure in --build-TYPE mode."
	echo " Configuration for this script is expected in autogen.rc"
	exit 0
	fi
	if test x"$1" = x"--silent"; then
	SILENT=" --silent"
	shift
	fi
	if test x"$1" = x"--force"; then
	FORCE=" --force"
	shift
	fi
	if test x"$1" = x"--print-host"; then
	PRINT_HOST=yes
	shift
	fi
	if test x"$1" = x"--print-build"; then
	PRINT_BUILD=yes
	shift
	fi


	# Reject unsafe characters in $HOME, $tsdir and cwd. We consider spaces
	# as unsafe because it is too easy to get scripts wrong in this regard.
	am_lf='
	'
	case `pwd` in
	[\;\\\"\#\$\&\'\`$am_lf\ \ ])
	fatal "unsafe working directory name" ;;
	esac
	case $tsdir in
	[\;\\\"\#\$\&\'\`$am_lf\ \ ])
	fatal "unsafe source directory: \`$tsdir'" ;;
	esac
	case $HOME in
	[\;\\\"\#\$\&\'\`$am_lf\ \ ])
	fatal "unsafe home directory: \`$HOME'" ;;
	esac
	die_p


	# List of variables sourced from autogen.rc. The strings '@SYSROOT@' in
	# these variables are replaced by the actual system root.
	configure_opts=
	extraoptions=
	# List of optional variables sourced from autogen.rc and ~/.gnupg-autogen.rc
	maintainer_mode_option=
	w32_toolprefixes=
	w32_extraoptions=
	w64_toolprefixes=
	w64_extraoptions=
	amd64_toolprefixes=
	disable_gettext_checks=
	# End list of optional variables sourced from ~/.gnupg-autogen.rc
	# What follows are variables which are sourced but default to
	# environment variables or lacking them hardcoded values.
	#w32root=
	#w64root=
	#amd64root=

	# Convenience option to use certain configure options for some hosts.
	myhost=""
	myhostsub=""
	case "$1" in
	--find-version)
	myhost="find-version"
	SILENT=" --silent"
	shift
	;;
	--print-tsdir)
	myhost="print-tsdir"
	SILENT=" --silent"
	shift
	;;
	--git-build)
	myhost="git-build"
	shift
	;;
	--build-w32)
	myhost="w32"
	shift
	;;
	--build-w64)
	myhost="w32"
	myhostsub="64"
	shift
	;;
	--build-amd64)
	myhost="amd64"
	shift
	;;
	--build*)
	fatal "Error: invalid build option $1"
	shift
	;;
	*)
	;;
	esac
	die_p


	# ** GIT BUILD **
	# This is a helper to build from git.
	if [ "$myhost" = "git-build" ]; then
	tmp="$(pwd)"
	cd "$tsdir" \|\| fatal "error cd-ing to $tsdir"
	./autogen.sh \|\| fatal "error running ./autogen.sh"
	cd "$tmp" \|\| fatal "error cd-ing back to $tmp"
	die_p
	"$tsdir"/configure \|\| fatal "error running $tsdir/configure"
	die_p
	make \|\| fatal "error running make"
	die_p
	make check \|\| fatal "error running make check"
	die_p
	exit 0
	fi
	# ** end GIT BUILD **


	# Source our configuration
	if [ -f "${tsdir}/autogen.rc" ]; then
	. "${tsdir}/autogen.rc"
	+ [ "$autogen_use_force" = yes ] && FORCE=" --force"
	fi

	# Source optional site specific configuration
	if [ -f "$HOME/.gnupg-autogen.rc" ]; then
	info "sourcing extra definitions from $HOME/.gnupg-autogen.rc"
	. "$HOME/.gnupg-autogen.rc"
	fi

	# Disable the --enable-maintainer_mode option.
	if [ "${maintainer_mode_option}" = off ]; then
	maintainer_mode_option=
	elif [ -z "${maintainer_mode_option}" ]; then
	maintainer_mode_option=--enable-maintainer-mode
	fi

	# ** FIND VERSION **
	# This is a helper for the configure.ac M4 magic
	# Called
	# ./autogen.sh --find-version PACKAGE MAJOR MINOR [MICRO]
	# returns a complete version string with automatic beta numbering.
	if [ "$myhost" = "find-version" ]; then
	package="$1"
	major="$2"
	minor="$3"
	micro="$4"

	if [ -z "$package" -o -z "$major" -o -z "$minor" ]; then
	echo "usage: ./autogen.sh --find-version PACKAGE MAJOR MINOR [MICRO]" >&2
	exit 1
	fi

	if [ -z "$micro" ]; then
	matchstr1="$package-$major.[0-9]*"
	matchstr2="$package-$major-base"
	matchstr3=""
	vers="$major.$minor"
	else
	matchstr1="$package-$major.$minor.[0-9]*"
	matchstr2="$package-$major.[0-9]*-base"
	matchstr3="$package-$major-base"
	vers="$major.$minor.$micro"
	fi
	matchexcl="--exclude $package-beta"

	beta=no
	if [ -e .git ]; then
	ingit=yes
	tmp=$(git describe --match "${matchstr1}" $matchexcl --long 2>/dev/null)
	if [ -n "$tmp" ]; then
	tmp=$(echo "$tmp" \| sed s/^"$package"// \
	\| awk -F- '$3!=0 && $3 !~ /^beta/ {print"-beta"$3}')
	else
	# (due tof "-base" in the tag we need to take the 4th field)
	tmp=$(git describe --match "${matchstr2}" $matchexcl --long 2>/dev/null)
	if [ -n "$tmp" ]; then
	tmp=$(echo "$tmp" \| sed s/^"$package"// \
	\| awk -F- '$4!=0 && $4 !~ /^beta/ {print"-beta"$4}')
	elif [ -n "${matchstr3}" ]; then
	tmp=$(git describe --match "${matchstr3}" $matchexcl --long 2>/dev/null)
	if [ -n "$tmp" ]; then
	tmp=$(echo "$tmp" \| sed s/^"$package"// \
	\| awk -F- '$4!=0 && $4 !~ /^beta/ {print"-beta"$4}')
	fi
	fi
	fi
	[ -n "$tmp" ] && beta=yes
	cid=$(git rev-parse --verify HEAD \| tr -d '\n\r')
	rev=$(git rev-parse --short HEAD \| tr -d '\n\r')
	rvd=$((0x$(echo ${rev} \| dd bs=1 count=4 2>/dev/null)))
	else
	ingit=no
	beta=yes
	tmp="-unknown"
	cid="0000000"
	rev="0000000"
	rvd="0"
	fi

	echo "$package-$vers$tmp:$beta:$ingit:$vers$tmp:$vers:$tmp:$rev:$rvd:$cid:"
	exit 0
	fi
	# ** end FIND VERSION **

	# ** PRINT TSDIR VERSION **
	# This is a helper used by some configure.ac M4 magic
	if [ "$myhost" = "print-tsdir" ]; then
	echo "$tsdir"
	exit 0
	fi
	# ** end PRINT TSDIR **


	if [ ! -f "$tsdir/build-aux/config.guess" ]; then
	fatal "$tsdir/build-aux/config.guess not found"
	exit 1
	fi
	build=`$tsdir/build-aux/config.guess`
	if [ $PRINT_BUILD = yes ]; then
	echo "$build"
	exit 0
	fi



	# ******************
	# W32 build script
	# ******************
	if [ "$myhost" = "w32" ]; then
	case $myhostsub in
	64)
	w32root="$w64root"
	[ -z "$w32root" ] && w32root="$HOME/w64root"
	toolprefixes="$w64_toolprefixes x86_64-w64-mingw32"
	extraoptions="$extraoptions $w64_extraoptions"
	;;
	*)
	[ -z "$w32root" ] && w32root="$HOME/w32root"
	toolprefixes="$w32_toolprefixes i686-w64-mingw32 i586-mingw32msvc"
	toolprefixes="$toolprefixes i386-mingw32msvc mingw32"
	extraoptions="$extraoptions $w32_extraoptions"
	;;
	esac
	w32root=$(echo "$w32root" \| sed s,^//,/,)
	info "Using $w32root as standard install directory"
	replace_sysroot

	# Locate the cross compiler
	crossbindir=
	for host in $toolprefixes; do
	if ${host}-gcc --version >/dev/null 2>&1 ; then
	crossbindir=/usr/${host}/bin
	conf_CC="CC=${host}-gcc"
	break;
	fi
	done
	if [ -z "$crossbindir" ]; then
	fatal "cross compiler kit not installed"
	if [ -z "$myhostsub" ]; then
	info "Under Debian GNU/Linux, you may install it using"
	info " apt-get install mingw32 mingw32-runtime mingw32-binutils"
	fi
	die_p
	fi
	if [ $PRINT_HOST = yes ]; then
	echo "$host"
	exit 0
	fi

	if [ -f "$tsdir/config.log" ]; then
	if ! head $tsdir/config.log \| grep "$host" >/dev/null; then
	fatal "Please run a 'make distclean' first"
	die_p
	fi
	fi

	$tsdir/configure "${maintainer_mode_option}" ${SILENT} \
	--prefix=${w32root} \
	--host=${host} --build=${build} SYSROOT=${w32root} \
	PKG_CONFIG_LIBDIR=${w32root}/lib/pkgconfig \
	${configure_opts} ${extraoptions} "$@"
	rc=$?
	exit $rc
	fi
	# *** end W32 build script *****

	# *** AMD64 cross build script *****
	# Used to cross-compile for AMD64 (for testing)
	if [ "$myhost" = "amd64" ]; then
	[ -z "$amd64root" ] && amd64root="$HOME/amd64root"
	info "Using $amd64root as standard install directory"
	replace_sysroot

	toolprefixes="$amd64_toolprefixes x86_64-linux-gnu amd64-linux-gnu"

	# Locate the cross compiler
	crossbindir=
	for host in $toolprefixes ; do
	if ${host}-gcc --version >/dev/null 2>&1 ; then
	crossbindir=/usr/${host}/bin
	conf_CC="CC=${host}-gcc"
	break;
	fi
	done
	if [ -z "$crossbindir" ]; then
	echo "Cross compiler kit not installed" >&2
	echo "Stop." >&2
	exit 1
	fi
	if [ $PRINT_HOST = yes ]; then
	echo "$host"
	exit 0
	fi

	if [ -f "$tsdir/config.log" ]; then
	if ! head $tsdir/config.log \| grep "$host" >/dev/null; then
	echo "Please run a 'make distclean' first" >&2
	exit 1
	fi
	fi

	$tsdir/configure "${maintainer_mode_option}" ${SILENT} \
	--prefix=${amd64root} \
	--host=${host} --build=${build} \
	${configure_opts} ${extraoptions} "$@"
	rc=$?
	exit $rc
	fi
	# *** end AMD64 cross build script *****


	# Grep the required versions from configure.ac
	autoconf_vers=`sed -n '/^AC_PREREQ(/ {
	s/^.($.$)/\1/p
	q
	}' ${configure_ac}`
	autoconf_vers_num=`echo "$autoconf_vers" \| cvtver`

	automake_vers=`sed -n '/^min_automake_version=/ {
	s/^.="$.$"/\1/p
	q
	}' ${configure_ac}`
	automake_vers_num=`echo "$automake_vers" \| cvtver`

	gettext_vers="n/a"
	if [ -d "${tsdir}/po" ]; then
	gettext_vers=`sed -n '/^AM_GNU_GETTEXT_VERSION(/ {
	s/^.\[$.$])/\1/p
	q
	}' ${configure_ac}`
	gettext_vers_num=`echo "$gettext_vers" \| cvtver`
	fi

	if [ -z "$autoconf_vers" -o -z "$automake_vers" ]
	then
	echo "Error: version information not found in "\`${configure_ac}\'"." >&2
	exit 1
	fi


	if check_version $AUTOCONF $autoconf_vers_num $autoconf_vers ; then
	check_version $AUTOHEADER $autoconf_vers_num $autoconf_vers autoconf
	fi
	if check_version $AUTOMAKE $automake_vers_num $automake_vers; then
	check_version $ACLOCAL $automake_vers_num $autoconf_vers automake
	fi
	if [ "$gettext_vers" != "n/a" ]; then
	if check_version $GETTEXT $gettext_vers_num $gettext_vers; then
	check_version $MSGMERGE $gettext_vers_num $gettext_vers gettext
	fi
	fi

	if [ "$DIE" = "yes" ]; then
	cat <<EOF

	Note that you may use alternative versions of the tools by setting
	the corresponding environment variables; see README.GIT for details.

	EOF
	die_p
	fi

	# Check the git setup.
	if [ -d .git ]; then
	CP="cp -p"
	# If we have a GNU cp we can add -v
	if cp --version >/dev/null 2>/dev/null; then
	[ -z "${SILENT}" ] && CP="$CP -v"
	fi
	if [ -f .git/hooks/pre-commit.sample -a ! -f .git/hooks/pre-commit ] ; then
	[ -z "${SILENT}" ] && cat <<EOF
	* Activating trailing whitespace git pre-commit hook. *
	For more information see this thread:
	https://mail.gnome.org/archives/desktop-devel-list/2009-May/msg00084.html
	To deactivate this pre-commit hook again move .git/hooks/pre-commit
	and .git/hooks/pre-commit.sample out of the way.
	EOF
	$CP .git/hooks/pre-commit.sample .git/hooks/pre-commit
	chmod +x .git/hooks/pre-commit
	fi

	if [ "$gettext_vers" != "n/a" ]; then
	tmp=$(git config --get filter.cleanpo.clean)
	if [ "$tmp" != \
	"awk '/^\"POT-Creation-Date:/&&!s{s=1;next};!/^#: /{print}'" ]
	then
	info "*** Adding GIT filter.cleanpo.clean configuration."
	git config --add filter.cleanpo.clean \
	"awk '/^\"POT-Creation-Date:/&&!s{s=1;next};!/^#: /{print}'"
	fi
	fi
	if [ -f build-aux/git-hooks/commit-msg -a ! -f .git/hooks/commit-msg ] ; then
	[ -z "${SILENT}" ] && cat <<EOF
	* Activating commit log message check hook. *
	EOF
	$CP build-aux/git-hooks/commit-msg .git/hooks/commit-msg
	chmod +x .git/hooks/commit-msg
	if [ x"${display_name}" != x ]; then
	git config format.subjectPrefix "PATCH ${display_name}"
	git config sendemail.to "${patches_to}"
	fi
	fi
	fi

	aclocal_flags="-I m4"
	if [ -n "${extra_aclocal_flags}" ]; then
	aclocal_flags="${aclocal_flags} ${extra_aclocal_flags}"
	fi
	if [ -n "${ACLOCAL_FLAGS}" ]; then
	aclocal_flags="${aclocal_flags} ${ACLOCAL_FLAGS}"
	fi

	automake_flags="--gnu"
	if [ -n "${extra_automake_flags}" ]; then
	automake_flags="${automake_flags} ${extra_automake_flags}"
	fi
	if [ -n "${AUTOMAKE_FLAGS}" ]; then
	automake_flags="${automake_flags} ${AUTOMAKE_FLAGS}"
	fi

	info "Running $ACLOCAL ${aclocal_flags} ..."
	$ACLOCAL ${aclocal_flags}
	info "Running autoheader..."
	$AUTOHEADER
	info "Running $AUTOMAKE ${automake_flags} ..."
	$AUTOMAKE ${automake_flags};
	info "Running autoconf${FORCE} ..."
	$AUTOCONF${FORCE}

	info "You may now run:${am_lf} ${final_info}"
	diff --git a/build.sh b/build.sh
	index a0bfb10a..57615ca7 100755
	--- a/build.sh
	+++ b/build.sh
	@@ -1,815 +1,808 @@
	#!/bin/bash
	# Copyright (C) 2024 g10 Code GmbH
	#
	# Software engineering by Andre Heinecke <aheinecke@gnupg.org>
	#
	# This file is part of GPG4Win.
	#
	# GPG4Win is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 2 of the License, or
	# (at your option) any later version.
	#
	# GPG4Win is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License
	# along with this program; if not, see <https://www.gnu.org/licenses/>.
	# SPDX-License-Identifier: GPL-2.0-or-later

	set -e

	PGM=build.sh

	usage()
	{
	cat <<EOF
	Usage: $PGM [OPTIONS]
	Build Gpg4win in a docker containter.

	Options:
	--appimage Build the AppImage instead of the NSIS installer.
	- --gnupg22 Use GnuPG 2.2
	- --gnupg24 Use GnuPG 2.4
	- --gnupg26 Use GnuPG 2.6 (default)
	--w32 Use 32 bit Windows as primary host arch
	--clean Remove a pre-existing build directory
	--dist Create a distributable tarball
	--release Create a tarball and then build this tarball
	--shell Start a shell instead of starting the build script
	--builddir=DIR Directory where the build should take place
	(default is ~/b/SRCDIRNAME-playground for gpg4win
	and ~/b/SRCDIRNAME-appimage for the AppImage)
	--logfile=file Change default build log file to FILE
	--force Force configure run
	--no-sign Do not authenticode sign packages
	--update-image Update the docker image before build
	--msi Building MSI packages
	--user=name Use NAME as FTP server user
	--download Download packages first
	--runcmd CMD Run a command via a pair of FIFOs
	--git-pkgs Use latest git versions for the frontend
	packages:
	libkleo kleopatra gpgol gpgol.js
	gpgpass gpg4win-tools mimetreeparser


	This script is used to build either the Appimage or the Windows
	installer. The build is done in a build directory with the suffix
	"-playground". Use the option --builddir to use a non-default build
	directory. Take care not to use the source directory for building.

	Examples:
	./$PGM
	Build in the default build directory ~/b/SRCDIRNAME-playground

	./$PGM --builddir=/foo/bar/my-playground
	Build in the given directory.
	EOF
	exit $1
	}

	# Other constants
	WINE=wine
	WINHOST=win10
	WINLIGHT=c:/wix/light.exe
	# WINEPREFIX - determined at runtime or passed by caller
	# WIXPREFIX - determined at runtime or passed by caller


	# Store the original script and the command line
	# for diagnostic reasons
	myself="$0"
	commandline="$0 $@"

	# Preset variables.
	indocker="no"
	-gnupgtag="gnupg26"
	shell="no"
	clean="no"
	dist="no"
	release="no"
	branch="master"
	srcdir=$(cd $(dirname $0); pwd)
	is_tmpbuild="no"
	update_image="no"
	w64="yes"
	download="no"
	runcmd="no"
	fromgit="no"
	withmsi="no"
	force=no
	nosign=no
	ftpuser=
	verbose=
	logfile=
	quiet=
	# Get UID for use by docker.
	userid=$(id -u)
	groupid=$(id -g)

	# Track whether we reset the tty to cooked mode. docker sets it to raw mode
	# and we set it back via our runner process so that we are sure docker is
	# already running.
	recooked=

	# Parse the command line options.
	skipshift=
	while [ $# -gt 0 ]; do
	case "$1" in
	--=)
	optarg=`echo "$1" \| sed 's/[-_a-zA-Z0-9]*=//'`
	;;
	*)
	optarg=""
	;;
	esac

	case "$1" in
	--appimage) appimage="yes";;
	- --gnupg22) gnupgtag="gnupg22";;
	- --gnupg24) gnupgtag="gnupg24";;
	- --gnupg26) gnupgtag="gnupg26";;
	--shell) shell="yes";;
	--clean\|-c) clean="yes";;
	--dist) dist="yes";;
	--release) release="yes";;
	--update-image\|--update-img\|-u) update_image="yes";;
	--w32) w64="no";;
	--w64) w64="yes";;
	--force) force="yes";;
	--no-sign) nosign="yes" ;;
	--download) download="yes";;
	--runcmd) runcmd="yes";;
	--git\|-g\|--git-pkgs) fromgit="yes";;
	--builddir\|--builddir=*) builddir="${optarg}" ;;
	--logfile\|--logfile=*) logfile="${optarg}" ;;
	--user\|--user=*) ftpuser="${optarg}" ;;
	--msi\|--with-msi) withmsi=yes ;;
	--verbose\|-v) verbose=yes ;;
	--*) usage 1 1>&2; exit 1;;
	*) skipshift=1; break ;;
	esac
	[ -z "$skipshift" ] && shift
	done

	[ -z "$verbose" ] && quiet="--quiet"

	if [ -z "$builddir" ]; then
	if [ "$release" = "yes" ]; then
	builddir="${HOME}/b/$(basename "$srcdir")-mill"
	elif [ "$appimage" = "yes" ]; then
	builddir="${HOME}/b/$(basename "$srcdir")-appimage"
	else
	builddir="${HOME}/b/$(basename "$srcdir")-playground"
	fi
	fi

	# Check whether we are running in the docker container.
	if [ -d /src/src -a -d /src/patches -a -d /build ]; then
	indocker="yes"
	srcdir=/src
	builddir=/build
	echo >&2 "$PGM: running in docker"
	fi

	echo >&2 "$PGM: source directory: $srcdir"
	echo >&2 "$PGM: build directory: $builddir"


	# First build a tarball and then build from that tarball
	build_from_tarball() {
	local milldir
	local tarballname
	local extraopt

	if [ "$indocker" = yes ]; then
	echo >&2 "$PGM: error: option --release may not be used from docker"
	exit 2
	fi

	[ -d "${builddir}" ] \|\| mkdir -p "${builddir}"
	milldir=$(cd "${builddir}"; pwd)

	# Use a common log file in the top directory.
	logfile="${milldir}/build-log.txt"

	( echo "$PGM: *"
	echo "$PGM: * Building release in $milldir"
	echo "$PGM: *" ) \| tee -a ${logfile} >&2

	rm -rf "$milldir/tarball" \|\| true
	rm -rf "$milldir/source" \|\| true
	rm -rf "$milldir/binary" \|\| true
	mkdir "$milldir/tarball"
	mkdir "$milldir/source"
	mkdir "$milldir/binary"

	extraopt="--logfile=$logfile"
	[ -n "$verbose" ] && extraopt="$extraopt --verbose"
	[ "$download" = yes ] && extraopt="$extraopt --download"
	$myself --builddir="$milldir/tarball" --dist $extraopt
	if [ $? != 0 ]; then
	( echo "$PGM: *"
	echo "$PGM: * ERROR: creating tarball failed"
	echo "$PGM: *" ) \| tee -a ${logfile} >&2
	exit 2
	fi

	tarballname=$(ls "$milldir/tarball/artifacts/"gpg4win*xz)

	cd "$milldir/source"
	tar --strip-components=1 -xJf "$tarballname"
	if [ $? != 0 ]; then
	( echo "$PGM: *"
	echo "$PGM: * ERROR: failed to extract tarball"
	echo "$PGM: *" ) \| tee -a ${logfile} >&2
	exit 2
	fi

	extraopt="--logfile=$logfile"
	[ -n "$verbose" ] && extraopt="$extraopt --verbose"
	[ $withmsi = yes ] && extraopt="$extraopt --msi"
	[ $nosign = yes ] && extraopt="$extraopt --no-sign"
	$myself --builddir="$milldir/binary" $extraopt
	if [ $? != 0 ]; then
	( echo "$PGM: *"
	echo "$PGM: * ERROR: building release failed"
	echo "$PGM: *" ) \| tee -a ${logfile} >&2
	exit 2
	fi

	( cd "$milldir/binary/artifacts"
	ln -s "$tarballname" . )

	( echo "$PGM: *"
	echo "$PGM: * READY"
	echo "$PGM: *" ) \| tee -a ${logfile} >&2
	exit 0
	}



	# The main GUI packages. Check the gen-tarball script to see which
	# branches are used.
	FRONTEND_PKGS="
	libkleo
	kleopatra
	gpgol
	gpgoljs
	gpgpass
	gpg4win-tools
	mimetreeparser"


	# Function to download the packages. Optionally generate new tarballs
	# for the main GUI components.
	download_packages() {
	if [ "$indocker" = yes ]; then
	echo >&2 "$PGM: error: downloading files from docker is not possible"
	exit 2
	fi

	cd packages

	if [ "$fromgit" = yes ]; then
	# FIXME: We should check at least the commits from the gpg4win
	# repo before doing this. But well, this very scripts is a
	# catch22 so that we need to have an external installed test
	# script before running this script from an updated repo. Or
	# well, we could use us to check our next version.
	echo >&2 "$PGM: Creating new tarballs and updating packages file ... "
	myargs=
	[ -n "$ftpuser" ] && myargs="$myargs --user=$ftpuser"
	./gen-tarball.sh $myargs -u $FRONTEND_PKGS
	echo >&2 "$PGM: Generating tarballs done"
	fi

	echo "$PGM: Downloading packages"
	- ./download.sh $quiet --$gnupgtag --update
	+ ./download.sh $quiet --update
	echo >&2 "$PGM: downloading done"

	cd ..
	}


	# Run a command using the FIFOs. This needs to be called via a FIFO
	# from the docker. Note that we don't explicit serialize access to the
	# FIFO, hopefully no parallel make rules are run.
	if [ "$runcmd" = yes ]; then
	if [ "$indocker" != yes ]; then
	echo >&2 "$PGM: Option --runcmd must be called from docker"
	echo >&2 "$PGM: Available commands are:"
	echo >&2 "$PGM: ping - Wait for a pong"
	echo >&2 "$PGM: gpg - Run a gpg command"
	echo >&2 "$PGM: msibase - Prepare MSI linking"
	echo >&2 "$PGM: litcandle - Run candle.exe"
	exit 2
	fi
	# Running in docker
	if [ -z "$1" ]; then
	echo >&2 "usage: /src/build.sh --runcmd COMMAND ARGS"
	exit 2
	fi
	[ -f /build/S.build.sh-rc ] && rm /build/S.build.sh-rc
	echo "$@" >/build/S.build.sh-in
	cat /build/S.build.sh-out
	while [ ! -f /build/S.build.sh-rc ]; do sleep 0.05; done
	rc=$(sed -ne 's/EXITSTATUS=$[0-9]$.$/\1/p' \
	</build/S.build.sh-rc 2>/dev/null \|\| true)
	[ -z "$rc" ] && rc=0
	exit $rc
	fi


	# Check whether we are in the docker image and run appropriate commands.
	# Note that this script is used to start the docker container and also
	# within the docker container to run the desired commands.
	if [ "$indocker" = yes ]; then
	# NB: In docker the builddir is always /build and the source /src
	cd /build
	if [ ! -f config.status ]; then
	force=yes
	elif [ /src/configure -nt config.status ]; then
	force=yes
	fi
	if [ $force = no ]; then
	echo >&2 "$PGM: Not running configure (--force not used)"
	elif [ "$w64" = "yes" ]; then
	/src/autogen.sh --build-w64
	else
	/src/autogen.sh --build-w32
	fi
	export CMAKE_COLOR_DIAGNOSTICS=OFF
	if [ $dist = yes ]; then
	make dist XZ_OPT=-2 TOPSRCDIR=/src PLAYGROUND=/build
	else
	make TOPSRCDIR=/src PLAYGROUND=/build VERBOSE=1
	if [ $? = 0 -a $withmsi = yes ]; then
	make TOPSRCDIR=/src PLAYGROUND=/build msi
	fi
	fi
	exit $?
	fi # (end of script use inside the docker container) #


	# Setup for using the Wix tools under Wine if requested.
	if [ $withmsi = yes ]; then
	if [ -z "$(which $WINE)" ]; then
	echo >&2 "$PGM: error: For MSI packaging Wine needs to be installed"
	exit 1
	fi
	[ -z "$WINEPREFIX" ] && WINEPREFIX="$HOME/.wine"
	if [ ! -e "$WINEPREFIX/dosdevices" ]; then
	echo >&2 "PGM: error: No value for WINEPREFIX found"
	exit 1
	fi
	if [ -z "$WIXPREFIX" ]; then
	tmp="$(readlink -f ~/w32root/wixtools)"
	if [ -d "$tmp" ]; then
	WIXPREFIX="$tmp"
	echo >&2 "$PGM: Using $WIXPREFIX as WIXPREFIX"
	else
	echo >&2 "$PGM: error: You must set WIXPREFIX" \
	" to an installation of wixtools"
	exit 1
	fi
	fi
	WINEINST="$WINEPREFIX/dosdevices/k:"
	WINESRC="$WINEPREFIX/dosdevices/i:"
	WINEINSTEX="$WINEPREFIX/dosdevices/j:"
	WINEBLD="$WINEPREFIX/dosdevices/l:"
	die=no
	for f in "$WINEINST" "$WINESRC" "$WINEINSTEX" "$WINEBLD" ; do
	if [ -e "$f" -a ! -h "$f" ]; then
	echo >&2 "$PGM: error: '$f' already exists. Please remove."
	die=yes
	fi
	done
	[ $die = yes ] && exit 1
	fi

	# Determine the needed docker image
	if [ "$appimage" = "yes" ]; then
	cmd=/src/src/appimage/build-appimage.sh
	docker_image=g10-build-appimage:almalinux810
	dockerfile=${srcdir}/docker/appimage
	else
	# We will run our self again in the docker image.
	if [ "$w64" = "yes" ]; then
	cmd="/src/build.sh --w64"
	else
	cmd="/src/build.sh --w32"
	fi
	[ $dist = yes ] && cmd="$cmd --dist"
	[ $force = yes ] && cmd="$cmd --force"
	[ $withmsi = yes -a $shell = no ] && cmd="$cmd --msi"
	docker_image=g10-build-gpg4win:trixie
	dockerfile=${srcdir}/docker/gpg4win-trixie
	fi

	# Update the docker image if requested or if it does not exist.
	drep=$(echo $docker_image \| cut -d : -f 1)
	dtag=$(echo $docker_image \| cut -d : -f 2)
	if [ -z "$(docker images \| grep $drep \| grep $dtag)" \
	-o "$update_image" = "yes" ]; then
	echo >&2 "$PGM: Local image $docker_image not found"
	echo >&2 "$PGM: Building docker image"
	docker build -t $docker_image $dockerfile 2>&1
	fi

	# Make sure we have a BUILDTYPE file
	if [ ! -e packages/BUILDTYPE ]; then
	echo >&2 "PGM: packages/BUILDTYPE not found - see README"
	exit 1
	fi

	# If --shell was used override the command for docker.
	# if not used try to download first.
	if [ "$shell" = "yes" ]; then
	cmd="bash"
	elif [ "$release" = yes ]; then
	build_from_tarball
	elif [ "$download" = yes ]; then
	download_packages
	else
	echo >&2 "$PGM: package download skipped"
	fi

	start_time=$(date +"%s")
	[ -z "$logfile" ] && logfile="${builddir}/build-log.txt"

	# Kill the given process and all its descendants
	killtree() {
	local parent=$1 child
	for child in $(ps -o ppid= -o pid= \| awk "\$1==$parent {print \$2}"); do
	killtree $child
	done
	kill $parent
	}


	# Remove FIFO files.
	remove_fifos() {
	[ -e "${builddir}/S.build.sh-in" ] && rm "${builddir}/S.build.sh-in"
	[ -e "${builddir}/S.build.sh-out" ] && rm "${builddir}/S.build.sh-out"
	return 0
	}


	# Create FIFO files.
	create_fifos() {
	remove_fifos
	mkfifo -m 600 "${builddir}/S.build.sh-in"
	mkfifo -m 600 "${builddir}/S.build.sh-out"
	return 0
	}


	# Make sure we have an absolute build directory and the fifos
	# so that docker does not create it with root as owner.
	[ -d "${builddir}" ] \|\| mkdir -p "${builddir}"
	builddir=$(cd "${builddir}"; pwd)
	[ -d "${builddir}/po" ] \|\| mkdir -p "${builddir}/po"
	create_fifos

	# Function to stop our command runner
	runnerpid=
	stop_runner() {
	printf >&2 -- "$PGM: stop-runner called\n"
	if [ -n "$runnerpid" ]; then
	echo >&2 "$PGM: stopping runner ..."
	killtree $runnerpid
	runnerpid=
	remove_fifos
	fi
	return 0
	}

	# Transform a directory from docker to host directory
	transform_dir() {
	echo "$1"\|sed -e "s,^/build/,$builddir/," -e "s,/src/,$srcdir/,"
	}

	# Transform all directories in the provided string
	# Fixme: This sed expression is not robust enough.
	transform_multi_dir() {
	echo "$1"\|sed -e "s, /build/, $builddir/,g" -e "s, /src/, $srcdir,g"
	}

	# Run a gpg command
	runner_cmd_gpg() {
	local cmd="$1"

	cmd=$(transform_multi_dir "$cmd")
	printf >&2 -- "$PGM(runner): invoking gpg\n"
	set +e
	$cmd </dev/null
	rc=$?
	set -e
	printf >&2 -- "$PGM(runner): gpg returned $rc\n"
	return 0
	}

	# Run the gpg-authcode-sign command
	runner_cmd_gpg_authcode_sign() {
	local cmd="$1"

	[ $nosign = yes ] && cmd="--dry-run $cmd"

	printf >&2 -- "$PGM(runner): gpg-authcode-sign.sh --stamp $cmd\n"
	set +e
	[ -n "$verbose" ] && set -x
	( cd "$builddir"/install && gpg-authcode-sign.sh --stamp $cmd </dev/null )
	rc=$?
	[ -n "$verbose" ] && set +x
	set -e
	printf >&2 -- "$PGM(runner): gpg-authcode-sign.sh returned $rc\n"
	return 0
	}


	# Copy some files to the Windows host to prepare the MSI linking
	# Args are: See below
	runner_cmd_msibase() {
	local version="$1" gnupgmsi="$2"

	set +e
	[ -n "$verbose" ] && set -x
	ssh "$WINHOST" "mkdir AppData\\Local\\Temp\\gpg4win-$version" \|\| true
	scp "$srcdir"/packages/gnupg-msi-${gnupgmsi}-bin.wixlib \
	"$WINHOST":AppData/Local/Temp/gpg4win-"$version";
	scp "$srcdir"/src/icons/shield.ico \
	"$WINHOST":AppData/Local/Temp/gpg4win-"$version"
	scp "$srcdir"/doc/logo/gpg4win-msi-header_install-493x58.bmp \
	"$WINHOST":AppData/Local/Temp/gpg4win-"$version"/header.bmp
	scp "$srcdir"/doc/logo/gpg4win-msi-wizard_install-493x312.bmp \
	"$WINHOST":AppData/Local/Temp/gpg4win-"$version"/dialog.bmp
	scp "$srcdir"/doc/logo/gpg4win-msi-wizard_install-493x312.bmp \
	"$WINHOST":AppData/Local/Temp/gpg4win-"$version"/dialog.bmp
	scp "$srcdir"/doc/logo/gpg4win-msi-wizard_install-info-32x32.bmp \
	"$WINHOST":AppData/Local/Temp/gpg4win-"$version"/info.bmp
	scp "$srcdir"/doc/logo/gpg4win-msi-wizard_install-exclamation-32x32.bmp \
	"$WINHOST":AppData/Local/Temp/gpg4win-"$version"/exclamation.bmp
	scp "$srcdir"/po/gpg4win-en.wxl \
	"$WINHOST":AppData/Local/Temp/gpg4win-"$version"
	scp "$srcdir"/po/gpg4win-de.wxl \
	"$WINHOST":AppData/Local/Temp/gpg4win-"$version"
	scp WixUI_Gpg4win.wxs \
	"$WINHOST":AppData/Local/Temp/gpg4win-"$version"
	rc=0
	[ -n "$verbose" ] && set +x
	set -e
	return 0
	}


	# Copy files to the Windows host
	runner_cmd_cptowinhost() {
	local version="$1"
	local target="$WINHOST":AppData/Local/Temp/gpg4win-"$version"
	local files

	shift

	files=
	for f in $@; do
	files="$files $(transform_dir "$f")"
	done
	set +e
	echo >&2 "$PGM: running scp $files $target"
	scp $files "$target"
	rc=$?
	set -e

	return 0
	}

	# Copy file from the Windows host
	runner_cmd_cpfromwinhost() {
	local version="$1" prefix="$2" name="$3" vsdvers="$4"
	local mydir="$WINHOST":AppData/Local/Temp/gpg4win-"$version"

	set +e
	scp "$mydir/$prefix-$version-$name.msi" \
	"$builddir/src/installers/$prefix-$vsdvers-$name.msi"
	rc=$?
	set -e

	return 0
	}

	# Copy files to the Windows host
	runner_cmd_lightwinhost() {
	local version="$1" prefix="$2" name="$3" intlopt="$4" msivers="$5"

	[ -n "$verbose" ] && set -x
	set +e
	ssh "$WINHOST" "cd AppData/Local/Temp/gpg4win-$version \
	&& $WINLIGHT \
	-cc . -reusecab -spdb \
	-ext WixUIExtension \
	-ext WixUtilExtension \
	-out $prefix-$version-$name.msi \
	$(echo "$intlopt" \| sed 's,%20, ,g') \
	-dcl:high -pedantic \
	$prefix-$version.wixlib gnupg-msi-$msivers-bin.wixlib $name-$version.wixlib" \
	\| grep -v "ICE80" \| grep -v "ICE57"
	rc="${PIPESTATUS[0]}"
	set -e
	[ -n "$verbose" ] && set +x
	# FIXME:
	echo >&2 "$PGM(runner): cmd lightwinhost exited with $rc - forcing 0"
	rc=0

	return 0
	}



	# Run the Wix tools under Wine.
	runner_cmd_litcandle() {
	local mode="$1" version="$2" prefix="$3" idir="$4" exidir="$5"
	local dwixobj fwxs

	if [ $withmsi = no ]; then
	echo >&2 "$PGM(runner): litcandle requires --with-msi option"
	rc=2
	return 0
	fi

	idir=$(transform_dir "$idir")
	exidir=$(transform_dir "$exidir")

	fwixlib="$prefix"-"$version".wixlib
	fwixobj="$prefix"-"$version".wixobj
	if [ "$mode" = ui ]; then
	fwxs="l:\\src\\gnupg-vsd\\$prefix\\$prefix".wxs
	fextraobj="k:\\gpg4win-ui.wixobj"
	else
	fwxs="l:\\src\\$prefix"-"$version".wxs
	fextraobj=
	fi

	# Create symlinks into the Wine dosdevices directory
	if [ -n "$verbose" ]; then
	echo >&2 "$PGM(runner): idir : $WINEINST"
	echo >&2 "$PGM(runner): exidir : $WINEINSTEX"
	echo >&2 "$PGM(runner): srcdir : $WINESRC"
	echo >&2 "$PGM(runner): builddir: $WINEBLD"
	fi
	ln -sf "$idir" "$WINEINST"
	ln -sf "$exidir" "$WINEINSTEX"
	ln -sf "$srcdir" "$WINESRC"
	ln -sf "$builddir" "$WINEBLD"
	# Run the tools
	rc=0
	[ -n "$verbose" ] && set -x
	set +e
	if [ $rc -eq 0 ]; then
	$WINE "$WIXPREFIX/candle.exe" \
	-dInstDir=k: \
	-dInstDirEx=j: \
	-dSrcDir=i:\\ \
	-dBldDir=l:\\ \
	-dVersion="$version" \
	-dWin64="yes" \
	-out k:\\"$fwixobj" \
	-pedantic -wx "$fwxs" \
	-arch x64
	rc=$?
	fi
	if [ $rc -eq 0 -a -n "$fextraobj" ]; then
	$WINE "$WIXPREFIX/candle.exe" \
	-dInstDir=k: \
	-dInstDirEx=j: \
	-dSrcDir=i:\\ \
	-dBldDir=l:\\ \
	-dVersion="$version" \
	-dWin64="yes" \
	-out "$fextraobj" \
	-arch x64 \
	-pedantic -wx i:\\src\\WixUI_Gpg4win.wxs
	rc=$?
	fi
	if [ $rc -eq 0 ]; then
	$WINE "$WIXPREFIX/lit.exe" \
	-out k:\\"$fwixlib" \
	-bf \
	-wx \
	-pedantic \
	k:\\"$fwixobj" "$fextraobj"
	rc=$?
	fi
	set -e
	[ -n "$verbose" ] && set +x
	# Remove the symlinks
	rm "$WINEINST" "$WINESRC" "$WINEINSTEX" "$WINEBLD" \|\| true
	return 0
	}


	# Run a command received from the fifo. Args are command and the line
	# with args for the command.
	runner_exec_cmd() {
	local cmd="$1" line="$2" rc
	printf >&2 -- "$PGM: cmd='%s' line='%s'\n" "$cmd" "$line"
	# The called functions need to set RC to the desired exit status
	rc=42
	case "$cmd" in
	ping) echo pong; rc=0 ;;
	gpg) runner_cmd_gpg "gpg $line" ;;
	gpg-authcode-sign) runner_cmd_gpg_authcode_sign "$line" ;;
	msibase) runner_cmd_msibase $line ;;
	cptowinhost) runner_cmd_cptowinhost $line ;;
	cpfromwinhost) runner_cmd_cpfromwinhost $line ;;
	lightwinhost) runner_cmd_lightwinhost $line ;;
	litcandle) runner_cmd_litcandle $line ;;
	*) echo "$PGM(runner): $cmd: no such command"; rc=4 ;;
	esac
	echo >&2 "$PGM: runner cmd '$cmd' returned $rc"
	# Make sure that we have a final LF in the output and then write
	# the error line
	echo
	echo "EXITSTATUS=$rc" > "${builddir}/S.build.sh-rc"
	return 0
	}


	# Start our FIFO command runner.
	runner_loop() {
	echo >&2 "$PGM: command runner started pid=$$"
	while : ; do
	if read -r cmd line < "${builddir}/S.build.sh-in" ; then
	if [ -z "$recooked" ]; then
	stty cooked </dev/tty
	recooked=yes
	fi
	echo >&2 "$PGM(runner): executing cmd"
	runner_exec_cmd "$cmd" "$line" >"${builddir}/S.build.sh-out" &
	echo >&2 "$PGM(runner): waiting for cmd"
	wait
	echo >&2 "$PGM(runner): cmd finished"
	fi
	done
	echo >&2 "$PGM: command runner stopped"
	exit 0
	}

	# Start our FIFO command runner
	trap stop_runner EXIT SIGTERM SIGINT SIGHUP
	runner_loop &
	runnerpid=$!
	echo >&2 "$PGM: command runner pid is $runnerpid"


	# Run docker
	docker_cmdline="run -it --rm --user $userid:$groupid"
	docker_cmdline="$docker_cmdline -v "${srcdir}":/src:ro"
	docker_cmdline="$docker_cmdline -v "${builddir}":/build:rw"
	docker_cmdline="$docker_cmdline -v "$HOME/.gnupg-autogen.rc":/.gnupg-autogen.rc:ro"
	docker_cmdline="$docker_cmdline $docker_image $cmd"
	echo >&2 "$PGM: running: docker $docker_cmdline"
	docker $docker_cmdline 2>&1 \| tee -a ${logfile}
	err="${PIPESTATUS[0]}"
	echo >&2 "$PGM: docker finished. rc=$err"

	end_time=$(date +"%s")
	duration=$((end_time - start_time))
	hours=$((duration / 3600))
	minutes=$((duration % 3600 / 60))
	seconds=$((duration % 60))
	buildtime=$(printf "%02d:%02d:%02d\n" "$hours" "$minutes" "$seconds")

	if [ "$err" = "1" -a "$appimage" = "yes" ]; then
	echo >&2 "$PGM: Return code 1 on AppImage build. Treating as success."
	err=0
	fi

	if [ "$err" = "0" ]; then
	mkdir -p "${builddir}/artifacts"
	if [ "$dist" = "yes" ]; then
	results=$(find "${builddir}" -maxdepth 1 -name \*.tar.xz \
	-a -type f -printf '%p ')
	elif [ "$appimage" = "yes" ]; then
	results=$(find "${builddir}" -maxdepth 1 -iname \*.appimage \
	-a -type f -printf '%p ')
	else
	results=$(find "${builddir}/src/installers" -type f -printf '%p ')
	fi
	echo >&2 ""
	echo >&2 "$PGM: ############### Success 🥳 ####################"
	for result in $results; do
	ln -sf -t "${builddir}/artifacts/" "$result"
	echo >&2 "$PGM: Created: ${builddir}/artifacts/$(basename $result)"
	done
	else
	echo >&2 "$PGM: ############### Failure 😪 ####################"
	fi

	echo >&2 "$PGM: Logfile: ${logfile}"
	echo >&2 "$PGM: Build command: ${commandline}"
	echo >&2 "$PGM: Build time: $buildtime"
	echo >&2 "$PGM: ##############################################"
	diff --git a/configure.ac b/configure.ac
	index c1cbaa75..36eec768 100644
	--- a/configure.ac
	+++ b/configure.ac
	@@ -1,675 +1,677 @@
	# configure.ac for GPG4Win
	# Copyright (C) 2005, 2006, 2007, 2008, 2010, 2023 g10 Code GmbH
	#
	# This file is part of GPG4Win
	#
	# GPG4Win is free software; you can redistribute it and/or modify it
	# under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 2 of the License, or
	# (at your option) any later version.
	#
	# GPG4Win is distributed in the hope that it will be useful, but
	# WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	# General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License
	# along with this program; if not, see <http://www.gnu.org/licenses/>.

	# (Process this file with autoconf to produce a configure script.)

	AC_PREREQ(2.59)
	min_automake_version="1.9.3"

	# To build a release you need to create a tag with the version number
	-# (git tag -s gpg4win-2.x.y) and run "./autogen.sh --force". Please
	+# (git tag -s gpg4win-z.x.y) and run "./autogen.sh --force". Please
	# bump the version number immediately after the release and do another
	-# commit and push so that the git magic is able to work.
	-# BUILDTYPE can be used to build the VSD or GPD versions. Note that
	-# IS_VSD_BUILD is set along with IS_GPD_BUILD.
	+# commit and push so that the git magic is able to work. BUILDTYPE
	+# defines what to build. It may be "vsd3" for the old VSD versions,
	+# "vsd" for the new (4.x) VSD versions, "gpd" for for GnuPG Desktop,
	+# or "gpg4win" for Gpg4win. Note that IS_VSD_BUILD is always set
	+# along with IS_GPD_BUILD.
	m4_define([mym4_package],[gpg4win])
	m4_define([mym4_isvsd],[no])
	m4_define([mym4_isgpd],[no])
	-m4_define([mym4_isv3build], m4_if(m4_esyscmd([ls packages/gnupg-2..tar. \| \
	- head -1 \| cut -d. -f2 \| \
	- tr -d '\n']),
	- [2], [yes], [no]))
	+m4_define([mym4_isvsd3build],[no])
	m4_define([mym4_buildtype],
	m4_chomp_all(m4_esyscmd([(cat packages/BUILDTYPE 2>/dev/null\
	\|\| echo default)])))
	-m4_if(mym4_buildtype,[vsd],[m4_define([mym4_isvsd],[yes])
	- m4_define([mym4_isv3build],[yes]]))
	-
	-# For VSD with GnuPG 2.6 we will use version 4.x
	+m4_if(mym4_buildtype,[vsd3],[m4_define([mym4_isvsd],[yes])
	+ m4_define([mym4_isvsd3build],[yes])],
	+ mym4_buildtype,[vsd],[m4_define([mym4_isvsd],[yes])],
	+ mym4_buildtype,[gpd],[m4_define([mym4_isvsd],[yes])
	+ m4_define([mym4_isgpd],[yes])])
	+
	+# For VSD with GnuPG 2.2 we use version 3.x
	+# For VSD with GnuPG 2.6 we use version 4.x
	# For GPD and Gpg4win with GnuPG 2.6 we use version 5.x
	-m4_if(mym4_buildtype,vsd,
	+# Note that the versions numbers are set for the next release. Right
	+# after the replease they are bumped up for the next release.
	+m4_if(mym4_buildtype,[vsd3],
	+ [m4_define([mym4_major],[3])
	+ m4_define([mym4_minor],[4])
	+ m4_define([mym4_micro],[0])],
	+ mym4_buildtype,[vsd],
	[m4_define([mym4_major],[4])
	m4_define([mym4_minor],[0])
	m4_define([mym4_micro],[0])],
	[m4_define([mym4_major],[5])
	m4_define([mym4_minor],[0])
	- m4_define([mym4_micro],[1])])
	-
	-
	-# We need to set isgpd only after having set the version number.
	-m4_if(mym4_buildtype,[gpd],[m4_define([mym4_isvsd],[yes])
	- m4_define([mym4_isgpd],[yes])])
	-
	+ m4_define([mym4_micro],[2])])

	# Below is m4 magic to extract and compute the git revision number,
	# the decimalized short revision number, a beta version string and a
	# flag indicating a development version (mym4_isbeta). Note that the
	# m4 processing is done by autoconf and not during the configure run.
	m4_define([mym4_tsdir], m4_chomp_all(m4_esyscmd([./autogen.sh --print-tsdir])))
	m4_define([mym4_verslist], m4_split(m4_esyscmd([./autogen.sh --find-version] \
	mym4_package mym4_major mym4_minor mym4_micro),[:]))
	m4_define([mym4_isbeta], m4_argn(2, mym4_verslist))
	m4_define([mym4_ingit], m4_argn(3, mym4_verslist))
	m4_define([mym4_version], m4_argn(4, mym4_verslist))
	m4_define([mym4_betastr], m4_argn(6, mym4_verslist))
	m4_define([mym4_revision], m4_argn(7, mym4_verslist))
	m4_define([mym4_revision_dec], m4_argn(8, mym4_verslist))
	m4_define([mym4_commitid], m4_argn(9, mym4_verslist))

	m4_esyscmd([echo ]mym4_version[>VERSION])
	m4_esyscmd([echo ]mym4_commitid[>>VERSION])

	AC_INIT([mym4_package],[mym4_version],[https://bugs.gnupg.org])


	PACKAGE=$PACKAGE_NAME
	VERSION=$PACKAGE_VERSION
	BUILD_COMMITID="mym4_commitid"
	GIT_REVISION=mym4_revision
	GIT_REVISION_DEC=mym4_revision_dec
	GIT_BETASTRING=mym4_betastr
	IS_BETA_BUILD=mym4_isbeta
	IS_VSD_BUILD=mym4_isvsd
	IS_GPD_BUILD=mym4_isgpd
	+IS_VSD3_BUILD=mym4_isvsd3build
	+MSI_VERSIONSTRING=mym4_major.mym4_minor.m4_if(mym4_isbeta,[yes],[90],mym4_micro)
	+

	# Variables for the version info
	PRODUCT_NAME=m4_if(mym4_isgpd, [yes], ["GnuPG Desktop"],
	m4_if(mym4_isvsd, [yes], ["GnuPG VS-Desktop"], ["Gpg4win"]))
	COMPANY_NAME=m4_if(mym4_buildtype, [default],
	["Gpg4win Community"], ["g10 Code GmbH"])

	# Early sanity checks and dirs
	AC_CONFIG_SRCDIR(src/nsis/config.nsi.in)
	AC_CONFIG_MACRO_DIR(m4)

	AC_CONFIG_AUX_DIR([build-aux])
	AM_INIT_AUTOMAKE([tar-ustar])
	AM_MAINTAINER_MODE
	AC_CANONICAL_HOST
	AC_CONFIG_HEADERS([config.h])


	AC_SUBST(PRODUCT_NAME)
	AC_SUBST(COMPANY_NAME)
	AC_SUBST(PACKAGE)
	AC_SUBST(VERSION)
	AC_SUBST(GIT_BETASTRING)
	AC_SUBST(IS_BETA_BUILD)
	AC_SUBST(IS_VSD_BUILD)
	AC_SUBST(IS_GPD_BUILD)
	+AC_SUBST(IS_VSD3_BUILD)
	+AC_SUBST(MSI_VERSIONSTRING)
	AC_SUBST(BUILD_COMMITID)

	# Generate extended version information. Note, that for NSIS use we
	# must not translate the dots to commas in the BUILD_FILEVERSION.
	BUILD_TIMESTAMP=`date --iso-8601=minutes`
	BUILD_ISODATE=`date --iso-8601`
	BUILD_DATETIME=`date +%Y%m%d%H%M`
	changequote(,)dnl
	BUILD_FILEVERSION=`echo "$VERSION" \| sed 's/$[0-9.]$./\1./'`
	changequote([,])dnl
	BUILD_FILEVERSION="${BUILD_FILEVERSION}${GIT_REVISION_DEC}"
	BUILD_FILEVERSION_TR=`echo "${BUILD_FILEVERSION}" \| tr . ,`
	changequote(,)dnl
	BUILD_BETANUM=`let a=$(($(echo "${GIT_BETASTRING}"\|sed 's/[^0-9]*//')+0));echo $a`
	changequote([,])dnl
	AC_SUBST(BUILD_BETANUM)
	AC_SUBST(BUILD_TIMESTAMP)
	AC_SUBST(BUILD_ISODATE)
	AC_SUBST(BUILD_FILEVERSION)
	AC_SUBST(BUILD_FILEVERSION_TR)


	# The final release is copied to an archive server. The default
	# location may be changed by setting the RELEASEHOST envvar.
	if test -z "$RELEASEHOST" ; then
	RELEASEHOST="vigenere:tarballs/gpg4win"
	if test "${IS_BETA_BUILD}" = yes ; then
	RELEASEHOST="${RELEASEHOST}/Beta"
	fi
	fi
	AC_SUBST(RELEASEHOST)

	# Substitutions to set generated files in a Emacs buffer to read-only.
	AC_SUBST(emacs_local_vars_begin, ['Local Variables:'])
	AC_SUBST(emacs_local_vars_read_only, ['buffer-read-only: t'])
	AC_SUBST(emacs_local_vars_end, ['End:'])

	+# The next two macro proive --enable-gpg4win and --enable-appimage
	+# configure options and store them in $build_gpg4win or $build_appimage.
	+# These options are used by autogen.rc
	GPG4WIN_BUILD_RELEASE(gpg4win, no)
	GPG4WIN_BUILD_RELEASE(appimage, no)

	# Additionaly enable building gpgex for another host
	AC_ARG_WITH([additional-gpgex-host],
	AS_HELP_STRING([--with-additional-gpgex-host=HOST],
	[Additionaly build gpgex for this host]),
	[if test "$withval" = yes; then
	AC_MSG_FAILURE(
	[--with-additional-gpgex-host was given,
	but no host specified])
	else
	gpgex_host=$withval
	fi
	],
	gpgex_host=no)

	if test "$gpgex_host" != no; then
	GPGEX_ADD_HOST="$gpgex_host"
	fi
	AC_SUBST(GPGEX_ADD_HOST)

	AC_ARG_ENABLE(fast-makensis,
	AS_HELP_STRING([--enable-fast-makensis],
	[Use a less efficient compressor to speed up building]),
	use_fast_makensis=$enableval,
	use_fast_makensis=no)
	if test "$use_fast_makensis" = yes; then
	EXTRA_MAKENSIS_FLAGS="${EXTRA_MAKENSIS_FLAGS} -DDISABLE_LZMA=1"
	fi
	AC_SUBST(EXTRA_MAKENSIS_FLAGS)

	# Use ninja instead of make for cmake projects
	AC_ARG_ENABLE(ninja,
	AS_HELP_STRING([--enable-ninja],
	[Use ninja instead of make]),
	use_ninja=$enableval,
	use_ninja=no)

	#
	# Set variables for use by automake makefiles.
	#
	-if test -f /src/packages/BUILDTYPE ; then
	- dockerbuild=yes
	-else
	- dockerbuild=no
	-fi
	-AM_CONDITIONAL(DOCKERBUILD, test "$dockerbuild" = "yes")
	AM_CONDITIONAL(BUILD_GPG4WIN, test "$build_gpg4win" = "yes")
	AM_CONDITIONAL(BUILD_APPIMAGE, test "$build_appimage" = "yes")
	AM_CONDITIONAL(BUILD_W64_COND, test "$BUILD_W64" = "yes")


	# Required tools.
	AC_PROG_CC
	AC_PROG_CPP
	AC_PROG_RANLIB
	AC_PROG_AWK
	AC_CHECK_TOOL(AR, ar, :)
	AC_CHECK_TOOLS(STRIP, strip)
	AC_CHECK_TOOLS(DLLTOOL, dlltool)
	AC_CHECK_PROGS(MAKE, make)
	AC_CHECK_PROGS(UNZIP, unzip)
	AC_CHECK_PROGS(TAR, tar)
	AC_CHECK_PROGS(MKDIR, mkdir)
	AC_CHECK_PROGS(CP, cp)
	AC_CHECK_PROGS(RM, rm)
	AC_CHECK_PROGS(STOW, stow)
	AC_CHECK_PROGS(MAKENSIS, makensis)
	AC_CHECK_PROGS(ZCAT, zcat)
	AC_CHECK_PROGS(TEXI2DVI, texi2dvi)
	AC_CHECK_PROGS(DVIPDF, dvipdf)
	AC_CHECK_PROGS(CONVERT, convert)
	AC_CHECK_PROGS(SHA1SUM, sha1sum)
	AC_CHECK_PROGS(MSGFMT, msgfmt)
	AC_CHECK_PROGS(MSGFMT, msgmerge)
	AC_CHECK_PROGS(GITLOG_TO_CHANGELOG, gitlog-to-changelog,
	[build-aux/gitlog-to-changelog])
	AC_CHECK_PROGS(BUILD_CC, gcc cc)
	AC_CHECK_PROGS(CMAKE, cmake3 cmake)
	AC_CHECK_PROGS(RSYNC, rsync)
	if test "${use_ninja}" = "yes"; then
	AC_CHECK_PROGS(NINJA, ninja)
	MAKETOOL=${NINJA}
	CMAKE_GENERATOR_FLAGS="-G Ninja -DCMAKE_GENERATOR=Ninja"
	AC_MSG_NOTICE([Using ${NINJA} in cmake projects])
	else
	MAKETOOL=${MAKE}
	fi
	AC_SUBST(CMAKE_GENERATOR_FLAGS)
	AC_SUBST(MAKETOOL)

	AC_PROG_INSTALL

	if test -n "$GPGEX_ADD_HOST"; then
	AC_CHECK_TOOLS(STRIP_EX, ${GPGEX_ADD_HOST}-strip)
	fi

	if test -z "$GPG4WIN_PARALLEL"; then
	JOBS=$(nproc 2>/dev/null \|\| echo 1)
	GPG4WIN_PARALLEL=-j$JOBS
	AC_MSG_NOTICE([Using autodetected $JOBS make jobs. You can override this by setting GPG4WIN_PARALLEL.])
	fi
	AC_SUBST(GPG4WIN_PARALLEL)

	required_tools="MAKE TAR MKDIR CP RM ZCAT SHA1SUM MSGFMT BUILD_CC CMAKE"
	if test "$build_gpg4win" = yes ; then
	required_tools="$required_tools DLLTOOL UNZIP STOW MAKENSIS TEXI2DVI DVIPDF CONVERT"
	fi
	if test "$build_appimage" = yes ; then
	required_tools="$required_tools RSYNC"
	fi

	missing_tools=
	for i in $required_tools; do
	eval tmp='$'$i
	if test -z "$tmp"; then
	missing_tools="$missing_tools `echo $i \| tr 'A-Z' 'a-z'`"
	fi
	done

	if test "$build_gpg4win" = yes ; then

	case "${host}" in
	x86_64-mingw32)
	BUILD_W64=yes
	# Since we use 32 makensis we need to compile our plugin
	# for NSIS also for 32bit so we hardcode this here.
	# Otherwise for 64 bit builds --with-additional-gpgex-host
	# is then 32 bit to take care of that.
	AC_CHECK_PROGS(W32CC32, i686-w64-mingw32-gcc)
	GPG4WIN_RUNTIME_LIBRARY(libgcc_s_seh-1)
	;;
	*)
	W32CC32=${CC}
	BUILD_W64=no
	;;
	esac
	AC_SUBST(BUILD_W64)

	GPG4WIN_RUNTIME_LIBRARY(libstdc++-6, REQUIRED)
	GPG4WIN_RUNTIME_LIBRARY(libwinpthread-1, REQUIRED)

	GPG4WIN_RUNTIME_LIBRARY_EX(libwinpthread-1)

	# One of these is required
	GPG4WIN_RUNTIME_LIBRARY(libgcc_s_dw2-1)
	GPG4WIN_RUNTIME_LIBRARY(libgcc_s_sjlj-1)

	if test "${gpg4win_rtlib_libgcc_s_dw2_1}" = no \
	-a "${gpg4win_rtlib_libgcc_s_sjlj_1}" = no \
	-a "${gpg4win_rtlib_libgcc_s_seh_1}" = no ; then
	AC_MSG_ERROR(No exception library found. Please check what your system
	uses and see above message about either dw2- sjlj- or seh-
	dlls.)
	fi
	fi

	AC_CHECK_PROGS(WGET, wget)


	#
	# Set source and build directory.
	#
	# They are always set to the directories seen outside of the
	# container.
	#
	TOPSRCDIR="mym4_tsdir"
	AC_ARG_WITH([playground],
	AS_HELP_STRING([--with-playground=DIR],
	[Use DIR as the build directory]),
	[PLAYGROUND="$withval"], [PLAYGROUND=""])

	if test -n "$PLAYGROUND" ; then
	if test ! -d "$PLAYGROUND"; then
	AC_MSG_ERROR([[
	***
	*** Given playground directory does not exist.
	*** Please create it first or use the default.
	***]])
	fi
	PLAYGROUND="$(cd "$PLAYGROUND" && pwd)"
	else
	PLAYGROUND="${HOME}/b/$(basename "$TOPSRCDIR")-playground"
	fi
	PLAYGROUND=$(echo "$PLAYGROUND" \| sed s,^//,/,)
	AC_SUBST(TOPSRCDIR)
	AC_SUBST(PLAYGROUND)


	#
	# Prepare variables for po/Makefile.am
	# Note that we do not use the ususal GNU gettext make system.
	#
	# LINGUAS := The list of all translated languages taken from po/LINGUAS
	# POTFILES := The list of NSI files with translatable strings taken from
	# po/POTFILES
	# POFILES := The actual available translations (w/o directory)
	# NSIFILES := The to-be generated translation files in the NSI format.
	# (w/o directory)
	#
	-if test $dockerbuild = yes ; then
	- posrcdir=/src/po
	-else
	- posrcdir="$TOPSRCDIR/po"
	-fi
	+posrcdir=/src/po
	LINGUAS=$(sed -e "/^#/d" -e "s/#.*//" "$posrcdir/LINGUAS" \| xargs -- )
	POTFILES=$(for f in $(sed -e "/^#/d" -e "s/#.*//" "$posrcdir/POTFILES");\
	do echo "$posrcdir/$f"; done \| xargs -- )
	AC_SUBST(LINGUAS)
	AC_SUBST(POTFILES)
	POFILES=
	NSIFILES=
	for lang in $LINGUAS; do
	if test -f "$posrcdir/$lang.po" ; then
	POFILES="$POFILES $lang.po"
	NSIFILES="$NSIFILES $lang.nsi"
	fi
	done
	AC_SUBST(POFILES)
	AC_SUBST(NSIFILES)


	#
	# Packages for Gpg4Win.
	#
	if test "$build_gpg4win" = yes ; then
	gpg4win_dup_sources=""

	GPG4WIN_SPKG([zlib])

	GPG4WIN_BPKG_GTK([pkgconfig])

	GPG4WIN_SPKG([bzip2])
	GPG4WIN_SPKG([libgpg-error], [libiconv gettext])
	GPG4WIN_SPKG([libassuan], [libgpg-error])
	GPG4WIN_SPKG([scute], [libgpg-error libassuan])
	GPG4WIN_SPKG([pinentry], [qtbase libassuan libiconv])
	GPG4WIN_SPKG([gpgme], [libgpg-error libassuan])
	GPG4WIN_KDEPKG([gpgmepp], [gpgme])
	GPG4WIN_KDEPKG([qgpgme], [gpgmepp qtbase])
	GPG4WIN_SPKG([gpgol], [gpgmepp libassuan])
	GPG4WIN_SPKG([gpgex], [libassuan])
	GPG4WIN_SPKG([paperkey])
	GPG4WIN_SPKG([libiconv])
	GPG4WIN_SPKG([gettext], [libiconv])
	GPG4WIN_SPKG([libpng], [zlib])
	GPG4WIN_SPKG([jpeg])
	GPG4WIN_KDEPKG([libqrencode], [libpng libiconv])

	# Packages needed for gpgex
	GPG4WIN_SPKGEX([libgpg-error])
	GPG4WIN_SPKGEX([libassuan], [libgpg-error])
	GPG4WIN_SPKGEX([gpgex], [libassuan])
	GPG4WIN_SPKGEX([gpgme], [libgpg-error libassuan])
	GPG4WIN_CMKPKGEX([gpgmepp], [gpgme])
	GPG4WIN_SPKGEX([gpgol], [gpgmepp])

	# The GnuPG Package.
	GPG4WIN_BPKG_BINSRC([gnupg-w32])
	GPG4WIN_BPKG_MSISRC([gnupg-msi])

	# Tools required for cross compiling
	GPG4WIN_NATIVEPKG([qtbase])
	GPG4WIN_NATIVEPKG([extra-cmake-modules])
	GPG4WIN_NATIVEPKG([breeze-icons], [qtbase extra-cmake-modules])
	GPG4WIN_NATIVEPKG([qttools], [qtbase])
	GPG4WIN_NATIVEPKG([kconfig], [qtbase qttools extra-cmake-modules])

	# Qt related stuff.
	GPG4WIN_KDEPKG([zstd])
	GPG4WIN_KDEPKG([qtbase], [jpeg zlib zstd libpng freetype pcre2])
	GPG4WIN_KDEPKG([qttools], [qtbase])
	GPG4WIN_KDEPKG([qttranslations], [qtsvg qttools native-qttools])
	GPG4WIN_KDEPKG([qtsvg], [qtbase])
	GPG4WIN_KDEPKG([qthttpserver], [qtbase])
	GPG4WIN_KDEPKG([qtwebsockets], [qtbase])
	GPG4WIN_KDEPKG([tiff])
	GPG4WIN_KDEPKG([pcre2])
	GPG4WIN_KDEPKG([breeze], [qtbase kcoreaddons kconfig kconfigwidgets kguiaddons kiconthemes kwindowsystem native-kconfig])
	# GPG4WIN_KDEPKG([snoretoast])
	GPG4WIN_KDEPKG([openjpeg], [tiff jpeg])
	GPG4WIN_KDEPKG([breeze-icons], [extra-cmake-modules qtbase])
	GPG4WIN_KDEPKG([kleopatra], [kstatusnotifieritem mimetreeparser kio gnupg-w32 breeze-icons kxmlgui libkleo kitemmodels qttranslations ktextwidgets native-kconfig])
	GPG4WIN_KDEPKG([extra-cmake-modules])
	GPG4WIN_KDEPKG([kconfig], [qtbase native-qttools extra-cmake-modules])
	GPG4WIN_KDEPKG([ki18n], [qtbase gettext native-qttools extra-cmake-modules])
	GPG4WIN_KDEPKG([kwidgetsaddons], [kconfig native-qttools qtbase])
	GPG4WIN_KDEPKG([kcompletion], [kwidgetsaddons])
	GPG4WIN_KDEPKG([kwindowsystem], [qtbase native-qttools extra-cmake-modules])
	GPG4WIN_KDEPKG([kcoreaddons], [qtbase native-qttools extra-cmake-modules])
	GPG4WIN_KDEPKG([kcodecs], [qtbase native-qttools extra-cmake-modules])
	GPG4WIN_KDEPKG([kguiaddons], [qtbase native-qttools extra-cmake-modules])
	GPG4WIN_KDEPKG([kmime], [kcodecs ki18n])
	GPG4WIN_KDEPKG([kmbox], [kmime])
	GPG4WIN_KDEPKG([kconfigwidgets], [kwidgetsaddons kguiaddons ki18n kcodecs kconfig kcolorscheme])
	GPG4WIN_KDEPKG([kitemviews], [qtbase native-qttools extra-cmake-modules])
	GPG4WIN_KDEPKG([kitemmodels], [qtbase native-qttools extra-cmake-modules])
	GPG4WIN_KDEPKG([karchive], [qtbase native-qttools extra-cmake-modules])
	GPG4WIN_KDEPKG([kcrash], [kwindowsystem kcoreaddons])
	GPG4WIN_KDEPKG([solid], [native-qttools qtbase extra-cmake-modules])
	GPG4WIN_KDEPKG([kjobwidgets], [kwidgetsaddons kcoreaddons qtbase extra-cmake-modules])
	GPG4WIN_KDEPKG([kservice], [kconfig kcoreaddons ki18n])
	GPG4WIN_KDEPKG([kbookmarks], [kconfig kxmlgui kcoreaddons kconfigwidgets kwidgetsaddons kcodecs])
	GPG4WIN_KDEPKG([kio], [kcrash kjobwidgets solid kservice kbookmarks kwidgetsaddons kxmlgui kwindowsystem karchive kconfig kcoreaddons ki18n])
	GPG4WIN_KDEPKG([kiconthemes], [qtsvg kconfigwidgets karchive])
	GPG4WIN_KDEPKG([kxmlgui], [kiconthemes kconfigwidgets kitemviews ktextwidgets])
	GPG4WIN_KDEPKG([libkleo], [kmime kconfigwidgets kwindowsystem kcompletion qgpgme])
	GPG4WIN_KDEPKG([gpg4win-tools], [libkleo qgpgme])
	GPG4WIN_KDEPKG([threadweaver], [qtbase extra-cmake-modules])
	GPG4WIN_KDEPKG([kcolorscheme], [kconfig kguiaddons ki18n])
	GPG4WIN_KDEPKG([freetype], [zlib bzip2])
	GPG4WIN_KDEPKG([sonnet], [qtbase native-qttools])
	GPG4WIN_KDEPKG([ktextwidgets], [sonnet kcompletion kconfig kconfigwidgets ki18n kwidgetsaddons])
	GPG4WIN_KDEPKG([poppler], [libpng openjpeg tiff gpgmepp kio qtbase freetype])
	GPG4WIN_KDEPKG([kparts], [kio kservice kxmlgui kconfigwidgets kwidgetsaddons ktextwidgets])
	GPG4WIN_KDEPKG([okular], [kparts gpgmepp kio poppler threadweaver qtsvg native-kconfig])
	GPG4WIN_KDEPKG([libical])
	GPG4WIN_KDEPKG([kcalendarcore], [qtbase libical extra-cmake-modules])
	GPG4WIN_KDEPKG([mimetreeparser], [libkleo kwidgetsaddons ki18n kmbox kmime kcodecs kcalendarcore])
	GPG4WIN_KDEPKG([prison], [qtbase extra-cmake-modules libqrencode])
	GPG4WIN_KDEPKG([kstatusnotifieritem], [kwindowsystem qtbase extra-cmake-modules])
	GPG4WIN_KDEPKG([gpgpass], [kio prison kconfigwidgets kiconthemes ki18n qgpgme native-kconfig])
	GPG4WIN_KDEPKG([kcontacts], [kcoreaddons qtbase ki18n kconfig kcodecs])
	GPG4WIN_KDEPKG([gpgoljs],[qtwebsockets kcontacts qthttpserver mimetreeparser libkleo sonnet kcompletion ki18n kwidgetsaddons kio])

	GPG4WIN_FINALIZE
	fi

	# Packages for the AppImage
	if test "$build_appimage" = yes ; then
	appimage_dup_sources=""

	# poppler requires freetype >= 2.11
	APPIMAGE_SPKG([freetype])
	APPIMAGE_SPKG([sqlite])
	APPIMAGE_KDEPKG([libqrencode])
	# poppler requires tiff >= 4.3
	APPIMAGE_KDEPKG([tiff])
	APPIMAGE_SPKG([xcb-util-cursor])

	APPIMAGE_SPKG([libgpg-error])
	APPIMAGE_SPKG([libassuan], [libgpg-error])
	APPIMAGE_SPKG([npth])
	APPIMAGE_SPKG([libgcrypt], [libgpg-error])
	APPIMAGE_SPKG([libksba], [libgpg-error])
	APPIMAGE_SPKG([ntbtls], [libgcrypt libksba])
	APPIMAGE_SPKG([gnupg], [libgpg-error libassuan npth libgcrypt libksba sqlite ntbtls])
	APPIMAGE_SPKG([pinentry], [qtbase kguiaddons kwindowsystem])

	APPIMAGE_SPKG([gpgme], [libgpg-error libassuan])
	APPIMAGE_KDEPKG([gpgmepp], [gpgme])
	APPIMAGE_KDEPKG([qgpgme], [gpgmepp qtbase])
	APPIMAGE_SPKG([paperkey])

	# Qt related stuff.
	APPIMAGE_KDEPKG([qtbase], [freetype xcb-util-cursor])
	APPIMAGE_KDEPKG([qttools], [qtbase])
	APPIMAGE_KDEPKG([qttranslations], [qtsvg qttools])
	APPIMAGE_KDEPKG([qtsvg], [qtbase])
	APPIMAGE_KDEPKG([qtwayland], [qtbase])
	APPIMAGE_KDEPKG([wayland-protocols])
	APPIMAGE_KDEPKG([plasma-wayland-protocols], [wayland-protocols extra-cmake-modules])
	APPIMAGE_KDEPKG([breeze], [qtbase kcoreaddons kconfig kconfigwidgets kguiaddons kiconthemes kwindowsystem])

	# KDE Frameworks Tier 1
	APPIMAGE_KDEPKG([extra-cmake-modules], [qttools])
	APPIMAGE_KDEPKG([breeze-icons], [extra-cmake-modules qtbase])
	APPIMAGE_KDEPKG([karchive], [qtbase qttools extra-cmake-modules])
	APPIMAGE_KDEPKG([kauth], [qtbase qttools extra-cmake-modules])
	APPIMAGE_KDEPKG([kcodecs], [qtbase qttools extra-cmake-modules])
	APPIMAGE_KDEPKG([kcolorscheme], [kconfig kguiaddons ki18n])
	APPIMAGE_KDEPKG([kconfig], [qtbase qttools extra-cmake-modules])
	APPIMAGE_KDEPKG([kcoreaddons], [qtbase qttools extra-cmake-modules])
	APPIMAGE_KDEPKG([kdbusaddons], [qtbase qttools extra-cmake-modules])
	APPIMAGE_KDEPKG([kguiaddons], [qtbase qttools extra-cmake-modules])
	APPIMAGE_KDEPKG([ki18n], [qtbase qttools extra-cmake-modules])
	APPIMAGE_KDEPKG([kitemmodels], [qtbase qttools extra-cmake-modules])
	APPIMAGE_KDEPKG([kitemviews], [qtbase qttools extra-cmake-modules])
	APPIMAGE_KDEPKG([kwindowsystem], [qtbase qtwayland extra-cmake-modules wayland-protocols plasma-wayland-protocols])
	APPIMAGE_KDEPKG([solid], [qtbase extra-cmake-modules])
	APPIMAGE_KDEPKG([sonnet], [qtbase extra-cmake-modules])
	APPIMAGE_KDEPKG([threadweaver], [qtbase extra-cmake-modules])

	# KDE Frameworks Tier 2
	APPIMAGE_KDEPKG([kcompletion], [kwidgetsaddons])
	APPIMAGE_KDEPKG([kcrash], [kwindowsystem kcoreaddons])
	APPIMAGE_KDEPKG([kjobwidgets], [kwidgetsaddons kcoreaddons qtbase extra-cmake-modules])
	APPIMAGE_KDEPKG([kstatusnotifieritem], [kwindowsystem qtbase extra-cmake-modules])
	APPIMAGE_KDEPKG([kwidgetsaddons], [kconfig qttools qtbase])

	# KDE Frameworks Tier 3
	APPIMAGE_KDEPKG([kconfigwidgets], [kwidgetsaddons kguiaddons ki18n kcodecs kconfig])
	APPIMAGE_KDEPKG([kiconthemes], [qtsvg kconfigwidgets karchive])
	APPIMAGE_KDEPKG([ktextwidgets], [sonnet kcompletion kconfig kconfigwidgets ki18n kwidgetsaddons])
	APPIMAGE_KDEPKG([kxmlgui], [kiconthemes kconfigwidgets kitemviews ktextwidgets breeze])
	APPIMAGE_KDEPKG([kbookmarks], [kconfig kxmlgui kcoreaddons kconfigwidgets kwidgetsaddons kcodecs])
	APPIMAGE_KDEPKG([kservice], [kconfig kcoreaddons ki18n])
	APPIMAGE_KDEPKG([kio], [kcrash kjobwidgets solid kservice kbookmarks kwidgetsaddons kxmlgui kwindowsystem karchive kconfig kcoreaddons ki18n kauth])
	APPIMAGE_KDEPKG([kparts], [kio kservice kxmlgui kconfigwidgets kwidgetsaddons ktextwidgets])

	# KDE PIM
	APPIMAGE_KDEPKG([libical])
	APPIMAGE_KDEPKG([kcalendarcore], [qtbase libical extra-cmake-modules])
	APPIMAGE_KDEPKG([mimetreeparser], [libkleo kwidgetsaddons ki18n kmime kcodecs kcalendarcore kmbox])
	APPIMAGE_KDEPKG([kmime], [kcodecs ki18n])
	APPIMAGE_KDEPKG([kmbox], [kmime])
	APPIMAGE_KDEPKG([libkleo], [kmime kconfigwidgets kwindowsystem kcompletion qgpgme])

	APPIMAGE_KDEPKG([kleopatra], [mimetreeparser qgpgme breeze-icons kio kxmlgui libkleo kitemmodels qttranslations kdbusaddons kstatusnotifieritem])

	# Okular/Poppler
	APPIMAGE_KDEPKG([poppler], [gpgmepp kio qtbase freetype tiff])
	APPIMAGE_KDEPKG([okular], [kparts gpgmepp kio poppler threadweaver qtsvg])

	# Gpgpass
	APPIMAGE_KDEPKG([prison], [qtbase extra-cmake-modules libqrencode])
	APPIMAGE_KDEPKG([gpgpass], [kio prison kconfigwidgets kiconthemes ki18n qgpgme])
	APPIMAGE_FINALIZE
	fi

	# Throw an error if required tools are missing
	if test -n "$missing_tools"; then
	for i in $missing_tools; do
	AC_MSG_NOTICE([$i is missing])
	done
	AC_MSG_ERROR([[
	***
	*** Required tools not found. Please consult the above messages
	*** and install them before running configure again.
	***]])
	fi

	# Throw an error if any duplicate source packages have been found The
	# packages_dirpfx is set depending on whether we are running under
	# docker. See also GPG4WIN_PACKAGES.
	packages_dirpfx=
	test -f /src/packages/BUILDTYPE && packages_dirpfx=/src/
	packages_files=${packages_dirpfx}packages/packages.list
	if test -n "$gpg4win_dup_sources"; then
	tmp=
	for i in $gpg4win_dup_sources; do
	tmp="$tmp
	$i"
	done
	tmp2="
	You might remove them with:"
	for i in $gpg4win_rm_candidates; do
	if ! grep -q $(basename $i) $packages_files; then
	tmp2="$tmp2
	rm $i"
	fi
	done
	AC_MSG_ERROR([Packages with more that one source version:$tmp$tmp2])
	fi

	if test -n "$appimage_dup_sources"; then
	tmp=
	for i in $appimage_dup_sources; do
	tmp="$tmp
	$i"
	done
	tmp2="
	You might remove them with:"
	for i in $appimage_rm_candidates; do
	if ! grep -q $(basename $i) $packages_files; then
	tmp2="$tmp2
	rm $i"
	fi
	done
	AC_MSG_ERROR([Packages with more that one source version:$tmp$tmp2])
	fi

	# Finalize.

	AC_CONFIG_FILES(Makefile)
	AC_CONFIG_FILES(packages/Makefile src/Makefile po/Makefile)
	AC_CONFIG_FILES(src/nsis/config.nsi src/gpg4win.mk)
	AC_CONFIG_FILES(doc/Makefile)
	AC_CONFIG_FILES(doc/logo/Makefile)
	AC_CONFIG_FILES(src/qt.conf)
	AC_CONFIG_FILES(src/toolchain.cmake)
	AC_CONFIG_FILES(src/toolchain-ex.cmake)
	AC_CONFIG_FILES(src/toolchain-native.cmake)
	AC_CONFIG_FILES(src/appimage/Makefile src/appimage/appimage.mk)
	AC_CONFIG_FILES(src/appimage/rsync-filters/Makefile)
	AC_CONFIG_FILES(src/nsis/Makefile)
	AC_CONFIG_FILES(src/versioninfo.rc.in)
	AC_CONFIG_FILES(src/gpg4win.w32-manifest.in)

	AC_CONFIG_FILES(src/gccwrap.sh)
	AC_CONFIG_COMMANDS([chmod],[chmod +x src/gccwrap.sh])

	AC_OUTPUT

	# Throw a warning if optional tools are missing
	if test -n "$missing_opt_tools"; then
	AC_MSG_WARN([[
	***
	*** Some tools not found. They may or may not be needed depending on
	*** the packages you want to include. For example GLIB and GTK+
	*** require certain tools; you may need to install a recent version of
	*** GLIB and GTK+ on the build machine to allow for cross-compiling.
	***]])
	for i in $missing_opt_tools; do
	AC_MSG_NOTICE([$i is missing])
	done
	fi

	echo -n "
	$PACKAGE_NAME-$PACKAGE_VERSION prepared for make

	+ MSI version ..: ${MSI_VERSIONSTRING}
	Revision .....: ${GIT_REVISION} (${GIT_REVISION_DEC})
	Main platform : $host
	Extra platform: ${GPGEX_ADD_HOST}
	Distribution .: ${PRODUCT_NAME} (mym4_buildtype)
	Source dir ...: ${TOPSRCDIR}
	Build dir ....: ${PLAYGROUND}
	"
	if test -n "$JOBS"; then
	echo " make jobs ....: ${JOBS}"
	else
	echo ""
	fi
	diff --git a/packages/download.sh b/packages/download.sh
	index da15cde4..0827e301 100755
	--- a/packages/download.sh
	+++ b/packages/download.sh
	@@ -1,339 +1,347 @@
	#!/bin/sh
	# download.sh - Download source and binary packages for GPG4Win.
	# Copyright (C) 2005, 2007 g10 Code GmbH
	#
	# This file is part of Gpg4win.
	#
	# Gpg4win is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 2 of the License, or
	# (at your option) any later version.
	#
	# Gpg4win is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License
	# along with this program; if not, write to the Free Software
	# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA

	# Syntax of the packages.current file:
	#
	# If the first non whitespace character of a line is #, the line is
	# considered a comment. If the first word of a line is "server", the
	# rest of the line will be taken as the base URL for following file
	# commands. If the first word of a line is "file" the rest of the
	# line will be appended to the current base URL (with a / as
	# delimiter). Checksums are sha256 sums.
	#
	# A simple conditionals mechanism is impleted using the keywords if
	# and fi with the operators = and !=.
	#
	# Example:
	#
	# # GnuPG stuff.
	# server ftp://ftp.gnupg.org/gcrypt
	#
	# file gnupg/gnupg-1.4.2.tar.gz
	# chk 1e92b39ef4f4cdf3b1849b6f824dd8f160276aa5c9718be35f8a7bd190bf6154
	#


	usage()
	{
	cat <<EOF
	Usage: $0 [OPTIONS]
	Options:
	[--force] Download packages even if they exist.
	[--quiet]
	[--ipv4]
	[--ipv6]
	[--dry-run] Do not download - just check
	[--clean] Do not download but remove downloaded files.
	[--update] Remove old files with the same name.
	- [--gnupg22] Build using GnuPG 2.2
	- [--gnupg26] Build using GnuPG 2.6 (default)
	EOF
	exit $1
	}


	force=no
	quiet=no
	ipvx=
	clean=no
	dryrun=no
	update=no
	-gnupgtag=gnupg26
	+gnupgtag=
	#keep_list=no
	#sig_check=yes
	while [ $# -gt 0 ]; do
	case "$1" in
	--=)
	optarg=`echo "$1" \| sed 's/[-_a-zA-Z0-9]*=//'`
	;;
	*)
	optarg=""
	;;
	esac

	case $1 in
	--force)
	force=yes
	;;
	--keep-list)
	# Now a dummy
	# keep_list=yes
	;;
	--no-sig-check)
	# Now a dummy
	sig_check=no
	;;
	--quiet)
	quiet=yes
	;;
	--ipv4)
	ipvx="-4"
	;;
	--ipv6)
	ipvx="-6"
	;;
	--clean)
	clean=yes
	;;
	--dry-run\|-n)
	dryrun=yes
	;;
	--update\|-u)
	update=yes
	;;
	- --gnupg22)
	- gnupgtag=gnupg22
	- ;;
	- --gnupg26)
	- gnupgtag=gnupg26
	- ;;
	*)
	usage 1 1>&2
	;;
	esac
	shift
	done


	WGET="wget $ipvx"

	# We used to download the packages.current list but it turned out that
	# this is too problematic: As there is no history of these files it is
	# not possible to build and older version of gpg4win using the online
	# version of the list. Thus we keep the list now with the installer
	# and in case a package update is required we will post an updated
	# list to the mailing list.
	#
	#url="http://www.gpg4win.org"
	#if [ "$keep_list" = "no" ]; then
	# echo "downloading packages list from \`$url'."
	# if ! ${WGET} -N -q $url/packages.current{,.sig} ; then
	# echo "download of packages list failed." >&2
	# exit 1
	# fi
	#fi
	#
	#if [ "$sig_ckeck" = yes ]; then
	# if ! gpgv --keyring ./packages.keys packages.current.sig packages.current
	# then
	# echo "list of packages is not usable." >&2
	# exit 1
	# fi
	#fi

	packages="packages.list"

	+buildtype="$(head -1 ./BUILDTYPE 2>/dev/null\|\| echo default)"
	+[ "$buildtype" = default ] && buildtype=gpg4win
	+case "$buildtype" in
	+ vsd3) gnupgtag=gnupg22 ;;
	+ vsd) gnupgtag=gnupg26 ;;
	+ gpd) gnupgtag=gnupg26 ;;
	+ gpg4win\|default) gnupgtag=gnupg26 ;;
	+ *)
	+ echo "No valid BUILDTYPE file" >&2
	+ echo "Put vsd3, vsd, gpd or gpg4win into ./BUILDTYPE" >&2
	+ exit 1
	+ ;;
	+esac
	+echo "configured for \"$buildtype\"" >&2
	+
	+
	actually_downloaded=

	lnr=0
	name=
	condfalse=
	[ $clean = yes ] && rm -f '.#download.v*'
	[ -f '.#download.failed' ] && rm '.#download.failed'
	[ -f '.#download.worked' ] && rm '.#download.worked'
	[ -f '.#download.current_packages' ] && rm '.#download.current_packages'
	[ -f '.#download.stale_packages' ] && rm '.#download.stale_packages'
	cat $packages \| \
	while read key value valuetwo valuethree; do
	: $(( lnr = lnr + 1 ))/read
	[ -z "$key" ] && continue
	if [ "$key" = "fi" ]; then
	condfalse=
	key="#"
	fi
	[ -n "$condfalse" ] && continue
	case "$key" in
	\#*)
	;;
	"if")
	if [ "$value" = "gnupg" -a "$valuetwo" = "=" ]; then
	if [ "$valuethree" != "$gnupgtag" ]; then
	condfalse=yes
	fi
	elif [ "$value" = "gnupg" -a "$valuetwo" = "!=" ]; then
	if [ "$valuethree" = "$gnupgtag" ]; then
	condfalse=yes
	fi
	fi
	;;
	server)
	server="$value"
	name=
	;;
	name)
	if [ -z "$value" ]; then
	echo "syntax error in name statement, line $lnr" >&2
	exit 1
	fi
	name="$value"
	[ $quiet = no ] && echo "using name \`$name'"
	;;
	file)
	if [ -z "$value" ]; then
	echo "syntax error in file statement, line $lnr" >&2
	exit 1
	fi
	if [ -z "$server" ]; then
	echo "no server location for file \`$value', line $lnr" >&2
	exit 1
	fi
	url="$server/$value"
	if [ -z "$name" ]; then
	name=`basename "$value"`
	fi
	echo "$name" >> '.#download.current_packages'

	if [ "$clean" = "yes" ]; then
	[ $quiet = no ] && echo "Removing: $name"
	rm -f $name
	elif [ -s "$name" -a "$force" = "no" ]; then
	[ $quiet = no ] && echo "package \`$url' ... already exists"
	elif [ $dryrun = yes ]; then
	echo "skipping download of \`$url' ... --dry-run active"
	else
	if [ "$update" = "yes" ]; then
	pkg=$(echo "$name" \| cut -d- -f1)
	pkg2=$(echo "$name" \| cut -d- -f2)
	if [ "$pkg2" = "w32" -o "$pkg2" = "msi" -o "$pkg2" = "icons" ]; then
	pkg=$(echo $pkg-$pkg2);
	fi
	pkgsuffix=$(echo "$name" \| rev \| cut -d. -f1 \| rev)
	if [ -n "$pkg" -a -n "$pkgsuffix" ]; then
	if ls ${pkg}*.$pkgsuffix > /dev/null 2>&1; then
	[ $quiet = no ] && echo "Removing "${pkg}*.$pkgsuffix";"
	rm ${pkg}*.$pkgsuffix;
	fi
	fi
	fi
	echo -n "downloading \`$url' ..."
	if ${WGET} -c -q "$url" -O "$name" ; then
	if [ $(stat -c'%s' "$name" 2>/dev/null \|\| echo 0) -eq 0 ]; then
	echo " FAILED (line $lnr)"
	echo "line $lnr: $url has zero length" >> '.#download.failed'
	else
	echo " okay"
	echo "$url" >> '.#download.worked'
	fi
	else
	echo " FAILED (line $lnr)"
	echo "line $lnr: downloading $url failed" >> '.#download.failed'
	fi
	fi
	;;
	link)
	if [ -z "$value" ]; then
	echo "syntax error in file statement, line $lnr" >&2
	exit 1
	fi
	if [ -z "$name" ]; then
	echo "no name for link in line $lnr" >&2
	exit 1
	fi
	echo "$value" >> '.#download.current_packages'

	if [ $clean = yes ]; then
	[ $quiet = no ] && echo "Removing link: $value"
	rm -f $value
	elif [ -f "$value" -a "$force" = "no" ]; then
	[ $quiet = no ] && echo "package \`$value' ... already exists"
	else
	if [ "$update" = "yes" ]; then
	pkg=$(echo "$value" \| cut -d- -f1)
	pkg2=$(echo "$value" \| cut -d- -f2)
	if [ "$pkg2" = "w32" -o "$pkg2" = "msi" -o "$pkg2" = "icons" ]; then
	pkg=$(echo $pkg-$pkg2);
	fi
	pkgsuffix=$(echo "$name" \| rev \| cut -d. -f1 \| rev)
	if [ -n "$pkg" -a -n "$pkgsuffix" ]; then
	if ls ${pkg}*.$pkgsuffix > /dev/null 2>&1; then
	[ $quiet = no ] && echo "Removing link "${pkg}*.$pkgsuffix";"
	rm ${pkg}*.$pkgsuffix;
	fi
	fi
	fi
	echo -n "linking \`$value' to \`$name' ..."
	if ln -f "$name" "$value"; then
	echo " okay"
	else
	echo " FAILED (line $lnr)"
	echo "line $lnr: linking $value failed" >> '.#download.failed'
	fi
	fi
	;;
	chk)
	if [ $clean = yes ]; then
	name=
	continue
	fi
	if [ -z "$value" ]; then
	echo "syntax error in chk statement, line $lnr" >&2
	exit 1
	fi
	if [ -z "$name" ]; then
	echo "no file name for chk statement, line $lnr" >&2
	exit 1
	fi
	[ $quiet = no ] && echo -n "checking \`$name' ..."
	if echo "$value *$name" \| sha256sum -c --status ; then
	[ $quiet = no ] && echo " okay"
	else
	[ $quiet = no ] && echo " FAILED (line $lnr)"
	[ $quiet = no ] \|\| echo "checking \`$name' FAILED (line $lnr)"
	echo "line $lnr: checking $name failed" >> '.#download.failed'
	fi
	name=
	;;
	*)
	echo "syntax error in \`$packages', line $lnr." >&2
	exit 1
	esac
	done
	[ $dryrun = yes ] && echo "Note: option --dry-run was used" >&2
	if [ -f '.#download.worked' ]; then
	echo "Actually downloaded files:" >&2
	cat '.#download.worked' >&2
	fi
	if [ -f '.#download.failed' ]; then
	cat '.#download.failed' >&2
	rm '.#download.failed'
	echo "some files failed to download or checksums are not matching" >&2
	exit 1
	fi

	# check for stale packages
	for p in $(ls .xz .gz .bz2 .wixlib .exe .zip); do
	if ! grep -q $p '.#download.current_packages'; then
	echo "rm $p" >> '.#download.stale_packages'
	fi
	done
	if [ -f '.#download.stale_packages' ]; then
	echo "Warning: Stale packages were found. Remove them with" >&2
	cat '.#download.stale_packages' >&2
	fi

File Metadata

Mime Type: text/x-diff
Expires: Thu, Feb 26, 7:06 PM (9 h, 14 m)
Storage Engine: local-disk
Storage Format: Raw Data
Storage Handle: 89/9c/eecef9c9b2e4da4c37d365bbdd01

No OneTemporaryActions

View Options

File Metadata

Event Timeline

No OneTemporary
Actions