Can you please try again with the standard shell (and not the power shell)?

Hello Werner and other participants,

The question is how to detect whether v4 or v6 is supported. Most systems support both versions but that does not mean that they can actually be used (i.e. due to improper setup or no connectivity). Even the "address family" not supported can be due to a missing kernel module and thus be a transient error message.

I agree with @kristianf that dirmngr should be more clever about this sort of failure. The error message could be clearer at least, but the right response is really to skip all IPv4 addresses if the machine has no IPv4 stack, and to skip all IPv6 addresses if the machine has no IPv6 stack.

The workaround I've found is to put:

Thanks, that is interesting info, I need to look into that.

I spoke with the author of onionbalance, and they said:

I'm not entirely sure whether it is due to low usage or little problems with the service, but it seems to work pretty OK. My primary concern is that as opposed to DNS based system, the onionbalance system requires my node to be running and available and as such constitutes a SPOF. Although I've cleaned up my scripts sufficiently, e.g network outage will make this service unavailable whereby the hkps pool will continue to function.

Do you mean this?

No, there isn't any error message or output, and it not accept any input.
Here is a GIF capture, but may not helpful.

dirmngr is meanwhile an integral part of GnuPG. The old 1.1 dirmngr is entire obsosolete and won't do what gpg expects from it. To better diagnose the problem you can do this:

Well, I'm able to reproduce this issue on Parabola. I was also get a different error when I turn off my vpn: `server indicated a failure```, but now I get the dns error again.

elonsatoshi@tyger ~> gpg -vvv --debug-level guru --search elonsatoshi@riseup.net
gpg: using character set 'utf-8'
gpg: enabled debug flags: packet mpi crypto filter iobuf memory cache memstat trust hashing ipc clock lookup extprog
gpg: DBG: [not enabled in the source] start
gpg: DBG: chan_3 <- # Home: /home/elonsatoshi/.gnupg
gpg: DBG: chan_3 <- # Config: [none]
gpg: DBG: chan_3 <- OK Dirmngr 2.1.23 at your service
gpg: DBG: connection to the dirmngr established
gpg: DBG: chan_3 -> GETINFO version
gpg: DBG: chan_3 <- D 2.1.23
gpg: DBG: chan_3 <- OK
gpg: DBG: chan_3 -> KEYSERVER --clear hkps://pgp.mit.edu/
gpg: DBG: chan_3 <- OK
gpg: DBG: chan_3 -> KS_SEARCH -- elonsatoshi@riseup.net
gpg: DBG: chan_3 <- ERR 167772876 Connection closed in DNS <Dirmngr>
gpg: error searching keyserver: Connection closed in DNS
gpg: keyserver search failed: Connection closed in DNS
gpg: DBG: chan_3 -> BYE
gpg: DBG: [not enabled in the source] stop
gpg: keydb: handles=0 locks=0 parse=0 get=0
gpg:        build=0 update=0 insert=0 delete=0
gpg:        reset=0 found=0 not=0 cache=0 not=0
gpg: kid_not_found_cache: count=0 peak=0 flushes=0
gpg: sig_cache: total=0 cached=0 good=0 bad=0
gpg: random usage: poolsize=600 mixed=0 polls=0/0 added=0/0
              outmix=0 getlvl1=0/0 getlvl2=0/0
gpg: rndjent stat: collector=0x0000000000000000 calls=0 bytes=0
gpg: secmem usage: 0/32768 bytes in 0 blocks
elonsatoshi@tyger ~> sudo rc-service openvpn stop
[sudo] password for elonsatoshi: 
 * WARNING: openvpn is already stopped
elonsatoshi@tyger ~> pidof openvpn
elonsatoshi@tyger ~> gpg -vvv --debug-level guru --search elonsatoshi@riseup.net
gpg: using character set 'utf-8'
gpg: enabled debug flags: packet mpi crypto filter iobuf memory cache memstat trust hashing ipc clock lookup extprog
gpg: DBG: [not enabled in the source] start
gpg: DBG: chan_3 <- # Home: /home/elonsatoshi/.gnupg
gpg: DBG: chan_3 <- # Config: [none]
gpg: DBG: chan_3 <- OK Dirmngr 2.1.23 at your service
gpg: DBG: connection to the dirmngr established
gpg: DBG: chan_3 -> GETINFO version
gpg: DBG: chan_3 <- D 2.1.23
gpg: DBG: chan_3 <- OK
gpg: DBG: chan_3 -> KEYSERVER --clear hkps://pgp.mit.edu/
gpg: DBG: chan_3 <- OK
gpg: DBG: chan_3 -> KS_SEARCH -- elonsatoshi@riseup.net
gpg: DBG: chan_3 <- ERR 167772876 Connection closed in DNS <Dirmngr>
gpg: error searching keyserver: Connection closed in DNS
gpg: keyserver search failed: Connection closed in DNS
gpg: DBG: chan_3 -> BYE
gpg: DBG: [not enabled in the source] stop
gpg: keydb: handles=0 locks=0 parse=0 get=0
gpg:        build=0 update=0 insert=0 delete=0
gpg:        reset=0 found=0 not=0 cache=0 not=0
gpg: kid_not_found_cache: count=0 peak=0 flushes=0
gpg: sig_cache: total=0 cached=0 good=0 bad=0
gpg: random usage: poolsize=600 mixed=0 polls=0/0 added=0/0
              outmix=0 getlvl1=0/0 getlvl2=0/0
gpg: rndjent stat: collector=0x0000000000000000 calls=0 bytes=0
gpg: secmem usage: 0/32768 bytes in 0 blocks

In T3331#101967, @werner wrote:

If you don't have a TCP enabled OS, you can use configure --disable-dirmngr.

I see your point.

BTW, dirmngr has an option --disable-ipv4.

If you don't have a TCP enabled OS, you can use configure --disable-dirmngr.

why should it wait for the timeout in the pselect call? shouldn't it be able to respond immediately to the final connection closing?

FWIW, using a Debian specific thing is not portable and Unix sockets won't work on Windows. Thus using the standard localhost connection is simpler than adding extra complexity.

Okay, I implemented the second part and Tor is now used if availabale.
--no-use-tor disables Tor.
--use-tor forces use Tor and can't be reset.

Sufficient workarounds have been found.

It takes a couple of seconds for dirmngr to terminate after closing the last connection, maybe due to the timeout in the pselect call. Apart from that, it works as expected.

Fixed in e7fc6e3bf0eb6ffe53e1f099d28ce45cef4a8a87.

Implemented in da91d2106a17c796ddb066a34db92d33b21c81f7.

Fixed in b231959728a0056094134e0fca8cc916c24ef37e.

Agreed, i think the OP is asking for X when he wants Y, so that makes this request a little bit strange.

Note that the documentation clearly says that --nameserver expects an ip address. Now we could make it accept a port too, but that would not make the OP happy, as he wants to talk to localhost, but in tor mode, all dns requests are routed through tor (this is actually one of the main motivations for using a custom DNS resolver).

This works now, there have been many changes in how homedir is handled since then. For example 70a8584ec4389209762eb65bb77f20f7881577be and aab8a0b05292b0d06e3001a0b289224cb7156dbd, among many others.

Digicert TERENAPersonalCA3 doesn't use issuingDistributionPoint anymore. It's hard to survey CRLs that are actually in use, so I don't know if there are other important users, but the fact that nobody else reported such problems is an indication that it is not widely used among dirmngr users. Supporting this is a lot of work, because it makes validating certificates much more complicated, so this is unlikely to happen without strong motivation, so I am closing this here.

I added a new task status "Testing".

On Wed, 28 Jun 2017 15:47, noreply@dev.gnupg.org said:

What tests do you want to be done?

What tests do you want to be done?

Given that we have no TESTING status, the only way I can handle this is by keeping the ticket open and add the TESTING flag. Closing a bug which has not been tested is a bad idea.

@werner An open ticket should mean there is something that can be acted upon. Unless you are saying that we should actively look for regressions or should actively do more testing, this ticket should be closed now. There is plenty of peripheral information that will remind us of this ticket in case more issues resurface related to this change.

Any update on this?

Libgcrypt 1.6 reaches EOL in 7 days, so we won't fix it.

This is such a large change that I feel uneasy to close the bug before we know that there are no regressions. This Means we need to wait whether the next release will break.

Fixed in 48aae8167dcae80d43b08167a88d9eb170781a04.

This is fixed now. The fix 15d2a009931f44a60b9df6325f837add208459d6 should be easy to backport.

Problem with your DNS server We had a similar bug report here or on the ML. IIRC the DNS does not do what it is supposed to do. Need to lookup the details.

@werner I've done the changes you suggested. This is what I get in dirmngr.log:

Given that this is just a warning, we should not consider it a bug.

Please add

Dirmngr uses its own resolver for these reasons:

debian stretch's 2.1.18 also suffers from this (debian bug tracker). As there is only 13 days left for fixing issues in stretch, swift action is needed.

Just as a remainder: unlike Arch, Debian has gnupg and dirmngr in 2 different packages. The bug is in dirmngr.

I'm using 2.1.21-2 from the debian experimental build, and i'm not seeing this misbehavior.

Fixed in 2.1.21.

Automatic creation of socket directories creates cleanup trouble for projects previously relying on the agent-shutdown if $GNUPGHOME is removed: https://notmuchmail.org/pipermail/notmuch/2017/024550.html

This seems to work just fine on our archlinux box with the nsswitch configuration above.

Justus, will you please so kind and take care of this.

https://developer.apple.com/library/content/documentation/Networking/Conceptual/Open_Directory/openDirectoryConcepts/openDirectoryConcepts.html

Thanks for your confirmation. I pushed the commit.

You're right this function is the culprit. The

I suspect compiler optimization.
If you are with debugger, please check the function dns_ai_setent in dns.c.
When type==DNS_T_A, it sets sin_family = AF_INET. But it does some violent memory access for modern C.
Then, the value is accessed through saddr->sa_family.
I wonder if (*ent)->ai_family is correctly set here.

This is what I see in gdb after the host resolution is called:

The machine is x86_64 qemu-kvm virtual on x86_64 host.