If you are on Linux you may simply remove the socket files and the daemons will
terminate.

On Tue, Nov 29, 2016 at 7:14 PM, Werner Koch via BTS <gnupg@bugs.g10code.com>
wrote:

[...]
thanks for the clarifications, I was 95% there but that rounds it up to the full
picture.

   GNUPGHOME=$(pwd) gpg-agent --daemon -v MYSCRIPT

This starts the agents and runs MYSCRIPT (/bin/sh is nice for testing). After
MYSCRIPT terminates the agent will be terminated within the next minute.

We more or less do that already, and I can confirm it does "terminate the next
minute".
Unfortunately "the next minute" isn't soon enough for my umount.

So I thought for now I might have to rely on an extra call of "gpgconf --kill
dirmngr" to be sure. But I have found that this doesn't end it for me - maybe
related to our custom GNUPGHOME?
It doesn't seem to stop as intended via gpgconf: (neither with nor without
GNUPGHOME):

$ ps axlf | egrep 'gpg|dirmngr'
1 0 18021 1 20 0 176840 6236 - Ssl ? 0:00 dirmngr --
daemon --homedir /tmp/tmped9zl1ip
$ gpgconf --kill dirmngr
$ ps axlf | egrep 'gpg|dirmngr'
1 0 18021 1 20 0 176840 6236 - Ssl ? 0:00 dirmngr --
daemon --homedir /tmp/tmped9zl1ip
$ GNUPGHOME="/tmp/tmped9zl1ip" gpgconf --kill dirmngr
$ ps axlf | egrep 'gpg|dirmngr'
1 0 18021 1 20 0 176840 6236 -
(Also did the same as root without effect, but avoid filling this report only
with logs)

The more obvious but less graceful "sudo killall dirmngr |:" cleans it up.

The reason why your bind mount fails are likely the socket files created there.

via lsof I only found the following to be related (the /dev bind umount is what
fails).
dirmngr 6771 root 1r CHR LG,0x80000 1,9 0t0
11 /tmp/tmptmucmfm0/target/dev/urandom
dirmngr 6771 root 2w CHR W,LG 1,3 0t0
6 /tmp/tmptmucmfm0/target/dev/null
gpg-agent 6776 root 0r CHR LG 1,3 0t0
6 /tmp/tmptmucmfm0/target/dev/null
gpg-agent 6776 root 1w CHR W,LG 1,3 0t0
6 /tmp/tmptmucmfm0/target/dev/null
gpg-agent 6776 root 2w CHR W,LG 1,3 0t0
6 /tmp/tmptmucmfm0/target/dev/null

Not sure, but I'd not expect these are the sockets.
My assumption would be the open /dev/urandom - especially as I found that I only
need to get rid of dirmngr to proceed.

The solution to this are //run/user based sockets. If you create a directory
/run/user/UID gnupg will create a gnupg sub-directory and place the socket
files there.

gpg-conf --list-dirs

can be used to check that.

I created a log based on that check and lsof (the view from inside the chroot):
gpgconf --list-dirs
lsof +fg /dev
gpgconf --kill dirmngr
lsof +fg /dev
pkill gpg-agent
pkill dirmngr
lsof +fg /dev

I'll attach the full log with this post.
You can find there that the agent and dirmngr do not go away on the gpgconf --
kill.
The socket path OTOH looks ok with "agent-socket:/root/.gnupg/S.gpg-agent"

I added this as first command in chroot to give it a try at least:
$ mkdir -p /run/user/$(id -u)
It "worked" in the sense that the dirs changed e.g. from:
dirmngr-socket:/root/.gnupg/S.dirmngr
to
dirmngr-socket:/run/user/0/gnupg/S.dirmngr
But as I expected that did not change the behavior of blocking to umount the /dev

I really think it is not the sockets but e.g. the /dev/urandom it keeps open.

Is there any way to get the agent&dirmngr from "away next minute" to be "away
before exiting the calling command"?

BTW - I wondered if it would be enough if gpg-agent can stay and to only kill
dirmngr - but it seems I need both gone to let me umount.

While looking at the problem I found a corner case related to a shutdown and
fixed that.

I also tried to close the listening socket after the first shutdown event. I
reverted that because the effect is that a client trying to connect immediately
gets a failure and then starts a new dirmngr - which is not the idea of a shutdown.

The man pages notes:

SIGTERM

   Shuts down the process but waits until all current requests are
   fulfilled.  If the process has received 3  of these signals
   and requests are still pending, a shutdown is forced.  You may
   also use
         gpgconf --kill dirmngr
   instead of this signal

thus this is by design and identical to what gpg-agent does. IIRC, there was a
regression for some time, fixed in 2.1.16. So this fixed regression is what you
see as a bug.

However, the process should not anymore listen for new connections as soon as a
shutdown is pending. That needs to be fixed.

The agent is not directly involved in keyserver lookups. Instead the dirmngr is
spawned and does this for you. In fact, all network access goes through dirmngr.
However the agent is a mandatory part of gnupg-2 - all private keys are
processed solely by the agent. Thus removing the agent is not an option.
In your case the agent is launched to check whether a private key is available
for an imported public key.

You can stop the agent or the dirmngr using "gpgconf --kill dirmngr"
("gpg-agent"). For your use case a better solution will be to run your script
under the control of the agent (ie. explicily starting the agent):

  GNUPGHOME=$(pwd) gpg-agent --daemon -v MYSCRIPT

This starts the agents and runs MYSCRIPT (/bin/sh is nice for testing). After
MYSCRIPT terminates the agent will be terminated within the next minute.

The reason why your bind mount fails are likely the socket files created there.
I had the same problem with my g13 based disk encryption. The solution to this
are //run/user based sockets. If you create a directory /run/user/UID gnupg
will create a gnupg sub-directory and place the socket files there.

gpg-conf --list-dirs

can be used to check that.

Patch 0001 should be applied to 2.3

Please do not use "checking-upstream-swdb" patch.

Sure, for Debian and other distros the version number is of no use and should
not be used (I am still annoyed by xlockscreen thing). However disabling this
in dirmngr is the wrong approach. It should be disabled in tools which actually
use that service (e.g. KMail). The SWDB file carries more version information
than just GPA and is thus useful for developers who build their own version of
GPA or their own Windows installer. It has also nothing to do with the wakeups.

Having a dirmngr installed which does not work as described is a bad idea.

BTW: although we won't be able to implement key retrieval queueing into dirmngr
(e.g. for use with --auto-key-retrieve) in time for the Debain freeze, we will
add this later so that it may be available in a later point release. Obviously
this needs regualr wakeups to test for network connectivity and to process the
queue.

I just pushed the LDAP reaper patch for 2.1.17.

The LDAP stuff is mainly used for CRLs and is often hard to deploy because often
proxies are needed etc. I don't know a public one which is reliable enough for
testing. The one I used mostly was related to certain smartcards but those
cards expire faster than software can be deployed. Fortunately most public CRLs
are available via HTTP.

Another use are LDAP keyservers. I do not know a public service, Some
keyserver operators run them privately and Ireply on them to test GnUPG's support.

I've updated the patch series here to the series we're using in debian for 2.1.16.

D389: 918_0005-dirmngr-Drop-useless-housekeeping.patch

D390: 917_0004-dirmngr-Avoid-automatically-checking-upstream-swdb.patch

D391: 916_0003-dirmngr-Lazily-launch-ldap-reaper-thread.patch

D392: 915_0002-dimrngr-Avoid-need-for-hkp-housekeeping.patch

D393: 914_0001-dirmngr-hkp-Avoid-potential-race-condition-when-some.patch

In practice, dirmngr from git master still wakes up every few seconds due to the
ldap-reaper thread, even if no connections to ldap have ever happened.

the patch dirmngr-Lazily-launch-ldap-reaper-thread.patch avoids this additional
wakeup at least for those dirmngr instances that have never used LDAP.

This has been changed in 2.1.16 to happen only every minute. Along with the
wakeup being done at the full second (as has been agreed upon for other
daemons), this should be more of an annoyance than a real problem.

We're shipping these patches in debian unstable as of 2.1.15-9.

D394: 912_0145-dirmngr-Lazily-launch-ldap-reaper-thread.patch

D395: 911_0144-dirmngr-Drop-useless-housekeeping.patch

D396: 910_0143-dimrngr-Avoid-need-for-hkp-housekeeping.patch

D397: 909_0142-dirmngr-hkp-Avoid-potential-race-condition-when-some.patch

D398: 908_0141-dirmngr-More-win32-system-daemon-cleanup.patch

I'm also seeing this behavior when there is something wrong with the reverse DNS
lookups. For example:

Nov 08 10:54:36 alice dirmngr[1714]: handler for fd 5 started
Nov 08 10:54:36 alice dirmngr[1714]: DBG: chan_5 -> # Home: /home/dkg/.gnupg
Nov 08 10:54:36 alice dirmngr[1714]: DBG: chan_5 -> # Config:
/home/dkg/.gnupg/dirmngr.conf
Nov 08 10:54:36 alice dirmngr[1714]: DBG: chan_5 -> OK Dirmngr 2.1.15 at your
service
Nov 08 10:54:36 alice dirmngr[1714]: connection from process 7623 (1000:1000)
Nov 08 10:54:36 alice dirmngr[1714]: DBG: chan_5 <- GETINFO version
Nov 08 10:54:36 alice dirmngr[1714]: DBG: chan_5 -> D 2.1.15
Nov 08 10:54:36 alice dirmngr[1714]: DBG: chan_5 -> OK
Nov 08 10:54:36 alice dirmngr[1714]: DBG: chan_5 <- KEYSERVER
Nov 08 10:54:36 alice dirmngr[1714]: DBG: chan_5 -> S KEYSERVER
hkps://hkps.pool.sks-keyservers.net
Nov 08 10:54:36 alice dirmngr[1714]: DBG: chan_5 -> OK
Nov 08 10:54:36 alice dirmngr[1714]: DBG: chan_5 <- KS_GET --
0x2E8DD26C53F1197DDF403E6118E667F1EB8AF314
Nov 08 10:54:36 alice dirmngr[1714]: DBG: gnutls:L3: ASSERT:
mpi.c[_gnutls_x509_read_uint]:246
Nov 08 10:54:36 alice dirmngr[1714]: DBG: gnutls:L5: REC[0x7f7458003000]:
Allocating epoch #0
Nov 08 10:54:36 alice dirmngr[1714]: can't connect to 'oteiza.siccegge.de':
Invalid argument
Nov 08 10:54:36 alice dirmngr[1714]: error connecting to
'https://oteiza.siccegge.de:443': Invalid argument
Nov 08 10:54:36 alice dirmngr[1714]: DBG: gnutls:L5: REC[0x7f7458003000]: Start
of epoch cleanup
Nov 08 10:54:36 alice dirmngr[1714]: DBG: gnutls:L5: REC[0x7f7458003000]: End of
epoch cleanup
Nov 08 10:54:36 alice dirmngr[1714]: DBG: gnutls:L5: REC[0x7f7458003000]: Epoch
#0 freed
Nov 08 10:54:36 alice dirmngr[1714]: command 'KS_GET' failed: Invalid argument
Nov 08 10:54:36 alice dirmngr[1714]: DBG: chan_5 -> ERR 167804976 Invalid
argument <Dirmngr>
Nov 08 10:54:36 alice dirmngr[1714]: DBG: chan_5 <- BYE
Nov 08 10:54:36 alice dirmngr[1714]: DBG: chan_5 -> OK closing connection
Nov 08 10:54:36 alice dirmngr[1714]: handler for fd 5 terminated

This appears to be because the pool included 92.43.111.21, which has a PTR of
oteiza.siccegge.de, despite the fact that oteiza.siccegge.de has no A record.

There is no reason for dirmngr to be talking to the member of the pool by its
hostname, anyway -- it should make the connection by IP address, with the TLS
SNI set to the pool name.

The TCP specs demand something different and it is not the duty of dirmngr to do
something about it. You have ths behavour with all TCP connections and that is
also what makes TCP a reliable connection.

On Linux if would be possible to reduce the intial SYN retries but that is not
portable.

For --auto-key-retrieve I already implemented a --quick parameter in gpg to
advise dirmngr to give up earlier. The dirmngr side has not been implemented,
though.

It seems that it's related to ADNS.
I fixed error handling in the commits of 8a9341b and 6f1d812, so that correct
error from adns_synchronous will be logged.
I mean, the error message of "DNS query failed: System error w/o errno" will be
improved with correct error value.

I'm trying to understand this, but I'm not seeing it.

Here's the test i did. While recording all traffic from my machine on port 53
(the dns port), i ran:

    GNUPGHOME=$(mktemp -d) gpg-connect-agent --dirmngr

That interactive session looked like this:

> getinfo dnsinfo
OK - ADNS w/o Tor support
> getinfo tor
dirmngr[11713.1]: command 'GETINFO' failed: False
ERR 167772416 False <Dirmngr> - Tor mode is NOT enabled
> keyserver --clear
OK
> keyserver hkps://hkps.pool.sks-keyservers.net
OK
> keyserver --resolve hkps://hkps.pool.sks-keyservers.net
dirmngr[11713.1]: DNS query returned an error or no records: No such domain

(nxdomain)

dirmngr[11713.1]: resolve_dns_addr for 'hkps.pool.sks-keyservers.net':

'bone.digitalis.org'

dirmngr[11713.1]: resolve_dns_addr for 'hkps.pool.sks-keyservers.net':

'ip-209-135-211-141.ragingwire.net'

dirmngr[11713.1]: resolve_dns_addr for 'hkps.pool.sks-keyservers.net':

'gpg.nebrwesleyan.edu'

dirmngr[11713.1]: resolve_dns_addr for 'hkps.pool.sks-keyservers.net':

'host-37-191-220-247.lynet.no'

dirmngr[11713.1]: resolve_dns_addr for 'hkps.pool.sks-keyservers.net':

'cryptonomicon.mit.edu'

dirmngr[11713.1]: resolve_dns_addr for 'hkps.pool.sks-keyservers.net':

'zimmerman.mayfirst.org'

dirmngr[11713.1]: resolve_dns_addr for 'hkps.pool.sks-keyservers.net':

'sks.srv.dumain.com'

dirmngr[11713.1]: resolve_dns_addr for 'hkps.pool.sks-keyservers.net':

'b4ckbone.de'

dirmngr[11713.1]: resolve_dns_addr for 'hkps.pool.sks-keyservers.net':

'sks.spodhuis.org'

dirmngr[11713.1]: resolve_dns_addr for 'hkps.pool.sks-keyservers.net':

'oteiza.siccegge.de'

    S # https://cryptonomicon.mit.edu:443
    OK
    > keyserver --hosttable
    S # hosttable (idx, ipv6, ipv4, dead, name, time):
    S #   0       hkps.pool.sks-keyservers.net
    S #   .   --> 8 1 5* 3 4 2 10 9 7 6
    S #   1   4   bone.digitalis.org v4=212.12.48.27
    S #   2   4   ip-209-135-211-141.ragingwire.net v4=209.135.211.141
    S #   3   4   gpg.nebrwesleyan.edu v4=192.94.109.73
    S #   4   4   host-37-191-220-247.lynet.no v4=37.191.220.247
    S #   5   4   cryptonomicon.mit.edu v4=18.9.60.141
    S #   6   4   zimmerman.mayfirst.org v4=216.66.15.2
    S #   7   4   sks.srv.dumain.com v4=85.119.82.209
    S #   8   4   b4ckbone.de v4=193.164.133.100
    S #   9   4   sks.spodhuis.org v4=94.142.242.225
    S #  10   4   oteiza.siccegge.de v4=92.43.111.21
    OK
    >

So, the SRV lookup did indeed fail, but subsequent queries succeeded.

I've attached a pcapng file of the network traffic sent and received from the
described test.

The textual version of the traffic is:

query 0x311f SRV _hkp._tcp.hkps.pool.sks-keyservers.net
query response 0x311f No such name SRV

_hkp._tcp.hkps.pool.sks-keyservers.net SOA ns2.kfwebs.net

query 0x3120 A hkps.pool.sks-keyservers.net
query response 0x3120 A hkps.pool.sks-keyservers.net A 92.43.111.21 A

94.142.242.225 A 193.164.133.100 A 85.119.82.209 A 216.66.15.2 A 18.9.60.141 A
37.191.220.247 A 192.94.109.73 A 209.135.211.141 A 212.12.48.27

query 0xbd61 PTR 27.48.12.212.in-addr.arpa
query response 0xbd61 PTR 27.48.12.212.in-addr.arpa PTR bone.digitalis.org
query 0x384a PTR 141.211.135.209.in-addr.arpa
query response 0x384a PTR 141.211.135.209.in-addr.arpa PTR

ip-209-135-211-141.ragingwire.net

query 0xb36e PTR 73.109.94.192.in-addr.arpa
query response 0xb36e PTR 73.109.94.192.in-addr.arpa PTR gpg.nebrwesleyan.edu
query 0xcac3 PTR 247.220.191.37.in-addr.arpa
query response 0xcac3 PTR 247.220.191.37.in-addr.arpa PTR

host-37-191-220-247.lynet.no

query 0xd28b PTR 141.60.9.18.in-addr.arpa
query response 0xd28b PTR 141.60.9.18.in-addr.arpa PTR cryptonomicon.mit.edu
query 0x4be9 PTR 2.15.66.216.in-addr.arpa
query response 0x4be9 PTR 2.15.66.216.in-addr.arpa CNAME

2.0-27.15.66.216.in-addr.arpa PTR zimmerman.mayfirst.org PTR zimmermann.mayfirst.org

query 0x823b PTR 209.82.119.85.in-addr.arpa
query response 0x823b PTR 209.82.119.85.in-addr.arpa PTR sks.srv.dumain.com
query 0x3b0c PTR 100.133.164.193.in-addr.arpa
query response 0x3b0c PTR 100.133.164.193.in-addr.arpa PTR b4ckbone.de
query 0x9600 PTR 225.242.142.94.in-addr.arpa
query response 0x9600 PTR 225.242.142.94.in-addr.arpa PTR sks.spodhuis.org
query 0xed36 PTR 21.111.43.92.in-addr.arpa
query response 0xed36 PTR 21.111.43.92.in-addr.arpa PTR oteiza.siccegge.de

from a question on the ML

gpg-connect-agent --dirmngr

GETINFO dnsinfo

OK - ADNS w/o Tor support

GETINFO tor

ERR 167772416 False <Dirmngr> - Tor mode is NOT enabled

It is now patched in gpg4win and I think aheinecke pushed the patch also to linux.

The Bug iteself has been resolved with that patch, but is yet unreleased.

I'm on T2448 (aheinecke on Sep 05 2016, 02:14 PM / Roundup).

Jochen, is T2448 (aheinecke on Sep 05 2016, 02:14 PM / Roundup) something you could do?

Spoke to Werner, it is better to do ntbtls anyway.
Timeline is: this year, hopefully earlier.

For ntbtls also see: https://wiki.gnupg.org/NTBTLS

ntbtls is a development from Werner:
https://git.gnupg.org/cgi-bin/gitweb.cgi?p=ntbtls.git;a=summary

What about using https://tls.mbed.org/? At least until ntbtls is mature?

@werner, if you prefer ntbtls over gnutls, okay. Can you add a link to ntblts
and outline the next steps. We'd probably need tls support for the web key
directory as well, so this needs a solution.

Jochen: I'd rather you (manually) patch the dirmngr tarball included in
gpg4win-2 and create a testinstaller and try that one out.

I found the Problem in this issue and tested that the attached patch solves the
problem, yes It would have worked on GNU/Linux as the "b" has no effect there.
Finding out since when the problem existed appears moot to me and you would have
to check in dirmngr's SVN and likely always existed.

But maybe there are additional problems (as this is imo a very exotic feature)
so it would probably make sense to test it again on Windows before preparing the
next stable Gpg4win release.

Jochen, can you please find out:
a) Does this still work on GNU/Linux?
b) Did this work with elder Gpg4win version? With binary search you

should find out qickley when this broke.

I think there is no such keyword in GnuPG
2.1.x source code. _pgpkey-http only can be
found in GnuPG 1.4.

How about _pgpkey-http._tcp. record?

For version 2.1.15

root@47b54eb8e5bb:~/gnupg-2.1.15# gpg2 --version
gpg (GnuPG) 2.1.15
libgcrypt 1.7.3-beta
Copyright (C) 2016 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later https://gnu.org/licenses/gpl.html
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Home: /root/.gnupg
Supported algorithms:
Pubkey: RSA, ELG, DSA, ECDH, ECDSA, EDDSA
Cipher: IDEA, 3DES, CAST5, BLOWFISH, AES, AES192, AES256, TWOFISH,

CAMELLIA128, CAMELLIA192, CAMELLIA256

Hash: SHA1, RIPEMD160, SHA256, SHA384, SHA512, SHA224
Compression: Uncompressed, ZIP, ZLIB, BZIP2
root@47b54eb8e5bb:~/gnupg-2.1.15# gpg-connect-agent --dirmngr 'getinfo dnsinfo' /bye
OK - System resolver w/o Tor support
root@47b54eb8e5bb:~/gnupg-2.1.15# gpg2 --keyserver hkp://t1.zhsj.me --recv-keys 7DFBB2F2
gpg: keyserver receive failed: End of file
root@47b54eb8e5bb:~/gnupg-2.1.15# gpg2 --keyserver hkp://t2.zhsj.me --recv-keys 7DFBB2F2
gpg: keyserver receive failed: No keyserver available

For version 2.1.11
zsj@debian ~ $ gpg2 --version
gpg (GnuPG) 2.1.11
libgcrypt 1.7.3-beta
Copyright (C) 2016 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Home: ~/.gnupg
Supported algorithms:
Pubkey: RSA, ELG, DSA, ECDH, ECDSA, EDDSA
Cipher: IDEA, 3DES, CAST5, BLOWFISH, AES, AES192, AES256, TWOFISH,

CAMELLIA128, CAMELLIA192, CAMELLIA256

Hash: SHA1, RIPEMD160, SHA256, SHA384, SHA512, SHA224
Compression: Uncompressed, ZIP, ZLIB, BZIP2
zsj@debian ~ $ gpg-connect-agent --dirmngr 'getinfo dnsinfo' /bye
OK - System resolver w/o Tor support
zsj@debian ~ $ gpg2 --keyserver hkp://t1.zhsj.me --recv-keys 7DFBB2F2
gpg: key 7DFBB2F2: "Shengjing Zhu <i@zhsj.me>" not changed
gpg: Total number processed: 1
gpg: unchanged: 1
zsj@debian ~ $ gpg2 --keyserver hkp://t2.zhsj.me --recv-keys 7DFBB2F2
gpg: keyserver receive failed: No keyserver available
zsj@debian ~ $

Please run

gpg-connect-agent --dirmngr 'getinfo dnsinfo' /bye

this also affects version 2.1.15 (latest gpg4win beta) and 1.1.1 (latest gpg4win
stable)

Okay, if this transfers line endings because of the textmode read, it will
depend on the contents of the CRL in question. This explains why the defect was
not seen in earlier testing.

And pem does not work for this (I guess and tried on a GNU system).
It is okay that pem does not work, because this is a rarely used function I think.

D381: 870_0001-dirmngr-Open-CRL-s-in-binary-mode.patch

Woops didn't want to submit the last message as I had already looked into it myself.

This was reproducible using libksba's t-crl-parse with our root ca's clr but not
with an example file lying next to it.

Turned out that t-crl-parse opened the file in text mode. Conversion errors then
caused an invalid (too large read). When switching to binary mode it worked as
expected.

Dirmngr used the same. I've tested that crl parsing worked with the attached patch.

Now I get:
dirmngr[780]: error fetching certificate by subject: Configuration error
dirmngr[780]: crl_parse_insert failed: Missing certificate

But I think that is a different error as I get the same one when trying to
import the CRL on an empty homedir and parsing works now.

2.1.11 is not in the latest beta. Should be 2.1.13.

For testing / reporting it is also better to download the latest version from
gnupg.org
https://gnupg.org/download/index.html

I note that if i restart dirmngr it will just choose a new member of the pool
and that member will work.

This issue still stands with 2.1.13. It may be a bug or it may be a
documentation issue but I really do need this to be investigated and resolved,
please.

(that last comment was with 2.1.13)

fwiw, when i'm on a network that doesn't support IPv6, i get this:

0 dkg@alice:~$ gpg --send $KEYID
gpg: sending key REDACTED to hkps://hkps.pool.sks-keyservers.net
gpg: keyserver send failed: Invalid argument
gpg: keyserver send failed: Invalid argument
2 dkg@alice:~$

in dirmngr's logs:

2016-06-17 19:30:17 dirmngr[27999.2] DBG: gnutls:L3: ASSERT: mpi.c:246
2016-06-17 19:30:17 dirmngr[27999.2] DBG: gnutls:L5: REC[0x7f61f400fc10]:
Allocating epoch #0
2016-06-17 19:30:17 dirmngr[27999.2] can't connect to '2001:ba8:1f1:f2d4::2':
Invalid argument
2016-06-17 19:30:17 dirmngr[27999.2] error connecting to
'https://[2001:ba8:1f1:f2d4::2]:443': Invalid argument
2016-06-17 19:30:17 dirmngr[27999.2] DBG: gnutls:L5: REC[0x7f61f400fc10]: Start
of epoch cleanup
2016-06-17 19:30:17 dirmngr[27999.2] DBG: gnutls:L5: REC[0x7f61f400fc10]: End of
epoch cleanup

I think this instance of dirmngr was started on a network that has both IPv4 and
IPv6.

if i do:

     gpg-connect-agent --dirmngr killdirmngr /bye

and then try the --send again, it goes through fine.

Thanks for applying them.

@bernhard
I did not change it to LDAPv3 first to be conservative regarding maximum
compatibility with the least regression risk. And because I don't have a v2 Only
server available against which I could test.

Afaik LDAPv2 vs. v3 is pretty much irrelevant for the calls Dirmngr does.

Imo once OpenLDAP client libraries change behavior to use V3 by default this
should be enough for dirmngr.

Hi,
without having checked it, I think that dirmngr should try ldapv3 first.
The 2.1 versions for sure. For the others, a fallback should be good enough.
(Would it help if I go digging into specs somewhat to back that up?)

Thanks. I applied the two patches.

D373: 849_0002-dirmngr-Try-ldap-protocol-V3-as-fallback.patch

D374: 848_0001-dirmngr-Print-ldap-error-if-bind-fails.patch

I've analyzed the Problem dirmngr_ldap failed with a Protocol Error which was
hidden because the error output used errno instead of the ldap error.

Attached patch fixes the error output.

The Protocol error was because:
"historical protocol version requested, use LDAPv3 instead"

I'm not sure if dirmngr should try LDAPv3 first and fall back to LDAPv2 but the
Patch I'll attach in the next message adds a fallback to LDAPv3 if the ldap_bind
with the default protocol leads to a protocol error.

The endless activity / failing to notice that the dirmngr_ldap has already died
after the failure I leave for someone else (another issue I guess) as I've
already failed to fix this once :-)