Gpg4win 4.4:
When a keyserver is configured you can now check a box to directly upload the revocation there:
If no keyserver is configured, this is correctly not offered. Instead it is exported to the Documents folder, as the dialog then informs.
Gpg4win 4.4:
When a keyserver is configured you can now check a box to directly upload the revocation there:
with Gpg4win-Beta-94: about that speed on Windows, too.
Could be a bit more refined in the future, but this would be for another ticket.
Gpg4win-Beta-94: does not work here, but as the workaround still works, we have no regression. So I remove the vsd33 + gpgcom tag
Gpg4win-Beta-94: ok
Gpg4win-Beta-94: done
Gpg4win-Beta-94: works
Gpg4win-Beta-94: works
With Gpg4win-Beta-94 now all is fine, even own deactivated certificates are now shown (using the "Disabled" filter) in bold font
Fixed in Gpg4win-Beta-94
Well, T6893 was removed from this release, at least for the windows builds, therefore this ticket can not be tested on windows for vsd33
The certificates are shown
Yes, much improved, changes as described in https://dev.gnupg.org/T6933#181791
tested with Gpg4win-Beta-75++
Gpg4win-Beta-75++
Gpg4win-Beta-75++
Checked with Gpg4win-Beta-75++
It works, technically.
But for this to work you have to put the keyword "qual" at the end of the line of the system trustlist.txt file, the user trustlist.txt won't work. Example line:
Cancelling the password window works know.
With gpg4win-beta-75++ tryiing to import a secret key results in no import:
Error on generate keys on card is now: "Failed to generate new card keys and a certificate: Wrong PIN"
Tested with gpg4win-Beta-75++:
works in Gpg4win-Beta-75++
works with Gpg4win-Beta-75++
tested with Gpg4win-Beta-75++
Yeah, it's a dilemma. How about if we use the narrower formatting everywhere only starting from 6 or 7 words in the English string? Or some count of characters?
I suggest to make the following text changes for the VSD versions only:
I think that the card reader is not connected and there is no Scardsvr at this time.
And the card reader connection to USB port results invoking Scardsvr. Then, "SCD SERIALNO --all" gets success.
I believe this is a case of non-consumption of client. on Gpg4win-Beta-75 + updated GnuPG.
Setup: I had two cards connected, one Yubikey and one Netkey3.0 card. I rebooted windows and started Kleopatra. Nothing else.
Gpg4win-Beta-75: works
Name of the window is now "GnuPG Configuration Overview" and "gpgconf -X" is preselected and executed in the window.
Works, you now get an error message that the card can not be found.
With Gpg4win-Beta-75+
I agree, this is done, follow up Tasks will get new tickets